Tripp Lite 2200 VA UPS
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART2200RMXL2UP
SmartPro 2.2kVA Line Interactive Sine Wave UPS, 1920 watts, Extended-run & SNMPWEBCARD options, 2U
Rack/Tower, USB, Serial, EPO, 100/110/120V
Highlights
2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS; 0.87 power
factor
100/110/120V nominal output with 83V to 145V input; Sine wave output
USB, RS232, EPO & optional SNMP/Web card are available for simultaneous
use
Front panel status LEDs with load level and battery capacity display
Expandable runtime; 96% line-mode efficiency; 2 switched output load banks
NEMA 5-20P input; 4 NEMA 5-15/20R & 4 NEMA 5-15R outlets
Description
Tripp Lite's SmartPro SMART2200RMXL2UP 2U Rackmount Uninterruptible Power Supply (UPS) offers network-grade line interactive voltage
regulation, surge suppression and long lasting, expandable battery support for critical network hardware during blackouts, brownouts and extended
power failures. High .87 power-factor configuration with 1920 watt output capacity makes this UPS ideal for a variety of networking, industrial and
other high performance applications. 96% line power mode efficiency saves operating costs and BTU heat output. Runtime is expandable with
optional BP48V60RT3U and BP48V24-2U external battery packs. Maintains battery-derived sine wave AC output during power failures and extreme
voltage variations. Line interactive Automatic Voltage Regulation (AVR) provides two levels of voltage boost during brownouts and one level of
voltage cut during overvoltage conditions to maintain regulated 100 / 110 / 120V nominal output over an input range of 83-145V. Includes NEMA
5-20P input plug, NEMA 5-15R and 5-15/20R output receptacles. Network management interfaces support simultaneous communications via USB,
DB9 serial and optional SNMP/Web management accessory card slot. Optional SNMPWEBCARD offers remote management and control of the
UPS via built-in network interface. ENVIROSENSE accessory works with SNMPWEBCARD to report temperature, humidity and status of up to 4
optional SRWITCH door access sensors or other user supplied contact closure sensors. HID-compliant USB interface enables full integration with
built-in power management and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test
data and utility power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software with USB and serial cables.
Emergency Power Off (EPO) interface. Integrated 2-bank programmable PDU switching supports load shedding and remote-reboot of up to 2
individual connected devices. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs.
Audible alarm. Self-test. Supports 2U rackmount installation with a maximum depth of 19 inches. 4-post rackmount accessories included;
2-9USTAND tower stands and 2POSTRMKITWM two post rackmount or wallmount installation kit available. Field-replaceable, hot-swappable
internal batteries and external battery packs.
Package Includes
SMART2200RMXL2UP UPS system
4 post rackmount installation rails
PowerAlert software
USB, serial and EPO cabling
Features
SmartPro SMART2200RMXL2UP 2U rackmount UPS offers network-grade line interactive voltage regulation, surge suppression and
expandable battery support during blackouts, brownouts and extended power failures
Ideal for a variety of networking, telecommunications, industrial and other high performance applications requiring complete network-grade
line interactive UPS protection
High .87 power-factor configuration with 1920 watt output capacity supports the maximum continuous output current available from a 20A
120V circuit
96% line power mode efficiency saves operating costs and BTU heat output
Maintains fully regulated sine wave AC output during power failures and extreme voltage variations
Line interactive Automatic Voltage Regulation (AVR) maintains regulated 100/110/120V nominal output without using battery power during
brownouts and overvoltages from 83 to 145V
Includes NEMA 5-20P input plug, 4 NEMA 5-15R and 4 5-15/20R output receptacles
Two individually switched outlets support automatic load shedding and real time remote-reboot operations of 2 individual connected devices
Network management interfaces support simultaneous communications via USB, DB9 serial and optional SNMP/Web management
accessory card slot
Optional SNMPWEBCARD offers remote management and direct UPS control via built-in network interface
Optional ENVIROSENSE accessory reports temperature and humidity (requires SNMPWEBCARD)
ENVIROSENSE also supports the connection of up to 4 SRSWITCH door access sensors and user supplied contact closure monitoring
accessories
HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS
X
Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
Includes PowerAlert monitoring software with USB and serial cables
Emergency Power Off (EPO) interface
3-stage metered current monitoring and battery charge status LEDs
Utility power and voltage regulation LEDs, audible alarm and self self-test ability
Supports 2U rackmount installation with a maximum depth of 19 inches
4-post rackmount accessories included; 2-9USTAND tower stands and 2POSTRMKITWM 2 post rackmount or wallmount installation kit
available
Field-replaceable, hot-swappable internal batteries and external battery packs
Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
2200
Output kVA capacity
(kVA)
2.2
Output Watt Capacity
(watts)
1920
Output kW capacity
1.92
Output power factor
0.87
Output Capacity Details
Supports 1750 watts when set to 110V nominal; Supports 1600 watts when set to 100V nominal
Nominal Output
Voltage(s) Supported
100V; 110V; 120V
Nominal Voltage details
120V factory setting
Frequency compatibility
50 / 60 Hz
Output voltage regulation
(line mode)
120V (+6% / -14%); 110V (+6% / -12%); 100V (+11% / -7%)
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
4 5-15R outlet(s); 4 5-15/20R outlet(s)
Built-in controllable
switched load banks
Two switchable single-outlet 5-15R load banks
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
13.3A (120V), 14.6A (110V), 16.0A (100V)
Nominal Input Voltage(s)
Supported
100V AC; 110V AC; 120V AC
Nominal input voltage
description
Nominal voltage selection via back panel dipswitches
UPS input connection
type
5-20P
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical
Service
20A 100/110/120V
BATTERY
Full load runtime
(minutes)
5 min. (1920w)
Half load runtime
(minutes)
13 min. (960w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V24-2U (limit 1); BP48V60RT-3U (multi-pack compatible)
DC system voltage (VDC)
48
Battery recharge rate
(included batteries)
Less than 4.5 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC94-2U
Battery Access
Front panel battery access door
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains regulated line power output with an input voltage range of 83-145
(120V), 87-133 (110V), 83-121 (100V)
Overvoltage correction
Voltage reduction of 12% applies when input is between 127 and 145 (120V), 116 and 133 (110V), 111 and 121
(100V)
Undervoltage correction
Voltage boost of 12% applies when input voltage is between 95 and 108 (120V), 87 and 99 (110V), 83 and 90
(100V)
Severe undervoltage
correction
Voltage boost of 24% applies when input voltage is between 83 and 95 (120V only)
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches
support nominal voltage selection and charge rate
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
570
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form factors
supported with included
accessories
4 post 19 inch rackmount (mounting rail kit included)
Included mounting
accessory description
Adjustable mounting rail kit included
Installation form factors
supported with optional
accessories
2 post rackmount (2POSTRMKITWM); Wallmount (2POSTRMKITWM); Tower (2-9USTAND)
Primary form factor
Rackmount
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
3.5 x 17.5 x 19
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
8.9 x 44.4 x 48.3
Installed whole system
total rack space height
(rack spaces)
2U
Secondary form factor
Tower (requires 2-9USTAND)
UPS / Power Module
weight (lbs)
64
UPS / Power Module
weight (kg)
29.1
UPS Shipping
dimensions (height x
width x depth / inches)
9 x 23.5 x 20
UPS Shipping
dimensions (height x
width x depth / cm)
22.9 x 59.7 x 50.8
Shipping weight (lbs)
72
Shipping weight (kg)
32.7
UPS housing material
Steel
Cooling method
Fan
ENVIRONMENTAL
Operating Temperature
Range
+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.
Storage Temperature
Range
+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.
Relative Humidity
0 to 95%, non-condensing
AC mode BTU / hr. (full
load)
168.2
Battery mode BTU / hr.
(full load)
604.4
COMMUNICATIONS
Communications
interface
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network monitoring port
description
Supports detailed monitoring of UPS and site power conditions
PowerAlert software
Included
Communications cable
USB and DB9 cabling included
WatchDog compatibility
Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer time
5 milliseconds (line to battery mode); 1 millisecond (battery to line mode)
Low voltage transfer to
battery power (setpoint)
83 (120V), 87 (110V), 83 (100V)
High voltage transfer to
battery power (setpoint)
145 (120V), 133 (110V), 121 (100V)
SPECIAL FEATURES
Grounding lug
Back panel grounding lug
Cold Start (startup in
battery mode during a
power failure)
Cold-start operation supported
High availability UPS
features
Hot swappable batteries
Green & high efficiency
features
Greater than 95% efficiency - GREEN UPS; Individually controllable load banks
CERTIFICATIONS
UPS Certifications
Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A
(EMI)
WARRANTY
Product Warranty Period
(Worldwide)
2-year warranty, 3 year with registration. Note: registration is required for 3-year warranty.
Connected Equipment
Insurance (U.S., Canada
& Puerto Rico)
$250,000 Ultimate Lifetime Insurance
Related Items
Optional Products
Product Type
Related Model
Description
Qty.
Extended Warranties
WEXT5-2200-3000
5-Year Extended Warranty - For Smart Line-Interactive and Online
Tower or Rack models, 2200-3000VA or less
1
External Battery Packs
BP48V24-2U
BP48V242U - External Battery Pack for UPS System
1
External Battery Packs
BP48V60RT-3U
External Battery Pack and Cable. 3U, Expandable, Blue 2-Point
Connector
1
Power Distribution
PDU1220
Basic PDU / Power Distribution Unit - Safe, reliable power distribution
for critical networking equipment
1
Power Distribution
PDUB20
Dual source Power Distribution Unit / PDU with Manual Transfer Switch
enables Hot-swappable UPS Replacement in Critical Network
Applications
1
Power Distribution
PDUBHV20
Dual source Power Distribution Unit / PDU with Manual Transfer Switch
enables Hot-swappable UPS Replacement in Critical Network
Applications
1
Power Distribution
PDUMH20
Metered PDU / Power Distribution Unit- Safe, reliable power
distribution with digital current meter
1
Power Distribution
PDUMH20ATNET
Switched, Metered PDU with ATS - Power Distribution Unit with
dual-input Auto Transfer Switching, individual outlet control and SNMP
network interface
1
Power Distribution
PDUMNH20
Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
1
Power Distribution
PDUMNV20
Monitored PDU / Power Distribution Unit supports real-time remote
monitoring of load level, voltage and frequency with options for remote
environmental and security monitoring
1
Power Distribution
PDUMV20
Metered PDU / Power Distribution Unit - Safe, reliable power
distribution with digital current meter
1
Power Distribution
PDUMV20NET
Switched, Metered PDU with Remote Monitoring - 0U Vertical
Rackmount Power Distribution Unit for Networks with Individually
Switchable Outlets, Current Metering, Remote Monitoring and Control
1
Power Distribution
PDUV20
Safe, reliable power distribution for critical networking equipment
1
Rack Accessories
SRSWITCH
Magnetic Door Switch Kit (2-pack for front and rear doors; requires
ENVIROSENSE.)
1
SNMP Accessories
ENVIROSENSE
Monitors temperature, humidity and contact-closure inputs. (Requires
SNMPWEBCARD or switched PDU.)
1
SNMP Accessories
SNMPWEBCARD
For remote monitoring and control via SNMP, Web, or Telnet.
1
Software
WATCHDOGSW
WatchDog Service Monitoring / Reboot Software
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=4672.
Copyright © 2012 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising