The networked studio has arrived. Professional Networked Audio

The networked studio has arrived. Professional Networked Audio
Professional Networked Audio
The networked studio has arrived.
Ethernet for studio audio systems.
Those of us involved with broadcast audio studios have seen
tremendous evolution during the last decade. Reel-to-reels
have been pushed aside in favor of PC editors. PC delivery
systems have replaced CD players and cart machines, and
now we are smack inside the center of the conversion to
digital for mixing, routing, and processing.
Welcome to the networked broadcast studio. Welcome to the
world of Axia. Axia is a completely new approach to studio
audio. Using patent pending Livewire TM technology, Axia
networks utilize a framework of standard Ethernet hardware
to convey high-performance audio throughout an entire
But we are still using limited, old-fashioned schemes for
connecting all of these new pieces together. With technology
in flux, we find ourselves lashing-up a mishmash of analog,
both professional and consumer; digital, AES3 and MADI, and
audio file transfer over data networks. To do this we use XLR,
RCA, DB-9, DB-15, 1/4” phone, mini phone, RJ-45, fiber,
copper... Our industry is clearly ready for a new way to
interconnect studio components.
The Axia architecture is lightning-fast, with total input-to-output
latency of less than 1ms per network hop, making it possible
for operators to easily monitor microphone and other live
audio with virtually no discernable delay. PC-based audio
applications can send and receive digital audio via Ethernet,
eliminating sound cards completely.
Ethernet is probably already the most widely used digital audio
transmission method in radio facilities today. Computer audio
delivery is usually a client-server system with Ethernet
connecting the server and the studio computer. Why not take
this model one step further? Why not find a way to ensure
reliability and Quality of Service that would allow the use of
Ethernet as a low-cost, universal way to connect audio and
data for everything in our studio facilities?
The Axia network carries other forms of routine network traffic
such as program associated data (PAD) and communications
at the same time as the audio. By exploiting the capabilities
of modern Ethernet switching hubs, audio data is always first,
without ever missing a beat.
We invite you to a new way of thinking about studio audio
systems. Networking has changed the computer world forever.
The time is right for broadcast equipment to enjoy the many
benefits of networking.
Simple, elegant and low cost.
Livewire page 2
Replace all that discrete wiring with
simple, flexible and standard Ethernet.
The switch makes it possible.
Livewire is the core networking technology employed in all Axia products. Livewire
is the first audio network designed specifically for broadcast studios, conveying audio, control and data over standard Ethernet hardware.
Use ubiquitous and low-cost Ethernet as a universal studio interconnect. A single
CAT-6 or fiber reliably conveys multiple audio channels, control, program-associateddata, VoIP phone, and general computer data.
Multiple studios are easily joined. All audio sources are made available throughout
the entire plant. You don’t need an expensive cross-point routing switcher to have
all the benefits of one.
Livewire features extremely low latency, enabling real-time monitoring of live audio
sources. Per-link delay is less than 1ms for high-priority audio signals.
PCs are directly connected to the network. An IP-Audio driver emulates a sound card,
allowing PC audio applications to pass audio directly to and from the network.
Axia reduces costs by simplifying wiring complexity and replacing sound cards, cross
point switchers, patch bays, distribution amplifiers, line selection switches, etc. Taking
advantage of computer industry scale, Ethernet networked audio provides flexibility
at a surprisingly low cost.
Systems are based on switching Ethernet hubs to guarantee audio Quality of Service (QoS). Audio is prioritized and takes precedence over all other data types.
A 100Base-T segment can carry 50+ stereo channels of 48 kHz, 24-bit linear PCM audio; a 1000Base-T link or Gigabit fiber can carry 500+.
A Studio Engine, based on an Intel P4 running real-time Linux, provides mixing console functions at low cost. All connections into and out of the Studio Engine are via
a single Ethernet port.
Just as with traditional analog, Livewire is naturally scalable. It can be used to connect a pair of devices, or as a sophisticated infrastructure for an audio plant with
thousands of signals.
Switched Ethernet is an entirely different
architecture than previous network approaches.
Unlike a standard hub, a switch does not
flood all packets to all ports. Rather, it
only sends the appropriate packets to
specific ports. In this way, only necessary
traffic is allowed onto each network segment. This dramatically increases network payload and eliminates congestion.
Further, the switch allows for the
prioritization of message traffic. When
the switch encounters messages tagged
as high priority, it processes them before
any other messages. In this way, it is
possible for urgent/important traffic
such as audio to be conveyed over the
same segments as more routine traffic.
Livewire takes full advantage of the traffic management and prioritization capabilities of modern Ethernet switches. The
switch delivers Livewire packets only to
those ports wishing to subscribe, and prioritizes the audio packets so they take
precedence over all other traffic.
Livewire page 3
Axia Audio Nodes
With all these benefits, it’s easy to imagine future broadcast
gear providing Ethernet jacks instead of— or in addition to—
analog and AES-3 connections. Meanwhile, we are going
to need a way to convert conventional audio sources and
destinations to and from the Livewire network. Meet the
Livewire family of audio adapter nodes.
There are now five versions, each with a specific purpose.
Each of these 1RU units is equipped with a 100BT Ethernet
connection. When a node is connected to the Livewire network, it advertises the availailability and the attributes of its
signals to the rest of the network, allowing interested receivers to subscribe to the signals originating from this node.
Nodes can be placed physically near the audio and may
be distributed throughout a facility according to convenience. A unit placed within a studio can collect audio from
microphones and deliver audio to monitors and headphones, while another in the central equipment area can
enter network feeds, codecs, Telco remotes, etc., into the
system and provide convenient outputs for processors and
other terminal-room gear.
Livewire page 4
Each node contains a built-in auto-sensing, fanless power
supply, and the highest quality components to deliver superior audio performance with the reliability broadcasters
The microphone, line and AES nodes, each offers a multicharacter LED front panel that can display text labels to
make configuration and identification of devices on a network easy. In its normal operating mode, the LED’s display
confidence metering to show the audio activity on each of
the inputs and outputs.
The nodes run a version of Linux on an embedded
processsor for ultra-reliable network operations and extremely low delay. A built-in webserver enables remote configuration and control— all in an intuitive plain language
manner— via standard browser interface.
Utilizing the very best quality A/D/A converters, low-noise
components, each of the analog nodes offers superior audio specifications for high-end studio use.
A node for every need.
The Microphone Node has eight professional-grade microphone preamplifiers with phantom power and software-adjustable gain. It also contains eight balanced analog line outputs for convenient delivery of associated headphone and studio monitor feeds to the room in which the
mics are located. The inputs are on XLR connectors while the outputs
are on easy-to-install RJ-45’s.
Microphone Node, 8 preamp inputs and 8 stereo outs.
The Analog Line Node has eight balanced stereo inputs and eight balanced stereo outputs, all on RJ-45 connectors. The inputs are switchable
to accommodate consumer level -10dBv or professional level +4dBu. The
short-circuit protected outputs are capable of delivering up to +24dBu before clipping.
Analog Line Node, 8 stereo ins and 8 stereo outs.
The AES/EBU Node provides eight stereo digital AES-3 inputs and eight
AES-3 outputs. Sample-rate conversion is available on all of the inputs or
the unit can sync to a house clock. Like the mic and analog line nodes,
this device displays confidence metering for each of its inputs and outputs on the front panel which also provides an easy window to identify
and configure the system.
The Router Selector Node resembles the X-Y controllers used with those
expensive cross-point audio switchers. The LCD lists available sources
which can be scrolled and selected with the wheel. Eight radio buttons
provide instant access to programmed sources. Unlike the aforementioned controllers, the Router Selector Node also has audio output direct
to headphones and analog and AES-3 outputs. It even provides a convenient analog and AES-3 input, making this an ideal device for a production or news studio desiring to consume and create network streams.
A GPIO Node offers 8 logic ports, each with 5 opto-isolated inputs and 5
isolated outputs. A logic port can be associated with any input or output
and routed along with the audio for various control interface functions.
AES/EBU Node, 8 stereo AES3 inputs and 8 AES3 outs.
Router Selector Node, 1 input 1 output, mixed signal.
GPIO Node, 8 logic ports, each with 5 ins and 5 outs.
Livewire page 5
The Mixing StudioEngine.
All sources and destinations are accessible by the Livewire
network, making it possible to facilitate cross-point switching from any source to any destination.
This deceptively simple architecture opens the door to new
ways of mixing and processing audio signals. Specifically,
we are now able to build a mixing/processing engine that
subscribes to networked audio streams, modifies them and
presents the resulting streams back to the network for interested destinations.
The Axia StudioEngine is an extremely powerful mixing and
processing device, based on an Intel P4 processor. This is
a blazingly-fast and powerful processor, capable of surpassing even the largest dedicated-DSP embedded designs. Further, the hardware is ideally suited for a network-based architecture since all input and output streams are routed
through a single Ethernet connection.
Livewire page 6
In order to deliver the reliability and ultra-low latency required by the Axia network, we built our Studio Engine
around a very fast and robust version of the Linux real-time
operating system. Then we optimized our engine processing program so that total input to output latency is just a
few hundred microseconds.
Generally, one StudioEngine is required for each radio studio. Each engine is actually capable of outperforming the
very largest traditional consoles, with multiple simultaneous
inputs, outputs, mix-minus feeds, monitor signals, etc. Additionally, the Studio Engine can provide EQ for multiple
channels and has the headroom to support future features.
The front panel display on the StudioEngine provides confidence feedback on system operations at a glance, while
the selector knob makes it possible to set the engine IP
address right from the front.
Studio Control Surface
The StudioEngine performs all the mixing and signal processing functions that would have been performed in the
past by an audio console. Therefore, the traditional console is not needed in an Axia networked audio system.
However, operators still need to have control interfaces so
they can interact with the studio elements. The Axia
SmartSurface shown above is a Livewire-compatible control
surface. Designed for the needs of fast-paced live programming, SmartSurface provides users with the functions they
need in an uncluttered and intuitive format.
SmartSurface can save unique configurations (we call them
profiles) for each user, allowing different preferences, layouts and defaults for a variety of shows and talent. Loading a new profile can completely reconfigure a studio setup
instantly, allowing seamless transitions from show to show.
One of the most popular features is the way SmartSurface
handles mix-minus for phones and codecs. Every channel
has the ability to provide a mix-minus output automatically,
without any intervention from the operator. Operators simply select a phone or codec source and the backfeed is automatically generated based on preferences established
when the engineer configured the user profile. Finally, we
can eliminate a source of confusion and error for many
board operators.
In addition to console functions, SmartSurface provides controls and displays that interact with phone systems, codecs,
editors, PC playout systems, etc. In short, SmartSurface was
designed to be the key control interface for radio operators. A detailed SmartSurface brochure is available at
Livewire page 7
Get audio out of your PC. Really.
The Axia IP-Audio driver causes the network to
“appear” like a sound card to connected Windows
PC’s, facilitating easy interchange of audio to and
from delivery systems and audio editors via
Multiple channels are supported so that, for
example, delivery systems are able to send an
independent output from each ‘player’ to a
channel on the network and control surfaces can
have a fader for each.
The IP-Audio driver also provides a simple API
(Applications Programming Interface) that
delivery software developers can use to access the
stop-start functions from control surfaces that
have traditionally been provided by GPIO
Page 88
Livewire page
Here we see the networked studio taking shape. PC audio sources are fed to the
network. Audio terminals in the studio capture live sources and feed monitors
and headphones. Shared sources are in the terminal room as is the program feed.
The StudioEngine provides the mixing and processing for the SmartSurface.
So many applications...
Need to get a group of signals from one room to another without the cost and hassle of running discrete wires? One
Ethernet link can carry it all!
The Axia network completely replaces the need for a cross-point
audio switcher. Every source is available to every destination
on the network. And because the network is naturally scalable,
it can cost-effectively cross-couple a few studios... or a few
dozen. A single switch will support hundreds of crosspoints;
more switches can be ganged for virtually unlimited capacity.
An Axia audio node makes an excellent replacement for PC
soundcards (see sidebar page 8). With its high performance
A/D/A converters, onboard power supply and pro-grade specs,
this approach helps eliminate the problems plaguing internal
PC soundcards.
Livewire page 9
Questions and Answers
You say all Axia products use Livewire technology. What exactly is
Livewire? How does it compare to other audio networking systems?
Livewire is an audio networking system that allows real-time
uncompressed digital audio to be conveyed over standard Ethernet
hardware. There are a few alternative systems now on the market,
but Livewire is unique in several key ways: First, Livewire is extremely
low latency, about 80% faster than any other audio-over-Ethernet approach. This is especially important for broadcast facility operation,
where live monitoring and cascaded links are common. Second,
Livewire includes all the technology needed for practical studio applications: Sources are ID'd and advertised to receivers, GPIO over the
network is covered, etc. Third, Livewire connects directly to PCs — no
soundcard or other hardware is required.
All Axia studio products are Livewire-enabled. We offer you all the
pieces you need to build a modern broadcast studio. Audio adapter
Nodes, Engines, Surfaces, PC drivers. We are experienced broadcasters, so we know how to support radio studio applications.
But the Internet is a packet network with poor quality for audio.
Right. Internet bandwidth is not guaranteed, so there can be problems when there is not enough. But you completely own and control all the pieces of a Livewire system, so performance is fully reliable.
Are you sure this is robust enough for 24/7 operation? My Windows
networks sometimes have downtime.
Livewire equipment is based on tight, embedded hardware and software. The Ethernet switches we recommend are fully professional
devices with high reliability.
Can the network be used for general data traffic as well as audio?
Most certainly, should you choose to do so. The Ethernet switch naturally isolates traffic. You may even use one link for both audio and
data, since the audio is prioritized. This will probably be the case
when a PC is connected to the network — you will sometimes want
to download files, receive email, etc., in addition to the audio stuff.
So, what about that delay?
Do you use compression? I am concerned about codec cascading.
For live monitoring, such as when an air talent hears his own microphone in headphones, 10-15ms is the limit before noticeable problems. We've kept Livewire link delay to below 1ms, so a number of
links can be successfully cascaded. To put this in perspective, a normal professional A-to-D or D-to-A converter has about .75ms delay.
How can you promise live audio over Ethernet? Won't it drop out?
No. We wouldn't be proposing any system that wasn't full broadcast
quality. With Ethernet switching, each device owns all of the bandwidth on a link so there is no possibility of contention or audio loss.
If a node needs both audio and data, such as a PC running an audio editor and a web browser, audio is prioritized and always takes
precedence. Livewire has been proven rock-solid under extreme laboratory and real-world broadcast conditions for hundreds of hours
while carefully logging packet transmission.
Livewire page 10
Livewire audio is uncompressed 48kHz/24-bit. It would be possible
to have compressed streams sharing the Ethernet, but this is not a
part of Livewire.
What about connections to the Internet?
Livewire is intended for use within a facility on a switched Ethernet.
Normally, a gateway would be required to interface with the Internet
or other general-purpose IP network. And since we are using
uncompressed audio, the bandwidth requirements are probably too
high. The gateway could provide the required compression.
I've got a large facility. How many studios can I interconnect?
There is no practical limit. You may have as many studios and audio
channels as your Ethernet switch can support. Switches come in all
Questions and Answers
sizes, some with hundreds of ports. And multiple switches may be
cascaded to expand ports. We recommend that you use a switch
per studio to isolate any problems to a defined area. These are then
interconnected with a backbone. Switches may be physically associated with each studio or may be placed in a central location, as you
What about for smaller stations? This all sounds pretty sophisticated
for a simple set-up.
How do mix-minuses get generated?
This is a software function within studio processing engines. We provide one for each channel automatically without user intervention.
Tell me about your IP-Audio driver for workstations.
It makes the Axia network look like a sound card to a PC Windows
application. Many popular audio applications are already compatible
and more will be available soon.
Look at Ethernet for data applications. You have everything from a
few PCs in a small office to huge campus networks with thousands
of nodes. This is one of the reasons we went with Ethernet - you can
use it for big and small facilities. The technology and economics
naturally scale to suit the application size. We figure, in fact, that small
stations may benefit the most as they gain routing capability at a
very modest cost.
Are optical audio links supported?
This seems like a lot of IP to keep track of. Are there any administration tools?
Is Livewire standards-based?
All devices have a web browser control and monitoring capability.
Keep the IP numbers in a "favorites list" and you can easily check them.
How do analog sources become part of the network?
With Axia audio (adapter) nodes. These come in variants for line and
microphone applications. Over time, you can expect that codecs, hybrids, processors, etc., will offer direct Livewire connection ports.
How does your StudioEngine compare to other “engines?”
Most other engines are central to an entire system. Our engine is a
“network appliance,” only attached to the audio network when mixing or other DSP functionality is required. Because there can be
multiple distributed engines on an Axia network, there is no single
point of failure for the entire system. A single StudioEngine has all
the DSP capability to run the moxt complex studio console with ample
headroom for future features without requiring new hardware.
Livewire is fully compatible with 100BT and 1000BT copper and fiber
connection types. We imagine a common configuration to be switches
dedicated to studios with 100BT copper connecting terminals, engines, surfaces, etc. A fiber backbone connects the switches in order to share audio between the studios.
It runs on off-the-shelf Ethernet switches and components, but since
there is no standardized way to convey low-delay full-fidelity audio
over Ethernet, the audio protocol had to be developed by us. We do
support a higher-delay (5ms) mode for connecting to PCs, which uses
the Internet standard for streaming media. (The RTP format defined
in the IETF standards document RFC1889.)
Also, we needed to implement a protocol for tagging audio sources
with names and advertising these to receivers. Nothing was available off-the-shelf, so we had to invent something. Same for the GPIOemulation functions.
Are you planning to share information so that other vendors can
make gear that directly plugs to Livewire?
Yes. Software vendors for PCs can use our driver to easily make their
applications compatible. Makers of audio hardware would have to
coordinate with us to be compatible. Of course, you can use whatever equipment you want via the analog and AES Nodes.
Livewire page 11
Now with Axia, broadcast plants can take full advantage of
Ethernet for live audio, remote audio, associated control, data,
telephony and remote maintenance.
Axia Audio
2101 Superior Avenue, Cleveland Ohio 44114 USA
+1 (216) 241-7225
email: [email protected]
© Copyright 2003-2004 TLS Corporation. Features and specifications are subject to change without notice
or obligation. Livewire, SmartSurface, Telos, the Telos logo, Zephyr, Status Symbols are trademarks of TLS
Corporation. All rights reserved. All other trademarks are the property of their respective holders.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF