Tripp Lite SU3XR5 Specifications

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: [email protected]

Model #: SU30K3/3XR5

SmartOnline 30kVA On-Line Double-Conversion UPS, 3 Phase input / output with oversize battery set

Highlights

30,000 VA (30kVA) EXTENDED RUNTIME tower UPS with internal batteries

Saves valuable space and simplifies runtime scalability

3-phase hardwire input and output (120/208VAC). Wide input voltage correction range (96 - 144V AC / 166 - 250V AC)

IGBT technology and zero transfer time, on-line, double-conversion operation

3 communication ports, SNMP card slot and EPO jack

Description

Tripp Lite's SU30K3/3XR5 30kVA SmartOnline 3-Phase Intelligent, True On-Line Extended Runtime UPS System has been redesigned to save valuable space and simplify runtime scalability. Power and battery components are combined into a single, small-footprint module (the smallest in its class). A robust internal battery runtime capability can be easily extended by installing additional optional internal battery packs through the convenient front panel access door. The SU30K3/3XR5 features a large internal battery compartment that contains more internal batteries than the equivalent standard-run model (SU30K3/3) and more space to add additional optional internal battery packs to extend runtime. The SU30K3/3XR5 provides mission critical equipment with the highest level of power protection available. Large capacity 30,000VA/24,000 watt UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with zero transfer time offers compatibility with all equipment types. IGBT inverter technology produces output power with <3% THD (total harmonic distortion), allowing connected equipment to perform at its peak. A 3:1 crest factor safely supports a variety of equipment, even those with wildly-fluctuating power demands. Extremely efficient operation saves money by lowering electricity consumption.

Hardwire input and output connections support a variety of permanent or PDU style power connections. SU30K3/3XR5 features 120/208V AC,

3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 96 -144/166-250V AC. Frequency is 50 or 60 Hz (auto-selectable). SU30K3/3XR5 includes internal power and battery components in a single small-footprint tower module. Battery support can be extended with additional internal battery packs. A manual bypass switch as well as an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power when the UPS requires maintenance. Three built-in communication ports (RS-232, contact closure and AS-400) work with included PowerAlert Software to simultaneously provide shutdown commands and reporting on multiple servers without the need for costly accessories. An accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD) for remote shutdowns, reboots and more. A Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency Power Off

(EPO) interface supports remote emergency shutdown in large facilities. Front panel combination LCD/LED display alerts users to a variety of UPS

Package Includes

SU30K3/3XR5 UPS System (power and battery components in one module)

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Large internal battery compartment contains more internal batteries than the equivalent standard-run model (SU30K3/3) and more space to add additional optional internal battery packs to extend runtime.Saves valuable space: power and battery components combined into a single small-footprint module

Simplifies runtime scalability: convenient front panel battery access for expandable runtime with additional internal battery packs

True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

30,000VA/24,000 watt power capacity with 3-phase, hardwire 120/208V AC input/output connections

Features a wide input voltage correction range: 96 - 144/166 - 250V AC

61 minutes runtime at half load (11,300 watts) based on adding 3 SURBC2030 battery packs and 11 minutes runtime at full load (24,000 watts)

3:1 crest factor safely supports a variety of equipment, even those with wildly-fluctuating power demands

Extend runtime by installing optional internal battery packs (model # SURBC2030) through the front panel access door. SU30K3/3XR5 includes 5 internal battery packs and accepts 3 additional internal battery packs. A standalone battery module compartment with a 4 battery pack capacity and daisy-chain capability (model # SUBF2030) is available to further extend runtime.

3 communication ports (RS-232, contact closure and AS-400)

Slot for optional SNMP card (model # SNMPWEBCARD)

Manual bypass switch as well as an automatic bypass function ensures 100% availability of connected equipment by safely passing through AC power when the UPS system requires maintenance

Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval

Emergency Power Off button turns UPS output OFF and disables Bypass output

PowerAlert Universal UPS Power Management Software and 6 ft. communication cable included

Built-in Emergency Power Off (EPO) interface supports remote emergency shutdown in large facilities

Combination LED/LCD display

Start-up service program is recommended to enhance the reliability of the installation

Specifications

OUTPUT

Output Volt Amp

Capacity (VA)

30000

Output kVA capacity (kVA)

Output Watt

Capacity (watts)

30

24000

Output kW capacity 24

Output power factor 0.8

Crest Factor 3:1

120/208V; 3-Phase Wye Nominal Output

Voltage(s)

Supported

Frequency compatibility

Output voltage regulation (line mode)

50 / 60 Hz

+/- 2%

+/- 2% Output voltage regulation (Battery mode)

Built-in UPS output receptacles

Output AC waveform (AC mode)

Output AC waveform (battery mode)

INPUT

Rated input current

(at maximum load)

Hardwire

Sine wave

Pure Sine wave

90A (per phase, online)

Nominal Input

Voltage(s)

Supported

UPS input connection type

UPS input connection description

Phase

BATTERY

Full load runtime

(minutes)

120V / 208V 3 phase wye

Hardwire

120/208V (3-Phase, 4 Wire, wye)

3-Phase

11 min. (24kw)

Half load runtime

(minutes)

Expandable battery runtime

External battery pack compatibility

Expandable runtime description

25 min. (12kw)

Supports extended runtime with optional external battery packs

SURBC2030 ; SUBF2030 (holds 4 SURBC2030 )

Includes a battery housing with space for 3 internal SURBC2030 battery packs for extended runtime. Additional runtime capacity is available by adding SUBF2030 and additional SURBC2030 batteries - see runtime chart for specific recommendations

240 DC system voltage

(VDC)

Battery recharge rate (included batteries)

2 - 4 hours from 10% to 90%

Replacement battery cartridge

(internal UPS battery replacement)

Battery Access

SURBC2030

Front panel internal battery access door

Battery replacement description

Hot-swappable, replaceable batteries

VOLTAGE REGULATION

Voltage regulation description

Online, double-conversion power conditioning

Overvoltage correction

Maintains continuous operation without using battery power during overvoltages to 144 / 250 (3-Phase, 4-Wire, wye), reducing output within 2% of nominal

Undervoltage correction

Maintains continuous operation without using battery power during brownout / undervoltage conditions to 96 / 166

(3-Phase, 4-Wire, wye)

LEDS ALARMS & SWITCHES

LED Indicators 7 LED DISPLAY: AC input, bypass input, AC-DC charger, DC-AC inverter, AC output, bypass operation and battery operation

Front panel LCD display

SELECTABLE LCD DISPLAY: indicates a wide range of UPS operational and fault/warning conditions including operational mode, alarm/shutdown conditions, input/output voltage/frequency, battery voltage, load percentage and more (see manual)

Alarms Alarms warn against a variety of operational conditions: low-battery, overload, shutdown, bypass and more

Alarm cancel operation

Power-fail alarm can be silenced using alarm-cancel switch

Switches "ON" button turns UPS's inverter ON. "OFF" button turns UPS's inverter OFF. "Select" Button browses through items displayed on LCD screen. "Enter" button selects items displayed on LCD screen. "Select" and "Enter" buttons used simultaneously mute UPS alarms. "Battery Start" Switch cold starts the inverter. "Emergency Power Off" button turns

UPS output OFF and disables Bypass output. "Manual Bypass" switch bypasses the UPS's inverter during maintenance.

SURGE / NOISE SUPPRESSION

2032 UPS AC suppression joule rating

UPS AC suppression response time

Instantaneous

Yes EMI / RFI AC noise suppression

AC suppression joule rating

2032

Instantaneous AC suppression response time

PHYSICAL

Installation form factors supported with included accessories

Primary form factor

UPS / Power

Module dimensions in primary form factor (height x width x depth / inches)

UPS / Power

Module dimensions in primary form factor (height x width x depth / cm)

Installed whole system maximum rack depth (cm)

Tower

Tower

50.9 x 19.5 x 36.8

129.3 x 49.5 x 93.5

0

UPS / Power

Module weight (lbs)

UPS / Power

Module weight (kg)

UPS Shipping dimensions (height x width x depth / inches)

UPS Shipping dimensions (height x width x depth / cm)

Shipping weight

(lbs)

935

424.5

61.5 x 31 x 44.5

156.2 x 78.7 x 113

1152

Shipping weight

(kg)

Cooling method

UPS housing material

ENVIRONMENTAL

Operating

Temperature Range

523

Fans

Steel

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius.

Storage

Temperature Range

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius.

Relative Humidity

COMMUNICATIONS

Communications interface

0 to 95%, non-condensing

DB9 Serial; Contact closure; Slot for SNMP/Web interface

Network monitoring port description

RS232, contact closure and AS400 monitoring ports are supported by 3 separate DB9 ports

PowerAlert software Included

Communications cable

DB9 cabling included

LINE / BATTERY TRANSFER

Transfer time No transfer time (0 ms.) in online, double-conversion mode

Low voltage transfer to battery power (setpoint)

Maintains continuous operation during undervoltages as low as 96 / 166V AC (3-Phase, 4-Wire, wye). Below this point, output is maintained utilizing battery reserves.

High voltage transfer to battery power (setpoint)

SPECIAL FEATURES

Maintains continuous operation during overvoltages as high as 144 / 250V AC (3-Phase, 4-Wire, wye). Above this point, output is maintained utilizing battery reserves.

Cold Start (startup in battery mode during a power failure)

Cold-start operation supported

Automatic inverter bypass; Hot swappable batteries High availability

UPS features

CERTIFICATIONS

UPS Certifications

WARRANTY

Product Warranty

Period (U.S. &

Canada)

Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)

1-year limited warranty

Product Warranty

Period

(International)

2-year limited warranty

1-year limited warranty Product Warranty

Period (Mexico)

Product Warranty

Period (Puerto

Rico)

2-year limited warranty

Related Items

Required Products

Related Model

W05-BW1-247

Description

3-Phase UPS System (20k, 30k & 40k) Start-Up and On-Site Warranty Service

Programs

3-Phase UPS System (20k, 30k & 40k) Start-Up and On-Site Warranty Service

Programs

W05-BW1-247-1B

Optional Products

Related Model

ENVIROSENSE

SNMPWEBCARD

SUBF2030

SURBC2030

SU30KMBPK

W05-EW1-247

W05-EW1-247-1B

W05-SCBAS1

W05-SCBAS1-1B

W05-SCENH1

W05-SCENH1-1B

SUDC208V42P

SUDC208V42P30M

Description

Monitors temperature, humidity and contact-closure inputs. (Requires SNMPWEBCARD or switched PDU.)

For remote monitoring and control via SNMP, Web, or Telnet.

External Battery Frame for Extended Runtime - Compatible with Select SmartOnline

20kVA & 30kVA 3-Phase UPS System

Internal Battery Pack - Compatible with Select SmartOnline 20kVA & 30kVA 3-Phase

UPS System

3 Breaker Maintenance Bypass Panel for SU30K3/3, SU30K3/3XR5 and SU30K3/3INT

3-Phase UPS System (20k, 30k & 40k) Start-Up and On-Site Warranty Service

Programs

3-Phase UPS System (20k, 30k & 40k) Start-Up and On-Site Warranty Service

Programs

3-Phase UPS System (20k, 30k & 40k) - Basic Warranty Service Contracts

3-Phase UPS System (20k, 30k & 40k) - Basic Warranty Service Contracts - Includes primary battery cabinet plus one additional battery cabinet

3-Phase UPS System (20k, 30k & 40k) - Premium Warranty Service Contracts

3-Phase UPS System (20k, 30k & 40k) - Premium Warranty Service Contracts - Includes primary battery cabinet plus one additional battery cabinet

20-60kVA 3 Phase Power Distribution Center

20-30kVA 3 Phase Power Distribution Center with Integrated 3 breaker 208V Service

Bypass Switch

More information, including related products, owner's manuals, and additional technical specifications, can be found online at www.tripplite.com/en/products/model.cfm?txtModelID=3608 .

Qty.

1

1

Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.

1

1

1

1

1

1

1

1

1

Qty.

1

1

1

1