Kaiser Fototechnik | 3250 | Datasheet | Kaiser Fototechnik KR 90

Kaiser Fototechnik KR 90
Titelseite9079gb-00910pf.eps
C
M
Y
CM
MY
CY
CMY
K
1
09.09.10
19:46
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 13:27 Seite 2
Zigview S2: More Than
Just a Digital Viewfinder
Zigview S2 makes shooting in awkward
positions easy: the viewfinder image is
displayed live on the 2.5” TFT screen that
can be tilted by 180° horizontally
and 315° vertically.
Zigview S2 has several release modes.
Bulb shots can be done with pre-set
exposure time or manually with arbitrary
exposure time
The camera can also be released through
a motion sensor. This is very useful when
taking pictures in nature or when the
respective occurrence can not be monitored continuously.
• High-sensitive
270.000 pixel CCD sensor
• Viewfinder adapters for many
SLR cameras (digital and analogue)
• Multi-directional lock joint
• 2.5” 230.000 pixel LCD
• AV output for external monitor
• Receptacle for release cable
• Screen can be separated and removed,
remote view via transceiver cable
• Style mode with 10 style graphics
• Rechargeable Li-ion battery
• Size: 67 x 110 x 21 mm (2.6 x 4.3 x 0.8 in.),
weight: 115 g (4 oz.)
• Scope of supply: Zigview S2 digital viewfinder,
viewfinder adapter, 1.45 m (4.8 ft.) transceiver
cable (extendable), 1.5 m (4.9 ft.) video cable,
release cable, exchangeable battery, charger/mains adapter, carrying bag, manual.
• Optional accessory: LVC Cable (6262) for
converting Zigview S2 to a fully-fledged
Zigview S2 Live.
2
Two interval shot modes offer many possibilities to photograph moving situations
within fixed or given time periods.
Compatible with these cameras:
Zigview
S2 version
Canon 300D, 350D, 400D, 450D, 500D, 550D, 1000D,
Nikon D70s, D40(x)*, D50*, D60*, D70*, D3000*
S2A
6270
Canon 1D, 1D Mark II(N), 1D Mark III/IV, 7D, 10D, 20D, 30D, 40D, 50D,
D30, D60, Fuji S3Pro, S5Pro, Minolta 5D, 7D, Nikon D1, D1H, D1X, D2,
D2H(s), D2X(s), D80, D90, D200, D300(S), D5000, Pentax ist.., K-7, K10D,
K20D, K100D, K110D, K200D, K-m*, K-x*, Samsung GX-1L, GX-1S, GX-10,
GX-20, Sigma SD14, Sony Alpha 100, 200, 300, 350, 450, 500, 550, 700
S2B
6271
Canon 1DS, 1DS Mark II/III, 5D, 5D Mark II, Nikon D3, D3X, D3s, D700.
Also suitable for many analogue cameras.
S2C
6272
* IR transmitter IR 20 (optional accessory) is required, because camera has no port.
view
version
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 13:28 Seite 3
Zigview S2 Live: The LiveView
Remote Controller
Z
igview S2 Live is, so to speak, a multi-functional remote release
with viewfinder image control. It masters remote, long exposure and interval shooting , has a built-in motion sensor to shoot your
camera and sends the LiveView image of your camera to the place
where you stand. You can control the image even if you don't see
your camera and can release the shutter just at the right time.
• Viewfinder monitor with
LiveView image and multiple
release modes, e.g. for nature,
animal and sports photography.
Optional accessories for
Zigview S2 Live and Zigview S2:
• Especially useful for photos taken
over high obstacle or crowd, low
angle position, macro and repro
shots and for viewfinder control
and shutter release from distant
positions.
• Connects to the video port of
your camera via transceiver
cable, that can be extended up
to 100 m (109 yd.).
• High-resolution 2,5" TFT LCD
screen.
This special Battery
Cover (6288) has an
accessory shoe adap6288 ter with tripod thread.
Use this one to attach Zigview S2 or
Zigview S2 Live in remote operation to
the hot shoe of your camera or a tripod.
(Picture shows set-up with Bounce
Flash Shoe 1200).
• Long exposure and motion sensor
controlled shooting: The shutter is
released when the sensor discovers motion in the viewfinder
image or in dedicated parts of it.
Zigview S2 Live (6280) is compatible with these digital SLRs:
Canon 1D Mark III/IV, 1Ds MK III,
5D Mark II, 7D, 40D, 50D, 450D,
500D, 550D, 1000D, Nikon D3,
D3X, D3s, D90, D300, D300s,
D700, D5000, Pentax K-7, Sony
Alpha 300, 350
• AV port to connect an external
monitor.
• Release modes for interval shooting (basic and advanced interval
mode).
• Four-step zooming up to factor
2.0.
• Supplied with transceiver cable,
5 m (16.4 ft.) extension cable,
video cable, release cable,
exchangeable and rechargeable
battery, mains adapter/charger,
pouch and detailed manual.
• Zigview S2 Live can subsequently
be equipped with a sensor head
to adapt it to the viewfinder eyepiece of an SLR and can thus be
used with additional camera
models.
• To cover wider distances additional extension cables are available
as accessories for Zigview S2 Live
and Zigview S2: 5 m (16.4 ft.)
(6258), 10 m (32.8 ft.) (6259),
20 m (65.6 ft.) (6260) and 50 m
(164 ft.) (6282, for Zigview S2
Live only).
6284-86
Sensor head
S2 version
A
70
S2A
6284
71
S2B
6285
C
72
S2C
6286
The Sensor Heads S2A (6284), S2B
(6285) and S2C (6286) are needed to
convert a Zigview S2 Live into a Zigview S2 or to adapt it to a different type
of camera.
3
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:29 Seite 4
TWIN1: Not Only for Im
TWIN1 - The Wireless
and Wired Remote
Release for Your
Camera
Twin1 RF
Radio-Controlled Remote
Shutter Release with
separate receiver
- Applicable as RC remote shutter
release and cable release
- Working range up to 100 m
(330 ft.)
- Two-step release button, delay shot
(wireless) and bulb shot mode
- Built-in flashlight LED
NEW
- Receiver with LED release control
- Receptacle for release cable
- Operation frequency: 2.4 GHz
- Small and compact receiver (30 x
40 x 25 mm / 1.2 x 1.6 x 1 in.)
6161
- Includes 1 m (39 in.) release cable
Twin1 R3/R4
IR Remote Shutter Release for
cameras with built-in receiver or
as a kit with a separate receiver
TWIN 1 R3/R4 transmitter
- Applicable as IR remote shutter release
and cable release (for exceptions see survey below)
- Working range up to 100 m (330 ft.) with
separate receiver, 50 m (165 ft.) (Nikon,
Pentax, Samsung) or 25 m (82 ft.) (Canon)
with cameras with built-in receiver
- Two-step release button, delay shot
(wireless) and bulb shot mode
- Built-in flashlight LED
- Includes 1 m (39 in.) release cable and
key ring
R3
TWIN1 R3 receiver (6163-65 sets)
- Two-sensor head, rotates by 180°
- Two red LEDs for release control
- Receptacle for release cable
- Size: 28 x 60 x 30 mm /
1.1 x 2.4 x 1.2 in.
6163
R4/RF
TWIN1 R4 receiver (6168-71 sets)
- Streamlined design
- Two red LEDs for release control
- Size: 30 x 40 x 25 mm /
1.2 x 1.6 x 1 in.
TWIN1 R4N receiver (6167 set)
- Extremely small and light-weight
(6 g / 0.2 oz.)
- Red LED for release control
- Powered by camera, needs
no extra battery
- Size: 15 x 15 x 22 mm /
0.6 x 0.6 x 0.9 in.
Product survey
Canon 300D, 350D, 400D, 450D, 500D, 550D, Pentax ist.., K-7, K10D,
K20D, K100D, K110D, K200D, Samsung GX-1L, GX-1S, GX-10, GX-20
6169/6178
R4N
R4N
6167
RF system
R3 system
R4 system
6177
6161*
6168
6161*
Nikon (IR only, no accessory terminal): D40(x), D50, D60, D70, D3000,
Pentax (IR only, no accessory terminal): K-m, K-x
Canon 1000D, Sigma SD14
6177
6168
6162*
Nikon D70s, D80, D90, D5000
Canon 1D, 1D Mark II(N), 1D Mark III/IV, 1DS, 1DS Mark II/III, 5D,
5D Mark II, 7D, 10D, 20D, 30D, 40D, 50D, D30, D60
6178
6163
6169
Nikon D1, D1H, D1X, D2, D2H(s), D2X(s), D3(X/S), D200,
D300(s), D700, F5, F6, F100, Fuji S3Pro, S5Pro
6179
6164
6167
(R4N)
Sony Alpha 100, 200, 300, 350, 450, 500, 550, 700, 850, 900,
Minolta 5D, 7D
6180
6165
6170
Leica Digilux 2/3, V-LUX1,
Panasonic G1, GF1, GH1, G2, G10, FZ20, FZ30, FZ50, L1, L10, LC1
6181
* only for cameras with built-in IR receiver, supplied without separate receiver
4
6171
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:29 Seite 5
r Immediate Release
TWIN1 ISR The Multifunctional
Remote Shutter Release
• for interval exposure
• for long exposure
• for timer-controlled exposure
• for continuous shooting
Release button lock
Set up button
Illumination button
Normal shutter release works also with
empty or without battery. Delay start is supported. Timer and interval time ranges from
1 second to 99 hours, 59 minutes, 59 seconds. Exposure numbers range from 1 to
9.999. 4-way-operation button. All buttons
can be locked to prevent unintentional operation. Beep sound can be switched off. Low
battery warning.
Navigation button
- Battery: 3V (CR 2032)
Enter button
- Operating time: approx. 2 months
- Release cable length: approx. 1 m (39 in.)
Release button
Display panel
- Weight: 26 g / 0.9 oz. (incl. batteries)
Cable connection port
Product Survey
6131 Twin1 ISR iC, for Canon 1D, 1D
Mark II(N), 1D Mark III/IV, 1DS, 1DS
Mark II/III, 5D, 5D Mark II, 7D, 10D,
20D, 30D, 40D, 50D, 300D, 350D,
400D, 450D, 500D, 550D, 1000D,
D30, D60, Pentax ist.., K-7, K10D,
K20D, K100D, K110D, K200D,
Samsung GX-1L, GX-1S, GX-10,
GX-20, Sigma SD14
6133 Twin1 ISR iN, for Nikon D1, D1H,
D1X, D2, D2H(s), D2X(s), D3(X/S),
D70s, D80, D90, D200, D300(s),
D700, D5000, Fuji S3Pro, S5Pro
6134 Twin1 ISR i04, for Sony Alpha 100,
200, 300, 350, 450, 500, 550, 700,
850, 900, Minolta 5D, 7D
6135 Twin1 ISR i07, for Leica Digilux 2/3,
V-LUX1,Panasonic G1, GF1, GH1,
G2, G10, FZ20, FZ30, FZ50, L1,
L10, LC1
Battery cover
Intervall timer icon
Exposure count icon
Exposure time icon
Timer icon
Operation run indicator
Beep sound On/Off icon
Time indicator
Battery-low icon
Illuminated triple-spaced LCD.
Three types of display mode.
Easy user interface for all settings.
Hold indicator
Exposure count icon
Display mode
Set up icon
5
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:29 Seite 6
More to
Release!
TWINLINK T2D:
A Combined
Radio Frequency
and Infrared
Flash Trigger
• two simultaneous triggering
signals for high operational
reliability
• for studio and camera flash
systems
Set comprising transmitter and receiver for wireless triggering of studio and camera flashguns.
Simultaneous triggering via 2.4 GHz radio frequency and infrared signals using eight high performance LEDs. 16 user selectable channels.
Transmitter and receiver with LED panels that can
be illuminated and external aerials. Automatic
power cut-down after pre-determined time.
Transmitter can be attached using the camera's
hot shoe or with an adhesive accessory shoe
mount in a convenient location. Receiver with tripod thread and mounting magnets for attachment
on metal surfaces or via an adhesive metal plate supplied with the set. Receiver has a hot shoe and trigger cable terminals for PC and 2.5 mm jack-plug.
Battery or mains operation.
- Max working range: approx. 50 m (165 ft.)
indoors, approx. 200 m (660 ft.) outdoors.
- Max. sync. speed: 1/250 sec. (depending on
camera and flash)
- Batteries: Transmitter: 2x CR 2032, receiver:
3 x AAA (primary or rechargeable)
- External power supply: Mains adapter/charger for
receiver only (will also charge rechargeables).
- Dimensions: Transmitter: 40 x 68 x 35 mm
(1.6 x 2.7 x 1.4 in.), Receiver: 50 x 80 x 25 mm
(2 x 3.1 x 1 in.)
NEW
- Weight: Transmitter: 35 g (1.2 oz.), Receiver: 53 g
(1.9 oz.)
TWINLINK T100A:
Product survey
6140 TwinLink T2D
Receiver and transmitter. Includes
2 aerials, PC cable, 2.5/3.5 receiver
cable, 3.5/6.3 adapter plug, adhesive
accessory shoe, adhesive metal
plate, AC power adapter, 3 AAA
batteries, 2 CR 2032 batteries,
receiver fixture clip
6141 TwinLink T2RxD
Additional receiver for TwinLink T2D
6138 TwinLink T100A
Radio-controlled flash trigger for
compact studio flashes, transmitter
and receiver, 2.5-3.5 release cable,
3.5-6.3 adapter plug, adhesive accessory shoe base, adhesive metal plate,
CR 2032 battery, receiver fixture clip
6139 TwinLink T100RxA
Additional receiver for TwinLink
T100A
The 2.4 GHz RC Wireless
Flash Trigger for Studio Flashes
• Receiver uses AC mains power supply
• 16 channels for interference-free operation
Set comprising transmitter and receiver for wireless
triggering of compact studio flashes. Receiver uses
AC mains power supply via the flash unit’s mains
lead. 16 channel support.
- Working range: indoor: approx. 30 m
(100 ft.) outdoor: approx. 70 m (230 ft.)
Transmitter and receiver use external aerials.
- Battery (transmitter): 2x CR 2032 (3V)
The transmitter can either be mounted directly to
the camera hot shoe or may be positioned in an
alternative location using an adhesive hot shoe
mount supplied with the unit. The receiver can be
easily mounted on metal surfaces using a magnetic
adapter or just freely suspended on the mains
cable. 2.5 jack and PC connectors for release cable.
6
- Max. sync speed: 1/250 sec. (depending
on camera and flash)
- Operating voltage (receiver): 110-240 volt
- Dimensions: Transmitter: 28 x 51 x
25 mm (1.1 x 2 x 1 in.), Receiver:
46 x 76 x 34 mm (1.8 x 3 x 1.3 in.)
- Weight: Transmitter: 12 g (0.4 oz.),
Receiver: 60 g (2.1 oz.)
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:41 Seite 7
High-Level
Meeting
NEW
6385
Accessory Shoe Adapter
1215
Enables mechanical connection of accessories
with standard ISO foot
on cameras with Sony/
Minolta flash shoe.
Flexible tongues on both
sides provide for tight fit.
Duplex Screw-In
Spirit Level
Mounts in between
camera and tripod.
6387
Spirit Levels:
Analogue and Digital
NEW
Duplex Spirit Level
With twin levels and mounting feet for landscape and
portrait position.
6380
Spirit Level
One level each for vertical and
horizontal shooting position.
With mounting shoe and 1/4”
tripod bush.
Spirit Level
with circular bubble,
self-adhesive. Can
also be screwed on.
6386
Action Level
Digital spirit levels for use in portrait and landscape formats. LEDs of different colors
for indication. Especially useful for levelling the camera at night, at a high position
for over head shots and in all situations where a traditional spirit level would be difficult or impossible to see. Brightness and sensitivity
can be adjusted. Fits into standard hot shoe.
Action Level
Compact design. Does
not interfere with most
camera's pop-up flash.
Weighs only 5 grams
(0.2 oz.).
6384
6383
Action Level Sound
Similar to Action Level,
but with additional beep
sounds for indication (can
be switched off) and with
a magnetic base mounting panel for attaching
on other flat surfaces.
Action Level Cross
Cross indicator with 13 LEDs for
simultaneous two-dimensional
6379
indication. Additional 7 LED side
level indicator. Optional remote display (6379) can be
connected when camera is in an awkward position.
6378
NEW
Professional Camera Hand Strap
Suitable for larger compacts and
(D)SLRs. Soft padded genuine
leather hand support with adjustable fixtures. Camera mounting
plate with tripod thread and foldable legs providing a secure
stand when put on table or floor.
6701
Outdoor Photo Gloves
NEW
Handy Stuff
Diameter: approx. 32 mm (1.3 in.)
Weight: approx. 6 g (0.2 oz.)
Half finger gloves with mitten cover and thumb
cover provide for perfect mobility, secure grip
and ideal protection against cold. Mitten and
thumb cover can be folded back and fastened
with a Velcro strip. Made of breathable, skinfriendly fleece with anti-slip coating.
6370: Size M
6372: Size L
7
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 13:28 Seite 8
This?
. . .or That?
„digiShield“ LCD Glare Shield
• digiShield shields lateral and angular incidence of light from the LCD monitor and
improves the visibility of the monitor
image.
• digiShield folds down completely and
serves also as a cover and a screen
protector.
• digiShield fits almost all digital compacts
and is attached to the tripod socket.
• digiShield is available for 2.7” (digiShield2)
and 3.0” LCDs (digiShield3) in silver and in
black.
• digiShield has coil spring supported side flaps
which open automatically.
• digiShield3 flips up completely to ease the
operation of touch screen LCDs.
6054
6074
6054
NEW
6075
6055
NEW
Screen size
(diag.):*
2,7” (6,9 cm) 2,7” (6,9 cm)
3,0” (7,6 cm)
3,0” (7,6 cm)
Designation:
digiShield2
digiShield2
digiShield3
digiShield3
Colour:
silver
black
silver
black
6074
* eventually minor border covering with 6.9 cm (2.7”)
6075
digiShield DSLR
is the glare shield for your digital SLR. It comes
with a clear plastic pane to protect the LCD and
clips on the back of the camera body.
Available models:
6404: for Canon 40D/50D
6405: for Canon 450D/500D
6406: for Canon 5D Mark II
NEW
6407: for Canon 7D
6411: for Nikon D40/D40x/D60
6412: for Nikon D90
6416: for Nikon D300/D300s
6417: for Nikon D700
6424: for Sony Alpha 200
6427: for Sony Alpha 700
8
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 18:54 Seite 9
Protective Shield:
Screen Protectors for the
Camera LCD
"Standard" LCD Screen Protective Film
Anti-Reflective
LCD Screen
Protective Film
High-quality clear film for use
with digital cameras. Protects
the screen from scratches, dirt
and fingerprints. Glare-free by
anti-reflective layer. Has UV
protection and hard coating,
optimized for touch-screens.
Attaches by adhesion due to
silicon coating. Easy to apply,
no bubbling. Can be removed
without residues. 1 piece.
6085:
6086:
6087:
6090:
6092:
for
for
for
for
for
6,4 cm (2,5“) screens
6,9 cm (2,7“) screens
7,6 cm (3,0“) screens
8,9 cm (3,5“) screens
10,2 cm (4,0“) screens
UV protection
Scratch
resistent
Effective
adhesion
Bubble-free
application
Touch
optimised
Removable,
no residues
Antireflection
Hardcoat
UV filter
PET
Silicon
Backing layer
For use with digital cameras, mobile phones and PDA's
(6076 also for GPS). Protects the screen from scratches, dirt
and fingerprints. Also for touch-screens. Can be removed
without residues.
6076: Set with three 4 x 3" (10 x 8 cm) sheets each, with
cutting lines for required size. Comes with
cleaning cloths and a squeegee card to apply the
film.
6078: For 3" LCD screens. Can be cut to fit smaller
screens. Rounded corners. 3 pieces.
Rodenstock HR Digital Filters
NEW
Super Multi Coating for neutral colour rendition, scratch
resistance and impassivity against dust, water or other
liquids. Extremely thin filter glass for high transmission
rate. Slimline brass mount for unvignetted photographs,
also with wide angle lenses.
Rodenstock Digital Pro Filters
Well-priced filter with multi coating. Neutral colour rendition. Slimline aluminium mount for unvignetted photographs, also with wide angle lenses.
Also available custom-fit for these
digital SLRs and CSCs:
6613:
6614:
6615:
6616:
6617:
6620:
6621:
6622:
6623:
for
for
for
for
for
for
for
for
for
No color tint
Antiglare /
Clear View
NEW
Canon 550D
Canon 500D / 450D
Canon 50D / 40D *
Canon 7D *
Canon 5D Mk II *
Nikon D90 *
Nikon D700 *
Nikon D5000
Nikon D300(s) *
6624:
6626:
6627:
6630:
6631:
6632:
6634:
6635:
6636:
for
for
for
for
for
for
for
for
for
Nikon D3000
Olympus E450 / E420 / 520
Olympus E620
Panasonic GH1 / G1
Panasonic GF1
NEW
Panasonic G2
Sony Alpha 230/290/450
Sony Alpha 330/380
Sony Alpha 500/550
* includes protective film for control panel
HR Digital
UV filters
17549
17552
17555
17558
17562
17567
17572
17577
17582
17586
17595
HR Digital
circular
polarizer
17649
17652
17655
17658
17662
17667
17672
17677
17682
17686
17695
ø
49
52
55
58
62
67
72
77
82
86
95
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Digital pro
UV filters
17749
17752
17755
17758
17762
17767
17772
17777
17782
Digital pro
circular
polarizer
17849
17852
17855
17858
17862
17867
17872
17877
17882
9
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:05 Seite 10
You Must
Have This!
I
t is indispensable to protect lens and sensor against
dust and dirt. A lens hood should also be at hand at
any time. That is why all these “must-have” products
have met here.
6890
Lens Hoods
Designed for the lenses of digital SLRs.
Made of impact-resistant plastic.
6880: C60, for Canon EF-S 1855/3.5-5.6 IS II / USM, Canon EF
28-90/4-5.6 II (USM), Canon EF
28-80 (II / USM), Canon EF 2255/4-5.6
6881: C73, for Canon EF 2485/3.5-4.5 (USM)
3-in-1 Lens Hoods
for lenses with 28 to 200 mm focal length (35 mm equivalent).
Made of matte black rubber, foldable. With light baffles. Metal
screw-in mount. Filter thread.
6882: C78, for Canon EF 28135/3.5-5.6 IS USM
6883: C71, for Canon EF 50/1.4
USM
6884: C65III, for Canon EF 100300/4.5-5.6 (USM), Canon EF
85/1.8 (USM), Canon EF 100/2.0
USM, Canon EF 135/2.8 soft
focus, Canon EF 70-210/3.5-4.5
USM
NEW
6885: C65B, for Canon EF 70-300/
4.5-5.6 DO IS USM, Canon EF 70300/4-5.6 IS USM
6886: C67B, for Canon EF-S
60/2.8 Macro USM
6820: ø 49 mm
6821: ø 52 mm
6822: ø 55 mm
Camera Body Caps
Standard
Telephoto
6823: ø 58 mm
6824: ø 62 mm
6825: ø 67 mm
6887: C62, for Canon EF 50/1.8 II
6826: ø 72 mm
6827: ø 77 mm
Lens Rear Caps
Lens Hoods for Pancake Lenses
NEW
Wide angle
Made of matte black
rubber. Rotating connecting ring with metal
mount and locking screw.
6520:
6521:
6522:
6523:
6524:
6525:
6526:
6527:
10
for
for
for
for
for
for
for
for
Canon FD
Canon EOS
Minolta MD
Sony/Minolta AF
M 42
Nikon
Olympus OM
Pentax K-bayonet
6530:
6531:
6532:
6533:
6534:
6535:
6536:
6537:
for
for
for
for
for
for
for
for
Canon FD
Canon EOS
Minolta MD
Sony/Minolta AF
M 42
Nikon
Olympus OM
Pentax K-bayonet
6888: C60T, for Canon EF-S 55250/4-5.6 IS, Canon EF 75-300/
4-5.6 III (USM), Canon EF 90300/4.5-5.6 (USM)
6889: C73B, for Canon EF-S 1785/4-5.6 IS USM, Canon EF-S
18-135/3.5-5.6 IS
6890: C78D, for Canon EF-S 18200/3.5-5.6 IS, Canon EF 28200/3.5-5.6 (USM)
6891: C83, for Canon EF-S 1022/3.5-4.5 USM, Canon EF 1740/4.0L USM, Canon EF 2035/3.5-4.5 USM, Canon EF 16-35/
2.8L USM (old version), Canon EF
17-35/2.8L USM
6892: C83J, for Canon EF-S 1755/2.8 IS USM
6893: N32, for Nikon AF-S 18105/3.5-5.6 G ED VR, Nikon AF-S
18-135/3.5-5.6 IF-ED, Nikon AF-S
DX 18-70/3.5-4.5G IF-ED
6894: N33, for Nikon AF-S DX
18-55/3.5-5.6G ED / ED II / VR
6829: for Panasonic lens Lumix G
1.7/20 mm. 46 mm filter
thread.
6831: for Olympus Pen lens
M.Zuiko Digital 2.8/17 mm,
also suitable for Sony
Handycam. 37 mm filter
thread.
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:05 Seite 11
You Should
Have This!
6601: ProDisk mini
White balance filter for
lenses up to 6 cm (2.4 in.)
diameter. Dimensions (folded down): 103 x 73 x 10
mm (4.1 x 2.9 x 0.4 in.),
weight: 75 g (2.6 oz.)
ProDisk
C
ombination of white
balance, grey card and
colour reference in a slim, foldable
plastic housing. Colour card and grey card
located in lower respectively upper cover,
translucent white balance filter with special
surface pattern.
6602: ProDisk II
White balance filter for
lenses up to 9 cm (3.5 in.)
diameter. Dimensions (folded down): 145 x 101 x 11
mm (5.7 x 4.0 x 0.4 in.),
weight: 135 g (4.8 oz.)
„Vivicap“ White Balance Filter
Snap-on filter with specially
designed prism structured
surface for white-balancing
of digital cameras and camcorders. Easy to use clamping mechanism provides for
quick installation and removal.
Serves also as a lens cap and can
also be attached when a lens hood
is used.
„Snap-On” Lens Caps
Filter Adapter Rings
Reliable hold by clamp-on design. Includes loss
protection. Can also be used with lens hood
mounted.
F
6833:
6834:
6835:
6836:
ø
ø
ø
ø
49
52
55
58
mm
mm
mm
mm
6837:
6838:
6839:
6840:
ø
ø
ø
ø
62
67
72
77
mm
mm
mm
mm
or mounting filter and
front attachments to
lenses with deviating
mounting threads.
Precision metal rings
with dull black surface.
6605:
6606:
6607:
6608:
6609:
6610:
6611:
ø
ø
ø
ø
ø
ø
ø
52
55
58
62
67
72
77
mm
mm
mm
mm
mm
mm
mm
(Lens thread – Filter thread)
6547:
6584:
6585:
6586:
6588:
6589:
6542:
6543:
6544:
6591:
6592:
6593:
6594:
6548:
6595:
6596:
6549:
6545:
6546:
6597:
27 - 37
28 - 37
30 - 37
30,5 - 37
34 - 37
37 - 43
37 - 46
37 - 49
37 - 52
39 - 43
40,5 - 43
40,5 - 46
40,5 - 49
40,5 - 52
43 - 46
43 - 49
43 - 52
46 - 49
46 - 52
46 - 55
6550:
6551:
6552:
6555:
6556:
6557:
6558:
6561:
6562:
6563:
6564:
6565:
6567:
49
49
49
52
52
52
52
55
55
55
55
58
58
-
52
55
58
49
55
58
62
52
58
62
67
52
55
6568:
6566:
6569:
6570:
6571:
6572:
6573:
6574:
6575:
6576:
6577:
58 - 62
58 - 67
62 - 58
62 - 67
62 - 72
62 - 77
67 - 58
67 - 72
67 - 77
72 - 58
72 - 77
11
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:34 Seite 12
Quik Pod - for Snapshots at Arm’s
Y
Length
our arm is too short? Quik Pod can help – no matter whether you will take a picture of yourself or
just want to shoot over the head of crowds. Quik Pod
will give your arm 46 cm (18 in.) of additional length,
will convert to a table top tripod and is ready to become your all-time companion.
Quik Pod is an extendable hand-held
tripod for cameras and camcorders. It
has a lockable ball head, a camera support with 1/4” tripod thread and a small
mirror showing you roughly what the
camera will see. It is easy to extend and
to retract.
Specifications
Length (extended): approx.
46 cm (18 in.) (retracted):
approx. 19 cm (7.5 in.)
Weight: approx. 100 g
(3.5 oz.)
Max. load: 450 g (16 oz.)
Scope of supply: incl. pocket
clip, hiking clip, wrist strap,
tripod legs and carrying bag.
Code no. 6046
Quik Pod DSLR
• Made of high quality polycarbonate and aluminium • Extends up to
135 cm (53 in.) • For digital SLRs,
camcorder and lights • Retracted
size 45 cm (17.7 in.) • Weight 250 g
(8.8 oz.) • Quik release platform
• 1/4“ tripod thread • Max. load: 2 kg / 4.4 lbs.
(handheld tripod), 3.5 kg /7.7 lbs. (monopod).
Q
uik Pod DSLR is a handheld tripod
and a monopod. It extends
your reach even more
and takes a higher
load.
6044
6043
NEW
6036
6045
12
Multi-Level Table Top Tripod
Height continuously adjustable, three-section telescopic
feet, folds-down to compact
size. Ball head with locking
screw (6043) or with pan and
tilt head (6044).
Small Table Top Tripod
Extendable telescopic feet,
folds down flat. Ball and sokket head with locking screw.
Silver (6036) or titanium
(6037) coloured.
Scope of supply: Monopod foot, belly pad, hiking clip, wrist
strap and carrying bag. Code no. 6047
Small – But Going
Strong
T
able top tripods are extremely
compact, but provide a firm
standing on every plane area.
DSLR Table Top Tripod
With three-section telescopic
legs and extendable center
column. 3-way pan head
with tiltable camera platform.
Height: 18-30 cm (7.1-11.8
in.), folded length: 22.5 cm
(8.9 in.).
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:34 Seite 13
Pro Ball-and-Socket Head
With adjustable friction brake and panorama base.
Weight 650 g (1.4 lbs.), height 123 mm (4.8 in.), base
diameter 56 mm (2.2 in.), max. load 8 kg (17.6 lbs.).
Ball-and-Socket Head
Rotating panorama base. Weight
300 g (10.6 oz.), height 98 mm
(3.9 in.), base diameter 45 mm
(1.8 in.), max. load 4 kg (8.8 lbs.).
6011
Fits All!
Ball-and Socket Head
Weight 110 g (3.9 oz.),
height 67 mm (2.6 in.), base
diameter 30 mm (1.2 in.),
max. load 2 kg (4.4 lbs.).
6017
Ball-and Socket Head
Weight 45 g (1.6 oz.),
height 50 mm (2 in.),
base diameter 24 mm
(1 in.), max. load
1 kg (2.2 lbs.).
6018
NEW
6013
Camera Mounting
Platform
For precise camera adjustment for closeup, macro and copying. 9.5 cm (3.7 in.)
forward movement and 9.5 cm (3.7 in.)
lateral shift. Precision drives with finefocussing and locking screws.
6022
6021
5534
Quick-Release Connector
For quick mounting of
camera on tripod.
Quick Release
Connector Plate
Fits 6021.
Flash Adapter
1000
Flash Bracket
Light metal bracket with
resilient contact surface.
Length: 16.5 cm (6.5 in.)
1501
Remote Flash Trigger
Electronic flash trigger
for wireless firing of a
second flash unit with
high firing voltage.
1107
1200
Angle Bracket
Collapsible. Widened
three-point rest.
1300
Bounce Flash Shoe
For indirect flash illumination. Steplessly adjustable.
Height: 45 mm (1.8 in.).
1301
Flash Shoe Adapter
For cameras with hot flash
shoe and flash equipment
without hot flash shoe.
With synchro flash socket.
Flash Shoe Adapter
For cameras without hot
flash contact and flash
equipment with hot flash
contact. With synchro cable.
1303
Adapter cable for connecting flash guns to receivers
of RC remote releases, e.g. Pocket Wizard, Skyport
etc. Set consisting of hot shoe adapter with tripod
thread and removable synch cord with 3.5 mm jack
plug und synch cord
with 2.5 mm jack plug.
Length of cables:
Flash
approx. 30 cm
(11.8 in.) respectively.
Receiver
with 3.5 mm / 2.5
mm jack plug
1322
Triple PC Flash Outlet
For simultaneous use of
up to three flash units
with standard PC plugs.
1409
Flash Cable
With pull relief. 10 m
(33 ft.). PC plug and jack
plug ø 6.35 mm.
1450
Spiral Cord
For connecting flash equipment
and as extension cord. 2 m
(6.6 ft.), PC plug - PC socket.
1424: 3 m
1425: 5 m
1426: 10 m
Extension Cord
For connecting flash equipment. With right-angle plug
and socket (PC).
NEW
1420: 0.5 m
1423: 2 m
1215
Accessory Shoe Adapter
For cameras with Sony/
Minolta flash shoe.
Sony/Minolta c Standard/ISO
13
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:34 Seite 14
Keep It Clean
702002
K
inetronics’ SpeckGRABBER Pro SGP (702002) removes individual
particles of dust and dirt from sensitive surfaces without damaging
them. Suitable for camera sensors (respectively their glass covers), SRL
mirrors, lenses and oculars, films, slides, etc. With rubber-coated handle.
702001
SpeckGRABBER SG
With standard handle.
702004
702005
SpeckGRABBER Pro Kit SGL
With integrated mini lamp,
three tips, cleaning solution
and anti-static cloth in
robust box.
SpeckGRABBER Pro Kit SGK
With SpeckGRABBER Pro
handle, three tips, cleaning
solution and anti-static
cloth in robust box.
706518
6309
6308
6301
Lens Brush
In plastic tube. Lipstick
twist mechanism.
700001
Anti-Static Micro-Fibre Cloth
Specially conductive fibres,
700001 for dry cleaning,
706518 for wet cleaning.
6662
Display and Optics Cleaning Kit
Pump spray and a micro
fibre cleaning cloth.
6663
Cleaning Set
Cleaning pen and micro
fibre cloth.
14
6328
Micro Fibre Cleaning Cloth
Fluff-free, grease-absorbing. Hemmed edges.
6699
Cleaning Set
Lens cleaning paper, cleaning
leather and blower brush
6697
Cleaning Set
Optical-glass cleaning fluid,
cleaning paper and blower
brush.
Cleaning Solution
For optical glasses, acrylic
glass or plastic.
706901: PLC1, 29 ml,
706902: PLC2, 58 ml.
707001
Outdoor Photographer's
Optical Cleaning Kit
Cleaning solution, antistatic cloth and brush,
SpeckGRABBER SG, Swabs.
„Typhoon Blower“
Blower Bellows
Large rubber bulb for strong
blowing effect. Rugged front
air nozzle, rear air duct valve.
Easy to handle. Environmentfriendly. Cleaning brush included. 6316
NEW
6315
700030
Anti-Static-Brushes
For sensitive surfaces.
700010: width 10 mm
700020: width 20 mm
700030: width 30 mm
"Clear Gear" Compressed Air
For touch-free dust
removal.
706901
Blower Brush
Round brush with large
rubber blower bulb.
700010
„Mini“ Blower
Bellows
Compact rubber bulb. Fine
short front air nozzle, rear
air duct valve. Easy to handle.
6305
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:35 Seite 15
NEW
„digiShell“ Hard Shell Camera Bags
Compact camera bags with hard shell exterior and twoway zipper. Interior accessory pocket. With belp loop,
detachable carrying strap and snap hook.
Available in these sizes:
9.5 x 6 x 2.5 cm
(3.7 x 2.4 x 1 in.)* and
10.5 x 6.5 x 3.3 cm
(4.1 x 2.6 x 1.3 in.)*
digiShell 1
8281 black
8282 blue
8283 grey
*inside dimensions (WxHxD)
Portable
Protection
digiShell 2
8287 black
8288 blue
8289 grey
„SmartLoader“
NEW
Lid opens away from the body and
stays open in a fixed position thus
providing quick access to the
camera. Three mash pockets.
Zipped front pocket with overlapping cover and inside card
pocket. Main compartment
with divider. Padded handle.
Adjustable carrying strap and
shoulder pad. Belt loops.
8818
„EasyLoader“ Camera Bag
8826
SmartLoader M,
16 x 10 x 9 cm
(6.3 x 3.9 x 3.5 in.)*
With accessory pockets inside the outer lid and
on both sides. Two tops, which can be connected via a Velcro closure. Spacious front pocket
with organizer trays and zipper. This camera bag
allows quick access, as the top opens away from
the body and stays open in a fixed position. With
carrying handle and detachable, adjustable and
padded shoulder strap. Inside dimensions: 15.5 x
15 x 10 cm (6.1 x 5.9 x 3.9 in.)
8827
SmartLoader L,
17.5 x 13 x 10 cm
(6.9 x 5.1 x 3.9 in.)*
*inside dimensions (WxHxD)
8827
„digiSkin“ Soft Leather Pouch
6737 6738
6752 6753
6739 6740
6754 6755
6735/6745
Carrying Straps and Wrist Straps or digital
compacts with one fastening eye. Also suitable
for mobile phones, MP3 players etc.
6737-40 Wrist Strap, genuine leather
NEW
NEW
6752-55 Carrying Strap, genuine leather
6735
6745
Silver chain with clear plastic cover
Wrist Strap
Neck Chain
6736
6746
Soft elastic textile fabric
Wrist Strap
Carrying Strap
6736/6746
8255-62
6747 6748
Fits your camera like a second skin: Small belt pouches made
of high-quality soft leather. With velvety lining, inside pocket
for memory card and belt loop. With magnetic or Velcro closure. Available in seven different sizes.
6742
6769 6770
6776 6777
6494
Memory Card Box
Flat metal box for three SD/
Multimedia / xD / Memory
Stick cards. Dimensions:
approx. 9.5 x 6 x 0.5 cm
(3.7 x 2.4 x 0.2 in.)
6499
Memory Card Bag
With interior compartments for
memory cards and batteries.
With belt loop and snap hock.
Dimensions: approx. 8 x 10 x 2 cm
(3.1 x 4 x 0.8 in.)
6780
6791
6747/48 Reflective Carrying Strap, with quick
release lock
6742
Neoprene Camera Strap. High carrying
comfort, quick release lock for camera
Carrying Straps for digital cameras with two
fastening eyes. Length adjustable.
NEW
6769/70 High quality textile fabric,
with reverse non-slip coating,
width 30 mm (1.2 in.)
6776/77 High quality textile fabric,
NEW
with reverse non-slip coating,
width 38 mm (1.5 in.)
6780
Neoprene. End sections detachable
and reconnectable to serve as a wrist
strap
6791
Professional carrying strap. Hardwearing, with non slip shoulder pad
15
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:35 Seite 16
Compact Light
V
ideo needs light – this is always right. Compact-sized and
light-weight accessory lights, mobile and batterypowered, are providing adequate illumination in a close-up
range when lighting conditions are bad. Kaiser’s digiNova
lights, employing energy-saving long-life LED technology,
work with almost every camcorder – and are also useful for
digicams when shooting video clips.
3285
„digiNova2“ LED Video Light
Flexible video light with tiltable lamp head with 19 white-light LEDs.
Illumination (3 m / 10 ft.): approx. 15 lux, colour temperature: approx.
6.000 Kelvin, LED service life: approx. 50.000 h. Rod-shaped lamp
housing with two torsion joints allow for flexible mounting possibilities. The light will be attached either on the accessory shoe or by
means of a mounting bracket to the tripod thread. Powered by two
regular AA batteries or NiMH rechargeables. Operating time: 3 hours
max. Length (stretched): approx. 14 cm (5.5 in.). Weight: approx. 55 g
(1.9 oz.). Supplied without batteries.
Camlight Nova
Compact camcorder light with 20 watt
halogen lamp. Specially designed reflector
for even illumination. 3200 K colour temperature. Slide-in foot for upright or horizontal mounting, with blocking screw and
1/4“ tripod thread. Powered by regular batteries or NiMH rechargeables (5 x AA, not
included). Operating time up to 40 minutes. Battery compartment inside light housing. On/Off switch. Incl. 1108 Universal
Accessory Bracket.
Dimensions: (WxHxD): 55 x 98 x 72 mm
(2.2 x 3.9 x 2.8 in.)
Weight: 110 g (without batteries)
„digiNova“ LED Video Light
Super compact camcorder light with white high-performance LED combined with facetted reflector and
cylinder diffusor for even light distribution. Light intensity comparable to 8 watt halogen light. Powered
by four regular AAA-batteries or rechargeable NiMH
batteries. Accessory shoe with blocking screw and
1/4“ tripod thread.
Colour temperature: approx. 5.500 Kelvin.
Operating time with set of batteries/charge: up to
3 hours. LED service life: up to 100,000 hrs.
Dimensions (WxHxD):
47 x 80 x 57 mm (1.9 x 3.1 x 2.2 in.).
Weight (w/o batteries): 60 g (2.1 oz.).
3288
Universal
Accessory
Bracket
For camcorders and digital SLRs/CVCs
and compacts. Allows for right side or left
side mounting of accessories such as
lights or microphones. The bracket can be
aligned to the camera in different ways.
16
Supplied without batteries.
1108
Angle piece
with accessory
shoe
Plug-in bracket with
detachable anti-twist
protection and tripod
adapter screw
3282
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:14 Seite 17
NEW
More Light
Kaiser StarCluster
This compact soft light works perfect for photo and video and is also
suitable for video shots with digital SLRs and CSCs. It features 96 continuously dimmable white LEDs on a panel of 8.5 x 6 cm (3.3 x 2.4 in.)
and provides approx. 600 lux of illumination at one meter (3 feet). The
colour temperature of 5600 Kelvin relates to daylight. It is powered by
five AA batteries fitted in the rear battery compartment or by a Canon
LP-E6 battery, that can be placed in an adapter on the battery cover. The
LP-E6 is the standard battery for Canon’s 5D Mk II and 7D. There is also
a connector for a mains adaptor (optional). The light comes with an diffusion screen and
an artificial light filter (3200 Kelvin) which attach to the front of the light by magnetic
attachments. The package also contains a swivel joint for mounting to a standard hot shoe.
Several lights can be
combined side by
side or on top of each
other using a clever
catching system.
3270
Specifications:
Operating time with fully loaded
batteries: up to 2.5 hours
LED service life: 30.000 hours
Colour temperature: 5600 Kelvin
Operating voltage: 5.8 – 16.8 V
Dimensions: 127 x 77 x 45 mm (5 x 3 x 1.8 in.)
Weight: 195 g / 6.9 oz. (without batteries)
Tripod thread: A 1/4
Accessories: 3271 mains adapter
providing shadowless illumination for macro work and close-up
shots. Colour temperature is at 6000 Kelvin. Mounting on the
lens is easy as the unit slides and locks on the suitable adapter
ring. Six adapter rings from 49 to 67 mm are included. The light
is powered by two AA rechargeable batteries (not included) housed in a separate battery compartment or by a mains adapter
(included). The 24 LEDs on the left or on the right can be switched on separately.
NEW
R 48 Ring Light
Specifications:
Minimum working distance: 3 cm (1.2 in.)
Operating time with 2 NiMH rechargeables: approx. 2.5 hours
Colour temperature: 6000 K +/- 500 K
Dimensions: Ring light: 13 x 11 x 3 cm (5.1 x 4.3 x 1.2 in.)
Battery housing: 9 x 5 x 5 cm (3.5 x 2 x 2 in.)
Weight:165 g / 5.8 oz. (without batteries)
NEW
3248
KR 90 Ring Light
Professional ring light with 30 three-chip high performance LEDs. The
light intensity corresponds to that of a 30 watt fluorescent light. extremely wide angle of radiation on 110°. A rechargeable lithium-ion battery
and the complete circuitry are integrated in the main body made of
highly durable duralumin. The light can be dimmed down to 50 %. The
basic connection thread is 77 mm, several adapter rings from 55 to 72 mm
are included. An additional adapter plate (optional) allows for mounting
the light on a tripod. No light loss due to battery consumption. A quick
charger and a 12 volt car charger cable are included.
Specifications:
Min. working distance: 3 cm (1.2 in.)
Operating time (continuous lighting and fully charged battery): 3 hours
Battery capacity: 1500 mAh
Colour temperature: 5500 K +/- 500 K
Dimensions: ø 142 x 34 mm (ø 5.6 x 1.3 in.)
Weight: 300 g /10.6 oz.
3250
17
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:15 Seite 18
Enough Light
T
he lights of the „studiolight“ line are absolutely
suitable for the small home studio. They are compact, sturdy and can be combined with various light
modelling accessories. They are easy to use, and the
lighting situation is the same for
set-up and shooting.
3157
„studiolight H“ Lighting Unit
1000 watt studio light with dimmer and built-in blower cooling. Front part
with bayonet attachment for accessories. Swivel joint and umbrella mount.
Supplied with 1000 watt halogen lamp, safety glass bulb dome, lamp protector and 180 mm (7 in.) metal reflector. Code no. 3152
3154
„studiolight H Kit“ Lighting Kit
NEW
Comprises 2 „studiolight H“ lighting units (3152), 2 heat-resistant soft
boxes 60 x 60 cm (23.5 x 23.5 in.) and 2 air cushioned light stands, 70230 cm (27.5 - 90.5 in.). In carrying bag 94 x 30 x 27 cm (37 x 11.8 x
10.6 in.). Code no. 3155
„studiolight H Trio“ Lighting Kit
Comprises 3 „studiolight H“ lighting units (3152), 2 heat-resistant
soft boxes 60 x 60 cm (23.5 x 23.5 in.) and 3 air cushioned light
stands (setting height 70-230 cm / 27.5-90.5 in.). Set comes in a
rugged trolley with plastic wheels and bumpers, telescopic handle,
two carrying handles and adjustable carrying strap with shoulder
pod for easy carrying and safe storage. Customisable interior with
removable dividers. Outside dimensions: 88 x 46 x 35 cm (34.6 x
18.1 x 13.8 in.). Code no. 3157
„studiolight C“ Lighting Unit
With screw-in fixture E 27 for photofloods up to 500 watts. Built-in blower cooling. Front part with bajonet attachment for accessories, swivel
joint and umbrella mount. Includes 150 W lamp, lamp protector, and
180 mm (7 in.) metal reflector. Code no. 3150
„studiolight C Kit“ Lighting Kit
Comprises 2 „studiolight C“ lighting units (3150), 1 reflector umbrella,
silver, 100 cm (39.5 in.), 1 transmitted light umbrella, 100 cm (39.5 in.),
2 air cushioned light stands, 70 - 230 cm (27.5 - 90.5 in.). In carrying bag
94 x 30 x 27 cm (37 x 11.8 x 10.6 in.). Code no. 3154
NEW
Additional accessories for „studiolight H”, „studiolight C” and „studiolight 1010”
3160
3177-78
Soft Boxes
Heat-resistant, with ventilation flaps. 60 x 60 cm / 23.5 x
23.5 in. (3177) and 100 x 100
cm / 39.5 x 39.5 in. (3178).
18
3159
Reflectors
3159: narrow beam, 3160:
wide beam, with deflector.
3170
Background Reflector
Rotatable, position lockable.
„studiolight C Trio“ Lighting Kit
Comprises 3 „studiolight C“ lighting units
(3150), 1 reflector umbrella, silver (100 cm /
39.5 in. diameter), 1 studio umbrella, white
(100 cm diameter) and 3 air cushioned
light stands (setting height 70-230 cm / 27.5
- 90.5 in.). Set comes in a rugged trolley
with plastic wheels and bumpers, telescopic handle, two carrying handles and adjustable carrying strap with shoulder pod
for easy carrying and safe storage. Customisable interior with removable dividers.
Outside dimensions: 88 x 46 x 35 cm (34.6
x 18.1 x 13.8 in.). Code no. 3156
NEW
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:15 Seite 19
„studiolight 1010“ Halogen
Studio Lighting Unit
With 1000 Watt halogen lamp and protective lamp
cover made of safety glass. Brightness can be adjusted via step-up/step-down buttons, two-digit display. Light can be switched from set brightness to
full brightness and back. Low-noise blower cooling
for unlimited operation in every position. Bayonet
attachment with quick locking device for accessories (reflectors, soft boxes), swivel joint with lokking lever, umbrella mount. Mounts on suitable tripods/stands with 16 mm standard spigot. Includes
halogen lamp, exchangeable reflector (180 mm /
7 in. diameter) and protective lamp cover. Code
no. 3164
3164
NEW
“studiolight 1010 Kit” Lighting Kit
3165
300 W Portable
Lighting Kit
1000 W Portable
Lighting Kit
Complete light-stand-umbrella
combination. Comprises "videolight 8 S" 300 W safety lighting
unit (93307), light stand (5031),
joint with umbrella mount (5041),
and white studio umbrella (3080).
Complete light-stand-umbrella
combination. Comprises "videolight 6" 1000 W safety lighting
unit (93304), light stand (5031),
joint with umbrella mount (5041)
and white studio umbrella (3080).
In carrying bag with handle and
adjustable shoulder strap.
In carrying bag with handle and
adjustable shoulder strap.
3047
Comprises 2 "studiolight 1010"
halogen lighting units (3164), 2
heat resistant soft boxes 60 x
90 cm (23.6 x 35.4 in.) and
2 air cushioned light stands
(setting height 65-225 cm /
25.5-88.5 in.) in a sturdy carrying case. Outside dimensions:
74 x 28 x 44 cm (29.1 x 11 x
17.3 in.). Code no. 3165
3049
19
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:37 Seite 20
Desktop Studios
5911
D
esktop studios are
set up on your desk, on your
dining or living room table or wherever you like to
take your pictures. They are most suitable for small objects
photography resulting in pictures you may need for your website, for
internet auctions, for online shops or for documentation of valuables or
collectables.
Studio-out-of-the-Box
Compact foldable studio for digital photography. Comprises table, background support, background material and trapeze stand for cameras up to
500 g (1.1 lbs.). On the trapeze stand the camera can be positioned in many
different positions and in different height and distance from the object. The
camera platform is pivotable and relocatable and can be locked for vertical
shooting position. Table can be extended up to 30 cm (11.8 in.), background
can be positioned in different heights. Background roll included, approx. 40
cm (15.7 in.) wide and 130 cm (4.25 ft.) long. To support wider backgrounds
a clip-on rail is included. Dimensions (folded): 59 x 6 x 33 cm (23.2 x 2.4 x
13 in.). Supplied with carrying box: 60,5 x 10 x 48,5 (23.8 x 3.9 x 19.1 in.).
A suitable Lighting Set (2 x 8 W, 4000 K) is available as an accessory (5914).
5876
5875
5883
"Open Tube 1" Shooting Table
The evenly curved background ("open tube" outline)
improves the distribution of light on the subject.
"ConCave" Background
5884
This shooting table is assembled by the user. The
background made of flexible plastic material is
inserted into the assembled table and fixed by
Velcro fittings. Dimensions 77 x 60 x 85 cm (30.3 x 23.6 x 33.5 in.). Side
frames of the table provide attachment points for one or more lighting modules in vertical or horizontal position.
Suitable lighting module, high frequency operated: 5884 (36 W, 5400 K).
20
Flexible plastic plate, can be bent in the desired
shape and then be fixed by means of two ”beads”
and choice of respective holes. Dimensions of flat
plate: approx. 60 x 30 cm (23.6 x 11.8 in.).
5877
5875: opaque plate for shooting with reflected light
5876: transparent plate, for shooting with reflected light and backlight
Optional accessory: Clamp-on lamp (5877) with interior reflector for high
light output (11 W, approx. 6000 K), tiltable and rotatable, with 55 cm (21.7
in.) swan-neck and table clamp.
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 19:18 Seite 21
5893
with 5862
5891 with
2 x 5877
“Cube-Studio” Light Tent
“Dome-Studio” Light Tent
Desktop Lighting
5861: Desktop Lighting Kit 1, comprises lamp holder 5860, reflector (27 cm /
10.6 in. diameter) with removable diffusing cover and light stand 5859
5862: Desktop Lighting Kit 2, comprises two sets 5861
5860: Lamp Holder with E 27 ceramic socket, for photofloods up
to 250 watts. With ON/OFF switch and swivel joint with
umbrella mount. Mounts on suitable tripods/stands with
16 mm standard spigot. Mains lead approx. 3,80 m (12.5
ft). 1 piece. Without lamp and reflector.
5858: Desktop Light Stand, height 21.5-38 cm (8.5-15 in.)
5859: Desktop Light Stand, height 35-68 cm (13.8-26.8 in.)
5860
Table-Top-Studio “digital”
Complete desktop studio (5928) consisting of Small Product Table 5931 and Lighting
Unit RB 260 digital 5462. Product table with white transparent concave shaped acrylic background. Required desk space approx. 50 x 50 cm (20 x 20 in.). Lighting unit
consists of two small soft lights for even and smooth illumination. Interior reflector for
high light output, fitted with two compact fluorescents 11 W, approx. 6000 Kelvin.
Holding rods with multiple orientation possibilities, screw-on clamps for attachment.
Table-Top-Studio “digital plus”
Has an extra camera clamp holder comprising a 55 cm (21.7 in.) swan-neck arm for
cameras up to 600 g (21 oz.), ball head with 30 mm (1.2 in.) base and 1/4” camera
thread plus universal desk clamp for boards up to 30 mm (1.2 in.) thick or tubes up to
55 mm (2.2 in.) diameter. Code no. 5929
Mini Magic Arm
To mount and individually align
cameras, lights and accessories.
1/4” mounting thread. Comes with
multiple mounting adapters. Maximum load in horizontal position:
1 kg (2.2 lbs.)
NEW
5892: Floor size: 75 x 75 cm (29.5 x 29.5 in.),
height: 65 cm (25.5 in.)
NEW
5891: Floor size: 62 x 62 cm (24.5 x 24.5 in.),
height: 51 cm (20 in.)
5893: 50 x 50 x 50 cm (19.5 x 19.5 x 19.5 in.)
5894: 90 x 90 x 90 cm (35.5 x 35.5 x 35.5 in.)
NEW
White translucent surfaces provide for even and soft illuminations. Umbrella-type construction makes set-up and folddown easy. Equipped with "snow flaps" for outdoor use to prevent it from flowing away in strong wind. Comes with reversible textile background (blue and grey) and protective cover
with carrying straps. Suitable lighting: Clamp-on lamp 5877.
This cubical-shaped light tent allows for even and soft illumination. Detachable front
cover with slot for camera lens. Easy to set up, folds up automatically. Highly flexible
frame, can be folded down to compact size. Includes reversible textile backdrops
white/grey and black/blue and carrying pouch with wrist strap.
Universal Clamp
Attaches on tubes and boards.
Span width max. 42 mm (1.7 in.).
Two threaded holes 1/4” and 3/8”.
Includes spigot with 1/4” and 3/8”
threaded pins.
5055: Mini Magic Arm 1, total
length approx. 18 cm (7.1 in.)
5056: Mini Magic Arm 2, total
length approx. 29 cm (11.4 in.)
5023
More accessories available:
Holding Frame
5934 and Backlight 5463
5055
21
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:37 Seite 22
For Everything that
Won’t Fit Your Scanner!
J
ust in case, something would not fit on your scanner – too big, too
bulky, too wide etc. – here is where it belongs. Combined these
stands with your camera and enjoy a perfect image capturing tool for
all “awkward” items that need to be photographed from above: the
vintage LP cover, grandfather’s precious pocket watch or
just a section out of a large-sized road map.
Suitable lights can easily be added.
RS 2 XA Camera Stand
Non-reflective matt grey baseboard with printed fine grid and
cm/inch scale. Matt-black anodised aluminium section tube
column with cm/inch scale. Hand-cranked height adjustment.
Horizontally adjustable camera arm. 1/4” mounting thread.
Baseboard (WxHxD): approx. 40 x 2.5 x 50 cm (15.7 x 1 x 19.7
in.). Column height: approx. 76 cm (30 in.). Maximum load: 1.5
kg (3.3 lbs.). Code no. 5411
RB 218 Lighting Unit
With two small light banks with interior reflector and 18 W,
5400 K daylight fluorescent lamp. Lights are tiltable and adjustable in height. Angle of vertical arms adjustable by lock joint.
Mounted with strong die-cast clamp bases. Separate control box.
Code no. 5453
RB 2 Lighting Unit
5450
With four tiltable and adjustable reflectors on mounting
arms which are in turn tiltable
and adjustable in height. Lights
can be switched on separately.
Suitable lamps: 4 x 150 W max.
Supplied without lamps.
5411 with 5453
Digital Slide
Duplicator
Suitable for digital
cameras with filter
thread. Connecting
thread 52 mm. With
detachable achromatic macro lens. Full
size copy can be
obtained using it
6506
with a lens with
focal length of 80 – 120 mm, details with higher focal
length. Includes holder for two slides and 58-52 mm
adapter ring.
6507
Film Strip Carrier
For six 35mm negatives or unmounted
slides. For use with
Slide Duplicator
6506.
„reprokid“ Camera Stand
Super-compact camera stand for small, lightweight cameras. Non-reflective, matt-black baseboard. Column with cm/inch scale. Height-adjustable
camera arm. 1/4” mounting thread. Baseboard (WxHxD): 32 x 1.9 x 38 cm
(12.6 x 0.7 x 15 in.). Column height: 59 cm (23.2 in.). Max. load: 1 kg
(2.2 lbs.). Includes lighting unit with two E 27 screw-in mounts for lamps
up to 250 Watt (supplied without lamps). Code no. 5360
22
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:37 Seite 23
Pixel-Perfect Cut?
T
his is not required. But it would be nice to have all
the things “produced” on your printer with a neat
and precise cut. This makes a trimmer a PC peripheral
– it is very useful anyway.
Cutting Ruler
Cuts paper, foils and film. Transparent pressure
ruler with attached metal guide bar for the cutting head. Three exchangeable cutting heads
with rotary blade for line cutting, zigzag cutting and perforation. Pressure ruler with cm
and inch scales, format markings and grid pattern, cutting mat with scales line-up squares.
4315
Hand-Held
Magnifier
Stylish magnifier with
LED illumination.
Ergonomically
designed handle.
Lens edge mattfinished and
rounded off.
Batteries
included.
Cutting length: approx. 31 cm (12.2 in.), cutting thickness: max. 1.5 mm (0.06 in.).
"easy cut" Safety Trimmer
Easy and safe cutting with ground circular
blade. Automatic paper clamping at cutting
position. Sturdy metal base board.
4306: easy cut 1, cutting length: 32 cm (12.6
in.), cutting thickness: 1.0 mm (0.04 in.)
2368: Lens diameter: 65 mm (2.6 in.),
magnification: 3x
4307: easy cut 2, cutting length: 45 cm (17.7
in.), cutting thickness: 0.8 mm (0.03 in.)
4306-07
2369: Lens diameter: 80 mm (3.2 in.),
magnification: 2.2x
"hobby cut" Safety Trimmer
With self-sharpening rotating circular blade in
a closed plastic housing. Automatic paper
clamping for precision cutting. Transparent
clamping bar. Metal baseboard.
Pocket
Magnifier
4308: hobby cut 1, cutting length: 32 cm (12.6
in.), cutting thickness: 0.8 mm (0.03 in.)
4309: hobby cut 2, cutting length: 46 cm (18.1
in.), cutting thickness: 0.6 mm (0.02 in.)
4308
4311: hobby cut 1, same as 4308, but with additional cutting
heads for deckle cut, perforation and zigzag cut
4312: cutting heads set, available as an accessory for 4308
4312
NEW
4309
Flat magnifier with LED
light. The LED lights
up when loupe
slides out.
Magnification: 2.4x
Lens size: 52/34
mm (2/1.3 in.)
2371
23
9079_DigitalZub_GB_0910_DigitalZub_9079_GB_0910 09.09.10 14:37 Seite 24
Worth Watching!
T
oday's digital cameras and
flashguns offer an almost endless number of features and settings. Camera manuals are covering every detail on several hundred pages.
To get the most out of your camera quickly and easily you should
try these video tutorials from Blue Crane
Digital. All you need
now is a DVD player
and about two hours
of your time. Then
you will learn how to
create the images you
want. You can closely
follow settings and
procedures,
basic
knowledge will be
explained and sample images will show
the results. All topics are arranged
in chapters, so you can move at
your own pace and return later to
individual subjects.
Available titles:
6439:
6440:
6441:
6442:
6443:
6445:
6447:
6448:
6459:
6458:
6449:
Nikon D90, Erweiterte Funktionen
Canon 50D
Canon 50D / 5D Mark II, Erweiterte Funktionen
Canon 5D Mark II
Nikon D5000
Canon 500D
Canon 7D
Canon 550D
Canon Speedlite 580 EX II / 430 EX II
NEW
Nikon Speedlight SB 900/800/600
NEW
Perfekte Videos mit Canon DSLR-Kameras
USA
HP Marketing Corp.
P.O., Box 715
Pine Brook, NJ 07058
Tel (+1) 973-8089010
Fax (+1) 973-8089004
www.hpmarketingcorp.com
info@hpmarketingcorp.com
United Kingdom
Fotospeed Distribution
Jay House Ltd
6B Park Lane Industrial Estate
Park Lane, Corsham
SN13 9LG
Tel (+44) 1249-714555
Fax (+44) 1249-714999
www.fotospeed.com
info@fotospeed.com
Canada
Nadel Enterprises Inc.
425 Attwell Drive
Rexdale, Ontario
M9W 5C4
Tel (+1) 416-7452622
Fax (+1) 416-7422616
www.nadel.ca
info@nadel.ca
New Zealand
Photo Warehouse Ltd.
175 GT North Rd.
Ponsonby-Auckland
Tel (+64) 9-3032148
Fax (+64) 9-3099721
www.photowarehouse.co.nz
enquiries@photowarehouse.co.nz
The Catalogue
More information on the comprehensive Kaiser range of products can be
found in the 252 pages of the Kaiser
general catalogue. Available from your
dealer or through the Kaiser distributor in your country.
Kaiser Fototechnik GmbH & Co. KG
Im Krötenteich 2 · 74722 Buchen · Germany
Tel.: +49(0)6281 407- 0
Fax: +49(0)6281 40755
www.kaiser-fototechnik.de
info@kaiser-fototechnik.de
Rights reserved to make technical modifications. All specifications are approximate. Printed in Germany 09079.02.0910.5000
These German language DVDs
are produced specifically for the
European market and are distributed exclusively by Kaiser Fototechnik.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising