danish design - T
HANDCRAFTED IN DENMARK
FUELTANK JUNIOR
5 Isolated Outputs - 120mA Each
• Voltage selector, 115/230V
• 5 x 9V DC isolated outputs (120mA each)
TONETRUNK ROAD CASE
TT Road Case 56:
560 x 316 mm / 22.04 x 12.44 in
TT Road Case 70:
700 x 316 mm / 27.56 x 12.44 in
TT Road Case Major:
700 x 480 mm / 27.56 x 18.90 in
CABLES & VELCRO
POWER SUPPLIES
TAPE ECHO
TONE ATTACH
Hook-and-loop fastener.
BATTERY CLIP CABLE
To connect pedal with 9V battery
operation to a power supply.
VOLTAGE DOUBLER
ADAPTER
VOLTAGE DOUBLER
Combines 2 isolated outputs
from a power supply into one DC
plug and doubles the voltage.
CURRENT DOUBLER
ADAPTER
FUELTANK CLASSIC
1500 mA Through 10 DC Plugs
• MAINS input power plug, 3-pin standard plug
• Voltage selector, 115/230V
• Eight 9-volt DC output plugs, all sharing the
same ground
• Giving a total of 500mA
• One 12V DC output with isolated ground,
giving 500mA
• One 12V AC output with isolated ground,
giving 500mA
• Slow burning fuse 250V 250mA
CURRENT DOUBLER
To connect pedals with inverted
polarity to power supply.
Leveling Bracket:
110 x 160 x 20 mm / 4.33 x 6.29 x 0.79 in
Power supply Bracket:
87 x 195 x 37 mm / 3.43 x 7.68 x 1.46 in
12V AC LINE 6 CABLE
To connect your Line 6 pedal
to a power supply.
DC MINI JACK CABLE
A Total of 1500 mA
in 5 Isolated Outputs
•
•
•
•
•
•
•
5 outputs each with 300mA ( = 1500mA)
Output 5/6 choice of either 9/12V DC or 12V AC
Choice of 9V DC, 12V DC, 12V AC or 18V DC -150mA
Noise-cancelling galvanic isolated outputs
Traditional EI Transformer
Current doubler = the possibility of as much as 600mA
Voltage selector, 115/230V
To connect pedals with mini jack
plugs to power supply.
12V DC CABLE
To connect pedals with normal DC plugs to AC output.
DC LINK EXTENSION
TONETRUNK SOFT BAG
TT Soft Bag 45:
316 x 450 mm / 12.44 x 17.72 in
TT Soft Bag 56:
316 x 560 mm / 12.44 x 22.04 in
TT Soft Bag 70:
316 x 700 mm / 12.44 x 27.56 in
TT Soft Bag Minor:
158 x 560 mm / 6.22 x 22.04 in
To extend the normal link cable.
Starts with a female plug.
DC POWER CABLE
To connect pedal to power supply.
20cm / 7.87in - 50cm / 19.7in 75cm / 29.5in and 100cm / 39.4in.
DC LINK CABLE
FUELTANK GOLIATH
To connect up to 5 pedals to
one output on a power supply.
3000 mA in 7 Isolated Outputs
•
•
•
•
•
•
•
2nd edition 2017
DANISH
DESIGN
POLARITY INVERTER
FUELTANK CHAMELEON
T-REX ENGINEERING
Combines 2 isolated outputs from
a power supply into one female
plug and doubles the current.
Combines 2 isolated outputs from
a power supply into one DC plug
and doubles the current.
BRACKETS
www.t-rex-effects.com
Combines 2 isolated outputs from
a power supply into one female
plug and doubles the voltage.
5 isolated 9/12V DC outlets (450mA each)
1 isolated 12V AC outlet (450mA)
1 isolated 18V DC outlet (250mA)
Voltage selector - 115/230V
The fuse is external for easy replacement
Pedal board mounting bracket included
Including all the cables you need
T-REX PATCH CABLE
Featuring gold-plated plugs,
oxygen-free copper cable,
extra shield to eliminate noise
and molded strain relief for the
utmost durability.
18 cm (7“) and 55 cm (22 “).
POWER CABLE SURVIVAL KIT
8 special use cables for non- standard
power requirements.
WHEN TONE MATTERS
www.t-rex-effects.com
FAT SHUGA
• Gorgeous “JRC4558” overdrive gain
• Adds juice, but leaves core
tone intact
• Virtuoso performance at any
gain level
• Mix in clean signal for extra
punch
• 3 low-end boost options
match any guitar
• The blue tone in a box!
• 2 great transparent overdrives
• One less compressed, and
open sounding
• Sounds like a quality tube
amp braking up
• Combination of creamy overdrive/boost and reverb
• Amp-like breakup and overdrive, and cool ambience
• Great for solo Boost
• Real warm vintage Reverb
QUINT MACHINE
Boost Reverb
Four-Tone Generator
• Octave up, octave down
and a 5th up with individual
volume controls
• Master mix knob
• Fast, polyphonic tracking
• Cool bass/organ/power chord
sounds
5 Boutique Pedals in 1
• FX loop insert with aux power plug for volume pedal or modulation
pedals placed after distortion/before delay
• Tuner included with display for note and up/down arrows. Mutes
output for silent tuning
• Based on T-Rex classics - Møller, Mudhoney, Replica/Reptile and
RoomMate
• Sleek looks, simple to operate, same quality sound as individual
pedals
• Can be used as standalone pedals or in preset mode via mode
switch
• Analog dry signal - never goes through AD/DA converters
• Comes with a padded bag and power supply
• Integrated switching system with 10 presets
• No patch cables or multiple power adaptors
• Stereo output
SOULMATE ACOUSTIC
All-in-One Acoustic Pedalboard
NITROS
Hypergain Distortion
BASS JUICE
Distortion Pedal
for Bass Players
• Organic distortion specially
designed for bass
• Awesome sustain with rich,
creamy overtones and big
bottom
• Engage the boost function
and you are in fuzztone
heaven
• Blend just the right amount
of distortion with your original
clear tone
COMPRESSOR
KARMA BOOST
MUDHONEY II
Boost Guitar, Bass or
Keyboard up to 16dB
Crunchy, Fuzzy Distortion
• 2 channels of vintage gain
classic dual distortion
• Amazing tonal range and ability to deliver everything from
smooth dirty edge to a harrowing wall of distorted sound
• New tone controls
• Boost function and tone control
for each channel
• Bold and aggressive clipping
circuitry
• Active 3-band EQ for extreme
shaping of the voicing
• Mid- to high gain with tightness and articulation
• Fet-bypass for low switching
noise and buffering capabilities
Tri-Tone Generator
• Reacts on the spot - No
latency!
• The tracking is seamless
Chords or single notes
• Third high octave for a sonic
wall of three octave lead lines
• Independent clean boost for
your solo
Compressor
Boost (post effects)
Stereo line/D.I. outputs
5 min. stereo looper
Ultra fast chromatic tuner
Warm delay with tap tempo
FET preamp with high/low impedance selection and phase switch
Hall reverb with shimmer effect (optional expression pedal control)
Optional master volume control from expression pedal
Modulation: Classic chorus/detune
Automatic feedback suppression
3-band parametric equalizer
NEOCOMP
• Premium compression in a
small form factor
• Based on the legendary
Blackmer® VCA
• Compression ration up to 9:1
• Adjustable on all standard
parameters
• Great for bass and vocals too
Triple Voice Analog Wah
• 100% analog signal
• True bypass
• Two playbackheads for three
modes of operation
• Tap tempo
• Kill dry switch
• Expression pedal control of
time and feedback
REPLICA
REPLICATOR MODULAR
Studio Format
Sebastian - Founder & Owner
Research & Development
• All analog echos and signal path
• Delay time controlled by a digitally
controlled motor
• Three echo modes, modulation of
the echo and tap tempo
• CV inputs for controlling time/
feedback – get super spacious, yet
ultra cool sounds
• Kill-dry switch for parallel processing (mixer)
• Housed in a compact Eurorack
module (44HP)
REPLICATOR JUNIOR
Tape Echo
• True, 100% analog tape echo
pedal
• Single playback head
• Controls for saturation, effect
level, feedback and time
• Tap tempo footswitch
• Push-in knobs avoids unwanted
movement
It was kind of by accident that the Custom Shop was started. We wanted
to make a tape echo unit. A real one. As Sebastian puts it, “I was tired of
reading pages upon pages on which digital algorithm was more accurate
and how a real tape echo should sound, so I just thought we should just
go and make one”. Such a thing works on mechanical principles as much
as electrical ones, so we had no choice but to make these ourselves here
in Denmark. Quality control and parts manufacturing precision would
suffer if we didn´t. And we´ve wanted to get our hands dirty for some time
anyway.
Today, we build tape echos right here at T-Rex HQ in Vejle, Denmark.
Starting up, ordering parts and setting up tools, the workshop, employees
and all the paperwork was a bumpy ride and we are working harder than
we anticipated on finishing up orders, due to the success and demand of
those units.
But if you´re like us, “building stuff that does something cool” is as appealing now as when we were children in our father´s workshops. That
childish fascination of stuff that can rotate, blink, make noises, etc. is
exactly why T-Rex was founded to begin with. In Denmark, we speak of
a guy named Storm P., who was famous for his drawings of “machines”
that look a bit like Leonardo Da Vinci´s stuff, only way more intricate and
WAY more silly. For us Danes, he is the modern day father of mechanical
DIY-projects, and we often quote him, when referring to our Tape Echo
as “Storm P.-ish”. It has lots of wheels, rollers, lights, springs and levers,
connected in a very intricate way, just like Storm´s machines.
The Replicator started the whole thing and more products will follow,
because this is how we first started and this is what we´re made of.
In a business that´s become synonomous with offshore manufacturing,
outsourcing and mass production, we are proud to make these home
grown products available to our customers, handmade in Denmark.
Kette - Service & Repairs
Ditte - Sales & Marketing
Jeannette - Web & Graphics
Sabina - Finance Manager
Michael - Sales & Artist Relations
Mohamad - Warehouse
and Production
About T-Rex
Tap Delay
• Tap tempo control feature
• Warm analogue tone
• Tubey warmth that brings out
the best in your natural tone
REPLAY BOX
3 Seconds of Delay
•
•
•
•
•
Analog dry signal
Tap tempo footswitch
Pristine and clear sound
Up to 3 seconds of delay
Runs on standard 9V DC
power
• True stereo operation (L/R
inputs and outputs)
• Subdivision switch - allows
choice of quarter, triplets or
the sought-after dotted eighth
delay
TUNEMASTER
Chromatic Tuner
with Line Drive
• Ultra-simple operation
• Big note display with red up/
down indicators
• Green leds surrounding the
display for ”in tune” indication
• Selectable true bypass or buffered bypass
• Adjustable output in buffered
bypass for long signal chains
Lars - Founder & Owner
Head of Sales
Iben - Production assistant
SHAFTER WAH
• 3 completely different “wah”
characters
• Custom made coils and
inductors enhance both growl
and wah
• Highly tuneable via boost and
slope knobs
• Hot spot switch for classic or
“heal to toe” sweep
• Potentiometer-free operation prevents noise and
mechanical wear
Tape Echo
Designed, tested and
developed in Denmark
Full Featured Compressor
• Advanced non-linear boost
circuit
• Based on highly celebrated
T-Rex buffer
• Subtle edge at higher levels
• Elegant one-knob operation
•
•
•
•
•
•
•
•
•
•
•
•
TUNER
• Wide range of gain levels
• Wider range of distortion
sounds
• Selected components for
better tone
• Huge bottom end available at
the turn of a knob
• Highly tweakable with a
simple layout and small form
factor
• More flexibility, due to the
added low-boost and fat-boost
knobs
• Classic bluesy overdrive
• Provides a wealth of dynamic
tones
• Dial in the perfect balance
between overdrive and clean
signal
• Independent clean boost for
your solo
• Stunning bluesy sound with
just a little dirt around the
edges
3 Reverb Types
• 3 reverb types (spring, room,
hall)
• Tone control for adjusting the
high frequencies of the reverb
• Analog dry signal keeps the
tone intact
• High quality reverb algorithms
• Small, ultra simple operation
BOOST
VULTURE
Highly Tweakable Distortion
OCTAVIUS
CREAMER
DELAY
MØLLER 2
Classic Overdrive
with Clean Boost
TAPE ECHO
ALBERTA II
EFFECT BOARD
OCTAVER
REVERB
Dual Overdrive
DIVA DRIVE
WAH
DISTORTION/OVERDRIVE
Overdrive with Blend
SOULMATE
REPLICATOR
REPLICATOR
REPTILE 2
Analog Tape Echo Simulator
•
•
•
•
Analog sounding tape echo
Tap tempo control feature
Analog dry signal
Speed/width controls for the
modulation of the delay
Founded by two childhood friends following the immediate success of what was really a school project, T-Rex Engineering has
been making pedals, boards and power supplies for more than 20
years, based in Vejle, Denmark.
The company has grown through the years, but we are still very
proud to be just as easy going, just as friendly and just as focused
on making high quality and useful products as we were when we
first started out.
We feel that players should get more than just the obvious: Good
tone. We want to invite them into our own world, make them feel
like family and talk to them. This is the only way we can keep exploring new ideas and designs, and the positive feedback continues to prove to us that we are on the right track.
Our users and partners are not only that – they´re friends of ours.
Our products should fulfill a certain need, stay simple and yet be
versatile in use, look and sound good and be sturdy.
The heritage of Danish designed products is not to be taken
lightly, because it has to do with more than just colours, shapes
or finishes and we know this. That´s why we constantly seek to
improve and innovate wherever possible. We love this stuff and
we want you to feel the same.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement