Commercial Installation Solutions_L
A Fresh Perspective...
1
Introduction
Introduction
2
The Art of Installed Sound
At Yamaha, our product development process always begins by
carefully examining, then addressing, the needs and requirements of our
customers. Centred around “6 Key Values” and a fresh approach to audio
installation, we have developed a lineup of products that responds to the
growing demands of the installed sound market—and benefits everyone
involved in the installation process. As a result of the faster and simplified
workflow, the entire installation team can reduce the amount of resources
required to complete installation, while owners will benefit from the
ease of system operation, superior product reliability, cost efficiency, and
most of all— the outstanding sound quality that will make the overall
experience for customers in their commercial space more enjoyable.
3
6 Key Values
6 Key Values
6 Key Values
4
Reliability
Performance you can count on
With commercial installed sound, nothing is more important than the assurance that every
piece of equipment in your sound solution will operate at peak performance long after the
installation process has finished. Since most commercial environments require un-manned
operation without the expertise of an audio engineering professional, you need products that
you can depend on for years to come. Over the past several decades Yamaha has developed
a reputation for providing customers with dependable, high-grade products that guarantee a
lifetime of reliable operation.
All Yamaha products undergo rigorous testing
at every stage of their development in order
to meet the highest standards of reliability and
endurance. Only the best quality component
parts are used in our products— each of them
subject to detailed analysis before and after
extensive testing that simulates the harshest
conditions our products might be subjected
to, in order to ensure they can operate in
even the most demanding environments. This
5
6 Key Values
meticulous testing process is backed up by protection features that keep your equipment safe,
offering improved longevity even when working in less-than-ideal conditions. Combined with
road-tested innovation, this attention to detail has established Yamaha as the premier force
in live sound reinforcement and large installation markets, and now we've brought this same
dedication to performance excellence to our new lineup of commercial installation products.
Our commitment to our customers extends well beyond the reliability of our products. Thanks
to a comprehensive worldwide distribution network, we can offer customers professional
service and support to ensure that everyone
who uses our products is getting the best out
of their Yamaha purchases. No matter where
you are, you can be assured of assistance with
any product-related inquiries, so you'll never be
left hanging.
Simplicity
Time is on your side
Installing a commercial sound solution can be a sizeable undertaking, requiring a great deal of
energy, planning and perhaps most significantly, time. Yamaha now offers a comprehensive new
range of installed sound products that possess superior sound and performance characteristics, yet
reduce the amount of resources that would normally go into designing, installing and configuring
such a system. With standardized connections, flexible functionality, and an innovative approach
to workflow, these products function together seamlessly, allowing you to construct a sound that
remains consistent throughout your installation space.
Yamaha's new proprietary YDIF digital transmission format provides 16 channels of digital audio
using standard Ethernet cable, reducing the need for excessive cabling that often requires a
lengthy setup process as well as more physical space to accommodate it. Numerous innovative
new features also contribute significantly to simplifying the design process as well as reducing
the amount of equipment normally required to meet the demands of various environments.
Even series speakers have been purpose built for safe, easy installation, with carrying bands and
mounting brackets arranged in a standardized configuration.
With the MTX Editor application, sound system installers have a software tool that allows them to
design and configure a sound solution on a PC, creating a detailed design that they can then utilize
in the real world. MTX Editor mirrors the workflow of an installation process— from selecting which
products are best suited to your commercial space, right
through to installation— allowing detailed configurations
to be assessed virtually, and then processors configured
to match, prior to the final installation work. This process
greatly accelerates and simplifies the overall workflow,
providing everyone involved in the system's installation
with a flexible roadmap to work from.
From the products, to the software, to
the workflow itself, everything comes
together to form a simple, intuitive system
of operation that benefits each stage of
the installation process and everyone
involved— from system designers and
installers, to end-users. This new approach
is guaranteed to reduce cost, energy, space,
man-power and best of all, the amount of
time required to complete an installation.
6 Key Values
6
Flexibility
Expandability
We've got you covered
Broaden your horizons
Designing a complete sound solution from the ground up can be a daunting task, and selecting
the proper equipment for your system is the crucial first step. Our new lineup of commercial
installation products offers numerous advantages by providing flexible features that reduce the
number of components required to configure your system and ensure that it meets the specific
demands of your commercial environment.
Based on Yamaha's extensive experience in sound reinforcement and larger installations this
new lineup features several expandability options, adding more input/output capability and
functionality to accommodate a wider range of applications. For larger installations, products
featuring dedicated Dante ports provide the latest in audio
network technology and seamless integration with other Dante
enabled equipment. Yamaha's popular MY expansion cards
make it easy to add functionality and input/output capability
in a wide variety of audio and network formats, to products
that are equipped with compatible card slots. This series also
features dedicated expanders that can add flexibility to your
systems design, providing additional input/output capability
via Yamaha's YDIF proprietary digital audio transmission format
using standard Ethernet cable.
Easily adaptable to countless applications, all series speakers and amplifiers are capable of running
in high or low impedance modes. Series power amplifiers can even achieve 70V or 100V operation
on all channels without sacrificing
any outputs. Additionally, the newly
developed Double Power Mode allows
a single amplifier to drive speakers of
varying output capabilities. Offering
additional flexibility for end users,
the newly developed Wireless DCP
software app gives iPhone and iPod
touch users remote control of system
presets and levels.
7
6 Key Values
Yamaha Quality
Efficiency
For discriminating tastes
Think Green
Yamaha has a proven track record for providing both industry leading AV products for the
consumer market, and high quality, professional equipment for live sound, broadcast and
recording applications. Now we are bringing this same commitment to our customers in the
installed sound market, offering the proven assurance of Yamaha sound quality in a whole new
range of installation applications.
In an era when the world faces issues such as climate change, rising costs, and diminishing
resources, the slightest reduction in power consumption represents a significant benefit, both in
cost and in environmental impact. For this reason, our commercial sound products offer a range of
innovative features aimed specifically at lowering power consumption.
With each new application comes a different set of sonic demands and your sound system has to
be able to adapt accordingly. For example, in a retail store a prominent bass end could be beneficial
by making customers enthusiastic, while in a cafe or restaurant, a more subtle approach might serve
to complement the overall atmosphere. Whether music or spoken words, you can be sure of a clear,
natural reproduction of the original sound source, with very low noise and minimal distortion.
This insistence on quality and clarity is also evident in the appearance of these products, which
feature simple yet sophisticated designs that enable them to blend seamlessly into almost any
installation environment. Even the signature hexagon motif that is consistent throughout the
lineup serves a dual role, acting as a design element while enhancing product performance.
Functional yet aesthetically pleasing, our commercial sound installation lineup is the perfect
choice to bring Yamaha quality into your installation.
Series power amplifiers feature Class-D topology combined with a new patent pending 2-step
output circuit that raises the efficiency of the amplifier to over 90% at rated output power. The
amplifiers also utilize a Power Factor Correction equipped switching power supply that benefits the
installation venue itself, making circuit breakers less prone to shutting down, as well as negating
the need for thicker, heavier cables. Our commercial sound systems also feature high efficiency
speakers that offer stunning sound while requiring less
power than conventional speakers, allowing the use of
smaller capacity amplifiers than was previously possible.
Perhaps most importantly, is the simplicity of Yamaha's
streamlined new approach to installed sound— taking this
power-saving philosophy a step further by making system
design and setup faster and easier, allowing your team to
work less but achieve more.
6 Key Values
8
DCP Series
US standardized size models
EU standardized size models
EXi8 / EXo8
XMV Series
MTX Series
9
Lineup
VXC Series
VXS Series
Lineup
10
Simple Digital System
This system features a digital matrix processor. Touch panel control systems make it easy for just about anyone to operate major sound system functions from an easily comprehensible interface. The MTX3
scene memory can store up to 50 complete setups that can be instantly recalled whenever needed, making it easy to switch setups for a variety of applications. The XMV4280 power amplifier can be set
up to drive low and high impedance loads in 2-channel groups, so a single unit can simultaneously power low and high impedance speaker systems. Since the MTX3 features processing data for Yamaha
speaker systems built in, it’s easy to achieve optimum sound and matching while protecting the speakers against overload damage.
Applications:
G
Screen
G
Mic
PC
Wireless Mic
Receiver
Podium
Wireless Mic
AV Switcher
Projector
B
Lecture Rooms
Small Meeting Rooms
Houses of Worship
Restaurants
A
C
H
H
E
Podium
Mic
D
etc…
F
Video
Monitor
Products List
Analog Cable
Speaker Cable (High Impedance)
Speaker Cable (Low Impedance)
Video Cable
CAT5e Cable (YDIF)
CAT5e Cable (DCP)
USB Cable
11
System Example
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
CD Player
iPod or Other MP3/WMA Player
Blu-ray Disc Player
Matrix Processor
Control Panel
Power Amplifier
Surface Mount Speaker
Ceiling Speaker
CD-S300RK
BD-S667
MTX3
DCP1V4S
XMV4280
VXS8
VXC6W
Zoning System
This system features a digital matrix processor that also provides zoning capability. Overall system routing and processing is handled by a single MTX3 unit located in the office. Different BGM and announcements
can be broadcast to five different zones: the entrance, the two zones in the main area (blue and green areas), the fitting room (green area), and office. By using a subwoofer to reinforce the low frequencies listeners
will feel the music more for a greater sense of involvement and impact. A DCP4V4S control panel at the checkout counter allows easy volume adjustment and preset selection. The MTX3 features a built-in priority
ducker function that automatically reduces the volume of background music when an announcement is being made. A built-in MP3/WAV file player means that the MTX3 can play background music, scheduled
announcements, or chimes, etc., without the need for external playback equipment.
Fitting Room
I
F
I
Wireless Mic
Receiver
J
B
F
G
Applications:
Shelf
Table
A
Office, Amp Room
F
Shelf
F
I
I
B
A
Shelf
Table
Table
Table
I
Table
Check-out Counter
Wireless Mic
Shelf
Restaurants
Hotel Lobbies
Cable Broadcast
Receiver
Cable Broadcast
Receiver
K
C
Shelf
Shelf
F
Bars
I
G
F
Retail Stores
F
etc…
D
Stairs
Table
Table
Table
G
E
H
Table
Table
Table
I
Products List
Table
G
Table
F
Table
F
Entrance
Analog Cable
F
Speaker Cable (High Impedance)
H
Entrance
Window Display
CAT5e Cable (YDIF)
CAT5e Cable (DCP)
USB Cable
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
CD Player
iPod or Other MP3/WMA Player
Matrix Processor
Power Amplifier
Power Amplifier
Surface Mount Speaker
Subwoofer
Surface Mount Speaker
Ceiling Speaker
Ceiling Speaker
Control Panel
CD-C600RK
MTX3
XMV4140
XMV4280
VXS5W
VXS10STW
VS6W
VXC6W
VXC4W
DCP4V4S
System Example
12
Room Combining System
A digital matrix processor is used to serve a room that will be partitioned for many applications. Overall system routing and processing is handled by a single MTX5-D unit in the amp room. Wall-mounted
DCP4V4S control panels are provided in both the Room A and Room B areas for convenient volume control and preset selection. Room A additionally features an 01V96i digital mixing console that can
handle live music. Built-in delays allow the MTX5-D to precisely compensate for distance delay between speakers for clear, well-defined sound. Proper delay compensation also makes it possible to achieve
optimum sound quality and imaging without having to use excessive volume levels.
Room A
I
Mic
Wireless Mic
I
Control
Desk
Applications:
Wireless Mic
Receiver
Mic B
Amp Room
Network
Switch
A
K
B
F
A
Banquet Halls
K
G
Multipurpose Rooms
C
H
K
L
H
K
Meeting Rooms
etc…
D
Movable Partition
Room B
Wireless Mic
Receiver
K
A
Mic
B
Analog Cable
L
Speaker Cable (High Impedance)
K
B
A
J
Mic
13
System Example
Wireless Mic
Control
Desk
Speaker Cable (Low Impedance)
CAT5e Cable
CAT5e Cable (YDIF)
J
E
CAT5e Cable (DCP)
USB Cable
Products List
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
(J)
(K)
(L)
CD Player
iPod or Other MP3/WMA Player
Digital Mixing Console
Dante Interface Card
Matrix Processor
Matrix Processor
Power Amplifier
Power Amplifier
Speaker
Speaker
Ceiling Speaker
Control Panel
CD-S300RK
01V96i
DANTE-MY16-AUD
MTX3
MTX5-D
XP5000
XMV4280
IF2112W
IF2108W
VXC8W
DCP4V4S
Dante Networking System
A digital matrix processor is used to mediate Dante networking between room A and rooms B and C, allowing audio to be shared in a variety of ways. In addition to handling audio input and output for the
rooms in which they are located, the MTX5-D units provide Dante network communication with the other rooms. An event taking place in Room A can be auditioned in Rooms B and C, and bidirectional
communication means that questions and answers can be passed back and forth as well.
PC
Podium
Mic
Wireless Mic
Receiver
AV Switcher
Network
Switch
B
A
D
C
Analog Cable
Speaker Cable (High Impedance)
Speaker Cable (Low Impedance)
Video Cable
CAT5e Cable
CAT5e Cable (YDIF)
CAT5e Cable (DCP)
USB Cable
RS-232C
PC
x 2 set (Room B, C)
Podium
Mic
F
Wireless Mic
Receiver
D
B
A
C
E
G
Applications:
E
Conference Centers
Screen
G
Mic Podium
Lecture Hall & Classroom Complex
I
Wireless Mic
H
Video Monitor
Mic Podium
H
Wireless Mic
Room B
H
Video Monitor
Projector
Corporate Facilities
etc…
I
H
Products List
Mic Podium
Room A
Wireless Mic
Room C
H
Video Monitor
H
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
CD Player
iPod or Other MP3/WMA Player
Blu-ray Disc Player
Matrix Processor
Power Amplifier
Control Panel
Active Loudspeaker
Ceiling Speaker
Surface Mount Speaker
CD-S300RK
BD-S667
MTX5-D
XMV4280
DCP1V4S
DXR10
VXC6W
VXS8
System Example
14
Matrix Processor
MTX Series
MTX3
MTX5-D
The Heart of Your Sound Solution
Designed primarily for multi-zone commercial installations, MTX Series matrix processors are equipped with flexible processing functions that are essential to a wide variety of applications such
as retail stores, restaurant/bars or banquet rooms. Responsible for the primary processing functions at the heart of your system's design, MTX processors allow you to configure, program, and
manage your entire sound solution via the intuitive interface of the accompanying MTX Editor software application. The series is comprised of two models with varying DSP capacities and
expansion capabilities, allowing MTX processors to meet the demands of a truly impressive range of commercial environments.
The ideal Digital Signal Processor for small to mid-size
commercial applications
Versatile Input/Output configuration and SD Memory
Card Slot for playback
MTX Series processors come equipped with a variety of programmable
features designed to maximize the performance of sound systems
in commercial installations. With a focus on reliability and worry-free
operation, functions such as Feedback Suppressor can automatically locate
and eliminate acoustic feedback, while Auto Gain Control maintains a
constant output level when input signals vary. For ancillary applications or
environments that require public speaking, MTX processors feature a Priority
Ducker function which automatically attenuates the output level a specified
amount when the input signal from a separate sound source exceeds its
threshold— as well as an Ambient Noise Compensator which adjusts system
gain to compensate for fluctuating background noise levels. Combined
with an onboard speaker processor for optimized speaker performance
and sound quality, the MTX Series makes it easy to design and configure a
complete audio system from input to output.
The MTX Series feature an input/output configuration that is ideal for a wide range
of applications: 8 mono inputs (mic/line), 2 stereo inputs (line) and 16 digital inputs
via YDIF. The output side consists of 8 line-level mono outputs and 16 digital
outputs via YDIF. MTX processors also
feature an SD Card Slot for playback
of MP3/WAV files stored on an SD
Memory Card. The Event Scheduler
function allows you to play back
these files as music, announcements
or chimes—or even trigger external
devices with a GPI output—at
scheduled times, as well as recall
presets stored within the MTX.
Newly developed digital audio transmission format YDIF
MTX processors feature the newly developed YDIF digital transmission format;
a unique proprietary Yamaha technology that delivers 16ch audio and word
clock transmission via standard CAT5 Ethernet cable. YDIF can be used for
cascading multiple MTX Series or
for feeding audio signal to XMV
Series power amplifiers with very
simple cabling up to 30 metres.
15
MTX Series
On-board Dante network port and MY card slot offer
expandability for larger installations (MTX5-D only)
Dante is the latest audio network technology from Audinate, designed to deliver
multi-channel, uncompressed, low-latency digital audio to multiple locations
over relatively long distances. Equipped with an on-board Dante port, MTX5-D
processors can send and receive up to 16 channels of digital audio using a single
Ethernet cable. MTX5-D processors connect easily to other Dante-enabled devices
such as CL Series mixers or XMV Series
power amplifiers, making system
design and configuration much
simpler for larger venues. MTX5-D
processors offer further expandability
via a MY card slot—easily adopting
many other digital network and audio
formats or processing capabilities
supported by MY cards.
Flexible external control
With DCP Series wall mount digital controllers, the
MTX Series can control the volume and presets
of multiple zones from remote locations. Up to
eight DCP controllers can be linked together for a
maximum of 200m length (the power is also fed
through the cable) lending considerable flexibility
to the installation process. The MTX Series is also
equipped with a Network port that will offer
compatibility with touch panel controllers such
as AMX/Crestron with the release of version 1.1,
as well as GPI ports for general controllers, while
iPhone or iPod touch users can download the
newly developed Wireless DCP app for remote
control your sound solution using the simple,
intuitive operation of your Apple device.
*Wireless DCP can be downloaded from Apple’s App Store at no charge.
*Apple, iPhone and iPod are trademarks of Apple Inc., registered in the
U.S and other countries. App Store is a service mark of Apple Inc.
Two digital effect processors
The MTX Series comes equipped with two digital effect processors which
are useful for entertainment applications— particularly party or banquet
rooms. “Reverb” and “Echo” can be programmed easily using MTX Editor,
eliminating the need for additional outboard gear.
Easy setup and parameter control with MTX Editor
MTX Editor is a software application that lets you to design your system and
adjust parameter settings via an intuitive interface that follows a workflow based
on the system's configuration. MTX Editor also features optimized parameter
presets for specific models of Yamaha speakers to maximize their performance.
MTX3
MTX5-D
Specifications
MTX3
26 x 8 Matrix Mixer / Signal Processor
48kHz
Configuration
Sampling Frequency
MTX3 Rear Panel
Inputs
Analog
Outputs
Analog
Digital
Digital
Control
MTX5-D Rear Panel
SD Card Slot
Dimensions (W x H x D) / Weight
Digital Control Panel
DCP Series
DCP controllers provide flexible
external control of several functions
such as preset recall, levels, and SD
card playback. Three different models
comprise the series featuring various
configurations of switches and volume
knobs. All three models are available
in either US or EU standardized sizes,
built to meet the specifications of
most regions around the globe.
DCP1V4S-US
DCP4S-US
Input Expander/Output Expander
EXi8/EXo8
MTX5-D
34 x 16 Matrix Mixer / Signal Processor
48kHz,
44.1kHz (only available when Dante or MY-Card slot is used
for clock master)
4 x Euroblock (6P, Balanced)
4 x RCA Pin Jack (for ST In 1,2)
RJ45 for YDIF (16ch)
RJ45 for Dante (16ch)
4 x Euroblock (6P, Balanced)
RJ45 for YDIF (16ch)
RJ45 for Dante (16ch)
8 x GPI Input
16 x GPI Input
4 x GPI Output (Open Collector)
8 x GPI Output (Open Collector)
Ethernet 100Base-TX
Ethernet 1000Base-T / Dante
RS-232C
DCP
1
480 x 44 x 362mm (18.9" x 1.7" x 14.3") / 4.8kg (10.6lbs)
480 x 88 x 366mm (18.9" x 3.4" x 14.4") / 6.5kg (14.3 lbs)
YDIF equipped input and output expanders for MTX Series
EXi8 input expanders convert analog microphone/line audio to digital and transmits the signal using Yamaha's YDIF format.
The EXi8's preamps can be controlled remotely from an MTX processor via Ethernet cable. EXo8 output expanders feature 8
channels of DA converters that produce high quality analog audio by converting digital output from MTX Series processors via YDIF.
EXi8
EXo8
Front Panel
Front Panel
Rear Panel
Rear Panel
DCP4V4S-US
MTX Series
16
MTX Editor
Fast and easy set up of your audio system with a single software application
MTX Editor allows you to design sound systems for small to mid-size installations built around MTX Series processors. With a workflow that closely emulates the actual physical configuration of
an installation application, MTX Editor's wizard guides you through a simple yet thorough step process. What's more, in addition to the MTX Series, MTX Editor lets you incorporate EXi8 and EXo8
expanders, DCP Series digital control panels, and even XMV Series power amplifiers into your system and adjust parameter settings accordingly. With MTX Editor, you can design, configure and
manage a complete installation audio system from microphones right through to speakers—with a single program.
The workflow of MTX Editor
Device Configuration
MTX Series parameter settings
By simply following the instructions of the
MTX Editor wizard, you can easily configure
a complete sound system comprised of
MTX Series matrix processors as well as XMV
Series power amplifiers, DCP Series digital
control panels or EXi8/ EXo8 expanders.
Once your system is configured you can
set the parameters for the MTX Series. The
Main window gives you an overview of each
channel's settings and the Channel Edit
window lets you adjust each of the selected
channel's parameters in detail.
Input Processing settings
By selecting GAIN/HPF/EQ you can adjust
3-Band PEQ settings for each input channel,
as well as each microphone channels' HPF.
GATE/COMP sets Gate and Compressor
parameters and FBS/AGC features feedback
suppressors that eliminate acoustic feedback,
as well as the Auto Gain Control function that
maintains a constant output level with input
signals that vary in level.
17
MTX Editor
Matrix/Priority Processing settings
External controller settings
In the matrix mixer, the input channels and
output buses are arranged in a checkerboard
configuration. You can adjust the group
balance for each output bus, or use the
faders to adjust the signal from all input
channels to a specific matrix bus when Sends
On Faders mode is enabled.
MTX Editor can also be used to configure the settings of external controllers. MTX processing
functions can be easily assigned to the switches and knobs of DCP Series wall-mounted controllers
or to the dedicated iPhone/ iPod touch software application.
The signal from the matrix mixer is sent to
8 units of Priority Processor. Here, you can
make detailed adjustments to the parameter
settings of the Ducker function as well the
Ambient Noise Compensator.
Output Processing settings
After Priority Processor settings have been
applied, signals are sent to output channels
through the Router. Each output channel
is equipped with a 4 Band PEQ, Delay and
Speaker Processor. The Speaker Processor
has stored presets for a range of Yamaha
speakers allowing you to easily select the
optimum settings for the speakers in your
system. Settings for 4-Band PEQ and Delay
can also be adjusted to match the audio
output with the acoustic characteristics of
various installation environments.
MTX Editor
18
Power Amplifier
XMV Series
XMV4280 / XMV4140
XMV4280-D / XMV4140-D
A comprehensive line-up to power your sound solution
XMV Series multi-channel power amplifiers combine Class-D efficiency with features designed specifically to benefit commercial installation sound systems. The Series
is comprised of 4 different models with varying output power capabilities and flexible in/out connectivity to accommodate a wide range of installation environments.
High impedance and low impedance … or both
Installed sound applications often demand both high and low impedance
connectivity in the same venue, requiring separate, dedicated amplifiers or
an external transformer. XMV power amplifiers, however, can operate in
both high-impedance (70V/100V line) or low-impedance (4Ω/8Ω) modes
simultaneously, eliminating the need for additional equipment, as well as
streamlining the installation process. XMV power amplifiers also enable both
70V and 100V operation for every pair of channels by simply selecting the
preferred mode using the
Zone 1: Hall & Restrooms
Zone 2: Lobby & Reception
dip switches on the rear
panel. High impedance
operation often requires
the use of two combined
channels in bridge mode,
70V / 100V lines
but with XMV amplifiers,
8Ω/4Ω
70V or 100V mode can be
Zone 3: Bar
Zone 4: Office & Kitchen
assigned to every pair of
channels without affecting
the number of available
output channels.
New “Double Power Mode”
The newly developed Double Power Mode function effectively doubles the
output power of selected channels in order to drive speakers with higher
output power. This means that speakers with varying output capacities can
be powered simultaneously by the same amplifier, adding flexibility to system
design and configuration.
*The number of channels that can
be used will be reduced to half.
XMV4140
19
XMV Series
Selectable input formats for a wider range of
applications
XMV amplifiers come equipped with either
the newly developed YDIF digital audio
format, or Audinate’s digital audio network
Dante. YDIF allows easy setup with the use
of Ethernet cables while Dante models can
be used for larger venues where long distant
cabling is required.
A perfect match for the MTX Series
When XMV power amplifiers are used in systems with MTX series processors,
settings such as the mute on/off or attenuator changes can be set via
computer using the MTX Editor software application. YDIF and Dante ports
make system configuration simple and fast with instant connectivity and
flexible parameter control.
Best installation amp ever?
XMV amplifiers feature an innovative, new, patent pending circuit that
improves the already highly efficient Class D circuit topology, bringing
the efficiency level of the amplifier's output stage up to over 90%.
This is achieved by automatically switching the circuit to match the
corresponding output voltage. In high-impedance connections, both 70V
and 100V operation can be achieved since the circuit is already capable
of operating in high voltages. However, using the same circuit in lowimpedance operation can mean excessive energy loss, so by automatically
switching to a lower voltage drive, efficiency is improved significantly
without sacrificing crucial aspects of the amp's performance such as
keeping the distortion levels to a minimum.
XMV power amplifiers also feature a new switching power supply
equipped with Power Factor Correction, which ensures harmonic control
and decreases the amount of current draw dramatically, yet still maintains
the same output power. This makes circuit breakers less prone to shutting
down, as well as eliminating the need for thicker, heavier cables or a larger,
more powerful system.
Protection features for more reliable operation
Automatic protection functions are an essential part of the XMV Series'
design, ensuring peak performance and reliable operation in less than
ideal situations. Low load impedance, overcurrent, and overheating can all
damage vital amplifier components and threaten their ability to function
effectively. To combat these hazards, XMV Series power amps feature
powerful, intelligent protection functions that can deliver the assurance of
long product life and consistent performance.
XMV4280-D
XMV4140-D
XMV4280
XMV4140
Specifications
Output Power
1kHz, THD+N=1%
XMV4280 Rear Panel
High impedance
Voltage Gain
XMV4140 Rear Panel
XMV4280-D Rear Panel
Input Sensitivity
S/N Ratio
Power Consumption
THD+N
Frequency Response
Crosstalk
Maximum Input Level
Input Impedance
Connectors
4Ω
8Ω
4Ω/ Double Power Mode
8Ω/ Double Power Mode
100V line
70V line
RL=8Ω
RL=8Ω / Double Power Mode
100V
70V
A-weighted
1/8 power (4Ω pink noise)
Idle (4Ω)
Standby
1kHz, half power
8Ω, 100V / 70V, Po=1W, 20Hz - 20kHz
1kHz, half power, 8Ω Att. max, input 150Ω shunt
Analog Input
Digital Input / Output
Speaker Output
Network
Remote, Fault Output
AC IN
Load Protection
Amplifier Protection
XMV4140-D Rear Panel
Power Supply Protection
Cooling Fan
Power Requirements
Dimensions (W x H x D) / Weight
XMV4280
4x 280W
4x 280W
2x 560W
2x 560W
4x 250W / 40Ω
4x 250W / 20Ω
31.7dB
34.7dB
38.2dB
35.2dB
XMV4140
4x 140W
4x 140W
2x 280W
2x 280W
4x 125W / 80Ω
4x 125W / 40Ω
28.7dB
31.7dB
38.2dB
35.2dB
XMV4280-D
4x 280W
4x 280W
2x 560W
2x 560W
4x 250W / 40Ω
4x 250W / 20Ω
31.7dB
34.7dB
38.2dB
35.2dB
XMV4140-D
4x 140W
4x 140W
2x 280W
2x 280W
4x 125W / 80Ω
4x 125W / 40Ω
28.7dB
31.7dB
38.2dB
35.2dB
250W
37W
18.5W
150W
37W
18.5W
+4dBu
≥ 103dB
250W
37W
18.5W
150W
37W
18.5W
≤ 0.1%
0dB, ±1.0dB
≤ -60dB
+24dBu
20kΩ (balanced), 10kΩ (unbalanced)
2x Euroblock (6P, balanced)
2x RJ45 (YDIF IN / OUT)
2x RJ45 (Dante PRIMARY / SECONDARY)
4 pairs x Barrier strip
1x RJ45
Shared with Dante ports
1x Euroblock (3P)
1x AC Inlet
POWER switch on/off: Output mute, DC-fault: Power supply shuts down, Clip limiting
Thermal: Output mute (heatsink temp ≥90°C) (Restored automatically), Overcurrent: Output mute
(Restored automatically), Low load impedance: Output mute (Restored automatically)
Thermal: Amplifier shuts down automatically (heatsink temp ≥100°C) , Integrated power: Gain
reduction (Restored automatically)
2x 3-Speed fan, front-to-back airflow
100V, 120V, 230-240V; 50Hz/60Hz
480 x 88 x 422mm (18.9" x 3.5" x 16.6") / 8.1kg (17.9lbs)
XMV Series
20
Ceiling Speaker / Surface Mount Speaker
VXC/VXS Series
VXC4(W) / VXC6(W) / VXC8(W)
VXS5(W) / VXS8(W) / VXS10S(W) / VXS10ST(W)
A versatile lineup for clear consistent sound
Yamaha designed the new VXC and VXS speakers to accommodate a growing list of applications in the installation market. While these speakers deliver quintessential Yamaha sound quality,
they have also been carefully designed for safe and easy installation. Featuring both ceiling and surface mount options, these speaker series include a comprehensive range of models that
are available in either black or white, or can be painted to match the interior of any application.
VXC Series
Pursuing the best sound for installation
We developed the VXC and VXS Series speakers to address a demand in the installation market for speakers capable of
providing superb music reproduction as well as crystal clear announcements for public address applications. Both series
feature newly customized transducers with large, powerful magnetic circuits that increase driving and braking force
substantially, as well as dedicated tweeter diaphragms and speaker cone paper made from a carefully-created blend
of materials that help optimize sound reproduction. Cabinets are built tough to meet the demands of a wide variety of
commercial environments, constructed from a carefully selected plastic with just the right tensile strength, and designed
with optimized bass-reflex tuning to offer a firm, tight low-end. From the networking components and the materials used
for wiring and soldering, right down to the optimal placement of acoustic absorption material, a great deal of attention has
been paid to even the smallest details of the series' design.
Speaker Design
Several aspects of these speakers' design reflect a strong emphasis on functionality as well
as the aesthetic features of their construction—effectively enhancing sound quality and
speaker performance without disturbing the interior décor of the installation. This concept
is evident in the hexagonal design featured on the grille of both series' speakers that
actually improves sound clarity by raising the aperture ratio. Similarly, the smooth curves
of the surface-mount cabinet's simple yet sophisticated design allow the speakers to be
mounted closely to the wall—while still fully capable of panning and tilting to target service
areas. Even the innovative design of the VXC's tweeter improves sound clarity by providing
unrestricted woofer movement.
21
VXC/ VXS Series
Ceiling speakers for any application
The VXC Series offers three different woofer sizes, allowing you to choose
the speaker that is most suitable for your venue. Each model has an internal
transformer that allows both high and low-impedance drive with just a
single speaker, simply by switching the tap on the baffle. Since a single
speaker can be used for both operations, inventory control is simplified, and
you can easily adapt your system to any changes.
VXS Series
Highly adaptable surface mount speakers
The VXS Series lineup features two full-range models and two subwoofers,
allowing you to choose the optimal model for a particular application and,
if necessary, combine it with a subwoofer
for venues that require a stronger bottom
end. VXS Series full-range models are
equipped with internal transformers that
allow them to operate at both high or low
impedance simply by changing the tap on
the rear of the speaker. Full-range models
also offer IP45-rated protection, ensuring
worry-free use in outdoor applications.
VXC Series
VXS Series
Specifications
VXC4 / VXC4W
Full-range, Bass-reflex
Safe, seamless installation
Speaker Type
Components
Series speakers' Anti-Drop tab allows
them to be mounted temporarily in
the ceiling, freeing your hands for
better safety and ease of installation.
An attached, flexible carrying band
also makes the speakers very portable,
allowing you to carry multiple speakers
at once safely. Additionally, VXC
Series speakers also come complete
with O-rings and tile rails for a safer,
smoother installation.
Coverage Angle*1
Nominal Impedance
Power Rating*2
Sensitivity*3
Maximum SPL
Frequency Range*3
Transformer Taps
Connectors
Color
Dimensions
Weight
Included Accessories
Anti-Drop tab
*1
LF
HF
4" full-range
130° conical
NOISE
PGM
(1W, 1m)
(Calculated, 1m)
(-10dB)
100V
70V
(Grille)
(Diameter x H)
30W
60W
88dB SPL
109dB SPL
80Hz - 20kHz
30W / 15W / 7.5W
30W / 15W / 7.5W / 3.8W
1x Euroblock (4P) (Input: + / -, Loop Thru: + / -)
VXC4: Black / VXC4W: White
Ø225 x 195mm (Ø8.9" x 7.7")
2.6kg (5.7lbs)
O-ring, Tile Rail, Cutout Template, Screws,
Owner's Manual
VXC6 / VXC6W
2-way, Bass-reflex
6.5" Cone
0.75" Soft dome
110° conical
8Ω
75W
150W
90dB SPL
115dB SPL
75Hz - 20kHz
60W / 30W / 15W
60W / 30W / 15W / 7.5W
1x Euroblock (4P) (Input: + / -, Loop Thru: + / -)
VXC6: Black / VXC6W: White
Ø286 x 204mm (Ø11.3" x 8.0")
4.2kg (9.3lbs)
O-ring, Tile Rail, Cutout Template, Screws,
Owner's Manual
VXC8 / VXC8W
2-way, Bass-reflex
8" Cone
1" Soft dome
100° conical
90W
180W
92dB SPL
118dB SPL
55Hz - 20kHz
60W / 30W / 15W
60W / 30W / 15W / 7.5W
1x Euroblock (4P) (Input: + / -, Loop Thru: + / -)
VXC8: Black / VXC8W: White
Ø325 x 259mm (Ø12.8" x 10.2")
7.0kg (15.4lbs)
O-ring, Tile Rail, Cutout Template, Screws,
Owner's Manual
500Hz - 4kHz *2 IEC *3 Half space
Specifications
Flexible mounting for easier configuration
VXS speakers come with a dedicated bracket for safe, troublefree speaker installation. Speakers can be mounted temporarily,
freeing your hands to adjust mounting angles, which can now be
configured consistently
with ease thanks to
the gear guides in the
bracket connectors.
Furthermore, the
bracket base allows VXS
Series speakers to be
mounted on both walls
and ceilings without
the need to prepare a
different set of brackets.
Speaker Type
Components
Coverage Angle
Nominal Impedance
Satellite Impedance
Power Rating*1
Sensitivity*2
Maximum SPL
Frequency Range*2
Transformer Taps
LF
HF
HxV
VXS8 / VXS8W
2-way, Bass-reflex
8" Cone
1" Soft dome
100 x 100
8Ω
NOISE
PGM
(1W, 1m)
(Calculated, 1m)
(-10dB)
100V
70V
Connectors
Environmental
Color
Dimensions
Weight
Included Accessories
*1
IEC *2 Half space
VXS5 / VXS5W
2-way, Bass-reflex
5.25" Cone
0.75" Soft dome
120 x 120
(W x H x D)
VXS10S /VXS10SW
Subwoofer
VXS10ST / VXS10STW
Subwoofer
10" Dual Voice Coil
-
8Ω + 8Ω
75W
150W
89dB SPL
114dB SPL
80Hz - 20kHz
30W / 15W / 7.5W
30W / 15W / 7.5W / 3.8W
1x Euroblock (4P)
(Input: + / -, Loop Thru: + / -)
90W
180W
93dB SPL
119dB SPL
55Hz - 20kHz
60W / 30W / 15W
60W / 30W / 15W / 7.5W
1x Euroblock (4P)
(Input: + / -, Loop Thru: + / -)
IP45
VXS5:Black / VXS5W:White
176 x 280 x 163mm (6.9" x 11.0" x 6.4")
3.5kg (7.7lbs)
Wall / Ceiling mount bracket, Terminal cover
IP45
VXS8:Black / VXS8W:White
278 x 430 x 239mm (10.9" x 16.9" x 9.4")
6.0kg (13.2lbs)
Wall / Ceiling mount bracket, Terminal cover
8Ω + 8Ω
100W + 100W
200W + 200W
95dB SPL
124dB SPL
50Hz - 180Hz
Input: 1x Euroblock (4P)
(CH1: + / -, CH2: + / -)
Satellite Output: 1x Euroblock (4P)
(Out 1: + / -, Out 2: + / -)
95dB SPL
124dB SPL
50Hz - 180Hz
200W / 100W / 50W
200W / 100W / 50W / 25W
Input: 1x Euroblock (4P)
(Input: + / -, Loop Thru: + / -)
Satellite Output: 1x Euroblock (4P)
(Out 1: + / -, Out 2: + / -)
-
VXS10S: Black, VXS10SW: White
260 x 500 x 372mm (10.2" x 19.7" x 14.6")
19kg (41.9lbs)
Wall mount bracket
VXS10ST: Black, VXS10STW: White
260 x 500 x 372mm (10.2" x 19.7" x 14.6")
20kg (44.1lbs)
Wall mount bracket
VXC/ VXS Series
22
Seamlessly connect these, and other Yamaha products
to expand your sound solution possibilities:
Compact Disc Player / Compact Disk Changer
Mixing Consoles
CD-RK Series
MGP Series
2U rack-mountable CD players for commercial installations.
From the preamps, EQ and effects to the Hybrid
Channel functions and iPod/iPhone connectivity—
every aspect, every feature, every sound, establishes the
MGP as a premium mixing console in a class of its own.
Digital Installation Mixer
IMX644
Mixing Consoles
MG Series
A compact, easy operation digital rack mount mixer for installations. The
IMX644 offers effective, error-free operation for inexperienced users as well as
detailed setup and control capability for system integrators.
Whether you have a mixing application that
involves only a few channels, or up to 32 inputs
with a need for flexible signal routing, Yamaha's
MG Series offer a console that will give you the
capacity, control, and performance you deserve.
Digital Mixing Console
Digital Mixing Consoles
01V96i
LS9 Series
Building on the proven configuration of its
predecessors, the new 01V96i now offers USB 2.0
connectivity along with new multi-track recording
features and improved sonic quality.
Incredibly compact, lightweight digital live-sound
consoles with recallable head amps, a built-in USB
memory recorder/player, and stunning sound quality.
Power Amplifier
IPA8200
Highly efficient Class-D amplifier brings 8 x 200W/ch from a compact 2U body.
Digital Mixing Consoles
CL Series
Yamaha CL Series digital mixing
consoles offer an evolved
experience in accessible mixing,
plus sonic purity with sound
shaping capabilities that will give
the most imaginative engineer
unprecedented creative freedom.
23
Other Products
Digital Mixing Engines
Active Loudspeakers
Active Subwoofers
DME Series
DXR Series
DXS Series
These networkable DSP units offer an extensive range of signal processing
capabilities, programmable via a comprehensive graphical interface.
Offering superb high-definition sound and class-leading sound pressure levels—
yet in a more compact and extremely functional design that provides a level of
versatility unmatched by any speaker in its class today.
A new line of compact, high output active subwoofers that match
perfectly with DSR and DXR full-range active loudspeakers.
Loudspeakers
Installation Series
Favorites with discerning contractors and
engineers, these speakers feature UniPhase design and matching sound - even
between different models - for easy system
setup and tuning.
Mini-YGDAI Cards
MY4-AEC
Dugan-MY16
Acoustic Echo Canceller Card
for DME24N/64N
from Dan Dugan Sound Design
High performance conference system
solution with Yamaha AEC technology.
Fully automatic multi-mic mixing that
delivers smooth, professional sound.
Active Loudspeakers
DSR Series
Next-generation active loudspeakers
incorporating high performance
DSP and all-new high power Class-D
amplifiers with PFC switching mode
power supply.
Power Amplifiers
XM Series
4-channel power amplifiers in two varying output power (XM4180: 180W/8 ohms,
XM4080: 80W/8 ohms) that are an excellent choice for installations.
Power Amplifier
Surface Mount Speakers
VS Series
Compact indoor/outdoor speakers for background
music or as part of a PA system for announcements.
XH200
Compact, lightweight 200W + 200W distribution power amp for installed systems.
Power Amplifiers
XP Series
Five superb amplifiers optimized for installation use. Series is available in 5 models,
ranging from 700W to 100W in stereo 8 ohms loads.
Other Products
24
As our first entry of full audio solutions geared toward the commercial installation
market, this lineup of products symbolizes not only a fresh, new and efficient
approach to installed sound, but a platform to build from in the years to come in
order to meet the challenges and demands of a market that is constantly expanding
and evolving. Through continued innovation and a growing foundation of highquality, compatible products, we look forward to a future that will further engage
and support our customers in the commercial installed sound market.
25
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement