Liebert D4224442 racks

Liebert D4224442 racks
Integrated Cabinet Solutions
For Business-Critical Continuity™
Knurr® DCM Enclosures
A Single Cabinet Platform Designed For The Global Market
It All Starts With The Knurr DCM
A Global Cabinet For Your Universe
The Knurr DCM is a new platform from Emerson
Network Power that lets facility managers and
IT professionals manage server, switch, and
termination applications.
Knurr DCM was designed as the base element for
all of Emerson Network Power’s row and rack
solutions and is compatible with all Liebert Power
and Liebert Precision Cooling products.
The Knurr DCM offers all the advanced features
and innovative flexibility required to accommodate
today’s dense and complex IT systems and network
gear.
Knurr DCM simplifies equipment installation,
improves cable management, and increases visibility
and control of equipment inside the rack. The rack
easily integrates power, cooling, and monitoring
systems to provide a complete support system.
Standardization For The Entire Data Center: It Starts
With The Knurr DCM
Knurr DCM is the basic building block for all of the Emerson
Network Power row- and rack-based solutions. It is also
compatible with every Liebert power, cooling, monitoring and
cable management product.
Liebert XDR rear door cooling module, part of the Liebert XD
system, attaches easily to the Knurr DCM rack — an extremely
efficient high density cooling solution.
Liebert MB Modular Bus Power distribution mounts directly
to the frame of the Knurr DCM with tool-less mechanical
fasteners. This mounting style not only brings high capacity
power distribution directly to the rack and row level, but also
saves significant amounts of labor time and cost.
Emerson Network Power offers several methods of Cold Aisle
Containment, with styles that either mount directly to the
cabinet or to the ceiling in the data center. Containment is
an effective means to increase capacity and efficiency of the
room cooling system.
Emerson Network Power family of rack PDUs effectively
distribute power to the rack level. These PDUs are designed to
easily mount in the Knurr DCM platform.
The cabinet of the Liebert CRV row-based precision cooling
system is based on the Knurr DCM frame — a perfect physical
match that provides efficient, effective rack cooling.
2
Features
Roof Pre-Drilled
For XDV
Accepts XDV With No
Need For Drilling
83+% Open Area
For Improved Airflow, Highest In The Industry
Tool-Less Shelf
Mounts In Square
Holes On 19” Rails In
Seconds
Spring Nut In T-Slot
Allows Component
Mounting Anywhere In
Cabinet Frame
Doors Open to 135˚
Lift-Off Tool-Less Internal
Hinges Allow For Easy
Door Removal And Greater
Security
Lightweight
Aluminium Frame
Makes The Cabinet Easier
For A Single Person To
Move
Tool-Less Cable
Management on Frame
Insert And 1/4 Turn,
Installs In A Second
Low Profile Casters
Allows 42U Cabinet
To Roll Through
Standard Doorway
3
Knurr Quick Ship
You Need Cabinets
Within A Week.
Well, How Does
Three Days Sound?
Because with the Knurr Quick Ship Program, you can order
fully assembled cabinets and accessories to be shipped
within 72 hours.
Get what you need, when you need it.
Enclosure height of 42U.
Widths of 24” or 32”.
Depth of 44”.
Side panels (with or without).
Mounting and cable.
management options.
The following items are available through the Knurr Quick Ship Program:
4
Part Number
Description
D4224442
42U x 24" W x 44"" D with side panels
D4224440
42U x 24" W x 44"" D with NO side panels
D4232442
42U x 32" W x 44"" D with side panels
D4232440
42U x 32" W x 44"" D with NO side panels
Accessory Part Numbers
Description
002185000
Fixed Tool less shelf
002185050
Cable Management Lobster Claw (10)
002185060
Cable Management Velcro Ring (10)
002185070
Cable Management Lobster Claw (100)
002185080
Cable Management Velcro Ring (100)
035351081
24 receptacle NEMA 5-20R, 30 Amp, L5-30 locking plug, 10' cord
035352061
24 receptacle IEC C-13, 30 Amp, L6-30 locking plug, 10' cord
539608G2
Tool less baying Kit for 42U cabinets
Data Center Ready Racks
Convenient two
rack solution
includes
clustering kit.
Ready-To-Install Rack And Power Bundles
Protect your IT equipment with data center ready racks from Emerson Network
Power, featuring the innovative Knurr DCM rack integrated with reliable Liebert
power protection and monitoring products.
Components
Specifications
1 Rack;
1800W,
120V
Power
1 Rack;
2700W,
120V
Power
1 Rack;
2700W,
208V Power
1 Rack;
4800W, 120V
Power
1 Rack;
4800W,
208V Power
1 Rack;
9000W,
208V Power
2 Racks;
4800W,
120V Power
2 Racks;
4800W,
208V Power
2 Racks;
9000W,
208V Power
010200065
010200066
010200067
010200068
010200069
010200090
010200070
010200071
010200072
Knurr DCM Rack
Enclosure*
42U *
42U *
42U *
42U *
42U *
42U *
(2) 42U *
(2) 42U *
(2) 42U *
Available Rack U
40U
40U
40U
38U
38U
36U
80U
80U
78U
6kVA/
4800W
120/208V
Input: Nema
L14-30P;
Output:
(4)NEMA
L5-15/20R
& (2) NEMA
L6-30R.
Includes
Maintenance
Bypass.
Battery:
Internal
Battery Kits
10kVA/
9000W
120/208V
Input
hardwired;
Output (4)
5-20R, T-type
(4) L6-30R
Includes
Maintenance
Bypass
Battery
Internal
Battery Kits
6kVA/
4800W
120/208V
Input: NEMA
L14-30P
Output:
(4) NEMA
L5-20R & (2)
NEMA
L530R Includes
Maintenance
Bypass.
Battery
Internal
Battery Kits
6kVA/
4800W
120/208V
Input: NEMA
L14-30P
Output: (4)
NEMA L515/20R & (2)
NEMA
L630R Includes
Maintenance
Bypass.
Battery
Internal
Battery Kits
10kVA/
9000W
120/208V
Input
hardwired;
Output (4)
5-20R, T-type
(4) L6-30R
Includes
Maintenance
Bypass
Battery
Internal
Battery Kits
Part Description
Liebert Model
Number
Liebert GXT3
UPS W/rack
mounting kit
2kVA/
1800W
120V Input:
NEMA
5-20P;
Output: (6)
5-20R
3kVA/
2700W
120V Input:
NEMA
L5-30P;
Output:
(6) 5-20R
(1) L5-30R
3kVA/
2700W 208V
Input: NEMA
L6-20P:
Output (2)
L6-15R (1)
L6-20R
6kVA/ 4800W
120/208V
Input: Nema
L14-30P;
Output: (4)
NEMA L5-20R
& (2) NEMA L530R. Includes
Maintenance
Bypass. Battery:
Internal Battery
Kits
Knurr DI-STRIP
Rack PDU
120V
Input
5-20P
Output
(12) NEMA
5-20R
(t-slot)
120V
Input
L5-30P
locking
Output
(24) NEMA
5-20R
(t-slot)
208V
Input NEMA
L6-20P
Locking
Output
(12) IEC-C13
(2) 120V
Input NEMA
L5-30P Locking
Output
(24) NEMA
5-20R (t-slot)
208V
Input NEMA
L6-30P
Locking
Output
(20) IEC-C13
& (4)
IEC-C19
(2)208V
Input NEMA
L6-30P
Locking
Output
(20) IEC-C13
& (4) IEC-C19
(2) 120V
Input NEMA
L5-30P
Locking
Output
(24) NEMA
5-20R (t-slot)
208V
Input NEMA
L6-30P
Locking
Output
(20) IEC-C13
& (4)
IEC-C19
(2)208V
Input NEMA
L6-30P
Locking
Output
(20) IEC-C13
& (4) IEC-C19
Liebert
Intellislot UPS
WebCard
YES
YES
YES
YES
YES
YES
YES
YES
YES
5 Client
10 Client
10 Client
20 Client
20 Client
20 Client
20 Client
20 Client
20 Client
Liebert Multilink
UPS Shutdown
Software
* Knurr DCM Rack Enclosure includes two sets of 19” rails, mounting hardware, side panels, perforated doors, cable entry roof, low profile casters, and
Velcro cable management strips. Cabinet dimensions: 78”H x 23”W x 44”D.
5
Cabinet Part Numbering Description
Use The Matrix To Create Your Part Number.
Choose, in order, the: height, width, depth, front door type, rear door type, and side panel number and type.
Sample Part Number:
This part number indicates a DCM cabinet with 46” height frame, 23.6” width with sides, 43.3” depth with doors, single
perforated front door, split perforated doors, two side panels, black paint and two sets of 19” rails.
D
C
Product
Product
D= DCM
6
B
Height Width
Height
Depth
Width
1
2
2
Front Doors Rear Doors Side Panel
Depth
Front Doors
Rear Doors
1
0
N
Color
–
Design
Region
Side Panel
Color
Continent
of Design
C= 1200mm
(24U)
6=600mm
(23.6”)
A=1000mm
(39.4”)
0=No door
0=No door
0=None
K= 2000mm
(42U)
7=700mm
(27.6”)
B=1100mm
(43.3”)
1=Single perforated
door
1=Single perforated
door
1= 1 Side panel
E=EMEA
L= 2100mm
(45U)
8=800mm
(31.5”)
C= 1200mm
(47.3”)
2=Split perforated
doors
2=Split perforated
doors
2= 2 Side panels
N=North
America
3=1 Partition
G=Global
1=Black
RAL 7021
A=Asia
Pacific
5=1 Side panel and
1 partition panel
Multiple Sizes To Fit
Your Needs
The table to the right shows
the measurements for the
different height, width and
depth options available in the
Knurr DCM Racks.
Part
Description
Frame
H
Height
D
Width
Depth
Leveling Feet
Casters
IN
MM
IN
MM
IN
MM
C
46.0
1168
46.6
1186
47.1
1199
K
77.5
1968
78.1
1986
78.6
1999
L
82.8
2103
83.4
2121
83.9
2134
No Sides
W
6
Part Number
With Sides
IN
MM
IN
MM
6
23.3
591
23.6
600
7
27.2
691
27.6
700
8
31.1
791
31.5
800
No Doors
With Doors
IN
MM
IN
MM
A
38.8
986
39.4
1000
B
42.8
1086
43.3
1100
C
46.7
1186
47.2
1200
DCM Rack Dimensions
Height
45U 2100mm
42U 2000mm
Dimensions That Meet Your
Requirements
The Knurr DCM cabinet is Emerson
Network Power’s global rack,
available in all corners of the world
for data center consistency.
24U 1200mm
The 42U x 44” (1100mm) deep
rack is the global standard for all
of Emerson Network Power’s row
based Power and Cooling products,
ensuring data center consistency.
Metric footprint for global
applications
Seismic versions available.
Width
23.6 in 600mm
27.6 in 700mm
31.5in 800mm
39.4 in 1000mm
43.3 in 1100mm
47.2 in 1200mm
Depth
7
Cable Management
Full height PDU bracket, that doubles as a cable management rail, available as an option.
Two ¼ turn tool-less cable management pieces offer the ultimate in flexibility in cable
management. These can be installed in any internal frame surface, on the outside edge of
the 19” rail or on the PDU/Cable Management rail.
The Knurr DCM top cover and horizontal cable routing system easily directs cables along
the top of the row of racks.
Velcro Piece, tool-less
Cable Management
Description
Part Number
Individual Cable Management
Velcro Piece, tool-less, pack of 10
002185060
Velcro Piece, tool-less, pack of 100
002185080
Lobster Claw Piece, tool-less, pack of 10
002185050
Lobster Claw Piece, tool-less, pack of 100
002185070
Lobster Claw Piece, tool-less
Horizontal Cable Management 19” mount
1U 19” mount cable routing panel with D Rings
011171448
1U 19” mount cable routing panel with cable pass through
011170208
19” horizontal cable support trough
050400558
Vertical Cable Management
Description
Part Number
Kit of (2) 18U fingers with 1U center spacing, mounts tool lessly on 19” rails
010200078
Top Cover based Horizontal cable routing system, 1 piece includes front
and rear horizontal trim pieces for 600mm (24") wide Knurr cabinets.
Mounts tool-lessly on top cover.
537876G1
Top Cover based Horizontal cable routing system, 1 piece includes front and
rear horizontal trim pieces for 700mm (28") wide Knurr cabinets. Mounts
tool-lessly on top cover.
537887G1
Top Cover based Horizontal cable routing system, 1 piece includes front
and rear horizontal trim pieces for 800mm (32") wide Knurr cabinets.
Mounts tool-lessly on top cover.
537877G1
Kit of 2 front to back trim pieces for Knurr cabinets. 1 each for end of aisle.
For 1000mm (40") deep Knurr cabinets. Mounts tool-lessly on top cover.
537878G1
Kit of 2 front to back trim pieces for Knurr cabinets. 1 each for end of aisle.
For 1100mm (44") deep Knurr cabinets. Mounts tool-lessly on top cover.
537879G1
Kit of 2 front to back trim pieces for Knurr cabinets. 1 each for end of aisle.
For 1200mm (48") deep Knurr cabinets. Mounts tool-lessly on top cover.
537880G1
8
1U 19” Mount Cable Routing Panel, with
cable pass through
Top Cover Horizontal Cable Routing
System and Front To Back Trim Pieces
Air Blanking Panels, Shelves And Drawers
Shelves, Blanking Panels and Drawers
Fixed tool-less shelf
Description
Part Number
Fixed tool-less shelf, 150 lb rating
002185000
2U fully closable and lockable
drawer, mounts on 19” rails
011139278
Tool-less telescopic shelf, 150 lb
rating
535809G1
“L” shaped depth support rails, 2
pieces
536645G1L
1U tool less blanking panel that
mounts simply in 19” rails with
square holes. Qty: Box of 10
010200087
2U tool less blanking panel that
mounts simply in 19” rails with
square holes. Qty: Box of 5
010200088
2U Drawer, mounts on 19” rails
Tool-less Telescopic Shelf
Tool-less Telescopic Shelf
“L” Shaped Depth Support Rail
Vertical Blanking Panels
Full height vertical blanking panels that
mount to outside edge of 19” rail and
extend to the plane of the side panel.
The vertical panels for the DCM rail
utilize 2 half height panels per side.
Each kit is enough for 1 cabinet. Each
panel has three 1U vertical cutouts that
may be used for cable pass through or
mounting, or may be covered with the
included metal blanking panels.
Dimension
Part Number
42U x700mm (28")
539952G1L
42U x 800mm (32")
539957G1L
45U x700mm (28")
539961G1L
45U x 800mm (32")
539962G1L
Air Diverter for IT Switches
4U
540785G1L
12U
540785G2L
15 U
540785G3L
Set of (2) 19” Rails
24U
539991G1
42U
539814G1
45U
539818G1
Tool-less Blanking Panel
9
Side Panels, Partition Panels,
And Doors
Knurr Handles And Lock Accessories
Knurr DCM® Doors
Handles and Lock Accesories
Part Number
Doors
Part Number
Handle for Knurr DCM Cabinet
000784649
24U x 24" (1200x600) single door
538444G1L
Lock Insert kit for DCM Handle, 1
insert and 2 keys
540275G1L
24U x 28" (1200x700) single door
538444G2L
24U x 32" (1200x800) single door
538444G3L
Side panel insert and 2 keys
011399067L
24U x 24" 1(200x600) split door
539273G1L
24U x 28""1(200x700) split door
539273G2L
24U x 32" 1(200x800 split) door
539273G3L
42U x 24" (2000x600) single door
538444G4L
42U x 28" (2000x700) single door
538444G5L
42U x 32" (2000x800) single door
538444G6L
42U x 24" (2000x600) split door
539273G4L
42U x 28" (2000x700) split door
539273G5L
42U x 32" (2000x800) split door
539273G6L
45U x 24" (2100x600) single door
538444G7L
45U x 28" (2100x700) single door
538444G8L
Part Number
45U x 32""(2100x800) single door
538444G9L
24U x 40" (1200x1000)
538521G1L
45U x 24" (2100x600) split door
539273G7L
24U x 44" (1200x1100)
538521G2L
45U x 28" (2100x700) split door
539273G8L
24U x 48" (1200x1200)
538521G3L
45U x 32" (2100x800) split door
539273G9L
42U x 40" (2000x1000)
538521G4L
42U x 44" (2000x1100)
538521G5L
42u x 48" (2000x1200)
538521G6L
45U x 40" (2100x1000)
538521G7L
45U x 44" (2100x1100)
538521G8L
45U x 48" (2100x1200)
538521G9L
Knurr Partition Panels
Partition Panels
Part Number
42U x 40" (2000x1000)
539920G1L
42U x 44" (2000x1100)
539920G3L
42u x 48" (2000x1200)
539920G5L
45U x 40" (2100x1000)
539920G7L
45U x 44" (2100x1100)
539920G9L
45U x 48" (2100x1200)
539920G11L
Knurr DCM® Side Panels
Side Panels
Handle for Knurr
DCM Cabinet
10
Partition Panel
42u x 48”
Doors come standard with push
button lock insert. Cabinet can
be left unlocked or locked for
greater security.
Additional locking systems,
including unique lock inserts
or electronic locks available as
options.
The 42U x 24” (600mm) wide
product readily accepts the
Liebert XDR rear door high
density cooling system. This
system provides 20kW of passive
cooling, essentially rendering the
cabinet “heat neutral” up to the
rated heat load.
Side Panel
Open base for cable entrance.
Leveling feet are standard with
casters an easy add option.
All panels (tops, side panels
and 19” rails) are electrically
grounded to the frame. A
grounding plug is provided,
making it easy to install your
ground wire to electrically
ground the cabinet to building
earth.
Side panels have optional locking
system and are easily released.
Cable Hardware And Accessories
Hardware And Other Rack Accessories
Low profile1/4 turn fastener
High profile1/4 turn fastener
Description
Part Number
M5 cage nuts, screws and washers, bag of 50 each
538569G1
M5 Spring Nuts, bag of 50
050413409
Low profile, 1/4 turn plastic mechanical fastener, bag of 10
010200085
High profile, 1/4 turn plastic mechanical fastener, bag of 10
010200086
1/4 turn metal mechanical fastener, bag of 10
536650G1
Caster Kits
1/4 Turn Metal Fastener
Horizontal Caster Bracket
Description
Part Number
Set of 2 for 600mm (24") wide Knurr DCM cabinet
539994G1
Set of 2 for 700mm (28") wide Knurr DCM cabinet
539996G1
Set of 2 for 800mm (32") wide Knurr DCM cabinet
539997G1
Floor Anchor Kit
Description
Part Number
Set of 4 floor anchor kits
011309347
Baying / Cluster Kits
Floor Anchor Kit
Tool-less Baying/Cluster Kit
Fan For Top Cover
Description
Part Number
24U Tool less baying/cluster kit, 1 set to cluster 2 cabinets
539608G1
42U Tool less baying/cluster kit, 1 set to cluster 2 cabinets
539608G2
45U Tool less baying/cluster kit, 1 set to cluster 2 cabinets
539608G3
Fans For Top Cover
Description
Part Number
1000L Low noise
163796G1L
1000H high ambient
163796G3L
Anti Tip Leg System
Description
Part Number
Anti Tip Leg System
540254G1L
Anti Tip Leg System
11
Rack PDU (Power Distribution Units)
It is rare to have a rack discussion
without also talking about the
rack PDU. According to Data
Center Users’ Group™ findings,
the average power consumption
in the Enterprise Data Center is
now approximately 8kW per rack,
with projections to grow to 10kW
per rack by 2012. In the Small to
Medium Business space, (SMB)
the average today is 6kW per rack.
Couple this increased power density
with various monitoring and control
needs, and the issue of proper
PDU selection becomes critical to
effective Data Center infrastructure
deployment.
The Emerson Network Power family
of rack PDU features varying levels
of monitoring and control. These
PDUs offer choices of input phase,
input/output ampacity and input/
output voltage to provide you with
the best solution for the application
you are facing today, or foresee in
the future.
Liebert MPX:
Liebert MPH:
Knurr DI-STRIP:
This Adaptive
Rack PDU offers
breakthrough,
configurable/
modular power
and management
technology for
the dynamic
Data Center,
where change in
receptacle type
and/or voltage
may be foreseen
over the upcoming
years. This family
offers products
ranging from
1.9kW-14.4kw of
output.
The Managed Rack
PDU offers several
levels of metering
in addition to
control capabilities
with connected
equipment. This
family offers
products ranging
from 1.9kW to
8.6kW.
For Data Centers
with basic
distribution needs,
the Basic Rack PDU
delivers simple
and expandable
distribution in a
robust package.
The basic offering
from Knurr, is
available in a
family of products
ranging from 1.424.4kW of output.
Highest Standard Operating
Temperature in the Industry:
Each rack PDU is rated for operation
up to 55C/131F, delivering reliable
performance in hostile back-of-therack environments.
Number of Rack PDU’s required to supply 8kW of Output Power, based on Input
Phase, Input Amps and Supply.
Broadest Offering of Rack PDU:
Basic to adaptive solutions to fit any
rack distribution needs.
Input Phase
Input Amps
Input Voltage
kW Output
# PDUs
1
15
120
1.4
6
Rugged Construction:
1
20
120
1.9
5
Engineered to be reliable and long
lasting.
1
30
120
2.9
3
1
15
208
2.5
4
Note: For more information on
configuring a rack PDU to meet
specific site needs, consult Emerson
Network Power Rack PDU Systems
Product Selection Guide (SL-20828)
1
30
208
5.0
2
3
30
208
8.6
1
3
60
208
17.3
1
12
Liebert MPX — Adaptive Rack PDU
Now you can meet the challenge of future
connected power requirements with Liebert
MPX, the most responsive and adaptive rack
PDU available. Thanks to Liebert MPX adaptive
technology, you can economically increase the
availability of critical systems by leveraging hotswappable modular power — and manage it all
the way to the receptacle level.
Reconfigurable Power Capacity And
Distribution
Liebert MPX is the perfect choice to respond to the
needs of a growing data center. Relocate or add IT
equipment to support changing needs, by easily
reconfiguring the power input and distribution.
Liebert MPX Features:
Industry leading operating temperature — up
to 55˚C /131˚F to support hot Internal rack
environments.
Liebert Power Monitoring Capabilities
The operation of Liebert MPX can be monitored using:
Liebert RPC Rack PDU Card
Liebert Nform Monitoring System
Liebert SiteScan® Web Centralized Monitoring System
Secure Web/SNMP Interfaces
Liebert RPC-BDM Local Display Module
Scalable Design Allows Onsite Configuration To
Fit Immediate IT Equipment Needs
The Liebert MPX Adaptive Rack PDU features essential
characteristics to support fast-paced, growing data
centers. Hot swappable output power deploys easily to
get IT equipment online quickly.
To configure your Liebert MPX, simply follow these easy
steps:
Accurate power metering of +/-1% voltage &
current for assured oversight.
1.Select a Power Rail Chassis — distributes power and
communications to all of the support modules
Energy and power metering down to the individual
receptacle.
2.Select a Power Entry Module — connects input power
to power rail chassis. May be reconfigured to support
changing power needs, single and three phase input.
Can be positioned for top or bottom rack entrance.
Comprehensive alarming including notification of
overloaded branch circuits.
Environmental sensing with threshold and alarm
set-points.
Notification on the loss or removal of individual
rack equipment loads.
IP consolidation via Rack PDU Array™.
Liebert MPX Benefits:
Adaptive capacity, distribution, monitoring,
control and management of critical devices.
Flexibility to respond to constant change.
Buy only what you need and build on your
investment.
Secure communication.
3.Select an Input Power Cord — allows easy power
reconfiguration to change input power to meet
changing requirements.
4.Select the Rack PDU Card (Liebert RPC) — provides
upgradable network communications, sensor and
local display interface.
5.Select the Rack PDU Display — displays power
parameters and alarms for up to four Liebert MPX
systems. Display orients for horizontal or vertical
installation and reading.
6.Select Branch Receptacle Modules — provide
hot swappable output power connectivity and
communications management. May be remotely
controlled and metered, providing operator flexibility
and allowing increased site security.
13
15
Liebert MPH
Liebert MPH Features:
Monitors electrical and environmental parameters with set
threshold and alarm tools.
Industry leading operating temperature—up to 55˚C/131˚F to
support hot internal rack environments.
Controls and manages individual receptacles.
Predicts overcurrent conditions before they become critical.
Remote monitoring at strip and branch.
Part Number
Card-based communications. Local displays are easily located to
suit a crowded and changing rack environment.
Supports mounting in 19” EIA, 42U rack environments—offered
in vertical, zero U and rackmount form factors.
Allows you to predict failing conditions before they occur
and proactively manage connected equipment for maximum
uptime.
Flexible power cord mount is user adjustable for horizontal or
vertical orientations.
Voltage
Amps
Input
Phase
Input Plug
Output Receptacles
Branch Monitored /
Receptacle Controlled
Form Factor
MPH-NBR09AXXC30
120
20
1PH
L5-20P
(9) Nema 5-20R
Branch Monitored
Rackmount
MPH-NBR09AXXD30
120
30
1PH
L5-30P
(9) Nema 5-20R
Branch Monitored
Rackmount
MPH-NBR09NXXE30
200-240
20
1PH
L6-20P
(9) C-13
Branch Monitored
Rackmount
MPH-NBR09NXXF30
200-240
30
1PH
L6-30P
(9) C-13
Branch Monitored
Rackmount
MPH-NBV27AXXC30
120
20
1PH
L5-20P
(27) Nema 5-20R
Branch Monitored
Vertical
MPH-NBV27AXXD30
120
30
1PH
L5-30P
(27) Nema 5-20R
Branch Monitored
Vertical
MPH-NBV27NXXE30
200-240
20
1PH
L6-20P
(27) C-13
Branch Monitored
Vertical
MPH-NBV27NXXF30
200-240
30
1PH
L6-30P
(27) C-13
Branch Monitored
Vertical
MPH-NBV27NOXF30
200-240
30
1PH
L6-30P
(21) C-13 & (6) C-19
Branch Monitored
Vertical
MPH-NBV27AXXH30
120/208
30
3PH
L21-30P
(27) Nema 5-20R
Branch Monitored
Vertical
MPH-NBV27NXXH30
120/208
30
3PH
L21-30P
(27) C-13
Branch Monitored
Vertical
MPH-NBV27ANXH30
120/208
30
3PH
L21-30P
(21) C-13 & (6) 5-20R
Branch Monitored
Vertical
MPH-NBV27NOXH30
120/208
30
3PH
L21-30P
(21) C-13 & (6) C-19
Branch Monitored
Vertical
MPH-NCR09AXXC30
120
20
1PH
L5-20P
(9) Nema 5-20R
Receptacle Controlled
Rackmount
MPH-NCR09AXXD30
120
30
1PH
L5-30P
(9) Nema 5-20R
Receptacle Controlled
Rackmount
MPH-NCR09NXXE30
200-240
20
1PH
L6-20P
(9) C-13
Receptacle Controlled
Rackmount
MPH-NCR09NXXF30
200-240
30
1PH
L6-30P
(9) C-13
Receptacle Controlled
Rackmount
MPH-NCV27AXXC30
120
20
1PH
L5-20P
(27) Nema 5-20R
Receptacle Controlled
Vertical
MPH-NCV27AXXD30
120
30
1PH
L5-30P
(27) Nema 5-20R
Receptacle Controlled
Vertical
MPH-NCV27NXXE30
200-240
20
1PH
L6-20P
(27) C-13
Receptacle Controlled
Vertical
MPH-NCV27NXXF30
200-240
30
1PH
L6-30P
(27) C-13
Receptacle Controlled
Vertical
MPH-NCV27NOXF30
200-240
30
1PH
L6-30P
(21) C-13 & (6) C-19
Receptacle Controlled
Vertical
MPH-NCV27AXXH30
120/208
30
3PH
L21-30P
(27) Nema 5-20R
Receptacle Controlled
Vertical
MPH-NCV27NXXH30
120/208
30
3PH
L21-30P
(27) C-13
Receptacle Controlled
Vertical
MPH-NCV27ANXH30
120/208
30
3PH
L21-30P
(21) C-13 & (6) 5-20R T-Slots
Receptacle Controlled
Vertical
MPH-NCV27NOXH30
120/208
30
3PH
L21-30P
(21) C-13 & (6) C-19
Receptacle Controlled
Vertical
14
Knurr DI-STRIP
Knurr DI-STRIP Features:
Full-length brass busbar on Standard
models enhances operational reliability.
Multiple configurations and input power
options available, including international
compatibility.
Standard system extruded casing and
a HighPower system heavy duty casing
provide durability.
The addition of the Basic Rack PDU
Expansion Unit allows for growth.
10ft. (3m) power supply cable offers room
for movement.
Reliable and robust solution.
Worldwide approvals and certification.
Industry leading operating temperature —
up to 55˚C/131˚F to support hot internal
rack environments.
Simple and quick installation on the rack’s
extrusion requires minimal space and
reduces installation time.
Knurr DI-STRIP Basic
P/N
Amps
Input Phase
Voltage
Input Plug
Output Receptacles
Mounting
Configuration
035351011
15A
1PH
120V
5-15P
(9) 5-15R
Vertical
035351041
20A
1PH
120V
L5-20P
(9) 5-20R
Vertical
035351021
15A
1PH
120V
5-15P
(12) 5-15R
Vertical
035351031
15A
1PH
120V
5-15P
(18) 5-15R
Vertical
035351051
20A
1PH
120V
5-20P
(12) 5-20R
Vertical
035351061
20A
1PH
120V
L5-20P
(12) 5-20R
Vertical
035351071
20A
1PH
120V
IEC-C20
(12) 5-20R
Vertical
035351081
30A
1PH
120V
L5-30P
(24) 5-20R
Vertical
035352011
20A
1PH
208-240V
L6-20P
(9) IEC-C13
Rack Mount
035352021
20A
1PH
208-240V
IEC-C20 Inlet
(9) IEC-C13
Rack Mount
035352041
20A
1PH
208-240V
IEC-C20
(9) IEC-C13
Rack Mount
035352051
30A
1PH
208-240V
L6-30P
(4) IEC-C14
Rack Mount
035352031
20A
1PH
208-240V
L6-20P
(12) IEC-C13
Vertical
035352041
20A
1PH
208-240V
IEC-C20 Inlet
(12) IEC-C13
Vertical
035352061
30A
1PH
208-240V
L6-30P
(24) IEC-C13
Vertical
035352078
30A
1PH
208-240V
L6-30P
(20) IEC-C13 and (4) IEC-C19
Vertical
035353011
30A
3PH
120/208V
L21-20P
(6) IEC-C19
Vertical
035353021
20A
3PH
120/208V
L21-20P
(18) IEC-C13 and (6) IEC-C19
Vertical
035353031
20A
3PH
120/208V
L21-20P
(27) IEC-C13 and (6) IEC-C19
Vertical
035353041
20A
3PH
120/208V
L21-20P
(27) 5-20R
Vertical
035353051
30A
3PH
120/208V
L21-30P
(18) IEC-C13 and (6) IEC-C19
Vertical
035353061
30A
3PH
120/208V
L21-30P
(27) IEC-C13 and (6) IEC-C19
Vertical
035353078
60A
3PH
120/208V
IEC60309
(42) IEC-C13 and (6) IEC-C19
Vertical
035353088
50A
3PH
120/208V
2 X IEC60309
(42) IEC-C13 and (6) IEC-C19
Vertical
15
Rack PDU Mounting Brackets For Knurr DCM
All Liebert and Knurr Rack PDUs easily integrate into the Knurr DCM cabinet. Description
Part Number
PDU Mounting Brackets for both Rail Systems (DCM and Z Shaped)
2 piece PDU mounting bracket system for 700mm (28”) and 800mm (32”)
wide cabinets with Knurr DCM rail system. Holds (1) 2” wide max PDU
with quick mount system. All Knurr DI-STRIP and Liebert MPH in catalog
*EXCEPT* 03535302078, 0353532088
For right hand rail
539917G1L
For left hand rail
539918G1L
PDU Mounting Bracket
Description
Part Number
Full height PDU mounting bracket, 4” wide. Holds (2) 2” wide max PDU’s
with Quick Mount button system (all Knurr DI-STRIP and Liebert MPH listed
in catalog) *EXCEPT* 035352078, 0353532088
42U cabinets
539486G1L
45U cabinets
539487G1L
Full height PDU mounting bracket, 8” wide. Holds (3) 2” wide max PDU’s with
Quick Mount button system (all Knurr DI-STRIP and Liebert MPH listed in catalog)
or (1) Liebert MPX PDU. *EXCEPT* 0353532078, 0353532088. *NOTE* 8”
bracket may only be used on 1100mm and 12000 mm deep cabinets
42U cabinets
540084G1L
45U cabinets
540085G1L
Full Height PDU Mounting
Brackets (4” and 8”)
16
Liebert MB Modular Busway
Liebert MB Busway provides high density power distribution to
the rack while eliminating cable clutter that can reduce airflow.
System Compatibility
Liebert MB is compatible with the Knurr DCM rack and the entire family
of Liebert power products—rack and room PDUs, UPS systems and
surge protective devices—providing power distribution and protection.
Rackmount Liebert MB installs on top of Knurr DCM rack.
Works with Liebert MPX, Liebert MPH and Knurr DI-STRIP Rack PDUs.
Works with row-based UPS and distribution.
Flexibility
Easy to change bus plugs.
Available in 100, 225 & 400A ratings.
Increases space efficiency and improves airflow.
Integrates easily into new or existing datacenter layouts.
Provides dual bus or single bus configurations.
Higher Availability
Fully rated design.
Certified to UL 857 & CSA 22.2.
Hot swappable bus plugs keep systems up and running even during
changes.
Lowest Total Cost Of Ownership.
Requires fewer and less expensive power cables.
Installs with 15-30% less time and cost compared to cables and
conduit.
Installs with tool-less mounting to Knurr DCM Racks.
Plug-n-play bus plugs to rack PDU’s can be installed by anyone—no
electrician needed.
Ideal Applications
Data centers of any size.
Raised and non-raised floors.
Single or Dual bus configurations.
Low or high-density power distribution.
Part No: 539619G1L
Supports single
feed.
Use 1 bracket for
every 5’ bus run.
Part No: 540536G1L
Supports A and B
feeds.
Use 1 bracket for
every 5’ bus run.
Data centers with frequent configuration changes.
Modular Busway Mounting Bracket
17
Cold Aisle Containment
Emerson Network Power offers three
types of Cold Aisle Containment
systems and flexible door options.
Cool Cap
This door, ceiling or combined solution
is designed for Knurr DCM cabinets.
Cool Cap is physically attached to
the rack, and features swing doors
with Lexan (polycarbonate) windows.
The ceiling structure is very similar in
concept to a drop ceiling. It has sheet
metal runners that span the width of the
aisle, allowing Lexan (instead of foam)
sheets to be dropped in.
Flex Cap
This door, ceiling or combined solution
uses a curtain design to accommodate
non-uniform rack heights. While it is the
most flexible solution to deploy, it does
require a drop ceiling for it to work. The
design is a simple one that incorporates
standard fire detection and suppression.
Dome Cap
This ceiling solution that is designed
exclusively for a 4’ aisle and requires a
uniform row to work. If that uniformity
is present, this is the simplest ceiling
solution to implement. It can be
used in conjunction with any of the
door solutions to make it a combined
solution.
Door Options
Swing doors or curtain doors can be
chosen for the ends of the aisle. In the
event of an emergency, the cold aisle
can be quickly exited be simply pushing
the doors open, or moving the curtain
out of the way. The doors are fitted with
Lexan windows.
18
Cool Cap
This is a door, ceiling or combined solution designed for Knurr DCM
cabinets,But in a uniform row, should work with the vast majority of other
rack manufacturer’s racks as well.
The top covers are transparent Lexan so the room’s lighting can be used. The
covers are easy to remove for servicing.
Since it attaches directly to the rack, it is essential that the two rows of
racks have uniform heights along the total length of the aisle. The Cool Cap
requires a continuous run, so there cannot be gaps, such as missing cabinets
in the line-up or obstructions, such as columns or pillars in the row.
Flex Cap
Flex Cap is a door, ceiling or combined solution that uses a
curtain design to accommodate non-uniform rack heights
and third party racks. The Flex Cap solution requires a drop
ceiling. If a dropped ceiling is present, this is the simplest
combined solution to deploy.
Most curtain system products require hardware to be
installed. The Flex Cap solution is completely tool-less.
It starts with a small clip that mounts on the drop ceiling
runner. This clip has a small, round ball at the end that slides
into a track on the aluminum extrusion that holds the vinyl
material. Since the ball turns freely in the slot, the extrusion
can be installed at any angle on the drop ceiling. It is not
dependent on running parallel to either the long or the
short runner in a drop ceiling, it can run at an angle.
For fire protection purposes there is a fusible link in the
clip that mounts on the runner. When the room heats up
to 135°F, the fusible line melts and the film along with
the aluminum extrusion drops to the floor allowing the
suppression system to operate fully.
Dome Cap
The Dome Cap ceiling solution is truly unique. Designed
exclusively for a 4’ aisle, the Dome Cap requires a uniform
height of rack heights and two uniform rows of racks to
work. It will work with virtually any rack manufacturer’s
products. This is the easiest ceiling solution to deploy. It can
be used in conjunction with any of the door types to make it
a combined solution.
The Dome Cap consists of an aluminum box header that
straddles the cold aisle with a 20’ length of the same vinyl
film used in the Flex Cap solution. It pulls out the length of
the aisle and is held in place on the edges by a sheet metal
guide.
For fire protection purposes, the Dome Cap also uses
fusible links. The fusible links melt at 135°F, or may be wired
into an audible alarm on the smoke detector. When the
temperature reaches 135°F, or when the alarm sounds,
the link is broken and the film safely retracts into the fire
resistant aluminum header. Guides ensure that the film
retracts smoothly when the fusible links are separated.
19
Ensuring The High Availability Of
Mission-Critical Data And Applications.
Emerson Network Power, a business of Emerson (NYSE:EMR), is the global leader
in enabling Business-Critical Continuity™ from grid to chip for telecommunication
networks, data centers, health care and industrial facilities. Emerson Network Power
provides innovative solutions and expertise in areas including AC and DC power
and precision cooling systems, embedded computing and power, integrated racks
and enclosures, power switching and controls, infrastructure management, and
connectivity. All solutions are supported globally by local Emerson Network Power
service technicians. Liebert AC power, precision cooling and monitoring products
and services from Emerson Network Power deliver Efficiency Without Compromise™
by helping customers optimize their data center infrastructure to reduce costs
and deliver high availability.
Emerson Network Power
Liebert Corporation
World Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
United States Of America
800 877 9222 Phone (U.S. & Canada Only)
614 888 0246 Phone (Outside U.S.)
614 841 6022 FAX
Emerson Network Power
European Headquarters
Via Leonardo Da Vinci 8
Zona Industriale Tognana
35028 Piove Di Sacco (PD)
Italy
39 049 9719 111 Phone
39 049 5841 257 FAX
Emerson Network Power Asia Pacific
29/F, The Orient Square Building
F. Ortigas Jr. Road, Ortigas Center
Pasig City 1605
Philippines
+63 2 687 6615
+63 2 730 9572 FAX
liebert.com
24 x 7 Tech Support
800 222 5877 Phone
614 841 6755 (outside U.S.)
While every precaution has been taken to ensure accuracy and
completeness in this literature, Liebert Corporation assumes
no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.
© 2010 Liebert Corporation. All rights reserved throughout
the world. Specifications subject to change without notice.
All names referred to are trademarks or registered trademarks
of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation.
SL-11388 (R09/10)
Emerson Network Power.
The global leader in enabling Business-Critical Continuity™.
Printed in USA
EmersonNetworkPower.com
AC Power
Embedded Computing
Outside Plant
Racks & Integrated Cabinets
Connectivity
Embedded Power
Power Switching & Controls
Services
DC Power
Infrastructure Management & Monitoring
Precision Cooling
Surge Protection
Business-Critical Continuity, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co.
©2010 Emerson Electric Co.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement