Willmar Spreaders
Willmar Spreaders
Willmar S150
Designed specifically for orchard and
turf use, the dual spinner Willmar
S150 fits the precision pattern needs
of smaller applications. S150
spreader models are finished in a high
performance, chemical resistant
primer with acrylic urethane for
corrosion resistance.
•Dependable ground drive, two speed
conveyor system.
•Curved and cupped stainless steel blades
minimize material pulverization.
•Application rate can be adjusted from less
than 100 pounds per acre to more than one
ton per acre.
•PTO driven dual spinners with four
adjustable blades.
•Material divider delivers fertilizer to
spinners.
•Adjustable baffle plate controls material flow.
•Heavy duty narrow track frame with single axle.
•Manually adjusted metering system.
Willmar S150
Hopper Capacity – Struck
49.6 cu. ft. (1.40 m3)
Hopper Capacity – Heaped
53.6 cu. ft. (1.51 m3)
Weight Empty
1,470 lbs. (688 kg)
Maximum Gross Weight
7,000 lbs. (3,175 kg)
Hopper Construction
409 Stainless Steel
Two Speed Conveyor
The two speed conveyor provides additional
application flexibility so you can set rates
from 39 to 2,612 pounds per acre.
Curved, Cupped Blades
To lessen the dispersion of excess dust and
particles, curved and cupped stainless steel
blades minimize material pulverization.
Conveyor Ground Drive
A mechanically simple chain and gear
conveyor system is directly driven by the
speader’s ground speed through chains and
pulleys. There are no hydraulics or complex
components that can clog up.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-1
Willmar Spreaders
Willmar S500
With multiple wheel track options, the
mid-size five ton Willmar S500 is versatile
enough to adapt to any situation.
Available in 40' or 50' dual spinner, 65'
single spinner, narrow track dual spinner
and narrow track single spinner
configurations.
• Dependable ground drive, two speed conveyor
system.
• Application rate can be adjusted from less than
100 pounds per acre to more than one ton per
acre.
• PTO driven single or dual spinners with four
adjustable curved blades on each.
• Material divider delivers fertilizer to spinners
while adjustable baffle plate controls material
flow.
• Multi-leaf spring suspension with rocker arms
for equal load distribution.
• 62" or 88" axles with 2 or 4 wheel brake options.
• Optional 8 hp Honda gas engine to drive spinner system.
• Optional hydraulic spinners.
• Optional variable rate.
Willmar S500
Two Speed Conveyor
The two speed conveyor allows you to
control application rates in low or
high ranges, from 311 to 1,033
pounds of material per acre.
Metering System
To meter material flow simply move
the hand lever to align with the
corresponding gate opening number.
The stainless steel gate moves freely
without binding or freezing up.
Material Delivery
A front to rear adjustable baffle plate
allows you to determine flow to
accomodate variations in material
density, weight and size.
Hopper Capacity – Struck
152 cu. ft. (4.32 m3)
Hopper Capacity – Heaped
167 cu. ft. (4.73 m3)
Weight Empty
2,150 lbs. (977 kg)
Maximum Gross Weight
14,000 lbs. (6,363 kg)
Hopper Construction
409 Stainless Steel
Conveyor Ground Drive
A mechanically simple chain and gear
conveyor system is directly driven by
the speader’s ground speed through
chains and pulleys. There are no
hydraulics or complex components
that can clog up.
Suspension System
A multi-leaf spring suspension
system positioned on both sides of
each axle provides a reliable method
of equal load distribution.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-2
Willmar Spreaders
Willmar S600 and S800
Sturdy, productive, accurate and reliable,
the Willmar S600 and S800 spreaders are
all that and more. With either a six or eight
ton capacity, you will spend more time in
the field and less time loading. The
spreaders are available in both single and
dual spinner configurations. The S600 is
also available in narrow track with single or
dual spinner.
• Dependable ground drive, two speed conveyor
system.
• 12 gauge 409 stainless steel hopper with
continuous weld construction.
• PTO driven dual spinners with four adjustable
curved blades on each or single with six
adjustable blades.
• Material divider delivers fertilizer to spinners and
an adjustable baffle plate controls material flow.
• Multi-leaf spring suspension with rocker arms for equal load distribution.
• Axle options from 62" to 88" with 2 or 4 wheel brakes.
• 40' pattern dual spinners deliver an 80' swath width.
• 50' pattern dual spinners deliver a 100' swath width.
• Optional hydraulic spinners.
• Optional variable rate.
Willmar S600 or S600NT
Hopper Capacity – Struck
192 cu. ft. (5.46 m3)
Hopper Capacity – Heaped
210 cu. ft. (5.95 m3)
Weight Empty
3,100 lbs. (1,409 kg)
Maximum Gross Weight
16,500 lbs. (8,250 kg)
Hopper Construction
409 Stainless Steel
Two Speed Conveyor
The two speed conveyor allows you to
control application rates in low or
high ranges, from 311 to 1,033
pounds of material per acre.
Conveyor Drive System
A mechanically simple chain and gear
conveyor system is directly driven by
the spreader’s ground speed through
chains and pulleys. A slip clutch
prevents damage to the components
if the conveyor belt unintentionally
stops. Conveyor shields guide the
slackened chain over the cross
members to prevent metal to metal
contact.
High Horsepower PTO Shaft
These spreaders come standard with
540 PTO. High horsepower 540/1000
(shown) or 1000 rpm PTO shafts are
available options.
Taillights
The S600 and S800 are equipped
with lighting and reflective devices
that meet the ASAE S279 lighting and
marking requirements for agricultural
machinery when operated on the
road.
Willmar S800
Hopper Capacity – Struck
244 cu. ft. (6.90 m3)
Hopper Capacity – Heaped
264 cu. ft. (7.47 m3)
Weight Empty
3,400 lbs. (1,542 kg)
Maximum Gross Weight
20,000 lbs. (9,072 kg)
Hopper Construction
409 Stainless Steel
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-3
Willmar Tenders
Willmar Rear Discharge Tenders
Willmar’s truck or trailer mounted 16 ton tenders are ideal for commercial fertilizer dealers, custom
applicators and large farming operations. With two large capacity hoppers that feed into one auger,
these tenders can carry nearly any single, dry material product and load an applicator or planter at up
to two tons per minute.
• 30º minimum hopper slope angle for the 1600 and 40º for the 10 ton model allow for fast material
flow and clean out.
• Standard 10" auger diameter by 21' long.
• Auger on/off controls and raise/lower controls are located on the left rear corner of the tender.
Willmar tenders are manufactured from 409 stainless steel and finished with a special epoxy primer
and modified acrylic urethane paint for maximum corrosion resistance. The rear discharging augers
are also made of 409 stainless steel and coated with the same corrosion resistant finish.
Willmar tenders are manufactured from 409 stainless steel
and finished with a special epoxy primer and modified acrylic
urethane paint for maximum corrosion resistance. The rear
discharging augers are also made of 409 stainless steel and
coated with the same corrosion resistant finish.
Willmar Side Shooter Tenders
When you have a lot of material to move, using the right tender can make all the
difference in your bottom line. Fast and efficient unloading translates into convenience
and profitability in the fertilizer tender business Willmar’s 16 and 24 ton side discharge
tenders move up to two tons of material a minute.
• Steep 40º angle, sloped sides for quick material dispensing.
• 4 or 6 compartment hoppers for multi-product transport options.
• Corrosion resistant primer and finish.
• Hydraulic drive with PTO powered pump and 25 gallon hydraulic oil reservoir.
• Individual hydraulic shut off controls for horizontal and side discharge augers.
• 10" x 17' 409 stainless steel swing away auger (20' on 24 ton model).
• Hydraulic valves control raise/lower, swing and fold/unfold.
Multiple compartments enable simultaneous use of a single tender for seed, blended
fertilizer and micronutrients or a single product. Slide gates on each compartment offer
individual hopper unloading while a bottom dump gate offers pit unloading as well as fast
hopper clean out.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-4
Willmar 1600
Hopper Capacity – Struck
500 cu. ft. (14 m3)
Hopper Capacity – Heaped
560 cu. ft. (16 m3)
Weight Empty
2,720 lbs. (1,235 kg)
Hopper Compartments
2 @ 250 cu. ft. (7.08 m3) each
Hopper Construction
14 gauge 409 Stainless Steel
Willmar 16 Ton Side Shooter
Hopper Capacity – Struck
516 cu. ft. (14.6 m3)
Hopper Capacity – Heaped
570 cu. ft. (16.1 m3)
Weight Empty
4,940 lbs. (2,240 kg)
Hopper Compartments
4 @ 142.5 cu. ft. (4.025 m3)
Hopper Construction
14 gauge 409 Stainless Steel
Willmar 24 Ton Side Shooter
Hopper Capacity – Struck
774 cu. ft. (21.9 m3)
Hopper Capacity – Heaped
885 cu. ft. (24.2 m3)
Weight Empty
7,200 lbs. (3,266 kg)
Hopper Compartments
6 @ 147.5 cu. ft. (4.033 m3)
Hopper Construction
14 gauge 409 Stainless Steel
AGRI-COVER TARPS
AVAILABLE AS ADD
ON OPTION
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-5
Stainless Steel Tube Conveyor for
Willmar Rear Auger 16 Ton Tenders
FEATURES:
• 23' x 8" stainless steel tube with all rubber 12" Chevron belting.
• Slides into auger cavity on 1600 Willmar tenders and most old style 16 ton rear auger
tenders.
• Comes with hydraulic motor on end of tube with hoses to connect to existing hydraulic
connections.
• Support cables included.
• Superior speed and gentle handling make this conveyor a great option for seed or dry
fertilizer.
• OPTION: 10" round discharge spout.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-6
Nurse Boxes
Barber 810
7' 6" x 10 nurse box featuring a side discharge one piece folding auger.
Hopper Dimensions
7' x 10"
Overall Height
70"
Weight (pounds)
2000
Hopper Capacity (cubic feet)
220
Auger Dimensions
8" x 12'
Auguer Discharge Height (from box frame)
7'
Raised Auguer Overhang
4' 9"
Lowered Auger Overhang
4' 4"
Compartments
Double
Hopper Material: 12 gauge mild or 304 stainless steel.
Drive: Truck hydraulics or self contained hydraulic system including 18 HP gas engine, oil tank and battery.
Standard: Vinyl tarp, tarp tie downs, three section stainless steel down spout, stainless steel gates, gate guides, hopper bottom and auger
cleanout gate.
Optional: Tandem axle trailer, roll tarp and ladder.
Barber 1496
Hopper Dimensions
14' x 96"
Overall Height
7' 5"
Approximate Weight (pounds)
3380
Hopper Capacity (cubic feet)
400
Auger Dimensions
10" x 14'
Auguer Discharge Height (from box frame)
7' 6"
Lowered Auguer Overhang
4' 9"
400 cubic foot capacity nurse box featuring a side discharge one piece folding auger.
Hopper Material: 12 gauge mild or 304 stainless steel.
Drive: Truck hydraulics or self contained hydraulic system including overhead valve 25 HP gas engine, oil tank and battery.
Standard: Vinyl tarp, tarp tie downs, fenders, ladder, cleanout gate on auger, three section stainless steel down spout, stainless steel
gates, gate guides and hopper bottom.
Optional: Manual or electric roll tarp.
Barber 1694
16' x 94" side or rear discharge
Side
Rear
Hopper Dimensions
16' x 94"
16' x 94"
Overall Height
7' 7"
7' 7"
Weight (pounds)
4100
4100
Hopper Capacity (cubic feet)
520
520
Auger Dimensions
10" x 18'
10" x 20'
Raised Auger Dischge Ht (from box frame)
10' 6"
9' 9"
Lowered Agr Dischge Ht (from box frame)
N/A
6' 3"
Raised Auguer Overhang
10' x 6"
9' 4"
Lowered Auger Overhang
7' 5"
10' 8"
Hopper Material: 12 gauge mild or 304 stainless steel.
Drive: Truck hydraulics or self contained hydraulic system including 25 HP gas engine, oil tank and battery.
Standard: Vinyl tarp, tarp tie downs, fender on frame mount, ladder, two compartment hopper, three section stainless steel down spoout,
stainless steel gates, gate guides, hopper bottom and auger cleanout gate.
Optional: Manual or electric roll tarp.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-7
Field Loader
Discharge Height: 13' 6"
Overall Length: 35' 2"
Belt Speed: 550 ft. per minute.
Capacity (based on 60 lbs. per
cubic foot): 150 tons per hour.
STANDARD FEATURES:
• 24" wide Crescent top belt with stainless
steel lacing.
• Crowned and lagged drive and idler pull.
• Square tubing style take up assemblies.
• Adjustable discharge chute.
• 2" steel return rollers.
• 1" bearings.
• Direct head drive.
• 20 HP Honda gas engine.
• 6 gallon aluminum gas tank.
• 17 gallon metal hydraulic tank.
• 205/75R 15" tires.
• Tow hitch.
• Factory assembled and tested.
OPTIONAL FEATURES:
• 12" round, fully enclosed discharge spout.
• Stainless steel weather covers.
• Hydraulic power mover.
• 4' adjustable folding hopper.
• 15 HP electric motor driving a hydraulic pump and motor.
• Kubota D722 diesel engine in lieu of 20 HP Honda gas engine.
• Conveyor can be built to run straight off tractor hydraulics. NOTE: This option still includes hydraulic lines and hoses to hydraulic motor.
Also includes flow control to regulate output speed, (deduct the self contained hydraulic system).
Belt Loader 2435
Directional Flow Belt Loader
Barber 2435
Discharge Height
13'
Overall Length
35'
Tongue Weight
70 lbs.
Belt
24" Z-top
Belt Speed
0-730 FPM
Hopper Material: 10 gauge mild or 304 stainless steel.
Drive: Self contained hydraulic system including 20 HP gas engine, oil tank and battery.
Standard: Hopper adapters, powder coat finish, crowned and vulcanized frive pulley, stainless steel deflector, safety chains for towing,
removable six gallon fuel tank with gague, stainless steel belt lacing, oil drip channels and clevis hitch.
Optional: Steerable hydraulic wheel drive, stainless steel cover for incline section, ball hitch, elephant spout and longer top section.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-8
Spreaders
AGRI-COVER TARPS
AVAILABLE AS ADD
ON OPTION
6 TON SPREADER FEATURES:
• 14 gauge 304 stainless steel hopper construction.
• Includes front window in hopper.
• 2" x 6" tubing frame.
• Bolt on box to frame feature allows easy hopper removal from frame.
• Heavy duty adjustable hitch.
• Heavy duty 4" x 4" tongue jack 12000 lb.
• Tandem 8000 lb. torsion style axles with 8 bolt hubs.
• 14L x 16.1 high speed implement rib tires.
• 1" x 1" mesh type heavy duty 8" conveyor chain.
• Twin dish type spinners 20 5/16" diameter with 4 adjustable stainless steel blades, standard 50'
spread pattern.
• Includes hydraulic cylinder to engage metal, turn clean style press wheel.
• Running gear of spreader is metal shot blasted and coated bright blue for unmatched corrosion
resistance.
8 TON SPREADER FEATURES:
• Heavy duty 304 stainless steel hopper construction.
• Includes front window in hopper.
• Bolt on box to frame feature allows easy hopper removal from frame.
• Tandem 10000 lb. torsion style axles with 8 bolt hubs.
• 19L x 16.1 tires.
• 1" x 1" mesh type heavy duty 304 stainless steel conveyor chain, 8" wide.
• Conveyor is driven by press wheel, engaged and disengaged with a hydraulic cylinder connected
to the tractor.
• Utilizes two sets of sprockets for conveyor rates.
• Includes stainless steel adjustable material divider for proper material placement on spinners to
insure uniform spread pattern at all application rates.
• Hydraulically driven twin dish type spinners, 24" diameter with 4 blades per spinner, standard 60'
spread pattern.
• Tandem 10k highway axles.
• Heavy duty 4" x 4" tongue jack.
8 TON COMBINATION LIME AND FERTILIZER SPREADER FEATURES:
• Heavy duty 304 stainless steel hopper construction.
• Includes front window in hopper.
• Bolt on box to frame feature allows easy hopper removal from frame.
• Heavy duty 4" x 4" tonge jack, 12000 lb.
• Tandem 10000 lb. torsion style axles with 8 bolt hubs.
• 19L x 16.1 tires.
• 1" x 1" mesh type heavy duty 304 stainless steel conveyor chain, 20" wide.
• Conveyor is driven by press wheel, engaged and disengaged with a hydraulic cylinder
connected to the tractor.
• Utilizes two sets of sprockets for conveyor rates.
• Includes stainless steel adjustable material divider for proper aterial placement on
spinners to insure uniform spread pattern at all application rates.
• Hydraulically driven twin dish type spinners, 24" diameter with 4 blades per spinner.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-9
AGRI-COVER TARPS
AVAILABLE AS ADD
ON OPTION
Tenders
10 TON REAR DISCHARGE TENDER:
• 12 gauge 304 stainless steel.
• Two 165 cubic foot compartments.
• 10" x 12 gauge 304 stainless steel auger tube, augers with 304
stainless steel flighting and mild steel pipe.
• Heavy duty 304 stainless steel square tubing main frame.
• 1.75 ton per minute discharge rate.
• Stainless steel manually operated slide gates.
• Tender with front and rear ladder.
• 20' hydraulically raised and lowered discharge auger with 14'
discharge height.
• Stainless steel trailer fenders with Doyle mud flaps.
• 18.5 gallon hydraulic tank with termperature gauge, site glass,
and large hydraulic filters, metal shot blasted and powder coated
bright blue.
• Hydraulic pump, cylinders, lines, hoses and fittings.
• Roll tarp with stainless steel end caps.
• DOT approved lights, tail and marker.
• Factory assembled and tested.
16 TON REAR DISCHARGE TENDER:
• 12 gauge 304 stainless steel.
• Two 241 cubic foot compartments.
• 10" x 12 gauge 304 stainless steel auger tube, augers with 304
stainless steel flighting and mild steel pipe.
• Heavy duty 304 stainless steel square tubing main frame.
• 1.75 ton per minute discharge rate.
• Stainless steel manually operated slide gates.
• Tender with front and rear ladder.
• 20' hydraulically raised and lowered discharge auger with 14'
discharge height.
• Stainless steel trailer fenders with Doyle mud flaps.
• 18.5 gallon hydraulic tank with termperature gauge, site glass,
and large hydraulic filters, metal shot blasted and powder coated
bright blue.
• Hydraulic pump, cylinders, lines, hoses and fittings.
• Roll tarp with stainless steel end caps.
• DOT approved lights, tail and marker.
• Factory assembled and tested.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-10
Tenders
16 TON SIDE DISCHARGE TENDER:
• 12 gauge 304 stainless steel.
• Four 129 cubic foot compartments.
• 40º side slope on hopper.
• 10" x 12 gauge 304 stainless steel auger tube, augers with 304
stainless steel flighting and mild steel pipe.
• Heavy duty 304 stainless steel square tubing main frame with
mild steel boxed support arm and cross braces.
• 1.75 ton per minute discharge rate.
• Stainless steel manually operated slide gates.
• Tender with front and rear ladder.
• 19' hydraulically raised and lowered discharge auger with 14'
discharge height.
• Stainless steel trailer fenders with Doyle mud flaps.
• 18.5 gallon hydraulic tank with termperature gauge, site glass,
and large hydraulic filters, metal shot blasted and powder coated
bright blue.
• Hydraulic pump, cylinders, lines, hoses and fittings.
• Roll tarp with stainless steel end caps.
• DOT approved lights, tail and marker.
• Factory assembled and tested.
24 TON SIDE DISCHARGE TRAILER TENDER:
• 12 gauge 304 stainless steel.
• Three 258 cubic foot compartments.
• 40º side slope on hopper.
• 10" x 12 gauge 304 stainless steel auger tube, augers with
stainless steel flighting.
• Heavy duty mild steel square tubing main frame with mild steel
boxed support arm and cross braces.
• 1.75 ton per minute discharge rate.
• Stainless steel manually operated slide gates.
• Tender with rear ladder.
• 20' hydraulically raised and lowered discharge auger with 16'
discharge height.
• Stainless steel trailer fenders with Doyle mud flaps.
• Kabota 66 HP, 4 cylinder, water cooled diesel engine.
• 22 gallon steel diesel tank, metal shot blasted and powder
coated safety yellow.
• 52 gallon hydraulic tank with termperature gauge, site glass,
and large hydraulic filters, metal shot blasted and powder coated
Doyle green.
• Tandem hydraulic pump.
• Roll tarp with stainless steel end caps.
• 14" 43 lb. dual certified wide flange beam main frame.
• 2 speed landing gear, rated at 50000 lbs. of lift.
• New Hutch 9700 under slung suspension with 3 leaf high arch
spring suspension.
• Rockwell 25000 lb. outboard drums and 16.5" x 7" air brakes.
• 22.5 ten hole Hubpilot.
• 255/70R22.5 16-ply radial tires.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-11
“EZ-VEYOR” Merritt 38 1/2' Multi-Purpose
Conveyor Trailer for Fertilizer, Seed or Grain
Dimensions: 38' 6" Heritage
Horizontal conveyor can be reversed to allow the product to
unload off the front.
OPTIONS:
• 38 HP power pack.
Length:
38' 6"
Width:
96"
Side Wall Height:
68"
Number of Hoppers:
2
Hopper Clearance Empty:
25"
Cubic Capacity (Heaped):
1,323
Heaped Bushels (Approximate):
1,053
Swing Clearance:
115 13/16"
King Pin Setting:
18"
Hopper Slope (Side):
40º
Upper Slope:
33 1/2º
Estimated Weight:
8,600 lbs.*
* With eight 10 hole uni-mounted steel wheels and 8.25" x 22.5"
tires.
• Split third compartment.
• Air ride suspension.
In-Line Gas Springs
Elastic Bumpers
Easy Operational Controls
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-12
Features:
Use any truck with the OPTIONAL 38 hp power
pack. It can also be removed for grain hauling.
Four large sight windows on driver’s side
positioned above doors.
• Sloping ends make easier access to platforms.
• 116" of swing clearance provides greater tractor maneuverability and better load
transfer capability.
• 36' interior bridge potential, allowing for 80,000 lb. gross when coupled to a
tractor with a 206" or greater wheel base.
• The strongest aluminum design – Merritt’s heavy duty posts riveted (not welded)
to 0.63 side sheets.
• Easy opening doors – fully opened or closed in fewer than four revolutions.
• 68" sides for increased capacity.
• Ground clearance of 25", great for ag use and swing-away augers.
• Hoppers are .125" thick material with vertical stiffeners.
• White aluminum .063" baked enamel finish.
• Corrosion resistant mylar barrier separates all aluminum from contact with steel.
• Merritor Wabco premium ABS 4S-2M.
• Sealed wiring harness with internal grounding.
• Two rows of three lights per side.
• 22,500 lb. axles, 5" round with automatic slack adjusters.
• Single leaf springs.
• 27' x 18" stainless steel incline conveyor with stainless steel skirting, hydraulic
motor and lift cylinder. Travel height: 10' 10" Discharge height: 14' 6"
• 17' x 17" stainless steel horizontal conveyor with stainless steel skirting and
hydraulic motor.
• Agri-Cover AutoLock electric roll tarp with 7" aluminum end caps.
• Elastic bumpers installed under conveyor so there is no metal on metal.
• In-line gas springs installed on the incline conveyor support cables to help
support the conveyor.
• 11" ground clearance at lowest point.
Merritt’s FLO-THRU lap seamed corners allow
the product to funnel out cleanly and
completely every load. No cross bracing inside.
New, stronger top rail.
17" conveyor feeding a 18" incline conveyor
allowing a smooth transition.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-13
Waconia Manufacturing
Waconia Towers
At Waconia Manufacturing they know that
every operation is unique. That is why it is
so critical to select the right blending
equipment designed for your plant’s layout,
volume, regulatory concerns and more.
Their unmatched expertise in the use and
application of various blending equipment
partnered with their understanding of your
individual needs leaves you with the ideal
operating solution for your facility.
• Provide speed, capacity and
accountability that is unmatched.
• Overhead storage from 90 to 300 tons.
• From four to 14 separate bins.
• Throughput range is 60 to 250 TPH.
• Single and double blender designs.
• Controls can be mounted at a remote site
up to 200' away.
• Manual or totally computerized.
TA Series Tapered Auger Vertical Blender
The Waconia TA Series vertical blenders have a tapered blending auger that
quickly, yet gently, draws material from the payload hopper into the blending
drum. Once inside, material is constantly blending as it moves up the center
and down the sides. A complete blend cycle takes only seconds and blend
quality is excellent.
The scale and blender on each Waconia unit are factory tested and shipped
fully assembled. The only on site assembly required is the unit’s bolt on
hopper. A 3/4" stainless steel spray ring for impregnation comes standard
with each unit.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-14
Whether you are building a new plant or improving an existing facility...whether you
need a floor system or a tower system...rest assured you have come to the right
place! No matter what your needs, you simply will not find more skilled people to
design, build, install and support your dry fertilizer blending equipment than the
experienced team behind Waconia Manufacturing.
Rotary Blender
• 6, 8 and 10 ton capacities.
• 3 7/16" drive shaft intrudes a full 6" inside the blending drum where it is welded to a 30" diameter
domed cap.
• 3 1/2" tri-rollers provide less conveyor belt resistance which requires less horsepower and makes
for less wear.
• Crowned trunion wheel distributes weight evenly across the surface for longer life and less wear.
• Weigh hopper is equipped with a modern knife and pivot pipe lever scale system for more durability
and greater calibration accuracy.
• Drum drive sprocket features bolted construction for quick and easy replacement in the field.
• Smallest overall footprint in the industry and fast load out rates.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-15
Agri-Cover Tarps
SRT-2 Spool Roll Tarp
SRT-2 Electric Tarp
• Fast and easy installation.
• Arched 12" stainless steel end caps, stainless
steel bows and ridge strap are standard (as
pictured).
• Zinc plated steel components.
• The tarp is made of heavy duty double coated
fabric.
• Tarp color available in assorted colors
(standard color is black).
• Enjoy the convenience and safety of the
SRT-2 electric from your own cab.
• With the touch of a cab mounted switch, the
SRT-2 electric operates smoothly and quietly,
opening to any position desired and closing
securely.
• The tarp remains secure during rolling
operation, even in windy conditions.
• Excellent quality, very dependable, fast,
attractive and economical to own.
• Opens and closes with the push of a button – easy for anyone to operate.
• Self tensions every time it is closed – no need for you to ever adjust the tension.
• Increased daily production by tarping on the go at low speeds.
• No need to climb in and out of the cab.
• A roll return at each end maintains a tight and even roll when opening and closing.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-16
Premium Electric Tarp Conversion
Tarp, Meet Motor:
Convert your side locking tarp
system into electric with the
ROLTEC™ Electric Tarp
Conversion.
• Makes tarping easy.
• Saves time and money.
• Safer operation.
• No adjusting needed.
Pre-assembled and UPS-able for
efficient shipping and install!
Front and Rear Telescoping Arms
• Aircraft aluminum upper and steel lower arm.
• No elbows or joints to break.
• Synchronized motion for reduced wind interference.
• Internally lined for smooth slide action.
• Wiring runs through the arm with no pinch points.
HD Universal Mounting System
• Adjustable angle fits most makes and models of trailers,
including sloped end trailers, without modification.
• Structurally engineered mount made out of durable aluminum.
• Pre-drilled hole pattern matches trailer rib and rivet spacing.
• Dual pole connector (female) attaches to mount system.
Spring Tension Adjustment
• 4 springs that create positive return tension.
• Tension throughout entire return cycle including locking.
• Works in moderate wind conditions.
High Output Motor
• Powerful and fast with a 194 gear ratio.
• All metal gear housing will not crack.
• Gear break does not freeze.
• Open and close the system from the truck cab.
• All electrical components needed for installation are included.
Double Pin Motor Connection
• Motor drive can be released with one pin.
• Motor stays secured on roll tube, no need to remove.
• Exposed spline for manual cranking.
PRE-ASSEMBLED FOR EASY INSTALL AND PACKAGED FOR EFFICIENT SHIPPING
BRING OUT THE BEST IN YOUR TARP:
Upgrade option available
ROLTEC™ ELECTRIC TARP CONVERSION
PRE-ASSEMBLED PARTS
ITEM
DESCRIPTION
1
Front telescoping pivot arm with gear box and motor,
wired and ready to install.
2
Rear telescoping pivot arm, assembly ready to install.
3
Roll tube extension adaptor.
4
HD universal front mount and rear pivot mount.
5
Dual pole plug connector wired to heavy duty 6 gauge
wire.
6
Electrical components and hardware.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-17
Super Tender
The Super Tender is unmatched in versatility and durability when stacked against the rest. The Super Tender utilizes a hydraulic belt system that can unload
26 tons of seed/fertilizer in minutes. In one hour, this versatile trailer can be converted into a standard conventional grain trailer, by removing the hydraulic
belt system. This trailer improves efficiency, eliminates many seasonal tenders, and gives a much higher return on equipment investment dollars.
THE MOST VERSATILE HOPPER FROM START TO FINISH
STANDARD SPECIFICATIONS TIMPTE BELT SYSTEM FOR TIMPTE 40' x 72" x 96"
TRAILER STANDARD FEATURES
Air Ride Suspension
Double Wall Construction
4 Wheel ABS Brakes
11R x 22.5 Tires
No Lube Landing Gear
Air Scale
For increased flow end slope sheets are stood up to
45 degrees.
Front Ladder
2 Rows of 3 Lights
24" W x 37" L Openings
Formed Ag Tub
18 oz. All Heat Welded Tarp
Thunder 5000 Power Tarp with One Touch
Stainless Steel Hopper Corners
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-18
8 Ton Fertilizer Spreader
NEW
FS800 FEATURES:
SPREAD PATTERN - Dual 50' spinners deliver a total spread pattern of 100' using a 100% overlapping triangular pattern.
WIDER LEAF SPRINGS - Heavy duty 2.5" wide leaf springs, lower stress on leaf spring and improved ride quality. Walking suspension great for rough and
uneven terrain.
ADJUSTABLE HEIGHT HITCH - Moveable clevis to accommodate wider range of drawbar height and allows for leveling of spreader.
INTEGRAL HITCH - Hitch is integral to frame. Suspension pulls from hitch lowering stresses on frame.
MECHANICAL APRON DRIVE - Positive mechanically driven from wheel. Friction drive wheels slip when tire surface is wet (common when dew is present).
SINGLE BEARING DESIGN - One bearing part number for all driveline components on the machine.
SPLIT SPROCKET DESIGN - Allows for easy in-field replacement of worn sprockets without removal of wheel.
INTEGRAL LIGHTS - Sealed and rubber isolated lights tucked neatly and cleanly inside frame. Compliant with ASABE standard, common 4" lamp to on highway truck market.
OBSTRUCTION FREE INTERIOR - Clean hopper, no internal gussets/plates to catch fertilizer.
MINIMAL FLAT SURFACES - flat surfaces minimized to prevent fertilizer build up, extending machine life.
SPECIFICATIONS:
SPREAD PATTERN
50'
HOPPER CAPACITY - STRUCK
241 cubic feet
HOPPER CAPACITY - HEAPED
266 cubic feet
WEIGHT - EMPTY
4,000 lbs.
MAX GROSS WEIGHT
20,000 lbs.
OVERALL LENGTH
216 inches
OVERALL WIDTH
92 inches
OVERALL HEIGHT
92 inches
HOPPER LENGTH
120 inches
HOPPER WIDTH
92 inches
HOPPER HEIGHT
54 inches
AXLES/SUSPENSION
Walking tandem 10,000 lb. axles, 2.5" wide leaf springs
FRAME
6" x 2" x 1/4" rectangular tubing
HITCH
1/4", hot rolled sheet, channel formed
DRAWBAR
Bolt in, adjustable position
HOPPER
12 gauge, 409 stainless steel
SKID
12 gauge, 409 stainless steel
GATE
7 gauge, 409 stainless steel
Conveyor Chain
7" wide, 304 stainless steel with 1" x 1" mesh
TIRE SIZE
19L x 16.1 12-Ply
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-19
Mobility C400 Lime and Fertilizer
Combination Spreader
C SERIES FEATURES:
CAPACITY (volume): 400 cu. ft.
CAPACITY (weight): 12 Tons
OVERALL LENGTH: 270"
OVERALL WIDTH: 154.5"
OVERALL HEIGHT: 119"
HOPPER LENGTH: 160"
HOPPER WIDTH: 96"
CONSTRUCTION (hopper): 409 SS
CONSTRUCTION (frame): 8 x 2 rect. tube
METERING GATE: Adjustable
AXLE: Single
WHEELS: 25 x 36
TIRES: 66 x 4300R25
BRAKING SYSTEM: N/A
CONVEYOR: 20" SS Mesh
CONVEYOR DRIVE: Hydraulic
CONVEYOR RATE: Variable
SPINNERS: 24"
SPINNER DRIVE: Hydraulic
SPREAD COVERAGE: 80' Fertilizer
CONTROL SYSTEM: Raven
TONGUE/HITCH: Adj. Clevis or Pintle
JACK: 12K
LIGHTING: Optional
SCALE SYSTEM: Optional
ROLL TARP: Optional
STANDARD COLORS: White
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-20
DA100 1 Ton Spreader
409 STAINLESS STEEL
MOBILITY
BY DALTON AG
GREAT FOR USE IN:
VINEYARDS
SMALL ACREAGES
SPECIFICATIONS:
OVERALL LENGTH: 137"
OVERALL HEIGHT: 66"
(Including Tarp Bow)
OVERALL WIDTH: 68"
HOPPER CAPACITY: 35 cu. ft.
HOPPER LENGTH: 72"
HOPPER WIDTH: 45 1/2"
WEIGHT: 1320 lbs.
WHEEL TRACK: 55 1/2"
TIRES: 11L x 15 10-PLY
2 SPEED DRIVE
DEFLECTOR SHIELD
FITTED TARP
540 PTO
5,000 lb. JACK
SPINNER BUMPER
ORCHARDS
GOLF COURSES
TURF/LAWN CARE
FOOD PLOTS
OPTIONS:
STAINLESS STEEL BANDER
HYDRAULIC ON/OFF
HOPPER EXTENSION TO 1.5 TON (50 cu. ft.)
ENGINE DRIVE
VARIABLE RATE
HYDRAULIC SPINNERS
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-21
Mobility Row Crop Spreaders
MOBILITY 600
MOBILITY 800
NOW
AVAILABLE WITH
OPTIONAL RAVEN
AUTOMATIC RATE
CONTROLLER
MOBILITY SPREADER FEATURES:
• Box material and gussets all stainless steel above the frame.
• Safety guard around fans.
• Adjustable single axle – 78" to 120".
• Hitch with heavy duty adjustable clevis.
• 540/1000 PTO dual drive system.
• Safety chain.
• The two speed conveyor drive system allows for a wide range of
• 5000 pound swivel jack.
application rates.
• Ground clearance 40" under spinners and 47" under frame.
• Dual spinner bolt on blades.
• Agri-Cover SRT manual roll tarp.
MOBILITY 600 SPECIFICATIONS:
MOBILITY 800 SPECIFICATIONS:
• 200 cubic foot capacity.
• 270 cubic foot capacity.
• Heavy duty 8 bolt hubs with 3" spindles.
• Sight window in front of hopper.
• 12.4 x 42" tires.
• Hydraulic on/off for conveyor drive.
• Overall height: 112"
• Heavy duty 10 bolt hubs with 3 1/2" spindles.
• Overall length: 203"
• 14.9 x 46" tires.
• Overall height: 116"
• Overall length: 215"
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-22
Side Dress Equipment
DLQHD Liquid Applicator
20" colter
injection
with straight
stream
nozzle and
stainless
steel nipple
injects the
fertilizer
directly
behind the
colter.
The spring
loaded
ground driven
pump is
mounted on
the front bar
for better
visibility and
automatically
stops when
the toolbar is
lifted for
turnaround.
High clearance
46" lug tires
with heavy 8
bolt hubs give
you maximum
crop clearance.
The DLQHD Series Liquid Applicator is built tuff for the most rugged terrain. The 4 x 6
tubular main frame and the 4 x 6 front mount toolbar give you the strength and the visibility
you need in today’s environment.
This unit features the versatility of handling a 27' to 42' toolbar and 15" to 36" row spacing.
The ground driven pump and drive system include a 15" bar lug shur grip tire and stainless
steel drive chain.
Optional single or twin piston pump gives you a large range of application rates. The colter
injection equipped with straight stream nozzle applies the fertilizer where needed.
D3000 Series Toolbar – 3 Point
The D3000 Series Toolbar is built to meet
individual needs. Front to back rank is 30",
which is the widest in the industry. Heavy
construction of 6 x 4 rectangular tube gives
you the strength you need in today's
environment.
This unit features the versatility of handling
15" to 36" row spacing. It has extra long wing
lift cylinder slots so that the wings can follow
contour of ground. Also with removable spacers to adjust wing flex. Hydraulic folding wings fold over 45 degrees and gives you more road
transport clearance.
3 Point Hook Up
Pull Out and Swing Away Hitch
Disc Sealers and Colter Options
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-23
Articulating Loaders
STANDARD EQUIPMENT: WL32
WL32
Articulated wheel loader offers power and
performance.
The WL32 is equipped with a powerful Perkins 4
cylinder, Tier IV Final diesel engine that delivers
high performance. Available with either a 48 HP
or 60 HP engine designed for maximum
efficiency. This articulating wheel loader
features a modern cab design ensuring
panoramic
visibility
with
excellent
headroom and freedom of movement. With the
universal attachment plate, faster hydraulic
block and 14 pin auxiliary electrical harness all
standard, operating attachments is quick and
easy.
• Perkins 4 cylinder, 4 stroke, diesel engine (48 HP or 60 HP optional).
• Tier 4 Final compliant.
• ROPS and level 1 FOPS compliant.
• Hydrostatic four wheel drive.
• Two speed transmission.
• Brake inching pedal.
• 17 gpm auxiliary hydraulic flow (48 HP engine)/26 gpm high flow (60 HP engine).
• Maximum travel speed 12.4 mph.
• Articulated steering angle ± 45º.
• Oscillation angle ± 12º.
• Planetary axle, transfer case and drive shaft.
• Tires 31 x 15.5 15EM ET-37.
• Central service and parking brake.• 100% differential lock.
• Battery disconnection switch.
• Hydraulic assisted side tilting canopy/cab.
• Front auxiliary hydraulics with faster quick connect coupler.
• Hydraulic universal style skid steer quick hitch system for attachments.
• Adjustable steering wheel.
• Joystick with directional control switch and integrated differential lock button.
• Front head lights.
• Front and rear working lights.
• Brake and directional turn signal lights.
• Back up alarm.
• Float circuit on lift arm.
• Adjustable spring suspension cloth comfort seat with seat belt.
STANDARD EQUIPMENT: WL34
WL34
Articulated wheel loader offers optimum
power and fuel economy.
The WL34 is equipped with a powerful 48 HP
Perkins T4F diesel engine. With the universal
attachment plate, faster hydraulic block, and 14
pin auxiliary electrical harness all standard,
operating attachments is quick and easy. The
operator station is ergonomically laid out for
comfort and convenience. The ergonomically
designed multifunctional joystick with integrated
auxiliary controls allows for easy attachment
operation. Excellent 360º visibility, especially in
confined areas.
• Standard auxiliary hydraulic flow of 16 gpm.
• Hydrostatic all wheel drive.
• Planetary axle PA1200; PTO gear and joint shaft.
• 15.5/55-18 EM ETO.
• Central driving and parking brake.
• 100% differential lock.
• Air filter with integrated safety catridge.
• Battery circuit breaker.
• 35.7 kW/49 HP Perkins Tier IV Final diesel engine.
• Faster quick release couplers with 14 pin auxiliary electric connection.
• Hydraulically activated quick change system for attachments.
• Hydraulic articulated pendulum steering, 12º pendulum angle.
• Diver cabin/canopy with front and rear window, roll-over protective structure/FOPS tested.
• Adjustable steering column.
• Joystick with motion direction control and interated touch button for differential lock.
• Lighting display according to StVZO Road Traffic Licensing Regulations; certified for driving on
public roads.
• Reversing warning device (acoustic).
• Factory installed heat and air conditioning.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-24
Articulating Loaders
STANDARD EQUIPMENT: WL38
WL38
Articulated wheel loader offers power and
performance.
The extremely compact yet powerful WL38
wheel loader is an excellent choice for any
jobsite. It is equipped with a 74 HP turbo
charged Deutz Tier 4 Final diesel engine
allowing the machine to achieve top speeds of
19 mph. With a standard auxiliary hydraulic flow
of 18 gpm and high flow of 33 gpm, this is the
perfect machine for a variety of jobs. The
operator station is ergonomically laid out for the
comfort and convenience of the operator.
Operating elements including a multifunctional
single lever control and an additional lever for
the third control circuit are conveniently
arranged for easy operation.
• Turbo charged, Tier IV Final liquid cooled Deutz diesel engine, model TCD 2.9 L4.
• 4 cylinder, 177 in3.
• Operating power: 74.5 (55 kW) at 2,300 rpm.
• Maximum speed: 18.6 mph with 2 speed select.
• Ride control - load swing dampending 100% on demand differential lock.
• Back up alarm.
• Adjustable steering column.
• Adjustable suspension comfort seat with safety belt.
• Air conditioning and heat, 2 doors.
• Foldable rearview mirrors, right and left.
• 2 front headlights for driving.
• 2 front working lights and 2 rear working lights.
• Complies with ROPS and FOPS regulations.
• Pre-wired for radio.
• Hydrostatic automotive 4 wheel drive.
• Brake inching pedal.
• Joystick control, forward/reverse/neutral.
• 3rd control circuit standard.
• Universal style hydraulic skid steer quick hitch.
• Auxiliary hydraulics: 16.9 gal/min or 31 gal/min.
• 14 pin wiring harness for controlling attachments.
• Faster hydraulic block for quick changing of attachments.
• 1 float position.
• 15.5/55-18EM ET 0 tires.
STANDARD EQUIPMENT: WL52
• Turbo charged, Tier IV Final liquid cooled Deutz diesel engine, model TCD 2.9 L4.
• 4 cylinder, 177 in3.
• Operating power: 74.5 (55 kW) at 2,300 rpm.
• Maximum speed: 12.4 mph with 2 speed select, optional 18.6 mph.
• Ride control - load swing dampending (available with 18.6 mph models only).
• 100% on demand differential lock.
• Back up alarm.
• Adjustable steering column.
• Adjustable suspension comfort seat with safety belt.
• Air conditioning and heat, 2 doors.
• Foldable rearview mirrors, right and left.
• 2 front headlights for driving.
• 2 front working lights and 2 rear working lights.
• Complies with ROPS and FOPS regulations.
• Pre-wired for radio.
• Hydrostatic automotive 4 wheel drive.
• Brake inching pedal.
• Joystick control, forward/reverse/neutral.
• 3rd control circuit standard.
• Universal style hydraulic skid steer quick hitch.
• Auxiliary hydraulics: 16.9 gal/min or 31 gal/min.
• 14 pin wiring harness for controlling attachments.
• Faster hydraulic block for quick changing of attachments.
• 1 float position.
• 405/78R18 tires.
WL52
Versatility, power and performance.
The WL52 articulated wheel loader is the ideal
machine for a variety of jobs. It is equipped with
a 74 HP tubo charged Deutz T4F diesel engine.
With standard auxiliary hydraulic flow of 18 gpm
and high flow of 33 gpm (optional) allows for
operation of high performance attachments.
With travel speeds up to 19 mph, getting around
the jobsite is extremely efficient. The operator
station is ergonomically laid out for the comfort
and convenience of the operator, reducing
fatigue and increasing productivity. Operating
elements including a multifunctional single lever
control and an additional lever for the third
control circuit, are conveniently arranged for
easy operation.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-25
Articulating Loaders
STANDARD EQUIPMENT: WL60
WL60
The WL60, with its 101 HP Perkins T4i engine,
offers the speed and payload to handle nearly
any jobsite it faces. With the universal hydraulic
attachment plate and standard auxiliary
hydraulic flow of 26 gpm (40 gpm optional),
changing and operating existing or new
attachments is quick and easy. A class leading
bucket pin height of 12' means dumping over
high side trucks is no longer an issue. The
spacious climate controlled cab features
impressive 360º visibility along with
ergonomically designed joysticks and controls to
maximize operator comfort.
• Perkins 4 cylinder, 4 stroke, turbo charged diesel engine.
• Tier 4 interim compliant.
• ROPS and FOPS compliant.
• Hydrostatic four wheel drive.
WL60T
• Two speed transmission.
AVAILABLE WITH
• Brake inching pedal.
TELESCOPING
• Maximum travel speed 12.4 mph, 19 mph optional.
• Articulated steering angle ± 45º.
ARMS
• Oscillation angle ± 12º.
• Planetary axle, transfer case and drive shaft.
• 402/70R18 tires.
• Central service and parking brake.
• 100% differential lock.
• Battery disconnection switch.
• Vibration isolated cab.
• 2 entry/exit doors.
• Heat and air conditioning.
• Hydraulic assisted side tilting cab.
• Front auxiliary hydraulics with flat face couplers.
• Universal skid steer attachement plate.
• Ajustable steering wheel.
• Joystick with electronic control, direction control switch and integrated differential lock button.
• Front head lights.
• Front and rear work lights.
• Brake and directional turn signal lights.
• Back up alarm.
• Float circuit on lift arm.
• Adjustable spring suspension cloth comfort seat with seat belt.
STANDARD EQUIPMENT: SW28
SW28
The SW28 brings maximum reach making it
ideal for loading and unloading. The SW28
delivers 2,800 pounds of rated operating
capacity at 50% and a lift height up to 134
inches. The machine is equipped with a 74.3 HP
turbo charged Perkins Tier IV Final engine.
Available in both H-pattern and ISO joystick pilot
controls, the machine can fit the preferences of
any user. The ergonomically designed controls
and pressurized cab delivers comfort and
visibility, reducing operator fatigue, increasing
productivity.
• Vertical lift arm.
• Perkins 4 stroke, 74.3 HP turbo charged diesel engine, Tier 4 Final compliant.
• 12" x 16.5" all-terrain tires.
• Rexroth hydrostatic pump and drive motor.
• Available in H-pattern or ISO controls joystick pilot controls.
• 2 speed transmission with top speed of 4.3 mph (low) and 8.7 mph (high).
• Spring applied, hydraulic released wet disc parking brakes.
• Hydraulic universal skid steer quick hitch system for attachments.
• Font auxiliary hydraulics with flat face couplers.
• Arm float position.
• Adjustable spring suspension comfort seat with seat belt.
• Foot and manual throttle.
• Ront and rear work lights.
• ROPS Level I compliant canopy.
• Lexan safety roof.
• Back up alarm.
• 12 volt power accessory.
• Seat belt.
• Isolated pressurized cab.*
• Automotive style HVAC system.*
• Easy to access side windows.*
• Radio ready.
* Available on cab units only.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-26
Equipment
STANDARD EQUIPMENT: TH522
TH522
Combines power and maneuverability.
The comfortable telehandler TH522 convinces
with a perfect combination of poerful engine
output and a high level of maneuverability.
Thanks to the all wheel steering and the
compact design, the TH522 is skillfully small
stacking and trasport work can therefore be
managed quickly and safely, even in a small
space. Equipped with sensitive work hydraulics
and a hydrostatic drive as a standard, the TH522
allows for extremel recise maneuvering.
• Hydrostatic all wheel drive.
• Planetary steering axle PAL 1530, 16º swing angle on rear axle.
• 10.5/80-18 AS ET0
• Central driving and parking brake.
• Perkins diesel engine 404D-22 36.3 kW, 49 HP.
• 3rd control circuit in front proportionally via joystick.
• Cabin roll over protective structure/FOPS tested.
• Comfort seat with seat belt.
• Hydraulically pilot operated joystick with proportional telescoping function and travel direction selector switch.
• Operating hour meter.
• Fuel gauge.
• 2 front working lights, 2 rear working lights.
• Lighting display according to StVZO Road Traffic Licensing Regulations for driving on public roads.
• Hydraulic quick change system for attachments.
The vertical lift system allows for a fluid working principle and in a complex operating environment it
supports work by means of a partially automated telescopic movement. Due to the nearly vertical
lifting or lowering movement, the stability of the machine is improved. The continuous working
principle, the avoidance of a reduced lowering speed for safety reasons and also the facilitated
machine operation increase the machine handling capacity. Due to the hydraulic serial circuitry, the
operating speed is even noticeably increased without having to install more hydraulic power output into
the machine. Experienced operators can work more quickly and safely with the vertical lift system.
Inexperienced operators gain valuable support in lifting and loading operations.
Wacker Neuson All Wheel Steer Wheel Loaders
750T • 850 • 1150
The all wheel steer wheel loaders of the 50 series have a
particular talent for honing in on the essentials. They are
straight forward, uncomplicated and lightweight. They are
compact in design, precisely focused and always come
equipped with tried and tested components and the
backing of a wealth of experience. With natural talent,
results you can count on will come more quickly. An added
benefit when you have neither time nor money to waste.
The 50 series all wheel steer wheel loaders from Wacker
Neuson are compact and consume less fuel while being
able to offer you more. They are up to 2,200 lbs. lighter
than comparable models. Their four wheel drive and easy
operation makes them agile and stable, and they are
manufactured in one of the most up to date production
plants. They are masterpieces of design, and are the all
around vehicle of choice for customers, for the
environment and for our common future. They have a
natural talent for efficiency and sustainability.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-27
Convey-All Fertilizer/Seed Tenders
BTS-295 Fertilizer/Seed Tender
• Fast and effortless – no more handling bags.
• Conveyor load out, use with any seed.
• Ideal size for most large planters.
• Conveyor can be transported front or rear.
The BTS-295 is built for productivity and features conveyor load out. The conveyor ensures gentle handling so there is no seed damage,
even with delicate, extra dry seed. It can also be used for granular herbicide and fertilizer. You don’t have to back up to fill most planters.
Simply pull along side the rear of the planter, the conveyor effortlessly swings into position from transport to working position and you are
ready to fill. You can also put a set of scales under the BTS-295 and use it as a weigh wagon tender.
BTS-410 Fertilizer/Seed Tender
• Conveyor load out, use with any seed or granular
fertilizer.
• Very productive – no more handling bags.
• Equal split hopper allows you to handle both seed and
fertilizer with one unit. Three compartment hoppers
also available.
• Onboard scale available.
With the BTS-410 Seed Tender an equal split hopper is standard. This gives you more options. You can haul a total of 410 units (338 bu.) of
seed or 200+ units (168 bu.) of seed and 6 tons of fertilizer.
With the conveyor load out you do not have to worry about cross contamination. Load out your seed, close the gate and run the conveyor
until it is clean then load your fertilizer.
Available wireless remote gives you remote starting, throttle control, power conveyor swing and control of the gates.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-28
B-B Sprayer Trailer
Semi-Style Sprayer Trailer (45,000 GVW)
Will Build to Your Specifications
Willmar 24 Ton Side Shooter Tender on B-B Trailer
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-29
T16ET Water/Fertilizer Wagon with
1200 or 1400 Sump Bottom Tank
T14ESCT Trailer with
CB1200 Cone Bottom Tank
GN2000WG-LC Low Profile Liquid Cart
with 1200 Gallon Cone Bottom Tank
GN2000WG NH3 Wagon for Two
1000 or Two 1465 Gallon Tanks
GN2000WG-T NH3 Wagon for Two 1000, Two 1465
or One 3000 Gallon NH3 Tank – Tandem Rear Axle
NH3 Adjustable Wagon for
1000 or 1465 Gallon Tanks
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-30
B-B Toolbars
Standard Features – All Models:
• Self leveling rear hitch.
• Adjustable combo clevis.
• Heavy duty jack and safety chains.
• NH3 hose safety swing arm.
• Flashing and warning tail lamps.
• Colters available on 42', 47' and 52' models.
• 4" x 6" main frame and wing tubing.
• 4" x 8" A-frame tubing.
• Several spacing options available.
• Many NH3 systems options available.
TB-60 60' NH3 Toolbar
Specifications for 42' & 47' Toolbar:
Specifications for 52' Toolbar:
Specifications for 60' Toolbar:
Main Transport Hydraulic Lift
• 2 walking tandems.
• (4) 6,000 lb. 8-bolt hubs and spindles.
• (4) 12.5L tires with 15" x 10" 8-bolt rims.
Main Transport Hydraulic Lift
• 2 walking tandems.
• (4) 6,000 lb. 8-bolt hubs and spindles.
• (4) 12.5L tires with 15" x 10" 8-bolt rims.
Main Transport Hydraulic Lift
• 2 walking tandems.
• (4) 6,000 lb. 8-bolt hubs and spindles.
• (4) 12.5L 20-ply tires with 15" x 10" 8-bolt rims.
Outer Hydraulic Single Lift Wheels
• 2 walking tandems.
• (2) 4,500 lb. 6-bolt hubs and spindles.
• (2) 9.5L tires with 15" x 8" 6-bolt rims.
Middle Hydraulic Lift Wheels
• 2 walking tandems.
• (4) 4,500 lb. 6-bolt hubs and spindles.
• (4) 9.5L tires with 15" x 8" 6-bolt rims.
Middle Hydraulic Lift Wheels
• 2 walking tandems.
• (4) 4,500 lb. 6-bolt hubs and spindles.
• (4) 9.5L tires with 15" x 8" 6-bolt rims.
Pin Adjust Gauge Wheels
• (2) 3,500 lb. 6-bolt hubs and spindles.
• (2) 9.5L tires with 15" x 8" 6-bolt rims.
Outer Hydraulic Single Lift Wheels
• (2) 4,500 lb. 6-bolt hubs and spindles.
• (2) 9.5L tires with 15" x 8" 6-bolt rims.
Outer Hydraulic Single Lift Wheels
• (2) 4,500 lb. 6-bolt hubs and spindles.
• (2) 9.5L tires with 15" x 8" 6-bolt rims.
Warranty:
3 Years - Basic main and wing frame weldments.
1 Year - All other components, except tires.
Pin Adjust Gauge Wheels
• (2) 3,500 lb. 6-bolt hubs and spindles.
• (2) 9.5L tires with 15" x 8" 6-bolt rims.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-31
P&H Manufacturing offers a complete
line of Water/Fertilizer wagons and
other application equipment.
CRADLE RIDE SUSPENSION
The standard 3 point cradle ride tank suspension feature of P & H
wagons produces even load distribution to all four wheels when
transporting over rough, uneven terrain without transmitting
torsional stress and strain to the tank. Permits safer operation under
more adverse field conditions with light gauge tanks.
2806AWT NH3 Wagon for 1450 Gallon Tank
ADDED VALUE FEATURES:
• Rocking front bolster with no spring shackles to break.
• Rugged spring loaded hitch with bull 360º oscillation.
• Replaceable oscillating coupling pole, adjustable in length to
accommodate various tank lengths.
• 2" solid steel spindles.
• Rear brake flanges.
• Rugged 1/4" thick domestic steel construction throughout.
Anhydrous Ammonia Tanks
TRINITY CONTAINERS is an 80 year
manufacturing veteran of ASME pressure
vessels and leading supplier of containers
in North America. Their product line
includes a wide variety of containers for
residential, agriculture, commercial and
industrial applications.
ANHYDROUNS AMMONIA TANKS
Trinity Containers anhydrous ammonia tanks conform to the latest edition and addenda of the ASME code for Pressure Vessels, Section VIII,
Division 1. Complies with ANSI K61.1-1999. Rated at 250 psig from -20º F. to 125º F.
Vessels are externally blasted per SSPC-SP6. 41" to 46" diameter are external powder coat, 60" to 72" diameter are painted with acrylic
polyurethane.
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-32
Amber Waves
Hopper Bottom Grain and Fertilizer Bins
Experience Amber Waves Inc.
• Extra heavy steel design.
• Quality craftsmanship.
• Aeration system assists drying.
• Professional delivery and setup.
MULTI-PURPOSE BINS
15 and 16 foot diameter bins
42º bottom cone, 35º top cone
BUSHELS
CUBIC
FEET
BIN
HEIGHT
AUGER
LENGTH
LEGS
1510
1,350
1,635
18' 8"
36'
6
1520
2,100
2,518
23' 8"
41'
6
1530
2,850
3,402
28' 6"
51'
8
1540
3,600
4,285
33' 6"
61'
8
1630
3,200
3,820
29' 2"
51'
8
1640
4,000
4,774
34' 2"
61'
8
MODEL
Belgrade #304 2B Stainless Steel Cone Bottom Tanks
Features:
• Heavy gauge stainless steel.
• 18" manhole.
• 2" half coupling discharge.
• 2" half coupling sparge.
• Lifting lugs.
• A36 angle iron legs and base pad.
• Optional ladders.
Eight Standard Sizes
GAL.
DIA.
S.W.
O.A.H.
1097
6' 4"
4'
7'
1568
6' 4"
6'
9'
2039
6' 4"
8'
11'
2509
6' 4"
10'
13'
2980
6' 4"
12'
15'
4087
7' 11 1/2"
10'
13' 6"
4830
7' 11 1/2"
12'
15' 6"
5580
7' 11 1/2"
14'
17' 6"
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-33
Everyone that has had to do with liquid storage and transfer knows a good tank is essential
to providing desirable results. The Enduratank is manufactured with maximum value for
money in mind and is widely renowned as the highest quality poly tank on the market today.
• Enduraplas poly tanks will never rust or corrode providing you with years of reliable service.
REINFORCING RIBS
Stiffening ribs are an especially important design detail on rotationally molded
plastic parts. Relatively speaking, rotationally molded parts frequently have walls
which are quite thin in comparison to their size. The skillful use of stiffening ribs
can increase the part’s stiffness by keeping the nominal wall to a minimum. The
correct use of stiffening ribs can result in strong, lightweight parts.
Rounded stiffening ribs are frequently specified, as they are easier to produce in
the mold. However, for the same amount of added plastic material used, the
rectangular shaped reinforcing rib will provide more stiffness, due to the
perpendicular positioning.
Rotational molding is a plastics processing technique that is ideally suited to
producing relatively large, hollow, seamless parts which are partially or totally
enclosed. This process has been in existence since the early 1930s.
ENDURAPLAS
HAS A FULL LINE OF
TANKS AVAILABLE.
GIVE US A CALL FOR
MORE DETAILS.
The low processing pressure involved in rotational molding has the added
advantage of producing parts which are relatively stress free, as compared to
other high pressure processes. This advantage of the process is especially
important when considering large, load bearing parts in applications which must
provide corrosion or stress crack resistance.
AFFORDABLE WATER ONLY TANKS NOW AVAILABLE
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-34
Cone Bottom Storage Trailer
6000 AND 9000 GALLON PORTABLE STORAGE
TRAILERS
• Storage trailer can be moved from site to site when empty.
• Hydraulic jack manually lowers trailer frame onto ground for
filling.
• 15º cone bottom and full drain bung for total evacuation of
contents.
• Heavy duty finish on steel frame for superior durability.
• Available with your choice of pump and plumbing packages.
7 YEAR
TANK
WARRANTY
SUPERIOR FINISH
HEAVY DUTY
SECURING
SYSTEM
CENTRAL
CYLINDER FOR
STABLE LIFTING
Phone: 800-437-9702 Fax: 800-313-3299 www.feiinc.com
E-35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement