LDP-9030D Digital Telephone Description Quick Guide Fixed Feature button definition Button Description 3 Soft Used in conjunction with fixed and flexible features, and the function changes in relation to call progress, as indicated on the LCD display. Page Used to change more additional functions on the LCD display . Trans/PGM This button is used to initiate a call transfer (TRS) or to enter programming mode (PGM). Speed Used to access speed dialing, speed programming, save number redial, and last number redial. DND The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active, the red LED in this button is illuminated. Call Back A station can initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled. Mute Toggle outgoing audio; red LED illuminates. Volume The volume button adjusts the audio levels for ringing, handset and speakerphone functions. Speaker Speaker toggles the speakerphone state, and the red LED is illuminated when the speakerphone is active. Hold/Save This button is used to put a call on hold or save information when programming. Flexible Some flexible buttons are pre-programmed in the system for line appearances, loop functions etc. The remaining flexible buttons can be user-programmed. Visual Ringing LED Illuminates when the phone is ringing. LCD Display Displays information about telephone status, dialing directories,and test message information. Hands-free Microphone Microphone is used for hands-free speakerphone function. LDP Keyset User Operation Receiving calls _ Answering a Call While Idle : 1. Lift the handset and press the flashing Flex button (as needed), the call will be connected. Responding to a Call While Busy 1. Press [Hold/Save] and/or 2. Press the flashing CO line button. Answering Calls to Other Stations To answer a call ringing at another station: 1. Lift the handset, 2. Dial 7 (Directed Call Pick-Up code), 3. Dial the Intercom Number of the ringing station; the call will be connected. To answer a call ringing at a station in your group: 1. Lift the handset, 2. Dial * * (Group Call Pick-Up code), the call is connected. Using Do-Not-Disturb (DND) to Block Incoming Calls To toggle DND ON and OFF: 1. Press the [DND] button. Forwarding calls to another Station or Voice Mail To activate Call Forward from your phone to another phone or internal system resource: 1. 2. 3. 4. Lift the handset, Press the [Fwd] Soft button, Dial the type of forward code 1-4 Dial the destination number. Placing Intercom calls To place an Intercom call: 1. Lift the handset, To enter a Station Speed Dial number with CO Line and Name: 1. 2. 3. 4. 5. 6. 7. Press [Trans/PGM], Press [Speed], Dial the desired Station Speed Dial bin number, Select/dial the CO line/group, Dial the desired number to be stored, Press [Hold/Save], Enter the associated name if desired, using the alpha-numeric entry chart, 8. Press [Hold/Save]. To assign a Station Speed Dial number directly to a Flex button: 1. Press [Trans/PGM], 2. Press the desired [Flexible] button, 3. Dial the desired number including CO Line/Group access code 4. Press [Hold/Save], 5. Enter the associated name if desired, using the Character Entry chart, 6. Press [Hold/Save]. ACNR: To retry a busy external number until answered To set up an ACNR, while on an outgoing call: 1. Use the Navigation button to display the next menu and select the [ACNR] Soft button, 2. Hang-up handset. To cancel the ACNR request: 1. Press the [ACNR] Soft button. Call Transfer: Sending a call to a different destination To Transfer an active call: 2. Dial the Intercom number of the desired station, 3. On answer or Splash tone, speak to the called party. 1. Press [Trans/PGM], 2. Call receiving party, 3. Hang-up with or without announcement. Using Camp-On when calling a busy station To Camp-On (wait off-hook) for a busy station: Call Hold: Placing a call in a waiting state To place a call on Hold: 1. Press [*] and wait an answer. Using Last Number Redial (LNR) To dial the Last Number for an external call: 1. Lift the handset, 2. Select the [Redial] Soft button, 3. Press [▼ volume ▲] to select from the last 10 numbers dialed, 4. Press the [Send] Soft button or [Hold/Save]. Using System Speed Dial Numbers To place a call using System Speed Dial: 1. Lift the handset, 2. Press the [Speed] button, 3. Dial the desired System Speed Dial bin number Using and Entering Station Speed Dial Numbers To place a call using Station Speed Dial: 1. Lift the handset, 2. Press [Speed], 3. Dial the desired Station Speed Dial bin number 1. Press [Hold/Save]. Joining Multiple People in a Conference To establish a Conference: 1. Establish call with one of the desired conference parties, 2. Select the [Conf] Soft button, 3. Establish call with the other conference party, 4. Select the [Conf] Soft button, 5. Select the [Conf] Soft button again to establish the conference. To place a Conference on Hold: 1. Press the [Hold/Save] button. To retrieve the Conference: 1. Select the [Conf] Soft button. To make an External-parties-only Conference: 1. Establish conference with two external parties, 2. Select the [Conf] Soft button to exit. To enter pre-opened Conference Room: 1. Dial 5 7 X when X is the conference room number.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project