advertisement
BASIC FEATURES ENDING A CALL
Using the handset:
Hang up the handset or press the Cancel soft key.
Using the speakerphone:
Press or the Cancel soft key.
Using the headset:
Press the Cancel soft key.
REDIAL
Press to enter the Dialed Calls list. Press or
SIP-T26P IP Phone
Quick User Guide
For detailed information please consult the Star2Star Phone and Features Guide, available for view/download via the
Star2Star Knowledge Base at:
https://support.star2star.com/
1 LCD Screen
2 Power LED
3 Line Keys
4 Memory Keys
5 MESSAGE Key
6 HEADSET Key
7 HOLD Key
8 TRAN Key
9 MUTE Key
10 Speakerphone Key
11 Redial Key
12 CONF Key
13 Volume Key
14 Key Pad
15 Scroll Keys
16 Soft Keys
MAKING A CALL
Using the handset:
1. Pick up the handset.
2. Enter the number, then press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, then press the Send soft key.
Using the headset:
1. With the headset connected, press headset mode.
to activate the
2. Enter the number, and then press the Send soft key.
Note: During a call you may alternate between headset, hands-free speakerphone and handset modes by pressing the
Headset key or Speakerphone key or by picking up the handset. Headset mode requires a headset be connected to the phone.
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Note: You may ignore an incoming call by pressing the Reject soft key.
Page 1 of 2 to select the desired call, then press key.
Press number. twice when the phone is idle to call the last dialed
MUTING A CALL
Press
or the Send soft
to mute the microphone during a call.
Press again to un-mute the call.
VOLUME ADJUSTMENT
Press during a call to adjust the receiver volume of the handset/speakerphone/headset.
Press volume.
when the phone is idle to adjust the ringer
RING TONE
1. Press the Menu soft key when the phone is idle, then select
Settings > Basic Settings > Ring Tones.
2. Press or to select the desired ring tone.
3. Press Save soft key to accept the change.
PUTTING A CALL ON HOLD
Press or the Hold soft key during an active call.
If there is only one call on hold, press soft key.
If there is more than one call on hold, press select the desired call, then press key.
TRANSFERING A CALL or the Resume soft
There are three ways to transfer a call: Blind Transfer,
Attended Transfer and Semi-Attended Transfer.
Star2Star Yealink SIP-T26P Quick User Guide
Copyright © 2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications. or the Resume or to
Blind Transfer:
1. Press
The call is placed on hold.
2. Enter the number you want to transfer to.
3. Press or the Transfer soft key.
Semi-Attended Transfer:
1. Press or the Transfer soft key during an active call.
The call is placed on hold.
2. Enter the number you want to transfer to, then press
3. Press ring-back tone. or the Transfer soft key when you hear the
Attended Transfer:
1. Press or the Transfer soft key during an active call. or the Transfer soft key during an active call.
The call is placed on hold.
2. Enter the number you want to transfer to, then press
Always Forward: Incoming calls are all forwarded unconditionally.
No Answer Forward: Incoming calls are forwarded when the phone is not answered after a preset time period.
3. Enter the number you want to forward to. For No Answer
Forward, enter the ring time to wait before forwarding.
4. Press the Save soft key to accept the change.
.
.
3. Press answers. or the Transfer soft key when the second party
FORWARDING A CALL
1. Press the Menu soft key when the phone is idle, then select
Features > Call Forward.
2. Select the desired forward type:
Busy Forward: Incoming calls are forwarded when the phone is busy.
PARKING A CALL
1. With a call in progress press the Park key located at the top of the 10-key array (right side of phone).
Note: The shared park appearance feature is defined in the system configuration (Location Information). Consult your
system administrator or Dealer for more information.
2. The phone will automatically park the call in the first available park position.
3. The shared park appearance position key glows red and the caller is now parked.
4. The caller will hear music or message on hold if configured on your system.
5. Press the relevant Park position key on your phone or any similar model local extension to retrieve the call.
FIND-ME / FOLLOW-ME
Use the Star2Star Find-Me / Follow-Me feature in the
Star2Star Web portal to forward calls from your extension.
Follow Me (Immediate) -- Calls to your extension will be sent automatically to the number you define.
Find Me (Sequential) -- Calls to your extension will ring your extension and any other numbers that you define, in order.
Find Me (All) -- Calls to your extension will ring your extension and any other numbers that you define, all at once.
CONFERENCE CALL
1. Press or the Conf soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, then press the Send soft key.
3. Press or the Conf soft key again when the second party answers. All parties are now joined in the conference.
4. When you hang up, you will be disconnected. The other parties will remain connected.
Note: You can split the conference call into two individual calls by pressing the Split soft key.
VOICE MAIL
The Message Waiting Indicator on the idle screen indicates that you have new voice messages waiting. The Message key
LED lights up.
Listening to voice messages:
1. Press twice. A stuttered dial tone will sound.
2. Follow the voice prompts to listen to your voice messages.
Alternatively you can dial 1000 to access the Voicemail system at any time. The system will prompt for your password.
Note: when accessing the voice mail system for the first time your password is your extension #. Change this to a 4-digit number you can easily recall.
Page 2 of 2
SPEED DIAL
Use the Star2Star Web Portal https://portal.star2star.com/ to configure speed dial buttons in individual phone settings.
When configured on your phone, press the designated speed dial key to dial out the preset number.
CONTACT DIRECTORY
Note: The Star2Star Company Directory is automatically downloaded.
To access the company directory, press the Directory soft key when the phone is idle, then select Remote Phonebook >
Company Directory.
Adding a contact:
1. Press the Dir soft key when the phone is idle, then select
Local Directory > Contacts.
2. Press the Add soft key to add a contact.
3. Enter a unique contact name in the Name field and enter the phone number in the proper field.
4. Press the Save soft key to accept the change.
(Note): If your phone firmware is updated, contacts entered in this manner will be lost. However, the company directory uploaded by Star2Star will remain intact.
Editing a contact:
1. Press the Dir soft key when the phone is idle, then select
Local Directory > Contacts.
2. Press or to select the desired contact. Press the
Option soft key and then select Detail from the prompt list.
3. Update the contact information.
4. Press the Save soft key to accept the change.
Deleting a contact:
1. Press the Dir soft key when the phone is idle, and then select Local Directory > Contacts.
2. Press or to select the desired contact. Press the
Option soft key, then select Delete from the prompt list.
3. Press the OK soft key when “Delete Selected Item?” prompts on the LCD screen.
CALL PICKUP
1. To pick up a call ringing a specific phone that is not ringing as part of a Ring Group, dial *8xxx (xxx being the extension of the ringing phone).
2. For example your neighbor’s phone extension 112 is
3 ringing. You would dial *8112 to pickup that call.
.
To pick up a call on any ringing phone dial *8.
Star2Star Yealink SIP-T26P Quick User Guide
Copyright © 2012, Star2Star Communications, LLC. All rights reserved. Star2Star is a registered Trademark of Star2Star Communications.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project