catalogue - Coda Audio
CATALOGUE
1
Coda Audio – European designer and manufacturer
of high quality speaker systems
Coda Audio is a leading designer and manufacturer of the
highest quality pro-audio loudspeaker systems. We believe that developing a good loudspeaker system starts
with designing the correct drivers. Due to our unique, patented driver design, Coda Audio loudspeaker systems are
extremely transparent and detailed, providing outstanding dynamic results. Coda Audio’s advanced transducer
technology offers significant advantage over conventional
drivers in precision and reliability. Almost all critical parts
of the cabinets and the drivers are produced in Europe, in
our own factories, to ensure exacting and extensive control
of all results. Voice coil winding, diaphragm forming, CNC
machining is all undertaken internally by highly qualified
professionals.
Durability and reliability are most important in all professional applications. Rugged construction, featuring Baltic
birch plywood for the cabinets and a very intensive testing process ensure reliability and consistency. The fact that
our entire manufacturing process takes place in our own
factories has produced a substantial reduction in cost and
a high degree of flexibility and efficiency. The wide product
range is designed to offer excellent quality solutions which
are able to satisfy the most discerning and complex of professional sound reinforcement applications. Coda Audio is
represented via a global network of international distributors.
We believe that the best way to get to know us better is by
listening to our loudspeakers because:
HEARING IS BELIEVING
Coda Audio
Boulevard der EU 6
30539 Hannover, Expo Park
Germany
Phone: +49 (0)511- 866 558 88
Fax: +49 (0)511- 866 558 87
E-Mail: contact@codaaudio.com
Website: www.codaaudio.com
2
Content
AIRLINE LA12 large line array systems
8
AIRLINE LA12
8
Sensor controlled subwoofers
10
SC8 / SC8F
11
SC3-F12
ViRAY compact line array systems
ViRAY14
SCV-F18
SC2-F20
EASE Focus 2 software
22
CoRAY line source column systems
23
CoRAY424
CoRAY4L25
Sensor controlled subwoofers
26
SCP / SCP-F
26
SC427
CUE-Series stage monitors
CUE ONE
CUE TWO
CUE FOUR
28
29
30
31
G-Series full range multipurpoise systems
32
G308 / G308F
34
G51235
G51536
G71237
G71538
G-SUB subwoofers
39
G15-SUB40
G18-SUB41
PW-Series subwoofers
PW112 / PW112A
PW115 / PW115A
PW118 / PW118A
42
43
44
45
D-Series installation systems
46
D5-Tube / D5-Ceiling
47
D5-Cube48
D849
D1250
D2051
CoRAYi installation line source column systems 52
CoRAY4i52
CoRAY4Li53
OMNIO omnidirectional installation systems
54
OMNIO555
D-Core Active PA-systems
56
D-Core256
D-Core558
D-Core860
Electronics 62
C362
C564
Content
LINUS4
LINUS RACKs
5
LINUS106
LINUS CON
7
3
LINUS
LINUS-Series
Having total control of your art - LINUS systems by Coda Audio
More power, more control, more communication, more efficiency
The creation of Coda Audio’s own Power/DSP platform,
encompassing a range of two and four channel DSP/amplifiers, with audio networking, graphical user interface all
designed to be the future proof control/power platform for
all Coda Audio speaker systems.
The first product in the range is the LINUS10 a dual channel DSP, Network, Comparator and Amplifier delivering
10000 W of clean power in a light weight 19”/2U package.
The exceptional power of the LINUS10 ensures maximum
headroom and optimal system performance for all Coda
Audio touring systems. This engine technology, already
tried and tested, is now combined with; LINUS CORE – the
dual SHARC floating point DSP processors, ensuring vast
processing power which enables the integration of sophisticated audio algorithms for the most exacting results. The
advanced signal processing includes IIR and phase linear
FIR filters for perfect linearity and superior sound performance as well as look-ahead and frequency dependent
limiters for increased system headroom.
touring + installation
4
LiNET transmits the digital audio signal over a standard
CAT5 cable. Up to 8 digital audio signals can be sent to
each amplifier via LiNET, buffered and sent to the next unit
via the LiNET link out for daisy chaining. The signal routing
inside the LINUS10 can be controlled remotely or via the
unit’s front panel controls. The integrated AVB Network provides the ability for digital audio distribution over Ethernet.
LINUS LIVE is an Ethernet based, graphical user interface,
allowing for fast and flexible system configuration, tuning
and control, intuitive and straight forward in design, fast
and practical in use.
LINUS CORE/LiNET/LINUS LIVE a far reaching and powerful set of technologies applied to each LINUS device, allowing complete system integration, configuration and ultimate
control. Completing the LINUS10’s technology count is the
COMPARATOR - the LINUS10 provides integrated feedback loop control for sensor controlled subwoofers. The
Comparator’s electronic circuit loop measures the voice
coil movement and adjusts the amplifier driving voltage
and/or current to correct any driver inaccuracy. The key
advantage is a very extended and controlled response.
Any distortion produced by the driver or the enclosure is
instantly corrected by the feedback.
LINUS CON is a 4 input / 6 output speaker management
system featuring IIR and FIR filtering, delivering all the
LINUS technologies in a standalone controller which provides ultimate system design configuration flexibility for applications where outboard controller options are preferred.
It also allows for LINUS DSP upgrades for existing systems.
Complete with LINUS CORE/LiNET/LINUS LIVE technology, LINUS CON joins LINUS10 as the first products in the
LINUS family to be introduced from a range that will see
additional multi-channel amplifiers/DSP products released
during the course 2014.
19“ Racks
LINUS RACK20
LINUS RACK40
LINUS RACK20
LINUS RACK40
4x LINUS10 amplifiers
11U Touring Case
PAN8 Connector panel 2U
PD32-6 Power distribution
Internal cables
Cover
Application:
LINUS RACK20 is optimized to power Compact Coda Line
Array Line Array Systems, Sensor controlled Subwoofers
and as an addition to Large AIRLINE LA12 Line Array Systems.
Application:
LINUS RACK40 is optimized to power the Coda Audio large
touring products including: Large AIRLINE Line Array Systems, Sensor Controlled Subwoofers, Compact Line Array
Systems (bi-amp) in larger configurations.
Coda Audio’s LINUS Tour racks, LINUS RACK20 and
LINUS RACK40, provide complete housing and system
connection solutions for ease of use and rugged protection
for all Coda Audio Line Array and SC systems.
With an internal shock-mount steel suspension system
providing maximum protection to the LINUS amplifiers, the
rack design also features a rack to rack connection system
allowing for flown or ground stacked positioning and the
connection point for the transport system.
The racks also provide an advanced front facing cable
connection patch panel and rear mounted AC mains distribution system designed to facilitate quick and accurate
set-up.
In addition, the LINUS DSP platform provides factory presets for all Coda Audio Product, therefore along with providing FOH system control these racks can be used for application such as; monitor system, delay systems, zoned
systems, in fact wherever you need power & processing
for your Coda system. The LINUS touring rack has an advanced set of technical and physical solutions that will deliver across all application areas. Smart in design highly
durable in construction and constant in delivering highest
possible results the rack design completes the Coda Audio
systemisation concept for touring/temporary applications.
For fixed Installations the LINUS RACK20i and LINUS
RACK40i provide a none shock-mount / AC distribution
version. Both maintain the same LINUS amplification and
patch panel systems and this allows continuity for venues
which may need to increase installed systems size/location on temporary basis with ease from local hire networks.
“LINUS Technology” delivers in all areas to all audio professionals.
TECHNICAL SPECIFICATIONS
Size:
Number of amplifiers:
Shock mounts:
Doors:
Castors:
Power distribution:
Connector panel:
Soft cover:
Weight:
LINUS RACK20
19”/7U 2
yes
sliding doors
optional dolly DOT-RC
PD32, 3x 32A PAN4 yes
64 kg
LINUS RACK40
19”/11U
4
yes
sliding doors
optional dolly DOT-RC
PD32-6
PAN8
yes
98 kg
touring + installation LINUS RACK 20
2x LINUS10 amplifiers
7U Touring Case
PAN4 Connector panel 1U
PD32 Power distribution
Internal cables
Cover
LINUS RACKs
5
AIRLINE
LINUS10LA / SC-Series
2-channel DSP amplifier
LINUS10
LINUS10
2-channel DSP amplifier
Integrated DSP, Network, Comparator and Amplifier
solution
2 x 4955W @ 4 Ohms
High output voltage (200V peak) provides plenty of
headroom
True Class H design for superior sound performance
SMPS with automatic selection for 115 V or 230 V
SHARC floating point DSP @ 96 kHz
2 balanced analogue inputs
AVB compatible
LiNET – 8x freely configurable digital audio signals
over a CAT5 cable
2 dynamic comparators for use with Coda Audio
sensor controlled subwoofers
Advanced IIR and linear phase FIR filters
LINUS LIVE - Network Control and Monitoring of
amplifiers over Ethernet
Factory presets for all Coda Audio loudspeaker
systems
6 year warranty
Description:
The LINUS10 is a dual channel DSP, Network, Comparator
and Amplifier delivering 10000 W of clean power in a light
weight 19”/2U package. The exceptional power of the
LINUS 10 ensures maximum headroom and optimal system
performance for all Coda Audio touring systems.
LINUS10 ENGINE - the hybrid class H output stage
topology delivers audiophile sonic accuracy with enormous
headroom providing significant improvement of the system
performance in dynamic and transparency.
APPLICATIONS – containing factory presets for all Coda
Audio loudspeaker systems LINUS10 is ideally suited to
touring and installation applications.
TECHNICAL SPECIFICATIONS LINUS10
GENERAL
Channels
2 inputs (Analogue, LiNET, AVB) routable
to any of the 2 outputs
AUDIO
Input impedance
Max Input level
Output noise (analogue input)*
Output noise (digital input)*
Frequency response
(20 Hz - 20 kHz)
THD+N (20 Hz – 20 kHz)
SMPTE (20 Hz – 20 kHz)
Damping Factor
12k balanced
+21dBu
< -107 dB (unweighted) / -110dB (A-weighted)
< -116 dB (unweighted) / -119dB (A-weighted)
+ /-0.1 dB at 4 Ohms
< 0.01%, 8 Ohms P/2
< 0.01%, 8 Ohms P/2
> 400
DSP
Inputs2x
Outputs2x
Processor:
Analog Devices SHARC DSP
Sampling rate
96 kHz / 32 bit floating point
Presets
190 Factory and 10 User presets
touring + installation
6
COMPARATOR
Comparator channels
TECHNICAL SPECIFICATIONS LINUS10
FRONT PANEL
Power on/off switch
yes
Displayyes
Mute buttons
each channel
Menu buttons
provide front panel control
Signal, Limit, Protect LEDs each channel
Comparator LEDs
2 x disconnected sensor (red)
Input signal detection LEDs Analogue, LiNET, AVB
Ethernet LED
yes
Standby LED
yes
REAR PANEL
Balanced analogue inputs 2 x XLR / F
Link analogue signal
2 x XLR / M
LiNET input
RJ45
LiNET daisy-chain link
RJ45
LINUS LIVE (User interface) RJ45 (Ethernet)
LINUS LIVE daisy-chain link RJ45 (Ethernet)
AVB input
RJ45
AUX
RJ45
Sensor inputs
XLR/F - 5Pol
Amplifier outputs
2 x NL4
Mains
Neutrik PowerCon 32A
2x
AMPLIFIERS
Number of channels 2x
8 Ω* 2x 2300 W
4 Ω* 2x 4000 W
2 Ω* 2x 5100 W
Peak***
2x 5300 W
Output Circuitry
Class H
Output Voltage
200V/pk
* All channels driven, 1 kHz, >1% THD @VAC
MAINS POWER
Dual-voltage SMPS with automatic voltage
selection
230V: 180 - 267V (47-63 Hz)
120V: 70 - 134V (47-63 Hz)
Net Weight
14 kg
Shipping weight
15.6 kg
Dimensions (WxHxD)
483 x 88.9 x 453 mm (19” x 3.5” x 17.8”)
Shipping Dim. (WxHxD) 540 x 135 x 615 mm (0.045 m³),
(21.3” x 5.3” x 24.2”)
** Peak Power at 4 Ohm, component tolerance dependent (+/- 1.25%)
4 controlled
channel loudspeaker
management system
CON
Sensor
4x 18“ subwoofer
AIRLINE LA- LINUS
/ SC-Series
LINUS CON
LINUS CON
4 channel loudspeaker
management system
Description:
The LINUS CON loudspeaker management system is
designed to control all Coda Audio loudspeaker systems.
The 19”/1U unit incorporates 4 balanced analogue inputs, 4
outputs (analogue and AES3) and can receive up to 8 digital
signals via LINET.
The unit can be controlled directly from its front panel or
using the Ethernet based LINUS LIVE user interface.
APPLICATIONS – containing factory presets for all Coda
Audio loudspeaker systems, LINUS CON is ideally suited to
touring and installation applications.
TECHNICAL SPECIFICATIONS LINUS CON
GENERAL
Channels
4 inputs (Analogue, LiNET, AVB) routable to
any of the 4 outputs
AUDIO
Input impedance
Max Input level
Output noise (analogue input)*
Output noise (digital input)*
Frequency response
(10 Hz - 30 kHz)
THD+N (20Hz-20kHz)
12k balanced
+18dBu
< -114 dB (unweighted) / -117dB (A-weighted)
< -117 dB (unweighted) / -120dB (A-weighted)
+ /-0.5 dB
< 0.001%
DSP
Inputs4x
Outputs4x
Processor
Analogue Devices SHARC DSP
Sampling rate
96 kHz / 32 bit floating point
Presets
190 Factory and 10 user presets
Advanced IIR and linear phase FIR filters
LINUS LIVE - Network Control and Monitoring of
amplifiers over Ethernet
Factory presets for all Coda Audio loudspeaker
systems
6 year warranty
TECHNICAL SPECIFICATIONS LINUS CON
FRONT PANEL
Balanced analogue inputs
4x XLR / F
LiNET input
RJ45
LiNET daisy-chain link
RJ45
Ethernet input
RJ45
Ethernet daisy-chain link
RJ45
Displayyes
Mute buttons
each channel
Menu buttons
provide front panel control
Signal, Limit, Protect LEDs
each channel
Input signal detection LEDs
Analogue, LiNET, AVB
Ethernet LED
yes
Standby LED
yes
REAR PANEL
Balanced analogue in and outputs
AVB input
AUX
Balanced analogue outputs
AES3 outputs
Mains
SubD 25
RJ45
RJ45
4 x XLR / M
2 x XLR / M
Neutrik PowerCon 20A
MAINS POWER
90 - 264V (47-63 Hz)
Net Weight
Shipping weight
Dimensions (WxHxD)
Shipping Dim. (WxHxD)
3.4 kg (6.8 lbs)
3.8 kg (7.7 lbs)
483 x 44 x 216 mm (19” x 1.75” x 8.5”)
510 x 80 x 360 mm (20” x 3.15” X 14.17”)
* Noise measurement is referenced to Fullscale Outputlevel +18dBU with
transparent DSP-Settings
touring + installation 4 inputs and 4 outputs (LiNET)
SHARC floating point DSP @ 96 kHz
High quality A/D/A convertors with 24-bit resolution
@ 96kHz
LiNET – 8x freely configurable digital audio signals
over a CAT5 cable
AVB compatible
7
AIRLINE LA12 Large line array systems
AIRLINE LA-Series
Our commitment to advanced technology.
AIRLINE LA-Series line array systems present our commitment to advanced technology offering high fidelity sound,
even wide-dispersion characteristics and extreme high spl
optimized for use in professional touring applications such
as open air concerts, festivals and arenas as well as sound
installations in stadiums, houses of worship, large clubs,
theatres and musicals.
At the heart of the Coda Audio AIRLINE LA-Series LineArrays is the unique 4-inch planar wave driver. Coda Audio
developed a unique driver technology to radiate a coherent
planar wave front from a rectangular piston without internal
diffraction for superior dispersion control and high fidelity
sound. The driver contains a high energy neodymium magnet system and a unique annular ring diaphragm. The ring
diaphragm works similar as a wound 140 mm long ribbon
diaphragm providing linear frequency response up to 20
kHz.
The advanced driver design allows perfect acoustical coupling of individual units to create a virtually continuous and
truly coherent line source.
The AIRLINE LA12 is a 3-way symmetrical high output line
array module, designed for large venues where high fidelity
sound and outstanding intelligibility is required.
State-of-the-art drivers
Low: The cabinet contains two 12” neodymium ultra low
distortion cone drivers covering the 50 Hz – 400 Hz range.
The double 12” long excursion drivers contain high flux linear motors with triple demodulation rings for ultra low distortion and increased power handling.
touring + installation
8
Mid: Our goal was to generate very high resolution and
high dynamic range. To achieve this we developed a special transducer which works in the mid range as a pure piston without the breaking up modes typical for direct radiating small cone drivers. Another aim was to increase the
sensitivity and get outstanding headroom in the very important middle range. The AIRLINE LA12 contains four 3.5”
voice coil neodymium mid range drivers with unique ring
diaphragms covering the 350 Hz – 1700 Hz range. Loaded
to advanced hyperbolic lenses they achieve very high sensitivity of 116 dB 1 W / 1 m above 300 Hz. This means that
the drivers need less power to produce enormous high spl
and work almost at less than 10% of their nominal power
handling. Therefore the ability to reproduce peaks is unique
and is practically only limited by the electronics. This patented design is a result of extensive dedicated research
and development resulting in near zero power compression, dramatic improvement in dynamic response, clarity
and transparency.
High: The three 4” HF planar wave drivers contain unique
annular ring diaphragms to radiate a coherent planar wavefront without internal diffraction. This distinctive technology
allows perfect acoustical coupling for superior dispersion
control and high fidelity sound.
Coherent wavefront
The tri-axial V-arrangement of the low, mid and high frequency drivers ensures coherent coupling between all
components. The high frequency planar wave drivers are
mounted in the middle, close to the mid-range hyperbolic
lenses. The twin 12” drivers are optimally placed to provide a constant horizontal directivity above 200 Hz. This arrangement combines the energy produced from all 9 transducers to perform as a single source achieving a coherent
and uniform wavefront.
Application:
The modules are designed to be used in multiples with a
minimum configuration of six. Up to 24 units can be arrayed
to achieve extreme high levels needed for the largest venues. The use of SC8 / SC8F subwoofers increases the low
frequency response. The integrated rigging system allows
quick and easy flying or ground stacking. Arrays may be
built straight or curved in various angles to obtain the desired vertical coverage. The Coda EASE Focus simulation
software allows you to calculate the perfect setup for every
application. Designed for large scale touring and installation
applications the AIRLINE LA12 is perfectly suited for open
air, stadiums and large theatres where outstanding output
capability and low power compression are needed.
Large line array systems
AIRLINE LA12
AIRLINE LA12
AIRLINE LA12
3-way symmetrical high output
line array system
Three Coda Audio 4” neodymium planar wave drivers (patent pending)
Four Coda Audio 3.5” coil neodymium mid range drivers
Twin Coda Audio 12” neodymium ultra low distortion woofers
100° horizontal coverage
Variable curving 0° - 8°
Outstanding SPL capability at very low power compression
Highest output to size ratio
Highest output to weight ratio
Superior sound
Integrated rigging system for flown or ground-stacked arrays
System components: LINUS RACKs, SC8, SC3-F
SYSTEM PERFORMANCE
Array
Horizontal Coverage Vertical Coverage Maximum Peak Output
1 x LA12
100°
-
137 dB
2 x LA12
100°
0° - 8°
143 dB
4 x LA12
100°
0° - 32°
149 dB
8 x LA12
100°
0° - 64°
155 dB
ACCESSORIES
FR120 Compact frame for flying up to 24 units of AIRLINE LA12 with
safety factor 1:10
FR122 Compact frame for flying or ground stacking AIRLINE LA12 and/or
SC8F in cardio mode
FR002 Upgrade kit FR120 to FR122
DOW-VR Downfill frame for flying ViRAY under LA12
DOL LA12 Transport and rigging dolly for single AIRLINE LA12
DOT LA12 Transport and rigging dolly for up to 4 units AIRLINE LA12 incl.
Lid
KIT 12F Adaptor kit for fixing FR120 / FR122 frame to DOT LA12 dolly
EXBAR 12 Extension bar for FR120 / FR122 frame
CO LA12x4 Protection cover for 4x AIRLINE LA12
CAL8SP-20 8-pole loudspeaker cable, 8x4 mm, 20 m
RIGGING POSSIBILITIES
AIRLINE LA12 + SC3-F
LA12 + SC8F
LA12+ViRAY
touring + installation TECHNICAL SPECIFICATIONS LA12
Type:
3-way high output line array module
Application:
Minimum 4, maximum 24 units line array
Frequency response:
50 Hz – 20 kHz (-3dB)
Power handling:
Low AES/Peak:
2000 / 8000 W
Mid AES/Peak: 600 / 6000 W
High AES/Peak:
240 / 2400 W
Sensitivity Low 1 W / 1m:
98 dB
Sensitivity Mid 1 W / 1 m: 116 dB
Sensitivity High 1 W / 1 m: 118 dB
Max. SPL peak Low:
137 dB
Max. SPL peak Mid:
153 dB
Max. SPL peak High:
152 dB
Dispersion Horizontal:
100°
Vertical: Array dependent, 0° - 8° in 1° steps
Components:
Low frequency:
2 x 12” neodymium woofers
4” voice coil, 1000 W (AES) each
Mid frequency: 4 x 2” neodymium drivers
3.5” voice coil, 150 W (AES) each
High frequency: 3 x 4” neodymium planar wave drivers
1.75” voice coil, 80 W (AES) each
Crossover point:
350 Hz, 1.600 Hz active
Input connectors:
Neutrik™ NL8MPR-BAG
Patch cable: Included
Nominal impedance:
LF1: 16 Ohm (+1 / -1) LF2: 16 Ohm (+2 / -2)
MF: 16 Ohm (+3 / -3) HF: 24 Ohm (+4 / -4)
Enclosure shape:
Horizontal trapezoid 2 x 4°
Enclosure material:
Baltic birch plywood
Finish:
Black Polyurea coating (water resistant)
Flying Hardware:
Included
Dimensions:
1108 x 339 x 495 mm
Net weight:
67 kg
9
Sensor controlled subwoofer
Sensor controlled subwoofers
The Feedback loop controlled subwoofers have clear advantages over conventional subwoofers when it comes to sonic
performance, output and size.
The advanced design aligns several new technologies for
outstanding performance.
Key technologies
• Award winning sensor controlled technology
• Feedback loop control – ultra low distortion, very extended and controlled response
• Long excursion 18” woofers with integrated velocity sensor
touring + installation
10
What is the Velocity Feedback Loop Comparator?
The specially designed 18” driver includes a built in “velocity
sensor” that measure precisely the movement of the voice
coil. The “velocity sensor” sends information to the Comparator about velocity, excursion and speed of the voice coil
(using XLR cable).
The comparator unit of the LINUS10 amplifier compares the
original input signal to the movement measurement from
the “velocity sensor” and adjusts the amplifier driving voltage and/or current so that the diaphragm moves the way
it should move. This compensates in real time for the non
linearity of the speaker/cabinet.
Reduced group delay
This is a big issue that is most often overlooked in conventional designs. The feedback comparator technology offers
great advantages in the time domain. In fact the upper bass
and the very low frequency are time aligned which means
they are reproduced at the same time resulting in extremely
accurate and musical bass reproduction.
Transducers
The Sensor controlled subwoofers are equipped with extremely long excursion 18” neodymium ultra low distortion
woofers with integrated velocity sensors that measure, compare and control cone movements. The neodymium motor
delivers extreme high magnetic flux for increased efficiency.
The 4” voice coil is 50 mm high, ensuring ultra linear excursion of 40 mm / pp at consistent magnetic force. State of
the art carbon-fiber cone ensure maximum stiffness and
low moving mass. Three aluminum shorting rings reduce
inter-modulation distortion; minimize induction variation
while reducing thermal compression. This design reduces
dramatically the distortion of a typical subwoofer at longer
excursion levels, and improves the overall sound quality and
performance characteristics of the cabinet. The sensor is in
fact an additional voice coil connected to the loudspeakers
voice coil in a high precision, magnetically shielded system.
Electronics and Cabling
The Coda Audio LINUS10 amplifiers provide integrated power and feedback loop control solution for the Sensor controlled subwoofers. The comparator’s electronic circuit loop
measures the voice coil excursion of the driver and corrects
the signal, significantly decreasing distortion. The unit is set
for flat frequency response down to 25 Hz (-6 dB).
Sensor controlled subwoofer
SC8 / SC8F
SC8 / SC8F
SC8F
Sensor controlled subwoofer
with versatile pattern control
4 x Coda Audio 18“ extreme high output subwoofer
Velocity sensors for feedback loop control
Extended frequency range down to 20Hz (-6 dB),
25 Hz (-3dB)
Ultra low distortion
Cardio, Hypercardio or Omni directional mode
Fast transient response, the upper bass and the ultra
low frequency are time aligned
Optional rigging hardware for flown or ground-stacked
arrays (SC8F)
Reduced truck space for reduced labor and transport
costs
System components: LINUS RACKs, AIRLINE LA12, SC3-F
SC8 key technologies:
The advanced design aligns several new technologies for
outstanding performance.
Feedback loop control – ultra low distortion
Sealed enclosure – superior transient and phase response
TECHNICAL SPECIFICATIONS SC8 / SC8F
Type:
Sensor controlled Cardio / Omni subwoofer
Application:
High output subwoofer
Frequency response:
20 Hz (-6 dB), 25 Hz (-3 dB) to 125 Hz
Power handling (AES / Peak): 6000 W / 24000 W
Sensitivity 1 W / 1m:*
106 dB @ 50 Hz
Maximum output peak:**
150 dB
Components:
4 x 18” neodymium ultra low distortion woofers
4” (101.6 mm) voice coil, 1500 W (AES) each
Front:
2 x 18”
Rear:
2 x 18”
Nominal impedance: Front:4 Ohm +-1, Rear: 4 Ohm +-1
Input connectors:
2 x Neutrik™ NL4MP
Velocity sensors output:
1 x Neutrik™ NC5FDL1
Suspension:
optional flying hardware: SC8F (compatible to AIRLINE LA12 Frame)
Enclosure material:
Baltic birch
Finish:
Black Polyurea coating (water restistant)
Dimensions:
1108 x 982 x 540
Net weight SC8: 122 kg
Net weight SC8F: 135 kg
* Half-space loading
** Measured with pink noise 6 dB crest factor
Versatile pattern control – Cardio or Omni mode in one cabinet. Long excursion drivers with integrated velocity sensor
Main advantages of the Feedback Loop Comparator:
Total Harmonic Distortion is reduced significantly
About 20 dB less distortion at 20 Hz compared to the cabinet without velocity sensor.
Extended Frequency response
The SC8 subwoofer provides perfectly flat response down
to 25 Hz and very high output and low distortion. No high
pass filters or equalizers are required.
Reduced group delay
The upper bass and the very low frequency are time aligned
resulting in extremely accurate and musical bass reproduction.
Directivity
The SC8 can be configured for different polar patterns: Cardio / Hypercardio or Omni directional when the cabinet is
rotated at 90°.
Applications:
The SC8 subwoofer is perfect suited not only as a subextension for AIRLINE LA12, but for general use in arenas,
houses of worship, theatres, clubs and open air.
ACCESSORIES
FR122
Compact frame for flying or ground stacking AIRLINE LA12 and/or
SC8F in cardio mode
FR002
Upgrade kit FR120 to FR122
DOT SC8
Transport dolly for up to 3 units SC8 / SC8F
CAH SC-10 Hybrid speaker and sensor system cable for SC subwoofers, 10 m
CAH SC-20 Hybrid speaker and sensor system cable for SC subwoofers, 20 m
CO SC8
Protection cover for single SC8 / SC8F
CO SC8-2 Protection cover for 2x SC8 / SC8F
touring + installation The SC8 subwoofer
Description: Sensor controlled subwoofer with versatile directional characteristic incorporating four 18” long excursion woofers in a selaed enclosure.
11
SC3-F
Sensor controlled bass extension
SC3-F
AIRLINE LA8
SC3-F
Sensor controlled Bass Extension
for AIRLINE LA12
Increases the long throw capability of AIRLINE LA12
Enhances the systems low frequency headroom
Overlaps both the low range of LA12 and the SC8 reducing the need of additional subs
Provides 15” sonic signature
Reduces investment cost
Long excursion 15” drivers with integrated velocity sensor for feedback loop control
Extended frequency range 28 - 200Hz (-6 dB)
Ultra low distortion
Fast transient response; time aligned upper & ultra low frequencies
Integrated rigging system for flown or ground-stacked arrays with AIRLINE LA12
System integration with LINUS RACKs
System components: LINUS RACKs, AIRLINE LA12, SC8
Technology
The SC3-F employs Coda Audio’s award winning sensor
controlled technology. Combining closed feedback-loop
control with large, low noise laminar flow ports, the SC3-F
offers increased output and well controlled response.
Sensor controlled technology surpasses conventional subwoofer designs by offering measurable and clearly audible
advantages in the impulse response, group delay, waterfall and the distortion domain. In fact the range 40 - 200
Hz is time aligned while the group delay increase slightly
in the range 28 - 35 Hz. The reduced group delay results
in extremely accurate and musical bass reproduction. The
sound quality is far in advance of conventional port loaded
systems.
touring + installation
12
Description
The SC3-F is NOT a subwoofer, it is a sensor controlled
bass extension system operating in the range 28 - 200 Hz
which overlaps both the low range of AIRLINE LA12 and
the SC8 subwoofer providing essential more energy and
control in the lower range of the system.
Incorporating dual 15” drivers in a compact, vented enclosure it provides a distinctive 15” signature punch to the
system.
The drivers contain an integrated velocity sensor that measures the diaphragm movement in real time, compares it
with the input audio signal and adjusts the amplifier driving
voltage and / or current, correcting any driver inaccuracy.
It is a self-optimizing, closed feedback-loop in which the
driver confirms precisely the power it needs to accurately
reproduce the original audio signal. The key advantage is a
very extended and controlled response. Any distortion produced by the driver or the enclosure is instantly corrected
by the feedback.
Transducers
The SC3-F is equipped with two extremely long excursion
15” neodymium ultra low distortion drivers with integrated
velocity sensor that measures, compares and controls
cone movements. The neodymium motor delivers extreme
high magnetic flux for increased efficiency. The 4” voice coil
is 36 mm high, ensuring ultra linear excursion of 26 mm / pp
at consistent magnetic force. State of the art carbon-fiber
cones ensure maximum stiffness and low moving mass.
Three aluminum shorting rings reduce inter-modulation distortion; minimize induction variation while reducing thermal
compression. This design dramatically reduces the distortion of a typical subwoofer at longer excursion levels, and
improves the overall sound quality and performance characteristics of the cabinet. The sensor is in fact an additional
voice coil connected to the loudspeakers voice coil in a
high precision, magnetically shielded system.
System Solution
The SC3-F is designed to work exclusively with dedicated
Coda Audio LINUS RACKs as an integrated and sensor control, amplification, network remote control and diagnostic.
The integrated solution ensures optimal performance and
protection.
Sensor controlled bass extension
SC3-F
AIRLINE LA12-B
* Half-space loading
** Measured with pink noise 6 dB crest factor
Options
Standard RAL colours and weather protection options are
available on request.
ACCESSORIES
FR-SCP-F Heavy duty frame for SC3-F or SCP-F
DOT-SC3-F Front dolly for 1x SC3-F
DOT-SC3-F Transport dolly for up to 4x SC3-F
CO-SC3-F Protection cover for 1x SC3-F
CO-SC3-F-4 Protection cover for 4x SC3-F
CAH SCP-10 Hybrid speaker and sensor cable for SCP subwoofers, 10 m
CAH SCP-20 Hybrid speaker and sensor cable for SCP subwoofers, 20 m
CAL4SP-0.75 4-Pole loudspeaker cable, 4x4 mm² 0.75m
1xNL4 Speakon®
RIGGING POSSIBILITIES
LA12 + SC3-F
SC3-F
touring + installation TECHNICAL SPECIFICATIONS SC3-F
Type:
Sensor controlled bass extension
Application:
Bass Extension for LA12
Frequency response:
28 - 200 Hz(-6 dB)
Power handling (AES / peak): 2500 W / 10000 W
Sensitivity 1 W / 1 m:*
103 dB
Maximum output peak:** 143 dB
Components:
2 x 15” neodymium ultra low distortion woofers
4” (101.6 mm) voice coil, 1250 W (AES) each
Nominal impedance:
4 Ohm, +1 / -1
Cabinets per channel:
1- 2x (LINUS10)
Input connectors:
2x NeutrikTM NL4MP (rear) + 1x NeutrikTM NL4MP (front)
Velocity sensors output:
NeutrikTM NC3MAV (rear) + NeutrikTM NC3MAV (front)
Suspension:
allows curving (0°, 2°, 5°)
Enclosure material:
Baltic birch
Finish:
Black polyurea coating (water resistant)
Dimensions:
1110 x 420 x 680 mm
Net weight:
72 kg
Applications
SC3-F flown on the top of AIRLINE LA12 array (28 - 200 Hz)
– increases the array length and enlarges the
system’s long throw capability
SC3-F flown beside the AIRLINE LA12 array (28 - 100 Hz)
optimizes the system’s horizontal directivity
SC3-F in array between AIRLINE LA12 cabinets (28 - 200
Hz) avoids balcony reflections
SC3-F ground-stack with AIRLINE LA12 (28 - 200 Hz) –
compact and powerful solution for smaller venues
13
ViRAY
Compact line array system
ViRAY
ViRAY
with DDP Dual Diaphragm
Planar-wave-driver Technology
Unique 8” coaxial mid/high planar wave driver
Dual 8” neodymium ultra low distortion cone drivers
ViCOUPLER unites all transducers to perfom as a single source
High power handling of 600 W
Variable horizontal coverage of 120° or 80° or 100° asymmetrical (40°+60°)
Vertical curving 0° to 10° variable in 1° steps
Superior sound
Integrated rigging system for flown or ground stacked arrays
Multiplex enclosure with Polyurea coating for extreme durability and water protection
Subwoofer extension with the SCV-F
System integration with LINUS RACKs
System components: LINUS RACKs, SCV-F, SC2-F
Whether it’s for live touring applications or high-end fixed
installations, ViRAY has been created to surpass and excite
the needs of both user and listener in equal measure.
Introducing “ViRAY” Coda Audio’s new compact 3-way
symmetrical line array system with DDP technology.
touring + installation
14
The DDP driver is a 2-way coaxial system employing two
concentric annular ring diaphragms. Each driver covers
a smaller frequency range for increased power handling,
high dynamic and extremely low distortion.
The larger annular midrange diaphragm covers the frequency range 600 - 6.500 Hz with a smooth, linear response.
The extended diaphragm excursion of max. +/ - 0,8 mm
results in high output and increased power handling up to
1300 W peak.
As with all Coda Audio products, the design concept of a
new product always start with the key components. ViRAY
is no different. ViRAY incorporates all new DDP (Dual Diaphragm Planar-wave-driver Technology), the purpose-built
8” coaxial mid/high planar wave driver sits at the heart of
the system.
The ultra light annular diaphragm for the high range offers
exceptional transient response with very high efficiency
from 6 to 22 kHz.
This distinctive new transducer was engineered to radiate
a true coherent planar wave front form a rectangular piston
without internal diffraction for superior dispersion control
and high fidelity sound.
The patented design is a result of extensive, dedicated research and development providing dramatic improvement
in dynamic response, clarity and transparency.
Compact line array system
The ViCOUPLER technology integrates 3 main functions:
Waveguide for the Mid/High Planar-wave-driver
Large plane screen panel to avoid backwards reflections
Phase plug for the 8” drivers for optimized loading
The ViCOUPLER unites all elements to form a complete
entity with complete balance.
Conventional design
Phase-Plug-Loaded cone drivers
Precision phase plugs are integrated into the ViCOUPLER
to ensure acoustically coherent coupling of the low range
In conventional design a backward sound wave from the
mid/high range reflects to the cone onto the low frequency
drivers. The interference between the direct radiating and
reflected waves produce comb filter response.
The ViCOUPLER ensures that sound is reflected in a
coherent manner because the dimension of the reflective
surface is large compared to the wavelength.
In fact a ViCOUPLER loaded array performs as a single
waveguide mounted in a large, flat baffle (screen) without
diffractions. When sound waves from the mid/high range
gather onto the flat surface, it generates a coherent sound
field providing uniform power response and directivity
control over a wide frequency range.
ViRAY with ViCOUPLER
providing perfectly consistent coverage down to 350Hz.
This optimizes the horizontal directivity and maximizes the
system efficiency.
touring + installation ViCOUPLER
All ViRAY drivers are loaded to a common ViCOUPLER
which combines the energy produced from all transducers
to perform as a single source, without phase destruction
achieving a coherent and uniform wavefront. In fact the
ViCOUPLER determines the horizontal on-axis and off-axis
frequency response.
ViRAY
15
ViRAY
Compact line array system
Horizontal Dispersion
To maximise precise coverage, and therefore maximize
application results, user selectable horizontal coverage of
120° / 80° or asymmetrical 100° (60°+ 40°) or (40°+ 60°)
are available, allowing for very accurate audience coverage, reduced possibility of reflections, all resulting in outstanding system intelligibility.
120° Horizontal Coverage
80° Horizontal Coverage
100° Horizontal Coverage
touring + installation
16
ViRAY’s vertical coverage is array dependent from 0° to 10°
in 1° steps. The system design allows for a vast increase
in ground stack configurations as well as in flown arrays.
ViRAY frequency response is from 55Hz to 22kHz. For extended Sub response the SCV-F Subwoofer, which utilizes
Coda Audio’s award winning Sensor Control technology,
turns the two elements into one remarkable system. The
SCV-F can be flown in curved arrays allowing full system
flown applications to be completely coherent in all respects.
SCV-F may be used in Omni or Cardioid formats. The ViRAY
is designed to work exclusively with dedicated Coda Audio
LINUS RACKs as an integrated solution for DSP control,
amplification, network remote control and diagnostic. The
integrated solution ensures optimal performance and protection.
Compact line array system
TECHNICAL SPECIFICATIONS ViRAY
Type:
Compact 3-way Bi-amplified line array module
Application:
Minimal 1, maximal 24 units line array
Frequency response:
55 Hz - 22 kHz (-3 dB)
Power handling:
Low AES / peak:
600 / 2400 W
Mid AES / peak:
150 / 1300 W
High AES / peak:
80 / 400 W
Sensitivity low 1 W / 1 m:
99 dB
Sensitivity mid/hi 1 W/1m: 112 dB
Max. SPL peak low (+6dB): 133 dB
Max. SPL peak
mid/high (+6dB):
142 dB
Dispersion horizontal:
120°, 80° or 100° (60° + 40° or 40° + 60°)
Vertical:
Array dependent, 0°-10° in 1°-steps
Components:
Low frequency:
2x 8” neodymium, water resistant cones
2” (50.8 mm) voice coil, 300 W (AES) each
Mid/High frequency:
8” coaxial neodymium Planar-wave-driver
Mid:
3.5” (90 mm) voice coil, 150 W (AES)
Hi:
1.75” (44.4 mm) voice coil, 80 W (AES)
Crossover point:
600 Hz Active, 6.300 Hz Passive
Input connectors:
2 x Neutrik™ NL4
Nominal impedance:
LF: 16 Ω (1+/1-)
MF/HF:16 Ω (2+/2-)
Enclosure shape:
Horizontal trapezoid 2x 5°
Enclosure material:
Baltic birch
Finish:
Black polyurea coating (water resistant)
Flying hardware:
Integrated
Dimensions (WxHxD):
674x242x362 mm
Net weight:
25.5 Kg
ViRAY
Application
Designed for medium size touring and installation applications the ViRAY is perfectly suited for theatres, clubs, houses of worship, corporate events and touring. Dedicated
hardware allows the ViRAY to be used as a down-fill for
AIRLINE LA12,and as a ground stack or in-fill system in its
own right.
ACCESSORIES ViRAY
FR-VR
EXBAR-VR
TILT-VR
DOW-VR-12
LP-VR
VGA
SH-VR
FC-VR
Heavy duty frame for flying or ground stacking ViRAY and SCVF
Extension bar for FR-VR frame
Tilting legs for ground stacking ViRAY/SCVF on FR-VR
Down fill ViRAY under LA12
Laser plate for FR-VR frame
Groundstack adapter for ViRAY and SCVF
Shackle for FR-VR
Flight case for 4x ViRAY
SYSTEM PERFORMANCE
Array
Horizontal Coverage
1 Enclosure
120° or 80°
2 Enclosures
120° or 80°
4 Enclosures
120° or 80°
8 Enclosures
120° or 80°
Vertical Coverage Peak Output (+6dB)
12°
133 dB
0 - 10° adjustable
139 dB
0 - 40° adjustable
145 dB
0 - 80° adjustable
151 dB
touring + installation RIGGING POSSIBILITIES ViRAY + SCV-F / SC2-F
17
SCV-F
Sensor controlled subwoofer
SCV-F
SCV-F
Compact 18” sensor controlled subwoofer
Flyable or ground stackable in cardio or omni configurations
Rigging is compatible to ViRAY
Subwoofer arrays can be curved for perfect time alignment with ViRAY
Coda amplifier comparators provide integrated power and feedback loop control solution
System components: LINUS RACKs, ViRAY, SC2-F
touring + installation
18
Coda Audio’s award winning sensor controlled technology
is extended with the compact SCV-F subwoofer. Combining
a closed feedback-loop control with large, low noise laminar flow ports the SCV-F subwoofer offers increased output
and well controlled response. This technology goes ahead
of conventional subwoofers offering measurable and clearly
audible advantages in the impulse response, group delay,
waterfall and the distortion domain. In fact the range 35 – 100
Hz is time aligned while the group delay increases slightly in
the range 25 – 35 Hz. The reduced group delay results in extremely accurate and musical bass reproduction. The sound
quality is far beyond conventional port loaded systems.
The 18” long excursion driver contains an integrated velocity sensor that measures the diaphragm movement in real
time, compares it with the input audio signal and adjusts the
amplifier driving voltage and/or current, correcting any driver
inaccuracy. It is a self-optimizing, closed feedback-loop in
which the driver confirms precisely the power it needs to accurately reproduce the original audio signal. The key advantage is a very extended and controlled response. Any distortion produced by the driver or the enclosure is instantly
corrected by the feedback.
Application
Primarily designed for integration into the ViRAY line arrays,
the SCV-F is also suited for a variety of applications in touring
and installations where compact size, high precision, deep
bass with directivity control is needed.
Sensor controlled subwoofer
SCV-F
ACCESSORIES SCV-F
Suspension:
Enclosure material:
Finish:
Dimensions (W x D x H):
Net weight:
Yes, allows curving (0°, 2,5°, 5°)
Baltic birch
Polyurea coating (water resistant)
674 x 490 x 790 mm
57 kg
* Half-space loading
**Measured with pink noise 6 dB crest factor
*** In cardio mode where channel A drives up to 4 SCV-F while channel B
drives 2 SCV
FR-VR
Heavy duty frame for flying or ground stacking ViRAY and SCV-F
EXBAR-VR Extension bar for FR-VR frame
TILT-VR
Tilting legs for ground stacking ViRAY/SCV-F on FR-VR
SH-VR
Shackle for FR-VR
DOL-SCV
Front dolly for single SCV-F
DOT-SCV
Transport dolly for up to 4 x SCV-F
CO SCV
Protection cover for single SCV-F
CO SCV-3 Protection cover for 3x SCV-F
CAH SCP-10 Hybrid speaker and sensor system cable 10m
1xNL4 Speakon® +1x 5-PolXLR-M
2xNL4 Speakon® +2x 3-PolXLR-F
CAH SCP-20 Hybrid speaker and sensor system cable 20m
1xNL4 Speakon® +1x 5-PolXLR-M
2xNL4 Speakon® +2x 3-PolXLR-F
CAL4SP-1.5 4-Pole loudspeaker cable, 4x4 mm² 1,5m
1xNL4 Speakon®
CAL4SP-0.75 4-Pole loudspeaker cable, 4x4 mm² 0.75m
1xNL4 Speakon®
RIGGING POSSIBILITIES
touring + installation TECHNICAL SPECIFICATIONS SCV-F
Type: Sensor controlled subwoofer
Application: Compact subwoofer
Frequency response: 25Hz (-6dB)
Power handling (AES / peak): 1500 W / 6000 W
Sensitivity 1 W / 1 m:* 97 dB
Maximum output peak:** 138 dB
Components: 18“ neodymium ultra low distortion woofer 4“
(101.6 mm) voice coil, 1500 W (AES) each
Nominal impedance: 8 Ohm, +1 / -1
Cabinets per channel C10: 3 or 4***
Input connectors: 2x Neutrik™ NL4MP (rear)
+ 1x Neutrik™ NL4MP (front)
Velocity sensors output: Neutrik™ NC3MAV (rear)
+ Neutrik™ NC3MAV (front)
19
SC2-F
Sensor controlled bass extension
SC2-F
SC2-F
Sensor controlled bass extension for viray
Increases the long throw capability of ViRAY
Enhances the systems low frequency headroom
Overlaps both the low range of ViRAY and the SCV/
SCP subwoofers reducing the need for additional subs
Provides 15” sonic signature
Compact 2x 15” sensor controlled bass extension
Extended frequency range 35 - 200 Hz (-6 dB)
The feedback loop control ensures extreme fast transient response and ultra low distortion
Flyable or ground stackable in cardio or omni configurations
Rigging is compatible to ViRAY and SCV-F
SC2-F arrays can be curved for perfect time alignment
with ViRAY
System integration with Coda Audio amplifier racks
System components: LINUS RACKs, ViRAY, SCV-F
Description
The SC2-F is NOT a subwoofer, it is a sensor controlled bass
extension system operating in the range 35 - 200 Hz which
overlaps both the low range of ViRAY and the SCV/SCP subwoofers providing essential more energy and control in the
lower range of the system.
Incorporating dual 15” drivers in a compact, vented enclosure
it provides a distinctive 15” signature punch to the system.
touring + installation
20
Technology
The drivers contain an integrated velocity sensor that measures the diaphragm movement in real time, compares it
with the input audio signal and adjusts the amplifier driving
voltage and/or current, correcting any driver inaccuracy. It is
a self-optimizing, closed feedback-loop in which the driver
confirms precisely the power it needs to accurately reproduce the original audio signal. The key advantage is a very
extended and controlled response. Any distortion produced
by the driver or the enclosure is instantly corrected by the
feedback. Sensor controlled technology surpasses conventional subwoofer designs by offering measurable and clearly
audible advantages in the impulse response, group delay,
waterfall and the distortion domain. The reduced group delay results in extremely accurate and musical bass reproduction. The sound quality is far in advance of conventional port
loaded systems.
Transducers
The SC2-F is equipped with two extremely long excursion
15” neodymium ultra low distortion drivers with integrated
velocity sensor that measures, compares and controls cone
movements. The neodymium motor delivers extreme high
magnetic flux for increased efficiency. The 4” voice coil is
36 mm high, ensuring ultra linear excursion of 26 mm / pp
at consistent magnetic force. State-of-the-art carbon fiber
cones ensure maximum stiffness and low moving mass.
Three aluminum shorting rings reduce inter-modulation distortion, minimizing induction variation whilst reducing thermal compression. This design reduces dramatically the distortion of a typical subwoofer at longer excursion levels, and
improves the overall sound quality and performance characteristics of the cabinet. The sensor is in fact an additional
voice coil connected to the loudspeakers voice coil in a high
precision, magnetically shielded system.
System solution
The SC2-F is designed to work exclusively with dedicated
Coda Audio amplifier racks as an integrated solution for
DSP and sensor control, amplification, network remote control and diagnostic. The integrated solution ensures optimal
performance and protection.
Sensor controlled bass extension
TECHNICAL SPECIFICATIONS SC2-F
Type: Sensor controlled bass extension
Application: Bass Extension for ViRAY
Frequency response: 35 - 200 Hz (-6 dB)
Power handling (AES / peak): 2500 W / 10000 W
Sensitivity 1 W / 1 m:* 103 dB
Maximum output peak:** 143 dB
Components: 2x 15” neodymium ultra low distortion woofers
4” (101.6 mm) voice coil, 1250 W (AES) each
Nominal impedance: 4 Ohm, +1 / -1
Cabinets per channel: 1- 2x (LINUS10), 1x (LINUS8)
Input connectors: 2x Neutrik™ NL4MP (rear) + 1x Neutrik™ NL4MP (front)
Velocity sensors output: Neutrik™ NC3MAV (rear) + Neutrik™
NC3MAV (front)
Suspension: allows curving (0°, 2.5°, 5°)
Enclosure material: Baltic birch
Finish: Polyurea black coating (water resistant)
Dimensions: 674 x 490 x 790 mm
Net weight: 70 kg
Options:
Standard RAL colours and weather protection options are
available on request.
ACCESSORIES SC2-F
FR-VR
Heavy duty frame for flying ViRAY and SC2-F
EXBAR-VR Extension bar for FR-VR frame
SH-VR
Shackle for FR-VR
DOL-SCV Front dolly for single SC2-F
DOT-SCV Transport dolly for up to 4 x SC2-F
CO SCV
Protection cover for single SC2-F
CO SCV-3 Protection cover for 3x SC2-F
CAH SCP-10 Hybrid speaker and sensor system cable 10m
1xNL4 Speakon® +1x 5-PolXLR-M
2xNL4 Speakon® +2x 3-PolXLR-F
CAH SCP-20 Hybrid speaker and sensor system cable 20m
1xNL4 Speakon® +1x 5-PolXLR-M
2xNL4 Speakon® +2x 3-PolXLR-F
CAL4SP-1.5 4-Pole loudspeaker cable, 4x4 mm² 1,5m
1xNL4 Speakon®
CAL4SP-0.754-Pole loudspeaker cable, 4x4 mm² 0.75m
1xNL4 Speakon®
RIGGING POSSIBILITIES
* Half-space loading
** Measured with pink noise 6 dB crest factor
touring + installation Applications:
SC2-F flown on the top of ViRAY array (35 - 200 Hz) - increases the array length and enlarges the system long throw
capability
SC2-F flown beside or behind the ViRAY array (35 - 100 Hz)
- provides a distinctive punch to the system
SC2-F in array between ViRAY cabinets (35 - 200 Hz) - avoids
balcony reflections
SC2-F ground-stack with ViRAY (35 - 200 Hz) - compact and
powerful solution for smaller venues
SC2-F
21
Software
Coda EASE Focus II Software
Coda EASE Focus II Software
touring + installation
22
3D modeling of direct sound, displayed in horizontal and vertical cutting planes
Full support for EASE GLL files and data exchange
with EASE
Capability to use multiple line array systems in a
single project
Virtual equalizer for tuning a line array in the simulation
Support for digitally steered columns and other
configurable loudspeakers; this requires an additional proprietary DLL that can provide e.g. beam steering filters
Full frequency range from 20 Hz to 20 kHz
High accuracy due to high internal data resolution and GLL data format
Support for multiple languages: German, English, Spanish, Italian, Portuguese
Coda Audio EASE Focus II is a three-dimensional, acoustic
simulation software for the configuration and modeling of
line array systems and of adjustable loudspeakers, such
as digitally steered columns. EASE Focus II is free for the
end user.
Great efforts have been made to keep EASE Focus II intuitive and easy-to-use while introducing three-dimensional
coordinates and many new features. It can be considered
a tool for both the end user, who needs to set up the sound
system for a show, as well as for the R&D engineer, who
is interested in the acoustic qualities of the array design.
EASE Focus II is the optimal tool for easy and quick prediction of the sound system performance in a given venue.
Compared to conventional aiming software the applicability
of EASE Focus II is much larger. It is not fixed to a single
loudspeaker product.
In EASE Focus II, each line array or column loudspeaker is
described by a so-called system definition which contains
the mechanical, electronic and acoustic properties of the
loudspeaker system. All available GLL-files for Coda Audio
speakers can be downloaded from our website.
CoRAY-Series
2-way line source column system
CoRAY4 is an extremely advanced 2-way line source solution for all highly reverberant environments. CoRAY4 has
been designed to provide exacting results in situation
where the natural environment is particularly unforgiving to
normal amplified sound reinforcement solutions.
touring
Applying true Coda Audio line array technology, which is
available in our large touring products, into an ultra compact size, passive column loudspeaker, filling the gap between larger, more expensive line arrays and point source
systems, offering high quality solutions for acoustically difficult environments.
23
CoRAY-Series Line source column systems
CoRAY
4
CoRAY4
CoRAY4
2-way line source column system
2-way ultra compact line source column system
High power handling of 700 W
Dual 4” neodymium planar wave drivers
Four 5” ultra low distortion cone speakers
Asymmetrical vertical coverage of 12° (1° up, 11° down)
Variable horizontal dispersion of 120° or 60° or
asymmetrical 90°
Integrated CMS (Coda Mobile Suspension),
optimized for mobile use
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G15-SUB, G18-SUB, SC4, CoRAY4L
Description:
The CoRAY4 is an ultra compact two-way line array column, designed for small to mid-sized venues with difficult
acoustic environments where compact size, high fidelity
sound and outstanding intelligibility are required.
The cabinet contains four 5” ultra low distortion cone
speakers and two 4” HF neodymium planar wave drivers.
Versatility:
The possibility to change the horizontal coverage 120°, 60°
or asymmetrical 90° (60°+30°) or (30°+60°) allows precise
audience coverage, reduced reflections for better intelligibility. The asymmetrical vertical coverage focuses the
sound to the listeners considerably reducing reflections
from the ceiling.
touring
24
Two CoRAY4s can be allied top on top as CoRAY4 Twin,
to create consistent symmetrical vertical coverage of 24°
without interferences between the cabinets while the horizontal coverage can be modified from 120° to 60° or 120°
for short throw and 60° for long throw sending more energy
in the far field. In this configuration the system acoustical
output will increase by 6 dB and narrow vertical control at
low frequency for extending the long throw capabilities of
the system.
System Solutions:
IMPORTANT: The CoRAY4 is NOT designed to work without dedicated system controller and therefore should be
use only with proper Coda Audio controllers. The controller
will equalize the system and will ensure limiter protection.
Digital signal processing is available in Coda Audio System
Amplifiers and standalone Coda Audio Digital Controllers.
The C5 is an integrated solution for DSP control and amplification of CoRAY4. It provides 4 inputs and 4 amplifier outputs
as well as network remote control and diagnostic. Presets for
CoRAY4 are available. An optional G15-SUB or G18-SUB can
be added for increased low frequency response.
Options:
Standard RAL colours and weather protection options are
available on request.
Applications include worship, live music, political events,
conferences, corporate events, delay line for AIRLINE LA8
or Lay line for line arrays.
Line source column systems
CoRAY-Series
CoRAY4 L
CoRAY4L
Low frequency extension for CoRAY4
The CoRAY4L is an ultra compact low frequency extension
for the CoRAY4. The cabinet contains four 5“ ultra low distortion cone speakers and features the same CMS (Coda
Mobile Suspension) as the CoRAY4 for an integrated fixing
solution.
TECHNICAL SPECIFICATIONS CoRAY4
Type:
2-way passive column loudspeaker
Frequency response:
80 Hz - 20 kHz (-3 dB)
Power handling AES:
700 W
Peak power:
2800 W
Sensitivity:
97 dB
Max. SPL peak:
131 dB
Dispersion horizontal:
Symmetrical 120° or 60° or asymmetrical 90° (60°+30°)
Vertical:
12° (1° up, 11° down)
Components:
Low frequency:
4x 5” Woofer, 1.5” (38mm) voice coil,
170 W (AES)
High frequency:
2x 4” Neodymium planar wave drivers, 1.75”
(44.4 mm) voice coil, 80 W (AES)
Crossover point:
1300 Hz passive
Nominal impedance:
4Ω
Input connectors:
2x Neutrik™ NL4MP
Suspension:
CMS (Coda Mobile Suspension)
M6 threaded points for use of optional U-bracket
Enclosure material:
Birch plywood
Finish:
Black Polyurea coating (water resistant)
Dimensions (W x H x D):
152 x 758 x 214 mm
Net weight:
15.7 kg
Weatherproof/colour version: Optional
* Subject to technical alteration without prior notice
Four 5“ ultra low distortion cone speakers
Integrated CMS (Coda Mobile Suspension)
optimized for mobile use
ACCESSORIES
CF4
Flying frame
CA4
Twin adaptor for 2x CoRAY4
C4VCU-bracket
C4WM
Wall mount bracket
TV4
TV spigot for CF4 flying frame
TV4C
Clamp for TV spigot
19674
Speaker tilt connector 0°-15°
24481
Wall mount for CoRAY4 Twin
COB-CoRAY4 Transportatoion bag for single CoRAY4
TECHNICAL SPECIFICATIONS CoRAY4L
Type:
Low frequency extension for CoRAY4
Frequency response:
80 Hz - 1300 Hz (-3 dB)
Power handling AES:
700 W
Peak power:
2800 W
Sensitivity:
97 dB
Max. SPL peak:
131 dB
Components:
4x 5” woofer, 1.5” (38 mm) voice coil, 170 W (AES)
Nominal impedance:
4Ω
Input connectors:
2x Neutrik™ NL4MP
Suspension:
CMS (Coda Mobile Suspension)
M6 threaded points for use of optional U-bracket
Enclosure material:
Birch plywood
Finish:
Black Polyurea coating (water resistant)
Dimensions (W x H x D): 152 x 758 x 214 mm
Net weight
13.2 kg
Weatherproof version: Optional
touring
Ultra compact low frequency extension for CoRAY4
High Power handling of 700W
25
SCP /SCP-F
Sensor controlled subwoofer
SCP / SCP-F
SCP
High output sensor controlled subwoofer
2 x 18” extreme high excursion woofers
The integrated velocity sensor measures the voice
coil movement
Extended frequency range to 25 Hz (-6 dB)
Omni or cardioid configurations
Ultra low distortion
Fast transient response, the upper and the ultra
low frequency are time aligned
Optional rigging hardware for flown or ground-stacked arrays (SCP-F)
System components: LINUS RACKs, LINUS DSP-amplifier, CoRAY4, G700-Series
touring + installation
26
The Coda Audio award winning sensor controlled technoogy is extended with the SCP-Series subwoofers. Combining
a closed feedback-loop control with large, low noise laminar flow ports the SCP subwoofer offers increased output
and well controlled response. This technology surpasses
that of conventional subwoofers offering measurable and
clearly audible advantages in the impulse response, group
delay, waterfall and the distortion domain. In fact the range
35 – 100 Hz is time aligned while the group delay increases
slightly in the range 25 – 35 Hz. The reduced group delay
results in extremely accurate and musical bass reproduction. The sound quality is far beyond that of conventional
port loaded systems.
The SCP is a sensor controlled subwoofer incorporating
double 18” woofers in a compact, vented enclosure. The
drivers contain an integrated velocity sensor that measures
the diaphragm movement in real time, compares it with the
input audio signal and adjusts the amplifier driving voltage
and/or current, correcting any driver inaccuracy. It is a selfoptimizing, closed feedback-loop in which the driver confirms
precisely the power it needs to accurately reproduce the original audio signal. The key advantage is a very extended and
ACCESSORIES
DOT SCP
Transport dolly for up to 3 units SCP
DOT SCP-F Transport dolly for up to 3 units SCP-F
CAH SCP-10 Hybrid speaker and sensor cable for SCP subwoofers, 10 m
CAH SCP-20 Hybrid speaker and sensor cable for SCP subwoofers, 20 m
CO SCP-1 Protection cover for single SCP
CO SCP-2 Protection cover for 2 units SCP
controlled response. Any distortion produced by the driver or
the enclosure is instantly corrected by the feedback.
Application: Typical Applications include touring sound, theaters, houses of worship, dance clubs and live sound venues.
TECHNICAL SPECIFICATIONS SCP / SCP-F
Type: Sensor controlled subwoofer
Application: High output subwoofer
Frequency response: 25 Hz (-3 dB) to 120 Hz
Power handling (AES / peak): 3000 W / 12000 W
Sensitivity 1 W / 1 m:* 103 dB
Maximum output peak:** 144 dB
Components: 2 x 18” neodymium
ultra low
distortion
woofers,
CO SCPF-1
Protection
cover
for
4” (101.6 mm) voicesingle
coil, 1500
SCP-FW (AES) each
Nominal impedance: 4 Ohm, +1 / -1
Input connectors:
SCP: 2x Neutrik™ NL4MP
SCP-F: 2x Neutrik™ NL4MP (rear), 1x Neutrik™ NL4MP (front)
Velocity sensors output:
SCP: 1x Neutrik™ NC3MAV
SCP-F: 1x Neutrik™ NC3MAV (rear), 1x Neutrik™ NC3MAV (front)
Suspension: optional flying hardware: SCP-F
Enclosure material: Baltic birch
Finish:
Black Polyurea coating (water restistant)
Dimensions (WxDxH):
SCP: 1190 x 790 x 547 mm
SCP-F: 1108 x 800 x 550 mm
(1108 x 816 x 557 incl. hardware)
Net weight: 95 kg
* Half-space loading
**Measured with pink noise 6 dB crest factor
Sensor controlled subwoofer
SC4
SC4
SC4
Sensor controlled subwoofer
2 x Coda Audio 18” extreme high output subwoofer
Velocity sensors for feedback loop control
Extended frequency range down to 20 Hz (-6 dB),
25 Hz (-3 dB)
Ultra low distortion
Fast transient response, the upper and the ultra low frequency are time aligned
Compact size for reduced labor and transport costs
Optional rigging hardware
System components: LINUS RACKs, LINUS DSP-amplifier, CoRAY4, G700-Series
The SC4 subwoofer
Sensor controlled subwoofer incorporating double 18“
long excursion woofers in a sealed enclosure.
The SC4 subwoofer provides perfectly flat frequency response down to 20 Hz (-6 dB) and very high output and
low distortion.
SC4 key technologies
•The advanced design aligns several new technologies
for outstanding performance.
•Feedback loop control – ultra low distortion, very extended and controlled response
•Long excursion drivers with integrated velocity sensor
The Feedback loop controlled subwoofer has clear advantages over conventional amplifier / subwoofer solutions
when it comes to sonic performance, output and size.
*Half-space loading
**Measured with pink noise 6 dB crest factor
Application
The SC4 is suited for a variety of applications in touring and
installations where high precision, deep bass is needed.
It is perfectly suited for use in arenas, houses of worship,
theatres and clubs.
ACCESSORIES
DOT SC4
Transport dolly for 2 units SC4
CAH SC-10Hybrid speaker and sensor system cable for SC subwoofers, 10 m
CAH SC-20 Hybrid speaker and sensor system cable for SC subwoofers, 20 m
CAY-6
Sensor cable adapter for SC4
touring + installation TECHNICAL SPECIFICATIONS SC4
Type:
Sensor controlled subwoofer
Application:
High output subwoofer
Frequency response:
20 Hz (-6 dB) 25 Hz (-3 dB) to 150 Hz
Power handling (AES / peak):3000 W / 12000 W
Sensitivity 1 W / 1 m:*
103 dB @ 50 Hz
Maximum output peak:** 144 dB
Components:
2 x 18” neodymium ultra low distortion woofers,
4” (101.6 mm) voice coil, 1500 W (AES) each
Nominal impedance:
4 Ohm, +1 / -1
Input connectors:
2 x Neutrik™ NL4MP
Velocity sensors output: 1 x Neutrik™ NC3MAV
Suspension:Optional
Enclosure material:
Black Polyurea coating (water restistant)
Finish:
Textured black Paint
Dimensions:
760 x 545 x 780 mm
Net weight:
69 kg
27
CUE-Series
3-way high output ultra low profile stage monitor series
The CUE-Series 3-way high output ultra low profile stage
monitors feature a triaxial design, engineered without compromise to provide a true one point source.
The advanced design aligns the acoustical centers of the
transducers to produce a single point source. This unique
loudspeaker technology provides a coherent wave front
without hot spots. Precise directivity ensures uniform coverage with perfect time alignment between the components.
touring + installation The CUE Series is a family of dedicated stage monitors,
each with its own group of application areas. The design
strategy allows Coda Audio to deliver a, “no compromise”
approach to fulfilling a large number of real world Monitoring requirements. In addition the sonic signature of the
series means they can all be used together as and when
required.
28
Stage monitors
CUE-Series
CUE ONE
CUE ONE
3-way high output ultra low profile
stage monitor
3-way coherent point source technology
Double 12” and 1.4” coax driver
Asymmetrical vertical coverage 55° + 40°
Outstanding audio quality
Ultra low feedback
Ultra low profile design
Integrated hardware for increased dispersion
Powerful low frequency response
Mechanically durable
Discrete cables connection
Passive or bi-amp operation
Light weight
The cabinet contains double 12” extremely high power
neodymium woofers and a 1.4” coaxial compression driver
loaded by an asymmetrical 60° x 55°+40° elliptical waveguide.
The CUE ONE has the power handling and power output to
suite the largest of monitoring applications, while still being
discreet and low profile in physical form. Unique cabling
format and integrated hardware for adjusting dispersion
along with a rotatable HF wave guide provide users total
flexibility of use. The CUE ONE’s design and the technologies used, truly allow monitor engineers to be creative with
their on stage audio designs, bring that same level of Audio
attention to be found at the FOH to the stage.
ACCESSORIES
A1HC
Horizontal U-bracket for CUE ONE
A1WM
Wall mount bracket for CUE ONE
FC1CUE
Flight case for 2x CUE ONE
CFA
Flying Adapter for CUE-Series
CSF
Stand fitting for CUE-Series
TECHNICAL SPECIFICATIONS CUE ONE
Type:
3-way high output stage monitor
Application:
Stage monitor
Frequency response: 54 Hz - 21 kHz (- 3 dB)
Power handling AES: 2000 W
Peak Power:
8000 W
Sensitivity:*
104 dB
Max. SPL peak:
143 dB
Dispersion:
Horizontal:60°
Vertical:
55° + 40°
Components:
Low frequency:
2 x 12” neodymium woofer, 4” (101.6 mm) voice coil,
1000 W
High frequency:
1.4” neodymium coaxial driver 3.5” (90 mm), + 1.75”
(44.4 mm) voice coil, 150 W + 80 W
Crossover:
750 Hz passive or bi-amp (internal connector), 6.3 kHz
passive
Nominal impedance: 4 Ohm
Input connectors:
2x Neutrik™ NL4MP
Enclosure material: 15 / 18 mm plywood
Finish:
Textured black paint
Dimensions:
670 x 322 x 627 mm
Net weight:
32 kg
touring + installation System components: LINUS RACKs, LINUS DSP-amplifiers
* Half-space loading
29
CUE-Series
Stage monitors
CUE TWO
CUE TWO
3-way high output ultra low profile
stage monitor
3-way coherent point source technology
15” / 1.4” triaxial transducer
60° x 90° elliptical waveguide
Outstanding audio quality
Ultra low feedback
Integrated hardware for increased dispersion
Powerful low frequency response
Mechanically durable
Discrete cables connection
Passive or bi-amp operation
Light weight
System components: LINUS RACKs, LINUS DSP-amplifiers
touring + installation
30
TECHNICAL SPECIFICATIONS CUE TWO
Type:
3-way high output stage monitor
Application:
Stage monitor
Frequency response: 54 Hz - 21 kHz (- 3 dB)
Power handling AES: 1000 W
Peak Power:
4000 W
Sensitivity:*
103 dB
Max. SPL peak:
139 dB
Dispersion:
Horizontal:60°
Vertical:90°
Components:
Low frequency:
15” neodymium woofer 4” (101.6 mm) voice coil,
1000 W
High frequency:
1.4” neodymium coaxial driver 3.5” (90 mm) + 1.75” (44.4 mm) voice coil, 150 W + 80 W
Crossover:
750 Hz passive or bi-amp (internal connector), 6.3 kHz passive
Nominal impedance: 8 Ohm
Input connectors:
2x Neutrik TM NL4MP
Enclosure material: 15 / 18 mm plywood
Finish:
Textured black paint
Dimensions:
540 x 379 x 574 mm
Net weight:
29 kg
Weatherproof version: Optional
* Half-space loading
The cabinet contains a triaxial transducer incorporating an
extremely high power 15” neodymium cone driver and a
1.4” coaxial compression driver concentrically mounted to
the woofer and loaded by a 60° x 90° elliptical waveguide.
The CUE TWO has the same unique physical characteristics to be found across the series when it comes to cable
connection and variable dispersion hardware, while being
based on a true trixial transducer design with a symmetrical
HF 60 x 90 wave guide. The resulting total coherence of the
unit delivers both power and a purity of sonic reproduction
that is world class.
ACCESSORIES
A2HC
Horizontal U-bracket for CUE TWO
A2WM
Wall mount bracket for CUE TWO
FC2CUE
Flight case for 2x CUE TWO
CFA
Flying Adapter for CUE-Series
CSF
Stand fitting for CUE-Series
Stage monitors
CUE-Series
CUE FOUR
CUE FOUR
3-way high output ultra low profile
stage monitor
3-way coherent point source technology
Double 8” and 1.4” coax driver
Asymmetrical vertical coverage 55°+ 40°
Outstanding audio quality
Ultra low feedback
Ultra low profile design
Integrated hardware for increased dispersion
Mechanically durable
Discrete cable connection
Passive or bi-amp operation
Light weight
The cabinet contains double 8” high power neodymium
woofers and a 1.4” coaxial compression driver loaded by
an asymmetrical 60° x 55°+40° elliptical waveguide.
The CUE FOUR may be the smallest in the family, but don’t
let that fool you; once again the CUE FOUR has all the inherent technologies to be found in the series in a smaller
footprint. This reduction in physical size and weight makes
the CUE FOUR particularly useful in applications where restrictions in placement play their part. This is a big, little
monitor, delivers the same high quality audio reproduction
and coherency as the CUE ONE and the CUE TWO with
the added advantage of being small, low profile and light
weight. The CUE FOUR has wall mounting accessories to
assist placement in specific applications such; TV studios,
Houses of Worship and orchestras.
ACCESSORIES
A4HC
Horizontal U-bracket for CUE FOUR
A4WM
Wall mount bracket for CUE FOUR
FC4CUE
Flight case for 4x CUE FOUR
CFA
Flying Adapter for CUE-Series
CSF
Stand fitting for CUE-Series
TECHNICAL SPECIFICATIONS CUE FOUR
Type:
3-way high output stage monitor
Application:
Stage monitor
Frequency response: 54 Hz - 21 kHz (- 3 dB)
Power handling AES: 500 W
Peak Power:
2000 W
Sensitivity:*
104 dB
Max. SPL peak:
137 dB
Dispersion:
Horizontal:60°
Vertical:
55° + 40°
Components:
Low frequency:
2 x 8“ neodymium woofers, 2” (52 mm) voice coil,
250 W (AES) each
High frequency:
1.4“ neodymium coaxial driver 3.5“ (90 mm) + 1.75“
(44.4 mm) voice coil, 150 W + 80 W
Crossover:
750 Hz passive or bi-amp (internal connector), 6.3 kHz
passive
Nominal impedance: 8 Ohm
Input connectors:
2x Neutrik™ NL4MP
Enclosure material: 15 / 18 mm plywood
Finish:
Textured black paint
Dimensions:
545 x 450 x 272 mm
Net weight:
19 kg
Weatherproof version: Optional
* Half-space loading
touring + installation System components: LINUS RACKs, LINUS DSP-amplifiers
31
G-Series
Full range multipurpoise systems
G-Series
The G-Series range, compact versatile full range systems
that incorporate the best driver and waveguide technology
available today.
Rotatable waveguides
The newly designed elliptical waveguides offer exceptional
directivity control without internal diffraction and resonances. Going beyond the classical horn theory the new
design significantly reduces horn resonances and audibly
improves the sound quality.
installation + portable
32
Audiophile grade neodymium HF drivers
All compression drivers utilise patented annular diaphragm
design and contain CuCup technology to reduce intermodulation distortion IMD. The neodymium cone drivers include
triple aluminum demodulating rings for ultra low distortion
and increased power handling.
Ultra low distortion neodymium cone drivers
The long excursion cone drivers contain high flux, linear
motors with triple demodulation rings for ultra low distortion
and increased power handling.
System integration
Although the G-Series loudspeakers incorporate dedicated
passive crossovers ensuring linear frequency and phase
response allowing them to work without additional processing, the use of Coda Audio’s digital controllers dramatically
improves the overall system performance offering protection and frequency response optimization either in full
range mode or in stage monitor applications or in combination with subwoofers.
Accessories and Hardware
Optimized for installation and touring the G-Series features
M6 flying points for optional u-brackets to mount them to
walls or ceilings as well as special hardware kits for almost
every kind of installation or touring application.
Other Features:
• Best sound quality
• Maximum output and reliability in their class
• Competitive price
Full range multipurpoise systems
G-Series
G300-Series – 2-way compact full-range systems
• Extreme compact multidesign enclosure
• Wide coverage angles
• 1“ patented compression driver
• Multiple fly-points for easy hanging
• Extended accessories range for both touring and
installation
Superior sound quality designed for near field applications
containing the finest drivers and a wide dispersion symmetrical wood waveguides for uncoloured high fidelity sound.
The systems provide a smart solution for installations,
bands, small clubs, 5.1 surround and corporate events or
as a stage monitor.
G500-Series – medium output 2-way full-range systems
• Superb quality patented annular diaphragm
• 1” neodymium HF drivers
• Ultra low distortion woofers with 3” VC and triple
demodulation rings
• Rotatable elliptical waveguides
• M6 suspension points
• Versatile enclosures
• Extended accessories range for both touring and
installation
These 2-way systems are rated at 600 W continuous power
and are best suited for sound reinforcement applications
where the best sound quality at moderate levels is required.
The G500-Series incorporates 12” and 15” neodymium
drivers with 3” voice coil and a 1” annular diaphragm compression driver mounted on an elliptical waveguide. Offering the very best performance / cost ratio the G500-Series
is suited for installations, bands, stage monitoring, DJs and
clubs.
• 3-way systems where the mid and high frequency are radiated from one point
• Unique patented 1.4” coaxial neodymium driver
• Ultra low distortion woofers with 4” VC and triple
demodulation rings
• Internal selector for passive or bi-amp operation
• Rotatable elliptical waveguides
• M6 suspension points
• Versatile enclosures
• Extended accessories range for both touring and
installation
The G700-Series incorporates 12” and 15” neodymium
drivers with 4” voice coil and 1.4” neodymium coaxial compression drivers mounted on elliptical waveguides. Rated
at 1000 W continuous power handling the 700-Series is
suited for touring and installation applications where the
highest output and outstanding sound quality are required.
At the heart of the G700-Series is the patented 1.4” neodymium coaxial compression driver. An extremely wide
and flat frequency response is achieved at high sensitivity due to the unique construction. The advanced design
aligns the acoustical centers of the mid and high frequency
range to produce a single point source. This unique loudspeaker technology provides a coherent wave front without
hot spots. Precise directivity ensures uniform coverage with
perfect time alignment between the components.
installation + portable G700-Series – High output 3-way full-range systems
33
G-Series
Compact 2-way full range system
G308 / G308F
G308 / G308F
Compact 2-way full range system
Extreme compact multidesign enclosure
Wide coverage angles
1“ patented compression driver
Multiple fly-points for easy hanging
Extended accessories range for both touring
and installation
G308F features integrated flange adapter
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G15-SUB, G18-SUB
The Coda Audio G308 is a compact versatile full range
2-way loudspeaker system that features an 8” ultra low distortion low frequency driver and a 1” compression driver
coupled to a 90° conical wood waveguide.
The G308 incorporates a multidesign enclosure fitted with
M6 flying points enabling it to be used horizontal, vertical
or as a floor monitor.
installation + portable
34
ACCESSORIES
FC308
Flight case for 2x G308 / G308F
A8VG
Vertical U-bracket for G308 / G308F
A8HG
Horizontal U-bracket for G308 / G308F
GFA
Flying Adapter for G308
GSF
Stand fitting for G308
M6
Ring for rigging G308 / G308F
A68620
Truss Clamp for G308 / G308F
TECHNICAL SPECIFICATIONS G308
Type:
2-way full range system, multidesign enclosure
Application:
High quality short throw
Frequency response: 70 Hz - 30 kHz (-3 dB)
Power handling AES: 220 W
Program power:
440 W
Peak power:
880 W
Sensitivity:
94.5 dB
Max. SPL peak:
124 dB
Dispersion:
90° conical
Components:
Low frequency:
8” ultra low distortion cone driver, 2“ voice coil
High frequency:
1” compression driver, 1.5“ voice coil
Crossover point:
1900 Hz
Nominal impedance: 8 Ohm
Input connectors:
2x Neutrik™ NL4MP
Enclosure material: Birch plywood
Suspension:
2x M6 threaded points
Flange adapter:
G308F only
Dimensions (WxHxD):230 x 471 x 260 mm
Net weight:
9.5 kg
Human EQ-switch
2-way full range system
G-Series
G512-96
G512-96
2-way compact full range multidesign
2-way compact versatile full range system
High power handling of 600 W
Neodymium drivers for light weight
90° x 60° rotatable elliptical waveguide
Designed for both PA and stage monitoring
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G15-SUB, G18-SUB
ACCESSORIES
A12VG Vertical U-bracket for G512-96
A12HG Horizontal U-bracket for G512-96
24481 Wall Mount for G512-96
GFA Flying Adapter for G512-96
M6 Ringfor rigging G512-96
AK2G Array kit for 2 x G512-96
installation + portable TECHNICAL SPECIFICATIONS G512-96
Type:
2-way full range system, multidesign enclosure
Application:
High quality short throw or stage monitor
Frequency response: 60 Hz – 21 kHz (-3 dB)
Power handling AES: 600 W
Peak power:
2400 W
Sensitivity:
98 dB
Max. SPL peak:
132 dB
Dispersion:
90°x 60°
Components:
Low frequency:
12” neodymium woofer, 3” (77 mm) voice coil,
600 W (AES)
High frequency:
1” neodymium compression driver, 1.75” (44.4 mm)
VC, 80 W (AES)
Crossover point:
1300 Hz passive
Nominal impedance: 8 Ω
Input connectors:
2 x Neutrik™ NL4MP
Suspension:
M6 threaded points for use of optional U-bracket
Enclosure material: 15/18 mm birch plywood
Finish:
Textured black paint
Dimensions (WxHxD):348 x 630 x 320 mm
Net weight:
16 kg
Weatherproof version:Optional
The G512-96 is a versatile full range two-way loudspeaker
system that features ultra low distortion 12” neodymium
woofer and a 1” neodymium compression driver coupled
to a 90° x 60° rotatable elliptical waveguide. The G512 incorporates a multi design enclosure fitted with M6 threaded points for use with an optional U-bracket and includes
an integral top hat. Applications include clubs, corporate
events, FOH, stage monitor and band PA.
35
G-Series
2-way full range system
G515-96
G515-96
2-way high power full range multidesign
2-way compact versatile full range system
High power handling of 600 W
Neodymium drivers for light weight
90° x 60° rotatable elliptical waveguide
Designed for both PA and stage monitoring
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G15-SUB, G18-SUB
The G515-96 is a versatile full range two-way loudspeaker
system that features ultra low distortion 15” neodymium
woofer and a 1” neodymium compression driver coupled
to a 90° x 60° rotatable elliptical waveguide. The G515 incorporates a multidesign enclosure fitted with M6 threaded
points for use with an optional U-bracket and includes
an integral top hat.Applications include clubs, corporate
events, FOH, stage monitor and band PA.
installation + portable
36
ACCESSORIES
A15VG Vertical U-bracket for G515-96
A15HG Horizontal U-bracket for G515-96
24481 Wall Mount for G515-96
GFA Flying Adapter for G515-96
M6 Ringfor rigging G515-96
AK2G Array kit for 2 x G515-96
TECHNICAL SPECIFICATIONS G515-96
Type:
2-way full range system, multidesign enclosure
Application:
High quality short throw or stage monitor
Frequency response: 50 Hz - 21 kHz (-3dB)
Power handling AES: 600 W
Peak power:
2400 W
Sensitivity:
98 dB
Max. SPL peak:
132 dB
Dispersion:
90°x 60°
Components:
Low frequency:
15” neodymium woofer, 3” (77 mm) voice coil, 600W (AES)
High frequency:
1” neodymium compression driver,
1.75” (44.4 mm) voice coil, 80W (AES)
Crossover point:
1200 Hz passive
Nominal impedance: 8 Ω
Input connectors:
2 x Neutrik™ NL4MP
Suspension:
M6 threaded points for use of optional U-bracket
Enclosure material: 15 mm birch plywood
Finish:
Textured black paint
Dimensions (WxHxD):420 x 700 x 370 mm
Net weight:
17.5 kg
Weatherproof version:Optional
High output 3-way full range system
G-Series
G712-96
G712-96
3-way compact full range multidesign
3-way high output versatile full range system
Unique 1,4” coaxial neodymium driver
90° x 60° rotatable elliptical waveguide
12” neodymium ultra low distortion woofer
Passive or bi-amplified operation
Designed for fixed installation, touring and stage monitoring
System components: LINUS RACKs, DSP-amplifiers, G18-SUB, SCP, SC4
ACCESSORIES
A12VG Vertical U-bracket for G712-96
A12HG Horizontal U-bracket for G712-96
24481 Wall Mount for G712-96
GFA Flying Adapter for G712-96
M6 Ringfor rigging G712-96
AK2G Array kit for 2 x G712-96
installation + portable TECHNICAL SPECIFICATIONS G712-96
Type:
3-way high power full range system, multidesign
enclosure
Application:
High output short/medium throw or stage monitor
Frequency response: 60 Hz – 21 kHz (-3 dB)
Power handling AES: 1000 W
Peak power:
4000 W
Sensitivity:
98 dB
Max. SPL peak:
134 dB
Dispersion:
90°x 60°
Components:
Low frequency:
12” neodymium woofer, 4” (101.6 mm) voice coil, 1000 W
(AES)
High frequency:
1.4” neodymium coaxial driver, 3.5” (90 mm) +
1.75” (44.4 mm) voice coil, 150 W + 80 W (AES)
Crossover point:
750 Hz, 6.3 kHz passive
Nominal impedance: 8 Ω
Input connectors:
2 x Neutrik™ NL4MP
Suspension:
6 x M6 threaded points
Enclosure material: 15 / 18 mm Baltic birch plywood
Finish:
Textured black paint (all RAL-colours optional)
Dimensions (WxHxD): 348 x 630 x 320 mm
Net weight:
21.5 kg
Weatherproof version: Optional
The Coda Audio G712-96 is a versatile full range 3-way loudspeaker system that features a high power 12” neodymium
woofer and a 1.4” coaxial neodymium driver coupled to a rotatable 90° x 60° elliptical waveguide. As a 3-way system the
G712-96 may be driven passively or with bi-amplification to
provide extremely high acoustic output. The Coda Audio G71296 is a powerful solution for front of house touring, installed PA
for theatres, clubs and corporate events or as a stage monitor.
37
G-Series
High output 3-way full range system
G715-96
G715-96
3-way compact full range multidesign
3-way high output versatile full range system
Unique 1,4” coaxial neodymium driver
90° x 60° rotatable elliptical waveguide
15” neodymium ultra low distortion woofer
Passive or bi-amplified operation
Designed for fixed installation, touring and stage monitoring
System components: LINUS RACKs, DSP-amplifiers, G18-SUB, SCP, SC4
The Coda Audio G715-96 is a versatile full range 3-way loudspeaker system that features a high power 15” neodymium
woofer and a 1.4” coaxial neodymium driver coupled to a rotatable 90° x 60° elliptical waveguide. As a 3-way system the
G715-96 may be driven passively or with bi-amplification to
provide extremely high acoustic output. The Audio G715-96 is
a powerful solution for front of house touring, installed PA for
theatres, clubs and corporate events or as a stage monitor.
installation + portable
38
ACCESSORIES
A15VG Vertical U-bracket for G715-96
A15HG Horizontal U-bracket for G715-96
24481 Wall Mount for G715-96
GFA Flying Adapter for G715-96
M6 Ringfor rigging G715-96
AK2G Array kit for 2 x G715-96
TECHNICAL SPECIFICATIONS G715-96
Type:
3-way high power full range system,
multi design enclosure
Application:
High output short/medium throw or stage monitor
Frequency response:
50 Hz - 21 kHz (-3 dB)
Power handling AES: 1000 W
Peak power:
4000 W
Sensitivity:
98 dB
Max. SPL peak:
134 dB
Dispersion:90°x60°
Components:
Low frequency:
15” neodymium woofer, 4” (101.6 mm) voice coil,
1000 W (AES)
High frequency:
1.4” neodymium coaxial driver, 3.5” (90 mm) +
1.75” (44.4 mm) voice coil, 150 W + 80 W (AES)
Crossover point:
750 Hz, 6.3 kHz passive
Nominal impedance: 8 Ω
Input connectors:
2 x Neutrik™ NL4MP
Suspension:
6 x M6 threaded points
Enclosure material:
15 / 18 mm Baltic birch plywood
Finish:
Textured black paint (all RAL-colours optional)
Dimensions (WxHxD): 420 x 700 x 370 mm
Net weight:
24.5 kg
Weatherproof version: Optional
Compact high output subwoofers
G-SUB-Series
G-SUB-Series
• Coda Audio ultra low distortion neodymium woofer
• System integration with G-Series full range systems
• Low power compression
State-of-the-art drivers
The G-SUBs are equipped with an extremely long excursion
neodymium ultra low distortion woofer. The neodymium
motor delivers extreme high magnetic flux for increased
efficiency. The 4” voice coil is 38 mm high, ensuring ultra
linear excursion of 26 mm / pp at consistent magnetic force.
installation + portable The G-SUBs are professional port loaded subwoofers
designed to complement the G-Series full range systems
for portable, touring and install applications. Equipped with
the newest generation neodymium high excursion drivers
they provide high output extended low frequency response
with punch and definition.
39
G-SUB-Series Compact high output subwoofers
G15-SUB
G15-SUB
Compact high output subwoofer
Coda Audio 15” ultra low distortion neodymium woofer
Extended frequency response down to 38 Hz
System integration with the G500-Series 2-way full range systems
Maximum SPL 138 dB (peak)
Low power compression
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G308, G512-96, G515-96
State-of-the-art drivers
The G15-SUB is equipped with an extremely long excursion
15” neodymium ultra low distortion woofer. The neodymium
motor delivers extreme high magnetic flux for increased efficiency. The 4” voice coil is 38 mm high, ensuring ultra linear excursion of 26 mm / pp at consistent magnetic force.
State-of-the-art carbon-fiber cone ensures maximum stiffness and low moving mass.
Three aluminum shorting rings reduce intermodulation distortion, minimize induction variation while reducing thermal
compression. This design dramatically reduces the distortion of a typical subwoofer at longer excursion levels, and
improves the overall sound quality and performance characteristics of the cabinet.
installation + portable
40
Applications
The G15-SUB is perfectly suited as a sub-extension for the
G500-Series systems and can be used in Houses of Worship, Theatres, clubs and mobile applications.
ACCESSORIES
DOT-G15-SUB Transport dolly for G15-SUB
CO G15-1
Protection cover for 1x G15-SUB
The G15-SUB is a 15” compact subwoofer that provides
powerful low frequency response. Low port compression
and optimized enclosure design give a tight, accurate bass
response that is ideally suited as a sub-extension for the
G500-Series systems.
TECHNICAL SPECIFICATIONS G15-SUB
Type:
15” subwoofer
Application:
Compact high output subwoofer
Frequency response (-6 dB): 38 Hz - 180 Hz
Power handling (AES/peak): 1250 W / 5000 W
Sensitivity 1 W / 1 m:*
101 dB
Maximum output peak:** 138 dB
Components:
15” neodymium ultra low distortion woofer,
4” (101.6 mm) voice coil, 1250 W (AES)
Nominal impedance:
8 Ohm, +1 / -1
Input connectors:
2x Neutrik™ NL4MP
Suspension:Optional
Enclosure material:
Baltic birch
Finish:
Textured black paint
Dimensions:
520 x 431 x 630 mm
Net weight:
34 kg
* Half-space loading
**Measured with pink noise 6 dB crest factor
Compact high output subwoofers
G-SUB-Series
G18-SUB
G18-SUB
Extended low frequency subwoofer
Coda Audio 18” ultra low distortion neodymium woofer
Extended frequency response down to 28 Hz
System integration with G700-Series systems
Maximum SPL 139 dB (peak)
Low power compression
System components: Coda Audio System Amplifier, Coda Audio System Controller,
G512-96, G515-96, G712-96, G715-96
TECHNICAL SPECIFICATIONS G18-SUB
Type:
18” subwoofer
Application:
Extended low frequency subwoofer
Frequency response (-6 dB): 28 Hz - 120 Hz
Power handling (AES/peak): 1250 W / 5000 W
Sensitivity 1 W / 1 m:*
102 dB
Maximum output peak:** 139 dB
Components:
18” neodymium ultra low distortion woofer,
4” (101.6 mm) voice coil, 1250 W (AES)
Nominal impedance:
8 Ohm, +1 / -1
Input connectors:
2x Neutrik™ NL4MP
Suspension:Optional
Enclosure material:
Baltic birch
Finish:
Textured black paint
Dimensions:
630 x 505 x 780 mm
Net weight:
46 kg
* Half-space loading
**Measured with pink noise 6 dB crest factor
The G18-SUB is an 18” compact subwoofer that provides
powerful and extended low frequency response. Low port
compression and optimized enclosure design give a tight,
accurate bass response that is ideally suited as a sub-extension for the G700-Series systems.
State-of-the-art drivers
The G18-SUB is equipped with an extremely long excursion
18” neodymium ultra low distortion woofer. The neodymium
motor delivers extreme high magnetic flux for increased efficiency. The 4” voice coil is 38 mm high, ensuring ultra linear excursion of 26 mm / pp at consistent magnetic force.
State-of-the-art carbon-fiber cone ensures maximum stiffness and low moving mass. Three aluminum shorting
rings reduce intermodulation distortion, minimize induction
variation while reducing thermal compression. This design
dramatically reduces the distortion of a typical subwoofer
at longer excursion levels, and improves the overall sound
quality and performance characteristics of the cabinet.
ACCESSORIES
DOT-G18-SUB Transport dolly for G18-SUB
CO G18-1
Protection cover for 1x G18-SUB
installation + portable Applications:
The G18-SUB is perfectly suited as a sub-extension for the
G700-Series systems and can be used in Houses of Worship, Theatres, clubs and mobile applications.
41
PW-Series
PW-Series self-powered and passive subwoofers
• Compact and powerful
• Neodymium drivers
• Ultra low distortion
• Improved transient response
• Low power compression
• Optimized size/weight to output ratio
• Extreme reliable
installation + portable
42
Small venues applications
PW100-Series subwoofers: PW112, PW115, PW118. Designed for small installations and portable use the PW100Series subwoofers combine very well with the D5 and D8
full range systems.
PW100A-Series self-powered subwoofers: PW112A, PW115A
and PW118A. Designed for small installations and portable
use the PW100A-Series self-powered subwoofers are able to
supply an additional passive subwoofer of the PW100-Series,
increasing the maximal SPL by up to 6 dB. Very well suited as
sub extension to the AP-Series self powered cabinets (please
check www.codaaudio.com for more information), too.
High output subwoofer
PW-Series
PW112A / PW112
PW112A / PW112
High output subwoofers
Self-powered high output subwoofer
Coda Audio 12” neodymium ultra low distortion woofer
1000 W RMS (2000 W burst) at 4 Ohm Class D amplifier
Capable of driving an additional passive subwoofer (PW112)
Low power compression, superb quality sound
Optical Limiter for state-of-the-art protection
Integrated 24 dB high pass crossover output for mid / high bands
System components PW112: Coda Audio System Amplifier, Coda Audio System Controller,
D5-Tube, D5-Ceiling, D5-Cube, PW112A
System components PW112A: Coda Audio System Controller, PW112, AP8
(please check www.codaaudio.com for more information on the AP-Series)
The PW112A is a compact self-powered high output subwoofer incorporating a 1000 W high efficiency class D amplifier. The integrated control electronics include an optical
limiter, 24 dB phase-aligned crossovers and EQ to provide
a perfect match between amplifier and loudspeaker for
optimum acoustic output and reliability. The incorporated
high pass crossover output (80 Hz or 125 Hz) enables easy
integration of top cabinets without additional external processing.
The high power 12” neodymium woofer provides powerful and extended low frequency response with immense
head-room. An integrated speaker output enables the use
of an additional passive subwoofer (PW112), providing an
economical solution to increase the system maximal level
to 135 dB / peak. The use of high efficiency class D amplifier together with the newly developed neodymium ultra low
distortion woofer ensures small size, reduced weight and
superb sonic performance.
Applications include small touring PA-systems or permanent installations.
TECHNICAL SPECIFICATIONS PW112
Power handling RMS: 600 W
Program power:
1200 W
Peak power:
2400 W
Sensitivity:
96 dB, 1 W / 1 m
Nominal impedance:
8 Ohm
Input connectors:
2 x Neutrik™ NL4MP
Dimensions:
450 x 394 x 530 mm
Net weight:
23 kg
Same as the PW112A without the amplifier.
TECHNICAL SPECIFICATIONS PW112A
Type:
Self-powered subwoofer
Application:
Small / medium venues subwoofer
Frequency response:
35 Hz to 80 Hz or 125 Hz (switchable)
Maximum SPL peak:
129 dB single cabinet, 135 dB (PW112A + PW112
as slave)
Amplifier:
Class D
Max. power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Components:
12” neodymium ultra low distortion woofer, 8 Ohm,
3” (77 mm) voice coil, 600 W (AES)
Crossover:
30 Hz high pass 18 dB, 80 Hz or 150 Hz low pass
24 dB, EQ
Input:Balanced
Connectors:
1 x female XLR / TRS Jack; 1 x male XLR loop;
1 x male XLR top -24 dB high pass output @ 80 Hz
or 125 Hz (Pin 2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker output: Neutrik™ NL4MP (8 Ohm only)
AC connector:
Neutrik™ PowerCon
AC power requirements: 2000 W peak, 1000 W continuous (max)
LED indicators:
Power on, Signal, 0-dB, LF limit, Overload
Gain:
-12 dB, 0 dB
Controls:
2 x high / low pass filters
Suspension:Optional
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint
Dimensions:
450 x 394 x 530 mm
Net weight:
31 kg
installation + portable
43
PW -Series High output subwoofer
PW115A / PW115
PW115A / PW115
High output subwoofer
Self-powered high output subwoofer
Coda Audio 15” neodymium ultra low distortion woofer
1000 W RMS (2000 W burst) at 4 Ohm Class D amplifier
Capable of driving an additional passive woofer (PW115)
Low power compression, superb sound quality
Optical Limiter for state-of-the-art protection
Improved transient response
Integrated 24 dB high pass crossover output for mid /
high bands
System components PW115: Coda Audio System Amplifier, Coda Audio System Controller,
D8, PW115A
System components PW115A: Coda Audio System Controller, PW115, AP12, AP15
(please check www.codaaudio.com for more information on the AP-Series)
The PW115A is a compact self-powered high output subwoofer incorporating a 1000 W high efficiency class D am-
installation + portable
44
TECHNICAL SPECIFICATIONS PW115A
Type:
Self-powered subwoofer
Application:
Small / medium venues subwoofer
Frequency response:
38 Hz to 80 Hz or 125 Hz (switchable)
Maximum SPL peak:
131 dB single cabinet or 137 dB
(PW115A + PW115 as slave)
Amplifier:
Class D
Max. power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Components:
15” neodymium ultra low distortion woofer, 8 Ohm,
3” (77 mm) voice coil, 600 W (AES)
Crossover:
30 Hz high pass 18 dB, 80 Hz or 150 Hz low pass
24 dB, EQ
Input:Balanced
Connectors:
1 x female XLR / TRS Jack; 1 x male XLR loop;
1 x male XLR top -24 dB high pass output @ 80 Hz
or 125 Hz (Pin2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker output: Neutrik™ NL4MP (8 Ohm only)
AC connector:
Neutrik™ PowerCon
AC power requirements: 2000 W peak, 1000 W continuous (max)
LED indicators:
Power on, Signal, 0-dB, LF limit, Overload
Gain:
-12 dB, 0 dB
Controls:
2 x high / low pass filters
Suspension:Optional
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint
Dimensions:
450 x 484 x 600 mm
Net weight:
34 kg
plifier. The integrated control electronics include an optical
limiter, 24 dB phase-aligned crossovers and EQ to provide
a perfect match between amplifier and loudspeaker for
optimum acoustic output and reliability. The incorporated
high pass crossover output (80 Hz or 125 Hz) enables easy
integration of top cabinets without additional external processing.
The high power 15” neodymium woofer provides powerful and extended low frequency response with immense
headroom. An integrated speaker output enables the use
of an additional passive subwoofer (PW115) providing an
economical solution to increase the system maximal level
to 137 dB / peak.
The use of high efficiency class D amplifier together with
the newly developed neodymium ultra low distortion woofer
ensures small size, reduced weight and superb sonic performance.
Applications include small touring PA-systems or permanent installations.
TECHNICAL SPECIFICATIONS PW115
Power handling RMS
600 W
Program power:
1200 W
Peak power:
2400 W
Sensitivity:
98 dB, 1 W / 1 m
Nominal impedance:
8 Ohm
Input connectors:
2 x Neutrik™ NL4MP
Dimensions:
450 x 484 x 600 mm
Net weight:
24 kg
Same as the PW115A without the amplifier.
High output subwoofer
PW-Series
PW118A / PW118
PW118A / PW118
High output subwoofers
Self-powered high output subwoofer
Coda Audio 18” high excursion woofer
1000 W RMS (2000 W burst) at 4 Ohm Class D
amplifier
Capable of driving an additional passive woofer (PW118)
Low power compression, superb sound quality
Optical Limiter for state-of-the-art protection
Integrated 24 dB high pass crossover output for mid /
high bands
System components PW118: Coda Audio System Amplifier, Coda Audio System Controller,
D8, PW118A
System components PW118A: Coda Audio System Controller, PW118, AP12, AP15, AP20,
AP24, AP25 (please check www.codaaudio.com for more information on the AP-Series)
The high power long excursion 18” woofer provides powerful and extended low frequency response with immense
headroom. An integrated speaker output enables the use
of an additional passive subwoofer providing an economical solution to increase the system maximal level to 137 dB
/ peak. The use of high efficiency class D amplifier ensures
small size, reduced weight and superb sonic performance.
TECHNICAL SPECIFICATIONS PW118
Power handling RMS: 1000 W
Program power:
2000 W
Peak power:
4000 W
Sensitivity:
98 dB, 1 W / 1 m
Nominal impedance:
8 Ohm
Input connectors:
2 x Neutrik™ NL4MP
Dimensions:
580 x 624 x 690 mm
Net weight:
39 kg
Same as the PW118A without the amplifier.
Applications include small touring PA-systems or permanent installations.
TECHNICAL SPECIFICATIONS PW118A
Type:
Self-powered subwoofer
Application:
Medium / large venues subwoofer
Frequency response:
38 Hz to 80 Hz or 125 Hz (switchable)
Maximum SPL peak:
131 dB single cabinet, 137 dB (PW118A + PW118
as slave)
Amplifier:
Class D
Max power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Components:
18” neodymium high excursion woofer, 8 Ohm, 4”
(101.6 mm) voice coil, 1100 W (AES)
Crossover:
30 Hz high pass 18 dB, 80 Hz or 125 Hz low pass
24 dB, EQ
Input:Balanced
Connectors:
1 x female XLR / TRS Jack; 1 x male XLR loop;
1 x male XLR top -24 dB high pass output @ 80 Hz
or 125 Hz (Pin 2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker output: Neutrik™ NL4MP (8 Ohm only)
AC connector:
Neutrik™ PowerCon
AC power requirements: 2000 W peak, 1000 W continuous (max)
LED indicators:
Power on, Signal, 0-dB, LF limit, Overload
Gain:
-12 dB, 0 dB
Controls:
2 x high / low pass filters
Suspension:Optional
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint+
Dimensions:
580 x 624 x 690 mm
Net weight:
46 kg
installation + portable
The PW118A is a compact self-powered high output subwoofer incorporating a 1000 W high efficiency class D amplifier. The integrated control electronics include an optical
limiter, 24 dB phase-aligned crossovers and EQ to provide
a perfect match between amplifier and loudspeaker for
optimum acoustic output and reliability. The incorporated
high pass crossover output (80 Hz or 125 Hz) enables easy
integration of top cabinets without additional external processing.
45
D-Series installation speakers
The D-Series range, precise, accurate and compact, a no compromise
approach to near-fill sound reinforcement applications where highest
quality audio is achieved via true point source technology.
This unique loudspeaker technology aligns the acoustical
centres of the transducers providing a coherent wave front
without hot-spots.
The latest generation of Coda’s advanced coaxial technology is found across the growing range; their high output and ultra low distortion characteristics combined with
precise directivity to ensure uniform coverage with perfect
time alignment between the components, the D-Series is
recognised for its high quality powerful sonic quality.
installation
46
The D-Series, incorporating D5-Tube / D5-Ceiling / D5Cube and D8 is further enhanced by the introduction of
the new D12 2-way passive system and the new D20, a
true full-range 3-way system. Both the D12 and the D20
embrace all the benefits of Coda’s point source technology
while each have additional key design advantages which
deliver an even wider set of solutions; high power before
feedback, symmetrical coverage, extended low frequency
response, true full-range performance, compact form and
a full mounting accessories suite, just some of the exacting
highlights that grace these advanced system.
D-Series - a state of the art solution for just about any installed sound reinforcement application.
2-way passive installation system
D-Series
D5-Tube / D5-Ceiling
D5-Tube
Ultra compact 2-way coaxial system
Coda Audio 5”/1” coaxial loudspeaker
Attractive solid aluminum design
D5-Ceiling
Single point source system providing coherent
wave front
Superb quality sound
Impedance 16 Ohm for easy daisy chaining
System components: Coda Audio System Amplifier, Coda Audio System Controller, PW112, PW12A
The Coda D5-Tube is a passive 2-way 5” / 1”coaxial loudspeaker system designed without compromise to provide
a true one point source in an ultra compact package.
The D5-Tube incorporates an attractive cylindrical solid aluminum enclosure supplied with a U-bracket. The cabinet
contains a high power 5” woofer and a coaxially mounted
driver with 44.4 mm voice coil. The advanced design aligns
the acoustical centers of the transducers to produce a
single point source. This unique loudspeaker technology
provides a coherent wave front without hot spots. Precise
directivity of 90° conical ensures uniform coverage with
perfect time alignment between the components.
Supported with a full range of mounting and flying accessories the D5-Tube sets a state of the art solution for almost
any high quality, near field installed sound reinforcement
applications, such as conference, restaurants, pubs, shopping centres, clubs, convention centres, houses of worship, airports and 5.1 surround.
Also available D5-Tube 100 V including 100 V trafo, 100 VA
and D5-Ceiling for ceiling suspended installation.
ACCESSORIES
CUV200
Vertical U-bracket for D5-Tube (included in delivery)
A68620
Truss Clamp for D5-Tube
installation TECHNICAL SPECIFICATIONS D5-Tube
Type:
2-way coaxial ultra compact
Application:
Superior quality short throw
Frequency response:
90 Hz - 30 kHz (-3dB)
Power handling AES:
125 W
Program power:
250 W
Peak power:
500 W
Sensitivity:
91 dB
Max. SPL peak:
117 dB
Dispersion:
90° conical
Components:
Low frequency:
5” woofer, 1.5” (38 mm) voice coil,
120 W (AES)
High frequency:
1” coaxially mounted driver, 1.75”
(44.4 mm) voice coil, 80 W (AES)
Crossover point:
1600 Hz passive
Nominal impedance:
16 Ω
100V version (optional):
100 VA
Input connectors:
2x Neutrik™ NL4MP
Enclosure material:
Solid aluminum
Finish:
Metal (all RAL-colours optional available)
Weatherproof version:
Optional
Flying hardware:
M8 Thread
Dimensions (Ø x D) D5-Tube: 170 x 193 mm
Dimensions (Ø x D) D5-Ceiling: 170 x 193 mm, ceiling cut out Ø160 mm
Net weight:
4 kg
47
D-Series 2- way passive installation system
D5-Cube
D5-Cube
2- way passive installation system
Ultra compact 2-way coaxial system
Coda Audio 5”/1” coaxial loudspeaker
Attractive solid aluminium design
Single point source system providing coherent
wave front
Superb quality sound
Impedance 16 Ohm for easy daisy chaining
System components: Coda Audio System Amplifier, Coda Audio System Controller,
PW112, PW12A
The Coda D5-Cube is a passive 2-way 5” / 1”coaxial loudspeaker system designed without compromise to provide
a true one point source in an ultra compact package. The
cabinet contains a high power 5” woofer and a coaxially
mounted driver with 44.4 mm voice coil. The advanced design aligns the acoustical centres of the transducers to produce a single point source. This unique loudspeaker technology provides a coherent wave front without hot spots.
Precise directivity of 90° conical ensures uniform coverage
with perfect time alignment between the components.
Supported with a full range of mounting and flying accessories the D5-Cube sets a state of the art solution for
almost any high quality, near field installed sound reinforcement applications, such as conferences, restaurants,
installation
48
ACCESSORIES
CU5DC
24185
24471
A68620
Vertical U-bracket for D5-Cube (included in delivery)
Wall Mount for D5-Cube
Wall Mount for D5-Cube
Truss Clamp for D5-Cube
pubs, shopping centres, clubs, convention centres, houses of worship, airports and 5.1 surround. Also available D5Cube 100 V including 100 V trafo, 100 VA.
TECHNICAL SPECIFICATIONS D5-Cube
Type
2-way coaxial ultra compact
Application:
Superior quality short throw
Frequency response:
90 Hz - 30 kHz (-3 dB)
Power handling AES:
125 W
Program power:
250 W
Peak Power:
500 W
Sensitivity:
91 dB
Max. SPL peak:
117 dB
Dispersion:
90° conical
Components:
Low frequency:
5” woofer, 1.5” (38 mm) voice coil, 120 W (AES)
High frequency:
1” coaxially mounted driver, |1.75” (44.4 mm)
voice coil, 80 W (AES)
Crossover point:
1600 Hz passive
Nominal impedance:
16 Ω
100 V version (optional): 100 VA
Input connectors:
Push buttons
Enclosure material:
12/15 mm birch multiplex
Weatherproof version: Optional
Suspension:
M6 threaded points, 3/8 thread for stand
Dimensions (WxHxD): 160x160x160 mm
Net weight:
3.5 kg
2-way passive installation system
D-Series
D8
D8
2-way passive installation system
Ultra compact 2-way coaxial system
Coda Audio 8”/1” coaxial loudspeaker
Single point source system providing coherent
wave front
Superb quality sound
M6 flying points
Improved transient response
System components: Coda Audio System Amplifier, und Coda Audio System Controller,
PW115, PW118
TECHNICAL SPECIFICATIONS D8
Type:
2-way coaxial ultra compact
Application:
Superior quality short throw
Frequency response:
70 Hz - 20 kHz (-3 dB)
Power handling AES:
250 W
Program power:
500 W
Peak power:
1000 W
Sensitivity:
95 dB
Max. SPL peak:
124 dB
Dispersion:
90° conical
Components:
Low frequency:
8” neodymium woofer, 2” (52 mm) voice coil,
250 W (AES)
High frequency:
1” neodymium driver, 1.75” (44.4 mm) voice coil,
80 W (AES)
Crossover point:
1500 Hz passive
Nominal impedance:
16 Ω
100 V version (optional): 100 VA
Input connectors:
2x Neutrik™ NL4MP
Enclosure material:
12/15mm birch multiplex
Finish:
Textured black paint (all RAL-colors optional)
Weatherproof version: Optional
Flying Hardware:
M6 threaded points
Dimensions (WxHxD): 230x348x263 mm
Net weight:
7 kg
a high power 8” woofer and a coaxially mounted driver with
44.4 mm voice coil. The advanced design aligns the acoustical centres of the transducers to produce a single point
source. This unique loudspeaker technology provides a
coherent wave front without hot spots. Precise directivity
of 90° conical ensures uniform coverage with perfect time
alignment between the components.
Also available D8 100 V including 100 V trafo, 100 VA.
Supported with a full range of mounting and flying accessories the D8 delivers a state-of-the-art solution for almost
any high quality, near field installed sound reinforcement
applications such as conference, theatres, clubs, convention centers, airports and 5.1 surround.
ACCESSORIES
CU8DV
CU8DH
24185
24171
195/8
M6 Ring
Vertical U-bracket for D8
Horizontal U-bracket D8
Wall Mount for D8
Wall Mount for D8
Stand fitting for D8
for rigging D8
installation The Coda D8 is a 2-way coaxial loudspeaker system designed without compromise to provide a true one point
source in an ultra compact package. The cabinet contains
49
D-Series 2- way passive installation system
D12
D12
2- way passive installation system
Compact 2-way coherent point source technology
12” ultra low distortion driver with 3” VC and triple
demodulation rings
Coaxially mounted 1.75” annular diaphragm superb quality HF driver
High power handling of 600 W (AES)
Symmetrical coverage of 90°
Superior sound quality
Optimized for near-field applications
High output before feedback
System integration with LINUS amplifiers
Integrated M6 flying points
System components: Coda Audio System Amplifier, Coda Audio System Controller,
System Subwoofer
The Coda D12 is a passive 2-way coaxial loudspeaker system designed without compromise to provide a true one
point source in a compact package. The cabinet contains
a high power 12” woofer and a coaxially mounted ring diaphragm high frequency driver with 44.4mm voice coil.
The advanced design aligns the acoustical centers of the
transducers to produce a single point source. This unique
loudspeaker technology provides a coherent wave front
without hot spots. Precise directivity of 90° conical ensures
uniform coverage with perfect time alignment between the
components. Supported with a full range of mounting and
flying accessories the D12 sets a state of the art solution for
almost any high quality, near field installed sound reinforcement applications.
ADVANCED DRIVER TECHNOLOGY
At the heart of the D12 is the new developed 12”/1,75” coaxial driver. The 12” cone driver covers the 60 - 1.300 Hz
range with high efficiency and smooth, linear response.
Three aluminium shorting rings reduce inter-modulation
distortion; minimize induction variation while reducing thermal compression. The coaxially mounted high frequency
driver contains an ultra light 1,75” annular diaphragm
providing exceptional transient response with very high
efficiency from 1kHz to 20 kHz. This new transducer was
engineered to radiate a single source, coherent 90° wave
front for superior dispersion control and high fidelity sound.
installation
50
SYSTEM SOLUTION
The D12 is designed to work exclusively with dedicated
Coda Audio LINUS or C3/C5 amplifiers as an integrated
solution for DSP control, amplification, network remote
control and diagnostic. The integrated solution ensures optimal performance and protection.
ACCESSORIES
CUD12V Vertical U-bracket for D12
CUD12H Horizontal U-bracket for D12
DFA
Flying adapter
24481 Wall mount
DSF Stand fitting
M6 Ring
OPTIONS
Additional colours and weather protection options are
available on request.
APPLICATIONS
Supported with a full range of mounting and flying accessories the D12 sets a state of the art solution for almost
any high quality, near field installed sound reinforcement
applications.
TECHNICAL SPECIFICATIONS D12
Type:
Compact 2-way coaxial installation system
Application:
Superior quality near field applications
Frequency response:
60 Hz - 20 kHz (-4 dB)
Power handling AES:
600 W
Peak power:
2400 W
Sensitivity:
98 dB*
Max. SPL peak:
132 dB**
Dispersion:
90° conical
Components:
Low frequency:
12” woofer, 3” (77mm) VC, 600 W (AES)
Mid/High frequency:
Annular diaphragm compression driver, 1.75”
(44.4 mm) VC, 80 W (AES)
Crossover:
1.2 kHz passive
Nominal impedance:
4Ω
Cabinets per amp channel: 1***
Input connectors:
2x Neutrik™ NL4MP
Suspension:
10 x M6 threated points
Enclosure material:
Birch plywood
Finish:
Black Polyurea coating (water resistant)
Dimensions (WxHxD):
342 x 452 x 425 m
Net weight:
19kg
Weatherproof version:
Optional
* Half-space loading
** Measured with pink noise 6 dB crest factor
*** In low SPL applications up to 2 x D12 per channel can be connected
3-way passive installation system
D-Series
D20
3-way coherent point source technology
True full range performance (35 Hz – 20 kHz)
8”/1.75” coaxial driver and 12” extremely high excursion cone driver
High power handling of 1000 W (AES)
Symmetrical coverage of 90°
Optimized for near-field applications
D20
True full range
3-way point source
System components: Coda Audio System Amplifier, Coda Audio System Controller
DESCRIPTION
The D20 is a passive 3-way full range compact system,
designed for installation applications where extended low
frequencies and superior dispersion control are required.
TECHNICAL SPECIFICATIONS D20
Type:
Compact 3-way true full range installation system
Application:
Superior quality near-field applications with
extended low range
Frequency response:
35 Hz - 20 kHz (-4 dB)
Power handling AES:
1000 W
Peak power:
4000 W
Sensitivity:
97 dB*
Max. SPL peak:
133 dB**
Dispersion:
90° conical
Components:
Low frequency:
12” woofer, 1000 W (AES)
Mid/High frequency:
8”/1,75” coaxial driver, Mid: 2” (51 mm), High:
1.75” (44.4 mm) voice coil, 180 W + 80 W (AES)
Crossover:
300 Hz, 1.3 kHz passsive
Nominal impedance:
4Ω
Cabinets per amp channel:1***
Input connectors:
2x Neutrik™ NL4MP
Suspension:
10x M6 threated points
Enclosure material:
Birch plywood
Finish:
Polyurea black coating (water resistant)
Dimensions (WxHxD):
342 x 700 x 425mm
Net weight:
26 kg
Weatherproof version:
Optional
* Half-space loading
** Measured with pink noise 6 dB crest factor
*** In low SPL applications up to 2 x D20 per channel can be connected
TRUE FULL RANGE
The 12” ultra low distortion cone driver covering the range
35 Hz – 400 Hz. with 3” voice coil, ensuring linear excursion, and 3 aluminum shorting rings reduce inter-modulation distortion; minimize induction variation while reducing
thermal compression. This design reduces dramatically the
distortion of a typical subwoofer at longer excursion levels,
and improves the overall sound quality providing deep and
punchy bass.
TRUE COCHERENT
At the heart of the D20 is the newly developed 8”/1.75” coaxial driver. The 8” cone midrange covers the 200 - 1.800
Hz range. The high frequency driver contains an ultra light
1.75” annular diaphragm providing exceptional transient
response with very high efficiency from 1kHz to 20 kHz.
CONTROLLED DISPERTION AT HIGH SPL
The low and mid range are overlapped in the range 200
– 400 Hz while mid and high range are overlapped in the
1 – 1.8 kHz range. This increases the maximal SPL of the
system providing improved directivity control.
SYSTEM SOLUTION
The D20 is designed to work exclusively with dedicated
Coda Audio LINUS or C3/C5 amplifiers as an integrated
solution for DSP control, amplification, network remote
control and diagnostic. The integrated solution ensures optimal performance and protection.
OPTIONS
Additional colours and weather protection options are
available on request.
APPLICATIONS
Designed for small to medium installation applications
where extended low frequency range at high level is required without the use of additional subwoofers.
ACCESSORIES
CUD20V Vertical U-bracket for D20
CUD20H Horizontal U-bracket for D20
DFA
Flying adapter
24481
DSF M6 Wall mount
Stand fitting
Ring
installation HISTORY
Large studio monitors are engineered to produce extended
low frequencies at low levels. Whereas, full range PA loudspeakers are not really full range; they are optimized for
high efficiency above 60Hz so require additional subwoofers to extend the lower frequency range. There are few if
any professional solutions for a compact cabinet providing
extended low frequency at high SPL. D20 is such a solution
- a compact 3-way point source designed without compromise to provide extended low frequency at high level.
51
CoRAY-Series Line source column systems
CoRAY4i
CoRAY4i
2-way line source column system
2-way ultra compact line source column system
High power handling of 700 W
Dual 4” neodymium planar wave drivers
Four 5” ultra low distortion cone speakers
Asymmetrical vertical coverage of 12° (1° up, 11° down)
Variable horizontal dispersion of 120° or 60° or
asymmetrical 90°
Optimized for permanent installations
System components: Coda Audio System Amplifier and/or Controller, G15-SUB,
G18-SUB, SC4, CoRAY4Li
Description:
The CoRAY4i is an ultra compact two-way line array column, designed for small to mid-sized venues with difficult
acoustic environments where compact size, high fidelity
sound and outstanding intelligibility is required. The cabinet contains four 5” ultra low distortion cone speakers and
two 4” HF neodymium planar wave drivers.
Versatility:
It is possibility to change the horizontal coverage between
120°, 60° or asymmetrical 90° (60°+30°) or (30°+60°) which
allows precise audience coverage, reduced reflections resulting in better intelligibility.
installation
52
Two CoRAY4i’s can be aligned, top to top as CoRAY4 Twin,
to create a consistent symmetrical vertical coverage of 24°
without interferences between the cabinets while the horizontal coverage can be modified from 120° to 60° or 120°
for short throw and 60° for long throw sending more energy
to the far field.
In this configuration the system’s acoustical output will increase by 6 dB and narrow vertical control at low frequency
for extending the long throw capabilities of the system.
System solutions:
IMPORTANT: The CoRAY4i is NOT designed to work without dedicated system controller and therefore should be
use only with proper Coda Audio controllers. The controller
will equalize the system and will ensure limiter protection.
Digital signal prodessing is available in Coda Audio System Amplifiers and standalone Coda Audio Digital Controllers. Presets for CoRAY4 are available.
Options:
Standard RAL colours and weather protection options are
available on request.
Applications include Houses of worship, small theatres,
convention centres, conference rooms, political events,
airports, museums, shopping malls, corporate events, delay line for AIRLINE LA8 or LA4 line arrays.
Line source column systems
CoRAY-Series
CoRAY4Li
CoRAY4Li
Low frequency extension for CoRAY4i
Ultra compact low frequency extension for CoRAY4i
High Power handling of 700W
Four 5“ ultra low distortion cone speakers
Optimized for permanent installations
The CoRAY4Li is an ultra compact low frequency extension
for the CoRAY4i. The cabinet contains four 5“ ultra low distortion cone speakers and features M6 threaded points on
all surfaces, optimized for permanent installations.
TECHNICAL SPECIFICATIONS CoRAY4Li
Type:
Low frequency extension for CoRAY4i
Frequency response:
80 Hz - 1300 Hz (-3 dB)
Power handling AES:
700 W
Peak power:
2800 W
Sensitivity:
97 dB
Max. SPL peak:
131 dB
Components:
4x 5” woofer, 1.5” (38 mm) voice coil,
170 W (AES)
Nominal impedance:
4Ω
Input connectors:
2x Neutrik™ NL4MP
Suspension:
M6 threaded points for use of optional U-bracket
Enclosure material:
Birch plywood
Finish:
Textured black paint
Dimensions (W x H x D): 152 x 758 x 214 mm
Net weight
12.7 kg
Weatherproof version:
Optional
installation
TECHNICAL SPECIFICATIONS CoRAY4i
Type:
2-way passive column loudspeaker
Frequency response:
80 Hz - 20 kHz (-3 dB)
Power handling AES:
700 W
Peak power:
2800 W
Sensitivity:
97 dB
Max. SPL peak:
131 dB
Dispersion horizontal:
Symmetrical 120° or 60° or asymmetrical 90°
(60°+30°)
Vertical:
12° (1° up, 11° down)
Components:
Low frequency:
4x 5” Woofer, 1.5” (38mm) voice coil,
170 W (AES)
High frequency:
2x 4” Neodymium planar wave drivers, 1.75”
(44.4 mm) voice coil, 80 W (AES)
Crossover point:
1300 Hz passive
Nominal impedance:
4Ω
Input connectors:
2x Neutrik™ NL4MP
Suspension:
M6 threaded points
Enclosure material:
Birch plywood
Finish:
Textured black paint
Dimensions (W x H x D): 152 x 755 x 214 mm
Net weight:
15.7 kg
Weatherproof/colour version:
Optional
ACCESSORIES
CF4i
Flying frame
CA4i
Twin adaptor for 2x CoRAY4i
C4VCU-bracket
C4WM Wall mount Bracket
24481
Wall mount for CoRAY4i Twin
*Subject to technical alteration without prior notice
53
OMNIO 5
OMNIO 5
With true coherent 360° omnidirectional characteristics,
Coda Audio’s new OMNIO5 has been designed and optimised to bring superior quality sound to specialist outdoor
applications.
The advanced waveguide design aligns the acoustic centres of the transducers to produce a true 360° uniform
coverage, with perfect time alignment between the components.
installation
54
Constructed from solid aluminum with special two part
coating finishes, available in any RAL colour, the OMNIO5
is designed to allow final configuration formats to be customized to specific application requirements; the enclosure
body height can be made to suit varying height/mounting
needs, with a nominal impedance of 16 Ohm and optional
100 V /70 V operation available, the OMNIO5 has a power
handling of 150 W (AES) and a frequency response from
80 Hz to 20 kHz.
Omni directional 2-way installation system
OMNIO 5
OMNIO5
Ultra compact 2-way Omni-directional system
5” ultra low distortion driver with triple demodulation
rings
Coaxially mounted 1” annular diaphragm superb
quality HF driver
Single point source providing true 360° horizontal
dispersion
Superb quality sound
Solid aluminum enclosure (all RAL colors)
Optimized for outdoor use
OMNIO5
Omni directional
2-way installation system
System components: Coda Audio DSP-amplifier
Advanced driver technology
At the heart of the OMNIO5 is the newly developed 5”/1”
coaxial driver. The 5” cone driver covers the 80 - 1300 Hz
range with high efficiency and smooth, linear response.
Three aluminum shorting rings reduce inter-modulation
distortion; minimize induction variation while reducing thermal compression. The coaxially mounted high frequency
driver contains an ultra light 1” annular diaphragm providing exceptional transient response with very high efficiency
from 1 kHz to 20 kHz. This new transducer was engineered
to radiate a single source, coherent wave front for superior
dispersion control and high fidelity sound.
System solution
The OMNIO5 is designed to work exclusively with dedicated Coda Audio amplifiers (C3 / C5) amplifiers as an
integrated solution for DSP control, amplification, network
remote control and diagnostic. The integrated solution ensures optimal performance and protection. The aluminum
enclosure is optimized for outdoor use and is painted using
a two-part, paint/sealant process,first appling the colour
application to the cabinet, followed by a clear, protective
second coat sealant
Options
All RAL colours on request. The overall height of the cabinet can be modified to fit specific mounting requirements.
An optional 100 V / 70 V version on request.
Applications
OMNIO5 can be used in a wide range of installation applications such as:
Theme parks, beaches, hotels, airports, retail outlets, sport
events, museums, congress centers, bars, restaurants,
swimming pools, private property etc.
TECHNICAL SPECIFICATIONS OMNIO5
Type
2-way omnio directional system
Application
Superior quality 360° horizontal dispersion
Frequency response
80 Hz - 20 kHz (-3 dB)
Power handling (AES)
150 W
Program power
300 W
Peak power
600 W
Sensitivity
92 dB*
Max. SPL peak
118 dB**
Disperson
H360°, V120° (60° in half space)
Components
Low frequency
5” woofer, 1.5” (38 mm) voice coil, 150 W (AES)
High frequency
1” coaxially mounted driver, 1” (25.4 mm)
voice coil, 30 W (AES)
Crossover point
1140 Hz passive
Nominal imepdance
16 Ohm
Cabinets per channel
6***
70V version (optional)
Switchable: 150W / 75W / 37.5W / 19W
Input connectors
3 m sealed cable
Enclosure material
Solid aluminum
Finish
Two part paint base/clear, RAL7021
(all RAL-colours available on request)
Dimensions
Diameter: 160 mm, 380 mm high
Net weight
8 kg
* Half space loading
** Measured with pink noise 6 dB crest factor
*** In low SPL applications up to 8x OMNIO5 per channel can be connected
installation Description
The Coda OMNIO5 is a passive Omni directional 2-way
5”/1” coaxial loudspeaker system designed without compromise to provide coherent 360° wave front without hot
spots in an ultra compact package. The advanced waveguide design aligns the acoustical centers of the transducers to produce a true 360° uniform coverage with perfect
time alignment between the components.
55
Active PA-Systems
D-Core2
PW12A
PW12
PW12A
Self-powered subwoofer with satellite amps
Passive subwoofer
Active tri-amp subwoofer with amplifier outlets
for stereo tops
Coda Audio 12” neodymium ultra low distortion woofer
1000 W plus 2 x 500 W class D amplifiers
Low power compression, superb sound quality
Optical Limiters for state-of-the-art protection
Optimized to power the Coda G-, K- and D-Series passive cabinets
Capable to drive an additional passive subwoofer PW12
System components PW12A: G308, D5-Tube, K289i, D5-Cube, PW12
PW12A is an active tri-amp system subwoofer with amplifier outlets for passive tops containing 2000 W amplification and processing for a complete stereo sub / satellite
system.
The electronics: integrates one 1000 W for the low frequency
and 2 x 500 W high efficiency class D amplifiers for the top
cabinets. The advanced analogue processor includes optical limiters for each channel, 24 dB phase-aligned crossovers, subsonic filters and EQ to provide a perfect match
between amplifiers and loudspeakers for optimum acoustic
output and reliability. The use of high efficiency class D amplifier for the subwoofer and for the tops ensures small size,
reduced weight and superb sonic performance.
The loudspeaker: 12” high power, long excursion neodymium ultra low distortion woofer providing powerful and extended low frequency response down to 30 Hz.
System integration: Optimized to work together with the
G-, K- and D-Series full range passive cabinets, the PW12A
can be connected to diverse mid-high loudspeakers for different applications to build a complete stereo sub / satellite system. An integrated speaker output enables an additional passive subwoofer (PW12) to be used increasing
installation + portable
56
PW12
TECHNICAL SPECIFICATIONS PW12
Power handling RMS: 600 W
Program power:
1200 W
Peak power:
4800 W
Sensitivity:
96 dB, 1 W / 1 m
Nominal impedance:
8 Ohm
Input connectors:
2 x Neutrik™ NL4MP
Dimensions:
398 x 454 x 465 mm
Net weight:
21 kg
Same as the PW12A without the amplifier.
the system low frequency output by 6 dB without the need
for additional processing and amplifier racks. Applications:
Used in a wide variety of configurations they provide compact
and economical plug and play solution for bands, small PAsystems, mobile DJ ’s or permanent installations.
TECHNICAL SPECIFICATIONS PW12A
Type:
Self-powered subwoofer cabinet with satellite amps
Application:
Small / medium venues subwoofer
Frequency response:
30 Hz to 110 Hz
Maximum SPL peak:
127 dB single cabinet, 133 dB (PW12A + PW12
as slave)
Amplifier Sub:
Class D
Max. power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Amplifiers Top:
2x 500 W Class D, 4 Ohm continuous, 2x 600 W burst
Components:
12” neodymium high excursion woofer 8 Ohm,
3” (77 mm) voice coil, 600 W (AES)
Crossover:
20 Hz high pass 18 dB, 100 Hz low pass 24 dB, EQ
Input:Balanced
Connectors:
L + R female XLR / TRS Jack; L + R male XLR loop,
(Pin2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker outputs: L, R, Sub, 3x Neutrik™ NL4MP
AC Connector:
Neutrik™ PowerCon
AC power requirements: 2800 W peak, 1400 W continuous (max)
LED indicators:
Power on, Signal, 0-dB, LF Limit, Overload
Gain:
-12 dB, 0 dB
Controls:
Volume: Sub, Top L, Top R
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint
Dimensions:
398 x 454 x 590 mm
Net weight:
31 kg
* Half-space loading
D-Core2 Active PA-Systems
D-Core2
D-Core2.7
D-Core2.8
2000 W, containing:
2000 W, containing:
1 x Coda PW12A
2 x Coda G308
(for more information please see page 25)
1 x Coda PW12A
1 x Coda PW12
2 x Coda K289i
(for more information please see www.codaaudio.com)
D-Core2.8 is an ultra compact active sub / sat system
for solo-entertainers, duos, unplugged, mobile DJ ’s or
corporate AV events.
D-Core2.9
D-Core2.10
2000 W, containing:
2000 W, containing:
1 x Coda PW12A
4-6 x Coda D5-Cube or Coda D5-Tube
(for more information please see pages 36 and 34)
1 x Coda PW12A
1 x Coda PW12
6-8 x Coda D5-Cube or Coda D5-Tube
(for more information please see pages 36 and 34)
D-Core2.9 is a distributed installation system for bistros,
restaurants, pubs, shopping centres, multimedia, houses
of worship, conferences or corporate AV events.
D-Core2.10 is a distributed installation system for bistros,
restaurants, pubs, shopping centres, convention centres,
multimedia, houses of worship, conferences or corporate
AV events.
installation + portable D-Core2.7 is an ultra compact active sub / sat system
for solo-entertainers, duos, unplugged, mobile DJ ’s and
corporate AV events.
57
Active PA-Systems
D-Core5
PW15A-Pro
PW15A-Pro
Active tri-amp subwoofer including
amplifier outlets for stereo tops
Active tri-amp subwoofer including amplifier outlets
for stereo tops
Coda Audio 15” neodymium ultra low distortion woofer
1000 W plus 2 x 500 W class D amplifiers
System components: G308, K289i
PW15A is an active tri-amp system subwoofer with amplifier
outlets for passive tops containing 2000 W amplification and
processing for a complete stereo sub / satellite system.
The electronics: integrates one 1000 W for the low frequency
and 2 x 500 W high efficiency class D amplifiers for the top
cabinets. The advanced analogue processor includes optical limiters for each channel, 24 dB phase-aligned crossovers, subsonic filters and EQ to provide a perfect match
between amplifiers and loudspeakers for optimum acoustic
output and reliability.
The use of high efficiency class D amplifier for the subwoofer
and for the tops ensures small size, reduced weight and superb sonic performance.
The loudspeaker: 15” high power, long excursion neodymium
ultra low distortion woofer providing powerful and extended
low frequency response down to 38 Hz. The loudspeaker
is 4 Ohm, consuming the whole power of 1000 W from the
class D amplifier and therefore cannot drive an additional
passive subwoofer. The cabinet incorporates extremely long
excursion and a state-of-the-art 15” neodymium driver found
only in top of the range concert systems. Optimal output v /
s volume.
installation + portable
58
Low power compression, superb sound quality
Optical Limiters for state-of-the-art protection
Optimized to power the Coda G- and K-Series passive cabinets
System integration: Optimized to work together with the Gand K-Series full range passive cabinets, the PW15APro can
be connected to diverse mid-high loudspeakers for different
applications to build a complete stereo sub / satellite system without the need for additional processing and amplifier
racks. Optimal output v / s volume.
Applications: Used in a wide variety of configurations they provide compact and economical plug and play solution for bands,
small PA-systems, mobile DJ’s or permanent installations.
TECHNICAL SPECIFICATIONS PW15A-Pro
Type:
Active tri-amp subwoofer with amplifier outlets
for tops
Application:
Small / medium venues
Frequency response:
38 Hz to 100 Hz
Maximum SPL peak:
132 dB
Amplifier Sub:
Class D
Max. power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Amplifiers Top:
2 x 500 W Class D, 4 Ohm continuous,
2 x 600 W burst
THD+N:
< 0.001 %
Components:
15” neodymium high excursion woofer, 4 Ohm,
4” (101 mm) voice coil, 1200 W (AES)
Crossover:
28 Hz high pass 18 dB, 100 Hz low pass 24 dB, EQ
Input:Balanced
Connectors:
L + R female XLR / TRS Jacks; L + R male XLR
loop (Pin 2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker outputs: L, R, Sub, 3x Neutrik™ NL4MP
AC connector:
Neutrik™ PowerCon
AC power requirements: 2800 W peak, 1400 W continuous (max)
LED Indicators:
Power on, Signal, 0-dB, LF Limit, Overload
Controls:
Volume: Sub, Top L, Top R,
Gain:
-12 dB, 0 dB
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint
Dimensions:
510 x 454 x 650 mm
Net weight:
36 kg
D-Core5 Active PA-Systems
D-Core5.5
D-Core5.6
2000 W, containing:
2000 W, containing:
1 x Coda PW15A-Pro
2 x Coda G308
(for more information please see page 25)
1 x Coda PW15A-Pro
2 x Coda K289i
(for more information please see www.codaaudio.com)
D-Core5.5 is a compact sub / sat system for bands, mobile
DJ’s as well as general PA applications.
D-Core5.6 is a compact sub / sat system for bands, mobile
DJ’s as well as general PA applications.
installation + portable D-Core5
59
Active PA-Systems
D-Core8
PW18A-Pro
PW18A-Pro
Active tri-amp subwoofer including
amplifier outlets for stereo tops
Active tri-amp subwoofer including amplifier outlets
for stereo tops
Coda Audio 18” Neodymium ultra low distortion woofer
1000 W plus 2 x 500 W class D amplifiers
System components: G308, G512-96
PW18A-Pro is an active tri-amp subwoofer with amplifier
outlets for passive tops containing 2000 W amplification
and processing for a complete stereo Sub / Sat system.
The electronic: integrates one 1000 W high efficiency class
D amplifier for the low frequency and 2 x 500 W class D
amplifiers for the top cabinets. The advanced analogue
processor includes optical limiters for each channel, 24 dB
phase-aligned crossovers, subsonic filters, EQ’s etc to provide a perfect match between amplifiers and loudspeakers
for optimum acoustic output and reliability.
The use of high efficiency class D amplifiers for the subwoofer and for the tops ensures small size, reduced weight
and superb sonic performance.
The loudspeaker components: high power high excursion
neodymium ultra low distortion woofers provide powerful
and extended low frequency response. The incorporated
18” loudspeaker is 4 Ohm, consuming the whole power
of 1000 W from the class D amplifier and therefore cannot
drive additional passive subwoofers. The cabinet incorporates extremely high excursion, state of the art 18” neodymium driver found only in top of the range concert systems.
Optimal output v / s volume.
installation + portable
60
Low power compression, superb sound quality
Optical Limiters for state-of-the-art protection
Optimized to power the Coda G-Series passive
cabinets
System integration: Optimized to work together with the
G-series full range passive cabinets, the PW18APro active
subwoofer can be connected to diverse mid-high loudspeakers for different applications to build a complete stereo Sub/Sat system while replacing multiple 19” audio gear
and eliminate the need of external racks.
Applications: Used in a wide variety of configurations they
provide compact and economical plug and play solution
for bands, small touring PA-systems, mobile DJ’s or permanent installations.
TECHNICAL SPECIFICATIONS PW18A-Pro
Type:
Self-powered subwoofer cabinets and satellite amps
Application:
Small / medium venues subwoofer
Frequency response:
30 Hz to 80 Hz
Maximum SPL peak:
131 dB
Amplifier Sub:
Class D
Max. power output (RMS):1000 W / 4 Ohm
Peak output current:
50 A
THD+N:
0.04% @ 1000 W, 100 Hz, 4 Ohm
Amplifiers Top:
2 x 500 W Class D, 4 Ohm continuous,
2 x 600 W burst
THD+N:
< 0.001%
Components:
18” high excursion woofer 4 Ohm, 4” (101.6 mm)
voice coil, 1200 W (AES)
Crossover:
20 hz high pass 18 dB, 100 Hz low pass 24 dB, EQ
Input:Balanced
Connectors:
L + R female XLR / TRS Jack; L + R male XLR
loop (Pin 2+; 3-; 1 Gnd)
Impedance:
10 kOhm
Input sensitivity:
0.775 V (RMS)
External speaker outputs: L, R, Sub, 3x Neutrik™ NL4MP
AC connector:
Neutrik™ PowerCon
AC power requirements: 2800 W peak, 1400 W continuous (max)
LED Indicators:
Power on, Signal, 0-dB, LF Limit, Overload
Gain:
-12 dB, 0 dB
Controls:
Volume: Sub, Top L, Top R
Enclosure material:
18 mm Baltic birch
Finish:
Textured black paint
Dimensions:
580 x 624 x 690 mm
Net weight:
51 kg
D-Core8 Active PA-Systems
D-Core8.6
D-Core8.7
2000 W, containing:
2000 W, containing:
1 x Coda PW18A-Pro
2 x Coda G512-96
(for more information please see page 26)
1 x Coda PW18A-Pro
4 x Coda G308
(for more information please see page 25)
D-Core8.6 is an active compact sub / sat system for bands,
mobile DJ’s as well as general PA applications.
D-Core8.7 is a distributed four point system for small clubs,
theatres, shopping centres or corporate AV events.
installation + portable D-Core8
61
Electronics 2-channel DSP amplifier
C3
C3
2-channel DSP amplifier, 2500W
2 x 1250W@2 Ohm or 1 x 2500W@4 Ohm
2 Ohm and 70V / 100V line capability
2-input, 2-output, 96 kHz DSP with real-time monitoring
Extremely rugged with abuse logging
The Coda Audio C3 is a 19”/2U high performance, cost
effective 2 channel power amplifier integrating light-weight
power supplies, high power class D amplifiers and USB or
network controlled 24 bit 96kHz extremely powerful state-ofthe-art SHARC based DSP. The C-Net network allows remote
control of DSP parameter such as delays, EQs, groups etc,
as well as completes monitoring of amplifier conditions and
loudspeaker loads.
C3 also has the capability to recall up to four different sets of
settings by the means of rear panel contact closure inputs.
This can be particularly important in voice evacuation
applications where, for example, it may be required to mute
the current source of audio, switch to an alternate input
carrying an evacuation message and broadcast it with
different level and EQ settings. Each pair of C3 channels can
automatically do this either independently or collectively.
Factory presets for Coda Audio G-Series, D-Series, CUE
monitors, LA4 and CoRAY4 systems provide optimal power
solution for wide range of fixed installation applications.
installation + touring
62
ACCESSORIES
Airflow filtering kit
Rear rack support kit
C-Net network control and monitoring of amplifiers and loudspeaker loads
Factory presets for Coda Audio G-Series, D-Series, CUE monitors, LA4 and CoRAY4 systems
TECHNICAL SPECIFICATIONS C3
AMPLIFIERS
Type:
Number of channels:
Output power:
per channel:
per bridged pair:
Slew rate:
Damping factor:
Efficiency:
High efficiency class D
Two
(RMS program, 20Hz-20kHz all channels driven)
2x 1,250W in to 2 Ohms
2x 800W in to 4 Ohms
2x 450W in to 8 Ohms
1x 2,500W in to 4 Ohms
1x 1,600W in to 8 Ohms
1x 900W in to 16 Ohms
>80V/us
120 ref 8 Ohms
>90% typical
AUDIO SPECIFICATIONS
Input impedance:
Max Input level:
Frequency Response:
Output noise:
Distortion
10k balanced
+20dBu
20Hz - 20kHz+/-0.5dB @ 4 Ohm load
-106dB A weighted Ref max output, 22kHz BW
<0.05% (1kHz, -3dB output. 22kHz BW)
PROTECTION SYSTEMS
Output over current:
Over temperature:
Mains Brownout:
Switch on surge:
DC on output:
Initially gain reduced to maintain control, extreme
or persistent over current causes shutdown
limiters applied, persistent over temperature
causes shutdown
Automatic protection & recovery
Soft-start current inrush limiting
Immediate shutdown, power cycle to recover
2-channel DSP amplifier
Electronics
C3
TECHNICAL SPECIFICATIONS C3
TECHNICAL SPECIFICATIONS C3
THERMAL
Two variable speed fans
CONNECTIONS
Mains (per C3):
Audio input (per channel):
Audio link (per channel):
Output (per channel):
USB:
Network (input & link):
Auxiliary (input & link):
POWER SUPPLIES
Type:
High current, high freq. switch-mode
Number:
One / Two, fully independent
Efficiency:
>90% typical
Input voltage: 115v / 230v nominal +/- 10%
* for 100v operation output figures please see separate specifications
Input voltage selection: Automatic
Mains frequency range: 45 - 65Hz
Other features:
Automatic soft-start
Automatic brownout recovery
Remote shutdown
Automatic over voltage protection
Recommended minimum operating voltage
230V range
155V
115V range
80V
Note that the range is automatically selected.
PHYSICAL
Height:
2RU, 88mm
Width:
19”, 482mm (front panel)
16.8”, 427mm (rear chassis)
Depth:
14”, 360mm (behind rack)
1.4”, 35mm (forward of rack)
Net weight:
8 kg
Operating temperature range: 0 to +40°C
Relative humidity range: 0 to 80% (non-condensing)
touring + installation
INDICATORS & CONTROLS
Indicators per channel: Sig, Limit -6dB, Limit
Indicators per channel pair: Power, Protect, Bridge, Network, User DSP active
Front panel controls:
Per channel pair:
User DSP Defeat - can be disabled with C-Net
Power switch
Rear panel:
Per channel pair:
Contact closure inputs and Shutdown input (Aux)
Monitoring facilities:
Input signal level, Output signal level
Output current level
Temperature
Limiter operation
Protection system operation
Driver impedance
Neutrik „Powercon”
3 pin female XLR
3 pin male XLR
Neutrik NL4 „Speakon”
Type B (peripheral type)
2x RJ45 socket
2x RJ45 socket
63
Electronics 4-channel DSP amplifier
C5
C5
4-channel DSP amplifier, 5000 W
Integrated DSP, network and amplifier solution
4x 1250W@2 Ohm or 2x 2500W@4 Ohm
2 Ohm and 70 V / 100 V Line Capability
4 –input, 4 – output, 96 kHz DSP with real-time
monitoring
The Coda Audio C5 is a 19”/2U high performance, cost
effective four channel power amplifier integrating light-weight
power supplies, high power class D amplifiers and USB or
network controlled 24 bit 96 kHz extremely powerful state-ofthe-art SHARC based DSP. The C-Net network allows remote
control of DSP parameter such as delays, EQs, groups etc,
as well as complete monitoring of amplifier conditions and
loudspeaker loads.
The C5 also has the capability to recall up to four different
sets of settings by the means of rear panel contact closure
inputs.
This can be particularly important in voice evacuation
applications where, for example, it may be required to mute
the current source of audio, switch to an alternate input
carrying an evacuation message and broadcast it with
different level and EQ settings. Each pair of C5 channels can
automatically do this either independently or collectively.
Factory presets for Coda Audio G-Series, D-Series, CUE
monitors, LA4 and CoRAY4 systems provide optimal power
solution for wide range of fixed installation applications.
installation + touring
64
Extremely rugged with abuse logging
C-Net network control and monitoring of amplifiers and
loudspeaker loads
Factory presets for Coda Audio G-Series, D-Series,
CUE monitors, LA4 and CoRAY4 systems
TECHNICAL SPECIFICATIONS C5
AMPLIFIERS
Type:
High efficiency class D
Number of channels: Four
Output power 4 channels (RMS program, 20Hz-20kHz all channels driven):
4 x 1250W in to 2 Ohms
4 x 800W in to 4 Ohms
4 x 450W in to 8 Ohms
Output power 2 bridged channels (RMS program, 20Hz-20kHz all channels
driven) per bridged pair: 2 x 2500W in to 4 Ohms
2 x 1600W in to 8 Ohms
2 x 900W in to 16 Ohms
Output power 3 channels (RMS program, 20Hz-20kHz all channels driven):
2 x 1250W@2 Ohms + 2500W@4 Ohms
2 x 800W@4 Ohms + 2500W@4 Ohms
2 x 450W@8 Ohms + 1250W@8 Ohms
Slew rate:
>80V/us
Damping factor:
120 ref 8 Ohms
Efficiency:
>90% typical
DSP
Sampling rate:
96 kHz
AD Convertors:
Burr-Brown
DA Convertors:
Wolfson
Processor:Sharc
Remote network:
C-Net
4-channel DSP amplifier
Electronics
TECHNICAL SPECIFICATIONS C5
TECHNICAL SPECIFICATIONS C5
AUDIO SPECIFICATIONS
Input impedance:
Max Input level:
Frequency Response:
Output noise:
Distortion:
POWER SUPPLIES
Type:
Number:
Efficiency:
Input voltage:
Input voltage selection:
Mains frequency range:
Other features:
High current, high freq. switchmode
Two, fully independent
>90% typical
100V* / 115V / 230V nominal +/- 10% (*for
100V operation please see separate specifications)
Automatic
45 - 65Hz
Automatic soft-start, automatic brownout recovery
Remote shutdown, automatic over voltage protection
CONNECTIONS
Mains:
Audio input (per channel):
Audio link (per channel):
Output (per channel):
USB:
Network (input & link):
Auxiliary (input & link):
Neutrik ‘Powercon’
3 pin female XLR
3 pin male XLR
Neutrik NL4 ‘Speakon’
Type B (peripheral type)
2x RJ45 socket
2x RJ45 socket
10k balanced
+20dBu
20Hz - 20kHz+/-0.5dB 4 Ohm load
-106dB A weighted, Ref max output, 22kHz BW
<0.05% (1kHz, -3dB output. 22kHz BW)
PROTECTION SYSTEMS
Output over current:
Initially gain reduced to maintain control,
persistent over current causes shutdown
Over temperature:
limiters applied, persistent over temperature causes shutdown
Mains Brownout:
Automatic protection & recovery
Switch on surge:
Soft-start current inrush limiting
DC on output:
Immediate shutdown, power cycle to recover
THERMAL
One variable speed fan per pair of channels
and additionally one variable speed fan per unit
Airflow is from the rear to the front
INDICATORS & CONTROLS
Per channel:
Sig, Limit -6dB, Limit
Per channel pair:
Power, Protect, Bridge, Network, User DSP active
Controls per channel pair:
Front panel:
User DSP defeat (can be disabled with C-Net)
Power switch
Rear panel:
Two contact closure inputs, shutdown input
Monitoring facilities:
Input signal level, output signal level
Output current level, temperature, limiter operation
Protection system operation, driver impedance
PHYSICAL
Height:
2RU, 88 mm
Width:
19”, 482 mm (front panel)
16.8”, 427 mm (rear chassis)
Depth:
14”, 360 mm (behind rack)
1.4”, 35 mm (forward of rack)
Weight:
9 kg (20lbs)
Operating temperature range:
0 to +40°C
Relative humidity range: 0 to 80% (non-condensing)
installation + touring
C5
65
Electronics C5
touring + installation
66
4-channel DSP amplifier
67
Coda Audio
Boulevard der EU 6
30539 Hannover, Expo Park
Germany
Phone: +49 (0)511- 866 558 88
Fax: +49 (0)511- 866 558 87
E-Mail: contact@codaaudio.com
Website: www.codaaudio.com
68
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising