Hydraulic Fracturing Fluid Product Component Information

Hydraulic Fracturing Fluid Product Component Information
Hydraulic Fracturing Fluid Product Component Information Disclosure
Fracture Date:
State:
County:
API Number:
Operator Name:
Well Name and Number:
Longitude:
Latitude:
Long/Lat Projection:
Production Type:
True Vertical Depth (TVD):
Enter the date on which the fracture job was completed. Enter as mm/dd/yyyy (must be greater than 1/1/1950).
Enter the name of the state where the well is located. DO NOT use the two-character state abbreviation.
Enter the name of the county or parish where the well is located.
Enter the 10-digit API number. IMPORTANT: DO NOT enter the dashes.
Enter the name of the well operator as it appears on the lease identification sign.
Enter the name and number of the well as it appears on the lease identification sign.
Enter the longitude of the well in decimal degrees. IMPORTANT: Do not forget to enter a minus sign at the front.
Enter the latitude of the well in decimal degrees.
Enter the datum/projection of the latitude/longitude (NAD27, NAD83 or WGS84).
Enter the type of well as "Oil", "Gas" or "Oil and Gas".
Enter the deepest penetration point of the well, excluding pilot holes.
Total Water Volume (gal) 1:
Enter the total volume of water actually used to fracture the well. This includes fresh recycled brackish produced
or other water but does not include water that is not actually placed in the formation.
1
TOTAL WATER VOLUME SOURCES MAY INCLUDE FRESH WATER, PRODUCED WATER AND/OR RECYCLED WATER.
Hydraulic Fracturing Fluid Composition:
Trade Name
(Additive)
Name of the
product used
Supplier
Purpose
Name of the
Reason the addtitive was
company
used (such as Biocide
supplying
Acid Crosslinker etc.)
the additive
Ingredients
Chemical Abstract
Service Number
(CAS#)
Maximum
Ingredient
Concentration in
HF Fluid
(% by mass) 2
Names of the actual chemicals in
the additive listed individually
Chemical Abstract
Service number
Chemical concentration
in the total fluid
Comments
Special comments
Ingredients shown below are not subject to 29 CFR 1910.1200(i) and do not appear on Material Safety Data Sheets (MSDS).
2
INFORMATION IS BASED ON THE MAXIMUM POTENTIAL FOR CONCENTRATION AND THUS THE TOTAL MAY BE OVER 100%.
(attach additional sheets as necessary)
Hydraulic Fracturing Fluid Composition:
Trade Name
(Additive)
Name of the
product used
Supplier
Purpose
Name of the
Reason the addtitive was
company
used (such as Biocide
supplying
Acid Crosslinker etc.)
the additive
Ingredients
Chemical Abstract
Service Number
(CAS#)
Maximum
Ingredient
Concentration in
HF Fluid
(% by mass) 2
Names of the actual chemicals in
the additive listed individually
Chemical Abstract
Service number
Chemical concentration
in the total fluid
Comments
Special comments
Ingredients shown below are not subject to 29 CFR 1910.1200(i) and do not appear on Material Safety Data Sheets (MSDS).
2
INFORMATION IS BASED ON THE MAXIMUM POTENTIAL FOR CONCENTRATION AND THUS THE TOTAL MAY BE OVER 100%.
(attach additional sheets as necessary)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement