1 x 10GbE, Single Port Ethernet Line Module with

1 x 10GbE, Single Port Ethernet Line Module with
DATASHEET
1 x 10GbE, Single Port Ethernet Line Module
with Hitless Data Switching
1 x 10GbE Ethernet Line Module
with Hitless Switching For
Data Applications
As a line card in a MD8000 chassis, the 1 x 10GbE Ethernet module offers
a single 10Gbps Ethernet port with hitless switching for uninterrupted,
robust data service. The card provides bi-directional hitless switching for
customer data traffic between endpoints while providing fiber trunk path
diversity between those same endpoints.
The 1 x 10GbE Ethernet line module provides
10GbE service across a single port with
true hitless/zero second switching and path
diversity for demanding data applications
such as Remote Production/REMI.
The ingress 1 x 10GbE Ethernet line module encapsulates customer data
into a single RTP stream at the transmitter site where resulting packets are
then transported on two redundant fiber trunk paths to the receiving site.
KEY FACTS:
• Compatible with MD8000 networking
equipment
• True Hitless data protection using Media
Links advanced proprietary Hitless logic
• Bi-directional Ethernet traffic
• High throughput and low latency for
real-time applications such as
remote production
• Auto or Manual resume for buffer resync
KEY FEATURES:
• MTU Jumbo Frame support up to
9,026 bytes
• Supports single 10GbE Ethernet port
• Optical 10Gbps SFP+ interface, 10GBASESR/LR/ER/ZR with full SFP statistics
• 93.8% Committed Data Rate of
Tx RTP Stream
• 512Kbyte FIFO buffer
The receiving 1 x 10GbE line card checks and aligns sequence numbers
and timestamps in the RTP header on both received fiber trunk
paths. It then chooses the best packet of the two received paths for
de‑encapsulation and egress to the customer interface. This allows the
network to handle routine errors that may occur such as out-of-order
packets, duplicate packets, and/or lost packets. When erred packets are
detected, hitless, zero second switchover to the other fiber trunk path
will automatically occur by the line module’s internal logic.
RTP Payload
(Tx Packet)
• Local access point-to-point data transfers
• Lossless push-pull bi-directional
file transfers
• Protected IP video transport
• Remote production and remote integration
• High speed / High reliability file transfers
H
Segment
H
(1-0)
Packet
(2)
Segment
(2-0)
Packet
(4)
Packet
(3)
H
(3-0)
H
Constant Length RTP Payload
H
3-1
Segment
(4-0)
H
Constant Length RTP Payload
Segment
(4-1)
H
Padding
Constant Length RTP Payload
Customer Ingress Frames
Constant Length RTP Payload
RTP Payload
(Rx Packet)
Output Packet
APPLICATIONS:
Packet
(1)
Input Packet
H
Segment
H
(1-0)
Packet
(1)
Segment
(2-0)
Packet
(2)
H
Constant Length RTP Payload
(3-0)
H
3-1
H
Segment
(4-0)
Packet
(3)
Customer Egress Frames
Constant Length RTP Payload
H
Packet
(4)
Segment
(4-1)
H
Padding
DATASHEET
SPECIFICATIONS & SUPPORTING PARAMETERS
1 x 10GbE Customer Network Interface Specifications
Item
Description
Remarks
Input/output interface
Connector: 1 * SFP+ cages
MSA compliant SFP+ modules shall be used (SFF-8431,
SFF-8432, and SFF-8472).
Port-1 only
Supportable interfaces
10GBASE-SR/LR/ER/ZR
(depending upon the SFP+ type installed)
MTU/MRU
9,026 bytes
Including FCS
Supported VLAN Tag Format
IEEE 802.1Q, IEEE 802.1ad format
Untagged, single VLAN tagged, double
VLAN tagged
1 x 10GbE Service Specifications (port-to-SWCNT)
Item
Description
Remarks
# of Services
1 Hitless Service per port
Port-1 only
Service Description
Hitless Service for any single stream of Ethernet frames
(data traffic)
Port: Filtering
None
All Ethernet frames are transferred
Port: Ingress FIFO Size
512 Kbyte per port
Shared by all the traffic classes
Port: Committed Rate
93.8 % of the Tx RTP Stream rate
System: Encapsulation Format
MAC+VLAN(IEEE 802.1Q Tag)+IPv4+UDP+RTP
System: RTP Payload
MGL Data Composition profile (MGL proprietary)
Payload Type = 100 (0x64)
System: RTP Tx Rate
Class j: 100~10,000 Mbps
Class B/Class C/Single: 100~5,000 Mbps
Unit = 1Mbps
System: Transmission lines
2 Lines for Hitless protection
or 1 line (no protection)
1 x 10GbE Service Specifications (SWCNT-to-port)
Item
Description
Remarks
# of Services
1 Hitless Service per port
Port-1 only
Service Description
Hitless Service for any single stream of Ethernet frames
(data traffic)
System: Receive Frame Format
MAC+VLAN(IEEE 802.1Q Tag)+IPv4+UDP+RTP
System: RTP Payload
MGL Data Composition profile (MGL proprietary)
System: Transmission lines
2 Lines for Hitless protection
or 1 line (no protection)
System: Receive Filtering
DMAC Address, VLAN ID, DIP Address, DUDP Port Number
Port: Output format
Ethernet Frames
Port: Egress Rate Control
None
Equal to the Ingress rate at the transmitter
Line Switching: Control
Auto Switching between Line1 and Line2
Manually configured to a given Line
MGL Proprietary
Payload Type = 100 (0x64)
Configured per Line
DATASHEET
1 x 10GbE General Specifications
Item
Description
Remarks
Operable chassis
All MD8000 series chassis
MD8000, MD8000EX, or MD8000SX
Board structure
Front + Rear cards
External dimensions
Front board: 17 mm (W) * 113 mm (H) * 367 mm (D)
Rear board: 41 mm (W) * 96 mm (H) * 126 mm (D)
Weight
1 kg or less
Power consumption
33.0 W or less
Operating temperature
0 ~ 40°C (Ambient)
Under the no-condensing humidity
condition
Redundancy modes
All MD8000 modes of operation are supported
Single/Class B/Class C/Class J
Compliant with
CE/CSA, NEBS Level 3
Front board occupies a 1-slot width.
Rear board occupies either a 1-slot width
(SFPx4port) or a 2-slot width (SFPx8port)
AGE REAR PANEL PLUG-INS
MPGbE
IN-SRV
-2S
All SFP modules are compliant
(INF-8074i and SFF-8472) standards.
MAINTE
ACT
ERR
POWER
POWER
TEMP
0
BC D
DATASHEET-1x10GbE-08-2017
PORT 1
PORT 2
PORT 3
RX
PORT 5
RX
TX
PORT 6
RX
TX
PORT 7
RX
TX
PORT 4
PORT 4
RX
TX
RX
TX
PORT 2
RX
TX
PORT 1
RX
TX
RX
TX
RX
4 Port Rear
Panel
Media Links (Headquarters)
Kawasaki Tech Center 18F
580-16 Horikawa-cho,
Saiwai-ku, Kawasaki-shi,
Kanagawa 212-0013 Japan
Phone: +81 44-589-3440
query@medialinks.co.jp
PORT 8
RX
TX
BC D
2 345
78 9
A 6
EF 1
TX
0
6 78 9 A
EF 1
2 345
MPGbE-8S-R
TX
2
Note that only Port 1 on the rear panel card is
utilized in 10GbE operation in both 8 and 4 port
rear configurations
PORT 3
1
MD8000-10GbE Ethernet Line Module with
front and rear panels.
TX
LINE
MPGbE-4S-R
RX
SFP
LINK
IF
RXER
LOS
2
R
IN
TX
RX2
BERV
2
QoS
TS
TX
RX
Tx PKT-L 2
1
2
Rx PKT-L
1
2
PRTCT
M
S
LLCF
S
M
PGEN
LB
Media Links Americas
431-C Hayden Station Road
Windsor, CT 06095
USA
Phone: +1 860-206-9163
Fax: +1 860-206-9165
info@medialinks.com
Media Links Australia
2-12 Rokeby Street,
Collingwood, VIC 3066,
Australia
Phone: +61 3-9017-0175
Fax: +61 3-8456-6339
info@medialinksaustralia.com.au
8 Port Rear
Panel
Media Links EMEA
Thremhall Park
Start Hill, Bishop’s Stortford,
Herts CM22 7WE
United Kingdom
Phone: +44(0)1279 874371
emea_info@medialinks.com
www.medialinks.com
© 2017 Media Links. All rights reserved. Specifications subject to change without notice.
Media Links and Media Defined Networking are trademarks of Media Links.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising