STLs BRAND NEW!! - Broadcast Supply Worldwide

STLs BRAND NEW!! - Broadcast Supply Worldwide
order/info: 1·800·426·8434 • www.bswusa.com
Moseley Starlink
SL9003Q STL
Systems
Moseley’s Starlink SL9003Q
is an open architecture,
all-digital aural STL without
compromise. Using
spectrally efficient QAM
(Quadrature Amplitude Modulation) technology, it conveys up to
four linear uncompressed audio channels over a single narrow bandwidth 950 MHz STL
channel. This uncompressed 16-bit linear audio is absolutely uncompromised and can
be configured with up to two pairs of stereo audio (that’s like getting two radio signals
for the price of one). AES/EBU I/O, combined with a sample rate converter, provide
seamless connection without delay. Selectable digital audio sampling rates of 32, 44.1 or
48 kHz. Call BSW for the lowest prices on Moseley STLs today.
SL9003Q2S 1 stereo pair 44.1 kHz audio sampling 16 QAM modulation
List $12,950.00
SL9003Q-4S 2 stereo pairs 32 kHz audio sampling 32 QAM modulation
(on request two 44.1 kHz stereo pairs at 128 QAM can be special
ordered)
List $16,250.00
SL9003Q-2SLAN 1 stereo pair 44.1 kHz, UDP Mux for HD Radio,
32 QAM mod. List $15,450.00
SL9003Q-4SLAN 2 stereo pair 32 kHz., UDP Mux for HD Radio,
64 QAM modulation
List $18,750.00
Call BSW For Lowest Price: 800-426-8434
Moseley Starlink SL9003T1
Digital STL System Over T1 Lines
The Starlink 9003T1 is a powerful, all-digital modular system for transmitting highquality audio over T1 lines. It provides great flexibility in configuring multiple channel
STL/TSL. With configuration options limited only by the imagination. This system
utilizes a range of personality modules and daughter cards in a 3-rack unit mainframe.
The mainframe can house up to eight application-specific modules including 16-bit
PCM linear digital audio, ISO/MPEG layer II or apt-X source coding, drop/insert and
variable-rate digital mux, speech/fax/data cards, T1/E1 and more. A building block
“any-card, any-slot” approach is used resulting in lower cost, greater flexibility and
enhanced reliability. The use of international standard digital I/Os allows the system to
seamlessly connect to the outside world. Linear digital audio can be delivered by use
of a source coder module, a source decoder module, two T1 line drivers, external CSUs
and the mainframes. A digital four-port mux allows additional compressed audio
channels to be carried by the system. In addition, data and voice cards for transmitter
control and operational communications can be added into the system. Several STL/
TSL pre-packaged systems are available. For example the SL9003T1-2X0 is a simplex
2-channel T1/E1 STL that provides stereo audio and RS-232 in one direction and two
bidirectional RS-232 data circuits. Includes two SL9003T1 chassis with power supplies,
SL9000SET1 Source Encoder and SL9000SDT1 Source Decoder audio modules with
AES/EBU and analog I/Os and 32, 44.1 or 48 kHz sample rates, four SL9000RS232 cards,
6-port Mux and CSU. Call BSW for a solution for your station.
SL9003T1-2XO
2-channel, simplex (uni-directional) T1 STL system List $6,250.00
SL9003T12X2
2-channel, duplex (bi-directional) T1 STL system List $8,750.00
SL9003T12X2LAN 2-channel, duplex T1 STL system with LAN
duplex Ethernet channel
List $10,750.00
Call BSW For Lowest Price: 800-426-8434
Moseley Lanlink
HS 900 LAN/IP
Transmitters
The high-speed Lanlink HS 900
and HS 900D are long-range (up
to 30 miles) point-to-multipoint
IP/Ethernet/IP-based facility controller solutions. They allow broadcasters to take
advantage of existing 950 MHz aural STL antenna infrastructure and bring LAN
connectivity, along with two RS-232 data circuits, between a single studio and
multiple transmitter/studio sites. The LanLink connects remote controls, audio codecs
for back-up STL, and can also provide audio/video connectivity. LANLINK HS 900:
LAN extender/data link. Provides Ethernet Bridge at 1 Mbps/512 kbps and two RS-232
channels at 1,200 bps to 115.2 kbps. Operates in the license-free 908-928 MHz ISM band.
Requires external antenna system. Includes two LanLink HS 900 radios. LANLINK HS
900D: LAN extender/data link with duplexer. Provides Ethernet bridge at 1 Mbps/512
kbps and two RS-232 channels at 1,200 bps to 115.2 kbps. Operates in 908-928 MHz
ISM band. Duplexer allows connection to existing 950 MHz antenna systems. Includes
two LanLink HS 900 radios and duplexers.
LANLINKHS900 List $3,990.00
LANLINKHS900D with duplexer List $4,990.00
Call BSW For Lowest Price: 800-426-8434
60
STLs
Moseley Event 5800
STL/TSL
The Moseley Event 5800 high
BRAND NEW!!
capacity digital aural STL/TSL
Get it First at BSW!
provides a bidirectional E1/IP link
capable of eight uncompressed
stereo audio streams and IP for
remote networking applications.
The Event 5800 transports up to nine radio stations with uncompressed digital audio
over a single link. And it's bidirectional for backhaul of confidence monitor, RPU, or
satellite downlink. There is plenty of room for future expansion. Its IP Ethernet capacity
supports network applications, remote servers, surveillance and security, Internet,
and email connections. All remaining bandwidth unused by the audio transport can
be devoted to the IP network. Event combines conservative bandwidth allocation
with powerful Reed-Solomon Error Correction, Trellis Coded Error Correction, and an
interleaver to overcome multipath and channel impairments. Its separate IDU and
ODU design eliminates transmission line losses. IDU and ODU interconnect is done
at IF (intermediate frequency) using low cost coax cable. All the power goes into the
antenna where you need it. The Event 5800 operates in the ISM 5.8 GHz and U-NII 5.3
GHz unlicensed bands. There is no expensive coordination or time consuming licensing
process. An Event system can be up and running in a matter of hours.
EVENT5800
List $9,995.00
Call BSW For Lowest Price: 800-426-8434
APT WorldNet Oslo STL
System over IP
Olso’s IP-STL System delivers
anywhere from 4 mono / 2 stereo
to 28 mono / 14 stereo channels of linear
PCM or apt-X encoded audio over IP lines. Both analog and AES /EBU audio
modules are available enabling paths at 15 kHz for FM and 20 kHz for HD Radio. Solid
dependability comes courtesy of DSP-based architecture, hot-swappable modules,
passive backplane and a wide variety of failsafe options including redundant PSUs
and automatic back-up switching.
APT WorldNet Oslo STL System Over T1
The WorldNet Oslo T1-STL system is a powerful, modular solution for transmitting
broadcast grade audio over T1 lines with minimal delay. Highly configurable, the rocksolid platform enables the transfer of either linear or apt-X encoded audio with digital
or analog inputs/outputs. On the entry level digital system, two AES /EBU Paths can
be sent at 15 kHz over a T1 for FM 1 & 2. An Ethernet input is also available to transport
HD 1 & 2 UDP streams to the Transmitter site in parallel with the audio streams. Backup T1 transport modules provide cross-connect functionality and advanced network
features such as drop and insert, drop and copy, and backup schemes, in addition to
simple unprotected point-to-point links.
Call BSW For A Custom Configuration Today
APT WorldCast Horizon STL System Over IP
This professional and affordable STL
system provides a fully duplex stereo
pair over IP with broadcast-grade audio
quality and exceptionally low delay. In addition to audio transmission, the IP interface
offers extensive management and monitoring via APT’s highly acclaimed Codec
Management System (CMS) Software. The CMS enables easy set-up of many flexible
network configurations for unicast, multicast and multiple unicast applications and gives
the broadcaster detailed control over parameters such as packet size, QoS levels & jitter
buffers. Ensuring resilience to tandem coding artifacts, the WorldCast Horizon utilizes nondestructive Enhanced apt-X coding for high quality audio delivery. With a coding delay of
under 2ms, Enhanced apt-X technology is preferred for sending audio over IP networks.
The unit delivers frequency responses of 7.5 kHz (AM), 15 kHz (FM) as well as 20 kHz for HD
applications. A DSP-based architecture ensures rock-solid reliability and the unit also offer
7 Contact Closures, 4 Opto-Inputs and an RS232 Data Channel. Both analog and digital
(AES/EBU with external reference) units are available.
APT WorldCast Horizon STL System over T1
Designed specifically for HD Radio STLs, the WorldCast Horizon T1-STL system delivers a fully
duplex stereo pair of high-quality, low-delay audio between locations. In addition to the T1
interface for audio transmission and control, the WorldCast Horizon provides an Ethernet
input enabling the broadcaster to transport an HD UDP stream in
parallel with the audio stream to the transmitter site. WorldCast Horizon helps broadcasters
eliminate issues of cascading MPEG codecs on HD Radio links. Utilizing non-destructive
Enhanced apt-X coding technology, the unit delivers artifact-free, broadcast-grade audio
quality with under 2ms delay. Available with either audio or digital (AES/EBU) I/Os, the unit
offers frequency responses of 7.5kHz (AM), 15kHz (FM) and 20kHz (HD).
Call BSW For A Custom Configuration Today
order/info: 1·800·426·8434 • www.bswusa.com
Deliver
Audio, Data
& Telephone
Over T1
Harris Intraplex STL HD and STL HD PLUS:
Choose Uncompressed or Compressed Audio Systems
The Harris Intraplex STL HD is a digital Studio-to-Transmitter Link (STL) system specifically
designed for IBOC conversion for HD Radio. It is an ideal choice for a single studio-totransmitter link or multi-location wide area audio, telephone and data network. You can
deploy it as a wide area audio and data transport network allowing multiple locations
to share talent and administrative resources, reducing operating costs. These other
applications “ride for free” with the program audio. The STL HD operates over all types
of T1 circuits: private, public leased (telco) circuit, microwave and Spread Spectrum
radio or T1 subcarrier over video microwave.
The basic IX-STLHD package provides linear 16-bit uncompressed audio transfer. The
system includes two T1 multiplexers, one each 48/44.1 kbps linear stereo audio encode
and decode modules with audio connections and a universal AC power supply. Both
analog and AES/EBU digital inputs and outputs are provided. The IX-STLHDPLUS
provides 24-bit apt-X compressed audio transfer rather than uncompressed audio.
Intraplex systems are modular/expandable to multiple systems and you may add
additional compressed or uncompressed audio , data, and telephone cards. You may
also add a CrossConnect server for point-to-multipoint systems. Call for details.
MAIN Features:
• 24 chnls 16-bit uncompressed audio (IX-STLHD) or 24-bit compressed (IX-STLHDPLUS)
• 44.1 kbps audio modules take full advantage of IBOC conversion for HD Radio
• Unique features support IBOC including built-in data channel for program associated
data, digital and analog I/O and AES timing clock input
• Across town or across country, digital audio is crystal clear regardless of distance
• STL HD is inherently bi-directional and allows simultaneous transport of TSL backhaul,
plus LAN data, telephone circuit or remote control over the same link
• IntraGuide software provides system control
• Send program audio,
data signals and phone
simultaneously
• Point-to-point or pointto-multipoint setups
•U
ncompressed audio
or apt-X algorithm
for highest quality
compressed audio
• S oftware or hardware
control
BSW has low prices on all Harris Intraplex products. Call us for your price
quote on these models or any Intraplex product.
Harris Intraplex NetXpress STL Over IP
IX-STLHD
STL HD Pkg T1 w/ 16-bit Uncompressed Stereo Audio List $6,615.00
IX-STLHDPLUS STL HD Pkg T1 w/ 24-bit Compressed apt-X Audio List $10,800.00
Harris brings the reliability and quality of Intraplex to IP audio transport with the
new Intraplex NetXpress IP multiplexer. As the industry’s first truly integrated,
managed platform, NetXpress offers a complete set of management controls
designed to handle the most complex audio contribution/distribution networks.
With NetXpress, you get Packet Size Control. This allows you to control packet
size for every stream. If low delay is critical to your operation, you can set packet
size to a minimum and the packetization delay can be kept below 3 ms. Jitter
buffer is user-adjustable to accommodate all IP network conditions, and Forward
Error Correction rebuilds lost or dropped packets to restore audio quality before
playout. Call BSW to learn more about STL over affordable and easily accessible IP.
With NetXpress, what was not before possible, is now possible over IP!
Call BSW For Lowest Price: 800-426-8434
Call BSW For Lowest Price: 800-426-8434
STL Comparison Chart
Mfr.
Product
Medium
Analog/Digital
APT
APT
Harris
Harris
HARRIS
MARTI
MOSELEY
MOSELEY
MOSELEY
MOSELEY
MOSELEY
MOSELEY
MOSELEY
TFT
TFT
TFT
WORLDCAST HORIZON
WORLDNET OSLO
IX-STLHD
IX-STLHDPLUS
IX-HDL SERIES
STL20C & SR20C
LANLINK900D
SL9003Q2S
SL9003Q4S
SL9003Q2SLAN
SL9003Q4SLAN
SL9003T1
EVENT 5800
5200
460-467
5115-52990
IP
T1, E1, ISDN
T1, E1
T1, E1
RF
RF
RF
RF
RF
RF
RF
T1, E1
RF
RF
RF
RF
Digital
Digital
Digital
Digital
Digital
Analog
Digital
Digital
Digital
Digital
Digital
Digital
Digital
Analog
Digital
Analog
Number of
Audio Channels
2
<28
Custom
Custom
Custom
2
Zero
2
1
1
2
2
ZERO
Mono, Composite
<6
2
Data Channel
RS232
Optional
RS232
RS232
RS232
No
10Base-T, RS232
RS232
RS232
544 Kbps
384 Kbps
RS232
10Base-T, T1
No
RS232
NO
List Price
$2,900.00
Custom
Custom
Custom
Custom
$3.000.00 ea.
$4,990.00
$12,950.00
$16,250.00
$15,450.00
$18,750.00
Custom
$9,995.00
$4,695.00
$22,500.00
$3,995.00
Sold as Single or
as System Pair
Single
Single
Pair
Pair
Pair
Two Singles
Pair
Pair
Pair
Pair
Pair
Pair
Single
Pair
Pair
Pair
STLs
61
order/info: 1·800·426·8434 • www.bswusa.com
Intraplex HD Link
Digital 950 MHz STL for Radio
•P
owerful, reliable RF performance
•S
uperb multichannel audio performance
•C
onvenient setup
Half Page APT
Ad Goes Here,
The Harris Intraplex HD Link offers RF power to spare, an integrated IP gateway for
plug-and-play backhaul using any IP service, straightforward management of data and up
to four channels of great audio. The intuitive front panel and remote interfaces tap into the most complete feature set of any microwave STL, yet take less
time to configure. Intraplex is broadcasting’s first choice for rock-solid, full-time operation of T1 and IP audio and data links. With HD Link, you can now count
on the same dependable performance, superior support and long-term value for your microwave links.
coming
Features:
•U
p to 5 Watts of RF power, user-selectable
•H
arris-designed transmitter and receiver with 200, 300 or 500 KHz of RF bandwidth
• Integrated IP channel for HD Radio
• Two prioritized Ethernet ports
• One or two stereo primary program channels
• User-selectable 48, 44.1 or 32 kHz sample rates
• T wo monaural, 7 kHz audio channels for SCA, EAS or other auxiliary audio
IX-HDL950-C
IX-HDL950-CC
IX-HDL950-IP
IX-HDL950-L
IX-HDL950-LC
IX-HDL950-LL
•A
dvanced Web browser user interface and SNMP remote management
•U
SB port for saving configurations and updating software
• F ront-panel Ethernet port for access to Web GUI and diagnostics
•X
LR AES/EBU digital and L/R analog input/output connectors
•U
ser-configurable control input and alarm output contacts
•A
nalog level outputs
ne compressed stereo plus IP, aux audio, and one async (9.6kbps) data channel.
O
List $15,750
Two compressed stereos plus IP, aux audio, and two async (9.6kbps) data channels
List $19,550
IP and aux audio transport only
List $11,950
One linear stereo plus IP, aux audio, and one async (9.6kbps) data channel.
List $14,750
One linear and one compressed stereo plus IP, aux audio, and two async (9.6kbps) data channels. List $18,550
Two linear stereos plus IP, aux audio, and two async (9.6kbps) data channels
List $17,550
Call BSW For Lowest Price: 800-426-8434
MARTI STL20 Series STL
Transmitters/Receivers
Harris HDE-200 HD Radio Exporter
The Harris HDE-200 FlexStar exporter delivers multiple HD-R programs over a dedicated IP connection. It supports
TCP over IP transport of the E2X protocol, as well as HD Protocol (HDP), a new transport layer protocol that enables
IP distribution from a central studio to multiple transmission sites. It offers remote and front-panel metering and
monitoring features, an internal GPS module, diversity delay, and connection for an Arbitron People Meter.
Features:
• Front-panel controls, display, confidence monitoring, pre/post delay audio level indicators
and headphone jack
• Inclusive studio interface; opto-isolated control and status, with current limited source supplies
• Comprehensive GUI via PC interface over Ethernet
• Integrated 3-port 10/100 Ethernet switch
• USB port
• Latest iBiquity 4.0 software featuring TCP or UDP/IP and HDP transport protocol for added reliability
• Fully compatible with Harris HDX-100 Exciter and HDI-100 Importer running v4.0 software
HDE-200
List $9,995.00
Call BSW For Lowest Price: 800-426-8434
The STL-20C composite transmitter and companion
SR-20C receiver form a high-quality, frequency
synthesized, radio link. Depending upon the available
bandwidth, the systems can transmit composite stereo
with two subcarriers, or digital stereo audio when used
with external modems. Features: unexcelled composite
stereo separation, low noise and low distortion; 20 watts
of power. For mono operations, choose the STL20M.
Separate right and left units can be linked for stereo
operation with greater interference rejection, superior
noise specifications and lower channel crosstalk than
most composite systems. Four optional sub-channels
are available. The SR20M is the mono receiver.
STL20
SR20C
STL20M
SR20M
Composite transmitter Composite receiver Mono transmitter Mono receiver
Call BSW For Lowest Price: 800-426-8434
TFT Economical Analog STL System
The TFT 5200 Series analog STL features up-to-the-minute technology
in a budget-friendly package. Consisting of a transmitter and receiver pair, the TFT
5200 delivers a composite or mono signal with maximum flexibility and minimum of
adjustment or configuration. The transmitters have a nominal output of 10 Watts (also
available with 20 watt transmitter #5115-5290HP). The receivers have improved sensitivity
for optimum fade margin and reliability, and built-in automatic switchover. The RF entire
system is frequency agile and set by software from the front of the transmitter and
receiver. Up/down pushbuttons let you select the desired frequency. 1.7 GHz-140 MHz
(in 20 MHz sub-bands); 6.25 kHz step. Selectable pre-/de-emphasis; direct FM modulation.
5115-5290
5115-5290HP
5116-5290HP
62
STLs
10-watt STL system
List $3,995.00
20-watt STL system
List $4,495.00
additional 20-watt STL transmitter only List $2,847.50
List $3,000.00
List $3,000.00
List $1,835.00
List $1,835.00
Call BSW For Lowest Price: 800-426-8434
order/info: 1·800·426·8434 • www.bswusa.com
BSW: Your Headquarters
Harris Quality. Harris Reliability.
Harris ZX Series Compact, Tri-Mode Transmitters
Based on the world-class Platinum Z series, Harris ZX compact FM transmitters excel as small market main analog
transmitters, are ideal for HD Radio applications at the largest stations and also perform admirably as emergency “Flyaway”
FM transmitters. They support Tri-Mode operation with on- the-fly switching between analog, FM and HD Radio common
amplification or HD Radio digital-only operation, making an HD Radio upgrade a snap. A hinged front panel offers
excellent access to interior components for ease of maintenance. Built-in RF directional couplers provide accurate power
measurement and an RF sample port with a rear mount BNC connector is perfectly suited to drive test equipment such as a
modulation monitor or spectrum analyzer. The flexibility of the ZX design allows a wide range of exciter options for quality
analog performance; MICROMAX with front panel frequency selection and optional AES input; DigitCD, the world’s most
popular FM exciter, known for outstanding performance; FlexStar, unrivaled performance and features for FM and HD Radio.
These transmitters are available with the FlexStar, DigitCD or MicroMax exciters (at an additional cost). Call BSW to order.
(You can also use the ZX with any standard 50-watt FM exciter).
FEATURES
• 500, 1000, 2000, 3500 and 5000 watt models
• Tri-Mode operation; FM, FM + HD Radio, HD Radio only
• "Hot-Pluggable" field proven Z FM linear RF amplifier
modules rebiased on-the-fly
• "Hot-Pluggable" auto-ranging power supplies
• Built-in MOV transient voltage suppression on
incoming AC mains lines
ZX500
ZX1000
ZX2000
ZX3500
ZX5000
500 watts
1000 watts
2000 watts
3500 watts
5000 watts
List $9,500.00
List $13,000.00
List $23,000.00
List $29,000.00
List $39,900.00
• Internal harmonic filter with high energy DC return for
lightning protection
•B
uilt-in parallel interface for remote control, status and
metering; RFI and transient protected
•P
roportional VSWR foldback for safe operation at
reduced power into marginal loads (icy antenna, etc)
•A
utomatic restart after AC mains interruption; returns
to previous operational mode
Call BSW for All Harris Transmitters!
Call BSW For Lowest Price: 800-426-8434
Harris Exciters
The Harris line of Exciters offers superb quality with feature sets to meet most any station’s
needs. The DIGIT CD FM exciter provides true 16-bit digital audio quality and allows direct
connection of standard AES3 stereo audio data to eliminate distortion and alignment
problems associated with analog program paths. Its N+1 frequency agility permits on-thefly switching of frequencies. The compact, N+1 frequency-agile MicroMaxAnalog analog
FM Exciter combines time-proven PLL technology with modern RF amplifier circuits and
abundant features to provide high quality driving power (also available in digital AES/EBU
MicroMaxDigital). The Tri-Mode, N+1 frequency-agile FlexStar HDX (HDFLEXFMHD22)
offers HD, analog FM, or FM+HD simultaneously. Its exclusive Real Time Adaptive Correction
continuously monitors the output of your transmitter and any filter or multi- station
combiner, while it automatically adapts for system non-linearities to keep your station well
within FCC compliance and maximize your coverage. For HD Radio implementation, the
Harris HDE-200 Program Exporter (for a full description, see page 53) is also required. The
HDFLEXFM11 is an analog, FM-only FlexStar exciter, offering unsurpassed FM audio quality
and an efficient, easy to service interior. Its compact design eliminates external racks. Only
12" deep it fits in any Harris transmitter. Visit our website for full specs.
DIGITCD
MICROMAXANALOG
MICROMAXDIGITAL
HDFLEXFMHD22
HDE-200
HDFLEXFM11
Designed and manufactured in the USA, PTEK solid-state,
no-tune FM exciters/transmitters cover 150 to 500 watt
power ranges and offer full remote control ability. All three
models, the 150-watt FM150ES, the 300-watt FM300ES and
the 500-watt FM500ES has built-in FSK ID (programmable
from the front panel) for Translator use. Frequency stability is
ensured by using PLL (phase locked loop) frequency synthesis
from a highly stable crystal oscillator. The Series includes
over-temperature protection and VSWR fold back to protect
the unit by automatically reducing power to a safe operating
level. Digital front panel metering indicates forward and
reverse RF power; deviation; final output volts and amps. The
frequency is easily set from the front panel. Meets or exceeds
all FCC and CCIR standards. The FM150ES & FM300ES are FCC
type certified for use on LPFM stations.
The KW series of power amplifiers and transmitters offers
1KW to 5KW output power with high reliability and ease
of use. Each system consists of a number of 1KW power
amplifiers (depending on the total power rating), a combiner,
splitter, and exciter. Each 1KW power amp module can
TRANSMITTERS
List $8,000.00
List $2,995.00
List $3,520.00
List $18,995.00
List $9,995.00
List $10,995.00
Call BSW For Lowest Price: 800-426-8434
PTEK FM Transmitters
64
Digital FM Exciter
1 RU Analog FM Exciter
1 RU Digital FM Exciter
FlexStar HD+FM Exciter
FlexStar Exporter
FlexStar Analog FM Exciter
operate independently, so you stay on the air even when
modules are removed for servicing. A module failure results
in a power reduction, not a shutdown. They are totally
solid-state, requiring no tuning from 87-108MHz and are
capable of full remote control operation. Fully SWR and overtemperature protected, they require only 15 watts drive to
achieve full rated output power. BSW carries the entire PTEK
line of transmitters, power amplifiers and accessories. Call us
or visit our website to find exactly what you need. Additional
models available.
FM150ES
FM300ES
FM500ES
FM500
FM1000
1KW-TX
2KW-TX
3KW-TX
4KW-TX
5KW-TX
150W FM Exciter/Transmitter
300W FM Exciter/Transmitter
500W FM Exciter/Transmitter
500W FM Power Amplifier
1KW FM Power Amplifier
1KW FM Transmitter
2KW FM Transmitter
3KW FM Transmitter
4KW FM Transmitter
5KW FM Transmitter
List $3,564.00
List $4,617.00
List $6,050.00
List $4,700.00
List $8,200.00
List $10,962.00
List $16,350.00
List $24,000.00
List $31,200.00
List $38,400.00
Call BSW For Lowest Price: 800-426-8434
order/info: 1·800·426·8434 • www.bswusa.com
for
Great
Transmitters!
Trusted Crown FM Transmitters: In for the Long Haul
Crown FM Transmitters
Crown FM Transmitters are available in sizes from 30 to 4000 watts. They include built-in audio
processing and stereo generation in a rugged, compact unit. They’re complete standalone
systems: audio in, radio signal out. Each model provides excellent signal quality with a variety of
features including quick setup, built-in digital metering and diagnostics, user-selectable operating
frequency range of 87-108 MHz, operates from 100-240VAC. With Teflon circuit boards and copper
heat spreaders in the RF chain, the unit functions with less heat for improved life span. BSW sells
Crown at the lowest prices in the industry. Call us for your Crown FM transmitter today.
Crown FM Translators (look for the R in the model number) include an internal receiver and
a powerful transmitter. Just what you need to get your signal to the furthest reaches of your
coverage area. Call BSW today for the lowest price quote.
FM30T
FM150T
FM300T
FM600T
FM1000T
FM2000T
FM4000T
30-watt FM
150-watt FM
300-watt FM
600-watt FM
1-kw FM
2-kw FM
4-kw FM
List $4,195.00
List $5,795.00
List $6,895.00
List $8,995.00
List $15,795.00
List $20,995.00
List $41,885.00
FM30R
FM150R
FM300R
FM600R
30-watt FM translator
150-watt FM translator
300-watt FM translator
600-watt FM translator
List
List
List
List
$4,195.00
$5,795.00
$6,895.00
$8,995.00
Call BSW For Lowest Price: 800-426-8434
BSW Offers Low
Package Pricing!
Call or Email Us Today
for Discount Pricing!!
Armstrong AM and FM Transmitters
BSW is proud to carry the full line of Armstrong’s rock solid FM and AM transmitters
(compatible with HD Radio), designed for continuous use and celebrated for high reliability.
Their STX series of solid-state FM transmitters features advanced thermostatic protection,
a CD-quality Exciter, metering/alarm indications and redundant power supplies. Available
models range from 650W to 12.5 kW.
Their single tube T2 series of FM transmitters boasts a grounded grid, broadband PA design
with no neutralization, exceptional tube life and the lowest possible noise levels. Also featuring
comprehensive thermostatic protection, this series is available in models from 10 kW to 50 kW.
The compact X series of AM transmitters offers high quality audio with optimized multiphase
modulation and 90% PA efficiency. 500W and 1kW models are available.
Call BSW to find the right Armstrong model for your needs!
Call BSW For Lowest Price: 800-426-8434
QEI Quantum
FM Transmitters
Designed for years of trouble free service, these
totally solid-state FM transmitters provide an
unsurpassed broadcast signal.
The Quantum M-Series of 1.2 to 5.4 kilowatt
transmitters use modular power amplifiers and
are available in 600 watt increments. You can
buy precisely the amount of power you need.
For broadband, the Quantum MBB-Series of
2 kilowatt and 5 kilowatt broadband solidstate transmitters also feature modular power
amplifiers comprised of two FETs combined
for 500 Watts of broadband output power.
They boast a new Super-Linear FMO for
superior performance. Both the 2-kilowatt
Quantum M2BB and the 5-kilowatt Quantum
M5BB operate with high efficiency, giving you
additional savings in power consumption and
reduced heat loads.
For even higher power QEI transmitters, such
as QEI’s 30 kW with exciter, call your BSW sales
representative.
Call BSW with your requirements.
FM2500B
FM12500B
FM10000T2
FM35000T2
X500B
X1000B
2.5kW solid-state FM
12.5kW solid-state FM
10kW single tube FM
35kW single tube FM
500W solid-state AM
1000W solid-state AM
List List List List List List $18,250.00
$89,825.00
$44,750.00
$74,850.00
$8,850.00
$10,950.00
Marti FM Transmitters
The new Plug-n-Play 150 FM transmitter gives
you all the reliability, performance, ease of use
and support that you've come to expect from
Marti. The Plug-N-Play products use the latest
in digital RF technology coupled with proven
exciter technology from Broadcast Electronics.
The exciter portion of the transmitter takes
advantage of recent advances in DSP speed and efficiency to provide performance
previously not available in this price range. Along with this ground breaking digital
technology, the Plug-N-Play product line takes advantage of control and RF amplifier
designs that have been proven through years of reliable use in the Broadcast
Electronics exciter lines. Features: accepts analog or digital audio input from an STL,
ISDN or direct feed.; built-in stereo generator and colorless audio processor; up to 150
watts; frequency range: 87.5 MHz to 108 MHz- jumper selectable to specific operating
frequency; programmable in 10kHz steps; full remote control ready; easy to install, rack
mountable or suitable for table top operation; digital inputs: AES/EBU, S/PDIF, TOSLINK;
analog inputs: composite, left and right, audio..
PNP150
150-watt FM transmitter
List $4,950.00
Marti Subcarrier Generator and Demodulator
The Marti SCG10 subcarrier generator inserts an auxiliary 5KHz audio channel into your
FM broadcast signal. SCD10 decodes the SCA signal from the composite signal of a
tuner at the receive end.
SCG10 List $843.00 SCD10 List $843.00
TRANSMITTERS
65
order/info: 1·800·426·8434 • www.bswusa.com
Audemat Digiplexer 246 Audio Processors
Customizable with Transmitter/Translator
The Digiplexer 246 is a versatile “Radio All In One” product that incorporates digital
audio processors, basic RDS encoder, a stereo encoder plus additional optional
functionality such as full RDS encoder, embedded audio backup, FM Transmitter (up
to 100 watts) and TCP/IP connectivity (all sold separately). A powerful DSP hardware
platform gives you performance levels of 192 kHz for the main audio processing and
1.5 MHz for the final limiter. A large color GUI makes operation a joy. Available in two
versions – a 2-band version for soft and medium formats and a 4-band version for
all formats.
DIGIPLEXER246-2B 2-band processor
List $5,590.00
DIGIPLEXER246-4B 4-band processor
List $7,590.00
DIGIPLEXERRDS
Full RDS encoder optionList $945.00
DIGIPLEXERHDD
80GB hard drive option List $450.00
Call for Transmitter OPtions
Audemat Digiplexer 214 Audio Processors
The Audemat Digiplexer 214 is a unique digital audio processing product (available
in 2- or 4-band versions) that incorporates a digital stereo encoder, Standard RDS
encoder and TCP/IP connectivity, as well as additional innovative options such as an
80 GB embedded audio backup hard drive, or Full RDS encoder—all in a rugged 1U
rackable enclosure. The Digiplexer’s audio processor operates at a sampling frequency
of 192 kHz for the main audio processing and 1.5 MHz for the final limiter to deliver
the highest quality sonic signature while maintaining a loud and competitive sound.
DIGIPLEXER214-2B
DIGIPLEXER214-4B
DIGIPLEXERRDS
DIGIPLEXERHDD
2-band processor
List $4,990.00
4-band processor
List $6,990.00
Full RDS encoder optionList $945.00
80GB hard drive option List $450.00
Call BSW For Lowest Price: 800-426-8434
Call BSW For Lowest Price: 800-426-8434
RF Transmission
BSW carries everything you need from the best names in the
business. On the next 6 pages, you’ll find antennas, loads,
measurement, protection and all transmission accessories.
MARK
ANTENNAS
COAXIAL
DYNAMICS
Transmission System Components
Loads
Resistive loads for transmitter testing off-line. Power ranges from
5KW to 50KW. Please note that this is only a sampling. Contact your
BSW professional for additional items.
Air Cooled
Altronic
6705E1 5 KW Load, 1 5/8” Eia Flange
6405N 5 KW Load , N-Connector
6705E1 5 KW Load, 1 5/8” Eia Flange
6710E3 10 KW Load, 3 1/8” Eia Flange
6725R3 25KW Load
RF Safety Switches
Dielectric
R001A23501 3-1/8” RF Lockout / Tagout
List $7,050.00
Combiners / Splitters
List $2,966.00
List $2,002.00
List $2,966.00
List $4,455.00
List $6,031.00
Coaxial Dynamics
84005N Liquid/Air (Oil), 500 W Max, N (F) Connector
List $624.00
Electro Impulse
DACT5KFM 5 KW Load, 1 5/8” Flange
List $3,190.00
DPTC50KFM 50 KW Load, 3 1/8” Flange
List $7,290.00
Water Cooled
Altronic
9705E3 5KW, 3 1/8 EIA Flange
List $979.00
9715E3 15 KW Water Cooled Load, 3 1/8” Eia Flange
List $1,329.00
9750E3 50KW, 3 1/8” EIA Flange
List $2,692.00
Call BSW For Lowest Price: 800-426-8434
66
Call BSW For Lowest Price: 800-426-8434
RF EQUIPMENT – TRANSMISSION
Combiners permit two transmitters to share a common antenna.
Splitters allow two receivers to share a common antenna. We carry
combiners and splitters from Dielectric, ERI, Jampro and Kintronic.
Please call for more info.
Dielectric DFC08003BR2 Branched Combiners 5KW Max per Input
List $16,600.00
RF Transfer Switches
Remotely controlled, motorized switches re-route transmitter output to alternate antenna, or standby transmitter to main antenna.
Please note that this is only a sampling. Contact your BSW professional for additional items.
Delta
6730E1
6732E1
6740B
6742B
1-5/8” 120 VAC 50/60HZ 0-900 MHZ Coaxial Transfer List 1-5/8” 240 VAC 50/60 HZ 0-900 MHZ Coaxial Transfer List Coaxial Transfer Switch, 3-1/8”,120 VAC,0-216MHZ List Coaxial Transfer Switch 3-1/8”, 240 VAC, 0-216 MHZ List $3,965.00
$4,225.00
$8,750.00
$9,630.00
Call BSW For Lowest Price: 800-426-8434
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
order/info: 1·800·426·8434 • www.bswusa.com
Isocouplers
Coupler / RF Directional
Permits sampling of the signal from a transmission line.
Please note that this is only a sampling. Contact your BSW
professional for additional items.
Allows an FM or STL antenna to be mounted on an active AM tower.
Please note that this is only a sampling. Contact your BSW professional
for additional items.
Dielectric
R0005500501 3-1/8” Directional Coupler
List Coupler / IBOC
$980.00
Similar to RF Directional coupler above, but for HD AM systems. Please note that this
is only a sampling. Contact your BSW professional for additional items.
Dielectric
R98809
3 1/8” 10 dB Coupler
List $5,650.00
Impedance Bridge
Measures the operating impedance of antennas, networks,
transmission line sections, and the common point of directional
antenna systems while they are functioning at operating power
levels. Please note that this is only a sampling. Contact your BSW
professional for additional items.
Delta
OIB1
Impedance Bridge With 12” Leads
List $5,100.00
OIB-3
Impedance Bridge With 12” Leads
List $7,525.00
RG4B-120
Receiver/Generator, 120 VAC with Batteries
List $15,500.00
Kintronic
FMC0.1
FMC0.2P
FMCO.5B
FMC1.5
Isocoupler - 100 W, 700 to 975 MHz
Isocoupler - 200 W, 935 to 985 mHz for STL
Isocoupler - 500 W, 150 to 699MHz
Isocoupler - 1.5 KW, 88 to 149 MHz
These filters reduce intermod and spurious output. We also carry filters fom Coaxial
Dynamics, ERI, Kintronic and Jampro. Please call for info.
Filter / High Power FM
Dielectric
1100000743135kW High Power 4 Stage Bandpass Filter
List $22,090.00
Filter / Low Power
Dielectric
R004A44201 2.5kW Low Power 4 Stage Bandpass Filter
List $8,699.00
Filter / Notch Filter
Dielectric
DFF14002BS Dual Cavity Notch Filter without blowers
List $9,940.00
Call BSW For Lowest Price: 800-426-8434
Antennas/ High power
Antennas / Med
Power
Side-mounted, circular polarized FM
transmit antennae for power levels
up to 40 KW. (Several part numbers
have a “1” at the end, which indicates
a single antenna element. These
may be configured up to 8 or more
elements, so these are all available in
multi-bay sizes.) Please note that this
is only a sampling. Contact your BSW
professional for additional items.
Jampro
JHPC1
FM High Power Broadcast, 8 Bays
FM High Power Broadcast, 1 Bay
Side-mounted, circular
polarized FM transmit
antennae for power
levels up to 10 KW. (Several part numbers have a “1” at the
end, which indicates a single antenna element. These may be
configured up to 8 or more elements, so these are all available
in multi-bay sizes.) Please note that this is only a sampling.
Contact your BSW professional for additional items.
List $42,800.00
List $4,935.00
Antennas / Low Power
Side-mounted FM transmit antennae for power levels up to 1
KW. Circular, horizontal, or vertical polarized models available.
(Several part numbers have a “1” at the end, which indicates a
single antenna element. These may be configured up to 8 or
more elements, so these are all available in multi-bay sizes.)
Please note that this is only a sampling. Contact your BSW professional for additional items.
Dielectric
DCR-C6
Circularly Polarized, 6 Bays
List $24,480.00
ERI
SHPX-6AC
LPX4CHW
6 Bay, 3 1/8’’ Line Input 4-Bay Antenna System
List $26,145.00
List $13,063.00
Jampro
JMPC1S
Side Mount FM, 1Bay
List $3,520.00
Antennas / STL / RPU
Popular Yagi, Log Periodic, and Grid models for
use in the 160, 450 and 950 MHz bands. Please
note that this is only a sampling. Contact your
BSW professional for additional items.
Dielectric
DCR-H4
Circularly Polarized, 4 Bays
List $12,545.00
Jampro
JLCP-1
JLPC1
JLVP1
JLHP1
Circular Sidemount, 1 Bay
Side Mount FM, 1 Bay
Vertical Dipole FM Broadcast, 1 Bay
Horizontally Polarized FM, 1 Bay
List $895.00
List $2,250.00
List $935.00
List $935.00
Kathrein, Log Periodic
CLFMRXHRM Antenna, Broadcast
List $699.00
CLFMVRM50N Broadband FM Antenna -50 OHM N Connector List $1,208.00
CLFMHRM75 FM Log Periodic Antenna
List $1,075.00
Kathrein, Dipole
FMV
Antenna, Dipole
FMVMP
Antenna, Medium Power
List $345.00
List $347.00
Kathrein, Yagi
YA7FMLURM
List $630.00
Yagi Antenna
$1,631.00
$1,025.00
$1,817.00
$1,817.00
Filters
Antennas
Dielectric
DCR-M8
List List List List Call BSW For Lowest Price: 800-426-8434
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
Kathrein
PR950
MF950B
MKPX2
Antenna, Paraflector
Antenna,940-960MHZ,Miniflector
Mounting Bracket 2.375”
List List List $832.00
$546.00
$27.00
Kathrein, Yagi
TY900
CA7-460
HDCA10-HCM
HDCA5HCM
HDCA5HRM
Yagi Antenna
Yagi Antenna 450-470 Frequency Range
Yagi FM Antenna.
Yagi FM Antenna
Antenna, Yagi, FM, 5 Element
List List List List List $158.00
$252.00
$720.00
$465.00
$525.00
Kathrein
YA7-FMH-HCM Yagi Receive Antenna
List $452.00
Marti
SC48
YC150
G6450-1
4 Ft Parabolic Antenna
Yagi Antennas
RPU Base Station Antenna
List $1,017.00
List $250.00
List $253.00
Mark
P9A72GNU
P9A96GNS
Antenna, 6’ Grid, 940-960 MHZ
Antenna, 6 Ft 4.5 Diameter Pipe
List $1,513.00
List $2,200.00
RF EQUIPMENT- TRANSMISSION AND ANTENNAS
67
order/info: 1·800·426·8434 • www.bswusa.com
Transmission Line
Call BSW For Lowest Price: 800-426-8434
Andrew Cable Call BSW For Lowest Price: 800-426-8434
The Andrew Corporation, world leader in the design and manufacture of communications equipment and systems, is well
known in the radio broadcast community for supplying high-quality transmission cable and related accessories. BSW is proud
to represent a complete line of products for all your transmission cabling requirements including HELIAX foam and air-dielectric
cable connectors and accessories, pressurization and accessories. HELIAX coaxial cable is designed to provide optimum
electrical performance for a wide range of RF applications. Call BSW for all your Andrew needs.
SIZE
TYPE
BSW ITEM #
POPULAR CONNECTORS
POPULAR HANGER
POPULAR GROUNDING KITS
KITS
1/4”
1/4”
1/4”
3/8”
3/8”
3/8”
1/2”
1/2”
1/2”
1/2”
1/2”
5/8”
5/8”
7/8”
7/8”
1 1/4”
1 5/8”
1 5/8”
2 1/4”
2 1/4”
3”
50 ohm - Foam - standard
50 ohm - Foam - Superflexible
75 ohm - Foam - Superflexible
50 ohm - Foam - standard
50 ohm - Foam - Extraflexible
50 ohm - Foam - Superflexible
50 ohm - Foam - standard
50 ohm - Foam - Superflexible
50 ohm - Air - standard
75 ohm - Foam - Standard
75 ohm - Foam - Superflexible
50 ohm - Foam - standard
50 ohm - Air - standard
50 ohm - Foam - standard
50 ohm - Air - standard
50 ohm - Foam - standard
50 ohm - Foam - standard
50 ohm - Air - standard
50 ohm - Foam - standard
50 ohm - Air - standard
50 ohm - Air - standard
LDF1.50
FSJ1-50A
FSJ1-75
LDF250
EFX2-50
FSJ250
LDF4-50A
FSJ4-50B
HJ4-50
LDF4-75A
FSJ4-75A
LDF4.5-50
HJ4.5-50
AVA5-50
HJ5-50
LDF6-50
AVA7-50
HJ750A
LDF12-50
HJ12-50
HJ850B
L1PNMH, L1PNF
FIPNM-HF, FIPNF
F1NM-7570, F1NF-7570
L2PNM-HC, L2PNF
E2PNM-H, E2PNF
F2PNMH, F2PNF
L4TNM-PS, L4TNF-PS, L4PNM-H. L444
F4PNMV2-H, F4PNF
H4PNM, H4PNF
L4NM-7550-H, L4NF-7550
F4NM7570, F4NF7570
L4.5PNMRC, L4.5PNFRC
H4.5PNM , H4.5PDM
AL5NF-PS, AL5NM-PS, AL5E78-PS
H5PNM, H5PNF, H5MBP-110, H5PDM
L6PNM-RPC, L6PNF-RPC
AL7E158-PS, AL7E78-PS, AL7NF-PSA, AL7NM-PSA
H7PDM, H7PNF
L12PDM ( NEW), L12PDF
H12PDM , H12PNF
H8MP302, H8MB302
11662-3
11662-3
11662-3
11662-3
11662-3
11662-3
43211A
43211A
43211A
43211A
43211A
42396A9
42396A9
42396A-5
42396A-5
423961
42396A2
42396A-5
42396A-4
42396A-4
31766A-11
223158-2
223158-2
223158-2
223158-2
223158-2
223158-2
241088-1
241088-1
241088-1
241088-1
241088-1
241088-7
241088-7
241088-7
241088-7
241088-3
241088-4
241088-4
241088-5
241088-5
223700-724
ERI Rigid Line Call BSW For Lowest Price: 800-426-8434
During broadcasting, RF heating of the inner and outer connectors causes differential expansion between them. With original-design
rigid transmission line, this expansion is compensated for with sliding metal bullets. Eventually this produces wear, hot spots—and burnout.
The solution to eliminating sliding-contact wear is to eliminate the sliding. All expansion of the patented ERI MACXLine inner connector is
taken up with a flexible, built-in bellows. Burnout and bullet replacement are eliminated. This advantage comes with no VSWR penalty or
significant cost premium. Each section comes complete with a bullet/bellows assembly, stainless steel flange hardware and pressure
sealing gasket. A full range of sizes is offered. Call BSW with your requirements.
POPULAR CONNECTORS, ADAPTERS
ITEM #
Description
STD050-10-120
7/8-inch, 50 ohm, 10-foot standard line section, flanged both
ends, supplied with inner connector, and flange hardware kit.
7/8-inch, 50 ohm, 10-foot standard line section, unflanged.
7/8-inch, 50 ohm, 20-foot standard line section, unflanged.
1-5/8-inch, 50 ohm, 20-foot standard line section, flanged both
ends, supplied with inner connector, and flange hardware kit.
1-5/8-inch, 50 ohm, 20-foot standard line section, flanged one
end, supplied with inner connector, and flange hardware kit.
STD050-29-120
STD050-31
STD150-1
STD150-11
STD150-21
STD350-1
STD350-31
STD350-6
1-5/8-inch, 50 ohm, 20-foot standard line section, unflanged.
POPULAR HARDWARE
RLA050-NF, STD050-52 , ACX050-10SE ,
RLA000-21
RLA050-NF, STD050-52 , ACX050-10SE ,
RLA050-NF, STD050-52 , ACX050-10SE ,
ACX150-20, ACX150-10SE, RLA150-050 , RLA150-NF,
STD150-52
ACX150-20, ACX150-10SE, RLA150-050 , RLA150-NF,
STD150-52
ACX150-20, ACX150-10SE, RLA150-050 , RLA150-NF,
STD150-52
RLA000-21
RLA000-21
3-1/8-inch, 50 ohm 20 foot standard line section flanged both
ACX350-10SE, ACX350-10SE-2 , ACX350-20, CR0007,
ends, supplied with captivated inner connector, and flange hardRLA350-150 , RLA350NF, STD350-52
ware kit.
ACX350-10SE, ACX350-10SE-2 , ACX350-20, CR0007,
3-1/8-inch, 50 ohm 20 foot standard line unflanged line section.
RLA350-150 , RLA350NF, STD350-52
3-1/8-inch, 50 ohm 19 foot standard line section flanged both
ACX350-10SE, ACX350-10SE-2 , ACX350-20, CR0007,
ends, supplied with captivated inner connector, and flange hardRLA350-150 , RLA350NF, STD350-52
ware kit.
RLA100-11-H , RLA100-21
RLA100-11-H , RLA100-21
RLA100-11-H , RLA100-21
RLA300-11-H
RLA300-11-H
RLA300-11-H
Dehydrators
Dehydrators are a must for keeping your transmission lines functioning properly.
Please note that this is only a sampling. Contact your BSW professional for additional items.
Dielectric
R66788
Air Dryer for Transmission Line
List $2,370.00
Andrew
40525B
40525B-4
MT050-81015
MT050B-81315
Low-pressure Dessicant, 3.0-8.0 psig
Low-pressure Dessicant, 1.0-5.0 psig
Low-pressure Membrane
Low-pressure Membrane
List $860.00
List $915.00
List $2,690.00
List $3,185.03
Call BSW For Lowest Price: 800-426-8434
68
RF EQUIPMENT – TRANSMISSION LINE
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
order/info: 1·800·426·8434 • www.bswusa.com
Dielectric Rigid Line Call BSW For Lowest Price: 800-426-8434
Dielectric is the world’s largest manufacturer of Rigid Coaxial Transmission Line. Their record of reliable service and superior quality,
as well as their ongoing research and development programs have kept Dielectric the industry’s leader. More Radio and TV stations,
utilizing rigid Coaxial transmission line, are on the air with Dielectric. Call BSW with your requirements.
ITEM #
ITEM DESCRIPTION
POPULAR CONNECTORS, ADAPTERS
R0021460501
1-5/8” 50 Ohm EIA Bolt Flanged
R0021460502
20’ Transmission Line with expansion
R0015310501
compensation
R0007465501
R0024580501
R0019955501
1-5/8” 50 Ohm Unflanged
R0020580504
20’ NF Transmission Line
R0020699501
R0021109504
R0019785501
3-1/8” 50 Ohm EIA Bolt Flanged
R0019785505
R58724
20’ Transmission Line with expansion
R0021675503
compensation
R13061
R0043461501
R0006813501
3-1/8” 50 Ohm Unflanged
R45406
20” Transmission Line NF
R0006816501
R0020568501
R0019581503
4-1/16” 50 Ohm EIA Bolt Flanged
R0023989501
R58762
20’ Transmission Line with expansion
R0028941503
compensation
R0019581504
R0028923502
R0028923501
4-1/16” 50 Ohm Unflanged
R0028928502
20’ Transmission Line NF
R0028942501
R14233
DC 675-017
6-1/8” 50 Ohm EIA Bolt Flanged
DC 675-018
R58915
20’ Transmission Line with expansion
R0008239502
compensation
DC 675-021
R42421
6-1/8” 75 ohm EIA Bolt Flanged
R42422
R58791
20’ Transmission Line with expansion
R39173
compensation
R65565
R0022331502
R0020811501
6-1/8” 50 Ohm Unflanged
R0020808501
20’ Transmission Line, NF
R0020839501
R0029945501
R00936325xx
7-3/16” 75 ohm EIA Bolt Flanged
R0093627515
R62262
20’ Transmission Line with expansion
R00842355xx
compensation
DC 777-080
R00722661xx
8-3/16” 75 Ohm EIA Bolt Flanged
R00722665xx
R59880
20’ Transmission Line with expansion
R00722662xx
compensation
R00722666xx
R00287161xx
9-3/16” 75 Ohm EIA Bolt Flanged
R00287163xx
R58295
20’ Trans. Line with expansion comR00287162xx
pensation
R00287164xx
R15834
POPULAR HARDWARE
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Reducer 1-5/8” to 7/8”
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Reducer 1-5/8” to N Male Unflanged
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Elbow 90° Equal Leg (Reinforced)
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Reducer 3-1/8” to 1-5/8”
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Elbow 90° Equal Leg (Reinforced)
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Reducer to 3-1/8”
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Elbow 90° Equal Leg (Reinforced)
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45 ° Unequal Leg
Elbow 45 ° Unequal Leg Reinforced
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 45° Unequal Leg
Reducer to 4-1/16”
Elbow 90° Equal Leg
Elbow 90° Equal Leg (Reinforced)
Elbow 90° Unequal Leg (Reinforced)
Reducer/Xformer to 6 1/8-50 Ohm EIA
Elbow 90° Equal Leg
Elbow 90° Unequal Leg
Elbow 90° Equal Leg (Reinforced)
Elbow 90° Unequal Leg (Reinforced)
Elbow 90° Equal Leg CH14-24
Elbow 90° Unequal Leg CH14-24
Elbow 90° Equal Leg (Reinforced) CH14-24
Elbow 90° Unequal Leg (Reinforced) CH14-38
R0046959502
Hardware Kit
R0046864504
R0004591504
Flange, Fixed, Silver Solder
Flange, Field, Mechanical
R0004575501
R0004740503
Hardware Kit
Flange Field Soft Solder
R0046868506
R0046864506
Flange, Swivel, Silver Solder
Flange, Fixed, Silver Solder
R0046959504
R0060301501
Hardware Kit
Flange, Field Soft Solder
R0046868507
R0046864507
Flange, Swivel, Silver Solder
Flange, Fixed, Silver Solder
R0004576501
R0004542501
Hardware Kit
Flange, Field Soft Solder
R0018135501
R0004542501
Anchor Connector Assembly
Flange Field Soft Solder
R0046868510
R0046864510
Flange, Swivel, Silver Solder
Flange, Fixed, Silver Solder
R62275
R62272
Hardware Kit
Flange Field Soft Solder
R0046959506
R0046792501
Hardware Kit
Flange Field, Soft Solder.
R0046959507
R0023309501
Hardware Kit
Flange, Field Soft Solder
MYAT Rigid Line Call BSW For Lowest Price: 800-426-8434
Broadcasters across the country and around the world rely on MYAT rigid transmission line systems and components. Available in sizes from 7/8" to
9- 3/16" MYAT products offer advanced design, superior materials and manufacturing expertise. From a single replacement part to an entire rigid
transmission line system designed for the most challenging broadcast environment, you can depend on MYAT. Their products deliver the
specifications and tolerances to provide maximum performance within high-power FM environments. Call BSW with your requirements.
ITEM #
Description
1 5/8" 50ohm Transmission Line
201-001
Line Assembly 20 Ft. Flanged
201-002-xxx
Line Assembly Flanged, Specify Length in Inches
201-004
Line Assembly 20 Ft. Unflanged
201-004-xxx
Line Assembly Unflanged, Specify Length in Inches
3 5/8" 50ohm Transmission Line
301-001
Line Assembly 20 Ft. Flanged
301-002-xxx
Line Assembly Flanged, Specify Length in Inches
301-004
Line Assembly 20 Ft. Unflanged
301-004-xxx
Line Assembly Unflanged, Specify Length in Inches
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
POPULAR CONNECTORS, ADAPTERS
POPULAR HARDWARE
201-014, 201-008, 201-009, 201-010, 201-021, 201-025 201-012, 201-011
301-014, 301-008, 301-009, 301-010, 301-021, 301-025 301-012, 301-011
RF EQUIPMENT – TRANSMISSION LINE
69
order/info: 1·800·426·8434 • www.bswusa.com
RF Power Measurement
Call BSW For Lowest Price: 800-426-8434
RF Power Meters
Power / RF Monitor / Alarms
Measures RF power in 50 ohm coaxial cable and transmission
lines. Order Line Sections and Elements elsewhere on page.
Please note that this is only a sampling. Contact your
BSW professional for additional items.
Measures forward and reflected power
simultaneously. Alarms and shuts down the
transmitter within 15 milliseconds of a fault.
Select Line Section and Elements elsewhere on page. Please note that this is only a
sampling. Contact your BSW professional for additional items.
Call BSW For Lowest Price: 800-426-8434
Coaxial Dynamics
81050Multi-Range Wattmeter 500 W, 25-1000 MHz
w/Non-Removable Element
List $541.00
81060Multi-Range Wattmeter 1500 W, 25-1000 MHz
w/Non-Removable Element
List $599.00
81000A Wattmeter Single Socket 5 W to 1000 W
List $289.00
81001AWattmeter Single Socket 5 W to 1000 W
with A/B Switched DC Input
List $378.00
81100A Wattmeter Single Socket Flanged 250 W to 25 KW List $746.00
81102A Wattmeter Dual Socket Flanged 250 W to 25 KW
List $863.00
81103A Wattmeter Dual Socket Unflanged 250 W to 25 KW List $843.00
81106A Wattmeter with 10’ Cable, Single Socket Flanged
List $746.00
81107A Wattmeter with 10’ Cable, Single Socket Unflanged List $635.00
81108A Wattmeter with 2-10’ Cables, Dual Socket Flanged
List $863.00
81109A Wattmeter with 2-10’ Cables, Dual Socket Unflanged List $843.00
81111A Wattmeter Single Socket Unflanged 250 W to 25 KW List $649.00
81113A Wattmeter Dual Socket Unflanged 250 W to 25 KW List $843.00
81115A Wattmeter with 10’ Cable, Single Socket Unflanged List $649.00
81117A Wattmeter with 2-10’ Cables, Dual Socket Unflanged List $857.00
81300A Wattmeter Single Socket Flanged 1000 W to 50 KW List $954.00
81301A Wattmeter Single Socket Unflanged 1000 W to 50 KW List $695.00
81302A Wattmeter Dual Socket Flanged 1000 W to 50 KW
List $1,074.00
81303A Wattmeter Dual Socket Unflanged 1000 W to 50 KW List $896.00
81306A Wattmeter Single Socket Flanged 1500 W to 60 KW List $954.00
81307A Wattmeter Single Socket Unflanged 1500 W to 60 KW List $695.00
81308A Wattmeter Dual Socket Flanged 1500 W to 60 KW
List $1,074.00
81309A Wattmeter Dual Socket Unflanged 1500 W to 60 KW List $896.00
81311A Wattmeter Single Socket Unflanged 1000 W to 50 KW List $707.00
81313A Wattmeter Dual Socket Unflanged 1000 W to 50 KW List $907.00
81315A Wattmeter Single Socket Unflanged 1500 W to 60 KW List $707.00
81317A Wattmeter Dual Socket Unflanged 1500 W to 60 KW List $907.00
Dielectric
11000001427 RF Scout FM 3 1/8” EIA
11000001426 RF Scout FM 1 5/8” EIA
List $4,380.00
List $3,870.00
Power / RF Ammeters
RF power measurement from
20KHz - 5MHz. Choose the DTCA
system, or select individual components from the list below. Please
note that this is only a sampling.
Contact your BSW professional for
additional items.
Meters with the “EXR” suffix provide an internal relay to remotely disconnect the rectifier circuit input from the RF input and ground the rectifier circuit.
The suffix “HV” appended to any of the TCA series model numbers specifies that the
current transformer supplied with the meter is the high voltage type rated for operation at conductor voltages as high as 28 kV peak (20 kVRMS).
The suffix “XHV” appended to any of the TCA series model numbers specifies that the
current transformer supplied with the meter is the extra high voltage type rated for
operation at conductor voltages as high as 60 kV peak (42.4 kVRMS).
Delta
TCA10EXR
TCA10EXHV
TCA10EXRHV
DTCA10HV
DTCA10XHV
Toroids
Delta
TCT1
TCT1XHV 70
924-005-007 RF Ammeter
Transformer Coupled RF Ammeter
Transformer Coupled RF Ammeter
Digital RF Ammeter
Digital RF Ammeter
List List List List List $1,350.00
$1,925.00
$5,870.00
$3,700.00
$6,960.00
Call BSW For Lowest Price: 800-426-8434
Transformer, .50V/A 42.4 KV Rating
Transformer, .50V/A 42.4 KV Rating
RF EQUIPMENT - RF MONITORING
List $550.00
List $4,250.00
Coaxial Dynamics
81070 Wattchman Station Monitor/Alarm System 2-30 Meters
List $1,201.00
81071 Wattchman Station Monitor/Alarm System 2-30 Relay Meters
List $1,516.00
81073 Wattchman Station Monitor/Alarm System l-30 Relay Meter
List $1,013.00
81074 Wattchman Station Monitor/Alarm System 1-30 Relay Meter
List $1,013.00
91090 Digital Wattchman Monitor/Alarm 100 W to 50,000 W List $1,206.00
91091 Digital Wattchman Monitor/Alarm 300 W to 30,000 W List $1,206.00
Power / Line Sections
Coaxial Dynamics
88500
7/8” 50 Ohm Single Socket Line Section
List $128.00
88500-1 7/8” 50 Ohm Single Socket Line Section
(3-5/8” Long)
List $139.00
88500-4 7/8” 50 Ohm Single Socket Line Section with
Navy Style DC Connector
List $144.00
88501 1-5/8” 50 Ohm Single Socket Swivel Flanged E.I.A.
List $345.00
88502 1-5/8” 50 Ohm Single Socket Unflanged
List $261.00
88503 3-1/8” 50 Ohm Single Socket Swivel Flanged E.I.A.
List $561.00
88504 3-1/8” 50 Ohm Single Socket Unflanged
List $339.00
88511 1-5/8” 50 Ohm 4-Port Socket Swivel Flanged E.I.A.
List $667.00
88512 3-1/8” 50 Ohm 4-Port Socket Swivel Flanged E.I.A.
List $878.00
88513 3-1/8” 50 Ohm Triple Socket Swivel Flanged E.I.A.
List $819.00
88514 1-5/8” 50 Ohm Dual Socket Swivel Flanged E.I.A.
List $436.00
88514D 1-5/8” 50 OHM Dual socket Swivel Flanged E.I.A.
List $401.00
88515 1-5/8” 50 OHM Dual Socket Unflanged
List $401.00
88515-2 1-5/8” 50 OHM Dual Socket Unflanged Recessed
List $416.00
88515D 1-5/8” 50 Ohm Dual Socket Unflanged
List $596.00
88516 3-1/8” 50 Ohm Dual Socket Swivel Flanged E.I.A.
List $646.00
88516D 3-1/8” 50 Ohm Dual Socket Swivel Flanged E.I.A.
List $841.00
88517 3-1/8” 50 Ohm Dual Socket Unflanged
List $463.00
88517-2 3-1/8” 50 Ohm Dual Socket Unflanged RECESSED
List $479.00
88525 7/8” 50 Ohm Single Socket Line Section (3-5/8” Long)
w/Mounting Bracket
List $134.00
88527 7/8” 50 Ohm Single Socket Line Section with Mounting Bracket
List $193.00
88529-2 7/8” 50 Ohm Dual Socket Line Section
List $281.00
88530 7/8” 50 Ohm Single Socket Line Section (3-5/8” Long) List $181.00
88531 7/8” 50 Ohm Single Socket Fixed Flanged E.I.A. Line Section
List $185.00
88534 7/8” 50 Ohm Single Socket Swivel Flanged E.I.A. Line Section
List $271.00
88535 7/8” 50 Ohm Dual Socket Swivel Flanged E.I.A. Line Section
List $398.00
88536-1 7/8” 50 Ohm Line Section
List $161.00
Power / Elements
Coaxial Dynamics
82020 Element 5 W, 50-125 MHz
List $75.00
82021 Element 10 W, 50-125 MHz
List $75.00
82022 Element 25 W, 50-125 MHz
List $75.00
82023 Element 50 W, 50-125 MHz
List $75.00
82024 Element 100 W, 50-125 MHz
List $75.00
82025 Element 250 W, 50-125 MHz
List 82026 Element 500 W, 50-125 MHz
List 82027 Element 1000 W, 50-125 MHz
List 82113 Element 250 W, 50-125 MHz
List 82114 Element 500 W, 50-125 MHz
List 82115 Element 1000 W, 50-125 MHz
List 82116 Element 2500 W, 50-125 MHz
List 82117 Element 5000 W, 50-125 MHz
List 82118 Element 10 KW, 50-125 MHz
List 82119 Element 25 KW, 50-125 MHz
List 82162 Element 300 W, 50-125 MHz
List 82163 Element 600 W, 50-125 MHz
List 92110 Element for 1-5/8” Line Systems 100 W, 54-108 MHz List 92116 Element for 1-5/8” Line Systems 10000 W, 54-108 MHz List 92313 Element for 3-1/8” Line Systems 1000 W, 54-108 MHz List 92314 Element for 3-1/8” Line Systems 2500 W, 54-108 MHz List 92318 Element for 3-1/8” Line Systems 50,000 W, 54-108 MHz List $75.00
$75.00
$75.00
$121.00
$121.00
$121.00
$121.00
$121.00
$121.00
$121.00
$121.00
$121.00
$394.00
$394.00
$394.00
$394.00
$394.00
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
order/info: 1·800·426·8434 • www.bswusa.com
Protection and Lighting
Call BSW For Lowest Price: 800-426-8434
Lightning Arrestors
Lighting Chokes
ERI produces a huge line of RF and structure products,
including lightning dissipation system. The Lightning Spur
operates as a shield to reduce potential between your
tower and storm cell by transferring electrical charge to
the adjacent ionizing air molecules. Call BSW with your
Transformers that permit the installation of AC power lines
on an AM tower for lighting.
Kintronic
LC-2-10
LC-3-10
LC-4-10
requirements.
ERI
LRK0005
Lightning Spur Kit
List $300.00
Copper strap for use in RF bus work and interconnections
in AM/MW tuning circuits.
34202000
34254000
34303000
1 ” x .020” Copper Strap, per lb (13 ft per lb)
List $9.00
2” x .022” Copper Strap, per lb (6 ft per lb)
List $10.00
4” x .025” Copper Ground Strap per lb (2.5
ft./lb)
List $12.00
3” x .032 Copper Ground Strap per lb (2.5 ft./lb.)
List $12.00
Tower Lighting
PowerClamp Transient Voltage Surge Suppressors
(TVSS) by Sine Control International (distributed
by Henry Engineering) provide the ultimate
protection against massive high energy surges,
spikes, noise and distortion on the AC powerline.
These PowerClamp TVSS units are designed
specifically for broadcast applications. They
are ideal for installation at transmitter sites
where massive power surges and lightninginduced transients are a major cause of
transmitter unreliability and damage. PowerClamp units will drastically reduce tripped
breakers, transmitter shutdowns, and prevent or minimize damage to transmitting
equipment caused by such power surges.
HP102
HP401
HP402
The TWR lighting division of o2wireless Solutions offers a
full range of ETL-certified and FAA-approved obstruction
lighting systems for any height or voltage requirement.
Whether you need lamps, parts or systems, call us
with you lighting needs. BSW stocks many popular
incandescent replacement bulbs.
TWR
OLB116
BB620
PF-250
FS15530RF
List $735.00
List $964.00
List $1,195.00
PowerClamp Transient Voltage
Surge Suppression
Ground Strap
Kintronic
34201000
Tower LIghting 2 Wire Choke
Tower LIghting 3 Wire Choke
Tower LIghting 4 Wire Choke
HP601
HP602
Obstruction Lamp, 116 Watt, 120V, 116A21TS
620 watt/120 volt Beacon Bulb (620PS40P)
Flasher, Solid State
Flasher, Solid State, for Hot Towers
HP801
HP802
List $6.00
List $47.95
List $118.00
List $185.00
HP803
20,000 amp rating, 120/240 volt 1ø
60,000 amp rating, 120/240 volt 1ø
6 0,000 amp rating, 120/240 volt 1ø
with additional neutral to ground mode
100,000 amp rating, 120/240 volt 1ø
1 00,000 amp rating, 120/240 volt 1ø
with additional neutral to ground mode
150,000 amp rating, 120/240 volt 1ø
1 50,000 amp rating, 120/240 volt 1ø
with additional neutral to ground mode
150,000 amp rating, 120/208 volt 3ø WYE
List $425.00
List $1,506.25
List $1,781.25
List $2,237.50
List $2,475.00
List $2,625.00
List $2,856.25
List $3,168.75
Call BSW For Lowest Price: 800-426-8434
Remote Site Control
RFC1RAK
Audemat Relio Remote Site Control
The Audemat Relio system is a standalone or network
solution offering the ultimate in remote site monitoring
and control applications. Packaged in a rugged 1RU
enclosure, it provides 64 digital inputs, 64 digital
outputs and 24 analog inputs along with 9 serial
ports (RS232, RS422 and RS485), 2 Ethernet ports, 4
USB ports and 1 phone line connector. IP enabled to
deliver remote monitoring from virtually anywhere, it
also features a complete voice modem interface with
DTMF capabilities for traditional remote notification
and control. Its Audemat ScriptEasy software lets
you drag and drop I/O data and logic functions to
generate monitoring and control scripts. The intuitive
GUI interface, consisting of the Creator and the Viewer
modules, supports easy development and allows real
time status display and management.
Features:
• Linux-based OS on CF card
• HDD for logs
• Dual 10/100BaseT Ethernet; 4 RS-232/422/485,
1 RS-232; 4 USB 2.0 Ports
• Voice Modem with DTMF; separate I/O termination
panels
RELIO
List $4,495.00
Call BSW For Lowest Price: 800-426-8434
Sine Systems
Remote Site
Control
The RFC1B transmitter
remote control system is an affordable, fullfeatured system and it has a well deserved reputation for being
reliable. The minimum system consists of the RFC1B control unit and one RP8 Relay
Panel (ordered separately). The RFC1B is the “brain” of the system and the RP8 is the interface to
outboard equipment. The RP8 provides eight channels of telemetry input and control output. Dial-up capabilities
allow for readings and adjustments from any touch-tone telephone. The RFC1B responds with readings or other
status information in a human-sounding voice. Each channel has two output relays for raise/lower operations and
can be programmed with a decimal point and a unit word for the telemetry reading.
Automated Operations allow the RFC1B to perform tasks automatically (such as pattern changes) based on the date
and/or the time of day. Up to 80 timed events can be programmed. The monitoring/alarm system of the RFC1B is
programmable. Up to eight telemetry channels can be monitored for out-of-tolerance conditions. The RFC1B can
react by trying to solve the problem or by calling station personnel.
The DAI-2 allows remote broadcasts at unattended stations. The DAI-2 combines a telephone autocoupler, a DTMF
tone operated controller, audio switching, alarm sensing and output relays. The relay panel includes one DPDT
and seven SPDT relays. The AFS-3 audio failsafe is typically used to trigger an alarm on a remote control system or
terminate transmission if program audio fails.
RFC1B
RAK1
RFC1RAK
RP8
DAI-2
AFS3
SP8
TS1-PS
Dial-up remote site controller
Rack adapter with modem for RFC1B
Remote control package (RFC1B & RAK1)
Relay panel
Dial-up audio interface
Audio failsafe
Surge protector
Temperature sensor
List$1,225.00
List $750.00
List$1,975.00
List $450.00
List $950.00
List $350.00
List $150.00
List $40.00
Call BSW For Lowest Price: 800-426-8434
Call BSW today if you don't see what you're looking for.
This is just a small sampling of the RF transmission gear we carry.
RF EQUIPMENT – REMOTE SITE CONTROL
71
order/info: 1·800·426·8434 • www.bswusa.com
Single and Multiple Transmitter Site Controls from Burk
Burk GSC3000 Transmitter Remote Control
Burk ARC-16 Remote Site Control
Now, you have a choice: full-time studio control and monitoring, or optional dial-up
telephone control. Because of its modular design, the Burk ARC-16 offers all the
features you need in a 16-channel remote control system. With the studio controller,
you have a constant link to your transmitter, for instantaneous response. The LCD
display shows out-of-tolerance conditions at a glance, and makes it easy to make
adjustments. The ARC-16 offers control and metering of studio equipment, including
program automation, EAS, security, status control and alarm functions at both the
studio and transmitter site. The two-unit-system has 16 channels of analog metering,
16 status channels and 32 control outputs. Features: built-in subcarrier generators,
alarms and multiple site control. Options: Enhanced Speech Interface (#ESI).
The ARC16SA is a transmitter-site, stand-alone unit. It includes the Enhanced Speech
Interface so you can take control using any phone.
ARC16
ARC16SA
2-unit remote control system
List$4,595.00
Single-unit remote control system with ESI List$3,495.00
Accessories for Burk ARC16 and ARC16SA
Establish an RS-232 connection between a computer and the Burk ARC16
with the CI. Requires AutoPilot2 software (described below). The CI is not required
where ESI is installed (described below).
CI
RS-232 computer interface for ARC16 (not for ESI)
List $250.00
The IP8 provides momentary relay closures for all raise and lower outputs
plus fail-safe. Wiring to barrier strips.
IP8
8-channel interface panel (2 required)
List $545.00
The ESI Enhanced Speech Interface lets you take control of the Burk ARC16 from
anywhere by phone, and receive alarm calls at up to 9 numbers.
ESI-B
Enhanced Speech Interface for telephone control
List $995.00
A selection of 2-wire and universal modems allow communication over
various types of communication lines.
RMS
RMT
Universal modem for studio unit / non-2-wire
Universal modem for transmitter unit / non-2-wire
List $225.00
List $225.00
The SSI/SP-16 provide an external output tally for all sixteen ARC16 status signals.
The status signals are brought to the studio rear panel as high-current open collector
outputs.
SSI
SP-16
Studio status indicator
Rackmount status panel, includes SSI and cable
List $250.00
List $395.00
Burk AutoPilot3 allows advanced control and automation. Connect a PC to any
number of ARC-16 systems, control from home, and much more.
AP3FULL
Transmitter remote control software
The modular approach of the GSC3000 transmitter remote control by Burk allows you
to remotely monitor and control a single site with minimal requirements or a large
number of sites with extensive requirements. Event-driven and time-based automatic
command capabilities allow you to trust your facilities to the GSC3000 24 hours a
day. Powerful macros enable the GSC3000 to assess situations and take intelligent
corrective action. The I/O 8 (#900085101) offers 8 channels each of metering, status and
command. The I/O 16 unit (#910085100) provides 16 channels. Up to 16 I/O units can be
networked together per site providing you with up to 256 channels each of metering,
status and command. Only one phone line is necessary for complete remote access to
all networked I/O units. The I/O unit is a stand-alone device; no separate PC is required.
Packet protocol is used for secure transactions both locally and remotely. Windowsbased software allows you to custom configure the GSC3000. An optional web interface
allows access and control from any browser.
The G-Link G-Bus Expansion Series makes it easy to monitor a wider range of site
equipment with the GSC3000, turning transmitter remote control into total site
management. By utilizing the modular design of the GSC3000, G-Link products provide
a direct link between the transmitter remote control and the monitored site equipment.
Each of the G-Link products connects to the GSC3000 using the G-Bus and can be
installed up to 1000 feet away. The OneConnect interface (#910085151) provides
a direct link between transmitters and other plant equipment and the GSC3000
transmitter remote control system. OneConnect eliminates the hardware needed for
traditional wiring interfaces, and saves time spent wiring and documenting discrete
remote control channels. Control your OneConnect as you would an I/O using Lynx,
Web Interface, or Voice Interface. The AC-8 and AC-4 Remote Outlet Controllers provide
broadcasters with discrete control of 120V AC circuits. The AC-8 and AC-4 make it easy
to power on and power off equipment at a remote location. Users can control power to
PCs, servers and other IT infrastructure. Call for details on other G-Link products listed.
910085101 GSC3000 I/O 8
List $2,935.00
910085100 GSC3000 I/O 16
List $3,460.00
910085140 Web interface
List $1,495.00
910-085-114 AC-8, 8-outlet remote power strip controller
List $895.00
910-085-113 AC-4, 4-outlet remote power strip controller
List $495.00
910-085-115 GT-4, 4-probe remote temperature monitor w/ BTO sensor List $495.00
Call BSW For Lowest Price: 800-426-8434
Accessories for Burk GSC3000
Control your VRC2500 via voice; install command
relays; and more. Call for more information.
910085130
910085120
910085110
MODEMEXT4WIRE
MODEMEXT56K
Voice interface (GSC3000 only)
Command relay (1 per 8 channels)
Wiring interface unit
External modem - full time connect
External dialup modem
List $1,295.00
List $495.00
List $250.00
List $549.00
List $225.00
Call BSW For Lowest Price: 800-426-8434
List $1,195.00
Call BSW For Lowest Price: 800-426-8434
Audemat RC-Silver Remote Site Control
Accessories for All Burk Systems
BTU4
BTI
BT-O
BTS
LVS
TS1BURK
TLM
910074001
910093001
4-input temp monitor w/ one BT-O sensor
Indoor sensor for BTU4
Outdoor sensor for BTU4
Stack sensor for BTU4 Line voltage sensor - linear analog output
Dial line transient suppressor Tower light monitor - 1 to 4 lamps, beacons, etc. Silence sensor - issues command/relay closure AC current sensor/measurement List$319.00
List $99.00
List $69.00
List $89.00
List$229.00
List$250.00
List$195.00
List$795.00
List$229.00
Call BSW For Lowest Price: 800-426-8434
72
RF EQUIPMENT – REMOTE SITE CONTROL
The Silver Remote Control lets you remotely monitor and control a single site via TCP/
IP, offering 16 channels for status, and 8 channels each of metering and commands. A
stand-alone unit with Linux as an operating system, it is equipped with an embedded
web server and an Ethernet port for communication over LAN/WAN/ Internet. The
unit can also be connected to a phone line using an external modem for dial-up
connection (it supports the PPP protocol). 4 USB ports are available for the connection
of external devices such as a web cam. The Silver Remote Control can send emails to
notify personnel about out of tolerance conditions and to give alarms. As on option, a
VOICE/DTMF interface is also available (call for price).
The RC-Silver also includes the powerful and innovative Scripteasy software enabling
you to graphically configure I/O, time-based automatic actions and macro so that the
unit can take automatic corrective actions.
RC-SILVER
List $2,250.00
Call BSW For Lowest Price: 800-426-8434
order/info: 1·800·426·8434 • www.bswusa.com
Control All Your Transmitters from Just
About Anywhere!! Trust the Burk ARC Plus.
Burk ARC Plus Remote Site Control
The award-winning ARC Plus is the next-generation transmitter remote control system
for full-time, multi-site or dial-up operation, with the ability to connect an unlimited
number of sites, each with up to 256 channels of metering, status and command. You
can access the entire system from the front panel, take control using a Web-browser or
PC software, or dial in to your system over the phone.
Its front-panel interface features a large display with bright, easy-to-read metering values
and gives you rapid site and channel navigation. It offers unrivalled power and flexibility
to unattended station operation. Routines are stored onboard, so a dedicated computer
at the transmitter site is not needed. It can read and automatically adjust conditions at
multiple sites, giving you greater control over backup and auxiliary operations. It also
gives you total control over how alarm conditions are communicated. For tight spaces,
the ARC Plus SL is a compact, 1RU version.
ARCPLUS
ARCPLUSSA
ARCPLUSSL
Main unit List $2,995.00
Main unit with built-in enhanced speech interface
(note: works as a stand-alone system at the site) List $3,990.00
1RU Slimline model
List $2,495.00
Features:
• TCP/IP-based platform; built-in web Interface
• Scales to more than 1,000 sites
• Advanced front-panel control
• Onboard automatic routines
• Email alerts for alarm conditions; selective alarm notifications
• Backwards compatible with the ARC-16
ACCESSORIES:
PLUSXIIU
PLUSXICRU
ESIPLUS
AUTOPILOTPLUS
PLUSX300
List List List List List $995.00
$995.00
$995.00
$495.00
$695.00
Call BSW For Lowest Price: 800-426-8434
Burk Flame and Spark Detector
The AFD-1 interfaces with a remote facility management
system, such as the Burk Technology ARC Plus, ARC-16,
GSC3000 or VRC2500, to notify personnel of electrical arcs
and flame. Applications include transmitter enclosures,
antenna tuning units, transfer switches, etc. The unit will
reliably detect a pilot light, flame or arc from fifteen feet.
Burk Plus Connect
Direct Link to
Transmitters
AFD-1
List $459.00
Call BSW For Lowest Price: 800-426-8434
The PlusConnect provides a
seamless link between the ARC
Plus and popular transmitters,
allowing broadcasters to manage
an entire transmission plant,
studio, and IT infrastructure on a
single platform. Its single serial
connection to the transmitter
reduces installation time and
saves the expense of adding
remote control capacity.
PLUSCONNECT-HZ
For Harris transmitters
PLUSCONNECTNAUTELV For Nautel V-Series transmitters
Integrated, IP-based input unit
Integrated, IP-based command relay unit
Enhanced speech interface
AutoPilot software for PC
I/O interface
Burk Plus-X AC-8 Remote Power Controller
List $1,195.00
List $1,195.00
Call BSW For Lowest Price: 800-426-8434
Burk SL-1 ARC Plus Serial LAN Extender
Ethernet Connector
The Burk SL-1 provides an opportunity to take advantage of the ARC Plus broadcast
facility remote control system at sites without an Ethernet drop. With the ARC Plus
operating on a serial link with the SL-1, studio personnel have access to the built-in web
server of the ARC Plus and can take readings, manage alarms and issue commands. The
efficient design of the ARC Plus communication protocol ensures effective performance,
even at modem speeds.
The SL-1 allows deployment of IP-enabled technologies where traditional Ethernet
connectivity is impractical or unavailable. Unlike a serial-to-Ethernet converter, which
allows RS-232 devices to operate on an existing Ethernet link, the SL-1 enables new IP
connectivity to the remote site.
The Plus-X AC-8 provides independent management of equipment connected
to 120V outlets, allowing remote rebooting of digital gear. Broadcasters can also
remotely manage HVAC, lighting and other appliances. The product connects directly
to the Burk ARC Plus remote control via Ethernet, or to any remote control (including
the GSC3000 and ARC-16) using general-purpose inputs. A built-in Web server allows
stand-alone remote connectivity.
PLUSX-AC-8
List $895.00
Call BSW For Lowest Price: 800-426-8434
Operating in pairs over a full-time
bidirectional serial link, the SL-1
accommodates a wide variety of RS-232
links, including radio, leased line and dialup, with appropriate modems. To optimize
bandwidth efficiency, the SL-1 learns
the location of each network device and
transports only those packets destined
for the opposite side of the bridge. Since
the SL-1 bridges both networks onto the
same subnet, integration with the existing
IT infrastructure is easy. Find out more by
calling BSW today.
SL-1 List $395.00
Call BSW For Lowest Price: 800-426-8434
RF EQUIPMENT – REMOTE SITE CONTROL
73
order/info: 1·800·426·8434 • www.bswusa.com
Broadcast Tools Transmitter Site
Controllers with Dial-Up or Web Access
Trust Broadcast Tools for affordable, reliable solutions…and here’s another first – an
8-channel remote control unit for roughly a grand! The affordable WVRC-8 provides
a one rack-unit solution for web based and/or dial-up transmitter site control. The
WVRC-8 was designed from the user’s point of view, so all of the basic functionality
you need is included to control your site equipment. The WVRC-8 is equipped with
a browser-based event function program scheduler and alarm logger, while the user
may select from four email recipients when an out-of-tolerance alarm is generated.
The WVRC-8 is equipped with eight high-resolution analog (telemetry) channels,
while each of the eight optically isolated status channels may be configured for 5 to
24vdc wet or dry (contact closures) status monitoring. The eight control channels
are equipped with independent SPST one-amp relays for each raise/on and lower/
off function. The WVRC-8 is supplied with spoken words and phrases in English, while
the user is free to record words and phrases in their language. In addition, the WVRC-8
may be programmed for dial-up operation via HyperTerminal, while the Java applet
programming can be performed using your favorite web browser.
The WVRC-4 is a cost-effective, half-rack 4-channel version with just a few less bells
and whistles. For details go to www.bswusa.com.
WVRC8
WVRC4
List $1,099.00
List $649.00
GPI-32
Broadcast Tools GPI Series General
Purpose Interfaces with 32 or 24 Inputs
The GPI-32 interfaces 32 optically isolated inputs to a PC's RS-232 or
USB port, with serial data conforming to Broadcast Tools’ standard
GPI-24
switcher PIP format. It features dual RS-232 connectors (one for daisy-chaining multiple units on the
same legacy serial port and a DB-9 to interface to the supplied USB adapter), power and input LEDs, dual plug-in
Euroblock connectors, two independent DB-37 connectors and twin power connectors. DB-37 cables and serial
cable included. The GPI-24 interfaces 24 optically isolated inputs. You can configure each input to generate ASCII,
HEX or control character strings on each rising and/or falling input transition. You also get three additional preprogrammed selections: the "PIP" GPI format, the AT-1616 format and the short ASCII format. It comes with a Smart
USB-RS-232 adapter cable, DB-9 straight-through cable and AC power adaptor.
GPI-32 32 optically isolated inputs to serial/USB List $339.00
GPI-24 24 optically isolated inputs to serial/USB List $229.00
Broadcast Tools
Serial Remote
Controls
Broadcast Tools Voice Alarm Dialer
The SRC-2 interfaces two
optically isolated inputs and two
SPST relays to a RS-232 or USB port. It
can notify a PC software program that any
of two inputs have been opened or closed and
allows your software to control two SPST, 1-amp relays.
SRC2 List $139.00
LowestPrice
only $129!
Broadcast Tools DC8PLUS
Dial-Up DTMF Controller
DC8PLUS will answer an access code of up to 8 digits.
It will allow the control of 8 form-A relays and the
monitoring of 8 logic level status input. Each relay may
be for momentary, latching or interlocking closures.
DC8PLUS List $459.00
LowestPrice
only $379!
Broadcast Tools Smart Relay 4
This interface provides four independent 2PDT relay and
eight optically isolated 5Vdc to 24Vdc wet or dry inputs.
It converts sustained network closures to a pulse. User
programmable logic and pulse stretching may be set
from 50ms to 99 hours, 59 minutes and 59.99 seconds.
SMARTRELAY4
74
Call BSW For Lowest Price: 800-426-8434
LowestPrice
only $179!
The Broadcast
Tools VAD-2
Plus is a user
programmable
two-input
multi-number
voice/pager auto dialer with integrated stereo silence
sensor, temperature sensor and power failure port
designed for dial out paging and/or voice message
notification. The VAD-2 Plus is equipped with two wet
or dry optically isolated inputs, temperature sensor
port, power failure input and stereo silence sensor,
which when tripped, will sequentially dial a pager and/
or up to four different phone numbers and play back a
user recorded message corresponding to the tripped
input. The VAD-2 Plus is also provided with two SPDT
one amp relays for the control of external equipment.
VAD-2PLUS
LowestPrice
List $329.00
only $28495!
Broadcast
Tools DTMF
Encoder/
Decoders
The Broadcast Tools
DTD-16 is an affordable DTMF tone/sequence decoder
that is programmable to decode up to four sequences
or a single tone and assign it to any one of four relays,
twelve open collectors and/or the RS-232 port. The
DTE-16 is an encoder.
DTD16
List $199.00 $16900
DTE16
List $199.00 $16900
LowestPrice
only $169 each!
RF EQUIPMENT – REMOTE SITE CONTROL
Call BSW For Lowest Price: 800-426-8434
Broadcast Tools SRC-16
16-Input Serial Remote
Control Computer Interface
The Broadcast Tools SRC-16 is a computer interface to
the real world. Connection through an RS-232, RS-422
or RS-485 serial port with baud rates up to 38400 the
SRC-16 can notify your PC software program that any of
16 optically isolated inputs has been opened or closed
and allows your software to control sixteen SPDT, 1-amp
relays. The user is supplied with three pre-programmed
format selections. The "PIP" GPI format, the AT-1616
format and the short ASCII format, which is used by a
number of radio automation suppliers. The SRC-16 is
supplied with LED indicators to display input and relay
status. Half-rack chassis. Optional RA-1 rack shelf.
SRC16 List $419.00
LowestPrice
only $37199!
Accessories:
RA-1
Rackmount shelf
4900
$
Broadcast
Tools Site
Sentinel 4
Remote Site Monitor
The Site Sentinel 4 (for use with the Internet) provides
an Ethernet port, 4 channels of metering inputs,
optically-isolated status (contact closures or external
voltages) inputs, normally open dry contact relays,
power failure input and a stereo silence sensor
input. The Site Sentinel 16 gives you 16 channels of
metering inputs.
$
SITESENTINEL4 List $399.00
34900
$
SITESENTINEL16 List $1,099.00
97900
LowestPrice
from $349!
Broadcast Tools
ESS-1 Serial-toEthernet Interface
The ESS-1 is ideal for
applications requiring data support for both RS-232
and RS-422 communications. The ESS-1 provides
Ethernet connectivity to any device with a serial port,
and is ideal for serial tunneling or applications where
a COM port, TCP Socket, UDP Socket, or UDP Multicast
functionality is needed.
ESS-1 List $169.00
LowestPrice
only $149!
INNOVATIVE PROBLEM SOLVING TOOLS FOR BROADCAST
Site Control
WVRC-8
WEB and Voice Dial-up Remote Control
The WVRC-8 provides a cost-effective, one rack-unit solution for web based status, silence sensor, temperature sensor and power failure input can be
and/or recordable voice response dial-up transmitter site control. Each analog, configured to dial-out and/or email up to four individual email addresses.
NEW!
Site Sentinel™ 16
Web-based 16 channel Site Remote Control System.
WVRC-4
WEB and Voice Dial-up Remote Control
The WVRC-4 provides a cost-effective, half-rack solution for web based and/or
recordable voice response dial-up transmitter site control.
NEW!
I/O Sentinel™ 4
Web-enabled four logic/status input,
four relay output module
Web-based Three-relay Module
Schedule Sentinel™
Web-based Event Scheduler
Status Sentinel™ 16
Web-based Four channel Site Remote Control System.
NEW!
NEW!
Relay Sentinel™
Site Sentinel™ 4
VAD-2 Plus
Voice Alarm Dialer
AUDIO Sentinel™
The tinyTOOLS VAD-2 Plus is a
user programmable dual status
input multi-number voice/pager
auto dialer with integrated stereo
silence sensor, temperature
sensor and power failure port
designed for dial out paging and/or
voice message notification.
The Audio Sentinel™ is a web
based dual channel stereo
silence monitor combined with
a transparent, integrated audio
switcher. Designed to monitor
two balanced or unbalanced
independent stereo analog
audio sources.
Status Sentinel™
Web-enabled Three-input Status/Logic
Module
Relay Sentinel™ 16
Web-enabled sixteen open collector/SS
Web-enabled 16-input status/logic module relay module
USA Proud
www.broadcasttools.com
order/info: 1·800·426·8434 • www.bswusa.com
Agile
Marti
RPU
SRPT40A
(pardon the pun)
Jump2Go RadioTag Plus Radio Tagging System
Marti SRPT- 40A
RPU
Marti’s SRPT-40A RPU
SR40
transmitter is easy to operate thanks
to its frequency-agile design. Now you can dial the exact frequency in from the front
panel from 430 MHz through 480 MHz in 12.5 kHz steps. The SRPT-40A features 40
watts RF output, 4 XLR mic inputs with one channel selectable line level, front-panel
metering, high-temperature protection, and “auto recover” if the power should fail.
Power via AC or DC to 30 volts.
The SR-40A is the companion receiver to the SRPT40A frequency-agile RPU
transmitter. It provides a front-panel frequency select switch, selectable metering
and a headphone jack. For more info see www.bswusa.com.
SRPT40A
SR40A
Transmitter Receiver
Your Brand New
Revenue Stream!
List $2,795.00
List $2,500.00
Call BSW For Lowest Price: 800-426-8434
SRPT30
Jump2Go RadioTag Plus is a GREAT new way of
interacting with your radio audience via iTunes
Tagging, an innovative way for listeners to engage
with your station’s radio programming. With Apple
iTunes® Tagging-capable radio receivers such as
the new iPod Nano, listeners simply press a button to save information about the
songs they hear and like – no pen or paper required. The iPod Nano stores the song
information and when the iPod syncs to a computer, iTunes builds a tagged playlist
so listeners can preview, buy, and download those songs.
The Jump2Go system consists of the JumpGate, a black box that fits in the palm
of your hand. It comes with a serial port and Ethernet connection. The software
(firmware) it runs is the most diverse and advanced RDS application ever written.
The JumpGate talks to automation systems, iTunes, Jump2Go's data center,
processes RDS song tagging, tags commercials, generates RT+, and interfaces
with Ando Ad-insertion and streaming audio encoders. It’s a system that is easy to
install, (no Windows software, no discs, no Windows PC necessary), and super easy
to configure and maintain via a web browser. So say goodbye to .ini files, emailing
config files to vendors, and standing in a noisy rack room for hours on end.
Earn commissions on songs sold – each song that your station refers to an iTunes
Tagged playlist qualifies for a commission, paid to you if the customer purchases
that song.
Jump2Go is a service which, once set up, is almost completely transparent to your
day to day activities. In all probability, the most labor you’re going to be putting into
it is cashing your checks!
Contact BSW today to learn how Jump2Go can make a difference in your revenue
stream!
Jump2Go’s Sequence of Events:
1. On air Event Occurs
2. JumpGate sends "raw" data back to data center
3. Data center identifies content and collects rich data
4. JumpGate outputs rich data to RDS, web, streaming encoder
Marti SRPT-30 RPU
SR30
The Marti SRPT-30 incorporates the proven synthesizer and RF amplifier designs
from the SRPT-40A (above), but this unit is limited to two frequencies. The selected
frequencies can be changed at the factory. Features: output power is adjustable to
30 watts output; built-in compressor/limiter; four balanced XLR mic inputs with gain
controls (one switchable to line level).
The two-channel, frequency-synthesized SR-30 receiver has superior selectivity that will
help you maneuver through the high interference levels that plague today’s RPU bands.
It is designed as the companion for the SRPT-30 RPU transmitter.
SRPT30 Transmitter
SR30
Receiver
List $1,935.00
List $1,935.00
Jump2Go Data Center
InternetApplications
& Partners
Purchase URL’s
3
Station Event ID’s
Station Data/Images
Application
Layer
Call BSW For Lowest Price: 800-426-8434
Misc Data Sources
Will-Burt Hurry-Up
Telescope Mast
The Will-Burt Hurry-Up mast is designed for
fast deployment of lightweight antennas. It
consists of six graduated aluminum tubes
which nest one inside another (6 ft. nested,
20 lbs.). It can be fully extended to 25 ft.
in one minute. Includes universal vehicle
mounting stand.
Station
EPG Data
2
1
4
HURRYUP List $1,820.00
Call BSW For Lowest Price: 800-426-8434
Automation System
Streaming Encoder
RDS Encoder
Contact BSW For More Information
76
RF EQUIPMENT – REMOTE CONTROL AND RPU EQUIPMENT
order/info: 1·800·426·8434 • www.bswusa.com
Broadcast Tools
Audio Sentinel
Silence Monitor
This web based dual channel
stereo silence monitor monitors
two independent stereo analog audio sources and
switches to a back-up analog audio source when
silence is detected. The Audio Sentinel can be
controlled and/or visually monitored over the Internet
using a web browser. Email alarms may be generated.
AUDIOSENTINEL
LowestPrice
List $459.00
only $249!
Broadcast Tools
DB15 and DB37
Connectors
from $2499!
Broadcast Tools
Schedule
Sentinel
Features:
• Permits the insertion of the following parameters: PI, PS, TP, TA, MS, PTY, DI, AF, RT
• Integrates latest Audemat developments such as Scrolling PS and labeling command interpreter available for
an easy connection with automation software
• Delivered with amazing PC software to configure the equipment
• Includes all accessories required (even a serial cable RS232-USB to connect the encoder to the PC)
• User-friendly GUI for non technical people with wizard configuration
• Plug and play with easy set-up
List $1,470.00
SCHEDULESENTINEL List $319.00
Audemat FMB80
RDS Encoder
The Audemat FMB80 RDS/RBDS
encoder is designed to bring
convenience and ease-of-use to RDS datacasting. Besides covering all RDS/RBDS parameters, the system provides
extensive user features to give broadcasters the advantages of remote access, intuitive Web-based setup, and TCP/
IP capability. Since all of the setup fields are accessible from anywhere via TCP/IP, you can modify your configuration,
change RDS text, switch from static to scrolling RDS, or control any other parameter from virtually anywhere. The
text can be customized and configured through a new HTML web page in the FMB80. e.g: “Now playing” title “by”
artist name “with name of the station”. Also, an embedded scheduler has been designed to display messages based
on time and date. Other features: stand-alone operation – no need for a dedicated PC; communication ports: (2) RS232 ports (DB9); (1) RS-232/RS-485 port (DB9); (1) 10-BaseT Ethernet port (RJ-45).
FMB80
List $2,990.00
Call BSW For Lowest Price: 800-426-8434
Inovonics 702 RDS/RBDS Encoder
only $279!
70200
List $520.00
Audemat RDS Silver
RDS Encoder
The compact RDS Silver encoder is ready for duty.
Loaded with all the main functions broadcasters need,
but priced to barely dent any budget, it’s easy to install
and even easier to use.
Features:
• Permits the insertion of the following parameters:
PI, PS, TP, TA, MS, PTY, DI, AF, RT
• Integrates latest Audemat developments such as
Scrolling PS and labeling command interpreter
• Easy connection with automation software
• Includes all accessories (even a serial cable RS232USB to connect the encoder to the PC)
• User-friendly GUI for non-technical people with
wizard configuration
List $915.00
Call BSW For Lowest Price: 800-426-8434
Call BSW For Lowest Price: 800-426-8434
Inovonics 713
RDS/RBDS Encoder
Inovonics raises the stakes with the new Model 713 RDS/RBDS encoder, which incorporates all the features of its widely
hailed 712 while adding on-the-fly programming access via a local network (or even the internet!) with its built-in TCP/
IP interface. This connectivity permits full integration of RDS/RBDS transmissions with your station’s other networked
functions, including message streams for digital radio and webcasting. Front-panel USB makes programming of all
static RDS/RBDS information almost as easy as turning on the lights. It connects to station automation with RS-232
serial interface or via LAN/Internet and sends dynamic messaging in “block” or safe scrolling” modes.
71300 List $1,900.00
RDSSILVER
Call BSW For Lowest Price: 800-426-8434
The 702 “Mini Encoder” gives you a basic RDS presence for a minimum investment.
Put your station’s call or street name on the radio faceplate, send all the important
system IDs, and use 64 characters of RadioText for station and program info. The
702 features a Windows interface and easy USB connectivity.
The new Schedule Sentinel
is a web-enabled event scheduler
that can store and control up to
100 unique events using any available
NTP timeserver as a time base. It is equipped
with two independent serial ports.
LowestPrice
The FMB10 is an affordable dynamic RDS encoder that creates a RDS sub-carrier and
permits the display of song and artist information on radio receivers.
FMB10
The Connect O' Adapter
15 MAX (COA-15MAX)
plugs into the male 15-pin
D-Sub connector on the
WW1 IDC "MAX" or StarGuide II/III receivers, converting
the DB-15 connector to the euroblock removable screw
terminals. The Connect O' Adapter 37 XDS (COA-37XDS)
effectively converts the male DB-37 connector to the
removable screw terminals on StarGuide II/III or ABC/CC
XDS receivers. The COA-9 XDS/MAX plugs into the male
9-pin D-Sub connector on the ABC/XDS, WW1 IDC "MAX"
or StarGuide II / III.
COA15MAX
List $29.00 $2499
COA37XDS
List $59.00 $5199
COA9XDSMAX List $25.00 $2300
LowestPrice
Audemat FMB10
RDS Encoder
Call BSW For Lowest Price: 800-426-8434
Inovonics 720
RDS/RBDS Encoder
This RDS/RBDS encoder offers
multiple message-scrolling modes and easy, self-guided connection to station automation.
Its dynamic RadioData encoder automatically parses and scrolls song title and any other information.
Its front-panel LCD displays setup parameters without the need for an on-site computer, and also shows incoming
raw data from station automation as well as exactly what the listener sees on his radio. Features: intuitive software
and built-in diagnostics for easy installation; interfaces with popular automation systems; accepts a serial connection
for automation data and features a front-panel USB port for convenient local setup; a unique 'no-header mode'
allows use with unformatted, satellite-streamed song title information; works with any FM exciter and generator.
720-00
List $1,785.00
Call BSW For Lowest Price: 800-426-8434
Inovonics 510
RDS/RBDS Decoder
The 510 connects to the composite/MPX output of any FM receiver or modulation monitor to display all the RDS/
RBDS radio-data groups. LCD readout displays station, format and program IDs, alternative frequencies, text and
in-house messages, traffic and emergency alerts, plus the subcarrier injection level in percent-modulation. A rearpanel RS-232 port allows further analysis, or archiving of received data.
51000
List $1,700.00
Call BSW
For Lowest Price: 800-426-8434
RF EQUIPMENT – SATELLITE CONTROL AND RDS ENCODERS
77
order/info: 1·800·426·8434 • www.bswusa.com
Audemat Navigator 100 FM Signal Monitor
Burk PPM Assurance Monitor and Controller
The Navigator 100 is a compact and affordable mobile FM
receiver with built-in GPS and delivered with a flashcard. It’s the
perfect tool for field tests, coverage, and modulation analysis.
It combines in the same chassis an RF, modulation, pilot, RDS
and DARC monitor. A must-have for all engineers, it comes with
a .dll for Microsoft Mappoint, a calibrated whip antenna, and a
power supply. It comes complete with FM Explorer control and
analysis software, providing graphic data interpretation with
many parameters available in multiple views. Featuring complete
FM multiplex power, deviation analysis, and interpretation of RDS
and DARC signals, it can be connected directly to a Navigator
via RS232, or used with multiple systems over TCP/IP through an
Audemat IP2 port, antenna or MPX input / MPX output.
It takes hard work to maintain a large and loyal listener base. And it’s
important that this audience is measured accurately so that your station
receives full ratings credit. Burk’s PPM Assurance products protect
Arbitron PPM ratings and dramatically reduces overhead by constantly
monitoring all PPM encoders and providing automatic encoder toggling.
Email alerts and exception reporting keep you up-to-date.
More than an encoding monitoring system, PPM Assurance is an
automatic recovery solution comprised of the PPM Monitor and PPM
Controller. In addition to providing reliable backup encoder activation,
the PPM Monitor establishes direct data connectivity to the Arbitron
equipment to verify code accuracy.
While the monitor/controller combination is the best protection for
key revenue stations, some broadcasters may choose to manually
switch encoders on certain stations. In this case, the PPM Monitor works
independently to provide immediate email notification and logging of
encoding error.
The PPM Monitor is a 4-station monitor for email alerts, logging and
optional automatic recovery in case of encoding failure or program
silence. 1 PPM Monitor connects to up to 4 Arbitron encoding monitors.
It provides a LAN/WAN connection to the PPM Controller.
The PPM Controller is a 2-station PPM encoder controller. It works with
PPM Monitor for automatic recovery in case of encoding failure. Order 1
for every 2 pairs of PPM encoders. LAN/WAN connection.
NAVIGATOR100
List $6,665.00
Audemat Navigator HD
FM and HD Signal Monitor
The Navigator HD FM is a frequency-agile monitor for easy
field surveys as well as on-site/studio monitoring of a station’s
complete FM and HD signal. It features an external GPS receiver,
RS-232 control, and is PC programmable. See it online at www.
bswusa.com.
NAVIGATORHDFM
List $13,050.00
Call BSW For Lowest Price: 800-426-8434
PPMMONITOR
PPMCONTROL
FM Mod-Monitor Model 531
The 531 displays FM total-mod and demodulated audio
levels, pilot and subcarrier injection and incidental AM noise.
Alarms warn of overdeviation, excessive multipath, carrier
loss and audio loss. The 531 is Inovonics’ second-generation
FM monitor and continues to be the inspiration for
competitive products. (Ours is the best, you understand!)
Our AM and FM mod-monitors are dependable,
time-proven industry workhorses in everyday
station operation and are very easy to use.
Both include preselectors to give reliable off-air
(or direct-connect) readings. Front-panel presets
let you quickly compare your station’s
parameters with those of market companions.
78
List $1,295.00
List $995.00
• Automates PPM
recovery with
clear and prompt
indication of
failure source.
• Monitors Arbitron
encoders, Arbitron
monitors, and
station’s off-air
audio to protect
against loss of audio
and encoding of
incorrect codes
• Built-in web server
makes setup and
monitoring easy
• Email notifications
assure clear,
consistent
communication
Call BSW For Lowest Price: 800-426-8434
Model 525 AM Mod-Monitor
The 525 has a unique detector to give precise wideband
AM readings, even in the presence of IBOC digital carriers.
Positive and negative peaks are shown simultaneously
alongside two sets of peak flashers, with alarms for overmod,
carrier loss and audio loss. Menu selections can display signal
level and asynchronous noise, and also program the audiomonitor output to simulate consumer radios. Supplied with
a weatherproof loop antenna.
Download complete specifications
at www.inovon.com
order/info: 1·800·426·8434 • www.bswusa.com
Model 703
Mini-Encoder
The 703 is the first in our INOmini series. It displays simple
scrolling messages on listeners’ radios for station ID,
program promos and advertising, and provides all the usual
RadioData housekeeping functions too. Easy USB
programming and quick installation!
Model 730
Our ‘Flagship’ Encoder
BEST!
Our ‘does it all’ 730 has USB, serial and network connectivity.
It accepts both ASCII and UECP command sets, and supports
revenue-generating ‘song tagging’ and other advanced RT+
applications. TCP/IP and UDP ports feature a built-in dynamicDNS client service, and an on-board scheduler holds static
messages that may be programmed weeks in advance.
Brand Your Station Today!
TM
Model 720
Dynamic Encoder
Connects with nearly any playout system to scroll song info,
station promos and advertiser tie-ins. Serial connection to automation and a front-panel USB port for quick setup. A unique
no-headers mode scrolls song info from raw satellite feeds.
Fully Loaded
Dynamic RDS
Encoder
Download complete specifications
at www.inovon.com
Inovonics 531:
Undisputed Value Leader
in an FM Mod-Monitor
BRAND NEW!!
Get it First at BSW!
•
•
•
•
SB, Serial and IP-Network connectivity
U
Connects with virtually any playout system
Supports RT+ and UECP
Conforms to NRSC and CENELEC Standards
Inovonics 730 RDS/RBDS Encoder
The Model 730 features a front-panel LCD screen and jog wheel for convenient on-site
setup without the need for a computer, and includes Windows software for fast and
intuitive programming through any of the encoder’s data ports. It displays incoming
data from automation on the fly and shows outgoing scrolling messages exactly as
listeners see them. The 730 connects with virtually any playout system, sending song
title and artist information to listeners’ radios, with full support for RT+ tagging and
other advanced applications. Interface with station automation is either an RS-232
serial link or an IP network (LAN or Internet) connection. An Internet connection
assures accurate Clock Time and Date (CT) timekeeping, and optional changeover
to Daylight Saving time is automatic. Internal data diagnostics and transmission
safeguards guarantee foolproof installation and operation, and field-upgradeable
firmware ensures compatibility with any forthcoming RDS/RBDS applications.
*730-00REV2!
List $2,200.00
Call BSW For Lowest Price: 800-426-8434
53100
Inovonics 531 FM Modulation Monitor
and 540 FM SCA Monitor
54000
The Inovonics 531 combines a frequency-agile, wideband FM receiver with very linear
demodulation and metering circuitry for precise measurement of carrier modulation.
Synthesized, push-button tuning with one-touch memory entry permits instant
comparisons between any station and its market companions. Readouts of signal
strength, multipath distortion and synchronous AM noise qualify the incoming signal
and validate the measurements. The 531 presents easy-to-read and accurate
displays of total carrier modulation and demodulated stereo audio.
A tunable monitor/demodulator for FM broadcast subcarriers (including digital),
the Inovonics 540 connects to the composite (MPX) output of any FM modulation
monitor (such as the Inovonics 531). Easily calibrated to the modulation monitor
reference, no additional test equipment is required. The 540 demodulates audio SCAs
and displays actual FM deviation of the SCA subcarrier. Options: comprehensive RDS
decoding via plug-in module and software. Call for details.
53100
54000
FM modulation monitor List $3,200.00
SCA monitor List $1,400.00
Call BSW For Lowest Price: 800-426-8434
RF EQUIPMENT – MODULATION MONITORS
79
order/info: 1·800·426·8434 • www.bswusa.com
BELAR HD Radio Modulation Monitors
Equip your station for years to come with this state-of-the-art HD radio monitor.
The FMHD-1 will effortlessly decode HD radio signals and analog FM signals
simultaneously, displaying HD radio status, data, time alignment, and configuration
information, as well as audio metering and RF and audio spectrums.
The FMHD-1 will monitor multiple audio streams, and its 8 user assignable analog
audio outputs and 3 assignable optical AES/EBU outputs provide support for a wide
variety of broadcast scenarios.
Features
• 640x240 color LCD display
• Frequency agile antenna and high-level inputs
• RF spectrum analysis ±600 kHz high level, ±300 kHz antenna
• Audio spectrum analysis and metering analog and HD L/R/L+R/L-R
• Analog / HD time alignment cross correlation analysis
• HD control and status information
• HD SIS and PAD data status
For AM radio, the new AMHD-1 demodulates analog and digital carriers, displays
the RF spectrum and all HD parameters. It features both analog and AES/EBU audio
outputs, and has an Ethernet interface for remote operation.
FMHD1 FM HD Radio mod monitor
AMHD1 AM HD Radio mod monitor
List $7,200.00
List $7,200.00
Audemat GoldenEagle HD Radio Monitor
The GoldenEagle HDFM is an HD and analog FM receiver (AM model also available)
designed as a powerful off-air monitoring system with remote control capabilities.
The GoldenEagle HDFM can be installed at the radio station or at the transmitter site.
The system monitors automatically, in real time, the quality and continuity of several
FM and HD programs and notifies the engineer of any problem by sending an alarm.
It offers innovative functions such as audio streaming and recording, automatic
scanning, measurement analysis and storage as well as optional spectrum analyzer
and remote control (both sold separately). Find out more. Call and ask your BSW sales
representative today for the right system for your station.
Call BSW For Lowest Price: 800-426-8434
Belar Modulation Monitors
The Belar FMM-2 FM modulation monitor is a wideband, FM monitor, designed to
measure the total modulation characteristics of monaural as well as multiplexed
FM transmitters. The FMM-2 is also used as a low distortion and low-noise FM
demodulator to drive the companion stereo and SCA monitors, as well as providing
audio outputs for aural monitoring and proof-of-performance measurements. The
ultra-linear digital discriminator produces an almost distortionless and flat baseband
signal to ensure precise stereo and SCA decoding. Features: digitally selectable peak
indicator, adjustable in 1% increments from 1 to 199%, independent of modulation
polarity; voltmeter for AM and FM noise measurements; carrier alarm with front-panel
indicator; two wide-band outputs; true peak or semi-peak metering.
The FMS2 Stereo Modulation Monitor operates in conjunction with the FMM-2
baseband modulation monitor. The test and measurement capability of the FMS2 is
enhanced by the integration of two independent auto-ranging voltmeters allowing
automatic measurement of channel separation and crosstalk, along with sub-carrier
suppression and noise. Features: two independent semi-peak modulation meters for
simultaneous monitoring of left and right channels; switchable de-emphasis for noise
measurements; pilot alarm with front panel indicator; outputs for audio proof-ofperformance measurements; two auto-ranging voltmeters with LED displays for 0 to
-80 dB range; stereo separation measurement capability of over 70 dB at 15 kHz.
The AMM2C modulation monitor is an all solid-state AM demodulator to measure the
modulation characteristics of AM broadcast transmitters over 260 kHz to 50 MHz. The
AMM2C utilizes a unique carrier-referencing system for the peak flasher indications.
FMM2
FMS2
FMM4A
RFA4
AMM2C
AMM3A
AMM4
RFA2
SCMA1
FMRR4
AMDA1
LP1
LP1A
FM modulation monitor
FM stereo mod monitor FM frequency monitor FM RF amplifier
AM mod monitor
AM mod monitor
AM freq monitor
AM RF amplifier
SCA modulation analyzer
FM rebroadcast receiver
AM distribution amp shielded AM loop antenna shielded antenna w/ preamp List $1,990.00
List $2,150.00
List $1,790.00
List $1,390.00
List $1,750.00
List $1,975.00
List $1,650.00
List $890.00
List $2,750.00
List $2,090.00
List $895.00
List $390.00
List $490.00
Call BSW For Lowest Price: 800-426-8434
80
GoldenEagle HDFM with
included touchscreen
RF EQUIPMENT – MODULATION MONITORS
GOLDENEAGLEHDFM
GOLDENEAGLEHDAM
TF00153
TF00154
TF00165
FM monitor
AM monitor
Spectrum analyzer board
Remote control
Voice and DTMF interface
List $5,945.00
List $5,945.00
List $3,115.00
List $2,435.00
List $735.00
Call BSW For Lowest Price: 800-426-8434
Modulation Sciences ModMinder
FM Modulation Monitor
The ModMinder (#FMMM2) gives you more accurate measurement of modulation.
ModMinder registers only those longer events that the FCC really cares about. This
means you may be able to boost your modulation up to 3 dB depending on the type
of processing you use. Includes an internal demodulator and dialup software.
FMMM2 List $4,200.00
Call BSW For Lowest Price: 800-426-8434
BSW Offers Low
Package Pricing!
Call or Email Us with
Your Quote Today for
Discount Pricing!!
order/info: 1·800·426·8434 • www.bswusa.com
DaySequerra M3 AM, FM &
HD Radio Multicast Monitor
This compact (2RU) unit gives you the ability to
monitor and alarm three separate broadcasts.
Featuring three frequency-agile AM, FM and
HD Radio Multicast tuners, each equipped with
separate analog and digital balanced outputs,
RS232 PAD data outputs, as well as six programmable dry, floating contact alarm
relays, it delivers crystal clear audio with HD Radio stereo separation better than 90 dB.
It won’t be fooled by pink noise or tones, generating alarms only when real program
silence is detected in HD Radio or analog broadcasts. It can also trigger an alarm on
loss of RF Carrier, OFDM Lock, RBDS data stream, PAD data stream, Multicast
Available, and Delay Bit.
It also boasts unsurpassed RF sensitivity and IF rejection. Each tuner has a separate
antenna input and internal jumpers can be strapped to support a common antenna.
Dual power supplies provide total isolation between RF and audio sections.
M3
List $3,995.00
Call BSW For Lowest Price: 800-426-8434
Features
• Impressive over-sampled A/D conversion
• 3 multi-function vacuum florescent displays (VFD)
• Displays and decodes HD-1 through HD-8 PAD data and analog RBDS data;
streams Pad data via RS232
• “Split Mode” provides easy-to-use HD Radio digital-to-analog signal, time, level
and phase monitoring
• Each tuner has 20 preset stations for AM and FM bands
• Balanced analog audio outputs at +4dBV on XLR connectors
• S/PDIF digital audio output on XLR connectors, 5.1 Surround capable
• Full-time digital outputs, even when tuned to an analog station
• 6 assignable alarm relay contact closures for each tuner
Inovonics 631 FM Relay Receiver
DaySequerra AM/FM/HD Radio Precision Modulation Monitor
Check out these new-generation AM, FM and HD Radio modulation monitors! Both deliver pinpoint sensitivity for
FM broadcasts, as well as the highest fidelity demodulation of HD Radio programs. While the M2.0X comes fully
loaded for reception and analysis, the M2.2R adds an Ethernet port plus Remote Dashboard software for remote
control monitoring, logging and alarms with E-mail notification.
Features
• High level direct [+7Vp-p] and antenna level RF inputs for AM and FM bands
• Bargraph metering of HD and analog programming
• 20 preset stations each for AM and FM bands
• HD Radio digital-to-analog signal, time, level and phase alignment
M2.0X
M2.2R
HD modulation monitor List $3,995.00
HD mod monitor w/ software, Ethernet List $5,995.00
Inovonics secures its place at the forefront of 21st
century technology with the Model 631—the latest
frequency-agile, digitally tuned receiver for FM
translator and other off-air applications. With menudriven access of display and function selections, the
631 gives you a dual IF bandwidth to quickly clear up
adjacent-signal problems. Antenna alignment will be a
breeze with the 631’s crisp readouts of signal strength
and multi-path distortion. You can remotely control or
monitor its selectable options and alarms, and highresolution bar graph readouts let you quickly see all
incoming RF and MPX/stereo audio levels, making the
631 as easy to use as it is to afford.
63100 List $1,490.00
Call BSW For Lowest Price: 800-426-8434
Australian Monitor
Dual AM/FM Tuner
DaySequerra HD Radio Tuners
A good thing just got better with these next-generation precision HD tuners from DaySequerra! Offering benchmark
sensitivity (< 5.0dBf in FM), they deliver incredibly accurate monitoring of analog and HD Radio AM and FM
broadcast signals. The single-rack space M-4.0X is loaded with features, including low-jitter DAC and Class-A biased
balanced XLR audio outputs for the highest fidelity reception and demodulation of HD Radio programs. The M4C is
a tabletop version with cosmetic handles and rubber bumpers and comes in either the M4CXLR with XLR outputs
or M4CRCA with RCA analog and digital outputs.
M4-0X
M4CXLR
M4CRCA
Rackmount HD Radio tuner Tabletop HD Radio tuner with XLR outputs
Tabletop HD Radio tuner with RCA outputs
List $1,595.00
List $1,595.00
List $1,595.00
Call BSW For Lowest Price: 800-426-8434
Rolls Digital AM/FM Tuner
TFT FM Modulation Monitors
and AM Modulation Monitor
With the 844A FM modulation monitor, you
get everything you need for complete proofof-performance measurements right on the
front panels (for distortion, an external analyzer
is needed), plus accuracy no other monitors
can match. The 844A combines a tunable RF
preselector, a baseband monitor and a stereo monitor.
A cost-effective alternative, the 884 FM monitor can be used for transmitter proof-of-performance
measurements or for off-air monitoring. The frequency synthesized preselector lets you compare your signal with
other stations. The 923A AM modulation monitor offers precise demodulator for accurate AM proof-of-performance
measurements, 500 kHz - 40 MHz (high level) without tuning.
844A List $5,150.00
884
List $3,965.00
923A List $1,625.00
Two Tuners in a Single Rack Space! The MYMDT dual
AM/FM tuner is perfect for off-air monitoring in the
control room or other studios where you need to
verify signal or monitor off-air audio. It features 10 user
selectable presets and AM Mono, FM stereo outputs on
both tuners. Basic antenna included.
MYMDT List $285.00 LowestPrice only $249!
Call BSW For Lowest Price: 800-426-8434
Replace your old analog tuner with the compact
Rolls HR78. The HR78 is a PLL synthesized digital
AM/FM tuner in a feature-packed half-rack-size chassis.
It comes with FM and AM antennas, and the 1/8" output
has plenty of juice to drive a pair of headphones.
Features
• Retains presets when power is off
• 18 presets, 12 FM and 6 AM
• Large LCD digital display
• Output Level control
• Auto search up and down
• US or International AM frequency centers
• RCA and 1/8" (3.5 mm) outputs
• Rack ears included
HR78 List $200.00
LowestPrice
only $179!
RF EQUIPMENT – MODULATION MONITORS & RECEIVERS
81
order/info: 1·800·426·8434 • www.bswusa.com
Fanfare FT-1AP Analog FM Monitor/Translator Receiver
Gorman EAS1 EAS Encoder/Decoder
The FT-1AP works like a charm at any translator site but its claim to fame is its ability
to thrive where reception is difficult. Its solid RF sensitivity and selectivity will maintain
your translator/repeater incoming reception at maximum efficiency even under
high RF saturation, narrow frequency offset or in a deep fringe location. Although
analog, its tuning accuracy is maintained by a computer-driven PLL circuit for superior
performance. It is also available with an amplified headphone jack option that
provides a gain-adjustable stereo output at 30dB into 8 ohm headphones.
FT-1AP
List $1,695.00
FT-1APHEADPHONEOPT List $100.00
EAS1 EAS encoder/decoder system
Call BSW For Lowest Price: 800-426-8434
List $1,950.00
Call BSW For Lowest Price: 800-426-8434
TFT EAS930A Multi-Module EAS Receiver System
The compact EAS 930A Multi-Module Receiver for use with TFT’s EAS 911
Emergency Alert System (adjacent page) is digitally tunable from the front panel and
comes complete with chassis, built-in monitor, power supply, AM receiver module, FM
receiver module, and 7-channel NOAA Weather Radio Receiver module. All modules
are frequency-synthesized and offer auto-changeover and alarm. A front panel LED in
each receiver confirms proper RF and audio levels. A 4th slot is available for another
receiver: AM, FM, VHF-Low, VHF-High, or UHF public safety.
Tascam TU690 AM/FM Tuner
The TU690 is an affordable AM/FM rack mountable tuner with an extensive feature set.
EAS930A
EAS930L2
Features:
• Quartz PLL synthesized tuning system
• Manual/auto/preset tuning; 30 FM/30 AM presets; preset memory back-up
• Multi-function florescent display; timer on/off and clock function
• Remote control
Call BSW For Lowest Price: 800-426-8434
TU690 List $329.99
LowestPrice
only $26999!
Rolls RS80 Quartz Synthesized AM/FM/RDS Tuner
Rolls' latest AM/FM tuner comes in a tight single-rack-space package and adds new
features such as RDS display, programmable 9-10 kHz AM centers switching so it may
be operated in the United States as well as Europe, 40 AM/FM presets, headphone
output, XLR outputs and signal strength meter. Remote control included.
RS80 List $333.00
LowestPrice
only $269!
AM FM and NOAA modules, with one empty slot
AM and FM modules, with two empty slots
List $1,580.00
List $1,185.00
Dayton
FM/SCA
Receiver
with
Stereo
Demodulator
Designed for FM monitoring requirements, the Dayton AF210 has Stereo, SCA and
RDS demodulators. It is frequency PLL controlled (switch selectable). Other features:
wide and narrow band AGC to prevent overload; selectable 50, 75 microseconds,
or no de-emphasis; selectable 25, 50 or 100 kHz (standard) frequency tuning steps;
selectable 150, 225 microsecond or no SCA de-emphasis; main or SCA 500mW audio
amplifier output; switchable 67 or 92 kHz SCA de-modulator; LED indicators for signal
strength, power, main carrier, stereo, SCA carrier and RDS presence; adjustable level
carrier detection relay one rack space chassis; balanced and unbalanced outputs;
composite audio output; SCA audio output.
AF210 List $639.95
LowestPrice
only $539!
Burk Watchband
Market Monitor
Dayton
EAS Receivers
The Watchband AM/FM/RDS desktop receiver
and PC software offers web-based market
monitoring tools to engineers, managers
and program directors. Delivering detailed
playlist reports with Radio Text, it lets
managers and program directors compare
their own rotations to other stations in the
market. Engineers can monitor real-time field
intensity data for any station, as well as review
strip charts for analysis of the entire band. It
logs stereo, phase, and L/R audio levels, as
well as averages and peaks for immediate
alarm reporting or historical review, while its
convenient web access lets broadcasters enjoy
its benefits no matter where they are.
Dayton provides a costeffective receiver package
for EAS requirements. The
AFC3DAYTON receiver rack
holds three receivers. It’s already outfitted with connectors
and circuit-boards and all you do is add receivers from AM,
FM, NOAA Weather or Public Service to fill the rack (each
receiver sold separately).
AFC3DAYTON Three receiver rack unit List $449.95 $41900
AF225C3
FM receiver
List $309.95 $24900
AF315C3
AM receiver
List $309.95 $24900
AF612
NOAA weather receiver List $319.95 $27900
AF565A
SCA receiver List $169.95 $13900
AF810
Public service receiver List $319.95 $28900
Features:
• Desktop receiver connects to user’s server PC; Windows server software
• Automatic playlist construction
• Audio metrics and field intensity measurements provide valuable analysis tools
• Remote audio playback, logging and skimming for easy monitoring of
group-owned and competitive stations
•C
onsolidated studio facilities can monitor off-air audio for stations
beyond the studio’s reception area
Dayton Frequency-Agile
FM/SCA Receiver
WATCHBAND
82
Gorman-Redlich provides a cost-effective EAS system. Features: 6 audio inputs;
selectable manual or automatic modes; programmable automatic interruption
of stereo program lines; five programmable relays to supply contact closures for
automation or other signal equipment; messages can be scrolled on a PC screen.
List $1,495.00
Call BSW For Lowest Price: 800-426-8434
RF EQUIPMENT – RECEIVERS & EAS EQUIPMENT
LowestPrice
system from $558!
The AF200A is a desktop
receiver with great
sensitivity, carrier
operated relay, balanced outputs, and carrier and modulation
indicators for both the main and SCA received signals.
AF200A List $329.95
LowestPrice
only $289!
order/info: 1·800·426·8434 • www.bswusa.com
All the Latest EAS Technology, Now at BSW
Digital Endec:
Next-Generation EAS Technology
from Sage Alerting System
Sage Digital Endec EAS Encoder
Sage is the most widely used EAS encoder in the industry. The Digital Endec offers an internal AES/EBU interface, LAN support,
and a Web Browser-based interface to support a new generation of EAS users. While the Digital ENDEC continues to support
Radio, TV and Cable users, it also supports the first responder and state/county/local emergency centers with emerging
standards such as IPAWS and CAP. Future-proof, it is designed to be ready for future revisions to the EAS system. Accessories
include Pro and Lite versions of Emergency Management Software, a relay panel to control up to 3 additional stations from a
single ENDEC and a remote control to activate functions within the ENDEC system. See our website for more details.
DIGITALENDEC EAS Encoder List $2,695.00
ENDEC-PRO
Emergency management software (pro) List $1,850.00
ENDEC-DJ
Emergency management software (lite) List $600.00
ENDEC-RP2
Multi-station relay panel List $1,025.00
ENDEC-RC1
Remote control List $1,150.00 Call BSW For Lowest Price: 800-426-8434
Features:
• 6 audio inputs; 6 serial ports
• Encoder and Microphone input
• 4x20 LCD display
• Internal speaker and Line Out
• Four contact closures
• Five GPIO inputs
• Web-Based control; 10/100 Base-T
LAN support
• 2 USB connectors for printers,
additional serial ports, future expansion
• Software is stored in FLASH and is
updateable via the LAN or the
USB interface
• AES/EBU Digital Audio Interrupt with
active switching
• 64 MByte onboard storage for log files
Digital Alert Systems DASDEC
Digital EAS Encoder/Decoder
The DASDEC from Digital Alert Systems is a PC-based
digital EAS encoder/decoder and display controller
that provides legacy EAS compatibility while offering
modern LAN-based communications methods and
technology to support the emergence of all-digital
broadcasting. A turnkey EAS system consisting of an
embedded PC in a custom chassis, the DASDEC is
configured for a standard 19-inch rack mounting in a
2-RU case. The chassis houses three Web browser-tuned
radio receivers for EAS monitoring of AM, FM, or NOAA,
an internal NTSC full screen character generator, USB
and network connections, balanced analog audio EAS
override switching and optional AES alert audio output.
Remote access for setup, review, and operation of the system is provided via a Web browser.
Encoding consists of a simple selection of EAS parameters from pre-built lists, and playout
of EAS alerts is accomplished by user-operated GUI controls or GPI inputs. Additionally, the
DASDEC provides expanded interface controls for a wide range of EAS-associated peripheral equipment.
DASDEC
SAS-RADIO
Digital EAS Encoder List $2,995.00
Broadcast Radio Specific Application Software" (required for each DASDEC unit) List $1,180.00
Call BSW For Lowest Price: 800-426-8434
TFT EAS 911 EAS Encoder/Decoder
The EAS911R4 encoder/decoder includes printer,
digital recorder and four audio inputs, and is part
of a modular system that can be configured to
fit many applications. Features: lighted keys; all
programming, tests and entry are performed on
front buttons; practice key allows off-line training.
The EAS911D decoder permits full EAS
compliance for stations who qualify for decoderonly operation. The decoder will operate either
EAS911R4
automatically or manually. It has two self-contained,
frequency-agile receivers for FCC mandated monitoring
assignments, with one AM and one FM module (can also be ordered
AM/AM or FM/FM). Features: decodes and forwards EAS emergency messages;
RS-232 character generator interface; built-in impact printer; voice recorder.
The new EAS629 is a dual digital insertion unit. It Interrupts two separate AES/EBU
streams and inserts an analog (L,R) or AES/EBU stream. The two sections function
independently and seamlessly. A typical application is insertion of EAS information
from a TFT EAS Encoder/Decoder into two separate digital program audio streams.
EAS911R4
EAS940A
EAS911D
EAS629
EAS encoder/decoder with 4 audio inputs
Program/transmitter interrupt unit
EAS decoder
Dual digital insertion unit
List $2,195.00
List $595.00
List $2,105.00
List $3,495.00
EAS911D
Call BSW For Lowest Price: 800-426-8434
RF EQUIPMENT – EAS
83
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising