Untitled - Farnell
For over 50 years FANE have designed and manufactured high quality, high power component
loudspeakers. FANE loudspeakers have been supplied worldwide to a customer-base which includes
some of the most prestigious manufacturers of complete sound systems, and for applications
covering almost every conceivable facet of sound production and reproduction.
As a result, FANE-manufactured loudspeakers components
user convenience combined with subtle and sophisticated
have been used by the vast majority of the world’s leading
cosmetic design demanded by the foremost musical artists,
musical entertainments and have featured in systems
sound consultants and concert managements.
installed in some of the world’s most prestigious venues.
FANE Systems comprises the finest available range of
The question has often been asked – “Why does FANE
sound system designs, equipped with a special series
not produce its own range of integrated sound systems?”
of customised FANE drive units, fine tuned by the FANE
Until now the reason has been the shortage of space and
research team to optimise every aspect of audio excellence
time within a company busily attempting to satisfy a world
from this unique series of enclosure designs. The range
demand for FANE component products. Expanding capacity
is manufactured in best quality birch plywood throughout
has made possible the logical progression to complete
with high quality and integral hardware. Hanging/mounting
sound systems by FANE.
fitments are supplied and fitted as standard to ensure
that every type of venue and system location can be
FANE Systems represent a major stage towards the
accommodated.
development of FANE into an all-embracing sound
company with the promise of advanced and innovative,
FANE Systems represent the ultimate extended range.
professional amplification and processing equipment to
Super powerful sound reproduction for every professional
follow. As with component audio products, the sound
application with the tonal distinction and colouration that is
system design philosophy continues to be researched – a
a hallmark of FANE’s signature quality of performance.
quest for the ultimate quality, performance, reliability and
2
SV-8
SV-8 loudspeaker system is suitable for near field main
PA reinforcement with subwoofer, portable system or
permanent installation, wall, stand, or ceiling mountings,
monitoring for vocals, delay fill or under balcony
complementary diffusion.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
250 w RMS (EIA 426A standard)
500 w programme / 1000 w peak
95 dB/ 2.83V/1m
(average 200~16,000 Hz wideband)
119 dB continuous / 122 dB programme
/ 125 dB peak
58~18500 Hz
Manufacturing Consistency
+/- 3dB from 200 to 10,000 Hz
80 x 60° above 1800Hz
Recommended Amplifier
Up to 500 w at 8Ω (no clip) in specified
frequency response
Recommended Low Cut
Full range: 50 Hz 18 dB/oct Butterworth
Top: 70 to 140 Hz 24 dB/oct LinkwitzRiley
Low Frequency Driver
FANE transducer 8Ω impedance
8” (200 mm) diameter
2” high temperature voice coil on glass
fibre former
High Frequency Driver
FANE Compression Driver 8Ω impedance
1” (25 mm) exit, 1.34” (34 mm) voice coil
Titanium diaphragm
Crossover
ADDITIONAL SPECIFICATIONS
Flying Hardware
8 Ω (7.6 Ω minimum at 66 Hz)
Frequency Response (-6dB)
Nominal Directivity (-6dB)
KEY FEATURES
• Hi-fidelity sound without any EQ
• Real 250 w RMS power handling (EIA 8 hrs Std)
• Equipped with premium FANE Drivers
• Elliptic 80ºx60º low resonance glass fibre horn
• Multi purpose cabinet design for FOH or monitor use
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
Passive mode only
3 kHz Right Phase design
250V polypropylene capacitors
Air core inductors on HF
Aluminium housed resistors
5 M8 points with internal metal brackets
4 M8 points compatible with Powerdrive
Type 45 mounting accessories or equivalent omnimount system
Pole Mount
Yes with optional adapter
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove assembly 15 mm Russian birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
430 x 280 x 298 mm
Packing Carton Size (HxWxD)
494 x 344 x 352 mm
Weight
Optional Accessories
10 kg net
11.5 kg gross
Flight case with 100 mm wheels (for 4pcs)
Abrasive resistant cover bag
M8 Eye bolt kit
Wall mounting bracket
U Mounting bracket
Flying adapter
Compatible with Powerdrive type 75 and
Omnimount
35 mm pole mount adapter
3
dB SPL
SV-8
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
FREQUENCY RESPONSE DATA
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type
consisting of one 8” (200mm) direct radiating reflex loaded
low frequency transducer and one 1” (25mm) exit / 1.34”
(34mm) voice coil HF compression driver that is mounted on
a constant directivity elliptic glass fibre horn that provides a
nominal coverage angle of 80° (horizontal) by 60° (vertical). The
frequency response shall be 65 to 18000Hz in half space with
less than ± 3dB variation. Low and high frequency sections
shall be integrated by an internal 3kHz passive crossover
network with Right Phase technology and 18dB/oct slopes.
Power handling shall be 250W RMS, 1000W peak by EIA 426A
standard (8 hours pink noise) average wideband (200-16000Hz).
Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall
be 119B continuous / 125dB peak. Rated impedance shall be
8Ωs nominal.
4
The multi-angled enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing, multi
position 35mm pole mount and threaded M8 inserts for wall and
ceiling mounting. The screws shall be stainless steel 316L with
200 hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 280x430x298m and Weight 10kg.
SV-10
SV-10 loudspeaker system is suitable for near field main
PA reinforcement with subwoofer, portable system or
permanent installation, wall, stand, or ceiling mountings,
monitoring for vocals and instruments, delay fill or under
balcony complementary diffusion.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
300 w RMS (EIA 426A standard)
600 w programme / 1200 w peak
95 dB/ 2.83V/1m
(average 200~16,000 Hz wideband)
120 dB continuous / 123 dB programme
/ 126 dB peak
51~18500 Hz
Manufacturing Consistency
+/- 3 dB from 200 to 10,000 Hz
80 x 60° above 1600Hz
Recommended Amplifier
Up to 600 w at 8Ω (no clip) in specified
frequency response
Recommended Low Cut
Full range: 50 Hz 18 dB/oct Butterworth
Top: 70 to 140 Hz 24 dB/oct LinkwitzRiley
Low Frequency Driver
FANE transducer 8Ω impedance
10” (250 mm) diameter
3” high temperature voice coil on glass
fibre former
High Frequency Driver
FANE Compression Driver 8Ω impedance
1” (25 mm) exit, 1.34” (34 mm) voice coil
Titanium diaphragm
Crossover
ADDITIONAL SPECIFICATIONS
Flying Hardware
8 Ω (8.3 Ω minimum at 62Hz)
Frequency Response (-6dB)
Nominal Directivity (-6dB)
KEY FEATURES
• Hi-fidelity sound without any EQ
• Real 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium FANE Drivers
• Elliptic 80ºx60º low resonance glass fibre horn
• Multi purpose cabinet design for FOH or monitor use
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
Passive mode only
2.6 kHz Right Phase design
400V polypropylene capacitors
Air core inductors on HF
Aluminium housed resistors
10 M8 points with internal metal brackets
4 M8 points compatible with Power drive
Type 45 mounting accessories or equivalent Omnimount system
Pole Mount
Multi position 35mm pot
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 15 and 18 mm Russian birch
plywood exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
530 x 350 x 330 mm
Packing Carton Size (HxWxD)
594 x 414 x 394 mm
Weight
Optional Accessories
13 kg net
15 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Wall mounting bracket
U Mounting bracket
Flying adapter
Compatible with Powerdrive type 75 and
Omnimount
5
dB SPL
SV-10
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
FREQUENCY RESPONSE DATA
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type
consisting of one 10” (250mm) direct radiating reflex loaded
low frequency transducer and one 1” (25mm) exit / 1.34”
(34mm) voice coil HF compression driver that is mounted on
a constant directivity elliptic glass fibre horn that provides a
nominal coverage angle of 80° (horizontal) by 60° (vertical). The
frequency response shall be 56 to 18000Hz in half space with
less than ± 3dB variation. Low and high frequency sections
shall be integrated by an internal 2.6kHz passive crossover
network with Right Phase technology and 18dB/oct slopes.
Power handling shall be 300W RMS, 1200W peak by EIA 426A
standard (8 hours pink noise) average wideband (200-16000Hz).
Efficiency on axis shall be 95dB/1W/1m and maximum SPL shall
be 120B continuous / 126dB peak. Rated impedance shall be
8Ωs nominal.
6
The multi-angled enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing, multi
position 35mm pole mount and threaded M8 inserts for wall and
ceiling mounting. The screws shall be stainless steel 316L with
200 hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 350x530x330mm and Weight 13kg.
SV-12
SV-12 loudspeaker system is suitable for near field main PA
reinforcement with or without subwoofer, portable system
or permanent installation, wall, stand, or ceiling mountings,
monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
300 w RMS (EIA 426A standard)
600 w programme / 1200 w peak
8 Ω (7.5 Ω minimum at 58 Hz)
97 dB/ 2.83V/1m
(average 200~16,000 Hz wideband)
122 dB continuous / 125 dB programme
/ 128 dB peak
Frequency Response (-6dB)
50~19000 Hz
Manufacturing Consistency
+/- 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Recommended Amplifier
Recommended Low Cut
80 x 60° above 1500Hz
Up to 600 w at 8Ω (no clip) in specified
frequency response
Full range: 45 Hz 18 dB/oct Butterworth
Top: 60 to 140 Hz 24 dB/oct LinkwitzRiley
Low Frequency Driver
FANE transducer 8Ω impedance
12” (300 mm) diameter
2.5” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil
Heat treated Titanium diaphragm
Crossover
KEY FEATURES
• Hi-fidelity sound without any EQ
• Real 300 w RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE Drivers
• Elliptic 80ºx60º low resonance glass fibre horn
• Multi purpose cabinet design for FOH or monitor use
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
12 M8 points with internal metal brackets
Pole Mount
Multi position 35 mm pot
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 15 and 18 mm Russian birch
plywood exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
590 x 380 x 360 mm
Packing Carton Size (HxWxD)
654 x 444 x 424 mm
Weight
Optional Accessories
20 kg net
23 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Wall mounting bracket
U Mounting bracket
Flying adapter
Passive mode only
2,2k Hz Right Phase design
400V polypropylene capacitors
Air core inductors on HF
Aluminium housed resistors
7
dB SPL
SV-12
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
FREQUENCY RESPONSE DATA
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type
consisting of one 12” (300mm) direct radiating reflex loaded
low frequency transducer and one 1” (25mm) exit / 1.7”
(44mm) voice coil HF compression driver that is mounted on
a constant directivity elliptic glass fibre horn that provides a
nominal coverage angle of 80° (horizontal) by 60° (vertical). The
frequency response shall be 56 to 18500Hz in half space with
less than ± 3dB variation. Low and high frequency sections
shall be integrated by an internal 2.2kHz passive crossover
network with Right Phase technology and 18dB/oct slopes.
Power handling shall be 300W RMS, 1200W peak by EIA 426A
standard (8 hours pink noise) average wideband (200-16000Hz).
Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall
be 122dB continuous / 128dB peak. Rated impedance shall be
8Ωs nominal.
8
The multi-angled enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing, multi
position 35mm pole mount and threaded M8 inserts for wall and
ceiling mounting. The screws shall be stainless steel 316L with
200 hours coating per ASTM-B117. The finish shall be a black
matt multi layer UltraTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 380x590x360mm and Weight 20kg.
SV-15
SV-15 loudspeaker system is suitable for near field main PA
reinforcement with or without subwoofer, portable system
or permanent installation, wall, stand, or ceiling mountings,
monitoring for vocals and instruments, side fill in small
stages, delay fill or under balcony complementary diffusion.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
600 w RMS (EIA 426A standard)
1200 w programme / 1800 w peak
8 Ω (7.5 Ω minimum at 51Hz)
98 dB/ 2.83V/1m
(average 200~16,000 Hz wideband)
126 dB continuous / 129 dB programme
/ 132 dB peak
Frequency Response (-6dB)
48~19000 Hz
Manufacturing Consistency
+/- 3dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Recommended Amplifier
Recommended Low Cut
80 x 60° above 1500 Hz
Up to 1200 w at 8Ω (no clip) in specified
frequency response
Full range: 40 Hz 18 dB/oct Butterworth
Top: 60 to 140 Hz 24 dB/oct LinkwitzRiley
Low Frequency Driver
FANE transducer, 8 Ω impedance
15” (380 mm) diameter
3” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit, 1.7” (44 mm) voice coil
Heat treated Titanium diaphragm
Crossover
KEY FEATURES
• Hi-fidelity sound without any EQ
• Real 600 w RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE Drivers
• Elliptic 80ºx60º low resonance glass fibre horn
• Multi purpose cabinet design for FOH or monitor use
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
12 M8 points with internal metal brackets
Pole Mount
Multi position 35 mm pot
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 18 mm Russian birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
708 x 442 x 446 mm
Packing Carton Size (HxWxD)
772 x 506 x 510 mm
Weight
Optional Accessories
28 kg net
31 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Wall mounting bracket
U Mounting bracket
Flying adapter
Passive mode only
2 kHz Right Phase design
400V polypropylene capacitors
Air core inductors on HF
Aluminium housed resistors
9
dB SPL
SV-15
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
FREQUENCY RESPONSE DATA
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type
consisting of one 15” (380mm) direct radiating reflex loaded
low frequency transducer and one 1” (25mm) exit / 1.7”
(44mm) voice coil HF compression driver that is mounted on
a constant directivity elliptic glass fibre horn that provides a
nominal coverage angle of 80° (horizontal) by 60° (vertical). The
frequency response shall be 54 to 18500Hz in half space with
less than ± 3dB variation. Low and high frequency sections
shall be integrated by an internal 2kHz passive crossover
network with Right Phase technology and 18dB/oct slopes.
Power handling shall be 600W RMS, 1800W peak by EIA 426A
standard (8 hours pink noise) average wideband (200-16000Hz).
Efficiency on axis shall be 98dB/1W/1m and maximum SPL shall
be 122dB continuous / 128dB peak. Rated impedance shall be
8Ωs nominal.
10
The multi-angled enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing, multi
position 35mm pole mount and threaded M8 inserts for wall and
ceiling mounting. The screws shall be stainless steel 316L with
200 hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 442x708x446mm and Weight 28kg.
SV-115 S
SV-115S subwoofer system is suitable for bass
reinforcement for main PA systems, touring or permanent
installations in small to medium stages, indoor or outdoor
live performances, arenas, night clubs, houses of worship,
auditoriums and theatres.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
600 w RMS (EIA 426A standard)
1200 w programme / 1800 w peak
8 Ω (8.8 Ω minimum at 46 Hz)
97 dB/ 2.83V/1m
(average 50~1,000 Hz wideband)
125 dB continuous / 128 dB programme
/ 131 dB peak
Frequency Response (-6dB)
39~2500 Hz
Manufacturing Consistency
+/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional (cardoid presets available
on FANE DSP amplifiers)
Recommended Amplifier
Up to 1200 w at 8Ω (no clip) in specified
frequency response
Recommended Crossover
Low pass: 80 to 150 Hz 24 dB/oct
Linkwitz-Riley
High pass: 35 Hz 18 dB/oct Butterworth
Low Frequency Driver
Crossover
Fane Transducer, 8 Ω impedance
15” (380 mm) diameter
3” high temperature voice coil on glass
fibre former
KEY FEATURES
• High performance compact subwoofer
• Real 600W RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE long excursion Driver
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
8 M8 points with internal metal brackets
Pole Mount
35 mm metal
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 18 mm Russian birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
545 x 505 x 605 mm
Packing Carton Size (HxWxD)
609 x 569 x 669 mm
Weight
Optional Accessories
34 kg net
38 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Adjustable coupling bar
No, active usage only
FANE DSP recommended
11
SV-115 S
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of one 15”
(380mm) direct radiating reflex loaded low frequency transducer
with high excursion ability. The frequency response shall be
44 to 2000Hz in half space with less than ± 3dB variation.
Power handling shall be 600W RMS, 1800W peak by EIA 426A
standard (8 hours pink noise) average wideband (50-1000Hz).
Efficiency on axis shall be 97dB/1W/1m and maximum SPL shall
be 125dB continuous / 131dB peak. Rated impedance shall be
8Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing,
metal 35mm pole mount and threaded M8 inserts for ceiling
12
mounting. The screws shall be stainless steel 316L with 200
hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 505x545x605mm and Weight 29kg.
SV-152
SV-152 loudspeaker system is suitable for near field main
PA reinforcement with or without subwoofer, portable
system or permanent installation, monitoring for drums,
sidefill in small stages or delay fill complementary diffusion.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
1000 w RMS (EIA 426A standard)
2000 w programme / 4000 w peak
4 Ω (3.7 Ω minimum at 47Hz)
100 dB/ 2.83V/1m
(average 200~16,000Hz wideband)
130 dB continuous / 133 dB programme
/ 136 dB peak
Frequency Response (-6dB)
46~19000 Hz
Manufacturing Consistency
+/- 3 dB from 200 to 10,000 Hz
Nominal Directivity (-6dB)
Recommended Amplifier
Recommended Low Cut
60 x 40° above 1500 Hz
Up to 2000w at 4Ω (no clip) in specified
frequency response
Full range: 30 Hz 18 dB/oct Butterworth
Top: 55 - 125 Hz 24 dB/oct Linkwitz-Riley
Low Frequency Driver
2x FANE transducers 8Ω impedance
15” (380 mm) diameter chassis
3” high temperature voice coil on glass
fibre former
High Frequency Driver
1” (25 mm) exit. 1.7” (44 mm) voice coil
Heat treated Titanium diaphragm
Crossover
KEY FEATURES
• Hi-fidelity sound without any EQ
• Real 1000w RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE Drivers
• Elliptic 60ºx40º low resonnance glass fibre horn
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of flying hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
8 M8 points with internal metal brackets
Pole Mount
Not available
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 18 mm Russian birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
1125 x 442 x 468 mm
Packing Carton Size (HxWxD)
1179 x 496 x 522 mm
Weight
Optional Accessories
52 kg net
57 kg gross
Abrasive resistant cover bag
M8 Eye bolt kit
Passive mode only
2 kHz Right Phase design
400V polypropylene capacitors
Air core inductors on HF
Aluminium housed resistors
13
dB SPL
SV-152
140.0
140.0
130.0
130.0
120.0
120.0
110.0
110.0
100.0
100.0
90.0
90.0
80.0
80.0
70.0
70.0
60.0
60.0
50.0
50.0
40.0
40.0
30.0
30.0
20.0
20.0
10.0
10.0
0.0
dB SPL
FREQUENCY RESPONSE DATA
0.0
50
100
200
500
1k
2k
FREQUENCY (Hz)
5k
10k
20k
MLS - 1/6th OCTAVE 4PI (free space)
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a passive, 2 way type
consisting of two 15” (380 mm) direct radiating reflex loaded low
frequency transducer and one 1” (25 mm) exit / 1.7” (44 mm)
voice coil HF compression driver that is mounted on a constant
directivity elliptic glass fibre horn that provides a nominal
coverage angle of 60°(horizontal) by 40° (vertical). The frequency
response shall be 52 to 18500Hz in half space with less than
± 3dB variation. Low and high frequency sections shall be
integrated by an internal 2kHz passive crossover network with
RightPhase technology and 18dB/oct slopes. Power handling
shall be 1000w RMS, 4000w peak by EIA 426A standard (8
hours pink noise). Average wideband (200-16000Hz) efficiency
on axis shall be 100dB/1W/1m and maximum SPL shall be
14
130dB continuous / 136dB peak. Rated impedance shall be 4
ohms nominal.
The enclosure shall be of a void free multi-laminate Russian
birch ply construction with sealed internal bracing and threaded
M8 inserts for ceiling mounting. The screws shall be Stainless
Steel 316L with 200 hours coating per ASTM-B117. The finish
shall be a black mat multi layer HardTex water based painting
with hardness higher than 75Hv. The front of the enclosure shall
be protected by a black mat dual layer coated (powder + acrilyc)
1.5 mm thick steel acoustically transparent grille. Dimensions
shall be (HxWxD) 1125x442x468mm and Weight 52kg.
SV-118 S
SV-118S subwoofer system is suitable for bass
reinforcement for main PA systems, touring or permanent
installations in small to medium stages, indoor or outdoor
live performances, arenas, night clubs, houses of worship,
auditoriums and theatres.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
800 w RMS (EIA 426A standard)
1600 w programme / 2400 w peak
8 Ω (8.8 Ω minimum at 34 Hz)
99 dB/ 2.83V/1m
(average 50~1,000 Hz wideband)
128 dB continuous / 131 dB programme
/ 134 dB peak
Frequency Response (-6dB)
30~1300 Hz
Manufacturing Consistency
+/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Recommended Amplifier
Recommended Crossover
Low Frequency Driver
Crossover
Omnidirectional (cardoid presets available
on FANE DSP amplifiers)
Up to 1600 w at 8Ω (no clip) in specified
frequency response
Low pass: 70 to 125 Hz 24 dB/oct
Linkwitz-Riley
High pass: 30 Hz 18 dB/oct Butterworth
Fane Transducer, 8 Ω impedance
18” (460 mm) diameter
4” high temperature voice coil on glass
fibre former
KEY FEATURES
• High performance compact subwoofer
• 30Hz usable frequency
• Real 800 w RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE long excursion Driver
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
8 M8 points with internal metal brackets
Pole Mount
35 mm metal
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 18 mm and 24 mm Russian
birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
600 x 561 x 705 mm
Packing Carton Size (HxWxD)
664 x 625 x 769 mm
Weight
Optional Accessories
45 kg net
50 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Adjustable coupling bar
No, active usage only
FANE DSP recommended
15
SV-118 S
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of one 18”
(460mm) direct radiating reflex loaded low frequency transducer
with high excursion ability. The frequency response shall be
35 to 1300Hz in half space with less than ± 3dB variation.
Power handling shall be 800W RMS, 2400W peak by EIA 426A
standard (8 hours pink noise) average wideband (50-1000Hz).
Efficiency on axis shall be 99dB/1W/1m and maximum SPL shall
be 128dB continuous / 134dB peak. Rated impedance shall be
8Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing,
16
metal 35mm pole mount and threaded M8 inserts for ceiling
mounting. The screws shall be stainless steel 316L with 200
hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 561x600x705mm and Weight 45kg.
SV-215 S
SV-215S subwoofer system is suitable for bass
reinforcement for main PA systems, touring or permanent
installations in small to medium stages, indoor or outdoor
live performances, arenas, night clubs, houses of worship,
auditoriums and theatres .
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
1200 w RMS (EIA 426A standard)
2400 w programme / 4800 w peak
4 Ω (4.4 Ω minimum at 46Hz)
100 dB/ 2.83V/1m
(average 50~1,000 Hz wideband)
131 dB continuous / 134 dB programme
/ 137 dB peak
Frequency Response (-6dB)
39~2500 Hz
Manufacturing Consistency
+/- 3 dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional (cardoid presets available
on FANE DSP amplifiers)
Recommended Amplifier
Up to 2400 w at 4Ω (no clip) in specified
frequency response
Recommended Crossover
Low pass: 80 to 150 Hz 24 dB/oct
Linkwitz-Riley
High pass: 35 Hz 18 dB/oct Butterworth
Low Frequency Driver
Crossover
2x FANE transducers 8Ω impedance
15” (380 mm) diameter
3” high temperature voice coil on glass
fibre former
KEY FEATURES
• High performance compact subwoofer
• Real 1200 w RMS power handling (EIA 8 hours Standard)
• Equipped with premium FANE long excursion Driver
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm metal
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
Cabinet Size (HxWxD)
Packing Carton Size (HxWxD)
Weight
Optional Accessories
CNC made with tongue and groove
assembly 18 mm Russian birch plywood
exterior grade
Proprietary HardTex sanded coating,
black matt
480 x 960 x 686 mm
1024 x 544 x 750 mm
55 kg net
59 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Adjustable coupling bar
No, active usage only
FANE DSP recommended
17
SV-215 S
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of two 15”
(380mm) direct radiating reflex loaded low frequency transducer
with high excursion ability. The frequency response shall be 44
to 2000Hz in half space with less than ± 3dB variation. Power
handling shall be 1200W RMS, 4800W peak by EIA 426A
standard (8 hours pink noise) average wideband (50-1000Hz).
Efficiency on axis shall be 100dB/1W/1m and maximum SPL
shall be 131dB continuous / 137dB peak. Rated impedance
shall be 4Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing,
metal 35mm pole mount and threaded M8 inserts for ceiling
18
mounting. The screws shall be stainless steel 316L with 200
hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.8 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 960x480x686mm and Weight 55kg.
SV-218 S
SV-218S subwoofer system is suitable for bass
reinforcement for main PA systems, touring or permanent
installations in medium to large stages, indoor or outdoor
live performances, arenas, stadiums, night clubs, houses of
worship, auditoriums and theatres.
ACOUSTIC SPECIFICATIONS
Power Handling
Nominal Impedance
Average Sensitivity
Calculated Maximum SPL / 1m
1600 w RMS (EIA 426A standard)
3200 w programme / 6400 w peak
4 Ω (4.5 Ω minimum at 35 Hz)
102 dB/ 2.83 V/1m
(average 50~1,000 Hz wideband)
134 dB continuous / 137 dB programme
/ 140 dB peak
Frequency Response (-6dB)
32~1300 Hz
Manufacturing Consistency
+/- 3dB from 100 to 1,000 Hz
Nominal Directivity (-6dB)
Omnidirectional (cardoid presets available
on FANE DSP amplifiers)
Recommended Amplifier
Up to 3200 w at 4Ω (no clip) in specified
frequency response
Recommended Crossover
Low pass: 70 to 125 Hz 24 dB/oct
Linkwitz-Riley
High pass: 30 Hz 18 dB/oct Butterworth
Low Frequency Driver
Crossover
2x FANE transducers 8Ω impedance
18” (460 mm) diameter
4” high temperature voice coil on glass
fibre former
KEY FEATURES
• High performance compact subwoofer
• 30 Hz usable frequency
• Real 1600 w RMS power handling (EIA 8 hours Standard)
• Equipped with famous FANE long excursion Driver
• Rock solid void-free birch plywood cabinet
• Touring grade HardTex coating with sanded black matt finish
• Complete line of hardware accessories
• DSP preset support on associated electronics
ADDITIONAL SPECIFICATIONS
Flying Hardware
Not Available
Pole Mount
35 mm metal
Connectors
2pcs NEUTRIK Speakon NL4MP
1+/1-: speaker Input
2+/2-: Link
Cabinet
Finish
CNC made with tongue and groove
assembly 18 mm and 24 mm Russian
birch plywood exterior grade
Proprietary HardTex sanded coating,
black matt
Cabinet Size (HxWxD)
561 x 1060 x 768 mm
Packing Carton Size (HxWxD)
625 x 1124 x 832 mm
Weight
Optional Accessories
85 kg net
91 kg gross
Flight case with 100 mm wheels
Abrasive resistant cover bag
M8 Eye bolt kit
Adjustable coupling bar
No, active usage only
FANE DSP recommended
19
SV-218 S
ARCHITECTURAL SPECIFICATIONS
The subwoofer system shall be active, consisting of two 18”
(460mm) direct radiating reflex loaded low frequency transducer
with high excursion ability. The frequency response shall be 36
to 1300Hz in half space with less than ± 3dB variation. Power
handling shall be 1600W RMS, 6400W peak by EIA 426A
standard (8 hours pink noise) average wideband (50-1000Hz).
Efficiency on axis shall be 102dB/1W/1m and maximum SPL
shall be 134dB continuous / 140dB peak. Rated impedance
shall be 4Ωs nominal.
The stackable enclosure shall be of a void free multi-laminate
Russian birch ply construction with sealed internal bracing,
metal 35mm pole mount and threaded M8 inserts for ceiling
20
mounting. The screws shall be stainless steel 316L with 200
hours coating per ASTM-B117. The finish shall be a black
matt multi layer HardTex water based painting with hardness
higher than 75Hv. The front of the enclosure shall be protected
by a black matt dual layer coated (powder + acrylic) 1.5 mm
thick steel acoustically transparent grille. Dimensions shall be
(WxHxD) 561x1060x768mm and Weight 85kg.
FANE INTERNATIONAL LTD.
Sovereign House
Gilcar Way
Wakefield Europort
Castleford WF10 5QS
United Kingdom
Tel:
+44 (0)1924 224618
Fax:
+44 (0)1924 899166
Email: info@fane-international.com
www.fane-international.com
Fane International Ltd operates a policy of continuous product development and reserves the right to change specification at any time without notice.
Any specifications or product images in this document are correct at the time of print. © 2011, Fane International Ltd.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising