CM4101 Multi Format 4:2:2 10-bit AVC Encoder H.264 HD/SD

CM4101 Multi Format 4:2:2 10-bit AVC Encoder H.264 HD/SD
LIVE
MEDIA
CM4101
Multi Format 4:2:2 10-bit AVC Encoder
H.264 HD/SD Encoder for Contribution
over Satellite and IP networks
As the world‘s first H.264 4:2:2 10-bit Encoder
supporting from Main to High 4:2:2 profile, CM4101
is designed for contribution and distribution markets
where premium quality and performance are more
important than ever.
The CM4101, used in combination with ATEME IRD
DR8400, is ATEME’s cutting edge solution to
Primary contribution, bringing Video Quality with 10bit accuracy and controlled low latency.
KEY FEATURES
4:2:2 / 4:2:0 8-bit / 10-bit SD/HD support
Very Low Latency Mode
FEC Pro MPEG and BISS - 0/1/E support
MPEG-2 SD and HD support*
Easy front panel setup
CM4101 allows upgradeability from 4:2:0 SD up to
4:2:0/4:2:2 SD/HD with a simple license, a future
proof solution to protect your investment.
By offering the first H264 4:2:2 10-bit complete
solution, ATEME takes another technology step
improving Video Quality over 8-bit, securing your
Video Quality, end to end, completing the Video
Quality chain from Primary Contribution point to
Distribution point.
BENEFITS
True H.264 4:2:2 10-bit Solution, with CM4101 in
combination with the DR8400, no downscale
format in the Contribution chain
10-bit accuracy allowing high video quality from
source to distribution with the best bandwidth
efficiently
CM4101 soft upgradeability, opening a safe path of
evolution from 4:2:0 SD to 4:2:2 SD/HD 10-bit
Because Content Deploys Everywhere
www.ateme.com
CM4101
VIDEO SPECIFICATIONS
Video Compression
SD/HD MPEG-4 AVC/H.264 10-bit or 8-bit – Main,
High and High 4:2:2 Profile up to Level 4.1
SD/HD MPEG-2 422P@ML /HL
Options:
- HD license.
- 4:2:2 8b license.
- 4:2:2 10b license.
Video formats
HD: 1080i, 720p and 1080psf
SD: 576i and 480i
Input format detection
Encoding bit rate
OUTPUT TRANSPORT LAYER
SPECIFICATIONS
MPEG-2 Transport Stream over UDP/IP or
RTP/UDP/IP
RTP/RTSP over UDP
Unicast / multicast streaming
MPEG-2 Transport Stream over DVB-ASI
ASI and IP streaming simultaneously
Options:
- FEC Pro MPEG CoP3r2 (SMPTE2022)
- BISS 0/1/E Encryption.
INPUTS / OUTPUTS INTERFACES
Video Input
HD-SDI (SMPTE292M)
SD-SDI (SMPTE 259M-C)
SD: 0.5 to 30 Mbps, HD: 1 to 62.5Mbps
Audio Input:
Resolutions
1080i x 1920, 1536, 1440, 1280 and 960 pixels
720p x 1280, 1024, 960 and 640 pixels
576i x 720, 576, 544, 480 and 352 pixels
480i x 720, 640, 576, 544, 480 and 352 pixels
Frame rates
1080i @ 25, 29.97, 30 Hz
1080p@ 23.97, 24, 25 Hz
720p @ 50, 59.94 and 60 Hz
576i @ 25 Hz, 480i @ 29.97 and 30 Hz
Video Processing
Fixed or adaptive configuration
Automatic I frame insertion
Automatic scene cut detection
Multi-pass look-ahead CBR and Capped VBR
Linear and nonlinear spatial filtering*
Inverse telecine (3:2 pull-down)
Logo insertion
Ancillary data and signalling
Closed captioning compliant with EIA-608, EIA-708,
SMPTE 334 and standard ATSC.
DVB Teletext/CEEFAX
Vchip parental control
VITC Time code
Wide Screen Signalling (WSS)
Active Format Description (AFD)
Digital Program Insertion (DPI)*
SCTE35 insertion via SCTE104 triggers or GPIO
Standard: MPEG-2 TS / DVB / ATSC/ ISDB
AUDIO SPECIFICATIONS
Number of Channels
Native Encoding up to 8 stereo pairs, 5.1 audio service
supports.
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E, AC.3/EAC.3 pass-through.
Dolby Digital Options*:
Dolby Digital E decode to AAC LC, AAC HEv1
or Dolby Digital AC.3/EAC.3 Encode
Sampling frequency: 32, 44.1, 48 KHz
Because Content Deploys Everywhere
Embedded in SD-SDI (up to 8 stereo channel pairs
SDI input)
AES-EBU input up to 8 stereo pairs or Analog input
up to 8 Audio balanced (-10 dBV to +20 dBV/600
ohms)
Output Interfaces
- 3 Gigabit Ethernet ports (100/1000 BaseT
connectors): 2 ports for service streaming, 1 port outof-band for management.
- 3 DVB-ASI outputs (75 Ohm BNC connector).
Discreet I/O*
Alarms and synchronization triggered on GPIO DB-9
connector.
CONFIGURATION AND MANAGEMENT
DataMiner Networks Management System
SNMP (MIB v2c) with remote SNMP supervisor
Embedded web-server configuration
Front panel with LCD/keypad
PHYSICAL
Dimensions 19” 1-RU (482x44,5x 508 mm/19”x1.75”x
20”)
Weight 7.5 kg/16.5 lbs
ENVIRONMENTAL
Cooling air flow from front to back
Operating temperature 5 to 40 °C / +41 ° to +104 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non condensing)
Input voltage range 100-240 VAC, 50/60 Hz
Typical consumption 80 W
CERTIFICATIONS
ROHS
CE and FCC class B Certifications, ECM Compliancy:
- EN 55022: 2006,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2 : 2005,
- EN 61000-3-3: 1995 / A1 : 2001 / A2 : 2005,
Safety:
- EN/UL/CA 60950-1
*Contact Factory for availability
www.ateme.com
LIVE
MEDIA
DR8400
Professional 4:2:2 10-bit Integrated
Receiver / Decoder
H.264 10-bit HD/SD for Contribution over
Satellite and IP networks
As the world’s first H.264 4:2:2 10-bit Integrated
Receiver/Decoder supporting all profile from Main to
High422P, DR8400 is designed for contribution and
distribution markets where premium quality and
performance are more important than ever.
The DR8400 gives by default 3 different inputs type:
built-in DVB-S2 demodulator, IP Gigabit and ASI
with a TS bit rate up to 200Mbps. Combined with a
decoding bit rate reaching 62.5Mbps with no
compromise in CABAC, the DR8400 is addressing a
large spectrum of Primary Contribution applications.
By offering the first H.264 4:2:2 10-bit solution,
ATEME takes another technology step improving
Video Quality over 8-bit. DR8400 in combination
with CM4101 secures your Video Quality end to
end, completing the Video Quality chain from
Primary Contribution point to Distribution point.
KEY FEATURES
•
H.264 4:2:2 / 4:2:0 8-bit / 10-bit SD/ HD support
•
Built in RF demodulator
•
Pro MPEG FEC and BISS - 0/1/E support
•
MPEG-2 support
•
Upgradeable to 1080p60
BENEFITS
• No downscale in the Contribution chain.
• H.264 and DVB-S2 advantage to achieve up to 50%
bandwidth saving on contribution links.
• With legacy MPEG-2 support, the DR8400 gives
great flexibility on the field.
• DR8400 is upgradeable to 1080p60, providing the
best CAPEX reduction
Because Content Deploys Everywhere
www.ateme.com
DR8400
VIDEO DECODING
H.264 Profiles: MP, HP, H10P, H422P, H10IntraP
and H422IntraP.
- Decoding bit rate up to 62.5 Mbps
- 3:2 pull-down support
SD 576i and 480i
HD 1080p24, 1080i25 and 1080i30
HD 720p50 and 720p60
HD 1080p60
Aspect ratios: 4:3, 16:9
SD/HD MPEG-2 422P@ML /HL
AUDIO DECODING
PHYSICAL INTERFACE
Video and audio output:
3 BNC interfaces, 75 Ohm, configurable between:
- ASI output (ASI input loop through)
- SD-SDI
- HD-SDI
- 3G or dual-link SDI
HDMI 1.3 output
4 AES/EBU XLR, balanced 110 Ohm
Synchronization input: BNC 75 Ohm
Black-burst (SD mode)
Tri-level (HD mode)
Number of Audio Channels
SDI embedded or independent AES/EBU XLR
outputs.
Up to 4 pairs decoding
5.1 decoding to stereo pair down mix
EMBEDDED DVB DESCRAMBLING
BISS Mode-1
BISS-E
Audio Decoding
MPEG1 Layer II
MPEG2/MPEG4 AAC-LC
HE-AAC v1 & v2
Dolby E, AC3, AC3+ pass-through.
TRANSPORT STREAM INTERFACE
DVB-ASI Input:
2 independent inputs (redundancy)
BNC connector, 75 Ohm
TS bit-rate up to 200 Mbps
MPEGo IP Input*:
2 independent inputs ports for streaming
(redundancy)
Gigabit Ethernet ports (100/1000 Base-T RJ45
connectors)
De-jittering buffer size: 0-1 seconds
Encapsulation: UDP, RTP
Unicast/Multicast
SPTS/MPTS
TS bit-rate up to 200 Mbps
FEC ProMPEG CoP3r2 (SMPTE2022)
DVB-S/DVB-S2 Input:
Connector: F-type, 75 Ohm
L-Band input
Loop-through output
DVB-S:
- Constellation QPSK
- Symbol rate up to 45 MSps
- Viterbi and Reed-Solomon decoding
DVB-S2:
- Constellation QPSK, 8PSK
- Symbol rate range for QPSK up to 45 MSps
- Symbol rate range for 8PSK up to 37 MSps
- LDPC and BCH decoding
- Roll-Off: 0.35, 0.25, 0.20
Frequency Range: 950-2150 MHz (L-Band)
RF input level: -65 dBm to -25 dBm
TS bit-rate up to 108 Mbps
Because Content Deploys Everywhere
CONFIGURATION AND MANAGEMENT
SNMP (MIB v2c) with remote SNMP supervisor
Embedded web-server configuration
Front panel with LCD/keypad
ADVANCED POWER BLOCK
Fully internal redundant supply units with current
sharing for optimal MTBF.
Automatic single-sector configuration on any sector
input.
Sector inputs and internal supplies status available
from software.
PHYSICAL
Dimensions 19” 1-RU (482x445x 508 mm /19”x1.75”x
20”)
Weight 7.5 kg/16.5 lbs
ENVIRONMENTAL
Cooling air flow from front side to rear side.
Operating temperature 5 to 40 °C / +41 ° to +104 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non condensing)
Input voltage range 100-240 VAC, 50/60 Hz
Typical consumption 130 W
CERTIFICATIONS
ROHS
CE and FCC Class B Certifications, EMC Compliancy:
- EN 55022: 2006 classe A ,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2: 2005,
- EN 61000-3-3: 1995 / A1: 2001
Safety:
- IEC 60950-1: 2001
*Contact Factory for availability
www.ateme.com
LIVE
MEDIA
CM3101
Multi Format 4:2:0 AVC Encoder
H.264 HD/SD Encoder for Contribution
over Satellite and IP networks
ATEME’s Kyrion CM3101 is designed for
contribution and distribution markets where
premium quality and performance are more
important than ever.
Applying
the
latest
ATEME
compression
technology, the CM3101 includes support for H.264
4:2:0 at very low bit rate
CM3101 combined with DR8100 offers complete
H.264 contribution solution, providing the highest
possible level of video quality with vastly improved
bandwidth efficiency compared to legacy codecs.
CM3101 allows upgradeability from 4:2:0 SD up to
4:2:0/4:2:2 8-bit SD/HD with a simple license, a
future proof solution to protect your legacy decoder
investment.
Because Content Deploys Everywhere
KEY FEATURES
•
4:2:0 & 4:2:2 (8-bit only) support
•
SD and HD resolution
•
Very Low Latency Mode
•
FEC Pro MPEG and BISS - 0/1/E support
BENEFITS
•
Complete H.264 solution, when CM3101 used in
combination with the DR8100 or DR8400, allowing
higher video quality and best bandwidth efficiency
•
Very Low End-to-End Latency for Interview
contributions
•
Large operational bit rate range, CM3101 can
address Contribution over Satellite or IP
www.ateme.com
CM3101
VIDEO SPECIFICATIONS
Video Compression
Main SD/HD channel MPEG-4 AVC/H.264 - Main and
High Profile up to Level 4.
Upgradeable from SD 4:2:0 to SD/HD 4:2:2/4:2:0
Options:
- HD license.
- 4:2:2 license.
Video formats
HD: 1080i , 720p and 1080psf
SD: 576i and 480i
Input format detection
Encoding bit rate
SD: 0.5 to 30 Mbps, HD: 1 to 62.5Mbps
Resolutions
1080i x 1920, 1536, 1440, 1280 and 960 pixels
720p x 1280, 1024, 960 and 640 pixels
576i x 720, 576, 544, 480 and 352 pixels
480i x 720, 640, 576, 544, 480 and 352 pixels
Frame rates
1080i @ 25, 29.97, 30 Hz
1080p @ 23.97, 24, 25 Hz
720p @ 50, 59.94 and 60 Hz
576i @ 25 Hz, 480i @ 29.97 and 30 Hz
Video Processing
Fixed or adaptive configuration
Automatic I frame insertion
Automatic scene cut detection
Multi-pass look-ahead CBR and Capped VBR
Linear and nonlinear spatial filtering*
Inverse telecine (3:2 pull-down)
Logo insertion
Ancillary data and signaling
Closed captioning compliant with EIA-608, EIA-708,
SMPTE 334 and standard ATSC.
DVB Teletext/CEEFAX
Vchip parental control
VITC Time code
Wide Screen Signaling (WSS)
Active Format Description (AFD)
Digital Program Insertion (DPI)*
SCTE35 insertion via SCTE104 triggers or GPIO
Standard: MPEG-2 TS / DVB / ATSC/ ISDB
AUDIO SPECIFICATIONS
Number of Channels
Native Encoding up to 8 stereo pairs, 5.1 audio service
supports.
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E, AC.3/EAC.3 pass-through.
Dolby Digital Options*:
Dolby Digital E decode to AAC LC, AAC HEv1
or Dolby Digital AC.3/EAC.3 Encode
OUTPUT TRANSPORT LAYER
SPECIFICATIONS
MPEG-2 Transport Stream over UDP/IP or
RTP/UDP/IP
RTP/RTSP over UDP
Unicast / multicast streaming
MPEG-2 Transport Stream over DVB-ASI
ASI and IP streaming simultaneously
Options:
- FEC Pro MPEG CoP3r2 (SMPTE2022).
- BISS 0/1/E Encryption.
INPUTS / OUTPUTS INTERFACES
Video Input
HD-SDI (SMPTE292M)
SD-SDI (SMPTE 259M-C)
Audio Input:
Embedded in SD-SDI (up to 8 stereo channel pairs
SDI input)
AES-EBU input up to 8 stereo pairs or Analog input
up to 8 Audio balanced (-10 dBV to +20 dBV/600
ohms)
Output Interfaces
- 3 Gigabit Ethernet ports (100/1000 BaseT
connectors): 2 ports for service streaming, 1 port outof-band for management.
- 3 DVB-ASI outputs (75 Ohm BNC connector).
Discreet I/O*
Alarms and synchronizations triggered on GPIO DB-9
connector.
CONFIGURATION AND MANAGEMENT
DataMiner Networks Management System
SNMP (MIB v2c) with remote SNMP supervisor
Embedded web-server configuration
Front panel with LCD/keypad
PHYSICAL
Dimensions 19” 1-RU (482x44,5x 508 mm
/19”x1.75”x 20”)
Weight 7.5 kg/16.5 lbs
ENVIRONMENTAL
Cooling air flow from right side to left side
Operating temperature 5 to 40 °C / +41 ° to +104 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non condensing)
Input voltage range 100-240 VAC, 50/60 Hz
Typical consumption 80 W
CERTIFICATIONS
ROHS
CE and FCC class B Certifications, ECM Compliancy:
- EN 55022: 2006,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2 : 2005,
- EN 61000-3-3: 1995 / A1: 2001 / A2: 2005,
Safety:
- EN/UL/CA 60950-1
*Contact Factory for availability
Sampling frequency: 32, 44.1, 48 KHz
Because Content Deploys Everywhere
www.ateme.com
LIVE
MEDIA
AM2101
Multi Format AVC Encoder
H.264 HD/SD Encoder
For IPTV and Broadcast
The ATEME Kyrion® AM2101 is the Third
Generation High Definition (HD) MPEG-4/H.264
encoder targeting a broad range of DTV
applications. Its large operating scale - from 0.5 to
30 Mbps, with advanced Main and High Profile
encoding, allow bouquet aggregators, broadcasters,
and video service operators to reach their
audiences with a revolutionized picture quality.
Applying
the
latest
ATEME
compression
technology, the AM2101 is featuring the Ultra
Efficiency Mode enabling perfect HD below 6 Mbps
for IPTV services.
AM2101 is coming with advanced audio feature with
up to 8 pair stereo and option to encode Dolby
AC3/AC3+ or transcode Dolby digital E to Dolby
AC3/AC3+.
Kyrion® AM2101 is a fully programmable hardware
design offering a complete set of MPEG-4/H.264
tools including full support for interlaced video
(MBAFF). The Kyrion® encoder benefits from
ATEME’s MPEG-4 encoding expertise by enabling
state-of-the-art compression algorithms in real-time.
Because Content Deploys Everywhere
KEY FEATURES
•
SD or HD H.264 Encoder
•
SNMP control support
•
FEC Pro MPEG support
•
Ultra Efficiency mode for low bit rate Encoding
•
Dolby Digital E to AC3/AC3+ audio transcode.
BENEFITS
•
SD upgradeable HD encoder
•
Up to 8 Audio pairs with advanced Dolby audio
processing featuring Dolby E to AC3/AC3+
•
High quality HD encoding at sub 5 Mbps for IPTV
with the Ultra Efficiency mode
•
Integrated with DataMiner NMS solution for
redundancy
www.ateme.com
AM2101
VIDEO SPECIFICATIONS
Video Compression
Main stream SD/HD MPEG-4 AVC/H.264 - Main and
High Profile up to Level 4.
Options and License:
- Second stream for low resolution channel or
Picture in Picture.
- Ultra Efficiency Mode: Advanced encoding mode
allowing highest Video Quality, perfect in Ultra low Bit
rate encoding.
- HD License
Video formats
HD: 1080i, 720p and 1080psf
SD: 576i and 480i
Input format detection
Encoding bit rate
SD: 0.5 to 30 Mbps , HD: 1 to 30Mbps
Resolutions
1080i x 1920, 1536, 1440, 1280 and 960 pixels
720p x 1280, 1024, 960 and 640 pixels
576i x 720, 576, 544, 480 and 352 pixels
480i x 720, 640, 576, 544, 480 and 352 pixels
Frame rates
1080i @ 25, 29.97, 30 Hz, 1080p @ 23.97, 24, 25 Hz
720p @ 50, 59.94 and 60 Hz
576i @ 25 Hz, 480i @ 29.97 and 30 Hz
Picture in Picture or Low resolution
Resolutions: 288x352, 240x352, 144x176, 120x176,
96x128, 96x96.
OUTPUT TRANSPORT LAYER
SPECIFICATIONS
MPEG-2 Transport Stream over UDP/IP or
RTP/UDP/IP
RTP/RTSP over UDP
Unicast / multicast streaming
Up to 4 multi network streams
MPEG-2 Transport Stream over DVB-ASI
ASI and IP streaming simultaneously
Option: FEC Pro MPEG CoP3r2 (SMPTE2022)
INPUTS / OUTPUTS INTERFACES
Video Input
HD-SDI (SMPTE292M)
SD-SDI (SMPTE 259M-C)
Audio Input
Embedded in SD-SDI (up to 8 stereo channel pairs
SDI input)
Audio Options:
- AES-EBU input up to 8 stereo pairs.
- Analog input up to 16 Audio balanced (-10 dBV to
+20 dBV/600 ohms)
Output Interfaces
- 3 Gigabit Ethernet ports (100/1000 BaseT
connectors): 2 ports for service streaming, 1 port outof-band for management.
- 3 DVB-ASI outputs (75 Ohm BNC connector).
Discreet I/O*
Alarms and synchronization on GPIO DB-9
connector.
CONFIGURATION AND MANAGEMENT
Video Processing
Fixed or adaptive configuration
Automatic I frame insertion
Automatic scene cut detection
Multi-pass look-ahead CBR and Capped VBR
Linear and nonlinear spatial filtering*
Inverse telecine (3:2 pull-down)
Logo insertion
Ancillary data signaling
Closed captioning compliant with EIA-608, EIA-708,
SMPTE 334 and standard ATSC.
DVB Teletext/CEEFAX
Vchip parental control
VITC Time code
Wide Screen Signaling (WSS)
Active Format Description (AFD)
DataMiner Networks Management System
SNMP (MIB v2c) with remote SNMP supervisor
Embedded web-server configuration
Front panel with LCD/keypad
PHYSICAL
Dimensions 19” 1-RU (482x44,5x 508 mm
/19”x1.75”x 20”)
Weight 7.5 kg/16.5 lbs
ENVIRONMENTAL
Cooling air flow from right side to left side
Operating temperature 5 to 40 °C / +41 ° to +104 °F
Storage temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non condensing)
Input voltage range 100-240 VAC, 50/60 Hz
Typical consumption 80 W
Digital Program Insertion (DPI)*
SCTE35 insertion via SCTE104 triggers or GPIO
Standard: MPEG-2 TS / DVB / ATSC/ ISDB
AUDIO SPECIFICATIONS
Number of Channels
Native Encoding up to 8 stereo pairs, 5.1 audio service
supports.
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E, AC.3/EAC.3 pass-through.
Dolby Digital Options*:
Dolby AC.3/EAC.3 Encode
Dolby E decode to AAC LC, AAC HEv1 or
Dolby AC.3/EAC.3 Encode
Sampling frequency: 32, 44.1, 48 KHz
Because Content Deploys Everywhere
CERTIFICATIONS
ROHS
CE and FCC class B Certifications, ECM Compliancy:
- EN 55022: 2006,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2 : 2005,
- EN 61000-3-3: 1995 / A1 : 2001 / A2 : 2005,
Safety :
- EN/UL/CA 60950-1
*Contact Factory for availability
www.ateme.com
LIVE
MEDIA
AS2204
Multi Channel
Standard Definition AVC Encoder
Quad SD H.264 Encoder for IPTV and Broadcast
The ATEME Kyrion® AS2204 is a multi-channel
MPEG-4/H.264 encoder enabling IPTV and
Broadcast applications. With support for four
channels in a single 19” rack unit, the Kyrion
AS2204 allows video service operators to deploy
hundreds of SD channels within a modest footprint.
Applying
the
latest
ATEME
compression
technology, The Kyrion AS2204 produces
bandwidth efficient SD streams delivering greater
customer reach in IPTV networks and optimizing
your Bandwidth in Broadcast making the most of
your Networks investments.
The AS2204 supports a second stream for picturein-picture (PIP) used for mosaic applications, or low
resolution format used for convergence application
to Mobile TV or Internet TV.
Kyrion AS2204 is a fully programmable hardware
design offering a complete set of MPEG-4/H.264
tools including full support for interlaced video
(MBAFF). The Kyrion encoder benefits from
ATEME’s MPEG-4 encoding expertise by enabling
state-of-the-art compression algorithms in real-time.
Because Content Deploys Everywhere
KEY FEATURES
•
4 SD channels MPEG-4 AVC / H.264 in 1 RU
•
PiP or low resolution service for each channel.
•
MPEG-2 TS over UDP or RTP
•
Optional Analog video/audio inputs
BENEFITS
•
Compact solution for lower video head end footprint
and lower consumption
•
Multi-channel video encoder to increase customer
reach and to address applications from Broadcast,
IPTV to Mobile TV
•
Integrated with
redundancy
DataMiner
NMS
solution
www.ateme.com
for
AS2204
VIDEO SPECIFICATIONS
Video Compression
4 independent SD channels MPEG-4 AVC/H.264 Main and High Profile up to Level 3.
Options and License:
- Second stream for low resolution channel or
Picture in Picture on each channel.
Video formats
SD: 576i and 480i
Encoding bit rate
SD: 0.5 to 10 Mbps per channel.
Resolutions
576i x 720, 576, 544, 480 and 352 pixels
480i x 720, 640, 576, 544, 480 and 352 pixels
Frame rates
576i @ 25 Hz, 480i @ 29.97 and 30 Hz
Picture in Picture or Low resolution
Resolutions: 288x352, 240x352, 144x176, 120x176,
96x128, 96x96.
Video Processing
Fixed or adaptive configuration
Automatic I frame insertion
Automatic scene cut detection
Multi-pass look-ahead CBR and Capped VBR
Linear and nonlinear spatial filtering*
Inverse telecine (3:2 pull-down)
Logo insertion
INPUTS / OUTPUTS INTERFACES
Video Input
4 SD-SDI (SMPTE 259M-C)
Option :
4 analogue video inputs composite or component.
Audio Input:
Embedded in SD-SDI (up to 8 stereo channel pairs
SDI input)
Options:
- AES-EBU input up to 8 stereo pairs.
- Analog input up to 16 Audio balanced (-10 dBV to
+20 dBV/600 ohms)
Output Interfaces
- 4 Gigabit Ethernet ports (100/1000 BaseT
connectors): 2 ports for service streaming, 2 port outof-band for management.
Discreet I/O*
Alarms and synchronization triggered on GPIO DB-9
connector.
CONFIGURATION AND MANAGEMENT
- DataMiner Networks Management System
- SNMP (MIB v2c) with remote SNMP supervisor
- Embedded web-server configuration
- Front panel with live video “On screen Display” to
monitor the 4 video input.
PHYSICAL
Dimensions 19” 1-RU (482x44,5x 508 mm
/19”x1.75”x 20”)
Weight 7.5 kg/16.5 lbs
Ancillary data and signaling
Closed captioning compliant with EIA-608, SMPTE
334 and standard ATSC.
DVB Teletext/CEEFAX
Vchip parental control
VITC Time code
Wide Screen Signaling (WSS)
Active Format Description (AFD)
Digital Program Insertion (DPI)*
SCTE35 insertion via SCTE104 triggers or GPIO
Standard: MPEG-2 TS / DVB / ATSC/ ISDB
AUDIO SPECIFICATIONS
Number of Channels
Native Encoding up to 8 stereo pairs.
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC (optional)
Dolby Digital E, AC.3/EAC.3 pass-through.
ENVIRONMENTAL
- Cooling air flow from right side to left side
- Operating temperature 5 to 40 °C / +41 ° to +104 °F
- Storage temperature -20 to 70 °C / +32° to +158 °F
- Operating humidity 5 to 90% (non condensing)
- Input voltage range 100-240 VAC, 50/60 Hz
- Typical consumption 80 W
CERTIFICATIONS
ROHS
CE and FCC class B Certifications, ECM Compliancy:
- EN 55022: 2006,
- EN 55024: 1998 / A1 : 2001 / A2 : 2003,
- FCC PART 15 Class B: 2006,
- EN 61000-3-2: 2000 / A2 : 2005,
- EN 61000-3-3: 1995 / A1 : 2001 / A2 : 2005,
Safety:
- EN/UL/CA 60950-1
*Contact Factory for availability
Sampling frequency: 32, 44.1, 48 KHz
OUTPUT TRANSPORT LAYER
SPECIFICATIONS
MPEG-2 Transport Stream over UDP/IP or
RTP/UDP/IP
RTP/RTSP over UDP
Unicast / multicast streaming
Because Content Deploys Everywhere
www.ateme.com
LIVE
MEDIA
DR 8100
Multi-Format Receiver/Decoder
MPEG-2/H.264 HD and SD
Decoder for IPTV and Contribution
Aimed at both IPTV and contribution markets, the
DR8100 is a professional receiver/decoder for HD
and SD video compressed with MPEG-2 and H.264.
The DR8100 meets industry requirements for
satellite, telco, and terrestrial networks. Built upon a
highly
flexible,
scalable,
and
future-proof
architecture, multiple slots are available to host
interface boards that best fit your specific
application.
The DR8100 is available in a single channel
configuration for receiving H.264 video for
contribution applications or in a multi-channel
configuration for space-critical applications such as
MPEG-2 to H.264 conversion for IPTV.
Designed to match with Kyrion® MPEG-4/H.264
encoders, the DR8100 ensures that you will benefit
from the latest advances in compression
technology, delivering new contribution links at
reduced bandwidths and lower latencies.
The widely deployed DR8100 guarantees
interoperability with numerous CAS systems. In
order to ensure success in executing complex
operations, the DR8100 provides full control
through SNMP. With NMS (Network Management
System) redundancy management, the DR8100 is a
key component of ATEME’s complete head-end
solution.
Because Content Deploys Everywhere
KEY FEATURES
•
4:2:0 MPEG-4/H.264 and MPEG-2 decoding
•
SD and HD resolution
•
Descrambling with CAS support and BISS
decryption
•
Extensive input interface range, including IP
with FEC, ASI, DVB-S/S2, COFDM DVB-T,
QAM
BENEFITS
•
Facilitates transition towards H.264 for IPTV
head end,with MPEG-2 support
•
Integrated with DataMiner NMS solution for
redundancy management
•
Pairing with Kyrion H.264 encoders to achieve
high quality H.264 contribution links
www.ateme.com
DR 8100
CHASSIS
Video decoding
MPEG-4 H.264 ISO/IEC 14496-10 MP@L4.1 / HP@L4.0
up to 80 Mbps
MPEG-2 ISO/IEC 13818-2 - 4:2:0 MP@ML/HL up to 30
Mbps
Max TS input datarate 160 Mbps
Genlock input: analog SD Hsync (BlackBurst) / Tri-Level –
optional
Video processing
Display modes: Full, letterbox, cropped, anamorphic, AFD
Aspect ratio control: 4:3, 16:9 (selectable)
Down conversion / Cross conversion selectable
OSD: Closed caption, service info, SI, EPG (selectable)
Audio decoding
Dolby Digital AC3, MPEG layer 1 and 2, Linear PCM,
MPEG-2/4 AAC-LC/HE ADTS & LOAS, Dolby E
Downmix (selectable): Lo/Ro (Stereo), Lt/Rt (Surround),
Dual Mono, Dual Left, Dual Right
Conditional Access
Dual DVB-CI CAM slots and BISS 1 & E decryption
System management - local and remote
SNMP, web pages, front panel LCD with keypad
In the fi eld upgradeability through the web-server
interface (for maintenance release &
evolutions/enhancements)
OUTPUTS
HD video output
Connectors: 2 x HD-SDI (BNC, 75 Ohms) - SMPTE 292M
/ 274M / 296M
+ 1 analog component RGB/YPbPr (HD15)
Supported resolutions
1080i @ 25 Hz, 29.9 7 Hz, 30 Hz
1080p à 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz
720p @ 50 Hz, 59.94 Hz, 60 Hz
480i @ 29.9 5Hz / 480p @ 59.94 Hz
576i @ 25 Hz
Embedded audio SMPTE 299M
SD video output
Connectors: 2 x SD-SDI (BNC, 75 Ohms) - SMPTE 259M
+ 1 composite video (BNC, 75 Ohms)
Supported resolutions
480i @ 29.9 5Hz / 480p @ 59.94 Hz
576i @ 25 Hz
Closed caption: embedded - EIA-708B or EIA-608B
Line 21 - enable / disable (selectable)
DVB Teletext; VBI/VANC, EN 301775
SCTE35 to SCTE104 messaging (in Vanc)
MPEG over IP input
Connectors: 1 x RJ45 + 1 x SFP port
10/100/1000 BaseT auto-negociation
UDP or RTP multicasts and unicasts
FEC: Pro-MPEG CoP3
IGMP compatibility: version 1, 2, and 3
8VSB/QAM 64&256 Receiver/Demod
Standards: ATSC A/53E (8-VSB) and ITU-T,
Annex B (SCTE DVS-031) (QAM)
Connectors: 1x F-type 75 Ohms
Frequency range: 50-850 MHz
UHF/VHF chan 2-69, Cable chan 2-134 (FCC cable, IRC,
HRC)
Sensitivity: –25 dBmV
Dynamic range: > 40 dB
DVB-S/S2 Receiver/Demod
Standards: EN 300 421 (DVB-S), EN 302 307 (DVB-S2)
Connectors: 2 x BNC 75 Ohms
Modulation: DVB-S QPSK, DVB-S2 QPSK/8PSK
Frequency range: L band 950–2150 MHz, KU band or Cband
Symbol rate: 1-45 MSym/s (DVB-S), 1-30 MSym/s (DVBS2)
RF input level: -25 dBm to -65 dBm
DVB-S FEC: 1/2, 2/3, 3/4, 5/6, 7/8
DVB-S2 FEC: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 (QPSK)
3/5, 2/3, 3/4, 5/6, 8/9, 9/10 (8PSK)
DVB-T/COFDM Receiver/Demod
Standard: EN 300 744
Connectors: 2 x BNC 75 Ohms
Modulation: QPSK, QAM16, QAM64
Guard interval: 1/4, 1/8, 1/16, 1/32
Frequency range: 49 MHz – 861 MHz,
Channel bandwidth: 6, 7, 8 MHz
PHYSICAL
Dimensions 19” 1-RU (482 x 44,5 x 530 mm / 19” x 1.75” x
21”)
Weight 4.3 to 6.4kg / 8.6 to 12.8 lbs
ENVIRONMENTAL
Operating temperature 5˚ to 45˚C / 41°to113°F
Storage temperature -20 to 70 °C / -4° to +158 °F
Operating humidity 5 to 90% (non condensing)
Electrical compliance EN, FCC, UL
Input voltage 100-240 VAC , 50/60 Hz
Power consumption typical 45 W, max 70 W
ORDERING INFORMATION
DR8100-1HD-MP4-CI-xx
MPEG-2/4 HD decoder with CAM module
DR8100-2SD-MP4-CI-xx
Dual channel MPEG-2/4 SD decoder with CAM module
Audio output
DR8100-1HD-MP4G-ASI-yy
2 services supported, independent from embedded
Supported formats - selectable
Uncompressed IEC-60958 (Decoded / Downmix)
Compressed IEC-61937 (Passthrough)
PCM Downmix
MPEG-2/4 HD/SD decoder with genlock, ASI and IP or
DVBS2 interface,
Pro MPEG FEC
INPUTS
ASI/S-310M input/output
Standards: EN50083-9 (V2:3/98) DVB-ASI, SMPTE 310M
Connectors: 2 x BNC 75 Ohms
TS input rate: max 160 Mbps (ASI) - 19.39 Mbps (S-310M)
Packets size: 188/204 byte
Because Content Deploys Everywhere
DR8100-1SD-MP4G-ASI-yy
MPEG-2/4 SD decoder with genlock, ASI and IP or
DVBS2 interface, Pro MPEG FEC
xx = DVBS2, DVBT or QAM input interfaces
yy = IP or DVBS2 for IP or Satellite contribution,
options for BISS decryption, AES/EBU outputs,
www.ateme.com
MC3000 / MC3100
Professional Multiplexer – A turnkey head-end solution
Paris - Los Angeles - Montreal - Tokyo - Hangzhou - Hong Kong
Contact us: sales@ateme.com
www.ateme.com
MC3000 / MC3100
Professional Multiplexer – A turnkey head-end solution
Product Briefing
Powerful Multiplexing Simplified
ATEME’s MC3000/MC3100 multiplexer is the simplest, most powerful Digital cable solution for operators launching or
expanding ther digital service offering.
The MC3000/MC3100 advanced multiplex software simplifies engineer’s deployment and operational routines. Developed
specifically for digital cable operators, the multiplexer performs full analysis of source PSI/SI and PSIP tables, with
automatic regeneration of all tables as required, up to a maximum 250 Multiplexes.
ATEME’s presents a high performance QAM output module for direct insertion of digital services into the cable network.
Based on a full digital-modulation and upconversion architecture, the QAM Output module delivers a clearer signal, and
makes future upgrades easier.
Central Head-end
Ease of configuration makes the MC3000/MC3100 the ideal solution for deployments requiring aggregation of services
from multiple sources, service processing and preparation for QAM broadcast over cable networks.
Remote Head-end
With IP, DVB-T or ASI Input sources, powerful edge processing capabilities, high density QAM output alongside decoder
options for analog simulcast, operators can deliver all broadcast services via a common platform.
Contribution
High throughput ASI feeds, multiplexing functionality, and an easy to use user interface make dynamic service adjustments
possible.
Regional adaptation
For insertion of local programming at regional broadcast locations, the MC3000/MC3100 is a powerful, space efficient
solution. Transparent mode enables direct transport stream forwarding for network conversion applications.
Resilience is built into the ATEME architecture. MC3000 modules are hot-swappable, including power supplies and fans
and the ‘Always On’ Redundancy solution offers full or partial redundancy for a variety of failure scenarios.
Application
The combination of a wide range of input interfaces, descrambling, re-scrambling and advanced re-multiplexing functionality
makes the MC3000/MC3100 ideal for new and existing cable, terrestrial and satellite operators. The MC3000/MC3100 can
be seamlessly integrated with existing head-end solutions or used as a regional multiplexer. Via the SNMP Alarm MIB and
SOAP/XML interface the multiplexer can be integrated into existing management systems.
The MC3000/MC3100 is also suitable for contribution links where multiplexing of services is required.
Because Content Deploys Everywhere
Chassis
Chassis
4RU
• Modular configuration with up to 16+2
board positions
• WEB based configuration, SNMP Alarms,
SOAP/XML interface
• Forced air-cooling (through back of 4RU)
• Dual redundant hot-swappable 300 W
power supply
• 4 individually monitored hot-swappable
fans
• Hot-swappable modules
1RU
• Modular configuration with up to 9+1
board positions
• WEB based configuration, SNMP Alarms,
SOAP/XML interface
• Forced air-cooling (through sides of 1RU)
• Swappable modules in back
• Optional IP IO in front
SWITCH
Appear TV
mc 3ooo
MC3000
~ 100-240 VAC
4.1A 50-60Hz
Fuse: T5A H 250V
CAUTION: DOUBLE POLE/
NEUTRAL FUSING
Apparaten skall anslutas
til jodat nätuttag
Front View
Appear TV
Switch Module *SC/SWM (product code)
• Gbit/s routing between modules
in a chassis
• 1 slot wide (4RU switch module must be
placed in slot 0. Redundant module
in slot 17)
DC 1100
Appear TV
mc 3100
DC 1100
Rear View
Slot #3
Slot #5
Slot #7
Slot #2
Slot #4
Slot #6
Input Modules (*Product Codes)
Ethernet Input w/Management
•
•
•
•
•
•
•
•
•
DVB-T Input w/Management
GB IP-IO
10/100/1000BaseT input card (RJ45)
Mini-GBIC interface (SFP) for optical input
Supports UDP/RTP Multicast/Unicast reception
Supports reception of MPTS and SPTS
Service filtering
PCR regeneration
10/100/1000BaseT management port (RJ45)
Enables WEB management
1 slot wide.
Status
1000 base-x
10/100/1000
base-T
Control
*MC/GBIPIN-MMI
DVB-S/S2 Input w/Management
•
•
•
•
•
•
•
•
•
•
•
COFDM INPUT
CONTROL
4xCOFDM inputs
F connector
1/2, 2/3, 3/4, 5/6, 7/8 FEC
2k and 8k carrier mode
QPSK, 16QAM, 64QAM modulation
Supports reception of MPTS and SPTS
Service filtering
ASI Monitoring port
10/100/1000BaseT management port (RJ45)
Enables WEB management
2 slots wide
Status
ASI Monitor
COFDM
Quad Input
Control
*MC/4COFDMI-MMI
ASI Input w/Management
ASI OUT
DVB-S/S2 INPUT
CONTROL
•
•
•
•
•
•
•
•
•
•
•
•
4xDVB-S/S2 inputs
F connectors
DVB-S, DVB-S2 QPSK and 8PSK modes
950 – 2150 MHz Frequency Range
1-45 MSym/s (mode dependent)
1/2, 2/3, 3/4, 5/6, 7/8, 8/9, 9/10 FEC
(mode dependent)
Supports reception of MPTS and SPTS
Service filtering
ASI Monitoring port
10/100/1000BaseT management port (RJ45)
Enables WEB management
2 slots wide
Status
RF In
A
ASI Monitor
B
C
•
•
•
•
•
•
•
•
3xASI input
BNC connectors
213 Mbit/s per input
Supports reception of MPTS and SPTS
Service filtering
10/100/1000BaseT management port (RJ45)
Enables WEB management
1 slot wide
Status
A
B
C
D
D
Control
*MC/4DVBS-MMI
*MC/4DVBSS2-MMI
*MC/3ASI-MMI
DVB-C Input w/Management
QAM INPUT
CONTROL
•
•
•
•
•
•
•
•
•
4xQAM inputs
F connector
0.87-6.9 Ms/s
Supports reception of MPTS and SPTS
Service filtering
ASI Monitoring port
10/100/1000BaseT management port (RJ45)
Enables WEB management
2 slots wide
Status
ASI Monitor
QAM
Quad Input
Control
*MC/4QAM-MMI
Paris - Los Angeles - Montreal - Tokyo - Hangzhou - Hong Kong
Contact us: sales@ateme.com
www.ateme.com
Processing Modules (*Product Codes)
Descrambler
DESCRAMBLER
CA
• DVB CA compliant scrambling (CSA) and
AES compliant scrambling
• Scrambles up to 250 services, maximum
850 Mbit/s
• Supports partial scrambling and PVR
• Support scrambling of MPEG-2 and H264 in
SD &HD
• DVB Simulcrypt compliant
• 10/100/1000BaseT IP interface towards CA
system (RJ45)
• Handles up to 250 ECM’s
• 1 slots wide
CA
• 2xDVB Common interface
• Descrambling of 10 services per CAM
(depends on common interface)
• Support for all major CA systems
and CAMS
• 1 slot wide
Scrambling
A B
Status
SCS
*DVB Scrambler with SCS, MC/DVBMCSXX
*DVB Scrambler with SCS, MC/AESMCSXX
*MC/2CI
Output Modules (*Product Codes)
Ethernet Output
GB IP-IO
• 10/100/1000BaseT input card (RJ45)
• Mini-GBIC interface (SFP) for optical input
• Supports UDP/RTP Multicast/Unicast
transmission
• Supports multiple of output cards
• Streaming of up to 850 Mbit/s
• Maximum 250 service per output card
• Supports streaming of SPTS
• Support streaming of MPTS with
Multiplexing (optional)
• PSI/SI regeneration
• PCR regeneration
*MC/GBIPOUT
• 1 slot wide.
Decoder w/ Composite video
and analogue audio
Status
1000 base-x
10/100/1000
base-T
Control
•
•
•
•
•
•
•
•
•
•
QAM OUTPUT
8 QAM outputs, 4 and 4 paired
Full digital modulation and up-conversion
DOCSIS 3.0 RF compliant
32 / 64 / 128 / 256 QAM modulation
Frequency range of 50 – 850 MHz
Supports multiplexing and transparent pass
through
PSI/SI regeneration
F connector for RF output
External mute of RF output
2 slot wide
Status
Video
A
B
Audio
•
•
•
•
•
•
•
•
Because Content Deploys Everywhere
Data In
ASI OUT
Status
A
B
C
D
*MC/4ASIOUTMX
DUAL
DECODER
Please note that card ejector
Video
Status
*MC/DDBBCI
Data Out
4xASI outputs
BNC connectors
213 Mbit/s per output
4 Different multiplexed outputs
Maximum 250 services per card
PSI/SI regeneration
PCR regeneration
1 slot wide
CA
will not be mounted for
A
B
Audio
• 2 decoders per module
• MPEG-2 DVB 4:2:0 MP@ML decoding
• VBI re-insertion (WSS, WST/EBU Teletext, VPS,
VITS)
• DVB and EBU subtitling
• AES descrambling (option)
• 2 DVB Common Interfaces. One per channel
• Composite PAL Video output – BNC connectors
• Balanced Stereo Audio output – Five poles XLR
connectors
• 2 slots wide
Mute
RF
OUT
ASI output
*MC/DDBB
Decoder w/ Composite video, analogue
audio and Common Interface
Status
*MC/8QAMOUTMX
DUAL
DECODER
• 2 decoders per module
• MPEG-2 DVB 4:2:0 MP@ML decoding
• VBI re-insertion (WSS, WST/EBU, VPS, Teletext
Subtitling, VITS)
• DVB and teletext subtitling
• AES descrambling (option)
• Composite PAL Video output – BNC connectors
• Balanced Stereo Audio output – D-sub
connector
• 1 slot wide
QAM output
A
A B
B
modules installed in 1RU
chassis. Modules mounted in
front of 1 RU chassis are not
hot-swappable.
Input Interface Specifications
IP input
Interface
PCR de-jittering : 10/100/1000 Base-T Ethernet
and SFP interface
: Up to 850 MBit/s
: UDP Multicast/Unicast, RTP
: SPTS and MPTS
: Yes
Connector
Number of inputs per module
Maximum bit-rate per port
Management
: BNC female, 75Ω
:3
: up to 213.7Mbit/s
: 10/100/1000 Base-T Ethernet
Connector
Number of inputs per module
Decoding
Symbol rate DVB-S
Symbol rate DVB-S2
FEC DVB-S
FEC DVB-S2 QPSK
FEC DVB-S2 8PSK
DVB-S2 FEC Frames:
Input level
Frequency range
LNB voltage
Maximum LNB supply current
LNB signaling
Management
: F female, 75Ω
:4
: LDPC and BCH
: 1-45 MSym/s
5–30 MSym/s
: 1/2, 2/3, 3/4, 5/6, 7/8
: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10
: 3/5, 2/3, 3/4, 5/6, 8/9, 9/10
: Normal Frames
: -25 to -70 dBm
: 950-2150 MHz
: 0/13/18 Volt
: 400 mA
Connector
Number of inputs per module
Input level
Frequency range
Channel bandwidth
Guard interval
Carrier mode
Hierarchy stream
Hierarchy mode
Carrier modulation
FEC rate
FEC
: F female, 75Ω
: 4 demodulators (one connector)
: -20 to -65 dBm
: 49 – 861 MHz (center frequency)
: 7 and 8 MHz (6 MHz optional)
: 1/4, 1/8, 1/16, 1/32
: 2k, 8k
: High and low priority
: All
: QPSK, 16QAM, 64QAM
: 1/2. 2/3, 3/4, 5/6, 7/8
: Reed Solomon & Viterbi
Fully compliand with ETS 300 744 and
NorDig 2 specifications
: Non-inverted and inverted
: 10/100/1000 Base-T Ethernet
Maximum data rate
Data format
Transport stream
ASI input
(EN 50083-9)
DVB-S/S2 input
(EN 300 421, EN 302 307)
DVB-T input
(EN 300 744)
Spectrum
Management
DVB-C input
(EN 300 429)
Connector
Number of inputs per module
Frequency range
Channel bandwidth
QAM Mode
Symbol rate
FEC
Spectrum
Management
: LNB voltage + 22kHz continuous tone
: 10/100/1000 Base-T Ethernet
: F female, 75Ω
: 4 demodulators (one connector)
: 51 – 858 MHz (center frequency)
: 7 and 8 MHz (6 MHz optional)
: 4, 16, 32, 64, 128, 256 QAM
: 0.87-6.9 Mbaud
: ITU-T J83 annex A, B and C
And ETS 300 429
: Non-inverted and inverted
: 10/100/1000 Base-T Ethernet
Paris - Los Angeles - Montreal - Tokyo - Hangzhou - Hong Kong
Contact us: sales@ateme.com
www.ateme.com
Descrambling Specifications
DVB Descrambling
AES Descrambling
Interface
CA System Support*
Number of services per CAM
: DVB Common Interface
: BetaCrypt, Conax, Cryptoworks, Irdeto,
Mediaguard, Viaccess, NDS Viasat,
(Nagra in progress)
: 10 (requires multi service CAM)
Interface
CA System Support
: Virtual smartcard
: Please contact Appear TV
* Appear TV aim to integrate with all major CA providers. Please contact Appear TV for an updated list over integrated CA systems.
Scrambling Specifications
Scrambling
Scrambling algorithm
Maximum data rate
Number of services per scrambler card
Video format
Scrambling mode
CA Interface
Interface towards CA System
Number of CA systems
EMM
Entropy reduction
: DVB-CA and AES
: Up to 850 MBit/s
: 250 (depending on SW license)
: Transport stream, MPEG-2 SD/HD
and MPEG-4 SD/HD.
: Supports partial scrambling and PVR*
: Simulcrypt interface
: 4 simultaneously CA systems
: Yes
: Yes for DVB
No for AES
* PVR functionality supported will depend on integration with CA provider. Please contact Appear TV for more information.
Processing Specifications
PSI/SI
PSIP
Multiplexing
Function
Pass-through of scrambled services
PSI/SI handling
Tables Supported
: Full regeneration based on input and
operations performed on the signal.
: Yes, on TS level.
: Automatically regenerated.
: PAT, PMT, CAT, SDT, NIT
Function
Pass-through of scrambled services
PSI/SI handling
Tables supported
: PSIP input analysis,
: Yes, on TS level. For SPTS output only
: Automatically regenerated.
: PAT, PMT, CAT, SDT, NIT, EIT p/f, TDT, TOT
Supported on
Video format
: ASI output (standard) and IP output (option)
: Transport stream, MPEG-2 SD/HD
and MPEG-4 SD/HD.
Because Content Deploys Everywhere
Output Specifications
IP Output
Interface
Maximum data rate
Maximum number of services
Data format
Video format
PCR Regeneration
Multiplexing
ASI Output
Connectors
Number of outputs per module
Maximum bit-rate per port
Transport stream output
Number of services per card
Output format
PCR Regeneration
Multiplexing
QAM Output
Interface
Number of QAM frequencies per module
Number of services per card
Multiplexing
Transparent pass-through
Modulation
Symbol rate
Frequency range
Frequency step size
Frequency Stability
Output level with 8 carriers on.
Output level adjustment step size (GUI)
PCR Regeneration
: 10/100/1000 Base-T Ethernet output
and SFP interface
: Up to 850 MBit/s *
: 250
: UDP Multicast/Unicast, RTP
: Transport stream, MPEG-2 SD/HD
and MPEG-4 SD/HD
: Yes, According to EN50083_9
: Yes (Option)
: 4 BNC female, 75Ω
: 4 Different Transport Streams
: up to 213 Mbit/s Burst mode
up to 72 Mbit/s Spread mode
: SPTS and MPTS
: 250 (sum of all 4 ports)
: Constant bit-rate
: Yes, According to EN50083_9
: Yes, per port
: F connector female, 75Ω
: 8 Different MPTS according to EN 300 429
: 250 services (sum of all 8 ports)
: Yes, per port
: Yes, per port
: 32 / 64 / 128 / 256 - QAM
: 4,48 to 7.00 Mbaud
: 50 – 850 MHz
: 12,5 kHz
: 5 ppm
: 100 to 110 dBµV per carrier
: 0,5 dB
: Yes, According to EN50083_9
Video and audio Monitoring
Video Output
Audio Output
Connector
Video standards
Decoding
VBI Insertion
Subtitling
: BNC female, 75Ohm
: PAL and SECAM *
: MPEG-2 MP@ML (max. bit rate 15Mbits/s)
: Teletext (WST/EBU), WSS, VPS, VITS
: DVB and EBU
Number of stereo outputs per video
Connector
Decoding of the following formats is supported
:1
: Mini-XLR or D-SUB (depends on module)
: MPEG-1 layers 1 and 2 (Musicam)
MPEG-2 layer 2
* For a list on implemented standards, please
contact Appear TV
Paris - Los Angeles - Montreal - Tokyo - Hangzhou - Hong Kong
Contact us: sales@ateme.com
www.ateme.com
Environmental Specifications
Conditions
Power
Operational temperature
Operational humidity
Storage temperature
Storage humidity
: 0ºC to +40 ºC
: 0% to 95% (non-condensing)
: -20ºC to +70 ºC
: 5% to 95% (non-condensing)
AC Power 4RU and 1RU
DC Power 4RU
: Input voltage 110V/240V, 50/60 Hz
: Input voltage -35 to -75 V DC, F250 16A fuse
: 300W each, T250V 5A fuse
: 360W each*
: Power supplies are monitored from GUI and
via LEDs on chassis
: Hot-swappable, mounted on opposite side of
input/output Modules
: 1 or optionally 2 (not possible to combine AC
and DC)
: 200W, T250V 4A fuse
:1
AC Power supply rating 4 RU chassis
DC Power supply rating 4 RU chassis
Control 4RU chassis
Mounting 4RU chassis
Number of power supplies 4RU chassis
Power supply rating 1RU chassis
Number of power supplies 1RU Chassis
Mounting 1RU chassis
*DC Power sold before Q2 2009 is 300
Fans
Cooling 4RU chassis
Number of fans 4RU chassis
Control 4RU chassis
Cooling 1RU chassis
: Internally mounted
: Hot-swappable fans. (airflow front-to-back)
:4
: Fans are monitored from GUI and via
LEDs on chassis
: Integrated fans (airflow right to left side)
:6
Number of fans 1RU chassis
Physical
Dimensions 4RU chassis
Mounting options 4RU chassis
Dimensions 1RU chassis
Mounting options 1RU chassis
: 19” x 4RU
: Telco – cable in front
Broadcast style – cable in back
: 19” x 1RU
: Broadcast style – cable in back and front
Specifications and product availability are subject to change without notice.
ATEME worldwide
ATEME worldwide offices
Sales Offices
EMEA and Headquarters
Regional offices
ATEME S.A.
26 Burospace
91573 Bievres Cedex
FRANCE
Los Angeles
Montreal
Tokyo
Hong Kong
Hangzhou (China)
Leeds (UK)
Tel: +33 1 69 35 89 89
Fax: +33 1 60 19 13 95
Email: sales@ateme.com
Because Content Deploys Everywhere
ON DEMAND
MEDIA
File Encoder 2
Multi Format File-Based Transcoding Solution
Produce High Quality Video
Enhance Existing Workflow
Reach New Audiences
Kyrion® File Encoder 2 is a multi-codec/multi-format
file-based processing solution producing high
bandwidth efficient content for delivery to Television,
Mobile and Internet. Kyrion File Encoder is able to
process multiple audio tracks associated with DVB
subtitling and Closed Captioning enabling
broadcasters and operators to feed their On
Demand catalogue with a wide variety of content.
Full Interoperability
Kyrion File Encoder includes
ATEME’s MP4/Transport Stream output muxers,
interoperable various Set Top Boxes, Streaming
Servers and handheld devices. Full control of these
muxers gives the user the capability to ingest Kyrion
File Encoder MPEG-2 & H.264 streams into any On
Demand systems built upon Conditional Access
Services, Digital Rights Management, VOD Servers,
transport layer and decoders such as Adobe®
Flash® Media Player.
Multi level Automation / Workflow Capability
Kyrion File Encoder offers multi-level 24/7
automation and workflow capabilities. An intelligent
Watch Folder allows for file aggregation, networked
supervision of multiple encoding licenses, SDK for
integration with user’s own Media Asset
Management system.
.
Because Content Deploys Everywhere
KEY FEATURES
•
Multi-Codec/Multi-Format Transcoding Solution
running on PC
•
From QCIF to 1080p
•
Support of Legacy Mezzanine Formats
•
Closed Caption/DVB Subtitle/DVB Teletext
multiplexing capabilities
•
Open API & SDK
BENEFITS
•
Maximize Contents within Multiple Delivery
•
Faster Than Real-Time capabilities
•
Innovative solution fitting into any 24/7 high-end
workflow
•
Compliant with the mandatory Industry
Standards
•
Perfect Match with KTF 7100/7200
www.ateme.com
File Encoder 2
PRODUCT VERSIONS
VIDEO COMPRESSION
Standard
H.264 Baseline, Main and High Profiles up to Level 5.1
MPEG-2 Main and 4:2:2 Profiles up to High Level
GOP structure
Fixed/variable GOP size
Automatic scene cut detection
IDR-frame strategy control
Progressive, Field, PAFF, MBAFF modes (H.264)
Progressive,PAFF,MBAFF,PAFF+MBAFF modes (MPEG-2)
Rate control modes / Output bitrate
CBR, VBR, 2-pass (from 20 kbps to 100 Mbps)
AUDIO COMPRESSION
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC
ADTS/LATM format
Dolby Digital/Dolby Digital Plus (up to 5.1)
Dolby Digital/Dolby Digital Plus pass-through
Rate control mode: CBR
DATA PROCESSING
Closed Captioning
SCTE 20, ATSC, NA DBS Line 21, Divicom® Line 21
from .SCC files or Cable Labs MPEG-2 files
Subtitles
DVB Subtitles, DVB Teletext, Burn-in
from DVD, .STL, .SRT or DVB MPEG-2 files
SUPPORTED INPUT FORMATS
Media containers
.TS, .MPG, .AVI*, .MOV*, .MXF (Op1a/Op1b/Op3c/OpAtom/P2
HD) , .VOB (.IFO), .WAV, .AIFF, MP4, AC3/EAC3
Audio / Video codecs
Video:
YUV uncompressed 4:2:0, 4:2:2, MPEG-4 AVC / H.264,
MPEG-1 video, MPEG-2 video, MPEG-4 ASP video*, DV,
DVCPRO25 / 50, DVCPRO HD , AVC-Intra 50/100,
Cineform® AVI, Sony® IMX 30/40/50*
Audio:
PCM, MPEG-audio Layer II, MPEG-2 AAC-LC,
MPEG-4 AAC-LC, MPEG-4 HE-AAC, MPEG-4 HE- AACv2,
AACv2, AC3 / AC3+, Dolby® E
* some containers / codec combination support are subject to system
installation
PREPROCESSING
Audio preprocessing/editing
Sound level renormalization (2-pass)
Sound level gain
Resampling
5.1 to stereo downmix
Wav files aggregation
Video preprocessing/editing
De-interlacing filtering
Denoising filtering
Logo insertion
Image cropping/resizing
3:2 pulldown/Inverse telecine
Frame rate conversion/decimation
.VOB files concatenation
Because Content Deploys Everywhere
FILE OUTPUT
MPEG-2 Transport Stream
Cable Labs/DVB/ATSC/ARIB compliances
Fully configurable (PIDs, PAT/PMT Period, Stuffing Rate,
ISO language descriptors)
MP4 file
Progressive download
AC3 Data Support
Hinting
CONFIGURATION AND MANAGEMENT
Batch encoding manager
One-click encoding with presets
Watch folder drop-in directory
Primary/backup management
PLATFORM MINIMUM REQUIREMENTS
Intel® Pentium PIV (Core 2 Duo recommended)
Windows 2000/XP /7/2003 Server/2008 Server , DirectX 9
PRODUCT OPTIONAL UPGRADES
Dolby Digital/Dolby Digital Plus Encoders
Native MXF decoder
Native Dolby E decoder
Multi encoder management
Command line
SDK
COMPLIANCY
www.ateme.com
ON DEMAND
MEDIA
Titan
High Density Platform For
Delivering Content to Multi-Screen
Massive Throughput
&Turbo Transcoding
File-Based Processing
ATEME Titan is the new generation’s high-density
solution tailored for mass content production
workflow. As hardware companion of widely
deployed KFE2 solution, Titan can transcode any
mezzanine files into high efficient H.264 or MPEG-2
files compliant with On Demand Industry Standards.
Furthermore, Titan features ATEME Turbo
Transcoding technology, leading to faster than realtime processing even for HD content. Titan is able to
produce multiple flavors of the same asset in the
fastest Turn Around Time increasing content value
by multi-screen delivery
KEY FEATURES
Multi-codec & Multi-format SD/HD transcoding
chassis
Turbo Transcoding for faster than real-time
processing
Support for any legacy mezzanine file
Open API & SDK for remote management
BENEFITS
Produce pristine quality over the lowest bitrates
Leveraging from innovative and optimized hardware
architecture, Titan drastically lowers power
consumption and so can be entitled as green
technology solution saving energy and reducing
OPEX.
Large scale throughput for mass production
workflow
7RU platform
footprint
Environment
consumption
Because Content Deploys Everywhere
lowering
friendly
transcoding
with
low
farm
power
www.ateme.com
Titan
VIDEO COMPRESSION
FILE OUTPUT
Standard
MPEG-2 Transport Stream
H.264 Baseline,Main,High Profiles up to Level 5.1
MPEG-2 Main and 4:2:2 Profiles up to High Level
Rate control modes / Output bitrate
CBR, VBR, 2-pass (from 20 kbps to 100 Mbps)
Encoding Mode
Progressive, Field, PAFF, MBAFF modes (H.264)
Progressive, PAFF, MBAFF, PAFF+MBAFF modes
(MPEG-2)
AUDIO COMPRESSION
Compression formats
MPEG-1 Layer II
MPEG-2/MPEG-4 AAC-LC
HEV1-AAC, HEV2-AAC
ADTS/LATM format
Dolby Digital/Dolby Digital Plus (up to 5.1)
Rate control mode:
CBR (from 32 kbps to 384kbps)
PREPROCESSING
Audio preprocessing/editing
Sound level renormalization (2-pass)
5.1 to stereo downmix
Wav files aggregation
Video preprocessing/editing
De-interlacing filtering
Denoising filtering
Logo insertion
Image cropping/resizing
3:2 pulldown/Inverse telecine
Frame rate conversion/decimation
DATA PROCESSING
Closed Captioning
SCTE 20, ATSC, NA DBS Line 21,Divicom®Line 21,
from .SCC files or Cable Labs MPEG-2 files
Subtitles
DVB Subtitles, DVB Teletext, Burn-in, from DVD, .STL,
.SRT or DVB MPEG-2 files
SUPPORTED INPUT FORMATS
Media containers
.TS, .MPG, .AVI*, .MOV*, .MXF
(Op1a/Op1b/Op3c/OpAtom/P2 HD) , .VOB (.IFO), .WAV,
Cable Labs/DVB/ATSC/ARIB compliances
MP4 file
Progressive download
AC3 Data Support
Hinting
CONFIGURATION / STORAGE / MANAGEMENT
Blades
Up to 18 blades
Full Scalable system
Redundancy management
Power Supply
4 hot-plug PSUs
N+1 Redundancy
Ethernet Output Interfaces
2x6x independent Gigabit Ethernet ports (100/1000
BaseT connectors)
- 2x Out-of-band, for management
Storage
Embedded 120GB Hard Drive per Blade
External NAS/SAN compatibility
System Management
QT/Web-based configuration
Batch encoding manager with queue management
Logs & Alarms Events
Watch folder drop-in directory
Primary/backup management
SOFTWARE OPTIONAL UPGRADES
Turbo Transcoding
Dolby Digital/Dolby Digital Plus Encoders
Native MXF decoder
Native Dolby E decoder
Supervision Redundancy
HARDWAREOPTIONAL UPGRADES
InfiniBand Switch
Spares blade
PHYSICAL
Dimensions 19” 7-RU (482 x 311 x 740 mm /
19”x1.75”x29.1”)
Weight (net) 42 kg / 92.5 lbs
Weight (fully loaded) 126 kg / 277.7 lbs
.AIFF, MP4, AC3/EAC3
Audio / Video codecs
Video:
YUV uncompressed 4:2:0, 4:2:2, MPEG-4 AVC /
H.264,MPEG-1 video, MPEG-2 video, MPEG-4 ASP
video*, DV,DVCPRO25 / 50, DVCPRO HD , AVC-Intra
50/100, Cineform® AVI, Sony® IMX 30/40/50*
Audio:
PCM, MPEG-audio Layer II, MPEG-2 AAC-LC,MPEG4 AAC-LC, MPEG-4 HE-AAC, MPEG-4 HE- AACv2,
AC3 / AC3+, Dolby® E
ENVIRONMENTAL
Cooling Air flow from front to rear
Operating Temperature 5 to 40 °C / +41 ° to +104 °F
Storage Temperature -20 to 70 °C / +32° to +158 °F
Operating humidity 5 to 90% (non condensing)
Input voltage range 110-240 VAC*, 50/60 Hz
Electrical compliance and safety CE (UL, FCC, RoHS)
COMPLIANCY
*to consult us
Because Content Deploys Everywhere
www.ateme.com
LIVE
MEDIA
Network Management
Solution
with Kyrion Video Head End
Designed & supplied by the vendor-independent
network management system expert Skyline
Communications, DataMiner is the leading multiopen vendor solution for IPTV, satellite, broadcast
and cable video head end monitoring and control.
DataMiner supports entire operational ecosystem
for ATEME Kyrion® video head end. The Solution
enables operators to significantly reduce
operational expenses and to generate new
business opportunities by managing their legacy
digital operational environment while expanding
with new generation products such as ATEME
Kyrion encoders.
ATEME professional service team is capable of
designing and customizing your head end as per
requirements, hence making it a one stop shop
capable of supporting the operator in regaining
control of its operation.
KEY FEATURES & BENEFITS
Designed for 24/7 operations with real-time
access and control of Kyrion solutions
N+M automatic device redundancy support
Alarm management via a powerful Alarm
Console featuring sorting, smart filtering,
masking & acknowledging, user customization,
exporting, etc...
User-definable bubble-up and drill down tree
structure for intuitive navigation in your
operational environment, including smart search
tool
Intuitive & user-friendly UI spanning across your
entire operational environment and packed with
unique features and capabilities, including the
renowned MS Visio® compliant topological
bubble-up & drill-down display
Personalized notifications via e-mail triggered
by user defined events
Scalable from small systems to corporate wide
Deployments
Because Content Deploys Everywhere
www.ateme.com
Network Management
DataMiner plug in ordering options
DMS Report Engine: for advanced web
based
reporting,
user-defined
e-mail
reporting and reporting through third party
production web portals. DMS Correlation
Engine: for intelligent processing of alarms,
based on a powerful correlation engine and
user defined knowledge base.
DMS Automation Engine: for automation of
the most complicated procedures across all
vendor and system boundaries.
DMS Mobile Gateway: for interactive
interfacing via text messaging and mobile
webUI.
ATEME (www.ateme.com) is a world-leading
provider of video compression solutions.
ATEME’s renowned technology supports
Mobile, SD and HD content, deployed across
any platform. ATEME provides broadcasters,
telcos and content owners with unmatched
compression quality and bandwidth efficiency
thanks to in-house H.264 expertise. With
ATEME Kyrion™ hardware and software
products, customers benefits from latest
technology in Contribution, Video Head End
and Multi-Screen Transcoding applications
for increasing revenue and lowering OPEX.
DMS Spectrum Analysis: for interactive
remote spectrum analysis and automated RF
performance monitoring.
DMS Dashboards: for consolidation of Key
Performance Indicators in real-time updated
and user-defined web UI.
*Contact us for more information
Because Content Deploys Everywhere
Skyline Communications, with over 20
years of experience in the industry, is a
vendor independent supplier of multivendor
network management solutions. DataMiner
flagship solution has been awarded as best
network management solution and is
currently deployed by industry leaders in
satellite, HFC broadband, IPTV and
broadcast industry.
www.ateme.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising