get accurate! go digital! - Cooper
A Baseline For Food Safety
Using the correct tools, including accurately calibrated
thermometers, is an essential component of any basic HACCP
plan. Cooper-Atkins believes that every foodservice professional
should implement a regular routine to ensure their thermometers
are accurate and ready to use.
Calibration is a formal comparison of any item to a known
standard that is of higher accuracy. The comparison is normally
conducted under controlled environmental conditions and typically
not done on-site. It is traceable to a known standard through
an unbroken chain of comparison to the National Institute of
Standards and Technology (N.I.S.T.).
Validation is a quick, less formal comparison of any item against a
single temperature point, most commonly an ice bath. It is performed
regularly, can be performed on-site, and is a confirmation that the
instrument is accurate to within acceptable tolerance.
When validating thermometers, it is usually by means of a single
test point such as an ice bath* (32°F). If the thermometer
is validated by such means and reads 32°F (± accuracy
tolerance of the instrument) it now meets the FDA Guidelines.
*NOTE: Use crushed, not cubed, ice to make the ice
bath. Tests show that using cubed ice can result in an
ice bath with a baseline temperature higher than
32°F, resulting in a false reading.
MAX Pen-Style, Digital Pocket Test DPP800W
• Temperature Range: -40° to 450°F (-40° to 232°C)
• Accuracy: ±1°F (±0.5°C)
• Resolution: 0.1°
• <6 second response time
• IPX7 Waterproof rated - dishwasher-safe
• EZ-Read large LCD
• 4” (102 mm) stainless steel stem with ultra-fine tip
• Min / Max / Hold modes
• Anti-microbial additive
• CE certified, NSF listed, WEEE marked and RoHS compliant
LIFETIME WARRANTY:
Any AFL instrument that proves
to measure temperatures out
of the specified accuracy range
or be defective in material or
workmanship, will be replaced,
without charge, upon receipt of
the unit prepaid.
Digital Refrigerator / Freezer Thermometer 2560
• Temperature Range: -22° to 122°F (-30° to 50°C)
• Accuracy: ±1°F (±0.5°C)
• Resolution: 0.1°
• Water-resistant
• Stands or hangs
• Min / Max / Reset features
• Anti-microbial additive
• CE certified, NSF listed, WEEE marked and RoHS compliant
The same innovative technology applied in our popular
thermocouple instruments is now available in select
digital thermometers. With calibration settings stored in a
non-volatile memory chip, field adjustment has become a
thing of the past. And there’s no risk of introducing error into
the instrument. Digital thermometers are used in all aspects
of a good HACCP management program.
GO DIGITAL!
Digital Pocket Test with Temperature Alarm DFP450W
• Temperature Range: -40° to 450°F (-40° to 232°C)
• Accuracy: ±2°F (±1°C)
• Resolution: 0.1°
• <6 second response time
• IPX7 Waterproof rated - dishwasher-safe
• Adjustable temperature alarm setting
• 4.75” (121 mm) stainless steel stem
• Min / Max / Hold modes
• Anti-microbial additive
• CE certified, NSF listed, WEEE marked and RoHS compliant
GET ACCURATE!
E!
T
A
R !
U
C TAL
C
I
A
G
T DI
E
G
GO
Receiving
Preparing
Holding
Serving
Pen-Style, Digital Pocket Test DPP400W
U.S. Food and Drug Administration
Center for Food Safety & Applied
Nutrition Food Code
CHAPTER 3 FOOD
3-501.19 Time as a Public Health Control
(B) The FOOD shall have an initial TEMPERATURE of 41°F (5°C)
or less if removed from cold holding temperature control, or 135°F
(57°C) or greater if removed from hot holding temperature control.
CHAPTER 4 EQUIPMENT, UTENSILS AND LINENS
4-502.11 Good Repair and Calibration.
(A) UTENSILS shall be maintained in a state of repair or condition that complies with the requirements specified under Parts 4-1 and
4-2, http://www.fda.gov/Food/FoodSafety/RetailFoodProtection/
FoodCode/FoodCode2009/default.htm or shall be discarded.
(B) FOOD TEMPERATURE MEASURING DEVICES shall be calibrated
in accordance with manufacturer’s specifications as necessary to
ensure their accuracy.
(C) Ambient air temperature, water pressure, and water
TEMPERATURE MEASURING DEVICES shall be
maintained in good repair and be accurate within
the intended range of use.
• Temperature Range: -40° to 392°F (-40° to 200°C)
• Accuracy: ±2°F (±1°C)
• Resolution: 0.1°
• <6 second response time
• IPX7 Waterproof-rated
• 2.75” (70 mm) stainless steel stem
• Min / Max / Hold modes
• Anti-microbial additive
• CE certified, NSF listed, WEEE marked and RoHS compliant
Cooling Validator (not shown) TTM41-0 / TTM41-10
• Temperature Range: -4° to 302°F (-20° to 150°C)
• Accuracy: ±2°F (±1°F)
• Timer Range: 6 hours : 59 minutes
• Water-resistant
• 15” (381 mm) / 10” (254 mm) stainless
steel stem with adjustable vessel clip
• Min / Max / Hold modes
• Anti-microbial additive
• CE certified, NSF listed, WEEE marked and RoHS compliant
QUICK RESPONSE
ACCURACY
GUARANTEED
EZ-READ
SAVES LABOR
Cooper-Atkins Corporation
33 Reeds Gap Road
Middlefield, CT 06455-0450
800-835-5011 • 860-347-2256 • www.cooper-atkins.com
67-909-10M-V0612
Accuracy to the Highest Degree
LIFETIME WARRANTY: Any AFL instrument
that proves to measure temperatures
out of the specified accuracy range
or be defective in material or workmanship,
will be replaced, without charge, upon
receipt of the unit prepaid.
We are so committed to ensuring
the accuracy of our products, that
we guarantee it!
Always Validate
Your Thermometer
Validate the accuracy of your thermometer
with our NEW, easy-to-use VALCUP (9325).
Just fill with crushed ice, add water, insert
thermometer and validate.
MAX Pen Style Digital
Pocket Test Thermometer
Digital Pocket Test with
Temperature Alarm
Digital Refrigerator /
Freezer Thermometer
Pen Style Digital
Pocket Test Thermometer
DPP800W
DFP450W
2560
DPP400W
• EXTRA-LONG
STEM WITH
ULTRA-FINE TIP
FOR <6 SECOND
RESPONSE TIME
• USE TO TEST
DISHWASHER
RINSE
TEMPERATURE
• EXTRA-LONG
STEM WITH
ULTRA-FINE TIP
• ULTRA-FINE TIP
FOR <6 SECOND
RESPONSE TIME
• USE TO TEST
DISHWASHER
RINSE
TEMPERATURE
• MIN / MAX HOLD
FEATURES
• WATERPROOF
• ADJUSTABLE
TEMPERATURE
ALARM SETTING
• EASY TO READ
• MIN / MAX READINGS
• THE FIRST NSF LISTED
DIGITAL REFRIGERATOR /
FREEZER THERMOMETER
FOR MORE
INFORMATION
See back cover for all Accurate for Life instrument specifications
SCAN HERE
• EZ-READ LCD
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement