DXLink

TM

Multi-Format Multimode Fiber

Transmitter, Duplex

DXF-TX-MMD (FG1010-362)

DATA SHEET

Overview

The DXLink Multi-Format Fiber Transmitter sends analog and digital audio and video signals including HDMI with HDCP up to 300 meters over multimode fiber. Use the DXLink Fiber

Transmitter in conjunction with the Enova DGX 8, 16, 32 or 64 to transmit clear, uncompressed video at the fastest data rate in the industry – 10 Gbps. The DXF-TX-MMD also sends and receives control commands from the Enova DGX Digital Media Switcher with integrated NetLinx providing a total control and distribution solution to all end points.

COMMON APPLICATIONS

The ideal entry-point for any source designed into an Enova DGX integrated system that requires the distance capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums. Directly connect video sources such as PCs using the HD-15 multi-format input connection or HDMI input and easily include audio on the same fiber cable by using the stereo or digital audio connection.

FEATURES

 HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 300 m

 Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps

 Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments

 InstaGate Pro® Technology – Easily integrate HDCP into system designs and enjoy hassle free matrix switching to all compliant displays, no tools, no delays and no key constraints – it just works



Native NetLinx® Control Everywhere – Control connected source devices using the built-in IR and RS-232 ports





Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field

Multi-Format Analog Port and HDMI Port – Supports legacy analog signals – RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort and DVI signals

 Ethernet Connectivity – Provides ICSLan Ethernet support at the Transmitter – add Ethernet connectivity to a

Touch Panel, plug in a WAP or stream IP audio/video to a Ethernet enabled source device

© 2014 AMX. All rights reserved.

SPECIFICATIONS

GENERAL

Dimensions (HWD)

Weight

Shipping Weight

MTBF

Noise Level

Airflow

Mounting Options

Regulatory Compliance

Safety Certification

Included Accessories

Optional Accessories

Compatible AMX Products

ACTIVE POWER REQUIREMENTS

AC Power

Power Consumption (Max)

Power Connector

POWER SUPPLY

External, Included

1” x 8 3/4” x 5 1/5” (2.54 x 22.12 cm x 13.08 cm)

Approximately 1.1 lb (0.50 kg)

Approximately 2.2 lb (1 kg)

124,232 hours

0 dBA @ 1m (typ), 45.3 dBA @ 1m (max)

Convection (openings on top of case, typ), forced air

(out of front plate, when fan is active)

Compatible V Style mounting options:

•AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack

Mounting Tray with Fill Plates (FG1010-721)

•AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting

Tray (FG1010-720)

•AVB-VSTYLE-SURFACE-MNT, V Style Single Module

Surface Mount Brackets (FG1010-722)

•AVB-VSTYLE-POLE-MNT, V Style Single Module Pole

Mounting Kit (FG1010-723)

•UL 60950‐1

•CSA 60950-1

•IEC 60950‐1

•CE EN 60950‐1

•CE EN 55022 Class A

•CE EN 55024

•FCC CFR Title 47 Part 15 Subpart B Class A

•ICES-003 Class A

•RoHS / WEEE Compliant

Class 1 Eye safe per requirements of IEC 60825-1 /

CDRH

Ships with a desktop power supply with power cord

•AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack

Mounting Tray with Fill Plates (FG1010-721)

•AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting

Tray (FG1010-720)

•AVB-VSTYLE-SURFACE-MNT, V Style Single Module

Surface Mount Brackets (FG1010-722)

•AVB-VSTYLE-POLE-MNT, V Style Single Module Pole

Mounting Kit (FG1010-723)

•CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)

•IR03, External IR Receiver Module (FG-IR03)

•CC-USB, USB Programming Cable (FG10-5965)

•Enova DGX 8/16/32/64 Digital Media Switchers with

DGX-I-DXF-MMD, Enova DGX DXLink Mutimode Fiber

Input Board, Duplex (FG1058-622) installed

100-240 VAC single phase, 50-60 Hz

0.8 A max. (100-240 VAC)

20 W

2.1 mm DC Power Jack

Each Multi-Format TX ships with a desktop power supply with power cord

2.5 A at 12 V, Max 13.5 V

2

ENVIRONMENTAL

Temperature (Operating)

Temperature (Storage)

Humidity (Operating)

Humidity (Storage)

Heat Dissipation (On)

ETHERNET

Ethernet Connection

DXLINK FIBER

Fiber Connector

Fiber Cable Type

Fiber Cable Length

Transport Layer Throughput

Fiber Transceiver Type

Optical Wavelength

Optical Budget

Optical Transceiver Mean

HDMI

Input Connector

Compatible Formats

Signal Type Support

Local Loopback Output Connector

Progressive Resolution Support

Interlaced Resolution Support

3D Format Support

Deep Color Support

Color Space Support

32° to 104° F (0° to 40° C)

-22° to 158° F (-30° to 70° C)

5% to 85% RH (non-condensing)

0% to 90% RH (non-condensing)

69 BTU/hr

(1) RJ-45, TCP/IP Port (ICS LAN 10/100)

LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS

10A)

OM3 50/125µm

300m (984 ft)

10.3125 Gbps

10G SFP+

850 nm

6.8 dB (typ) between DXLink Fiber Transceivers

Optical Modulation Amplitude (OMA): -4.3 dBm (min)

Optical Modulation Amplitude (OMA) Sensitivity: -11.1 dBm (typ)

-1 dBm (average power)

(1) HDMI Type A Female

HDMI, HDCP , DVI

HDMI

DVI-D (single link with HDMI cable adapter)

DisplayPort ++ (Input Only, with HDMI or DVI cable adapter)

(1) HDMI Type A Female Local Loopback Output, +5 V

DDC Pin Output 55 mA, non-scaling

(Single Link With Cable Adapter)

480p up to 1920x1200 @ 60 Hz (including but not limited to those resolutions shown in the “Instruction

Manual – DXLink Fiber Transmitters and Receivers”)

480i, 576i, 1080i (including but not limited to those resolutions shown in the “Instruction

Manual – DXLink Fiber Transmitters and Receivers”

Note-Reminder: Interlace video supported into the

Transmitter, progressive only supported out of the

Receiver unless in non-scaling Bypass

Yes, if Scaler on corresponding output board or DXLink

Fiber RX is set to Bypass mode

Frame Packing 1080p 24Hz, Frame Packing 720p

50/60Hz, Frame Packing 1080i 50/60Hz, Top-Bottom

1080p 24Hz, Top-Bottom 720p 50/60Hz, Side-by-Side

Half 1080i 50/60Hz

24-bit, 30-bit

30-bit supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less

RGB 4:4:4

YCbCr 4:4:4 and 4:2:2

3

HDCP Support

CEC Support

DDC/EDID Support

Propagation Delay (Typical)

Input Voltage (Nominal)

Input Re-clocking (CDR)

Input Equalization

Video Data Rate (Max)

Video Pixel Clock (Max)

Audio Format Support

Audio Resolution

Audio Sample Rate

Local Audio Support

ANALOG VIDEO

Input Connector

Compatible Formats

Progressive Resolution Support

Interlaced Resolution Support

Auto-Adjust Input

RGB Input Signal Level Range

RGB Input Impedance

HV Sync Input Signal Level Range

HV Sync Input Impedance

Digital Processing

Y/Pb/Pr Input Signal Level Range

Y/Pb/Pr Input Impedance

Y/c (S-Video) Input Signal Level Range

(Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4)

Yes

Supports AMX HDCP InstaGate Pro Technology

When used with an Enova DGX Digital Media Switcher the key support is up to 16 sinks per output, independent of source device

None

When used with Enova DGX 8/16/32/64 Digital Media

Switchers the HDMI and VGA EDID is passed from the Enova Switcher input to the TX and is user re- programmable, see the "Enova DGX Digital Media

Switcher Instruction Manual" for supported EDID resolutions for each board type

4.8 us

1.0 Vpp Differential

Yes

Yes, Adaptive

4.95 Gbps / 5.568 Gbps

5.568 Gbps supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-

861 formats and resolution is 1080p60 or less

165 MHz/185.625 MHz

185.625 MHz supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-

861 formats and resolution is 1080p60 or less

Dolby TrueHD, Dolby Digital, DTS-HD Master Audio,

DTS, 2 CH through 8 CH L-PCM

Dolby Digital and DTS support up to 48kHz, 5.1 channels

16 bit to 24 bit

32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz

Insertion

(1) HD-15, breakout cable required for RGB formats

RGBHV, RGBs, RGsB

YPbPr (HDTV)

Y/c (S-Video), C (Composite)

480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown in the “Instruction

Manual – DXLink Fiber Transmitters and Receivers”

480i, 576i, 1080i including but not limited to those resolutions shown in the “Instruction

Manual – DXLink Fiber Transmitters and Receivers”

If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler

Bypass mode interlaced input will pass through

Supported

1 Vpp nominal

75 Ω

2 to 5 Vpp

2.5 pF Typ, 10 pF Max

24 bit, 165 MHz

1.0 Vpp for Y, 700 mVpp for Pb Pr

75 Ω

1.0 Vpp for Y, 1.0 Vpp for c

4

Y/c (S-Video) Input Impedance

C (Composite) Input Signal Level Range

C (Composite) Input Impedance

S/PDIF DIGITAL AUDIO

Input Connector

Input Signal Types

S/PDIF Audio Format Support

S/PDIF Resolution

S/PDIF Sample Rate

S/PDIF Input Signal Level Range

S/PDIF Input Impedance

Analog to Digital Reference Level

ANALOG AUDIO

Input Connector

Input Signal Types

Analog Input Level (Max)

Analog Input Impedance

Analog to Digital Conversion

Analog to Digital Reference Level

USB (HID) KEYBOARD & MOUSE

USB (HID)

CONTROLS

ID Pushbutton

Advanced Configuration Interface

Serial

IR RX

IR TX

INDICATORS

Power Indicator

75 Ω

1.0 Vpp

75 Ω

(1) RCA Jack, video signal must be present to pass audio

S/PDIF, video signal must be present to pass audio

Dolby Digital, DTS, 2 CH L-PCM

Dolby Digital and DTS support up to 48kHz, 5.1 channels

16 to 24 bit

32 kHz, 44.1 kHz, 48 kHz, 96 kHz

200 mVpp to 600 mVpp terminated

75 Ω

+2.5 dBu = 0 dBfs

(1) 3.5mm mini-stereo jack, video must be present to pass audio

Stereo analog, video must be present to pass audio

+2.5 dBu, unbalanced

10k Ω

48 kHz Sample Rate, 24-bit

+2.5 dBu = 0 dBfs

(1) USB Mini A/B Connector (“HOST”); connect a

DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver

For a list of HID devices which have been tested and found to be working well with the latest firmware please visit: http://www.amx.com/products/AVB-RX-

DXLINK-HDMI.asp and view the document “DXLink HID

Keyboard and Mouse Supported Devices”

Toggle between DHCP and static IP addressing

Places system in NetLinx Device ID assignment mode

Reset the factory default settings

Restore the factory firmware image

(1) USB Mini-B Connector (“PROGRAM”)

(1) 3.5mm Pluggable Phoenix Terminal Block

Bidirectional RS-232

Standard NetLinx Baudrate 1200-115k

Parity support Odd/Even/None

(1) 3.5mm Mini-Stereo Jack

Port for IR03 Receiver (Optional)

(1) 3.5mm Pluggable Phoenix Terminal Block

Port for IR01 Emitter (Optional)

(1) Green LED indicates whether or not the DXLF-

MFTX-MM-D is powered on

5

Digital Video Indicator

Audio Indicator

Analog Video Indicator

IR TX Indicator

IR RX Indicator

RS-232 TX Indicator

RS-232 RX Indicator

LINK/ACT

Status

CEC Indicator

USB Indicator

(1) Green LED indicates the presence of video signals through the module

(1) Green LED indicates the presence of digital audio signals through the module

(3) Green LEDs, 1 lights to indicate the presence of the type of analog video through the Multi-Format TX

(composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)

(1) Red LED lights during the transmission of IR data via the rear IR port

(1) Yellow LED lights during the receipt of IR data via the rear IR port

(1) Red LED shows serial transmit (TX) data activity

(1) Yellow LED shows serial receive (RX) data activity

(1) Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets

(1) Green LED lights when the Controller is programmed and communicating properly

Not currently supported

(1) Yellow LED lights when host device is connected

FRONT CONNECTORS

Advanced Configuration Interface

Local Loopback Output Connector

(1) USB Mini-B Connector (“PROGRAM”)

(1) HDMI Type A Female, non-scaling

BACK CONNECTORS

Video Input

HDMI Input

Analog Stereo Input

S/PDIF Digital Audio Input

ICS LAN/Ethernet Port

Serial

IR RX

(1) HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr,

Y/c / S-Video, composite (breakout cable is required for RGB formats)

(1) HDMI Type A Female

(1) 3.5mm Mini-Stereo Jack

(1) RCA Jack

(1) RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)

(1) 3.5mm Pluggable Phoenix Terminal Block

Bidirectional RS-232

Standard NetLinx Baudrate 1200-115k

Parity support Odd/Even/None

(1) 3.5mm Mini-Stereo Jack

Port for IR03 Receiver (Optional)

IR TX

USB (HID) Keyboard & Mouse

DXLink Fiber Output

(1) 3.5mm Pluggable Phoenix Terminal Block

Port for IR01 Emitter (Optional)

(1) USB Mini A/B Connector (“HOST”); connect a

DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver

(1) LC Duplex conforming to ANSI TIA/EAI 604-10

(FOCIS 10A)

2.1 mm DC Power Jack Local Power

For a more detailed pictorial drawing please visit: http://www.amx.com/products/DXF-TX-MMD.asp

About AMX

AMX hardware and software solutions simplify the implementation, maintenance, and use of technology to create effective environments. With the increasing number of technologies and operating platforms at work and home, AMX solves the complexity of managing this technology with reliable, consistent and scalable systems. Our award-winning products span control and automation, system-wide switching and audio/video signal distribution, digital signage and technology management. They are implemented worldwide in conference rooms, homes, classrooms, network operation / command centers, hotels, entertainment venues, broadcast facilities, and more. ©2013 AMX. All rights reserved.

Specifications subject to change. Revised 11-August-2014.

AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153

6