Sigma EQ Hyper II balance charger Operating Manual

Below you will find brief information for balance charger Hyper II. The Sigma EQ Hyper II is a high-performance rapid charger/discharger with an integrated balancing circuit. It is computerised with a high performance microprocessor and specialised operating software. It can maintain your battery at its best condition and control it safely. This charger can charge or discharge up to 18 cell NiCd/NiMH and up to 6 Cell Lithium batteries with a maximum current of 10A.

PDF Download
Document
Sigma EQ Hyper II Operating Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • High-performance rapid charger/discharger
  • Integrated balancer
  • USB PC link
  • Temperature sensor
  • Individual cell voltage balancer for Lithium batteries
  • Balance Individual Cells on Discharge
  • Maximum Safety
  • Data Store/Load
  • PC Based Analysis using USB Communication

Frequently asked questions

The Sigma EQ Hyper II can charge and discharge 1-6 cell Li-ion/Li-Fe, 1-18 cell NiCd/NiMH and 2-24V Lead-acid (Pb) batteries.

The maximum charge current is 12A and the maximum discharge current is 5A.

The maximum power output of the charger is 200 watts.

The Sigma EQ Hyper II has an individual cell voltage balancer built in. You can balance the cells by connecting the battery pack to the balance port on the charger.
Preparing document for printing…
0%