Native Instruments TRAKTOR S8 User manual
Native Instruments TRAKTOR S8 is a powerful DJ controller designed to enhance your TRAKTOR experience. This device seamlessly integrates with TRAKTOR PRO software, providing a tactile interface for all its features. Use S8 for live remixing, as a stand-alone mixer with turntables or CD decks, or for a combination of both. TRAKTOR S8 combines the power of computer-based DJing with the immediacy and flow you need to perform in various live situations.
Advertisement
Advertisement
MANUAL
The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this document is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native
Instruments.
“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instruments GmbH.
Mac, macOS, GarageBand, Logic, iTunes and iPod are registered trademarks of Apple Inc., registered in the U.S. and other countries.
Windows, Windows Vista and DirectSound are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other trademarks are the property of their respective owners and use of them does not imply any affiliation with or endorsement by them.
Document authored by: Christian Schulz
Software version: 2.11 (10/2016)
Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product.
Disclaimer
NATIVE INSTRUMENTS GmbH
Schlesische Str. 29-30
D-10997 Berlin
Germany www.native-instruments.de
NATIVE INSTRUMENTS North America, Inc.
6725 Sunset Boulevard
5th Floor
Los Angeles, CA 90028
USA www.native-instruments.com
NATIVE INSTRUMENTS K.K.
YO Building 3F
Jingumae 6-7-15, Shibuya-ku,
Tokyo 150-0001
Japan www.native-instruments.co.jp
NATIVE INSTRUMENTS UK Limited
18 Phipp Street
London EC2A 4NU
UK www.native-instruments.co.uk
© NATIVE INSTRUMENTS GmbH, 2016. All rights reserved.
Contact
Table of Contents
Table of Contents
TRAKTOR KONTROL S8 - Manual - 4
Table of Contents
TRAKTOR KONTROL S8 - Manual - 5
Table of Contents
Changing SINGLE FX in Performance Mode ................................................139
Changing GROUP FX in Performance Mode ................................................142
TRAKTOR KONTROL S8 - Manual - 6
Table of Contents
3.10.4.2 Combining Sounds of different Stem Decks ...............................................158
TRAKTOR KONTROL S8 - Manual - 7
Table of Contents
Performance Mode Button .........................................................................201
FILTER Button and FILTER Knob .................................................................223
TRAKTOR KONTROL S8 - Manual - 8
Table of Contents
TRAKTOR KONTROL S8 - Manual - 9
Table of Contents
Performance Mode Button .........................................................................254
TRAKTOR KONTROL S8 - Manual - 10
Table of Contents
TRAKTOR KONTROL S8 - Manual - 11
Table of Contents
TRAKTOR KONTROL S8 - Manual - 12
Welcome to the World of TRAKTOR KONTROL S8!
Where to Start
1 Welcome to the World of TRAKTOR KONTROL S8!
Thank you for choosing TRAKTOR KONTROL S8.
What is TRAKTOR KONTROL S8?
TRAKTOR KONTROL S8 provides a direct tactile interface to TRAKTOR PRO's features and allows you to achieve more with the controller hardware so you have to do less on your computer screen.
Whether you intend to perform and remix live with TRAKTOR, use S8 as a stand-alone mixer with turntables or CD decks or a combination of both; S8 has you covered!
S8 enables performance in various live situations, combining the power of computer-based
DJing with the immediacy and flow you need to focus on your audience.
1.1
Where to Start
TRAKTOR KONTROL S8 installation provides you with many information sources. These are intended to be read in the following sequence to ensure easy access for users of all skill levels:
â–Ş TRAKTOR Getting Started
â–Ş TRAKTOR Manual
â–Ş TRAKTOR KONTROL S8 Manual (this document)
Your First Stop: Getting Started
This document guides you through configuration of TRAKTOR to work with a hardware controller by means of the Setup Wizard, as well as importing music into your Track Collection. Afterwards, it introduces you to TRAKTOR's basic concepts and workflows and helps you set up your system correctly.
TRAKTOR KONTROL S8 - Manual - 13
Welcome to the World of TRAKTOR KONTROL S8!
Where to Start
TRAKTOR Manual
The Manual helps you learn all of the workflows which make TRAKTOR a unique DJing solution. In addition to learning to use TRAKTOR's core features, this document gives advice on working in various configurations; from using TRAKTOR in the most basic setup on its own to integrating turntables, external DJ mixers and audio interfaces, as well as the SCRATCH extension.
Access the TRAKTOR manual via TRAKTOR's Help menu. The 'Open Manual...' entry will open the Documentation sub-folder inside TRAKTOR's application folder.
TRAKTOR KONTROL S8 Manual
The S8 Manual picks up where controlling TRAKTOR features from the S8 are concerned. A detailed tutorial section guides you through accessing the basics like loading tracks, mixing, setting cue points, looping, and using Remix Decks from S8.
Next, a comprehensive Hardware Reference details each and every component you will encounter on the TRAKTOR KONTROL S8 controller. The later chapters of this manual provide additional information on solving common issues, and the device's full technical specification.
CONTROLLER EDITOR Manual
Besides using S8 with the dedicated TRAKTOR software, you can also use it as a powerful and highly versatile MIDI controller with any other MIDI-capable application or device. This is made possible by the CONTROLLER EDITOR software, an application which allows you to assign MIDI controller messages to S8's pads, knobs, faders and encoders. The CONTROL-
LER EDITOR is usually automatically installed during TRAKTOR's installation. For more information on this, please refer to the CONTROLLER EDITOR Manual available as a PDF file in the Documentation subfolder of the CONTROLLER EDITOR installation folder on your hard disk.
Other Online Resources
If you are experiencing problems related to your Native Instruments product that the supplied documentation does not cover, there are several ways of getting help:
â–Ş Knowledge Base
â–Ş User Forum
TRAKTOR KONTROL S8 - Manual - 14
Welcome to the World of TRAKTOR KONTROL S8!
Manual Conventions
â–Ş Technical Support
â–Ş Registration Support
You will find more information on these in chapters
and
.
1.2
Manual Conventions
This section introduces you to the signage and text highlighting used in this manual. This manual uses particular formatting to point out special facts and to warn you of potential issues.
The icons introducing these notes let you see what kind of information is to be expected:
Whenever this exclamation mark icon appears, you should read the corresponding note carefully and follow the instructions and hints given there if applicable.
This light bulb icon indicates that a note contains useful extra information. This information may often help you solve a task more efficiently, but does not necessarily apply to the setup or operating system you are using; however, it's always worth a look.
Furthermore, the following formatting is used:
â–Ş Text appearing in (drop-down) menus (such as Open…, Save as… etc.) and paths to locations on your hard drive or other storage devices is printed in italics.
â–Ş Text appearing elsewhere (labels of buttons, controls, text next to checkboxes etc.) is printed in blue . Whenever you see this formatting applied, you will find the same text appearing somewhere on the screen.
â–Ş Text appearing on displays of the S8 controller is printed in light grey . Whenever you see this formatting applied, you will find the same text on a controller display.
â–Ş Text appearing on labels of the hardware controller is printed in orange . Whenever you see this formatting applied, you will find the same text on the controller.
â–Ş Important names and concepts are printed in bold.
â–Ş References to keys on your computer’s keyboard you’ll find put in square brackets (e.g.,
“Press [Shift] + [Enter]”).
TRAKTOR KONTROL S8 - Manual - 15
Welcome to the World of TRAKTOR KONTROL S8!
Manual Conventions
â–ş Single instructions are indicated by this play button type arrow.
→ Results of actions are indicated by this smaller arrow.
Naming Conventions
Throughout the documentation, we will refer to the TRAKTOR KONTROL S8 hardware controller either as the controller or simply S8.
The TRAKTOR 2 software and TRAKTOR SCRATCH will be referred to as TRAKTOR.
Button Combinations and Shortcuts on Your Controller
Most instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:
“Press SHIFT + PLAY ” means:
1.
Press and hold SHIFT .
2.
While holding SHIFT , press PLAY and release it.
3.
Release SHIFT .
FX Knobs and Buttons
Above each of the Displays, there's a row of FX knobs and FX buttons which aren't labeled.
Similarly, the knobs below the display are unlabeled, the buttons are all labeled ON . To differentiate them, we'll refer to them as FX knobs 1-4 and FX buttons 1-4 for the elements above the display and Performance knobs 1-4 and Performance buttons 1-4 beneath the display.
TRAKTOR KONTROL S8 - Manual - 16
Welcome to the World of TRAKTOR KONTROL S8!
Manual Conventions
Numbering scheme for FX and Performance controls
Display Buttons
On each side of a display, there are two buttons marked by a square icon. To differentiate them from each other, we'll refer to them as depicted here:
TRAKTOR KONTROL S8 - Manual - 17
Welcome to the World of TRAKTOR KONTROL S8!
Manual Conventions
Numbering scheme for Display Buttons
Pads
Each Deck comes with eight multi color pads. Where necessary, we'll refer to them in this order:
Numbering of the Pads in the PERFORMANCE section
TRAKTOR KONTROL S8 - Manual - 18
Using Your S8—Getting Started
2 Using Your S8—Getting Started
This section will guide you through the most common tasks you will encounter during your work with TRAKTOR KONTROL S8. Most of the tutorials included are workflow-oriented. They start with the simplest tasks and progressively lead you to more complex operation, helping you to become familiar with TRAKTOR KONTROL S8.
The tutorials presented here make use of the included demo tracks, which were automatically copied to your hard disk during the TRAKTOR KONTROL S8 installation procedure. Therefore, you can follow these tutorials even if you haven't imported your own music.
Although the S8 can be used as a stand-alone mixer, the tutorials here focus on using the device as the integrated controller for the TRAKTOR software on your computer. By the end of this chapter you will be equipped with the fundamental knowledge to enjoy using your TRAK-
TOR KONTROL S8, and begin to uncover the creative opportunities it presents to your DJ sessions.
General Prerequisites
We assume here that your TRAKTOR KONTROL S8 system is already up and running. If that's not the case, please follow the instructions in the separate Setup Guide and return to this chapter when you are ready.
In case you already changed some settings in TRAKTOR KONTROL S8 before you start with these tutorials, we strongly recommend you to reset your TRAKTOR KONTROL S8 system to the factory settings by doing the following:
1.
In the TRAKTOR software, click the Help menu in the menu bar at the top of your screen
(on Mac OS X) or at the top of the window (on Windows), and select Help > Start Setup
Wizard.
2.
In the window that opens, click Next to skip the setup screens.
3.
On the YOUR TRAKTOR SETUP screen, click Finish at the bottom right corner without selecting anything else.
→ Your TRAKTOR KONTROL S8 is now reset to the factory settings.
TRAKTOR KONTROL S8 - Manual - 19
Using Your S8—Getting Started
Quick Overview of TRAKTOR KONTROL S8
The tutorials presented here assume that TRAKTOR KONTROL S8 is in its default factory state. If it’s not the case, we cannot guarantee that you will experience what is described here, and as a result you might find it difficult to follow the instructions.
2.1
Quick Overview of TRAKTOR KONTROL S8
This section briefly introduces S8’s main areas. The image below illustrates which areas of the
S8 control the respective areas in the TRAKTOR software.
Hardware Controller and Software side by side.
(1) Decks: S8 features two identically equipped Deck sections at the far left and right of the unit. These give you hardware control over the software Decks in the TRAKTOR PRO software.
Active TRAKTOR Decks always work in one of the Deck modes, as either Track Deck, Remix
Deck or Live Input. The left hardware Deck section controls TRAKTOR's Decks A and C, the right Deck section controls Decks B and D.
(2) FX Units: FX Units allow you to creatively process a track, ranging anywhere from just adding reverb for a build-up to completely messing up a beat with stutter effects. For that purpose, the TRAKTOR software offers a great selection of high-quality FX. These can easily be configured from S8 and be controlled by the FX controls. The left FX Unit on the S8 will be referred to as FX Unit 1 throughout this document, and the right FX Unit will be referred to as
FX Unit 2.
TRAKTOR KONTROL S8 - Manual - 20
Using Your S8—Getting Started
Enabling Decks
(3) Mixer: The 4-channel mixer is situated in the center of S8, and TRAKTOR's software interface. When connected to TRAKTOR, the knobs in S8's mixer section control the corresponding knobs on the software mixer.
2.2
Enabling Decks
By default, the Decks on your S8 are enabled after you start the TRAKTOR software for the first time. If, however, the Decks are not enabled (in Direct Thru mode), proceed as follows to enable the Decks.
The following images show disabled Decks:
Deck A in Direct Thru mode
TRAKTOR KONTROL S8 - Manual - 21
Using Your S8—Getting Started
Enabling Decks
Deck C in Direct Thru mode
To enable the Decks:
â–ş Push the TRAKTOR buttons of each Deck.
→ The TRAKTOR buttons light up in orange indicating the Deck is now in TRAKTOR mode.
The displays read No Track Loaded indicating the corresponding Decks are enabled.
TRAKTOR KONTROL S8 - Manual - 22
Using Your S8—Getting Started
Enabling Decks
The following images show enabled Decks:
Deck A enabled as Track Deck
Deck C enabled as Remix Deck
TRAKTOR KONTROL S8 - Manual - 23
Using Your S8—Getting Started
Using the Browser
2.3
Using the Browser
This tutorial explains how to use the Browser to access your music library. You will learn how to sort and preview your tracks in the Browser, and how to load tracks into Decks.
It is not possible to open the Browser on S8's left and right Decks simultaneously.
BROWSE Encoder, BACK Button, and Display section
2.3.1
Opening the Browser
To open the Browser:
TRAKTOR KONTROL S8 - Manual - 24
â–ş Push the BROWSE encoder.
The Browser will be displayed in the display.
Using Your S8—Getting Started
Using the Browser
2.3.2
Scrolling through Music Folders
To scroll through music folders:
TRAKTOR KONTROL S8 - Manual - 25
Using Your S8—Getting Started
Using the Browser
â–ş Rotate the BROWSE encoder. The selected entry will be highlighted in blue. The Browser
View shows your current location in the folder structure at the top of the display, e.g.
BROWSER > PLAYLIST > DEMO TRACKS .
To open folders and load tracks:
â–ş Press the BROWSE encoder to open a folder.
â–ş Press the BROWSE encoder to load a track.
To return to the previous folder:
â–ş Press the BACK button.
To exit the Browser:
â–ş Press the VIEW button. The display will return to Track view.
TRAKTOR KONTROL S8 - Manual - 26
Using Your S8—Getting Started
Using the Browser
2.3.3
Browsing using Touch Interactions
In addition to regular interactions with S8, you can perform touch interactions. However, to use touch interactions when browsing, the touch sensitivity for the BROWSE encoder has to be enabled:
1.
Open the TRAKTOR Preferences.
2.
Select the tab TRAKTOR KONTROL S8 .
3.
Enable the Touch Control Auto Open Browser on Touch .
→ The touch sensitivity is now enabled on the BROWSE encoder.
With touch sensitivity enabled the following touch interactions can be performed:
To open the Browser:
â–ş Touch the BROWSE encoder. The Browser will be displayed in the respective display.
To exit the Browser:
â–ş Release the BROWSE encoder or stop interacting in the Browser. The display will return to Track view.
2.3.4
Preview Tracks
In the Browser of the TRAKTOR KONTROL S8 it is possible to preview tracks directly.
To preview a selected track:
TRAKTOR KONTROL S8 - Manual - 27
Using Your S8—Getting Started
Using the Browser
1.
Press the ON button 4 to start preview. The preview is now audible in the headphones.
2.
Rotate Performance knob 4 to seek within the track in preview.
2.3.5
Sorting Tracks
To speed up scrolling through folders including a very large number of tracks, you can sort the tracks by categories TITLE , ARTIST , BPM , IMPORT DATE , # , and KEY . The selected category is displayed at the bottom-left in the Browser.
To sort your tracks by another category:
TRAKTOR KONTROL S8 - Manual - 28
Using Your S8—Getting Started
Using the Browser
â–ş Rotate Performance knob 1 until the desired category is selected in the SORT BY pop-up window. The tracks will then be resorted.
Additionally, you can display the tracks in ascending or descending order:
â–ş Press the ON button 1 to switch between ascending and descending order.
The Browser displaying tracks in descending order.
TRAKTOR KONTROL S8 - Manual - 29
Using Your S8—Getting Started
Playing Your First Track
The Browser displaying tracks in ascending order.
2.4
Playing Your First Track
In this tutorial, you will learn how to load and play back a track, how to check the audio outputs and how to quickly troubleshoot your system if no music can be heard. Before you proceed, ensure the following prerequisites are met:
Prerequisites
We assume your S8 is in the following state:
â–Ş The left Deck is focused on Track Deck A.
â–Ş The Channel A Crossfader Assign switch is set to the left position.
TRAKTOR KONTROL S8 - Manual - 30
Using Your S8—Getting Started
Playing Your First Track
â–Ş The Crossfader is set all the way to the left.
â–Ş On channel A, the channel fader is set to minimum, the EQ knobs, the GAIN knob, and the
Filter knob are set to center position.
â–Ş The MAIN knob is set to minimum.
2.4.1
Loading a Track
Let’s load the track “Techno 1” from the included demo tracks on to Deck A.
Since Deck A is in the top-left part of the TRAKTOR window, we will use the left Deck on your
S8. You can check this by looking at the left Deck’s display: you should see a blue indicator reading A :
TRAKTOR KONTROL S8 - Manual - 31
Using Your S8—Getting Started
Playing Your First Track
The Deck Display with DECK A indicator.
While looking at the left Deck's display reading No Track Loaded . Push Browse Knob , do the following:
1.
Press the BROWSE encoder of the left Deck to open the Browser.
2.
Navigate to the folder FAVORITES > Demo Tracks .
TRAKTOR KONTROL S8 - Manual - 32
3.
Scroll to track Techno 1 .
4.
Press the BROWSE encoder to load the track into Deck A.
→ The track is loaded. Its waveform and info appear in the display.
Using Your S8—Getting Started
Playing Your First Track
2.4.2
Playing a Track
Once a track is loaded:
TRAKTOR KONTROL S8 - Manual - 33
Using Your S8—Getting Started
Playing Your First Track
1.
Press the PLAY button at the bottom of the left Deck. The PLAY button lights up.
The waveform starts moving in the display. The track is assigned to MASTER .
2.
Gradually raise the channel A fader to maximum position.
TRAKTOR KONTROL S8 - Manual - 34
Using Your S8—Getting Started
Playing Your First Track
3.
Gradually turn the MAIN knob clockwise.
→ You will hear the track Techno 1 playing back through your speakers. If not, please check
↑ 2.4.3, If You Don’t Hear the Track
.
Each Deck Has Its Own Channel
The audio playing on each Deck can be further shaped by the controls on the corresponding channel of the Mixer. Since the track is loaded on Deck A, you can control its sound on channel A:
TRAKTOR KONTROL S8 - Manual - 35
Using Your S8—Getting Started
Playing Your First Track
The Channel A.
2.4.3
If You Don’t Hear the Track
If the track is playing but the audio coming through your amplification system is not loud enough, or if there is no sound at all, check the following:
TRAKTOR KONTROL S8 - Manual - 36
Using Your S8—Getting Started
Playing Your First Track
â–Ş At the bottom of your S8, verify that the Crossfader is moved all the way to the left:
â–Ş Above, the channel fader should be raised in channel A:
TRAKTOR KONTROL S8 - Manual - 37
Using Your S8—Getting Started
Playing Your First Track
â–Ş The channel meter should show some activity. If not, check that the HI , MID , and LOW knobs in channel A are set to the center position.
â–Ş At the top of the channel, adjust the input level by turning the GAIN knob.
â–Ş At the top center of the Mixer, the MAIN knob should be turned at least part of the way to the right. You should see the MAIN meters moving:
If you see some activity on the MAIN meters of your S8 but don’t hear any sound, then doublecheck the connection starting with the cable going from the S8’s Main Outputs to your PA.
TRAKTOR KONTROL S8 - Manual - 38
Using Your S8—Getting Started
Mixing In a Second Track
2.5
Mixing In a Second Track
Now that you have learned how to load and play a track from the S8, let’s mix in a second track on Deck B. By doing so, you will learn a few mixing basics which are essential for every
DJ: how to cue tracks, synchronize tracks, start the playback at the right position, and mix the tracks together using the Crossfader.
Prerequisites
We assume here that your S8 is in the following state:
â–Ş The track “Techno 1” is loaded into Deck A. The track is playing and audible.
â–Ş The right Deck is focused on Track Deck B.
â–Ş The Channel B Crossfader Assign switch is set to the right position.
â–Ş The Crossfader is all way to the left.
TRAKTOR KONTROL S8 - Manual - 39
Using Your S8—Getting Started
Mixing In a Second Track
â–Ş On channel B, the channel fader is set to minimum, the EQ knobs and the GAIN knob are set to the center position.
â–Ş The CUE VOL knob and the CUE MIX knob are set to minimum.
2.5.1
Loading a Second Track
We will choose the track “Techno 2” and load it into the right Deck B, as we did for Deck A in the previous tutorial.
TRAKTOR KONTROL S8 - Manual - 40
Using Your S8—Getting Started
Mixing In a Second Track
Track Deck B in its empty state.
While looking at the right Deck display reading " No Track Loaded, Touch Browse Knob" , do the following:
1.
Press the BROWSE encoder of the right Deck to open the Browser. The Browser resumes at the last selected item.
TRAKTOR KONTROL S8 - Manual - 41
2.
Scroll to the track Techno 2 .
3.
Press the BROWSE encoder to load the track into Deck B.
→ The track is loaded. Its waveform and info appear in the display.
Using Your S8—Getting Started
Mixing In a Second Track
2.5.2
Playing the Second Track
â–ş Press the PLAY button on the right Deck to start the playback.
TRAKTOR KONTROL S8 - Manual - 42
Using Your S8—Getting Started
Mixing In a Second Track
→ The track “Techno 2” starts playing. The PLAY button lights up and the waveform in the display starts moving.
You don’t hear anything from Deck B through the speakers yet because the Crossfader on the
S8 is all the way to the left.
To mix in the track “Techno 2” on Deck B:
â–ş Slowly move the Crossfader from left to right.
→ You should hear the track on Deck B fade in, whereas the track on Deck A progressively fades out as you move the Crossfader further to the right.
If you followed the instructions above, the two tracks won't mix well, as they're not in sync. To mitigate this, we have to beat-match the track in Deck B to the track playing on Deck A as described in the following section. So for now:
TRAKTOR KONTROL S8 - Manual - 43
Using Your S8—Getting Started
Mixing In a Second Track
â–ş Pull the Crossfader all the way back to the left.
If you still don’t hear any sound coming from Deck B even with the Crossfader all the way to the right, check the troubleshooting guidelines in section
.
2.5.3
Using Headphones to Prepare the Mix
Typically, a DJ needs to be able to prepare a mix on the headphone cue before committing to it and sending it to the main out. This is how you use your headphones for the preparation on
S8:
1.
Put on your headphones.
2.
On your S8, press the CUE button on channel B. The button lights up, indicating that
Deck B is now sent to the CUE channel.
3.
Gradually raise the CUE VOL knob.
TRAKTOR KONTROL S8 - Manual - 44
Using Your S8—Getting Started
Mixing In a Second Track
→ You will hear the cued track in your headphones.
Adjusting the balance between the cued track and main mix
For a great mix, you need to sync the affected Decks, match their levels and make sure that the result sounds good. Use the Cue controls to adjust the balance between the cued track (in this case Deck B) and the main mix (in this case Deck A) in your headphones:
â–ş Turn the CUE MIX knob counterclockwise when you want to concentrate on the cued track; turn it clockwise when you want to hear more of the main mix.
→ You are now ready to work on the track playing on Deck B without interfering with the main mix sent to your audience.
Regardless of the mix that you’re hearing in your headphones, the main mix is still controlled by the Crossfader and channel faders.
For smooth transitions, set the CUE MIX to the center position and adjust the cued
Deck's GAIN knob so that both sound equally loud.
2.5.4
Synchronizing the Second Track
Before mixing in the track playing on Deck B, we will use TRAKTOR’s automatic Sync feature to adjust its tempo to that of Deck A. Since playback of Deck A was started first, it is automatically assigned the role of Tempo MASTER. To sync Deck B to it:
TRAKTOR KONTROL S8 - Manual - 45
Using Your S8—Getting Started
Mixing In a Second Track
â–ş Press the SYNC button on the right Deck to synchronize its tempo and phase with those of Deck A.
→ The SYNC button lights up and the display of Deck B displays SYNC . Now the two tracks are in perfect sync.
Cue the Track
â–ş Slowly turn the CUE MIX knob clockwise.
→ You will hear the second track fade into the mix with both tracks in sync.
Note that you should always adjust the tempo of the cued track which is not audible to the audience!
TRAKTOR KONTROL S8 - Manual - 46
Using Your S8—Getting Started
Mixing In a Second Track
Mixing In the Second Track
When your track is ready for mixing:
â–ş Slowly move the Crossfader from the left to the right.
→ You just did your first mix with S8.
2.5.5
Interlude: In case the Left Track has finished
The track “Techno 1” on Deck A has been playing since we started with the tutorials, and it might happen that the playback reaches the end of the track. In this case, just do the following:
â–ş On the left Deck, press Pad 1 to skip back to the beginning of the track.
You can then resume from where you left off.
TRAKTOR KONTROL S8 - Manual - 47
Using Your S8—Getting Started
Mixing In a Second Track
2.5.6
Mixing In the Track by Using the Channel EQ and Filter
Besides simply using the Crossfader or channel volume faders to mix tracks, you can use
TRAKTOR KONTROL S8’s EQs and filters to make the mixes smoother and more interesting.
The EQ and FILTER knobs on channel B.
Prerequisites
We assume here that you have already followed the instructions in the previous tutorials and the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A. The track is playing and audible.
â–Ş The track “Techno 2” is loaded on Deck B. The track is playing and audible.
TRAKTOR KONTROL S8 - Manual - 48
Using Your S8—Getting Started
Mixing In a Second Track
â–Ş Both tracks are synched.
â–Ş The Crossfader is all the way to the left.
â–Ş On channel B, the channel fader is set to minimum, the EQ knobs, the GAIN knob, and the
Filter knob are set to center position.
To prepare the cued track with EQ or Filter:
1.
Put on your Headphones.
2.
Enable CUE on channel B.
3.
Press the FILTER button on Deck B.
TRAKTOR KONTROL S8 - Manual - 49
Using Your S8—Getting Started
Mixing In a Second Track
4.
Turn any of the EQ or FILTER knobs on channel B to hear the effect on the cued track.
The EQs and filters are excellent tools for making adjustments to tracks before mixing them in so that you get the smoothest transition possible. The most common technique is to filter the bass line out of the incoming track—having 2 bass lines running simultaneously rarely sounds good.
We will now carry out a first version of the mix “for real.” Thus, turn the CUE MIX knob fully clockwise to hear the main mix in your headphones (or put off your phones and listen to your mix coming through your amplification system).
Do the following:
TRAKTOR KONTROL S8 - Manual - 50
Using Your S8—Getting Started
Mixing In a Second Track
1.
With the Crossfader still on the left, turn down the LOW knob on channel B to take the bass out of the track on Deck B.
2.
Progressively mix in channel B by gradually moving the Crossfader from the left to the center position.
3.
When both tracks are running together and you want to bring the bass back in, gradually decrease the bass amount of channel A while simultaneously increasing that of channel
B.
4.
Complete the transition by gradually moving the Crossfader all the way to the right.
→ You did your first mix using EQs and Filters of your TRAKTOR KONTROL S8.
TRAKTOR KONTROL S8 - Manual - 51
Using Your S8—Getting Started
Adjusting Levels
2.6
Adjusting Levels
Before we continue with the tutorials, let's talk about the importance of setting your mix levels correctly. We will provide a few simple hints which help you achieve the best sound with your mix.
Even if this section looks a bit technical at first, please take the time to read these few pages, as this knowledge will help you later on, especially in a live situation!
2.6.1
The Theory
By mixing, you blend together (and process) signals coming from multiple sound sources. The mix is almost always louder than a single source. So it's important to keep levels within a safe range.
As a basic rule, you will want to avoid signal clipping, while keeping them loud enough so you use the full dynamic range available.
â–Ş If your signal exceeds the specified limits, it can't get any louder, but the sound quality is degraded by digital distortion, called clipping. Clipping leads to scratchy, unpleasant noises being added to the loudest signals in your mix. Although the music may appear louder overall, it will lose its impact. Speakers will suffer from this—and so will your audience!
(Also, be prepared for some annoyed sound technician or club owner coming down on you.)
â–Ş If, on the other hand, you mix with very low levels, you will encounter the other extreme; an elevated noise floor, especially apparent in quiet sections of your performance.
Hence, you should always make sure that your signals stay in the safe range.
2.6.2
In Practice
To assist you in adjusting levels, S8's Mixer is equipped with various level meters and controls.
Each level meter consists of a range of blue LEDs, indicating the safe signal range, along with an orange LED at the top indicating the clipping.
TRAKTOR KONTROL S8 - Manual - 52
Using Your S8—Getting Started
Adjusting Levels
A channel meter clipping
In each channel, ensure that its channel meter shows a level in the upper range of the blue
LEDs when playing the loudest section of a track, only occasionally reaching the orange LEDs.
Letting your levels go “in the red” (or orange in this case) and using signal clipping to make your mix sound dirtier is definitely not recommended: to do this, make use of TRAKTOR's great
FX selection instead!
Checking the Level on Each Channel
Each channel on the Mixer provides you with a vertical channel meter next to the fader. This meter shows you the pre-fader level of the signal on that channel, i.e. the level of the signal before it is adjusted by the channel fader. To adjust this level, use the GAIN knob at the very top of the channel:
The GAIN knob sits at the top of each channel
â–ş Adjust the channel’s GAIN knob so that the level displayed on the channel meter stays in the upper part of the blue area without reaching the orange clipping LED.
TRAKTOR KONTROL S8 - Manual - 53
Using Your S8—Getting Started
Adjusting Levels
Note that the channel’s EQ and filter settings also affect the signal level, as well as the possible FX Unit(s) it is assigned to. Hence, when modifying any of these, you might need to readjust the GAIN knob accordingly.
To get a good idea of the right levels to choose, we recommend you get to know the songs in your set - for tracks with a variable level over time (e.g. a track starting with a soft intro), you should base the level settings on the loudest section of the track.
Matching Levels Between Channels
Moreover, in order to avoid an audible level jump when cross-fading between two channels, the perceived channel levels should match:
â–ş Before mixing in a cued channel, adjust its GAIN knob so that its channel meter activity roughly matches that of the channel currently on air.
TRAKTOR already does this for you by automatically applying a level balance value for each newly loaded track. This so-called “Autogain” feature relies on the gain values extracted from your tracks. Despite this automatism, depending on the particular EQ, filter and FX applied to the cued track, you may want to double-check the level consistency before you mix in the track. Moreover, what is important here is the perceived loudness of the specific part of the track that you’re about to mix in.
Checking the Main Level in TRAKTOR
The signals coming from all channels are mixed together according to the relative levels determined by the channel faders and by the Crossfader. This mix is then sent from TRAKTOR’s main output to the Main section:
The Main section on your S8
TRAKTOR KONTROL S8 - Manual - 54
Using Your S8—Getting Started
Switching Deck Focus
In this section, the MAIN LEVEL meters show you the (left and right) overall level of your mix after adjustment by the MAIN knob. Here, again, make sure not to exceed the safe range indicated by blue LEDs too often.
For checking the level at the output of the TRAKTOR software, please refer to the meter in
TRAKTOR's header. Set the channel levels so that the mix mostly stays in the blue safe range on the MAIN meter.
The MAIN meter showing too high levels in TRAKTOR's header.
By default, a limiter is enabled on TRAKTOR’s main output. With this limiter enabled, the
MAIN LEVEL meters’ clipping LEDs will cease to indicate clipping, but instead indicate when the limiter kicks in. While the limiter prevents distortion inside TRAKTOR, the resulting contraction of the dynamic range cannot be undone. Therefore, even with the limiter enabled, ensure that the clipping LEDs don’t light up too often!
Setting the correct level on S8
Once correct levels are set in TRAKTOR, you can concentrate on working on the S8. Use the
MAIN knob to set the volume going to the speakers, again, so that your mix isn't clipping.
If turning up S8's MAIN knob doesn't give you satisfying levels, please check the channel faders—they are probably set too low.
2.7
Switching Deck Focus
Although you can mix four TRAKTOR Decks with the S8, it is only possible to have the focus on two of the Decks simultaneously. To access the respective other Decks, you have to switch the Deck focus. In this example, toggle between Decks A and C by the following action:
TRAKTOR KONTROL S8 - Manual - 55
â–ş Press the left DECK button to toggle between Deck A and Deck C.
Using Your S8—Getting Started
Switching Deck Focus
TRAKTOR KONTROL S8 - Manual - 56
Using Your S8—Getting Started
Switching Deck Focus
â–Ş If Deck A is focused, the DECK button, the Mode Select Button and the LED ring around the LOOP encoder will be lit in blue.
TRAKTOR KONTROL S8 - Manual - 57
Using Your S8—Getting Started
Switching Deck Focus
â–Ş If Deck C is focused, the DECK button, the Mode Select Button and the LED ring around the LOOP encoder will be lit in white.
TRAKTOR KONTROL S8 - Manual - 58
Using Your S8—Getting Started
Switching Deck View and Zooming
2.8
Switching Deck View and Zooming
By default, the display shows only the focused Deck. This is called Single View. Additionally, you can switch to Spilt View to show both Decks together in the display - Decks A and C on the left side, Decks B and D on the right side. The display focused on just one Deck has the following appearance:
Deck A in Single View
â–ş Press the View button located in the top-right corner of the display area to toggle Deck
View between Single View and Split View.
→ The display now shows both Decks in Split View.
The focused Deck always acquires the majority of space in the display.
TRAKTOR KONTROL S8 - Manual - 59
Using Your S8—Getting Started
Switching Deck View and Zooming
Split View with focus on Deck A.
Split View with focus on Deck C.
Changing Deck View does not change the Deck's focus.
TRAKTOR KONTROL S8 - Manual - 60
Using Your S8—Getting Started
Switching Deck View and Zooming
Zooming
To get a more precise view of the waveform at the current Playhead position, you can zoom in or out of the waveform.
To zoom into the waveform:
â–ş Press Display button 3 repeatedly until you reach the desired zoom level.
To zoom out of the waveform:
TRAKTOR KONTROL S8 - Manual - 61
Using Your S8—Getting Started
Using Cue Points
â–ş Press Display button 4 several times until you reach the desired zoom level.
2.9
Using Cue Points
This tutorial will explain how to work with HotCues for jumping directly to certain points within a track. HotCues can be assigned to the pads when the Track Deck is in HOTCUE mode.
On a Track Deck in HOTCUE mode, pad 1 always represents the Start Cue Point that will be assigned automatically as soon as a track is loaded. The remaining pads can be assigned with further HotCues, as explained in the following section.
TRAKTOR KONTROL S8 - Manual - 62
Using Your S8—Getting Started
Using Cue Points
Pad 1 as Start Cue Point.
Prerequisites
We assume here that you already followed the instructions in the previous tutorials (see
Enabling Decks ). TRAKTOR KONTROL S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A.
â–Ş The Deck A is set to HOTCUE mode (default state).
2.9.1
Setting and Deleting Cue Points (HotCues)
To set Cue Points within a track:
TRAKTOR KONTROL S8 - Manual - 63
Using Your S8—Getting Started
Using Cue Points
â–ş On the left Deck, whether or not the track is playing, press one of the unlit pads on a downbeat—let’s say pad 2. The pad lights up blue.
→ You have just stored a Cue Point that you can return to by pressing the same pad again.
â–ş In the display, a CuePoint will be highlighted by a blue indicator and the pad number.
You can store up to eight CuePoints per track, including the first which is automatically set to the track start.
The highlighted CuePoint in the display.
To delete a Cue Point:
TRAKTOR KONTROL S8 - Manual - 64
Using Your S8—Getting Started
Using Cue Points
â–ş Press SHIFT + the pad assigned with a Cue Point.
→ The Cue point is deleted and the pad is unlit.
Snapping to the Beats
You don’t have to worry about being precise enough to set a HotCue directly on a beat; by default, TRAKTOR will make sure this happens automatically. This is because the Snap mode is on, indicated by the lit S button located in the top-mid on the S8:
The S button on the Mixer.
With Snap mode on, any HotCue you set in the track will snap to the closest beat, thus ensuring that recalling a CuePoint will always trigger a downbeat.
2.9.2
Aligning Tracks using HotCues
Aligning both tracks is straightforward:
1.
Make sure that Deck B is playing.
1.
When you hear a downbeat in the other track, press the pad with the HotCue you just used to store the downbeat position.
→ The playback position on Deck B jumps to the stored Cue Point, and the playback continues from there. Both tracks now are perfectly aligned and ready to be mixed.
2.10 Adjusting Tempo
In this tutorial you will learn how to adjust the tempo of a track and the global tempo. The S8 doesn't feature a dedicated tempo fader per Deck which you might expect of a conventional DJ controller. Instead, the S8 offers a new approach to controlling the tempo of your mixes described in the following section.
TRAKTOR KONTROL S8 - Manual - 65
Using Your S8—Getting Started
Adjusting Tempo
Prerequisites
We assume here that S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and stopped.
â–Ş The track “Techno 2” is loaded on Deck B and stopped.
â–Ş The tracks are not in sync.
2.10.1 Global Tempo Adjustments
Global tempo adjustments are made using the TEMPO encoder located in the center of the S8.
The TEMPO encoder on the S8
Turning the TEMPO encoder will adjust the tempo of the assigned MASTER deck, along with any other decks that have their SYNC buttons active. You can adjust the tempo in whole steps or in decimal steps.
TRAKTOR KONTROL S8 - Manual - 66
Adjusting the Global Tempo
1.
Press the PLAY button on Deck A. The Deck will be assigned to MASTER .
Using Your S8—Getting Started
Adjusting Tempo
2.
Turn the TEMPO encoder clockwise or counterclockwise to increase or decrease the tempo of TRAKTOR's Master Clock in decimal steps.
TRAKTOR KONTROL S8 - Manual - 67
Using Your S8—Getting Started
Adjusting Tempo
3.
Press any SHIFT button and turn the TEMPO encoder clockwise or counterclockwise to increase or decrease the tempo of TRAKTOR's Master Clock in whole steps.
4.
Release the Deck's SHIFT button.
→ The global tempo has changed.
2.10.2 Deck-specific tempo adjustments
Deck-specific tempo adjustments can be made by using BPM mode which will be enabled on the Decks and the BROWSE encoders:
TRAKTOR KONTROL S8 - Manual - 68
Adjusting the Deck-specific Tempo
1.
On a Deck press the Display Button 1.
The BPM pop-up becomes visible on the display.
Using Your S8—Getting Started
Adjusting Tempo
TRAKTOR KONTROL S8 - Manual - 69
Using Your S8—Getting Started
Adjusting Tempo
2.
Turn the Deck's BROWSE encoder clockwise to increase the tempo; turn the Deck's
BROWSE encoder counterclockwise to decrease the tempo.
3.
Hold the Deck's SHIFT button + turn the Deck's BROWSE encoder clockwise to increase the tempo in whole steps; turn the Deck's BROWSE encoder counterclockwise to decrease the tempo in whole steps.
4.
Press the Display Button 1 again or press the View Button to close the BMP pop-up.
→ The Deck-specific tempo has changed.
TRAKTOR KONTROL S8 - Manual - 70
Using Your S8—Getting Started
Using Keylock
In this scenario, the BROWSE encoder has the same effect as the TEMPO encoder when making tempo adjustments. If the Deck is assigned as the MASTER , tempo adjustments made with the BROWSE encoder will also be applied to any other Deck with their SYNC button activated.
In scenarios where automatic Deck synchronization isn't possible, e.g. syncing a TRAK-
TOR Deck with an external audio source, you can use this method to manually dial in a
Deck's BPM .
2.11 Using Keylock
When synchronizing tracks, you end up altering at least one track's tempo, which consequently changes their pitch (or key). For small tempo adjustments, this mostly isn't going to be an issue; but when the tempo is changed more significantly, the resulting pitch change might sound unsuitable: kick sounds would lose their impact, vocals would sound unrealistic, harmonic instruments would become dissonant when mixed, etc. To avoid issues like these,
TRAKTOR provides the Keylock feature which uncouples the pitch and the tempo of a track.
This allows you to basically lock the pitch while adjusting the tempo or vice versa. In order to activate Keylock from the S8, do the following:
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and playing.
Adjusting the Tempo and preserving the Original Pitch
If you want to mix a track in its original key to another track with a faster tempo, you need to lock the key before adjusting the tempo of the track:
TRAKTOR KONTROL S8 - Manual - 71
Using Your S8—Getting Started
Using Keylock
1.
On a Deck, press the Display Button 2.
The KEY pop-up opens on the display. For tracks which have been analyzed by TRAKTOR, their key is displayed here.
TRAKTOR KONTROL S8 - Manual - 72
Using Your S8—Getting Started
Using Keylock
2.
Press the Deck's BROWSE encoder to enable Keylock on the track. LOCK is now lit in white.
3.
Press the Display Button 2 again to exit the KEY pop-up in the display.
4.
Now press Display Button 1 to open the BPM pop-up and adjust the track's tempo by turning the BROWSE encoder.
→ You can hear the tempo change, but the track's key remains intact.
TRAKTOR KONTROL S8 - Manual - 73
Using Your S8—Getting Started
Using Keylock
Adjusting the Key without changing Original Tempo
If you want to change just the key of a track without affecting its tempo, proceed as follows:
1.
On a Deck, press the Display Button 2.
The KEY pop-up opens on the display. If the track has been analyzed by TRAKTOR, its key will be displayed here.
TRAKTOR KONTROL S8 - Manual - 74
Using Your S8—Getting Started
Using Keylock
2.
Press the Deck's BROWSE encoder to enable Keylock on the track. LOCK is now lit in white.
3.
Now turn the Deck's BROWSE encoder to adjust the key of the track.
4.
Press the Display Button 2 again to exit the KEY window in the display.
→ You will hear that the track's key has changed, while the tempo is preserved.
TRAKTOR KONTROL S8 - Manual - 75
Using Your S8—Getting Advanced
Using Touch Strip
3 Using Your S8—Getting Advanced
3.1
Using Touch Strip
S8 doesn't feature the conventional Jog Wheels of a regular DJ controller. Functions usually associated with Jog Wheels are instead controlled by the intuitive Touch Strips. Each of S8's
Deck sections contains a Touch Strip, which always control just the focused Deck, indicated by the DECK button's backlight color; Blue indicates a focus on a primary Deck (Decks A or B), white indicates a focus on a secondary Deck (C or D). This tutorial explains how to use the
Touch Strip for the following actions:
â–Ş Seek/navigate through the entire track.
â–Ş Tempo bend (nudge).
â–Ş Scratching, backspinning and holding.
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and is not playing.
â–Ş The Crossfader is set all the way to the left.
â–Ş The channel fader A is raised to the top.
â–Ş The MAIN knob is set at an adequate level.
3.1.1
Using Touch Strip to Seek
1.
On the left Deck, press the PLAY button.
TRAKTOR KONTROL S8 - Manual - 76
Using Your S8—Getting Advanced
Using Touch Strip
2.
While holding the Deck's SHIFT button, the LED strip above the recessed touch-sensitive area will display this:
The LED segments represent the entire length of the track. The three orange segments represent the current playhead position within the track.
TRAKTOR KONTROL S8 - Manual - 77
Using Your S8—Getting Advanced
Using Touch Strip
1.
While holding SHIFT , place your finger on the Touch Strip beneath the orange LEDs and swipe to the right to move forwards in the track's waveform.
TRAKTOR KONTROL S8 - Manual - 78
Using Your S8—Getting Advanced
Using Touch Strip
⇨ The three orange LEDs will follow your finger movement to the right, as does the playhead in the waveform.
TRAKTOR KONTROL S8 - Manual - 79
2.
Swipe your finger to the left to move backwards in the track's waveform.
Using Your S8—Getting Advanced
Using Touch Strip
TRAKTOR KONTROL S8 - Manual - 80
Using Your S8—Getting Advanced
Using Touch Strip
⇨ The three orange LEDs will follow your finger movement to the left, just as the playhead in the waveform.
Alternatively, you can jump directly to an absolute position in the track by pressing
SHIFT + placing your finger on the desired position on the Touch Strip.
3.1.2
Using Touch Strip to Nudge/Pitchbend
Traditional DJ's who don't have an automatic Sync function at hand are used to physically nudging, twisting, and tweaking a conventional turntable with either Timecode vinyl or traditional vinyl to temporarily speed up or slow down a track and align the beats manually. The S8 allows you to work in a similar way by using the Touch Strip:
The LEDs above the Touch Strip provide visual information about a Deck's phase alignment.
They help you make the necessary tempo bend adjustments to get your tracks aligned.
The following tutorial will demonstrate how to manually beatmatch the two demo tracks "Techno 1" loaded on Deck A and "Techno 2" loaded on Deck B by means of the Touch Strip, without using the Sync function.
First step: Playing the Tracks
1.
On Deck A press the PLAY button to start playback. The Deck will be assigned to MAS-
TER .
TRAKTOR KONTROL S8 - Manual - 81
Using Your S8—Getting Advanced
Using Touch Strip
2.
On Deck B press the SYNC button to disable Sync. The SYNC button's backlight goes dim.
3.
Listen to the track playing in Deck A , and press the PLAY button of deck B on an appropriate downbeat to start playback.
→ If your timing was perfect, a single orange LED at the center of the LED strip lights up, indicating the phase-alignment of both tracks is correct.
If your timing was a little off, a few blue LEDs above the Touch Strip light up, indicating the amount of phase-misalignment.
Second Step: Correcting phase-alignment
To correct the phase-alignment of both tracks, proceed as follows:
If blue LEDs are shown above the right side of the Touch Strip on the Deck not assigned to
MASTER:
â–ş Swipe your finger toward the left side of the Touch Strip until the blue LEDs disappear and a single orange LED is shown.
If blue LEDs are shown above the left side of the Touch Strip on the Deck not assigned to
MASTER:
TRAKTOR KONTROL S8 - Manual - 82
Using Your S8—Getting Advanced
Using Touch Strip
â–ş Swipe your finger toward the right side of the Touch Strip until the blue LEDs disappear and a single orange LED is shown.
→ The phase-alignment is corrected and both tracks are perfectly synched.
TRAKTOR KONTROL S8 - Manual - 83
Using Your S8—Getting Advanced
Using Touch Strip
3.1.3
Using the Touch Strip to Scratch and Backspin
Similar to manually turning a vinyl on a turntable, swiping a finger over the recessed Touch
Strip area allows you to create a scratch effect on a Track Deck or Remix Deck. This feature is not enabled by default and requires some configuration as follows:
Enabling the preference Touch to Scratch
To enable the preference Touch to Scratch for the S8:
1.
In the TRAKTOR window click File, then Preferences to open the preferences window.
TRAKTOR KONTROL S8 - Manual - 84
Using Your S8—Getting Advanced
Using Touch Strip
2.
Navigate to the Traktor Kontrol S8 page, check the Shift + Touch to Scratch preference in the Touchstrip section.
TRAKTOR KONTROL S8 - Manual - 85
Using Your S8—Getting Advanced
Using Touch Strip
3.
Click Close to exit the Preferences window.
Performing Scratching
On the Deck:
1.
Hold the SHIFT button.
2.
On the Touch Strip swipe to the left. This will move the playhead slightly forwards in the track's waveform, and you will hear the typical scratch effect.
TRAKTOR KONTROL S8 - Manual - 86
Using Your S8—Getting Advanced
Using Touch Strip
3.
On the Touch Strip swipe to the right. This will move the playhead slightly backwards in the track's waveform and you will hear the typical scratch effect.
TRAKTOR KONTROL S8 - Manual - 87
Using Your S8—Getting Advanced
Using Touch Strip
4.
Try moving your finger across the Touch Strip (back and forth) to scratch the corresponding playhead over a beat.
→ As soon as you cease moving your finger on the Touch Strip, the playhead remains at that position.
A scratch effect can only be created when the track is stopped.
Performing a Backspin
On the Deck:
1.
Hold the SHIFT button.
TRAKTOR KONTROL S8 - Manual - 88
Using Your S8—Getting Advanced
Using Touch Strip
2.
On the Touch Strip swipe quickly from the very right to the very left. This will move the playhead backward in the track's waveform, and you will hear the backspin effect.
→ As soon as you lift your finger from the Touch Strip, the playhead remains at that position.
Backspins are enhanced by the fact that TRAKTOR will stop the spin as soon as you release the SHIFT button.
TRAKTOR KONTROL S8 - Manual - 89
Using Your S8—Getting Advanced
Playing with Loops in HOTCUE Mode
3.2
Playing with Loops in HOTCUE Mode
Now that we've covered all basic mixing techniques and how to use the Touch Strip, we will focus on S8’s looping facilities in HOTCUE mode.
Besides using the dedicated LOOP mode which will be explained in the next tutorial, you can work with loops in default HOTCUE mode. This allows you to perform with HOTCUES and loops at the same time.
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and stopped.
â–Ş The Crossfader is all the way to the left.
â–Ş The channel fader A is raised to the top.
â–Ş The MAIN knob has an adequate level.
3.2.1
Engaging and Disengaging a Loop
Let’s add a loop to the track on Deck A.
To engage a loop on a Deck:
1.
Press the Deck's PLAY button to start playback.
2.
Press the Deck's HOTCUE button to enable HOTCUE mode.
3.
Press the Deck's Loop encoder. The LED ring around the Loop encoder starts to rotate to indicate the loop is activated.
TRAKTOR KONTROL S8 - Manual - 90
Using Your S8—Getting Advanced
Playing with Loops in HOTCUE Mode
→ This will automatically add a loop at the current playback position in the track.
The example above shows an engaged loop of four beats. You can change the loop size while the loop is active:
TRAKTOR KONTROL S8 - Manual - 91
â–ş Turn the Deck's Loop encoder to change the loop size.
Using Your S8—Getting Advanced
Playing with Loops in HOTCUE Mode
You can choose a loop size of 32 beats down to a loop size of 1/32 of a beat.
Note that you can adjust the loop size either before or after you’ve set the Loop! If you adjust the loop size beforehand, the next loop you set will acquire the set loop size value.
TRAKTOR KONTROL S8 - Manual - 92
Using Your S8—Getting Advanced
Playing with Loops in HOTCUE Mode
3.2.2
Moving a Loop
With a loop size selected, you can move the Loop selection to another position within your track.
To move the Loop:
â–ş Press the Deck's SHIFT button and turn the Loop encoder. The loop selection will be moved through the track on the fly and looping continues at the respective position.
The step size you move the selection by is the same as the loop size, which is shown in the display.
Turning the Loop encoder when there is no Loop active lets you jump backward/forward through the track by the same step size.
3.2.3
Storing a Loop
In a previous tutorial, you learned how to store Cue Points, which is as simple as pressing an unlit pad. Storing Loops works in a similar way. Let's say you have stored two HotCues in the track currently playing:
1.
Press the Loop encoder to engage a Loop.
TRAKTOR KONTROL S8 - Manual - 93
2.
To store the active Loop, press an unlit pad. The pad lights up green.
Using Your S8—Getting Advanced
Playing with Loops in HOTCUE Mode
TRAKTOR KONTROL S8 - Manual - 94
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
The display will show a green marker indicating the Loop. The marker also shows the number of the corresponding pad.
→ You have just stored a Loop that you can return to by pressing the same pad again.
Deleting a Loop
To delete a Loop:
â–ş Press the Deck's SHIFT button and the pad assigned to the Loop you want to delete.
3.3
Playing with Loops in LOOP Mode
LOOP mode offers a different set of control options for using loops on track Decks and Remix
Decks, which you will learn in the following tutorial.
When LOOP mode is activated, the top row of pads light up in green and the bottom row of pads light up in orange. The green pads represent four Loop sizes. The orange pads represent
Beatjump sizes.
TRAKTOR KONTROL S8 - Manual - 95
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
Pads illuminated in LOOP mode.
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and is not playing.
â–Ş The Crossfader is all the way to the left.
â–Ş The channel fader A is raised to the top.
â–Ş The MAIN knob has an adequate level.
3.3.1
Looping with Pre-defined Sizes
In LOOP mode, with the first row of pads you can engage loops with pre-defined values. By default, these are (from left to right) 1/8, 1/4, 1/2 or 1 beat.
To engage a loop:
1.
Press the Deck's PLAY button to start playback.
TRAKTOR KONTROL S8 - Manual - 96
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
2.
Press the Deck's LOOP button to enable LOOP mode.
The LOOP button lights up brightly and the pads also illuminate.
With a track playing and Loop mode enabled, you can perform the following actions:
â–ş Press one of the green pads to engage a Loop of 1/8 beat, 1/4 beat, 1/2 beat, or 1 beat.
The LED ring around the Loop encoder starts to rotate indicating a loop is engaged.
â–ş Press the same green pad again or press the Loop encoder to disengage the Loop.
â–ş While a loop is engaged, rotate the Loop encoder to alter the Loop's size. This will produce some interesting sound variations.
Loop sizes can be changed in TRAKTOR's software preferences: Preferences>TRAK-
TOR KONTROL S8>Loop Mode Sizes>Loop.
TRAKTOR KONTROL S8 - Manual - 97
Using Your S8—Getting Advanced
Playing with Loops in LOOP Mode
3.3.2
Beatjumping
With the orange pads, you can jump forward or backward in the track by the amount predefined as Beatjump size. By default, the orange pads 6 and 7 represent the Beatjump sizes of 1 beat backward and forward, whereas the beat-jump sizes of pad 5 and 8 are defined by the
Loop encoder.
To beat-jump within a track by 1 beat:
1.
Press the Deck's PLAY button to start playback.
2.
Press the Deck's LOOP button to enable LOOP mode.
The LOOP button lights up brightly and the pads also illuminate.
3.
Press pad 6 to jump back by 1 beat. If doing so causes the Playhead to cross the boundaries of an active Loop area, it continues to loop again.
4.
Press pad 7 to jump forward by 1 beat. If jumped out of a loop, playback continues as normal.
Beatjump sizes can be changed in TRAKTOR's software preferences: Preferences>TRAKTOR KONTROL S8>Loop Mode Sizes>Beatjump.
Using the Loop encoder to define Beatjump sizes in real time
By default, pad 5 and pad 8 skip position back and forward by the amount shown in the display as loop-size value. To change this value:
1.
Turn the Loop encoder to define a Beatjump size between 1/32 of a beat and 32 beats.
The Loop size will change in the display.
2.
Press pad 5 to jump the playback position backward by the loop-size value displayed on the display. If doing so causes the Playhead to jump into an active Loop area, it continues to loop again.
3.
Press pad 8 to jump the playback position forward by the beat-jump size defined in the display. If you jump out of a loop this way, playback continues outside the loop.
TRAKTOR KONTROL S8 - Manual - 98
Using Your S8—Getting Advanced
Using FREEZE Mode
3.4
Using FREEZE Mode
FREEZE mode takes the playhead position, adds the number of bars set as Freeze Slice Size and splits this section of a track into eight equally sized slices. These are then mapped to the adjacent pads, which light up blue. Press any of these pads to trigger playback from the mapped slice. Playback continues to the end of the track until you lift your finger off the pad.
In FREEZE mode, the numbers 1 - 8 are overlaid on the waveform to indicate the location of the slices. The first row of pads triggers slices 1 - 4, the second row triggers slices 5 - 8
FREEZE overlay in the display.
The pads are now lit blue, and the Freeze slices are shown on the track's waveform. The pad that is currently illuminated brightest represents the current playback position in the Freeze area (see the image above).
TRAKTOR KONTROL S8 - Manual - 99
Using Your S8—Getting Advanced
Using FREEZE Mode
Deck A in Freeze Mode.
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and stopped.
â–Ş The Crossfader is all the way to the left.
â–Ş The channel fader A is raised to the top.
â–Ş The MAIN knob has an adequate level.
3.4.1
Engaging Freeze mode on a track
On Deck A:
TRAKTOR KONTROL S8 - Manual - 100
Using Your S8—Getting Advanced
Using FREEZE Mode
1.
Press PLAY to trigger playback.
2.
Press the FREEZE button.
The current playback position is "frozen" and a section defined by the loop size on the display is automatically split into eight slices.
TRAKTOR KONTROL S8 - Manual - 101
Using Your S8—Getting Advanced
Using FREEZE Mode
3.
Press any of the eight pads to trigger playback and get a feel for the slices.
4.
Press the HOTCUE button to exit Freeze mode.
If no further slice is triggered, the Playhead position will leave the frozen area and playback continues towards the end of the track.
3.4.2
Adjusting the Freeze Slice Size
1.
Hold the FREEZE button.
The SLICE SIZE window pops up in the display.
TRAKTOR KONTROL S8 - Manual - 102
Using Your S8—Getting Advanced
Using FREEZE Mode
2.
While holding the FREEZE button, turn the Loop encoder to increase or decrease the slice size from a 1/4 of a beat to a range of 4 beats.
3.
Release the FREEZE button.
→ The Slice size and zoom will change accordingly.
TRAKTOR KONTROL S8 - Manual - 103
Using Your S8—Getting Advanced
Using FREEZE Mode
3.4.3
Slicer Mode
There's an extension of Freeze mode's functionality, called Slicer Mode. Press the Loop encoder while in Freeze mode and the playback behavior of the pads changes. Instead of playing from the slice start to the end of the entire track, pressing and holding a pad in Slicer Mode will play back just the corresponding slice repeatedly.
3.5
Using FLUX Mode
With FLUX mode activated, for every Deck, a second Playhead continues playing along the natural progression of a track, even if you loop a section, temporarily jump back to a cue point, skip forward or backward, etc. That way, the beat of a track keeps flowing, no matter what you do. These are the changes in FLUX mode compared to regular operation:
â–Ş HOTCUE mode: press and hold a pad to play back from a cue point. When you let go, playback resumes at the second Playhead's position instead of continuing from the cue point.
â–Ş LOOP mode: when leaving a loop, playback will continue at the position of the second
Playhead instead of the loop end position
â–Ş FREEZE mode: press and hold a pad to play back from a cue point. When you let go, playback resumes at the second Playhead's position instead of continuing playback from the cue point.
Prerequisites
We assume here that the S8 is in the following state:
â–Ş The track “Techno 1” is loaded on Deck A and stopped.
â–Ş The Crossfader is all the way to the left.
â–Ş The channel fader A is raised to the top.
â–Ş The MAIN knob has an adequate level.
Enabling Flux Mode
To enable Flux mode within HOTCUE mode, LOOP mode, or FREEZE mode on Deck A:
TRAKTOR KONTROL S8 - Manual - 104
Using Your S8—Getting Advanced
Remixing with Remix Decks
1.
Press the PLAY button to start playback.
2.
Press the FLUX button to enable FLUX mode. The button lights up in orange.
3.
Perform on the pads as usual. As soon as a pad is released, playback continues at the second Playhead's position to preserve the musical phrasing.
4.
Press the FLUX button again to exit FLUX mode.
Note that when the FLUX button is engaged, you cannot make use of Slicer mode on the pads.
Perform a backspin effect for two Beats using FLUX mode
If the option Touch to Scratch is enabled in the TRAKTOR Preferences you can perform a backspin effect for two beats by using FLUX mode:
1.
Press the FLUX button to enable FLUX mode.
2.
Hold the SHIFT button, and swipe quickly from the very right to the very left on the Touch
Strip.
3.
Two beats later, release the SHIFT button.
→ The Backspin will stop and normal playback will resume right on the beat you desire.
3.6
Remixing with Remix Decks
In the previous tutorials you learned how to mix using the Track Decks and how to work with some advanced functionalities of the S8. In this tutorial, you will learn how to use the Remix
Decks. With the Remix Decks you can play and perform with pre-defined Remix Sets as well as create your own Remix Sets by capturing samples of tracks.
TRAKTOR KONTROL S8 - Manual - 105
Using Your S8—Getting Advanced
Remixing with Remix Decks
Prerequisites
â–Ş Deck C is enabled.
â–Ş Channel C fader is set to minimum.
â–Ş All Remix Slot Volume Faders of the left Deck are raised.
â–Ş The EQ knobs of channel C are set to center position.
â–Ş The MAIN knob is set to an adequate output level.
â–Ş The Channel C Crossfader Assign switch is set to the left position.
â–Ş The Crossfader is all the way to the left.
3.6.1
Loading a Remix Set
1.
On the left Deck, press the DECK button to switch to Deck C . Remix Deck C should be shown in the left display.
1.
Press the BROWSE encoder to open the Browser.
2.
Navigate to the folder TRACK COLLECTION > All Remix Sets > Remix Deck Tutorial .
TRAKTOR KONTROL S8 - Manual - 106
Using Your S8—Getting Advanced
Remixing with Remix Decks
3.
Select the Remix Set Remix Deck Tutorial and press the BROWSE encoder to load it.
TRAKTOR KONTROL S8 - Manual - 107
Using Your S8—Getting Advanced
Remixing with Remix Decks
→ The Remix set is loaded to Deck C. The display has the following appearance:
The pads now illuminate orange and green, corresponding to the Remix Deck page shown in the display.
3.6.2
Triggering Samples
For a demonstration of how a Remix Deck works, please perform the actions listed below in the following order:
TRAKTOR KONTROL S8 - Manual - 108
Using Your S8—Getting Advanced
Remixing with Remix Decks
1.
Press pad 1 to trigger its Sample Intro Beat . Playback of the Deck will start accordingly.
The Sample is highlighted, the Playhead of its waveform moves, and the Sample will loop.
2.
Raise the channel C fader. You should now hear the Sample playing.
3.
Press SHIFT + pad 1 to stop playback.
4.
Now press pad 1, pad 2, pad 3, and pad 4 to trigger their samples.
TRAKTOR KONTROL S8 - Manual - 109
Using Your S8—Getting Advanced
Remixing with Remix Decks
→ The first four pads light up.
The Samples play back.
Select another Sample of a Remix Slot
While the Samples are playing, you can switch to other Samples within the Remix Slots. For example:
TRAKTOR KONTROL S8 - Manual - 110
Using Your S8—Getting Advanced
Remixing with Remix Decks
â–ş Press pad 5. The Sample of pad 1 Intro Beat will stop and instead the Sample of pad 5
808 Deep will start without interruption.
The Sample of pad 5 808 Deep is highlighted in the display.
Note that only one Sample per Remix Slot (column in the display) can play at a time.
Select other Pages of a Remix Set
A Remix Set can include up to 64 samples. On the S8 controller, the Remix Set is split into eight pages where each set of eight samples is stored.
TRAKTOR KONTROL S8 - Manual - 111
To select another page of a Remix Set:
â–ş Press Display Button 4 or 3 to scroll a page downwards or upwards.
Using Your S8—Getting Advanced
Remixing with Remix Decks
Alternatively, hold the REMIX button while turning the Deck's LOOP encoder.
TRAKTOR KONTROL S8 - Manual - 112
3.6.3
Triggering Samples using Different Quantize Sizes
1.
Press Display Button 2.
Using Your S8—Getting Advanced
Remixing with Remix Decks
The QUANTIZE window opens in the display.
TRAKTOR KONTROL S8 - Manual - 113
Using Your S8—Getting Advanced
Remixing with Remix Decks
2.
Turn the Decks's BROWSE encoder to select a quantize value of 16 beats.
3.
Press Display Button 2 again to close the QUANTIZE window. The quantize value is visible in the display.
4.
Now press the pads to trigger samples.
→ After you press a pad, TRAKTOR will play out the currently playing sample to the end of the 16 beats segment and then start playing back the sample assigned to the pad you pressed. If you selected a quantize size of 8 beats, TRAKTOR will finish the currently playing 8 beats segment before playback of the new sample commences.
TRAKTOR KONTROL S8 - Manual - 114
Using Your S8—Getting Advanced
Remixing with Remix Decks
It's a good idea to experiment with Quantize Values. Depending on the scenario, you will often want to keep the values long (four beats, eight beats, or even longer) to keep your musical phrases synced up. But for rapid changes between sounds, and a more "active" remixing, try for values of one beat or less.
3.6.4
Adjusting Levels and using Filters of Remix Slots
You can adjust the output levels of the Remix Slots to balance out differences in volume or to fade in our fade out samples smoothly:
â–ş Move the Slot Volume faders slowly upwards or downwards to fade in or fade out samples smoothly.
You can adjust the output levels of the Remix Slots to balance out differences in volume or to fade in our fade out samples smoothly:
â–ş Move the Slot Volume faders slowly upwards or downwards to fade in or fade out samples smoothly.
TRAKTOR KONTROL S8 - Manual - 115
Using Your S8—Getting Advanced
Remixing with Remix Decks
â–ş Experiment with the FILTER and adjust channel faders to get a feeling for the mix.
3.6.5
Using the Touch Strip on a Remix Deck
In this brief tutorial we'll learn how the Touch Strip can be used with the Remix Deck.
On a Remix Deck which isn't playing a track:
â–ş Swipe on the Touch Strip to move the playhead positions within the active Samples.
Swiping toward the right will move the Remix Slot playhead position in the current Remix
Deck row backward; swiping toward the left will move the Remix Slot playhead position forward.
Just like Track Decks the Remix Decks can become out-of-phase at times, even when they have their corresponding SYNC button engaged. The Touch Strip provides you with immediate visual feedback (via its LEDs) to allow you to make necessary adjustments.
You cannot use the Touch Strip for seeking functions on a Remix Deck.
On a Remix Deck which isn't playing a track:
â–ş Swipe along the Touch Strip to tempo bend.
â–ş Hold the SHIFT button, and swipe from right to left to backspin the Samples.
â–ş Hold the SHIFT button, and hold your finger on the Touch Strip to hold the Samples.
The SHIFT -behavior is always the same on Remix Decks regardless if the option Touch to
Scratch is disabled in TRAKTOR's Preferences.
3.7
Capturing Samples from Track Decks (Using Remix Mode)
You can create your own Remix Sets by capturing (or sampling) parts of a track playing back on a Track Deck.
TRAKTOR KONTROL S8 - Manual - 116
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
Note: in Remix mode, you can only capture Samples to the current Remix Set Page. Before you start capturing select another Remix Set Page.
The Capture Source must always be a Track Deck.
Prerequisites
â–Ş The track “Techno 1” is loaded on Deck A and stopped.
â–Ş Deck C is set up as an empty Remix Deck.
â–Ş All Remix Slot Volume Faders are raised to the top.
â–Ş The Crossfader is set to center position.
â–Ş Channel faders A and C are raised to the top.
â–Ş The EQ knobs are set to center position.
Capturing a Sample and Playback
To capture a Sample of a track on Deck A:
1.
Set the focus on Deck A .
2.
Hold the CAPTURE button. The LED ring around the Loop encoder starts to lit alternating in white and blue.
TRAKTOR KONTROL S8 - Manual - 117
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
3.
While holding CAPTURE , touch the Loop encoder to let the CAPTURE window pop-up and turn the Loop encoder to select the capture Source DECK A .
4.
Release the Loop encoder to close the CAPTURE window and release the CAPTURE button.
TRAKTOR KONTROL S8 - Manual - 118
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
1.
Press the REMIX button to enable REMIX Mode.
The pads should now be unlit because nothing is loaded into Remix Deck C .
TRAKTOR KONTROL S8 - Manual - 119
2.
Press the View button to switch to Split View.
Both Decks A and C are shown in the display.
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
3.
Turn the Loop encoder to define the capture size.
4.
On Deck A press the PLAY button to start playback.
5.
Press one of the unlit pads to capture a Sample from the current playback position.
TRAKTOR KONTROL S8 - Manual - 120
→ You have captured a Sample of the track.
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
The pad now illuminates a new color and the captured Sample is shown in the display.
Playback of Captured Samples from a Track Deck
As soon a Sample is captured, you can perform the following actions:
TRAKTOR KONTROL S8 - Manual - 121
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
â–ş Capture further Samples from another Capture Source and/or using another Capture size.
The pads now illuminate with new colors and the first four captured samples are shown in the display.
TRAKTOR KONTROL S8 - Manual - 122
Using Your S8—Getting Advanced
Capturing Samples from Track Decks (Using Remix Mode)
â–ş Press the illuminated pads to trigger playback. The Samples are now being mixed with the track playing in deck A . The Samples will continue to loop within their Remix Slot.
â–ş Move the Slot Volume Faders above the pads to smoothly fade the Samples out or in.
â–ş Hold the SHIFT button and press the illuminated pad to stop playing.
You can save a new Remix Set by clicking on the corresponding Deck letter in the
TRAKTOR software and selecting Save Remix Set . Rename the set by clicking on the
Deck header where New Remix Set is displayed. Saved Remix Sets will be added to:
BROWSER>TRACK COLLECTION>ALL REMIXSETS .
TRAKTOR KONTROL S8 - Manual - 123
Using Your S8—Getting Advanced
Adding FX
3.8
Adding FX
In this tutorial section, we will walk you through the basics of using the FX Units. By default,
TRAKTOR provides you with control over two FX Units, which can be assigned to any of the
Decks. You can set up two types of FX: Single FX and Group FX. The following sections will explain both.
3.8.1
Assigning Decks to the FX Units
To assign FX Unit 1 to a Deck:
â–ş On the mixer press the left FX Assign button of a channel to assign FX Unit 1 to a Deck.
The FX Assign button lights up brightly.
â–ş Press it again to unassign the Deck from FX Unit 1.
To assign FX Unit 2 to a Deck:
â–ş On the mixer press the left FX Assign button of a channel to assign FX Unit 2 to a Deck.
Press it again to unassign the Deck from FX Unit 2.
FX Unit 1 and 2 can be assigned to all four Decks simultaneously:
TRAKTOR KONTROL S8 - Manual - 124
Using Your S8—Getting Advanced
Adding FX
3.8.2
Setting up an FX Unit to Group FX Mode
When an FX Unit is set to Group FX mode, it allows up to three different audio effects to be used simultaneously within an FX Unit. The following section explains how to set up your own
Group FX, and how to control its three effects via the FX knobs and FX buttons.
Prerequisites
â–Ş The track "Techno 1" is loaded on Deck A. The track is playing and audible.
â–Ş All FX knobs of FX Unit 1 are set to center position.
Setting up an FX Unit to Group FX Mode
To load a Group FX into FX Unit 1:
1.
Press the FX SELECT button of FX Unit 1 at the top left of the S8.
The FX Unit 1 menu opens.
TRAKTOR KONTROL S8 - Manual - 125
2.
Press the FX Button 1 to display the FX Unit 1 options.
Using Your S8—Getting Advanced
Adding FX
3.
Turn the BROWSE encoder to select Group , and press the BROWSE encoder to enable
Group FX mode. Three default effects are loaded into the Group FX and the FX Unit is set up as Insert .
4.
Press the FX SELECT button again to exit the FX Unit menu.
TRAKTOR KONTROL S8 - Manual - 126
Using Your S8—Getting Advanced
Adding FX
Apply the Group FX to the Track
In order to apply the Group FX to the Track and control the parameters of each effect you can now perform the following actions:
â–ş Activate the effects slots with the FX buttons.
â–ş As soon you touch any FX knob, the FX panel will drop down in the display.
TRAKTOR KONTROL S8 - Manual - 127
Using Your S8—Getting Advanced
Adding FX
â–ş Experiment with the FX Knobs 1 to 4 and listen to the resulting changes. The parameter adjustments are also visible in the FX panel.
â–ş You can activate/deactivate each effect slot individually by pressing the corresponding FX buttons 2 to 4 below.
3.8.3
Exchanging effects in the Group FX
To exchange any of the effects slots in a Group FX setup:
TRAKTOR KONTROL S8 - Manual - 128
Using Your S8—Getting Advanced
Adding FX
1.
Press the FX SELECT button of FX Unit 1 at the top left corner of the S8 to open the FX
Unit menu.
2.
In the FX Unit menu, press FX Button 3 to exchange the effect in effects slot 2. An overview of available FX will be displayed.
TRAKTOR KONTROL S8 - Manual - 129
Using Your S8—Getting Advanced
Adding FX
3.
Turn the BROWSE encoder to select the Gater effect and press the BROWSE encoder to load it.
→ You have exchanged effects slot 2 in the Group FX. Repeat this process for any of the remaining effects in the Group FX.
3.8.4
Storing a Snapshot
You can save a default state for any of the effects by doing the following:
TRAKTOR KONTROL S8 - Manual - 130
1.
Adjust the FX knobs and buttons to your liking.
2.
Press the FX button 1 to display the FX Unit's options.
3.
Turn the BROWSE encoder to select Snapshot .
Using Your S8—Getting Advanced
Adding FX
4.
Press the BROWSE encoder to save the Snapshot.
→ The next time you press FX Button 1 with this effect loaded, its parameters will assume the values you stored.
3.8.5
Routing FX
TRAKTOR’s effects are insert effects by default, but you can also use them as post fader effects or as send effects.
â–ş To change FX Routing, either select Insert , Post Fader , or Send in the FX Unit's options.
3.8.6
Using Four FX Units
TRAKTOR provides you with a total of four FX Units. By default, only the first two FX Units are activated and can be controlled by the FX buttons and FX knobs above the display. You can activate FX Units 3 and 4 in the TRAKTOR Preferences, which are then controlled by the Performance knobs and buttons beneath the display.
TRAKTOR KONTROL S8 - Manual - 131
Enabling the 3rd and 4th FX Unit
To activate all four FX Units:
1.
Open TRAKTOR's Preferences dialog and select the Effects tab.
2.
In the FX Unit Routing section, enable 4 FX Units .
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
3.
Close the Preferences dialog.
Assigning FX Units 3 and 4
To route a channel to FX Unit 3 or 4:
â–ş Press the SHIFT button + the left FX assign to assign FX Unit 3 to the focused channel.
â–ş Press the SHIFT button + the right FX assign to assign FX Unit 4 to the focused channel.
3.9
Using Performance Modes on Remix Decks
The S8's Remix Decks provide you with Performance Modes, allowing you to send individual
Remix Slot channels to be processed by an effect/s. The Performance Modes are available for
Remix Decks only. By default the Performance Mode Filter is applied to the Performance Controls below the display.
TRAKTOR KONTROL S8 - Manual - 132
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
Prerequisites
â–Ş The Remix Set "Remix Set Tutorial" is loaded to Remix Deck C.
â–Ş FX Unit 2 is set to Single Mode and has the Reverb FX loaded.
â–Ş FX Unit 2 is assigned to Deck C.
3.9.1
Selecting and applying a Performance Mode
To select the FX SEND Performance Mode on Deck C:
1.
Set the Deck focus to Deck C.
2.
Press pads 2, 3 and 4 to trigger samples.
3.
Press the left Performance Mode button until the Display reads FX SEND just above the
Performance controls.
TRAKTOR KONTROL S8 - Manual - 133
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
4.
Press the ON buttons to activate/deactivate the FX SEND per Remix Slot. Turn the Performance knobs to control the mix between unprocessed and effect signals.
You can have all Performance Modes enabled simultaneously. Skip through the Performance Modes to check which modes are active.
3.9.2
Using Performance Mode Pitch
When Performance Mode Pitch is enabled:
1.
Touch a Performance knob to expand the PITCH parameters overview in the display.
TRAKTOR KONTROL S8 - Manual - 134
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
2.
Turn a Performance knob clockwise to pitch up or counterclockwise to pitch down the samples individually.
→ You will hear the result in the audio and see the values change in the PITCH parameters overview.
3.9.3
Using Performance Mode Filter
When Performance Mode Filter is enabled:
1.
Touch a Performance knob to enlarge the FILTER parameters overview in the display.
TRAKTOR KONTROL S8 - Manual - 135
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
2.
Turn a Performance knob clockwise to apply hi-pass filtering to the playing Sample. Turn a Performance knob counterclockwise to apply the low-pass filter to the playing Samples individually.
→ You will hear the result in the audio and see the values change in the FILTER parameters overview.
3.9.4
Using Performance Mode FX SEND
The Performance Mode FX SEND allows you to send signal from each Remix slot to the assigned FX Unit/s. In this case, Deck C is assigned to FX Unit 2, which is set up as a Reverb. As soon as the ON Buttons are enabled in this Performance Mode, the audio effect from FX Unit
2 should become audible.
When Performance Mode FX SEND is enabled:
TRAKTOR KONTROL S8 - Manual - 136
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
1.
Touch a Performance knob to expand the FX SEND parameters overview in the display.
2.
Turn the Performance knobs clockwise to increase or counterclockwise to decrease the FX
SEND amount.
→ You can hear a Reverb effect being added to the Remix Slots. Slot 1's value of 25% means that you're listening to a mix of 75% unprocessed signal and 25% Reverb.
TRAKTOR KONTROL S8 - Manual - 137
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
3.9.5
Using Performance Mode FX
The Performance Mode FX is only available if four FX Units are enabled in TRAKTOR's prefer-
ences as described in section ↑ 3.8.6, Using Four FX Units
.
With the Performance Mode FX enabled:
1.
Touch a Performance knob to enlarge the FX parameters overview in the display.
2.
Press the ON Buttons to enable the respective FX parameters.
TRAKTOR KONTROL S8 - Manual - 138
3.
Turn the Performance knobs to change the parameter values.
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
→ You will hear the result in the audio as well as see the changed values in the FX parameters overview.
3.9.5.1
Changing SINGLE FX in Performance Mode
In the following section you will learn how to change the SINGLE FX in the FX Unit 3 or FX
Unit 4. The workflow is the same for both. This tutorial will focus on FX Unit 3.
To change the SINGLE FX in FX Unit 3:
TRAKTOR KONTROL S8 - Manual - 139
1.
On FX Unit 1 press the FX SELECT button.
The FX Unit 1 menu opens.
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
2.
On the left Deck press the ON Button 1 to switch to FX Unit 3 options. The FX Unit 3 options will open in the display.
3.
Ensure the entries Single and Insert are selected.
TRAKTOR KONTROL S8 - Manual - 140
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
4.
Press the FX Button 2, 3 or 4 to change the FX. This will display the FX Unit 3 menu with available FX.
5.
Turn the BROWSE encoder to select any FX and press the BROWSE encoder to assign the
FX.
The FX Unit 3 menu closes.
TRAKTOR KONTROL S8 - Manual - 141
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
6.
Touch a Performance knob to enlarge the FX parameters overview in the display.
→ You can now see the newly assigned FX.
3.9.5.2
Changing GROUP FX in Performance Mode
In the following section you will learn how to change the GROUP FX in the FX Unit 3 or FX
Unit 4. The workflow is the same for both. This tutorial will focus on FX Unit 3.
To change the GROUP FX in FX Unit 3:
TRAKTOR KONTROL S8 - Manual - 142
1.
On FX Unit 1 press the FX SELECT button.
The FX Unit 1 menu opens.
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
2.
On the left Deck press the ON Button 1 to switch to FX Unit 3 options. The FX Unit 3 options will open in the display.
TRAKTOR KONTROL S8 - Manual - 143
3.
Select the entries Group and Insert .
Using Your S8—Getting Advanced
Using Performance Modes on Remix Decks
4.
Press the FX Button 2, 3 or 4 where you want to change the FX. This will display the FX
Unit 3 menu with available FX.
5.
Turn the BROWSE encoder to select an FX, and press the BROWSE encoder to load it.
TRAKTOR KONTROL S8 - Manual - 144
→ You have changed the FX in the Group FX.
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
3.10 Mixing Stem Files using Stem Decks
In this tutorial you will learn how to load and play back a Stem File, and how to perform on
Stem Decks.
Stem Files allow you to interact with four different musical elements of a track independently while DJing. The four stems of a track can be modified individually to create spontaneous instrumentals, remixes, or mashups. You can create transitions between elements stem-by-stem, or apply effects and EQ to just to a specific stem instead of the entire track. To get really creative, try swapping elements across multiple Stem Decks, for example, you could take the vocals from one track and mix it with the beat from another. Utilizing your S8, in combination with TRAKTOR, you can mix music at a deeper level.
Stem Files
A Stem File is a track in the file format .stem.mp4 that contains four audio tracks (Stem
Parts). Each Stem Part represents one of the key elements e.g. drums, percussions, synths, vocals, of the entire track. By default when a Stem File is played back in TRAKTOR all Stem
Parts are audible and result in an entire track.
TRAKTOR KONTROL S8 - Manual - 145
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
Due to the large amount of data that must be read from a Stem File, it is currently necessary that Stem Files are analyzed before loading into a Stem Deck. It is not possible to load and play a Stem File before it has been analyzed. For more information on how to analyze tracks or Stem Files, refer to the TRAKTOR Manual.
The Stem Deck
On the display of the TRAKTOR KONTROL S8 the Stem Deck looks identical to a conventional
Track Deck but showing the additional identifier STEM . Furthermore, the titles of the Stem
Parts are visible in the Performance mode pane.
The Stem Deck on the S8.
3.10.1 Loading and Playing a Stem File
Prerequisites
We assume here you already have imported and analyzed your Stem Files in your Track Collection and your TRAKTOR KONTROL S8 is in the following state:
â–Ş Decks A and B are focused and stopped.
â–Ş Channel faders A and B are set to the maximum level.
TRAKTOR KONTROL S8 - Manual - 146
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
â–Ş The Crossfader is set to center position.
â–Ş On the left Deck all Slot Volume faders are set to the maximum level.
â–Ş On the right Deck all Slot Volume faders are set to the minimum level.
Loading a Stem File
To load a Stem File into the left Deck A:
1.
Press the BROWSE encoder to open the Browser.
2.
Rotate the BROWSE encoder to navigate to TRACK COLLECTION > All Stems > .
TRAKTOR KONTROL S8 - Manual - 147
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
3.
Select a Stem File.
4.
Press the BROWSE encoder again to load the Stem File.
→ The Deck Flavor automatically switches to Stem Deck.
→ The Deck Flavor automatically switches to Stem Deck and the upper row of the Pads reflect the colors of the Stem Parts.
TRAKTOR KONTROL S8 - Manual - 148
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
Playback the Stem File
â–ş Press the PLAY button to start playback.
→ The Stem File is playing back and the waveform is moving in the display.
3.10.2 Switching between Track View and Stem View
To have an individual view of the Stem Parts’ waveforms switch the view in the display from
Track View to Stem View.
In Track View the display shows the waveform of the entire Stem File.
Stem Deck in Track View.
In Stem View the display shows the four colored waveforms of the Stem Parts.
TRAKTOR KONTROL S8 - Manual - 149
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
Stem Deck in Stem View.
To switch the view:
1.
Hold the SHIFT button. Depending on current view either Display Button 3 or 4 will light up.
2.
Press the unlit Display button to switch the view in the display.
TRAKTOR KONTROL S8 - Manual - 150
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
3.10.3 Performing with Stem Decks
While the Stem File is playing back you can perform the following actions on the Stem Deck:
Adjusting or Cutting Volumes of Stem Parts
To adjust the volumes of key elements from the music or to take them out completely:
â–ş Move the four Slot Volume Faders downwards or upwards.
→ You will hear the Stem Parts change in volume or they will be completely taken out of the mix.
Adjusting Volumes of Stem Parts
In order to adjust the volume of e.g. Stem Part 1:
1.
Press the Performance Mode buttons until the VOLUME page is selected in the Performance Mode pane.
TRAKTOR KONTROL S8 - Manual - 151
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
2.
Press Stem Selector 1 (the most left Pad) to select the corresponding Stem Part 1. The
Stem Selector Pad flashes indicating Stem Part 1 is selected.
The Footer in the display expands and the selected Stem Part name is underlined.
3.
Rotate the BROWSE encoder to adjust the volume of Stem Part 1.
TRAKTOR KONTROL S8 - Manual - 152
4.
Press the BROWSE encoder to reset the volume to maximum level.
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
5.
Press Stem Selector 1 again to unselect the corresponding Stem Part 1. The Stem Selector Pad is dim. The Footer in the display diminishes.
When all Stem Parts are selected you can adjust and reset the volumes of all Stem Parts simultaneously.
Applying FILTER to Stem Parts
To apply the FILTER to Stem Parts:
TRAKTOR KONTROL S8 - Manual - 153
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
1.
Press the Performance Mode buttons until the FILTER page is selected in the Performance Mode pane.
2.
Press the ON buttons to activate the filter.
3.
Rotate the respective Performance knob to change the parameters for applying a highpass or a low-pass filter.
Applying FX SEND to Stem Parts
You can also apply FX SEND to any of the Stem Parts.
TRAKTOR KONTROL S8 - Manual - 154
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
To apply the FX Unit’s FX to Stem Parts:
1.
On channel A press the right FX Assign button to assign the Stem Deck to FX Unit 2.
2.
Press the Performance Mode buttons until the FX SEND page is selected in the Performance Mode pane.
3.
Press the ON buttons to apply the FX of the FX Unit 2 to the Stem Parts.
4.
Rotate the Performance knobs clockwise to increase or counterclockwise to decrease the
FX SEND amount.
TRAKTOR KONTROL S8 - Manual - 155
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
Additional Information about Performing with Stem Decks
Besides the aforementioned actions for performing on Stem Decks you can also make use of setting Hotcues, applying Loops, using FREEZE mode, using FLUX mode, and using the Touch
Strip as you learned in previous tutorials.
It is not possible to capture Samples from Stem Files.
3.10.4 Adding another Stem File to the Mix
Equipped with the fundamental knowledge about performing on a Stem Deck you will now learn to mix Stem File on Deck A into another Stem File on Deck B.
3.10.4.1 Loading a Stem File into Deck B
To load a Stem File into the right Deck B:
1.
Press the BROWSE encoder to open the Browser.
2.
Turn the BROWSE encoder to navigate to TRACK COLLECTION > All Stems > .
TRAKTOR KONTROL S8 - Manual - 156
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
3.
Select a Stem File.
4.
Press the BROWSE encoder to load the Stem File. The Deck Flavor automatically switches to Stem Deck and is set to SYNC .
5.
Press the PLAY button to start playback.
→ The Stem File is playing back on Deck B and in sync with the Stem File on Deck A.
After all Slot Volume Faders are set to minimum position, you should not hear any audio from the Stem File of Deck B.
TRAKTOR KONTROL S8 - Manual - 157
Using Your S8—Getting Advanced
Mixing Stem Files using Stem Decks
3.10.4.2 Combining Sounds of different Stem Decks
While the Stem Files are playing back on Deck A and Deck B, you can now perform the following actions for mixing both Stem Files. We assume here that the Stem Parts of both of your chosen Stem Files are using the same naming and coloring scheme e.g. Stem Part 1 for drums, Stem Part 2 for bass, Stem Part 3 for melody, and Stem Part 4 for vocals.
Combining Sounds
To combine the Sounds of the Stem File on Deck A with the Sounds of the Stem File on Deck
B:
1.
On the right Deck move the Slot Volume Faders to the maximum position one by one. The
Stem Parts of both Stem Files are now audible in the mix.
2.
Lower and raise the Slot Volume Faders of both Stem Decks to combine the sounds of both Stem Files.
3.
On the left Deck move the Slot Volume Faders to the minimum position. You now hear the sounds of Stem File on Deck B only.
3.11 Using Step Sequencer Mode on Remix Decks
This sub-section describes the usage of Step Sequencer mode with the TRAKTOR KONTROL
S8.
The Step Sequencer mode is dedicated to the Remix Decks and allows you to program a pattern to be played by the focused sample on any Remix Slot. The amount of steps of the individual sequences can be defined between 1 and 16 steps. The default amount is set to 8 steps. The Step Sequencer is meant to be used with one-shot samples such as kick, snare, hihat, sound FX, etc. The usage of loops works too, but may not bring appropriate results.
Overview of Step Sequencer Mode in the Display
When Step Sequencer Mode is active, the display of TRAKTOR KONTROL S8 controller shows the following appearance:
TRAKTOR KONTROL S8 - Manual - 158
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
1
2
6 5 4 3
Overview of Step Sequencer Mode in the display.
(1) A STEP label appears next to the Remix Set's name indicating Step Sequencer mode is active.
(2) Each column displays the waveform of the selected sample and a grid of squares representing the amount of steps of the sequence.
(3) A rectangular frame around a sample waveform and the grid of squares indicates the focused sample.
(4) A colored square represents a step that has been set.
(5) A greyed out square represents an empty step.
(6) A white square represents the current playhead position of the sequence.
Pads Behavior
According to the display appearance the Pads behavior adapt consequently:
TRAKTOR KONTROL S8 - Manual - 159
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
â–Ş Each of the eight pads represent one step of the sequence.
â–Ş A pad will be dimmed in the color corresponding to the selected sample to indicate a step that is not set.
â–Ş A pad will be fully lit in the color corresponding to the selected sample to indicate a step that is set.
â–Ş An unlit pad indicates the step is not available. For example the amount of steps in the sequence is 7 steps, thus the 8th pad does not lit.
â–Ş A white lit pad represents the current playhead position in the sequence.
3.11.1 Activating Step Sequencer Mode
In order to activate Step Sequencer mode, you need to perform the following actions:
1.
In the TRAKTOR software assign a Deck i.e. Deck C to a Remix Deck .
⇨ The Deck’s Deck Flavor changes to Remix Deck. The Deck contains an empty Remix Set.
2.
On the TRAKTOR KONTROL S8 controller focus the Remix Deck accordingly.
3.
Press SHIFT + REMIX to activate Step Sequencer mode.
TRAKTOR KONTROL S8 - Manual - 160
⇨ The Deck switches to Step Sequencer mode.
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
4.
Load a Remix Set or fill the empty Cells with one-shot samples from your Track Collection.
5.
Start playback of the Deck.
TRAKTOR KONTROL S8 - Manual - 161
→ The Step Sequencer is ready for operation.
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
3.11.2 Operating the Step Sequencer
When Step Sequencer mode is active you can perform the following actions using your TRAK-
TOR KONTROL S8 controller:
Setting / Removing Steps
1.
Press a pad to set that step in the sequence.
TRAKTOR KONTROL S8 - Manual - 162
⇨ When the playhead reaches the step, the sample will play back.
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
2.
Press the pad again to remove the step from the sequence.
Switching the Sample Focus
1.
Press the Performance Mode buttons at the lower left / right area of the display to toggle between the samples.
2.
Alternatively, press SHIFT + Pad 1 to 4 to focus the corresponding sample.
→ The pads’ colors switch according to the sample color.
TRAKTOR KONTROL S8 - Manual - 163
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
Defining the Amount of Steps
1.
Turn the loop encoder to increase / decrease the amount of steps of the sequence.
2.
If you have set an amount greater than 8 steps, press Display Buttons 3 and 4 to navigate between upper and lower rows of steps.
Clearing all Steps of a Sample
â–ş Press SHIFT + EDIT to clear all steps in the sequence of the selected sample.
TRAKTOR KONTROL S8 - Manual - 164
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
Selecting another sample within the column
1.
Turn the Performance Knob 1 to select another sample stored in the same column of the
Remix Set.
⇨ The pads’ colors switch according to the sample color. If there is no other sample stored, turning the encoder has no effect.
2.
In order to prevent accidental switching,Step Sequencer press ON Button 1 to lock the sample.
TRAKTOR KONTROL S8 - Manual - 165
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
Controlling Volume
â–ş Move any of the four volume faders to control the volume of the corresponding sample.
Using SWING
1.
Press Display Button 2 to access the SWING dialog.
2.
Turn the Browse encoder to increase / decrease the SWING amount in percentage.
3.
Press Display Button 2 again to leave the SWING dialog.
TRAKTOR KONTROL S8 - Manual - 166
Applying Filter
1.
Turn Performance Knob 2 to set the filter cutoff.
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
2.
Press ON Button 2 to engage the filter.
→ The filter only applies to the selected sample.
TRAKTOR KONTROL S8 - Manual - 167
Applying Pitch Shifter
1.
Turn Performance Knob 3 to shift the pitch.
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
2.
Press ON Button 3 to engage the pitch shifter.
→ The pitch shifter only applies to the selected sample.
TRAKTOR KONTROL S8 - Manual - 168
Using Your S8—Getting Advanced
Using Step Sequencer Mode on Remix Decks
Applying FX Send
1.
Turn Performance Knob 4 to control the amount of FX Send from an FX Unit.
2.
Press ON Button 4 engage the FX.
→ The effect only applies to the selected sample.
TRAKTOR KONTROL S8 - Manual - 169
Using Your S8—Getting Advanced
Working with Beatgrids
3.12 Working with Beatgrids
TRAKTOR recognizes a track's BPM precisely and sets the Beatgrid. Some tracks, however, need manual correction e.g. a track with a complex rhythm or with uneven timing, coming from a tape machine or warped vinyl, and the S8 provides you with the controls to do this.
3.12.1 Checking a Beatgrid
To guarantee that all Tempo, Loop and Move controls work as expected, you will have to verify the Beatgrid for your tracks:
1.
Load a track into a Track Deck. The Track will be analyzed.
TRAKTOR KONTROL S8 - Manual - 170
Using Your S8—Getting Advanced
Working with Beatgrids
2.
Press Display Button 3 to zoom into the waveform and get a more precise view.
3.
Check the Beatmarker at the beginning of the track.
→ In this example, you can see the Beatmarker isn't aligned with the very beginning of the waveform. As a result, the track will not sync with others.
In the following section you will learn how to fix a misaligned Beatgrid manually.
TRAKTOR KONTROL S8 - Manual - 171
Using Your S8—Getting Advanced
Working with Beatgrids
3.12.2 Correcting a Beatgrid Manually
If it a track is not correctly aligned to the beat, use Beatgrid mode to fix it. The following section will explain the required steps.
Enabling the Beatgrid Mode
To enable the Beatgrid mode:
1.
Press the EDIT button.
The Beatgrid mode opens in the display. A four beat loop at the current playback position is displayed.
2.
Press the Deck's PLAY button to trigger playback of the track.
On the display, you'll see a four beat loop, based on the detected BPM value, which serves as a reference for manual Beatgrid adjustments. While playing back the track, a white position pointer cycles through, indicating the relative sync position within the loop. In the background, the entire track is played back and the red playhead travels across the waveform displayed below the loop.
TRAKTOR KONTROL S8 - Manual - 172
Using Your S8—Getting Advanced
Working with Beatgrids
Beatgrid Interactions
While the track is playing with Beatgrid Mode enabled:
â–ş Rotate Performance knob 1 ( OFFSET ) to shift the entire waveform underneath the Beatgrid. Align the first Beatmarker with the first peak in the loop's waveform.
â–ş Rotate Performance knob 2 ( BPM ) to correct the detected BPM value in coarse steps. Try to align the second, third and fourth beat (in most cases indicated by the biggest peaks in the waveform) with the second, third and fourth Beatmarker.
TRAKTOR KONTROL S8 - Manual - 173
â–ş Rotate Performance knob 3 ( FINE ) to fine-adjust the BPM value.
Using Your S8—Getting Advanced
Working with Beatgrids
â–ş Rotate Performance knob 4 ( SCAN ) to scroll through the track. Check if the Beatgrid stays aligned over the course of the track.
Beatgrid Interactions
While the track is playing with Beatgrid Mode enabled:
â–ş Press the Performance Mode buttons to select the desired parameter OFFSET , BPM ,
FINE , or SCAN in the Footer.
â–ş When OFFSET is selected rotate the LOOP encoder to shift the entire waveform underneath the Beatgrid. Align the first Beatmarker with the first peak in the loop's waveform.
TRAKTOR KONTROL S8 - Manual - 174
Using Your S8—Getting Advanced
Working with Beatgrids
â–ş When BPM is selected rotate the LOOP encoder to correct the detected BPM value in coarse steps. Try to align the second, third and fourth beat (in most cases indicated by the biggest peaks in the waveform) with the second, third and fourth Beatmarker.
â–ş When FINE is selected rotate the LOOP encoder to correct the detected BPM value in fine increments (.01 BPM).
â–ş When SCAN is selected rotate the LOOP encoder to scroll through the track. Check if the
Beatgrid stays aligned over the course of the track.
TRAKTOR KONTROL S8 - Manual - 175
Using Your S8—Getting Advanced
Working with Beatgrids
Position-aware Beatgrid Tempo Adjustment
Performance knobs 3 and 4 ( BPM ) are scaled based on the viewing position of Beatgrid mode so that adjustments made far away from the Beatmarker don’t result in abrupt changes to the waveform position. For example, if you are near the Beatmarker at the start of a track and change the tempo of the Beatgrid, you will see the waveform move under the Beatgrid by a particular amount. If you then scan later into the track, adjusting the tempo will create a similar amount of motion on the waveform (rather than a large amount of motion) thus allowing for precise setting of the Beatgrid tempo over the length of the track.
Beatgrid Zoom Mode
To set the position of the Beatgrid with greater precision you can use the Beatgrid Zoom mode:
1.
Press the ON button 1 to zoom in the first beat.
2.
Rotate Performance knob 3 and 4 to adjust the Beatgrid.
3.
Press the ON button 1 again to exit Beatgrid Zoom mode.
3.12.3 Additional Help Actions
Tap the Tempo
Tap allows you to manually set the tempo by tapping along the playing track:
TRAKTOR KONTROL S8 - Manual - 176
â–ş Press Display Button 3 ( TAP ) four times in sync with the playback.
Using Your S8—Getting Advanced
Working with Beatgrids
→ The tempo is calculated and the Beatgrid adapts to the tempo.
Tick (Audible Beatgrid)
The Tick works like a metronome, giving you an audible pulse for every beat. Align the Tick and the beats in your track for perfect sync.
You can only hear the Tick on the CUE (headphones), not the MAIN (audience).
TRAKTOR KONTROL S8 - Manual - 177
â–ş Press Display Button 2 to enable Tick .
→ The beat tick will then be audible in your headphones when cued.
Reset your edits
If your edits do not produce the desired result, you can undo your edits:
â–ş Press Display Button 4 ( RST ).
Using Your S8—Getting Advanced
Working with Beatgrids
→ This will reset your edits to the auto-detected values.
TRAKTOR KONTROL S8 - Manual - 178
Using Your S8—Getting Advanced
Working with Beatgrids
Lock the Beatgrid
Once the Beatgrid is correctly aligned with the beat throughout the whole track:
â–ş Press Display Button 1 ( LOCK ).
→ All buttons in the Beatgrid panel are deactivated.
The stored tempo (BPM) is locked and cannot be changed until you unlock it by clicking LOCK again. All tracks with a locked Beatgrid will show a small Lock Icon within the Browser.
TRAKTOR KONTROL S8 - Manual - 179
Hardware Reference
Overview of the Controller
4 Hardware Reference
This chapter details the interface elements on your S8 and explains how they interact with the
TRAKTOR software. This includes an overview of the main areas of the user interface, as well as a full reference for every button, knob, fader, and the color displays.
4.1
Overview of the Controller
This section provides you with an overview of the different areas of the controller's user interface.
TRAKTOR KONTROL S8 - Manual - 180
Hardware Reference
Overview of the Controller
Sections on S8's Top side
The top panel of the TRAKTOR KONTROL S8 is divided into three main areas:
(1) Decks: The Decks are the place where tracks, Stem Files, and Samples are played back. For more information on the Decks and it’s elements refer to section
(2) FX Units: Adding effects to playing audio can tremendously expand the sonic possibilities of your mix. For that purpose, TRAKTOR provides you with a great selection of high-quality FX.
These FX can be loaded into the so-called FX Units. For more information on FX Units, refer to
.
TRAKTOR KONTROL S8 - Manual - 181
Hardware Reference
The Deck
(3) Mixer: The mixer receives the audio signals coming from the Decks. As any DJ mixer, the
Mixer’s purpose basically is to adjust the relative level of each channel, to control the channels’ frequency content, possibly feeding them into the FX Units before sending the overall result to the Main section and in the end, to generate the mix that is sent to your audience. For more information on the mixer and on it’s elements, refer to section
.
4.2
The Deck
This section provides a detailed description of how the knobs, buttons, faders and the Touch
Strip on S8's Decks relate to the TRAKTOR workflow.
S8 features two identically equipped Deck sections at the far left and right sides of the unit.
These give you hardware control over the software Decks in the TRAKTOR software. Active
TRAKTOR Decks always work in one of the Deck modes, as Track Deck, Stem Deck, Remix
Deck or Live Input.
Since the left and right Decks work identically, we'll just talk about the left one. Implicitly, though, the descriptions also apply to the right Deck.
If you connect an external device to S8, you can also bypass the Deck completely by switching the corresponding Mixer channel from TRAKTOR mode to Thru mode. This will automatically de-activate the Deck.
For more details about the Deck modes, please refer to the TRAKTOR Manual.
The left-hand hardware Deck controls TRAKTOR's Decks A and C. The entire section can be focused on either the primary (A) or secondary (C) Deck. The positions of Decks on S8 are consistent with the Deck layout in TRAKTOR:
â–Ş The left-hand Deck controls TRAKTOR Decks A (on top) and C (below).
â–Ş The right-hand Deck controls TRAKTOR Decks B (on top) and D (below).
The following image and table give a detailed overview of the Deck's elements and provide links referring to sections with further information.
TRAKTOR KONTROL S8 - Manual - 182
Hardware Reference
The Deck
Interface elements on the Left Deck
(1) DECK button: The DECK Button allows you to switch the focus (and controls) between the primary and secondary Decks in a Deck section. For more information, refer to section
(2) FLUX button: The FLUX button enables Flux Mode for the focused Deck. For more informa-
tion, refer to section ↑ 4.2.2, FLUX Button
.
TRAKTOR KONTROL S8 - Manual - 183
Hardware Reference
The Deck
(3) Mode Select Buttons: The Deck can operate in several modes which can be easily enabled by the Mode Select Buttons. For more information, refer to section
.
(4) Loop encoder: Primarily, the Loop encoder is dedicated to looping functions but it also for determining values in other preferences. For more information, refer to section
(5) EDIT button: The EDIT button enters Beat Grid mode for re-aligning Beat Grids of tracks. For more information, refer to section
.
(6) CAPTURE button: The CAPTURE button opens the CAPTURE pop-up and allows you to quickly select the capture source for a Remix Deck. For more information, refer to section
(7) Display Area and BROWSE controls: The display reflects the information of TRAKTOR’s Decks and provides further display controls as well as BROWSE controls. For more information, refer
to section ↑ 4.2.7, Display Area and Controls .
(8) Performance controls: These knobs and buttons control effects for Remix Slots on a Remix
Deck as well as effects for Stem Parts on Stem Decks. For more information, refer to section
↑ 4.2.8, Performance Controls .
(9) Slot Volume Faders: The Deck provides four Slot Volume Faders allowing you to mix signals of Remix Slots of REMIX Decks as well as Stem Parts of Stem Decks. For more information, refer to section
(10) Pads: The Deck comes with a set of eight pads. Depending on the mode selected via the
Mode Select buttons, these pads are assigned different functions. For more information, refer
.
(11) Touch Strip: The Touch Strip reflects the behavior of Jog Wheels of traditional DJ controllers. For more information, refer to section
.
(12) TRANSPORT controls: The TRANSPORT controls control playback of the Deck. It also provides the SHIFT button to access secondary functions of other buttons. For more information, refer to section
↑ 4.2.12, Transport Controls .
TRAKTOR KONTROL S8 - Manual - 184
Hardware Reference
The Deck
4.2.1
DECK Button
The DECK button allows you to switch the focus (and controls) between the primary and secondary Decks in a Deck section.
DECK Button
The DECK button lights blue when a primary Deck ( A or B ) is focused and white when the secondary Deck ( C or D ) is focused.
4.2.2
FLUX Button
The S8's FLUX button enables Flux Mode for the focused Deck.
FLUX Button
Flux Mode
In Flux mode, for every Deck, a second playhead continues playing the track, even if you loop a section, temporarily jump back to a cue point, skip forward or backward, etc. That way, the track keeps progressing, no matter what you do.
4.2.3
Mode Select Buttons
On any Deck, next to the eight pads, S8 features the four Mode Select buttons HOTCUE,
LOOP, FREEZE, and REMIX. Depending on which of the four modes is active the pads’ functionality varies as explained in this section.
TRAKTOR KONTROL S8 - Manual - 185
Hardware Reference
The Deck
Mode Select Buttons
On any Deck, next to the eight pads, S8 features the four Mode Select buttons HOTCUE,
FREEZE, and REMIX. Depending on which of the three modes is active the pads’ functionality varies as explained in this section.
4.2.3.1
HOTCUE Button
The HOTCUE button activates HOTCUE mode. While in HOTCUE mode, the pads store and trigger HOTCUE markers in a track. On Decks A and B the button lits blue whereas on Decks C and D it lits white. HOTCUE mode is the default for Track Decks and Stem Decks.
HOTCUE Button
HOTCUE mode is not available for Remix Decks. When a Remix Deck is focused, the
HOTCUE button is disabled.
4.2.3.2
LOOP Button
The LOOP button activates LOOP mode. On Decks A and B the button lits blue whereas on
Decks C and D it lits white.
TRAKTOR KONTROL S8 - Manual - 186
LOOP Button
While in LOOP mode, the first row of pads turns green, and the second row turns orange.
Hardware Reference
The Deck
Pads in Loop Mode
Looping
â–Ş The first row of pads (green) allow you to loop a part of a track. By default the pads are assigned common loop sizes1/8 of a beat, 1/4 of a beat, 1/2 of a beat, 1 beat.
You can change the loop sizes in TRAKTOR's S8 Preferences:
Preferences>Traktor Kontrol S8>Loop Mode Sizes > Loop
For more information, see the TRAKTOR manual.
â–Ş If Quantize is activated, TRAKTOR will loop from the next beat.
â–Ş If Quantize is deactivated, looping starts immediately when you press the pad.
The behavior of the pads changes when you activate FLUX mode. While FLUX is deactivated, the loop will play back until you press that pad again. With FLUX activated, looping stops as soon as you release the pad.
TRAKTOR KONTROL S8 - Manual - 187
Hardware Reference
The Deck
Beatjumping
The second row of pads (orange) allow you to jump backward and forward in a track in predefined steps, in sync with the track's tempo. By default, the step sizes are:
â–Ş Jump back 1 loop size (set per Deck).
â–Ş Jump back 1 beat.
â–Ş Jump forward 1 beat.
â–Ş Jump forward 1 loop size (set per Deck).
Beatjump sizes can be changed in TRAKTOR's software preferences: Preferences>TRAKTOR KONTROL S8>Loop Mode Sizes>Beatjump.
â–Ş If Quantize is activated, TRAKTOR waits for the next beat before jumping.
â–Ş If Quantize is deactivated, TRAKTOR jumps immediately after pressing the pad.
4.2.3.3
FREEZE Button
The FREEZE button activates Freeze mode. On Decks A and B the button lits blue whereas on
Decks C and D it lits white.
FREEZE Button
Freeze Mode
Freeze mode takes the playhead position, adds the number of bars set as loop size and splits this section of a track into eight equally sized slices. These Freeze Slices are then mapped to the adjacent pads, which light up blue. By pressing any of these pads the playback continuous at the mapped Freeze Slice position and will play to the end of the track if no other Freeze
Slice is triggered.
In Freeze mode, the numbers 1 - 8 are overlaid on the waveform to indicate the location of the
Freeze Slices. The first row triggers Freeze Slices 1 - 4, the second row triggers Freeze Slices 5
- 8.
TRAKTOR KONTROL S8 - Manual - 188
Hardware Reference
The Deck
Freeze Mode Overlay
â–ş Adjust the size of the Freeze Slices by pressing and holding the FREEZE button and then turning the Loop encoder. The waveform in the display adjusts its zoom level accordingly.
You can vary Freeze Slice sizes between 1/4 of a beat and 4 beats.
TRAKTOR KONTROL S8 - Manual - 189
Hardware Reference
The Deck
Slicer Mode
The Slicer mode extends the Freeze mode's functionality. A press on the LOOP button while in
Freeze mode the playback behavior of the pads changes: Instead of playing from the slice start to the end of the entire track, pressing and holding a pad in Slicer mode will play back just the corresponding slice in a loop. A further press on the Loop encoder exits Freeze Slicer and playback continuous as normal.
In Slicer Mode, the pads turn green and while playing back the selected loop, pads flash bright green while the assigned slice is played back. This is also reflected on the Deck's display.
4.2.3.4
REMIX Button
When on a Track Deck or Stem Deck the REMIX button enables Remix mode to get direct access to the current Remix Set page of the corresponding Remix Deck. The pads reflect the colors of the underlying Remix Cells.
REMIX Button
The Remix mode can only be enabled when the underlying Deck is configured as Remix
Deck. Otherwise the REMIX button remains unlit.
On a Remix Deck, the REMIX mode is the default and allows you to capture portions of a track to the Remix Cells by pressing a pad. Furthermore, the REMIX button can be used to capture loops.
If the Deck you set as capture source is empty, S8's display shows Error while copying in the Deck header.
For more detailed information on capturing samples, refer to section ↑ 4.2.6, CAPTURE Button .
TRAKTOR KONTROL S8 - Manual - 190
Hardware Reference
The Deck
4.2.4
Loop Encoder
The Loop encoder is dedicated to looping functions on Track Decks, Stem Decks or Remix
Decks. It has a press function to engage a loop, a rotate function to adjust the loop size, as well as a segmented LED ring indicating that a loop is engaged. When focus is on Deck A or B the LED ring color is blue. When focus is on Deck C or D the LED ring color is white.
Loop Encoder
You cannot permanently engage a loop when Flux mode is active. The loop only remains engaged for as long as you hold the Loop encoder and turns off again when released.
Adjustments to loop size can be made whether a loop is engaged or not.
Moving the Playhead
When a loop is inactive, the Loop encoder can also be used for moving the playhead in increments of the Loop size by holding SHIFT and then turning the loop encoder.
4.2.5
EDIT Button
The EDIT button activates Beat Grid mode that lets you adjust a track's Beat Grid. The TRAK-
TOR software can analyze your music and apply a Beat Grid which allows automatic beatmatching and synchronization.
EDIT Button
TRAKTOR KONTROL S8 - Manual - 191
Hardware Reference
The Deck
In most cases (through its Analyze function), TRAKTOR recognizes a track's BPM precisely and sets the Beat Grid. Some tracks, however, need manual correction (e.g. a track with a complex rhythm or with uneven timing, coming from a tape machine or warped LP), and the S8 provides you with the controls to do this. For more information on using Beat Grid mode refer to
section ↑ 3.12, Working with Beatgrids .
Beat Grid editing only applies to Track Decks and Stem Decks. The EDIT button is disabled when a Remix Deck is focused.
4.2.6
CAPTURE Button
The CAPTURE button allows you to quickly select the capture source for sampling to the Remix Deck.
CAPTURE Button
By holding the CAPTURE button and touching the BROWSE encoder the display shows the current capture source. The rotation of the BROWSE encoder selects another capture source.
The capture size is determined by the source Deck's loop size setting.
4.2.7
Display Area and Controls
On the S8's graphic color displays, some functionality is dynamically shown or hidden by means of the Display buttons adjacent to the display. The following image gives a detailed overview of the Display area and its controls, as well as a table with links referring to sections with further information.
TRAKTOR KONTROL S8 - Manual - 192
Hardware Reference
The Deck
Display Area and Controls
(1) BACK Button: The BACK button lets you navigate back up a level in the Browser. For more information, refer to section
(2) BROWSE Encoder: The BROWSE encoder opens the Browser on a Deck’s display and let you scroll through lists and load tracks. For more information, refer to section
(3) Settings Button: The Settings button opens the device settings, allowing you to adjust RGB calibration (color rendition) and screen brightness, as well as TOUCH sensitivity of the knobs.
For more information, refer to section
.
(4) Display Buttons: The function of these four buttons depends on context - whether the display is currently showing a Track Deck, Remix Deck or Beat Grid Edit. For more information, refer to section
.
TRAKTOR KONTROL S8 - Manual - 193
Hardware Reference
The Deck
(5) Display: By means of the 4.3-inch color displays, you can use a lot of TRAKTOR's features without looking at your computer's display. For more information, refer to section
.
(6) View Button: This button toggles between Single View and Split view, which gives you a very basic overview of the corresponding secondary Deck. For more information, refer to section
(7) Performance Mode Buttons: These two buttons are used to select the Performance Mode (i.e.
FILTER , PITCH , FX SEND, and MIDI ) for the Performance Controls (i.e. the four Performance knobs and ON buttons underneath the displays). These modes apply to Remix Decks and Stem
Decks. For more information, refer to section ↑ 4.2.7.7, Performance Mode Button .
4.2.7.1
BACK Button
When in the Browser displayed, the BACK button lets you navigate a level up in the folder structure, up to the Browser's top level. Pressing the BACK button for longer than a second lets you exit the Browser.
BACK Button
4.2.7.2
BROWSE Encoder
The BROWSE encoder lets you access the Browser and navigate through your track collection and playlists.
BROWSE Encoder
TRAKTOR KONTROL S8 - Manual - 194
Hardware Reference
The Deck
The BROWSE encoder can be pressed and rotated. Primarily it has following functionalities:
â–Ş Pressing the BROWSE encoder opens the Browser in the display.
â–Ş Turning the BROWSE encoder lets you scroll through the list items. Pressing it again enters a sub folder and again loads an item.
Besides browsing, the BROWSE encoder can be used for adjusting parameters and selecting options in other menus and pop-ups.
You can configure the Browse encoder to open the Browser on touch. To do so, activate the Auto Open Browser on Touch option in TRAKTOR's TRAKTOR KONTROL S8 Preferences.
4.2.7.3
Settings Button
The Settings button opens S8's device settings screen.
Settings Button
Display Settings (RGB)
Within the settings, you can adjust the screens' color rendition (saturation of RED , GREEN and
BLUE colors), as well as the screen's BRIGHTNESS . The rotation of the Performance knobs beneath the display adjust the parameters.
Display Settings View
TRAKTOR KONTROL S8 - Manual - 195
4.2.7.4
Display Buttons
The Display buttons provide different functionality depending on current view.
Hardware Reference
The Deck
Display Buttons
This is an overview of what these buttons do depending on what you see on the display.
Track Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the KEY window.
(3) Display Button 3: Zooms into the waveform.
(4) Display Button 4: Zooms out of the waveform.
Stem Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the KEY window.
(3) Display Button 3: Zooms into the waveform. Secondary function: When in Stem view and holding SHIFT and pressing Display button 3 will show Full Track view.
TRAKTOR KONTROL S8 - Manual - 196
Hardware Reference
The Deck
(4) Display Button 4: Zooms out of the waveform. Secondary function: When in Full Track view and holding SHIFT and pressing Display button 4 will show Stem view.
Remix Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the QUANTIZE pop-up.
(3) Display Button 3: Scrolls up in the Sample Grid in steps of two.
(4) Display Button 4: Scrolls down in the Sample Grid in steps of two.
Please note that you can leave any pop-up by pressing the same button again or, alternatively, the View button.
4.2.7.5
Display
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two upper Decks ( A and B ) are Track Decks, and the lower Decks ( C and D ) Remix Decks.
â–Ş The left display provides feedback about Decks A and C .
â–Ş The right display provides feedback about Decks B and D .
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck. If a mixer channel is set to Thru mode on S8, the corresponding TRAKTOR Deck is set to Thru mode, as well. Here's an overview of the information S8's displays provide for each of these:
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two upper Decks ( A and B ) are Track Decks, and the lower Decks ( C and D ) Remix Decks.
â–Ş The left display provides feedback about Decks A and C .
â–Ş The right display provides feedback about Decks B and D .
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck.
Here's an overview of the information S8's displays provide for each of these:
TRAKTOR KONTROL S8 - Manual - 197
Hardware Reference
The Deck
Track Deck and Stem Deck
Track Deck or Stem Deck View
The Track Deck or the Stem Deck view on S8 provides information about:
(1) Artwork, Song title and Artist name.
(2) Loop size: From 1/32 - 32 beats.
(3) Playhead position: time played and time remaining.
(4) Deck tempo in BPM.
(5) Deck Focus: Deck A - D .
(6) Sync state: If a Deck is assigned Tempo Master, MASTER is displayed underneath the BPM value. SYNC indicates that the Deck is synchronized to a Tempo Master. If a Deck isn't synchronized at all, the Deck header shows tempo deviation in percent from the file's original tempo.
TRAKTOR KONTROL S8 - Manual - 198
Hardware Reference
The Deck
Remix Deck
Remix Deck View
The Remix Deck view on S8 provides information about:
(1) Artwork graphic, Set title and Artist name.
(2) Loop size: from 1/32 - 32 beats.
(3) Quantize Value.
(4) Deck tempo in BPM.
(5) Deck Focus: Deck A - D .
(6) Sync state: If a Deck is assigned Tempo Master, MASTER is displayed underneath the BPM value. SYNC indicates that the Deck is synchronized to a Tempo Master. If a Deck isn't synchronized at all, the Deck header shows tempo deviation in percent from the file's original tempo.
TRAKTOR KONTROL S8 - Manual - 199
Hardware Reference
The Deck
(7) The absolute position on TRAKTOR's timeline measured in Bars.Beats.Phrases.
Live Input Deck
S8's rear panel allows you to connect microphones, turntables, or CD players. You can route these audio signals into the TRAKTOR software and mix them with your other Decks by setting a Deck to Live Input mode in the TRAKTOR software. In this mode, S8's display reads Live
Input - Traktor Audio Passthru .
S8's Transport Controls are disabled while a Deck runs as Live Input.
Thru Mode
If you don't need to run an external device like turntable or CD player through a Deck, switch that mixer channel to Thru mode on S8 by pressing the TRAKTOR button. The signal is mixed in S8's mixer and never sent to TRAKTOR then.
4.2.7.6
View Button
The View button switches between view types in the display.
View Button
It switches between view types:
â–Ş Single View: Only the focused Deck is displayed.
â–Ş Split View: Both Decks are displayed; the focused Deck is visualized by a big waveform and detailed information, while the unfocused Deck is reduced to a small waveform, showing markers and a playhead.
Whenever you open a pop-up from a Deck view (e.g. FX Selection Menu, Browser, BPM , or KEY ) the View button starts flashing. Press the View button to close the pop-up.
TRAKTOR KONTROL S8 - Manual - 200
Hardware Reference
The Deck
4.2.7.7
Performance Mode Button
The Performance Mode buttons marked with left and right arrows let you cycle through the Performance modes FILTER , PITCH , FX SEND and, if enabled, MIDI .
Left Performance Mode Button
If you activate 4 FX Units in TRAKTOR's preferences, the Performance Mode buttons allow you to select FX Units 3 and 4.
4.2.8
Performance Controls
Underneath the display, the Deck features four knobs and buttons which control FILTER ,
PITCH , FX SEND or, if enabled, MIDI per Remix Slot in a Remix Deck.
Performance Controls
Performance Mode FILTER
The default Performance Mode for a Remix Deck is FILTER . The Performance ON buttons are used to engage/disengage a Remix Slot's FILTER . The FILTER cutoff is controlled by the corresponding Performance knob. Adjustments to FILTER cutoff are shown via the Performance pop-up at the lower end of the displays.
The Performance Controls work even if the Remix Deck isn't focused.
TRAKTOR KONTROL S8 - Manual - 201
Hardware Reference
The Deck
If you set up TRAKTOR with 4 FX Units, the Performance knobs and buttons in Deck A control FX Unit 3, those in Deck B control FX Unit 4. By default, they have no function for Track Decks.
Performance Mode FX SEND
When FX SEND is selected, the knobs control the amount of signal being sent to the assigned
FX Unit(s), per Slot. The FX SEND amount is displayed right above the corresponding Performance knob.
In case you increase FX SEND and still don't hear any effect, please make sure the Remix Deck is actually assigned to an FX Unit in the corresponding Mixer channel.
For information on how to use Performance Controls for operating FX Units (3 and 4), refer to section
↑ 4.3.3, Additional FX Unit 3 and 4
.
Performance Mode PITCH
When PITCH is selected, the Performance knobs transpose the pitch of the playing sample. In other words: pitch correction is applied per Remix Cell. The amount of pitch change is displayed above the corresponding knob.
4.2.9
Slot Volume Faders
S8 offers a separate volume fader per Remix Slot or Stem Part. This allows you to mix signals from up to four Remix Slots within a single Remix Deck, or to mix signals from up to four Stem
Parts within a single Stem Deck before it runs through the channel fader and the Crossfader.
TRAKTOR KONTROL S8 - Manual - 202
Hardware Reference
The Deck
Slot Volume Faders
Slot Volume Faders used on Remix Decks
â–Ş In case only one Deck per side is a Remix Deck, the faders control that Remix Deck's slot volume even if another Deck is focused.
â–Ş In case both the primary and secondary Deck are configured as Remix Decks, the Slot Volume faders control the focused Deck's slots.
Slot Volume Faders used on Stem Decks
â–Ş In case only one Deck per side is a Stem Deck, the faders control that Stem Deck's Stem
Part.
â–Ş In case both the primary and secondary Deck are configured as Stem Decks, the Slot Volume faders control the focused Deck's Stem Parts.
4.2.10 Pads
Each of S8's Decks comes with a set of 8 pads. Depending on the mode selected via the Mode
Select buttons, these pads are assigned different functions.
TRAKTOR KONTROL S8 - Manual - 203
Hardware Reference
The Deck
Pads
Here's an overview of what the pads do in each mode:
HOTCUE mode
During playback, pressing in an inactive pad sets a cue point. The pad lights up and the cue point is automatically assigned to this pad. Pressing that pad again let jump back the playhead to the cue point just defined.
LOOP mode
In Loop mode, pressing a pad instantly loops playback for the number of bars set as Loop
Mode Size in Preferences > Traktor Kontrol S8 > Loop Mode Sizes > Loop. These values are by default:
â–Ş 1/8 Bar Loop
â–Ş 1/4 Bar Loop
â–Ş 1/2 Bar Loop
â–Ş 1 Bar Loop
The Loop functionality considers the global Quantize setting:
â–Ş If Quantize is active, TRAKTOR delays starting the loop until the next down-beat, making sure looping keeps the track in sync.
â–Ş If Quantize is deactivated, looping starts precisely when you press the pad.
TRAKTOR KONTROL S8 - Manual - 204
Hardware Reference
The Deck
FREEZE and Slicer Mode
In Freeze mode, TRAKTOR takes the playhead position, adds the number of bars set as loop size and splits this section of a track into eight equally sized slices. These are then mapped to the pads. Press a pad to start playback from that slice.
While in Freeze mode, you can access Slicer mode. This is how Slicer mode is different from
Freeze mode:
â–Ş In Slicer mode, holding a pad will infinitely loop the corresponding slice.
â–Ş In Slicer mode, holding two pads will loop the range between the start of one pad and the end of the second.
By pressing the Loop encoder while Freeze mode is active this will enable the Slicer mode. The slices in the display and pad color change from blue to green.
REMIX Mode
In Remix mode, the pads trigger the content of corresponding Remix Cells - the tracks, loops or Samples defined in the Remix Set. After loading a Remix Set, the pads take on the Sample
Cells' color. By pressing Display buttons 3 and 4 you can scroll through the rows of Remix
Cells in steps of two.
4.2.11 Touch Strip
S8 doesn't feature the conventional Jog Wheels of a regular DJ controller. Functions usually associated with Jog Wheels are instead controlled by the intuitive Touch Strips.
The Touch Strip
Utilizing the Touch Strip, you can:
â–Ş Seek/navigate within the track.
â–Ş Tempo bend (nudge) for aligning beats.
â–Ş Create a scratch effect
TRAKTOR KONTROL S8 - Manual - 205
Hardware Reference
The Deck
â–Ş Holding the track or Samples.
â–Ş Backspinning the track or the Samples.
Above the Touch Strip, a number of LEDs provide visual feedback for the actions taken on the touch strip.
Phase Meter
For Track Decks, Stem Decks and Remix Decks, the LEDs work as a Beat Phase Meter, showing the focused Deck's beat phase offset from the MASTER Deck. This is the same meter as displayed in TRAKTOR's Deck.
Direction of Scratching
If you didn't learn scratching with LPs and turntables, you may find inversing the Touch Strip's direction more intuitive. If you select this option, swiping to the right on the Touch Strip will move forward in the track's waveform.
â–ş Inverse the directional response by unchecking the Invert checkbox in TRAKTOR's S8 preferences: Preferences> Traktor Kontrol S8>Touchstrip>Scratch Sensitivity.
For detailed information on the Touch Strip's preferences, refer to section
.
Direction of Tempo Bending
In TRAKTOR's default setting, swiping your finger on the Touch Strip has a similar effect to speeding up or slowing down an LP with your hand:
â–Ş Moving to the left speeds up the LP.
â–Ş Moving to the right slows down the LP.
If you didn't learn aligning LPs on turntables, this behavior may not make sense to you. Instead, looking at the waveform, you think in terms of moving the playhead position within the track. Also, you want Tempo Bending to be consistent with Seeking:
â–Ş Swipe to the right to move the playhead ahead.
â–Ş Swipe to the left to move the playhead back.
TRAKTOR KONTROL S8 - Manual - 206
Hardware Reference
The Deck
Inversed Tempo Bending Direction
To achieve this, uncheck the Invert option in: Preferences> Traktor Kontrol S8>Touchstrip>Bend Sensitivity.
Sensitivity
S8 comes with a Sensitivity setting which should accommodate most users in most situations.
You might, however, find that the Touch Strip doesn't react immediate enough to your input or just the opposite, it may recognize input where there was none intended.
You can adjust the Touchstrip's Bend Sensitivity and Scratch Sensitivity separately in: Preferences> Traktor Kontrol S8>Touchstrip.
4.2.12 Transport Controls
The Transport buttons control playback of S8's Decks.
These controls only relate to TRAKTOR mode, they have no function when the S8 is used as a stand-alone device.
TRAKTOR KONTROL S8 - Manual - 207
Hardware Reference
The Deck
PLAY Button
The PLAY button starts/stops the playback of a focused Deck. When playback is active the button lits green brightly. When playback is stopped it is dim.
PLAY Button
CUE Button
The CUE button is tied to the Hot Cue points workflow in TRAKTOR. When the button is pressed it lits blue brightly. When it is released it is dim.
CUE Button
The CUE button functions as follows:
â–Ş If a Deck is playing, pressing CUE let you jump to the Floating Cue Point and stop playback.
â–Ş If a Deck is stopped, holding CUE starts playback as long the CUE button is hold.
â–Ş If a Deck plays while CUE is hold, pressing PLAY let keep playing after releasing the buttons.
â–Ş Press SHIFT + CUE to skip back to the beginning of the track and playback continuous immediately.
SYNC Button
The SYNC button activates/deactivates the synchronization to the Master Deck.
SYNC Button when in Sync
TRAKTOR KONTROL S8 - Manual - 208
Hardware Reference
The FX Unit
While playing, pressing SHIFT + SYNC sets the Deck as the Tempo Master. The Deck's tempo becomes the tempo reference for all other synced Decks and FX. S8's display shows MASTER in the Deck header of the Master Deck.
The SYNC button takes on different states to provide visual feedback:
â–Ş If the Deck is BPM-synced and in phase with the Tempo Master, the button is bright green.
â–Ş If the Deck is BPM-synced but out of phase with the Tempo Master, the button is bright red.
â–Ş If the Deck is not in sync, the button is dim green.
If a focused Deck gets out of phase, pressing the SYNC button twice let snap back the Deck into sync with the Tempo Master.
SHIFT Button
The SHIFT button is a modifier for other control elements on the S8. It allows you to access secondary functions. When the Shift button is pressed it lits white brightly.
SHIFT Button
â–Ş For the control elements in S8's Deck section, SHIFT operates locally i.e. you cannot use the left SHIFT to access the secondary functions of a Deck or FX Unit on the right side of the controller.
â–Ş For S8's Mixer section, either SHIFT button can be used to access the secondary functions.
You will find examples of using the SHIFT button to access secondary functions throughout this document.
4.3
The FX Unit
Above the Decks, the S8 features two FX Units which can be assigned to any of the Decks.
Four knobs and buttons per FX Unit allow you to control effects parameters in real time. Just like in the software, FX Unit 1 is located in the top-left corner, FX Unit 2 in the top-right.
TRAKTOR KONTROL S8 - Manual - 209
Hardware Reference
The FX Unit
FX Units 1 and 2
FX Units allow you to creatively process a track, ranging anywhere from just adding reverb for a build-up to completely messing up a beat with stutter effects. For that purpose, the TRAKTOR software offers a great selection of high-quality FX. These can easily be configured from S8 and be controlled utilizing the FX Unit controls.
The Left FX Unit
By default, FX Units 1 and 2 are always active. Assign effects to any mixer channel via the respective channel's FX Assign buttons. Left assigns to FX1, right to FX 2.
This is an overview of the naming and function of the FX Unit's key control elements. The knobs in this section are sensitive to touch. Touch any of them to open the FX drop-down menu that provides an overview of the effect(s) loaded along with control assignments and parameter values.
â–Ş Single Mode: select one effect; the FX knobs let you control up to 4 parameters.
â–Ş Group Mode: select up to three effects as an effects chain; the FX knobs let you control one parameter per effect.
TRAKTOR KONTROL S8 - Manual - 210
Hardware Reference
The FX Unit
The following table gives a detailed overview of the parameters controlled by FX buttons and
FX knobs and it provides links referring to sections with further information.
Name
FX Button 1
FX Button 2
FX Button 3
FX Button 4
FX Knob 1
FX Knob 2
FX Knob 3
FX Knob 4
Function in Single Mode
Activate/deactivate the entire FX
Unit.
Reset all FX parameters to their default value.
-
Function in Group mode
Activate/deactivate FX slot 1.
Depends on the selected effect. Activate/deactivate FX slot 2.
Depends on the selected effect. Activate/deactivate FX slot 3.
Adjust the ratio between the unprocessed (dry) signal and processed (wet) signal for the entire FX Unit.
Controls FX parameter 1.
Adjust the ratio between the unprocessed (dry) signal and processed (wet) signal for the entire FX Unit.
Control the 1st effect in the FX
Unit.
Controls FX parameter 2.
Controls FX parameter 3.
Control the 2nd effect in the FX
Unit.
Control the 3rd effect in the FX
Unit.
FX Unit 2 has the same layout as FX Unit 1, apart from the FX SECTION button being located in the top-right corner of the device.
4.3.1
FX SELECT Button
Pressing the FX SELECT button opens the FX Settings in the display. FX1 is configured on the left display, FX 2 on the right one.
TRAKTOR KONTROL S8 - Manual - 211
Hardware Reference
The FX Unit
FX SELECT Button
The FX Settings stay open until the FX SELECT button is pressed again. When disengaged, the
FX SELECT button is dim.
FX Settings of FX Unit 1
The options in these FX Settings determine how you will use the FX Unit.
4.3.2
FX Unit Assignment
In order to route a Deck's signal to an FX Unit, press the corresponding FX Assign button in the mixer channel.
FX Assign Buttons
â–ş In TRAKTOR's default setup with 2 FX Units, press the left FX button to assign the mixer channel to FX Unit 1. Press the right FX button to assign the channel to FX Unit 2. The
FX assign buttons light up bright orange when assigned.
TRAKTOR KONTROL S8 - Manual - 212
Hardware Reference
The FX Unit
4.3.3
Additional FX Unit 3 and 4
By default, TRAKTOR is set up with two FX Units. In order to use all four of TRAKTOR'S FX
Units, you need to change the following setting:
â–ş In TRAKTOR's Preferences, select Effects>FX Unit Routing>4 FX Units.
TRAKTOR's FX Unit Routing Preferences
If you activate 4 FX Units , S8's Performance controls are assigned to FX Units 3 and 4. They work in a fashion very similar to the dedicated controls in FX Units 1 and 2.
Controls for 4 FX Units
TRAKTOR KONTROL S8 - Manual - 213
Hardware Reference
The Mixer
(1) FX Units 1 and 2 are available in any configuration.
(2) FX Units 3 and 4 are available once the 4 FX Units option is activated. They offer the same features as units 1 and 2 by means of the Performance controls.
Assigning FX Units 3 and 4
To route a channel to FX Unit 3 or 4:
â–ş Press SHIFT button + an FX assign button. The left FX assign button assigns to FX Unit
3, the right button to FX Unit 4.
FX Unit 2 has the same layout as FX Unit 1, apart from the FX SECTION button being located in the top-right corner of the device.
4.4
The Mixer
This is a brief overview of the mixer's layout, its function and operation. After that, the detailed hardware reference explains each and every component found in S8's mixer section. The 4channel mixer sits at the center of both, S8, as well as TRAKTOR's software interface. When connected to TRAKTOR, the knobs in S8's mixer section control the corresponding knobs on the software mixer.
TRAKTOR KONTROL S8 - Manual - 214
Hardware Reference
The Mixer
S8's Mixer
(1) Mixer channels A, B, C, and D: Each channel receives its input signal from TRAKTOR's corresponding virtual Deck or, alternatively, from an external source (e.g. turntables, CD players, or a microphone) via the inputs on S8‘s rear panel. Each channel has dedicated controls such as the channel fader to smoothly fade into and out of the mix. For more information, refer to section
TRAKTOR KONTROL S8 - Manual - 215
Hardware Reference
The Mixer
(2) Mixer Main Section: The Mixer channels feed into the Mixer Main section which routes the signal to MAIN , and BOOTH outputs. For more information, refer to section
.
S8's mixer comes with its own audio processor, which allows it to be used as a standalone mixer with 3-band EQ and HP/LP Filter per Channel. The Decks and FX Units, on the other hand, are tied to TRAKTOR software features and don't work in stand-alone operation.
4.4.1
Mixer Channel
All mixer channels are laid out identically. Let's have a look at one of them.
TRAKTOR KONTROL S8 - Manual - 216
Hardware Reference
The Mixer
Mixer Channel Details
From top to bottom, a mixer channel consists of the following controls:
(1) GAIN knob: The GAIN knob controls the level directly after the channel input so you can adjust the relative levels between Decks. For more information, refer to section
.
(2) TRAKTOR button: The TRAKTOR button switches between TRAKTOR mode and Direct Thru mode per channel. For more information, refer to section
.
TRAKTOR KONTROL S8 - Manual - 217
Hardware Reference
The Mixer
(3) FX Assign buttons: The FX Assign buttons assign the channel to the FX Units. For more information, refer to section
.
(4) Input level meter: Each channel has a dedicated Input level meter that displays the signal level before the channel fader. For more information, refer to section
.
(5) EQ ( HI , MID , LOW ) knobs: These knobs control the frequency balance. This works in both
TRAKTOR mode and Direct Thru mode. For more information, refer to section
.
(6) FILTER button and FILTER knob: These controls control a Filter ( HPF or LPF ) effect once activated via the FILTER button. This works in both TRAKTOR mode and Direct Thru mode. For more information, refer to section
↑ 4.4.1.7, FILTER Button and FILTER Knob
.
(7) CUE button: The CUE button allows you to audition the channel’s signal on your head-
phones. For more information, refer to section ↑ 4.4.1.8, CUE Button
.
(8) Channel fader: The Channel fader lets you smoothly fade a channel into to the mix. This works in both TRAKTOR mode and Thru mode. For more information, refer to section
4.4.1.1
GAIN Knob
The GAIN knob controls the level a channel receives from the corresponding Deck or audio input in order to avoid differences in loudness when mixing.
GAIN knob
GAIN is applied after the INPUT and conversion to digital. So if you connect a turntable or any other external device and your channel level meter is constantly moving beyond the four orange segments with the GAIN knob in center position, dial back that device's output level until only the loudest passages reach the orange range of the Input level meter.
TRAKTOR KONTROL S8 - Manual - 218
Hardware Reference
The Mixer
4.4.1.2
TRAKTOR Button
The TRAKTOR switch a channel between TRAKTOR mode and Direct Thru mode.
TRAKTOR Button
Direct Thru mode allows you to use S8 as a stand-alone 4 channel mixer to mix turntables, CD-
Players and other sources, apply EQ and Filter to each channel and route them to the outputs.
TRAKTOR Button
TRAKTOR mode
"
"
Direct Thru mode
"
"
S8 Channel
Connected to
TRAKTOR
Thru mode
TRAKTOR Deck
Track Deck
Remix Deck
Live Input
Direct Thru
Audio source
TRAKTOR Deck
TRAKTOR Deck
External source
External source
If you're using the S8 without a computer connected, as a stand-alone mixer, the TRAKTOR buttons are off.
A detailed look at using the S8 as a stand-alone DJ mixer in Thru mode is provided in chapter
.
4.4.1.3
FX Assign Buttons
Each channel offers two FX Assign buttons which activate routing through TRAKTOR's FX
Units. The left one routes the channel to FX Unit 1, the right one routes to FX Unit 2.
FX Assign Buttons
TRAKTOR KONTROL S8 - Manual - 219
Hardware Reference
The Mixer
These assignments aren't mutually exclusive, so you can send signal to either one or both FX
Units at the same time.
If you activate both FX assign buttons, your track will first run through FX1, then FX2.
TRAKTOR's FX only work if a channel is set to TRAKTOR mode. If you need to run an external device through TRAKTOR's FX, set it to TRAKTOR mode and choose the Live
Input Deck flavor.
Assigning FX Units 3 and 4
TRAKTOR supports up to 4 FX Units. Activate the two additional FX Units in TRAKTOR's preferences: Preferences > Effects > FX Unit Routing > 4 FX Units.
To assign a channel to FX Unit 3 or 4:
â–ş Press SHIFT + FX assign button. The left button assigns to FX Unit 3, the right one to FX
Unit 4.
â–ş Control FX Units 3 and 4 via S8's Performance knobs and buttons.
4.4.1.4
EQ Knobs
Each channel provides a 3-band EQ section: HI , MID and LOW knobs allow you to restore the tonal balance between different tracks by increasing or decreasing the corresponding frequency band's volume.
TRAKTOR KONTROL S8 - Manual - 220
Hardware Reference
The Mixer
EQ knobs
At the center position, the knobs have a detent, marking the position where the EQ doesn't change the frequency balance.
S8's internal EQ sounds identical to the Z ISO which is the default in the TRAKTOR software.
TRAKTOR provides you with various types of EQ, each of them with its own “personality.” You can choose the EQ type in Preferences > Mixer > EQ Selection.
4.4.1.5
Channel Fader
The channel fader controls the channel’s level being sent to the Crossfader and MAIN OUT .
TRAKTOR KONTROL S8 - Manual - 221
Hardware Reference
The Mixer
Channel Fader
A channel's fader setting doesn't affect its volume in the CUE - use the GAIN knob to balance its relative level and then pull the faders up to fade in.
4.4.1.6
Channel Meter
Channel Meter
The channel meter gives visual feedback to set up the optimal signal level. If your source is a
TRAKTOR Deck, the level can be adjusted with the GAIN knob.
TRAKTOR KONTROL S8 - Manual - 222
Hardware Reference
The Mixer
If you connect external turntables or CD Players, use their volume knobs to set the correct channel level. If S8's input starts clipping, lowering GAIN will make the channel quieter, but it won't resolve clipping at the input.
Increase level so that you get a steady movement of the blue segments and so that the loudest passages of your track just barely push the level meter into the orange range. Don't worry, the
MAIN output has massive reserves to drive the P.A. even if you don't push the input as hard as you can.
4.4.1.7
FILTER Button and FILTER Knob
The FILTER button is an on/off switch for the on-board dual-mode filter. The FILTER knob either applies a hi-pass or a low-pass-filter depending on of rotating direction. Rotating the knob to the right applies a hi-pass filter and rotating to the left applies a low-pass filter.
FILTER button and FILTER knob
Even if the FILTER button is engaged, when the FILTER knob is in its center position, no filter is applied.
TRAKTOR provides you with different types of dual-mode filters. You can choose the filter type in the Preferences>Mixer>Filter Selection.
4.4.1.8
CUE Button
Press the CUE button to send the channel’s signal to the cue channel in order to audition it over your headphones.
TRAKTOR KONTROL S8 - Manual - 223
Hardware Reference
The Mixer
CUE Button
The channel fader doesn't affect the channel volume in the CUE. Keep it down until you are ready to fade the channel into the MAIN mix.
For a practical tutorial on using headphone controls in the mix, please refer to section
Using Headphones to Prepare the Mix .
4.4.2
Mixer Main Section
This chapter gives a brief overview of the Mixer's Main section first and then an explanation of every control element. The following image and table give a detailed overview of the Mixer
Main section's elements and provide links referring to sections with further information.
TRAKTOR KONTROL S8 - Manual - 224
Hardware Reference
The Mixer
Mixer Main Section Elements
(1) Crossfader: The Crossfader controls the mix between the channel(s) assigned to its left and
right side. For more information, refer to section ↑ 4.4.2.1, Crossfader .
(2) CUE VOL knob: The CUE VOL knob controls the headphone level for both headphone connectors on the front panel. For more information, refer to section
.
(3) CUE MIX knob: The CUE MIX knob balances your headphone mix between the signal going out to the MAIN and the CUE
. For more information, refer to section ↑ 4.4.2.3, CUE MIX Knob .
TRAKTOR KONTROL S8 - Manual - 225
Hardware Reference
The Mixer
(4) TEMPO encoder: The TEMPO encoder controls the global tempo. For more information, refer
to section ↑ 4.4.2.4, TEMPO Encoder
.
(5) BOOTH knob: The BOOTH knob controls overall volume of the signal being sent to the
BOOTH OUT
. For more information, refer to section ↑ 4.4.2.5, BOOTH Knob .
(6) GLOBAL section: The GLOBAL section allows you to enable and disable TRAKTOR's Snap
and Quantize functions. For more information, refer to section ↑ 4.4.2.6, GLOBAL Section
.
(7) MIC assignment buttons: The MIC assignment buttons allow you to assign microphone inputs to mixer channels. For more information, refer to section
↑ 4.4.2.7, MIC 1 and 2 Buttons
.
(8) MAIN knob: The MAIN knob controls the overall volume of the signal being sent to the
MAIN OUT . For more information, refer to section
.
4.4.2.1
Crossfader
The Crossfader controls the mix between the channels assigned to its left and right side via the
Crossfader Assign Switches on S8's front panel.
The Crossfader
Adjust the cross-fading behavior to fit your performance via the XF CURVE knob:
The XF CURVE knob located at the front panel.
TRAKTOR KONTROL S8 - Manual - 226
Hardware Reference
The Mixer
â–Ş Smooth transitions and mixing tracks: Turn XF CURVE all the way to the left. The cross-fading works gradually, which means that with the Crossfader in its center position, the left and right sides are mixed equally.
â–Ş Scratching and Effects: Turn XF CURVE all the way to the right. The Crossfader works almost like a switch at its left and right ends.
4.4.2.2
CUE VOL Knob
The CUE VOL knob adjusts the volume of the headphone output.
The CUE VOL Knob
S8's high power headphone amps deliver enough volume even in loud environments.
Please be careful and start with a low setting.
4.4.2.3
CUE MIX Knob
The CUE MIX knob determines whether you hear the MAIN mix only, the CUE channel only, or a mix of both signals in your headphones.
CUE MIX Knob
TRAKTOR KONTROL S8 - Manual - 227
Hardware Reference
The Mixer
Pre-view a new track in your CUE and raise the channel's GAIN until the mix of both tracks sounds good when the CUE MIX is in center position. That way, when you actually mix it in to the MAIN , you can be certain that it blends well.
4.4.2.4
TEMPO Encoder
The central TEMPO knob controls TRAKTOR's Tempo Master in BPM . All synced Decks automatically follow tempo changes.
TEMPO Encoder
The TEMPO encoder changes tempo in increments of .01 BPM. Hold SHIFT to change in increments of 1 BPM.
A shortcut provides tempo control functionality via the Deck's display.
You can only set an individual tempo for un-synced Decks. If you adjust a synced Deck's tempo, the Tempo Master's BPM change along with it.
So for behavior similar to using a dedicated Tempo slider, make sure the Deck isn't synced.
1.
Press Display Button 1 to open the BPM pop-up.
TRAKTOR KONTROL S8 - Manual - 228
Hardware Reference
The Mixer
2.
Turn the BROWSE knob to adjust MASTER tempo in .01 BPM increments. To adjust in full
BPM steps, hold SHIFT while turning the knob.
→ The Track/Remix content playback speed is adjusted.
If you need to manually sync a Deck to an external source like a turntable, use the tempo ad-
justment in combination with the Deck's touch strip as described in section ↑ 3.1, Using Touch
Note that for Decks which are either set as the MASTER Deck or are synced to MASTER,
S8 displays MASTER CLOCK BPM . If the Deck in focus is not in sync with TRAKTOR's
Master Clock, the BPM overlay shows the Track Deck's or Remix Deck's individual BPM .
The BPM overlay can only be accessed on Track- or Remix Decks.
TRAKTOR KONTROL S8 - Manual - 229
Hardware Reference
The Mixer
4.4.2.5
BOOTH Knob
The BOOTH knob allows you to send the MAIN signal to a second set of loudspeakers via the
BOOTH OUT connectors and control their volume independently of the volume set by the VOL-
UME knob. One common use is to have your own monitor speakers on stage, so you can control their volume independently from the venue's P.A. system.
BOOTH Knob
The BOOTH knob works the same regardless of whether the mixer is being used in
TRAKTOR mode, with a mixed setup, or as a stand-alone mixer.
4.4.2.6
GLOBAL Section
Snap and Quantize modes can be enabled/disabled directly from the S8 by pressing the corresponding buttons S and Q buttons in the GLOBAL section.
GLOBAL Section
These S8 controls only affect TRAKTOR's Decks.
Snap Button
The Snap button, labeled S , allows you to activate/deactivate Snap mode. With Snap mode active, every Cue Point or Loop Point you set will snap to the closest beat.
TRAKTOR KONTROL S8 - Manual - 230
Hardware Reference
The Mixer
Quantize Button
The Quantize Button, labeled Q , allows you to activate/deactivate Quantize mode. With Quantize active, all skip actions within a track (Hotcues, Beatjumps, etc.) are beat-accurate.
If you trigger a jump before a beat, TRAKTOR delays the action so that the effect occurs on the beat. This way, your track always stays in sync, allowing a perfect real-time remixing.
4.4.2.7
MIC 1 and 2 Buttons
S8 features MIC 1 and 2 inputs which allow you to connect dynamic microphones and route them through TRAKTOR's effects and mixer by means of Live Input Decks.
MIC 1 and 2 Buttons
The MIC inputs are assigned to Deck C and D by default.
MIC inputs can only be activated on Decks which are currently not playing back, as they are switched to Live Input mode in the process.
â–ş Press a MIC ( 1 or 2 ) button to activate the connected microphone. The MIC button and the assigned channel's TRAKTOR button light up bright green when enabled.
â–ş If the microphone can't be assigned to the channel you select, the TRAKTOR and MIC buttons flash alternately.
Changing the channel assignment
1.
Check the assignment by holding the MIC 1 / 2 button. The assigned channel's TRAKTOR button lights up bright green. All channels you can assign the MIC to are marked dim green.
2.
Hold the MIC 1 button.
3.
Press another channel's TRAKTOR button to assign the microphone to it.
TRAKTOR KONTROL S8 - Manual - 231
→ If the assignment is successful, the newly assigned channel's TRAKTOR button lights bright green.
For more information on connecting a microphone and setting up your S8 accordingly, refer to section
.
Hardware Reference
The Mixer
4.4.2.8
MAIN Knob
The MAIN knob controls the overall output level of your mix going to S8's MAIN OUT s.
MAIN Knob and MAIN Level meters
The LED meters to the left and right show the output level. If the MAIN knob is turned left
(towards its minimum value) the associated main level meters will go down, accordingly.
Adjust the MAIN knob so that the loudest passages of your performance stay in the upper part of the blue area without exceeding the orange LEDs
4.5
The Rear Panel
The rear panel holds numerous connectors you can use to connect additional equipment such as active speakers, microphones, turntables, or CD players.
TRAKTOR KONTROL S8 - Manual - 232
Hardware Reference
The Rear Panel
Rear Panel Sections
(1) MAIN OUT section: The MAIN OUT section connects to active Speakers or a main P.A.. For
more information on the connectors, refer to section ↑ 4.5.1, MAIN OUT Section
.
(2) BOOTH OUT section: The BOOTH OUT connects to a second P.A., typically for use on stage.
For more information on the connectrors, refer to section ↑ 4.5.2, BOOTH OUT Section .
(3) INPUT CHANNELS A-D: The INPUT CHANNEL ’s A-D connect to e.g. CD-Players or turntables.
For more information, refer to section
↑ 4.5.3, External INPUT Section
.
(4) Ground post: When using a turntable, attach its ground lead here to avoid hum.
(5) MIC input section: MIC input section connects up to two microphones. For more informa-
tion, refer to section ↑ 4.5.4, MIC Input Section
.
(6) Kensington Lock slot: This slot attaches a Kensington lock for protecting your device against
theft. For more information, refer to section ↑ 4.5.5, Kensington Lock Slot .
(7) MIDI IN/OUT connectors: The MIDI IN/OUT section connects devices for MIDI control. For more information, refer to section
(8) USB connector: The USB connector connects your device to your computer. For more infor-
mation, refer to section ↑ 4.5.7, USB Connector .
(9) POWER section: The POWER section attaches the power supply and switches the S8 on and
off. For more information, refer to section ↑ 4.5.8, POWER Section
.
For technical details about all the connections see chapter
.
TRAKTOR KONTROL S8 - Manual - 233
Hardware Reference
The Rear Panel
4.5.1
MAIN OUT Section
MAIN OUT Section
The MAIN OUT section offers two sets of output sockets:
(1) Unbalanced RCA: connect the RCA outputs to practice with your home stereo or to another
DJ mixer or recording device.
(2) Balanced XLR: the balanced XLR outputs allow you to connect professional-grade cables which are much more resistant to electrical interferences than unbalanced cables, especially over longer distances. Connect XLR cables from the S8 to your active speakers or power amp.
4.5.2
BOOTH OUT Section
BOOTH OUT Section
The 1/4-inch balanced BOOTH outputs carry the same signal as the MAIN OUT connectors mix. The most common use for these outputs is connecting additional speakers on stage. Adjust the BOOTH OUT 's level with the dedicated BOOTH knob located in the center of S8's mixer.
TRAKTOR KONTROL S8 - Manual - 234
Hardware Reference
The Rear Panel
4.5.3
External INPUT Section
RCA INPUT Section
The INPUT Channel A-D connectors allow you to integrate your turntables, CD players, or any external audio source you want to use during your performance. This section contains:
(1) LINE/PHONO switch: depending on the device you connect, set this switch to LN or PH .
Turntables usually require PH , all line level audio sources LN .
(2) Line/Phono Inputs RCA sockets: turntables, CD players, and line level audio sources can be connected to these inputs using an RCA cable.
(3) Ground post: connect your turntables' grounding leads here to avoid humming noise.
For more information on using the S8 in combination with turntables (or CD players),
and TRAKTOR SCRATCH PRO 2 refer to section ↑ 5, Common Setups .
TRAKTOR KONTROL S8 - Manual - 235
Hardware Reference
The Rear Panel
4.5.4
MIC Input Section
MIC Input Section
The MIC section provides two microphone inputs:
(1) MIC 2 input (balanced TRS): connect your microphone to this input via either XLR or balanced 6.3mm (or 1/4-inch) connector.
(2) MIC 1 input (unbalanced): connect your microphone here via a standard 6.3mm (or 1/4-inch) connector.
For more information on connecting a microphone and setting up your S8 accordingly, refer to section
.
4.5.5
Kensington Lock Slot
Kensington Lock Slot
TRAKTOR KONTROL S8 - Manual - 236
Hardware Reference
The Rear Panel
Use a Kensington-slot compatible lock to lock your S8 to a heavy object like a table to prevent theft.
4.5.6
MIDI Connectors
MIDI Connectors
Connect external MIDI devices you want to integrate into your TRAKTOR KONTROL S8 setup.
4.5.7
USB Connector
USB Connector
Connect S8 to your computer here, using the included USB cable. The connection is USB 2, but is compatible to USB 3-equipped computers.
Due to the large amounts of data transmitted to the TRAKTOR KONTROL S8, it may not work properly when connected to a USB hub. Make sure to connect S8 directly to a USB port on your computer if possible.
TRAKTOR KONTROL S8 - Manual - 237
Hardware Reference
The Rear Panel
4.5.8
POWER Section
POWER Section
In the POWER section, you make the connection to the power supply and to your computer:
(1) Power Supply connector (15V - 2.66 A): connect the included power supply.
(2) ON/OFF switch: press this switch to turn your device on or off.
Do not use the TRAKTOR KONTROL S8 with a power supply other than the one included in delivery. In case of loss or damage, make sure to purchase a replacement power supply approved by Native Instruments for use with the S8.
Before you use the power supply and connect to the S8, please refer to the TRAK-
TOR KONTROL S8 IMPORTANT SAFETY INSTRUCTIONS leaflet (included in the box).
This leaflet explains how to attach the specific adaptor plug for your region.
4.6
The Front Panel
This section gives an overview of the elements on S8's front panel, then describes the connectors, switches, and knobs in more detail.
TRAKTOR KONTROL S8 - Manual - 238
Hardware Reference
The Front Panel
S8's Front Panel
(1) Crossfader Assign switches: A Crossfader Assign switch assigns a channel to either side of the Crossfader. For more information, refer to section
↑ 4.6.1, Crossfader Assign Switches .
(2) Crossfader Curve knob: The Crossfader Curve knob adjusts the cross-fading behavior. For more information, refer to section
↑ 4.6.2, Crossfader Curve Knob .
(3) PHONES Section: In the PHONES section you can connect your headphones. For more infor-
mation, refer to section ↑ 4.6.3, PHONES Section .
4.6.1
Crossfader Assign Switches
Crossfader Assign Switches
Each channel can be assigned to either the left or right side of the Crossfader. The center position ( THRU ) lets the channel bypass the Crossfader altogether.
TRAKTOR KONTROL S8 - Manual - 239
Hardware Reference
The Front Panel
4.6.2
Crossfader Curve Knob
XF CURVE Knob
This knob changes the crossfader curve. Different scenarios require different curves:
Smooth transitions and mixing tracks: Turn XF CURVE all the way to the left. The cross-fading works gradually, which means that with the Crossfader in its center position, the left and right sides are mixed equally.
Scratching and Effects: Turn XF CURVE all the way to the right. The Crossfader works almost like a switch at its left and right ends.
You can also customize the fading curve of the Crossfader in Preferences > Mixer >
Crossfader.
4.6.3
PHONES Section
PHONES Section
TRAKTOR KONTROL S8 - Manual - 240
Hardware Reference
The Deck
The PHONES section offers two headphones connectors. You can audition tracks via the CUE , as well as listen to the MAIN mix.
(1) Small Headphone Jack: Connect 3.5 mm (1/8-inch) stereo headphone plugs.
(2) Large Headphone Jack: Connect 6.3 mm (1/4-inch) stereo headphone plugs.
Adjust the Headphone levels with the CUE VOL knob on S8's top panel.
4.7
The Deck
This section provides a detailed description of how the knobs, buttons, faders and the Touch
Strip on S8's Decks relate to the TRAKTOR workflow.
S8 features two identically equipped Deck sections at the far left and right sides of the unit.
These give you hardware control over the software Decks in the TRAKTOR software. Active
TRAKTOR Decks always work in one of the Deck modes, as Track Deck, Stem Deck, Remix
Deck or Live Input.
Since the left and right Decks work identically, we'll just talk about the left one. Implicitly, though, the descriptions also apply to the right Deck.
If you connect an external device to S8, you can also bypass the Deck completely by switching the corresponding Mixer channel from TRAKTOR mode to Thru mode. This will automatically de-activate the Deck.
For more details about the Deck modes, please refer to the TRAKTOR Manual.
The left-hand hardware Deck controls TRAKTOR's Decks A and C. The entire section can be focused on either the primary (A) or secondary (C) Deck. The positions of Decks on S8 are consistent with the Deck layout in TRAKTOR:
â–Ş The left-hand Deck controls TRAKTOR Decks A (on top) and C (below).
â–Ş The right-hand Deck controls TRAKTOR Decks B (on top) and D (below).
The following image and table give a detailed overview of the Deck's elements and provide links referring to sections with further information.
TRAKTOR KONTROL S8 - Manual - 241
Hardware Reference
The Deck
Interface elements on the Left Deck
(1) DECK button: The DECK Button allows you to switch the focus (and controls) between the primary and secondary Decks in a Deck section. For more information, refer to section
(2) FLUX button: The FLUX button enables Flux Mode for the focused Deck. For more informa-
tion, refer to section ↑ 4.7.2, FLUX Button
.
TRAKTOR KONTROL S8 - Manual - 242
Hardware Reference
The Deck
(3) Mode Select Buttons: The Deck can operate in several modes which can be easily enabled by the Mode Select Buttons. For more information, refer to section
.
(4) Loop encoder: Primarily, the Loop encoder is dedicated to looping functions but it also for determining values in other preferences. For more information, refer to section
(5) EDIT button: The EDIT button enters Beat Grid mode for re-aligning Beat Grids of tracks. For more information, refer to section
.
(6) CAPTURE button: The CAPTURE button opens the CAPTURE pop-up and allows you to quickly select the capture source for a Remix Deck. For more information, refer to section
(7) Display Area and BROWSE controls: The display reflects the information of TRAKTOR’s Decks and provides further display controls as well as BROWSE controls. For more information, refer
to section ↑ 4.7.4, Display Area and Controls .
(8) Performance controls: These knobs and buttons control effects for Remix Slots on a Remix
Deck as well as effects for Stem Parts on Stem Decks. For more information, refer to section
↑ 4.7.5, Performance Controls .
(9) Slot Volume Faders: The Deck provides four Slot Volume Faders allowing you to mix signals of Remix Slots of REMIX Decks as well as Stem Parts of Stem Decks. For more information, refer to section
(10) Pads: The Deck comes with a set of eight pads. Depending on the mode selected via the
Mode Select buttons, these pads are assigned different functions. For more information, refer
.
(11) Touch Strip: The Touch Strip reflects the behavior of Jog Wheels of traditional DJ controllers. For more information, refer to section
(12) TRANSPORT controls: The TRANSPORT controls control playback of the Deck. It also provides the SHIFT button to access secondary functions of other buttons. For more information, refer to section
.
TRAKTOR KONTROL S8 - Manual - 243
Hardware Reference
The Deck
4.7.1
DECK Button
The DECK button allows you to switch the focus (and controls) between the primary and secondary Decks in a Deck section.
DECK Button
The DECK button lights blue when a primary Deck ( A or B ) is focused and white when the secondary Deck ( C or D ) is focused.
4.7.2
FLUX Button
The S8's FLUX button enables Flux Mode for the focused Deck.
FLUX Button
Flux Mode
In Flux mode, for every Deck, a second playhead continues playing the track, even if you loop a section, temporarily jump back to a cue point, skip forward or backward, etc. That way, the track keeps progressing, no matter what you do.
4.7.3
CAPTURE Button
The CAPTURE button allows you to quickly select the capture source for sampling to the Remix Deck.
TRAKTOR KONTROL S8 - Manual - 244
Hardware Reference
The Deck
CAPTURE Button
By holding the CAPTURE button and touching the BROWSE encoder the display shows the current capture source. The rotation of the BROWSE encoder selects another capture source.
The capture size is determined by the source Deck's loop size setting.
4.7.4
Display Area and Controls
On the S8's graphic color displays, some functionality is dynamically shown or hidden by means of the Display buttons adjacent to the display. The following image gives a detailed overview of the Display area and its controls, as well as a table with links referring to sections with further information.
TRAKTOR KONTROL S8 - Manual - 245
Hardware Reference
The Deck
Display Area and Controls
(1) BACK Button: The BACK button lets you navigate back up a level in the Browser. For more information, refer to section
(2) BROWSE Encoder: The BROWSE encoder opens the Browser on a Deck’s display and let you scroll through lists and load tracks. For more information, refer to section
(3) Settings Button: The Settings button opens the device settings, allowing you to adjust RGB calibration (color rendition) and screen brightness, as well as TOUCH sensitivity of the knobs.
For more information, refer to section
.
(4) Display Buttons: The function of these four buttons depends on context - whether the display is currently showing a Track Deck, Remix Deck or Beat Grid Edit. For more information, refer to section
.
TRAKTOR KONTROL S8 - Manual - 246
Hardware Reference
The Deck
(5) Display: By means of the 4.3-inch color displays, you can use a lot of TRAKTOR's features without looking at your computer's display. For more information, refer to section
.
(6) View Button: This button toggles between Single View and Split view, which gives you a very basic overview of the corresponding secondary Deck. For more information, refer to section
(7) Performance Mode Buttons: These two buttons are used to select the Performance Mode (i.e.
FILTER , PITCH , FX SEND, and MIDI ) for the Performance Controls (i.e. the four Performance knobs and ON buttons underneath the displays). These modes apply to Remix Decks and Stem
Decks. For more information, refer to section ↑ 4.7.4.7, Performance Mode Button .
4.7.4.1
BACK Button
When in the Browser displayed, the BACK button lets you navigate a level up in the folder structure, up to the Browser's top level. Pressing the BACK button for longer than a second lets you exit the Browser.
BACK Button
4.7.4.2
BROWSE Encoder
The BROWSE encoder lets you access the Browser and navigate through your track collection and playlists.
BROWSE Encoder
TRAKTOR KONTROL S8 - Manual - 247
Hardware Reference
The Deck
The BROWSE encoder can be pressed and rotated. Primarily it has following functionalities:
â–Ş Pressing the BROWSE encoder opens the Browser in the display.
â–Ş Turning the BROWSE encoder lets you scroll through the list items. Pressing it again enters a sub folder and again loads an item.
Besides browsing, the BROWSE encoder can be used for adjusting parameters and selecting options in other menus and pop-ups.
You can configure the Browse encoder to open the Browser on touch. To do so, activate the Auto Open Browser on Touch option in TRAKTOR's TRAKTOR KONTROL S8 Preferences.
4.7.4.3
Settings Button
The Settings button opens S8's device settings screen.
Settings Button
Display Settings (RGB)
Within the settings, you can adjust the screens' color rendition (saturation of RED , GREEN and
BLUE colors), as well as the screen's BRIGHTNESS . The rotation of the Performance knobs beneath the display adjust the parameters.
Display Settings View
TRAKTOR KONTROL S8 - Manual - 248
4.7.4.4
Display Buttons
The Display buttons provide different functionality depending on current view.
Hardware Reference
The Deck
Display Buttons
This is an overview of what these buttons do depending on what you see on the display.
Track Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the KEY window.
(3) Display Button 3: Zooms into the waveform.
(4) Display Button 4: Zooms out of the waveform.
Stem Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the KEY window.
(3) Display Button 3: Zooms into the waveform. Secondary function: When in Stem view and holding SHIFT and pressing Display button 3 will show Full Track view.
TRAKTOR KONTROL S8 - Manual - 249
Hardware Reference
The Deck
(4) Display Button 4: Zooms out of the waveform. Secondary function: When in Full Track view and holding SHIFT and pressing Display button 4 will show Stem view.
Remix Deck View
(1) Display Button 1: Opens the BPM pop-up.
(2) Display Button 2: Opens the QUANTIZE pop-up.
(3) Display Button 3: Scrolls up in the Sample Grid in steps of two.
(4) Display Button 4: Scrolls down in the Sample Grid in steps of two.
Please note that you can leave any pop-up by pressing the same button again or, alternatively, the View button.
4.7.4.5
Display
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two upper Decks ( A and B ) are Track Decks, and the lower Decks ( C and D ) Remix Decks.
â–Ş The left display provides feedback about Decks A and C .
â–Ş The right display provides feedback about Decks B and D .
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck. If a mixer channel is set to Thru mode on S8, the corresponding TRAKTOR Deck is set to Thru mode, as well. Here's an overview of the information S8's displays provide for each of these:
TRAKTOR's default layout is 2 Track + 2 Remix Decks (Scratch). This means that S8's two upper Decks ( A and B ) are Track Decks, and the lower Decks ( C and D ) Remix Decks.
â–Ş The left display provides feedback about Decks A and C .
â–Ş The right display provides feedback about Decks B and D .
Every active TRAKTOR Deck is a Track Deck, Stem Deck, Remix Deck or Live Input Deck.
Here's an overview of the information S8's displays provide for each of these:
TRAKTOR KONTROL S8 - Manual - 250
Hardware Reference
The Deck
Track Deck and Stem Deck
Track Deck or Stem Deck View
The Track Deck or the Stem Deck view on S8 provides information about:
(1) Artwork, Song title and Artist name.
(2) Loop size: From 1/32 - 32 beats.
(3) Playhead position: time played and time remaining.
(4) Deck tempo in BPM.
(5) Deck Focus: Deck A - D .
(6) Sync state: If a Deck is assigned Tempo Master, MASTER is displayed underneath the BPM value. SYNC indicates that the Deck is synchronized to a Tempo Master. If a Deck isn't synchronized at all, the Deck header shows tempo deviation in percent from the file's original tempo.
TRAKTOR KONTROL S8 - Manual - 251
Hardware Reference
The Deck
Remix Deck
Remix Deck View
The Remix Deck view on S8 provides information about:
(1) Artwork graphic, Set title and Artist name.
(2) Loop size: from 1/32 - 32 beats.
(3) Quantize Value.
(4) Deck tempo in BPM.
(5) Deck Focus: Deck A - D .
(6) Sync state: If a Deck is assigned Tempo Master, MASTER is displayed underneath the BPM value. SYNC indicates that the Deck is synchronized to a Tempo Master. If a Deck isn't synchronized at all, the Deck header shows tempo deviation in percent from the file's original tempo.
TRAKTOR KONTROL S8 - Manual - 252
Hardware Reference
The Deck
(7) The absolute position on TRAKTOR's timeline measured in Bars.Beats.Phrases.
Live Input Deck
S8's rear panel allows you to connect microphones, turntables, or CD players. You can route these audio signals into the TRAKTOR software and mix them with your other Decks by setting a Deck to Live Input mode in the TRAKTOR software. In this mode, S8's display reads Live
Input - Traktor Audio Passthru .
S8's Transport Controls are disabled while a Deck runs as Live Input.
Thru Mode
If you don't need to run an external device like turntable or CD player through a Deck, switch that mixer channel to Thru mode on S8 by pressing the TRAKTOR button. The signal is mixed in S8's mixer and never sent to TRAKTOR then.
4.7.4.6
View Button
The View button switches between view types in the display.
View Button
It switches between view types:
â–Ş Single View: Only the focused Deck is displayed.
â–Ş Split View: Both Decks are displayed; the focused Deck is visualized by a big waveform and detailed information, while the unfocused Deck is reduced to a small waveform, showing markers and a playhead.
Whenever you open a pop-up from a Deck view (e.g. FX Selection Menu, Browser, BPM , or KEY ) the View button starts flashing. Press the View button to close the pop-up.
TRAKTOR KONTROL S8 - Manual - 253
Hardware Reference
The Deck
4.7.4.7
Performance Mode Button
The Performance Mode buttons marked with left and right arrows let you cycle through the Performance modes FILTER , PITCH , FX SEND and, if enabled, MIDI .
Left Performance Mode Button
If you activate 4 FX Units in TRAKTOR's preferences, the Performance Mode buttons allow you to select FX Units 3 and 4.
4.7.5
Performance Controls
Underneath the display, the Deck features four knobs and buttons which control FILTER ,
PITCH , FX SEND or, if enabled, MIDI per Remix Slot in a Remix Deck.
Performance Controls
Performance Mode FILTER
The default Performance Mode for a Remix Deck is FILTER . The Performance ON buttons are used to engage/disengage a Remix Slot's FILTER . The FILTER cutoff is controlled by the corresponding Performance knob. Adjustments to FILTER cutoff are shown via the Performance pop-up at the lower end of the displays.
The Performance Controls work even if the Remix Deck isn't focused.
TRAKTOR KONTROL S8 - Manual - 254
Hardware Reference
The Deck
If you set up TRAKTOR with 4 FX Units, the Performance knobs and buttons in Deck A control FX Unit 3, those in Deck B control FX Unit 4. By default, they have no function for Track Decks.
Performance Mode FX SEND
When FX SEND is selected, the knobs control the amount of signal being sent to the assigned
FX Unit(s), per Slot. The FX SEND amount is displayed right above the corresponding Performance knob.
In case you increase FX SEND and still don't hear any effect, please make sure the Remix Deck is actually assigned to an FX Unit in the corresponding Mixer channel.
For information on how to use Performance Controls for operating FX Units (3 and 4), refer to section
↑ 4.3.3, Additional FX Unit 3 and 4
.
Performance Mode PITCH
When PITCH is selected, the Performance knobs transpose the pitch of the playing sample. In other words: pitch correction is applied per Remix Cell. The amount of pitch change is displayed above the corresponding knob.
4.7.6
Slot Volume Faders
S8 offers a separate volume fader per Remix Slot or Stem Part. This allows you to mix signals from up to four Remix Slots within a single Remix Deck, or to mix signals from up to four Stem
Parts within a single Stem Deck before it runs through the channel fader and the Crossfader.
TRAKTOR KONTROL S8 - Manual - 255
Hardware Reference
The Deck
Slot Volume Faders
Slot Volume Faders used on Remix Decks
â–Ş In case only one Deck per side is a Remix Deck, the faders control that Remix Deck's slot volume even if another Deck is focused.
â–Ş In case both the primary and secondary Deck are configured as Remix Decks, the Slot Volume faders control the focused Deck's slots.
Slot Volume Faders used on Stem Decks
â–Ş In case only one Deck per side is a Stem Deck, the faders control that Stem Deck's Stem
Part.
â–Ş In case both the primary and secondary Deck are configured as Stem Decks, the Slot Volume faders control the focused Deck's Stem Parts.
4.7.7
Pads
Each of S8's Decks comes with a set of 8 pads. Depending on the mode selected via the Mode
Select buttons, these pads are assigned different functions.
TRAKTOR KONTROL S8 - Manual - 256
Hardware Reference
The Deck
Pads
Here's an overview of what the pads do in each mode:
HOTCUE mode
During playback, pressing in an inactive pad sets a cue point. The pad lights up and the cue point is automatically assigned to this pad. Pressing that pad again let jump back the playhead to the cue point just defined.
LOOP mode
In Loop mode, pressing a pad instantly loops playback for the number of bars set as Loop
Mode Size in Preferences > Traktor Kontrol S8 > Loop Mode Sizes > Loop. These values are by default:
â–Ş 1/8 Bar Loop
â–Ş 1/4 Bar Loop
â–Ş 1/2 Bar Loop
â–Ş 1 Bar Loop
The Loop functionality considers the global Quantize setting:
â–Ş If Quantize is active, TRAKTOR delays starting the loop until the next down-beat, making sure looping keeps the track in sync.
â–Ş If Quantize is deactivated, looping starts precisely when you press the pad.
TRAKTOR KONTROL S8 - Manual - 257
Hardware Reference
The Deck
FREEZE and Slicer Mode
In Freeze mode, TRAKTOR takes the playhead position, adds the number of bars set as loop size and splits this section of a track into eight equally sized slices. These are then mapped to the pads. Press a pad to start playback from that slice.
While in Freeze mode, you can access Slicer mode. This is how Slicer mode is different from
Freeze mode:
â–Ş In Slicer mode, holding a pad will infinitely loop the corresponding slice.
â–Ş In Slicer mode, holding two pads will loop the range between the start of one pad and the end of the second.
By pressing the Loop encoder while Freeze mode is active this will enable the Slicer mode. The slices in the display and pad color change from blue to green.
REMIX Mode
In Remix mode, the pads trigger the content of corresponding Remix Cells - the tracks, loops or Samples defined in the Remix Set. After loading a Remix Set, the pads take on the Sample
Cells' color. By pressing Display buttons 3 and 4 you can scroll through the rows of Remix
Cells in steps of two.
4.7.8
Touch Strip
S8 doesn't feature the conventional Jog Wheels of a regular DJ controller. Functions usually associated with Jog Wheels are instead controlled by the intuitive Touch Strips.
The Touch Strip
Utilizing the Touch Strip, you can:
â–Ş Seek/navigate within the track.
â–Ş Tempo bend (nudge) for aligning beats.
â–Ş Create a scratch effect
TRAKTOR KONTROL S8 - Manual - 258
Hardware Reference
The Deck
â–Ş Holding the track or Samples.
â–Ş Backspinning the track or the Samples.
Above the Touch Strip, a number of LEDs provide visual feedback for the actions taken on the touch strip.
Phase Meter
For Track Decks, Stem Decks and Remix Decks, the LEDs work as a Beat Phase Meter, showing the focused Deck's beat phase offset from the MASTER Deck. This is the same meter as displayed in TRAKTOR's Deck.
Direction of Scratching
If you didn't learn scratching with LPs and turntables, you may find inversing the Touch Strip's direction more intuitive. If you select this option, swiping to the right on the Touch Strip will move forward in the track's waveform.
â–ş Inverse the directional response by unchecking the Invert checkbox in TRAKTOR's S8 preferences: Preferences> Traktor Kontrol S8>Touchstrip>Scratch Sensitivity.
For detailed information on the Touch Strip's preferences, refer to section
.
Direction of Tempo Bending
In TRAKTOR's default setting, swiping your finger on the Touch Strip has a similar effect to speeding up or slowing down an LP with your hand:
â–Ş Moving to the left speeds up the LP.
â–Ş Moving to the right slows down the LP.
If you didn't learn aligning LPs on turntables, this behavior may not make sense to you. Instead, looking at the waveform, you think in terms of moving the playhead position within the track. Also, you want Tempo Bending to be consistent with Seeking:
â–Ş Swipe to the right to move the playhead ahead.
â–Ş Swipe to the left to move the playhead back.
TRAKTOR KONTROL S8 - Manual - 259
Hardware Reference
The Deck
Inversed Tempo Bending Direction
To achieve this, uncheck the Invert option in: Preferences> Traktor Kontrol S8>Touchstrip>Bend Sensitivity.
Sensitivity
S8 comes with a Sensitivity setting which should accommodate most users in most situations.
You might, however, find that the Touch Strip doesn't react immediate enough to your input or just the opposite, it may recognize input where there was none intended.
You can adjust the Touchstrip's Bend Sensitivity and Scratch Sensitivity separately in: Preferences> Traktor Kontrol S8>Touchstrip.
4.7.9
Transport Controls
The Transport buttons control playback of S8's Decks.
These controls only relate to TRAKTOR mode, they have no function when the S8 is used as a stand-alone device.
TRAKTOR KONTROL S8 - Manual - 260
Hardware Reference
The Deck
PLAY Button
The PLAY button starts/stops the playback of a focused Deck. When playback is active the button lits green brightly. When playback is stopped it is dim.
PLAY Button
CUE Button
The CUE button is tied to the Hot Cue points workflow in TRAKTOR. When the button is pressed it lits blue brightly. When it is released it is dim.
CUE Button
The CUE button functions as follows:
â–Ş If a Deck is playing, pressing CUE let you jump to the Floating Cue Point and stop playback.
â–Ş If a Deck is stopped, holding CUE starts playback as long the CUE button is hold.
â–Ş If a Deck plays while CUE is hold, pressing PLAY let keep playing after releasing the buttons.
â–Ş Press SHIFT + CUE to skip back to the beginning of the track and playback continuous immediately.
SYNC Button
The SYNC button activates/deactivates the synchronization to the Master Deck.
SYNC Button when in Sync
TRAKTOR KONTROL S8 - Manual - 261
Hardware Reference
The Deck
While playing, pressing SHIFT + SYNC sets the Deck as the Tempo Master. The Deck's tempo becomes the tempo reference for all other synced Decks and FX. S8's display shows MASTER in the Deck header of the Master Deck.
The SYNC button takes on different states to provide visual feedback:
â–Ş If the Deck is BPM-synced and in phase with the Tempo Master, the button is bright green.
â–Ş If the Deck is BPM-synced but out of phase with the Tempo Master, the button is bright red.
â–Ş If the Deck is not in sync, the button is dim green.
If a focused Deck gets out of phase, pressing the SYNC button twice let snap back the Deck into sync with the Tempo Master.
SHIFT Button
The SHIFT button is a modifier for other control elements on the S8. It allows you to access secondary functions. When the Shift button is pressed it lits white brightly.
SHIFT Button
â–Ş For the control elements in S8's Deck section, SHIFT operates locally i.e. you cannot use the left SHIFT to access the secondary functions of a Deck or FX Unit on the right side of the controller.
â–Ş For S8's Mixer section, either SHIFT button can be used to access the secondary functions.
You will find examples of using the SHIFT button to access secondary functions throughout this document.
TRAKTOR KONTROL S8 - Manual - 262
Common Setups
Connecting Turntables
5 Common Setups
In addition to being a fully integrated TRAKTOR controller and audio interface, S8 can work in a mixed setup with turntables or CD players and can even serve as a pure 4-channel DJ mixer without any connection to TRAKTOR.
This chapter provides setup information for these different scenarios as well as how to connect microphones.
In order to make use of TRAKTOR's SCRATCH functionality by using turntables or CD
Players, additional Timecode vinyl or CDs are required. These are not included in the S8 product box, but can be purchased separately from the Native Instruments website
Prerequisites
â–Ş The TRAKTOR SCRATCH PRO 2 software is installed and activated as described in the
TRAKTOR KONTROL S8 Setup Guide.
â–Ş The S8 is set up as described in the TRAKTOR KONTROL S8 Setup Guide.
â–Ş The S8 is switched off and its Power Supply is disconnected from the power socket.
â–Ş The amplification system or active speakers connected to the S8 are switched off.
â–Ş All channel faders and volume knobs on the S8 are turned to minimum position.
If you intend to connect turntables to the S8, refer to section ↑ 5.1, Connecting Turntables
.
If you intend to connect CD Players to the S8, refer to section ↑ 5.2, Connecting CD Players
.
5.1
Connecting Turntables
To integrate your turntables in your TRAKTOR set:
TRAKTOR KONTROL S8 - Manual - 263
Common Setups
Connecting Turntables
1.
Connect your turntables to any of the Line/Phono INPUTS A – D on the rear panel of the
S8 using a stereo RCA cable.
TRAKTOR KONTROL S8 - Manual - 264
Common Setups
Connecting Turntables
2.
Attach the ground wires of your turntables to the ground post GND on the rear panel of the S8.
3.
Set the respective channel's LINE/PHONO switch to PH .
→ The turntables are ready for use.
The channel meter displays the input level independently of the channel fader setting.
Ideally, always set input level with the channel fader all the way down.
TRAKTOR KONTROL S8 - Manual - 265
Common Setups
Connecting CD Players
If you want to use S8 as stand-alone DJ mixer, refer to section
If you want to use your turntables as Timecode control, refer to section
↑ 5.4, Integrating External Sources as TIMECODE Controls .
5.2
Connecting CD Players
To include CD players in your TRAKTOR set:
1.
Connect your CD players to any of the Line/Phono INPUTS A – D on the rear panel of the
S8 using a stereo RCA cable.
TRAKTOR KONTROL S8 - Manual - 266
Common Setups
Integrating External Audio Sources in your TRAKTOR Workflow
2.
Set the respective channel's LINE/PHONO switch to LN .
→ The CD players are ready for use.
The channel meter displays the input level independently of the channel fader setting.
Ideally, always set input level with the channel fader all the way down.
If you want to use S8 as a stand-alone DJ mixer, refer to section
If you want to use your CD players as Timecode control, refer to section
↑ 5.4, Integrating External Sources as TIMECODE Controls
.
5.3
Integrating External Audio Sources in your TRAKTOR Workflow
With turntables or CD players connected to a channel, you can either route them through
TRAKTOR in order to add FX via a Live Input Deck, or mix them directly in S8's mixer in Direct
Thru mode.
By pressing the respective channel's TRAKTOR button, you can switch between Live Input mode and Direct Thru mode in real time. While FX can only be assigned in Live Input mode, the 3-band EQ and Filter are available in both.
5.4
Integrating External Sources as TIMECODE Controls
As soon as the turntables or CD Players are connected to the S8 correctly, there are some final steps to complete your TRAKTOR SCRATCH setup.
TRAKTOR KONTROL S8 - Manual - 267
Common Setups
Integrating External Sources as TIMECODE Controls
For a detailed description of how to work with TRAKTOR SCRATCH PRO 2, please refer to chapter 12 in the TRAKTOR Manual.
5.4.1
Final Preparations with Turntables
To complete your TRAKTOR SCRATCH setup with the S8:
1.
Connect the S8's Power Supply to the Power socket.
2.
Switch on the S8.
3.
Switch on your amplification system or active speakers.
4.
Start TRAKTOR on your computer.
5.
For the designated SCRATCH Decks, press the TRAKTOR buttons on the S8 to enable
TRAKTOR mode. This is essential to engaging SCRATCH Control.
6.
In the TRAKTOR software, click on the down arrow below the Deck letter to open the drop-down menu.
TRAKTOR KONTROL S8 - Manual - 268
Common Setups
Integrating External Sources as TIMECODE Controls
7.
Select Scratch Control.
On TRAKTOR's Decks, the CUE and CUP buttons are replaced with Absolute mode and
Relative Mode buttons.
8.
Put the TIMECODE Control Vinyls on your turntables.
9.
Use the S8 to load tracks into the Decks you have just assigned to Scratch Control.
10. Start the turntables, and drop the needles on the TIMECODE Control Vinyl.
→ The calibration process is performed automatically.
5.4.2
Final Preparations with CD Players
To complete your TRAKTOR SCRATCH setup with the S8:
1.
Connect the S8's Power Supply to the Power socket.
2.
Switch on the S8.
3.
Switch on your amplification system or active speakers.
4.
Start TRAKTOR on your computer.
TRAKTOR KONTROL S8 - Manual - 269
Common Setups
Integrating External Sources as TIMECODE Controls
5.
For the designated SCRATCH Decks, press the TRAKTOR buttons on the S8 to enable
TRAKTOR mode. This is essential to engaging SCRATCH Control.
6.
In the TRAKTOR software, click on the down arrow below the Deck letter to open the drop-down menu.
7.
Select Scratch Control.
On TRAKTOR's Decks the CUE and CUP buttons are replaced with Absolute mode and
Relative Mode buttons.
8.
Insert the Control CDs in your CD players.
TRAKTOR KONTROL S8 - Manual - 270
Common Setups
Integrating External Sources as TIMECODE Controls
9.
Use the S8 to load tracks into the Decks you have just assigned to Scratch Control.
10. Trigger playback of the tracks using the CD players.
→ The calibration process is performed automatically when you trigger playback for the first time.
5.4.3
Successful Calibration
TRAKTOR detects which Timecode medium you are using, verifies the signal quality, and if the signal quality is adequate it completes the calibration process. The software platters will then spin at the same speed as the turntables; and the movement of the record will be followed exactly.
In general, we recommend you always check the Scope panel when setting up TRAKTOR
SCRATCH PRO 2, to ensure Timecode control is working properly.
You can open the Scope panel by clicking on the platter, or, if the platter is not shown in the software, by clicking on the small arrow (minimize button) above the Timecode quality meter.
The small arrow (minimize button) above the quality meter will also minimize the Scope panel for a larger view of the track's waveform.
The diagram below shows an example of a successful calibration with control vinyl, with the four indicators shown in the Scope panel:
The four indicators on the Scope panel.
TRAKTOR KONTROL S8 - Manual - 271
Common Setups
Integrating External Sources as TIMECODE Controls
(1) The Scope offers a circular representation of the incoming Timecode signal. If the calibration is successful, there is a blue outer circle and an orange diagonal line.
(2) The quality meter is on the right side. After a successful calibration, this is completely orange.
(3) The stereo input level meter is on the bottom right. After a successful calibration, these two channels are about halfway up.
(4) The status information at the bottom center.
The CALIBRATE button resets Timecode calibration. This is done automatically when you start
TRAKTOR.
Successful calibration using a Control MK2 CD
In a mixed setup with one turntable and one CD player, simply connect them as explained above. Remember to ensure that the LINE/PHONO switches are set accordingly, and mixer channels' TRAKTOR buttons are bright orange—to indicate they are set to
TRAKTOR mode.
If you have followed the information in this chapter and are still having difficulty getting the timecode vinyl or CD to successfully calibrate your decks, you will find detailed information on TRAKTOR SCRATCH and helpful troubleshooting information contained in the TRAKTOR 2 Manual.
TRAKTOR KONTROL S8 - Manual - 272
Common Setups
Using Your S8 as a Stand-alone DJ Mixer
5.5
Using Your S8 as a Stand-alone DJ Mixer
For using turntables or CD Players with S8 as a stand-alone DJ Mixer setup, follow the instructions given in this section:
Prerequisites
â–Ş The S8 is not connected to your computer.
Final preparations
1.
Connect the S8's Power Supply to the Power socket.
2.
Switch on the S8.
3.
Switch on your amplification system or active speakers.
4.
Assign the channels to a side of the Crossfader.
5.
Turn on your turntables or CD Players.
6.
Put the vinyl on your turntables or insert CDs into your CD Players.
7.
Start mixing.
8.
Slowly turn up the MAIN knob until the volume is at the desired level.
→ The S8's corresponding channel meters will light up to show the audio signal they are receiving.
If you still can't hear anything, check that:
â–Ş The GAIN knobs (at the top of channels A - D ) are raised.
â–Ş The channel faders are raised.
â–Ş The FILTER and EQ band knobs ( HI , MID , LOW ) are in center position.
Although you can change TRAKTOR's internal EQ and filter characteristics, it is not possible to change the EQs and filters in stand-alone operation.
TRAKTOR KONTROL S8 - Manual - 273
Common Setups
Connecting Microphones
5.6
Connecting Microphones
Connecting a microphone allows you to expand the scope of your performance. You can talk to your audience or integrate a beat boxing routine, as well as process your vocals or that of a vocal artist with TRAKTOR's internal FX. For connecting microphones to the S8 and assigning them to channels, read the following section.
To connect microphones to your S8:
â–ş Plug your microphone(s) into the MIC 1 or MIC 2 sockets on the rear panel of the S8.
5.6.1
Checking Microphone Assignments
By default, the S8 assigns MIC 1 to mixer channel C , and MIC 2 to channel D . To check the assignment of microphone 1:
TRAKTOR KONTROL S8 - Manual - 274
Common Setups
Connecting Microphones
â–ş Hold the MIC 1 button.
→ Channel A and B's TRAKTOR buttons light up dim green, indicating that the MIC is assignable to them. Channel D 's button is off, indicating the channel which MIC 2 input is already assigned to. Channel C 's TRAKTOR button lights up bright green, indicating the current assignment.
5.6.2
Assigning a Microphone to another Channel
S8's two MIC Inputs can be freely assigned to any of the four channels. To assign microphone
1 from Channel C to Channel A :
TRAKTOR KONTROL S8 - Manual - 275
Common Setups
Connecting Microphones
1.
Hold the MIC 1 button.
Channel A and B 's TRAKTOR buttons light up dim green, indicating that the MIC can be assigned to them.
2.
Press channel A's TRAKTOR button. This button becomes bright green now.
3.
Release the MIC 1 button.
→ You have now assigned the MIC 1 input to channel A .
You cannot assign two MIC ins to the same channel. If you need to assign a MIC input to a channel which already has a MIC input assigned to it, re-assign the second MIC input first.
5.6.3
Switching between Live Input and Direct Thru
After assigning the MIC Input to a channel, that channel is automatically set up as a Live Input.
â–ş Press the channel's TRAKTOR button to toggle between sending the MIC signal into
TRAKTOR (Live Input) and mixing it directly inside S8's mixer (Direct Thru).
TRAKTOR KONTROL S8 - Manual - 276
Common Setups
Connecting Microphones
In Live Input mode, you can process your microphone signal with TRAKTOR's FX Units, allowing you to add performance effects.
In Direct Thru mode, the microphone signal is not sent to the computer. Instead, it is mixed directly in S8's mixer, solving any latency issues you might have at the expense of not being able to add FX.
In Direct Thru mode, TRAKTOR's FX Units don't have any effect on the signal, but the
3-band EQ and the Filter are still available.
5.6.4
Activating a MIC Input
Before activating the microphone for the first time, please lower the channel fader to prevent sudden bursts of noise from your speakers or headphones when activating the
MIC Input.
â–ş Activate the microphone by pressing the MIC 1 button.
→ The microphone is ready for use.
Deactivating a Microphone
With MIC 1 input active:
â–ş Deactivate the microphone by pressing the MIC 1 button again.
TRAKTOR KONTROL S8 - Manual - 277
Preferences Pane in TRAKTOR
6 Preferences Pane in TRAKTOR
Once configured via the Setup Wizard, a dedicated pane for S8 is added to TRAKTOR's Preferences window, which lets you configure the behavior of the touch controls, as well as overall
LED brightness for the back-lit buttons and the Loop and Beatjump Sizes assigned to each
Deck's pads.
The S8 pane in TRAKTOR's Preferences
TRAKTOR KONTROL S8 - Manual - 278
Preferences Pane in TRAKTOR
Restore Default
6.1
Restore Default
This button recalls all factory default settings for the TRAKTOR KONTROL S8 and lets you choose its basic deck configuration via the Setup Wizard.
6.2
Touch Controls
A number of controls are sensitive to touch. TRAKTOR lets you activate touch functions, which will save you the dedicated press of a button for a few features.
â–Ş Auto Open Browser on Touch : If activated, touching a BROWSE knob will open the Browser, after letting go, it will automatically close. If deactivated, press the BROWSE knob to open the Browser.
â–Ş Auto Open FX Panels on Touch : If activated, touching the FX knobs overlays an FX panel with information about the knobs' parameter values, as well as the adjacent FX buttons' functions. If deactivated, you can still control the parameters, but no panel is opened.
â–Ş Auto Open Performance Control on Touch : If activated, touching the Performance knobs below the display overlays a Performance panel with information about the knobs' parameter values, as well as the adjacent Performance buttons' functions. If deactivated, you can still control the parameters, but no panel is opened.
If FX Units 3 and 4 are activated, touching the Performance knobs opens the FX panel for FX Unit 3 and 4, instead of the Performance panel. The Auto Open Performance
Control on Touch setting activates the touch sensing of these knobs, no matter which function they control.
6.3
Touchstrip
Touch technology relies on the electrical properties of your skin, which differ from one person to another. The default value will work for most people under most conditions. However, if you feel the touch strips should react more sensitively, or start registering too soon, you can adjust the behavior here.
TRAKTOR KONTROL S8 - Manual - 279
Preferences Pane in TRAKTOR
Calibrate
â–Ş Bend Sensitivity : by default set to 50%; adjust the Tempo bend sensitivity and check in real time if the change accommodates you better.
â–Ş Scratch Sensitivity : by default set to 50%; adjust the Scratch sensitivity and check in real time if the change accommodates you better.
â–Ş Bend Invert : by default deactivated; swiping to the left slows playback down momentarily.
If activated, swiping to the left nudges playback forward.
â–Ş Scratch Invert : by default activated; swiping to the left advances playback position in the track. If deactivated, swiping to the left goes back in a track.
â–Ş Shift + Touch to Scratch : by default deactivated, holding the SHIFT button +swiping within the Touch Strip performs an absolute seek. If activated, holding the SHIFT button +swiping within the Touch Strip performs a scratch effect or backspin.
6.4
Calibrate
Calibration ensures that each control allows adjustments over their full range and with maximum precision. These settings are precisely calibrated during production, although they might need to be recalibrated over the lifetime of your S8 unit. Recalibration is necessary when a control ceases to allow you to set actual minimum and maximum values.
Calibration is done in groups of control elements, just click the corresponding Recalibrate button:
â–Ş FX Knobs : for recalibrating the FX knobs on both FX Units 1 and 2.
â–Ş Short Faders : for recalibrating the Slot Volume Faders.
â–Ş FX Knobs : for recalibrating the FX knobs on both FX Units 1 and 2.
â–Ş Short Faders : for recalibrating the Slot Volume Faders.
â–Ş Mixer Knobs : for recalibrating EQ ( HI , MID , LOW ) and FILTER knobs.
â–Ş Mixer Fader : for recalibrating the channel faders.
â–Ş Crossfader : for recalibrating the Crossfader .
â–Ş FX Knobs : for recalibrating the FX knobs on both FX Units 1 and 2.
â–Ş Mixer Knobs : for recalibrating EQ ( HI , MID , LOW ) and FILTER knobs.
TRAKTOR KONTROL S8 - Manual - 280
Preferences Pane in TRAKTOR
LEDs
â–Ş Mixer Faders : for recalibrating the channel faders.
â–Ş Crossfader : for recalibrating the Crossfader .
6.5
LEDs
The pad and button backlights on the S8 offer two distinct brightness levels to indicate On and
Off states. Depending on your light conditions during a performance, it can be necessary to adjust these.
On State Brightness : sets the brightness level for engaged buttons and pads.
Dim State Percentage : sets the brightness level for inactive buttons and pads.
6.6
Loop Mode Sizes
When a Deck is in Loop Mode, the corresponding pads are split into two rows. The top row represents four Loop sizes, and the bottom row four Beatjump sizes. Here, you can adjust these settings to suit your needs.
â–Ş Loop : For each of the upper four pads, you can select a Loop size of: 1/32, 1/16, 1/4, 1/2,
1, 2, 4, 8, 16, 32 beats via drop-down menus.
â–Ş Beatjump : For each of the four lower pads you can select a Beatjump size of: - LOOP, - 32,
- 16, - 8, - 4, - 2, - 1, -/2, -/4, -/8, -/16, +/16, +/8, +/4, +/2, +1, +2, +4, +8, + 16, + 32,
+LOOP.
6.7
Enable MIDI Controls
The TRAKTOR KONTROL S8 allows you to use the Performance Knobs, Performance Buttons, and the Performance Faders below the Display as MIDI output controls. You can use these controls to send MIDI messages to other software or external equipment. This feature is not enabled by default and requires some configuration.
TRAKTOR KONTROL S8 - Manual - 281
Preferences Pane in TRAKTOR
Enable MIDI Controls
Enabling MIDI Controls
To enable MIDI Controls for the S8:
1.
In the TRAKTOR window click File, then Preferences to open the preferences window.
2.
Navigate to the Traktor Kontrol S8 page. There, check the Enable MIDI controls preference in the MIDI Controls section.
Preferences with MIDI Controls enabled.
TRAKTOR KONTROL S8 - Manual - 282
Preferences Pane in TRAKTOR
Enable MIDI Controls
Assigning MIDI Messages
To assign the MIDI message and MIDI channel to the various MIDI controls:
1.
Select Controller Manager tab in the Preferences.
2.
Click the Add...
button and select Generic MIDI from the list to create a new Generic
MIDI Device.
TRAKTOR KONTROL S8 - Manual - 283
Preferences Pane in TRAKTOR
Enable MIDI Controls
3.
In the upper-right corner, select the MIDI port to use as the output for this Generic MIDI device.
4.
Click the Add Out...
button.
5.
Navigate to Global > MIDI Controls >… .
Here you can assign the MIDI message and MIDI channel to the various MIDI controls.
You will find a list of Knobs, Faders, and Buttons. The first four entries in each category
TRAKTOR KONTROL S8 - Manual - 284
Preferences Pane in TRAKTOR
Enable MIDI Controls correspond to the left Deck side (assigned to Decks A and C), while the last 4 knobs, faders, and buttons correspond to the right Deck side (assigned to Decks B and D).
6.
Select an entry to add it to the mapping.
7.
Click the Device Mapping drop-down menu to show a list of 16 MIDI Channels. Hover your mouse over the desired MIDI output channel’s entry. A sub-menu holding message types CC , Note , and Pitch Bend will open. You can select Pitch Bend to map the MIDI
TRAKTOR KONTROL S8 - Manual - 285
Preferences Pane in TRAKTOR
Enable MIDI Controls
Pitch Bend message to this control, or you can hover your mouse over one of the other two menus to show a list of specific CC and Note numbers and names. You can then click one of these to map the control to the specified Note or CC.
8.
Repeat the above two steps for each of the MIDI controls you want to map.
9.
Close the Preferences by clicking Close .
Switching to MIDI Mode on the S8 Controller
To switch the Performance Controls into MIDI Mode on the S8:
TRAKTOR KONTROL S8 - Manual - 286
Preferences Pane in TRAKTOR
Enable MIDI Controls
â–ş Press the Performance Mode buttons next to the display until the MIDI page appears.
â–ş Touch a Performance knob to enlarge the MIDI pane displaying current parameters of the selected MIDI controls.
The MIDI page will not appear if the above Enable MIDI controls preference is not turned on.
TRAKTOR KONTROL S8 - Manual - 287
Preferences Pane in TRAKTOR
Enable MIDI Controls
When the MIDI mode is enabled on the S8, the Performance Knobs and Buttons will output the MIDI messages that you assigned in the Controller Manager. If you intend to assign the Slot Volume Faders to output MIDI messages, make sure neither of the Decks controlled by the S8 is a REMIX Deck. Otherwise the Slot Volume Faders will still control the Remix Slot volumes instead of outputting MIDI.
TRAKTOR KONTROL S8 - Manual - 288
7 The S8 Audio Interface and Control Panel
The S8 Audio Interface and Control Panel
Settings on Mac OS X
Your TRAKTOR KONTROL S8 comes with an integrated high-end 24-bit/48 kHz audio interface. You can adjust the audio interface settings to your needs and computer performance.
This section covers the setup on Windows and Mac OS X.
7.1
Settings on Mac OS X
On Mac OS X, you can adjust the settings for the S8 audio interface from within each music application. In TRAKTOR:
â–ş Open Preferences > Audio Setup to access the settings for the S8 audio interface.
There, adjust S8's audio interface settings, most importantly the latency:
Latency : Lower this value for a quicker response to hardware interactions like playing a Remix
Cell by pressing one of S8's pads.
When converting audio information to digital and vice versa, the audio driver needs to store data in buffers to prevent the audio from cutting off. High buffer size settings will cause a delay between an interaction and the change being audible, called latency. Low buffer sizes will put more strain on the CPU and may lead to audio drop-outs. Find the best balance by setting Latency high, starting playback and lowering it until you encounter the first audible crackles and pops. Now increase the value again until the crackling disappears.
7.2
Settings on Windows: The Control Panel
On Windows, access the settings for the TRAKTOR KONTROL S8 audio interface via the
TRAKTOR KONTROL S8 Control Panel application. The Control Panel is automatically installed along with the S8 drivers during the TRAKTOR installation procedure.
This section describes the TRAKTOR KONTROL S8 Control Panel user interface.
TRAKTOR KONTROL S8 - Manual - 289
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
7.2.1
Opening the Control Panel
You can open the Control Panel in various ways:
â–ş From within TRAKTOR: Go to Preferences > Audio Setup and click the Settings button, located at the right of the Latency slider and display:
Opening the Control Panel from inside TRAKTOR's Preferences
â–ş From your desktop: Go to Start > Programs > Native Instruments > TRAKTOR KON-
TROL S8 > TRAKTOR KONTROL S8 Control Panel.
If you cannot find the Control Panel, the driver is most likely not installed at all. In this case, please re-install the latest version of TRAKTOR and make sure the S8 driver is selected for installation.
7.2.2
Audio Settings Panel
The Audio Settings page allows you to adjust the settings of the audio interface.
TRAKTOR KONTROL S8 - Manual - 290
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
Audio Settings pane in S8's Control Panel application
Audio Processing Section
This section provides settings for the analog-to-digital/digital-to-analog conversion done by your audio interface.
Process Buffer : Lower this value for a quicker response to hardware interactions like playing a
Remix Cell by pressing one of S8's pads.
When converting audio information to digital and vice versa, the audio driver needs to store data in buffers to prevent the audio from cutting off. High buffer size settings will cause a delay between an interaction and the change being audible, called latency. Low buffer sizes will put more strain on the CPU and may lead to audio drop-outs. Find the best balance by setting Latency high, starting playback and lowering it until you encounter the first audible crackles and pops. Now increase the value again until the crackling disappears.
USB Buffer : Use this menu in case you cannot achieve satisfactory Latency settings with the
Process Buffer alone. Lower the USB buffer size for smaller USB buffer packaging, which should further reduce the audible latency. If you notice any audio drop-outs, you should raise the buffer size until you have a clear sound.
TRAKTOR KONTROL S8 - Manual - 291
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
Device Monitor Section
This section displays information about the audio interface's processing status and your system's output latency.
Processing State : The processing state monitor provides feedback on the current status of the device. There are three possible status messages:
â–Ş Idle : controller is connected, but no audio data is being streamed.
â–Ş Streaming : driver is working and processing audio data.
â–Ş Panic : driver stopped streaming. Too many USB I/O errors occurred in the interface communication.
Output Latency : displays your system’s output latency in milliseconds.
Please note, when running external sources like turntables or microphones through
TRAKTOR, an additional input latency will occur.
7.2.3
Diagnostics Panel
The Diagnostics page allows you to monitor the controller’s performance and to detect errors.
This information can be helpful to see the results of Process Buffer value adjustments and may help troubleshooting in case you need to contact our technical support.
TRAKTOR KONTROL S8 - Manual - 292
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
Diagnostics panel in S8's Control Panel application
Drop-Out Detection Section
This section provides data for troubleshooting:
USB I/O Errors : Counts USB data transfer interruptions between your computer and S8.
Buffer Underruns : Buffer underruns occur when your computer isn’t able to process an audio stream in time. Reasons for underruns can be too many devices communicating on the USB bus at the same time or too high CPU load.
Reset : Click this button to reset the error count.
TRAKTOR KONTROL S8 - Manual - 293
The S8 Audio Interface and Control Panel
Settings on Windows: The Control Panel
Connection Monitor Section
This section provides USB connection information:
Number of Clients : Displays the number of clients connected to the interface. Multiple ASIO applications are counted separately, WDM and WASAPI increase the number by one, no matter how many WDM/WASAPI applications play audio.
USB Data Errors : Counts USB data errors. Poor quality or too long cables, as well as interference, can be the source of data errors on the USB bus.
Reset : A click on this button resets the error count.
System Performance Test Section
This section provides real-time measurements of the latency introduced by Windows itself.
This data can give clues about the sources of bad performance.
Current Latency : Displays the real-time value for Windows' internal latency. Monitor this value as you launch and quit applications and connect or disconnect USB devices.
Maximum Latency : Display the maximum value since the last reset. Comparing the difference between Maximum and Current Latency can help find the sources of sudden CPU peaks.
Reset : Resets the Maximum Latency value.
Stop : Pauses the measurement process. Click again to continue measurement.
Information Section
Information: Provides information about whether or not your driver and firmware are up to date.
Driver Version : See the currently installed driver version here.
Firmware Version : See the currently installed firmware version here.
Troubleshooting Guide : Click Show to open the Troubleshooting Guide.
TRAKTOR KONTROL S8 - Manual - 294
The S8 Audio Interface and Control Panel
Using the S8 Audio Interface with Other Music Applications
7.3
Using the S8 Audio Interface with Other Music Applications
S8’s on-board audio interface can be used in any other music application installed on your computer. To do this, you need to configure your music applications accordingly. Most music applications offer a setting in their options or preferences allowing you to select the TRAK-
TOR KONTROL S8 as the audio interface. For more info, please refer to the documentation of your music application.
7.4
Setting up S8 as your Default Audio Interface
S8 can function as your system's default playback device for all sound including system sounds (not only for music software). This section describes how to configure the system settings.
7.4.1
Windows
For Windows 7 (and later) you can define the TRAKTOR KONTROL S8 as your default audio interface as follows:
1.
Open Start > Control Panel > Hardware and Sound > Sound.
2.
Select the Playback tab.
3.
In the device list, select TRAKTOR KONTROL S8 WDM Audio and click Set Default .
4.
Select the Recording tab.
5.
In the device list, select TRAKTOR KONTROL S8 WDM Audio and click Set Default .
6.
Click OK to close the dialog.
7.4.2
Mac OS X
For Mac OS X, you can define the TRAKTOR KONTROL S8 as your default audio interface as follows:
1.
From the Apple menu, select System Preferences.
TRAKTOR KONTROL S8 - Manual - 295
The S8 Audio Interface and Control Panel
Setting up S8 as your Default Audio Interface
2.
In the panel that opens, click Sound .
3.
On the Sound Effects tab, select TRAKTOR KONTROL S8 in the Play alerts and sound effects through menu.
4.
Click the Output tab, and select TRAKTOR KONTROL S8 from the Select a device for sound output list.
5.
Click the Input tab, and select TRAKTOR KONTROL S8 from the Select a device for sound input list.
6.
Close the window to confirm your changes.
TRAKTOR KONTROL S8 - Manual - 296
Troubleshooting - Getting Help
Troubleshooting
8 Troubleshooting - Getting Help
This chapter covers the most common issues. Most of what can go wrong when setting up and using TRAKTOR KONTROL S8 should be listed here along with some tried-and-tested ways to solve these issues.
8.1
Troubleshooting
There are a few things you should check in case S8 doesn't work with your system.
8.1.1
TRAKTOR Won’t Start
â–Ş Check the system requirements for TRAKTOR KONTROL S8. Meeting the minimum requirements ensures that TRAKTOR will work, but advanced use (i.e. Keylock, FX) may require a more powerful system.
â–Ş Launch the Service Center application and make sure you have the most recent TRAKTOR version installed.
â–Ş Make sure that you haven't double-clicked an outdated application alias/shortcut.
â–Ş Try to restart your computer. Disconnect any other audio interfaces and computer peripherals like printers, scanners, and the like to see if that solves the problem.
â–Ş Try to rename the file collection.nml in the TRAKTOR 2 Root folder and restart TRAKTOR.
This way, TRAKTOR will create a blank Collection. Re-import the renamed .nml file to restore your Collection.
The Root folder is located in:
Windows: \My Documents\Native Instruments\Traktor 2\
Mac OS X: YourUserFolder/Documents/Native Instruments/Traktor
TRAKTOR KONTROL S8 - Manual - 297
Troubleshooting - Getting Help
Troubleshooting
8.1.2
TRAKTOR Crashes
In case of a crash during operation, please contact the Native Instruments technical support team and send them your crash log. You will find the crashlog in the following folders:
â–Ş Windows: \My Documents\Native Instruments\Traktor 2\Crashlogs\
â–Ş Mac OS X: YourUserFolder/Library/Logs/CrashReporter/
8.1.3
TRAKTOR Has Performance Issues
Please check if your computer is suited for handling real-time audio processing without dropouts. The TRAKTOR KONTROL S8 Control Panel application offers a tool for measuring System Performance and for monitoring the number of audio dropouts, which cause audible clicking noises.
These steps are recommended to optimize your laptop’s audio performance:
â–Ş Increase the Process Buffer value in TRAKTOR'S Preferences > Audio Setup > Settings.
â–Ş If possible, don't run the laptop on battery power, as the computer's power management will dynamically adjust the clock rate of the CPU in order to conserve battery.
â–Ş If your laptop has a shared memory graphics card, please ensure your system has more
RAM than listed in the System Requirements.
â–Ş Disconnect all unused hardware (e.g. printer, scanner). This will increase the amount of processing power available for your music software.
â–Ş Make sure that S8 is connected directly to the computer via the included USB cable. The use of USB hubs is not recommended.
â–Ş A bad USB cable can be responsible for connectivity problems. Try using a different cable bearing the official USB logo to see if your cable is the cause of the issues.
â–Ş Laptops are often equipped with built-in devices that disturb audio processing, most commonly a network adapter or a wireless LAN card. You might need to disable these devices while working with S8.
Windows users: The Online Knowledge Base contains additional tuning tips for your operating system. See the following articles:
TRAKTOR KONTROL S8 - Manual - 298
Troubleshooting - Getting Help
Troubleshooting
â–Ş Windows 7 tuning tips for audio processing: http://www.native-instruments.com/knowledge/questions/847/
â–Ş Windows 8 tuning tips for audio processing: http://www.native-instruments.com/knowledge/questions/1395/
8.1.4
Updates
Whenever you encounter problems, it is recommended that you first download and install any available software updates in Service Center or on our website: http://www.native-instruments.com/updates
Updates are released regularly to fix known problems, maintain compatibility with operating system updates, and to continuously improve the software.
8.2
Getting Help
If you are experiencing problems related to your Native Instruments product that the supplied documentation does not cover, there are several ways of getting help!
The links in the following sections are also accessible from the Service Center application:
â–ş Open the Service Center application and click on the Support button in the upper-right corner.
8.2.1
Knowledge Base
The Online Knowledge Base gathers useful information about your Native Instruments product which helps solve issues you may have. You will find the Knowledge Base at: http://www.native-instruments.com/knowledge
TRAKTOR KONTROL S8 - Manual - 299
Troubleshooting - Getting Help
Getting Help
8.2.2
Technical Support
If no Knowledge Base entry matches your problem, or if the matching entry does not solve the problem, you can use the Online Support Form to contact the Technical Support team of Native Instruments. The Online Support Form will ask you to enter information about your hardware and software setup. This information is essential for our Support team to be able to provide you with quality assistance. You can reach the Online Support via: http://www.native-instruments.com/suppform
When communicating with the Native Instruments support team, keep in mind that the more details you can provide about your hardware, your operating system, the version of the software you are running, and the problem you are experiencing, the better they will be able to help you.
In your description, you should mention:
â–Ş How to reproduce the problem
â–Ş What you have already tried to fix the problem
â–Ş A description of your setup, including all hardware
â–Ş The brand and specifications of your computer
â–Ş The software version number
The version number of your software is displayed in the TRAKTOR splash screen you see when the application launches. After startup, the same splash screen can be opened by clicking the TRAKTOR logo in the upper right corner of the user interface.
When installing new software or software updates, a Readme file is included that contains last minute information that was not yet included in the documentation. Please open and read this
Readme file before contacting Technical Support.
8.2.3
Registration Support
If problems occur during the product activation procedure, please contact our Registration
Support team: http://www.native-instruments.com/suppform
TRAKTOR KONTROL S8 - Manual - 300
Troubleshooting - Getting Help
Getting Help
8.2.4
User Forum
In the Native Instruments User Forum, you can discuss product features directly with other users and with experts moderating the forum. Please be aware that the Technical Support team does not participate in the forum. If you’re encountering an issue that can’t be solved by other users, contact Native Instruments’ Technical Support team via the online support form as described above. Find the User Forum at: http://www.native-instruments.com/forum
TRAKTOR KONTROL S8 - Manual - 301
Technical Specification
9 Technical Specification
Input/output connectors
A D : Four pairs of RCA input connectors
MIC 1 : One 6.3 mm (1/4") TRS (balanced) microphone input connector
MIC 2 : One combo XLR jack or 6.3 mm (1/4") TRS (balanced) microphone connector
BOOTH OUT : Two balanced 6.3 mm (1/4") TRS line out connectors
MAIN OUT : Two balanced XLR outputs
MAIN OUT : Two RCA outputs
PHONES : One stereo 6.3 mm (1/4") headphone output
PHONES : One stereo 3.5 mm (1/8") headphone output
MIDI ( IN / OUT ) Two 5-pin DIN connectors
GND : One ground terminal screw
K : One Kensington lock slot
USB : One USB 2.0 Type B connector
POWER : One power supply connector
Audio Specifications
Audio Inputs (A/D)
Channels
Sample Rate
Bit Resolution
Converter
4 Stereo
48 kHz
24-bit
Cirrus Logic
TRAKTOR KONTROL S8 - Manual - 302
Line Inputs
Full Scale Level
DNR (a-weighted)
THD+N
Frequency Response
Cross talk @ 1kHz
Microphone Inputs
Full Scale Level @ 1 kHz
DNR (a-weighted) @ 1 kHz
THD+N @ 1 kHz
Frequency Response
Phono Inputs
Input impedance
Full Scale Level @ 1 kHz
DNR (a-weighted) @ 1 kHz
THD+N @ 1 kHz
Crosstalk @ 1kHz
Audio Outputs (D/A)
Channels
Sample Rate
Technical Specification
47 kΩ
-23.8 dBu
84 dB
0.002%
-105 dB
2 Stereo
48 kHz
+13 dBu
113 dBu
0.001%
20 Hz – 20 kHz (±0.1 dB)
-116 dB
-7.2 dBu
104 dB
0.006%
20Hz - 20kHz (±0.6 dB)
TRAKTOR KONTROL S8 - Manual - 303
Audio Outputs (D/A)
Bit Resolution
Converter
Line Outputs (XLR & 1/4'' Booth)
Max Output Level
DNR (a-weighted)
THD+N @ 1kHz
Frequency Response
Crosstalk @ 1kHz
Line Outputs (RCA)
Max Output Level
DNR (a-weighted)
THD+N @ 1kHz
Frequency Response
Crosstalk @ 1kHz
Headphones Outputs
Load Impedance
Max Output Level (32 Ω load)
DNR (a-weighted)
THD+N @ 1kHz
Technical Specification
24-bit
Cirrus Logic
+20 dBu
108 dB
0.001%
20 Hz – 20 kHz (±0.2 dB)
-115 dB
+14 dBu
108 dBu
0.001%
20 Hz – 20 kHz (±0.1 dB)
-117 dB
16 Ω – 600 Ω
+7.2 dBu
109 dB
0.07 %
TRAKTOR KONTROL S8 - Manual - 304
Technical Specification
Headphones Outputs
Frequency response ±1 dB
Crosstalk @ 1kHz
20 Hz – 20 kHz (±0.2 dB)
-63 dB
Power Supply
â–Ş Input: 100-240VAC, 50/60Hz, 1.5A
â–Ş Output: 15VDC, 2660mA
Dimensions and Weight
â–Ş Depth: 38.7 cm
â–Ş Height: 6.6 cm
â–Ş Width: 58.5 cm
â–Ş Weight: 5 kg
Environmental Specifications
â–Ş Operating temperature: +5 to +35 °C (41 to 95 °F), max 85% non-condensing humidity
â–Ş Storage temperature: 0 to 40 °C (32 to 104 °F), max 85% non-condensing humidity
Do not install this unit in locations exposed to high humidity or direct sunlight.
TRAKTOR KONTROL S8 - Manual - 305
Advertisement
Key features
- Integrated Mixer
- Touch-sensitive Pads
- RGB-backlit Buttons
- Remix Decks
- Stem Decks
- Performance Modes
- Audio Interface
- Dedicated FX Units
- Touch Strip
- Loop Control
