User manual | Sound Systems - Proel International Ltd.

MIXERS
MI SERIES
M SERIES
MLX SERIES
STAGE GEAR
DB SERIES
100 SERIES
PROCESSORS
PC SERIES
POWER AMPLIFIERS
DPX SERIES
HPX SERIES
HPD SERIES
LOUDSPEAKERS
WAVE SERIES
V SERIES
VHDA SERIES
FLASH SERIES
LITE SERIES
SW SERIES
WD SERIES
XEOS SERIES
XENIA SERIES
STUDIO MONITORS
EIKON SERIES
PORTABLE SOUND SYSTEMS
FREEPASS
FREEPACK
FREE
INDEX
6
13
18
24
26
32
34
36
38
42
44
48
50
54
60
64
66
68
72
78
82
85
the only tru
uth is music
(Jack Kerouac)
Mi SERIES
The Mi Series has been created by PROEL in order to offer very compact mixers with a high input density and a superior audio quality at a very
affordable price. The series includes 5 models with 5, 6, 10, 12 and 16 channels, featuring in a very compact package a high number of inputs and a
full set of intelligent functions, able to satisfy most of the sound reinforcement applications. Designed and engineered in Italy by PROEL R&D, Mi
mixers are hosted in an ultra-rugged stylish metal case, providing extended durability for a stage-proof use.
The smallest models of the series, Mi5 and Mi6, offer in an ultra-compact format the performance of large professional consoles, delivering a clean and
accurate sound and full mixing capability. The new Mi5, despite its small size, includes a high-quality DSP able to provide musicians and performers
with studio-grade effects.
With respectively 10 and 12 inputs, Mi10 and Mi12 feature one of the finest digital effects of its class, the PROEL 24bit PROFEX DSP, providing 256
studio-grade presets (including mono and stereo TAP DELAY and TAP DELAY + REVERB) with a convenient LCD display for the effect selection.
The new Mi16 features 8 MIC/LINE plus 4 STEREO LINE channels that, together with 2 monitor sends and the 24bit PROFEX DSP, allows this compact
console to be used for mixing a full live band with a clean and accurate sound.
6
Mixers Mi SERIES
Mi5
NEW
• Ultra-compact 5-channel 2-bus mixer
• 1 MIC/LINE input channel with 2-band EQ and PHANTOM power
• Low-noise, very high-headroom microphone preamplifier
• 2 STEREO inputs with balance control
• Stereo HEADPHONES / C. ROOM output
• 2-TRACK input and output
• 24bit DSP with 16 presets
• Electronically balanced MAIN MIX outputs
• Two 4-LED VU-METERS
• Applications: home recording and rehearsal, ultra-small personal mixer
for musicians
Mixers Mi SERIES
High-quality 24bit DSP with
16 single and combined
studio-grade effects
Mi6
• Ultra-compact 6-channel 2-bus mixer
• 2 MIC/LINE input channels with high-headroom, low-noise MIC
preamps, 2-band EQ and PHANTOM power
• 2 STEREO inputs with balance control
• Stereo HEADPHONES / C. ROOM output
• 2-TRACK output
• Electronically balanced MAIN MIX outputs
High-headroom,
low-noise MIC
preamps
• Two 4-LED VU-METERS
• Applications: home recording and rehearsal, ultra-small PA systems
for schools, gyms and meeting rooms, personal mixer for musicians
8
Mixers Mi SERIES
Mi10
• Compact 10-channel 2-bus mixer
• 2 MIC/LINE inputs with high-headroom, low-noise MIC preamps,
3-band EQ, LO-CUT and PHANTOM power
• 4 STEREO LINE inputs with balance control and effect send
• 1 AUX send
• 2-TRACK, HEADPHONES and CONTROL ROOM outputs
• 24bit studio-grade PROFEX DSP with 256 effects, TAP delay and LCD
display
• Electronically balanced MAIN MIX outputs
• Two 4-LED VU-METERS
• Applications: small live bands (2 to 4 people), home and multimedia
applications, rehearsal rooms, small fixed installations
Mixers Mi SERIES
3-band EQ with
musical filtering
frequencies and
LO-CUT
Mi12
• Compact 12-channel 2-bus mixer
• 4 MIC/LINE inputs with high-headroom, low-noise MIC preamps,
3-band EQ, LO-CUT and PHANTOM power
• 4 STEREO LINE inputs with balance control, monitor and effect send
• 2 AUX sends
• 2-TRACK, HEADPHONES and CONTROL ROOM outputs
• 24bit studio-grade PROFEX DSP with 256 effects, TAP delay and LCD
display
• Electronically balanced MAIN MIX outputs with 45mm fader
24bit studio-grade
PROFEX DSP with
256 effects, TAP
delay and LCD
display
• Two 4-LED VU-METERS
• Applications: small live bands (3 to 5 people), home and multimedia
applications, rehearsal rooms, small fixed installations
10
Mixers Mi SERIES
Mi16
NEW
• Compact 16-channel 2-bus mixer
• 8 MIC/LINE inputs with 3-band EQ, LO-CUT and PHANTOM power
• Low-noise, high-headroom microphone preamplifiers
• 4 STEREO LINE inputs with 2-band EQ
• 3 AUX sends
• 2-TRACK, HEADPHONES and CONTROL ROOM outputs
• PFL function on all channels
• 24bit PROFEX DSP with 256 presets, TAP delay and 2-digit display
• Electronically balanced MAIN MIX outputs with 1/4” JACK and XLR-M
connectors
• Two 8-LED VU-METERS
• Applications: full live bands, home and multimedia applications,
rehearsal rooms, fixed installations
Mixers Mi SERIES
Mi5
Mi6
Mi10
Mi12
Mi16
Connectors
sensitivity
impedance
sensitivity
impedance
from -10 to -50 dB
2 Kohm
from +20 to -20 dB
10 Kohm
from -10 to -50 dB
2 Kohm
from +20 to -20 dB
10 Kohm
±15 dB @ 12KHz
±15 dB @ 80Hz
±15 dB @ 12KHz
±15 dB @ 2.5KHz
±15 dB @ 80Hz
from -10 to -50 dB
2 Kohm
from +20 to -40 dB
10 Kohm
75Hz, 18dB/oct.
±15 dB @ 12 KHz
±15 dB @ 2.5 KHz
±15 dB @ 80 Hz
from -10 to -50 dB
2 Kohm
from +20 to -20 dB
10 Kohm
75Hz, 18dB/oct.
±15 dB @ 12KHz
±15 dB @ 2.5KHz
±15 dB @ 80Hz
Balanced XLR-F
HIGH (shelving)
MID (peaking)
LOW (shelving)
from -10 to -50 dB
2 Kohm
from +20 to -40 dB
10 Kohm
75Hz, 18dB/oct.
±15 dB @ 12 KHz
±15 dB @ 2.5 KHz
±15 dB @ 80 Hz
sensitivity
impedance
HIGH (shelving)
LOW (shelving)
-10 dB
10 Kohm
-10 dB
10 Kohm
+4 / -10 dB
10 Kohm
+4 / -10 dB
10 Kohm
from +20 to -20 dB
10 Kohm
±15 dB @ 12KHz
±15 dB @ 80Hz
Balanced JACK
MAIN MIX
nom. out level
+4 dBu
+4 dBu
+4 dBu
+4 dBu
+4 dBu
C. ROOM output
nom. out level
nom. out level
nom. out level
nom. in level
min. impedance
max. out level
0 dBu
0 dBu
32 ohm
(2x) 193 mW
0 dBu
0 dBu
0 dBu
0 dBu
32 ohm
(2x) 193 mW
0 dBu
0 dBu
0 dBu
0 dBu
32 ohm
(2x) 193 mW
0 dBu
0 dBu
0 dBu
0 dBu
32 ohm
(2x) 193 mW
Balanced JACK (Mi16)
Balanced XLR-M
Unbalanced JACK
Unbalanced JACK
Unbalanced RCA
Unbalanced RCA
MONO INPUT CHANNEL
Mic Input
Line Input
Lo cut
EQ
Balanced JACK
STEREO INPUT CHANNEL
Line Input
EQ
MASTER SECTION
AUX output
2TRK
HEADPHONES
0 dBu
0 dBu
32 ohm
(2x) 193 mW
Stereo JACK
PROFEX DIGITAL EFFECT PROCESSOR (not available for Mi6)
Effects
16 presets: HALL, ROOM,
VOCAL and PLATE reverbs; 256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs; STEREO and MONO TAP DELAY; REV + DELAY,
STEREO and MONO DELAY; REV + TAP DELAY, REV + CHORUS
REV + DELAY, REV +
CHORUS
A/D and D/A
converters
24 bit
24 bit
24 bit
16-position rotary switch,
PEAK LED, MUTE switch
24 bit
DSP resolution
Controls
2-DIGIT display, DIAL, PEAK LED, MUTE and TAP DELAY switch
GENERAL SPECIFICATIONS
Maximum level
all outputs
+22 dBu
Crosstalk
meas. at 1 KHz
> 82 dBu
HUM & Noise
unweighted
at +4dB, 1kHz
< -93 dBu
< 0,008 %
THD + Noise
Dimensions
(WxHxD)
173x222x60 mm
173x222x60 mm
200x266x60 mm
254x302x60 mm
420 x 368 x 87 mm
Weight
1.00 kg
1.00 kg
1.50 kg
2.00kg
3.80 kg
POWER REQUIREMENTS
Supply
18 VAC 500 mA (use only supplied AC/AC ADAPTER)
110-120 VAC (±10%) 50 / 60
Hz (US plug)
230-240 VAC (±10%) 50 / 60
Hz (EU plug)
240 VAC (±10%) 50 / 60 Hz
(UK plug)
Mains Supply
Voltage:
Consumption
17 W
17 W
32 W
32 W
20 W
12
Mixers Mi SERIES
M SERIES
After providing for many years thousands of satisfied users with the best mixing tools, the latest generation of M Series compact mixers is still offering
a superior audio quality, a full set of features and the highest number of MIC inputs in the category, together with ‘intelligent’ functions such as
USB routing and channel COMPRESSORS.
All the models feature the PROEL 24bit PROFEX DSP, one of the finest digital effect of its class, providing 256 studio-grade algorithms (including mono
and stereo TAP DELAY and TAP DELAY + REVERB) and a convenient LCD display.
Designed and engineered in Italy by PROEL R&D, M mixers are hosted in an ultra-rugged stylish metal case with ABS sides, providing extended
durability for a stage-proof use. As a unique feature in the category, all the models include as standard both a padded carrying bag and metal brackets
for 19” rack mounting.
The ultra-portable M602FX with 2 mono and 2 stereo channels provides the most demanding performers with all the functions necessary to mix a
limited number of signals with utmost accuracy.
The 8-in, 6-mic M822USB includes a versatile USB routing section, for a complete control of the signals to and from the PC and a built-in universal
power supply.
M1622USB, offering 16 inputs and 12 microphone channels, now features 4 AUX sends, the USB routing and also one-knob intelligent COMPRESSORS
on the MONO channels.
Mixers M SERIES
M602FX
• Compact 6-channel 2-bus mixer
• 2 MIC/LINE inputs and 2 MIC/LINE STEREO inputs with 4 high-
performance, low-noise MIC preamps
• 3-band EQ
• 1 AUX send
• 24bit studio-grade PROFEX DSP with 256 effects, footswitch
controllable TAP delay and LCD display
• 2-TRACK IN & OUT with level control
• PHONES and C.ROOM outputs
• Balanced MAIN MIX output with 45mm fader
• Two 8-LED VU-METERS
• Padded carrying bag and 19” rack adapters included
• Applications: small live bands (2 to 4 people), home and multimedia
applications, small fixed installations, rehearsal rooms
Padded carrying
bag included, for the
maximum protection and
the easiest transport
14
Mixers M SERIES
M822USB
• Compact 8-channel 4-bus mixer
• 4 MIC/LINE inputs and 2 MIC/LINE STEREO inputs with 6 high-
performance, low-noise MIC preamps and
• 3-band EQ and LO-CUT filter (MONO channels)
• 2 AUX sends (MON + FX)
• 24bit studio-grade PROFEX DSP with 256 effects, footswitch
controllable TAP delay and LCD display
• 2-TRK IN & OUT with dedicated level control
• ALT 3-4 additional bus
• PHONES and C.ROOM (with fader) outputs
• USB interface with ROUTING
• 45mm faders
• Balanced MAIN MIX output with XLR connectors on top panel
• Two 8-LED VU-METERS
• Padded carrying bag and 19” rack adapters included
• Built-in switching power supply
• Applications: small live bands (4 to 6 people), home and multimedia
applications, small fixed installations, rehearsal rooms
Mixers M SERIES
USB interface with full IN & OUT
ROUTING capability
M1622USB
• Compact 16-channel 4-bus mixer
• 8 MIC/LINE inputs and 4 MIC/LINE STEREO inputs with 12
high-performance, low-noise MIC preamps
• Balanced MAIN MIX output with XLR connectors on top panel
and INSERT point
• 7-band GRAPHIC EQ assignable to MIX L&R or to AUX 1&2
• 3-band EQ, LO-CUT filter and INSERT point on all MONO channels
• USB interface with ROUTING
• “One-knob” COMPRESSORS for an accurate and easy-to-use
• STANDBY function
dynamic processing of vocals and instruments
• Two 8-LED VU-METERS
• 4-band EQ on STEREO channels
• Padded carrying bag and 19” rack adapters included
• 4 AUX sends and 2 GROUPS
• BNC connector for 12VDC lamp
• 24bit studio-grade PROFEX DSP with 256 effects, footswitch
• Built-in switching power supply
controllable TAP delay and LCD display
• 2-TRK IN & OUT with dedicated level control
• Applications: full live bands, large multimedia applications,
fixed installations in large conference room, clubs and theaters
• PHONES and C.ROOM outputs
• 60mm faders
16
Mixers M SERIES
OPTIONAL
ACCESSORIES
SDC670PRO
GF29
Optional LED lamp
Optional
with BNC connector
footswitch
M602FX
M822USB
M1622USB
Connectors
sensitivity
from -10 to -50 dB
from 0 to -60 dB
from 0 to -60 dB
Balanced XLR-F
impedance
2 Kohm
2 Kohm
2 Kohm
sensitivity
from +20 to -20 dB
from +20 to -40 dB
from +20 to -40 dB
impedance
10 Kohm
10 Kohm
10 Kohm
75Hz, 18dB/oct.
75Hz, 18dB/oct.
HIGH (shelving)
±15 dB @ 12KHz
±15 dB @ 12 KHz
±15 dB @ 12 KHz
MID (peaking)
±15 dB @ 2.5KHz
±15 dB @ 2.5 KHz
±15 dB from 100 Hz to 8 kHz
LOW (shelving)
±15 dB @ 80Hz
±15 dB @ 80 Hz
±15 dB @ 80 Hz
MONO INPUT CHANNEL
Mic Input
Line Input
Lo cut
EQ
Compressor
Balanced JACK
CH 1-8, 1 control
STEREO INPUT CHANNEL
Mic Input
Line Input
EQ
sensitivity
from -0 to -40dB
from -0 to -40dB
from -0 to -40dB
impedance
2 Kohm
2 Kohm
2 Kohm
sensitivity
from +20 to -20 dB
from +20 to -20 dB
from +20 to -20 dB
impedance
10 Kohm
10 Kohm
10 Kohm
HIGH (shelving)
±15 dB @ 12KHz
±15 dB @ 12 KHz
±15 dB @ 12 KHz
MID (peaking)
±15 dB @ 2.5KHz
±15 dB @ 2.5 KHz
HI-MID (peaking)
Balanced XLR-F
Balanced JACK
±15 dB @ 3 KHz
LO-MID (peaking)
±15 dB @ 500 Hz
LOW (shelving)
±15 dB @ 80Hz
±15 dB @ 80 Hz
±15 dB @ 80 Hz
MAIN MIX
nom. out level
+4 dBu
+4 dBu
+4 dBu
Balanced JACK (M602FX)
Balanced XLR-M
MAIN MIX insert
nom. out level
0 dBu
TRS JACK
MASTER SECTION
Graphic EQ
7-band
C. ROOM output
nom. out level
ALT 3 - 4 output
nom. out level
GROUP output
nom. out level
AUX output
nom. out level
0 dBu
2TRK
nom. out level
0 dBu
nom. in level
HEADPHONES
0 dBu
0 dBu
0 dBu
0 dBu
0 dBu
Unbalanced JACK
+4 dBu
Balanced JACK
0 dBu
0 dBu
Unbalanced JACK
0 dBu
0 dBu
Unbalanced RCA
0 dBu
0 dBu
0 dBu
Unbalanced RCA
min. impedance
32 ohm
32 ohm
32 ohm
max. out level
(2x) 193 mW
(2x) 193 mW
(2x) 193 mW
Stereo JACK
Stereo IN/OUT
16-bit converter,
48 KHz sample rate
Stereo IN/OUT
16-bit converter,
48 KHz sample rate
Type B
USB
PROFEX DIGITAL EFFECT PROCESSOR
Effects
256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs; STEREO and MONO TAP DELAY; REV + DELAY, REV + TAP DELAY, REV + CHORUS
A/D and D/A
converters
24 bit
DSP resolution
24 bit
Controls
2-DIGIT display, DIAL, PEAK LED, MUTE and TAP DELAY switch, MUTE and TAP DELAY footswitch
GENERAL SPECIFICATIONS
Maximum level
all outputs
+22 dBu
Crosstalk
meas. at 1 KHz
> 82 dBu
HUM & Noise
unweighted
< -93 dBu
THD + Noise
at +4dB, 1kHz
< 0,008 %
Dimensions
(WxHxD)
240 x 85 x 272 mm
315 x 91 x 363 mm
465 x 91 x 462 mm
Weight
1,80 kg
3,40 kg
6,50 kg
POWER REQUIREMENTS
Supply
Internal power supply
110-240 VAC (±10%) 50 / 60 Hz available with
Europe mains cord (Shucko plug)
US mains cord (NEMA 5-15P plug)
UK mains cord (BS1363 plug)
Mains Supply
Voltage:
Consumption
Mixers M SERIES
32 W
45 W
75 W
Unbalanced JACK
MLX SERIES
MLX2842 and MLX3642 are large format mixers combining a large number of channels with a full set of features designed to fit any
professional sound reinforcement application.
The 20 or 28 MONO input channels feature ultra-low noise, high-headroom preamps, able to capture the full range of any instrument.
The 4-band EQ with two sweep mids has a great response for tweaking your sound in the most musical way, while the EQ ON/OFF switch
allows instant comparison. Each model includes two STEREO channels with 4-band EQ.
The 6 AUX sends can be set pre- or post-fader in pairs. AUX sends 1 to 4, with 60mm faders and 3-band EQ, provide effective control of
the stage monitoring. AUX sends 5&6 can be routed to the two internal effects, to external outboard or used as two additional monitor
sends. Two STEREO RETURNS with full routing allow to connect external outboard or two additional stereo instruments.
All the channels together with the four GROUPS and the MAIN MIX feature 100mm long-wearing high-quality faders for the most accurate
level control.
The MLX mixers include two 24-bit PROFEX digital effects able to provide 256 studio-grade gig-ready effect algorithms: this allows to
enhance your mix with natural high-resolution reverb or delay effects without the need of external outboard. The effects can be selected
thru a convenient LCD display and they can be freely routed to the monitor sends, the groups and the main mix.
The MLX series features a built-in USB interface to get CD quality audio to and from your computer: thru the USB interface you can play
audio files from the PC or record your live performance directly on hard-disk. The MLX USB interface offers the possibility to route the
INPUT signal directly to the MAIN MIX or to STEREO channel 2 and to get the OUTPUT signal from the MAIN MIX or from GROUPS 1&2.
The MLX MASTER section offers plenty of services and useful features, such as a MAIN MUTE switch, a TALKBACK section and separate
PHONES and MONITOR level controls. Two or three USB sockets are available for connecting 5V USB LAMPS.
The intuitive control surface layout and the color-coded ergonomic knobs of MLX mixers allow to locate easily each function and
makes them extremely easy to use. Both models are hosted in a rugged and road-proof metal chassis.
18
Mixers MLX SERIES
MLX2842
MLX3642
MLX2842
MLX3642
MLX2842 / MLX3642
• Premium 28 or 36-Input 4-Bus Live Mixers with built-in PROFEX
effects and USB interface
NEW
• Solo-In-Place with PFL/AFL function plus full-featured Talkback
section
• 20 or 28 state-of-the-art low-noise Mic Preamps
• Main Mute function
• Mono channels with 4-band EQs with 2 sweep mid, Lo-Cut, Insert
• 2 independent 24-bit PROFEX digital effects with 256 studio-grade
and Direct Out
presets including reverbs, delays, chorus and combination effects
• 4 stereo Line inputs with 4-band EQs
• USB audio IN/OUT interface with comprehensive routing options
• 6 Aux sends per channel pre/post fader switchable
• Long-wearing 100 mm logarithmic-taper faders
• Peak and Signal LEDs plus Mute, Solo, Subgroup and Main routing
• High-resolution 2 x 16-LED bar meters
switches on all channels
• Aux 1 to 4 with 3-band EQ, 60mm faders and Insert for advanced
stage monitoring
• Balanced Main Mix, Main B and AUX 1-4 outputs with XLR
connectors
• USB connectors for the use of 5V lamps
• 4 Subgroup outputs with Inserts
• Internal universal power supply (100 – 240 V~)
• 2 independent Main outputs with Inserts on Main Mix
• High-quality components and rugged construction for the
• 2 Stereo Returns with comprehensive routing options
• 2 Headphones and 1 Monitor outputs with independent level
control
Mixers MLX SERIES
maximum durability
• Designed and Engineered by PROEL Italy
MONO CHANNEL
STEREO CHANNEL
MASTER SECTION
20
Mixers MLX SERIES
CMMLX2842
OPTIONAL
ACCESSORIES
Flight Case for MLX2848
CMMLX3642
USBLL02
Flight Case for MLX3642
Section
USB LED lamp
Data
Connectors
sensitivity
from 0 to -50 dB
Balanced XLR-F
impedance
2 Kohm
max input level
+22 dBu
sensitivity
from +15 to -35 dB
impedance
10 Kohm
MONO INPUT CHANNEL
Mic Input
Line Input
Balanced JACK
max input level
+22 dBu
Insert
send & return level/max
-10 dBu / +22 dBu
TRS JACK
Direct Out
max output level
+22 dBu
Balanced JACK
Lo cut
EQ
75Hz, 18dB/oct.
HIGH (shelving)
±15 dB @ 12KHz
HI-MID (peaking)
±15 dB from 500Hz to 12KHz
LO-MID (peaking)
±15 dB from 80Hz to 2KHz
LOW (shelving)
±15 dB @ 80Hz
sensitivity
from +15 to -35 dB
impedance
10 Kohm
max input level
+22 dBu
HIGH (shelving)
±15 dB @ 12KHz
HI-MID (peaking)
±15 dB @ 3KHz
LO-MID (peaking)
±15 dB @ 500Hz
LOW (shelving)
±15 dB @ 80Hz
STEREO INPUT CHANNEL
Line Input
EQ
Balanced JACK
MASTER SECTION
MAIN MIX
max. out level
+28 dBu
Balanced XLR-M
MAIN MIX insert
send & return level/max
-10 dBu / +22 dBu
TRS JACK
AUX output
max out level
+22 dBu
Balanced XLR-M, Balanced JACK
AUX 1-4 EQ
HIGH (shelving)
±15 dB @ 12KHz
MID (peaking)
±15 dB from 100Hz to 8KHz
LOW (shelving)
±15 dB @ 80Hz
GROUP output
max out level
+22 dBu
Balanced JACK
MONITOR output
nom. out level
+22 dBu
Unbalanced JACK
2TRK
max out level
+15 dBu
Unbalanced RCA
max in level
+22 dBu
Unbalanced RCA
max. out level
+22 dBu / 600 ohm
Stereo JACK
Stereo IN/OUT, 16-bit converter, 48 KHz sample rate
Type B
HEADPHONES
USB
PROFEX DIGITAL EFFECT PROCESSOR
Effects
256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs; STEREO and MONO TAP DELAY; REV + DELAY, REV + TAP DELAY, REV + CHORUS
A/D and D/A converters - DSP
resolution
24 bit
Controls
2-DIGIT LCD, DIAL, TAP DELAY switch
GENERAL SPECIFICATIONS
Impedance
all line outputs
120 ohm unbalanced
Crosstalk (meas. at 1 KHz)
channel to channel
> -80dBu
mix to mix
> -80dBu
channel to mix
> -80dBu
all channels routed, faders down
< -90 dBu
all channels routed at 0 dB
< -86 dBu
mic to insert
< 0,009 % (+30 dB unity gain, +20 dBu output)
mix to mix
< 0,03 % (+30 dB unity gain, +20 dBu output)
Noise
THD
Dimensions (WxHxD)
MLX2842: ?? x ?? x ?? mm - MLX3642: ?? x ?? x ?? mm
Weight
MLX2842: ??kg - MLX3642: ??kg
POWER REQUIREMENTS
Power Supply
100-240VAC, 50/60Hz
Consumption
100 W
Mixers MLX SERIES
Where wo
mus
ords fail,
sic speaks.
DB SERIES
D.I. Boxes (Direct Injection Boxes) are part of the essential set of tools required for any professional live sound situation or any application where
the audio devices feature different levels, impedance and connections. Transforming audio signals from unbalanced to balanced, D.I. Boxes reduce the
possibility of electrical disturbances on the line - especially over long cable runs such as from a musical instrument to the FoH mixing console.
The DB series includes three different models of high-performance D.I. boxes: a single channel active (DB1A), a single channel passive (DB1P) and
a dual channel active (DB2A). The circuitry of each model has been designed with the maximum care, using carefully selected electronic components,
such as isolation transformers (DB1A, DB1P) and low-distortion ICs. This guarantees a clean, hum-free signal transmission from the instrument to
the mixing consoles, even on very long cables, without impedance matching problems. On the front panels, a wide choice of connectors is available
(XLR, JACK and RCA, depending on the model), allowing easy connection from a wide range of sources, including keyboards and samplers, guitars and
basses, PC audio cards and any type of music player.
The ACTIVE versions can be powered by 48 V phantom power from the mixing console, by a 9 V battery or, in
large applications using many DI BOXES, by an external 9 V power adapter that can be daisy-chained using the
double power connector on the rear panel.
The innovative mechanical design of the three models includes an aluminum shell and rubber corners, which
provide maximum protection in the toughest situations. When the two rubber corners are removed, two guides
are exposed, allowing the coupling of two DI units, which can then be mounted in a 19” standard rack (rack
ears included). This unique feature is extremely convenient for engineers who need to use a large number of DI
BOXES in the same application.
24
Stage Gear DB SERIES
DB1A
DB2A
DB1P
• Single channel active D.I. Box
• Dual channel active D.I. Box
• Single channel passive D.I. Box
• MU-METAL core isolation transformer for
• STEREO configuration: one unit can be
• MU-METAL core isolation transformer for
full isolation between the musician’s gear
and the sound reinforcement system
• Low-noise ICs for balancing the signal,
able to guarantee audio integrity and to
handle very low-impedance loads.
• High dynamic headroom with minimum
phase and harmonic distortion
• Input JACK and XLR connectors with link
possibility (all the connections on the
same side)
• -10 dB, -20 dB, -30 dB PAD
• CLIP and SIGNAL LED
• Phase reverse switch
• Powering options: 9V battery, +48V,
external AC/DC adaptor supply
• 19” rack mountable (ears included)
• Designed to be used by professional
System Type
INPUT SECTION
Input Impedance
Max Input Level
Connectors
OUTPUT SECTION
Output
Max. Output Level
Connector
System Performance
Insertion loss
CMR
Phase distortion
Distortion THD 20÷20k
Hz 0dBu
Noise
Frequency Response
Controls
Indicators
GENERAL
Phantom Power
External AC/DC adaptor
Standalone/Standby
Current consumption
Dimensions (W x H x D)
Weight (excluding
batteries)
used for a stereo device
• High dynamic headroom with minimum
phase and harmonic distortion
• High input impedance reduces loading
• Very good electronic performance thanks
to SMD components and low noise IC
• Very efficient ground lift circuitry
• Input JACK, RCA and XLR connectors
with link possibility (all the connections
on the same side)
• -20 dB, -30 dB PAD
• Powering options: 9V battery, +48V,
external AC/DC adaptor supply
• 19” rack mountable (ears included)
• Particularly suited for use with stereo
full isolation between the musician’s gear
and the sound reinforcement system
• Specially-designed MAKE-UP filter at 4
kHz is for cutting any hiss or buzz noise
coming from acoustic or electric guitars
and basses
• High dynamic headroom with minimum
phase and harmonic distortion
• Input JACK and XLR connectors with link
possibility (all the connections on the
same side)
• -20 dB, -40 dB, -60 dB PAD
• 19” rack mountable (ears included)
• Designed for applications where it is not
possible or practical to power the unit
keyboards, DJ equipment and PC-based
audio systems
DB1A
1-channel active DI BOX
DB2A
2-channel active DI BOX
DB1P
1-channel passive DI BOX
1M Ohm (pad at 0 dB)
47k Ohm (pad at -20 dB)
44k Ohm (pad at -30 dB)
+5 dBu (pad at 0 dB)
+25 dBu (pad at -20 dB)
+35 dBu (pad at -30 dB)
200K Ohm (pad at 0 dB)
47k Ohm (pad at -20 dB)
47k Ohm (pad at -30 dB)
+5 dBu (pad at 0 dB)
+25 dBu (pad at -20 dB)
+35 dBu (pad at -30 dB)
Two Parallel 1/4” jack connectors and a parallel RCA connector
(unbalanced)
Jack: Tip Hot / Sleeve Ground
120K Ohm (pad at 0 dB)
47k Ohm (pad at -20 dB)
47k Ohm (pad at -40 dB)
+15 dBu (pad at 0 dB)
+35 dBu (pad at -20 dB)
+55 dBu (pad at -40 dB)
Two Parallel 1/4” jack connectors and a parallel RCA connector
(unbalanced)
Jack: Tip Hot / Sleeve Ground
Transformer Balanced (fully isolated)
into 600 Ohms or greater
+3 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Active discrete devices (transformer less)
into 600 Ohms or greater
+5 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Transformer Balanced (isolated with shielding)
into 1K Ohms or greater
-5 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
< 1 dB
> 60 dB
+11° at 20 Hz, -6° at 20k Hz
< 1 dB
> 50 dB
+20° at 20 Hz, -30° at 20k Hz
20 dB
> 100 dB
0° at 20 Hz, 0° at 20k Hz
< 0.007 %
< 0.007 %
< 0.007 %
< -105 dBu unweighted
10 Hz to 100 kHz, +0dB/-1 dB
On/off, Pad -10, Pad -20, Gnd Lift, Ø inv
On, signal, clip
< -105 dBu unweighted
10 Hz to 40 kHz, +0dB/-1 dB
On/off, Pad -20, Pad -30, Gnd Lift
On
< -105 dBu unweighted
10 Hz to 100 kHz, +0dB/-1 dB
Pad -20, Pad -40, Gnd Lift, Filter (12” emulator)
-
+24 volts DC to +48 volts DC
+9 volts DC
9 volt PP3 type, battery preferably alkaline
less than 8 mA
215 x 50 x 125 mm
+24 volts DC to +48 volts DC
+9 volts DC
9 volt PP3 type, battery preferably alkaline
less than 8 mA
215 x 50 x 125 mm
215 x 50 x 125 mm
1.08 kg (2.38 lb)
1.06 kg (2.34 lb)
1.04 kg (2.29 lb)
Two Parallel 1/4” jack connectors and a parallel XLR connector (unbalanced)
Jack: Tip Hot / Sleeve Ground XLR female: Pin 2 Hot / Pin1 & 3 Ground
Stage Gear DB SERIES
100 SERIES
The 100 Series is a range of accessories and useful tools, ranging from D.I. Boxes and Headphone Amps to Signal Splitters, Tube Preamps and Power
Supply Units, designed to complement audio systems in stage applications, recording studios and fixed installations.
Hosted in a stylish extruded and stackable aluminum shell or in a sturdy metal chassis, the 100 Series products are meant to deliver sound quality,
versatility and stage-proof reliability in a very affordable package.
26
Stage Gear 100 SERIES
DIRECT100A
• Active Direct Injection Box
• High quality isolation transformer for ultra-flat frequency response
• Low-noise OP amps with high-quality sound performance
• XLR-F and ¼” JACK input connectors + ¼” JACK link
• XLR-M balanced output
• 20dB PAD and GND lift switch
• Stackable aluminum shell
DIRECT100P
• Passive Direct Injection Box
• High quality isolation transformer for ultra-flat frequency response
• High quality electronic components
• ¼” JACK input and link connectors
• XLR-M balanced output
• 20dB & 40dB PAD and GND lift switch
• Stackable aluminum shell
Stage Gear 100 SERIES
PHANTOM100
• Phantom Power Supply
• Provides clean and hum-free +48V power supply for all condenser
microphones
• Suitable for all applications where +48V power supply is not available
from mixing console (direct recording to PC, use of devices with no
phantom power, fixed installations, etc.)
• Powered by DC adaptor (included)
• Stackable aluminum shell
SPLIT100
• Signal Splitter
• Splits a microphone or line input signal into two outputs equal to
the original
• High-quality isolation transformer for a complete separation
between the two output signals
• GND LIFT switch for each output
• XLR-F input + XLR-M link connectors, 2 x XLR-M output connectors
• Stackable aluminum shell
28
Stage Gear 100 SERIES
HPAMP104
• 4-CH Headphone Amplifier
• Very compact and portable package
• ¼” JACK + RCA stereo/mono input
• 4 x ¼” JACK stereo headphone outputs with individual level controls
• 2 x 45mW @ 100 ohm max output level
• 16 ohm minimum output impedance (per channel)
• Powered by DC adaptor (included)
• Stackable aluminum shell
HPAMP106
• 6-ch Headphone Amplifier
• 2 x 193mW max output level at 32 ohm (per channel)
• 6 independent high-power amplifier sections suitable for virtually
• 16 ohm minimum output impedance (per channel)
any type of headphones
• 4 selectable main stereo/mono inputs with ¼” JACK connectors
(REAR panel)
• 6 stereo headphone outputs with individual level controls , input
selector and ¼” JACK connectors (FRONT panel)
• Built-in power supply with shielded transformer and voltage selector.
Stage Gear 100 SERIES
• 19” rack mountable metal chassis
TUBE1000USB
• TUBE microphone preamp with USB
• Input and output GAIN controls plus SATURATION function
• 12AX7 tube preamp section for adding warmth to microphones and
• Accurate dual LEVEL METER
instruments
• Built-in low-noise +48V phantom power
• PHASE reverse switch, adjustable LO-CUT filter, VOCAL EQ, built-in
LIMITER circuit
• Microphone (XLR-F) and instrument (¼” JACK) inputs
• XLR-M and ¼” JACK balanced outputs
• USB 1.1 compliant, compatible with Windows XP/Vista/7 and Mac OS
9.1 and newer
PSU110
• 10-Out Power Supply
• Total output power 2000mA
• Universal high-performance power supply for pedal effects
• Complete isolation and short-circuit protection for each output
• 8 x 9VDC outputs, 1 x 12VDC output, 1 x 12VAC output
• Superior quality power transformer for hum-free operation
• Output 7 and 8 with fine power adjustment
• Full cable set included
• Dip switches for individual adjustment of the 9VDC outputs
30
Stage Gear 100 SERIES
System Type
DIRECT100A
DIRECT100P
1 channel active DI
1 channel passive DI
TUBE100USB
System Type
INPUT SECTION
Tube Mic Preamp with USB
MICROPHONE INPUT
Input Impedance
>250 Kohm
>250 Kohm
Impedance
2.5 Kohm
Max Input Level
+6 (PAD at 0) / +26 (PAD at 20) dBu
+10 (PAD at 0) / +30 (PAD at 20) / +50 (PAD
at 40) dBu
Sensitivity
from 0 to -60 dBu
Connectors
1 x XLR-F + 1 x 1/4" jack unbalanced
1 x 1/4" jack unbalanced
Connectors
XLR-F (balanced)
Link
1 x 1/4" jack unbalanced
1 x 1/4" jack unbalanced
INSTRUMENT INPUT
OUTPUT SECTION
Output
Transformer Balanced (fully isolated)
Transformer Balanced (isolated with shielding)
Insertion Loss
0 dB
26 dB
Load Impedance
600 Ohms or greater
600 Ohms or greater
Connector
XLR male
XLR male
Impedance
>1 Mohm
Sensitivity
from +10 to -50 dBu
Connector
1/4" jack (unbalanced)
INSERT
Impedance send
100 ohm
Impedance return
10 Kohm
Nominal out Level
0 dBu
< 0.007 %
Connectors
1/4" jack (unbalanced)
ANALOG OUTPUT
SYSTEM PERFORMANCE
Distortion THD 50÷20k
Hz 0dBu
< 0.005 %
Noise
< -105 dBu unweighted
-
Frequency Response
10 Hz to 40 kHz (-3 dB)
40 Hz to 20 kHz (-3 dB)
Impedance
60 ohm
Nominal out level
+4 dBu
Controls
ON/OFF, PAD -20, GND LIFT
PAD 0 / -20 / -40, GND LIFT
Maximum out level
+21 dBu
Indicators
Power ON
-
Connectors
XLR-M and 1/4" jack (balanced)
Phantom Power
+18 volts DC to +48 volts DC
-
Battery
9 volt PP3 type alkaline
-
GENERAL
Dimensions (W x H x D) 152 x 50 x 134 mm
134 x 50 x 105 mm
Weight (excluding
batteries)
0,55 Kg
0,70 Kg
System Type
USB OUTPUT
Type
USB 1.1 and 2.0 (type B)
Converter
16 bit
Sampling rate
48 KHz
SYSTEM PERFORMANCE
HPAMP104
HPAMP106
4-channel headphone amplifier
6-channel headphone amplifier
Noise
< 95 dB unweighted
Distortion (THD)
0.008 % (at 1 KHz +4 dBu)
Frequency response
20 Hz - 20 KHz (-0.5 dB)
GENERAL
INPUT SECTION
Controls
MIC/INSTR selector, INPUT GAIN, 48V, PHASE
REV, LOW CUT, LOW CUT FREQUENCY, VOCAL EQ,
SATURATION, LIMIT, ENHANCE, OUT LEVEL, REC
MUTE, ON/OFF switch
Inputs
1 stereo
4 stereo
Input Impedance
500 Kohm
47 Kohm
Indicators
INPUT VU-METER, 48V, VU METER, USB, MUTE
Max Input Level
+15 dBu
+25 dBu
Supply
18 VAC 1000 mA (adapter included)
Connectors
1/4" jack stereo, 2 x RCA
2 x 1/4" jack unbalanced (each input)
Mains Supply Voltage 100-120 VAC or 220-240 VAC, 50-60 Hz
Outputs
4 stereo
6 stereo
Maximum output
(2x) 45mW @ 100 ohm (each)
(2x) 193 mW @ 32 ohm (each)
Load Impedance
minimum 16 ohm per channel
minimum 16 ohm per channel
Max gain
+20 dB each channel
+13 dB each channel
Connector
1/4" jack stereo (each output)
1/4" jack stereo (each output)
OUTPUT SECTION
Consumption
32 W
Dimensions (W x
H x D)
200 x 56 x 140 mm
Weight
1,8 Kg
SYSTEM PERFORMANCE
Distortion (THD)
0.02 %
0.02 %
Noise
< -98 dBu unweighted
< -98 dBu unweighted
Frequency Response
20 Hz - 20 KHz (-3 dB)
20 Hz - 20 KHz (-3 dB)
Controls
OUTPUT LEVEL, INPUT STEREO/MONO
OUTPUT LEVEL, INPUT SELECTOR
Indicators
Power ON
Power ON
Power supply
12-18 VDC (adapter included)
Selectable 100-120 VAC, 220-240 VAC, 50-60 Hz
GENERAL
Dimensions (W x H x D) 152 x 50 x 72 mm
480 x 44 x 210 mm
Weight
3,9 Kg
0,8 Kg
PHANTOM100
SPLIT100
PSU110
System Type
48V Phantom Power Supply
System Type
Signal Splitter
System Type
10-Out Power Supply
Input Connector
1 x XLR-F
Input Connector
1 x XLR-F
Output 1-4
9V DC (adjustable to 12V DC by DIP switch)
Ouput Connector
1 x XLR-M
Link Connector
1 x XLR-M
Output 5-6
9V DC (adjustable to 15V DC by DIP switch)
Output Phantom
Power
48V DC +/-2V
Ouput Connectors 2 x XLR-M
Output 7-8
9V DC (adjustable from 4 to 9V DC by knob)
Frequency
Response
Max Input Level
+4 dBu (at 50Hz)
Output 9
12V DC
20 Hz - 20 KHz (-3 dB)
Distortion
0.002% (0 dBu, 1 KHz)
Output 10
12V AC
Controls
ON/OFF switch
20 Hz - 20 KHz (-3 dB)
Power ON
MAX total power
output
2000 mA
Indicators
Frequency
Response
Power supply
9V DC (adapter included)
Insertion loss
-2.5 dB into 600 ohm load
Power supply
Selectable 100-120 VAC, 220-240 VAC, 50-60 Hz
Dimensions (W x
H x D)
Controls
2 x GND LIFT
134 x 50 x 72 mm
169 x 68 x 107 mm
134 x 50 x 123 mm
Weight
0,7 Kg
Dimensions (W x
H x D)
Dimensions (W x
H x D)
Weight
1,6 Kg
Weight
0,6 Kg
Stage Gear 100 SERIES
PC SERIES
The PC260 digital loudspeaker controller is based on the PROEL CORE DSP platform and feature state-of-the-art signal processing, advanced functions
a very intuitive UI, with a direct access to all the editing functions, and remote control capability. The 40bit floating point resolution and the 24bit AD/
DA converters ensure a perfect signal integrity with a dynamic range in excess of 110dB, for a superior sonic performance.
The PC260 includes a full set of functions and has 2 inputs (with the choice of AES digital input) and 6 outputs. Each INPUT features 5 bands of full
PARAMETRIC EQ (including parametric, shelving, notch, res. HP and LP, allpass and bandpass), 28 bands of GRAPHIC EQ and 3 bands of an extremely
versatile and powerful DYNAMIC EQ, together with a fully programmable COMPRESSOR/LIMITER and up to 600ms of delay. The OUTPUTS include any
kind of crossover filters with slope up to 48dB per octave, together with 5 bands of PEQ, fully programmable COMPRESSOR/ LIMITER and up to 600ms of
delay. Additional features include a 1/3 oct. RTA with dedicated MIC input with phantom power and a GROUPING function.
The SPL Manager, specifically designed for the application in fixed installations, is a very powerful tool that allows to schedule, in 4 different scenes,
16 events on each input and output, including MUTE, level change, COMPRESSOR threshold change and PRESET change. These events can be then
performed automatically according to the internal clock of the unit.
PC260 can be remotely controlled with PRONET software through the USB port on the front panel and it can be included in a PRONET network using
the two RJ-45 connectors on the rear panel (with the optional USB2CAN converter).
32
Processors PC SERIES
PC260
• 40bit floating point resolution CORE DSP
• Up to 600ms delay time on each INPUT and OUTPUT
• 24bit AD/DA converters
• Full METERING on each INPUT and OUTPUT
• 110dB dynamic range
• RTA with dedicated MIC input
• 5 bands of full PARAMETRIC EQ on each INPUT and OUTPUT
• GROUPING function
• 28 bands of GRAPHIC EQ on each INPUT
• SPL manager
• 3 bands of DYNAMIC EQ on each INPUT
• AES digital input
• Fully programmable COMPRESSOR/LIMITER on each INPUT and
• PRONET remote control thru USB and network capability
OUTPUT
PC260
INPUT SECTION
Inputs
2 electronically balanced - XLR F (IN) + XLR M (LINK)
Input Impedance
> 10k ohms
Maximum Input Level
+20dBu (-6dB pad)
Input gain
+6 dB to –30 dB in 0.2 dB steps
Digital Input
AES/EBU
OUTPUT SECTION
Outputs
6 - XLR M
Maximum Output Level
+20dBu
Output Gain
+15 dB to –30 dB in 0.2 dB steps and mute
CROSSOVER FILTERS
Slopes
6/12/18/24/48dB per octave
Type
Bessel / Butterworth / Linkwitz-Riley
DELAYS
Max Delay time
600 ms on all In and Out
Delay Step
21 μs
PARAMETRIC EQ FILTERS
Maximum number of filters
5 Per input / 5 per output
EQ Type
Parametric, Notch, Shelf, Bandpass, resonant HP/LP, Allpass
EQ Gain
+15 dB to -15 dB in 0.2 dB steps
Q (bandwidth)
0.4 to 28.85 (3 to 0.05, 1/20 oct. steps)
EQ freq
15.6 Hz – 22.62 kHz (1/20 oct. steps)
Shelving gains
±15 dB in 0.2 dB steps
DYNAMIC EQ FILTERS
Maximum number of filters
3 per input
EQ Type
Parametric, Shelf 6
EQ Gain
+15 dB to -15 dB in 0.2 dB steps
Q (bandwidth)
0.4 to 28.85 (3 to 0.05, 1/20 oct. steps)
EQ freq
15.6 Hz – 22.62 kHz (1/20 oct. steps)
Shelving gains
±15 dB in 0.2 dB steps
GRAPHIC EQ
Maximum number of EQ.
1 per input
EQ Type
28 band 1/3 oct.
EQ freq
31.5Hz - 16kHz 1/3 oct.
EQ Gain
+15 dB to -15 dB in 0.2 dB steps
EXTRA FEATURES
RTA range
20Hz-20kHz 1/3oct.
RTA mic input
15V phantom power
SPLM
4 scene /16 events for each scene
PROCESS \ CONVERSION
AD/DA conversion
24 bit
AD/DA latency
1.68 ms (analogue in – analogue out @ 48 kHz)
Sampling frequency
48 KHz
Internal porcessing
40 bit floating point
GENERAL PERFORMANCE (FILTERS OUT)
Frequency response
+½ dB 20 Hz~20 kHz
Dynamic range
>110 dB 20 Hz~20 kHz unwtd
Distortion (THD)
< 0.015% @ 1kHz, +18dBu
Display
192x32 LCD Graphic Display
Metering
Input: 2 x 4 LED - Output: 6 x 4 LED
Remote control
USB, RJ45 PRONET In/Out
GENERAL
Dimensions
44 x 482 x 295 mm
Weight
4.1 kg (9 lb)
AC Power
80 to 250V ±15% @ 50/60 Hz
Processors PC SERIES
DPX SERIES
DPX is a new series of ultra-lightweight power amplifiers able to offer to professional entertainers a huge amount of power and the maximum
performance and portability in a very affordable package.
Thanks to the high-density Class D technology employed in the DPX’s output stages, we’ve been able to build very powerful amplifiers in an ultracompact and lightweight package. The extremely efficient switch mode power supply (SMPS) helps to reduce further the weight, while using much
less energy with a direct benefit to the environment.
All models feature a built-in 24dB/octave stereo crossover with BI-AMP and HIGH-PASS options, for easily filtering a 2-way system without the need
of additional outboard. Fast-attack precise CLIP LIMITERS guarantee maximum output without distortion, while a comprehensive protection system
safeguards both the speakers and the amplifier.
The electronics is hosted in a feather-light all-aluminum case, able to provide an efficient cooling and, at the same time, protection and durability over
the years.
DPX are power amplifiers offering extraordinary value to entertainers, DJ and sound engineers looking for massive output, excellent performance and
absolute portability.
34
Power Amplifiers DPX SERIES
• Ultra-efficient SWITCH MODE POWER SUPPLY
• High-density CLASS D output stages
• Integrated fast-attack CLIP LIMITERS
• Built-in 24dB/oct. stereo CROSSOVER filter with BI-AMP and HPF
option
Power 8 ohm*
Power 4 ohm**
Power BRIDGE 8 ohm**
Damping Factor
• SPEAKON output connectors
S/N Ratio (Unweighted)
• Ultra-light all- aluminum chassis with die-cast handles
• TOTAL WEIGHT less than 6kg
650
1000
2000
Class D
Frequency Response
• XLR input and link connectors
• FRONT-TO-BACK ventilation system with variable speed fan
DPX2000
500
750
1500
Output Stage
Input Impedance
• Precise 8-segment LED ladders
DPX1500
350
500
1000
* W RMS per channel, both channel driven, 1KHz THD 1%, ** 40ms burst
• STEREO / BRIDGE / PARALLEL mode
• AC, DC, thermal, short-circuit and VHF protection
DPX1000
20 Hz - 20 kHz
10 kΩ unbalanced
20 kΩ balanced
>60
>102 dB
Input Connectors
XLR F (INPUT), XLR F (LINK)
Output Connectors
Controls
LED Indicators
Cooling
Protections
SPEAKON
INPUT LEVEL, STEREO/BRIDGE-PARALLEL, FLAT/BI-AMP/HPF
7-LED BAR (ON, LIMIT, PROTECTION, -5dB / -10dB / -20dB / -40dB SIGNAL)
Variable speed DC fan, air flow from front to rear
AC low power, DC, thermal, short circuit, VHF, CLIP limiter
Power Supply
230 VAC 50 Hz or 120 VAC 60 Hz
Dimensions (W x H x D)
Weight
483 x 89 x 382 mm
5 Kg (11 lb)
5.1 Kg (11.2 lb)
5.75 Kg (12.7 lb)
DPX1000
NEW
DPX1500
NEW
DPX2000
NEW
Power Amplifiers DPX SERIES
HPX SERIES
HPX is a series of power amplifiers designed to provide entertainers and audio professionals with quality performance and maximum portability
at a very affordable price.
Combining rock-solid CLASS AB, CLASS H and CLASS I power stages to extremely efficient SWITCH MODE power supplies, the HPX amplifiers delivers
from 900W to 8000W of pure power to your speaker system in 2-ohm operation, providing clear and defined highs together with extremely punchy
lows.
Thanks to the SMPS light-weight technology and to the efficient cooling systems, the HPX come in a very compact and portable package, yet sturdy
enough to provide the maximum protection and durability over the years.
In the models from 900 to 2800, a built-in selectable LPN (Low-Pass Notch) filter enhances the amplifier response at the low frequencies, providing an
increased punch while protecting the speakers from over-excursion and increasing the headroom.
HPX4600 and HPX6000 feature a 3-tier CLASS H power stage, while the biggest model of the series, HPX8000, makes use of the advanced CLASS I
technology, achieving a much greater efficiency and sonic quality than any other standard amplifier classes and offering an extremely high power
density. With an overall efficiency higher than 75% these three models represent a cost-effective solution also for large sound reinforcement systems
requiring very high power levels combined to top quality performance.
36
Power Amplifiers HPX SERIES
Power 8 ohm*
Power 4 ohm*
Power 2 ohm **
Power BRIDGE 8 ohm*
Power BRIDGE 4 ohm**
HPX900
HPX1200
HPX2400
HPX2800
HPX4600
HPX6000
HPX8000
200
300
450
600
900
300
450
600
900
1200
450
800
1200
1600
2400
600
1000
1400
2000
2800
850
1400
2300
2800
4600
1200
2000
3000
4000
6000
1800
3200
3900
6000
7200
* W RMS per channel, both channel driven, 1KHz THD 1%, ** 40ms burst
Output Stage
Class AB
Class H
Frequency Response
Input Impedance
Damping Factor
10 kΩ unbalanced - 20 kΩ balanced
>100
>200
Slew Rate
S/N Ratio (Unweighted)
>20v/us
>85 dB
>90 dB
Input Connectors
>80 dB
XLR M, 1/4” JACK, RCA
>85 dB
NEUTRIK Combo and XLR M
Output Connectors
SPEAKON and Binding Post
Detented INPUT LEVEL control, GAIN selector, STEREO/BRIDGE/PAR MODE selector
LOW-PASS NOTCH (LPN - 900 to 2800), GND lift, SOFT CLIPPING (4600, 6000)
Controls
LED Indicators
STANDBY, ON, PARALLEL, BRIDGE, SIGNAL, LIMIT, PROTECT - 8000: TEMP, -5/-10/-20
Cooling
Variabile speed DC fan
Protections
AC low power, DC, thermal, short circuit, VHF, CLIP limiter
Power Supply
230 VAC 50 Hz or 120 VAC 60 Hz
Dimensions (W x H x D)
Weight
Class I
20 Hz - 20 kHz
483 x 89 x 335
6.0 kg
(13.2 lb)
6.9 kg
(15.2 lb)
483 x 89 x 395
9.2 kg
(20.3 lb)
9.2 kg
(20.3 lb)
483 x 89 x 505
13.0 kg
(28.7 lb)
13.6 kg
(29.9 lb)
483 x 89 x 451
15.5 kg
(34.2 lb)
• Integrated CLIP LIMITERS (user-defeatable in 4600 and 6000)
• SPEAKON and binding post output connectors
• Selectable LPN filter (Low-Pass Notch - 900 to 2800)
• AC, DC, thermal and short-circuit protection
• STEREO/PARALLEL/BRIDGE mode
• FRONT-TO-BACK ventilation system with variable speed fan and
• 2- or 3-position GAIN selector
• XLR, 1/4” JACK and RCA input connectors (900 to 2800)
removable dust filters
• Compact chassis with die-cast handles
HPX900
HPX1200
HPX2400
HPX2800
HPX4600
HPX6000
HPX8000
Power Amplifiers HPX SERIES
NEW
HPD SERIES
HPD2004 and HPD4004 are high-performance professional 4-channel amplifiers employing PROEL DA modules, a new generation of digitally
controlled Cass D power amplifiers with Switch Mode Power Supply (SMPS) featuring an innovative technology.
Unlike most of the competitors in this range, which use a fixed switching frequency, the PWM (Pulse Width Modulation) output stage of DA modules
uses a variable switching frequency according to the input signal level. Thanks to a sophisticated hardware and software structure, this system offers
performances far above most of the products currently available on the market: better sound definition, high-fidelity reproduction of any frequency
of the audio range, higher dynamics at any signal level with low distortion even at very high powers. The superior sound quality can be compared
with top-of-the-range AB-class analog systems, while DA modules thanks to the use of SMPS and Class D feature very compact size and light weight,
efficiency above 90% and negligible heat dissipation.
The very high efficiency levels result also in a significant reduction in the energy waste associated with large installations, a noticeable reduction in
operating costs and a direct benefit to the environment. Featuring high power levels in a lightweight and compact chassis, the HPD amplifiers are much
easier and more economical to transport than conventional models and this, in turn, makes them even more environmentally friendly.
HPD amplifiers include an input section with the choice of different filtering options (FLAT / BI-AMP / HPF) and feature an ergonomic and functional
design with removable dust filters, for an easy maintenance in all conditions of use and therefore extensive durability. The protection system includes
thermal protection, short circuit protection, high frequency protection and CLIP LIMITER circuit.
38
Power Amplifiers HPD SERIES
HPD2004 - HPD4004
• Less than 12kg in 2 rack units for up to 4000W
• DA digitally controlled Class D power modules with SWITCH MODE power supply (SMPS)
• PWM (Pulse Width Modulation) output stages with variable switching frequency for a superior sound definition and very high dynamics at any
signal level
• Very efficienct Switch Mode Power Supply for a reduced power consumption
• Extensive protection system for maximum reliability
• Built-in 24dB/oct. stereo CROSSOVER filter with BI-AMP and HPF option
• Aluminum front panel with removable dust filters
• Made in Italy
Power 8 ohm
Power 4 ohm
Power BRIDGE 8 ohm
HPD2004
HPD4004
4x250
4x500
2x1000
4x500
4x1000
2x2000
W RMS, all channel driven, 1KHz THD 1%
Frequency Response
20 Hz - 20 kHz
Input Sensitivity
Voltage Gain
0 dB / 40 x
35 dB / 32 dB
38 dB / 32 dB
Input Impedance
10 kΩ unbalanced - 20 kΩ balanced
Damping Factor
>500 @ 8 Ω
S/N Ratio (Unweighted)
>105 dB
Input Connectors
Combo and XLR M
Output Connectors
Speakon
Cooling
variable speed DC fan
LED Indicators
Filtering options
protect, signal, bridge, limit
FLAT, HPF (100 Hz selectable High-Pass Filter), BI-AMP (100 Hz 24 dB/octave Crossover Filter)
Protections
DC, thermal, soft start, short circuit, CLIP limiter
Power Supply
230 VAC 50 Hz or 120 VAC 60 Hz
Rated 1/8 power output
800 VA
1350 VA
Max Power Consuption
2450 VA
4900 VA
Dimensions (W x H x D)
483 x 89 x 383
Weight
11 kg (24.3 lb)
Power Amplifiers HPD SERIES
rock’n’roll is
s here to stay
(Neil Young)
WAVE SERIES
In response to the increasing request for compact, lightweight and easy-to-use portable
PA systems, PROEL introduces the WAVE series, a new range of active speakers featuring
multiple inputs and a versatile MP3 player with BLUETOOTH connectivity at an unbeatable
price point.
Hosted in lightweight yet ultra-durable polypropylene cabinets, WAVE systems combine
selected HF and LF transducers with state of the art electronics, including a
sophisticated pre-amp section with active filtering and dual CLIP LIMITERS and efficient
Class D power amplifiers for the LF section.
The MEDIA PLAYER you can find on-board is able to play MP3 files not only from an SD card
or a USB MEMORY STICK, but also thru a BLUETOOTH connection. You only need to pair
your smartphone or your tablet with a WAVE speaker for playing music without the need
of any cable. Thanks to the built-in 2-channel mixer you can connect a microphone or an
additional external source to your PA and mix your sound with independent level controls
and a 2-band EQ. Setting and using a PA system has never been so easy.
The three models of the WAVE series can be used in a variety of applications, ranging from
speech diffusion and music playback to live music and DJ sets. The extremely versatile
cabinets can be mounted on standard speaker poles, laid on the side for the use as stage
monitors and even suspended using the built-in flying points.
All the models are also available in PASSIVE version for the use in fixed installations or in
systems with existing power amplifiers.
42
Loudspeakers WAVE SERIES
WAVE10A
WAVE10P
WAVE12A
WAVE12P
WAVE15A
WAVE15P
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• 1” compression driver with 1” VC
• 1” compression driver with 1.35” VC
• 1” compression driver with 1.35” VC
• 10” woofer with 2” voice coil
• 12” woofer with 2” voice coil
• 15” woofer with 2.5” voice coil
• 260 W total peak power
• 400 W total peak power
• 400 W total peak power
• Passive version available
• Passive version available
• Passive version available
ACTIVE
WAVE10A
WAVE12A
WAVE15A
System type
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
High Frequency Device
1” compression driver with 1”VC
1” compression driver with 1.35”VC
1” compression driver with 1.35”VC
Low Frequency Device
10” woofer with 1.5” voice coil
12” woofer with 2” voice coil
15” woofer with 2.5” voice coil
Angular Coverage
90° H x 60° V
90° H x 60° V
90° H x 60° V
Total peak power
260 W
400 W
400 W
HF Amplifier Continuous
Power
30 W Class AB
50 W Class AB
50 W Class AB
LF Amplifier Continuous
Power
100 W Class D
150 W Class D
150 W Class D
Frequency Response
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
Max SPL
122
123
125
Connectors
MIC/LINE IN: XLR-F + 1/4” JACK, LINE IN: XLR-F + 2xRCA LINE OUT:
XLR-M
MIC/LINE IN: XLR-F + 1/4” JACK, LINE IN: XLR-F + 2xRCA LINE OUT:
XLR-M
MIC/LINE IN: XLR-F + 1/4” JACK, LINE IN: XLR-F + 2xRCA LINE OUT:
XLR-M
Controls
MIC/LINE/LINE/MASTER LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ,
MEDIA PLAYER LEVEL + NAVIGATION
MIC/LINE/LINE/MASTER LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ,
MEDIA PLAYER LEVEL + NAVIGATION
MIC/LINE/LINE/MASTER LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ,
MEDIA PLAYER LEVEL + NAVIGATION
Power Supply
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
Weight
14 kg (30.8lb)
17 kg (37.4lb)
21 kg (46.3lb)
PASSIVE
WAVE10P
WAVE12P
WAVE15P
Nominal Impedance
8Ω
8Ω
8Ω
Power Rating (continuous)
150W
200 W
250 W
Power Rating (peak)
300 W
400 W
500 W
Frequency Response
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
Sensitivity
93 dB @ 1 W/1 m
94 dB @ 1 W/1 m
95 dB @ 1 W/1 m
Connectors
2 x SPEAKON linked
2 x SPEAKON linked
2 x SPEAKON linked
Weight
11 kg (24.2 lb)
14 kg (30.8lb)
18 kg (36.4 lb)
Flying System
2 x M8 - bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
Construction
Polypropylene
Polypropylene
Polypropylene
Mounting Pole
1 x bottom
1 x bottom
1 x bottom
Dimensions (W x H x D)
320 x 500 x 290 mm
390 x 620 x 350mm
480 x 740 x 430 mm
GENERAL SPECIFICATIONS
Loudspeakers WAVE SERIES
V SERIES
V Series is the new generation of PROEL powered loudspeakers delivering absolute value in terms of performance, engineering and design.
These ultra-portable speakers combine, in carefully engineered and light-weight cabinets, the clearest and most accurate PROEL sound with Class
D amplifier technology and Switch Mode Power Supply, offering an unbeatable PA solution at its price point.
All the models feature an extremely efficient amplifier module capable of delivering 600 W or 400 Wof robust power to the transducers. Thanks to the
use of SMPS technology, this power comes in an ultra-lightweight package, making the V models the most portable PROEL speakers ever. The
power module is hosted in a fully sealed aluminum box, which provides protection, perfect insulation of the cabinet from the outside and extremely
efficient cooling.
Thanks to the carefully selected speakers and to the sophisticated active electronics, including dual CLIP LIMITERS for an undistorted sound even at
the loudest level, the sound of the V Series has been precisely tuned in every details, in order to provide unheard performance in this price range.
The V series cabinets, expression of the most advanced Italian design, include a super-comfortable luggage-style top handle for an effortless portability.
The slanted shape allows the V speakers to be laid on their side and used also as stage monitors.
44
Loudspeakers V SERIES
V8A
V10A
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• 1” high-definition neodymium compression driver on a wide-
• 1” high-definition neodymium compression driver on a wide-
dispersion 90° x 60° constant coverage horn
dispersion 90° x 60° constant coverage horn
• 8” long-excursion woofer with 1.5” voice coil
• 10” long-excursion woofer with 2” voice coil
• 400 W total peak power amplifier
• 600 W total peak power amplifier
• SPL MAX 121 dB
• SPL MAX 123 dB
• Frequency response 70 Hz - 20 kHz
• Frequency response 60 Hz - 20 kHz
• 7 kg TOTAL WEIGHT
• 10 kg TOTAL WEIGHT
Loudspeakers V SERIES
V12A
V15A
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• 1” high-definition neodymium compression driver on a wide-
• 1” high-definition neodymium compression driver on a wide-
dispersion 90° x 60° constant coverage horn
dispersion 90° x 60° constant coverage horn
• 12” long-excursion woofer with 2.5” voice coil
• 15” long-excursion woofer with 2.5” voice coil
• 600 W total peak power amplifier
• 600 W total peak power amplifier
• SPL MAX 124 dB
• SPL MAX 126 dB
• Frequency response 60 Hz - 20 kHz
• Frequency response 50 Hz - 20 kHz
• 13 kg TOTAL WEIGHT
• 18 kg TOTAL WEIGHT
46
Loudspeakers V SERIES
OPTIONAL
ACCESSORIES
COVERV8
COVERV10
COVERV12
COVERV15
KPTNX04
Universal Wall Mount for Brackets
Cover for V8A -V10A -V12A V15A
KPTV8 - KPTV10 - KPTV12 KPTV15
System type
KPTV8
KPTV10
KPTV12
KPTV15
Brackets for V8A -V10A -V12A
- V15A
V8A
V10A
V12A
V15A
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
High Frequency Device
1” neodymium compression driver
1” neodymium compression driver
1” neodymium compression driver
1” neodymium compression driver
Low Frequency Device
8” woofer with 1.5” voice coil
10” woofer with 2” voice coil
12” woofer with 2.5” voice coil
15” woofer with 2.5" VC
Angular Coverage
90° H x 60° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
Total peak power
400 W
600 W
600 W
600 W
HF Amplifier Continuous
Power
50 W Class AB
50 W Class AB
50 W Class AB
50 W Class AB
LF Amplifier Continuous
Power
150 W Class D
250 W Class D
250 W Class D
250 W Class D
Power Supply
SMPS
SMPS
SMPS
SMPS
Processing
Analog
Analog
Analog
Analog
Frequency Response
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
Max SPL
121
123
124
126
Connectors
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
Controls
LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT,
FRONT LED selector
LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT,
FRONT LED selector
LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT,
FRONT LED selector
LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT,
FRONT LED selector
Monitor Taper
45°
45°
44°
44°
Flying System
4 x M8- top/bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
Construction
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Cabinet Colour
Black
Black
Black
Black
Handles
1 x top
1 x top
1 x top
1 x top, 2 x sides
Mounting Pole
1 x bottom
1 x bottom
1 x bottom
1 x bottom
Power Supply
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
Dimensions (W x H x D)
280 x 422 x 252 mm
330 x 512 x 280 mm
380 x 600 x 328 mm
440 x 712 x 400 mm
Weight
7 kg
10 kg
13 kg
18 kg
Loudspeakers V SERIES
V HDA SERIES
Following the worldwide success of V Series, PROEL introduces two brand new models offering advanced transducers, amplification and DSP
technology in the stylish and ultra-compact V package. V HDA feature carefully designed transducers combined with a powerful 1200W Class D
amplifier and PROEL high-resolution CORE processing, for an unmatched performance in their class.
The high-excursion 3” VC woofers, combined with CELESTION precision compression drivers mounted on the V Series wide coverage waveguide,
produce an impressive sound pressure level with a flat and extended response and a sound you usually expect from top-class professional systems.
The 1200W Class D SMPS amplifier module, hosted in a fully sealed aluminum box, provides a massive amount of power in a surprisingly compact
and lightweight package, raising the system’s portability to a new standard.
For processing the V HDA the PROEL’s R&D Lab has developed a new version of the proprietary CORE DSP, able to deliver ultimate performance to the
system tuning. Thanks to accurate crossover and EQ filters, precise compressors/limiters for the dynamic control and delay lines for the time alignment,
the CORE DSP provides a high-class signal management and the highest sound pressure level with the best sound quality.
The V HDA Series comprehensive and intuitive control interface features a single knob and a large LCD display for controlling the sound level
and 2-band EQ. 5 presets (MUSIC, LIVE, DJ, MONITOR, SPEECH) allow to tailor the system’s sound in order to get always the best sound for all kind of
applications. The CORE DSP includes also an intelligent Dynamic EQ with three different presets, able to adapt dynamically the sound equalization and
to obtain always the best acoustic response at any signal level.
This impressive set of features and technology is packed into one of the most compact and lightweight package available in its class, combining
maximum portability with top performance.
48
Loudspeakers V HDA SERIES
V12HDA
NEW
V15HDA
NEW
• Bi-amplified DSP controlled 2-way system
• Bi-amplified DSP controlled 2-way system
• 1” CELESTION compression driver on a wide-dispersion 90° x 60°
• 1” CELESTION compression driver with 1.4” VC on a wide-dispersion
constant coverage horn
90° x 60° constant coverage horn
• 12” long-excursion woofer with 3” voice coil
• 15” long-excursion woofer with 3” voice coil
• 1200 W total peak power amplifier
• 1200 W total peak power amplifier
• SPL MAX 127 dB
• Frequency response 55 Hz - 20 kHz
PROCESSED
• 15.5 kg TOTAL WEIGHT
• SPL MAX 128 dB
• Frequency response 45 Hz - 20 kHz
• 21 kg TOTAL WEIGHT
V12HDA
V15HDA
System type
2-way vented enclosure
2-way vented enclosure
High Frequency Device
1” CELESTION compression driver
1” CELESTION compression driver with 1.4”VC
Low Frequency Device
12” woofer with 3” voice coil
15” woofer with 3" VC
Angular Coverage
90° H x 60° V
90° H x 60° V
Total peak power
1200 W
1200 W
HF Amplifier Continuous Power
100 W Class AB
100 W Class AB
LF Amplifier Continuous Power
500 W Class D
500 W Class D
Power Supply
SMPS
SMPS
Processing
CORE LT digital processor
CORE LT digital processor
Frequency Response
50 Hz - 20 kHz
45 Hz - 20 kHz
Max SPL
127
128
Connectors
LINE IN: COMBO, MIC IN: XLR F, LINK: XLR M
LINE IN: COMBO, MIC IN: XLR F, LINK: XLR M
Controls
LCD display, DIAL, GND LIFT
LCD display, DIAL, GND LIFT
Monitor Taper
44°
44°
Flying System
4 x M10 - top/bottom
4 x M10 - top/bottom
Construction
Polypropylene
Polypropylene
Cabinet Colour
Black
Black
Handles
1 x top
1 x top, 2 x sides
Mounting Pole
1 x bottom
1 x bottom
Power Supply
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
Dimensions (W x H x D)
380 x 600 x 328 mm
440 x 712 x 400 mm
Weight
15.5 kg
21 kg
Loudspeakers V HDA SERIES
PROCESSED
FLASH SERIES
For years PROEL FLASH loudspeakers have provided thousands of users all around the world with the finest sound in its class together with versatility,
portability and style. Today the STANDARD (V2) and PREMIUM (HDA) models still offers the best in performance, features and design.
The FLASH V2 are powered by amplifier modules combining the high efficiency of Class D output stages with the light-weight and compact size of
Switch Mode Power Supply: this gives FLASH V2 a massive punch and a consistent reserve of power while making them light-weight and extremely
portable. The built-in 2-channel mixer with independent LINE and MIC inputs and 2-band EQ can turn any FLASH V2 system into an instant PA system.
The use of carefully selected speakers, including a new high-definition CELESTION compression driver, together with a sophisticated active signal
processor and a dual clip limiter, provide an accurate acoustic response and an amazing sound pressure level with very low distortion.
FLASH HDA feature high-power Class D SMPS amplifier modules with a massive power-per-size ratio and the powerful 40-bit 96KHz CORE DSP.
Thanks to the sophisticated signal processing provided by the CORE DSP, which includes also a versatile Dynamic EQ, and to the high-grade CELESTION
speakers, FLASH HDA delivers an outstanding sound definition and a dynamic performance typical of top-end professional systems. The 4 EQ
PRESETS selectable from the amplifier panel (FLAT, DJ, SPEECH, MONITOR) make these systems perfectly adaptable to any kind of application.
All the models include the classic FLASH features, such as light weight polypropylene cabinets with
extended internal ribbing and trapezoidal shape, constant wide-coverage (90° x 60°) high frequency
horns for a uniform and coherent dispersion, convenient transport handles and built-in flying points for
the use in fixed installation.
All the models in the FLASH Series can be combined with the powerful PROEL SW sub-woofers, which
provide the perfect low extension for creating high-power multi-way systems, to be used also in large
sound reinforcement applications.
50
Loudspeakers FLASH SERIES
FLASH5AV2
FLASH5PV2
BLACK
WHITE
FLASH8AV2
FLASH8PV2
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• Studio-grade dome tweeter on elliptical waveguide
• 1” CELESTION compression driver on a 90° x 60° constant
• 5” woofer with PP cone
coverage horn
• 200W total peak power
• 8” CELESTION woofer with 1.8” voice coil
• SPL MAX 114 dB
• 600 W total peak power
• Frequency response 70 Hz - 20 kHz
• Passive version available in BLACK (FLASH5P) and WHITE
(FLASH5PW)
FLASH12AV2
FLASH12PV2
• SPL MAX 122 dB
• Frequency response 70 Hz - 20 kHz
• Passive version available
FLASH15AV2
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• 1” CELESTION compression driver on a 90° x 60° constant
• 1” CELESTION compression driver on a 90° x 60° constant
coverage horn
coverage horn
• 12” woofer with 2” voice coil
• 15” CELESTION woofer with 2.5” voice coil
• 600 W total peak power
• 600 W total peak power
• SPL MAX 124 dB
• SPL MAX 127 dB
• Frequency response 60 Hz - 20 kHz
• Frequency response 50 Hz - 20 kHz
• Passive version available
Loudspeakers FLASH SERIES
FLASH12HDA
FLASH15HDA
• Active processed 2-way loudspeaker systems
• Active processed 2-way loudspeaker systems
• 1” CELESTION compression driver with 1.75” VC on a constant
• 1” CELESTION compression driver with 1.75” VC on a constant
coverage 90° x 60° horn
coverage 90° x 60° horn
• 12” CELESTION woofer with 3” VC
• 15” CELESTION woofer with 3” VC
• 1200 W peak power
• 1200 W peak power
• 96 KHz, 40bit floating point CORE DSP with Dynamic EQ (DEQ)
• 96 KHz, 40bit floating point CORE DSP with Dynamic EQ (DEQ)
• 4 EQ PRESETS (FLAT, DJ, SPEECH, MONITOR)
• 4 EQ PRESETS (FLAT, DJ, SPEECH, MONITOR)
• SPL MAX 128 dB
• SPL MAX 129 dB
• Frequency response 50 Hz - 20 kHz
• Frequency response 45 Hz - 20 kHz
PROCESSED
52
Loudspeakers FLASH SERIES
SNWH
OPTIONAL
ACCESSORIES
ABS installation bracket
for FLASH5PW (white)
KPTFL5
KPTFL5W
SNBK
ABS installation bracket
for FLASH5P (black)
Brackets for FLASH5
Black and White
COVERFL8
COVERFL12
COVERFL15
KPTNX04
Universal Wall Mount for Brackets
FLASH5 - FLASH8 - FLASH12 - FLASH15
KPTFL8
- KPTFL12 - KPTFL15
Brackets for FLASH8 - FLASH12 - FLASH15
ACTIVE
FLASH5A
FLASH8A V2
FLASH12A V2
FLASH15A V2
FLASH12HDA
FLASH15HDA
System type
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
High Frequency
Device
Soft dome tweter on elliptical
waveguide
1’’ compression driver
with aluminum voice coil
1’’ compression driver
with aluminum voice coil
1’’ compression driver
with aluminum voice coil
1’’ compression driver with 1.75 VC
1’’ compression driver with 1.75 VC
Low Frequency
Device
5 woofer with PP cone
8 woofer with 1.8 VC
12 woofer with 2 VC
15 woofer with 2.5 VC
12 woofer with 3 VC
15 woofer with 3 VC
Angular Coverage
90° H x 60° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
Total Peak Power
200 W
600 W
600 W
600 W
1200 W
1200 W
HF Amplifier
Continuous Power
20 W Class AB
50 W Class AB
50 W Class AB
50 W Class AB
100 W Class AB
100 W Class AB
LF Amplifier
Continuous Power
80 W Class D
250 W Class D
250 W Class D
250 W Class D
500 W Class D
500 W Class D
Power Supply
Linear
SMPS
SMPS
SMPS
SMPS
SMPS
96 KHz, 40 bit floating point
CORE DSP
Processing
Analog
Analog
Analog
Analog
96 KHz, 40 bit floating point
CORE DSP
Frequency
Response
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
Max SPL
114
122
124
127
128
129
Connectors
IN/LINK: XLR F, 1/4 JACK,
2 x RCA
IN: Combo, XLR F
MIX OUT: XLR M
IN: Combo, XLR F
MIX OUT: XLR M
IN: Combo, XLR F
MIX OUT: XLR M
IN: XLR F
LINK: XLR M
IN: XLR F
LINK: XLR M
Controls
LEVEL, NEARFILED/MIDFIELD,
GND LIFT
MIC LEVEL, LINE LEVEL,
LOW EQ, HIGH EQ, GND LIFT
MIC LEVEL, LINE LEVEL,
LOW EQ, HIGH EQ, GND LIFT
MIC LEVEL, LINE LEVEL,
LOW EQ, HIGH EQ, GND LIFT
LEVEL, MIC/LINE SELECTOR,
PRESET (FLAT/DJ/SPEECH/MON),
GND LIFT
LEVEL, MIC/LINE SELECTOR,
PRESET (FLAT/DJ/SPEECH/MON),
GND LIFT
Power Supply
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
Weight
3.6 kg (7.9 lb)
8.5 kg (18.7 lb)
16.5 kg (36.4 lb)
23.5 kg (51.8 lb)
19.4 kg (47.7 lb)
26.5 kg (60.6 lb)
PASSIVE
FLASH5P
FLASH8P V2
FLASH12P V2
Nominal
Impedance
16 Ω
8Ω
8Ω
Power Rating
(continuous)
80 W
150 W
200 W
Power Rating
(peak)
160 W
300 W
400 W
Frequency
Response
80 Hz - 20 kHz
70 Hz - 20 kHz
60 Hz - 20 kHz
Sensitivity
91 dB @ 1 W/1 m
96 dB @ 1 W/1 m
98 dB @ 1 W/1 m
Crossover
Frequency
3000 Hz
3000 Hz
2000 Hz
Connectors
Push terminals
2 x SPEAKON linked
2 x SPEAKON linked
Weight
2.5 kg (5.5 lb)
8 kg (17.6 lb)
16.5 kg (36.4 lb)
GENERAL SPECIFICATIONS
Monitor Taper
42°
42°
42°
42°
42°
42°
Flying System
3 x M6 - top/bottom
4 x M8 - top/bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
4 x M10 - top/bottom
Construction
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Polypropylene
Mounting Pole
-
1 x bottom
1 x bottom
1 x bottom
1 x bottom
1 x bottom
Dimensions (W x
H x D)
175 x 265 x 176.5 mm
270 x 420 x 260 mm
390 x 630 x 360 mm
470 x 730 x 400 mm
390 x 630 x 360 mm
470 x 730 x 400 mm
Loudspeakers FLASH SERIES
LITE SERIES
The LITE Series by PROEL is an extended range of active and passive
speaker systems with plywood cabinet offering the renowned PROEL
sound and a high-level performance in a reliable and affordable
package.
For the construction of the cabinets we have used plywood, a very
lightweight and durable material that makes moving and installing these
speakers very quick and easy. Strong, anti-scratch paint and steel grilles
with an internal foam layer provide proper protection for years of service.
The dual-angle pole holder featured in 8”, 10”, 12” and 15” models offers
the possibility to obtain a more uniform coverage of the audience.
For the high frequency reproduction of LITE Series we have designed
wide-dispersion horns, able to provide constant coverage for
large audiences and detailed response with low distortion. The highexcursion woofers, together with carefully tuned vented cabinets, offers
an extended response with deep and tight basses.
The LITE Series includes 6 active models ranging from 6.5” to dual
15” woofers, plus 1 satellites + subwoofer system. The extremely
lightweight power modules used in the active models feature the latest
technologies for amplification, such as Switch Mode Power Supply
and CLASS D output stages, which provides a massive amount of power
with a reduced weight. The power modules are hosted in fully-sealed diecast aluminum boxes that provides protection, perfect insulation of the
cabinet from the outside and extremely efficient cooling. Each module
includes a sophisticated pre-amp section with up to 24 dB/oct. phase
aligned crossover filters and active EQ filters for the system’s fine tuning.
The DUAL LIMITER circuit ensures an undistorted sound even at the
loudest level and a total loudspeaker protection.
4 passive models are also available, featuring carefully designed
crossover filters with HF electronic protection. The choice of black or white
cabinet, built-in flying points and a wide range of accessories make them
suitable for any kind of fixed installation.
The LT loudspeaker systems can be combined with the SW subwoofers,
available in 5 models and capable of providing the perfect low frequency
extension for each model of the series.
54
Loudspeakers LITE SERIES
LT6A / LT6P
BLACK
WHITE
LT8A / LT8P
BLACK
WHITE
• Active 2-way loudspeaker systems
• Active 2-way loudspeaker systems
• 1” neodymium tweeter
• 1” compression driver with 1” VC on a constant coverage 60° x 40°
• 6.5” woofer with 1” VC
horn
• 150 W peak power
• 8” woofer with 1.5” VC
• SPL MAX 110 dB
• 400 W peak power
• Frequency response 75 Hz - 20 kHz
• SPL MAX 121 dB
• LT6P: passive version available in BLACK and
• Frequency response 70 Hz - 20 kHz
WHITE
Loudspeakers LITE SERIES
• LT8P: passive version available in BLACK and WHITE
LT10A / LT10P
BLACK
WHITE
LT12A / LT12P
BLACK
WHITE
• Active 2-way loudspeaker systems
• Active 2-way loudspeaker systems
• 1” compression driver with 1” VC on a constant coverage 90° x 60°
• 1” compression driver with 1.35” VC on a constant coverage 90° x 60°
horn
horn
• 10” woofer with 2” VC
• 12” woofer with 2.5” VC
• 600 W peak power
• 600 W peak power
• SPL MAX 123 dB
• SPL MAX 124 dB
• Frequency response 60 Hz - 20 kHz
• Frequency response 50 Hz - 20 kHz
• LT10P: passive version available in BLACK and WHITE
• LT12P: passive version available in BLACK and WHITE
56
Loudspeakers LITE SERIES
LT15A
LT215A
• Active 2-way loudspeaker systems
• Active 3-way loudspeaker systems
• 1” compression driver with 1.35” VC on a constant coverage 90° x 60°
• 1” compression driver with 1.35” VC on a constant coverage 90° x 60°
horn
horn
• 15” woofer with 2.5” VC
• 2x15” woofer with 2.5” VC
• 600 W peak power
• 1200 W peak power
• SPL MAX 126 dB
• SPL MAX 132 dB
• Frequency response 45 Hz - 20 kHz
• Frequency response 40 Hz - 20 kHz
Loudspeakers LITE SERIES
LT812SAT
LT812SUB
2-way vented enclosure
Vented sub-woofer
High Frequency
Device
1” compression driver with 1" VC
-
Low Frequency
Device
8” woofer with 1.5”VC
12” woofer with 3” voice coil
System type
LT812A
• 3-way SAT + SUB active loudspeaker system
• SAT: 1” compression driver + 8” woofer with 1.5” VC
• SUB: 12” woofer with 3” VC
• 1600W peak power
• SPL MAX 121dB + 124dB
• Frequency response 45 Hz - 20 kHz
• Two SPEAKON power cables included
Angular Coverage
Max SPL
60° H x 40° V
-
121
124
System Frequency
Response
45 Hz - 20 kHz
Amplifier Total Peak
Power
Amplifier
Continuous Power
1600 W
SAT: 2 x 200 W Class AB - SUB: 400 W Class D
Power Supply
SMPS
Processing
Analog
Controls
Connectors
Cabinet construction
SUB LEVEL, GND LIFT
1 x SPEAKON
IN: 2 x COMBO, LINK: 2 x XLR M
OUT: 2 x SPEAKON
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Cabinet Colour
Black
Black
Handles
1 x rear
2 x sides
1 x bottom, dual angle
1 x top
Mounting Pole
Power Supply
Dimensions (W x
H x D)
Weight
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector
220 x 442 x 260 mm
475 x 462 x 610 mm
7.5 kg / 16.5 lbs.
34 kg / 74.9 lbs.
58
Loudspeakers LITE SERIES
OPTIONAL
ACCESSORIES
KPTNX04
Universal Wall Mount for Brackets
KPTLTP
LT6 - LT8 - LT10 - LT12
Brackets for LT
PASSIVE
KPTLT6 - KPTLT8 - KPTLT10 - KPTLT12
Brackets for LT6 - LT8 - LT10 - LT12
ACTIVE
LT6A
LT8A
LT10A
LT12A
LT15A
LT215A
System type
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
3-way vented enclosure
High Frequency Device
1" neodymium tweter
1” compression driver with 1" VC
1” compression driver with 1" VC
1” compression driver with 1.35" VC 1” compression driver with 1.35" VC 1” compression driver with 1.35" VC
Low Frequency Device
6,5” woofer with 1”VC
8” woofer with 1.5”VC
10” woofer with 2” voice coil
12” woofer with 2.5” voice coil
15” woofer with 2.5" VC
2x15” woofer with 2.5" VC
Angular Coverage
60° H x 40° V
60° H x 40° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
90° H x 60° V
Total Peak Power
150 W
400 W
600 W
600 W
600 W
1200 W
HF Amplifier Continuous
75 W
Power
50 W Class AB
50 W Class AB
50 W Class AB
50 W Class AB
100 W Class AB
LF Amplifier Continuous
Power
150 W Class D
250 W Class D
250 W Class D
250 W Class D
500 W Class D
Power Supply
LINEAR
SMPS
SMPS
SMPS
SMPS
SMPS
Processing
Analog
Analog
Analog
Analog
Analog
Analog
Frequency Response
75 Hz - 20 kHz
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
40 Hz - 20 kHz
Max SPL
110 dB
121
123
124
126
132
Connectors
IN: COMBO, 2xRCA LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
IN: COMBO, LINK: XLR M
Controls
LEVEL, LINE/MIC selector
LEVEL, LINE/MIC selector
LOW EQ, HIGH EQ, GND LIFT
FRONT LED selector
LEVEL, LINE/MIC selector
LOW EQ, HIGH EQ, GND LIFT
FRONT LED selector
LEVEL, LINE/MIC selector
LOW EQ, HIGH EQ, GND LIFT
FRONT LED selector
LEVEL, LINE/MIC selector
LOW EQ, HIGH EQ, GND LIFT
FRONT LED selector
LEVEL, LINE/MIC selector
LOW EQ, HIGH EQ, GND LIFT
FRONT LED selector
Power Supply
230 VAC or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
230 or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
230 or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
230 or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
230 or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
230 or 120 VAC 50/60 Hz
with LINE VOLTAGE selector
Weight
5.9 kg / 13 lbs
8.5 kg / 18.7 lbs.
12.5 kg / 27.6 lbs.
16.5 kg / 36.4 lbs.
21 kg / 46.3 lbs.
34 kg / 74.9 lbs.
PASSIVE
LT6P
LT8P
LT10P
LT12P
Nominal Impedance
8 ohm
8 ohm
8 ohm
8 ohm
Power Rating
(continuous)
75 W
150W
200 W
300 W
Power Rating (peak)
150 W
300 W
400 W
600 W
Frequency Response
75 Hz - 20 kHz
70 Hz - 20 kHz
60 Hz - 20 kHz
50 Hz - 20 kHz
SPL (1w / 1m)
88 dB
92 dB
94 dB
96 Db
Crossover Frequency
3000 Hz
3000 Hz
2000 Hz
2000 Hz
Connectors
2 x SPEAKON, 2 x JACK
2 x SPEAKON
2 x SPEAKON
2 x SPEAKON
Weight
4.9 kg / 10.8 lbs.
7.5 kg / 16.5 lbs.
11.5 kg / 25.4 lbs.
15.5 kg / 34.2 lbs.
Flying System
1 x M4 top / 2 x M4 bottom
2 x M5 rear (only passive)
4 x M10 top/bottom
3 x M5 rear (only passive)
4 x M10 top/bottom
3 x M5 rear (only passive)
4 x M10 top/bottom
3 x M5 rear (only passive)
4 x M10 - top/bottom
4 x M10 - top/bottom
Cabinet construction
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Plywood with anti-scratch paint
Cabinet Colour
Black (active)
Black or White (passive)
Black (active)
Black or White (passive)
Black (active)
Black or White (passive)
Black (active)
Black or White (passive)
Black
Black
Handles
1 x rear
1 x rear
2 x sides
2 x sides
1 x top, 2 x sides
Mounting Pole
1 x bottom, dual angle
1 x bottom, dual angle
1 x bottom, dual angle
1 x bottom, dual angle
1 x bottom
220 x 442 x 260 mm
340 x 515 x 310 mm
380 x 595 x 360 mm
448 x 670 x 410 mm
448 x 1060 x 450 mm
GENERAL SPECIFICATIONS
Dimensions (W x H x D)
204 x 295 x 223 mm
Loudspeakers LITE SERIES
SW SERIES
The SW Series is a range of sub-woofers designed to complement PROEL full-range passive or active speakers. The variety of size, power and SPL
offered by the five SW models provides the perfect low extension solution for any speaker model available in the PROEL range.
All the SW models feature large VC woofers and band-pass configuration, which provide very ‘punchy’ and dynamic lows, or vented design for a
deep and extended low frequency response.
The CLASS D amplifier modules with SMPS (Switch Mode Power Supply) can generate a massive amount of continuous power in a compact,
lightweight and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and
PHASE reverse switch. The cabinets are built with 15/18mm plywood and feature 2 or 3 metal handles and sturdy 75mm wheels for an easy transport
(except SW110).
60
Loudspeakers SW SERIES
SW118HAV2
SW115HAV2
• Active band-pass sub-woofer
• Compact active band-pass sub-woofer
• 18” die-cast CELESTION woofer with 4” VC for an extended response
• 15” CELESTION woofer with 3” VC for a very high pressure level and
and very deep bass
tight lows
• 2000 W peak power
• 1000 W peak power
• SPL MAX 131 dB
• SPL MAX 128 dB
• Frequency response 34 Hz - 140 Hz
• Frequency response 37 Hz - 160 Hz
Loudspeakers SW SERIES
SW118A
SW115AV2
• Compact active vented sub-woofer
• Compact active sub-woofer in BPS configuration (series-loaded
• 18” woofer with 3” VC for a deep and extended response
band-pass)
• 1000 W peak power
• 15” woofer with 3” VC for a quick and dynamic response
• STEREO input, link and output
• 700 W peak power
• SPL MAX 129 dB
• SPL MAX 126dB
• Frequency response 36 Hz - 140 Hz
• Frequency response 40 Hz - 160 Hz
• Passive version available (SW118P)
• Passive version available (SW115P)
62
Loudspeakers SW SERIES
SW110AV2
• Very compact active band-pass sub-woofer for portable systems
and fixed installations
• 10” woofer with 2 x 2.5” VC for a high output level and punchy lows
• 500 W peak power
• SPL MAX 122dB
• Frequency response 46 Hz - 160 Hz
ACTIVE
SW110A
SW115A
SW118A
SW115HAV2
SW118HAV2
System type
Bandpass enclosure subwoofer
BPS enclosure subwoofer
Vented enclosure subwoofer
BPS enclosure subwoofer
Bandpass enclosure subwoofer
Loudspeaker
10 woofer with 2x2.5 VC
15 woofer with 3 VC
18'' woofer with 3 VC
15 woofer with 3 VC
18'' woofer with 4 VC
Amplifier Continuous
Power
250 W
350 W
500 W
500 W
1000 W
Frequency Response
46 Hz - 160 Hz
40 Hz - 160 Hz
36 Hz - 140 Hz
37 Hz - 160 Hz
34 Hz - 140 Hz
Max SPL
116 dB
126 dB
129 dB
128 dB
131 dB
Connectors
IN: 2 x NEUTRIK COMBO
OUT: 2 x NEUTRIK XLR-M
LINK: 2 x NEUTRIK XLR-M
IN: 2 x NEUTRIK COMBO
OUT/LINK: 2 x JACK ¼’’, 2 x XLR-M
IN: 2 x NEUTRIK COMBO
OUT: 2 x NEUTRIK XLR-M
LINK: 2 x NEUTRIK XLR-M
IN: 2 x NEUTRIK COMBO
OUT: 2 x NEUTRIK XLR-M
LINK: 2 x NEUTRIK XLR-M
IN: 2 x NEUTRIK COMBO
OUT: 2 x NEUTRIK XLR-M
LINK: 2 x NEUTRIK XLR-M
Controls
Volume, GND lift
X-over Frequency, Phase
Volume, Stereo/Mono, Flat Out
GND lift, X-over frequency, Phase
Volume, GND lift
X-over Frequency, Phase
Volume, GND lift
X-over Frequency, Phase
Volume, GND lift
X-over Frequency, Phase
Power Supply
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
Weight
14 kg (30.8lb)
27.5 kg (60.6 lb)
35.5 kg (78.3 lb)
29.5 kg (65 lb)
51 kg (70.6 lb)
PASSIVE
SW115P
SW118P
Nominal Impedance
8Ω
8Ω
Power Handling
(continuous)
350 W
500 W
Power Handling (peak)
700 W
2000 1
Frequency Response
40 Hz - 160 Hz
36 Hz - 170 Hz (without filter)
Sensitivity
97 dB @ 1 W/1 m
98 dB @ 1 W/1 m
Crossover Frequency
160 Hz, 12 dB/oct LP - 6 dB/oct HP
suggested 120 Hz
Connectors
2 x NEUTRIK SPEAKON (IN/OUT)
2 x NEUTRIK SPEAKON (IN/LINK)
Weight
29 kg (63.9 lb)
34 kg (74.9 lb)
15/18 mm plywood
Black anti-scratch paint
1.5 mm metal grille
2 x steel handles
1 x pole holder
4 x 75 mm wheels
15/18 mm plywood
Black anti-scratch paint
1.5 mm metal grille
2 x steel handles
1 x pole holder
4 x 75 mm wheels
15/18 mm plywood
Black anti-scratch paint
1.5 mm metal grille
2 x steel handles
1 x pole holder
4 x 75 mm wheels
15/18 mm plywood
Black anti-scratch paint
1.5 mm metal grille
3 x steel handles
1 x pole holder
4 x 75 mm wheels
430 x 550 x 600 mm
520 x 660 x 640 mm
430 x 550 x 600 mm
595 x 700 x 700 mm
GENERAL SPECIFICATIONS
Cabinet
15/18 mm plywood
Black anti-scratch paint
1 handle
1 x pole holder
Dimensions (W x H x D) 520 x 330 x 350 mm
Loudspeakers SW SERIES
WD SERIES
The WEDGE Series is a complete range of active stage monitors designed to offer not only to professional musicians and rental companies, but
also to amateur musicians and non-professional users, a highly valuable monitoring solution at a very affordable price. The WEDGE stage monitors
provide a perfect sound intelligibility and a high SPL in an extremely light-weight and portable enclosure.
The coaxial transducers, designed under PROEL specifications, represent the best choice for stage monitors, not only because they fit into more
compact cabinets, but also for the fact that they provide a perfect alignment in the emission of high and low frequencies and a controlled directivity
for a perfect listening from any position.
The lightweight CLASS D amplifier modules with SMPS, coupled to a sophisticated analog processing, provide an impressive sound pressure
level, with an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are
available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH).
The low-profile, stylish and unobtrusive cabinet, with recessed handles and scratch-resistant polyurethane painting, fits perfectly on any stage.
The three models available offer the perfect solution for different monitoring situations. The ultra-compact WD10A offers a high-performance
monitoring also on small stages or venues with a limited space and it ‘s the ideal solution for speech, vocals and keyboards. WD12A, with its high
SPL and its full-range response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs. Finally
WD15A, with its full extension and powerful and deep response at the low frequencies, is the ideal monitor for bass and drums players. The hornloaded HF section and the powerful amplifier make it the perfect solution for monitoring also in very large stages.
64
Loudspeakers WD SERIES
WD10A
WD12A
WD15A
• Active 2-way coaxial stage monitor
• Active 2-way coaxial stage monitor
• Active 2-way coaxial stage monitor
• 1” neodymium compression driver with
• 1” compression driver with 1.35” VC
• 1” compression driver with 1.35” VC on a
1” VC
waveguide
• 12” woofer with 2.5” VC
• 10” woofer with 2” VC
• 700 W total peak power
• 15” woofer with 3” VC
• 500 W total peak power
• SPL MAX: 124dB
• 900 W total peak power
• SPL MAX: 123dB
• Frequency response: 50 Hz - 20 kHz
• SPL MAX: 126dB
• Frequency response: 60 Hz - 20 kHz
• Frequency response: 45 Hz - 20 kHz
OPTIONAL
ACCESSORIES
CPWD10 - CPWD12 - CPWD15
WEDGE SERIES FLIGHT CASE (for 2 unit)
WD10A
WD12A
WD15A
2-way coaxial vented enclosure
2-way coaxial vented enclosure
2-way coaxial vented enclosure
High Frequency Device
1” neo compression driver with 1"VC
1” compression driver with 1"VC
1” compression driver with 1.35”VC
Low Frequency Device
10” woofer with 2"VC
12” woofer with 2.5"VC
15” woofer with 3"VC
System type
Angular Coverage
80° H x 80° V
80° H x 80° V
60° H x 60° V
Total Peak Power
500 W
700 W
900 W
50 W Class AB
HF Amplifier Continuous Power
50 W Class AB
50 W Class AB
LF Amplifier Continuous Power
200 W Class D
300 W Class D
400 W Class D
Power Supply
SMPS
SMPS
SMPS
Processing
Analog
Analog
Analog
Frequency Response
60 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
Max SPL
123 dB
124 dB
126 dB
Connectors
IN: Combo LINK: XLR M
IN: Combo LINK: XLR M
IN: Combo LINK: XLR M
LEVEL, PRESET selector (MONITOR, FOH), GND lift
Controls
LEVEL, PRESET selector (MONITOR, FOH), GND lift
LEVEL, PRESET selector (MONITOR, FOH), GND lift
Power Supply
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
230 VAC or 120 VAC 50/60 Hz
Monitor Taper
36°
36°
36°
Construction
Plywood with black anti-scratch polyurethane paint
Plywood with black anti-scratch polyurethane paint
Plywood with black anti-scratch polyurethane paint
Mounting Pole
1 x side
1 x side
1 x side
2 x side
Handles
2 x side
2 x side
Dimensions (W x H x D)
480x300x420 mm
510x340x500 mm
610x365x545 mm
Weight
11 kg (24.25 lb)
15 kg (33 lb)
18 kg (43 lb)
Loudspeakers WD SERIES
FOTO DI GRUPPO XEOS
SU FONDO SCURO
UTILIZZARE QUELLA ESISTENTE RILAVORATA
XEOS SERIES
XEOS is a series of INSTALLATION speakers including a selected number of surface-mount and ceiling models, designed for contractors and installers
looking for a wide choice of cost-effective, elegantly designed speakers with good quality sound.
The elegant front baffle of the three surface-mount models, with a full protection grille and a new stylish and unobtrusive aluminium logo, allows
these speakers (available in black or white) to blend perfectly in any environment. The horn-loaded dome tweeters and the carefully designed
crossover filters provide a smooth and detailed response, suitable both for paging and background music applications. All the three models feature
built-in line transformers and C-shaped brackets for an easy installation in vertical or horizontal position.
The two square-shape 2-way ceiling models provide hi-fidelity sound and feature a low impedance input, while the round shape ceiling models
offer the choice of a versatile 5” full range or a high-quality 6.5” two-way solution.
XE35T
XE55T
XE65T
• 2 - way surface-mount systems
• 3.5”, 5” and 6.5” polypropylene woofers
• Dome tweeter on elliptical waveguide
• Built-in 70V/100V line transformer with power taps
• Low impedance mode
• C-shape metal bracket
• Available in black or white
66
Loudspeakers XEOS SERIES
XE65CTX - XE55CTX
XE65CT - XE51CT
• Square shape 2-way coaxial ceiling systems
• Round shape ceiling systems
• 5” and 6.5” woofers
• 5” full- range and 6.5” 2-way coaxial
• Dome tweeter
• Built-in 100V line transformer
• Built-in 70V/100V line transformer with power taps
• Available in white
• Low impedance mode
• Available in white
175 mm
 179 mm
145 mm
 165 mm
SQUARE DIE CUT
HOLE DIE CUT
OPTIONAL
ACCESSORIES
SNWH
ABS installation bracket
for XE55T (white)
COVER5X
COVER6X
KPTSP01WH
KPTSP01BK
SNBK
Metal accessories
for installation
RAL 9010 color
Available for XE55T and XE65T in white
(KPTSP01WH) or black (KPTSP01BK) color.
ABS installation bracket
for XE55T (black)
XE35T
XE55T
XE65T
XE55CTX
XE65CTX
XE51CT
XE65CT
2-way system
2-way system
2-way system
2-way system
2-way system
Full-range system
2-way system
HF driver
1” dome tweeter horn
loaded
1” dome tweeter horn
loaded
1” dome tweeter horn
loaded
1” coaxial tweeter
1” coaxial tweeter
-
1” coaxial tweeter
LF driver
3.5” woofer
5” woofer
6.5” woofer
5” woofer
6.5” woofer
5” full-range
6.5” woofer
Continuous
15 W
30 W
40 W
30 W
40 W
10 W
20 W
Peak
30 W
60 W
80 W
60 W
80 W
20 W
40 W
8 ohm
8 ohm
8 ohm
8 ohm
8 ohm
-
-
70/100 V
70/100 V
70/100 V
70/100 V
70/100 V
100 V
100 V
Screw terminals
Screw terminals
System type
Power
Nominal impedance
Line input
Connections
Controls
Frequency response (-10 dB)
SPL (1W/1m, 1 kHz)
Weight (kg)
Dimensions (mm)
Mounting hole (mm)
Colour
70/100 V voltage tap
70/100 V voltage tap
selector
selector
8 ohm - 1/2/4/7.5/15 W 8 ohm - 1/2/5/10/30 W
power tap selector
power tap selector
2 x binding post
Wire terminals
Wire terminals
Wire terminals
Wire terminals
70/100 V voltage tap
selector
8 ohm - 2/5/10/20/40
W power tap selector
70/100 V voltage tap
selector
8 ohm - 1/2/5/15/30 W
power tap selector
70/100 V voltage tap
selector
8 ohm - 2/5/10/20/40
W power tap selector
2.5/5/10W power tap
selector
2.5/5/10/20 W power
tap selector
70-20 kHz
70-20 kHz
50 - 20 kHz
50 - 20 kHz
50 - 20 kHz
100 - 20 kHz
70 - 20 kHz
85 dB
87 dB
87 dB
87 dB
87 dB
90 dB
87 dB
1.8
2.7
3.7
1.3
1.7
1
1.2
130x198x130
181x240x172
217x288x204
170x170x63
200x200x77
Ø 191.5 - H 78
Ø 204 - H 85
-
-
-
145x145
175x175
Ø 165
Ø 179
black XE35TB
white XE35TW
black XE55TB
white XE55TW
black XE65TB
white XE65TW
white
white
white
white
Loudspeakers XEOS SERIES
XENIA SERIES
XENIA is a series of speakers designed specifically for high-profile installed sound applications and
featuring contemporary Italian styling and advanced technical solutions. The XENIA speakers utilize highdefinition neodymium dome tweeters and high-efficiency woofers, together with carefully designed
crossover filters, providing high-fidelity, full-range sound for a wide scope of installations where superior
audio quality is a key requirement. All models include as a standard feature a 70/100 V line transformer
and multiple voltage taps for a perfect integration in large distributed systems.
The surface-mount models are hosted in injection molded high-impact ABS cabinets featuring an
innovative cosmetic design, which allows the sound system to blend perfectly into any stylish environment
or decor. The use of fully sealed cabinets, polypropylene woofer cones and aluminum grilles make them
suitable for the installation in outdoor venues (IP55).
The innovative wall bracket integrates the electrical connections and it can be pre-installed in the
venue and connected to the sound system before placing the speakers. When the whole installation is
completed, the speakers can be placed and connected in a flash just ‘plugging’ them into the bracket
terminal. The speakers can also be secured using the provided steel safety wire. The XENIA wall bracket
allows a 120° horizontal or vertical rotation, providing the optimal coverage for any position in the
venue.
The two surface-mount models suit a variety of installed sound system, offering a high-profile solution
for paging and background music in small-size environments or full-range sound in bars, department
stores and outdoor venues.
One ceiling and one in-wall model, featuring the same high-quality sound and stylish design, complete
the series.
68
Loudspeakers XENIA SERIES
X30T
X50T
• Passive two-way, wall-
• Passive two-way, wall-
mount loudspeaker system
• High-definition dome
mount loudspeaker system
• High-definition dome
tweeter on elliptical
waveguide
tweeter on elliptical
waveguide
• 3” woofer with PP cone
• 5” woofer with PP cone
• Ultra-compact ABS cabinet
• Compact ABS cabinet with
with aluminum grille
• Built-in 70V / 100V line
transformer
aluminum grille
• Built-in 70V / 100V line
transformer
• 30W power handling
• 60W power handling
• 7W/15W/30W/8ohm power tap selector
• 12W/25W/50W/8ohm power tap selector
• Wall bracket with 120° horizontal/vertical rotation and integral
• Wall bracket with 120° horizontal/vertical rotation and integral
connections
connections
• Available in black and white color
• Available in black and white color
• Weather-proof IP55
• Weather-proof IP55
• For paging and background music in environments (shops,
• Ideal for applications requiring a full-range sound in a limited space:
restaurants, offices, etc.) requiring unobtrusive, small size speakers
able to provide a good SPL and a high-quality sound
bars, pubs, department stores and outdoor venues. Delivers an
extended response with deep lows and clean, well-defined highs
One-piece ABS cabinet for a better strength and acoustic rigidity
Aluminium weather-proof grille
Contemporary and stylish design
High-definition dome tweeter
High-efficiency woofer with polypropylene weatherproof cone
Crossover filter with selected components and high quality line transformers
Wall bracket with integral connections, 120° horizontal and vertical rotation and safety wire
Loudspeakers XENIA SERIES
X50CT
X50IWT
• Passive two-way coaxial ceiling loudspeaker system
• Passive two-way in-wall mount loudspeaker system
• 1/2” high-fidelity tweeter
• High-definition dome tweeter on elliptical waveguide
• 5” woofer
• 5” woofer with PP cone
• ABS cabinet
• ABS cabinet
• Built-in 100V line transformer
• Built-in 100V line transformer
• 20W power handling
• 40W power handling
• 2.5W/5W/10W power tap selector
• 8W/15W power tap selector
• Available in white color
• Available in white color
• For high-quality paging and background music diffusion
• Optional INWALL05P plastic box available for flush-mounting,
provides a quick and easy mounting system and a closed rear cabinet
for an improved sonic performance
• For top performance and high quality sound with a minimal visual
impact
INWALL05P
143 mm
Ø 170 mm
216 mm
HOLE DIE CUT
SQUARE DIE CUT
X30T
X50T
X80T
X50IWT
X50CT
5” woofer
8” woofer
1” neodymium soft dome tweeter
1/2” tweeter
5” woofer
5” woofer
nominal 15W
30W
max 30W
60W
50W
20 W
10W
100W
40 W
20W
Speakers
neodymium soft dome horn loaded
HF 1”
tweeter
LF 3” woofer
Power
Nominal impedance
8 ohm
8 ohm
8 ohm
-
-
Line input
70/100 V
70/100 V
70/100 V
100 V
100 V
Connections
Integral connections included in the
bracket (wire terminals)
Integral connections included in the
bracket (wire terminals)
2 x binding post
wire terminals
wire terminals
Controls
70/100 V voltage tap selector
8ohm - 8/15/30W power tap selector
70/100 V voltage tap selector
8ohm - 12/25/50W power tap selector
70/100 V voltage tap selector
8ohm - 25/50/100W power tap selector
8/15W power tap selector
2.5/5/10W power tap selector
Frequency response
(-10 dB)
100-20k Hz
80-20k Hz
75-20k Hz
85-20k Hz
95-20k Hz
SPL (1W/1m, 1 kHz)
87 dB
90 dB
91 dB
90 dB
91 dB
Dimensions (mm)
12.5x19.3x12
17x28x17.5
25x42x25
17x24x8
Ø 190 - H 8
Weight (kg)
1.3
2.3
4.6
1,7
1,3
Mounting Hole (mm)
-
-
-
143x216
Ø 170
Colour
black X30TB
white X30TW
black X50TB
white X50TW
black X80TB
white X80TW
-
-
70
Loudspeakers XENIA SERIES
AMP120XL
AUP240R
• Constant voltage output power amplifier
• Constant voltage output power amplifier
• 4 MIC/LINE inputs + 3 AUX inputs
• 1 MIC input + 1 LINE input + 1 TELEPHONE input
• Dual band tone control
• 2-band EQ
• Priority function on MIC 1
• 240W rated output power
• 120W rated output power
• 100V/70V/25V/16ohm/8ohm/4ohm output
• 100V/70V/50V/ 4 ohm output
• 24V emergency power supply
• 24V emergency power supply
• 19” rack mountable
• 19” rack mount kit included
TRL
ASO25
• Constant voltage (70V/100V) transformers
• 2-way stereo + mono low analog crossover
• Allow installation of constant voltage speakers in applications
• Designed to optimize the performance of systems combining
using constant voltage diffusion
• To be inserted between the amplifier outputs and the speaker line
• 19” rack mountable
• TRL150.4: four auto-transformers with 150 W input power each
• TRL300.2: two auto-transformers with 300 W input power each
• T2W1000: two auto-transformers with 1000 W input power each
sub-woofers and satellites
• Two inputs, two HIGH outputs, two LOW outputs, one MONO
LOW output
• 24dB/oct. Linkwitz-Riley crossover with internally selectable
frequency (80 Hz, 125 Hz, or 160 Hz)
• Subsonic filter, adjustable limiter, delay lines (0, 300 μs, 600 μs)
• 10 kHz “air” shelving tone control internally selectable
• Optional board for user-customized parametric filters
Loudspeakers XENIA SERIES
EIKON SERIES
EIKON is the new series of nearfield studio monitors designed by PROEL R&D team in order to provide to your music the most honest and accurate
reference possible.
From the carefully selected transducers to the proprietary enhanced waveguides and to the low-resonance cabinet design, everything has been
tailored with hours of listening in order to offer the best accuracy over the whole audio spectrum.
The perfectly optimized electronics, including high-headroom separate Class AB amplifiers for high and low section, high-precision crossover
networks and separate LIMITER circuits, provide maximum resolution and minimum listening fatigue.
The lineup includes three models, featuring 5.25”, 6” and 8” woofers, and a 10” subwoofer, offering the ideal nearfield monitor solution for any kind of
music production applications: recording studios, home and project studios, broadcast studios, post-production facilities, mobile production vehicles,
home theater, multimedia installations.
72
Loudspeakers EIKON SERIES
Soft-dome tweeter for detailed response and a high-resolution
sound, with clean and natural high frequencies
Proprietary integrated elliptical waveguide with accurate
directivity control, providing a wide and consistent ‘sweet
spot’ (optimal listening position)
Long-excursion woofer with lightweight fiber-glass composite
cone, featuring very extended response with well-defined bass
and accurate mids
Precisely calculated front tuning port
for greater low-frequency extension
Multiple audio input connectors (XLR, ¼”, RCA) for simple
connections to any kind of source
HF adjustment for a flexible control of high frequency response
according to personal taste or room characteristics
High-headroom Class AB amplifiers with dual accurate CLIP LIMITER,
guaranteeing a high-output, ultra-clean sound with no distortion
Sophisticated, carefully designed crossover filters for a smooth
response and an improved resolution
Loudspeakers EIKON SERIES
EIKON 5
NEW
EIKON 6
NEW
EIKON 8
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• Bi-amplified 2-way system
• 0.75” silk dome tweeter on constant
• 1” silk dome tweeter on constant
• 1” silk dome tweeter on constant
dispersion elliptical waveguide
• 5.25” woofer with fiberglass reinforced
cone
• 15 W continuous CLASS AB amplifier for
the high frequencies
• 30 W continuous CLASS AB amplifier for
the low frequencies
dispersion elliptical waveguide
• 6.5” woofer with fiberglass reinforced
cone
• 20 W continuous CLASS AB amplifier for
the high frequencies
• 50 W continuous CLASS AB amplifier for
the low frequencies
• SPL MAX 104 dB
• SPL MAX 106 dB
• Frequency response 55 Hz - 20 kHz
• Frequency response 50 Hz - 20 kHz
NEW
dispersion elliptical waveguide
• 8” woofer with fiberglass reinforced cone
• 20 W continuous CLASS AB amplifier for
the high frequencies
• 70 W continuous CLASS AB amplifier for
the low frequencies
• SPL MAX 109 dB
• Frequency response 45 Hz - 20 kHz
74
Loudspeakers EIKON SERIES
EIKON 10S
NEW
• Active vented sub-woofer
• 10” woofer with PP cone
• 150 W continuous CLASS AB power amplifier
• Stereo balanced 1/4” JACK and XLR-F inputs
• Stereo balanced XLR-M outputs plus balanced XLR-M link
• Optimized crossover design
• HI-CUT and LO-CUT frequency control
• VOLUME and PHASE control
• CLIP LIMITER
• SPL MAX 110 dB
• Frequency response 40 Hz - 150 Hz
• Laminated MDF cabinet with MDF front panel
EIKON 5
EIKON 6
EIKON 8
EIKON 10S
System type
2-way vented enclosure
2-way vented enclosure
2-way vented enclosure
Vented sub-woofer
High Frequency Device
0.75 “ dome tweeter on elliptical waveguide
1 “ dome tweeter on elliptical waveguide
1 “ dome tweeter on elliptical waveguide
Low Frequency Device
5.25” woofer with fiberglass reinforced cone
6.5” woofer with fiberglass reinforced cone
8” woofer with fiberglass reinforced cone
Angular Coverage
90° H x 60° V
90° H x 60° V
90° H x 60° V
HF Amplifier
Continuous Power
15W Class AB
20W Class AB
20W Class AB
LF Amplifier
Continuous Power
30W Class AB
50W Class AB
70W Class AB
150W Class AB
Processing
Analog
Analog
Analog
Analog
Frequency Response
55 Hz - 20 kHz
50 Hz - 20 kHz
45 Hz - 20 kHz
40 Hz - 150 Hz
Max SPL
104 dB
106 dB
109 dB
110 dB
Connectors
1/4” JACK, XLR-F, RCA
1/4” JACK, XLR-F, RCA
1/4” JACK, XLR-F, RCA
1/4” JACK, XLR-F (stereo INPUT), XLR-M (stereo
OUTPUT), XLR-M (LINK)
Controls
LEVEL, HF ADJUST
LEVEL, HF ADJUST
LEVEL, HF ADJUST
LEVEL, HI-CUT & LO-CUT frequency selector, PHASE
Construction
Vinyl laminated MDF cabinet with ABS front
Vinyl laminated MDF cabinet with ABS front
Vinyl laminated MDF cabinet with ABS front
Vinyl laminated MDF cabinet with MDF front
Cabinet Colour
Black
Black
Black
Black
Power Supply
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE
selector
Dimensions (W x H x D)
185 x 285 x 230 mm
225 x 320 x 270 mm
265 x 380 x 305 mm
330 x 365 x 365 mm
Weight
5 kg
8 kg
10 kg
15.3 kg
Loudspeakers EIKON SERIES
10” woofer with PP cone
the only tru
uth is music
(Jack Kerouac)
FREEPASS
FREEPASS6 is a combo sound system including a speaker, an amplifier and a 5-input mixer in an ultra-compact and portable package.
The 2-way speaker system includes a 1” neodymium tweeter and a 6.5” woofer, able to provide an extended and detailed frequency response.
The built-in amplifier delivers to the speakers 75W of RMS power. In addition, it can power an external speaker with another 75W thru the POWER
OUT connector.
The system includes a high-quality 5-input mixer featuring 2-band CHANNEL EQ, 3-band MAIN MIX EQ, MONITOR output and a sophisticated
DIGITAL EFFECT with 16 presets.
FREEPASS6 is hosted in a compact and rugged MDF cabinet finished with a durable anti-scratch black paint, which provides maximum portability
and road-proof operation. Two M4 threaded inserts on the bottom and on the side of the cabinet allow the included metal adapter to be used for
installing the system on a standard speaker stand, both in vertical and horizontal position.
FREEPASS6 is a cost-effective, ultra-compact, all-in-one system for mobile musicians, vocal P.A. and indoor sporting, religious or business
events. The 5 inputs available in the built-in mixer allows a variety of signals to be connected, while the possibility to double the power connecting a
second speaker allows the system to be used also in outdoor application where a higher SPL is required.
78
Portable Sound Systems FREEPASS
FREEPASS6
• All-in-one portable sound system
• 2-way speaker system with 1” neodymium tweeter and 6.5” woofer
for an accurate sound reproduction
• 150W peak power - 75W RMS built-in amplifier
• 75W RMS power output for an external speaker
• Built-in 5-input mixer with PHANTOM POWER
• 2 MONO MIC/LINE channels + 1 STEREO LINE channel with 2-band
EQ
• MONITOR output
• DIGITAL EFFECT PROCESSOR with 16 presets
• MAIN MIX 3-band EQ
• Compact MDF cabinet with durable black anti-scratch painting and
metal grille
• 4 x M4 threaded inserts for applying a speaker stand adapter
(included)
MIXER SECTION
MONO inputs
(3) MIC/LINE IN (COMBO)
STEREO inputs
(1) STEREO LINE IN (2xRCA)
Input EQ
PHANTOM power
Internal Effect
HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz
+ 48 V (CH 1-3)
ECHO (CH 1-4)
Outputs
16-PRESETS 24bit DIGITAL MULTIEFFECT
Main EQ
MONITOR OUT (1xJACK), REC OUT (2xRCA), SPEAKER OUT (1xJACK)
Metering
3-band EQ (HIGH, MID & LOW)
AMPLIFIER Section
Continuous Power
75 W (1 KHz, 1% THD)
Maxium Power
150 W (1 KHz, 1% THD)
Power Output
75 W @ 8 ohm
LOUDSPEAKER SECTION
Loudspeaker System
2-way system vented
High Frequency Device
1” neodymium tweeter
Low Frequency Device
6.5” woofer with 1”VC
Angular Coverage
Impedance
Frequency Response
SPL 1W 1m
90° H x 60° V
4 ohm
75 Hz - 20 kHz (-6 dB)
88 dB
Construction
MDF with black anti-scratch paint, metal grille
Pole Holder
4xM4 theraded inserts (bottom + side) for optional pole adapter
GENERAL SPECIFICATIONS
Dimensions
Weight
Power Supply
Power consumption
20x32x22 cm
6.2 kg / 13.67 lbs.
230/115 VAC (switchable) 50/60 Hz
180 W
Portable Sound Systems FREEPASS
FREEPASS
FREEPASS8USB and FREEPASS10USB are all-in-one sound systems
combining in an ultra-portable, easy-to-use package everything
musicians and other PA users need for playing: a full-featured mixer, a
versatile MP3 player, a powerful CLASS D amplifier, two full-range
speakers and high-quality connection cables.
FREEPASS8USB and FREEPASS10USB are complete PA systems that,
even if compact in size, quick to setup and simple to use, are packed with a
full set of features and delivers an unexpected sound quality for this
kind of systems. The 8-channel, 2x250W powered mixer fits perfectly
in one of the two speakers and it can be used as it is or detached with a
simple operation. The second speaker includes a convenient and large
compartment that can contain all the connection cables and other
accessories. Two high-quality PROEL speaker cables with ultradurable 1/4” metal jack connectors are also provided.
The two speakers, hosted in lightweight PP cabinets, feature a hornloaded 1.35” VC compression driver and a 8” or 10” woofer, able to
provide a clean and powerful full-range sound with high SPL. A large
handle on top of the cabinet and a pole holder on the bottom make
transport and installation quick and easy.
Thanks to their versatility and portability, FREEPASS8USB and
FREEPASS10USB can be used in a variety of applications, such has
live gigs for singers or small bands, education and sporting events,
seminars and presentations.
FREEPASS8USB
80
Portable Sound Systems FREEPASS
FREEPASS8USB
FREEPASS10USB
• All-in-one systems with two speakers and detachable power mixer
• 4 MIC/LINE MONO inputs with phantom power
• 2 LINE STEREO inputs
• 2-band channel EQ
• ECHO / DELAY effect
• MUSIC/SPEECH main EQ
• Built-in MP3 player with USB port
• 7-LED VU-METER
• 2-TRACK and MONITOR out
• Dual 250W CLASS D power amplifier with SMPS
• 2-way speakers with 1” horn-loaded compression driver and 8” or
10” woofer
• 2 x 7.5mt. PROEL power cables with metal ¼” JACK
• Convenient accessory compartment
FREEPASS8USB
FREEPASS10USB
MIXER SECTION
MONO inputs
(4) MIC IN (XLR-F) + LINE IN (JACK)
STEREO inputs
(2) LINE IN (2xJACK / 2xRCA)
Input EQ
HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz
PHANTOM power
+ 15 V (CH 1-4)
Internal Effect
ECHO (CH 1-4)
Outputs
MONITOR OUT (2xJACK), SUB OUT (1xJACK), SPEAKER OUT (2xJACK)
Main EQ
VOICE / MUSIC selector
Metering
2x6-LED VU-METER
MULTIMEDIA SECTION
Player Type
USB
Compatible File
Formats
MP3
Control Interface
Control buttons
AMPLIFIER SECTION
Amplifier Type
Class D with SMPS (Switch Mode Power Supply)
Maxium Output
Power
2 x 250 W @ 4 ohm (1 KHz, 1% THD)
Frequency
Response
MUSIC: 20 Hz - 20 KHz, VOICE: 80 Hz - 20 KHz
LOUDSPEAKER SECTION
Loudspeaker
System
2-way system vented
High Frequency
Device
1” compression driver 1.35" VC - horn loaded
Low Frequency
Device
8” woofer with 2" VC
Angular Coverage
10” woofer with 2”VC
90° H x 60° V
Impedance
4 ohm
Frequency
Response
65 Hz - 20 kHz (-10 dB)
SPL 1W 1m
95 dB
Construction
Black polypropylene, metal grille
Handles
1 top
Pole Holder
1 bottom
GENERAL SPECIFICATIONS
Dimensions
Speaker: 45x27.5x25 cm / Mixer: 32x18x9 cm
Speaker: 50x32x29 cm / Mixer: 32x18x9 cm
Weight
System: 20 kg / Speaker: 8.6 kg / Mixer: 2.4 kg
System: 25 kg / Speaker: 10.6 kg / Mixer:
2.4 kg
Power Supply
Power consumption
230 VAC / 120 VAC (switchable) 50/60 Hz
400 W
Portable Sound Systems FREEPASS
FREEPACK
FREEPACK are all-in-one, luggage-style sound systems combining
in an ultra-portable, easy-to-use package everything musicians
and other PA users need for playing: a full-featured mixer with digital
effect and MP3 player, a powerful CLASS D amplifier, two full-range
speakers and high-quality connection cables.
The three available FREEPACK models are complete PA systems that,
even if compact in size, quick to setup and simple to use, are packed with
a full set of features and deliver an unexpected sound quality for this
kind of systems. The fully featured powered mixer, including a MP3
player with BLUETOOTH connection, is coupled perfectly with the
two speakers in a stylish luggage-style package, making transport and
installation quick and easy. A convenient and large compartment on
the back of the mixer can contain all the connection cables and other
accessories. Two high-quality PROEL speaker cables with ultradurable 1/4” metal jack connectors are also provided.
The two speakers, hosted in lightweight PP cabinets, feature selected
transducers and carefully designed crossover filters, which can provide a
clean and defined sound together with an extended response and a
high sound pressure.
The brand new FREEPACK65LT includes in a very compact format two
rechargeable 12V batteries, able to provide up to 4-5 hours of mainsfree continuous operation.
Thanks to their versatility and portability, FREEPACK systems can be
used in a variety of applications, such has live gigs for singers or small
bands, education and sporting events, seminars and presentations.
82
Portable Sound Systems FREEPACK
FREEPACK812
FREEPACK65
• All-in-one luggage-style sound system with two speakers, power
• All-in-one luggage-style sound system with two speakers, power
mixer and media player
mixer and media player
• 6 MIC/LINE MONO inputs
• 7 MIC/LINE MONO inputs
• 2 LINE STEREO inputs
• 1 LINE STEREO input
• 2-band channel EQ
• 2-band channel EQ
• 16-preset DIGITAL MULTIEFFECT
• 16-preset DIGITAL MULTIEFFECT
• MP3 player with USB/SD slot, BLUETOOTH and LCD display
• MP3 player with USB/SD slot and LCD display
• 2x10-LED VU-METER
• 2x9-LED VU-METER
• AMP INSERTS and SUB OUT
• 2-TRACK and PRE-AMP out
• Dual 500W CLASS D power amplifier with SMPS
• Dual 250W CLASS D power amplifier with SMPS
• 2-way speakers with 1” horn-loaded compression driver and 8x12”
• 3-way speakers with 1” compression driver, 2x3” midrange and
elliptical woofer
2x6.5” woofer
• 2 x 7.5mt. PROEL power cables with metal ¼” JACK
• 2 x 7.5mt. PROEL power cables with metal ¼” JACK
• Convenient accessory compartment
• Convenient accessory compartment
Portable Sound Systems FREEPACK
FREEPACK65LT
NEW
• All-in-one luggage-style sound system with two speakers, power
mixer and media player
• 2 MIC/LINE MONO inputs
• 2 LINE STEREO inputs
• 2-band channel EQ
• 16-preset DIGITAL MULTIEFFECT
• MP3 player with USB/SD slot, BLUETOOTH and LCD display
• 1x4-LED VU-METER
• AUX and PRE-AMP outputs
• Dual 75W CLASS D power amplifier with SMPS
• 2-way speakers with 2x3” tweters and 1x6.5” woofer
• 2 x 7.5mt. PROEL power cables with metal ¼” JACK
• 2x12 rechargeable batteries
• Convenient accessory compartment
FREEPACK65LT
FREEPACK65
FREEPACK812
(2) MIC IN + LINE IN (XLR F + JACK))
(2) LINE IN (mini-jack + JACK / 2xRCA)
HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz
16 presets DIGITAL multieffect with 1 parameter
PRE-AMP OUT (2xJACK), REC OUT (2xRCA)
AUX OUT (JACK) SPEAKER OUT (2xJACK)
1x4-LED VU-METER
(7) MIC IN + LINE IN (COMBO)
(1) LINE IN (mini-jack / 2xRCA)
HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz
16 presets DIGITAL multieffect with 1 parameter
PRE-AMP OUT (2xJACK), REC OUT (2xRCA)
SPEAKER OUT (4xJACK MAIN + MON)
2x6-LED VU-METER
(6) MIC IN + LINE IN (COMBO)
(2) LINE IN (JACK or ST. JACK + 2xRCA)
HIGH: +/-12dB 10 kHz, LOW: +/- 12dB 100 Hz
16 presets DIGITAL multieffect with 1 parameter
PRE-AMP OUT (2xJACK), REC OUT (2xRCA)
SPEAKER OUT (4xJACK MAIN + MON)
2x10-LED VU-METER
USB / SD memory slot
USB / SD memory slot /BLUETOOTH
MP3 / WAVE
MP3
LCD display
LCD display
AMPLIFIER SECTION
Amplifier Type
Class D with SMPS (Switch Mode Power Supply)
Maxium Output Power 2 x 75 W @ 4 ohm (1 KHz, 1% THD)
Frequency Response
20 Hz - 20 KHz
Class D with SMPS (Switch Mode Power Supply)
2 x 250 W @ 4 ohm (1 KHz, 1% THD)
20 Hz - 20 KHz
Class D with SMPS (Switch Mode Power Supply)
2 x 500 W @ 4 ohm (1 KHz, 1% THD)
20 Hz - 20 KHz
LOUDSPEAKER SECTION
Loudspeaker System
2-way system vented
High Frequency Device 2 x 3” tweeter
Mid Frequency Device
Low Frequency Device 1x6.5” woofer with 1.35" VC
Angular Coverage
100° H x 80° V
Impedance
8 ohm
Frequency Response
90 Hz - 20 kHz (-10 dB)
SPL 1W 1m
92 dB
Construction
Black polypropylene, metal grille
Handles
1 top
Pole Holder
1 bottom
3-way system vented
1” dome tweeter 1" VC
2x3” midrange with 0.75" VC
2x6.5” woofer with 1.35" VC
100° H x 80° V
8 ohm
75 Hz - 20 kHz (-10 dB)
90 dB
Black polypropylene, metal grille
1 top
1 bottom
2-way system vented
1” horn-loaded compression driver
System: 73x21.5x55.5 cm / Speaker: 53.5x21.5x27.5 cm
Mixer: 73x21.5x36 cm
System: 22.5 kg / Speaker: 8 kg / Mixer: 6.5 kg
System: 81x24.5x61 cm / Speaker: 31.5x24.5x57.5 cm
Mixer: 41x24.5x61 cm
System: 28 kg / Speaker: 9 kg / Mixer: 10 kg
230 VAC / 120 VAC (switchable) 50/60 Hz
300 W
230 VAC / 120 VAC (switchable) 50/60 Hz
700 W
MIXER SECTION
MONO inputs
STEREO inputs
Input EQ
Internal Effect
Outputs
Metering
MULTIMEDIA SECTION
Player Type
USB / SD memory slot
Compatible File
MP3 / WAVE
Formats
Control Interface
LCD display
GENERAL SPECIFICATIONS
System: 62.5x26.4x49.5 cm / Speaker: ??x??x?? cm
Dimensions
Mixer: 73x21.5x36 cm
Weight
System: 17 kg / Speaker: ?? kg / Mixer: ?? kg
Recharge Battery
2 x 12V / 2.8A
Battery Recharging
Time
8x12” elliptical woofer
90° H x 60° V
8 ohm
50 Hz - 20 kHz (-10 dB)
96 dB
Black polypropylene, metal grille
1 top
1 bottom
7-9 hours
Battery Working Time 4-5 hours
Power Supply
230 VAC / 120 VAC (switchable) 50/60 Hz
Power consumption
300 W
84
Portable Sound Systems FREEPACK
FREE
PROEL FREE systems gives you the freedom to perform your music or play your sound anywhere without
worrying about where to plug the power cord, how to connect your MP3 player or how to set your
microphone.
FREE10LT, FREE8LT and FREE6LT are battery powered combo sound systems with a full set of
features and the sound you don’t expect from this kind of products. They include a versatile MP3 player
with USB port, SD slot and BLUETOOTH connection, featuring a large LCD and remote control.
FREE10LT and FREE6LT are hosted in compact and road-proof PP cabinets that provides maximum
portability and protection, while FREE8LT features a rugged MDF cabinet with black PVC finishing.
FREE10LT and FREE8LT include a built-in retractable handle and roller wheels, allowing the systems to
be taken everywhere. All models are fitted with an adapter for standard speaker stand.
With a horn-loaded compression driver coupled to a 10” woofer and a 120W power amplifier, FREE10LT
is an all-in-one multipurpose mobile system for indoor and outdoor applications requiring high quality
sound and advanced features. The WIRELESS module included provides a clean and hassle-free
wireless connection with the included handheld microphones for the maximum
freedom of movement. An additional wireless module, with the choice of
handheld (FREE10LTKITM) or bodypack transmitter with headset microphone
(FREE10LTKITH), is available as optional. The two rechargeable 12V batteries
provide up to 3-4 hours of mains-free continuous operation.
With his 2-way configuration featuring a high-efficiency 3” tweeter, FREE8LT is
the perfect combo system for mobile musicians, vocal P.A. and a wide range of
indoor or outdoor events. It provides maximum portability, quality sound and good
coverage in an extremely versatile and affordable package. The rechargeable
12V battery provides up to 2-3 hours of mains-free continuous operation.
The smallest model FREE6LT, with a powerful 80W amplifier, a 2-way configuration
with 6.5” woofer and horn-loaded compression driver and the built-in UHF wireless
microphone offers, in an extremely compact package, the best portability
combined with a surprisingly loud and well-defined sound. With its two Li-ion
12V rechargeable batteries it ensures 4.5 hours of mains-free operation.
Portable Sound Systems FREE
FREE8LT
FREE10LT
• All-in-one battery powered sound system
• All-in-one battery powered sound system
• Built-in MEDIA PLAYER with USB port, SD slot and BLUETOOTH audio
• License-free UHF PLL wireless module (863-865 MHz) with IR SYNC
connection, LCD display and IR remote control
• 2 MIC/LINE + 1 STEREO LINE inputs
• HIGH + LOW EQ controls
and handheld microphone
• Built-in MEDIA PLAYER with USB port, SD slot and BLUETOOTH audio
connection, LCD display and IR remote control
• Built-in EFFECT
• 2 MIC/LINE + 1 STEREO LINE inputs, 1 LINE output
• 20W RMS built-in amplifier
• HIGH + LOW EQ controls
• 3” tweeter and 8” woofer
• Built-in EFFECT
• 3/4 hours working time
• 120W built-in amplifier
• Compact MDF cabinet with durable PVC coating and ABS + STEEL
• 1” horn loaded compression driver and 10” woofer
protection corners.
• Adapter for standard speaker stand
• Two wheels, one retractable handle and one fixed handle for
maximum portability
• 3/4 hours working time
• Compact and light-weight PP cabinet for maximum portability,
with two wheels and one retractable handle, adapter for standard
speaker stand
• Compartment for two wireless microphones
86
Portable Sound Systems FREE
FREE6LT
NEW
• All-in-one battery powered sound system
• License-free UHF wireless module (863-865 MHz) with handheld
microphone
• Built-in MEDIA PLAYER with USB port, SD slot and BLUETOOTH audio
connection, LCD display and IR remote control
• 2 MIC/LINE + 1 STEREO LINE inputs, 1 LINE output
• TONE control
• 80W built-in amplifier
• 1” horn loaded compression driver and 6.5” woofer
• Li-ion batteries with 4-5 hours working time
• Compact and light-weight PP cabinet for maximum portability, with
one handle and adapter for standard speaker stand
FREE10LT
FREE8LT
FREE6LT
MIXER SECTION
MONO inputs
2 x MIC/LINE IN (COMBO)
1 x MIC IN (COMBO) + 1 x INST/MIC IN (JACK)
2 x MIC/LINE IN (COMBO)
STEREO inputs
1 x LINE IN (2xRCA + mini-jack)
1 x LINE IN (2xRCA + mini-jack)
1 x LINE IN (2xRCA + mini-jack)
ECHO
Internal Effect
ECHO
Outputs
MONO LINE OUT (JACK)
Main EQ
2-band EQ (HIGH + LOW)
MONO LINE OUT (JACK)
2-band EQ (HIGH + LOW)
TONE control
WIRELESS SECTION
Wireless Receiver
FR2R
FR3R
Handheld Transmitter
FR2H
FR3H
Bodypack Transmitter
FR2B (optional)
FR3B (optional)
Headset microphone
HS2 (optional)
HS2 (optional)
Modulation Mode
FM
FM
Frequency Range
UHF 863-865MHz
UHF 863-865MHz
Audio bandwidth
60 Hz - 16 KHz
60 Hz - 16 KHz
S/N ratio
>100dB
>100dB
HANDHELD RF output
10mW
10mW
BODYPACK RF output
10mW
10mW
THD
<1%
<1%
MULTIMEDIA SECTION
Player Type
USB / SD / BLUETOOTH player
USB / SD / BLUETOOTH player
USB / SD / BLUETOOTH player
Compatible File Formats
MP3
MP3
MP3
Control Interface
LCD display, REMOTE control
LCD display, REMOTE control
LCD display, REMOTE control
80W RMS (DC), 120W RMS (AC)
20W RMS
60W RMS (DC), 80W RMS (AC)
AMPLIFIER Section
Continuous Power
LOUDSPEAKER SECTION
Loudspeaker System
2-way system
2-way system
2-way system
High Frequency Device
1" horn loaded compression driver
3" tweeter
1" horn loaded compression driver
Low Frequency Device
10" woofer
8” woofer
6.5" woofer
Frequency Response
55Hz - 18KHz
65Hz - 15KHz, -3dB
80Hz - 18KHz
Construction
Polypropylene cabinet, metal grille, 2 wheels
MDF with black PVC finishing, 2 wheels
Polypropylene cabinet, metal grille
Handles
1 rear retractable
1 top, 1 rear retractable
1 top
Pole Holder
1 bottom
1 bottom
1 bottom
GENERAL SPECIFICATIONS
Dimensions
36x56x31 cm
46.5x51x37.5 cm
29.5x47x26 cm
Weight
19 kg / 41.9 lbs
12 kg / 26.45 lbs
6. kg / 13.20 lbs
Recharge Battery
2 x 12V / 5A
1 x 12V / 5A
2 x 12V / 1.5A Li-ion
Battery Recharging Time
10-12 hours
7-10 hours
7-9 hours
Battery Working Time
3-4 hours
2-3 hours
4-5 hours
Power Supply
230/115 VAC (switchable) 50/60 Hz
230/115 VAC (switchable) 50/60 Hz
240-100 VAC 50/60 Hz
Portable Sound Systems FREE
ALPHABETICAL INDEX
CODE
PAGE
CODE
PAGE
CODE
PAGE
AMP120XL
71
HPAMP104
29
MLX3642
19
ASO25
71
HPAMP106
29
PC260
33
AUP240R
71
HPD2004
39
PHANTOM100
28
CMMLX2842
21
HPD4004
39
PSU100
30
CMMLX3642
21
HPX1200
37
SDC670PRO
17
COVER5X
67
HPX2400
37
SNBK
53
COVER6X
67
HPX2800
37
SNBK
67
COVERFL12
53
HPX4600
37
SNWH
53
COVERFL15
53
HPX6000
37
SNWH
67
COVERFL8
53
HPX8000
37
SPLIT100
28
COVERV10
47
HPX900
37
SW110AV2
63
COVERV12
47
KPTFL12
53
SW115AV2
62
COVERV15
47
KPTFL15
53
SW115HAV2
61
COVERV8
47
KPTFL5
53
SW118A
62
CPWD10
65
KPTFL5W
53
SW118HAV2
61
CPWD12
65
KPTFL8
53
TRL
71
CPWD15
65
KPTLT10
59
TUBE1000USB
30
DB1A
25
KPTLT12
59
USBLL02
21
DB1P
25
KPTLT6
59
V10A
45
DB2A
25
KPTLT8
59
V12A
46
DIRECT100A
27
KPTLTP
59
V12HDA
49
DIRECT100P
27
KPTNX04
V15A
46
DPX1000
35
KPTSP01BK
67
V15HDA
49
DPX1500
35
KPTSP01WH
67
V8A
45
DPX2000
35
KPTV10
47
WAVE10A
43
EIKON 10S
75
KPTV12
47
WAVE10P
43
EIKON 5
74
KPTV15
47
WAVE12A
43
EIKON 6
74
KPTV8
47
WAVE12P
43
EIKON 8
74
LT10A
56
WAVE15A
43
FLASH12AV2
51
LT10P
56
WAVE15P
43
FLASH12HDA
52
LT12A
56
WD10A
65
FLASH12PV2
51
LT12P
56
WD12A
65
FLASH15HDA
52
LT15A
57
WD15A
65
FLASH15AV2
51
LT215A
57
X30T
69
FLASH5AV2
51
LT6A
55
X50CT
70
FLASH5PV2
51
LT6P
55
X50IWT
70
FLASH8AV2
51
LT812A
58
X50T
69
FLASH8PV2
51
LT8A
55
XE35T
66
FREE10LT
86
LT8P
55
XE51CT
67
FREE6LT
87
M1622USB
16
XE55CTX
67
FREE8LT
86
M602FX
14
XE55T
66
FREEPACK65
83
M822USB
15
XE65CT
67
FREEPACK65LT
84
Mi10
9
XE65CTX
67
FREEPACK812
83
Mi12
10
XE65T
66
FREEPASS10USB
81
Mi16
11
FREEPASS6
79
Mi5
7
FREEPASS8USB
81
Mi6
8
GF29
17
MLX2842
19
47/53/59
SSCAT15IE
88
Alphabetical INDEX
NOTE
NOTE
NOTE
• Tutte le specifiche possono essere variate senza alcuna notifica • Design and specifications subject to change without any notice
• E’ vietata la riproduzione fotostatica e fotografica del presente catalogo, o di parti di esso, in mancanza di espressa autorizzazione da parte di Proel S.p.a.
• The photostatic and photograhic reproduction of this catalogue, in whole or in part, is strictly prohibited without the prior written consent of Proel S.p.A
90
NOTE
PROEL
International Ltd.
London
Uk
PROEL
Korea Co. Ltd.
Gyunggi-Do
KOREA
PROEL
Malaysia Snd. Bhd.
Petaling Jaya
MALAYSIA
PROEL SPA
(Worldwide Headquarters)
Via alla Ruenia, 37/43
64027 Sant’Omero (TE) - ITALY
Tel. +39 0861 81241
Fax +39 0861 887862
P.I. 00778590679
N.Reg.AEE IT 08020000002762
[email protected]
www.proel.com
www.facebook.com/proel
www.youtube.com/proelgroup

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project