Cisco 4G LTE WWAN EHWIC - Verizon Datasheet

Data Sheet
Cisco Fourth-Generation LTE Wireless WAN
Enhanced High-Speed WAN Interface Cards
The Cisco® Fourth-Generation (4G) Long-Term Evolution (LTE) Wireless WAN
(WWAN) Enhanced High-Speed WAN Interface Cards (EHWICs) for Cisco Integrated
Services Routers Generation 2 (ISR G2) provide the next generation of wireless WAN
backup solutions.
Product Overview
The Cisco 4G LTE WWAN EHWICs (Figure 1) are the first enterprise-class 4G multimode LTE WWAN solution.
With 4G LTE, WWAN is a primary WAN link solution. Businesses can now run applications such as interactive
video and telepresence on a primary 4G LTE WWAN link, which is 10 to 15 times faster and has 5 times lower
latency than 3G links. These cards support the latest Third-Generation Partnership Project (3GPP) Release 8 LTE
standards. Cisco 4G multimode LTE WWAN EHWICs provides persistent, reliable LTE connectivity with fallback
and transparent handoff to earlier technologies. The card provides bandwidth to support high-definition (HD) and
peer-to-peer (P2P) video calls, providing customers with an excellent mobile broadband experience.
The Cisco 4G LTE WWAN EHWICs are tightly integrated with the services provided on the award-winning Cisco
ISR G2 devices, which deliver secure data, voice, video, and mobility services. The Cisco 4G LTE WWAN
EHWICs are supported on the modular Cisco 1900, 2900, and 3900 Series ISR G2 devices.
Enterprises are looking for ways to reduce deployment time, enable comprehensive media services, increase
revenue, and improve business continuity. The Cisco 4G LTE WWAN EHWICs, when coupled with a service
provider’s wireless data plan, provide a rapidly deployable, high-bandwidth, reliable, and secure solution for
branch offices and remote sites. With 4G LTE data rates, the Cisco 4G LTE WWAN EHWICs offer a primary WAN
link solution capable of running comprehensive branch-office services, including voice and video services.
The Cisco 4G LTE WWAN EHWICs include the following variants:
●
EHWIC-4G-LTE-V: Dedicated multimode LTE for Verizon Wireless networks; the multimode LTE EHWIC is
backward compatible with Evolved High Rate Packet Data (EHRPD), EVDO Revisions A and 0, and 1xRTT
●
EHWIC-4G-LTE-A, EHWIC-4G-LTE-BE*, EHWIC-4G-LTE-JP*: Multimode LTE for AT&T US, Bell Canada
and NTT Docomo Japan that operates LTE on 1700- and 2100-MHz, 700-MHz, or 2100-MHz networks;
multimode LTE EHWIC is backward compatible with DC-HSPA, HSPA+, HSPA, UMTS, EDGE, and GPRS.
●
EHWIC-4G-LTE-G: Multimode LTE for carriers that operates LTE on 800-MHz, 900-MHz, 1800-MHz, 2100MHz, or 2600-MHz networks; the multimode LTE global EHWIC is backward compatible with DC-HSPA,
HSPA+, HSPA, UMTS, EDGE, and GPRS.
*First customer shipment (FCS) in late Q3CY2013
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 1 of 12
Figure 1.
Cisco 4G LTE WWAN EHWIC for Cisco ISR G2
With enhanced data rates and improved latency, WWAN services are an ideal way to replace or supplement
traditional wire-line services. 4G LTE WWAN data services offered today have theoretical limits of 100 Mbps on
the downlink and 50 Mbps on the uplink. The actual data speed depends on the service provider’s network. 4G
LTE WWAN data services are an alternative in areas in which broadband services either are not available or are
very expensive. Cisco is building on these performance milestones and adding support for wireless to our wide
variety of WAN interface alternatives.
Main Business Benefits
Primary connectivity: The Cisco 4G multimode LTE WWAN EHWIC provides persistent, reliable LTE
connectivity with fallback and transparent handoff to earlier technologies. It enables high-performance, secure,
reliable, and transparent multimedia applications anywhere and anytime and allows customers to deploy and
manage the same device for multiple applications, simplifying deployment and management. For businesses
requiring rapid setup or temporary connectivity, 4G LTE WWAN offers the capability to deploy a new site quickly.
Using the integrated services available on the Cisco ISRs, Cisco 4G LTE WWAN EHWICs can provide instant and
mobile communications during disasters and service outages.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 2 of 12
Figure 2.
Cisco 4G LTE WWAN EHWIC for WAN
Figure 3.
4G LTE as a primary WAN link
WAN Backup: Resilient WAN access is a crucial requirement for branch offices connecting to a corporate site or
the Internet. Although DSL, Frame Relay, ISDN, and dialup are common choices for backup if a primary WAN link
fails, a nonterrestrial data path such as a 4G LTE WWAN provides enhanced WAN diversity (Figure 2). Cisco 4G
LTE WWAN EHWICs combined with the Cisco integrated services routers offer the capability to automatically
initiate connection over the 4G LTE WWAN when the primary WAN link is unavailable. In addition, you can use
Cisco 4G LTE WWAN EHWICs to provide supplemental bandwidth when the primary WAN link is overloaded.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 3 of 12
Figure 4.
4G LTE as a backup WAN link
Main Features and Benefits
●
Integrated 4G LTE WWAN broadband: With the 4G LTE WWAN modem integrated into the router, you
gain the benefits of simplified installation and management. In addition, the Cisco 4G LTE WWAN EHWICs
®
are tightly integrated with Cisco ISRs, which run the industry-leading Cisco IOS Software, giving access to
all the advanced features of Cisco IOS Software such as quality of service (QoS), intelligent network
queuing, and robust security.
●
Performance: With increasing data use and the proliferation of web-based applications at remote sites,
there is an increasing need for high-speed (broadband) data connections to run mission-critical
applications at these sites. 4G LTE WWAN services promise low-latency links at high speeds.
●
Short installation time: Businesses sometimes have to wait weeks or months to get data circuits installed
at new locations. For temporary or seasonal sites, wireless data services allow instant connectivity
anywhere there is cellular coverage, and rapid deployment allows you to quickly set up networks with
WAN connectivity.
●
Network resiliency through WAN diversity: WAN connectivity is crucial to the functioning of your
business, and any downtime means a loss of productivity and lost opportunity. Staying connected and
operational during a network outage can be vital. A wireless connection for backup to a remote site
provides protection against line outages and an additional level of redundancy because the 4G LTE
WWAN infrastructure is often served by separate facilities, providing redundancy for the entire local loop.
●
Portability: You can easily relocate wireless routers and Cisco 4G LTE WWAN EHWICs wherever
coverage is available.
●
Hardware-ready 4G LTE multiple bearer QoS: Future alignment with 4G LTE multiple-bearer QoS
is supported. The QoS feature is service provider specific, and its support aligns with the service
provider’s roadmap.
●
WAAS Express*: Cisco WAN optimization system consists of WAAS Express (WE) routers and Wide-area
Application Engines (WAEs) that work together to optimize TCP traffic in your network. When client and
server applications attempt to communicate with each other, the network intercepts the traffic and acts on
behalf of the client application and the destination server.
*WAAS Express will be supported in late Q4CY2013
Product Specifications
Table 1 provides specifications for the Cisco 4G LTE WWAN EHWICs, and Table 2 provides antenna
specifications.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 4 of 12
Table 1.
Specifications for the Cisco 4G LTE WWAN EHWICs Among Region Theaters
Region Theaters
EHWIC-4G-LTE-V
EHWIC-4G-LTE-A
EHWIC-4G-LTE-G
EHWIC-4G-LTE-BE
EHWIC-4G-LTE-JP
Bands
LTE band 13 (700
MHz)
LTE band 17 (700
MHz)
LTE band 1, 3, 7, 8, 20
(800(B20), 900(B8),
1800(B3), 2100(B1),
2600(B7) MHz)
LTE AWS band 4
(1700/2100 MHz)
LTE band 1 (2100 MHz)
DL/UP Speeds
50 Mbps/25 Mbps
100 Mbps/50 Mbps
100 Mbps/50 Mbps
100 Mbps/50 Mbps
100 Mbps/50 Mbps
Europe
X
X
X
X
United States
Verizon Wireless
AT&T Wireless
X
X
X
Canada
X
X
X
Bell Canada
X
Japan
X
X
X
X
NTT Docomo
Item
External Interfaces
Specification
● RJ-45 interface for use with diagnostics and monitoring tools
● Two TNC connectors with main and diversity RF port for antenna connection
● Separate active GPS with SMA (support with later Cisco IOS Software release)
● Support for main and diversity antenna connector
Form Factor
Single-wide EHWIC for Cisco ISR G2 platforms
Physical Dimensions (H x W x D)
0.75 x 3.08 x 4.9 in. (1.9 x 7.8 x 12.4 cm)
Weight
5.2 oz (147 grams)
Subscriber Identity Module (SIM) Card
4G LTE SIM card socket (USIM or mini-SIM)
Power
10.6 W peak (5.1 W typical)
Supported Platforms
Modular Cisco 1900, 2900, and 3900 Series ISR G2
Software Compatibility
Modular Cisco 1900, 2900, and 3900 Series ISRs supported with Cisco IOS Software release:
● Cisco IOS Software feature set: Universal Cisco IOS Software image
● EHWIC-4G-LTE-V, EHWIC-4G-LTE-A and EHWIC-4G-LTE-G: Mainline Cisco IOS Software
Release 15.2(4)M3 with Modem Firmware 3.5.x or later IOS Release with respective Modem
Firmware
● EHWIC-4G-LTE-BE, EHWIC-4G-LTE-JP: Mainline Cisco IOS Software Release 15.3(3)M with
Modem Firmware 3.5.x or later IOS Release with respective Modem Firmware
Main Features Include
● Autoswitch failover between primary and backup links
● Multichannel-interface-processor (MIP) profile configuration
● 3G Simple Network Management Protocol Version 2 (SNMPv2) MIBs and traps
● Remotely initiated data callback using voice
● Remotely initiated data callback using SMS
● Remote firmware upgrade over 4G LTE
● Virtual diagnostic monitoring
● SIM lock and unlock capability
● Mobile routing: Enterprise Dynamic Mobile Network Routing (DMNR) based on Cisco Network
Mobility (NEMO)
● Receive diversity: For all supported bands, multiple-input and multiple-output (MIMO) on LTE
● Density: Maximum EHWIC slots
SMS/GPS/Multiple Profile*
● GPS antenna: SMA connector
● Send and receive SMS (maximum 160 characters)
● Standalone GPS
● Separate active GPS with SMA
● Configure multiple profile
MIBs*
● 3G MIB
● Entity MIB
● IF MIB
● 3G WWAN MIB persistence
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 5 of 12
Item
Specification
● Enhanced 3G MIB for 4G MIB extension
Network Management and Diagnostics
● In-band and out-of-band management using Telnet (Cisco IOS Software command-line interface
[CLI]) and SNMP, including MIB II and other extensions
● Industry-standard 4G LTE diagnostics and monitoring tools (QUALCOMM CDMA Air Interface
Tester [CAIT] and Spirent Universal Diagnostic Monitor [UDM]
Modem Information
● Modem form factor: Embedded Peripheral Component Interconnect (PCI) minicard
● EHWIC-4G-LTE-V: Sierra Wireless MC7750
● EHWIC-4G-LTE-A: EHWIC-4G-LTE-BE, EHWIC-4G-LTE-JP: Sierra Wireless MC7700
● EHWIC-4G-LTE-G: Sierra Wireless MC7710
Carrier Support
For an updated list of carriers that offer services with Cisco 4G LTE WWAN EHWIC, please visit
http://www.cisco.com/go/4g.
Diagnostic
RSVD micro-USB port
Update
OTA-DM
Programming Interfaces
Cisco IOS Software CLI
Wireless Technologies Supported
EHWIC-4G-LTE-V
● LTE band 13 (700 MHz)
Backward compatibility:
◦
CMDA2 800 and 1900 MHz
◦
UMTS WCDMA, HSDPA, HSUPA, and
HSPA+ 850, 900, 1900, and 2100 MHz
◦
GSM and GPRS
◦
EDGE 850, 900, and 1800 MHz
EHWIC-4G-LTE-G
● LTE band 1, 3, 7, 8, 20 (800(B20), 900(B8),
1800(B3), 2100(B1), 2600(B7) MHz)
Backward compatibility:
● UMTS and HSPA+: 900 and 2100 MHz
● DC-HSPA+, Tri-band EDGE, GPRS, and
GSM
EHWIC-4G-LTE-A, EHWIC-4G-LTE-BE,
EHWIC-4G-LTE-JP
◦
LTE: AT&T: 700 MHz (B17)
◦
LTE: Bell Canada 1700/2100 MHz AWS
band 4
◦
LTE: NTT Docomo Japan 2100 MHz
band 1
Backward compatibility:
LED indicators
◦
UMTS and HSPA+: 850, 1900, and 2100
MHz
◦
Quad-band EDGE, GPRS, and GSM
EHWIC-4G-LTE-V
● WWAN LED (connection status indication)
EHWIC-4G-LTE-G
● WWAN LED (connection status indication)
● RSSI
● EVDO
● RSSI
● HSPA+
● GPS
● LTE
● GPS
● LTE
EHWIC-4G-LTE-A, EHWIC-4G-LTE-BE,
EHWIC-4G-LTE-JP
● WWAN LED (connection status indication)
● RSSI
● HSPA+
● GPS
● LTE
Approvals and Compliance
Safety
● UL 60950-1,CAN/CSA-C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, AS/NZS 60950.1, FCC
Part 2.1093, RSS-102, and EN 50385
EMC
● FCC Part 15, Industry Canada ICES-003, EN 301 489-01, EN 301 489-07, EN 301 489-24,
EN55022 (CISPR22), EN55024 (CISPR24), EN300-386, EN 61000-3-2, EN 61000-3-3, AS/NZS
CISPR 22, CNS13438, and VCCI V-3
Radio
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 6 of 12
Item
Specification
● FCC Part 2, FCC Part 22, FCC Part 24, RSS 129 and RSS 133, RSS 132 and RSS 133, EN 301
511 GSM, EN 301 908-1, and EN 301 908-2
● PTCRB-approved. device ID Cisco EHWIC-4G-LTE-A
* Support with future IOS release FCS Q3CY2013
Table 2.
Antenna Specifications
Item
Diversity (Dual Antenna)
Antenna 4G-ANTM-OM-CM
Specification
● EHWIC-4G-LTE-V, EHWIC-4G-LTE-A, EHWIC-4G-LTE-G, EHWIC-4G-LTE-BE & EHWIC-4GLTE-JP
Description
● Multiband indoor omnidirectional antenna
● Ceiling mount
Electrical Specifications
● Frequency range: 698 to 960 MHz, 1575 MHz and 1710 to 2690 MHz
● Gain: 1 and 1.5 decibels relative to isotropic (dBi) (700 to 960 MHz), 1.7 and 3.2 dBi (1700 to
2200 MHz), 3 and 4 dBi (2500 to 2700 MHz)
● Maximum power: 50W
● Connector: TNC male
● VSWR: 2.0:1 and 3.01:1 or less for GPS
● Nominal impedance: 50 ohms
● Polarization: Linear Vertical
Mechanical Specifications
● Radome material: White ABS
● Dimensions (outside dimensions [OD] x height [H]): 5.64 OD in. x 2.0 H in.
● Weight: 6.0 oz
● Temperature rating: -40 to 85°C [[PLS FIRST GIVE FAHRENHEIT TEMPERATUR E]]
● Can be used with the following cable extensions: 3G-CAB-ULL-20 and 3G-CAB-ULL-50
Antenna 4G- LTE-ANTM-D
Description
● Cisco 4G and 3G omnidirectional dipole antenna
● Articulating joint; can be rotated 360 degrees and is capable of maneuvering into three stop
positions: 0 degrees, 45 degrees, and 90 degrees
● Plug threaded TNC connector: Directly mount the antenna on any Cisco 4G or Cisco 3G wireless
ISR EHWIC with a TNC connector; the threads on the connector must comply with the ANSI
7/16-28 UNEF 2B thread specification
● Multiband swivel-mount dipole antenna
● Faceplate mount (single unit included with all Cisco 4G WWAN EHWICs)
Electrical Specifications
● Operating frequency ranges: 698 to 806 MHz, 824 to 894 MHz, 925 to 960 MHz, 1710 to 1885
MHz, 1920 to 1980 MHz, 2110 to 2170 MHz, and 2500 to 2690 MHz
● Maximum peak gain: 2 dBi
● Maximum input power: 3W
● Connector: TNC plug
● Voltage standing wave ratio (VSWR): < 2.5:1 or less
● Characteristic impedance: 50 ohms
Mechanical Specifications
● Antenna dimensions (L x W x D): 9 x 1.2 x 7/16 in. (229 x 30.5 x 11 mm)
● Temperature rating: –22 to 158°F (–30 to 70°C)
● Antenna base and random color: Cisco Raven Black
Antenna extension 4G-AE015-R
Description
● Single-unit antenna extension base (15 ft (457.2 cm))
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 7 of 12
Item
Specification
Electrical Specifications
● Frequency range: 6 GHz
● Attenuation: Less than 3 dB at or below 2.5 GHz
● Base connector: TNC socket
● Pigtail connector: TNC plug
Mechanical Specifications
● Base material: Cisco gray UL94 V0 PC/ABS plastic
● Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
● Weight: 6 oz (0.17 kg)
● Cable: 15 ft (457.2 cm) nonplenum rated Pro-Flex Plus 195
Antenna extension 4G-AE010-R
Description
● Single-unit antenna extension base (10 ft (304.8 cm) cable included)
Electrical Specifications
● Frequency range: 6 GHz
● Attenuation: Less than 3 dB at or below 2.5 GHz
● Base connector: TNC socket
● Pigtail connector: TNC plug
Mechanical Specifications
● Base material: UL 94 V0PC and ABS plastic
● Dimensions: 2.8 x 2.4 x 1.8 in. (7.1 x 6.1 x 4.6 cm)
● Weight: 6 oz (0.17 kg)
● Cable: 10 ft (304.8 cm) nonplenum rated Pro-Flex Plus 195
ANT-4G-OMNI-OUT-N*
Description: Cisco outdoor omnidirectional antenna for 2G, 3G, and 4G cellular
● UV-stable radome
● Mast-mounting bracket
● Applicable for both 2G and 3G solutions
● Domestic LTE 700 band and global LTE 2600 band
● Domestic cellular and global GSM
● WiMAX 2300 and 2500
Electrical Specifications
● Frequency ranges: 698 to 960 MHz, 1710 to 2170 MHz, and 2300 to 2700 MHz
● Nominal gain (dBi): 698 to 960 MHz = 1.5 dBi, and 1710 to 2700 MHz = 3.5 dBi
● 3 dB beam width (E plane): 698 to 960 MHz = 81 degrees, 1710 to 2170 MHz = 75 degrees,
and 2300 to 2700 MHz = 100 degrees
● 3 dB beam width (H plane): 360 degrees, omnidirectional
● Polarization: Vertical and linear
● Normal impedance: 50 ohms
● VSWR: < 2.5:1 (698 to 960 MHz) and < 2.0:1 (1710 to 2690 MHz)
● Radiation pattern: Omnidirectional
Mechanical Specifications
● Mount style: Mast mount, upright position only
● Environment: Outdoor
● Connector: N-type socket
● Antenna length (height): 9.8 x 1 in. (24.9 x 2.45 cm)
● Weight: 1.5 lb (.68 kg)
● Dimensions (H x OD): 9.8 x 1 in. (248 x 24.5 mm)
● Operating temperature range: –22 to 158°F (30 to 70°C)
● Storage temperature: –40 to 185°F (–40 to 85°C)
● Maximum power: 20W
● Radome: Polycarbonate, UV, white
● Material substance compliance: ROHS compliant
ANT-4G-SR-OUT-TNC
Description: Cisco integrated 4G low-profile outdoor saucer antenna
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 8 of 12
Item
Specification
● Applicable for both 3G and 4G solutions
● Domestic LTE 700 band and global LTE 2600 band
● Domestic cellular and global GSM
● Weatherproof UV stable radome
● Performance optimized
● Excellent flame rating
Electrical Specifications
● Frequency ranges: 698 to 960 MHz and 1710 to 2700 MHz
● Peak gain with 1-ft cable: 1.5 dBi (698 to 960 MHz) and 3.7 dBi (1710 to 2700 MHz)
● Peak gain with 15-ft cable: 0.8 dBi (698 to 960 MHz) and 0.2 dBi (1710 to 2700 MHz)
● Average efficiency with 1-ft cable: 90% (698 to 960 MHz) and 82% (1710 to 2700 MHz)
● Average efficiency with 15-ft cable: 60% (698 to 960 MHz) and 40% (1710 to 2700 MHz)
● Polarization: Linear and vertical
● Nominal impedance: 50 ohms
● VSWR (maximum): 2.0:1 (698 to 960 MHz) and 2.0:1 (1710 to 2700 MHz)
● H-plane (3 dB beam width): Omnidirectional
Mechanical Specifications
● Power: 3W
● Cable: 15-ft LMR 195
● RF connector: Type N (f); TNC (plug) available
● Mount style: Ceiling mount
● Radome: PC/ABS, UV stable, black
● Material substance compliance: RoHS compliant
● Operational temperature: –22 to 158°F (–30 to 70°C)
● Storage temperature: –40 to 185°F (–40 to 85°C)
● Environment: Indoor
● Dimensions (H x OD): 3.4 x 7.9 in, (87 x 200 mm)
ANT-4G-PNL-OUT-N*
Description: Cisco multiband panel outdoor 4G antenna
● Supports 3G and 4G solutions
● Supports bands
● Wall mount and mast mount
● Indoor and outdoor
● Dual type-N socket connector
Electrical Specifications
● Frequency ranges: 698 to 960 MHz and 1710 to 2700 MHz
● VSWR: 2.0:1 maximum
● Gain: 5.5 to 10.5 dBi (698 to 960 MHz) and 6.5 to 9.0 dBi (1710 to 2700 MHz)
● 3 dB beam width (vertical plane): 55 to 70 degrees = 698 to 960 MHz, 53 to 98 degrees = 1710
to 2200 MHz, 60 to 70 degrees = 2200 to 2500 MHz, and 55 to 70 degrees = 2500 to 2700 MHz
● 3 dB beam width (horizontal plane): 55 to 70 degrees = 698 to 960 MHz and 50 to 90 degrees
= 1710 to 2200 MHz
● F/B ratio: > 15 dB, typical 20 dB = 698 to 960 MHz, and > 17 dB, typical 23 dB = 1700 to
2700 MHz
● Isolation: > 30 dB
● Polarization: Slant +/– 45 degrees
● Nominal impedance: 50 ohms
● Radiation pattern: Directional
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 9 of 12
Item
Specification
Mechanical Specifications
● Mount style: Wall or mast mount
● Environment: Outdoor
● Connector: Dual type-N socket (direct connect or dual 12 in. (30 cm))
● Antenna length (height): 11.6 in. (2.95 cm)
● Temperature range (operating): –22 to 158°F (–30 to 70°C)
● Storage temperature: –40 to 85°C
● Wind rating: 160 km per hr
● IP rating: IP 54
● Radome: Polycarbonate, UV resistant, white
● Material substance compliance: ROHS compliant
CGR-LA-NM-NF*
CGR-LA-NF-NF*
Description: Cisco Lightning Arrestor
● Broadband operation
● DC continuity for outdoor powering
● Reversed installation
● Permanently installed gas capsule
● CGR-LA-NM-NF: male to female connector
● CGR-LA-NF-NF: female to female connector
Feature Description
● Arrestor Type: Gas discharge tube
● Main path connectors: Port 1: protected, N plug (male), Port 2: unprotected, N jack (female,
bulkhead side)
● Impedance: 50 ohms
● Frequency range: 0 MHz to 5800 MHz
● Return loss: Greater than or equal to 20 dB
● Insertion loss: Less than or equal to 0.2 dB
● RF CW power: Less than or equal to 60 W
● Surge current handling capability: 10 single, multiple kA (test pulse 8/20 ms)
● Residual pulse energy: 250 microsecond typically (test pulse 4 kV 1.2/50 microsecond; 2kA 8/20
microsecond), main path (protected side)
● Operating temperature range: -40-degrees F to 185-degrees F (-40-degrees C to 85-degrees C)
● Waterproof rating: IP 67 (according to IEC 60529, data refer to the coupled state)
● Mounting and grounding: MH24 (bulkhead)
● Material
◦
Housing: brass
◦
Port 1 center contact: gold-plated brass
◦
Port 2 center contract copper beryllium alley
* –N antenna works with –N cables and –N lighting arrestor
Ordering Information
To place an order, refer to Tables 3 through 5 and visit the Cisco Ordering Home Page.
Table 3.
Cisco 4G LTE WWAN EHWIC Ordering Information
Description
Part Number
4G LTE EHWIC for Verizon, 700 MHz Band 13 / CDMA Rev A
EHWIC-4G-LTE-V
EHWIC-4G-LTE-V= (Spare)
4G LTE EHWIC for AT&T, 700 MHz Band 17, 850/1900/2100 MHz UMTS/HSPA bands
EHWIC-4G-LTE-A
EHWIC-4G-LTE-A= (Spare)
4G LTE EHWIC for Europe, LTE 800/900/1800/ 2100/2600 MHz, 900/1900/2100 MHz UMTS/HSPA bands
EHWIC-4G-LTE-G
EHWIC-4G-LTE-G= (Spare)
4G LTE EHWIC for Bell Canada, 1700/2100 MHz AWS band 4, 850/1900/2100 MHz UMTS/HSPA bands
EHWIC-4G-LTE-BE
EHWIC-4G-LTE-BE= (Spare)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 10 of 12
4G LTE EHWIC for NTT Docomo Japan, 2100 MHz band 1, 850/1900/2100 MHz UMTS/HSPA bands
EHWIC-4G-LTE-JP
EHWIC-4G-LTE-JP= (Spare)
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 11 of 12
Table 4.
Antenna Ordering Information
Description
Part Number
Multi-Band Swivel Mount Dipole Antenna-Faceplate Mount
4G-LTE-ANTM-D
4G-LTE-ANTM-D= (Spare)
Multi-Band Omnidirectional Antenna-Ceiling Mount
4G-ANTM-OM-CM
4G-ANTM-OM-CM= (Spare)
Single Unit Antenna Extension Base (10-ft cable included)
4G-AE010-R
4G-AE010-R= (Spare)
Single Unit Antenna Extension Base (15-ft cable)
4G-AE015-R
4G-AE015-R= (Spare)
50-ft (15m) Ultra Low Loss LMR 400 Cable with TNC Connector
4G-CAB-ULL-50
4G-CAB-ULL-50= (Spare)
20-ft (6m) Ultra Low Loss LMR 400 Cable with TNC Connector
4G-CAB-ULL-20
4G-CAB-ULL-20= (Spare)
25-ft (7.5 m) Low Loss LMR 240 Cable with TNC Connector
4G-CAB-LMR240-25
4G-CAB-LMR240-25= (Spare)
50-ft (15 m) Low Loss LMR 240 Cable with TNC Connector
4G-CAB-LMR240-50
4G-CAB-LMR240-50= (Spare)
75-ft (23 m) Low Loss LMR 240 Cable with TNC Connector
4G-CAB-LMR240-75
4G-CAB-LMR240-75= (Spare)
Multiband Omni-Directional Stick Outdoor 4G Antenna
ANT-4G-OMNI-OUT-N
Multiband Low-Profile Saucer Outdoor 4G Antenna
ANT-4G-SR-OUT-TNC
Multiband Panel Outdoor 4G Antenna
ANT-4G-PNL-OUT-N
50-ft (15m) Ultra Low Loss LMR 400 Cable TNC-N Connector
CAB-L400-50-TNC-N
20-ft (6m) Ultra Low Loss LMR 400 Cable with TNC-N Connector
CAB-L400-20-TNC-N
20-ft (6m) Ultra Low Loss LMR 400 Cable with N Connectors
CAB-L400-20-N-N
Lightning Arrestor Kit: female to female
CGR-LA-NF-NF
Lightning Arrestor Kit: male to female
CGR-LA-NM-NF
Note: All 4G LTE EHWICs (including spares) ship with dual 4G-LTE-ANTM-D and dual extender 4G-AE010-R.
Table 5.
4G C29XX Integrated Services Router G2 Bundles Ordering Information
Description
Part Number
CISCO2911 bundle w/EHWIC-4G-LTE-V, Universal Base, 256FL/512DR, Adv Security
C2911-4G-V-SEC/K91
CISCO2921 bundle w/EHWIC-4G-LTE-V, Universal Base, 256FL/512DR, Adv Security
C2921-4G-V-SEC/K9
CISCO2951 bundle w/EHWIC-4G-LTE-V, Universal Base, 256FL/512DR, Adv Security
C2951-4G-V-SEC/K9
CISCO1921 bundle w/EHWIC-4G-LTE-V, Universal Base, 256FL/512DR, Adv Security
C1921-4G-V-SEC/K9
CISCO2911 bundle w/EHWIC-4G-LTE-A, Universal Base, 256FL/512DR, Adv Security
C2911-4G-A-SEC/K9
CISCO2921 bundle w/EHWIC-4G-LTE-A, Universal Base, 256FL/512DR, Adv Security
C2921-4G-A-SEC/K91
CISCO1921 bundle w/EHWIC-4G-LTE-A, Universal Base, 256FL/512DR, Adv Security
C1921-4G-A-SEC/K9
CISCO2911 bundle w/EHWIC-4G-LTE-G, Universal Base, 256FL/512DR, Adv Security
C2911-4G-G-SEC/K9
CISCO2921 bundle w/EHWIC-4G-LTE-G, Universal Base, 256FL/512DR, Adv Security
C2921-4G-G-SEC/K9
CISCO1921 bundle w/EHWIC-4G-LTE-G, Universal Base, 256FL/512DR, Adv Security
C1921-4G-G-SEC/K9
1
1
1
1
1
1
1
1
1
Mobile IP requires separate data license
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
Page 12 of 12
Service and Support
Cisco offers a wide range of services programs to accelerate customer success. These innovative services
programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high
levels of customer satisfaction. Cisco services help you protect your network investment, optimize network
operations, and prepare your network for new applications to extend network intelligence and the power of your
business. For more information about Cisco services, refer to Cisco Technical Support Services and Cisco
Advanced Services.
Warranty Information
The Cisco 4G LTE EHWICs have a 90-day limited liability warranty.
Cisco and Partner Services for the Branch
Services from Cisco and our certified partners can help you transform the branch-office experience and accelerate
business innovation and growth in the Borderless Network. We have the depth and breadth of expertise to create
a clear, replicable, optimized branch-office footprint across technologies. Planning and design services align
technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical
services can help you improve operational efficiency, save money, and mitigate risk. Optimization services are
designed to continuously improve performance and help your team succeed with new technologies. For more
information, please visit http://www.cisco.com/go/services.
For More Information
For more information about the Cisco 4G LTE WWAN EHWICs, visit http://www.cisco.com/go/4g or contact your
local Cisco account representative.
For configuration guidance, see
http://www.cisco.com/en/US/docs/routers/access/interfaces/software/feature/guide/EHWIC-4G-LTESW.html.
For installation guidance, see
http://www.cisco.com/en/US/prod/collateral/modules/ps5949/ps11540/ehwic_4g_ltehw.pdf
http://www.cisco.com/en/US/docs/routers/connectedgrid/antennas/installing/Overview.html
Printed in USA
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.
C78-710314-02
03/13
Page 13 of 12

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project