Smart-Sync - Primex Wireless
Bluetooth® Wireless Technology
Smart-Sync Bridge is a key component of the Bluetooth® wireless technology synchronized clock network offered by
Primex. The Smart-Sync solution consists of a clock network that utilizes Bluetooth low energy wireless technology as its
communication method. The Smart-Sync Bridge communicates with the OneVue cloud application, acquiring accurate time
and clock configuration information and passing the information to the clocks within the network. The Smart-Sync Bridge
also relays clock status back to OneVue via an Ethernet connection. Information on individual clocks such as battery status,
radio frequency conditions and clock or network errors are also relayed to OneVue by the Smart-Sync Bridge.
The Smart-Sync solution uses Bluetooth low energy wireless technology to form the inter-clock and clock-to-bridge
connections. Bluetooth low energy wireless technology uses the 2.4 GHz ISM band and employs adaptive frequency
hopping techniques to reduce interference with other devices.
• Smart-Sync clocks ‘wake
up’ once daily
• Clocks synchronize
time via Smart-Sync
Kailee Rose
Log Out
Dashboard Monitoring Devices
Reports Help
Monitored Asset
Last Check In
Refrigerator P22
2015-02-05 3:08 PM
Sadie Cook
2015-02-05 1:28 PM
Refrigerator L53
2015-02-01 2:36 PM
James Gray
2015-02-05 2:48 PM
Refrigerator P22
2015-02-05 3:08 PM
2015-02-05 2:48 PM
2015-02-05 1:28 PM
Refrigerator L53
2015-02-01 2:36 PM
• Clocks form network
based on strongest signal
to another clock or the
Smart-Sync Bridge
• If one clock fails, other
clocks will ‘find their way
home’ to the strongest
• Smart-Sync Bridge reports
clock status to OneVue
• OneVue accessible via PC
or mobile devices
Model No.
Smart-Sync with Ethernet (POE capable)
Note: Orient the Smart-Sync Bluetooth Antenna to point straight down
(vertically) from the device to maximize its signal reception.
Model No.
AC Adapter
AC Adapter Extension 6’ (1.8 M)
Back-up Battery Pack Replacement
Note: Each Smart-Sync Bridge comes standard with an AC-Adapter and Backup
Battery pack. The accessories listed above are for re-order or if an AC
power cable extension is required (installation specific).
• Each Smart-Sync Bridge supports a network of up to 200 SmartSync capable clocks*
• Supports bi-directional communication with Smart-Sync Clocks
- Sends updated Time & Configuration to clock network
- Receives individual clock status from clocks and network
• AC Power Adapter
- 5V DC USB Mini B (5 pin Connector)
- 5 ft (1.5m) cable
- Input: 100-240 VAC, 50/60HZ, 0.4A
- Outut: 5V, 1.0A max
• Updates time, collects and reports clocks status once per day
after 8 hour deployment mode**
• Power-Over-Ethernet (Model dependent)
- Compliant with IEEE standards
• Supports OneVue connections via Ethernet (POE capable)
• Provides back-up battery support: ~ 8 hours of backup usage
without external power applied
• LCD display
- Connection icon for OneVue connection status
- LCD provides Smart-Sync Bridge status information
• ABS plastic
• LED indicators
- Green LED indicates external power is applied
- Yellow LED signals connection issues with OneVue
- Red LED signals Smart-Sync Bridge not able to get NTP time
• External Antenna Dimension: 3.3” L (8.4cm), 0.3’ Diameter (0.8cm)
*This number may vary depending on location of Smart-Sync Bridge,
• Two User Buttons: LED Alarm Silence button, manual network
connection button
• Case Dimension: 4.7’ H x 3.7” W x 1.3” D (11.93cm x 9.39cm x
• Weight: 0.3 lb (136 grams) with backup battery pack
• LCD display size: 0.75” H x 1.38” W (1.90cm x 3.50cm)
• LED Status Indicators: green, yellow, red
distance between clocks, number of floors and possible electronic
interference (in healthcare settings)
**Deployment Mode is entered when clocks and Smart-Sync Bridge are
• Mounting Options: Keyhole slot for wall mounting, or surface/wall
mounting using supplied dual-lock adhesive mounting strips
1st powered on, network builds every ½ hour for 8 hours
• Operating temp: 32°F to 122°F (0 °C to + 60 °C)
– indoor use only
• Storage temp: -4°F to 140°F (-20° C to + 85° C)
• FCC, CE, IC and Bluetooth® Certified
3.7” W
4.7” H
PrimexEVENTSeries Sensor
1.3” D
Note: Channels 37, 38, and 39 are
used with the Smart-Sync
Bridge. If the Bridge detects
interference 37 it will hop to
channel 38 or 39.
To Learn More:
Email:[email protected]
Note: Orient the Smart-Sync
Bluetooth Antenna to
point straight down
(vertically) from the
device to maximize its
signal reception.
3.3” L (8.4cm)
Fully Extended
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of
such marks by Primex, Inc. is under license. Other trademarks and trade names are those of their respective owners.
OneVue is a trademark of Primex. The innovative technology software solution for facility and time
synchronization monitoring and reporting. All other trademarks are the property of their respective owners.
©2017 Primex. The Primex logo is a registered trademark of Primex.
All Rights Reserved. 4.17
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF