Model #: APSINT2424 - New Age Solar Technologies
Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: APSINT2424
PowerVerter® APS INT Series 2400W Inverter/Charger with Auto-Transfer Switching and Hardwire Input/Output
Highlights
24V DC or 230V AC input; 230V, 50 Hz output (hardwired)
2400 watts continuous, 3600 watts OverPower™ and 4800 watts
DoubleBoost™ inverter output (see specifications)
3 stage, 30 amp selectable wet/dry cell battery charger
Auto Transfer Switching option for battery backup / UPS operation
Reliability enhanced large-transformer design with protected DC and AC
wiring terminals
Description
Tripp Lite's APSINT2434 DC-to-AC inverter with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS,
a standalone power source or an automotive inverter. Supplies up to 2400 watts of continuous 230V AC power from any 24V battery or automotive
DC source. When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3
stage, 30 amp charging system. In UPS mode, the APS system responds to blackouts and voltage fluctuations with a near instantaneous automatic
transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies batteries and cabling see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, plus
efficient PWM sine wave AC output in inverter and UPS backup modes. Reliable large transformer design, with frequency control powers resistive
electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRM4 wired remote power
switch with full status LEDs provides remote power inverter on/off switching and continuous status information (APSRM4 sold separate). Supports an
unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions
with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
Applications
Versatile inverter/charger system with auto-transfer switching serves as an automotive inverter for RVs, over-the-road trucking, conversion
vans, marine environments and fleet service vehicles; a standalone alternative power source for off-grid, alternative energy or export
applications and as an uninterruptible power supply (UPS) for items compatible with a 20 millisecond transfer time. NOTE: For sump pump
applications, Tripp Lite recommends its "UT" Utility Truck Inverter/Chargers.
Package Includes
APSINT2424 Inverter/Charger
Instruction manual with warranty information
Features
Supports 230V AC output from a 230V AC line power source or 12V DC battery source
20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts and voltage fluctuations for
equipment compatible with a one cycle transfer time
Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to 10 seconds (see specification
chart)
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.
OverPower inverter output supports longer duration overloads to 150% for 1-60 minutes under ideal battery and temperature conditions.
3 stage, 30 amp battery charger with adjustable settings for wet/gel battery types offers fast, reliable battery recharging
3 position operating mode switch supports "AUTO" mode to enable automatic transfer between DC and AC modes, CHARGE-ONLY to
maintain a full battery charge when AC is present without auto transfer and SYSTEM OFF settings
Set of six front panel LEDs display AC/DC operational modes, overload status, DC voltage level, shutdown status and system fault status
Set of 4 configuration dipswitches support wet/gel battery charging profiles, adjustable 259/264V high voltage auto transfer during
overvoltages and selectable 144/163/182/201V AC low voltage auto transfer during brownouts
Set of 4 additional configuration dip switches support 4 levels of charger limiting relative to output load size
Resettable 10A charger AC input breaker and resettable 15A AC output breaker and automatic 2 speed cooling fan protect the inverter from
load and temperature related failures
Automatic overload and thermal shutoff safely turns off inverter as excessive loads or overheating conditions develop
Front panel remote control connector enables remote off/on switching (requires APSRM4 switch accessory)
Specifications
OVERVIEW
Intended
Application
Emergency Home Power
OUTPUT
Frequency
compatibility
50 Hz
Output watts
2400
Continuous output
capacity (watts)
2400
Peak output
capacity (watts)
4800
Output nominal
voltage
230V
Output voltage
regulation
LINE POWER (AC): Maintains 230V nominal sine wave output from line power source. INVERTER POWER (AC):
Maintains PWM sine wave output voltage of 230 VAC (+/-5%).
Output frequency
regulation
50 Hz (+/- 0.3 Hz)
Overload
protection
Includes 10A input breaker dedicated to the charging system and 15A output breaker for AC output loads.
Outlet quantity /
type
Hardwire
INPUT
Nominal Input
Voltage(s)
Supported
230V AC
Recommended
Electrical Service
DC INPUT: Requires 24VDC input source capable of delivering 112A for the required duration (when used at full
continuous capacity - DC requirements increase during OverPower and DoubleBoost operation). For automotive
applications, professional hardwire installation with 300A minimum battery system fusing is recommended.
Maximum input
amps / watts
DC INPUT: Full continuous load - 112A at 24VDC. AC INPUT: 17 amps at 230VAC with full inverter and charger load
(7A max charger-only / combined input load to support charger and AC output is automatically controllable to
66%-33%-0% based on AC output loading using the charger limiting set points - see manual for setting instructions)
Input connection
type
DC INPUT: Set of 2 DC bolt-down terminals. AC INPUT: Hardwire via built in junction box with cover plate
Voltage
compatibility (VAC)
230
Voltage
compatibility (VDC)
24
BATTERY
Expandable
battery runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage
(VDC)
24
Battery Pack
Accessory
(optional)
98-121 sealed lead acid battery (optional)
Battery recharge
rate
30 amp
LEDS ALARMS & SWITCHES
Switches
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant on/off
control of the inverter system when used in conjunction with optional APSRM4 accessory when used in inverter mode.
In AC uninterruptible power mode, "auto/remote" setting enables automatic transfer from line power to battery power to maintain continuous AC power to connected loads.
Front panel LEDs
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
PHYSICAL
Shipping weight
(lbs)
42
Shipping weight
(kg)
19.5
Cooling method
Multi-speed fan
Unit Dimensions
(HWD/in)
7.25 x 8.5 x 16.25
Unit Dimensions
(HWD/cm)
18.42 x 21.59 x 41.28
Shipping
Dimensions
(HWD/in)
13.5 x 15 x 21.5
Shipping
Dimensions
(HWD/cm)
34.29 x 38.1 x 54.61
Unit weight (lbs)
38.2
Unit weight (kg)
17.3
Material of
construction
Polycarbonate
Style
Heavy-duty with built-in battery charger
Form factors
supported
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting
information)
ENVIRONMENTAL
Relative Humidity
0-95% non-condensing
LINE / BATTERY TRANSFER
Transfer time from
line power to
battery mode
20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)
Low voltage
transfer to battery
power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,
182, 201V - see manual)
High voltage
transfer to battery
power
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to 264
- see manual)
SPECIAL FEATURES
Appearance
Black color
Load Sensing
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of any
level, up to 150 watts.
Remote control
capability
Yes
CERTIFICATIONS
Certifications
RoHS Compliant
WARRANTY
Product Warranty
Period (U.S. &
Canada)
1-year limited warranty
Product Warranty
Period
(International)
2-year limited warranty
Product Warranty
Period (Mexico)
2-year limited warranty
Product Warranty
Period (Puerto
Rico)
1-year limited warranty
Related Items
Optional Products
Related Model
Description
Qty.
APSRM4
Remote Control Module - for Tripp Lite Inverters and Inverter/Chargers
1
BP-260
Ideal battery housing for use with Tripp Lite PowerVerter APS inverter/charger systems
with a 12 or 24V DC system voltage.
1
98-121
12V DC Sealed, Maintenance-Free Battery
1
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=1340.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement