Power Supply Test Equipment
Power Supply Test Equipment
All electronic products need electricity to work
normally and the power supplies offer it are built in
these products in various types and specifications.
Though the products with complicate components
inside need different voltage, current and power for
application, the stability of the power supply is the key
factor to determine the product quality.
In addition to applying power supply test solution
in the industries of information, communication,
aerospace and national Defense, Chroma is also
utilizing its proficient techniques in power supply test
field to implement customized test solutions for energy
saving products such as hybrid electric vehicle, LED
lighting device, solar energy and fuel cell that are being
developed proactively due to global resources shortage.
Selection Guides
Switcher Analyzer
DC Electronic Load
AC Electronic Load
AC Source
Power Analyzer
Digital Power Meter
DC Power Supply
Automatic Test System
11-1
11-5
11-6
11-22
11-23
11-35
11-36
11-37
11-51
Overview
Automatic Test System
Burn-in DC Power Supply
AC Electronic Load
AC Source
DC Electronic Load
Digital Power Meter
Power Analyzer
DC Power Supply
Selection Guides
DC Electronic Load Selection Guide
Series
Power Rating (Modular)
60W, 100W,
250W, 300W
Current
Voltage
Configuration
Max. Channel / Mainframe
Up to 60A
Up to 254V
Modular
4
6310A Series
200W, 100Wx2(Dual),
30W&250W, 300W,
600W, 1200W
Up to 240A
Up to 500V
Modular
8
Operating Mode
CC/CR/CV/CP
CC/CR/CV/CP
CC/CR/CV/CP
CC
CC/CR/CV/CP
CC/CR/CV/CP/CZ
Slew Rate
Dynamic Loading
Measurement
External Waveform Control
Short Circuit Test
Von Point Control
V&I Monitor
Current share measurement
Synchronize Dynamic
Synchronize Control Multi-load
Master/Slave Parallel Mode
Data Setting (Rotary)
Data Setting (Keyped)
Status Storage (100 files)
Remote Controller
GO/NG Test
Fan speed control
Self test at power on
Programmable test (10 Pro.)
RS-232 Interface
GPIB Interface
PAGE
Up to 2.5A/us
Y
V, I, P, Noise
Y
Y
Y
Y
Y
Y
Y
Option
Y
Y
Y
Standard
Option
11-6
Up to 10A/us
Y
V, I
Y
Y
Y
Y
Y
Y
Option
Y
Y
Y
Y
Standard
Option
11-8
Up to 10A/us
Y
V, I
Y
Y
Y
Y
Y
Y
Y
Y
Option
Y
Y
Y
Y
Standard
Option
11-15
Up to 1000A/us
Y
V, I, Vpeak
-
Up to 41A/us
Y
V, I, P
Y
Y
Y
Y
Y
Y
Y
Y
Y
Option
Y
Y
Y
Y
Standard
Standard
11-12
Up to 8A/us
Y
V, I, P, Vpeak
Y
Y
Y
Y
Y
Y
Y
Y
Y
Option
Y
Y
Y
Y
Option
11-20
AC Source Selection Guide
Step 1 by Function
Series
Power Measurement
PLD simulation
Arbitrary waveform
DC output
Programmable output impedance
Harmonic measurement
IEC Regulation Testing
GPIB interface
RS-232 interface
PAGE
Step 2 by Model
Series
Power
375VA
500VA
800VA
1000VA
1200VA
1500VA
2000VA
3000VA
4000VA
4500VA
6000VA
6000VA
9000VA
12000VA
18000VA
30000VA
36000VA
PAGE
11-1
6300 Series
6330A Series
6340 Series & 63472
63200 Series
200W, 100Wx2(Dual)
2600W, 5200W, 6500W,
30W&250W, 300W,
625W, 200W
10400W, 15600W
600W, 1200W
Up to 240A
Up to 300A
Up to 1000A
Up to 500V
Up to 50V
Up to 500V
Modular
Stand-Alone
Stand-Alone
8
1
1
Y
Y
Y
Y
Y
Y
Y
Y
Standard
Option
11-18 & 11-19
63600 Series
63800 Series
100W, 300W, 400W
1800W, 4500W
Up to 80A
Up to 80V
Module
10
Up to 45A
Up to 500V
Stand-Alone
1
CC/CR/CV/CP/
DC Rectified
Up to 600A/ms
V, I, P, R
Y
Y
Y
Y
Y
Y
Y
Y
Standard
Standard
11-22
6400 Series
Standard
Option
Option
11-31
6500 Series
Standard
Standard
Standard
Standard
Option
Option
11-33
61500 Series
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Option
Option
11-23
61600 Series
Standard
Standard
Option
Option
11-26
6400 Series
1ø
3ø
6404
6408
6415
6420
6430
6460
6463
6490
-
6500 Series
1ø
3ø
6512
6520
6530
6560
6590
-
11-31
11-33
61500 Series
1ø
3ø
61501
61502
61503
61504
61505
61511
61512
61511 + A615103
61512 + A615103
11-23
61600 Series
1ø
3ø
61601
61602
61603
61604
61505
61611
61612
61611 + A615103
61612 + A615103
11-26
61700 Series
Standard
Standard
Standard
Standard
Option
Option
11-29
61700 Series
3ø
61701
61702
61703
61704
61705
11-29
All specifications are subject to change without notice.
Selection Guides
Power Analyzer and Power Meter Selection Guide
Mode
6630
6632
66201
Phase
1 or 3
1 or 3
1
1
Voltage range
600Vrms / 2000Vpk
600Vrms / 2000Vpk
500Vrms
500Vrms
Current range
20Arms / 300Apk
20Arms / 300Apk
4Arms
20Arms
40-70Hz
40-70Hz
15-10kHz
15-10kHz
Graphical Display
V
-
-
-
Result storage
V
-
-
-
Built-In Floppy disk
V
-
-
-
Rotary / keypad Data input
V
-
-
-
GPIB Interface
V
V
V
V
RS-232 Interface
V
V
USB interface
USB interface
Frequency
Centronics Interface
66202
V
V
-
-
V, I, F, PF, ø, W, Wr, Wa, P, Q, S,
CF, Vpk, Vp-p, Ipk, Ip-p, THD
V, I, F, PF, ø, W, Wr, Wa, P, Q, S,
CF, Vpk, Vp-p, Ipk, Ip-p, THD
V, I, PF, W, VA, P, CF, Vpk, Ipk
V, I, F, PF, W, Wr, Wa, P,
CF, Vpk, Ipk, Ip-p, THD, E
AC/DC Measurement mode
V
V
AC + DC only
AC + DC only
40th Harmonics Measurement
V
V
-
V
Pre-Compliance IEC 61000-3-2
V
V
-
V
DFT & DSP Technology
V
V
V
V
Waveform display
V
-
Software
Software
Waveform moving cursor
V
-
-
-
Waveform trigger function
V
-
-
-
Recording function
V
-
Software
Software
Combination to Chroma 6000 ATE
V
V
-
-
Parameters
Stand alone operating
PAGE
All specifications are subject to change without notice.
V
-
V
V
11-35
11-35
11-36
11-36
11-2
Selection Guides
DC Power Supply Selection Guide
62000H Series /
Model
5KW & 10KW & 15KW
Volts
Amps
Model
0-6
0-7
0-7.5
0-8
0-10
0-12
0-15
0-20
0-250A/
62075H-30/
0-30
0-375A
62100H-30
0-33
0-35
0-125A/
62050H-40/
0-40
0-250A/
62100H-40/
0-375A
62150H-40
0-55
0-60
0-63A/
62050H-80/
0-80
0-126A
62100H-80/
0-188A
62150H-80
0-100
0-120
0-150
0-300
0-450
0-600
PAGE
Model
Volts
0-6
0-7
0-7.5
0-8
0-10
0-12
0-15
0-20
0-30
0-33
0-35
0-40
0-55
0-60
0-80
0-100
0-120
0-150
0-300
0-250
0-600
PAGE
11-3
62050H-450/
62100H-450/
62150H-450
62050H-600/
62100H-600/
62150H-600
0-11A/
0-22A/
0-33A
0-9A/
0-18A/
0-25A
62000P Series /
600W & 1.2KW & 2.4KW & 5KW
Amps
Model
0-130
6210-7.5
0-50
6210-20
0-33
6210-33
0-25
6210-40
0-18
6210-60
0-10
6210-100
0-7
0-3.5
6210-150
6210-300
0-1.7
6210-600
11-47
Amps
Model
0-300
6202F-7.5
0-140
6201F-7.5
0-220
6202F-12
0-100
6201F-12
0-130
6202F-20
0-60
6201F-20
0-85
6202F-33
0-35
6201F-35
0-120
62012P-40-120/
62024P-40-120
0-60
62012P-80-60/
62024P-80-60
0-25/
0-50/
0-100
62006P-100-25/
62012P-100-50/
62024P-100-50/
62050P-100-100
0-8
62006P-300-8
0-8
62012P-600-8/
62024P-600-8
0-70
6202F-40
0-30
6201F-40
0-46
6202F-60
0-20
6201F-60
0-28
6202F-100
0-12
6201F-100
0-18
0-9
6202F-150
6202F-300
0-8
0-4
6201F-150
6202F-300
0-4
6202F-600
0-2
6202F-600
11-37
6210 Series / 1KW
Amps
Model
6201F Series /
1.2KW
Amps
Model
6201F-6
0-200
62006P-30-80
0-80
11-40
6202F Series /
2.8KW
11-49
6203 Series / 300W
Amps
Model
11-48
6200 Series / 60W
Amps
Model
0-7
6200-7
6200-15
6200-20
6200-30
0-20
6203-15
0-10
6203-30
0-4
0-3
0-2
0-5
6203-60
0-1
6200-60
0-0.5
6200-120
0-0.25
6200-250
11-46
11-45
All specifications are subject to change without notice.
Selection Guides
Automatic Test System Selection Guide
System Model
6000
8000
8010
8020
8200
8490
8495
UUT Type
Battery Charger
V
Switching Mode Rectifier
V
Switching Power Supply (Multi-Output)
V
V
Adapter
V
V
DC to DC Converter
V
V
UPS(Uninterruptible Power System)
V
Inverter ( DC to AC )
V
Switching Power Supply (PFC Circuit)
V
V
V
V
V
V
V
V
LCD Inverter
V
Electrical Ballast
V
Functionality
Open System Architecture
V
Optional Instrument Extendible
V
Support Windows 98/NT/2000 or higher
V
Support DOS
V
V
V
V
V
V
V
User Permission Setting
V
System Administrator Access Log
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
Network Management
V
V
V
V
Support Shop Floor Control Software1
V
V
V
V
V
V
V
Test Report Editing
V
V
V
V
V
V
V
Test Item Editing
V
V
Test Program Editing
V
V
V
V
V
V
V
Test Program Saving
V
V
V
V
V
V
V
Debug Run
V
V
GO/NO GO Test
V
V
V
V
V
V
V
Statistical Analysis Control
V
V
V
V
V
V
V
Test Report Printing
V
V
V
V
V
V
V
2
On-Line Control
V
Report Wizard3
V
PAGE
11-51
11-53
V
V
V
11-56
11-58
11-55
11-59
11-63
Notes:
1. Support Shop Floor Control Software:
The system can work with the Shop Floor Control Software that used on the manufacturing production line to attain overall factory control and remote control through internet.
2. On-Line Control:
Enables user to operate all instruments on-line via one computer screen, which incorporates the test values from individual instrument to save time and resources.
3. Report Wizard:
It automatically generates various R&D reports including oscilloscope waveform and etc. to meet customer’s needs and reduce the report preparation time.
All specifications are subject to change without notice.
11-4
Model No.
Switcher Analyzer
620/650
GPIB
Configuration
■ IEEE-488 bus interface.
■ Self-contained master/slave structure with 10 analyzers
operate in parallel.
■ 2 different models cover up to 100V/50A/300 watts.
■ Building block to Chroma Power supply Auto Test System.
■ System diagnosis and calibration routines to guarantee
optimal instrument quality.
■ EEPROM storage for 30 customized BASIC TESTs and 5
PROGRAM TESTs.
■ GO/NG and readings display to facilitate testing efficiency.
■ Centronics printer interface.
Load Resistance
Slew Rate Range
Dynamic Period Range
Measurement
DC Voltage
RMS or PEAK to Peak Voltage
Time Interval
Basic Test No.
Config
OPTO Isolation
Protection
IEEE 488 Bus Interface
Centronics Interface
Dimension (HxWxD)
Weight
Range
Resolution
Accuracy
Range
Resolution
Accuracy
Max. Frequency
Range
Resolution
Accuracy
650
200W
100V
[email protected]/[email protected]
0-1A/0-20A
12 bits
0.2%+0.7%F.S. / 0.6%+0.7%F.S.
1.001~1000Ω/ 0.070~1000Ω
12 bits
0.2%+0.7%F.S.( ) / 0.6%+0.7%F.S.( )
1-50mA/µs / 2-1000mA/µs
4µs-10 ms
300W
100V
[email protected]/[email protected]
0-1A/0-50A
12 bits
0.2%+0.7%F.S. / 0.6%+0.7%F.S.
1.001~1000Ω / 0.030~ 800Ω
12 bits
0.2%+0.7%F.S.( ) / 0.6%+0.7%F.S.( )
1-50mA/µs / 5-2500mA/µs
4µs-10 ms
0-10V/0-100V
14 bits
0.05%F.S. / 0.02%+0.05%F.S.
0-1V/0-10V
12 bits
2%+2%F.S.
20MHz
0-16 Sec
1µs
10µs
8
0-10V/0-100V
14 bits
0.05%F.S. / 0.02%+0.05%F.S.
0-1V/0-10V
12 bits
2%+2%F.S.
20MHz
0-16 Sec
1µs
10µs
8
YES
YES
YES
YES
132 x 424.5 x 466.2 mm / 5.2 x 16.71 x 18.35 inch
16 kg / 35.24 lbs
YES
YES
YES
YES
132 x 424.5 x 466.2 mm / 5.2 x 16.71 x 18.35 inch
16.8 kg / 37 lbs
Ω
Load Current
Max.
Min.
Range
Resolution
Accuracy
Range
Resolution
Accuracy
620
Ω
SPECIFICATIONS
Model
Electronic Load
Max. Power Sink
Operating
Voltage
Programmable Electronic Load
■ Programmable dynamic loading with speed up to 125 KHz.
■ Programmable slew rates, load levels, load periods, and
conducting voltage.
Ω
KEY FEATURES
Testing
■ 10 universal power supply output BASIC tests.
■ PROGRAM TEST of up to 36 customized BASIC tests,
with 5 built-in loops and 50000 run cycles in a program.
Precision Measurement
■ Remote sensing capability.
■ DC voltage with 0.05% F.S. accuracy.
■ 14 bits A/D converter with multirange measurement.
■ Transient time response with 10µs accuracy and 1µs
resolution.
■ 8 TTL signals as timing measurement actuators.
■ Programmable measurement delay time and
measurement period.
Ω
Switcher Analyzer
Model 620/ 650
200W, 300W
■ Constant current or resistance loading.
■ Internal or external controlled load form.
■ Photo coupler isolation to offer true floating load.
■ Protection against reverse voltage, over voltage, over
current, over power, and over temperature.
■ 4 programmable outputs for external relay control.
ORDERING INFORMATION
620: Switcher Analyzer 20A/100V/200W
650: Switcher Analyzer 50A/100V/300W
11-5
All specifications are subject to change without notice.
6300 Series
GPIB
6304: Mainframe for 4 Load modules
6301: Mainframe for
A600011: Test Fixture
single Load module
(6 channels)
A630003: RC-63 Remote
Measurement (20MHz) Kit
Controller
Passive Component
Test Instruments
A630001: Noise
Power Supply
Test Equipment
Electrical Safety
Test Instruments
Each load module uses current close loop design and connects
all power MOSFET devices parallelly to insure high accuracy
load control with minimum drift of less than 0.15% of the current
setting. The FET technology accomplishes minimum input
resistance and enables the load to sink high current even at very
low voltage. For example, model 63030 is capable of sinking 60A
at minimum 1V output, and is well suited for testing the new 3.3V
low voltage power supplies. Low voltage operation, down to zero
voltage is possible at correspondingly reduced current level.
(terminal block)
Optical Inspection
Equipment
The 6300 has self diagnosis routine to maintain instrument
performance at all time. It is also protected against OPP, OCP,
OVP, OTP, and reverse polarity to guarantee quality and reliability
for even the most demanding engineering testing and ATE
applications.
(PC standard)
A600014 : Adapter for A600011/A600012 Test Fixture
Video & Color
Test Equipment
Real time measurement of voltage, current, and power is integrated
in each 6300 load module using 15-bits precision measurement
circuit. The user can perform on line voltage measurement and
adjustment, or simulate short circuit test using simple front panel
keypad operation. Additionally, the load module offers optional
noise measurement function capable of detecting 20MHz noise via
differential mode input without the need of a scope.
Mainframe
A630003 : RC-63 Remote Controller
A630006 : 19" Rack Mounting Kit for Model 6304 Mainframe
A600011 : Test Fixture (6 channels)
A600013 : Adapter for A600011/A600012 Test Fixture
LCD/LCM
Test Equipment
The 6300 can simulate a wide range of dynamic loading
applications. The loading waveform is user programmable in
slew rates, load levels, duration, and conducting voltage. The
load can also be controlled via external analog control voltage,
or signal generator to simulate specific application requirements.
Furthermore, up to 100 sets of system operating status can
be stored in battery backup SRAM and recalled instantly for
automated testing application.
Module
A630002 : GPIB Interface for Model 6304/6314/6334/6340
LED
Test Equipment
KEY FEATURES
■ Plug-in electronic load modules in selectable mainframes.
■ Parallel load modules up to 2400W for high current and
power application.
■ Master/Slave interface for synchronizing multiple loads.
■ GPIB/RS-232 Interface.
■ CC, CR, CV, and CP operation modes.
■ Precision loading delivers 150µA resolution.
■ Minimize input resistance allowing load to sink high
current at low voltage.
■ Dynamic loading with speed up to 20kHz
■ Real time load simulation and output measurement.
■ Store up to 100 sets of front panel input Status for
instant recall.
■ 15 bits precision voltage and current measurement
with multi-range selection.
■ Remote sensing capability.
■ 20MHz differential mode noise measurement.
■ Short circuit test & short current measurement.
The 6300 family offers 4 types of modular loads with power
ranging from 60 watts to 300 watts, current setting from 150µA to
60A, and voltage measurement from 0.5mV to 250V. Each load is
isolated and floating, programmable in dual current ranges and
measuring voltage ranges, and capable of synchronizing interface
for master/slave control operation. The load can be operated in
constant current, constant resistance,constant voltage, or constant
power mode.
ORDERING INFORMATION
6301 : Mainframe for single Load module
6304 : Mainframe for 4 Load modules
63006 : Load Module 6A/60V/60W
63010 : Load Module 20A/60V/100W
63025 : Load Module 10A/250V/250W
63030 : Load Module 60A/60V/300W
A630001 : Noise Measurement (20MHz) Kit for Each Load
Semiconductor/IC
Test Equipment
Chroma Model 6300 series Smart Electronic Load System is
the state-of-the-art instrument for testing DC power sources
and power electronic components. The system is configured
by plugging the user selectable load modules into the system
mainframe, and operated using the instrument front panel keypads
or the remote controlled instructions via GPIB/RS-232 interface.
The load modules can be programmed independently for testing
multi-output DC/DC power supplies, or in parallel for testing high
power application.
Smart Electronic Load
Model 6300 Series
60, 100, 250, 300W
Solar Cell
Test Equipment
RS-232
Model No.
DC Electronic Load System
General Purpose
Test Instruments
voltage
MODEL 63030 INPUT CHARACTERISTICS
All specifications are subject to change without notice.
• Continued on next page ➟
11-6
PXI Instruments
& Systems
Amperes
Model No.
DC Electronic Load System
0~2A
0.5mA
0.1%+0.1%F.S
0~20A
5mA
0.1%+0.2%F.S.
63025
25W
250W
0~1A
0~10A
1.3~256V (1.3~250V for CR Mode)
1.3V at 1A
1.5V at 10A
0~1A
0.25mA
0.1%+0.1%F.S.
0~10A
2.5mA
0.1%+0.2%F.S.
63030
30W
300W
0~6A
0~60A
0.8~64V (0.8~60V for CR Mode)
0.8V at 6A
1.0V at 60A
0~6A
1.5mA
0.1%+0.1%F.S.
0~60A
15mA
0.1%+0.2%F.S.
0.075Ω~300Ω (100W/16V)
3Ω~12kΩ (100W/60V)
12 bits
0.1 (0.075~300Ω),
0.01 (100Ω~12kΩ)
0.25Ω~1kΩ (250W/25V)
25Ω~100kΩ (250W/250V)
12 bits
0.1 (0.25Ω~1kΩ),
0.01 (25Ω~100kΩ)
0.025Ω~100Ω (300W/16V)
1Ω~4kΩ (300W/60V)
12 bits
0.1 (0.025Ω~100Ω),
0.01 (1Ω~4kΩ)
1~64V
16mV
0.05%±0.1%F.S.
1.5~256V
64mV
0.05%±0.1%F.S.
1~64V
16mV
0.05%±0.1%F.S.
Ω
Ω
0.1~100W
10mW
3%F.S.
C.C. & C.R.
0.025ms~10ms
1ms~10s
1µs
1ms
2%F.S.
0.32~80mA/µs
3.2~800mA/µs
0.32mA/µs
3.2mA/µs
10%±20µs
15µs (typical)
0~2A
0~20A
0.5mA
5mA
0.2%F.S.
0~2A
0~20A
Ω
Ω
0.01~20W
1mW
2%F.S.
0.06~25W
2mW
2%F.S.
C.C. & C.R.
0.025ms~10ms
1ms~10s
1µs
1ms
2%F.S.
0.16~40mA/µs
1.6~400mA/µs
0.16mA/µs
1.6mA/µs
10%±20µs
15µs (typical)
0~1A
0~10A
0.25mA
2.5mA
0.2%F.S.
0~1A
0~10V
0.2%F.S.
0.25%F.S.
16~64V
2mV
0.02%+0.1%F.S.
0~2A
0~20A
0.0625mA
0.625mA
0.1%+0.1%F.S.
0~20W
0.125mW
0~10A
0.03~30W
3mW
2%F.S.
20~100W
1.25mW
0.25%F.S.
0~6A
0~60A
0~10V
0.25%F.S.
0.025Ω (max.)
10A
300kΩ (min.) at 250V
100PPM/℃ (typical) CC
0.2%F.S.
0.25%F.S.
0.016Ω (max.)
60A
100kΩ (min.) at 60V
100PPM/℃ (typical) CC
0~25.6V
25.6~256V
0.8mV
8mV
0.02%+0.1%F.S.
0~1A
0~10A
0.0312mA
0.312mA
0.1%+0.1%F.S.
0~25W
0.25mW
0.3~300W
30mW
3%F.S.
C.C. & C.R.
0.025ms~10ms
1ms~10s
1µs
1ms
2%F.S.
0.001~0.25A/µs
0.01~2.5A/µs
0.001A/µs
0.01A/µs
10%±20µs
15µs (typical)
0~6A
0~60A
1.5mA
15mA
0.2%F.S.
0~10V
0.04Ω (max.)
20A
100kΩ (min.) at 60V
100PPM/℃ (typical) CC
0~16V
0.5mV
0.6~250W
20mW
3%F.S.
Ω
Ω
Ω
11-7
63010
20W
100W
0~2A
0~20A
0.9~64V (0.9~60V for CR Mode)
0.9V at 2A
1.0V at 20A
Ω
SPECIFICATIONS
Model
63006
Power
20W
60W
Current
0~0.6A
0~6A
Voltage
0.9~64V (0.9~60V for CR Mode)
Min. Oper. Voltage (DC)
0.9V at 600mA
1.0V at 6A
Constant Current Mode
Range
0~0.6A
0~6A
Resolution
0.15mA
1.5mA
Accuracy
0.1%+0.1%F.S.
0.1%+0.2%F.S.
Constant Resistance Mode
0.25Ω~1kΩ (60W/16V)
Range
10Ω~40kΩ (60W/60V)
Resolution
12 bits
0.1 (0.25~1kΩ),
Accuracy
0.01 (10~40kΩ)
Constant Voltage Mode
Range
1~64V
Resolution
16mV
Accuracy
0.05%±0.1%F.S.
Constant Power Mode
Range
0.003~20W
0.03~60W
Resolution
0.3mW
3mW
Accuracy
2%F.S.
3%F.S.
Dynamic Mode
Dynamic Mode
C.C. & C.R.
T1&T2
0.025ms~10ms
1ms~10s
Resolution
1µs
1ms
Accuracy
2%F.S.
Slew Rate
0.1~25mA/µs
1.0~250mA/µs
Resolution
0.1mA/µs
1.0mA/µs
Accuracy
10%±20µs
Min. Rise Time
15µs (typical)
Current
0~0.6A
0~6A
Resolution
0.15mA
1.5mA
Accuracy
0.2%F.S.
Ext Wave Mode
Range
0~0.6A
0~6A
Level
0~10V
Accuracy
0.2%F.S.
0.25%F.S.
Short Circuit
Resistance
0.08Ω (max.)
Current
6A
I/P Resistance(Load Off)
100kΩ (min.) at 60V
Temp. Coefficient
100PPM/℃ (typical) CC
Measurement Section
Voltage Read Back
Range
0~16V
16~64V
Resolution
0.5mV
2mV
Accuracy
0.02%+0.1%F.S.
Current Read Back
Range
0~0.6A
0~6A
Resolution
0.0187mA
0.1875mA
Accuracy
0.1%+0.1%F.S.
Power Read Back
Range
0~20W
20~60W
Resolution
0.0375mW
0.375mW
Accuracy
0.5%F.S.
General
Dimensions
143 x 104 x 443.7 mm /
(H x W x D)
5.6 x 4.1 x 17.5 inch
Weight
5 kg / 11 lbs
6300 Series
25~250W
2.5mW
0~16V
0.5mV
16~64V
2mV
0.02%+0.1%F.S.
0~6A
0~60A
0.1875mA
1.875mA
0.1%+0.1%F.S.
0~30W
0.375mW
30~300W
3.75mW
0.5%F.S.
0.5%F.S.
0.5%F.S.
143 x 104 x 443.7 mm /
5.6 x 4.1 x 17.5 inch
5 kg / 11 lbs
143 x 104 x 443.7 mm /
5.6 x 4.1 x 17.5 inch
5 kg / 11 lbs
143 x 104 x 443.7 mm /
5.6 x 4.1 x 17.5 inch
5 kg / 11 lbs
All specifications are subject to change without notice.
RS-232
6310A Series
GPIB
The 6310A series can simulate a wide range of dynamic
loading applications. The waveforms programmable parameters
include: slew rate, load level, duration and conducting voltage.
Furthermore, up to 100 sets of system operating status’ can be
stored in EEPROM and recalled instantly for automated testing
applications.
The 6310A series has a self-diagnosis routine to maintain
instrument performance. It also provides OP, OC, OV, OT, and
reverse polarity protection to guarantee quality and reliability
for even the most demanding engineering testing and ATE
applications.
For example, the figure on the right shows that the 6310A's
internal timer can be initiated automatically when the battery
voltage falls below a preset value. The timer will continue counting
until the second preset value is reached.
Power Supply
Test Equipment
The Timing function can be used in testing battery, super capacitor
discharge and other similar applications.
Final Voltage
Battery Voltage
Loading Current
Electrical Safety
Test Instruments
Compatibility with 6310 Series
The 6310A series load modules are compatible with the 6310
series mainframes. However certain new features and functions
will not be available when using the 6310A modules in the
6310 mainframes. This provides a cost savings for our existing
customers.
Passive Component
Test Instruments
Versatile System Configuration
Chroma 6310A Programmable Electronic Load integrates
microprocessor capability into each load module and mainframe
to provide simple and accurate parallel operation to optimize the
speed and control among multiple load modules. All load modules
may be configured to work synchronously, to test multiple outputs
simultaneously, thus simulating real life applications.
Timing Function
The 6310A series loads include a unique timing & measurement
function, which allows precise time measurements in the range
of 1ms to 86,400s. This feature allows the user to set the final
voltage & timeout values for battery discharge testing and other
similar applications.
Optical Inspection
Equipment
Real time measurement of voltage and current are integrated into
each 6310A load module using a 15-bit precision measurement
circuit. The user can perform on line voltage measurements and
adjustments or simulate short circuit test using the user friendly
keypad on the front panel. Additionally, the 6310A series offers an
optional remote controller for automated production lines.
Video & Color
Test Equipment
■ Parallel load modules up to 1200W for high current and power
application
■ Synchronization with multiple loads
■ Flexible CC, CR, CP and CV operation modes
■ Dynamic loading with speeds up to 20kHz
■ Fast response of 0.32mA/µs~10A/µs slew rate
■ Minimum input resistance allowing load to sink high current
at low voltage
■ Real time power supply load transient response simulation and
output measurement
■ User programmable 100 sequences. Front panel input status
for user-friendly operating
■ High/Low limits of testing parameters to test GO/NG
■ Digital I/O control
■ Over current protection (OCP) testing function
■ 15-bit precision voltage and current measurement with
dual-range
■ Remote sensing capability
■ Short circuit test
■ Self-test at power-on
■ Full Protection: OV, OC, OP and OT
■ USB, GPIB & RS-232C interfaces
LCD/LCM
Test Equipment
■ Max Power: 200W, 100W×2(Dual), 30W & 250W, 300W,
600W, 1200W
■ Wide range 0~500V operating voltage
■ Compatibility between 6310 and 6310A
■ Up to 8 channels in one mainframe, for testing multiple
output SMPS
LED
Test Equipment
KEY FEATURES
The 6310A series offers 8 types of modular loads with power
ratings from 100 watts to 1,200 watts, current ratings from 0.5mA
to 240A, and voltage ratings from 0.5mV to 500V. The loads
can be operated in constant current, constant voltage, constant
power and constant resistance and may be placed in parallel for
increased current and power.
Module Load Design
The Chroma 6314A 1200W and 6312A 600W electronic load
mainframes accept the user-installable 6310A series load modules
for easy system configuration and will mount in a 19" instrument
rack. The 6314A holds up to four 63102A load modules, which
will result in an 8-channel 100W/channel load with standard
front-panel inputs. This makes it ideal for testing multiple output
switching power supplies and multiple DC-DC converters. There
are also higher wattage modules that may be mixed and matched
for an even more versatile system. Additionally, the GO/NG
output port is useful for UUT's pass/fail testing on an automated
production line. All modules on the 6314A/6312A mainframe
share a common GPIB address to synchronize and speed up the
control of the load modules and the read-back of data.
Semiconductor/IC
Test Equipment
The Chroma 6310A series Programmable DC Electronic Load is
suitable for the test and evaluation of multi-output AC/DC power
supplies, DC/DC converters, chargers and power electronic
components. It is ideal for applications in research and
development, production, and incoming inspection. The system is
configured by plugging the user selectable load modules into the
system mainframe. The user interfaces include an ergonomically
designed user friendly keypad on the front panel and the following
computer interfaces: RS-232C, USB or GPIB.
DC Electronic Load
Model 6310A Series
Solar Cell
Test Equipment
USB
Model No.
Programmable DC Electronic Load
Time
Battery Discharge Testing
Dynamic Simulation
OCP Testing
Battery Pack Testing
PXI Instruments
& Systems
Main Operation Menu
General Purpose
Test Instruments
Soft Panel :
Battery Discharge Testing
• Continued on next page ➟
All specifications are subject to change without notice.
11-8
Application of Specific Load Simulation
The 6310A load modules operate in constant current, constant
voltage, constant power or constant resistance to satisfy a wide
range of test requirements. For example, the test of a battery
charger can be simulated easily by setting the load to operate in
constant voltage.
V
Load 1
rise rate
I
T1
Constant Resistance Mode
V
I
I
Constant Voltage Mode
Constant Power Mode
Each load module is designed with state-of-the-art technology and
connects all power MOSFET devices parallel to insure high accuracy
load control with a minimum drift of less than 0.1%+0.1%F.S. of the
current setting. Chroma's use of FET technology provides minimum
input resistance and enables the load to sink high current even at
very low voltage. For example, the model 63103A is capable of
sinking 60A at 1V output, and well-suited for testing the new 3.3V
low voltage power supplies. Low voltage operation, down to zero
volts, is possible at reduced current levels.
Model 63103A Input Characteristics
80V
fall rate
Load 2
I
V
6310A Series
Dynamic Loading and Control
Modern electronic devices operate at very high speeds and require
fast dynamic operation of their power providing components.
To satisfy these testing applications, the 6310A loads offer high
speed, programmable dynamic load simulation and control
capability. The figure below shows the programmable parameters
of the 6310A modules:
V
Constant Current Mode
Model No.
Programmable DC Electronic Load
T2
The programmable slew rate makes the simulation of transient
load change demanded by real life applications possible. The
6310A internal waveform generator is capable of producing a
maximum slew rate at 10A/µs, and dynamic cycling up to 20kHz.
It's dedicated remote load sense and control circuit guarantee
minimum waveform distortion during continuous load changes.
Parallel Control
The 6310A provides parallel control, which enables high power
testing when a single module can not meet the requirement of high
power applications. Two or more load modules can be paralleled
together to achieve the desired loading. The 6310A comes with
RS-232C as standard for remote control and automated testing
applications, with USB and GPIB interfaces as optional items.
Digital I/O
Digital I/O interface makes the 6310A DC Load the ideal choice for
automated testing requirements. Through the digital I/O, the 6310A
can accept digital signals to trigger its functions (Load On/Off, OCP
test, etc.) as well as current output status signals.
ORDERING INFORMATION
6312A : Mainframe for 2 Load Modules
6314A : Mainframe for 4 Load Modules
63101A : Load Module 40A/80V/200W
63102A : Load Module 20A/80V/100Wx2 channels
63103A : Load Module 60A/80V/300W
63105A : Load Module 10A/500V/300W
63106A : Load Module 120A/80V/600W
63107A : Load Module 5A&40A/80V/30W&250W
63108A : Load Module 20A/500V/600W
63112A : Load Module 240A/80V/1200W
A630002 : GPIB Interface for Model 6314A/6312A Mainframe
A631003 : USB Interface for Model 6314A/6312A Mainframe
A631001 : Remote Controller
A631002 : Test Fixture
A631005 : Softpanel for 6310A/6330A series
6310A Series DC Electronic Load Family
In addition, the 6310A, through its synchronized controls,
provides an efficient solution for testing single output AC to DC or
DC to DC converters by controlling multiple loads, testing up to 8
UUTs at a time.
63106A / 63108A
63103A
70V
Voltage
60V
50V
40V
30V
20V
10V
0
3.75A
10A
20A
30A
40A
50A
60A
Ampere
240A
Low Voltage Characteristics (Typical)
Model 63101A/63102A/63103A/63106A/63112A
63112A
220A
200A
180A
160A
140A
120A
63106A
100A
80A
60A
63103A
40A
63101A
20A
Powerful Measurements
Each 6310A load module has an integrated 15-bit precision
A/D converter for voltage measurement with an accuracy of
0.05%+0.05% full scale. The built-in resistive load current
sensing circuit is capable of measuring current with an accuracy
of 0.1%+0.1% of full scale. Also, short circuit can be simulated.
All measurements are done using remote sensing to eliminate
any error due to voltage drop along the measurement path. The
user can also select a full scale range of voltage and current
measurement according to his applications requirements.
OCP Test
Modern switching power supplies are designed with over current
protection (OCP) circuitry; therefore, it is important to test the
OCP circuitry to make sure it is functioning within its designed
specifications. The 6310A series provides an easy and fast
solution for this testing.
By simply choosing the channel and setting the OCP parameters
(start current, end current, step current and dwell time) from the
front panel, the 6310A series provides a fast and easy to use OCP
testing solution. The 6310A series will automatically detect the
OCP point, making it an ideal solution for design verification as
well as on the production line.
63102A
The 6310A load module uses a photo coupler for isolation between
the output and control sections, thus each load is isolated and
floating. The user can use multiple load modules independently to
test multi-output power supplies, or parallel them for high power
testing applications.
63105A
6314A : 4 in 1 Mainframe
A630002 : GPIB Interface
6312A : 2 in 1 Mainframe
A631003: USB Inetrface
V
UUT Output Voltage
▃ Dwell Time
End Current
▃ Step Current
A631001:
Remote Controller
I
Start
Current
11-9
63101A
Amplitude
0 0.1V 0.2V 0.3V 0.4V 0.5V 0.6V 0.7V 0.8V 0.9V 1.0V 1.1V 1.2V 1.3V
Note: All specifications are measured at load input terminals.
(Ambient Temperature of +25℃)
63102A 63107A
63112A
Loading Current
Time
All specifications are subject to change without notice.
Model No.
Programmable DC Electronic Load 6310A Series
0~20A
5mA
0.1%+0.2%F.S.
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0~6A
1.5mA
0.1%+0.1%F.S.
0~60A
15mA
0.1%+0.2%F.S.
0~1A
0.25mA
0.1%+0.1%F.S.
0~10A
2.5mA
0.1%+0.2%F.S.
0~80V
300W
0~10A
0~500V
0.0375Ω~150Ω (200W/16V)
1.875Ω~7.5kΩ (200W/80V)
12 bits
150Ω: 0.1 + 0.2%
7.5kΩ: 0.01 + 0.1%
0.075Ω~300Ω (100W/16V)
3.75Ω~15kΩ (100W/80V)
12 bits
300Ω: 0.1 + 0.2%
15kΩ: 0.01 + 0.1%
0.025Ω~100Ω (300W/16V)
1.25Ω~5kΩ (300W/80V)
12 bits
100Ω: 0.1 + 0.2%
5kΩ: 0.01 + 0.1%
1.25Ω~5Ω (300W/125V)
50Ω~200kΩ (300W/500V)
12 bits
5kΩ: 20m + 0.2%
200kΩ:5m + 0.1%
0~80V
20mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~500V
125mV
0.05% ± 0.1%F.S.
0~20W
0~200W
5mW
50mW
0.5% ± 0.5%F.S.
0~20W
0~100W
5mW
25mW
0.5% ± 0.5%F.S.
0~30W
0~300W
7.5mW
75mW
0.5% ± 0.5%F.S.
0~30W
0~300W
7.5mW
75mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.64~160mA/µs
6.4~1600mA/µs
0.64mA/µs
6.4mA/µs
10µs (Typical)
0~4A
0~40A
1mA
10mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1mS+100ppm
0.32~80mA/µs
3.2~800mA/µs
0.32mA/µs
3.2mA/µs
10µs (Typical)
0~2A
0~20A
0.5mA
5mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.001~0.25A/µs
0.01~2.5A/µs
0.001A/µs
0.01A/µs
10µs (Typical)
0~6A
0~60A
1.5mA
15mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.16~40mA/µs
1.6~400mA/µs
0.16mA/µs
1.6mA/µs
24µs (Typical)
0~1A
0~10A
0.25mA
2.5mA
0.4%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~125V
0~500V
4mV
16mV
0.05% + 0.05%F.S.
0~4A
0~40A
0.125mA
1.25mA
1mA
10mA
0.1% + 0.1%F.S.
0~2A
0~20A
0.0625mA
0.625mA
0.5mA
5mA
0.1% + 0.1%F.S.
0~6A
0~60A
0.1875mA
1.875mA
1.5mA
15mA
0.1% + 0.1%F.S.
0~1A
0~10A
0.032mA
0.320mA
0.25mA
2.5mA
0.1% + 0.1%F.S.
≒20.8W
≒4.08A
≒20.8W
≒2.04A
≒31.2W
≒6.12A
≒31.2W
≒1.02A
≒312W
≒10.2A
Ω
Ω
≒85℃
≒85℃
≒85℃
≒81.6V
≒81.6V
≒510V
100kΩ (Typical)
-
≒20A
0V
≒0.075Ω
≒100W
100kΩ (Typical)
-
≒60A
0V
≒0.025Ω
≒300W
100kΩ (Typical)
-
≒10A
0V
≒1.25Ω
≒300W
100kΩ (Typical)
• Continued on next page ➟
All specifications are subject to change without notice.
11-10
PXI Instruments
& Systems
100PPM/℃ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
Supply from 6314A Mainframe
Supply from 6314A Mainframe
Supply from 6314A Mainframe
Supply from 6314A Mainframe
172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
0~40℃
0~40℃
0~40℃
0~40℃
CE
CE
CE
CE
General Purpose
Test Instruments
≒40A
0V
≒0.0375Ω
≒200W
Electrical Safety
Test Instruments
≒85℃
≒81.6V
-
Passive Component
Test Instruments
≒312W
≒61.2A
Power Supply
Test Equipment
≒104W
≒20.4A
Optical Inspection
Equipment
≒208W
≒40.8A
Video & Color
Test Equipment
Accuracy
Slew Rate
Resolution
Min. Rise Time
Current
Resolution
Current Accuracy
Measurement Section
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Current Accuracy
Protective Section
Over Power Protection
Over Current Protection
Over Temperature
Protection
Over Voltage Protection
General
Short Circuit
Current (CC)
Voltage (CV)
Resistance (CR)
Power (CP)
Input Resistance
(Load Off)
Temperature Coefficient
Power
Dimension (H x W x D)
Weight
Operating Range
EMC & Safety
0~2A
0.5mA
0.1%+0.1%F.S.
30W
0~1A
LCD/LCM
Test Equipment
T1 & T2
0~40A
10mA
0.1%+0.2%F.S.
Ω
Ω
Accuracy
Constant Voltage Mode
Range
Resolution
Accuracy
Constant Power Mode
Range
Resolution
Accuracy
Dynamic Mode
Dynamic Mode
0~4A
1mA
0.1%+0.1%F.S.
63105A
300W
0~60A
Ω
Ω
Resolution
[email protected]
[email protected]
63103A
30W
0~6A
Ω
Ω
Range
0~80V
[email protected]
[email protected]
63102A (100Wx2)
20W
100W
0~2A
0~20A
0~80V
[email protected]
[email protected]
[email protected]
[email protected]
LED
Test Equipment
Constant Current Mode
Range
Resolution
Accuracy
Constant Resistance Mode
200W
0~40A
Semiconductor/IC
Test Equipment
Min. Operation Voltage (DC) *1
(Typical)
63101A
20W
0~4A
Solar Cell
Test Equipment
SPECIFICATIONS-1
Model
Power
Current
Voltage
Model No.
Programmable DC Electronic Load
6310A Series
SPECIFICATIONS-2
Accuracy
Constant Voltage Mode
Range
Resolution
Accuracy
Constant Power Mode
Range
Resolution
Accuracy
Dynamic Mode
Dynamic Mode
T1 & T2
Accuracy
Slew Rate
Resolution
Min. Rise Time
Current
Resolution
Current Accuracy
Measurement Section
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Current Accuracy
Protective Section
Over Power Protection
Over Current Protection
Over Temperature
Protection
Over Voltage Protection
General
Short Circuit
Current (CC)
Voltage (CV)
Resistance (CR)
Power (CP)
Input Resistance(Load Off)
Temperature Coefficient
Power
Dimension (HxWxD)
Weight
0~5A
1.25mA
0.1%+0.1%F.S.
0~4A
1mA
0.1%+0.1%F.S.
0~40A
10mA
0.1%+0.2%F.S.
[email protected]
[email protected]
0~12A
3mA
0.1%+0.1%F.S.
0~120A
30mA
0.1%+0.2%F.S.
0~80V
12.5mΩ~ 50Ω (600W/16V)
0.625Ω~2.5kΩ (600W/80V)
12 bits
50Ω: 0.4 + 0.5%
2.5kΩ: 0.04 + 0.2%
Ω
Ω
Resolution
[email protected]
[email protected]
[email protected]
[email protected]
0.3Ω~1.2kΩ (30W/16V)
15Ω~60kΩ (30W/80V)
12 bits
1.2kΩ: 0.1 + 0.2%
60kΩ: 0.01 + 0.1%
Ω
Ω
Range
60W
0~2A
30W
0~5A
0~80V
20mV
0.05% ± 0.1%F.S.
0~60W
0~600W
15mW
150mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.002~0.5A/µs
0.02~5A/µs
0.002A/µs
0.02A/µs
10µs (Typical)
0~12A
0~120A
3mA
30mA
0.4%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~12A
0~120A
0.375mA
3.75mA
3mA
30mA
0.1% + 0.1%F.S.
≒62.4W
≒12.24A
-
≒624W
≒122.4A
0~30W
7.5mW
11-11
120W
0~24A
0.8~200mA/µs
0.8mA/µs
0~5A
1.25mA
0~16V
0.5mV
0~250W
62.5mW
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.64~160mA/µs
64~1600mA/µs
0.64mA/µs
64mA/µs
10µs (Typical)
0~4A
0~40A
1mA
10mA
0.4%F.S.
0~80V
0~16V
2.5mV
0.5mV
0.05% + 0.05%F.S.
1200W
0~240A
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0~2A
0.5mA
0.1%+0.1%F.S.
0~20A
5mA
0.1%+0.2%F.S.
0~24A
6mA
0.1%+0.1%F.S.
0~240A
60mA
0.1%+0.2%F.S.
0~500V
0.0375Ω~150Ω (250W/16V)
1.875Ω~7.5kΩ (250W/80V)
12 bits
150Ω: 0.1 + 0.2%
7.5kΩ: 0.01 + 0.1%
0~30W
7.5mW
0.5% ± 0.5%F.S.
63112A
600W
0~20A
0~80V
2.5mV
0~80V
0.625Ω~2.5kΩ (600W/125V)
25Ω~100kΩ (600W/500V)
12 bits
25kΩ: 50m + 0.2%
100kΩ: 5m + 0.1%
6.25mΩ~25Ω (1200W/16V)
0.3125Ω~1.25kΩ (1200W/80V)
12 bits
25Ω: 0.8 + 0.8%
1.25kΩ: 0.08 + 0.2%
0~500V
125mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~60W
0~600W
15mW
150mW
0.5% ± 0.5%F.S.
0~120W
0~1200W
30mW
300mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.32~80mA/µs
3.2~800mA/µs
0.32mA/µs
3.2mA/µs
24µs (Typical)
0~2A
0~20A
0.5mA
5mA
0.4%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.004~1A/µs
0.04~10A/µs
0.004A/µs
0.04A/µs
10µs (Typical)
0~24A
0~240A
6mA
60mA
0.4%F.S.
0~125V
0~500V
4mV
16mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~24A
0~240A
0.75mA
7.5mA
6mA
60mA
0.15% + 0.15%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~5A
0.15625mA
1.25mA
0~4A
0.125mA
1mA
0.1% + 0.1%F.S.
0~40A
1.25mA
10mA
0~2A
0~20A
0.375mA
0.625mA
0.5mA
5mA
0.1% + 0.1%F.S.
≒31.2W
≒5.1A
≒31.2W
≒4.08A
≒260W
≒40.8A
≒62.4W
≒2.04A
≒624W
≒20.4A
≒124.8W
≒24.48A
≒1248W
≒244.8A
≒85℃
≒85℃
≒85℃
≒85℃
≒81.6V
≒81.6V
≒510V
≒81.6V
≒120A
0V
≒0.0125Ω
≒600W
100kΩ (Typical)
100PPM/℃ (Typical)
Supply from 6314A Mainframe
172 x 162 x 495 mm / 6.8 x 6.4 x 19.5 inch
8.4 kg / 18.5 lbs
-
≒40A
0V
≒0.0375Ω
≒250W
100kΩ (Typical)
100PPM/℃ (Typical)
Supply from 6314A Mainframe
172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch
4.5 kg / 9.9 lbs
Operating Range
0~40℃
EMC & Safety
CE
NOTE*1 :
Low voltage operation, under 0.8 volt, is possible at correspondingly reduced current level.
Operating temperature range is 0ºC to 40ºC. All specifications apply for 25ºC±5ºC, except as noted
Mainframe Model
Dimension (HxWxD)
Weight
63108A
Ω
Ω
Constant Current Mode
Range
Resolution
Accuracy
Constant Resistance Mode
250W
0~40A
[email protected]
[email protected]
63107A (30W & 250W)
30W
0~4A
0~80V
[email protected]
[email protected]
600W
0~120A
Ω
Ω
Min. Operation Voltage (DC) *1
(Typical)
63106A
60W
0~12A
Ω
Ω
Model
Power
Current
Voltage
6312A
177 x 275 x 543 mm / 7 x 10.8 x 21.4 inch
15 kg / 33.1 lbs
0~40℃
CE
-
≒20A
≒240A
0V
0V
≒0.625Ω
≒0.00625Ω
≒600W
≒1200W
100kΩ (Typical)
100kΩ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
Supply from 6314A Mainframe
Supply from 6314A Mainframe
172 x 162 x 495 mm / 6.8 x 6.4 x 19.5 inch 172 x 324 x 495 mm/6.8 x 12.8 x 19.5 inch
8.4 kg / 18.5 lbs
16.8 kg / 37 lbs
0~40℃
CE
0~40℃
CE
6314A
177 x 439 x 543 mm / 7 x 17.3 x 21.4 inch
22 kg / 48.5 lbs
All specifications are subject to change without notice.
Model No.
High Power DC Electronic Load
GPIB
SPECIFICATIONS-1
Min. Operating voltage
63202
260W
0~30A
2600W
0~300A
260W
0~5A
0.5V @ 15A
1V @ 30A
0.5V @ 150A
1V @ 300A
0~30A
7.5mA
0.1%+0.1%F.S.
63203
2600W
0~50A
520W
0~60A
1.25V @ 2.5A
2.5V @ 5A
1.25V @ 25A
2.5V @ 50A
0.5V @ 30A
1V @ 60A
0.5V @ 300A
1V @ 600A
0~300A
75mA
0.2%+0.1%F.S.
0~5A
1.25mA
0.1%+0.1%F.S.
0~50A
12.5mA
0.2%+0.1%F.S.
0~60A
15mA
0.1%+0.1%F.S.
0~600A
150mA
0.2%+0.1%F.S.
0.005~20ohm
12bits
0.6mho+0.35%
0.6mho+0.35%
0.25~1000ohm
12bits
0.9mho+0.1%
0.012mho+0.35%
0.25~1000ohm
12bits
0.012mho+0.35%
0.012mho+0.35%
10~40000ohm
12bits
0.04mho+0.1%
112.5u mho+0.35%
0.0025~10ohm
12bits
1.2mho+0.35%*4
1.2mho+0.35%
0.125~500ohm
12bits
1.2mho+0.1%
0.024mho+0.35%
0~16V
4mV
0.05%+0.1%F.S.
0~80V
20mV
0.05%+0.1%F.S.
0~125V
31mV
0.05%+0.1%F.S.
0~500V
125mV
0.05%+0.1%F.S.
0~16V
4mV
0.05%+0.1%F.S.
0~80V
20mV
0.05%+0.1%F.S.
0.6~260W
7.5mW
0.5%+0.5%F.S.
6~2600W
75mW
0.5%+0.5%F.S.
0.625~260W
3.125mW
0.5%+0.5%F.S.
6.25~2600W
31.25mW
0.5%+0.5%F.S.
1.2~520W
22.5mW
0.5%+0.5%F.S.
12~5200W
225mW
0.5%+0.5%F.S.
0.025~10ms
1µs
1µs+100ppm
5mA~1.25A/µs
5mA/µs
1ms~30s
1ms
1ms+100ppm
50mA~12.5A/µs
50mA/µs
0.025~10ms
1µs
1µs+100ppm
0.8mA~0.2A/µs
0.8mA/µs
1ms~30s
1ms
1ms+100ppm
8mA~2A/µs
8mA/µs
0.025~10ms
1µs
1µs+100ppm
10mA~2.5A/µs
10mA/µs
1ms~30s
1ms
1ms+100ppm
100mA~25A/µs
100mA/µs
0~80V
5200W
0~600A
0~500V
0~5A
1.25mA
0.4%F.S.
0~16V
15bits
0~125V
15bits
0~60A
15mA
0.4%F.S.
0~500V
15bits
0~16V
15bits
0.05%+0.05%F.S.
0~300A
15bits
0~5A
15bits
0.1%+0.1%F.S.
0~50A
15bits
0~260W
15bits
0~80V
15bits
0.05%+0.05%F.S.
0~60A
15bits
0.1%+0.1%F.S.
0~2600W
15bits
0~600A
150mA
General Purpose
Test Instruments
0.05%+0.05%F.S.
0~260W
15bits
0~50A
12.5mA
0.4%F.S.
0~80V
15bits
0~30A
15bits
24µs (typical)
Electrical Safety
Test Instruments
0~300A
75mA
Passive Component
Test Instruments
0~30A
7.5mA
24µs (typical)
Power Supply
Test Equipment
24µs (typical)
0~80V
Optical Inspection
Equipment
0~600A
15bits
0.1%+0.1%F.S.
0~2600W
15bits
0~520W
15bits
0~5200W
15bits
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0.3%+0.3%F.S.
30A
300A
177 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
30 kg / 66.08 lbs
CE
5A
50A
177 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
30 kg / 66.08 lbs
CE
60A
600A
353 x 440 x 589 mm / 6.9 x 17.3 x 23.2 inch
62 kg / 136.56 lbs
CE
PXI Instruments
& Systems
Constant Current mode
Range
Resolution
Accuracy
Constant Resistance Mode
Range
Resolution
Accuracy*2
Accuracy*3 (Vin>7V)
Constant Voltage mode
Range
Resolution
Accuracy
Constant Power mode
Range
Resolution
Accuracy
Dynamic mode
Timing
T1&T2
Resolution
Accuracy
Slew rate
Resolution
Min. Rise Time
Current
Range
Resolution
Accuracy
Measurement
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Power Read Back
Range
Resolution
Accuracy
General
Short Circuit
current
Dimension (H x W x D)
Weight
Safety & EMC
63201
Chroma 63200 series loads are built in fan speed control to
minimize the audio noise. The self-diagnosis routine and the full
protections against OPP, OCP, OVP, OTP and reverse polarity
ensure the best quality and reliability.
Video & Color
Test Equipment
SPECIFICATIONS-1
Model
Power*1
Current
Voltage
The 63200 series offers 10 different models with power range from
2600 watts to 15600 watts, current from 50A to 1000A and up to
500V input voltage. The 4 load modes setup provide different load
simulations for various application occasions. The CC/CR modes
are designed to test constant voltage type of power supply. CV
mode is used to test battery charger and current source, while CP
mode is ideal for battery testing by simulating the real discharge
curve.
• Continued on next page ➟
All specifications are subject to change without notice.
LCD/LCM
Test Equipment
KEY FEATURES
■ Power Rating: 2.6kW, 5.2kW, 6.5kW, 10.4kW, 14.5kW, 15.6kW
■ Voltage range: 0~80V/0~500V
■ Current range: Up to 1000A
■ CC, CR, CV, CP load modes
■ Master/Slave paralleling control mode, allow synchronous
load control under static and dynamic loading mode
■ Dynamic loading: Up to 20kHz
■ Only need 1V to draw rated current
■ Programmable slew rate, up to 41A/µs
The 63200 series also supply necessary measurement functions
and short circuit simulation that extend the test capability for even
the most demanding engineering tests and ATE applications.
With the LCD display and rotary knob, the 63200 electronic loads
offer versatile front panel operations. Users are able to control
the 63200 family remotely via GPIB, RS-232 or APG (Analog
Programming) interface.
LED
Test Equipment
The Chroma Electronic Loads 63200 series are designed for DC
power source, power electronic devices and components testing.
The high power rating, parallel and synchronization capabilities
make them the ideal tool for testing the high power UUT such as
SMR,UPS, battery, and fuel cell.
DC Electronic Load
Model 63200 Series
The 63200 series can draw its rated current under very low
voltage (1V typical) even under the highest specified slew rate.
This unique feature guarantees the best loading performance to
a low voltage power supply. With the unique external waveform
simulation and Master /Slave control capability, the 63200 series
electronic loads allow users to parallel and synchronize more
than one load together from an internal or external loading control
signal. This feature provides unlimited load simulation and the
possibility of power expansion.
Semiconductor/IC
Test Equipment
■ Measurement: Voltage / Current / Power/ Resistance
■ Large LED/LCD display
■ External loading waveform simulation
■ Short circuit simulation and short circuit current
measurement
■ Full protection: OP, OC, OV, OT and reverse protection
■ Versatile remote controller
■ GPIB & RS-232 interfaces
Solar Cell
Test Equipment
RS-232
63200 Series
11-12
Model No.
High Power DC Electronic Load
63200 Series
SPECIFICATIONS-2
Model
63204
63205
63206
Power*1
520W
5200W
650W
6500W
1040W
Current
0~10A
0~100A
0~18A
0~180A
0~60A
Voltage
0~500V
10400W
0~600A
0~80V
0~80V
1.25V @ 5A
1.25V @ 50A
0.5V @ 9A
0.5V @ 90A
0.5V @ 30A
0.5V @ 300A
2.5V @ 10A
2.5V @ 100A
1V @ 18A
1V @ 180A
1V @ 60A
1V @ 600A
Range
0~10A
0~100A
0~18A
0~180A
0~60A
0~600A
Resolution
2.5mA
25mA
4.5mA
45mA
15mA
150mA
0.1%+0.1%F.S.
0.2%+0.1%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.125~500ohm
Min. Operating voltage
Constant Current mode
Accuracy
Constant Resistance Mode
Range
0.125~500ohm
5~20000ohm
0.008~32ohm
0.4~1600ohm
0.0025~10ohm
Resolution
12bits
12bits
12bits
12bits
12bits
12bits
Accuracy*2
0.24mho+0.1%
0.08mho+0.1%
0.375mho+0.35%
0.75mho+0.1%
1.2mho+0.35% *4
1.2mho+0.1%
Accuracy*3 (Vin>7V)
0.24mho+0.1%
225u mho+0.35%
0.375mho+0.35%
0.075mho+0.35%
1.2mho+0.35%
0.024mho+0.35%
0~125V
0~500V
0~16V
0~80V
0~16V
0~80V
31mV
125mV
4mV
20mV
4mV
20mV
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
1.25~520W
12.5~5200W
0.36~650W
3.6~6500W
1.2~1040W
12~10400W
6.25mW
62.5mW
4.6mW
46mW
22.5mW
225mW
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
1ms~30s
Constant Voltage mode
Range
Resolution
Accuracy
Constant Power mode
Range
Resolution
Accuracy
Dynamic mode
Timing
T1&T2
0.025~10ms
1ms~30s
0.025~10ms
1ms~30s
0.025~10ms
Resolution
1µs
1ms
1µs
1ms
1µs
1ms
Accuracy
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
Slew rate
1.6mA~0.4A/µs
16mA~4A/µs
3mA~0.75A/µs
30mA~7.5A/µs
10mA~3A/µs
100mA~25A/µs
Resolution
1.6mA/µs
16mA/µs
3mA/µs
30mA/µs
12mA/µs
Min. Rise Time
24µs (typical)
24µs (typical)
100mA/µs
20µs (typical)
Current
Range
0~10A
0~100A
0~18A
0~180A
0~60A
Resolution
2.5mA
25mA
4.68mA
46.8mA
15mA
Accuracy
0.4%F.S.
0.4%F.S.
0~600A
150mA
0.4%F.S.
Measurement
Voltage Read Back
Range
0~125V
0~500V
0~16V
0~80V
0~16V
Resolution
15bits
15bits
15bits
15bits
15bits
Accuracy
0.05%+0.05%F.S.
0.05%+0.05%F.S.
0~80V
15bits
0.05%+0.05%F.S.
Current Read Back
Range
0~10A
0~100A
0~18A
0~180A
0~60A
Resolution
15bits
15bits
15bits
15bits
15bits
Accuracy
0.1%+0.1%F.S.
0.1%+0.1%F.S.
0~600A
15bits
0.1%+0.1%F.S.
Power Read Back
Range
Resolution
0~520W
0~5200W
0~650W
0~6500W
0~1040W
15bits
15bits
15bits
15bits
15bits
Accuracy
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0~10400W
15bits
0.3%+0.3%F.S.
General
Short Circuit
Current
Dimension (H x W x D)
Weight
Safety & EMC
10A
100A
18A
180A
60A
600A
353 x 440 x 589 mm / 13.9 x 17.3 x 23.2 inch
353 x 440 x 589 mm / 13.9 x 17.3 x 23.2 inch
443.7 x 440 x 589 mm / 17.5 x 17.3 x 23.2 inch
62 kg / 136.56 lbs
62 kg / 136.56 lbs
90 kg / 198.24 lbs
CE
CE
CE
Soft Panel
63200 Series DC Electronic Load Family
63208/63209/63210
63201/63202
Battery Discharge Test
OCP Test
63205
11-13
63206/63207
63203/63204
All specifications are subject to change without notice.
Model No.
High Power DC Electronic Load
63200 Series
Model
63207
63208
63209
63210
Power *1
1040W
10400W
1560W
15600W
1560W
15600W
1450W
Current
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
Voltage
0~80V
0~80V
14500W
0~150A
0~80V
0~500V
0.5V @ 30A
0.5V @ 300A
0.5V @ 50A
0.5V @ 500A
1.25V @ 7.5A
1.25V @ 75A
1V @ 300A
1V @ 60A
1V @ 600A
1V @ 100A
1V @ 1000A
2.5V @ 15A
2.5V @ 150A
Range
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
0~150A
Resolution
9.3mA
75mA
15mA
150mA
31.25mA
250mA
3.75mA
37.5mA
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.2%F.S.
0.1%+0.1%F.S.
0.2%+0.1%F.S.
3.3~13200ohm
Constant Current mode
Accuracy
Constant Resistance Mode
Range
0.0025~10ohm
0.125~500ohm
0.0015~6ohm
0.075~300ohm
0.083~333ohm
12bits
12bits
12bits
12bits
12bits
12bits
12bits
Accuracy *2
0.6mho+0.35%
0.9mho+0.1%
1.2mho+0.35% *4
1.2mho+0.1%
1.2mho+0.35% *4
1.2mho+0.1%
0.036mho+0.35%
0.092mho+0.1%
Accuracy *3 (Vin>7V)
0.6mho+0.35%
0.012mho+0.35%
1.2mho+0.35%
0.024mho+0.35%
1.2mho+0.35%
0.024mho+0.35%
0.036mho+0.35%
337.5u mho+0.35%
0~16V
0~80V
0~16V
0~80V
0~16V
0~80V
0~125V
0~500V
4mV
20mV
4mV
20mV
4mV
20mV
31mV
125mV
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.05%+0.1%F.S.
0.744~1040W
6~10400W
1.2~1560W
12~15600W
2.5~1560W
20~15600W
5~1450W
50~14500W
9.3mW
75mW
22.5mW
225mW
31.255mW
250mW
25mW
250mW
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
0.5%+0.5%F.S.
1ms~30s
Constant Voltage mode
Range
Resolution
Accuracy
Constant Power mode
Range
Resolution
Accuracy
Dynamic mode
Timing
T1&T2
1ms~30s
0.025~10ms
1ms~30s
0.025~10ms
1ms~30s
0.025~10ms
1µs
1ms
1µs
1ms
1µs
1ms
1us
1ms
Accuracy
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
1µs+100ppm
1ms+100ppm
1us+100ppm
1ms+100ppm
Slew rate
6mA~1.5A/µs
50mA~12.5A/µs
12mA~3A/µs
100mA~25A/µs
20mA~5A/µs
166mA~41.6A/µs
3mA~0.75A/µs
25mA~6A/µs
Resolution
6mA/µs
50mA/µs
12mA/µs
100mA/µs
20mA/µs
166mA/µs
3mA/us
25mA/us
Min. Rise Time
20µs (typical)
20µs (typical)
20µs (typical)
24 µs (typical)
Current
Range
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
0~150A
Resolution
9.37mA
75mA
15mA
150mA
31.25mA
250mA
3.75mA
37.5mA
Accuracy
0.4%F.S.
0.4%F.S.
0.4%F.S.
0.4%FS
Measurement
Range
0~16V
0~80V
0~16V
0~80V
0~16V
0~80V
0~125V
0~500V
Resolution
15bits
15bits
15bits
15bits
15bits
15bits
15 bits
15 bits
Accuracy
0.05%+0.05%F.S.
0.05%+0.05%F.S.
0.05%+0.05%F.S.
0.05%+0.05%F.S.
Current Read Back
Range
0~30A
0~300A
0~60A
0~600A
0~100A
0~1000A
0~15A
Resolution
15bits
15bits
15bits
15bits
15bits
15bits
15bits
0.1%+0.1%F.S.
0.1%+0.1%F.S.
0.1%+0.1%F.S.
15bits
0.1%+0.1%F.S.
Power Read Back
Range
Resolution
0~1040W
0~10400W
0~1560W
0~15600W
0~1560W
0~15600W
0~1450W
15bits
15bits
15bits
15bits
15bits
15bits
15bits
Accuracy
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0.3%+0.3%F.S.
0~14500W
15bits
0.3%+0.3%F.S.
General
Short Circuit
Dimension (H x W x D)
Weight
Safety & EMC
30A
300A
60A
600A
100A
1000A
15A
150A
443.7 x 440 x 589 mm / 17.5 x 17.3 x 23.2 inch
762.8 x 546 x 700 mm / 30 x 21.5 x 27.6 inch
762.8x546x700mm/30x21.5x27.6inch(cabinet)
762.8x546x700mm/30x21.5x27.6inch(cabinet)
90 kg / 198.24 lbs
170 kg / 374.45 lbs
170 kg / 374.45 lbs
170 kg / 374.45 lbs
CE
CE
CE
CE
General Purpose
Test Instruments
Note*1 : The power rating specifications at ambient temperature=25℃ and see the diagram below for power derating.
Note*2 : The Vin must be greater that min. operating voltage of each model.
Note*3 : The Vin must be greater that 7V of each model.
Note*4 : Setting error will be 1% for R<0.005Ω at CRL range.
ORDERING INFORMATION
All specifications are subject to change without notice.
63209 : DC Electronic Load 15.6kW/1000A/80V
63210 : DC Electronic Load 14.5kW/150A/500V
A632001 : Remote Controller
A632002 : Load Cable 38mm/242A/200cmx2
A632003 : Load Cable 80mm/390A/200cmx2
A632004 : Sync. Link Box for 6330A & 63200 series
A632005 : Softpanel for 63200 series
PXI Instruments
& Systems
63201 : DC Electronic Load 2.6kW/300A/80V
63202 : DC Electronic Load 2.6kW/50A/500V
63203 : DC Electronic Load 5.2kW/600A/80V
63204 : DC Electronic Load 5.2kW/100A/500V
63205 : DC Electronic Load 6.5kW/180A/80V
63206 : DC Electronic Load 10.4kW/600A/80V
63207 : DC Electronic Load 10.4kW/300A/80V
63208 : DC Electronic Load 15.6kW/600A/80V
Electrical Safety
Test Instruments
Current
Passive Component
Test Instruments
Accuracy
0~150A
Power Supply
Test Equipment
Voltage Read Back
Optical Inspection
Equipment
0.025~10ms
Resolution
Video & Color
Test Equipment
0.25~1000ohm
12bits
LCD/LCM
Test Equipment
0.005~20ohm
Resolution
LED
Test Equipment
0.5V @ 150A
1V @ 30A
Semiconductor/IC
Test Equipment
0.5V @ 15A
Min. Operating voltage
Solar Cell
Test Equipment
SPECIFICATIONS-3
A632001
11-14
USB
RS-232
Model No.
High Speed DC Electronic Load
6330A Series
GPIB
Chroma Model 6330A series high speed DC electronic improves
CPU clock, baud rate, parser and added synchronic parallel
function for fast operation, which is ideal for auto test system
integration to increase your manufacturing test throughput.
Plugging the user selectable load modules into the system
mainframe can also provide easy system configuration and future
reconfiguration configure the system.
High Speed DC Load
Model 6330A Series
KEY FEATURES
■ Improve operating speeds of load for auto test system
integration
■ Synchronous paralleling control mode, allow Synchronous
load control under static and dynamic Loading mode up to
6000W
■ Up to 8 channels in one mainframe, fit for testing Multiple
output SMPS.
■ GPIB/RS-232/USB Interface
■ Max Power: 200W, 100W x 2(Dual), 30W&250W, 300W,
600W, 1200W
■ Voltage Range: 0~80V / 0V~500V
■ CC, CR, CV, CP operating modes
■ Dynamic loading with speed up to 20kHz
■ Programmable slew rate, up to 10A/µs
■ Only need 1V to draw rated current
■ Individual panel meters
■ Real time power supplies load transient response simulation
and output measurement
■ 15-bit precision voltage and measurement with dual-range
selection
■ Remote sensing capability
■ Short circuit test
■ Self-test at power-on
■ CE marking
The 6330A family offers 8 types of modular loads with power
ranging from 30 watts to 1200 watts, current from 0.5mA to
240A, and voltage measurement from 0.5mV to 500V. Each load
is isolated and floating, programmable in dual current range and
measuring voltage range, and capable of synchronizing with
other modules for control operating. The load can be operated in
constant current, constant voltage, and constant resistance.
With Synchronic parallel control capability, 6330A series loads
allow users to parallel and synchronize more than one load
together from an internal loading control signal. This feature
provides synchronic dynamic loading test for multi-output power
and high power test solution.
The 6330A have self-diagnosis routine to maintain instrumental
performance all the time. It is also protected against OP, OC, OV,
OT, and reverse polarity to guarantee quality and reliability for even
the most demanding engineering testing and ATE application.
63306A / 63308A
63303A
63302A 63307A
63312A
63301A
63305A
6330A Series High Speed DC Electronic Load Family
The FET technology accomplishes minimum input resistance and
enables the load to sink high current even at very low voltage.
For example, model 63303A is capable of sinking 60A at 1V
output, and well-suited for testing the new 3V low voltage power
supplies. Low voltage operation, down to zero volt, is possible at
correspondingly reduced current level. (see below)
MODEL 63303A INPUT CHARACTERISTICS
voltage
63312A
220A
6332A: Mainframe for 2 Load Modules
6334A: Mainframe for 4 Load Modules
63301A: Load Module 40A/80V/200W
63302A: Load Module 20A/80V/100Wx2 channels
63303A: Load Module 60A/80V/300W
63305A: Load Module 10A/500V/300W
63306A: Load Module 120A/80V/600W
63307A: Load Module 5A&40A/80V/30W&250W
63308A: Load Module 20A/500V/600W
63312A: Load Module 240A/80V/1200W
A630002: GPIB Interface for Model 6334A/6332A Mainframe
A631003 : USB Interface for Model 6334A/6332A Mainframe
A631001: Remote Controller
A631002: Test Fixture
A631005: Softpanel for 6310A/6330A series
A632004: Sync. Link Box for 6330A/63200 Series
Real time measurement of voltage, current, is integrated into
each 6330A load module using a 15-bit precision measurement
circuit. The user can perform on line voltage measurement and
adjustment, or simulate short circuit test using the simple keypad
on the front panel.
LOW VOLTAGE CHARACTERISTICS (TYPICAL)
OF 63301A/63302A/63303A/63306A/63312A
240A
ORDERING INFORMATION
6334A: 4 in 1 Mainframe
A630002: GPIB
Interface
6332A: 2 in 1 Mainframe
A631001: Remote
Controller
80
200A
180A
160A
140A
120A
63306A
100A
80A
3.75
60A
63303A
40A
Ampere
63301A
63302A
0 0.1V 0.2V 0.3V 0.4V 0.5V 0.6V 0.7V 0.8V 0.9V 1.0V 1.1V 1.2V 1.3V
Note: All specifications are measured at load input terminals. (Ambient Temperature of +25℃)
11-15
All specifications are subject to change without notice.
0~20A
5mA
0.1%+0.2%F.S.
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0~6A
1.5mA
0.1%+0.1%F.S.
0~60A
15mA
0.1%+0.2%F.S.
0~1A
0.25mA
0.1%+0.1%F.S.
0~10A
2.5mA
0.1%+0.2%F.S.
0~80V
300W
0~10A
0~500V
0.0375Ω~150Ω (200W/16V)
1.875Ω~7.5kΩ (200W/80V)
12 bits
150Ω: 0.1 + 0.2%
7.5kΩ: 0.01 + 0.1%
0.075Ω~300Ω (100W/16V)
3.75Ω~15kΩ (100W/80V)
12 bits
300Ω: 0.1 + 0.2%
15kΩ: 0.01 + 0.1%
0.025Ω~100Ω (300W/16V)
1.25Ω~5kΩ (300W/80V)
12 bits
100Ω: 0.1 + 0.2%
5kΩ: 0.01 + 0.1%
1.25Ω~5Ω (300W/125V)
50Ω~200kΩ (300W/500V)
12 bits
5kΩ: 20m + 0.2%
200kΩ:5m + 0.1%
0~80V
20mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~500V
125mV
0.05% ± 0.1%F.S.
0~20W
0~200W
5mW
50mW
0.5% ± 0.5%F.S.
0~20W
0~100W
5mW
25mW
0.5% ± 0.5%F.S.
0~30W
0~300W
7.5mW
75mW
0.5% ± 0.5%F.S.
0~30W
0~300W
7.5mW
75mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.64~160mA/µs
6.4~1600mA/µs
0.64mA/µs
6.4mA/µs
10µs (Typical)
0~4A
0~40A
1mA
10mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1mS+100ppm
0.32~80mA/µs
3.2~800mA/µs
0.32mA/µs
3.2mA/µs
10µs (Typical)
0~2A
0~20A
0.5mA
5mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.001~0.25A/µs
0.01~2.5A/µs
0.001A/µs
0.01A/µs
10µs (Typical)
0~6A
0~60A
1.5mA
15mA
0.4%F.S.
C.C. Mode
0.025ms ~ 50ms / Res: 5µs
0.1ms ~ 500ms / Res: 25µs
10ms ~ 50s / Res: 2.5ms
1µs/1ms+100ppm
0.16~40mA/µs
1.6~400mA/µs
0.16mA/µs
1.6mA/µs
24µs (Typical)
0~1A
0~10A
0.25mA
2.5mA
0.4%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~125V
0~500V
4mV
16mV
0.05% + 0.05%F.S.
0~4A
0~40A
0.125mA
1.25mA
1mA
10mA
0.1% + 0.1%F.S.
0~2A
0~20A
0.0625mA
0.625mA
0.5mA
5mA
0.1% + 0.1%F.S.
0~6A
0~60A
0.1875mA
1.875mA
1.5mA
15mA
0.1% + 0.1%F.S.
0~1A
0~10A
0.032mA
0.320mA
0.25mA
2.5mA
0.1% + 0.1%F.S.
≒20.8W
≒4.08A
≒20.8W
≒2.04A
≒31.2W
≒6.12A
≒31.2W
≒1.02A
≒312W
≒10.2A
Ω
Ω
≒85℃
≒85℃
≒85℃
≒81.6V
≒81.6V
≒510V
100kΩ (Typical)
-
≒20A
0V
≒0.075Ω
≒100W
100kΩ (Typical)
-
≒60A
0V
≒0.025Ω
≒300W
100kΩ (Typical)
-
≒10A
0V
≒1.25Ω
≒300W
100kΩ (Typical)
• Continued on next page ➟
All specifications are subject to change without notice.
11-16
PXI Instruments
& Systems
100PPM/℃ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
Supply from 6334A Mainframe
Supply from 6334A Mainframe
Supply from 6334A Mainframe
Supply from 6334A Mainframe
172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x81 x 495 mm / 6.8 x 3.2 x 19.5 inch 172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
4.2 kg / 9.3 lbs
0~40℃
0~40℃
0~40℃
0~40℃
CE
CE
CE
CE
General Purpose
Test Instruments
≒40A
0V
≒0.0375Ω
≒200W
Electrical Safety
Test Instruments
≒85℃
≒81.6V
-
Passive Component
Test Instruments
≒312W
≒61.2A
Power Supply
Test Equipment
≒104W
≒20.4A
Optical Inspection
Equipment
≒208W
≒40.8A
Video & Color
Test Equipment
Accuracy
Slew Rate
Resolution
Min. Rise Time
Current
Resolution
Current Accuracy
Measurement Section
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Current Accuracy
Protective Section
Over Power Protection
Over Current Protection
Over Temperature
Protection
Over Voltage Protection
General
Short Circuit
Current (CC)
Voltage (CV)
Resistance (CR)
Power (CP)
Input Resistance
(Load Off)
Temperature Coefficient
Power
Dimension (H x W x D)
Weight
Operating Range
EMC & Safety
0~2A
0.5mA
0.1%+0.1%F.S.
30W
0~1A
LCD/LCM
Test Equipment
T1 & T2
0~40A
10mA
0.1%+0.2%F.S.
Ω
Ω
Accuracy
Constant Voltage Mode
Range
Resolution
Accuracy
Constant Power Mode
Range
Resolution
Accuracy
Dynamic Mode
Dynamic Mode
0~4A
1mA
0.1%+0.1%F.S.
63305A
300W
0~60A
Ω
Ω
Resolution
[email protected]
[email protected]
63303A
30W
0~6A
Ω
Ω
Range
0~80V
[email protected]
[email protected]
63302A (100Wx2)
20W
100W
0~2A
0~20A
0~80V
[email protected]
[email protected]
[email protected]
[email protected]
LED
Test Equipment
Constant Current Mode
Range
Resolution
Accuracy
Constant Resistance Mode
200W
0~40A
Semiconductor/IC
Test Equipment
Min. Operation Voltage (DC) *1
(Typical)
63301A
20W
0~4A
6330A Series
Solar Cell
Test Equipment
SPECIFICATIONS-1
Model
Power
Current
Voltage
Model No.
High Speed DC Electronic Load
Model No.
High Speed DC Electronic Load
6330A Series
SPECIFICATIONS-2
Accuracy
Constant Voltage Mode
Range
Resolution
Accuracy
Constant Power Mode
Range
Resolution
Accuracy
Dynamic Mode
Dynamic Mode
T1 & T2
Accuracy
Slew Rate
Resolution
Min. Rise Time
Current
Resolution
Current Accuracy
Measurement Section
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Current Accuracy
Protective Section
Over Power Protection
Over Current Protection
Over Temperature
Protection
Over Voltage Protection
General
Short Circuit
Current (CC)
Voltage (CV)
Resistance (CR)
Power (CP)
Input Resistance(Load Off)
Temperature Coefficient
Power
Dimension (HxWxD)
Weight
0~5A
1.25mA
0.1%+0.1%F.S.
0~4A
1mA
0.1%+0.1%F.S.
0~40A
10mA
0.1%+0.2%F.S.
[email protected]
[email protected]
0~12A
3mA
0.1%+0.1%F.S.
0~120A
30mA
0.1%+0.2%F.S.
0~80V
12.5mΩ~ 50Ω (600W/16V)
0.625Ω~2.5kΩ (600W/80V)
12 bits
50Ω: 0.4 + 0.5%
2.5kΩ: 0.04 + 0.2%
Ω
Ω
Resolution
[email protected]
[email protected]
[email protected]
[email protected]
0.3Ω~1.2kΩ (30W/16V)
15Ω~60kΩ (30W/80V)
12 bits
1.2kΩ: 0.1 + 0.2%
60kΩ: 0.01 + 0.1%
Ω
Ω
Range
60W
0~2A
30W
0~5A
0~80V
20mV
0.05% ± 0.1%F.S.
0~60W
0~600W
15mW
150mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.002~0.5A/µs
0.02~5A/µs
0.002A/µs
0.02A/µs
10µs (Typical)
0~12A
0~120A
3mA
30mA
0.4%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~12A
0~120A
0.375mA
3.75mA
3mA
30mA
0.1% + 0.1%F.S.
≒62.4W
≒12.24A
-
≒624W
≒122.4A
0~30W
7.5mW
11-17
120W
0~24A
0.8~200mA/µs
0.8mA/µs
0~5A
1.25mA
0~16V
0.5mV
0~250W
62.5mW
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.64~160mA/µs
64~1600mA/µs
0.64mA/µs
64mA/µs
10µs (Typical)
0~4A
0~40A
1mA
10mA
0.4%F.S.
0~80V
0~16V
2.5mV
0.5mV
0.05% + 0.05%F.S.
1200W
0~240A
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
0~2A
0.5mA
0.1%+0.1%F.S.
0~20A
5mA
0.1%+0.2%F.S.
0~24A
6mA
0.1%+0.1%F.S.
0~240A
60mA
0.1%+0.2%F.S.
0~500V
0.0375Ω~150Ω (250W/16V)
1.875Ω~7.5kΩ (250W/80V)
12 bits
150Ω: 0.1 + 0.2%
7.5kΩ: 0.01 + 0.1%
0~30W
7.5mW
0.5% ± 0.5%F.S.
63312A
600W
0~20A
0~80V
2.5mV
0~80V
0.625Ω~2.5kΩ (600W/125V)
25Ω~100kΩ (600W/500V)
12 bits
25kΩ: 50m + 0.2%
100kΩ: 5m + 0.1%
6.25mΩ~25Ω (1200W/16V)
0.3125Ω~1.25kΩ (1200W/80V)
12 bits
25Ω: 0.8 + 0.8%
1.25kΩ: 0.08 + 0.2%
0~500V
125mV
0.05% ± 0.1%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~60W
0~600W
15mW
150mW
0.5% ± 0.5%F.S.
0~120W
0~1200W
30mW
300mW
0.5% ± 0.5%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.32~80mA/µs
3.2~800mA/µs
0.32mA/µs
3.2mA/µs
24µs (Typical)
0~2A
0~20A
0.5mA
5mA
0.4%F.S.
C.C. Mode
0.025ms~10ms/Res:1µs
1ms~30s/Res:1ms
1µs/1ms+100ppm
0.004~1A/µs
0.04~10A/µs
0.004A/µs
0.04A/µs
10µs (Typical)
0~24A
0~240A
6mA
60mA
0.4%F.S.
0~125V
0~500V
4mV
16mV
0.05% + 0.05%F.S.
0~16V
0~80V
0.5mV
2.5mV
0.05% + 0.05%F.S.
0~24A
0~240A
0.75mA
7.5mA
6mA
60mA
0.15% + 0.15%F.S.
0~80V
20mV
0.05% ± 0.1%F.S.
0~5A
0.15625mA
1.25mA
0~4A
0.125mA
1mA
0.1% + 0.1%F.S.
0~40A
1.25mA
10mA
0~2A
0~20A
0.375mA
0.625mA
0.5mA
5mA
0.1% + 0.1%F.S.
≒31.2W
≒5.1A
≒31.2W
≒4.08A
≒260W
≒40.8A
≒62.4W
≒2.04A
≒624W
≒20.4A
≒124.8W
≒24.48A
≒1248W
≒244.8A
≒85℃
≒85℃
≒85℃
≒85℃
≒81.6V
≒81.6V
≒510V
≒81.6V
≒120A
0V
≒0.0125Ω
≒600W
100kΩ (Typical)
100PPM/℃ (Typical)
Supply from 6334A Mainframe
172 x 162 x 495 mm / 6.8 x 6.4 x 19.5 inch
8.4 kg / 18.5 lbs
-
≒40A
0V
≒0.0375Ω
≒250W
100kΩ (Typical)
100PPM/℃ (Typical)
Supply from 6334A Mainframe
172 x 81 x 495 mm / 6.8 x 3.2 x 19.5 inch
4.5 kg / 9.9 lbs
Operating Range
0~40℃
EMC & Safety
CE
NOTE*1 :
Low voltage operation, under 0.8 volt, is possible at correspondingly reduced current level.
Operating temperature range is 0ºC to 40ºC. All specifications apply for 25ºC±5ºC, except as noted
Mainframe Model
Dimension (HxWxD)
Weight
63308A
Ω
Ω
Constant Current Mode
Range
Resolution
Accuracy
Constant Resistance Mode
250W
0~40A
[email protected]
[email protected]
63307A (30W & 250W)
30W
0~4A
0~80V
[email protected]
[email protected]
600W
0~120A
Ω
Ω
Min. Operation Voltage (DC) *1
(Typical)
63306A
60W
0~12A
Ω
Ω
Model
Power
Current
Voltage
6332A
177 x 275 x 543 mm / 7 x 10.8 x 21.4 inch
15 kg / 33.1 lbs
0~40℃
CE
-
≒20A
≒240A
0V
0V
≒0.625Ω
≒0.00625Ω
≒600W
≒1200W
100kΩ (Typical)
100kΩ (Typical)
100PPM/℃ (Typical)
100PPM/℃ (Typical)
Supply from 6334A Mainframe
Supply from 6334A Mainframe
172 x 162 x 495 mm / 6.8 x 6.4 x 19.5 inch 172 x 324 x 495 mm/6.8 x 12.8 x 19.5 inch
8.4 kg / 18.5 lbs
16.8 kg / 37 lbs
0~40℃
CE
0~40℃
CE
6334A
177 x 439 x 543 mm / 7 x 17.3 x 21.4 inch
22 kg / 48.5 lbs
All specifications are subject to change without notice.
Model No.
High Slew Rate DC Electronic Load 6345/6346
GPIB
1V(typical)
1V(typical)
5µs-10ms / 1ms-30s
1µs+100ppm / 1ms+100ppm
0.08-20A/µs;0.4-100A/µs
1µs
5µs-10ms / 1ms-30s
1µs+100ppm / 1ms+100ppm
0.12-30A/µs;0.6-150A/µs
0.5µs
<5%
<5%
10V/50V (Auto)
0.33mV/1.67mV
0.05%+0.05%F.S.
2%F.S.
10V/50V (Auto)
0.33mV/1.67mV
0.05%+0.05%F.S.
2%F.S.
10V/50V (Auto)
2.5mV/12.5mV
0.1%+20mV/0.1%+100mV
10V/50V (Auto)
2.5mV/12.5mV
0.1%+20mV/0.1%+100mV
30A/150A
1mA/5mA
0.2%+0.1%F.S.
1%F.S.
2%F.S.
30A/150A
1mA/5mA
0.2%+0.1%F.S.
1%F.S.
2%F.S.
CE
CE
177.4 x 439 x 449.5 mm / 6.98 x 17.28 x 17.7 inch
24 kg / 52.86 lbs
177.4 x 439 x 449.5 mm / 6.98 x 17.28 x 17.7 inch
24 kg / 52.86 lbs
PXI Instruments
& Systems
0-30A/0-150A
7.5mA/37.5mA
0.5%+0.2%F.S.
General Purpose
Test Instruments
0-30A/0-150A
7.5mA/37.5mA
0.5%+0.2%F.S.
Electrical Safety
Test Instruments
6346
125W/625W
30A/150A
10V/50V
0.8V*(typical)
Passive Component
Test Instruments
6345
125W/625W
30A/150A
10V/50V
0.8V*(typical)
Power Supply
Test Equipment
All specifications are subject to change without notice.
Voltage and current monitoring outputs allow users observe the
loading current and the output voltage of VRM via oscillatescope.
A634003 :
Fixture for 40 pin VRM
Optical Inspection
Equipment
Dimension (HxWxD)
Weight
Chroma model 6340 series loads can draw its rated current under
very low voltage ( 0.8V typical ). Even under the highest specified
slew rate, it still can work under only 1V input voltage. The low
voltage operating capability pervade the future trend of lowing
VRM output voltage.
6345 : DC Electronic Load 100A/uS
6346 : DC Electronic Load 150A/uS
A630002 : GPIB interface for Model 6304/6314/6334/
6340 mainframe
A634002 : Fixture for 60 pin VRM
A634003 : Fixture for 40 pin VRM
A634004 : Fixture for 62 pin VRM
Video & Color
Test Equipment
SPECIFICATIONS
Model
Power
Current
Voltage
Min. operating voltage
Constant Current mode
SPECIFICATIONS
Range
Resolution
Accuracy
Dynamic mode
Min. operating voltage
Timing
T1&T2
Accuracy
Slew rate
Min. rise time
Current
Overshoot
Measurement
Voltage read back
Range
Resolution
Accuracy
V_monitor accuracy
Voltage peak detector
Range
Resolution
Accuracy
Current read back
Range
Resolution
Accuracy
I_share accuracy
I_monitor accuracy
General
EMC & Safety
The test fixture can be fabricated upon customers' specifications.
It can be configured for 5 or 10 VRMs. With the individual channel
current measurement, it allows users checking the current sharing
characteristics of the VRM.
ORDERING INFORMATION
LCD/LCM
Test Equipment
KEY FEATURES
■ Power Rating: 625W
■ Voltage range: 0.8-50V
■ Current range: 0A-150A
■ Slew rate: Up to 150A/µs
■ CC load mode
■ Dynamic loading: Up to 100kHz
■ Voltage / Current measurement
■ Voltage / Current monitor output
■ Peak voltage detection
■ Capable of testing up to 10 VRMs at a time
■ Current share measurement
■ Full protection: OP, OC, OV, OT and reverse protection
■ GPIB & RS-232 interface
The model 6340 family offers 2 models with power ranging 625
watts, current from 100A to 150A, and slew rate control from
0.12A/uS to 150A/uS at dynamic frequency up to 100kHz. All the
loading and slew rate are programmable and can be controlled via
front panel operation or RS-232/GPIB interface.
Chroma model 6340 series loads build-in fan speed control to
minimize the audio noise. The self-diagnosis routine and the full
protections against OPP, OCP, OVP, OTP and reverse polarity
ensure the quality and reliability for even the most demanding
engineering testing and ATS application.
LED
Test Equipment
DC Electronic Load
Model 6345 / 6346
625W
In addition, the peak voltage measurement provides numerical
reading of the over-shoot and under-shoot voltage of the UUT.
Thus, users may specify the readings and perform GO/NG test.
Semiconductor/IC
Test Equipment
Chroma high slew rate load model 6340 series provides total
solution for VRM testing. The VRM is introduced to substitute
the power supply when micro processor draws a burst of current
from it. Chroma high slew rate load model 6340 series is capable
to simulate from 0.12A/uS to 150A/uS transit loading. And its
voltage, current measurement and monitoring functions makes it
an ideal test instrument for the designers or the manufacturers of
high speed power delivery devices.
Solar Cell
Test Equipment
RS-232
11-18
Model No.
High Slew Rate DC Electronic Load 63472
RS-232
GPIB
■ Customized adapter boards for different types of VRMs,
CPU sockets or Power Pod
■ Optional Bias voltage source for CPU adapter for
embedded testing scenarios
■ Full protection: OP,OC and OV protection
■ Versatile remote controller
■ GPIB & RS-232 interfaces
■ LabView Soft-panel
High Slew Rate Load
Control & Measurement Unit
Model 63472
200W/ 1200A/µs
As a result of the exploding increase in CPU complexity according
to Moore's Law, all modern processors require a low voltage
with high instantaneous current power source. Voltage Regulator
Modules, along with embedded solutions, are the only way to
correctly supply these currents. A need to simulate this low
voltage, high current with fast di/dt loading has become more
important than ever. Every main board design using a VRM, Intel
®
ItaniumTM power pod or an embedded regulator (VRD) will need
processor voltage supply performance qualification.
KEY FEATURES
■ Designed for VRM's, embedded VRD's and Power
Pod testing
■ Static Loading- Power rating: 200W
Voltage range: 0-2V
Current range: 150A
■ Dynamic Loading- Current range: 150A
Slew rate: Up to 1200A/µs
Dynamic Freq: Up to 1MHz
Duty control: 10-90%
■ Built-in and user definable VID tables for flexibility
■ Dynamic VID simulation
■ Current&Voltage monitor output
■ Measurements- Static mode: Vdc, Idc
Dynamic mode: Vpk+, VpkDynamic VID: Vpk check, Vdc for last VID
Integrating Intel®'s latest high di/dt test technology with years
of experience in the design and manufacture of highly accurate,
precision DC load and measurement instrumentation, the Chroma
63472 electronic load is your total solution for qualifying all main
board Intel® processor power performance requirements!
The Chroma 63472 electronic load provides 150A of static, DC
load with 150A of dynamic load - featuring up to 1200A/us slew
rate! This fully controllable capability, along with Dynamic VID
control and sophisticated measurement functions, comprises a
total solution - all in one unit. Gone is the need for the individual
equipment stack of traditional test setups, saving precious bench
space and expense. The Chroma 63472 can replace a function
generator, oscilloscope, DVM, DC load bank, in addition to any
customized dynamic load and VID control circuitry.
Similarly, the Chroma 63472 makes an economical choice for all
your production line test requirements. From industry data, more
than 5% of today's main boards fail due to on-board converter
failures. The Chroma 63472 can quickly identify suspect units in
production - well ahead of an expensive service call.
ORDERING INFORMATION
63472 : High Slew Rate Load Control & Measurement Unit
A634701 : Remote controller for 63472
A634702 : Transient Load
A634703 : Test fixture for Power Pod
A634704 : Test fixture for VRM10.0
A634705 : Socket 478 Interposer Card
A634706 : Socket 604 Interposer Card of Single Voltage
A634707 : Socket 604 Interposer Card of Dual Voltage
A634708 : Socket 604 Interposer Card of Triple Voltage
A634709 : 19" Rack Mounting Kit
A634710 : Test fixture for MVR Rev 1.4
A634711 : LGA 775 Interposer Card (6 Bits)
A634712 : Test fixture for VRM11.0
A630002 : GPIB Interface for Model 6304/6314/6340 Mainframe
SPECIFICATIONS
SPECIFICATIONS
Model
63472
Static Load Section
Power
200W
Current
Range
0~150A
Resolution
12bits
Accuracy
0.1% + 0.2%F.S.
Voltage
Range
0~2V
Min. Voltage
0.5V @ full load
Protection
OCP
165A
OVP
2.1V
Dynamic Load Section
Current Range
0~150A
Dynamic~clock
1MHz(10~90%)
Resolution
1%
Accuracy
100 ppm
Slew Rate
100A/µs~1000A/µs
Min. rise time
100ns
TTL Output
Level
Low (<0.8V), High (>3.15V)
VID code
6 bits
OUTEN
Yes
Aux. Power
Outputs
+12V /+5V
Current
0.5A / 0.3A
Power
7.5W total
Load regulation
5%
Measurement Section
Input Section
Input Voltage Read Back
Range
15V / 58V (Auto)
Resolution
16bits
Accuracy
0.05% + 0.05%F.S.
Input Current Read Back
11-19
Range
Resolution
Accuracy
Static Mode
Voltage Read Back
Range
Resolution
Accuracy
Current Read Back
Range
Resolution
Accuracy
Dynamic Mode
I Monitor Read Back
Range
Resolution
Accuracy
Peak Voltage
I Monitor Read Back
Range
Resolution
Accuracy
Dynamic VID
Voltage Read Back
Range
Resolution
Accuracy
Dynamic VID Control
Dwell Time
Range
Resolution
Others
Interface
0.5V(refer to 5A)/2.5V(refer to 25A) (Auto)
16bits
0.1% + 0.1%F.S.
0~2V
16bits
0.05% + 0.05%F.S.
A634701 :
Remote Controller
A634702 :
Transient Load
0~150A
16bits
0.1% + 0.1%F.S.
0~0.536V (refer to 150A)
12bits
0.5% + 0.2%F.S.
0~2V
12bits
0.5% + 0.2%F.S.
A634703 : Test fixture for Power Pod
A634704 : Test fixture for VRM10.0
0~2V
12bits
0.5% + 0.2%F.S.
A634705 : Adapter Board for Socket 478
5µs~10ms
1µs
For A634701 Remote Controller
or PC Control
GPIB
Optional
Dimension (H x W x D) 133.35 x 428.3 x 380 mm / 5.25 x 16.86 x 14.96 inch
Weight
16.7 kg / 36.78 lbs
RS-232
All specifications are subject to change without notice.
Model No.
Programmable DC Electronic Load 63600 Series
GPIB
USB
The 63600’s state of the art design uses DSP technology to
simulate non-linear loads using a unique CZ operation mode
allowing realistic loading behavior.
The 63600 series can draw its rated current under very low voltage
(0.8V typical). This unique feature guarantees the best loading
performance to a low voltage power supply.
0.4V @ 0.1A
0.8V @ 0.2A
0.4V @ 1A
0.8V @ 2A
0~0.2A
0~2A
14 bits
0.1%+0.1%F.S.
Resolution
Accuracy
0.4V @ 10A
0.8V @ 20A
0.4V @ 0.3A
0.8V @ 0.6A
04V @ 3A
0.8V @ 6A
0~20A
0~0.6A
0~6A
14 bits
0.1%+0.1%F.S.
0.4V @ 0.4A
0.8V @ 0.8A
0.4V @ 4A
0.8V @ 8A
0.4V @ 40A
0.8V @ 80A
0~60A
0~0.8A
0~8A
14 bits
0.1%+0.1%F.S.
0~80A
CRL : 0.04~80 ohm(6V)
CRM: 1.44~2.9k ohm(16V)
CRH : 5.76~12k ohm(80V)
14 bits
0.1%+0.075 mho(6V)
0.1%+0.01 mho(16V)
0.1%+0.00375 mho(80V)
CRL : 0.015~30 ohm(6V)
CRM: 0.3~600 ohm(16V)
CRH : 1.5~3k ohm(80V)
14 bits
0.1%+0.2 mho(6V)
0.1%+0.03 mho(16V)
0.1%+0.01 mho(80V)
CRL : 0.01~20 ohm(6V)
CRM: 0.36~720 ohm(16V)
CRH : 1.45~2.9k ohm(80V)
14 bits
0.1%+0.275 mho(6V)
0.1%+0.036 mho(16V)
0.1%+0.01375 mho(80V)
6V/16V/80V
14 bits
0.05%+0.1%F.S.
6V/16V/80V
14 bits
0.05%+0.1%F.S.
6V/16V/80V
14 bits
0.05%+0.1%F.S.
10W
1mW/10mW/100mW
0.3%+0.3%F.S.
100W
1.5V
100Hz~50kHz/0.01Hz~1kHz
1~99% (Min. Rise Time Dominated)
1us/1ms+100ppm
0.04A/ms~
0.4A/ms~
4A/ms~
0.02A/µs
0.2A/µs
2A/µs
9 bit
10 µs
0~0.2A
0.4V @ 30A
0.8V @ 60A
0~2A
14 bits
0~20A
6W
30W
3.2mW/32mW/320mW
0.3%+0.3%F.S.
300W
1.5V
100Hz~50kHz/0.01Hz~1kHz
1~99% (Min. Rise Time Dominated)
1us/1ms+100ppm
0.12A/ms~
1.2A/ms~
12A/ms~
0.06A/µs
0.6A/µs
6A/µs
9 bit
10 µs
0~0.6A
0~6A
14 bits
0~60A
8W
40W
4mW/40mW/400mW
0.3%+0.3%F.S.
400W
1.5V
100Hz~50kHz/0.01Hz~1kHz
1~99% (Min. Rise Time Dominated)
1us/1ms+100ppm
0.16A/ms~
1.6A/ms~
16A/ms~
0.08A/µs
0.8A/µs
8A/µs
9 bit
10 µs
0~0.8A
0~8A
14 bits
0~80A
• Continued on next page ➟
All specifications are subject to change without notice.
11-20
PXI Instruments
& Systems
Resolution
Min.rise time
Current Range
Resolution
0~80A
400W
General Purpose
Test Instruments
Slew rate
2W
0~60A
300W
Electrical Safety
Test Instruments
Constant Voltage Mode Range
Resolution
Accuracy
Constant Power Mode Range
Resolution
Accuracy
Dynamic Mode - CC
Min. operating voltage
Frequency
Duty
Accuracy
0~0.8A
8W
63640-80-80
400Wx1
0~80V
0~8A
40W
Passive Component
Test Instruments
0~20A
100W
Range
0~0.6A
6W
63630-80-60
300Wx1
0~80V
0~6A
30W
Power Supply
Test Equipment
0~0.2A
2W
63610-80-20
100Wx2
0~80V
0~2A
10W
Optical Inspection
Equipment
Constant Current Mode
Range
Resolution
Accuracy
Constant Resistance Mode Real time measurement of voltage and current is integrated into
each 63600 load module using a 16-bit, measurement circuit with
three ranges of operation. The user can perform online voltage
measurements and adjustments, or simulate short circuit test
using the simple keypad on the front panel.
ORDERING INFORMATION
63600-1 : 63600 Mainframe for Single Modules
63600-3 : External Signal Board
63600-5 : 63600 Mainframe for 5 Modules
63610-80-20 : DC Load Module, 100W x 2/ 80V/ 20A
63630-80-60 : DC Load Module, 300W/ 80V/ 60A
63640-80-80 : DC Load Module, 400W/ 80V/ 80A
A636000 : GPIB Interface
A636001 : Ethernet Interface
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
Video & Color
Test Equipment
Min. operating voltage (DC)
The 63600 series can simulate a wide range of dynamic loading
applications, with programmable load levels, slew rates, duration
and conducting voltage. The 63600 series also have dynamic
sweep function to meet the test requirements of ATX power.
Furthermore, up to 100 sets of system operating status can be
stored in EEPROM and recalled instantly for automated testing
application.
LCD/LCM
Test Equipment
KEY FEATURES
■ Max. Power: 100W x 2(Dual), 300W & 400W
■ Voltage Range: up to 80V
■ High power density for mainframe (63600-5)
[5 slots for 400W modules/100W(dual) up to 10 channels]
■ Up to 10 channels in one mainframe, fit for testing multiple
output SMPS
■ CZ mode for turn on capacitive load simulation
■ Parallel mode for high current and power application up to 2kW
■ Auto frequency sweep for dynamic test 50kHz
■ Real time power supply load transient response simulation and
Vpk± measurement
■ User programmable 100 sequential front panel input status for
user-friendly operating
■ Measurement of voltage and current point when OCP/OLP
occurred
■ Ethernet, USB and GPIB interfaces
SPECIFICATIONS
Model
Configuration
Voltage *1
Current
Power *2
Static Mode
The 63600 series has self-diagnosis routine and full protections
against OP, OC, OV, OT and reverse polarity to ensure the quality
and reliability of the 63600 series.
LED
Test Equipment
Programmable DC Electronic Load
Model 63600 Series
With the VFD display and rotary knob, the 63600 electronic loads
offer versatile front panel operation. Users are able to control the
63600 family remotely via Ethernet, USB, or GPIB interface.
Semiconductor/IC
Test Equipment
Chroma’s 63600 Series DC Electronic Loads are designed for
testing multi-output A/D power supply, D/D converter, charger,
battery, adapter and power electronic components and good
for application in areas such as research and development,
production, and incoming inspection.
Solar Cell
Test Equipment
Ethernet
Ext Wave Mode(20KHz) : CC
Range
Level
Accuracy
Program mode
Sequence No.
Dwell / SEQ
Load Setting
Spec Check
Measurement
Voltage read back
Range
Resolution
Accuracy
Current read back
Range
Resolution
Accuracy
Power read back
Range
Resolution
Accuracy
Voltage Monitor
Bandwidth
Range
Output
Accuracy
Current Monitor
Bandwidth
Range
Output
Accuracy
Protection
Over Power
Over Current
Over Voltage
OTP
Reverse
Interface
USB
Remote controller
Ethernet
GPIB
System Bus
Others
Dout
No. of bits
Level - H
Level - L
Drive
Din (TTL Compatible)
No. of bits
External Trig. for Digitizing
No. of bits
External Trig. for Auto Sequences
No. of bits
Load ON - O/P
Level
Short ON - O/P
No. of channels
Level
General
Short circuit
Current
Dimension (H x W x D)
Weight
Operating Temperature
StorageTemperature
Power
EMC & Safety
0~0.2A
0~2A
0~10V
0.5%F.S.
0~20A
0~0.6A
Model No.
Programmable DC Electronic Load
63600 Series
0~6A
0~10V
0.5%F.S.
0~60A
0~0.8A
0~8A
0~10V
0.5%F.S.
100/Program
0.1ms~30s (Resolution : 0.1ms)
Refer to Static mode specifications
Voltage/Current/Power
100/Program
0.1ms~30s (Resolution : 0.1ms)
Refer to Static mode specifications
Voltage/Current/Power
100/Program
0.1ms~30s (Resolution : 0.1ms)
Refer to Static mode specifications
Voltage/Current/Power
6V/16V/80V/Auto
16bits
0.025%+0.01%F.S.
6V/16V/80V/Auto
16bits
0.025%+0.01%F.S.
6V/16V/80V/Auto
16bits
0.025%+0.01%F.S.
0~80A
0~0.2A
0~2A
16bits
0.05%+0.05%F.S.
0~20A
0~0.6A
0~6A
16bits
0.05%+0.05%F.S.
0~60A
0~0.8A
0~8A
16bits
0.05%+0.05%F.S.
0~80A
2W
10W
16bits
0.1%+0.1%F.S.
100W
6W
30W
16bits
0.1%+0.1%F.S.
300W
8W
40W
16bits
0.1%+0.1%F.S.
400W
20kHz
6V/16V/80V
0~10V
0.5%F.S.
20kHz
0~2A
0~10V
0.5%F.S.
0~0.2A
20kHz
6V/16V/80V
0~10V
0.5%F.S.
0~20A
20kHz
0~1A
0~10V
0.5%F.S.
0~0.1A
20kHz
6V/16V/80V
0~10V
0.5%F.S.
0~10A
0~0.8A
20kHz
0~8A
0~10V
0.5%F.S.
0~80A
105~110% of Rated Power
105~110% of Rated Current
105~110% of Rated Voltage
Yes
Yes
105~110% of Rated Power
105~110% of Rated Current
105~110% of Rated Voltage
Yes
Yes
105~110% of Rated Power
105~110% of Rated Current
105~110% of Rated Voltage
Yes
Yes
Standard
Optional
Optional
Optional
Master/Slave & Multi-channel Control
& Remote Controller
Standard
Optional
Optional
Optional
Master/Slave & Multi-channel Control
& Remote Controller
Standard
Optional
Optional
Optional
Master/Slave & Multi-channel Control
& Remote Controller
2 bits per mainframe
1.8V/3.3V/5V switchable
<0.6V
Pull_up resistor = 4.7k ohm
2 bits per mainframe
1.8V/3.3V/5V switchable
<0.6V
Pull_up resistor = 4.7k ohm
2 bits per mainframe
1.8V/3.3V/5V switchable
<0.6V
Pull_up resistor = 4.7k ohm
2 bits per mainframe
2 bits per mainframe
2 bits per mainframe
1 bit per mainframe
1 bit per mainframe
1 bit per mainframe
1 bit per mainframe
1 bit per mainframe
1 bit per mainframe
TTL Level, Active High
TTL Level, Active High
TTL Level, Active High
10 channels per mainframe
TTL Level, Active High
10 channels per mainframe
TTL Level, Active High
10 channels per mainframe
TTL Level, Active High
Set to 105% of rated current (H range)
142 x 86 x 514 mm / 5.6 x 3.4 x 20.2 inch
5 kg / 11 lbs
0~40℃
-20~80℃
Supply from mainframe
CE
Set to 105% of rated current (H range)
142 x 86 x 514 mm / 5.6 x 3.4 x 20.2 inch
4 kg / 8.8 lbs
0~40℃
-20~80℃
Supply from mainframe
CE
Set to 105% of rated current (H range)
142 x 86 x 514 mm / 5.6 x 3.4 x 20.2 inch
4.5 kg / 9.9 lbs
0~40℃
-20~80℃
Supply from mainframe
CE
Note*1 : The maximum current loading below the minimum operating voltage (0.8V) will follow a derating curve.
Note*2 : The power rating specification of Model 63640-80-80 at ambient temperature is 35℃.
63600 Series Mainframe Specification
Model
Number of slots
Operating temperature
Input Rating
Mainframe Dimension (H x W x D)
Weight (kg)
11-21
63600-1
1 slot
0~40℃
90~130/175~253VAC Switchable/47~63Hz
177 x 70.02 x 554.9 mm / 17.6 x 2.76 x 21.85 inch
7.5 kg / 16.53 lbs
63600-5
5 slots
0~40℃
90~130/175~253VAC Auto Range/47~63Hz
177 x 447 x 554.2 mm / 17.6 x 7.0 x 21.8 inch (Full Rack)
14 kg / 30.9 lbs
All specifications are subject to change without notice.
Model No.
Programmable AC/DC Electronic Load 63800 Series
Solar Cell
Test Equipment
RS-232
GPIB
ORDERING INFORMATION
SPECIFICATIONS
Model
Power
Current
Voltage
PXI Instruments
& Systems
11-22
General Purpose
Test Instruments
All specifications are subject to change without notice.
Electrical Safety
Test Instruments
Comprehensive measurements allow users to monitor the output
performance of UUT. Additionally, voltage & current signals
can be routed to an oscilloscope through analog outputs. The
instrument's GPIB/RS232 interface options provide remote control
& monitor for system integration. In addition, built-in digital
outputs may be used to control external relays for short circuit
(crowbar) testing.
Passive Component
Test Instruments
The 63800 series provides parallel and 3-phase functions for
high power and three phase applications. All the models within
the 63800 series can be used together for both parallel and
3-phase functions as well as paralleled AC Load units in 3-phase
configuration, providing excellent flexibility and cost savings for
the 63800 series AC load. Parallel and 3-phase controls are made
easy by linking the AC Load units together, control of all AC load
units will be made through the Master Unit.
50 to 350Vrms (500Vpeak)
Power Supply
Test Equipment
The 63800's state of the art designed uses DSP technology to
simulate non-linear rectified loads in a unique RLC operation
mode. This mode improves stability by detecting the impedance of
the UUT and dynamically adjusting the load's control bandwidth to
ensure system stability.
50 to 350Vrms (500Vpeak)
Optical Inspection
Equipment
The Chroma 63800 Loads can simulate load conditions under
high crest factor and varying power factors with real time
compensation even when the voltage waveform is distorted. This
special feature provides real world simulation capability and
prevents over-stressing thereby giving reliable and unbiased test
results.
50 to 350Vrms (500 Vpeak)
Frequency
45 to 440Hz, DC
45 to 440Hz, DC
45 to 440Hz, DC
AC Section
Constant Current Mode
Range
0 to 18Arms, Programmable
0 to 36Arms, Programmable
0 to 45Arms, Programmable
Accuracy
0.1% + 0.2%F.S.
0.1% + 0.2%F.S.
0.1% + 0.2%F.S.
Resloution
2mA
5mA
5mA
Constant Resistance Mode
Range
2.77Ω ~ 2.5kΩ, Programmable
1.39Ω~2.5kΩ, Programmable
1.11Ω~2.5kΩ, Programmable
Accuracy
0.5% + 0.5%F.S.
0.5% + 0.5%F.S.
0.5% + 0.5%F.S.
Resloution
20µ mho
50µ mho
50µ mho
Constant Power Mode
Range
1800W, Programmable
3600W, Programmable
4500W, Programmable
Accuracy
0.5% + 0.5%F.S.
0.2% + 0.3%F.S.
0.2% + 0.3%F.S.
Resloution
0.375W
1.125W
1.125W
Crest Factor (under CC, CP modes)
Range
1.414 to 5.0, Programmable
1.414 to 5.0, Programmable
1.414 to 5.0, Programmable
Accuracy
(0.5% / Irms) + 1% F.S.
(0.5%/Irms) + 1%F.S.
(0.5%/Irms) + 1%F.S.
Resloution
0.005
0.005
0.005
Power Factor
Range
0 to 1 lead or lag, Programmable
0 to 1 lead or lag, Programmable
0 to 1 lead or lag,Programmable
Accuracy
1%F.S.
1%F.S.
1%F.S.
Resloution
0.001
0.001
0.001
Rectified Load Mode
Operating Frequency
45Hz~70Hz
RLC Mode
Parameter : Ip(max), Rs, Ls, C, RL
Constant Power Mode
Parameter : Ip(max), Power setting=200W to 4500W, PF=0.4 to 0.75
Parameter : Ip(max), Rs, Ls, C, RL, Phase
Inrush Current Mode
80A (peak current)
160A (peak current)
200A (peak current)
Rs Range
0 to 9.999Ω
0 to 9.999Ω
0 to 9.999Ω
Ls Range
0 to 9999µH
0 to 9999µH
0 to 9999µH
C Range
100 to 9999µF
100 to 9999µF
100 to 9999µF
RL Range
2.77 to 9999.99Ω
1.39 to 9999.99Ω
1.11 to 9999.99Ω
DC Section
Voltage Range
7.5V to 500V
7.5V to 500V
7.5V to 500V
Current Range
0A to 18A
0A to 36A
0A to 45A
Min. operating voltage
7.5V
7.5V
7.5V
Rise time
75µs
75µs
75µs
Operating Mode
CC, CV, CR, CP, DC Rectified
Short Circuit Simulation
Use the CR mode loading under max. power rating
Measurement Section
DVM Range
500.0V
500.0V
500.0V
DVM Accuracy
0.1% + 0.1%F.S.
0.1% + 0.1%F.S.
0.1% + 0.1%F.S.
DVM Resloution
10mV
10mV
10mV
DAM Range
80.00A
160.00A
200.00A
DAM Accuracy(<70Hz)
0.1% + 0.2%F.S.
0.1% + 0.2%F.S.
0.1% + 0.2%F.S.
DAM Accuracy(>70Hz) 0.1% + 0.2%F.S. + 0.1% x CF² x kHz 0.1% + 0.2%F.S. + 0.1% x CF² x kHz 0.1% + 0.2%F.S. + 0.1% x CF² x kHz
DAM Resloution
1.0mA
2.5mA
2.5mA
Other Parameter
P(W), S(VA), Q(VAR), CF, PF, Freq, R, Ip-, Ip+, THDv
Others
Vmonitor
±500V / ±10V (Isolated)
±500V / ±10V (Isolated)
±500V / ±10V (Isolated)
Imonitor
±80A / ±10V (Isolated)
±200A / ±10V (Isolated)
±200A / ±10V (Isolated)
OCP : 19.2Arms ; OVP : 360Vrms
OCP : 38.4Arms ; OVP : 360Vrms
OCP : 48Arms ; OVP : 360Vrms
Protection
(DC : 510VDC)
(DC : 510VDC)
(DC : 510VDC)
OPP : 1920W ; OTP
OPP : 3840W ; OTP
OPP : 4800W ; OTP
Remote Interface
GPIB, RS-232 or analog control
Line Voltage
115/230 Vac±15%
177 x 430 x 585 mm /
310 x 430 x 585 mm
310 x 430 x 585 mm
Dimension ( H x W x D)
7.0 x 17.0 x 23.0 inch
12.2 x 17.0 x 23.0 inch
12.2 x 17.0 x 23.0 inch
Weight
34kg / 74.89lbs
60 kg / 132.16 lbs
60 kg / 132.16 lbs
Video & Color
Test Equipment
Chroma's 63800 Series AC/DC Electronic Loads are designed for
testing uninterruptible power supplies(UPS), Off-Grid Inverters,
AC sources and other power devices such as switches, circuit
breakers, fuses and connectors.
63804
4500W
0 to 45Arms (135 Apeak, continue)
LCD/LCM
Test Equipment
KEY FEATURES
■ Power Rating : 1800W, 3600W, 4500W
■ Voltage Range : 50V - 350Vrms
■ Current Range : Up to 45Arms
■ Peak Current : Up to 135A
■ Parallel/3-Phase Function
■ Frequency Range : 45~440Hz, DC
■ Crest Factor Range : 1.414~5.0
■ Power Factor Range : 0~1 lead or lag (Rectified mode)
■ CC, CR, CV, CP for DC Loading
■ Constant & Rectified Load Modes for AC Loading
■ Analog Voltage & Current Monitor
■ Measurement : V, I, PF, CF, P, Q, S, F, R, Ip-/+ and THDv
■ Full Protection : OP, OC, OV and OT protection
■ GPIB & RS-232 interfaces
63803
3600W
0 to 36Arms (108 Apeak, continue)
LED
Test Equipment
Programmable AC/DC
Electronic Load
Model 63800 Series
63802
1800W
0 to 18Arms (54 Apeak, continue)
Semiconductor/IC
Test Equipment
63802 : Programmable AC/DC Electronic Load 1800W/18A/350V
63803 : Programmable AC/DC Electronic Load 3600W/36A/350V
63804 : Programmable AC/DC Electronic Load 4500W/45A/350V
Model No.
Programmable AC Source
RS-232
Programmable AC Source
Model 61500 Series
500VA~36KVA
KEY FEATURES
■ Compact size and weight attributable to advance PWM
technology
■ AC+DC output mode for voltage DV offset simulation
■ Programmable output impedance for IEC 61000-3-3
■ IEC 61000-4-11, IEC 61000-4-14, IEC 61000-4-28
voltage dips and variation simulation
■ Harmonics,inter-harmonics waveform synthesizer for
IEC 61000-4-13 testing
■ Power line disturbance simulation capability
■ Programmable voltage,current limit
■ Comprehensive measurement capability, including
current harmonics
■ High output current crest factor, ideal for inrush current
testing
■ Turn on, turn off phase angle control
■ TTL signal which indicates output transient
■ Optional analog programmable interface
■ 2 units combined to high voltage source
■ 3 units combined to 3-phase power output
■ Optional GPIB and RS232 interface (Model 61501~61505)
■ Easy use graphic user interface: softpanel (Option)
■ Softpanel for IEC regulation test (Model 61501~61505)
GPIB
APG
Ethernet
61500 Series
PFC
The 61500 series AC power source defines new standard
for high performance AC power source. It equips with all the
powerful features. Such as power line disturbance simulation,
programmable output impedance, comprehensive measurement
function , wave-shape synthesis and regulation test software.
Chroma also provides a software for aerospace testing, including
MIL-STD-704F, RTCA DO-160D, ABD100. These features make
Chroma 61500 ideal for commercial , power electronics, ,avionics,
marine, military and regulation test applications from bench-top
testing to mass productions.
The 61500 series line up from 500VA up to 36KVA, one or three
phase output. This allows user to have maximum choices form
R/D design verification, quality assurance, to production testing.
Using the state-of-the-art PWM technology, the Chroma 61500
AC source is capable of delivering up to 6 times of peak current
(Model 61501~61505) verses to its maximum rated current which
makes it ideal for inrush current testing.
By using advanced DSP technology, 61500 AC power
source offers precision and high speed power and harmonics
measurements such as RMS voltage, RMS current, true power,
power factor, current crest factor and up to 40 orders of current
harmonics components.
The 61500 AC power source allows users to compose different
harmonic components to synthesize your own harmonic distorted
wave-shapes. The DC and AC+DC mode also extend the
applications to simulate the natural waveform, Chroma 61500 also
provides an external analog input, to amplify the analog signal
from arbitrary signal generator. Thus, it is capable to simulate the
unique waveform observed in the field.
With the versatile programmable output impedance and regulation
test software, the 61500 AC power source allows users to perform
Pre-compliance and compliance test against IEC 61000-4-11/-4-1
3/-4-14/-4-28 immunity test regulations and IEC 61000-3-2/-3-3
emission test regulations by incorporating Chroma 6630 power
analyzer.
ORDERING INFORMATION
61501 : Programmable AC Source 0~300V, 15~1kHz / 500VA, 1ø
61502 : Programmable AC Source 0~300V, 15~1kHz / 1KVA, 1ø
61503 : Programmable AC Source 0~300V, 15~1kHz / 1.5KVA, 1ø
61504 : Programmable AC Source 0~300V, 15~1kHz / 2KVA, 1ø
61505 : Programmable AC Source 0~300V, 15~1kHz / 4KVA, 1ø
61511 : Programmable AC Source 0~300V, 15~1.5kHz / 12KVA, 1 or 3ø
61512 : Programmable AC Source 0~300V, 15~1.5kHz / 18KVA, 1 or 3ø
A615001 : Remote Interface Board for 61501~61505 Series
(External V Input, RS-232 Interface, GPIB Interface)
A610004 : Universal Socket Center for Model 6512/6520/
6530/6560/6415/6420/6430/61500/61600/61700 Series (<15A)
A615007 : Softpanel for Model 61501~61505 Series
A615008 : DC Noise Filter (Max. 16A)
A615103 : Parallelable power stage unit 18KVA, 1 or 3ø,
for 61511/61512/61611/61612
A615104 : Input/Output terminals for parallel connecting
of 61511/61512/61611/61612
Softpanel
Model 61505
Main Operation Menu
Transient Voltage Programming
Distorted Waveform Editor
Voltage Dip, Short, Variation Regulation Test
Aerospace Testing : MIL-STD-704F
Aerospace Testing : RTCA DO-160D
Model 61511, 61512
11-23
All specifications are subject to change without notice.
Model No.
Programmable AC Source
61504
1
61505
1
500VA
1000VA
1500VA
2000VA
4000VA
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1KHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1KHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1KHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1KHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1KHz (Typical)
0.1%
0.2%
8A/4A (150V/300V)
48A/24A (150V/300V)
12A/6A (150V/300V)
72A/36A (150V/300V)
16A/8A (150V/300V)
96A/48A (150V/300V)
32A/20A (150V/300V)
192A/96A (150V/300V)
DC, 15~1KHz
0.15%
DC, 15~1KHz
0.15%
DC, 15~1KHz
0.15%
DC, 15~1KHz
0.15%
500W
212V/424V
4A/2A (212V/424V)
750W
212V/424V
6A/3A (212V/424V)
1000W
212V/424V
8A/4A (212V/424V)
2000W
212V/424V
16A/8A (212V/424V)
Video & Color
Test Equipment
0Ω +200µH~1Ω +1mH
2400Hz
90~250V, 1ø
47~63Hz
18A Max. @ 90V
0.97 Min.
90~250V, 1ø
47~63Hz
22A Max. @ 90V
0.98 Min.
90~250V, 1ø
47~63Hz
28A Max. @ 90V
0.98 Min.
190~250V, 3ø *5
47~63Hz
14A Max. @ 190V
0.98 Min.
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
48A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
72A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
96A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
192A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.4%+0.4%F.S.
0.1W
0.4%+0.4%F.S.
0.1W
0.4%+0.4%F.S
0.1W
2~40 orders
2~40 orders
2~40 orders
2~40 orders
0~40℃
-40 ~ +85℃
0~40℃
-40 ~ +85℃
CE ( include EMC & LVD )
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
0~40℃
-40 ~ +85℃
0~40℃
-40 ~ +85℃
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
266.7 x 482.6 x 569.5 mm /
10.5 x 19 x 22.42 inch
41 kg / 90.31 lbs
0.4%+0.4%F.S.
0.1W
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
Electrical Safety
Test Instruments
2400Hz
Passive Component
Test Instruments
2400Hz
Power Supply
Test Equipment
2400Hz
Optical Inspection
Equipment
Line Regulation
Load Regulation *2
Max. Current/Phase
r.m.s.
4A/2A (150V/300V)
peak
24A/12A (150V/300V)
Frequency
Range
DC, 15~1KHz
Accuracy
0.15%
Output Rating - DC
Power
250W
Voltage
212V/424V
Current
2A/1A (212V/424V)
Programmable Output Impedance
Range
Harmonics & Inter-harmonics Simulation
Bandwidth
2400Hz
Input rating
Voltage Range
90~250V, 1ø
Frequency Range
47~63Hz
Current
10A Max. @ 90V
Power Factor *3
0.97 Min.
Measurement
Voltage
Range/Phase
150V/300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1V
Current
Range (peak)
24A
Accuracy (r.m.s.)
0.4%+0.3%F.S.
Accuracy (peak)
0.4%+0.6%F.S.
Power
Accuracy
0.4%+0.4%F.S.
Resolution
0.1W
Harmonics
Range
2~40 orders
Others
Temperature
Operating
0~40℃
Storage
-40 ~ +85℃
Safety & EMC
133.35 x 482.6 x 569.5 mm /
Dimension (H x W x D)
5.25 x 19 x 22.42 inch
Weight
20 kg / 44.05 lbs
LCD/LCM
Test Equipment
61503
1
LED
Test Equipment
61502
1
Semiconductor/IC
Test Equipment
Distortion *1
61501
1
Solar Cell
Test Equipment
SPECIFICATIONS-1
Model
Output Phase
Output Rating - AC
Power/Phase
Voltage
Range/Phase
Accuracy
Resolution
61500 Series
General Purpose
Test Instruments
All specifications are subject to change without notice.
11-24
PXI Instruments
& Systems
• Continued on next page ➟
Model No.
Programmable AC Source
61500 Series
SPECIFICATIONS-2
Model
61511
61512
61511+A615103
61512+A615103
Output Phase
1 or 3 selectable
Output Rating-AC
Power
12KVA
18KVA
30KVA
36KVA
Each phase
4KVA
6 KVA
10KVA
12KVA
Voltage
Range
0~150V/0~300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Distortion *1
0.3% @50/60Hz , 1%@15~1KHz, 2%@>1KHz
Line regulation
0.1%
Load regulation *2
0.2%
Temp. coefficient
0.02% per degree from 25℃
Max Current (1-phase mode)
RMS
96A / 48A
144A / 72A
240A / 120A
288A / 144A
Peak (CF=4)
384A / 192A
576A / 288A
960A / 480A
1152A / 576A
Max Current (each phase in 3-phase mode)
RMS
32A / 16A
48A / 24A
80A / 40A
96A / 48A
Peak (CF=4)
128A / 64A
192A / 96A
320A / 160A
384A / 192A
Frequency
Range
DC, 15-1.5K Hz
Accuracy
0.15%
Phase
Range
0 ~ 360°
Resolution
0.3°
Accuracy
<0.8°@50/60Hz
DC Output (1-phase mode)
Power
6KW
9KW
15KW
18KW
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
48A / 24A
72A / 36A
120A / 60A
144A / 72A
DC Output (3-phase mode)
Power
2KVA
3KVA
5KVA
6KVA
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
16A / 8A
24A / 12A
40A / 20A
48A / 24A
Input AC Power (each phase)
AC type
3-phase, Delta or Y connecting
Voltage range
190-250V (Delta: L-L, Y: L-N)
Frequency range
47-63 Hz
Max. current
Delta: 80A Y: 70A
Delta: 120A Y: 90A
Delta: 200A Y: 160A
Delta: 240A Y: 180A
Measurement
Voltage
Range
150V / 300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Current
Range
128/32/8 A peak
192/48/12 A peak
320/80/20 A peak
384/96/24 A peak
Accuracy (rms)
0.4%+0.3%F.S.
Accuracy (peak)
0.4%+0.6%F.S.
Resolution
0.1 A
Power
Accuracy
0.4%+0.4% F.S
Resolution
0.1 W
Others
Waveform Synthesis
40 orders @ 50/60Hz
Harmonic measurement
Voltage / Current 40 orders @ 50/60Hz
Programmable impedance
0Ω+200μH ~ 1Ω+1mH
Efficiency *4
0.75 (Typical)
Protect
UVP, OCP, OPP, OTP, FAN
Interface
GPIB, RS-232, USB, Ethernet (standard)
Temperature
Operation
0℃ ~40℃
Storage
-40℃~85℃
Humunity
30 %~90 %
Safety & EMC
CE
Dimension (H x W x D)
1163 x 546 x 700 mm / 45.78 x 21.5 x 27.56 inch
1163 x 1092 x 700 mm / 45.78 x 42.99 x 27.56 inch
Weight
229.4 kg / 505.29 lbs
242.4 kg / 533.92 lbs
480 kg / 1057.27 lbs
495 kg / 1090.31 lbs
Note*1 : Maximum distortion is tested on output 125VAC (150V RANGE) and 250VAC (300V RANGE) with maximum current to linear load.
Note*2 : Load regulation is tested with sine wave and remote sense.
Note*3 : Input power factor is tested on input 220V, full load condiction.
Note*4 : Efficiency is tested on input voltage 230V.
Note*5 : Model 61505 can also use single-phase connecting method of input AC power, the maximum input current is [email protected]
11-25
All specifications are subject to change without notice.
Model No.
Programmable AC Source
GPIB
APG
PFC
Using the state-of-the-art PWM technology, the Chroma 61600
AC source is capable of delivering up to 6 times of peak current
verses to its maximum rated current which makes it ideal for
inrush current testing.
With the LCD display and rotary nob, the Chroma 61600 AC
power source offers versatile front panel operation. Users may
also control the 61600 remotely via GPIB,RS232 or APG(Analog
Programming) interface.
The self-diagnosis routine and the full protections against OPP,
OCP, OVP and OTP ensure the quality and reliability for even the
most demanding engineering testing and ATE application.
ORDERING INFORMATION
Video & Color
Test Equipment
61601 : Programmable AC Source 0~300V, 15-1kHz / 500VA, 1ø
61602 : Programmable AC Source 0~300V, 15-1kHz / 1KVA, 1ø
61603 : Programmable AC Source 0~300V, 15-1kHz / 1.5KVA, 1ø
61604 : Programmable AC Source 0~300V, 15-1kHz / 2KVA, 1ø
61605 : Programmable AC Source 0~300V, 15-1kHz / 4KVA, 1ø
61611 : Programmable AC Source 0~300V, 15~1.5kHz / 12KVA, 1 or 3ø
61612 : Programmable AC Source 0~300V, 15~1.5kHz / 18KVA, 1 or 3ø
A615001 : Remote Interface Board for 61601~61605 Series
(External V Input, RS-232 Interface, GPIB Interface)
A610004 : Universal Socket Center for Model 6512/6520/6530/
6415/6420/6430/61500/61600/61700 Series (<15A)
A615007 : Softpanel for Model 61601~61605 Series
A615008 : DC Noise Filter (Max. 16A)
A615103 : Parallelable power stage unit 18KVA, 1 or 3ø,
for 61511/61512/61611/61612
A615104 : Input/Output terminals for parallel connecting
of 61511/61512/61611/61612
LCD/LCM
Test Equipment
Optical Inspection
Equipment
KEY FEATURES
■ Built-in PFC, provide input power factor over
0.98 (full load)
■ AC+DC output mode for voltage DC offset simulation
■ Programmable voltage,current limit
■ Comprehensive measurement capability,V, Hz, Irms,
Ipk, Iinrush, P, VAR, VA, PF, CF of current and etc.
■ High output current crest factor, ideal for inrush
current testing
■ Turn on, turn off phase angle control
■ One-key recall for 9 different voltage and frequency
■ Programmable slew rate setting for changing
voltage and frequency
■ Analog input for power amplifier
■ Optional Analog programming interface
■ Optional GPIB and RS-232 interface(Model 61601~61605)
■ Full protection: OP,OC,OV and OT protection
■ Easy use graphic user interface: softpanel (option)
The 61600 AC power source generates very clean AC output with
typical distortion less than 0.3-0.5%. With power factor correction
circuit, the 61600 AC power source yields higher efficiency and
deliver more output power .
The DC and AC+DC mode extend the applications when users
need DC voltage component. The 61600 AC power source also
provides an external analog input, to amplify the analog signal
from arbitrary signal generator. Thus, it is capable to simulate the
unique waveform which observed in the field.
LED
Test Equipment
Programmable AC Source
Model 61600 Series
500VA~36KVA
By using advanced DSP technology, 61600 AC power source
offers precision and high speed measurements such as RMS
voltage, RMS current, true power, power factor, and current crest
factor.
Semiconductor/IC
Test Equipment
The Chroma Model 61600 series Programmable AC Power Source
delivers pure, instrument grade AC and DC power at very low
cost. The 61600 AC power source offers output voltage from 0 to
300VAC, and frequency from 15 to 1.5KHz. A easy-use software
can let users edit an auto-run profile and record the measuring
data during the test. It is suitable for commercial , avionics,
marine, and military applications from bench-top testing to mass
productions.
Solar Cell
Test Equipment
RS-232
61600 Series
Power Supply
Test Equipment
Model 61605
Passive Component
Test Instruments
Electrical Safety
Test Instruments
Main Operation Menu
General Purpose
Test Instruments
Model 61611, 61612
• Continued on next page ➟
All specifications are subject to change without notice.
11-26
PXI Instruments
& Systems
Auto Run (for ON/OFF Burn in test)
Model No.
Programmable AC Source
SPECIFICATIONS-1
Model
Output phase
Output Rating - AC
Power/Phase
Voltage
Range/Phase
Accuracy
Resolution
Distortion (Note 1)
Line Regulation
Load Regulation (Note 2)
Max. Current/Phase
r.m.s.
peak
Frequency
Range
Accuracy
Output Rating - DC
Power
Voltage
Current
Input Rating
Voltage Range
Frequency Range
Current
Power Factor (Note 3)
Measurement
Voltage
Range/Phase
Accuracy
Resolution
Current
Range (peak)
Accuracy (r.m.s.)
Accuracy (peak)
Power
Accuracy
Resolution
Others
Temperature
Operating
Storage
Safety & EMC
Dimension (H x W x D)
Weight
11-27
61600 Series
61601
1
61602
1
61603
1
61604
1
61605
1
500VA
1000VA
1500VA
2000VA
4000VA
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1kHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1kHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1kHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1kHz (Typical)
0.1%
0.2%
150V/300V/Auto
0.2%+0.2%F.S.
0.1V
0.3% @ 50/60Hz
1%, 15~1kHz (Typical)
0.1%
0.2%
4A/2A (150V/300V)
24A/12A (150V/300V)
8A/4A (150V/300V)
48A/24A (150V/300V)
12A/6A (150V/300V)
72A/36A (150V/300V)
16A/8A (150V/300V)
96A/48A (150V/300V)
32A/20A (150V/300V)
192A/96A (150V/300V)
DC, 15~1kHz
0.15%
DC, 15~1kHz
0.15%
DC, 15~1kHz
0.15%
DC, 15~1kHz
0.15%
DC, 15~1kHz
0.15%
250W
212V/424V
2A/1A (212V/424V)
500W
212V/424V
4A/2A (212V/424V)
750W
212V/424V
6A/3A (212V/424V)
1000W
212V/424V
8A/4A (212V/424V)
2000W
212V/424V
16A/8A (212V/424V)
90~250V, 1ø
47~63Hz
10A Max. @ 90V
0.97 Min.
90~250V, 1ø
47~63Hz
18A Max. @ 90V
0.97 Min.
90~250V, 1ø
47~63Hz
22A Max. @ 90V
0.98 Min.
90~250V, 1ø
47~63Hz
28A Max. @ 90V
0.98 Min.
190~250V, 3ø (Note 5)
47~63Hz
14A Max. @ 190V
0.98 Min.
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
24A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
48A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
72A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
96A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
192A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.4%+0.4%F.S.
0.1W
0.4%+0.4%F.S.
0.1W
0.4%+0.4%F.S
0.1W
0~40℃
-40 ~ +85℃
CE ( include EMC & LVD )
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
0~40℃
-40 ~ +85℃
0~40℃
-40 ~ +85℃
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
266.7 x 482.6 x 569.5 mm /
10.5 x 19 x 22.42 inch
41 kg / 90.31 lbs
0.4%+0.4%F.S.
0.1W
0.4%+0.4%F.S.
0.1W
0~40℃
-40 ~ +85℃
0~40℃
-40 ~ +85℃
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
133.35 x 482.6 x 569.5 mm /
5.25 x 19 x 22.42 inch
20 kg / 44.05 lbs
All specifications are subject to change without notice.
Model No.
Programmable AC Source
61600 Series
Solar Cell
Test Equipment
LED
Test Equipment
LCD/LCM
Test Equipment
Video & Color
Test Equipment
Optical Inspection
Equipment
Power Supply
Test Equipment
Passive Component
Test Instruments
Electrical Safety
Test Instruments
General Purpose
Test Instruments
PXI Instruments
& Systems
All specifications are subject to change without notice.
Semiconductor/IC
Test Equipment
SPECIFICATIONS-2
Model
61611
61612
61611+A615103
61612+A615103
Output Phase
1 or 3 selectable
Output Rating-AC
Power
12KVA
18KVA
30KVA
36KVA
Each phase
4KVA
6 KVA
10KVA
12KVA
Voltage
Range
0~150V/0~300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Distortion *1
0.3% @50/60Hz , 1%@15~1KHz, 2%@>1KHz
Line regulation
0.1%
Load regulation *2
0.2%
Temp. coefficient
0.02% per degree from 25℃
Max Current (1-phase mode)
RMS
96A / 48A
144A / 72A
240A / 120A
288A / 144A
Peak (CF=4)
384A / 192A
576A / 288A
960A / 480A
1152A / 576A
Max Current (each phase in 3-phase mode)
RMS
32A / 16A
48A / 24A
80A / 40A
96A / 48A
Peak (CF=4)
128A / 64A
192A / 96A
320A / 160A
384A / 192A
Frequency
Range
DC, 15-1.5K Hz
Accuracy
0.15%
Phase
Range
0 ~ 360°
Resolution
0.3°
Accuracy
<0.8°@50/60Hz
DC Output (1-phase mode)
Power
6KW
9KW
15KW
18KW
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
48A / 24A
72A / 36A
120A / 60A
144A / 72A
DC Output (3-phase mode)
Power
2KVA
3KVA
5KVA
6KVA
Voltage
212V / 424V
212V / 424V
212V / 424V
212V / 424V
Current
16A / 8A
24A / 12A
40A / 20A
48A / 24A
Input AC Power (each phase)
AC type
3-phase, Delta or Y connecting
Voltage range
190-250V (Delta: L-L, Y: L-N)
Frequency range
47-63 Hz
Max. current
Delta: 80A Y: 70A
Delta: 120A Y: 90A
Delta: 200A Y: 160A
Delta: 240A Y: 180A
Measurement
Voltage
Range
150V / 300V
Accuracy
0.2%+0.2%F.S.
Resolution
0.1 V
Current
Range
128/32/8 A peak
192/48/12 A peak
320/80/20 A peak
384/96/24 A peak
Accuracy (rms)
0.4%+0.3%F.S.
Accuracy (peak)
0.4%+0.6%F.S.
Resolution
0.1 A
Power
Accuracy
0.4%+0.4% F.S
Resolution
0.1 W
Efficiency *4
0.75 (Typical)
Protect
UVP, OCP, OPP, OTP, FAN
Interface
GPIB, RS-232, USB, Ethernet (Standard)
Temperature
Operation
0℃~40℃
Storage
-40℃~85℃
Humunity
30 %~90 %
Safety & EMC
CE
Dimension (H x W x D)
1163 x 546 x 700 mm / 45.78 x 21.5 x 27.56 inch
1163 x 1092 x 700 mm / 45.78 x 42.99 x 27.56 inch
Weight
229.4 kg / 505.29 lbs
242.4 kg / 533.92 lbs
480 kg / 1057.27 lbs
495 kg / 1090.31 lbs
Note*1 : Maximum distortion is tested on output 125VAC (150V RANGE) and 250VAC (300V RANGE) with maximum current to linear load.
Note*2 : Load regulation is tested with sine wave and remote sense.
Note*3 : Input power factor is tested on input 220V, full load condiction.
Note*4 : Efficiency is tested on input voltage 230V.
Note*5 : Model 61505 can also use single-phase connecting method of input AC power, the maximum input current is [email protected]
11-28
Model No.
Programmable AC Source
RS-232
GPIB
61700 Series
PFC
The Chroma Programmable AC Power Source model 61700 series
delivers pure, 5-wire, 3-phase AC power. Unlike the traditional
3-phase AC power source, it includes low power rating models
at very low cost. Users can program voltage and frequency,
measure the critical characteristics of the output on its LCD
display. It delivers the right solution to simulate all kinds of input
condition of UUT to be utilized in R&D and QA. It is also suitable
for commercial applications from laboratory testing to mass
productions.
Programmable AC Source
Model 61700 Series
1.5KVA~12KVA
KEY FEATURES
■ Output Rating:
Power: 1.5KVA, 3ø (61701); 3KVA, 3ø (61702)
4.5KVA, 3ø (61703); 6KVA, 3ø (61704); 12KVA, 3ø (61705)
Voltage: 0-150V/0-300V
■ Frequency: 15~1.2kHz
■ Phase angle: 0~360° Programmable
■ Built-in PFC, provides input power factor of over 0.98
■ AC+DC output mode
■ Comprehensive measurement capability,V, Irms, Ipk,
Iinrush, P, PF, CF of current etc.
■ Programmable r.m.s. current limit
■ Turn on, turn off phase angle control
■ Full protection: OP, OC, OV and OT protection
■ Optional GPIB and RS-232 interface
■ Advanced PWM technology delivers high power
density in a compact rack-mountable package
■ User-definable power-on status
■ Built-in output isolation relays
■ Easy use graphic user interface: softpanel (Option)
■ Optional function for transient voltage output, including
LIST, PULSE, STEP ans INTERHARMONICS mode
11-29
The 61700 supplies the output voltage from 0 to 300VAC and it
can be set individually for each phase. Users also can set the
phase angle from 0° to 360°. These kinds of function make
the 61700 series can simulate unbalance 3-phase power. Because
of the wide output frequency from 15 to 1200Hz, it is suitable
for avionics, marine and military application. The AC+DC mode
extends the output function to simulate abnormal situation when
power line contains DC offset.
The 61700 series uses the state-of-the-art PWM technology, so it
is capable to generate very clean AC output with typical distortion
less than 0.3%. With power factor correction circuit, the 61700
series yields higher efficiency and deliver more output power.
waveform for immunity test. The 61700 series can also be
controlled by a powerful and userfriendly softpanel through
GPIB or RS-232 interface. Besides that, the softpanel includes
a waveform editor that can edit up to 40th order harmonic
components. By this way, the 61700 series get the ability to output
distorted waveform as users like.
The self-diagnosis routine and protections against overpower,
over current, over voltage, over temperature and fan fail, the
61700 series ensure the quality and reliability for even the most
demanding engineering testing and production line application.
ORDERING INFORMATION
61701 : Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 1.5KVA
61702 : Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 3KVA
61703 : Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 4.5KVA
61704 : Programmable AC Source 0~300V/DC, 15~1.2kHz, 3ø 6KVA
61705 : Programmable AC Source 0~300V, 15~1.2kHz, 3ø 12KVA
A615001 : Remote Interface Board for 61500/61600/61700 Series
(RS-232 Interface, GPIB Interface)
A617001 : Softpanel for Model 61700 Series
A617002 : Transient voltage output function, including WAVEFORM,
LIST, PULSE, STEP and INTERHARMONICS mode
By using advanced DSP technology, the 61700 series offers
precision and high speed measurements such as RMS voltage,
RMS current, true power, power factor, and current crest factor, etc.
The 61700 series offers an optional function to output transient
voltage. The function includes LIST, PULSE, STEP and
INTERHARMONICS mode. Users can easily program variant
Softpanel
Softpanel of 61700 Series : Main page
Optional Function : LIST Mode Voltage
Transient Output
Aerospace Testing : MIL-STD-704F
Aerospace Testing : RTCA DO-160D
All specifications are subject to change without notice.
Model No.
Programmable AC Source
6000VA
2000VA
12000VA
4000VA
150V/ 300V
0.2%+0.2%F.S.
0.1V
0.3%@50/60Hz
1.5% 15~1.2kHz
0.1%
0.2%
150V/ 300V
0.2%+0.2%F.S.
0.1V
0.3%@50/60Hz
1.5% 15~1.2kHz
0.1%
0.2%
150V/ 300V
0.2%+0.2%F.S.
0.1V
0.3%@50/60Hz
1.5% 15~1.2kHz
0.1%
0.2%
0.02% per degree from 25℃
150V/ 300V
0.2%+0.2%F.S.
0.1V
0.3%@50/60Hz
1.5% 15~1.2kHz
0.1%
0.2%
150V/ 300V
0.2%+0.2%F.S.
0.1V
0.3%@50/60Hz
1.5% 15~1.2kHz
0.1%
0.2%
4A/2A
24A/12A
8A/4A
48A/24A
12A/6A
72A/36A
16A/8A
96A/48A
32A/20A
192A/96A
DC, 15~1.2kHz
0.15%
DC, 15~1.2kHz
0.15%
DC, 15~1.2kHz
0.15%
DC, 15~1.2kHz
0.15%
DC, 15~1.2kHz
0.15%
0~360°
0.3°
< 0.8°@50/60Hz
0~360°
0.3°
< 0.8°@50/60Hz
0~360°
0.3°
< 0.8°@50/60Hz
0~360°
0.3°
< 0.8°@50/60Hz
0~360°
0.3°
< 0.8°@50/60Hz
250W
212V/424V
2A/1A
500W
212V/424V
4A/2A
750W
212V/424V
6A/3A
1KW
212V/424V
8A/4A
2KW
212V/424V
16A/8A
90~250V
47~63Hz
9A Max.
0.97 Min.
90~250V
47~63Hz
16A Max.
0.98 Min.
190~250V
47~63Hz
10A Max.
0.98 Min.
190~250V
47~63Hz
14A Max.
0.98 Min.
190~250V
47~63Hz
28A Max.
0.98 Min
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
150V/300V
0.2%+0.2%F.S.
0.1V
24A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.01A
48A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.01A
72A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.01A
96A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.01A
192A
0.4%+0.3%F.S.
0.4%+0.6%F.S.
0.01A
0.4%+0.4% F.S.
0.1W
0.4%+0.4% F.S.
0.1W
0.4%+0.4% F.S.
0.1W
0.4%+0.4% F.S.
0.1W
0.4%+0.4% F.S.
0.1W
68 %
400 x 482.6 x 600.5 mm /
15.75 x 19 x 23.64 inch
75 kg / 165.2 lbs
77 %
400 x 482.6 x 600.5 mm /
15.75 x 19 x 23.64 inch
75 kg / 165.2 lbs
81 %
400 x 482.6 x 600.5 mm /
15.75 x 19 x 23.64 inch
75 kg / 165.2 lbs
UVP, OCP, OPP, OTP, FAN
82%
400 x 482.6 x 600.5 mm /
15.75 x 19 x 23.64 inch
75 kg / 165.2 lbs
82%
896.4 x 546 x 699.9 mm /
35.28 x 21.5 x 27.56 inch
150 kg / 330.4 lbs
Electrical Safety
Test Instruments
4500VA
1500VA
Passive Component
Test Instruments
3000VA
1000VA
Power Supply
Test Equipment
1500VA
500VA
Optical Inspection
Equipment
61705
Video & Color
Test Equipment
Weight
Protection
Temperature Range
Operation
Storage
Humidity
Safety & EMC
61704
LCD/LCM
Test Equipment
Dimension (H x W x D)
61703
LED
Test Equipment
Line regulation
Load regulation *2
Temp. coefficient
Maximum Current (per phase)
r.m.s.
peak
Frequency
Range
Accuracy
Phase Angle
Range
Resolution
Accuracy
DC Output Rating (per phase)
Power
Voltage
Current
Input 3-Phase Power (per phase)
Voltage range
Frequency range
Current
Power factor *3
Measurement
Voltage (Line-Neutral)
Range
Accuracy
Resolution
Current (per phase)
Range (peak)
Accuracy (r.m.s.)
Accuracy (peak)
Resolution
Power (per phase)
Accuracy
Resolution
Others
Efficiency *4
61702
Semiconductor/IC
Test Equipment
Distortion *1
61701
Solar Cell
Test Equipment
SPECIFICATIONS
Model
AC Output Rating
Max. Power
Per Phase
Voltage (per phase)
Range
Accuracy
Resolution
61700 Series
0℃~40℃
-40℃~85℃
30 %~90 %
CE
General Purpose
Test Instruments
Note*1 : Maximum distortion is tested on output 125VAC (150V RANGE) and 250VAC (300V RANGE) with maximum current to linear load.
Note*2 : Load regulation is tested with sinewave and remote sense.
Note*3 : Input power factor is tested on input 220V, full load condition
Note*4 : Efficiency is tested on input voltage 110V for 61701 and 61702, 220V for 61703, 61704 and 61705.
PXI Instruments
& Systems
All specifications are subject to change without notice.
11-30
Model No.
Programmable AC Source
RS-232
GPIB
APG
6400 Series
PFC
■ Self-test at power-on
■ User-definable power-on state
■ Easy use graphic user interface: softpanel (Option)
Programmable AC Source
Model 6400 Series
375~9000VA
KEY FEATURES
■ Output distortion less than 0.3%, and peak repetitive current
over 2.5 times of the rms current
■ High accuracy measurement of RMS voltage, RMS current,
true power, frequency, power factor, and current crest factor
■ Built-in power factor correction circuit provides input power
factor of over 0.98 to meet IEC regulations
■ Programmable current limit
■ Built-in output isolation relays
■ EEPROM storage of user defined voltage & frequency
combination for instant recall at anytime
■ Optional GPIB, RS-232, Analog Programming interface.
■ Over-voltage, under-voltage, over-power, over-current,
over-temperature, and short circuit protection
■ Temperature controlled fan speed
SPECIFICATIONS - 1
Model
Output / Phase
Output Ratings
Power / Phase
Voltage
Range / Phase
Accuracy
Resolution
Distortion
Line Regulation
Load Regulation
Temp. Coefficient
Max. current -rms
-peak
Frequency
Range
Accuracy
Resolution
Input Ratings
Voltage Range
Frequency Range
Current
Power Factor
Measurement
Voltage / Phase
Range
Accuracy (rms)
Resolution
Current / Phase
Range (peak
Accuracy (rms)
Resolution
Power / Phase
Range
Accuracy
Resolution
Frequency
Range
Accuracy
Resolution
Others
Efficiency
Protection
Safety & EMC
Dimension (H x W x D)
Weight
11-31
The Chroma 6400 series Programmable AC Power Source uses
state of the art PWM technology to deliver pure, instrument grade
AC power at very low cost never achieved before. The 6400 AC
power source offers maximum rated power for any output voltage
from 0 to 300VAC, at any frequency from 45 to 1K Hz. It is not
only suitable for commercial applications(47-63Hz), but also for
avionics, marine, military applications at 400Hz.
The 6400 AC power source is very easy to operate from the front
panel keypad, or from the remote controller via IEEE-488, RS-232
or APG (Analog Programming) interface. The optional interface is
designed as a plug-in card to change the unit in seconds into a
computer controlled system power source.
Designed with self diagnostic routine and protected against
over-voltage, under-voltage, over-power, over-current,
over-temperature and fan fail, the instrument offers quality and
reliability for even the most demanding applications in production
testing, R&D design characterization, and QA verification.
All models generate very clean output with typical distortion less
than 0.3%! Incorporating power factor correction circuit, the 6400
AC power source yields higher efficiency and delivers more output
power than competitive instruments. Furthermore, it is capable
of high peak repetitive current needed to drive most electronic
products with high crest factor input design.
The 6400 AC power source uses advanced circuit to offer
precision and high speed measurement of true RMS voltage, true
RMS current, true power, frequency, power factor, and current crest
factor.
Softpanel of 6400 Series
6404
1
6408
1
6415
1
6420
1
375VA
800VA
1500VA
2000VA
150V/300V/Auto
0.2% F.S. for freq. ≦ 200Hz, 0.4% F.S. for freq. > 200Hz
0.1V
0.1V
typical. 0.3% for freq. ≦ 200Hz, 0.8% for freq.>200Hz
0.1%
0.1%
0.1%
0.1%
0.2% + 0.2% of F.S.
0.1V
0.1V
0.5% for (45-500Hz), 1% for (> 500-1KHz)
0.1%
0.1%
0.1%
0.1%
0.02% per ℃
2.5A/1.25A
7A/3.5A ≦100Hz
5.5A/12.75A >100Hz
5.33A/2.67A
14.92A/7.47A ≦ 100Hz
7.47A/5.87A >100Hz
15A/7.5A
45A/22.5A ≦ 100Hz (45-100Hz)
37.5A/18.75A (>100-1KHz)
20A/10A
60A/30A (45-100Hz)
50A/25A (>100-1KHz)
45-500Hz
0.1%
0.1Hz
45-500Hz
0.1%
0.1Hz
45-1000Hz
0.1%
0.1Hz
45-1000Hz
0.1%
0.1Hz
90-132V / 180-250V
47-63Hz
7.5A max.
0.8 typical.
90-132V (6408-1),180-250V (6408-2)
47-63Hz
12A max.(6408-1), 6A max. (6408-2)
0.98 min.
190-250V, 1Ø
47-63Hz
12A max.
0.95 min.
190-250V, 1Ø
47-63Hz
15A max.
0.97 min.
0-150V/0-300V
0-150V/0-300V
0-150V/0-300V
0.1% + 0.1% F.S.
0-150V/0-300V
0.25% + 0.1% F.S.
0.1V
0.1V
0.1V
0.1V
0-2A/2-10A
0.5% + 0.2% F.S.
0.01A
0-4A/4-20A
0.5% + 0.2% F.S.
0.01A
0-70A
0.4% + 0.2% F.S.
0.01A
0-100A
0.4% + 0.15% F.S.
0.01A
0-375W
0.5% F.S.
0.1 W
0-800W
0.5% F.S.
0.1 W
45-500Hz
0.02%
0.1Hz
45-500Hz
0.02%
0.1Hz
75% typical
80% typical
0-1500W
0-2000W
1% F.S. (CF<6)
1% F.S. (CF<6)
0.1 W for P<1000W, 1W for P>1000W
45-1000Hz
0.02%
0.1Hz
45-1000Hz
0.02%
0.1Hz
80% typical
80% typical
UVP, OVP, OCP, OPP, OTP, Short
CE (Include LVD and EMC Requirement)
133.35 x 482.6 x 471.4 mm / 5.25 x 19 x 18.56 inch
221.5 x 425 x 567 mm / 8.72 x 16.73 x 22.32 inch
18 kg / 39.65 lbs
23 kg / 50.66 lbs
23 kg / 50.66 lbs
27 kg / 59.47 lbs
All specifications are subject to change without notice.
Model No.
Programmable AC Source
3000VA
6000VA
2000VA
3000VA
150V/300V/Auto
0.2% + 0.2% of F.S.
0.1V
0.5% for (45-500Hz), 1% for (> 500-1KHz)
0.1%
0.1%
0.02% per ℃
30A/15A
150V/300V(parallel), 300V/500V(series)
0.2% + 0.2% of F.S.
0.1V
1%
0.1%
0.2%(series), 0.8% (parallel)
0.02% per ℃
60A/30A/15A (150V/300V/500V)
180A/90A/45A (45-100Hz),
150A/75A/38A (>100-1KHz)
150V/300V
0.2% + 0.2% of F.S.
0.1V
1%
0.1%
0.2%(3 phases), 0.8% (1 phase)
0.02% per ℃
20A/10A (150V/300V)
60A/30A (45-100Hz),
50A/25A (>100-1KHz)
150V/300V
0.2% + 0.2% of F.S.
0.1V
1%
0.1%
0.2%(3 phases), 0.8% (1 phase)
0.02% per ℃
30A/15A ( 150V/300V)
90A/45A (45-100Hz),
75A/38A (>100-1KHz)
45-1000Hz
0.1%
0.1Hz
45-1000Hz
0.15%
45-1000Hz
0.15%
0.01Hz (45-99.9Hz), 0.1Hz (100-999.9Hz)
45-1000Hz
0.15%
190-250V, 1Ø
47-63Hz
23A max.
0.98 min.
190-250V, 3Ø
47-63Hz
23A max./phase
0.98 min. under full load
190-250V, 3Ø
47-63Hz
15A max./phase
0.97 min. under full load
190-250V, 3Ø
47-63Hz
23A max./phase
0.98 min. under full load
0-150V/0-300V
0.25% + 0.1% F.S.
0.1V
0-150V/0-300V
0.25% + 0.1% F.S
0.1V
0-150V/0-300V
0.25% + 0.1% F.S
0.1V
0-150V/0-300V
0.25% + 0.1% F.S
0.1V
0-140A
0.4% + 0.1% F.S.
0.01A
0-280A
0.4% + 0.1% F.S.
0.01A
0-100A
0.4% + 0.15% F.S.
0.01A
0-140A
0.4% + 0.1% F.S.
0.01A
0-3000W
1% F.S. (CF<6)
0.1 W for P<1000W, 1W for P>1000W
0-3000W
1% F.S. (CF<6)
0.01 W
0-2000W
1% F.S. (CF<6)
0.01 W
0-3000W
1% F.S. (CF<6)
0.01 W
45-1000Hz
0.02%
0.1Hz
45-1000Hz
0.01%+2 count
0.01Hz
45-1000Hz
0.01%+2 count
0.01Hz
45-1000Hz
0.01%+2 count
0.01Hz
80% typical
UVP, OVP, OCP, OPP, OTP, Short
80% typical
3(45-100Hz), 2.5(>100-1KHz)
Passive Component
Test Instruments
990 x 546 x 700 mm /
38.98 x 21.5 x 27.56 inch
156 kg / 343.61 lbs
6463
6490
6460
Electrical Safety
Test Instruments
6430
General Purpose
Test Instruments
6408
6415
6404
6420
PXI Instruments
& Systems
All specifications are subject to change without notice.
80% typical
6400 Series Programmable AC Source Family
ORDERING INFORMATION
6404 : Programmable AC Source 0~300V/45-500Hz/375VA
6408-1: Programmable AC Source 0~300V/45-500Hz/800VA (input rating 90-132V)
6408-2 : Programmable AC Source 0~300V/45-500Hz/800VA (input rating 180-250V)
6415 : Programmable AC Source 0~300V/45-1000Hz (1500VA)
6420 : Programmable AC Source 0~300V/45-1000Hz (2000VA)
6430 : Programmable AC Source 0~300V/45-1000Hz (3000VA)
6460-2 : Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø, input 3Ø 220V
6460-3 : Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø, input 3Ø 380V
6463-2 : Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø or 3Ø Selectable, input 3Ø 220V
6463-3 : Programmable AC Source 0~300V/45-1000Hz (6000VA), output 1Ø or 3Ø Selectable, input 3Ø 380V
6490-2 : Programmable AC Source 0-300V/45-1000Hz (9000VA), output 1Ø or 3Ø Selectable, input 3Ø 220V
6490-3 : Programmable AC Source 0-300V/45-1000Hz (9000VA), output 1Ø or 3Ø Selectable, input 3Ø 380V
A640002 : Remote Interface for Model 6415/6420/6430 Series (External V Input, RS-232 Interface, GPIB Interface)
A640003 : Remote Interface for Model 6404/6408 Series (External V Input, RS-232 Interface, GPIB Interface)
A640004 : Softpanel for Model 6400 Series
A610004 : Universal Socket Center for Model 6415/6420/ 6430 Series
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
Power Supply
Test Equipment
221.5 x 425 x 567 mm /
8.72 x 16.73 x 22.32 inch
27 kg / 59.47 lbs
80% typical
OPP, OLP, OTP, FAN Fail
CE (Include LVD and EMC Requirement)
765.94 x 546 x 700 mm /
990 x 546 x 700 mm /
30.16 x 21.5 x 27.56 inch
38.98 x 21.5 x 27.56 inch
107 kg / 235.68 lbs
156 kg / 343.61 lbs
Optical Inspection
Equipment
6490
1 or 3 selectable
Video & Color
Test Equipment
6463
1 or 3 selectable
LCD/LCM
Test Equipment
Weight
6460
1 (parallel or series)
LED
Test Equipment
Dimension (H x W x D)
6430
1
Semiconductor/IC
Test Equipment
Peak Current/phase-crest-factor
Frequency
Range
Accuracy
Resolution
Input Ratings
Voltage Range
Frequency Range
Current
Power Factor
Measurement
Voltage / Phase
Range
Accuracy (rms)
Resolution
Current / Phase
Range (peak)
Accuracy (rms)
Resolution
Power / Phase
Range
Accuracy
Resolution
Frequency
Range
Accuracy
Resolution
Others
Efficiency
Protection
Safety & EMC
Solar Cell
Test Equipment
SPECIFICATIONS -2
Model
Output / Phase
Output Ratings
Power / Phase
Voltage
Range / Phase
Accuracy
Resolution
Distortion
Line Regulation
Load Regulation
Temp. Coefficient
Max. current -rms / Phase
6400 Series
11-32
Model No.
Programmable AC Source
RS-232
Programmable AC Source
Model 6500 Series
1200VA~9000VA
KEY FEATURES
■ Direct Digital Synthesis (DDS) waveform generation
■ Programmable Sine, Square, or Clipped Sine waveform output
■ Programmable voltage, current limit, frequency, phase, and
distortion
■ Power line disturbances simulation capability
■ 30 factory installed harmonic waveforms in the waveform
library
■ User programmable harmonic waveforms
■ User programmable sequential output waveforms for
auto-execution
■ Powerful measurement of Vrms, Irms, Ipk+, Ipk-, power,
frequency, crest factor, power factor, inrush current, VA,
VAR, etc.
■ Built-in power factor correction circuit provides input power
factor of over 0.98 to meet the IEC regulations
■ Advanced PWM technology to deliver high power output in a
light and compact rackmountable package
■ Built-in output isolation relays
■ User-definable power-on state
■ TTL output to signal any output transition for ATE application
■ Analog Programming Interface for external amplitude control
■ Optional GPIB, RS-232 interface
■ List mode transient power line disturbances simulation for
Voltage Dip & Variation to meet IEC 61000-4-11
■ Easy use graphic user interface: softpanel (Option)
GPIB
6500 Series
PFC
The global AC power testing requirements demand more
sophisticated AC Power Source that is capable of simulating a
wide variety of AC line conditions, harmonic waveforms, accurate
power measurement and analysis. The Chroma 6500 series
Programmable AC Power Source delivers the right solution to
simulate all kinds of normal/abnormal input conditions and
measure the critical characteristics of the product under test. It can
be used for R&D design characterization, production testing, and
QA verification of commercial, industrial, and aerospace electronic
products.
factory installed, and testing for compliance to AC line harmonic
immunity standards can be easily achieved in the field.
The Chroma 6500 series delivers maximum rated power for any
output voltage up to 300 Vac, and at any frequency between 15Hz
to 2000Hz. It is suitable for commercial applications (47-63Hz);
for avionics,marine, military applications at 400Hz or higher
frequency; or for electrical motor, air-conditioner test applications
at 20Hz. All models generate very clean sine or square waveforms
output with typical distortion less than 0.5%.
The 6500 series is very easy to operate from the front panel
keypad, or from a remote controller via GPIB, RS-232 bus or APG
(Analog Programming) interface. Instrument drivers are available
to integrate the AC source into any ATE application operating
under Labview control.
The Chroma 6500 series has built-in Direct Digital Synthesis
(DDS) Waveform Generator to provide user programmable high
precision waveform. For testing products under AC line distortion
conditions, clipped sinewave can be generated with 0% to 43%
distortion and amplitude from 0% to 100%. It also can simulate
all kinds of power line disturbances such as cycle dropout,
transient spike, brown out, phase angle, voltage and frequency
ramp up (ramp down), etc.. Up to 30 harmonic waveforms are
The 6500 series has built-in 16-bit precision measurement circuit
to offer precision and high speed measurement of Vrms, Irms,
Ipk+, Ipk-, power, frequency, crest factor, power factor, inrush
current, VA, VAR, etc. It is designed as an integral part of the PMS
power measurement system. By adding the 6630 Power Analyzer
it becomes an ATE for testing IEC 61000-3-2 harmonic and IEC
61000-3-3 flicker measurement.
Designed with self diagnostic routine and protected against
overload, overpower, overtemperature, overcurrent and fan fail,
the instrument offers quality and reliability for even the most
demanding production line applications.
ORDERING INFORMATION
6512 : Programmable AC Source 0~300V/15~2KHz / 1.2KVA
6520 : Programmable AC Source 0~300V/15~2KHz / 2KVA
6530 : Programmable AC Source 0~300V/15~2KHz / 3KVA
6560-2 : Programmable AC Source 0~500V/45~1KHz / 6KVA I/P
3Ø 220V
6560-3 : Programmable AC Source 0~500V/45~1KHz / 6KVA I/P
Main operation menu
3Ø 380V
6590-2 : Programmable AC Source 0~300V/45~1KHz / 9KVA 1Ø
or 3Ø, 3000VA per phase, I/P 3Ø 220V
6590-3 : AC Power Source 0~300V/45~1KHz / 9KVA 1Ø or 3Ø,
3000VA per phase, I/P 3Ø 380V
A650001 : Remote Interface for Model 6500 Series
(External V Reference, RS-232 interface, Printer Interface, GPIB
Interface, Special I/O Port , System I/O Port)
A650002 : 19" Rack Mounting Kit for Model 6512/6520/6530
A650003 : Softpanel for Model 6500 Series
A610004 : Universal Socket Center for Model 6512/6520/6530/
List Mode: Transient voltage programming
6500 Series Programmable AC Source Family
6560 Series
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
6590
6560
6530
6512
6520
11-33
All specifications are subject to change without notice.
Model No.
Programmable AC Source
6520
1
6530
1
6560
1 (parallel or series)
6590
1or 3 selectable
1200VA
2000VA
3000VA
6000VA
3000VA per phase,
9000VA total
Range/phase
150V / 300V / Auto
150V / 300V / Auto
150V / 300V / Auto
Accuracy
Resolution
0.2% +0.2%of F.S.
0.1V
1% (15~45 Hz)
0.5% (> 45~500 Hz)
1% (> 500~1K Hz)
2% (> 1K~2K Hz)
0.1%
0.1%
0.02% per℃
0.2% +0.2%of F.S.
0.1V
1% (15~45 Hz)
0.5% (> 45~500 Hz)
1% (> 500~1K Hz)
2% (> 1K~2K Hz)
0.1%
0.1%
0.02% per℃
0.2% +0.2%of F.S.
0.1V
1% (15~45 Hz)
0.5% (> 45~500 Hz)
1% (> 500~1K Hz)
2% (> 1K~2K Hz)
0.1%
0.1%
0.02% per℃
rms
12A/6A (150V / 300V)
20A/10A (150V / 300V)
peak
36A/18A (15~100Hz)
30A/15A (>100~1KHz)
24A/12A (>1K~2KHz)
Power
Semiconductor/IC
Test Equipment
6512
1
Solar Cell
Test Equipment
SPECIFICATIONS
Model
Output Phase
Output Ratings
6500 Series
Voltage
Resolution
0.1%
0.2%
0.02% per℃
30A/15A (150V / 300V)
60/30/15A (150/300/500V)
30A/15A (150V / 300V)
90A/45A total
60A/30A (15~100Hz)
50A/25A (>100~1KHz)
40A/20A (>1K~2KHz)
90A/45A (15~100Hz)
75A/38A (>100~1KHz)
60A/30A (>1K~2KHz)
180/90/45A (45~100Hz)
150/75/38A (>100~1KHz)
90A/45A (45~100Hz)
75A/38A (>100~1KHz)
15 ~ 2K Hz
0.15%
0.01 Hz (15 ~ -99.9 Hz)
0.1 Hz (100 ~ 999.9 Hz)
0.2 Hz (1K ~ 2K Hz)
15 ~ 2K Hz
0.15%
0.01 Hz (15 ~ 99.9 Hz)
0.1 Hz (100 ~ 999.9 Hz)
0.2 Hz (1K ~ 2K Hz)
15 ~ 2K Hz
0.15%
0.01 Hz (15 ~ 99.9 Hz)
0.1 Hz (100 ~ 999.9 Hz)
0.2 Hz (1K ~ 2K Hz)
45 ~ 1K Hz
0.15%
45 ~ 1K Hz
0.15%
0.01 Hz (45 ~ 99.9Hz)
0.1 Hz (100 ~ 999.9 Hz)
0.01 Hz (45 ~ 99.9Hz)
0.1 Hz (100 ~ 999.9 Hz)
190 ~ 250 V, 1ø
47 ~ 63 Hz
10A max.
0.95 min. under full load
190 ~ 250 V, 1ø
47 ~ 63 Hz
15A max.
0.97 min. under full load
190 ~ 250 V, 1ø
47 ~ 63 Hz
23A max.
0.98 min. under full load
190 ~ 250 V, 3ø
47 ~ 63 Hz
23A max./phase
0.98 min. under full load
190 ~ 250 V, 3ø
47 ~ 63 Hz
23A max./phase
0.98 min. under full load
0 ~ 150V / 0 ~ 300V
0.25% + 0.1% F.S.
0.1V
0 ~ 150V / 0 ~ 300V
0.25% + 0.1% F.S.
0.1V
0 ~ 150V / 0 ~ 300V
0.25% + 0.1% F.S.
0.1V
0 ~ 150V / 0 ~ 300V
0.25% + 0.1% F.S.
0.1V
0 ~ 150V / 0 ~ 300V
0.25% + 0.1% F.S.
0.1V
0 ~ 60 A
0.4% + 0.25%F.S.
0.4% + 0.5%F.S.
0.01A
0 ~ 100 A
0.4% + 0.15%F.S.
0.4% + 0.3% F.S.
0.01A
0 ~ 140 A
0.4% + 0.1%F.S.
0.4% + 0.2% F.S.
0.01A
0 ~ 280 A
0.4% + 0.1%F.S.
0.4% + 0.2% F.S.
0.01A
0 ~ 140 A
0.4% + 0.1%F.S.
0.4% + 0.2% F.S.
0.01A
1% F.S. ( CF<6)
0.01W
1% F.S. ( CF<6)
0.01W
1% F.S. ( CF<6)
0.01W
1% F.S. ( CF<6)
0.01W
1% F.S. ( CF<6)
0.01W
15 ~ 2K Hz
0.01% +2 count
0.01Hz
15 ~ 2K Hz
0.01% +2 count
0.01Hz
15 ~ 2K Hz
0.01% +2 count
0.01Hz
45 ~1K Hz
0.01% +2 count
0.01Hz
45 ~1K Hz
0.01% +2 count
0.01Hz
80% typical
80% typical
80% typical
OPP, OLP, OTP, FAN Fail
80% typical
80% typical
0 ~ 40℃
-40 ~ +85℃
0 ~ 40℃
-40 ~ +85℃
Electrical Safety
Test Instruments
0 ~ 40℃
-40 ~ +85℃
General Purpose
Test Instruments
26.4 kg / 58.15 lbs
Weight
Note*1 : Test under output voltage from half to full range.
Note*2 : Test with sinewave & with remote sense.
Passive Component
Test Instruments
221.5 x 425 x 567 mm /
8.72 x 16.73 x 22.32 inch
0 ~ 40℃
0 ~ 40℃
-40 ~ +85℃
-40 ~ +85℃
CE (Include LVD and EMC Requirement)
221.5 x 425 x 567 mm /
221.5 x 425 x 567 mm /
765.94 x 546 x 700 mm /
8.72 x 16.73 x 22.32 inch
8.72 x 16.73 x 22.32 inch
30.16 x 21.5 x 27.56 inch
26.4 kg / 58.15 lbs
26.4 kg / 58.15 lbs
107 kg / 235.68 lbs
Power Supply
Test Equipment
Dimension (H x W x D)
0.1%
0.2% (series), 0.8% (parallel)
0.02% per℃
Optical Inspection
Equipment
Input Ratings
Voltage Range
Frequency Range
Current
Power Factor
Measurement
Voltage/Phase
Range
Accuracy (rms)
Resolution
Current/Phase
Range (peak)
Accuracy (rms)
Accuracy (peak)
Resolution
Power/Phase
Accuracy
Resolution
Frequency
Range
Accuracy
Resolution
Others
Efficiency
Protection
Temperature
Operating
Storage
Safety & EMC
1% (45~1K Hz)
Video & Color
Test Equipment
Frequency
Range
Accuracy
1% (45~1K Hz)
LCD/LCM
Test Equipment
Line Regulation
Load Regulation *2
Temp. Coefficient
Max. Current/Phase
0.2% +0.2%of F.S.
0.1V
150V / 300V
LED
Test Equipment
Distortion *1
150V / 300V (parallel)
300V / 500V (series)
0.2% +0.2%of F.S.
0.1V
888.5 x 546 x 700 mm /
34.98 x 21.5 x 27.56 inch
156 kg / 343.61 lbs
PXI Instruments
& Systems
All specifications are subject to change without notice.
11-34
Model No.
Power Analyzer
RS-232
GPIB
6630/6632
PFC
Chroma introduces a completely new concept, Power
Measurement System, for fast and accurate power related
measurements in compliance with international standards.
Power Analyzer
Model 6630/6632
KEY FEATURES
■ Test Voltage and Current Harmonics in compliance with
IEC61000-3-2, IEC61000-3-2 A14
■ Test Flicker (voltage fluctuations) precompliance with
IEC61000-3-3
■ Advanced DFT and DSP technology
■ Multi-processor system configuration
■ Modular instrument with three measurement modules in
DSP type
■ 5 unique test function modules with Harmonics, Flickers,
Multimeter, Recording, and Waveform for multipurpose test
application requirements
■ Harmonic analysis and bar graph / table results display up to
40 harmonics
■ 2-channel 18-bit A/D converter in each measurement module
■ Simultaneous presentation for voltage and current curves.
(1~16 periods)
■ Preprogrammed functions against standardized limits
■ Wide voltage (6V to 2000Vpk) and current(0.1A to 300Apk)
input range
■ 3½" floppy driver for software update and result storage
(Model 6630 only)
The Power Measurement System consisting of an advanced
6630/6632 Power Analyzer and a 6530 Series or other Chroma
family AC Power Source is the ATE for Voltage and Current
Harmonics test in compliance with IEC61000-3-2, IEC61000-3-2
A14, and for Flicker test (voltage fluctuations) following the
IEC 61000-3-3 international standards. Performance testing is
preprogrammed limits to specifications against standardized
limits. The user-specified limits can be added.
Chroma 6630/6632 Power Analyzer is a modular instrument
that is equipped with DSP type measurement module. Each
measurement module contains Processor, Memory (ROM, RAM,
Flash ROM), and two channels 18 bits A/D converter. As the
Discrete Fourier Transform (DFT) technology is implemented in
the software with 32-bit floating point mathematical algorithms, it
SPECIFICATIONS
Model
Display
Printer output for hardcopy
Floppy drive
Rack mounting
Dimension (H x W x D)
Weight
Operating environment
Storage environment
Power supply
Power line frequency
Power consumption
Protection
Safety
EMC
Warranty
Model 6632
can measure instruments related power at high- speed and analyze
the measurement parameters (value) accurately. The instrument is
also a combination of all standard instruments generally used for
power measurements. It provides Voltage (U), Current (I), Active
Power (P), Reactive Power (Q), Apparent Power (S), Active Energy
(W), Reactive Energy (Wr), Apparent Energy (Wa), Frequency (f),
Crest Factor (CF), Power Factor (PF), Phase Angle (ø).
Chroma 6630/6632 Power Analyzer is a flexible and unique
multipurpose instrument designed for using stand-alone and
integrated. Harmonics, Flicker, Multimeter, Recording, and
Waveform are the five major function modules that can work
stand-alone, or be integrated into an ATE environment to facilitate
the system for testing and analysis. Future revisions of the
supported standards are able to implement by software updates.
The built in floppy disk drive gives users a convenient way to save
the test parameters and results.
6630
6632
LCD 640x480 pixels with backlight
-Parallel (Centronics compatible) or serial (RS232)
1.44MB 3” PC-format. For software
-updates and result storage
With optional rack mount kit. Size 19” 3HE
132.6 x 423 x 331 mm / 5.22 x 16.67 x 13.07 inch
Single phase 9 kg / 20 lbs, three phase 11.4 kg / 25 lbs
0 to +40℃, < 80 % R.H. non condensing
-30 to + 60℃ non condensing
100-130V or 200~240V, automatic range selection
50/60 Hz
45 W max.
Fuse 2xF1A on rear panel
Designed to comply with the Low Voltage
Directive 73/23/EEC plus parts of 93/68/EEC.
Applied standard, EN61010-1:1993, Installation category II.
Designed to comply with the EMC Directive 89/336/EEC and 92/31/EEC
Applied standards, EN50081-1:92 and EN50082-1:92
One year from date of delivery for manufacturing and material failures
ORDERING INFORMATION
6630 : Power Analyzer, 1ø DSP
6630 : Power Analyzer, 3ø DSP
6630 : Power Analyzer, 1ø DSP without Flicker
6630 : Power Analyzer, 3ø DSP without Flicker
6632 : Power Analyzer, 1ø DSP
6632 : Power Analyzer, 3ø DSP
A663003 : Measurement Input Cables
A663004 : Rack Mounting Kit for Model 6630/6632
A663008 : Spare Current Measurement Input Fuse
A663009 : Measurement Fixture
A663010 : DSP Measurement Module
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
A663010: DSP Measurement Module
A663009: Measurement Fixture
11-35
All specifications are subject to change without notice.
Model No.
Digital Power Meter
150/300/500Vrms (CF = 1.6)
(0.1% + 0.05%*KHz) of rdg + 0.08% of rng
1MΩ
0.01/0.1/0.4/2 Arms (CF=4) *1
(0.1% + 0.05%*KHz) of rdg + 0.25% rng
Power
Range (W)
1.5W ~ 1000W, 12 ranges
Accuracy *3
0.006+(0.003/PF)/KHz
1.5W ~ 10KW, 24 ranges
SHUNT H: [0.2%+0.1%*KHz+(0.3/PF)%*KHz]
of rdg + 0.2% of rng
SHUNT L & 20A: [0.2%+0.1%*KHz+(0.3/PF)%*KHz]
of rdg + 0.33% of rng
300V x 0.01A Range: 0.2% of rdg + 7mW
0.006+(0.003/PF)/KHz
DC, 15Hz ~ 10KHz
Voltage (10 ~ 100% of the voltage range)
DC, 15Hz ~ 10KHz
Voltage (10 ~ 100% of the voltage range)
[0.2%+0.1%*KHz+(0.3/PF)%*KHz]
of rdg + 0.33% of rng
300V x 0.01A Range: 0.2% of rdg + 7mW
Softpanel for Model 66200 Series
PXI Instruments
& Systems
Power Efficiency Test Softpanel
All specifications are subject to change without notice.
General Purpose
Test Instruments
5 Digits
Min. 0.5 sec
90V ~ 130V /180V ~ 250V, 50Hz/ 60Hz, 30VA
Option: USB or GPIB+USB
Voltage: (0.012% of rdg + 0.05% of rng)/℃
Temperature Coefficient
Current: range 0.01A & 0.2A(CF = 2): (0.012% of rdg + 0.05% of rng)/℃
Typical @ 23 ± 5℃
For the other ranges: (0.012% of rdg + 0.05% of rng)/℃
Operating Temperature
0℃ ~ 40℃
Storage
-40℃ ~ 85℃
Safety & EMC
CE (include EMC & LVD)
Dimension (H x W x D)
88 x 212 x 48.1 mm / 3.46 x 8.35 x 13.7 inch (excluding projections)
Weight
3.8 kg / 8.37 lbs
The specifications are valid only after the power meter is turned on more than one hour in a thermally stable environment.
Note*1 : The maximum measurable current of 66201 is 4 Arms.
Note*2 : The current accuracy applies temperature range 23 ± 1℃ for 0.01A & 0.2A(CF=2). For all the other current ranges,
the spec. applied under 23 ± 5℃.
Note*3 : The 300V x 0.01A range is usually used to test No-load condition of UUT.
Note*4 : The PF spec. applies only when the signals are higher then 50% of the selected voltage and current ranges.
A662003 : Measurement Test Fixture
Electrical Safety
Test Instruments
Power Factor accuracy *4
Frequency
Range
Measuring Input
Others
Display Resolution
Display update rate
Power Supply
Interface
SHUNT H: 0.2/2/8/20Arms
([email protected]/2/8A, CF = [email protected] 20A)
SHUNT L: 0.01/0.1/0.4/2Arms (CF=4)
SHUNT H:(0.1%+0.05%*KHz) of rdg+0.12% rng
SHUNT L&20A:(0.1%+0.05%*KHz) of rdg+0.25% rng
Passive Component
Test Instruments
Accuracy *2
150/300/500Vrms (CF = 1.6)
(0.1% + 0.05%*KHz) of rdg + 0.08% of rng
1MΩ
Power Supply
Test Equipment
Range
V, Vpk, I, Ipk, W, VA, VAR, PF, CF_I, F
ORDERING INFORMATION
66201 : Digital Power Meter
66202 : Digital Power Meter
A662001 : USB Remote Interface Board
A662002 : GPIB+USB Remote Interface Board
A662003 : Measurement Test Fixture (250V/15A)
A662004 : Rack Mounting Kit for 66200 Series
A662005 : USB Cable (180cm)
A662006 : External CT 50 Arms for Model 66202
A662007 : External CT 100 Arms for Model 66202
A662008 : Power Efficiency Test Softpanel
A662009 : Softpanel for Model 66200 Series
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
Optical Inspection
Equipment
AC Voltage
Range
Accuracy
Input Resistance
AC Current
66202
1
V, Vpk, I, Ipk, Is, W, VA, VAR, PF,
CF_I, F, THD_V, THD_I, Energy
The Model 66202 includes a 2-shunt design to get 66202 highly
accurate for both low and high current measurements. Besides
the parameters measured on Model 66201, it also provides
Inrush Current, Total Harmonic Distortion of V/I and Energy
measurement. With these practical functions, The Model 66202
is suitable for the most demanding of R&D and quality control
departments.
Video & Color
Test Equipment
Parameters
66201
1
The Model 66201 includes simple measurement functions
designed for testing at low power levels (maximum current 4A).
Examples of these devices are AC adapters, battery chargers, LCD
monitors and similar devices. Included measurement data is
Voltage (Vrms, Vpeak+, Vpeak-), Current (Irms, Ipeak+, Ipeak-),
Power (W, Power Factor, Apparent Power VA, Reactive Power
VAR), Current Crest Factor and Frequency. The Model 66201
Power meter is competitively priced to be suitable for bench-top
testing and automated production line testing.
LCD/LCM
Test Equipment
SPECIFICATIONS
Model
Channel
The 66200 series Power Meter is also designed to meet ENERGY
STAR / IEC 62301 measurement requirements. The instrument
provides 10 mA minimum current range and 1 mW power
resolution providing less than 2% uncertainty for No-Load mode
power measurement. Included are not only traditional averaging
methods but also accumulated energy approach method used
to calculate active power data. In this way, users can achieve
accurate readings even if power consumption levels are not stable
or operating on in non-linear modes (i.e. hiccup modes). The
Model 66202 can even measure Total-Harmonic-Distortion (THD)
and to user-specify distortion orders. Thus, the instrument can
easily measure distortion values up to and including the 13th
harmonic as required by ENERGY STAR requirements. The 66200
Power Meter also includes perform GO/NG functions. This feature
allows users to set pass/fail limits to automatically display PASS/
FAIL according to these user-define criteria.
LED
Test Equipment
KEY FEATURES
■ Embedded high speed DSP, 16 bits Analog/ Digital converters
■ 10 mA minimum current range and 1 mW power resolution
■ Meet ENERGY STAR / IEC 62301 measurement requirement
■ Accumulated energy methods for unstable power measurement
■ User-define Criteria for Automatic PASS/FAIL judgment
■ Half rack width and small 2U height, suitable for system
integration
■ Dual shunts for current range selection providing high
accuracy over a wide current range (66202)
■ THD and user-specify orders distortion measurement (66202)
■ Inrush current and Energy measurement (66202)
■ Optional remote interface: USB or GPIB+USB
■ Voltage/current harmonics measurement up to 50 orders
Chroma Digital Power Meter 66200 series is a single-phase power
meter designed for measurement of AC or AC+DC power signals
and related parameters common to most electronic products.
Instead of traditional analog measurement circuits, the Power
Meter 66200 uses state-of-the-art DSP digitizing technology.
The internal 16 bits analog/digital converters with sampling rates
of up to 240KHz provide both high speed and high accuracy
measurements to be achieved. The instrument's provides
excellent function and stability compared to other available power
meters of this class current on the market. It includes a front panel
4 display area with 5 digitsd, 7-segment LED readouts as well as
optional remote control using USB or GPIB interfaces.
Semiconductor/IC
Test Equipment
Digital Power Meter
Model 66200 Series
GPIB
Solar Cell
Test Equipment
USB
66200 Series
11-36
RS-232
Programmable DC Power Supply
Model 62000P Series
600W, 1200W, 2400W, 5000W
KEY FEATURES
■ Wide range of voltage & current combinations with constant
power
■ Voltage range: 0 ~ 600V
Current range: 0 ~ 120A
Power range: 600W, 1200W, 2400W, 5000W
■ Digital encoder knobs, keypad and function keys
■ Power Factor Correction (0.95)
■ High-speed Programming
■ Precision V&I Measurements
■ Current sharing for parallel operation with Master/Slave
Control
■ Voltage vamp function : Time Range (10ms~99 hours)
ELECTRICAL SPECIFICATIONS-1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation
Voltage
Current
Load Regulation
Voltage
Current
Voltage Measurement
Range
Accuracy
Current Measurement
Range
Accuracy
Output Noise (0 ~ 20MHz)
Voltage Ripple (P-P)
Voltage Ripple (rms)
Current Ripple (rms)
OVP Adjustment Range
GPIB
Ethernet
62000P Series
PFC
■ Auto Sequencing Programming:
10 Programs /100 Sequences / 8 bit TTL
■ Voltage & Current Slew Rate Control
■ OVP, Current Limit, Thermal protection
■ Remote sense, 5V line loss compensation
■ APG (Analog Programmable Interface) with Isolated Analog
Interface Card
■ Optional GPIB control with SCPI
■ Standard RS-232 interface
■ Standard USB interface
■ LabView and Labwindows
■ CE Certified
■ Optional Ethernet interface
The 62000P Series includes 12 different models ranging from
600W to 5000W, up to 120A and up to 600V. Due to their constant
power operating envelope a single instrument can provide both high
voltage/low current AND low voltage/ high current thereby reducing
the number of supplies needed in typical ATE applications.
Chroma’s new 62000P Series of programmable DC power supplies
offer many unique advantages for ATE integration and testing. These
advantage include a constant power operating envelope, precision
readback of output current and voltage, output trigger signals as
well as the ability to create complex DC transients waveforms to
test device behavior to spikes, drops, and other voltage deviations.
Designed for automated testing DC-DC converters and similar
products, the 62000P sets a new standard for high accuracy
programmable DC supplies.
Another unique capability of the 62000P supplies is their ability
to create complex DC transient waveforms. This capability allows
devices to be tested to DC voltage dropouts, spikes and other voltage
variations making them an ideal choice for airborne device testing,
inverter testing and other devices which will experience voltage
interrupts. Applications include DC/DC Converter & Inverter voltage
drop test, engine start-up simulation, battery automated charging,
electronic product life cycle test, and etc.
The 62000P also includes 16 bit readback capability for accurate
voltage and current readings. This means systems no longer need
complex shunt/multiplexers to make accurate readings of the UUT’s
input parameters. The instruments also include I/O ports providing 8
bit TTLs, DC-ON, fault output signal and remote inhibit as well as a
output trigger signal for system timing measurements.
62006P-30-80
62006P-100-25
62006P-300-8
62012P-40-120
62012P-80-60
62012P-100-50
0~30V
0~80A
600W
0~100V
0~25A
600W
0~300V
0~8A
600W
0-40V
0-120A
1200W
0~80V
0~60A
1200W
0~100V
0~50A
1200W
0.01%+2mV
0.01%+25mA
0.01%+6mV
0.01%+5mA
0.01%+18mV
0.03%+20mA
0.01%+2mV
0.01%+25mA
0.01%+8mV
0.01%+10mA
0.01%+10mV
0.01%+12mA
0.01%+3mV
0.01%+10mA
0.01%+10mV
0.01%+5mA
0.01%+50mV
0.03%+40mA
0.01%+3mV
0.01%+10mA
0.01%+12mV
0.01%+20mA
0.01%+18mV
0.01%+28mA
6V/30V
0.05% + 0.05%F.S.
20V/100V
0.05% + 0.05%F.S.
60V/300V
0.05% + 0.05%F.S.
8V/40V
0.05% + 0.05%F.S.
16V/80V
0.05% + 0.05%F.S.
20V/100V
0.05% + 0.05%F.S.
16A/80A
0.1% + 0.2%F.S.
5A/25A
0.1% + 0.2%F.S.
1.6A/8A
0.1% + 0.1%F.S.
24A / 120A
0.1% + 0.1%F.S..
12A/60A
0.1% + 0.1%F.S.
10A/50A
0.1% + 0.1%F.S.
60 mV
8 mV
60 mA
110% of Vset to
110% of Vmax
85 mV
10 mV
10 mA
110% of Vset to
110% of Vmax
180 mV
90 mV
60 mA
110% of Vset to
110% of Vmax
90 mV
10 mV
120 mA
110% of Vset to
110% of Vmax
100 mV
10 mV
30 mA
110% of Vset to
110% of Vmax
100 mV
15 mV
20 mA
110% of Vset
to 110% of Vmax
0.01V - 10V/ms
0.001A - 1A/ms
0.001V - 5V/ms
0.001A - 1A/ms
0.001V - 10V/ms
0.001A - 1A/ms
0.001V - 10V/ms
0.001A - 1A/ms
30 ms
2.5 s(max)
0.75
8 ms
240 ms(max)
0.8
8 ms
240 ms(max)
0.8
10 ms
300 ms(max)
0.8
0.02% of Vmax
0.04% of Imax
0.02% of Vmax
0.04% of Imax
0.02% of Vmax
0.04% of Imax
0.02% of Vmax
0.04% of Imax
0.02% of Vmax/℃
0.04% of Imax/℃
3 mS
250 mV
400V
95 to 250Vac
0~40℃
0.02% of Vmax/℃
0.04% of Imax/℃
3 mS
250 mV
500V
95 to 250Vac
0~40℃
13 kg / 28.63 lbs
12.1 kg / 26.65 lbs
Slew Rate Range
Voltage (with USB)
0.001V - 5V/ms
0.001V - 10V/ms
Current (with USB)
0.001A - 1A/ms
0.001A - 1A/ms
Programming Response Time (Typical)
Rise Time (Full & No Load)
6 ms
10 ms
Fall Time
350ms(max)
300 ms(max)
Efficiency
0.75
0.75
Drift (8 hours)
Voltage
0.02% of Vmax
0.02% of Vmax
Current
0.04% of Imax
0.04% of Imax
Temperature Coefficient
Voltage
0.02% of Vmax/℃
0.02% of Vmax/℃
Current
0.04% of Imax/℃
0.04% of Imax/℃
Transient Response Time
3 mS
3 mS
10 % step change
150 mV
180 mV
Voltage limit @ Series Mode
150V
500V
AC Input Voltage Ranges
95 to 250Vac
95 to 250Vac
Operating Temperature
0~40℃
0~40℃
Dimension ( H x W x D)
Weight
12kg / 26.43 lbs
12.1 kg / 26.65 lbs
11-37
USB
Model No.
Programmable DC Power Supply
0.02% of Vmax/℃
0.02% of Vmax/℃
0.04% of Imax/℃
0.04% of Imax/℃
3mS
3mS
600 mV
150 mV
800V
200V
95 to 250Vac
95 to 250Vac
0~40℃
0~40℃
89 x 430 x 425 mm / 3.5 x 16.93 x 16.73 inch
11.2 kg / 24.67 lbs
12kg / 26.43 lbs
All specifications are subject to change without notice.
Model No.
Programmable DC Power Supply
62024P-600-8 *1
62050P-100-100
0~100V
0~50A
2400W
0-600V
0-8A
2400W
0~100V
0~100A
5000W
0.01%+10mV
0.01%+12mA
0.01%+18mV
0.03%+20mA
0.01%+8mV
0.01%+24mA
0.01%+18mV
0.01%+28mA
0.01%+50mV
0.03%+40mA
0.01%+12mV
0.01%+56mA
20V/100V
0.05% + 0.05%F.S.
120V / 600V
0.05% + 0.05%F.S.
20V/100V
0.05% + 0.05%F.S.
10A/50A
0.1% + 0.1%F.S.
1.6A / 8A
0.1% + 0.1%F.S.
20A/100A
0.1% + 0.1%F.S.
100 mV
15 mV
20 mA
110% of Vset
to 110% of Vmax
180 mV
90 mV
60 mA
110% of Vset
to 110% of Vmax
50 mV
15 mV
40 mA
110% of Vset
to 110% of Vmax
0.001V - 10V/ms
0.001A - 1A/ms
0.01V - 10V/ms
0.001A - 1A/ms
0.001V - 10V/ms
0.001A - 2A/ms
10 ms
300 ms(max)
0.85
60 ms
5 s(max)
0.8
10 ms
850 ms(max)
0.85
0.02% of Vmax
0.04% of Imax
0.02% of Vmax
0.04% of Imax
0.02% of Vmax
0.04% of Imax
0.02% of Vmax/℃
0.04% of Imax/℃
3mS
250 mV
500V
190 to 250Vac
(single phase)
0~40℃
0.02% of Vmax/℃
0.04% of Imax/℃
3mS
600mV
800V
190 to 250Vac
(single phase)
0~40℃
0.02% of Vmax/℃
0.04% of Imax/℃
3mS
250 mV
500 V
190 to 250Vac (3 phase 4 wire, Delta connection)
or 342 to 440Vac(3phase 5 wire, Y connection)
0~40℃
176 x 428 x 566 mm /
6.93 x 16.85 x 22.28 inch
28 kg / 61.67 lbs
Soft Panel
Passive Component
Test Instruments
13 kg / 28.63 lbs
Power Supply
Test Equipment
13 kg / 28.63 lbs
Optical Inspection
Equipment
12.2 kg / 26.87 lbs
Video & Color
Test Equipment
13 kg / 28.63 lbs
LCD/LCM
Test Equipment
89 x 430 x 425 mm / 3.5 x 16.93 x 16.73 inch
11.2 kg / 24.67lbs
LED
Test Equipment
Weight
Note *1 : Call for availability
62024P-100-50
Semiconductor/IC
Test Equipment
Dimensions ( H x W x D)
Solar Cell
Test Equipment
ELECTRICAL SPECIFICATIONS-2
Model
62012P-600-8
62024P-40-120 *1
62024P-80-60
Output Ratings
Output Voltage
0~600V
0-40V
0~80V
Output Current
0~8A
0-120A
0~60A
Output Power
1200W
2400W
2400W
Line Regulation
Voltage
0.01%+18mV
0.01%+2mV
0.01%+8mV
Current
0.03%+20mA
0.01%+25mA
0.01%+10mA
Load Regulation
Voltage
0.01%+50mV
0.01%+3mV
0.01%+12mV
Current
0.03%+40mA
0.01%+10mA
0.01%+20mA
Voltage Measurement
Range
120V/600V
8V / 40V
16V/80V
Accuracy
0.05% + 0.05%F.S.
0.05% + 0.05%F.S.
0.05% + 0.05%F.S.
Current Measurement
Range
1.6A/8A
24A / 120A
12A/60A
Accuracy
0.1% + 0.1%F.S.
0.1% + 0.1%F.S.
0.1% + 0.1%F.S.
Output Noise (0 ~ 20MHz)
Voltage Ripple (P-P)
180 mV
90 mV
100 mV
Voltage Ripple (rms)
90 mV
10 mV
10 mV
Current Ripple (rms)
60 mA
120 mA
30 mA
110% of Vset
110% of Vset
110% of Vset
OVP Adjustment Range
to 110% of Vmax
to 110% of Vmax
to 110% of Vmax
Slew Rate Range
Voltage (with USB)
0.01V - 10V/ms
0.001V - 5V/ms
0.001V - 10V/ms
Current (with USB)
0.001A - 1A/ms
0.001A - 1A/ms
0.001A - 1A/ms
Programming Response Time (Typical)
Rise Time (Full & No Load)
60 ms
8 ms
8 ms
Fall Time
5 s(max)
240ms(max)
240 ms(max)
Efficiency
0.8
0.8
0.85
Drift (8 hours)
Voltage
0.02% of Vmax
0.02% of Vmax
0.02% of Vmax
Current
0.04% of Imax
0.04% of Imax
0.04% of Imax
Temperature Coefficient
Voltage
0.02% of Vmax/℃
0.02% of Vmax/℃
0.02% of Vmax/℃
Current
0.04% of Imax/℃
0.04% of Imax/℃
0.04% of Imax/℃
Transient Response Time
3mS
3mS
3mS
10 % step change
600 mV
150 mV
250 mV
Voltage limit @ Series Mode
800V
200V
400V
190 to 250Vac
190 to 250Vac
AC Input Voltage Ranges
95 to 250Vac
(single phase)
(single phase)
Operating Temperature
0~40℃
0~40℃
0~40℃
62000P Series
Electrical Safety
Test Instruments
ISO 16750-2 4.5.3 Starting Profile
ISO 16750-2 4.5.1 Momentary Drop
In Supply Voltage
General Purpose
Test Instruments
Transient Voltage Programming
Model 62050P-100-100
All specifications are subject to change without notice.
11-38
PXI Instruments
& Systems
• Continued on next page ➟
Model No.
Programmable DC Power Supply
62000P Series
GENERAL SPECIFICATIONS
Programming &Measurement Resolution
Voltage (Front Panel)
Current (Front Panel)
Voltage (Remote Interface))
Current (Remote Interface))
Voltage (Analog Programming Interface)
Current (Analog Programming Interface)
Programming Accuracy
Voltage Programming (Front Panel and Remote Interface)
Voltage Programming (Analog Programming Interface)
Current Programming (Front Panel and Remote Interface)
Current Programming (Analog Programming Interface)
Programming Response Time
Rise Time: For a programmed 5 to 95% step in output voltage. (Full & NoLoad)
Fall Time: For a programmed 95% to 5 step in output voltage. (The fall time will be affected by the external loading from UUT.)
Vout setting (USB send command to DC Power Supply receiver)
?Volt, ? Current (under USB command using Fetch)
?Volt, ? Current (under USB command using Measure)
Analog Programming Interface
Voltage and Current Programming inputs
Voltage and Current monitor
Isolation: Maximum working voltage of any analog programming signal with respect to chassis potential.
Auxiliary Power Supply
Output Voltage
Maximum current source capability
Remote Inhibit Function (I/O)
Use to disable the output of DC Power Supply; Active Low
DC-ON Output Signal
Indicate the output status, Active High
Fault Output Signal
Indicate if there is a fault/protection occurred, Active Low
Series & Parallel operation function with Master / Slave control
Voltage limit @ Series Mode
Number of DC Power Supplies allowed @ master / slave control mode
Auto Sequencing Programmable Function (List Mode)
Number of program
Number of sequence
Time Range
TTL signal out
TTL source capability
Auto Sequencing Programmable Function (Step Mode)
Start Voltage Range
End Voltage Range
Total Run Time Range
Slew Rate Control Function
Voltage slew rate range (The fall rate will be affected by the discharge rate of the output capacitors especially under no load condition.)
Current slew rate range of current
Minimum transition time
Remote Sense
Line loss compensation
10 mV
10 mA
0.003% of Vmax
0.002% of Imax
0.04% of Imax
0.04% of Imax
0.1% of Vmax
0.2% of Vmax
0.3% of Imax
0.3% of Imax
See Electrical Specification
See Electrical Specification
10ms
10ms
70ms
0~10Vdc or 0~5Vdc of F.S.
0~10Vdc or 0~5Vdc of F.S.
70Vdc
12Vdc
10mA
TTL
TTL
TTL
See Electrical Specification
5
10
100
5ms ~ 15000S
8 bits
7 mA
0 ~ full scale
0 ~ full scale
10ms ~ 99 hours
See Electrical Specification
See Electrical Specification
0.5 ms
5V
ORDERING INFORMATION
62006P-30-80 : Programmable DC Power Supply 30V/80A/600W
62006P-100-25 : Programmable DC Power Supply 100V/25A/600W
62006P-300-8 : Programmable DC Power Supply 300V/8A/600W
62012P-40-120 : Programmable DC Power Supply 40V/120A/1200W
62012P-80-60 : Programmable DC Power Supply 80V/60A/1200W
62012P-100-50 : Programmable DC Power Supply 100V/50A/1200W
62012P-600-8 : Programmable DC Power Supply 600V/8A/1200W
* 62024P-40-120 : Programmable DC Power Supply 40V/120A/2400W
62024P-80-60 : Programmable DC Power Supply 80V/60A/2400W
11-39
62024P-100-50 : Programmable DC Power Supply 100V/50A/2400W
* 62024P-600-8 : Programmable DC Power Supply 600V/8A/2400W
62050P-100-100 : Programmable DC Power Supply 100V/100A/5000W
A620004 : GPIB Interface for Model 62000P Series
A620006 : Rack mounting kit for Model 62000P Series (2U model)
A620009 : Softpanel for 62000P Series
A620015 : Rack mounting kit for Model 62050P-100-100
* A620023 : Ethernet Interface for Model 62000P Series
* Call for availability
All specifications are subject to change without notice.
GPIB
Ethernet
RS-232
RS-485
62000H Series
APG
There are 100 user programmable input status on the front
panel for automated test application and life cycle ON/OFF test.
In addition, the 62000H has a 16 bit digital control with bright
vacuum fluorescent display readout.
Video & Color
Test Equipment
The 62000H series DC power supply are very easy to operate
either from the front panel keypad or from the remote controller
Programming Sequences Applications
The 62000H Series supplies' LIST and STEP modes allows for
auto sequencing function. The LIST mode allows for 100 user
programmable sequences with time settings ranging from 5ms to
15000s and voltage / current slew rate control. The STEP mode
allows for setting start, end voltage and run time of 10ms to 99
hours for automated test applications. Applications include DC/
DC Converter & Inverter voltage dropout testing, engine start-up
simulation, battery automated charging, battery voltage dropout
simulation, product life cycle testing and avionics testing.
LCD/LCM
Test Equipment
Optical Inspection
Equipment
KEY FEATURES
■ Power range: 5KW / 10KW / 15KW
■ Voltage range: 0 ~ 600V
■ Current range: 0 ~ 375A
■ High power density (15KW in 3U)
■ Easy Master / Slave parallel & series operation up to 150KW
■ Precision V&I Measurements
■ High-speed programming
■ Voltage & Current Slew Rate Control
■ Digital encoder knobs, keypad and function keys
■ Current sharing operation
■ Voltage ramp function (time range: 10 ms ~ 99 hours)
■ Auto Sequencing Programming: 10 Programs / 100 Sequences
■ OVP, Current Limit, Thermal protection
■ Standard Analog Programming interface
■ Standard USB / RS232 / RS485 interface
■ Optional GPIB / Ethernet interface
■ Remote output ON / OFF (I / P)
■ Remote sense line drop compensation
■ LabView and Labwindows
■ CE Certified
The 62000H Series includes 8 different models ranging from
5KW to 15KW, with current ranges up to 375A and voltage
ranges up to 900V. The 62000H can easily parallel up to ten
units capable of 150KW with current sharing for bulk power
applications, for example, battery bank simulation of 450V/150A/
67.5KW for electric vehicle and military use.
Another unique capability of the 62000H supplies is their ability
to create complex DC transient waveforms. This capability allows
devices to be tested to DC voltage dropouts, spikes and other
voltage variations making them an ideal choice for aerospace
device testing, inverter testing and other devices which will
experience voltage interrupts. Applications include DC/DC
Converter & Inverter voltage drop test, engine start-up simulation,
battery automated charging, electronic product life cycle test, etc.
LED
Test Equipment
Programmable DC Power Supply
Model 62000H Series
via USB / RS232 / RS485 / APG (Standard) and GPIB & Ethernet
(optional). Its compact size with 3U only can be stacked on a
bench in a standard rack without any difficulties.
Semiconductor/IC
Test Equipment
Chroma's new 62000H Series of programmable DC power
supplies offer many unique advantages for telecom, automated
test system & integration, industrial, battery charge & simulation
for hybrid cars and solar panel simulation. These advantage
include high power density of 15KW in 3U, precision readback of
output current and voltage, output trigger signals as well as the
ability to create complex DC transients waveforms to test device
behavior to spikes, drops, and other voltage deviations.
Solar Cell
Test Equipment
USB
Model No.
Programmable DC Power Supply
Power Supply
Test Equipment
Passive Component
Test Instruments
ORDERING INFORMATION
* 62150H-40 : Programmable DC Power Supply 40V/375A/15KW (Input 380 Vac)
* 62150H-600 : Programmable DC Power Supply 600V/25A/15KW (Input 380 Vac)
Electrical Safety
Test Instruments
* 62100H-30 : Programmable DC Power Supply 30V/375A/11KW (Input 380 Vac)
* 62100H-40 : Programmable DC Power Supply 40V/250A/10KW (Input 380 Vac)
* 62100H-600 : Programmable DC Power Supply 600V/18A/10KW (Input 380 Vac)
* 62075H-30 : Programmable DC Power Supply 30V/250A/7.5KW (Input 380 Vac)
* 62050H-40 : Programmable DC Power Supply 40V/125A/5KW (Input 380 Vac)
General Purpose
Test Instruments
* 62050H-600 : Programmable DC Power Supply 600V/9A/5KW (Input 380 Vac)
* Call for availability
All specifications are subject to change without notice.
11-40
PXI Instruments
& Systems
• Continued on next page ➟
Model No.
Programmable DC Power Supply
62000H Series
ELECTRICAL SPECIFICATIONS
Model
62075H-30 *1
62050H-40 *1
62050H-600 *1
62100H-30 *1
62100H-40 *1
62100H-600 *1
62150H-40 *1
Output Ratings
Output Voltage *2
0~30V
0~40V
0~600V
0~30V
0~40V
0~600V
0~40V
Output Current *3
0~250A
0~125A
0~9A
0~375A
0~250A
0~18A
0~375A
Output Power
7500W
5000W
5000W
11250W
10000W
10000W
15000W
Line Regulation *4
Voltage
± 0.01% of full scale
Current
± 0.05% of full scale
Load Regulation *5
Voltage
± 0.02% of full scale
Current
± 0.1% of full scale
Voltage Measurement
Range
6V / 30V
8V / 40V
120V / 600V
6V / 30V
8V / 40V
120V / 600V
8V / 40V
Accuracy
0.05% + 0.05%F.S.
Current Measurement
Range
50A / 250A
25A / 125A
1.8A / 9A
75A / 375A
50A / 250A
3.6A / 18A
75A / 375A
Accuracy
0.1% + 0.1%F.S.
Output Noise & Ripple
P-P (20MHz)
60 mV
60 mV
350 mV
60 mV
60 mV
350 mV
60 mV
rms (Voltage)
15 mV
15 mV
40 mV
15 mV
15 mV
40 mV
15 mV
rms (Current *6 )
< ± 0.04% of full scale rms current
OVP Adjustment Range
Range
5~110% programmable from front panel, remote analog or optional digital inputs.
Accuracy
± 1% of full-scale output
Transient Response Time
Recovers within 1ms to ± 0.75% of steady-state output for a 50% to 100% or 100% to 50% load change(1A/us)
Efficiency *7
0.87(Typical)
Drift (30 minutes) *8
Voltage
0.04% of Vmax
Current
0.06% of Imax
Drift (8 hours) *9
Voltage
0.02% of Vmax
Current
0.04% of Imax
Temperature Coefficient *10
Voltage
0.04% of Vmax/℃
Current
0.06% of Imax/℃
Note*1 : Call for availability
Note*2 : Minimum output voltage is <0.15% of rate voltage at zero output setting.
Note*3 : Minimum output current is<0.2% of rate current at zero output setting when measured with rated load resistance.
Note*4 : For input voltage variation over the AC input voltage range with constant rated load.
Note*5 : For 0-100% load variation with constant nominal line voltage.
Note*6 : Current mode noise is measured from 10% to 100% of rated output voltage full current.
Note*7 : Typical efficiency at nominal input voltage and full output power.
Note*8 : Maximum drift over 30 minutes with constant line,load ,and temperature after power on.
Note*9 : Maximum drift over 8 hours with constant line,load ,and temperature after 30 minute warm-up.
Note*10 : Change in output per ℃ change in ambient temperature with constant line and load.
11-41
62150H-600 *1
0~600V
0~25A
15000W
120V / 600V
5A / 25A
350 mV
40 mV
All specifications are subject to change without notice.
62000H Series
Solar Cell
Test Equipment
10 mV
10 mA
0.002% of Vmax
0.002% of Imax
0.04% of Vmax
0.04% of Imax
Semiconductor/IC
Test Equipment
0.1% of Vmax
0.3% of Imax
0.2% of Vmax
0.3% of Imax
LED
Test Equipment
For a programmed 5% to 95% step in output voltage. : 10ms
For a programmed 5 to 95% step in output voltage. : 10ms
For a programmed 95% to 5 step in output voltage. : 60ms
For a programmed 95% to 5 step in output voltage. : 100ms
For a programmed 95% to 5 step in output voltage. : 1s
GPIB send command to DC source receiver <20ms
Under GPIB command using Measure <25ms
Optical Inspection
Equipment
10
100
5ms ~ 15000S
Manual / Auto / External
Video & Color
Test Equipment
0~10Vdc / 0~5Vdc or 0~5k ohm / 0~1 mA ohm of F.S.
0~10Vdc or 0~5Vdc / 4~20mA of F.S.
Dry contact
Level by user define. ( Time delay= 1 ms at voltage slew rate of 10V/ms.)
TTL Level High=CV mode; TTL Level Low=CC mode
TTL: Active High
TTL: Active High
Nominal supply voltage : 12Vdc / Maximum current sink capability: 10mA
Time accuracy: <100ms
TTL: Active Low
I/P = 2 , O/P = 2
Master / Slave control via CAN for 10 units up to 150KW. (Series: two units / Parallel: ten units /Series voltage: 1200Volt. PS:600V model only)
LCD/LCM
Test Equipment
Power Supply
Test Equipment
0.001V/ms ~ 10V/ms
0.001A ~ 1A/ms
0.5 ms
0 to Full scale
0 to Full scale
10 ms - 99 hours
Manual / Auto / External
Passive Component
Test Instruments
GENERAL SPECIFICATIONS
Programming &Measurement Resolution
Voltage (Front Panel )
Current (Front Panel)
Voltage (Digital Interface)
Current (Digital Interface)
Voltage (Analog Interface )
Current (Analog Interface )
Programming Accuracy
Voltage (Front Panel and Digital Interface )
Current (Front Panel and Digital Interface )
Voltage (Analog Interface)
Current (Analog Interface)
Programming Response Time
Rise Time (Full Load)
Rise Time (No Load)
Fall Time (Full Load)
Fall Time (10% Load)
Fall Time (No Load)
Vout setting
?Volt , ? Current
Analog Interface (I/O)
Voltage and Current Programming inputs (I/P)
Voltage and Current monitor output (O/P)
Remote Output ON/OFF (I/P)
DC_ON Signal (O/P)
CV or CC mode Indicator (O/P)
OTP Indicator (O/P)
System Fault indicator (O/P)
Auxiliary power supply (O/P)
Safety interlock (I/P)
Remote inhibit (I/P)
Reserved: 4 bits I/O
Series & Parallel operation
Auto Sequencing (List mode)
Number of program
Number of sequence
Dwell time Range
Trig. Source
Slew Rate Control
Voltage slew rate range *1
Current slew rate range
Minimum transition time
Auto Sequencing (Step mode)
Start voltage
End voltage
Run time
Trig. Source
Others
AC input voltage operating range
AC frequency range
Power factor
Maximum Remote Sense Line Drop Compensation
Model No.
Programmable DC Power Supply
Electrical Safety
Test Instruments
396~528 Vac 3phase 3 wire + safety ground standard
47~63 Hz
0.78(Typical)
<100V model: 5% of full scale voltage per line(10% total) ; >100 model 2% of full scale voltage per line (4% total)
132.8 x 482.6 x 63.8 mm / 5.22 x 19 x 2.51 inch (>40V model)
Dimension (H x W x D)
132.8 x 482.6 x 64.7 mm / 5.22 x 19 x 2.55 inch (<40V model)
Weight
34 kg / 75 lbs
Operating Temperature Rage
0 ~ 50℃
Storage Temperature Rage
-40~ +85℃
Note*1: The fall rate will be affected by the discharge rate of the output capacitors especially under no load condition.
General Purpose
Test Instruments
PXI Instruments
& Systems
All specifications are subject to change without notice.
11-42
Model No.
Modular DC Power Supply
USB
CAN
GPIB
APG
RS-232
62000B Series
Ethernet
Chroma's new 62000B series of Modular DC Power Supplies
offer many unique features for Burn-in and plating applications.
The features include a N+1 redundancy, high power densities,
hot-swappable maintenance, remote ON/OFF and programmable
control via the CAN bus.
Modular DC Power Supply
for Burn-in & Plating Applications
Model 62000B Series
KEY FEATURES
■ Voltage range: 1 ~ 150V
■ Current range: 0 ~ 2000A (System)
■ Power range: 1.5kW per module up to 120kW per system
■ N+1 Redundancy
■ High Power Density (464 mW / cm3 = 7.13 W/In3)
■ Hot-swappable
■ Ideal for Burn-in & Plating
■ Remote Sense
■ Remote ON / OFF
■ CAN Bus Control
■ DC OK Signal Output
The 62000B family offers 5 types of power module with
ranging from 1V to 150V, current from 10A to 90A, and offers
two mainframe type of six and three position. The six position
mainframe can envelop in up to six power modules paralleled
operation for 9KW power output. The 62000B can easily parallel
up to fourteen mainframe to 120KW with current sharing and
CAN bus control for bulk power applications.
High Power Applications with CSU
The 62000B modular power supplies are capable of providing
high power output up to 120KW/2000A with minimum
specification degradation via CSU(Control & Supervisor Unit).
Each chassis is designed to accommodate a maximum of 9KW
and include current sharing capability to ensure system stability.
In addition, for convenient control of even large power systems,
a Control & Supervisor unit is provided to set and display output
and protection circuits via a standard CAN bus communication
protocol.
The Modular DC Power Supplies of 62000B are very cost
effective with high power density and low current ripple. These
instruments have be designed for burn-in applications such as
the LCD panels, DC-DC converters, power inverters, notebook
computers, battery chargers and many other types of electronic
devices.
Control & Supervisor Unit
Modern power factor correction circuitry is incorporated in
62000B providing an input power factor above 0.98 to meet the
IEC requirements. This PFC correction circuity not only reduces
the input current but also raises the operating efficiency to over
80% Optional graphic SoftPanels and CAN bus control allow for
control and monitoring of the power system using an easy to use
graphical interface.
Hot-swap Operation
Equipped with the functionality of N+1 redundancy and hot-swap,
the 62000B Series of modular DC power supplies are most
applicable for 24 hours non-stop applications such as the SMD
plating production lines, as well as product life burn-in test for IT
products like DC converters, LCD backlight inverters and routers
For continuous operation applications the modular hot-swap
design allows engineers to replace the failure unit on-site without
shutting down the entire system.
Customized Power Solution
AVAILABLE POWER RATINGS
Current
Rating
Power
Rating
9KW
18KW
27KW
36KW
45KW
540A
300A
150A
108A
60A
1080A
600A
300A
216A
120A
1620A
900A
450A
324A
180A
2160A
1200A
600A
432A
240A
2700A
1500A
750A
540A
300A
3
4
5
Voltage Rating
15V
30V
60V
80V
150V
11-43
Paralleled unit
1
2
of mainframe
Note : Call for more information on customization of high power system ( >2000A)
All specifications are subject to change without notice.
Model No.
Modular DC Power Supply
1350W
1~15V
1~90A
1500W
1~30V
1~50A
100mV
30mV
0.9A
> 87% @ full load
100mV
30mV
0.5A
62015B-60-25
62015B-80-18
62015B-150-10
1500W
1~60V
1~25A
0.1% FS
1% FS
1% FS
1% FS
1440W
1~80V
1~18A
1500W
1~150V
1~10A
200mV
50mV
0.25A
200mV
50mV
0.18A
400mV
100mV
0.1A
LED
Test Equipment
62015B-30-50
Semiconductor/IC
Test Equipment
62015B-15-90
Solar Cell
Test Equipment
> 88% @ full load
5% of nominal output
< 5 ms
LCD/LCM
Test Equipment
187 ~ 250 Vac (3 Phase 4 Wire, Δ Connection ) or 323 ~ 437 Vac (3 Phase 5 Wire, Y Connection) / 45 ~ 65 Hz
187 to 250 Vac (single phase) / 45 ~ 65 Hz
> [email protected] full load
Automatically shuts down at 115% of set value
1~31V
1~65V
1~83V
Current limit (0 ~ 100%) / OCP Shutdown at 115% of F.S.
Automatically shuts down if internal limit is reached
1~16V
Video & Color
Test Equipment
1~155V
Dry contact (closed = enabled), vice versa
4 ~ 24V / 0.5A at mainframe (by trimmer adjust voltage)
Dry contact (closed = enabled) (Error : OVP / OCP / OTP / AC Fault)
Optical Inspection
Equipment
For a programmed 5% to 95% step in output voltage : 100ms
For a programmed 5% to 95% step in output voltage : 100ms
For a programmed 95% to 5% step in output voltage : 40ms
For a programmed 95% to 5% step in output voltage : 5s
CAN Bus send command to DC module receiver : 1s
Under CAN command using fetch : 100ms
For output ON/OFF enable and disable (under CAN command) : 5s(Single Mainframe)
Power Supply
Test Equipment
3V max. line loss compensation
Current Sharing (±5%)
0 ~ 50℃
0 ~ 90% RH. Non-condensing
CAN Bus (optional)
CE
Mainframe : 175.6 x 443.9 x 466.2 mm / 6.91 x 17.48 x 18.35 inch (62000B-6-1)
Mainframe : 175.6 x 239.9 x 466.2 mm / 6.91 x 9.44 x 18.35 inch (62000B-3-1)
Module : 138.5 x 67.5 x 377.5 mm / 5.45 x 2.66 x 14.86 inch
Mainframe : 14 Kg / 30.8 lbs (62000B-6-1)
Mainframe : 8 Kg / 17.6 lbs (62000B-3-1)
Module : 4 Kg / 8.8 lbs
Dimension (H x W x D)
Weight
Passive Component
Test Instruments
SPECIFICATIONS
Model
Electrical Specifications
Output Ratings
Output Power
Output Voltage
Output Current
Line Regulation
Load Regulation *1
Programming Accuracy
Measurement Accuracy
Output Noise (20MHz)
Voltage Noise (P-P)
Voltage Ripple (rms)
Current Ripple (rms)
Efficiency
Turn on over shoot voltage *2
Transient Response Time *3
AC Input Voltage
Six Position Mainframe
Three Position Mainframe
Input Power Factor
Protection Function
OVP
Adjustment Range
OCP
OTP
I/O Signal
Remote ON/OFF (I/P)
AUX Voltage
DC OK Signal Type (O/P)
Programming Response Time *4 (Typical)
Rise Time (Full Load)
Rise Time (No Load)
Fall Time (Full Load)
Fall Time (No Load)
Vout Setting
Measurement V & I
Delay Time
General Specifications
Remote Sensing
Parallel Operation
Operating Temperature
Humidity Range
Remote Interface
Safety & EMC
62000B Series
Electrical Safety
Test Instruments
Note*1 : For 50% step load variation with remote sense at maximum output voltage
Note*2 : based on rise time of 100ms
Note*3 : Time for the output voltage to recover within 1% of its rated for a load changed of 25%
Note*4 : Six Position Mainframe through CAN
ORDERING INFORMATION
PXI Instruments
& Systems
All specifications are subject to change without notice.
A620012 : AD-Link PCI 7841 CAN Bus Card
A620013 : 19" Rack (23U) for 62000B Series
A620014 : 19" Rack (41U) for 62000B Series
A620016 : Rack Mounting Kit for CSU
A620017 : Softpanel for 62000B Series
A620018 : NI USB-8473 high-speed USB to CAN interface
A620019 : USB Interface Control Box for mainframe & CSU
*A620020 : GPIB Interface Control Box for mainframe & CSU
*A620021 : APG Interface Control Box for mainframe
*A620022 : RS-485 Interface Control Box mainframe & CSU
General Purpose
Test Instruments
62000B-3-1 : Three Position 62000B Mainframe
62000B-6-1 : Six Position 62000B Mainframe
62015B-15-90 : DC Power Supply Module, 15V/90A/1350W
62015B-30-50 : DC Power Supply Module, 30V/50A/1500W
62015B-60-25 : DC Power Supply Module, 60V/25A/1500W
62015B-80-18 : DC Power Supply Module, 80V/18A/1440W
62015B-150-10 : DC Power Supply Module, 150V/10A/1500W
A620007 : Control & Supervisor Unit
A620008 : CAN Bus Interface for mainframe
A620010 : Rack Mounting Kit for mainframe
A620011 : Ethernet Interface for CSU
Softpanel for Model 62000B Series
* Call for availability
11-44
RS-232
GPIB
Model No.
Programmable DC Power Supply
6200 Series
APG
LR 57456-18
The Chroma 6200 series low power (60W) programmable DC
power source, deliver low output noise and ripple (Voltage <
1mVrms, Current < 1mArms), excellent line and load regulation,
and fast transient response. With wide range of voltage (7V-250V),
Current (0.25A-6A) combinations, it is used in every part of your
manufacturing process from design to production test.
Programmable DC Power Supply
Model 6200 Series
60W
For higher power requirements, the 6200 series can be easily
combined with 6203 series supplies in dual, triple, and
quad configurations. With six standard models, three remote
programming options, including Internal Analog Programming
interface(APG)-master/slave tracking, Internal RS-232 interfaceserial instrument programming using the RS-232 protocol, GPIB
Interface with 14 bits resolution and software calibration. The
instrument offers quality and reliability for even most demanding
applications in production testing, R&D design characterization,
and QA verification.
ORDERING INFORMATION
6200-7 : DC Power Supply 7V/6A/42W
6200-15 : DC Power Supply 15V/4A/60W
6200-20 : DC Power Supply 20V/3A/60W
6200-30 : DC Power Supply 30V/2A/60W
6200-60 : DC Power Supply 60V/1A/60W
6200-120 : DC Power Supply 120V/0.5A/60W
6200-250 : DC Power Supply 250V/0.25A/60W
A620001 : Analog Programming Interface for Model 6200/6203
Series
A620002 : RS-232 Interface for Model 6200/6203 Series
A620003 : GPIB Interface for Model 6200/6203 Series
KEY FEATURES
■ Low output noise and ripple, excellent line and load
regulation, and fast transient response
■ Hundreds of single, dual, triple and quad output
configurations
■ Overvoltage protection (Option)
■ Wide range of voltage/current combinations
■ Analog, RS-232, or GPIB programming
SPECIFICATIONS *1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation *2
Voltage
Current
Load Regulation *3
Voltage
Current
Meter Accuracy
Voltage (1% of Vmax+1 count)
Current (1% of Imax+1 count)
Output Noise and Ripple (20Hz-20MHz)
Voltage
Current
Stability *4
Voltage (0.02% of V max)
Current (0.03% of I max)
Temperature Coefficient *5
Voltage (0.015% of V max/℃)
Current (0.02% of I max/℃)
Front Panel Voltage Control Resolution
(0.02% of Vmax)
6200-7
6200-15
6200-20
6200-30
6200-60
6200-120
6200-250
0-7V
0-6A
42W
0-15V
0-4A
60W
0-20V
0-3A
60W
0-30V
0-2A
60W
0-60V
0-1A
60W
0-120V
0-0.5A
60W
0-250V
0-0.25A
60W
2mV
0.4mA
2mV
0.4mA
2mV
0.4mA
2mV
0.3mA
2mV
0.3mA
2mV
0.3mA
3mV
0.25mA
2mV
0.4mA
2mV
0.4mA
2mV
0.4mA
2mV
0.3mA
2mV
0.3mA
2mV
0.3mA
3mV
0.25mA
0.08V
0.07A
0.25V
0.05A
0.3V
0.04A
0.4V
0.03A
0.7V
0.02A
2.2V
0.006A
3.5V
0.003A
<1mVrms
<1mArms
1.4mV
1.8mA
3mV
1.2mA
4mV
0.9mA
6mV
0.6mA
12mV
0.3mA
24mV
0.15mA
50mV
0.075mA
1.05mV
1.2mA
2.25mV
0.8mA
3mV
0.6mA
4.5mV
0.4mA
9mV
0.2mA
18mV
0.1mA
37.5mV
0.05mA
1.4mV
3mV
4mV
6mV
12mV
24mV
50mV
*1. Specifications indicate typical performance at 25℃±5℃,
nominal line input of 115 Vac.
*2. For input voltage variation over the AC input voltage range,
with constant rated load.
*3. For 0-100% load variation, with constant nominal line voltage.
*4. Drift over 8 hours after 30-minute warmup
*5. Change in output per℃ change in ambient temperature, with
constant line and load.
11-45
Remote Analog Programming (option): 0-10Vdc for
0-100% of rated voltage or current ±0.1%, 0-10kΩ for 0-100%
of rated voltage or current ±0.1%
OVP Trip Range: 3V to full output +10%
Remote On/Off: 2 to 25Vdc high. <0.8Vdc low. User-selectable.
Tracking Accuracy: ±1% for series operation
Operating Ambient Temperature: 0-30℃ for full rated
output. Above 30℃, derate output linearly to zero at 70℃
Storage Temperature Range: -55 to +85℃
Humidity Range: Up to 80% RH, Non-condensing
Voltage Mode Transient Response Time: <100µs recovery to
0.05% band, for ±50% load change in the range of 25% to 100% of
the rated load
Front Panel Control: 10-turn voltage and 1-turn current
potentiometers (10-turn current control optional)
Front Panel Voltage Control Resolution: 0.02% of Vrms
Weight: 3.5 Kgs (7.7 lbs)
Agency Approvals: CSA
Dimension (HxWxD): 132x109x297mm / 5.2x4.29 x11.63inch
All specifications are subject to change without notice.
GPIB
6203 Series
APG
LR 57456-20
0-15V
0-20A
300W
0-30V
0-10A
300W
0-60V
0-5A
300W
2mV
3mA
2mV
2mA
2mV
1.5mA
2mV
3mA
2mV
2mA
2mV
1.5mA
0.25V
0.3A
5mV
75mV
0.4V
0.2A
5mV
75mV
0.7V
0.06A
5mV
100mV
3mV
6mA
6mV
3mA
12mV
1.5mA
2.25mV
4mA
3mV
4.5mV
2mA
6mV
9mV
1mA
12mV
Front Panel Control: 10-turn voltage and 1-turn current
potentiometers (10-turn current control optional)
Voltage Mode Transient Response Time: < 500µs recovery to
50mV band for ±50% load change in the range of 25% to 100% of the
rated load
Switching Frequency: 100kHz (nominal)
Weight: 3.5Kgs (7.7 lbs)
Agency Approvals: CE
Dimension (HxWxD): 132x109x297mm / 5.2x4.29 x11.63inch
General Purpose
Test Instruments
Remote Analog Programming (option): 0~10Vdc for
0~100% of rated voltage or current ±0.1%, 0~10kΩ for
0~100% of rated voltage or current ±0.1%
OVP Trip Range: 3V to full output +10%
AC Input(default): Single Unit: 104~127Vac at 6Arms;
Dual Units: 104~127Vac at 12Arms, 47~63Hz
Operating Ambient Temperature: 0~30℃ with default local
sensing. Above 30℃, derate output linearly to zero at 70℃
Storage Temperature Range: -55 to +85℃
Humidity Range: 0~80% RH, Non- condensing
Electrical Safety
Test Instruments
constant line and load
6203-60
Passive Component
Test Instruments
with constant rated load
*3.For 0-100% load variation, with constant nominal line voltage
*4.Drift over 8 hours after 60 minute warmup
*5.Change in output per ℃ change in ambient temperature, with
6203-30
Power Supply
Test Equipment
nominal line input of 120 Vac.
*2.For input voltage variation over the AC input voltage range,
6203-15
Optical Inspection
Equipment
*1.Specifications indicate typical performance at 25℃±5℃,
6203 Series
A620002 : RS-232 Interface for Model 6200/6203 Series
A620003 : GPIB Interface for Model 6200 / 6203 Series
Video & Color
Test Equipment
SPECIFICATIONS *1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation *2
Voltage
Current
Load Regulation *3
Voltage
Current
Meter Accuracy
Voltage (1% of Vmax+1 count)
Current (1% of Imax+1 count)
Output Noise and Ripple at rear output (0Hz-20MHz) rms
p-p
Stability *4
Voltage(0.02% of Vmax)
Current(0.03% of Imax)
Temperature Coefficient *5
Voltage (0.015% of Vmax/℃)
Current (0.02% of Imax/ ℃)
Front Panel Voltage Control Resolution (0.02% of Vmax)
6203-15 : DC Power Supply 15V/20A/300W
6203-30 : DC Power Supply 30V/10A/300W
6203-60 : DC Power Supply 60V/5A/300W
A620001 : Analog Programming Interface for Model 6200/
LCD/LCM
Test Equipment
KEY FEATURES
■ Excellent regulation and transient response
■ Single,dual, triple,and quad outputs
■ Analog, GPIB, or RS-232 programming
■ Overvoltage protection (Option)
ORDERING INFORMATION
LED
Test Equipment
Programmable DC Power Supply
Model 6203 Series
300W
The higher precision requirement, 6203 series can be easily
combined with 6200 series in dual, triple and quad configurations.
Multiple units can be combined in auto parallel, auto series and
auto tracing configurations to obtain more Voltage/Current output.
For enhanced control, you can upgrade the 6203 series from front
panel control to remote analog signal to computer programming.
Excellent regulation and transient, the voltage mode transient
response time less than 500µs recovery to 50mV band for 50%
load change in the range of 25% to 100% of the rated load,
and the front panel control 10- turn voltage and1-turn current
potentiometers, allow accurate adjustment of voltage and current
output settings, the constant-voltage, constant current output
allows operation as either a voltage source or current source.
The 6203 series is very easy to operate from the front panel
keypad, or from the remote controller via IEEE 488, RS-232 or
APG (Analog Programming Interface). The APG includes over
voltage protection (OVP), remote ON/OFF, master slave tracking,
output voltage and current can be controlled with external 0-10
voltage analog signals.
Semiconductor/IC
Test Equipment
The Chroma 6203 series programmable DC power source offers
maximum rated DC power for output Voltage (15V/30V/60V),
output current (5A/10A/20A), output power (300W), is an
exceptional product providing the highest power density in its
class to any bench or system application.
Solar Cell
Test Equipment
RS-232
Model No.
Programmable DC Power Supply
PXI Instruments
& Systems
All specifications are subject to change without notice.
11-46
RS-232
GPIB
APG
C22.2 No.
1010.1-92
Model No.
Programmable DC Power Supply
6210 Series
PFC
interface to isolate analog remote programming controls either the
unit’s output voltage or current to obtain full output power with
lower noise and higher precision.
This 6210 series of constant-voltage, constant-current power
supplies is available in power ranges 1000W (in 3 1/2 inches
of vertical rack space, half-rack cases). All models have 10-turn
voltage and current controls that vary the voltage (7.5V~600V)
and current (1.7A~130A) outputs from zero to the maximum
rated values. Crossover from constant voltage to constant current
operation occurs automatically when the load current exceeds
the control settings, another provides an adjustable current limit,
allowing user to the current limit without your having to short the
output.
Programmable DC Power Supply
Model 6210 Series
1000W
KEY FEATURES
■ Built-in power factor correction circuit provides input
power factor of over 0.98 minimum for full load.
■ Thermal shutdown.
■ Optional internal computer control (GPIB).
■ Standard overvoltage protection (OVP).
6210-7.5
6210-20
6210-33
6210-40
6210-60
6210-100
6210-150
6210-300
6210-600
0-7.5V
0-130A
975W
0-20V
0-50A
1000W
0-33V
0-33A
1089W
0-40V
0-25A
1000W
0-60V
0-18A
1080W
0-100V
0-10A
1000W
0-150V
0-7A
1050W
0-300V
0-3.5A
1050W
0-600V
0-1.7A
1020W
3mV
14mA
4mV
6mA
5mV
4.3mA
8mV
2.8mA
8mV
2.8mA
12mV
2mA
17mV
1.7mA
32mV
1.3mA
62mV
1.2mA
3mV
66mA
4mV
26mA
5mV
18mA
6mV
14mA
8mV
10mA
12mV
6mA
17mV
4.5mA
32mV
3mA
62mV
2mA
0.09V
1.4A
0.3V
0.6A
0.43V
0.43A
0.5V
0.35A
0.7V
0.19A
1.1V
0.11A
1.6V
0.08A
4V
0.05A
7V
0.03A
10mV
70mV
10mV
70mV
7.5mV
75mV
7.5mV
75mV
10mV
75mV
10mV
100mV
20mV
150mV
30mV
250mV
120mV
500mV
3.75mV
130mA
10mV
50mA
16.5mV
33mA
20mV
25mA
30mV
18mA
50mV
10mA
75mV
7mA
150mV
3.5mA
300mV
1.7mA
1.5mV
39mA
4mV
15mA
6.6mV
9.9mA
8mV
7.5mA
12mV
5.4mA
20mV
3mA
30mV
2.1mA
60mV
1.1mA
120mV
0.48mA
3V/line
5V/line
5V/line
5V/line
5V/line
5V/line
5V/line
5V/line
5V/line
0.375-8.25V
1-22V
1.65-36.3V
2-44V
3-66V
5-110V
7.5-165V
15-330V
30-660V
*1. Specifications indicate typical performance at 25℃±5℃,
nominal line input of 120 Vac.
*2. For input voltage variation over the AC input voltage range,
with constant rated load.
*3. For 0-100% load variation, with constant nominal line voltage.
*4. Maximum drift over 8 hours with constant line, load, and
temperature, after 30 minutes warm-up
*5. Change in output per ℃ change in ambient temperature, with
constant line and load
*6. Line drop is subtracted from total voltage available at supply
output
11-47
6210-7.5 : DC Power Supply 7.5V/130A/975W
6210-20 : DC Power Supply 20V/50A/1000W
6210-33 : DC Power Supply 33V/33A/1089W
6210-40 : DC Power Supply 40V/25A/1000W
6210-60 : DC Power Supply 60V/18A/1080W
6210-100 : DC Power Supply 100V/10A/1000W
6210-150 : DC Power Supply 150V/7A/1050W
6210-300 : DC Power Supply 300V/3.5A/1050W
6210-600 : DC Power Supply 600V/1.7A/960W
A621001 : Isolated Programming Interface
A621002 : GPIB Interface for Model 6210 Series
A621003 : RS-232 Interface for Model 6210 Series
A621006 : Rack Mounting Kit for Model 6210 Series
High density and precision of 6210 series also include the remote
controller via IEEE-488 interface designed as a plug-in card to
change the unit in seconds into a computer controlled system
power source. All the outputs on these models are protected
against overload and over-temperature damage. Protection circuits
prevent output voltage overshoot when supply is turned on and off.
It can be used for R&D design characterization, production testing,
and QA verification of commercial, industrial, and aerospace
electronic products.
High performance to meet critical testing need, the Chroma 6210
series programmable DC power source incorporates modern
power factor correction circuitry to increase the input power factor
to more than 0.98 to meet IEC regulations, thus reduces the input
current requirement and raises the efficiency over 80%. Isolated
SPECIFICATIONS *1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation *2
Voltage
Current
Load Regulation *3
Voltage
Current
Meter Accuracy
Voltage
Current
Output Noise & Ripple (V)
rms
p-p (0-20MHz)
Stability *4
Voltage (0.05% of Vmax)
Current (0.1% of Imax)
Temperature Coefficient *5
Voltage (0.02% of V max/℃)
Current (0.03% of I max/℃)
Maximum Remote Sense
Line Drop Compensation *6
OVP Adjustment Range
(5% to 110% of Vmax)
ORDERING INFORMATION
AC Input: 85-250Vac, 47-63Hz; Power factor corrected. 13A
max @100Vac, 11A max @120Vac, 6A [email protected] Derate
maximum output power to 900 Watts for AC input less than 95V
Power Factor: 0.98 minimum for full load
Input Harmonic Distortion: Current harmonics meet IEC1000-3-2
limits
Maximum Voltage Differential from Output to Safety
Ground: 600Vdc
Storage Temperature Range: -40 to +85℃
Humidity Range: 0 to 80% RH Non-condensing
Time Delay from power on until output stable: 4 seconds
maximum
Voltage Mode Transient Response Time: 1ms for output
voltage to recover within 0.5% of previous level after step change
in load current of up to 50% of rated output
Switching Frequency: Nominal 125KHz (250KHz output ripple)
Typical Efficiency: >80%
Remote Start/Stop and Interlock: TTL Compatible Input,
selectable logic
Remote Analog Programming (full scale input): Voltage:
0-5K, 0-10k resistances; 0-5V, 0-10V sources. Current: 0-5k, 0-10k
resistances; 0-5V, 0-10V sources
Remote Monitoring: 0 to full scale output, 1% accuracy
Voltage: 0-5V, 0-10V monitor
Current: 0-5V, 0-10V monitor
Front Panel Control: 10-turn voltage and current potentiometers
Front Panel Voltage Control Resolution: 0.02% of Vmax
Weight: Approx. 6.4 Kgs (14 lbs)
Agency Approvals: CSA, CE, UL
Dimension (HxWxD): 86.4x216x472.2mm / 3.4x8.5 x18.59inch
All specifications are subject to change without notice.
Model No.
Programmable DC Power Supply
GPIB
Solar Cell
Test Equipment
RS-232
6201F Series
APG
LR 57456-19
Programmable DC Power Supply
Model 6201F Series
1200W / Low Cost - High Power
The 6201F series uses zero voltage switching which results in
increased efficiency and lower noise. This latest development in
power conversion technology has only recently been implemented
by manufacturers of fixed output power supplies.
The 6201F series caters to the applications needs of computer
controlled component burn-in, electroplating, process control,
magnet control, and other high powered requirements.
The 6201F is a 19" rack mountable power supply which allows for
a 1.75"(1U) vertical rack space.
6201F-35
6201F-40
6201F-60
6201F-100
6201F-150
6201F-300
6201F-600
0-6V
0-200A
1200W
0-7.5V
0-140A
1050W
0-12V
0-100A
1200W
0-20V
0-60A
1200W
0-35V
0-35A
1225W
0-40V
0-30A
1200W
0-60V
0-20A
1200W
0-100V
0-12A
1200W
0-150V
0-8A
1200W
0-300V
0-4A
1200W
0-600V
0-2A
1200W
2.5mV
20mA
2.75mV
16mA
3.2mV
12mA
4mV
8mA
6mV
5mA
6mV
5mA
8mV
4mA
12mV
3.2mA
17mV
2.8mA
32mV
2.4mA
62mV
2.2mA
3mV
20mA
6.5mV
33mA
7.4mV
25mA
9mV
17mA
13mV
11mA
13mV
11mA
17mV
9mA
27mV
7.4mA
35mV
6.6mA
65mV
5.8mA
125mV
5.4mA
0.07V
2.5A
0.09V
1.5A
0.13V
1.1A
0.3V
0.7A
0.4V
0.45A
0.5V
0.4A
0.7V
0.3A
1.1V
0.13A
1.6V
0.09A
4V
0.05A
7V
0.03A
5mV
50mV
10mV
75mV
10mV
75mV
10mV
75mV
10mV
150mV
10mV
150mV
10mV
150mV
10mV
150mV
20mV
150mV
70mV
200mV
80mV
400mV
3mV
200mA
3.75mV
70mA
6mV
50mA
10mV
30mA
17.5mV
17.5mA
20mV
15mA
30mV
10mA
50mV
6mA
75mV
4mA
150mV
2mA
300mV
1mA
1.2mV
60mA
1.5mV
42mA
2.4mV
30mA
4mV
18mA
7mV
10.5mA
8mV
9mA
12mV
6mA
20mV
3.6mA
30mV
2.4mA
60mV
1.2mA
120mV
0.6mA
0.3-6.6V
0.375-8.25V
0.6-13.2V
1-22V
1.75-38.5V
2-44V
3-66V
5-110V
7.5-165V
15-330V
30-660V
*1. These Specifications indicate typical performance at 25℃±5℃, AC Input Voltage Range: 85-130Vac or 190-264Vac,1ø (17A
with constant rated load.
*3. For 0-100% load variation, with constant nominal line voltage.
*4. Maximum drift over 8 hours with constant line, load, and
temperature, after 30 minute warm-up.
*5. Change in output per ℃ change in ambient temperature, with
temperature 30-50℃
11-48
PXI Instruments
& Systems
All specifications are subject to change without notice.
Remote Start/Stop and Interlock: TTL Compatible Input,
selectable logic
Agency Approvals: CE, CSA, UL and FCC, Part 15.
Programming
Remote analog programming (Full Scale Input) - voltage and current
programming: 0-5k, 0-10k
resistance: 0-5V (factory default), 0-10V voltage sources
Optional isolated program and readback (V&I)-0-5V. Optional digital
control, RS232C, GPIB interfaces
Environmental Specifications
Operating Temperature Range: 0℃ - 50℃ From 50℃ - 70℃,
derate output current 2% per℃
Storage Temperature Range: -20 to +70℃
Humidity Range: 30-90% RH Non-condensing
Cooling: Fan cooled. Air exhaust to rear.
Overtemperature Shutdown: automatic restart or latch off
Weight: 8.2 Kgs (18lbs)
Dimension (HxWxD): 43.2x429.4x508.1mm / 1.7x16.91x20inch
General Purpose
Test Instruments
constant line and load.
*6. Derate output current on 6V model by 1.5A per ℃ for operating
max @120Vac; 8.8A max @230Vac typical)
Frequency: 47-63Hz
Maximum Voltage Differential from Output to Safety
Ground: 600Vdc
Time Delay from Power on Until Output Stable: 7 seconds
maximum
Voltage Mode Transient Response Time: <3ms for the
output voltage to recover within 0.5% of its previous level after a
step change in load current of 10%-90% of rated output.
Switching Frequency: Nominal 78KHz (156KHz output ripple)
Typical Efficiency: 85%
Maximum Remote Sense Line Drop Compensation: 5V/
line (line drop is subtracted from total voltage available at supply
output)
Remote Monitoring:
Output voltage and current: 0-5V, 0-10V 0 to full scale output, 1%
accuracy
Electrical Safety
Test Instruments
nominal line input of 120 Vac.
*2. For input voltage variation over the AC input voltage range,
Passive Component
Test Instruments
6201F-20
Power Supply
Test Equipment
6201F-12
Optical Inspection
Equipment
6201F-7.5
Video & Color
Test Equipment
6201F-6
LCD/LCM
Test Equipment
SPECIFICATIONS *1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation *2
Voltage
Current
Load Regulation *3
Voltage
Current
Meter Accuracy
Voltage (1% of Vmax+1 count)
Current (1% of Imax+1 count)
Output Noise & Ripple (V)
rms
p-p (0-20MHz)
Stability *4
Voltage (0.05% of Vmax)
Current (0.05% of Imax)
Temperature Coefficient *5
Voltage (0.02% of V max/℃)
Current (0.03% of I max/℃)
OVP Adjustment Range
(5% to 110% of Vmax)
6201F-6 : DC Power Supply 6V/200A/1200W
6201F-7.5 : DC Power Supply 7.5V/140A/1050W
6201F-12 : DC Power Supply 12V/100A/1200W
6201F-20 : DC Power Supply 20V/60A/1200W
6201F-35 : DC Power Supply 35V/35A/1225W
6201F-40 : DC Power Supply 40V/30A/1200W
6201F-60 : DC Power Supply 60V/20A/1200W
6201F-100 : DC Power Supply 100V/12A/1200W
6201F-150 : DC Power Supply 150V/8A/1200W
6201F-300 : DC Power Supply 300V/4A/1200W
6201F-600 : DC Power Supply 600V/2A/1200W
A620100 : Isolated Programming Interface for
Model 6201F/6202F Series
A620101 : GPIB Interface for Model 6201F/6202F Series
A620102 : RS-232 Interface for Model 6201F/6202F Series
LED
Test Equipment
KEY FEATURES
■ Soft start operation limiting in-rush current on power up
■ Lower losses in power and higher efficiency
■ Quiet operation
■ Multiple fans to maintain cooling and speed controlled
for long life
■ Analog programming as a standard feature
■ Multiple level shut down for safe operation
ORDERING INFORMATION
Semiconductor/IC
Test Equipment
The 6201F series is our newest line of power supplies. It
incorporates our most advanced technology and design
philosophy.
RS-232
GPIB
Model No.
Programmable DC Power Supply
6202F Series
APG
LR 57456-19
The 6202F series is our newest line of power supplies. It
incorporates our most advanced technology and design
philosophy.
Programmable DC Power Supply
Model 6202F Series
2800W / Low Cost - High Power
KEY FEATURES
■ Soft start operation limiting in-rush current on power up
■ Lower losses in power and higher efficiency
■ Quiet operation
■ Multiple fans to maintain cooling and speed controlled
for long life
■ Analog programming as a standard feature
■ Multiple level shut down for safe operation
SPECIFICATIONS *1
Model
Output Ratings
Output Voltage
Output Current
Output Power
Line Regulation *2
Voltage
Current
Load Regulation *3
Voltage
Current
Meter Accuracy
Voltage (1% of Vmax+1 count)
Current (1% of Imax+1 count)
Output Noise & Ripple (V)
rms
p-p (0-20MHz)
Stability *4
Voltage
Current
Temperature Coefficient *5
Voltage (0.02% of V max/℃)
Current (0.03% of I max/℃)
OVP Adjustment Range
(5% to 110% of Vmax)
The 6202F series caters to the applications needs of computer
controlled component burn-in, electroplating, process control,
magnet control, and other high powered requirements.
The 6202F is a 19" rack mountable power supply which is
available in a 3.5" (2U) size.
6202F-7.5 : DC Power Supply 7.5V/300A/2250W
6202F-12 : DC Power Supply 12V/220A/2640W
6202F-20 : DC Power Supply 20V/130A/2600W
6202F-33 : DC Power Supply 33V/85A/2805W
6202F-40 : DC Power Supply 40V/70A/2800W
6202F-60 : DC Power Supply 60V/46A/2760W
6202F-100 : DC Power Supply 100V/28A/2800W
6202F-150 : DC Power Supply 150V/18A/2700W
6202F-300 : DC Power Supply 300V/9A/2700W
6202F-600 : DC Power Supply 600V/4A/2400W
A620100 : Isolated Programming Interface for
Model 6201F/6202F Series
A620101 : GPIB Interface for Model 6201F/6202F Series
A620102 : RS-232 Interface for Model 6201F/6202F Series
Special Modification : M19 (6202F-600 modify for 420V/7A)
6202F-7.5
6202F-12
6202F-20
6202F-33
6202F-40
6202F-60
6202F-100
6202F-150
6202F-300
6202F-600
0-7.5V
0-300A
2250W
0-12V
0-220A
2640W
0-20V
0-130A
2600W
0-33V
0-85A
2805W
0-40V
0-70A
2800W
0-60V
0-46A
2760W
0-100V
0-28A
2800W
0-150V
0-18A
2700W
0-300V
0-9A
2700W
0-600V
0-4A
2400W
2.75mV
32mA
3.2mV
24mA
4mV
15mA
6mV
9mA
6mV
9mA
8mV
6.6mA
12mV
4.8mA
17mV
3.8mA
32mV
2.9mA
62mV
2.4mA
6.5mV
65mA
7.4mV
49mA
9mV
31mA
13mV
19mA
13mV
19mA
17mV
14.2mA
27mV
10.6mA
35mV
8.6mA
65mV
6.8mA
125mV
5.8mA
0.09V
4A
0.13V
2.3A
0.3V
1.4A
0.43V
0.95A
0.5V
0.8A
0.7V
0.56A
1.1V
0.38A
1.6V
0.19A
4V
0.1A
7V
0.05A
10mV
100mV
10mV
100mV
10mV
100mV
15mV
150mV
15mV
150mV
15mV
150mV
25mV
175mV
25mV
200mV
40mV
400mV
100mV
500mV
3.75mV
150mA
6mV
110mA
10mV
65mA
16.5mV
42.5mA
20mV
35mA
30mV
23mA
50mV
14mA
75mV
9mA
150mV
4.5mA
300mV
2mA
1.5mV
90mA
2.4mV
66mA
4mV
39mA
6.6mV
25.5mA
8mV
21mA
12mV
13.8mA
20mV
8.4mA
30mV
5.4mA
60mV
2.7mA
120mV
1.2mA
0.375-8.25V
0.6-13.2V
1-22V
1.65-36.6V
2-44V
3-66V
5-110V
7.5-165V
15-330V
30-660V
*1. These Specifications indicate typical performance at 25℃±5℃,
nominal line input of 208 Vac.
*2. For input voltage variation over the AC input voltage range,
with constant rated load.
*3. For 0-100% load variation, with constant nominal line voltage.
*4. Maximum drift over 8 hours with constant line, load, and
temperature, after 30 minute warm-up.
*5. Change in output per℃ change in ambient temperature, with
constant line and load.
11-49
The 6202F series uses zero voltage switching which results in
increased efficiency and lower noise. This latest development in
power conversion technology has only recently been implemented
by manufacturers of fixed output power supplies.
ORDERING INFORMATION
AC Input Voltage Range: 190-264Vac,1ø (22.6A @208Vac;
20.5A max @230Vac typical)
Frequency: 47-63Hz
Maximum Voltage Differential from Output to Safety
Ground: 600Vdc
Time Delay from Power on Until Output Stable: 7 seconds
maximum
Voltage Mode Transient Response Time: <3ms for the
output voltage to recover within 0.5% of its previous level after a
step change in load current of 10% to 90% of rated output
Switching Frequency: Nominal 31KHz (62KHz output ripple)
Typical Efficiency: 85%
Maximum Remote Sense Line Drop Compensation: 5V/
line (line drop is subtracted from total voltage available at supply
output)
Remote Monitoring:
Output voltage and current: 0-5V, 0-10V
0 to full scale output, 1% accuracy
Remote Start/Stop and Interlock: TTL Compatible Input,
selectable logic
Agency Approvals: CSA, CE, UL and FCC, Part 15.
Programming
Remote analog programming (Full Scale Input) - voltage and current
programming: 0-5k, 0-10k
resistance: 0-5V (factory default), 0-10V voltage sources.
Optional isolated program and readback (V&I)-0-5V. Optional digital
control, RS232C, GPIB interfaces.
Environmental Specifications
Operating Temperature Range: 0℃ - 50℃. From 50℃ - 70℃,
derate output current 2% per℃
Storage Temperature Range: -20 to +70℃
Humidity Range: 30-90% RH Non-condensing
Cooling: Fan cooled. Air exhaust to rear.
Overtemperature Shutdown: automatic restart or latch off.
Weight: 15 Kgs (33lbs)
Dimension (HxWxD): 88.9x429.4x533.5 mm / 3.5x16.91x21 inch
All specifications are subject to change without notice.
Model No.
Programmable DC Power Supply
Specifications *1 for the 6200 Series
Model
6200-7
6200-15
Program Resolution (16-bit)
Voltage (mV)
0.12mV
0.25mV
Current (mA)
0.1mA
0.07mA
OVP (mV)
0.12mV
0.25mV
Program Accuracy
Voltage (mV)
10(±0.1%)
20(±0.1%)
Current (mA) 110(±0.15%) 70(±0.15%)
OVP (mV)
70mV
150mV
Readback Resolution (16-bit)
Voltage (mV)
0.12mV
0.25mV
Current (mA)
0.1mA
0.07mA
Readback Accuracy
Voltage (mV)
10(±0.15%) 10(±0.1%)
Current (mA) 110(±0.15%) 70(±0.15%)
6200-30
6200-60
6200-120
6200-250
0.34mV
0.05mA
0.34mV
0.5mV
0.03mA
0.5mV
1.01mV
0.02mA
1.01mV
2.01mV
0.01mA
2.01mV
4.2mV
0.01mA
4.2mV
20(±0.15%)
50(±0.15%)
200mV
30(±0.15%) 200(±0.15%) 400(±0.15%) 800(±0.15%)
40(±0.15%) 26(±0.2%)
13(±0.2%)
7(±0.2%)
300mV
200mV
1200mV
2400mV
0.34mV
0.05mA
0.5mV
0.03mA
1.01mV
0.02mA
10(±0.1%)
50(±0.15%)
15(±0.1%)
40(±0.15%)
35(±0.15%)
26(±0.2%)
Specifications *1 for the 6210 Series
Model
6210-7.5
Program Resolution (16-bit)
Voltage (mV)
0.13mV
Current (mA)
2.18mA
OVP (mV)
0.13mV
Program Accuracy
Voltage (mV)
10(±0.12%)
Current (mA)
900(±0.1%)
OVP (mV)
80mV
Readback Resolution (16-bit)
Voltage (mV)
0.13mV
Current (mA)
2.18mA
Readback Accuracy
Voltage (mV)
30(±0.12%)
Current (mA)
900(±0.1%)
Specifications *1 for the 6202F Series
Model
6202F-7.5
Program Resolution (16-bit)
Voltage (mV)
0.13mV
Current (mA)
5.04mA
OVP (mV)
0.13mV
Program Accuracy
Voltage (mV)
10(±0.12%)
Current (mA)
900(±0.15%)
OVP (mV)
80mV
Readback Resolution (16-bit)
Voltage (mV)
0.13mV
Current (mA)
5.04mA
Readback Accuracy
Voltage (mV)
30(±0.12%)
Current (mA)
900(±0.1%)
6200-20
2.01mV
0.01mA
4.2mV
0.01mA
70(±0.15%) 140(±0.15%)
13(±0.2%)
7(±0.2%)
Specifications *1 for the 6203 Series
Model
6203-15
6203-30
Program Resolution (16-bit)
Voltage (mV)
0.25mV
0.5mV
Current (mA)
0.34mA
0.17mA
OVP (mV)
0.25mV
0.5mV
Program Accuracy
Voltage (mV)
60(±0.1%)
70(±0.1%)
Current (mA)
75(±0.12%)
50(±0.12%)
OVP (mV)
1500mV
3000mV
Readback Resolution (16-bit)
Voltage (mV)
0.25mV
0.5mV
Current (mA)
0.34mA
0.17mA
Readback Accuracy
Voltage (mV)
45(±0.3%)
90(±0.3%)
Current (mA)
75(±0.12%)
40(±0.12%)
6203-60
1.01mV
0.08mA
1.01mV
90(±0.12%)
25(±0.1%)
6000mV
1.01mV
0.08mA
175(±0.3%)
25(±0.1%)
6210-20
6210-33
6210-40
6210-60
6210-100
6210-150
6210-300
6210-600
0.34mV
0.84mA
0.34mV
0.55mV
0.55mA
0.55mV
0.67mV
0.42mA
0.67mV
1.01mV
0.3mA
1.01mV
1.68mV
0.17mA
1.68mV
2.52mV
0.12mA
2.52mV
5.04mV
0.06mA
5.04mV
10.1mV
0.03mA
10.1mV
75(±0.12%)
750(±0.1%)
200mV
75(±0.12%)
500(±0.1%)
330mV
75(±0.3%)
350(±0.15%)
400mV
150(±0.25%)
250(±0.1%)
600mV
150(±0.35%)
140(±0.15%)
800mV
225(±0.35%)
120(±0.1%)
1500mV
225(±0.35%)
80(±0.1%)
3000mV
300(±0.35%)
80(±0.1%)
6000mV
0.34mV
0.84mA
0.55mV
0.55mA
0.67mV
0.42mA
1.01mV
0.3mA
1.68mV
0.17mA
2.52mV
0.12mA
5.04mV
0.06mA
10.1mV
0.03mA
75(±0.12%)
750(±0.1%)
75(±0.12%)
500(±0.1%)
75(±0.3%)
350(±0.15%)
150(±0.25%)
250(±0.1%)
150(±0.35%)
140(±0.15%)
225(±0.35%)
120(±0.1%)
225(±0.35%)
80(±0.1%)
300(±0.35%)
80(±0.1%)
6202F-12
6202F-20
6202F-33
6202F-40
6202F-60
6202F-100
6202F-150
6202F-300
6202F-600
0.2mV
3.69mA
0.2mV
0.34mV
2.18mA
0.34mV
0.55mV
1.42mA
0.55mV
0.67mV
1.17mA
0.67mV
1.01mV
0.77mA
1.01mV
1.68mV
0.47mA
1.68mV
2.52mV
0.3mA
2.52mV
5.4mV
0.15mA
5.04mV
10.1mV
0.07mA
10.1mV
75(±0.12%)
750(±0.15%)
200mV
75(±0.12%)
500(±0.15%)
330mV
75(±0.3%)
425(±0.1%)
330mV
75(±0.3%)
350(±0.15%)
400mV
150(±0.3%)
250(±0.1%)
600mV
150(±0.35%)
140(±0.15%)
1000mV
225(±0.35%)
120(±0.1%)
1500mV
225(±0.35%)
80(±0.1%)
3000mV
300(±0.35%)
80(±0.1%)
6000mV
0.2mV
3.69mA
0.34mV
2.18mA
0.55mV
0.55mA
0.67mV
1.17mA
1.01mV
0.77mA
1.68mV
0.47mA
2.52mV
0.3mA
5.04mV
0.15mA
10.1mV
0.07mA
75(±0.12%)
750(±0.1%)
75(±0.2%)
500(±0.1%)
75(±0.3%)
425(±0.1%)
75(±0.3%)
350(±0.1%)
150(±0.35%)
250(±0.1%)
150(±0.35%)
140(±0.1%)
225(±0.35%)
120(±0.1%)
225(±0.35%)
80(±0.1%)
300(±0.35%)
80(±0.1%)
6201F-40
6201F-60
6201F-100
6201F-150
6201F-300
6201F-600
0.67mV
0.5mA
0.67mV
1.01mV
0.34mA
1.01mV
1.68mV
0.2mA
1.68mV
2.52mV
0.13mA
2.52mV
5.04mV
0.07mA
5.04mV
10.1mV
0.03mA
10.1mV
75(±0.3%)
150(±0.15%)
400
150(±0.25%)
120(±0.1%)
600
150(±0.35%)
80(±0.1%)
1000
225(±0.35%)
80(±0.1%)
1500
225(±0.35%)
80(±0.1%)
3000
300(±0.35%)
75(±0.1%)
6000
0.67mV
0.5mA
1.01mV
0.34mA
1.68mV
0.2mA
2.52mV
0.13mA
5.04mV
0.07mA
10.1mV
0.03mA
75(±0.12%)
150(±0.1%)
150(±0.25%)
120(±0.1%)
150(±0.35%)
80(±0.1%)
225(±0.1%)
80(±0.1%)
225(±0.1%)
80(±0.1%)
300(±0.1%)
75(±0.1%)
Specifications *1 for the 6201F Series
Model
6201F-6
6201F-7.5
6201F-12
6201F-20
6201F-35
Program Resolution (16-bit)
Voltage (mV)
0.1mV
0.13mV
0.2mV
0.34mV
0.59mV
Current (mA)
3.36mA
2.35mA
1.68mA
1.01mA
0.59mA
OVP (mV)
0.1mV
0.13mV
0.2mV
0.34mV
0.59mV
Program Accuracy
Voltage (mV)
10(±0.12%) 10(±0.12%) 75(±0.12%) 75(±0.12%)
75(±0.3%)
Current (mA)
500(±0.12%) 500(±0.1%) 460(±0.1%) 250(±0.1%) 200(±0.1%)
OVP (mV)
130
80
200
330
350
Readback Resolution (16-bit)
Voltage (mV)
0.1mV
0.13mV
0.2mV
0.34mV
0.59mV
Current (mA)
3.36mA
2.35mA
1.68mA
1.01mA
0.59mA
Readback Accuracy
Voltage (mV)
30(±0.12%) 30(±0.12%) 75(±0.12%) 75(±0.12%) 75(±0.12%)
Current (mA)
500(±0.1%) 500(±0.1%) 460(±0.1%) 250(±0.1%) 200(±0.1%)
Note*1 : Specifications are warranted at a temperature range of 25℃ ± 5℃ unless otherwise specified.
All specifications are subject to change without notice.
11-50
LED
Test Equipment
LCD/LCM
LCD Module
Video & Color
Video &Optical
Color Inspection
Test
Power
Power
Supply
Supply Passive
Passive
Component
Component Electrical
Electrical
Safety
Safety General
General
Purpose
Purpose
& Other PXI Instruments
Solar
Solar Cell
Cell
Semiconductor/IC
Semiconductor LED
Test Equipment
Test Equipment Equipment
Equipment Test Test
Equipment
Equipment TestTest
Instruments
Instruments TestTest
Instruments
Instruments Test
Test Instruments
Instruments
& Systems
Test
Test Equipment
Equipment Test
TestEquipment
EquipmentTest Equipment Test Equipment
Additional Specifications for Remote DC Interface (RS232/GPIB) of DC Power Supply
Model No.
Switching Power Supply ATS
6000
GPIB
The hardware configuration is modular, hence flexible to expand.
Its maximum capacity includes up to twelve Switcher Analyzers
(600 Amperes output), one Extended Measurement Unit, one
Power Analyzer and a broad selection of AC and DC sources. The
system operation is controlled by an IBM PC or compatible via
standard IEEE-488 interface.
The PC-controlled Chroma 6000 ATE software - PowerPro is a
Windows-based integrated software system for PC-based ATE
control, test development and data manipulation. It adopts open
architecture concept and modern database techniques to provide
flexible, speed of programming and ease of use test solutions for
AC/DC type power supplies and DC/DC converters.
Switching Power Supply ATS
Model 6000
The Chroma 6000 ATE System contains five major building
blocks:
Switcher Analyzer offers a programmable dynamic load and
precision measurements for testing the UUT output performance.
Extended Measurement Unit provides for control and
measurement of other special function circuits.
Power Sources including AC and DC sources is to apply UUT
power during test execution.
DC Power Sources is implement Over Voltage/Under Voltage
tests.
Power Analyzer offers the combination of all the standard
instruments normally used for the input power measurement.
By its unique modular design, the software environment allows a
complete product life-cycle test strategy developed from design,
through manufacturing, maintenance and repair in the most
efficient test environment for power supplies the industry has ever
seen.
The features of the PowerPro software are as follows:
- Modular, multi-level design
- Friendly Windows 98/NT/2000 or higher graphical user
interface
- Easy-to-edit flexible test procedure
- High speed test execution via software compilation
- Report and statistic data management
- Network support, high performance data acquisition
and statistics capability.
The major function groups of the PowerPro software are
as follows:
The function group of system management
It lets the user set up the GPIB interface addresses for individual
hardware modules, and lets the system manager edit the default
parameters according to the common testing demands. It provides
the function to manage the output format files of reports, the
parameter files of SPC Log, the test programs, and defines the Log
data directories ...etc.
The function group of editor
This function group is designed to let the user edit test programs,
output format of reports, record the parameters needed by the
reports, select SPC Log parameters and edit testing commands in
test items.
The function group of execution
It lets the user execute the test program for GO/NOGO inspection,
print test results, and do the statistical analysis.
The software includes 25 basic programmable test routines for
testing power supplies under any conditions: transient, dynamic,
or static.
System Operation
In the Chroma 6000 architecture, the Switcher Analyzer and the
Extended Measurement Unit are each a dedicated power supply
function tester with built-in CPU, memory and test firmware.
The ATE System uses PARALLEL TEST methods:
- The PC “DOWN LOADS” and stores its test program into
memory residing in each tester.
-The PC then, SYNCHRONIZES the start of each test execution on
all the testers.
-All the testers SIMULATE the test conditions and MEASURE the
UUT performance characteristics SIMULTANEOUSLY at all the
input and output terminals of a UUT.
-The PC then, collects the measurement readings from all the
testers for TEST RESULTS MANAGEMENT.
Synchronization And Measurement Accuracy
One good example of the Chroma 6000 test process is in testing
the performance of a multiple output SMPS during its power on
stage. Critical characteristics such as Inrush Current, Turn-on
Time, Overshoot Voltage, etc. must be measured. In the Chroma
6000 TURN ON & SEQUENCE test routine:
-The Switcher Analyzers are synchronized as to WHEN to begin
sinking the loads and also at what SLEW RATES the loads are to
be applied at all UUT output terminals.
The EXTENDED MEASUREMENT UNIT controls WHEN to initiates
line input and WHAT input source is applied to the UUT.
-The Switcher Analyzers measure the turn on time and check
voltage overshoot at all UUT outputs simultaneously in one pass
and, at the same time, the Extended Measurement Unit measures
the inrush currents.
-All measurement readings are collected by the PC where the
power up sequence and timing relations among all outputs are
calculated and the test report displayed.
High Test Throughput And Efficiency
Another good example is in testing the performance of a multiple
output power supply under various line and load conditions.
Voltages, noise, and voltage deviations need to be measured to
see if the UUT outputs stay in regulation under all line and load
conditions.
Using the TOTAL REGULATION TEST. The user can specify the
minimum and maximum setting of the line input and the loading at
each output, the Chroma 6000 automatically analyzes all line/load
combinations and identifies the worst case voltage, noise, voltage
deviation, and line/load conditions.
Since all of the test simulations and measurements are processed
simultaneously by the Switcher Analyzers, the test execution
incurs minimum I/O overhead, hence the maximum possible test
throughput and efficiency.
Unlike the conventional power supply ATE systems which are
more often an accumulation of laboratory equipment married for a
customized application, CHROMA 6000 is a dedicated ATE system
designed to test a power supply effectively and efficiently.
11-51
All specifications are subject to change without notice.
Model No.
Switching Power Supply ATS
ORDERING INFORMATION
LED
Test Equipment
LCD/LCM
Test Equipment
Accuracy
0.3%+0.25%F.S.
0.3%+0.25%F.S.
6000 : Switching Power Supply Auto Test System
620 : Switcher Analyzer 20A/100V/200W
650 : Switcher Analyzer 50A/100V/300W
602 : Extended Measurement Unit
A600001 : ISA Bus GPIB Card (National Instrument)
A600002 : 19" Rack for Model 6000
A600009 : GPIB Cable (200cm)
A600010 : GPIB Cable (60cm)
A600012/A800027 : Test Fixture for Model 6000
A600013 : Adapter for A600011/A600012 Test Fixture (PC Standard)
A600014 : Adapter for A600011/A600012 Test Fixture (Terminal Block)
A600015 : PowerPro ATS Software
A800005 : PCI Bus GPIB Card (National Instrument)
DC Source : Refer to Model 6210, 62000P Series
AC Source : Refer to Model 6500 Series
Power Analyzer : Refer to Model 6630, 6632, 6633
Semiconductor/IC
Test Equipment
Video & Color
Test Equipment
Accuracy
0.6%+0.3%F.S.
0.9%+0.3%F.S.
Optical Inspection
Equipment
0.5%+0.3%F.S.
0.5%+0.25%F.S.
1.5%+0.1%F.S.
0.07%+0.1%F.S.
0.5%+0.5A
Power Supply
Test Equipment
SPECIFICATIONS
Accurate and highly reliable hardware devices:
System Controller
Pentium 233 or faster
32MB of memory or higher
More than 200MB Hard Disk capacity is recommended
CD-ROM Drive
Parallel Printer Port/Mouse
VGA color monitor
Interface Board
National Instrument GPIB card
System Software
Operational Environment
Windows 98/NT/2000 or higher
Switcher Analyzer
Active Load
Model Power Volt.
Current
Resolution
620
200W
100V
1A/20A
1mA/5mA
650
300W
100V
1A/50A
1mA/12.5mA
Detailed information please refer to Model 650, 620
Extended Measurement Unit
Input Port No.: 4
On/off Phase Angle Control: 0-360 degree
Measure Port: 10
General Purpose Relay: 6 (DPST), 5A, 240Vac/ 28Vdc
Digital Outputs: 16 TTL gates
Measurement
Range
Resolution
RMS Voltage
0-350V (4 ranges)
8.5-21.6mV
RMS Current
0-80A (6 ranges)
1mA-5mA
Peak Current
0-80A (6 ranges)
1mA-5mA
(repetitive)
Inrush Current
0-125A
7.6mA
True Power
0-40kW (24 ranges)
7.6mW-2.44W
DC Voltage
0-500V (3 ranges)
0.3/3/30mV
Short Circuit
0-150A
12.2mA
Peak Current
Timing
0µS-16Sec
1µS
AC Input Source
Detailed information please refer to Model 6500 series.
DC Input Source or OVP/UVP Source
Solar Cell
Test Equipment
0.01%+15mS
Detailed information please refer to Model 6210, 62000P series.
Power Analyzer
Detailed information please refer to Model 6630, 6632, 6633
Passive Component
Test Instruments
Test Items:
1. DC Output Voltage
2. Peak To Peak Noise
3. RMS Noise
4. Dynamic Response (Max.125KHz rate)
5. Line Regulation
6. Load Regulation
7. Cross Regulation
8. Combine Line/Load Regulation
9. Total Regulation
10. Turn on Time
11. Rise Time
12. Fall Time
13. Hold-up Time
14. Stable Time (Undershoot Voltage)
15. Overshoot Voltage
16. Power Good Signal
17. Power Fail Signal
18. Power Up Sequence
19. Power Down Sequence
20. Extra Timing Test
21. Overload Trip Point
22. Overload Trip Time
23. Recovery Time (after Overload)
24. Short Circuit PEAK Current
25. Short Circuit RMS Current
26. Over Voltage Protection Test /
Under Voltage Protection Test
27. Over Power Protection Test
28. Extended Voltage Test
29. HOLD-ON Adjust
30. Input Inrush Current
31. Input RMS Current
32. Input PEAK Current
33. Input TRUE Power
34. Input Power Factor
35. Efficiency
36. Input Voltage Ramp Up
37. AC Frequency Ramp Up
38. AC Cycle Drop Out
39. AC Noise Feed Through
40. External Wave Test
41. External Dynamic Test
6000
Electrical Safety
Test Instruments
General Purpose
Test Instruments
PXI Instruments
& Systems
All specifications are subject to change without notice.
11-52
Model No.
Switching Power Supply ATS
8000
GPIB
verification and mass production tests. So these save users a great
deal of time for paper work.
Working under Windows 98/NT/2000 or higher operation system,
Chroma 8000 Power Supply Auto Test System is able to get all the
resources provided by Windows; thus, it can easily export the test
results to network or to your web-page for remote manufacturing
monitoring.
Switching Power Supply ATS
Model 8000
KEY FEATURES
■ Open architecture software platform
- Support instrument with GPIB / RS-232 or
RS-485 / I2C /CAN Bus interfaces
- User editable test item
- User editable test program
- User editable report format
- Statistical report
- On-line control function
- User authority control
- Release control
- Activity log
- Master / Slave control mode
- Multi-UUT test capability for single-output PSU
- Support bar code reader
- Support Shop-floor control
- Remote monitoring via internet
■ Test command optimizer helps to improve test speed
■ Capable of coding for any power supply testing applications
■ Comprehensive hardware modules provide high accuracy
and repetitive measurements
■ High test throughput by system default test items
■ Cost effective
■ Other hardware expandable upon request
■ Windows 98/NT/2000 or higher based software
This auto test system uses the unique test command optimization
technology to prevent the repeating control commands from
sending to the system hardware devices. This improves the system
test speed dramatically and makes Chroma 8000, which uses open
software architecture, highly efficient as a close or optimized auto
test system.
To meet the power supply test requirements, Chroma Power
Supply Auto Test System model 8000 has built in 56 ready-made
test items. Users may create new test items based on new test
requirements using the test item editing function, which gives
users the capability to expand the test items unlimitedly.
With the powerful report, statistic and management functions,
Chroma Power Supply Auto Test System model 8000 is able to
provide complete tools to generate various test documents and
perform system administration. Because the test and statistical
reports are equally important nowadays for R/D evaluation, QA
11-53
Comprehensive Test Items:
OUTPUT PERFORMANCES
1. DC output voltage
2. DC output current
3. Peak-Peak noise
4. RMS noise
5. Current ripple*
6. Efficiency
7. In-test adjustment
8. Power good signal
9. Power fail signal
10. P/ S ON signal
11. Extended measure
12. Waveform capture
13. Overshoot voltage
INPUT CHARACTERISTICS
14. Input Inrush current
15. Input RMS current
16. Input peak current
17. Input power
18. Current harmonics
against regulations
19. Input power factor
20. Input voltage ramp
21. Input freq. ramp
22. AC cycle drop out
23. PLD simulation
REGULATION TESTS
24. Current regulation
25. Voltage regulation
26. Total regulation
TIMING AND TRANSIENT
27. Power up sequence
28. Power down sequence
29. Transient response time
30. Transient spike
31. Turn ON time
32. Rise time
33. Fall time
34. Hold-up time
35. Extra timing
36. Tracking
37. Swing check
PROTECTION TESTS
38. Short circuit
39. OV protection
40. UV protection
41. OL protection
42. OP protection
SPECIAL TESTS
43. Fan speed
44. Auto alignment*
45. Correlation test
46. UUT measurement
verification test
47. High di/ dt loading*
SPECIAL FEATURE
48. Can bus read/ write
49. I2 C read/ write*
50. GPIB read/ write
51. RS-232 read/ write
52. RS-485 read/ write*
53. TTL signal control
54. Relay control
55. Bar code scan*
56. DMM measure
* These test items need to be
created by users by using test
item editor due to the variety of the
UUTs, and unlimited customized or
user defined test items are allowed.
Telecom Power Supply ATS
Telecom Power Supply Testing
For the Switching Mode Rectifier or Telecom Power Supply Testing,
it should build in other special instruments just like:
RF Voltmeter:
It offers measurement with high-input impedance, excellent stability
and low noise. It measures the wide band noise of SMR at different
frequency.
Transmission Impairment measurement Set:
It offers testing of voice-grade data circuits and metallic digital
circuits. It measures the output voltage voice and noise of SMR.
DC to DC Converter Test Fixture
DC to DC Converter
ORDERING INFORMATION
DC to DC Converter ATS
8000 : Switching Power Supply Auto Test System
6011/80611 : Timing/Noise Analyzer
6011N/80611N : Timing/Noise module
DC to DC Converter Testing
6012/80612 : OVP/Short Circuit Tester
Software:
6013/80613 : ON/OFF Controller
Special Design Test Items (Load Fault Power Dissipation Test,
5004ATM : System Controller
Switching Frequency Test, Synchnization Frequency Test)
A800005 : PCI Bus GPIB Card (National Instrument)
A600009 : GPIB Cable (200 cm)
Hardware:
A600010 : GPIB Cable (60 cm)
Create Standard Test Fixture platform (Receiver)
A800004 :19" Rack for Model 8000
A800003 : 8000 software Package
A600011/A800027 : Test Fixture for Model 8000
DC Load Module: Refer to 6300, 6310A, 63200, 6330A, 6340, 63472 Series
Power Analyzer : Refer to Model 6630 , 6632
Digital Power Meter : Refer to Model 66200 Series
AC Source : Refer to Model 6400, 6500, 61500, 61600, 61700 Series
DC Source : Refer to Model 6200, 6200F, 62000P Series
All specifications are subject to change without notice.
Model No.
Switching Power Supply ATS
8000
Solar Cell
Test Equipment
SPECIFICATIONS
Accurate and highly reliable hardware devices:
6330A series
CC/CR/CV
30-1200W
1-500V
Up to 240A
Up to 10A/uS
Voltage/Current
No
No
No
Yes
Yes
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
61700 series
1500-12000VA
0-300V
3 phase
Yes
Yes
No
Yes
No
Yes
Yes
6340 series
CC
625W
0.8-50V
Up to 150A
Up to 150A/uS
Voltage/Current
Voltage/Current
Yes
No
Yes
No
63472 series
CC
200W
0.5-2V
150A
1000/uS
Voltage/Current
Voltage/Current
No
No
Yes
No
Other hardware devices :
■ Digital Multimeter(Agilent-34401A / Keithley 2000),
other types or brands of DMM supported upon
request
■ Digital Storage Oscilloscope(TDS-3000/5000/
7000 series), other types or brands of DSO
supported upon request
PXI Instruments
& Systems
61500 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
Yes
Yes
Yes
Yes
Yes
63200 series
CC/CR/CV/CP
2000-12000W
1-500V
Up to 600A
Up to 25A/uS
Voltage/Current/Power
Current
No
No
Yes
Yes
80613
AC/DC
0-360 deg
277V
30A
200V
60A
Internal
RS 485
General Purpose
Test Instruments
All specifications are subject to change without notice.
62000P series
600,1200,2400W
0-100V/600V
Yes
Yes
Yes
Yes
5V
ON/OFF Controller
MODEL
6013
Input
AC/DC
ON/OFF angle - AC
0-360 deg
Voltage range - AC
250V
Current range - AC
30A
Voltage range - DC
200V
Current range - DC
40A
Measurement Capability By external DMM
Control Interface
Via Chroma 6011
Electrical Safety
Test Instruments
AC Source
MODEL
6400 series
6500 series
Power rating
375-9000VA
1200-9000VA
Voltage range
0-300V
0-300V
Output phase
1 or 3 phase
1 or 3 phase
DC output
No
No
Output measurement
Yes
Yes
Harmonic measurement
No
No
Waveform simulation
No
Yes
Programmable impedance
No
No
Harmonic synthesis
No
Yes
Inter-harmonic synthesis
No
No
* Please refer to respective product catalogs for detail specifications.
80612
Up to 6
< 0.05 ohm
Yes
6 relay signal
Internal / External
100-1M ohm
DC source
Internal
RS 485
Passive Component
Test Instruments
Electronic Load
MODEL
6300 series
6310A series
Load mode
CC/CR/CV/CP
CC/CR/CV
Power rating
60-300W
30-1200W
Voltage range
1-254V
1-500V
Current range
Up to 60A
Up to 240A
Slew rate
Up to 2.5A/uS
Up to 10A/uS
Measurements
Voltage/Current/Power
Voltage/Current
Monitoring output
Current
No
Current share measurement
No
No
Noise measurement
Optional
No
Voltage sense input
Yes
Yes
Sync dynamic
No
No
* Please refer to respective product catalogs for detail specifications.
6012
Up to 6
< 0.1 ohm
Yes
6 relay signal
Internal / External
1K-1M ohm
DC source
By external DMM
Via Chroma 6011
Power Supply
Test Equipment
6200F series
1200-2800W
0-5V/600V
Yes
Yes
Yes
Yes
5V
OVP/Short Circuit Tester
MODEL
NO. of input terminal
Short circuit impedance
Short current measurement
Sync. Signal for short circuit
OVP/UVP testing
Internal impedance range
External OVP/UVP source
Measurement Capability
Control Interface
Optical Inspection
Equipment
DC Source
MODEL
6200 series
Power rating
60-1000W
Voltage range
0-5V/150V
Programmable current limit
Yes
Programmable OV point
Yes
Analog programming
Yes
Remote sensing
Yes
Line-drop compensation
5V
* Please refer to respective product catalogs for detail specifications.
66202
1
24 ranges
3 ranges
8 ranges
Yes
Yes
Yes
No
Yes
No
80611
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
6 sets
4 Input module
16 output / 16 input
8
10
1 for DMM
Video & Color
Test Equipment
66201
1
12 ranges
3 ranges
4 ranges
Yes
Yes
No
No
No
No
6011
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
4 sets
2 Input module
16 output
6
10
2 for DMM &. 2 for DSO
LCD/LCM
Test Equipment
Power Analyzer
MODEL
6630
6632
NO. of input module
1 to 3
1 to 3
Power measurement range
48 ranges
48 ranges
Voltage measurement range
6 ranges
6 ranges
Current measurement range
8 ranges
8 ranges
Front panel display
Yes
No
Front panel editable
Yes
No
Harmonics measurement
Yes
Yes
Flicker measurement
Yes
No
Waveform measurement
Yes
Yes
Build-in regulation limit
Yes
Yes
* Please refer to respective product catalogs for detail specifications.
Timing/Noise Analyzer
MODEL
NO. of input module
Noise measurement range
Low Pass Filter
Input circuit
Timing range
NO. of trigger input
NO. of comparator
Controllable TTL bits
Controllable floating relay
NO. of multiplex input
NO. of multiplex output
LED
Test Equipment
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Semiconductor/IC
Test Equipment
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
11-54
Model No.
Switching Power Supply ATS
8200
GPIB
Chroma Power Supply Auto Test System model 8200 provides
complete solution for PC ATX power supply, adapter and battery
charger testing. The application oriented system structure makes
it the most cost effective test equipment for initial test in power
supply production line.
To meet the power supply test requirements, Chroma Power
Supply Auto Test System model 8200 has built in 20 ready-made
test items. Users can simply enter the test conditions and test the
power supply features while proceeding.
With the report and management functions, Chroma Power Supply
Auto Test System model 8200 is able to provide versatile tools to
establish test documents and perform system administration.
Meanwhile, Chroma Power Supply Auto Test System model 8200
can be upgraded to Chroma model 8000, the ultimate power
supply auto test system, to fit the future test needs by changing
system software and adding new hardware devices.
ORDERING INFORMATION
8200 : Switching Power Supply Auto Test System
8125 : Extended Controller
A820001 : PCI Bus AD Card
A800005 : PCI Bus GPIB Card (National Instrument)
A600009 : GPIB Cable (200 cm)
A600010 : GPIB Cable (60 cm)
A600002 :19" Rack for Model 8200
A820002 : 8200 software Package
A600011/A800027 : Test Fixture for Model 8200
A600013 : Adapter for A600011/A600012 Test Fixture
(PC Standard)
A600014 : Adapter for A600011/A600012 Test Fixture
(Terminal Block)
DC Load Module: Refer to Model 6310A, 6330A Series
AC Source : Refer to Model 6400, 6500,61500, 61600 Series
SPECIFICATIONS
Accurate and highly reliable hardware devices :
Switching Power Supply ATS
Model 8200
KEY FEATURES
■ User editable test program
■ User editable report format
■ User authority control
■ Release control
■ Activity log
■ Comprehensive hardware modules provide high
accuracy repetitive and measurements
■ High test throughput by system default test items
■ Cost effective
■ Windows 98/NT/2000 or higher based software
TEST ITEMS
1. DC output voltage
2. DC output current
3. Voltage regulation
4. Current regulation
5. Turn ON time
6. Hold-up time
7. Power good signal
8. P/S ON signal
9. Efficiency
10. Input RMS current
11. Input peak current
12. Input power
13. Input power factor
14. Short circuit test
15. Short circuit current
16. OV protection
17. OL protection
18. OP protection
19. In-test adjustment
11-55
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
Extended Controller
MODEL
Input channels for timing
Timing accuracy
Controllable TTL bits
Input circuit
Input impedance
Output channels for OVP
OVP voltage
Maximum current
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Electronic Load
MODEL
6310A/6330A series
Load mode
CC/CR/CV
Power rating
30-1200W
Voltage range
1-500V
Current range
Up to 240A
Slew rate
Up to 10A/uS
Measurements
Voltage/Current
Monitoring output
No
Current share measurement
No
Noise measurement
No
Voltage sense input
Yes
* Please refer to respective product catalogs for
detail specifications.
8125
8 differential
40 uS
16
Differential input
10M ohm
3
8V/4.8V/16V
3A/Channel
AC Source
MODEL
6400 series
6500 series
Power rating
375-9000VA
1200-9000VA
Voltage range
0-300V
0-300V
Output phase
1 or 3 phase
1 or 3 phase
DC output
No
No
Output measurement
Yes
Yes
Harmonic measurement
No
No
Waveform simulation
No
Yes
Programmable impedance
No
No
Harmonic synthesis
No
Yes
Inter-harmonic synthesis
No
No
* Please refer to respective product catalogs for detail specifications.
61500 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
Yes
Yes
Yes
Yes
Yes
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
All specifications are subject to change without notice.
Model No.
PC Power Supply ATS
RS-232
GPIB
PFC
Power Supply
Test Equipment
REGULATION TESTS
18. Line regulation
19. Load regulation
20. Combine regulation
21. Dynamic load regulation
22. Sync.dynamic load regulation
Passive Component
Test Instruments
TIMING AND TRANSIENT
23. Transient spike
24. Power up sequence
25. Rise time
26. Fall time
27. Power off time
28. Extended measure
Electrical Safety
Test Instruments
PROTECTION TESTS
29. Short circuit
30. Over voltage protection
31. Over load protection
General Purpose
Test Instruments
SPECIAL TESTS
32. Voltage monotonic test
33. 100MHz bandwidth noise test
34. Average efficiency test
35. Power on/off cycle test
SPECIAL FEATURE
36. TTL signal control
37. Relay control
• Continued on next page ➟
All specifications are subject to change without notice.
11-56
PXI Instruments
& Systems
Chroma 8010 ATS was designed specifically with PC power
supply characteristics in mind, with customized standard test
items providing excellent test performance and optimized for mass
production. The software provides a user friendly interface and
intuitive controls suited for the production line.
INPUT CHARACTERISTICS
11. Input inrush current
12. Input RMS current
13. Input power
14. Input power factor
15. Input voltage ramp
16. Input frequency ramp
17. AC cycle drop out
Optical Inspection
Equipment
Chroma 8010 PC Power Supply ATS is the test system of choice
for PC power testing on the production line. Its test performance
not only compares favorably with the Chroma 6000 ATS, but also
has the flexibility of the Chroma 8000ATS hardware architecture.
Available for selection are a range of hardware devices including
AC/DC Power Supply, Electronic Load, Timing/Noise Analyzer,
Power Meter and Extended Measurement Controller.
Video & Color
Test Equipment
KEY FEATURES
■ Equipped with both of the test performance of 6000 ATS and
the flexible hardware architecture of 8000 ATS
■ Provide optimized standard test items for the Unit Under Test
(PC Power Supply) to deliver excellent test performance
■ Easy-to-use software function specifically designed to meet the
production line needs
■ Flexible software platform with the following functions
- User editable test program
- User editable test report format
- Test report generator
- Statistical report
- User authority control
- Release control
- Activity log
- Support bar code reader
■ New test items and expandable hardware allows the Chroma
8010 ATS to meet the new testing requirements in the PC
power industry
- 100MHz Noise measurement
- Output voltage monotonic rise test
- Average efficiency test that complies with EPA & 80Plus
■ Windows 98/2000/NT/XP based software
■ Offer the best performance/price ratio
LCD/LCM
Test Equipment
PC Power Supply ATS
Model 8010
8010 : PC Power Supply ATS
6011 : Timing/Noise Analyzer
80611N : Timing/Noise module
8126 : Extended Controller
5004ATM : System Controller
A600011/ A800027 : Test Fixture
A800004 : 19" Rack for Model 8010
A800035 : Monotonic Rise Detector
DC Electronic Load : Refer to Model 6330A Series
Digital Power Meter : Refer to Model 66200 Series
AC Source : Refer to Model 6500, 61500, 61600 Series
DC Source : Refer to Model 6200, 6200F, 62000P Series
100MHz Digitizer : NI 5112 Digitizer
LED
Test Equipment
Chroma 8010 ATS software runs under the user friendly Windows
98/2000/NT/XP operating environment, providing the test engineer
a dedicated PC power supply testing system with easy access to
Windows resources.
ORDERING INFORMATION
Semiconductor/IC
Test Equipment
New test items and expandable hardware allows the Chroma
8010 ATS to meet the new testing requirements in the PC power
industry such as 100 MHz bandwidth noise measurement, voltage
monotonic rise test, average efficiency test to comply with EPA
requirements and various other tests.
Optimized Test Items
OUTPUT PERFORMANCES
1. DC output voltage
2. Peak-to-peak noise
3. RMS noise
4. Efficiency
5. In-test adjustment
6. Power good (PG) signal
7. Power fail (PF) signal
8. PS/ON signal
9. Extended measure
10. Overshoot voltage
Solar Cell
Test Equipment
USB
8010
Model No.
PC Power Supply ATS
8010
SPECIFICATIONS
Accurate and highly reliable hardware devices:
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Power Analyzer
MODEL
66201
NO. of input module
1
Power measurement range
12 ranges
Voltage measurement range
3 ranges
Current measurement range
4 ranges
Front panel display
Yes
Front panel editable
Yes
Harmonics measurement
No
Flicker measurement
No
Waveform measurement
No
Build-in regulation limit
No
* Please refer to respective product catalogs for detail specifications.
Timing/Noise Analyzer
MODEL
NO. of input module
Noise measurement range
Low Pass Filter
Input circuit
Timing range
NO. of trigger input
NO. of comparator
Controllable TTL bits
Controllable floating relay
NO. of multiplex input
NO. of multiplex output
6011
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
4 sets
2 Input module
16 output
6
10
2 for DMM &. 2 for DSO
66202
1
24 ranges
3 ranges
8 ranges
Yes
Yes
Yes
No
Yes
No
80611
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
6 sets
4 Input module
16 output / 16 input
8
10
1 for DMM
Electronic Load
MODEL
6330A series
Load mode
CC/CR/CV
Power rating
30-1200W
Voltage range
1-500V
Current range
Up to 240A
Slew rate
Up to 10A/uS
Measurements
Voltage/Current
Monitoring output
No
Current share measurement
No
Noise measurement
No
Voltage sense input
Yes
Sync dynamic
Yes
* Please refer to respective product catalogs for detail specifications.
11-57
Extended Controller
Model
Short circuit
Input channel
Input Voltage Rating
Input Current Rating
Short relay
OVP
Output channel
Dc source input
Input Voltage Rating
Input Current Rating
Floating Relay
Type
No. of Relay
Rating
External Relay
No. of Relay
Rating
Timing (For Power Good / Power Fail Time)
Input channel
Input Voltage Rating
Range
Accuracy
Resolution
Trigger Reference Voltage
Reference Voltage Accuracy
Input Current Rating
Input Voltage Rating
Range
8126
10
60Vdc
20Adc
30A continuous
10
1
60Vdc
20A continuous
SPST
6
5A
1 via rear panel
5A
2
5.5Vdc
0-6.4Sec
1mS
100uS
3Vdc / 4.5Vdc Select
± 0.1V
20Adc
5.5Vdc
0-6.4Sec
DC Source
MODEL
6200 series
6200F series
Power rating
60-1000W
1200-2800W
Voltage range
0-5V/150V
0-5V/600V
Programmable current limit
Yes
Yes
Programmable OV point
Yes
Yes
Analog programming
Yes
Yes
Remote sensing
Yes
Yes
Line-drop compensation
5V
5V
* Please refer to respective product catalogs for detail specifications.
62000P series
600,1200,2400W
0-100V/600V
Yes
Yes
Yes
Yes
5V
AC Source
MODEL
6500 series
61500 series
Power rating
1200-9000VA
500-18000VA
Voltage range
0-300V
0-300V
Output phase
1 or 3 phase
1 or 3 phase
DC output
No
Yes
Output measurement
Yes
Yes
Harmonic measurement
No
Yes
Waveform simulation
Yes
Yes
Programmable impedance
No
Yes
Harmonic synthesis
Yes
Yes
Inter-harmonic synthesis
No
Yes
* Please refer to respective product catalogs for detail specifications.
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
All specifications are subject to change without notice.
Model No.
Adapter/Charger ATS
GPIB
Adapter/Charger ATS
Model 8020
SPECIFICATIONS
Accurate and highly reliable hardware devices:
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Power Analyzer
MODEL
66201
66202
NO. of input module
1
1
Power measurement range
12 ranges
24 ranges
Voltage measurement range
3 ranges
3 ranges
Current measurement range
4 ranges
8 ranges
Front panel display
Yes
Yes
Front panel editable
Yes
Yes
Harmonics measurement
No
Yes
Flicker measurement
No
No
Waveform measurement
No
Yes
Build-in regulation limit
No
No
* Please refer to respective product catalogs for detail specifications.
80611
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
6 sets
4 Input module
16 output / 16 input
8
10
1 for DMM
Electronic Load
MODEL
6330A series
Load mode
CC/CR/CV
Power rating
30-1200W
Voltage range
1-500V
Current range
Up to 240A
Slew rate
Up to 10A/uS
Measurements
Voltage/Current
Monitoring output
No
Current share measurement
No
Noise measurement
No
Voltage sense input
Yes
Sync dynamic
Yes
* Please refer to respective product catalogs for detail specifications.
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
PXI Instruments
& Systems
61500 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
Yes
Yes
Yes
Yes
Yes
General Purpose
Test Instruments
AC Source
MODEL
6500 series
Power rating
1200-9000VA
Voltage range
0-300V
Output phase
1 or 3 phase
DC output
No
Output measurement
Yes
Harmonic measurement
No
Waveform simulation
Yes
Programmable impedance
No
Harmonic synthesis
Yes
Inter-harmonic synthesis
No
* Please refer to respective product catalogs for detail specifications.
Timing/Noise Analyzer
MODEL
NO. of input module
Noise measurement range
Low Pass Filter
Input circuit
Timing range
NO. of trigger input
NO. of comparator
Controllable TTL bits
Controllable floating relay
NO. of multiplex input
NO. of multiplex output
Electrical Safety
Test Instruments
All specifications are subject to change without notice.
20U
Passive Component
Test Instruments
Chroma 8020 ATS runs under the easy-to-learn Windows
98/2000/NT/XP environment with a specialized power test system
for test engineers so that they can utilize the Windows resources
easily.
SPECIAL FEATURE
28. TTL signal control
29. Relay control
Power Supply
Test Equipment
New test items and extended hardware are expanded to Chroma
8020 ATS for the new test requirements in the Adapter/Charger
industry, such as average efficiency to comply with Energy Star
requirement, and etc.
SPECIAL TESTS
27. Average efficiency test
Optical Inspection
Equipment
Chroma 8020 has standard test items specially customized and
optimized for the features of Adapter and Charger that provides
excellent test performance to meet the requirements of mass
production. Meanwhile, the software equipped is very friendly and
easy to operate that is suitable for production line use.
PROTECTION TESTS
24. Short circuit
25. Over load protection
26. Over voltage protection
Video & Color
Test Equipment
Chroma 8020 Adapter/Charger ATS is the best test system for
testing Adapter and Charger in the production line. 8020 is able
to test multiple UUTs concurrently that improve productivity
significantly, the hardware architecture is also as flexible as
Chroma 8000 ATS. There are many hardware devices available
for selection such as AC Power Supply, Electronic Load, Timing/
Noise Analyzer and Power Meter.
REGULATION TESTS
15. Line regulation
16. Load regulation
TIMING AND TRANSIENT
20. Power up sequence
21. Rise time
22. Fall time
23. Power off time
ORDERING INFORMATION
8020 : Adapter / Charger ATS
80611 : Timing/Noise Analyzer
80611N : Timing/Noise Module
5004ATM : System Controller
A800004 : 19" Rack for Model 8020
A806102 : Digital Output Module
A802001 : 4+4 Multi-UUT Test Fixture
DC Electronic Load : Refer to Model 6330A Series
Digital Power Meter : Refer to Model 66200 Series
AC Source : Refer to Model 6500, 61500, 61600 Series
I/0 Card : ADLink 7230
LCD/LCM
Test Equipment
KEY FEATURES
■ Be able to test multiple UUTs concurrently that improve
productivity significantly
■ Equipped with both of the test performance of 6000 ATS
and the flexible hardware architecture of 8000 ATS
■ Provide optimized standard test items for the Unit Under Test
(adapter/charger) to deliver excellent test performance
■ Easy-to-use software function specially designed to meet the
production line needs
■ Flexible software platform with the following functions
- Test Program editor
- Test Report format editor
- Test Report Generator
- Statistics Analysis Report editor
- User level setting
- Release control
- Activity log
- Supporting bar code reader
■ New test items and extended hardware are able to expand to
fulfill the new requirements for the PC industry
- Average efficiency test that complies with Energy Star
■ Rack specially designed more meet to the production line
■ Windows 98/2000/NT/XP software platform
INPUT CHARACTERISTICS
9. Input inrush current
10. Input RMS current
11. Input power
12. Input power factor
13. AC cycle drop out
14. Input voltage ramp
17. Combine regulation
18. Dynamic load regulation
19. Sync. dynamic load regulation
LED
Test Equipment
15U
PFC
Semiconductor/IC
Test Equipment
Optimized Test Items
OUTPUT PERFORMANCES
1. DC output voltage
2. DC output current
3. DC output power
4. Peak-to-peak noise
5. RMS noise
6. Efficiency
7. In-test adjustment
8. Overshoot voltage
Solar Cell
Test Equipment
RS-232
8020
11-58
Model No.
LCD Inverter ATS
8490
GPIB
The Chroma LCD Inverter Auto Test System model 8490 is the
ultimate solution for LCD inverter. It not only test traditional DC to
AC inverter but also the LIPS (LCD Integrated Power Supply) type
that combines adapter and inverter in one board.
It has wild variety of choices in hardware, such as AC/DC Source,
Power Analyzer, Electronic Load, DMM, Oscilloscope, Timing/
Noise Analyzer , OVP/Short Tester and ON/OFF Controller. And 3
PCI interface cards-Measurement Card, Control Card, DMM Card
to measure all of the inverter parameter. Combining with the open
architecture system software platform - PowerPro III, it gives users
a flexible, powerful and cost effective auto test system for both
inverter and LIPS type testing.
LCD Inverter ATS
Model 8490
KEY FEATURES
■ For both inverter & LIPS testing
■ Standard & probe pin test fixture selectable
■ Synchronized measurement in multi-channel
reduce the test time
■ Expandable PCI interface card
- Measurement Card
- Control Card
- DMM Card
■ Three brightness control modes
- DC Voltage, PWM, and SM Bus control
■ Built-in timing measurement
■ Compensation function to correlate the error
caused by fixture
■ Burst mode frequency & duty measurement
■ Open architecture software
- Expandable hardware support
- Support instrument with GPIB/ RS-232/
RS-485/I2C interface
- User editable test library
- User editable test programs
- User editable reports
- Statistical report
- On-line Softpanel
- User authority control
- Release control
- Activity log
- Support Barcode reader
- Support Web-cam for remote monitoring via
internet
■ Other hardware expandable upon request
■ Windows 98/2000/NT or higher based software
11-59
Test fixture has been the most critical ingredient for LCD inverter
ATS due to the inverter is very easy to be influenced by loading
effect that from measurement circuit and cable (See the fixture
module equivalent capacitance in test fixture specification).
Chroma LCD inverter auto test system model 8490 provides
standard and various test fixtures such as probe pin design for
those inverters that are keen in reducing loading effect. All fixtures
use insulation module design. Two different modules can be
selected (standard & high current module) for different types of
inverter. The standard module is for CCFL inverter while the high
current module for EEFL inverter. Each module built-in 5 high
voltage relay to guarantee operating in high voltage environment.
Furthermore two different resistors can be added on the fixture for
loading selection.
With the powerful report, statistic and management functions,
Chroma LCD Inverter Auto Test System model 8490 is able to
provide complete tools to generate various test documents and
improve system administration. Since the test and statistical
reports are equally important nowadays for R/D evaluation, QA
verification and mass production tests. So these save users a great
deal of time for paper work.
Working under Windows98/2000/NT/XP operation system,
Chroma 8490 LCD Inverter Auto Test System is able to get all the
resources provided by Windows; thus, it can easily export the test
results to network or to your web-page for remote manufacturing
monitoring.
The Comprehensive Test Items for LIPS Testing:
OUTPUT PERFORMANCES
1. Lamp current
2. Lamp voltage
3. Lamp frequency
4. Kickoff (Vopen) voltage
5. DC output voltage
6. Peak-peak noise
7. Efficiency
INPUT CHARACTERISTICS
8. Input voltage
9. Input current
10. Inrush current
11. DIM frequency
12. DCR
13. Input RMS current
14. Input peck current
15. Input power
16. Input power factor
REGULATION TESTS
17. Voltage regulation
18. Combine regulation
TIMING TESTS
19. Kickoff (Vopen, shut down) delay time
20. Voltage turn on time
21. Current turn on time
22. Voltage turn off time
23. Current turn off time
24. Voltage rise time
25. Current rise time
26. Voltage fall time
27. Current fall time
28. Turn on time
29. Rise time
30. Fall time
31. Hold-up time
PROTECTION TESTS
32. Short circuit test
33. Open circuit test
34. Short circuit
35. OV protection
36. UV protection
37. OL protection
38. OP protection
SPECIAL TESTS
39. Burst Mode frequency & duty measurement
40. Lamp current balance
41. Waveform unbalance rate check
42. Waveform wave height check
43. GPIB read/write
44. RS-232 read/write
The Comprehensive Test Items for D/A Inverter Testing:
OUTPUT PERFORMANCES
1. Lamp current
2. Lamp voltage
3. Lamp frequency
4. Kickoff (Vopen) voltage
5. Efficiency
INPUT CHARACTERISTICS
5. Input voltage
6. Input current
7. Inrush current
8. DIM frequency
9. DCR
TIMING TESTS
10. Kickoff (Vopen, shut down) delay time
11. Voltage turn on time
12. Current turn on time
13. Voltage turn off time
14. Current turn off time
15. Voltage rise time
16. Current rise time
17. Voltage fall time
18. Current fall time
PROTECTION TESTS
19. Short circuit test
20. Open circuit test
SPECIAL TESTS
21. Burst mode frequency & duty measurement
22. Lamp current balance
23. Waveform unbalance rate check
24. Waveform wave height check
All specifications are subject to change without notice.
Model No.
LCD Inverter ATS
8490
Solar Cell
Test Equipment
SPECIFICATIONS-1
Accurate and highly reliable hardware devices:
66202
1
24 ranges
3 ranges
8 ranges
Yes
Yes
Yes
No
Yes
No
62000P series
600, 1200, 2400W
0-100V/600V
Yes
Yes
Yes
Yes
5V
6330A series
CC/CR/CV
30-1200W
1-500V
Up to 240A
Up to 10A/uS
Voltage/Current
No
No
No
Yes
Yes
ON/OFF Controller
MODEL
6013
Input
AC/DC
ON/OFF angle - AC
0-360 deg
Voltage range - AC
250V
Current range - AC
30A
Voltage range - DC
200V
Current range - DC
40A
Measurement Capability By external DMM
Control Interface
Via Chroma 6011
63200 series
CC/CR/CV/CP
2000-12000W
1-500V
Up to 600A
Up to 25A/uS
Voltage/Current/Power
Current
No
No
Yes
Yes
Other hardware devices :
■ Digital Multimeter
(Agilent-34401A/Keithley 2000),
other types or brands of DMM
supported upon request
■ Digital Storage Oscilloscope
(TDS-3000/5000/7000 series),
other types or brands of DSO
supported upon request
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
General Purpose
Test Instruments
• Continued on next page ➟
All specifications are subject to change without notice.
11-60
PXI Instruments
& Systems
61500 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
Yes
Yes
Yes
Yes
Yes
6340 series
CC
625W
0.8-50V
Up to 150A
Up to 150A/uS
Voltage/Current
Voltage/Current
Yes
No
Yes
No
80613
AC/DC
0-360 deg
277V
30A
200V
60A
Internal
RS 485
Electrical Safety
Test Instruments
6500 series
1200-9000VA
0-300V
1 or 3 phase
No
Yes
No
Yes
No
Yes
No
80612
Up to 6
< 0.05 ohm
Yes
6 relay signal
Internal / External
100-1M ohm
DC source
Internal
RS 485
Passive Component
Test Instruments
AC Source
MODEL
6400 series
Power rating
375-9000VA
Voltage range
0-300V
Output phase
1 or 3 phase
DC output
No
Output measurement
Yes
Harmonic measurement
No
Waveform simulation
No
Programmable impedance
No
Harmonic synthesis
No
Inter-harmonic synthesis
No
* Please refer to respective product catalogs for detail specifications.
6012
Up to 6
< 0.1 ohm
Yes
6 relay signal
Internal / External
1K-1M ohm
DC source
By external DMM
Via Chroma 6011
Power Supply
Test Equipment
Electronic Load
MODEL
6300 series
6310A series
Load mode
CC/CR/CV/CP
CC/CR/CV
Power rating
60-300W
30-1200W
Voltage range
1-254V
1-500V
Current range
Up to 60A
Up to 240A
Slew rate
Up to 2.5A/uS
Up to 10A/uS
Measurements
Voltage/Current/Power
Voltage/Current
Monitoring output
Current
No
Current share measurement
No
No
Noise measurement
Optional
No
Voltage sense input
Yes
Yes
Sync dynamic
No
No
* Please refer to respective product catalogs for detail specifications.
OVP/Short Circuit Tester
MODEL
NO. of input terminal
Short circuit impedance
Short current measurement
Sync. Signal for short circuit
OVP/UVP testing
Internal impedance range
External OVP/UVP source
Measurement Capability
Control Interface
Optical Inspection
Equipment
6200F series
1200-2800W
0-5V/600V
Yes
Yes
Yes
Yes
5V
80611
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
6 sets
4 Input module
16 output / 16 input
8
10
1 for DMM
Video & Color
Test Equipment
DC Source
MODEL
6200 series
Power rating
60-1000W
Voltage range
0-5V/150V
Programmable current limit
Yes
Programmable OV point
Yes
Analog programming
Yes
Remote sensing
Yes
Line-drop compensation
5V
* Please refer to respective product catalogs for detail specifications.
66201
1
12 ranges
3 ranges
4 ranges
Yes
Yes
No
No
No
No
6011
Up to 10
2V/0.4V
Up to 20MHz
Differential input
0-64 second
4 sets
2 Input module
16 output
6
10
2 for DMM &. 2 for DSO
LCD/LCM
Test Equipment
Power Analyzer
MODEL
6630
6632
NO. of input module
1 to 3
1 to 3
Power measurement range
48 ranges
48 ranges
Voltage measurement range
6 ranges
6 ranges
Current measurement range
8 ranges
8 ranges
Front panel display
Yes
No
Front panel editable
Yes
No
Harmonics measurement
Yes
Yes
Flicker measurement
Yes
No
Waveform measurement
Yes
Yes
Build-in regulation limit
Yes
Yes
* Please refer to respective product catalogs for detail specifications.
Timing/Noise Analyzer
MODEL
NO. of input module
Noise measurement range
Low Pass Filter
Input circuit
Timing range
NO. of trigger input
NO. of comparator
Controllable TTL bits
Controllable floating relay
NO. of multiplex input
NO. of multiplex output
LED
Test Equipment
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Semiconductor/IC
Test Equipment
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
Model No.
LCD Inverter ATS
8490
SPECIFICATIONS-2
Measurement Card
84902
No. of channel
Vx2, Ix2
Vac measurement
Input Voltage
5Vpk max. (reference to 5000 Vpk)
Vpk+ / Vpk- / Vpp measurement
Range
5Vpk
Bandwidth
10k ~ 200kHz
Resolution
14 bits
Accuracy
0.5 % + 0.5 % F.S. (10K ~ 100kHz) ,1 % + 0.5 % F.S. (100K ~ 200kHz)
Vrms measurement
Range
3.5KVrms~2KVrms / 2KVrms~1KVrms / 1KVrms~500Vrms
Bandwidth
10k ~ 200kHz
Resolution
14 bits
Accuracy
1 % + 0.2 % F.S. (10K ~ 100kHz) ,1.5 % + 0.2 % F.S. (100K ~ 200kHz)
Iac measurement
Input Voltage
5Vpk max. ( reference to 50mApk)
Ipk+ / Ipk- / Ipp measurement
Range
50mApk
Bandwidth
10k ~ 200kHz
Resolution
14 bits
Accuracy
0.5 % + 0.5 % F.S. (10K ~ 100kHz) ,1 % + 0.5 % F.S. (100K ~ 200kHz)
Irms measurement
35mArms ~ 20mArms / 20mArms ~ 10mArms / 10mAVrms ~ 5mArms
Range
5mArms ~ 2.5mArms / 2.5mArms ~ 1.25mArms/ 1.25mA ~ 0.6mArms
Bandwidth
10K ~ 200KHz
Resolution
14 bits
Accuracy
1 % + 0.2 % F.S. (10K ~ 100kHz) ,1.5 % + 0.2 % F.S. (100K ~ 200kHz)
Pac measurement
Range
V range x I range
Bandwidth
10K ~ 200KHz
Resolution
14 bits
Accuracy
1 % + 0.2 % F.S. (10K ~ 100kHz) , 2 % + 0.3 % F.S. (100K ~ 200kHz)
Frequency measurement
Range
10K ~ 200KHz
Resolution
1Hz
Accuracy
0.1 % reading
Input
Via voltage / current input
Timing measurement
Trigger input
External x 1 and V measurement input and I measurement input
Trigger level
Range
5 % ~ 95 % F.S.
Resolution
10V for voltage / 0.1mA for current
Accuracy
1 % setting
Timing measure
Resolution
1µS / 1mS
Accuracy
5µS / 5mS
Timing range
65mS / 65sec
Burst Mode measurement
Frequency
Range
10Hz ~ 2KHz
Resolution
0.1Hz
Accuracy
0.1 % reading
Duty
Range
Resolution
Accuracy
Measurement speed
Interface
Dimension
11-61
Control Card
84903
BL control
DC level control
Program level
0 ~ 10V
Resolution
11 bits
Level Accuracy
0.5 % setting + 0.1 % F.S.
Sourcing current
20mA
PWM control
Program level
0 ~ 10V
Resolution
7 bits
Accuracy
2 % + 1 % F.S (No Load) / 5.5% +1% F.S. (20mA output)
Sourcing current
20mA
Frequency
20Hz ~ 10kHz / 10kHz ~ 100kHz
Freq. Resolution
1Hz
Freq. Accuracy
0.1% (10kHz) / 1% (100kHz)
Duty
0 % ~ 100 % (10kHz) / 5% ~ 95% (100kHz)
Duty Resolution
1%
Duty Accuracy
Error Max : 100nS
SMBus control
DC Output
5V
SM DATA
Bidirectional
SM CLK
Bidirectional
BLI measurement (DC)
Range
0 ~ 20mA
Resolution
15 bits
Accuracy
0.1% reading + 1% F.S.
Analog output (Enable V and Vsave1, 2)
Channel
No. of channel
1 for Enable 2 for Vsave
DC level output
Program level
0 ~ 10V
Resolution
11 bits
Level Accuracy
0.5 % setting + 0.1 % F.S.
Sourcing current
20mA
Analog I measurement (Idc)
Range
0 ~ 20mA
Resolution
15 bits
Accuracy
0.1% reading + 1% F.S.
Digital I/O
No. of channel
12 bits For Output 4 bits For Input
Output type
Open collector
Measurement speed
< 30mS
Interface
PCI
Dimension
1 Slot width
0.05ms ~ 90ms
0.001ms
Error Max : 100µS
< 10mS
PCI
1 Slot width
All specifications are subject to change without notice.
8490
Solar Cell
Test Equipment
ORDERING INFORMATION
8490 : LCD Inverter ATS
84902 : Measurement Card
84903 : Control Card
84904 : DMM Card
A849005 : 16 Channels Inverter Test Fixture
A849007 : 8 Channels LIPS Test Fixture
A849008 : Control Unit
A849009 : 24 Channels Inverter Test Fixture
A849010 : 8490 software
A849013 : 20 Channels Inverter Automatic Tester
A849015 : PCI Expansion Kit
A849016 : 24 Channels Inverter Automatic Tester
A849018 : AC to DC Interconnecting Box
6011 / 80611 : Timing / Noise Analyzer
6011N / 80611N : Timing / Noise Module
6012 / 80612 : OVP / Short Circuit Tester
6013 / 80613 : ON / OFF Controller
DC Load Module : Refer to Model 6300, 6310A, 6330A, 63200, 6340 series
Power Analyzer : Refer to Model 6630, 6632
Digital Power Meter : Refer to Model 66200 series
AC Source : Refer to Model 6400, 6500, 61500, 61600 series
DC Source : Refer to Model 6200, 6200F, 62000P series
Semiconductor/IC
Test Equipment
LED
Test Equipment
LCD/LCM
Test Equipment
Video & Color
Test Equipment
A849005 : 16 Channels Inverter Test Fixture
84903 : Control Card
A849013 : 20 Channels Inverter Automatic Tester
* Patent Number : KR PAT. 0425358
(China Patent : 200620112883.6)
Power Supply
Test Equipment
84902 : Measurement Card
Optical Inspection
Equipment
DMM Card
84904
No. of multiplexer input
20 (1 ch max 200V, others max 60V)
Vdc measurement
Range
200V/ 60V/ 20V/ 6V/ 2V/ 0.6V/ Auto
Resolution
15 bits
Accuracy
0.05 % + 0.05 % F.S.
Frequency measurement
Range
10 ~ 10kHz
Resolution
1Hz
Accuracy
0.05 % F.S.
Resistance measurement
Range
10Ω ~ 2KΩ / 10Ω ~ 20KΩ / Auto
Resolution
1Ω / 0.1Ω
Accuracy
2 % reading + 0.01 % F.S.
Measurement speed
< 50m Sec including relay switching
Measurement type
Single channel and Scan mode
Interface
PCI
Dimension
1 Slot width
Test Fixture - Standard with HV Relays
Load Voltage measurement
Range
100 Vpk ~ 5000 Vpk
Bandwidth
10k ~ 200kHz
Accuracy
1% + 0.5 % F.S. (10K~200kHz)
Vopen Voltage measurement
Range
100 Vpk ~ 5000 Vpk
Bandwidth
10k ~ 200kHz
Accuracy
1.5 % + 0.1 % F.S. (10K~200kHz)
Iac measurement
0.1m Apk ~ 50m Apk (Standard Module) ,1m Apk ~ 500m Apk
Range
(High Current Module)
Bandwidth
10k ~ 200kHz
Accuracy
1 % + 0.1 % F.S. (10K~200kHz)
Iin measurement
Range
0 ~ 0.01A / 0~5A / 0~20A
Accuracy
0.5 % + 0.1 % F.S.
Module Parasitic Capacitance
H.V.-›RTN
Approx. 7.3 pF
Vopen-›RTN
Approx. 4.3 pF
Test Fixture - Probe Pin
Customized Low Parasitic Capacitance (< 2pF/channels)
Automatic Tester design upon request.
Model No.
LCD Inverter ATS
Electrical Safety
Test Instruments
A849016 : 24 Channels Inverter Automatic Tester
Passive Component
Test Instruments
84904 : DMM Card
General Purpose
Test Instruments
All specifications are subject to change without notice.
A849018 : AC to DC Interconnecting Box
11-62
PXI Instruments
& Systems
Model 8490 for D/A Inverter
Model No.
Electronic Ballast ATS
USB
GPIB
RS-232
8495
PFC
Chroma 8495 ATS software runs under the user friendly Windows
98/2000/NT/XP operating environment, providing the test
engineer a dedicated Electronic Ballast testing system with easy
access to Windows resources.
Optimized Equipment & Test Items
Due to the Electronic Ballast has high voltage & high frequency
outputs, high accuracy Power Analyzers are required to measure
its output performance and oscilloscopes to meet timing
measurement requirements. These testing equipments are
relatively expensive, increasing the cost of testing. With the
Chroma testing solution, using the Electronic Ballast characteristic
special design PCI interface cards & measurement module will
significantly reduce the test equipments costs.
Chroma 8495 ATS is equipped with optimized standard test
items for Electronic Ballast (the Unit Under Test), the user is only
required to define the test conditions and specifications for the
standard test items to perform the test.
Electronic Ballast ATS
Model 8495
KEY FEATURES
■ For lighting electronic ballast testing
■ Capable to test Multi-ballast/Multi-output concurrently that
improve productivity
■ Provide optimized standard test items for the Unit Under Test
(Electronic Ballast) to deliver excellent test performance
■ Easy-to-use software function specifically designed to meet
the production line needs
■ Flexible software platform with the following functions
- User editable test program
- User editable test report format
- Test report generator
- Statistical report
- User authority control
- Release control
- Activity log
- Support bar code reader
■ Windows 98/2000/NT/XP based software
■ Offer the best performance/price ratio
Chroma 8495 Electronic Ballast ATS is the test system of choice
for lighting electronic ballast testing on the production line. It is
able to test Multi-ballast/Multi-output concurrently improving
productivity significantly, and capable testing four, 1 or 2 lamps
ballasts & two, 3 or 4 lamps ballasts at a time. The hardware
devices available for selection include AC/DC Power Supply,
Power Meter, PCI interface function card, Ballast Tester and
Ballast Fixture Box.
Chroma 8495 ATS was designed specifically with Lighting
Electronic Ballast characteristics in mind, with optimized
standard test items providing excellent test performance for mass
production. The software provides a user friendly interface and
intuitive controls suited for the production line.
With the flexibility of the Chroma 8495 ATS architecture, future
Electronic Ballast testing requirements can be easily added.
Chroma 8495 ATS software comes packaged with report generator,
statistical analysis and management functions, allowing the
creation of test and statistical reports to meet modern quality
control and production requirements. For total control of the
production flow, the 8495 ATS can be connected to the Shop-Floor
System.
11-63
The optimized test item covers 4 kinds of power supply test
requirements. The OUTPUT PERFORMANCES verifies the output
characteristics of the UUT. The INPUT CHARACTERISTIC checks
the power supply input parameters. TIMING & TRANSIENT
tests the timing and transient states during power-on cycle. The
PROTECTION TESTS trigger and tests the protection circuit.
Optimized Test Items
OUTPUT PERFORMANCES
1. Heating voltage
2. Start-up voltage
3. Lamp voltage
4. Cathode current
5. Lamp current
6. Heating frequency
7. Lamp frequency
8. Efficiency
9. Output power
INPUT CHARACTERISTICS
10. Input voltage
11. Input current
12. Input power
13. Input power Factor
14. Input crest Factor
15. Energy
16. THD
17. IEC61000-3-2 harmonic test
TIMING & TRANSIENT
18. Heating time
19. Time to standby
PROTECTION TESTS
20. Over voltage protection
SPECIFICATIONS-1
Accurate and highly reliable hardware devices:
System Controller
MODEL
CPU
SRAM
DRAM
Hard drive
CD-ROM
Monitor
Keyboard
I/O
System Interface
System I/O
GPIB board
PC/IPC
Pentium III 600 or faster
256KB
512MB or higher
8.3GB or higher
40X or faster
15''
101 keys
Mouse/Print port
GPIB/RS-232
DIO Card
NI-PCI GPIB Card
Power Meter
MODEL
66201
66202
NO. of input module
1
1
Power measurement range
12 ranges
24 ranges
Voltage measurement range
3 ranges
3 ranges
Current measurement range
4 ranges
8 ranges
Front panel display
Yes
Yes
Front panel editable
Yes
Yes
Harmonics measurement
No
Yes
Flicker measurement
No
No
Waveform measurement
No
Yes
Build-in regulation limit
No
No
* Please refer to respective product catalogs for detail specifications.
AC Source
MODEL
6500 series
Power rating
1200-9000VA
Voltage range
0-300V
Output phase
1 or 3 phase
DC output
No
Output measurement
Yes
Harmonic measurement
No
Waveform simulation
Yes
Programmable impedance
No
Harmonic synthesis
Yes
Inter-harmonic synthesis
No
* Please refer to respective product catalogs for detail specifications.
61500 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
Yes
Yes
Yes
Yes
Yes
61600 series
500-18000VA
0-300V
1 or 3 phase
Yes
Yes
No
No
No
No
No
All specifications are subject to change without notice.
Model No.
Electronic Ballast ATS
8495
Ballast Measurement Card
84951
1000~700V/700~350V/350~150V/150~100V/100~50V/50~25V
AC only/AC+DC
14bits
1%+0.2%F.S.
3000Vpk
14bits
0.5%+0.5%F.S.
10k-100kHz
1Hz
0.1%reading
Via voltage/current input
5% ~ 95%F.S.
1V for voltage / 0.1A for current
5mS
ORDERING INFORMATION
30Vpk~1500Vpk
10k-100kHz
0.8%+0.5%F.S.
1Vpk~50Vpk
10k-100kHz
0.8%
General Purpose
Test Instruments
30Vpk~1500Vpk
10k-100kHz
0.5%
Electrical Safety
Test Instruments
1Vpk~50Vpk
10k-100kHz
1%+0.5%F.S.
8495 : Electronic Ballast ATS
A849008 : Control Unit
84951 : Ballast Measurement Card
84903 : Control Card
A849501 : Ballast Tester
A849502 : Ballast Fixture Box
Digital Power Meter : Refer to Model 66200 Series
AC Source : Refer to Model 6500, 61500, 61600 Series
19" Rack
Ballast Measurement Card
PXI Instruments
& Systems
10mApk~5Apk
10k-100kHz
1.5%
Control Card
All specifications are subject to change without notice.
Passive Component
Test Instruments
A849501
8
Power Supply
Test Equipment
Ballast Tester
No. of channel
AC+DC Mode
Vac measurement (Lamp)
Range
Bandwidth
Accuracy
Vac measurement (Filament)
Range
Bandwidth
Accuracy
AC Only Mode
Vac measurement (Lamp)
Range
Bandwidth
Accuracy
Vac measurement (Filament)
Range
Bandwidth
Accuracy
Iac measurement
Range
Bandwidth
Accuracy
1mS
5mS
16sec
<10mS
PCI
1 Slot width
Optical Inspection
Equipment
Externalx1 and Vmeasurement input and Imeasurement input
Video & Color
Test Equipment
V range x I range
14bits
1%+0.2%F.S.
LCD/LCM
Test Equipment
3~2A/2~1A/1~0.5A/0.5~0.25A/0.25~0.125A/0.125~0.06A
14bits
1%+0.2%F.S.
LED
Test Equipment
30~20V/20~10V/10~5V
14bits
1%+0.2%F.S.
Control Card
84903
BL control
DC level control
Program level
0 ~ 10V
Resolution
11 bits
Level Accuracy
0.5 % setting + 0.1 % F.S.
Sourcing current
20mA
PWM control
Program level
0 ~ 10V
Resolution
7 bits
Accuracy
2 % + 1 % F.S (No Load) / 5.5% +1% F.S. (20mA output)
Sourcing current
20mA
Frequency
20Hz ~ 10kHz / 10kHz ~ 100kHz
Freq. Resolution
1Hz
Freq. Accuracy
0.1% (10kHz) / 1% (100kHz)
Duty
0 % ~ 100 % (10kHz) / 5% ~ 95% (100kHz)
Duty Resolution
1%
Duty Accuracy
Error Max : 100nS
SMBus control
DC Output
5V
SM DATA
Bidirectional
SM CLK
Bidirectional
BLI measurement (DC)
Range
0 ~ 20mA
Resolution
15 bits
Accuracy
0.1% reading + 1% F.S.
Analog output (Enable V and Vsave1, 2)
Channel
No. of channel
1 for Enable 2 for Vsave
DC level output
Program level
0 ~ 10V
Resolution
11 bits
Level Accuracy
0.5 % setting + 0.1 % F.S.
Sourcing current
20mA
Analog I measurement (Idc)
Range
0 ~ 20mA
Resolution
15 bits
Accuracy
0.1% reading + 1% F.S.
Digital I/O
No. of channel
12 bits For Output 4 bits For Input
Output type
Open collector
Measurement speed
< 30mS
Interface
PCI
Dimension
1 Slot width
Semiconductor/IC
Test Equipment
Vac measurement
Vrms measurement (Lamp)
Range
Mode
Resolution
Accuracy
Vac measurement (Filament)
Range
Resolution
Accuracy
Vpk+/Vpk-/Vpp measurement
Range
Resolution
Accuracy
Iac measurement
Irms measurement
Range
Resolution
Accuracy
Pac measurement
Range
Resolution
Accuracy
Frequency measurement
Range
Resolution
Accuracy
Input
Timing measurement
Trigger input
Trigger level
Range
Resolution
Accuracy
Timing measure
Resolution
Accuracy
Timing range
Measurement speed
Interface
Dimension
Solar Cell
Test Equipment
SPECIFICATIONS-2
11-64
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement