technical specification
TECHNICAL SPECIFICATION
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
1 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
TECHNICAL SPECIFICATION
Covid’s DisplayPort 1.2a Active optical cable enables users to experience a Plug-and-Play, uncompressed interconnect
for distributing DisplayPort signals much further then conventional reach of copper cables. This 4K UHD miniature
active fiber optic cable supports up to 100 meters (328 feet). Users are able to enjoy the state-of-the-art advances in
DisplayPort technologies at the industries highest resolutions including (3840x2160 & 4096x2160).
This DisplaPort cable is thin (0.15inches) and lightweight (0.4lbs/33ft) offering a robust 500N pulling and crush load
strength. It employs a hybrid topology where 4 strands of multimode optical fibers carry the TMDS payload and the 6
strands of 28AWG insulated copper wires work with powering the cable prior to hardware handshake operations such
as DPCD, HDCP and EDID.
The cable jacket option covers all US and EU flame-retardant requirements with low smoke halogen-free and CMP-OF
Plenum cable jacket.
These optical fiber cables offer benefits over conventional copper cables by reducing the risk of EMI and RFI
degradation for stable performance when used in typically high interference environments wherever high resolution and
24/7 operation for displays are mandatory.
No external power is required since the cable is electronically designed to draw the current from the source device
when the cable is interconnected with source and display devices.
Note: These cables are recommended for point-to-point application use. Please do not use with wall plate applications.
Features
• Supports Resolutions up to 4K/60Hz (3840x2160 & 4096x2160)
• Supports up to 21.6Gbps data rate with 5.4Gbps/lane (HBR2) link rate
• Extends DisplayPort stream up to 100m (328 feet)
• Supports up to 8 channels of 16 or 24bits linear PCM & 32 to 192KHz sampling rate
• Bi-directional hardware handshake with voltage assertion for HDCP, EDID and DPCP
• Complies with international flame-retardant standards (IEC with low smoke halogen-free, UL with CMP-OF Plenum)
• Plug & Play
• High Pulling Strength & Compression Load
• Low Power Consumption
Applications
• Professional AV System Interconnection
• In & Outdoor Digital Signage Panels & Kiosks
• Home Theater Systems
• Facility Automation Systems
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
2 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
TECHNICAL SPECIFICATION
Absolute Maximum Ratings
Parameter
Symbol
Min.
Supply Voltage
VCC
Storage Temperature
Relative Humidity
Max
Unit
-0.3
3.3
V
Tstg
-30
70
°C
RH
5
85
%
Conducted Emission & Radiated Emission
Typ.
B
Class
Recommended Characteristics
Parameter
1
Symbol
Min.
Typ.
Max
Unit
Supply Voltage1
VCC
3
3.3
3.6
V
Operating Temperature
TOP
0
50
°C
Symbol
Min.
Max
Unit
Operating Current
IOP
33
mA
Power Consumption
PO
0.11
W
Differential Input Voltage
VID
200
1400
mV
Differential Output Voltage
VOD
180
330
mV
250
5400
Mbps
All power supplied from Source PWR 20pin.
Electric Characteristics
Parameter
Lane Data Bit Rate
Typ.
Physical Characteristics
Parameter
Cable Dimensions (WXH)
Cable Color
Optical Fiber
Copper Wire
Cable Jacket Material
Connector Pull Strength
Compression Load Resistance
Minimum Bending Radius
Case Material
Value
3.4mm (±0.2mm)
Gray
Multi-mode fiber
28 AWG
CMP-OF (UL) & LSZH & TPU
10
50
6
ABS (Acrylonitrile-Butadiene-Styrene)
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
3 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
Unit
mm
Kg
Kg
mm
-
TECHNICAL SPECIFICATION
Product Dimensions
Unit of Measure (mm)
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
4 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
TECHNICAL SPECIFICATION
Physical Characteristics
Pin
1
2
3
4
5
6
7
8
9
10
Symbol
Lane0+
GND
Lane0Lane1+
GND
Lane1Lane2+
GND
Lane2Lane3+
Link 0 lane positive
Ground
Link 0 lane negative
Link 1 lane positive
Ground
Link 1 lane negative
Link 2 lane positive
Ground
Link 2 lane negative
Link 3 lane positive
Pin
11
12
13
14
15
16
17
18
19
20
Symbol
GND
Lane3CFG1
CFG2
AUX+
GND
AUXHP
RTN
PWR
Ground
Link 3 Lane negative
Config1(Ground)
Config2(Ground)
Aux channel positive
Ground
Aux channel negative
Hot Plug
Return
DC +3.3V*
*Source and Display are not connected.
Product Installation Diagram
1. Plug in Tx Connector labeled “SOURCE” to DisplayPort port of source device like PC or Source device.
2. Plug in Rx Connector labeled “DISPLAY” to DisplayPort port of display device like a monitor or TV.
3. Follow the same process to connect other SOURCE and DISPLAY devices.
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
5 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
TECHNICAL SPECIFICATION
Ordering Information
Cable Length Index
Length
32ft.
49ft.
98ft.
164ft.
196ft.
262ft.
328ft.
Code
32
49
98
164
196
262
328
Product Labeling
Safety Labels
Active Optical DisplayPort Cable
Part Number:
P-DPFH-XX
Revision Number:
Date:
Page Number:
1
8-15-2017
7 of 6
1723 W. 4th Street Tempe Arizona 85281
P: 800.638.6104 | F: 480.966.6728 | E: sales@covid.com www.covid.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising