Integrated Sound Systems
•
Line array systems
•
Speaker systems
•
Subwoofer
•
Monitor
•
Integrated sound systems
•
Digital loudspeaker management
•
Power amplifier
•
Accessories
•
Variable curvature line array
•
Constant curvature line array
•
Column line array
•
Point source
•
Subwoofer
•
Monitor
•
Digital
loudspeaker management
•
Power amplifier
•
Accessories
•
Security and Emergency systems
EN 54-16
•
Conference systems
& Intercom systems
•
Microphones
•
Preamplifier equipment
•
Control
equipment
•
Power amplifiers
•
Integrated amplifiers
•
Music
sources
•
Ceiling speakers
•
Sound
projectors
•
EN 54-24 speakers
•
Spherical diffusers
•
Speaker
systems
•
Column speakers
•
Weatherproof speakers
5
Ventis
11
X-PRO
X-SUB
SPEAKER
115A
700+200W RMS
133dB SPL
115
500W RMS
130dB SPL
MONITOR
115MA
1400W RMS
133dB SPL
115M
500W RMS
133dB SPL
SPEAKER
215A
1600W RMS
132dB SPL
215
800W RMS
132dB SPL
SUB
18SA
1200W RMS
136dB SPL
112A
700+100W RMS
133dB SPL
112
400W RMS
132dB SPL
112MA
1400W RMS
133dB SPL
112M
500W RMS
126dB SPL
15A
1000W RMS
128dB SPL
15
400W RMS
126dB SPL
15SA
1200W RMS
136dB SPL
19
Vertus
ARRAY
CLA 604A
400+100W RMS
125dB SPL
CLA 208SA
600W RMS
129dB SPL
110A
700+100W RMS
131dB SPL
110
300W RMS
127dB SPL
108A
700+200W RMS
131dB SPL
108
250W RMS
126dB SPL
12A
1000W RMS
127dB SPL
12
300W RMS
125dB SPL
10A
1000W RMS
126dB SPL
10
250W RMS
123dB SPL
CS1000
600+400W RMS
129dB SPL
206A
700+100W RMS
131dB SPL
206
400W RMS
127dB SPL
27
Subline
SUB
218SA
1200W RMS
143dB SPL
218S
1200W RMS
143dB SPL
31
StageMaxX
MONITOR
12MA
400+100W RMS
130dB SPL
118SA
1200W RMS
137dB SPL
118S
1200W RMS
136dB SPL
35
HiMaxX
SPEAKER
60A
1100+250W RMS
134dB SPL
60
700W RMS
132dB SPL
40A
1000+250W RMS
133dB SPL
40
500W RMS
131dB SPL
115SA
600W RMS
135dB SPL
112SA
600W RMS
135dB SPL
SUB
100SA
1200W RMS
139dB SPL
43
ProMaxX
SPEAKER
114A
700+200W RMS
135,5dB SPL
114
700W RMS
132dB SPL
49
Evo
2
MaxX
SPEAKER
6A
400+100W RMS
130dB SPL
6
400W RMS
130dB SPL
55
J
SPEAKER
15A
350+100W RMS
129dB SPL
15
300W RMS
127dB SPL
61
X-LITE
SPEAKER
15A
1000W RMS
128dB SPL
15
400W RMS
126dB SPL
67
Amico
INTEGRATED
SOUND SYSTEMS
12A
350+50W RMS
128dB SPL
12
300W RMS
127dB SPL
12A
1000W RMS
127dB SPL
12
300W RMS
125dB SPL
112A
700+200W RMS
133dB SPL
112
400W RMS
129dB SPL
4A
400+100W RMS
130dB SPL
4
300W RMS
128dB SPL
10USB
500+2x150W RMS
130dB SPL
110A
700+200W RMS
131dB SPL
110
300W RMS
127dB SPL
2A
400+100W RMS
128dB SPL
2
250W RMS
125dB SPL
8A
200+50W RMS
124dB SPL
8
160W RMS
121,5dB SPL
10A
1000W RMS
126dB SPL
10
300W RMS
125dB SPL
5A
80+40W RMS
117dB SPL
5
80W RMS
117dB SPL
SUB
15SA
1100+250W RMS
134dB SPL
SUB
9SA
600W RMS
132dB SPL
5T
50W RMS
114dB SPL
71
AX Series
POWER AMPLIFIERS
AX 3000 AX 2000 AX 1200 AX 800
72
DMM 8008
DIGITAL MATRIX
DMM8008
74
DLM26
DIGITAL LOUDSPEAKER
MANAGEMENT
DLM 26
76
Accessories
HISTORY, EXPERIENCE
AND INNOVATION
IN TRADITION.
MADE IN ITALY.
Since 1963, FBT designs and builds sound in Recanati, a small city located in the centre of Italy, a city of Poetry, of Art, of Music, from immemorial time the soundtrack for entire generations.
IN FBT EVERY DEPARTMENT
IS A COMPANY
IN THE COMPANY
WHOSE AIM IS TO MAKE
QUALITY WITHIN
THE ENERGY OF SOUND.
A technological know-how that extends from research to planning, from electronics to design, from wood to metal, from plastics to painting.A highly innovative product and a manufacturing process determined by a strict final electronic testing.
SPEAKER
SYSTEM
5
Ventis
THE VENTIS RANGE FROM FBT COMPRISES
FIVE VERSATILE LOUDSPEAKER ENCLOSURES
FOR EITHER PORTABLE USE OR FIXED
INSTALLATION
VENTIS 115A
700+200W
VENTIS 115
500W
VENTIS 112A
700+200W
VENTIS 112
400W
VENTIS 110A
700+200W
VENTIS 110
300W
6
Available in either passive or bi-amplified versions, each of the models - the VENTIS
115, 112, 110, 108 and 206 - has been designed to meet the highest standards in both performance and aesthetic appeal.
For the VENTIS range, quality and flexibility are the watchwords. Based on a powerful combination of B&C compression drivers and FBT’s own custom, long excursion woofers, the 115, 112, 110 and 108 models are two-way, bass reflex designs housed in 15mm birch plywood. A full-grille design backed by specially treated acoustic cloth delivers the characteristic style for which FBT is known, while fully rotatable constant directivity horns ensure accurate coverage.
The five enclosures are as suitable for fixed installation as they are for use
on the stage. M10 points are included as standard while an optional U-bracket can be used for wall-mounting. For use on the road, the VENTIS models include aluminum handles with rubber inserts, a 35mm polemount socket, and a 45° sloped profile for unobtrusive placement on-stage as a monitor.
Meanwhile the multi-purpose VENTIS 206 can
be deployed as a front fill, an under-balcony fill, as a main providing pristine speech intelligibility or simply as the full-range
companion of a subwoofer. Constructed in
12mm birch plywood, the 206 has an integrated rear handle, an optional mounting bracket and, most importantly, an astonishing size to SPL ratio.
The new coaxial monitors in bass reflex Ventis
112MA and Ventis 115MA expand the active and passive range of the series. Thanks to the
B&C custom transducers they are capable of a
132dB SPL. The two enclosures are built with a 15mm birch plywood and they can also be used for fixed installation and FOH thanks to
35mm pole mount socket and to the inserts for optional mounting bracket.
VENTIS 108A
700+200W
VENTIS 108
250W
VENTIS 206A
700+200W
VENTIS 206
400W
VENTIS 115MA
1400W
VENTIS 115M
500W
VENTIS 112MA
1400W
VENTIS 112M
500W
Designed to meet the highest standards in both performance and aesthetic appeal
7
Power for the active VENTIS models comes courtesy of a specially designed, Italian made switching mode amplifier module. Low frequencies are driven by a highly efficient 700W
RMS (full bridge) Class-D topology, operating with extremely low THD. For the HF stage, a 200W RMS performance is delivered via a meticulously crafted Class-H / AB design.
Finally, DSP on-board the VENTIS enclosures is both user friendly and powerful. Located on the rear of each enclosure, a menu-driven system is navigated via a single rotary control with pushto-select functionality. A total of 6 pre-optimised settings are available (see below), plus 2 further slots for users to form their own designs, using
5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes,
MAX-SPL or MAX-QUALITY, to best suit their performance.
The VENTIS Presets
The FBT VENTIS range offers powerful DSP with 6 versatile presets. Crafted by expert FBT engineers, the presets offer a performance for every requirement.
ORIGINAL / LIVE The renowned, smooth FBT sound
VOCAL A special EQ setting to maximise speech intelligibility
DJ Designed to keep the energy high and your audience dancing
TOURING The reliability and the roar of the industry’s most popular touring systems
LOUDNESS The ultimate preset for listening at a medium or low volume
WARM A special setting to emphasise full-bodied, low-mid frequencies.
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS
LF and 200W RMS HF power amplifiers in
Class D for LF and in
Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
Ventis 115A
Processed Active Speaker
700W + 200W RMS - 133dB SPL
•
380mm (15”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT
•
25mm (1”) exit throat B&C HF compression driver with
44mm (1.7”) voice coil
• Frequency response from
42Hz to 20KHz
•
80°H x 50°V Constant Directivity rotatable
Horn
• 6 x M10 suspension points, wall bracket mount thread, 35 mm (1 3/8”) top-hat speaker stand socket, two aluminium handles
• 45° monitor taper
Ventis 112A
Processed Active Speaker
700W + 100W RMS - 133dB SPL
•
320mm (12”) LF woofer with 64mm (2.5”) voice coil, custom made for FBT
•
25mm (1”) exit throat B&C HF compression driver with
36mm (1.4”) voice coil
• Frequency response from
48Hz to 20 kHz
•
80°H x 50°V Constant Directivity Rotatable
Horn
• 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• Speaker stand socket, two aluminium handles
• 45° monitor taper
Ventis 115
Passive reinforcement speaker
500W/8ohm - 130dB SPL
Ventis 112
Passive reinforcement speaker
400W/8ohm RMS - 129dB SPL
Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
Ventis 110A
Processed Active Speaker
700W + 100W RMS - 131dB SPL
•
250mm (10”) LF woofer with 50mm (2”) voice coil, custom made for FBT
•
25mm (1”) exit throat B&C HF compression driver with
36mm (1.4”) voice coil
• Frequency response from
58Hz to 20 kHz
•
80°H x 50°V Constant Directivity Rotatable
Horn
• 6 x M10 suspension points, optional wall bracket mount thread, 35mm (1 3/8”) top-hat
• Speaker stand socket, one aluminium handle
• 45° monitor taper
Ventis 108A
Processed Active Speaker
700W + 200W RMS - 131dB SPL
• 2-way bi-amplified, bass-reflex design
•
200mm (8”) LF woofer with 50mm (2”) voice coil, custom made for FBT
•
25mm (1”) exit throat B&C HF compression driver with
36mm (1.4”) voice coil
• Frequency response from
65Hz to 20 kHz
•
80°H x 50°V Constant Directivity Rotatable
Horn
• Optional wall bracket mount thread, 35mm (1
3/8”) top-hat
• One integrated pocket handle
Ventis 110
Sound Reinforcement Monitor
300W/8ohm RMS - 127dB SPL
Ventis 108
Passive
Reinforcement Speaker
250W/8ohm RMS
126dB SPL
•
4 x M5 threaded rigging points and optional mounting hardware
9
2-way, bi-amplified, bass reflex design
Biamped: 700W RMS
LF and 200W RMS HF power amplifiers in
Class D for LF and in
Class H/AB for HF
Digital Signal Processor with graphic display
15 mm (0.59”) birch plywood scratch resistant enclosure and internal bracing
High efficiency switch mode power supply
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
Ventis 206A
Processed Active Speaker
700W + 100W RMS - 131dB SPL
•
2x165mm (6.5”) LF woofer with 38mm
(1.5”) voice coil, custom made for FBT
•
25mm (1”) exit throat B&C HF compression driver with 36mm (1.4”) voice coil
• Frequency response from
70Hz to 20 kHz
•
70°H x 50°V Constant Directivity Rotatable
Horn
• Optional wall bracket mount thread, 35mm
(1 3/8”) top-hat
• One integrated handle
• 12mm (0.47”) birch plywood scratch resistant enclosure and internal bracing
Ventis 206
Sound Reinforcement Monitor
400W/8ohm RMS - 127dB SPL
Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
Ventis 115MA
Processed Active Monitor
700W + 200W RMS - 132dB SPL
Ventis 112MA
Processed Active Monitor
700W + 200W RMS - 132dB SPL
• 2-way bi-amplified, bass-reflex design
•
380 mm (15”) coaxial custom woofer with 64
mm (2.5’’) voice coil, 25mm (1”) exit throat
B&C with 44mm (1.7”) voice coil
• Frequency response from 50Hz to 20kHz
• DSP with 6 factory presets (ORIG, HI-CUT/
DRUM-FILL, LO-CUT/DOUBLE, FOH, VOCAL,
TOURING)
•
90° conical dispersion
•
35 mm (1.38’’) stand socket, two integrated handles and optional wall mount bracket
• 2-way bi-amplified, bass-reflex design
•
320 mm (12”) coaxial custom woofer with 64
mm (2.5’’) voice coil, 25mm (1”) exit throat
B&C with 44mm (1.7”) voice coil
• Frequency response from 55Hz to 20kHz
• DSP with 6 factory presets (ORIG, HI-CUT/
DRUM-FILL, LO-CUT/DOUBLE, FOH, VOCAL,
TOURING)
•
90° conical dispersion
•
35 mm (1.38’’) stand socket, two integrated handles and optional wall mount bracket
Ventis 115M
Passive Reinforcement Monitor
500W/8ohm RMS - 130dB SPL
Ventis 112M
Passive Reinforcement Monitor
500W/8ohm RMS - 129dB SPL
11
Model
Configuration
Built-in amplifier max. rms LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
AC Power requirements
Input connectors
Power cord
AC Power connector
Net dimensions
(WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power *
Short term power (IEC 268-5) **
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak
Dispersion
Crossover frequency
Recommended HP filter
Recommended external DSP
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Accessories page 76
Nylon cover
Wall metal bracket to mount in horizontal position
Directional wall mount bracket
Ventis 115A Ventis 112A Ventis 110A Ventis 108A Ventis 206A Ventis 115MA Ventis 112MA
way 2
W 700/200
2
700/200
2
700/200
2
700/200
2
700/200
2
700/200
2
700/200
W 1400/400 1400/400 1400/400 1400/400 1400/400 1400/400 1400/400
@-6dB 42Hz - 20KHz 48Hz - 20KHz 58Hz - 20KHz 65Hz - 20KHz 70Hz - 20KHz 50Hz - 20KHz 55Hz - 20KHz
12 - 2.5 coil 10 - 2 coil 8 - 2 coil 2x6.5 - 1.5 coil 15 - 2.5 coil 12 - 2.5 coil inch 15 - 2.5 coil inch 1 - 1.7 coil dB 127 / 133
1 - 1.4 coil
126 / 133
80° x 50° rotatable
22
1 - 1.4 coil
124 / 131
80° x 50° rotatable
22
1 - 1.4 coil
123 / 131
80° x 50° rotatable
22
1 - 1.7 coil
126 / 133
90° kOhm 22
VA 640
XLR with loop,
RCA ST m/ft 5/16.4
mm inch
Neutrik
POWERCON
TRUE1
427x765x420
16.81x30.11x16.53
kg/lb 25/55.11
mm inch
600x865x520
23.62x34.05x20.47
kg/lb 29/63.93
640
XLR with loop,
RCA ST
5/16.4
Neutrik
POWERCON
TRUE1
387x665x380
12.23x26.18x14.96
20.6/45.41
500x765x470
19.68x30.11x18.50
23.1/50.92
640
XLR with loop,
RCA ST
5/16.4
Neutrik
POWERCON
TRUE1
329x575x325
12.95x22.63x12.79
15.6/34.39
420x675x400
16.53x26.57x15.74
18.1/39.90
640
XLR with loop,
RCA ST
5/16.4
Neutrik
POWERCON
TRUE1
274x500x300
10.8x19.7x11.8
13.3/29.3
395x620x375
15.5x24.4x14.7
15.3/33.7
1 - 1.4 coil
124 / 131
70° x 50° rotatable
22
1 - 1.7 coil
127 / 133
90°
640
XLR with loop,
RCA ST
5/16.4
Neutrik
POWERCON
TRUE1
190x560x260
7.48x22.04x10.23
12/26.45
290x660x360
11.41x25.98x14.17
14.3/31.52
22
640
XLR with loop,
RCA ST
5
Neutrik
POWERCON
TRUE1
632x354x516
24.9x11.9x20.3
21.3/46.9
732x454x616
28.8x17.9x24.2
25.8/56.9
22
640
XLR with loop,
RCA ST
5
Neutrik
POWERCON
TRUE1
563x311x452
22.2x12.2x17.8
17.5/38.6
663x411x552
26.1x16.2x21.7
22/48.5
Ventis 115
way 2
W rms 500
W 250
W 1000
Ventis 112
2
400
200
800
Ventis 110
2
300
150
600
Ventis 108
2
250
125
500
Ventis 206
2
400
200
800
Ventis 115M Ventis 112M
2
500
250
1000
2
500
250
1000
Ohm 8 8 8 8 8 8 8
@-6dB 50Hz - 18KHz 55Hz - 18KHz 60Hz - 18KHz 70Hz - 18KHz 75Hz - 20KHz 55Hz - 18KHz 60Hz - 18KHz inch 15 - 2.5 coil inch 1 - 1.7 coil
12 - 2.5 coil
1 - 1.4 coil
10 - 2 coil
1 - 1.4 coil
8 - 2 coil
1 - 1.4 coil
2x6.5 - 1.5 coil
1 - 1.4 coil
15 - 2.5 coil
1 - 1.7 coil
12 - 2.5 coil
1 - 1.7 coil dB 99 dB 126 / 130 kHz 1.4
98
125 / 129
80° x 50° rotatable
1.6
97
122 / 127
80° x 50° rotatable
1.8
95
120 / 126
80° x 50° rotatable
1.8
97
123 / 127
70° x 50° rotatable
2
99
126 / 130
90°
1.4
98
125 / 129
90°
1.6
40Hz - 24db/oct 45Hz - 24db/oct 50Hz - 24db/oct 50Hz - 12-24db/oct 60Hz - 24db/oct 50Hz - 12-24db/oct 50Hz - 12-24db/oct
FBT DLM26
2 x SPEAKON mm inch
427x765x420
16.81x30.11x16.53
kg/lb 24.5/54.01
mm inch
600x865x520
23.62x34.05x20.47
kg/lb 28.5/2.83
FBT DLM26
2 x SPEAKON
387x665x380
12.23x26.18x14.96
20.1/44.31
500x765x470
19.68x30.11x18.50
22.6/49.82
FBT DLM26
2 x SPEAKON
329x575x325
12.95x22.63x12.79
15.1/33.28
420x675x400
16.53x26.57x15.74
17.6/38.80
FBT DLM26
2 x SPEAKON
274x500x300
10.8x19.7x11.8
12.3/27.1
395x620x375
15.5x24.4x14.7
14.3/31.5
FBT DLM26
2 x SPEAKON
190x560x260
7.48x22.04x10.23
11.8/26.01
290x660x360
11.41x25.98x14.17
13.8/30.42
FBT DLM26
2 x SPEAKON
632x354x516
24.9x11.9x20.3
20.3/44.7
732x454x616
28.8x17.9x24.2
24.8/54.7
FBT DLM26
2 x SPEAKON
563x311x452
22.2x12.2x17.8
16.5/36.4
663x411x552
26.1x16.2x21.7
21/46.3
Ventis 115 Ventis 112 Ventis 110 Ventis 108A Ventis 108 Ventis 206 Ventis 115M Ventis 112M
VN-C 115
40720
VN-U 115
40724
VN-C 112
40721
VN-U 112
40725
VN-C 110
40722
VN-U 110
40726
VN-C 108A
41204
VN-U 108
41220
VN-C 108
41205
VN-U 108
41220
AC-W 568/W
41207
37330 Bianco
VN-C 206
40723
VN-U 206
40727
VN-C 115M
41207
VN-C 112M
41206
SPEAKER
SYSTEM
13
X-PRO
X-SUB
14
X-PRO
AND X-SUB
AIM FOR
SUCCESS!
No matter whether you’re performing on stage, delivering a business presentation or designing the highest quality fixed installation, you want to leave an indelible mark on your audience.
That’s when FBT’s new X-PRO series of powered speakers can help you make a difference.
Constructed out of plywood enclosures finished with extra-texture paint, the X-PRO series is cut to withstand tour-tough conditions with
Italian elegance and style. Professional features include ergonomic handles, M10 flying points, a monitor taper design, and a full protective grille.
Meanwhile the onboard Class D amplifier module delivers an amazing 1000W power with a flexible DSP to allow personal EQ adjustments, while the low frequency response can be extended courtesy of the dedicated X-SUB 18”
AND 15” powered subwoofers.Now the range, which already includes both active and passive
10”, 12” and single 15” models, has been expanded with the bi-amplified X-PRO 215A, a two-way bi-amplified system rated at 1600W
(Class D) + 200W (Class AB) to deliver 129 /
132dB SPL.
Designed as the perfect partner for the X-LITE and X-PRO series,
FBT introduces the new X-SUB
15SA powered subwoofer.
Loaded with a single 15” heavy duty woofer, the X-SUB 15SA is controlled by a 1200W Class D amplifier with DSP at 6 presets allowing perfect tailoring of the extended low frequency to the midhigh.
The rugged plywood enclosure is built to withstand touring conditions, yet crafted with Italian style to suit the most elegant fixed installations. Finally, the M20 thread allows for pole mounting on a 3-way system design.
Handles, M10 rigging points for suspended installation, 35mm stand socket and 35° or 45° monitor taper, all included to make the speaker adaptable to any application
X-PRO 215A
1600W
X-PRO 215
800W
X-PRO 15A
1000W
X-PRO 15
400W
X-PRO 12A
1000W
X-PRO 12
300W
X-PRO 10A
1000W
X-PRO 10
250W
X-SUB 18SA
1200W
X-SUB 15SA
1200W
X-PRO and X-SUB The professional’s choice
X-PRO Series common features
• Plywood cabinet with anti-scratch coating and an internal ply reinforcement
• Custom FBT Speakers with high linear excursion capability and efficiency
• Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
• 1000W, 2-channel amplifier in Class D for LF
and in Class AB for HF with a high dynamics response for a pleasant sound at high volume
• Universal switching mode power supply 100-
240VAC
• DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
• Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high
SPL performance
• Control panel with XLR input and link out,
6.3mm jack stereo input with volume, stereo
RCA input with volume, XLR output selector coupled with stereo / mono, HP filter on / off, mic / line, DSP preset selector
• Integrated mixer with two stereo channels, one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
• Constant directivity horn which can be rotated to vary the speaker’s angle of coverage
The presence of 4 presets managed by
DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
• ORIGINAL / LIVE: The ideal preset for live sound reinforcement
• FLOOR / VOCAL: A preset to transform your X-PRO cabinet for use as a stage monitor or for vocals
• CLUB: A special preset to deliver a rich, deep bass response that stays easy on listener’s ears
•
DJ: A preset designed to bring out the best in electronic dance music
Monitor 35°
15
X-PRO 215A
Processed Active Speaker
1600 + 200W RMS - 129/132dB SPL
• 2-way bi-amplified bass reflex
•
2 x 380mm (15”) LF woofer with
64mm (2.5”) voice coil
•
25mm (1”) throat /35mm (1.4”) voice coil HF compression driver
• 42Hz to 20KHz Frequency Response
•
1600W amplifier in Class D for LF and 200W in Class AB for HF with an high dynamics response for a pleasant sound at high volume
•
80° H x 50° V constant directivity rotatable horn
X-PRO 215
Passive Reinforcement Speaker
800W/8ohm RMS - 132dB SPL
X-PRO 15A
Processed Active Speaker
1000W RMS - 128dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 380mm (15”) LF woofer with 64mm (2.5”) voice coil
• FBT 25mm (1”) throat /35mm
(1.4”) voice coil HF compression driver
• 42Hz to 20KHz Frequency Response
•
80° H x 50° V constant directivity rotatable horn
•
35° or 45° monitor taper
X-PRO 15
Passive Reinforcement Speaker
400W/8ohm RMS - 126dB SPL
X-PRO 12A
Processed Active Speaker
1000W RMS - 127dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 320mm (12”) LF woofer with 50mm (2”) voice coil
• FBT 25mm (1”) throat /35mm
(1.4”) voice coil HF compression driver
• 50Hz to 20KHz Frequency Response
•
80° H x 50° V constant directivity rotatable horn
•
35° monitor taper
X-PRO 12
Passive Reinforcement Speaker
300W/8ohm RMS - 125dB SPL
X-PRO 10A
Processed Active Speaker
1000W RMS - 126dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 250mm (10”) LF woofer with 50mm (2”) voice coil
• FBT 25mm (1”) throat /35mm
(1.4”) voice coil HF compression driver
• 58Hz to 20KHz Frequency Response
•
80° H x 50° V constant directivity rotatable horn
•
35° monitor taper
X-PRO 10
Passive Reinforcement Speaker
250W/8ohm RMS - 123dB SPL
X-SUB 18SA
Processed Active Subwoofer
1200W RMS - 136dB SPL
X-SUB 15SA
Processed Active Subwoofer
1200W RMS - 131/135dB SPL
• Compact band-pass design subwoofer with high SPL and punch
•
460mm (18”) high excursion woofer with 75mm (3”) voice coil
• Frequency response from 38Hz to
120Hz
•
1200W RMS Class D power amplifier with switch mode supply
• Digital Signal processor with
6 presets, 2 equalization with 2 LPF crossover settings
• Control panel with stereo combo XLR/
Jack in/outs, Stereo XLR HP-Filter outs,
Volume, EQ presets, phase reversal switch 0°-180°, status LED indicators
•
18mm plywood cabinet with scratch
& scuff resistant paint finish
• M20 (20mm) top mount speaker stand socket, two FBT design aluminum handles, 100 mm
optional wheels
• Provides additional low frequency reinforcement when used along with
X-PRO or X-LITE
• Compact bass reflex design subwoofer with high SPL and punch
•
380mm (15”) high excursion woofer with 75 mm (3”) voice coil
• Frequency response from
42Hz to 120Hz
•
1200W Class D power amplifier with switch mode supply
• Digital Signal processor with
6 presets, 2 equalization with 2 LPF crossover settings
• Control panel with stereo combo XLR/
Jack in/outs, Stereo XLR HP-Filter outs,
Volume, EQ presets, phase reversal switch 0°-180°, status LED indicators
• 15mm plywood cabinet with scratch & scuff resistant paint finish
• M20 (20mm) top mount speaker stand socket, two FBT design aluminum handles, 100mm
optional wheels
• Provides additional low frequency reinforcement when used along with
X-PRO or X-LITE speaker series
17
Model
Configuration
Built-in amplifier max LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL peak
Dispersion
Input impedance
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
X-PRO 215A X-PRO 15A X-PRO 12A X-PRO 10A X-SUB 18SA X-SUB 15SA
way 2
W 1600/200
@-6dB 42Hz - 20KHz inch 2 x 15 - 2.5 coil
2
800/200
42Hz - 20KHz
15 - 2.5 coil
2
800/200
50Hz - 20KHz
12 - 2 coil
2
800/200
58Hz - 20KHz
10 - 2 coil
1
1200
38Hz - 120Hz
18 - 3 coil
1
1200
42Hz - 120Hz
15 - 3 coil inch 1 - 1.4 coil dB 129 / 132
1 - 1.4 coil
123 / 128
1 - 1.4 coil
122 / 127
1 - 1.4 coil
121 / 126
-
132 / 136 half space
-
131 / 135 half space kOhm 22
XLR with loop, Jack
ST, RCA ST mm /inch 5 / 16.4
mm inch
437x1175x440
17.2x46.2x17.3
kg / lb 37 / 81.2
mm inch
537x1275x540
21.1x50.2x21.2
kg / lb 42 / 92.6
80° x 50° rotatable
22
XLR with loop,
Jack ST, RCA ST
80° x 50° rotatable
22
XLR with loop,
Jack ST, RCA ST
80° x 50° rotatable
22
XLR with loop,
Jack ST, RCA ST omni omni
22 22
XLR ST with loop, XLR
ST OUT
XLR ST with loop, XLR
ST OUT
5 / 16.4
440x735x440
17.32x28.93x17.32
5 / 16.4
370x640x370
14.56x25.19x14.56
5 / 16.4
315x550x315
12.40x21.65x12.40
5 / 16.4
510x666x650
20.07x26.22x25.59
5 / 16.4
455x586x570
17.9x23.1x22.4
20 / 44.1
535x810x535
21.06x31.88x21.06
24 / 52.9
16 / 35.3
465x715x465
18.30x28.14x18.30
19 / 41.9
12.5 / 27.5
410x625x410
16.14x24.60x16.14
15 / 33.1
34 / 74.95
600x740x740
23.62x29.13x29.13
37 / 81.57
30 / 66.1
555x686x670
21.8x27.0x26.4
35 / 77.2
Model
Configuration
Recommended amplifier
Long term power *
Short term power (IEC 268-5) **
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak
Dispersion
Crossover frequency
Recommended HP filter
Recommended external DSP
Input connectors
Net dimensions (WxHxD)
Net weight
Shipping dimensions(WxHxD)
X-PRO 215
way 2
W rms 800
X-PRO 15
2
400
X-PRO 12
2
300
X-PRO 10
2
250
W 400
W 1600
Ohm 4
@-6dB 50Hz - 20KHz inch 2 x 15 / 2.5 coil inch 1 / 1.4 coil dB 101
200
800
8
53Hz - 20KHz
15 / 2.5 coil
1 / 1.4 coil
98
150
600
8
56Hz - 20KHz
12 / 2 coil
1 / 1.4 coil
97
125
500
8
68Hz - 20KHz
10 / 2 coil
1 / 1.4 coil
96 dB 129 / 132 123 / 126 122 / 125 120 / 123
H x V 80°x50° rotatable 80°x50° rotatable 80°x50° rotatable 80°x50° rotatable kHz 1.8
HP40Hz
12-24db/oct
FBT DLM26
1.8
HP40Hz
12-24db/oct
FBT DLM26
2
HP 45Hz
12-24db/oct
FBT DLM26
2.5
HP 55Hz
12-24db/oct
FBT DLM26 mm inch
2 x SPEAKON
437x1175x440
17.2x46.2x17.3
kg / lb 36 / 79.4
mm inch
537x1275x540
21.1x50.2x21.2
2 x SPEAKON
440x735x440
17.32x28.93x17.32
2 x SPEAKON
370x640x370
14.56x25.19x14.56
2 x SPEAKON
315x550x315
12.40x21.65x12.40
20 / 44.1
535x810x535
21.06x31.88x21.06
16 / 35.3
465x715x465
18.30x28.14x18.30
12.5 / 27.5
410x625x410
16.14x24.60x16.14
Shipping weight kg / lb 42 / 92.6
24.5 / 54.01
19.3 / 42.5
* 100 hour power test, IEC 268-5 standard (display the long term RMS voltage handling, using IEC filtered 6db crest factor pink noise)
15 / 33.06
** Based on peak level of 6 db crest factor random noise signal used for test
Accessories page 76
Nylon cover
U bracket horizontal wall mount
Wheels kit
X-PRO 215A
XP-C 215
41234
X-PRO 15A
XP-C 15
39486
XP-U 15
38894
X-PRO 12A
XP-C 12
39487
XP-U 12
38893
X-PRO 10A
XP-C 10
39488
XP-U 10
38892
X-SUB
18SA
XS-C
18S
38895
X-SUB
18SA with wheels
XS-CH
18S
38896
X-SUB
15S
XS-C
15S
41233
X-SUB
15S with wheels
XS-CH
15S
41234
KW-X SUB
38899
LINE ARRAY
SYSTEM
19
Vertus
20
PROFESSIONAL
LINE ARRAY
VERTUS CLA was created with the thought of integrating professional line array
technology in an extremely compact and elegant speaker column.
Compared to the traditional two-way speakers, the sound is distributed much more evenly
throughout the audience, both in outdoor and in indoor environments acoustically difficult or reverberating as well. The CLA cylindrical wave front boasts the pleasant effect of present and precise forwardly projected sound. Even acoustic feedback towards microphones is reduced.
VERTUS CLA is a light and compact modular line array system created for both live and fixed installations, comprised by two products:
- CLA 604A: bi-amp two-way active column speakers 400 + 100W RMS
- CLA 208SA: active subwoofer 600W RMS
CLA 208SA is a 2 x 8” active subwoofer in
bass-reflex design and birch ply enclosure. The internal Class D amplifier delivers 600W and is matched with a switch mode power supply and a DSP processor with filtering functions, equalization and speaker protection. Created
with the idea of extending the CLA608A’s low frequency performance in live
applications, the CLA208SA serves as the base support for the CLA604A column speaker which can either be frontally mounted to the sub, as well as fixed upon the optional stand through the M20 socket on the upside of the sub.
The CLA208SA subwoofers are modular as well, and they can be stacked to enlarge and increase the maximum SPL.
Vertus CLA 604A
400+100W
Vertus CLA 208SA
600W
CLA604A is an extruded aluminum
column speaker fitted with 6 x 4” custom
woofers and 4 x 1” dome tweeters, each coupled to a wave guide. The internal Class D
amplification, 400W for woofers and 100W for tweeters with switch mode power supply and DSP processor with 4 equalization
presets provide unexpected dynamics in a system of these dimensions.
The rapid latching system with pins allows for the expansion of the system, doublingup CLA604A modules to form a unified column with an absolute and coherent source integration and increase of SPL and lowfrequency directivity control.
CLA 604A
3 x CLA 604A 2 x CLA 604A
CLA 604A
2 x CLA 604A
CLA 604A W
2 x CLA 604A
3 x CLA 604A
VT-SC 59 VT-SC 114 W
3 x CLA 208SA 2 x CLA 208SA
CLA 208SA
2 x CLA 208SA
CLA 208SA W
CLA system features:
• High-level sound quality from 50Hz to 20kHz expressly developed for live performance
• Long distance sound projection and better
SPL distribution towards the audience
• Great and dynamic power performance thanks to tri-amplification system
•
Lightweight and easy to carry
• Design and elegance for an easy integration even in the most demanding installations
• Very compact dimensions enable the listener to concentrate on sound and not on speakers!
•
High horizontal dispersion
The internal XLR signal link system and Neutrik
POWERCON power supply on both the sub and the satellite, allows for hiding wires
and cables from open sight, preserving the system’s clean aesthetics.
VERTUS CLA is a true professional line array
system that can satisfy the musician looking for a compact PA solution, easily to carry, modular, ready to use in just minutes with no-compromise quality. It is capable of being integrated
into any environment or installation requiring high-quality sound and controlled
directional characteristics.
The technology and quality of a professional line array in a compact column
21
Vertus is also available in white colour:
Vertus 604A W
Vertus 208SA W
Vertus CLA 604A
Column Active Line Array
400W + 100W RMS - 125dB SPL
• 2-way bi-amplified Line Array Column
•
6 x 100 mm (4”) custom woofer with
25 mm (1”) voice coil
•
4 x 25 mm (1”) neodymium dome tweeter on waveguide
• 130Hz to 20KHz frequency response
•
Class D 400W RMS amplifier for LF and
100W RMS for HF with switch mode power supply
•
DSP processor with 4 available equalization presets
• Control panel with volume, presets, HP filter,
Mic-Line, status LED
• XLR input and Neutrik POWERCON supply input at the lower part of the column; XLR link and Neutrik POWERCON loop output at the higher part, in order to hide each connection cable
•
100°H x 20°V dispersion
•
Extruded-aluminum power coated
cabinets. Superior latching system enables the extension of the length of the line array by adding CLA604A modules for increased modularity of the system
• Possibility to angle the columns of +/- 30° on a horizontal plane
• Ideal for both live applications, assisted by the
CLA 208SA active subwoofer, as well as for fixed installation
•
Easily expandable for a total power of
6600W (stereo system composed of 3 x CLA604A and 3 x CLA208SA)
• Very light and easy to carry
Vertus CLA 208SA
Processed Active Subwoofer
600W RMS - 129dB SPL
• Active subwoofer in bass-reflex design
•
2 x 200 mm (8”) custom neodymium,
high-excursion woofer with 50 mm (2”) voice coil
• 50Hz to 180Hz frequency response
•
Class D 600W RMS amplifier with switch mode power supply
•
DSP processor with 4 available presets
• Control panel with combo XLR/Jack stereo input and link, XLR Hi-pass out stereo, volume, presets, 0°-180° phase switch, status LED
•
Neutrik POWERCON input and link
•
15 mm birch plywood enclosure with anti-scratch paint finish, stackable
• M20 stand adapter, 2 integrated handles, front hardware to sustain CLA604A modules
• Suitable for low frequency extension and reinforcement of the CLA604A array, especially for live performance
23
24
VERTUS CS1000
Vertus CS 1000
600+400W
Created as a no-compromise choice for both live performers and installers, the
VERTUS CS1000 compact line array combines maximum performance with a modular, scalable approach
Its lightweight but sturdy construction blended with FBT’s distinctive engineering and elegance has delivered a system that can be deployed on stage within minutes, or discreetly integrated into the most delicate of decors to provide highquality sound and controlled directivity.
A bi-amplified design, the system comprises a long excursion 12” bass reflex subwoofer and a passive mounted satellite, linked via a Neutrik
SPEAKON connector and equipped with six fullrange neodymium 3” speakers. Onboard the subwoofer is a Class-D, two channel amplifier, complete with switch-mode power supply, delivering 600W RMS to the subwoofer and
400W RMS to the satellite, both of which are housed in birch plywood enclosures.
For ease of use, a storage compartment is provided within the subwoofer enclosure to securely house both the satellite speaker and its supplied mounting pole for storage and transport. A dedicated locking system holds all of the equipment in place.
As with all FBT products, graceful but effective engineering is at the heart of the
VERTUS CS1000, as exemplified by the
mounting pole. Comprised of three sections, the pole allows users to alter the height of the satellite to suit their requirements, while a custom joint provides continuous vertical adjustment to ensure precise coverage in every venue. No listener is left untouched by the VERTUS CS1000 - the slim proportions of the satellite facilitate a wide horizontal dispersion of 110°, while the precision placement of the six 3” drivers to form a
J-array creates a vertical dispersion of 30°
(+10° / -20°).
Need more power? The VERTUS CS1000
takes a modular approach in that two
systems can be used in a dual configuration to form a totally coherent and much more powerful solution. By stacking the two subwoofers and locking the two satellites together end-to-end (via optional hardware), the maximum SPL of the overall system is raised by 6dB. Coverage is also extended - although the horizontal dispersion remains consistent, vertical dispersion increases to 40°
(+20° / -20°)
Other features ensure ease of use and a rugged build quality. The subwoofer is equipped with aluminum handles complete with a rubber insert to guarantee a comfortable grip - transporting the entire system, including the subwoofer, satellite, mounting pole, joint and all cables, is both convenient and comfortable. The fanless amplifier module is protected by diecast aluminum, while onboard DSP offers a choice of eight dedicated presets, each one shaped by FBT’s long experience in creating proprietary algorithms to suit every requirement.
Finally, the VERTUS CS1000 is compact in
dimension but big on sound. The volume
of the satellite can be adjusted in accordance with the subwoofer in 8 steps between -4.5 /
+5dB range, while a selectable high-pass filter ensures optimum reproduction. And as your requirements grow, the VERTUS CS1000 compact line array will grow with you - simply combine four systems in a two per-side stereo configuration to achieve a remarkable
8.000W peak.
Vertus CS1000
Compact Two-Way
Integrated Array System
600W + 400W RMS - 129dB SPL
•
2-way speaker system
•
6 x full-range, 3” (70mm) neodymium high efficiency custom woofers with 0.75”
(20mm) voice coils
•
Subwoofer with a custom 12” (320mm) long excursion speaker with a 2.5”
(64mm) voice coil
• Frequency response of 40Hz to 20KHz
• Onboard Class-D, switch-mode amplifier delivering 600Wrms + 400Wrms for LF and HF respectively
• Built-in DSP with eight presets to suit every application
• Variable satellite volume between -4.5 / + 5 dB in 8 steps
• Control Panel with master volume, presets, variable satellite volume, LED status, mic/line
• Input and link via XLR and Neutrik SPEAKON for satellite connection
•
Dispersion 110° (H) x 30 ° (V)
•
Modular design allowing two systems to be configured as one single solution via optional accessories
• Bass reflex stackable subwoofer in a birch plywood enclosure with diecast aluminum handle and rubber inserts, plus M20 support and a custom pole-mount solution facilitating adjustable height and vertical aiming
•
The satellite and pole are fully integrated into the subwoofer cabinet, where a push button system locks the satellite in place for transportation
• The satellite is equipped with a coupling system for accessories which allow the extension of the length of the line array, positioning one atop the other. Alternatively, the same system allows the satellite to be permanently wall-mounted
•
Ideal for both live applications and fixed installations
•
Easily expandable to a total power of
8.000W peak (via a stereo system consisting of 4 x VERTUS CS1000, positioned two per side)
25
Model
Configuration
Built-in amplifier cont. LF/HF
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Accessories page 76
Nylon cover
Carrying bag
Trolley
Stand adapter ø 35mm
Directional stand adapter
Directional wall mount bracket
Stand column h 59cm
Stand column h 114cm
Flying Bar
Joint Bar
CLA604a
way 2
W RMS 350/80
W RMS 400/100
W 800/200
@-6dB 130Hz - 20KHz inch 6 x 4” - 1” coil inch 4 x 1” - 1” coil dB 122 / 125
H x V 100° x 20° kOhm 22 kHz 2.5
VA 450
XLR with loop m / ft 5 / 16.4
mm inch
130x841x130
5.12x33.1x5.12
Kg/Lb 9 / 19.84
mm inch
220x930x220
8.66x36.61x8.66
Kg/Lb 11.5 / 25.35
CLA604a
VT-C 604
36122
VT-S 604/W
35723 Black - 37044 White
VT-DS 604/W
37053 Black - 37054 White
VT-W 604/W
35722 Black - 37043 White
VT-SC59 604/W
36879 Black - 36883 White
VT-SC114 604/W
37041 Black - 37042 White
CLA208Sa
1
400
600
1200
50Hz - 180Hz
-
2 x 8” - 2” coil
125 / 129 half space
Omnidirectional
22
0.15
450 stereo XLR with loop/HP out
5 / 16.4
550x270x500
21.7x10.6x19.7
20 / 44.09
690x370x625
27.16x14.56x24.60
23.5 / 51.80
CLA208SA
VT-C 208
36123
CS1000
2
600/400
-
1200/800
40Hz - 20KHz
12 - 2.5 coil
6 x 3 - 0.8 coil - neodymium
125 / 129
110° x 30°
22
1.8
640
XLR with loop
5 / 16.4
Satellite
105X530X120
4.13x20.86x4.72
Satellite
3.5 / 7.71
695X473X580
27.36x18.62x22.83
33.5 / 73.85
Subwoofer
565X373X450
22.24x14.68x17.71
Subwoofer
22.4 / 49.38
CS1000
VT-C 1000
41024
VT-CB 1000
40730
TR-100
40912
VT-W 1000/W
40728 Black - 41039 White
VT-F 1000
VT-F 1000/W
40913 Black - 41041 White
VT-J 1000/W
40731 Black - 41040 White
VT-J 1000 VT-W 1000
TR-100 VT-S 604
MSA 220
VT-DS 604
MSA 220
VT-CB 1000
SPEAKER
SYSTEMS
27
SUBline
The new improved
SUBline incorporates
Class D amplification, designed and made in
Italy to FBT’s exacting standards, plus switchmode power supplies and DSP presets for accompanying full range enclosures. All models are road-ready with tour-grade birch plywood construction, integrated carrying handles and optional wheels. In addition, in/ out stereo connectors aid flexibility, facilitating the use of a single sub in left-right stereo setups.
Created with the aim to maximize SPL/SIZE ratio, they have Class
D amplifiers, switch mode power supply and Digital Signal
Processor with presets to match any other FBT speaker.
With IN/OUT stereo connectors, it is possible to use only one subwoofer with Left and Right speakers
Optional wheels, ergonomic integrated carrying handles and tourgrade plywood cabinets allow an
easy transport
SUBLine 218Sa
Processed active subwoofer
1200W RMS - 140dB SPL
SUBLine 118Sa
Processed active subwoofer
1200W RMS - 134/137dB SPL
• Bass-reflex design Subwoofer
•
2 x 460mm (18”) high excursion woofer with
75mm (3”) voice coil, custom made for FBT by B&C
• Frequency response from 30Hz to 120Hz
• 1200W RMS Class D power amplifier with switch mode power supply
• DSP with 6 presets, 3 x EQ with 2 x LPF crossover settings, 6-step digital delay line
• Control panel with stereo XLR in/out, Volume.
EQ presets, Delay, Phase reversal switch 0°-180°,
3 status LED indicators
• 18mm Baltic birch plywood enclosure with heavy duty coating
•
2 x M20 threads for stand pole mount, 4 x aluminum ergonomic FBT handles, optional wheels
• Provides additional low frequency extension when used along with FBT’S MUSE 210LA 2 x
10” active line array system
• Bass-reflex design subwoofer
•
460 mm (18”) high excursion woofer with 75 mm (3”) voice coil, custom made for FBT by
B&C
• Frequency response from 33Hz - 100Hz
•
1200W RMS Class D power amplifier with switch mode power supply
• Digital Signal Processor with 6 presets, 4 equalization with 2 LPF Crossover Settings, 6 step digital delay line up to 3.5m
• Control Panel with Stereo XLR in/outs,
Volume, EQ Presets, Delay, Phase Reversal
Switch 0°-180°, 3 status LED indicators
• 15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
• M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
SUBLine 218S
Sound Reinforcement Subwoofer
2400W RMS - 143dB SPL
• Neutrik Speakon NL4MD-V connectors
IN & LINK OUT
• External digital processor required: FBT
DLM26 Digital Loudspeaker Management
SUBLine 118S
Sound Reinforcement Subwoofer
1200W RMS - 133/136dB SPL
• Neutrik Speakon NL4MD-V connectors
IN & LINK OUT
• External digital processor required: FBT DLM26
Digital Loudspeaker Management
SUBLine 115Sa
Processed active subwoofer
700W RMS - 132/135dB SPL
SUBLine 112Sa
Processed active subwoofer
700W RMS - 130/133dB SPL
• Bass-reflex design with high SPL and punch
• 380mm (15”) high excursion magnet woofer with 75mm (3”) voice coil
• Frequency response from 40Hz to 140Hz
•
New amplifier engineered and manufactured by FBT, 700W RMS LF in
Class D
•
Digital Signal processor with 8 presets,
2 equalization with 2 LPF Crossover settings, cardioid configuration
• Control panel with Stereo XLR in/outs,
Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
•
15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
•
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
• Bass-reflex design with high SPL and punch
•
320mm (12”) high excursion magnet woofer with 75mm (3”) voice coil
• Frequency response from 40Hz to 140Hz
•
New amplifier engineered and manufactured by FBT, 700W RMS LF in
Class D
•
Digital Signal processor with 8 presets,
2 equalization with 2 LPF Crossover settings, cardioid configuration
• Control panel with Stereo XLR in/outs,
Volume, EQ presets, 8 steps Delay from 0.25m to 3.5m, Phase Reversal Switch 0°-180°, 3 status LED indicators
•
15 mm (0.59”) birch plywood scratch resistant enclosure with internal bracing
•
M20 (20mm) top mount speaker stand socket and two aluminum ergonomic FBT handles
29
15 mm (5/8”) Baltic birch plywood cabinet with scratch & scuff resistant paint finish
M20 (20 mm) top mount speaker stand socket, two aluminum carrying handles
Model
Configuration
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak (Bi-Amp)
Dispersion
Crossover frequency
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight way
SUBLine 218Sa
1
W RMS 1200
W 2400
@-6dB 30Hz - 100Hz inch 2x18 - 3 coil inch dB 137 / 140 half-space
H x V omnidirectional kOhm 22 kHz 100Hz
VA 800 stereo XLR with loop m / ft 7 / 16.4
mm inch
975x661x670
38.18x25.98x26.37
Kg / Lb 81 / 178.57
mm inch
1150x830x800
45.27x30.70x31.49
Kg / Lb 96 / 207.23
SUBLine 218S
way 1 reflex
W RMS 2400
W 1200
W 4800
Ohm 4
@-6dB 30Hz - 250Hz inch 2x18 - 3 coil inch dB 101 dB 139 / 143 half-space
H x V omnidirectional kHz external active
28hz - 24dboct mm inch
2 x Speakon NL4 in & throu
970x661x670
38.18x25.98x26.37
Kg/Lb 77 / 169.75
mm inch
1150x780x800
45.27x30.70x31.49
Kg/Lb 90 / 198.41
SUBLine 18S
1 reflex
1200
600
2400
4
33hz - 400hz
18 - 3 coil
-
98.5
133 / 136 half-space omnidirectional external active
28hz - 24dboct
2 x Speakon NL4 in & throu
555x572x666
21,8x22,5x26,2
42 / 92,6
800x642x800
31,5x25,3x31,5
52 / 114,6
SUBLine 18Sa
1
1200
2400
33Hz - 100Hz
1x18 - 3 coil
-
134 / 137 half-space omnidirectional
22
100Hz
800 stereo XLR with loop
7 / 16.4
555x572x666
21,8x22,5x26,2
44,5 / 98,1
800x642x800
31,5x25,3x31,5
54,5 / 120,1
SUBLine 15Sa
1
700
1400
38Hz - 140Hz
1x15 - 3 coil
-
132 / 135 half-space omnidirectional
22
90 or 140Hz
640 stereo XLR with loop, HP out
6 / 16.4
500x517x570
19,7x20,3x22,4
28 / 61,7
600x617x670
23,6x24,3x26,4
32 / 70,5
SUBLine 12Sa
1
700
1400
42Hz - 140Hz
1x12 - 2.5 coil
-
129 / 133 half-space omnidirectional
22
90 or 140Hz
640 stereo XLR with loop, HP out
5 / 16.4
430x447x480
16,9x21,5x18,9
23 / 50,7
530x547x580
20,9x21,5x22,8
27 / 59,5
Accessories page 77
Nylon cover
4 wheels kit: 2 with brake 80mm ø
4 wheels kit with brake 100mm ø
SL-C 218S
38897
KBW-1004S
25197
SL-CH 218S
38898
SUBLine 18Sa
SL-C 118
41225
SUBLine 18Sa with wheels
SL-CH 118
41226
SUBLine 15Sa
SL-C 115
41227
KW-HM 80
30423
SUBLine 15Sa with wheels
SL-CH 115
41228
SUBLine 12Sa
SL-C 112
41229
KBW-1004S
25197
STAGE
MONITOR
31
StageMaxX
MAXX MORE!
THE NEW STAGE MONITOR
FBT’s brand new StageMaxX has been inspired by the need to have a product specifically designed and engineered for use as stage monitor, overcoming all compromises for a full user satisfaction.
The extremely heavy-duty and resonance free polypropylene cabinet is born from the enormous experience of FBT in gas injected mold engineering it acoustically behaves like a wooden cabinet allowing the perfect integration of all the components for an uncompromising quality in a compact, elegant, unobtrusive on stage, extremely comfortable and easy to carry product.
StageMaxx 12Ma is the right combination of all the quality features to be a perfect stage monitor:
• Low profile and aesthetic elegance
• Compact size
• Frequency response studied for stage monitor applications
• High headroom before feedback
• High sound quality
• Great power and dynamics
• Symmetric dispersion
• Aligned LF and HF acoustic centers
• Easy handling on stage
• Lightweight
• Heavy-duty polypropylene cabinet
StageMaxX features a 12” B&C loudspeaker custom made for FBT and coaxially mounted with a B&C 1” exit throat compression driver.
The coaxial configuration allows perfect alignment of the acoustic centers of the transducers, guaranteeing symmetry of dispersion and improving focus of the stereo image in Left-Right configuration.
Bi-amplification design with high dynamic
Class D amplifiers delivering 400W + 100W RMS through a switch mode power supply.
Digital Signal Processor with 4 factory equalization presets provides simple and efficient EQ adjustment to optimize the acoustical response for different applications. The FOH preset allows the use in suspended installation as well as ‘drum fill’ applications.
StageMaxX features two lateral M10 rigging points and wall mounting bracket for different applications (optional accessories).
3 frontal status LED indicators to control
ON OFF limiter and protection state.
New Neutrik POWERCON TRUE 1 AC connector with Input and loop out to supply
AC power to up to 7 additional StageMaxX speakers at 230Vac and 3 at 117Vac.
Three ergonomic integrated carrying handles, one frontally placed to easily drag and move the monitor on stage and the replaceable Teflon feet ensure sliding on stage with minimal wear.
The cabinet has 35° or 55° tilted front panel for an optimal listening distance for single user (35°) or for more users (55°).
The 4 presets are:
• ORIGINAL: is the typical “MaxX” sound adapted to “STAGE” application
• HI-CUT/DRUM FILL: provides less mid-high for a comfortable listening in near-field at high level
• LO-CUT/DOUBLE: provides less low frequency for better intelligibility and for optimal coupling in stereo configuration
• FOH: Front Of House use in suspended or polemount installations
StageMaxX 12Ma
Processed Active Reinforcement Monitor
400W + 100W RMS - 130dB SPL
• 2-way, bi-amplified, bass reflex design cabinet
• Coaxial custom FBT 320 mm (12”) B&C speakers with 64 mm (2.5”) voice coil
• B&C 25 mm (1”) exit throat compression driver and 44 mm (1.7”) voice coil
•
Bi-amp: high dynamic Class D amplifiers
400W + 100W RMS to provide a pleasant sound even at loud volume
• High efficiency switch mode power supply
• Digital Signal Processor with 4 factory equalization presets
• Control Panel: XLR/Jack input and XLR link out, Volume, 4 Presets, HP Filter, 3 frontal status LED indicators
• Neutrik POWERCON TRUE 1 AC connector with Input and loop out to supply AC power to additional StageMaxX speakers
• 90° Directivity Horn
• Proprietary filtered algorithms, dynamic equalization at low frequencies, advanced energy control allows an high SPL while granting reliable and distortion free audio reproduction with high headroom
• Sturdy gas-injected polypropylene molded enclosures engineered to avoid undesired resonance
• Weather resistant coating under the grill to protect the driver and the speaker
• High SPL in a compact size monitor
• 35° or 55° tilted front panel for an optimal listening distance for single or multiple users
• Three ergonomic integrated carrying handles, two M10 rigging points
• Teflon replaceable feet allow an easy use on stage
Available in white colour:
StageMaxX 12Ma W
33
Model
Configuration
Built-in amplifier cont. LF/HF
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
Accessories page 77
Nylon cover
Wall metal bracket to mount in horizontal position
Metal bracket with top-hat speaker stand socket
StageMaxX 12Ma
way 2
W RMS 350/80
W RMS 400/100
W 800/200
@-6dB 60Hz - 20KHz inch 12 - 2.5 coil inch 1 - 1.7 coil dB 124 / 130
H x V 90° kOhm 22 kHz 1.8
VA 450
XLR with loop m / ft 5 / 16.4
mm inch
550x289x392
21.65x11.37x15.43
Kg / Lb 13.6 / 29.98
mm inch
670x430x500
26.37x16.92x19.68
Kg / Lb 16.4 / 36.15
StageMaxX 12Ma
SM-C 12
36065
SM-U 12
36066 Black
36753 White
SM-S 12
37099
SM-S 12
Metal bracket with top-hat speaker stand socket
MSA 300
Aluminium speaker stand Air-Cushioned
SM-U 12
Wall metal bracket to mount in horizontal position
Monitor 55° Monitor 35°
SPEAKER
SYSTEMS
35
HiMaxX
36
A BENCHMARK
IN SOUND
REINFORCEMENT
With the HiMaxX series, FBT establishes a
reference point on the scenario of 12” and 15” sound reinforcement polypropylene enclosures, introducing performance and technical content of an impressive standard.
The engineering of the enclosures, the use of switch mode power supplies and high-
efficiency power amplifiers, the custom design of the transducers made FBT’s R&D team achieve the maximum in power/weight ratio.
HiMaxX 60a
1100+250W
HiMaxX 60
700W
Three models; two 2-way full-range enclosures in polypropylene,
HiMaxX 40 (12”+1”) and HiMaxX 60 (15’’+1.4”), plus a compact
18’’ bandpass SUB in birch plywood (HiMaxX 100Sa). Compact and light weight, HiMaxX brilliantly solve all the most demanding needs for
bands, musicians and professionals looking for powerful, versatile
and very high quality loudspeaker enclosures. Ideal for live and sound reinforcement applications requiring ease of transport, they are also suited to fixed installations, thanks to the cabinets’ design and optional accessories.
HiMaxX 40a
1000+250W
HiMaxX 40
500W
HiMaxX 100Sa
1200W
Amazing audio quality, thrilling performance, innovative design and extreme reliability
37
38
• A powerful dynamic design for aggressive clean-cut lines. A sturdy light-weight
enclosure that ensures great versatility
and is ready for installation, thanks to its special mounting points and optional accessories.
The asymmetrical design enables the enclosures to be used as stage monitors.
• A specially designed control panel ensures
ease of use and intuitive control.
Mic/Line input, auxiliary stereo input with
(HiMaxX 40a), 3-band EQ, ground-lift, diagnostic LED.
BOX 100
Ceiling bracket balancing stand
• Loudspeaker components are engineered in collaboration with B&C. FBT studied and designed special chassis. A more efficient
ventilation circuit with a consequent reduction of 2dB “power compression”, a considerably stiffer cone to improve reliability and distortion and an even more
powerful neodymium magnet to increase control and efficiency.
The voice coil has a diameter of 75 mm (3”) for higher power handling and reliability.
• B&C compression driver with a 25 mm (1’’) throat and 44 mm (1.7’’) coil (HiMaxX 40) for high power handling. Thanks to the use of a shorting copper cap, high frequencies are even more dynamic and crystal-clear.
• The development of the innovative amplifier is the result of years of research by the
FBT R&D labs. It manages to combine the contrasting features of lightness, high
power, efficiency and reliability, using the very latest technology. A switch mode
power supply to reduce the weight and increase the power output velocity, a very high performance PWM amplifier for the low
frequencies, to maximize the power fed out with minimum heat dissipation. A Class G
amplifier for the high frequencies enables to achieve the audio quality of a Class A, with a much higher output.
• The silent preamplifier manufactured with
SMD technology has the job of handling the equalization, 24dB/oct crossover, sophisticated protections, limiter and the commands of the control panel.
• The horn’s profile has been designed to ensure greater directivity control and lower distortion. The dispersion angle is 90°H x
60°V.
39
MSA 300
Adjustable air-cushion floor stand (ø 35 mm - 1.38”)
- max weight
56 Kg (124 Lb)
2-way, bi-amplified in
Bass- Reflex design
Switch mode power supply for an excellent ratio weight/power
Sturdy cabinet in polypropylene also designed for stage monitor use
Analog signal processor with limiter
4 x M10 suspension points, 35 mm ø (1.38”) top-hat for speaker stand placement and wall bracket mount flange, 2 integrated carrying handles
90°H x 60°V constant directivity horn
HiMaxX 60a
Processed Active Speaker
1100W + 250W RMS - 135dB SPL
•
B&C custom designed 380 mm (15”)
neodymium woofer with 75 mm (3”) voice coil
•
B&C 36 mm (1.4”) compression driver with
64 mm (2.5”) voice coil
• 1100W RMS PWM LF power amplifier
• 250W RMS Class G HF power amplifier
• Control panel with:
- XLR Input and XLR Link
- Gain and Volume functions in a single
potentiometer improving the dynamic range and input signal/noise ratio
- 3-band EQ (Bass, Mid, High)
- Ground-lift
- Diagnostic LED
Passive crossover filter featuring “soft-trip” circuitry to ensure full protection of LF woofer and HF driver
2 NL-4 Neutrik™
Speakon connectors
HiMaxX 60
Sound Reinforcement Speaker
700W / 8ohm - 132dB SPL
HiMaxX 40a
Processed Active Speaker
1000W + 250W RMS - 133dB SPL
•
B&C custom designed 320 mm (12”)
neodymium woofer with 75 mm (3”) voice coil
•
B&C 25 mm (1”) compression driver with
44 mm (1.7”) voice coil
•
1000W RMS PWM LF power amplifier
•
250W RMS Class G HF power amplifier
•
Control panel with:
- Gain and Volume functions in a single
potentiometer improving the dynamic range and input signal/noise ratio
- Combo XLR/jack input XLR link
- Mic/Line selection
- Independent RCA input channel with separate volume control to connect external devices such as MP3, CD, PC players
- 3-band EQ (Bass, Mid, High)
- Ground-Lift
- Diagnostic LED
• Enclosure suitable for stacking
HiMaxX 100Sa
Processed Active Subwoofer
1200W RMS - 139dB SPL
• Bandpass subwoofer design
•
18” (460 mm) custom neodymium B&C
woofer with a 3” (75 mm) voice coil
• Built-in 1200W RMS PWM amplifier
•
Switch mode power supply
• Analogue signal processor with limiter
• Control panel with:
- XLR/input and XLR stereo outputs with
Hi-Pass, filter for connecting the satellites
- Volume
- Ground-Lift
- 0°-180° phase inverter switch
- Limiter LED
•
18 mm (0.7”) birch plywood enclosure
• The special “bandpass” acoustic loading increases efficiency and maximum SPL
•
8 x M10 suspension points, stand socket and two integrated wooden handles
• Optional 4 swivel-mount casters 80 mm
ø (3.15”) on request
HiMaxX 40
Sound Reinforcement Speaker
500W / 8ohm - 131dB SPL
41
Model
Configuration
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont./peak
Dispersion
Input impedance
Crossover frequency
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power
Short term power (IEC 268-5)
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont./peak
Dispersion
Crossover frequency
Recommended HP filter
Recommended external filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
HiMaxX 60
way 2
W RMS 700
W 350
W 1400 ohm 8
@-6dB 40Hz - 20kHz inch 1x15 - 3 coil inch 1.4 - 2.5 coil dB 99 dB 129/132
H x V 90° x 60° kHz 1.3
-
35Hz - 24dBoct
2 x Speakon mm inch
482x757x427
19x29.8x16.8
Kg / Lb 26 / 57.3
mm inch
520x867x600
20.4x34.1x23.6
Kg / Lb 28.5 / 62.8
HiMaxX 60a
way 2
W RMS 1100/250
W 2200/500
@-6dB 40Hz - 20kHz inch 1x15 - 3 coil inch 1.4 - 2.5 coil dB 129/135
H x V 90° x 60° kohm 22 kHz 1.2
XLR with loop m / ft 5 / 16.4
mm
inch
482x757x427
19x29.8x16.8
Kg / Lb 28.3 / 62.4
mm
inch
520x867x600
20.4x34.1x23.6
Kg / Lb 30.3 / 66.8
Accessories page 77
Nylon cover
Directional wall mount bracket
Wall metal bracket to mount in vertical position
4 wheels kit: 2 with brake 80mm ø
HiMaxX 60a
V 33
15777
SJ-8
18614
BOX 105
15772
HiMaxX 40
2
500
250
1000
8
50Hz - 20kHz
1x12 - 3 coil
1 - 1.7coil
99
127/131
90° x 60°
1.6
-
45Hz - 24dBoct
2 x Speakon
407x634x370
16x24.9x14.5
16 / 35.2
495x720x470
19.5x28.3x18.5
18.5 / 40.8
HiMaxX 40a
2
1000/250
1600/500
45Hz - 20kHz
1x12 - 3 coil
1 - 1.7 coil
127/133
90° x 60°
22
1.6
XLR/jack with loop RCA aux
5 / 16.4
407x634x370
16x24.9x14.5
17.9 / 39.4
495x720x470
19.5x28.3x18.5
20.5 / 45.2
HiMaxX 40a
V 29
10186
BOX 100
10187
BOX 101
10188
HiMaxX 100Sa
Band-Pass
1200
2400
38 - 120Hz
1x18 - 3 coil
-
135/139 omnidirectional
22 active 120 stereo XLR with loop
5 / 16.4
530x605x655
21x23.8x25.8
43 / 94.8
660x735x785
26x29x31
47 / 103.6
HiMaxX 100Sa
V 56
29846
HiMaxX 100Sa with wheels
HM-CH 100
37049
KW-HM 80
30423
SPEAKER
SYSTEMS
43
ProMaxX
44
THE NEW
PROMAXX BY
FBT REPRESENTS
THE NEXT STEP
IN THE
EVOLUTION
OF A PORTABLE
SOUND CLASSIC
With a specially developed polypropylene cabinet and stylish full grille aesthetic, the new ProMaxX by FBT represents the next step in the evolution of a portable sound classic.
Equipped with custom FBT speakers complete with
B&C’s renowned compression driver technology,
PROMAXX combines true made-in-Italy
quality and style. At its heart is a purpose-built
FBT amplifier module with a switch-mode power supply. For the low frequency section, 700W RMS is driven via a highly efficient Class-D topology, boasting extremely low THD. For HF, meanwhile,
200W RMS is delivered by a Class-H / AB design chosen to ensure the highest definition of audio performance at high frequencies.
Also onboard is a powerful digital signal processing (DSP) platform made available to users of all levels thanks to an intuitive graphical user interface. Located on the rear of the enclosure, the menu-driven system is navigated via a single rotary control with pushto-select functionality.
Users can choose between 6 equalizer presets, each carefully designed by FBT engineers to ensure that every application is catered for (see below). Additionally, 2 preset slots are available for users to form their own designs, using 5 parametric equalizers per slot. Also available is a high-pass filter, a mic/line selector, low, mid and high tone settings and an optional delay of between 0 and 3.5 metres. Finally, users can exclusively choose between two limiter modes,
MAX-SPL or MAX-QUALITY, to best suit their performance.
The PROMAXX feature-set is matched by the enclosure’s versatility, with options for polemounting, wall-hanging, suspension or even deployment in an array. The result is the most accessible PROMAXX yet.
ProMaxX 114a
700+200W
ProMaxX 114
700W
ProMaxX 112a
700+200W
ProMaxX 112
400W
ProMaxX 110a
700+200W
ProMaxX 110
300W
ProMaxX 15Sa
1200W
Pow er f ul an d Ve rs at i l e - Li g h t we i g h t - In c re a s e d S P L - D S P w it h 8 p re s e ts
Presets for every occasion
PROMAXX offers 6 presets to cater for a broad variety of uses, each crafted by FBT engineers. Employing powerful DSP, the presets ensure reliability while eliminating distortion.
ORIGINAL / LIVE The renowned, smooth FBT sound
VOCAL A special EQ setting to maximise speech intelligibility
DJ Designed to keep the energy high and your audience dancing
TOURING The reliability and the roar of the industry’s most popular touring systems
LOUDNESS The ultimate preset for listening at a medium or low volume
WARM A special setting to emphasise full-bodied, low-mid frequencies.
Two ergonomic carrying handles, M10 fly points, top-hat speaker stand socket.
2 - way enclosures have 3 monitor tapers for use as a floor wedge at 12°,
45°, 55°, providing extraordinary versatility for monitor application.
45
12° 40° 55°
2-way, bi-amplified, bass reflex design cabinet
Biamped: 700W RMS LF,
200W RMS HF, power amplifiers in Class D for
LF and in Class H/AB for
HF with switch mode power supplies
Digital signal processor with graphic display
Control Panel features balanced XLR/Jack input, XLR LINK OUT, 2 x Volume, RCA Stereo input, DSP display with rotative encoder and push
2 x M10 suspension points, 35mm (1,3/8”) top-hat speaker stand socket, wall bracket mount flange plate
90°H x 60°V constant directivity horn
Front of House or Stage
Floor Monitor: with 12°,
40° and 55° monitoring angles
ProMaxX 114a
Processed Active Speaker
700W + 200W - 135.5dB SPL
•
355mm (14”) LF neodymium magnet woofer with 75mm (3”) voice coil, custom made for FBT by B&C
•
35mm (1,4’’) exit throat B&C HF compression
driver with 64mm (2,5”) voice coil
• Frequency response from 45Hz to 20 kHz
•
Compact Dimensions: ProMaxX 114a uses the same size gas-injected polypropylene molded enclosure as the ProMaxX 112a, but features our
14” LF Woofer for lower frequency SPL
•
Full grille design with black acoustic cloth
• Extremely light, only 17,4kg / 40.78lb
ProMaxX 114
Passive reinforcement speaker
700W / 8ohm - 132dB SPL
ProMaxX 112a
Processed Active Speaker
700W + 200W - 133dB SPL
•
320mm (12”) LF magnet woofer with
64mm (2.5”) voice coil, custom made for
FBT
•
25mm (1”) exit throat B&C HF magnet
compression driver with 34mm (1.4”) voice coil
• Frequency response from 48Hz to 20KHz
• Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
•
Full grille design with black acoustic cloth
• Extremely light only 14.8Kg/32.62lb
ProMaxX 112
Passive reinforcement speaker
400W / 8ohm - 129dB SPL
Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
ProMaxX 110a
Processed Active Speaker
700W + 200W - 131dB SPL
•
250mm (10”) LF magnet woofer with
50mm (2”) voice coil, custom made for
FBT
•
25mm (1”) throat exit B&C HF magnet
compression driver with 34mm (1.4”) voice coil
• Frequency response from 58Hz to 20KHz
• Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
•
Full grille design with black acoustic cloth
• Extremely light only 10.3kg/22.70lb
ProMaxX 110
Passive reinforcement speaker
300W / 8ohm - 127dB SPL
ProMaxX 15Sa
Processed Active Subwoofer
1200W - 136dB SPL
•
Compact band-pass design subwoofer with
high SPL and punch
• 380 mm (15”) high excursion woofer with
76 mm (3”) voice coil, custom made for FBT
by B&C
• Frequency response from 38Hz to 120Hz
•
1200W RMS Class D power amplifier with
switch mode power supply
•
Digital Signal Processor with 8 presets,
2 equalization with 4 LPF different frequency
• Control Panel with XLR input and link out,
Volume, EQ Presets, Delay, Phase Switch
0°-180°, Ground-Lift Switch
• 15 mm (5/8”) Baltic birch plywood cabinet with scratch & textured resistant paint finish
•
M20 (20 mm) top mount speaker stand socket, two aluminum carrying handles
• Provides additional low frequency reinforcement when used along with the
ProMaxX speakers
47
Model
Configuration
Built-in amplifier cont. LF/HF
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak
Dispersion
Crossover frequency
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Accessories page 77
Nylon cover
Wall metal bracket to mount in horizontal position
4 wheels kit: 2 with brake 80mm ø
Pro
MaxX 114a
way 2
W RMS 700/200
W RMS -
W 1400/400
@-6dB 45Hz - 20KHz inch 1,4 - 2,5 coil dB 127,5 / 135,5
H x V 90° x 60° kOhm 22 kHz -
VA 640
XLR with loop, RCA ST m/ft 5 / 16,4 mm inch
402x644x345
15,8x25,4x13,6 kg/lb 17.5 / 40.78
mm inch
500x745x440
19,7x29,3x17,3 kg/lb 20.1 / 44.31
ProMaxX 114
way 2
W RMS 700
W 350
W 1400
Ohm 8
@-6dB 50Hz - 18KHz inch 14 - 3 coil - neodymium inch 1.4 - 2.5 coil dB 100 dB 128 / 132
H x V 90° x 60° kHz 1.3
40hz - 24dboct
2 x Speakon NL4 in & throu kg/lb 15 / 33.06
kg/lb 18 / 39.68
ProMaxX 112
2
400
200
800
8
55Hz - 18KHz
12 - 2.5 coil
1 - 1.4 coil
99
125 / 129
90° x 60°
1.6
45hz - 24dboct
2 x Speakon NL4 in & throu
402x644x345
15,8x25,4x13,6
13.4 / 29.54
500x745x440
19,7x29,3x17,3
16.4 / 36.15
ProMaxX 112a
2
700/200
-
1400/400
48Hz - 20KHz
12 - 2.5 coil
1 - 1,4 coil
126 / 133
90° x 60°
-
22
640
XLR with loop, RCA ST
5 / 16,4
402x644x345
15,8x25,4x13,6
14.8 / 32.62
500x745x440
19,7x29,3x17,3
17.8 / 39.24
ProMaxX 114a
V 64
33326
BOX 128
33329
ProMaxX 112a
V 64
33326
BOX 128
33329
ProMaxX 110
2
300
150
600
8
60Hz - 18KHz
10 - 2 coil
1 - 1.4 coil
97
122 / 127
90° x 60°
1.8
50hz - 24dboct
2 x Speakon NL4 in & throu
320x550x275
12,6x21,6x10,8
8.9 / 19.62
400x630x360
15,7x24,8x14,2
11.4 / 25.13
ProMaxX 110a
2
700/200
-
1400/400
58Hz - 20KHz
10 - 2 coil
1 - 1,4 coil
124 / 131
90° x 60°
-
22
640
XLR with loop, RCA ST
5 / 16,4
320x550x275
12,6x21,6x10,8
10.3 / 22.70
400x630x360
15,7x24,8x14,2
12.8 / 28.21
ProMaxX 15Sa
1
800
1200
2400
-
38Hz - 120Hz
1x15 - 3 coil neodymium
132 / 136 half-space omnidirectional
22 preset dependant
640
XLR with loop
5/16,4
507x585x605
20x23x23,82
31 / 68
615x670x715
24,2x26,4x28,2
35 / 77
ProMaxX 110a
V 63
33325
BOX 127
33328
ProMaxX 15Sa
V 65
33327
ProMaxX 15Sa with wheels
PM-CH 15S
37050
KW-HM 100
30423
SPEAKER
SYSTEMS
49
Evo
2
MaxX
50
The Second generation of an International
Best Seller
Evolving from the FBT EvoMaxX Series of loudspeakers, FBT Evo
2
MaxX speakers feature totally new Digital Sound Processing resulting in improved sound quality and SPL, especially in bass reproduction at high volume. The sound is more relaxing and natural and the four new DSP presets provide quick dynamic equalization and protection contours for any acoustically challenging venue.
Other exciting features are high efficiency and excursion woofers, powerful Class D amplifiers with an extremely low noise floor.
Alongside these key performance improvements,
FBT has been inspired to develop the Evo
2
MaxX
Series by one very important goal – offering the customer more value for money. Evo
2
MaxX lightweight yet sturdy polypropylene cabinets feature a monitor taper designed to ensure that they perform with excellence no matter whether they are used at front of house for a main sound system, as stage floor monitors or within permanent installations.
Additional options are also available for extending low frequency response in the shape of the 15” subwoofer Evo
2
MaxX 9Sa or the
SUBLine 12Sa, 15Sa and 18Sa, all of which boast birch plywood enclosures with 12”, 15” band-pass and 18” reflex designs respectively.
• Sturdy, gas-injected polypropylene molded enclosures, engineered to contain undesired resonance
• High efficiency loudspeakers custom made for FBT with a weather resistant coating, allowing use in covered outdoor applications
• B&C HF compression drivers
• Latest Class D, 400W LF and 100W HF power amplifiers with high efficiency switch mode power supplies.
These amplifiers boast an extremely lightweight design with passively cooled circuitry, meaning no noisy fans!
•
New digital signal processor with dynamic equalizations and sophisticated dynamic limiters four improve sound quality and SPL granting reliable and distortion-free audio reproduction
•
New 4 DSP presets for improved versatility and ease of use
•
Premium sound quality as results of extensive
listening test
• High SPL thanks to FBT’s new digital limiter algorithms and high power class D amplifier
• Ergonomic carrying handles, M10 fly points, a top-hat speaker stand socket and a stage monitor taper - all included to ensure superb versatility for live sound events and permanent installations.
Evo
2
MaxX 6a
400+100W
Evo
2
MaxX 6
400W
Evo
2
MaxX 4a
400+100W
Evo
2
MaxX 4
300W
Evo
2
MaxX 2a
400+100W
Evo
2
MaxX 2
250W
Evo
2
MaxX 9Sa
600W
More powerful Class D amplifiers - Extra lightweight polypropylene cabinets - Higher SPL for optimal audio reproduction
New DSP with four EQ presets - More value for the money
Evo
2
MaxX 2
Evo
2
MaxX 4
Perhaps best of all the fact that Evo
2
MaxX owners can enjoy four loudspeakers in one thanks to FBT’s New four
factory DSP presets. The result of hundreds of hours of development time in FBT’s dedicated R&D facility, the presets optimize the Evo
2
MaxX range to accommodate a vast range of applications.
The presets include:
ORIGINAL: Corresponding FBT benchmark sound for use in general applications
FLOOR/VOCAL: The Evo
2
MaxX immediately becomes an ideal stage monitor. Also suited for high clarity and intelligibility vocal reproduction.
BOOST/LOUNGE: Providing loudness contour with increased bass response for a relaxing and very enjoyable listening, especially at low and medium volume
CLUB/DJ: Providing all the punch and full-bodied response required by DJ users, suitable for high volume DISCO and
PARTY applications
51
Evo
2
MaxX 9 Sa Hi MaxX 100 Sa
2-way, bi-amplified, bass reflex design cabinet
Biamped: 400w RMS LF,
100w RMS HF, Class D power amplifiers with switch mode power supplies
Digital Signal
Processor with 4
Equalization Presets
Sturdy gas-injected polypropylene molded enclosure with two integrated handles and
Stage Floor Monitor taper
25 mm (1”) exit throat
B&C HF compression
driver
Control Panel: features balanced XLR/Jack input and XLR link out,
Volume, EQ Presets,
HP Filter, 3 status LED indicators,
90°H x 60°V Constant
Directivity Horn
Enclosure suitable for stacking
Evo
2
MaxX 6a
Processed Active Speaker
400W + 100W RMS - 130dB SPL
•
380 mm (15”) LF woofer with 64 mm (2.5”) voice coil
• Frequency response from 42Hz to 20 kHz
• 4 x M10 suspension points, 35 mm (13/8”) top-hat speaker stand socket, wall bracket mount flange plate
• Extremely light, only 24.4 Kg / 53.8 Lb
Evo
2
MaxX 6
Passive Reinforcement Speaker
400W/8ohm - 130dB SPL
Evo
2
MaxX 4a
Processed Active Speaker
400W + 100W RMS - 130dB SPL
•
320 mm (12”) LF woofer with
64 mm (2.5”) voice coil
• Frequency response from 50Hz to 20 kHz
• 4 x M10 suspension points,
35 mm (1 3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• Extremely light, only
15.6 Kg / 34.4 Lb
Evo
2
MaxX 4
Passive Reinforcement Speaker
300W/8ohm - 128dB SPL
Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
Speakon NL-4 IN and
LINK OUT connectors
Evo
2
MaxX 2a
Processed Active Speaker
400W + 100W RMS - 128dB SPL
•
250 mm (10”) LF woofer with 50 mm (2”) voice coil
• Frequency response from 58Hz to 20 kHz
• 2 x M10 suspension points, 35 mm (1 3/8”) top-hat speaker stand socket, wall bracket mount flange plate
• Extremely light, only 12 Kg / 26.5 Lb
Evo
2
MaxX 2
Passive Reinforcement Speaker
250W/8ohm - 125dB SPL
Evo
2
MaxX 9Sa
Processed Active Subwoofer
600W RMS - 132dB SPL
•
Compact bass-reflex design Subwoofer
•
380 mm (15”) high excursion woofer with
75 mm (3”) voice coil, custom made for FBT
• Frequency response from 38Hz to 120Hz
•
600W RMS Class D power amplifier with
switch mode power supply
•
Digital Signal Processor with 4 presets,
2 equalization with 2 LPF Crossover Settings
• Control Panel with balanced Stereo combo
XLR/Jack in/outs, Stereo XLR HP-filter
outs, Volume, EQ Presets, Phase Reversal
Switch 0°-180°, 3 status LED indicators
•
Lightweight cabinet enclosure with internal wooden reinforcements
•
M20 (20 mm) top mount speaker stand socket, two integrated carrying handles
• Provides additional low frequency reinforcement when used along with
2 - way Evo 2 MaxX speakers
• Extremely lightweight only 21.7 Kg (48.4 Lb)
Model
Configuration
Built-in amplifier cont. LF/HF
Built-in amplifier max. LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak (Bi-Amp)
Dispersion
Crossover frequency
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
Accessories page 78
Nylon cover
Wall metal bracket to mount in horizontal position
Wall metal bracket to mount in vertical position
Evo
2
MaxX 6a
way 2
W RMS 350/80
W RMS 400/100
W 800/200
@-6dB 42Hz - 20KHz inch 15 - 2.5 coil inch 1 - 1.7 coil dB 126 / 130
H x V 90° x 60° kOhm 22 kHz 1.6
VA 450
XLR with loop m / ft 5 / 16.4
mm inch
482x757x399
19x29.8x15.7
Kg / Lb 24.4 / 53.8
mm inch
595x878x515
23.4x34.6x20.3
Kg / Lb 28.7 / 63.2
Evo
2
MaxX 4a
2
350/80
400/100
800/200
50Hz - 20KHz
22
1.6
450
12 - 2.5 coil
1 - 1.4 coil
124 / 130
90° x 60°
XLR with loop
5 / 16.4
407x634x330
16x25x13
15.6 / 34.4
510x704x410
20.1x29.1x16.1
18 / 39.6
Evo
2
MaxX 6
way 2
W RMS 400
W 200
W 800
Ohm 8
@-6dB 48Hz - 18kHz inch 1x15 - 2.5 coil inch 1 x 1 - 1.7 coil dB 99 dB 126 / 130
H x V 90° x 60° kHz 1.3
40Hz - 24dboct
2 x Speakon NL4 in & thru mm inch
482x757x399
19x29.8x15.7
Kg / Lb 23.9 / 52.7
mm inch
595x878x515
23.4x34.6x20.3
Kg / Lb 28.2 / 62.2
Evo
2
MaxX 4
2
300
150
600
8
55Hz - 18kHz
1x12 - 2.5 coil
1 - 1.4 coil
98
124 / 128
90° x 60°
1.6
45Hz - 24dboct
2 x Speakon NL4 in & thru
407x634x330
16x25x13
16.1 / 35.4
510x704x410
20.1x29.1x16.1
18.5 / 40.7
Evo
2
MaxX 2
2
250
125
500
8
60Hz - 18kHz
1x10 - 2 coil
1 - 1.4 coil
97
121 / 125
90° x 60°
1.8
50Hz - 24dboct
2 x Speakon NL4 in
& thru
352x550x307
13.9x21.6x12.1
11.8 /26
435x630x395
17.1x24.8x15.5
14.4 / 31.7
Evo
2
MaxX 6a
V 33
15777
BOX 104
15771
BOX 105
15772
Evo
2
MaxX 4a
V 29
10186
BOX 100
10187
BOX 101
10188
Evo
2
MaxX 2a
2
350/80
400/100
800/200
58Hz - 20KHz
22
1.8
450
10 - 2 coil
1 - 1.4 coil
122.5 / 128
90° x 60°
XLR with loop
5 / 16.4
352x550x307
13.9x21.6x12.1
12 / 26.5
435x630x395
17.1x24.8x15.5
14 / 30.86
Evo
2
MaxX 2a
V 30
13349
BOX 102
13351
Evo
2
MaxX 9Sa
1
400
600
1200
40Hz - 120Hz
-
1x15 - 3 coil
128 / 132 half-space omnidirectional
22 preset dependant
450 stereo XLR with loop, HP out
5 / 16.4
496x648x485
19.5x25.5x19.1
26.3 / 57.98
595x760x575
23.4x29.9x22.6
30 / 66.13
Evo
2
MaxX 9Sa
V 31
13350
BOX 103
13352
SPEAKER
SYSTEMS
55
J
56
NEW J SERIES - MORE
TECHNOLOGY FOR IMPROVED
PERFORMANCE AND QUALITY
VALUE FOR MONEY
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.
The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A, J 12A and DJ 15A, 200 + 50W for the J 8A and 80 +
40W for the J 5A.
These amplifiers have been designed ‘from the ground up’ in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A,
J 12A and DJ 15A has a switch mode power supply as well as a digital signal processor with
4 pre-sets (ORIGINAL/FLOOR-VOCAL/BOOST-
LOUNGE/CLUB-DJ).
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets (ORIGINAL/
BOOST), whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the
DJ 15A, designed with today’s modern DJ in mind.
The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the
DJ to change the sound of their music to suit the environment they play within.
A multipurpose performer: J speakers are versatile and easy to use in applications like Band PA, DJ, personal monitor, stage performance, theatres and halls, clubs, gyms, bars and more.
S/J8
Adjustable wall mount stand
S/J5
Adjustable wall mount stand
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for
DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
J 15A
350+100W
J 15
300W
DJ 15A
350 + 100W
J 12A
350+100W
J 12
300W
J 8A
200+50W
J 8
160W
J 5A
80+40W
J 5
80W
J 5T
50W
A c o m p r e h e n s i v e l i n e t o f u l f i l l a l l p r o f e s s i o n a l a u d i o n e e d s
BOX 112
Horizontal wall mounting bracket
S/J8U
Wall mounting bracket
S/J5U
Wall mounting bracket
J 5AW
57
2-way bi-amplified system in Bass-Reflex
Polypropylene enclosure with integrated handle except J 5A/5
2 x M10 anchoring points (15A, 12A,
DJ 15A), 2 x M6 suspension points
(8A, 5A)
25mm (1”) HF custom compression driver
(15A, 12A, 8A,
DJ 15A)
90°H x 60°V constant directivity horn (15A,
12A, 8A, DJ 15A)
HP-filter for use with a
Subwoofer
Control Panel: XLR/Jack input and XLR link, Mic/
Line switch, Level, HP filter, EQ presets (J 15,
J 12, J 8) Combo XLR/
Jack and XLR link, Mic/
Line switch, Level, HP filter (J 5)
J 15A
Processed Active Monitor
350W+ 100W RMS - 129dB SPL
• 380 mm (15’’) custom woofer with improved efficiency and linearity
• 350Wrms class D amplifier for LF and
100Wrms for HF.
• High efficiency switch mode power supply
• On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
• 4 DSP preset for maximum acoustical flexibility
J 15
Sound Reinforcement Monitor
300W - 127dB SPL
• NL-4 Neutrik™ Speakon input and link connectors
DJ 15A
Processed Active Monitor
350W+ 100W RMS - 129dB SPL
• Same woofer, amplifier, power supply and On-
Board Digital Signal processing as J 15A
• 4 DSP preset specially designed for DJ users
• Two channels input mixer with stereo/mono OUT
• Input panel with XLR/jack input and XLR Link,
Mic/Line switch, Level, HP filter, 4 Preset Switch,
Stereo RCA input, level, XLR OUT for dasychaining with Stereo/Mono switch selector
J 12A
Processed Active Monitor
350W + 50W RMS - 128 dB SPL
• 320 mm (12’’) custom woofer with improved efficiency and linearity
• 350Wrms class D amplifier for LF and
100Wrms for HF.
• High efficiency switch mode power supply
• On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
• 4 DSP preset for maximum acoustical flexibility
J 12
Sound Reinforcement Monitor
300W - 127dB SPL
• NL-4 Neutrik™ Speakon input and link connectors
Internal passive crossover filter with
“soft-trip” protection circuits on woofer and compression driver
Linear frequency response over the entire dispersion angle
J 8A
Processed Active Monitor
200W+ 50W RMS - 124dB SPL
• 200 mm (8’’) custom woofer with improved efficiency and linearity
• 200Wrms class D amplifier for LF and 50Wrms for HF.
• Low noise toroidal transformer power supply
• On-board Digital Signal processing with dynamic equalizations and protections for high SPL and high reliability.
• 2 DSP preset for maximum acoustical flexibility
• Available in white colour J 8AW
J 8
Sound Reinforcement Monitor
160W - 121.5dB SPL
• NL-4 Neutrik™ Speakon input and link connectors
• Available in white colour J 8W
J 5A
Processed Active Monitor
80W+ 40W RMS - 117dB SPL
• 130 mm (5’’) custom woofer with improved efficiency and linearity
• 25 mm (1’’) neodymium silk dome tweeter with soft compression and phase plug
• 80Wrms class D amplifier for LF and 40Wrms for HF
• Low noise toroidal transformer power supply
• On-board analog signal processing with limiter for high SPL and high reliability
• Available in white colour J 5AW
J 5
Sound Reinforcement Monitor
80W - 117dB SPL
• Input panel with jack and terminal connector for bare wires
• Available in white color J 5W
J 5T
Sound Reinforcement Monitor
50W - 114dB SPL
• 4 position volume selector: 3W - 12,5W -
25W - 50W / 100V
• Input panel with terminal connector for bare wires
• Also available in white colour J 5TW
59
Model
Configuration
Built-in amplifier cont. rms LF/HF
Built-in amplifier max. rms LF/HF
Built-in amplifier max. peak LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL cont/peak
Dispersion
Input impedance
Crossover frequency
AC Power requirements
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions(WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power
Short term power IEC 268-5
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak (Bi-Amp)
Dispersion
Crossover frequency
Recommended HP filter
Input connectors
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Accessories page 78
Nylon cover
J15a
V 38
18614
Directional wall mount bracket
Wall metal bracket to mount in horizontal position
BOX 112
18602
Tripod speaker stand
Adjustable metal “T” stand for N. 2
Adapter from ø 35mm to ø 25mm
White metal frame for ceiling/wall installation
J15a
way 2
W 300/70
W 350/100
W 700/200
@-6dB 48Hz - 20KHz inch 15 - 2 coil inch 1 - 1 coil dB 125 / 129
H x V 90° x 60° kOhm 22 kHz 1.8
VA 400
XLR-jack with loop m / inch 5 / 16.4
mm inch
410x663x387
16,14x26,10x15,23 kg/lb 14 / 30.86
mm inch
495x740x475
19.48x29.13x18.70
kg/lb 17.1 / 37.69
J12a
2
300/70
350/50
700/200
50Hz - 20KHz
12 - 2 coil
1 - 1 coil
124 / 128
90° x 60°
22
2
400
XLR-jack with loop
5 / 16.4
410x663x387
16,14x26,10x15,23
13.7 / 30.2
495x740x475
19.48x29.13x18.70
16.8 / 37.03
J8a
2
150/40
200/50
400/100
60Hz - 20KHz
8 - 1.7 coil
1 - 1 coil
120 / 124
90° x 60°
22
2.5
160
XLR-jack with loop
5 / 16.4
255x415x245
10,03x16,33x9,64
8.2 / 18.7
330x480x320
12.99x18.89x12.59
9.7 / 21.38
J5a
22
3.5
75
2
60/30
80/40
160/80
80Hz - 20KHz
5 - 1 coil
1 dome - 0.75coil
113 / 117
90° x 90°
XLR combo with loop
5 / 16.4
170x275x180
6,69x10,82x7,08
3.4 / 7.49
240x345x235
9.44x13.58x9.25
4.2 / 9.25
J15
way 2
W rms 300
W 150
W 600
Ohm 8
@-6dB 50Hz - 20KHz
J12
2
300
150
600
8
55Hz - 20KHz
J8
2
160
80
320
8
65Hz - 20KHz
J5
2
80
40
160
16
90Hz - 20KHz
J5T
2
50(70/100V)
25
100
16
90Hz - 20KHz inch 15 - 2 coil inch 1 - 1 coil dB 99 dB 124 / 127
12 - 2 coil
1 - 1 coil
98
123 / 127
8 - 1.7 coil
1 - 1 coil
96.5
118.5 / 121.5
5 - 1 coil
1 dome - 0.75coil
94
114 / 117
5 - 1 coil
1 dome - 0.75 coil
91
111 / 114
H x V 90° x 60° kHz 1.8
90° x 60°
2
90° x 60°
2.5
90° x 90°
3.5
90° x 90°
3.5
40hz - 24dboct 45hz - 24dboct 55hz - 24dboct 80hz - 24dboct 80hz - 24dboct
2 x Speakon NL4 in & thru 2 x Speakon NL4 in & thru 2 x Speakon NL4 in & thru 1 x jack + terminal strip terminal strip mm inch
410x663x387
16,14x26,10x15,23 kg/lb 14.7 / 32.4
mm inch
495x740x475
19.48x29.13x18.70
kg/lb 17.8 / 39.24
410x663x387
16,14x26,10x15,23
14.1 / 31.08
495x740x475
19.48x29.13x18.70
17.2 / 37.91
255x415x245
10,03x16,33x9,64
6.6 / 14.55
330x480x320
12.99x18.89x12.59
8.1 / 17.85
170x275x180
6,69x10,82x7,08
3.4 / 7.49
240x345x235
9.44x13.58x9.25
4.2 / 9.25
170x275x180
6,69x10,82x7,08
3.4 / 7.49
240x345x235
9.44x13.58x9.25
4.2 / 9.25
DJ 15a
2
300/70
350/100
700/200
48Hz - 20KHz
15 - 2 coil
1 - 1 coil
125 / 129
90° x 60°
22
1.8
400
XLR-jack with loop St. RCA, XLR out
5 / 16.4
410x663x387
16,14x26,10x15,23
14 / 30.86
495x740x475
19.48x29.13x18.70
17.1 / 37.69
J12a
V 38
18614
BOX 112
18602
J8a
V 37
18613
S-J 8/WHT
18576 Black
39177 White
S-J 8U/WHT
18568 Black
38464 White
SJ-8T
18569
AJ-8
18570
J5a
V 36
18612
S-J 5/WHT
18522 Black
38321 White
S-J 5U/WHT
18523 Black
38465 White
MS 30BK
06076
SJ-5T
18527
AJ-5
18532
SJ-5C W
18526
DJ 15a
V 38
18614
SPEAKER
SYSTEMS
61
X-LITE
62
THE X-LITE
SERIES IS TRULY
VERSATILE AND
PROFESSIONAL
Constructed out out of polypropylene enclosures, the X-LITE series features a sleek design including 3 x carrying handles and
4 x M10 flying points.
In addition, the full front grille provides complete protection, delivering elegance and sturdiness.
Features include built-in Class D amplifier modules providing an amazing 1000W of power to satisfy the most demanding applications, whilst the user-friendly DSP allows 4 x EQ preset selection to perfectly tailor the performance of your X-LITE to your sound requirements.
In addition, the X-LITE series is truly versatile, offering a professional control panel that allows you to set up configurations with or without subs.
Even better - if you do want to extend the
X-LITE low frequency response, you can do so with the dedicated X-SUB 18” powered subwoofer.
Integrated handles, M10 rigging points for suspended installation, 35mm stand socket and monitor taper, all included to make the speaker adaptable to any application
X-LITE 15A
1000W
X-LITE 15
400W
X-LITE 12A
1000W
X-LITE 12
300W
X-LITE 10A
1000W
X-LITE 10
250W
Your music, your performance or your installation can count on FBT’s new X-LITE series of portable powered speaker systems.
63
Common features:
• Polypropylene molded enclosure designed to eliminate unwanted resonances
• Custom FBT Speakers with high linear excursion capability and efficiency
• Compression driver with 25mm (1”) throat and 35mm (1.4”) voice coil
• 1000W, 2-channel amplifier in Class D for LF and in Class AB for HF with a high dynamics response for a pleasant sound at high volume
• Universal switching mode power supply 100-
240VAC
• DSP with 4 EQ presets designed to tailor the sound of the speaker to various applications and installation environments
• Advanced algorithms for filtering and equalization which alter the dynamics of the low frequency energy according to the selected preset, allowing distortion-free high
SPL performance
• Control panel with XLR input and link out,
6.3mm jack stereo input with volume, stereo
RCA input with volume, XLR output selector coupled with stereo / mono, HP filter on / off, mic / line, DSP preset selector
• Integrated mixer with two stereo channels, one channel mic / line input and an output coupled XLR mono / stereo to revive the other channel of the stereo signal to another speaker.
• The presence of 4 presets managed by DSP allows you to modify the response of the speaker in a much more accurate way compared to standard tone controls. In addition, each preset has been designed and optimized in an anechoic chamber to deliver the best possible performance for each application.
• ORIGINAL / LIVE: The ideal preset for live sound reinforcement
• FLOOR / VOCAL: A preset to transform your X-LITE cabinet for use as a stage monitor or for vocals
• CLUB: A special preset to deliver a rich, deep bass response that stays easy on listener’s ears
• DJ: A preset designed to bring out the best in electronic dance music
Monitor 30°
Monitor 45°
64
X-LITE 15A
Processed Active Speaker
1000W - 128dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 380mm (15”) LF woofer with
64mm (2.5”) voice coil
• FBT 25mm (1”) throat /35mm (1.4”) voice coil
HF compression driver
• 42Hz to 20KHz Frequency Response
• 90° H x 60° V constant directivity horn
• 30° or 45° monitor taper
X-LITE 15
Passive Reinforcement Speaker
400W/8ohm - 126dB SPL
X-LITE 12A
Processed Active Speaker
1000W - 127dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 320mm (12”) LF woofer with 50mm (2”) voice coil
• FBT 25mm (1”) throat /35mm (1.4”) voice coil HF compression driver
• 50Hz to 20KHz Frequency Response
• 90° H x 60° V constant directivity horn
• 30 or 45° monitor taper
X-LITE 12
Passive Reinforcement Speaker
300W/8ohm - 125dB SPL
X-LITE 10A
Processed Active Speaker
1000W - 126dB SPL
• 2-way bi-amplified bass reflex
• FBT Custom 250mm (10”) LF woofer with 50mm (2”) voice coil
• FBT 25mm (1”) throat /35mm (1.4”) voice coil HF compression driver
• 58Hz to 20KHz Frequency Response
• 90° H x 60° V constant directivity horn
• 30 or 45° monitor taper
X-LITE 10
Passive Reinforcement Speaker
250W/8ohm - 123dB SPL
X-SUB 18SA
1200W
X-SUB 15SA
1200W
65
Model
Configuration
Built-in amplifier max LF/HF
Frequency response
Low frequency woofer
High frequency driver
Maximum SPL peak
Dispersion
Input impedance
Input connectors
Power cord
Net dimensions (WxHxD)
Net weight
Transport dimensions (WxHxD)
Transport weight
Model
Configuration
Recommended amplifier
Long term power (1)
Short term power (IEC 268-5) (2)
Nominal impedance
Frequency response
Low frequency woofer
High frequency driver
Sensitivity (@1W/1m)
Maximum SPL cont/peak
Dispersion
Crossover frequency
Recommended HP filter
Recommended external DSP
Input connectors
Net dimensions (WxHxD)
Net weight
Shipping dimensions(WxHxD)
Shipping weight
Accessories page 78
Nylon cover
U bracket horizontal wall mount
U bracket vertical wall mount
X-LITE 15A
way 2
W 800/200
@-6dB 42Hz - 20KHz inch 15 - 2.5 coil inch 1 - 1.4 coil dB 128
H x V 90° x 60° m inch mm inch kg lb mm inch kg lb kOhm 22
XLR with loop,
Jack ST, RCA ST
3
9.8
433x706,5x400
17.04x27.81x15.74
18
39.68
520x785x480
20.47x30.90x18.89
21.5
47.39
X-LITE 15
way 2
W rms 250
W 125
W 500
Ohm 8
@-6dB 68Hz - 20KHz inch 10 / 2 coil inch 1 / 1.4 coil dB 96 dB 120 / 123
H x V 90 x 60 kHz 2,5
HP 55Hz - 12-24db/oct
FBT DLM26
2 x SPEAKON
X-LITE 15
XL-C 15
39489
XL-UH 15
38891
XL-UV 15
38904
X-LITE 10A
2
800/200
58Hz - 20KHz
10 - 2 coil
1 - 1.4 coil
126
90° x 60°
22
XLR with loop
3
9.8
300x536x301,5
11.81x21.10x11.87
13
28.66
380x630x380
14.96x24.80x14.96
15.6
34.39
X-LITE 10
2
400
200
800
8
53Hz - 20KHz
15 / 2.5 coil
1 / 1.4 coil
98
123 / 126
90 x 60
1,8
HP40Hz - 12-24db/oct
FBT DLM26
2 x SPEAKON
300x536x301,5
11.81x21.10x11.87
12.5
27.5
380x630x380
14.96x24.80x14.96
14.5
31.9
X-LITE 10
XL-C 10
39491
XL-UH 10
38889
XL-UV 10
38902
X-LITE 12A
2
800/200
50Hz - 20KHz
12 - 2 coil
1 - 1.4 coil
127
90° x 60°
22
XLR with loop
3
9.8
356x619x357
14.01x24.37x14.05
14.5
31.96
450x720x450
17.71x28.34x17.71
16.9
37.25
X-LITE 12
2
300
150
600
8
56Hz - 20KHz
12 / 2 coil
1 / 1.4 coil
97
122 / 125
90 x 60
2
HP 45Hz - 12-24db/oct
FBT DLM26
2 x SPEAKON
356x619x357
14.01x24.37x14.05
14
30.8
450x720x450
17.71x28.34x17.71
16.4
36.1
X-LITE 12
XL-C 12
39490
XL-UH 12
38890
XL-UV 12
38903
INTEGRATED
SOUND
SYSTEMS
67
Amico
INTEGRATED SOUND SYSTEM
AMICO 10USB
AMICO 10USB is a completely integrated, ready-wired sound system offering a convenient plug and play solution for Houses of Worship, schools, conference halls, DJ sets, sports centers and small musical groups performing live in small to medium sized venues.
The mixer, amplification and subwoofer are contained in a single ultra lightweight, yet extremely sturdy polypropylene enclosure. A storage compartment in the rear of the AMICO 10USB houses the two 2- way satellite speakers, allowing the wheeled system to be transported as a one piece unit. AMICO 10USB offers a professional mixing input channels with built-in class D power amplifiers and switch mode power supply. The system is powered by AC mains.
• Analog audio processor with 24dB/oct electronic crossover network and ADAP (Advanced Dynamic Active Protection) for total protection of the components
• 3 Class D power amplifiers with switch mode power supplies to power the subwoofer and the two satellite speakers
• Built-in mixing console with 6 x XLR mic inputs with phantom power supply, 2 x mono inputs and 4 x stereo input channels, 3-band EQ, 99 selectable digital effects with effects send and return controls
• USB input/output to play back music programs/ files from a computer or to record from the master audio output of the
AMICO 10 USB to a computer-recording program
• A quick and easy set-up: complete system setup in less than 5 minutes! Just connect the satellite speakers to the AMICO 10USB amplifier outputs using the optional
Speakon speaker cables and connect the AC power cable to an AC wall outlet
• Multi-function knobs to block, unblock, and remove the cover/ lid transport handle
• Removable back panel for access to the satellite speakers’ storage compartment.
The back panel protects the satellite speakers and keeps them secure when transporting the complete system
INTEGRATED SOUND SYSTEM
AMICO 10USB
Amico 10USB
Processed Active Sound System
500W+2x150W RMS - 130dB total SPL
•
3-way. tri-amplified Bass-Reflex system
•
14 channel mixer with 99 presets digital
multieffect and phantom power
•
USB connection for music programs in play and record
• USB input/output to play back music programs/ files from a computer or to record from the master audio output of the AMICO
10USB to a computer - recording program
• Subwoofer: 380 mm (15”) high efficiency and high excursion custom woofer with a
75 mm (3”) voice coil
• 2 x Two way satellite speakers: featuring
165 mm (6.5”) woofers with 38 mm (1.5”) voice coils, and a 25 mm (1”) compression driver coupled to a 90°H x 60°V constant directivity horn
• 500W RMS Class D amplifier for subwoofer
• 2 x 150W RMS Class D amplifier for the satellite speakers
•
Switch mode power supply
69
Model
Configuration
Internal Amplifiers
MIXER
Quantity and type
Impedance
Max input signal
Max gain
Equivalent input noise
CMRR (@ main out, gain 75dB)
Quantity and type
Impedance
Max input signal
Max gain (@ main out)
High Shelving (@ 12kHz)
Medium Peaking (@ 2.5kHz)
Low Shelving (@ 80Hz)
Quantity and type
Impedance
Max input signal
Max gain
Equivalent input noise
CMRR (@ main out, gain 75dB)
Quantity and type
Impedance
Max input signal
Max gain (@ main out )
High Shelving (@ 12kHz)
Medium Peaking (@ 2.5kHz)
Low Shelving (@ 80Hz)
Impedance
Mx output (Monitor, Eff, Tape In)
Distortion + Noise @ 16
Signal/Noise ratio
Frequency response (@ 0 / -1dB)
Sample frequency
Frequency response
AMICO 10 USB
3 WAY / SUB+2SAT
W RMS 500 + 2x150 channels
2mono+4stereo
2 x XLR F kohm 2.2
dBu 0 dB 75 dB -128 dB -80
2 x JACK balanced kohm 33 dBu 30 dB 40 dB ±15 dB ±12 dB ±15
4 x XLR F kohm 22 dBu 0 dB 75 dB -128 dB -80
8 x JACK balanced kohm 22 dBu 30 dB 18 dB ±15 dB ±12 dB ±15 ohms 600 dBu 22 dBu 0.025% dB 96
20Hz-20kHz kHz 48
20Hz-20kHz
V44
Code 23373
Nylon cover
SUB / COMBO
Configuration
Internal amplifier
Frequency response
Sensitivity (@1W, 1m)
Maximum SPL (cont-peak)
Dispersion
Low frequency woofer
High frequency driver
SAT output connectors
SAT
Internal amplifier / Recommended
Impedance
Frequency response
Sensitivity (@1W, 1m)
Maximum SPL (cont-peak)
Dispersion
Low frequency woofer
High frequency driver
Input connectors
Power supply cable
Net dimensions
(WxHxD)
Net weight
Transport dimensions
(WxHxD)
Transport weight
Optional accessories
Way 1
W RMS 500WSUB+2x150WSAT
@-6dB 40Hz-120Hz dB 97 dB 124/130
O x V omnidirectional inch 1x15 inch -
2 x SPEAKON
2
W RMS 150 ohms 4
-6dB 90Hz-20kHz dB 93.5
dB 115/125
O x V 90° x 60° inch 1x6.5
inch 1x1
1 x SPEAKON m / inch 5/197
mm inch
478x780x433
18.8x30.7x17
Kg / Lb 34 / 74 mm inch
570x880x570
22.4x36.5x22.4
Kg / Lb 38 / 81.6
Carrying cover, twin cables, 2 aluminium stands
Amico Kit
Code 20698
Optional carrying bag, speaker stands, speakon-speakon cables
TOUR TOUGH BUILT, SLEEK DESIGN,
IMPRESSIVE SPECS, EXCELLENT COST PER
WATT PERFORMANCE, EFFICIENT UNDER
ANY APPLICATION
With these credentials, FBT proudly presents the new AX series of power amplifiers, the perfect power mates for sound reinforcement speaker systems. The AX series consists in four 2HU rack mount models, from 800 to
3000 watts, all designed with sophisticated power amp circuits for improved quality, stability and reliability, all equipped with
Stereo-Parallel-Bridge operation mode, dB sensitivity switch (26-29-32dB), limiter, ground lift, XLR/Jack inputs (plus extra RCA input on
AX 800), Speakon/Binding posts outputs.
APPLICATIONS
Amplification for live sound reinforcement speaker systems in clubs, discos, piano bar, conference halls, houses of worship, sports arenas, schools, theatres, mobile D.J. use, recording studio monitors, foreground music reproduction, etc.
Model
Both channels driven
Stereo Continuous
8ohm /Impulsive
Both channels driven
Stereo Continuous
4ohm /Impulsive
Bridge 8ohm
Continuous / Impulsive
Frequency Response
Class
Signal to noise ratio
THD
Damping factor
Input Impedance
Protections
Power Supply
Power Consumption
Connectors
Dimensions (WxHxD)
AX 800
1%THD
Wrms 230/250
1%THD
Wrms 350/400
W RMS 700/800
@-1dB 20Hz-40kHz
W AB
A weight >100dB
50% Pmax < 0,03%
> 400 ohm 20k balanced mm inch
Short circuit
/ Thermal
120 or 230 Vac
50/60Hz
1000 VA
IN: XRL/Jack
OUT: Speakon/
Binding post
482x88x290
19x3.5x11.4
AX 1200
340/350
460/600
920/1200
20Hz-40kHz
H - 2 step
>100dB
< 0,03%
> 400
20k balanced
Short circuit
/ Thermal
120 or 230 Vac
50/60Hz
1300 VA
IN: XRL/Jack
OUT: Speakon/
Binding post
482x88x290
19x3.5x11.4
AX 2000
630/650
840/1000
1680/2000
20Hz-40kHz
H - 2 step
>100dB
< 0,03%
> 400
20k balanced
Short circuit
/ Thermal
120 or 230 Vac
50/60Hz
2400 VA
IN: XRL/Jack
OUT: Speakon/
Binding post
482x88x290
19x3.5x11.4
AX 3000
880/650
1300/1500
2600/3000
20Hz-40kHz
H - 2 step
>100dB
< 0,03%
> 230
20k balanced
Short circuit
/ Thermal
120 or 230 Vac
50/60Hz
3600 VA
IN: XRL/Jack
OUT: Speakon
482x88x290
19x3.5x11.4
71
The DMM 8008 is a high performance 8 input x
8 output digital matrix mixer; Specially designed for commercial and professional application such as Conference rooms, Auditoriums, Sport utility buildings, House of worship, Pubs and Disco.
It includes 8 independently switchable Line/
Mic inputs with Phantom power supply, 8 Line outputs, managed by a powerful 48kHz 24 Bit
DSP engine, in addition to high performance 24
Bit AD/DA converters. The DMM 8008 supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output.
Each Mic/Line input channel provides Lo/Hi pass
1st order filters, 3-band parametric EQ, Noise
Gate function and Gain control. In addition Mic inputs include a Feedback Eliminator function, based on a powerful «Pitch Shifting» algorithm, particularly suitable for voice applications.
Automixing function automatically adjusts input level to make operating easier using either NOM
(Number of Open Mics) attenuation function or Gain sharing algorithm. In addition Ducking process enforces a «priority order» of open microphones in order that high-priority inputs attenuate lower-priority inputs. Each output offers up to 5-band of parametric equalization, crossover filters, RMS compressor, Peak limiter,
Phase and Delay controls; 8 digital In/Out ports are provided for general purpose (preset recall, trigger third parts or device); 8 front knobs provides a quickly way to control input Gain;
Up to 32 units can be managed by software applications.
72
3 AVAILABLE MODE TO MANAGE THE DMM 8008
Via RS 485 / TCP-IP / USB
PC software for system design and real time control.
Via TCP-IP
Free software application available for iPad®.
Via RS 485
Optional Wall Control Panel WP 8008 configurable for global or single zone control.
DMM 8008
• Excellent audio performance with 24 bit converters coupled with 48kHz sample rate
• 8 Mic/Line inputs, 8 outputs with full matrix mixing, 3 band parametric equalization and
Low/High pass filters per input channel
• 5 band parametric equalization per output channel; each band can be switched to peaking, Low/High shelving with variable Q response
• Crossover filters with slopes from 6dB/Octave up to 24dB/Octave including Butterworth,
Bessel, Linkwitz-Riley
• Gain control, Noise Gate, Feedback eliminator
(Mic input only) per input channel
• Each output features a precision dynamic range controller composed of a Peak Limiter and a RMS Compressor with selectable ratio and variable knee
• Automixing functions include: Configurable
NOM attenuation, Gain sharing algorithm,
Priority Ducking
• Adjustable Delay time up to 380mS per output channel
• Front panel interactive LCD display for local access and configuration
• Front panel 6-led status indicators per In/Out channel
• 8 front knobs available for Mic input Gain control
• 4 input contacts for additional 4 preset selections with priority configuration
• 4 digital output ports for triggering external devices
• Simultaneous control up to 32 units via PC software - iPad®
• Security lockout
• TCP/IP, RS 485 and USB connection for remote controls
DMM 8008
AUDIO
Analog Output
Uscite Analogiche
Maximum Input Level
Mic Input Gain
Maximum Output Level
THD+N
S/N
Frequency Response
AD & DA Converters
Phantom Power
DSP & PROCESSING
DSP Engine
DSP Resolution
Input Equalization
Output Equalization
Filter Gain
Center Frequency
Filter Q/BW
Crossover Section
HPF/LPF
RMS Compressor and Peak
Limiter
Delay
Feedback Eliminator
Automixing Functions
GENERAL
Device Presets
Front Panel
8 electronically balanced (Mic - Line - Unbalanced)
8 electronically balanced
Line: +14dBu; Mic: -20/0dBu (+6dBu unbalanced)
34dB (22dB analog, 12dB digital)
+14dBu
0.005% at 1kHz 0dBu
>104dBA
20Hz-20kHz +/-1dB
4 x AK5385B 24bit, 1 x Ak4358 24bit (48kHz)
48Vdc
Dream SAM3716, 24bit (data) x 96bit (coeff.)
24 x 32 bit for filtering process; 96bits resolution on intermediate computation results
3-band parametric selected as peaking or Low/High shelving with variable Q per input channel
Low/High pass 1st order filter per input channel
5-band parametric EQ selected as peaking or Low/High shelving with variable Q per output channel
From -12dBu up to +12dBu by 0.5dBu resolution steps
Selectable with a 1/24th of octave resolution step from 20Hz up to
20kHz
Q from 0.4 up to 10 by 0.1 resolution steps
Butterworth 6/12/18/24dB per octave
Bussel, Linkwitz-Riley and custom 12/24dB per octave
Filter resolution 1/24th of octave
Threshold from 14dBu up to -34dBu
Attack time from 5ms up to 200ms (1ms resolution up to 20ms, 10ms resolution up to 100ms and 20ms resolution up to 200ms)
Release time from 0.1 sec up to 3 sec (0.1 sec resolution)
Ratio from 1:1 to 32:1 (compressor only)
Adjustable soft or hard knee (compressor only)
380,998 ms 21 us increment/decrement steps per output channel only
Pitch shifting algorithm only for Mic input channels
NOM attenuation, Gain sharing algorithm and priority ducking processing
6 user presets + 4 by using S1-S4 digital input ports
2 x 24 character LCD display with white/blue LED backlight
6-LED status indicators (Line, Mic, Mute I/O, Signal, Clip,Limiter)
1-LED indicator Phantom power
6 x front push button (Preset recall, Setup)
USB type B connector
Rear Panel
Optional Device
Included Software
Main AC
Dimensions
Weight, Net/Shipping
2 x 12 pin Phoenix connector (Mic/Line inputs)
2 x 12 pin Phoenix connector (Line outputs)
2 x 4 pin Phoenix connector (S1-S4 digital input ports - TTL level 0-5V)
2 x 4 pin Phoenix connector (S1-S4 digital output ports - TTL level 0-5V)
2 x RJ45 for RS485 In/Out connection
1 x RJ45 with activity leds for Ethernet connection (10/100 TCP-IP)
IEC C13 16A connector; power on/off switch
FBT WP8008 wall panel control
PC users interface; Free app. for iPad®
90-240Vac (50/60Hz) - 40W
19” x 1.75” x 9” ( 483 x 44 x 229mm ) - 1RU
7.71lbs (3.5kg) / 8.82lbs (4kg)
73
74
DIGITAL
LOUDSPEAKER
MANAGEMENT
The DLM26 is a DSP based 2 input x 6 output
Digital Loudspeaker management processor, ideally suited for fixed installations and live events.
It combines the functions of a multitude of conventional products in a compact 1U unit with extensive PC remote control capabilities.
Features superb audio quality with premium hi-end
AKM5392 24bit A/D converters and AKM 4396
24bit D/A converters, carefully optimized double precision signal processing coupled with 24bit conversion ensure a dynamic range >110dB
The unit can work in STANDARD MODE or in DCL
MODE. The first mode permits to configure the crossover in 2x2 way + SUB, 2x3 way or 6way, the input L, R, L+R are freely assignable to each output.
In DCL mode the unit can be configured in 3ch
DCL, 2ch DCL + 2ch standard, 1ch DCL + 4ch standard. DCL mode means double compressor limiter, each DCL channel have a double band limiter and compressor with assignable LO/HI split frequency.
Each input has 5 fully configurable filters, a delay of 288.66ms max in step of 6.8us, gain.
Each output has 4 fully configurable filters, a delay of 288.66ms max in step of 6.8us, gain, phase, LO-pass/Hi-pass crossover from 6 to
24db/Oct with standard or custom Q, RMS compressor with soft knee and peak limiter.
The 2 input levels are displayed by rows of 6 level LED + 1 clip LED, the 6 output levels are displayed by rows of 5 level LED + 1 clip LED +
1 Limiter LED. The unit has 2 analog inputs, a stereo digital SPDIF input, and 6 analog outputs.
Linking functions between inputs and linking functions between outputs are available.
The Pc SW for the remote control via RS485 or
USB is allowing to connect in net up to 32 units and is allowing to control full parameters of the processor, to show the phase of the filter setting and to adjust graphically the RMS compressor and the Peak limiter. The comprehensive standard specification also include up to 64 memories with security lockout and two password level settings.
DLM26
Digital Loudspeaker Management
Rear panel
Special features:
• Hi-pass/Lo-pass/Shelving custom Q second order filters
• RMS compressor and PEAK limiter on each output channel with time constant and algorithm optimized for speaker thermal and mechanical protection while maximizing the output with no audible distortion
• Input channel L, R or L + R freely assignable to each output channel
• Double Compressor Limiter Mode (DCL) with two band RMS compressor and Peak limiter with adjustable HP / LP split frequency and separate parameter adj.
This is an exclusive and very useful feature in general purpose digital processors
• ALL PASS first and second order filters useful for Cardioid SUB configurations, very precise phase crossover alignment, special pattern control array, alignment between different speakers and systems
PC software screenshots
Inputs / Outputs
Total memories
THD+N
S/N
Frequency Response
A/D and D/A
Resolution
Filters (5 each in/out)
Type
Orders
Filter gain
Centre frequency
Filter Q/BW
Compressors
Threshold:
Ratio:
Soft Knee:
Attack Time:
Release Time:
Limiters
Threshold:
Attack time:
Release Time:
High pass and Low Pass
Filters
Filter’s setting step:
Maximum Delay:
Net Dimensions (WxHxD)
Net Wheight:
Transport Dimensions
(WxHxD)
Transport Weight
Voltage
Power
XLR balanced +20dbu max level
64
0.001% at 1kHz 0dBu
>110dB
20Hz - 20kHz @ -0.5db
24bits
Peaking EQ, Hi-Shelv 1/2/Q, Lo-Shelv 1/2/Q, HPF 1/2/Q, LPF
1/2/Q, All Pass 1/2 , Band pass, Notch symmetrical Bell or High/Low Shelving up to second order
-15dBu / +15dBu by 0.5dBu resolution steps selectable with a 1/24th of octave resolution steps 20Hz /
20kHz
Q from 0.05 up to 3 by 0.05 resolution steps
-10 / 20dbu
1:1 / 32:1
0 / 100%
10ms / 4s
0.1 / 3s
-10 / +20dbu
2ms / 50ms
20ms / 200ms
From 1st order (Butterworth -6dB/Oct) up to 4th Order (Butterworth, Linkwitz or Bessel -24dB/Oct), Custom Q mm inch
Kg
Lb mm inch
Kg
Lb
1/24th of octave
288.66ms by 6.8us increment/decrement step, on each Input and Output channel
480 x 40 x 220 - 19” (1U rack)
18.8x1.5x8 - 19" (1U rack)
2.8
6.1
530x100x310
20.8x3.9x12.2
3.9
8.6
90 - 240Vac 50/60Hz
30VA
75
Ventis
Nylon cover
VN-C 115
40720
Ventis 115
VN-C 112
40721
Ventis 112
VN-C 110
40722
Ventis 110
VN-C 108A
41204
Ventis 108A
VN-C 108
41205
Ventis 108
VN-C 206
40723
Ventis 206
VN-C 115M
41207
Ventis 115M
VN-C 112M
41206
Ventis 112M
Wall metal bracket to mount in horizontal position
VN-U 115
40724
Ventis 115
VN-U 112
40725
Ventis 112
VN-U 110
40726
Ventis 110
VN-U 108
41220
Ventis 108
VN-U 206
40727
Ventis 206
VN-U 115M
41296
Ventis 115M
VN-U 112M
41297
Ventis 112M
Directional wall mount bracket
AC-W 568/W
36987 Black
37330 White
Ventis 108
X-PRO
Nylon cover
XP-C 215
41234
X-PRO 215
XP-C 15
39486
X-PRO 115
XP-C 12
39487
X-PRO 112
XP-C 10
39488
X-PRO 110
Wall metal bracket to mount in horizontal position
X-P U 15
38894
X-PRO 115A
X-P U 12
38893
X-PRO 112
X-P U 10
38892
X-PRO 110
X-SUB
Nylon cover
XS-C 18S
38895
X-SUB
XS-C 18S
38896
X-SUB with wheels
XS-C 15S
41233
X-SUB 15S
XS-CH 15S
41234
X-SUB 15S with wheels
Wheels Kit
KW-X SUB
38889
X-SUB
76
Vertus
Nylon cover
VT-C 604
36122
Vertus CLA 604
VT-C 114
37145
VT-C 59
37146
Vertus VT-SC 114 VertusVT-SC 59
VT-C 208
36123
Vertus CLA 208
Pin Lock
4 pezzi
VT-P 604 Kit
36964
Vertus CLA 604
Stand adapter
ø 35mm
VT-S 604/W
35723 Black
37044 White
Vertus CLA 604A
Directional stand adapter
VT-DS 604/W
37053 Black
37054 White
Vertus CLA 604A
Directional stand adapter
VT-W 604/W
35722 Black
37043 White
Vertus CLA 604A
Stand column h 59cm
VT-SC59 604/W
36879 Black
36883 White
Vertus CLA 604A
Stand column h 114cm
VT-SC114 604/W
37041 Black
37042 White
Vertus CLA 604A
Nylon cover
VT-C 1000
41024
Vertus CS 1000
Carrying bag
VT-CB 1000
40730
Vertus CS 1000
Trolley TR-100
40912
Vertus CS 1000
Flying bar VT-F 1000
40913
VT-F 1000W
41041
Vertus CS 1000 Vertus CS 1000 white
Joint bar
VT-J 1000
40731
VT-J 1000W
41040
Vertus CS 1000 Vertus CS 1000 white
Directional
Wall mount
VT-W 1000 VT-W 1000W
40728 41039
Vertus CS 1000 Vertus CS 1000 white
SUBLine
Nylon cover
SL-C 218S
38897
Subline 218SA
SL-CH 218S
38898
Subline 218SA with wheels
SL-C 118
41225
Subline 118
SL-CH 118
41226
Subline 118 with wheels
SL-C 115
41227
Subline 215
SL-CH 115
41228
Subline 215 with wheels
SL-C 112
41229
Subline 112
4 wheels kit
2 with brake
80 mm
KW-HM 80
30423
Subline 115SA
4 wheels kit
2 with brake
100 mm
KBW-1004S
25197
Subline 118S/SA
Subline 218SA
StageMaxX
Nylon cover
SM-C 12
36065
StageMaxX 12MA
Wall metal bracket to mount in horizontal position
SM-U 12W
36066 Black
36735 White
StageMaxX 12MA
Metal bracket with top-hat speaker stand socket
SM-S 12
37099
StageMaxX 12MA
HiMaxX
Nylon cover
V 33
15777
HiMaxX 60
V 29
10186
HiMaxX 40
V 56
29486
HiMaxX 100SA
HM-CH 100
37049
Subline 100SA with wheels
Wall metal bracket to mount in horizontal position
BOX 104
15771
HiMaxX 60
BOX 100
10187
HiMaxX 40
Wall metal bracket to mount in vertical position
BOX 105
15772
HiMaxX 60
BOX 101
10188
HiMaxX 40
4 wheels kit
2 with brake
80 mm
KW-HM 80
30423
HiMaxX 100SA
77
ProMaxX
Nylon cover
V 64
33326
ProMaxX 114
ProMaxX 112
V 63
33325
ProMaxX 110
V 65
33327
ProMaxX 15 SA
PM-CH 15S
37050
ProMaxX 15 SA con ruote
BOX 128
33329
ProMaxX 114
ProMaxX 112
BOX 127
33328
ProMaxX 110
4 wheels kit
2 with brake
80 mm
KW-HM 80
30423
ProMaxX 15 SA
Evo
2
MaxX
Nylon cover
V 33
15777
Evo 2 MaxX 6
V 29
10186
Evo 2 MaxX 4
V 30
13349
Evo 2 MaxX 2
V 31
13350
Evo 2 MaxX 9 SA
78
Wall metal bracket to mount in horizontal position
BOX 104
15771
Evo
2
MaxX 6
BOX 102
10187
Evo
2
MaxX 4
BOX 102
13351
Evo
2
MaxX 2
BOX 103
13352
Evo
2
MaxX 9
Wall metal bracket to mount in horizontal position
BOX 105
15772
Evo
2
MaxX 6
BOX 101
10188
Evo
2
MaxX 4
J
Nylon cover
V 38
18614
J 15
J 12
DJ 15
V 37
18613
J 8
V 36
18612
2x J 5
Directional wall mount bracket
SJ-8/WHT
18576 Black
39177 White
J 8
SJ-5/WHT
18522 Black
38321 White
J 5
Wall metal bracket to mount in horizontal position
BOX 112
18602
J 15
J 12
SJ-8U/WHT
18568 Black
38464 White
J 8
SJ-5U/WHT
18523 Black
38465 White
J 5
Adjustable metal T stand for
No. 2
SJ-8T
18569 Black
J 8
SJ-5T
18527 Black
J 5
Adapter
35mm
AJ-8
18570 Black
J 8
AJ-5
18532 Black
J 5
Metal frame for ceiling/wall installation
SJ-5C W
18526 White
J 5
X-LITE
Nylon cover
XL-C 15
39489
X-LITE 15
XL-C 12
39490
X-LITE 12
XL-C 10
39491
X-LITE 11
Wall metal bracket to mount in horizontal position
XL-UH 15
38891
X-LITE 15
XL-UH 12
38890
X-LITE 12
XL-UH 10
38889
X-LITE 10
Wall metal bracket to mount in horizontal position
XL-UV 15
38904
X-LITE 15
XL-UV 12
38893
X-LITE 12
XL-UV 10
38902
X-LITE 10
AMICO
Nylon cover
V 44
23373
Amico 10 USB
ACCESSORIES
AVAILABLE
FOR ALL
PRODUCTS
Wall mount heavy-duty steel speaker bracket
WMA 560BK
39332
Tripod speaker stand
MSA 300BK MSA 310BK MSA 325BK
39326 39327 39328
Microphone stand
MSA 400BK DTA 500BK MSA 100BK MSA 200BK
39324 39325 39321 39322
MSA 180BK
39323
Telescopic speaker pole
MSA 210BK
39329
MSA 220BK
39330
Speaker stand bag
MSA BAG
39331
PROFESSIONAL CABLES
NC3FXX
NC3MXX
Balanced Signal
Cables
XMF-05
39728
Lenght 0.5mt
XMF-01
39729
Lenght 1mt
XMF-10
39733
Lenght 10mt
XMF-15
39734
Lenght 15mt
XMF-02
39730
Lenght 2mt
XMF-03
39731
Lenght 3mt
XMF-20
39735
Lenght 20mt
XMF-30
39736
Lenght 30mt
XMF-06
39732
Lenght 6mt
PMF-05
39409
Lenght 0.5mt
PMF-1
39408
Lenght 1mt
PMF-2
37893
Lenght 2mt
PowerCON
TRUE1
NAC3MX
NAC3FX
PowerCON
TRUE1
NAC3MX
NAC3FX
(UL series)
PowerCON
NAC3FCA
NAC3FCB
PowerCON
NAC3FCA
NAC3FCB
(UL series)
SpeakON
NL4FX
NL4MMX
PMF-05 UL
39651
Lenght 0.5mt
PMF-1 UL
39652
Lenght 1mt
PMF-2 UL
39653
Lenght 2mt
PAB-025 UL
39658
Lenght 0.25mt
PAB-05 UL
39657
Lenght 0.5mt
PAB-1 UL
36642
Lenght 1mt
PAB-2 UL
37303
Lenght 2mt
PAB-025
36645
Lenght 0.25mt
PAB-05
36644
Lenght 0.5mt
PAB-1
36643
Lenght 1mt
SP4-025
39754
Lenght 0.25mt
SP4-05
39755
Lenght 0.5mt
SP4-2
39756
Lenght 2mt
Lockable 4 pole speakON adapter
39772
PAB-2
37892
Lenght 2mt
SP4-10
39757
Lenght 10mt
SP4-20
39758
Lenght 20mt
79
FBT Elettronica SpA has the right to amend products and specifications without notice.
ALPS
TM
, B&C and Neutrik
TM
are the trademarks of their respective owners.
Graphics
Studio Conti
Photography
Giuseppe Saluzzi
Printing
Tecnostampa - Loreto
Date of printing: March 2017
A technological know-how that extends from research to planning, from electronics to design, from wood to metal, from plastics to painting. A highly innovative product and a manufacturing process determined by a strict final electronic testing.
FBT Elettronica SpA
62019 Recanati (MC) - Italy
Tel: +39 071 750591
Fax: +39 071 7505920
[email protected] - www.fbt.it
(International Headquarter - Factory)
FBT Audio (UK) Ltd
Rochester, Kent, UK
Tel: 0203 598 5162
Fax: 0203 598 5163
www.fbtaudio.co.uk
Distribuited by
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
Related manuals
advertisement