TABLE OF CONTENTS 2 TABLE OF CONTENTS NEW PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 XANTECH SYSTEM APPLICATIONS . . . . . . . . . . . . . . . . . . . . . .5 REMOTE CONTROL SWITCHERS 680-10 Remote AC Switcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 AC1 Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 AC2 Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 CONTROLLERS RS41AV IR Remote Control Audio/Video Switcher . . . . . . . . . . . . . . .20 URC2P/RP Programmable Learning Remote - Platinum . . . . . . . . . . . . .10 686-10 Remote Speaker Switcher . . . . . . . . . . . . . . . . . . . . . . . . . 20 URC2P Programmable Learning Remote - Platinum . . . . . . . . . . . . .10 CC62 Remote Relay Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 URC2B Programmable Learning Remote - Black . . . . . . . . . . . . . . .10 CC12 Remote Relay Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 DD4 Dragon Drop-IR™ Programming Software . . . . . . . . . . . . . .11 RGC11 Remote Gain Control Module . . . . . . . . . . . . . . . . . . . . . . . .21 DD4 UPGRD Upgrades previous Dragon Drop-IR™ versions . . . . . . . . . .11 SR21 Remote A/B Speaker Relay Module . . . . . . . . . . . . . . . . . . .21 590-10 Programmable Controller . . . . . . . . . . . . . . . . . . . . . . . . . . .12 RT16-10 Addressable IR Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 598-00 Keypad for 590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 RT8 One x Eight Addressable IR Router . . . . . . . . . . . . . . . . . . .22 599-00 Pulsed Switching Module . . . . . . . . . . . . . . . . . . . . . . . . . .12 MODULES AND CONNECTING BLOCKS AMPLIFIERS IRS232A IR to RS232 Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 AV61 Audio/Video Six-Way Distribution Amplifier . . . . . . . . . . . . .13 IRS232 IR to RS232 Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 RP41AV IR Remote Control Audio/Video Preamp . . . . . . . . . . . . . . . .13 RS232IR RS232 to IR Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 MAC1 Mini-Macronizer™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 IR RECEIVERS IR-DC4 IR to RS232 Interface for Arrakis DC-4 . . . . . . . . . . . . . . . .23 480B-00 Dinky Link™ - Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 IR-X10 Lighting Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 480W-00 Dinky Link™ - White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 CB12 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 480B-30/RP Dinky Link™ Quick Connect - Black . . . . . . . . . . . . . . . . . . .14 CB18 Strip-IR™ Parallel Connecting Block . . . . . . . . . . . . . . . . . .24 480W-30 Dinky Link™ Quick Connect - White . . . . . . . . . . . . . . . . . .14 CB20 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 480B-KIT Dinky Link™ Quick Connect Kit - Black . . . . . . . . . . . . . . . .14 CB60 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 480W-KIT Dinky Link™ Quick Connect Kit - White . . . . . . . . . . . . . . . .14 CBCSM1 CSM1 Current Sensor Connecting Block . . . . . . . . . . . . . . .24 480-80B Dinky Link™ CFL Friendly - Black . . . . . . . . . . . . . . . . . . . . .14 CSM1 Current Sensing Module . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 480-80W Dinky Link™ CFL Friendly - White . . . . . . . . . . . . . . . . . . . .14 789-44 One Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .25 490-00 Micro Link™ - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 789-44PS/RP Connecting Block and Power Supply . . . . . . . . . . . . . . . . . .25 490W-00 Micro Link™ - White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 789-44D One-Zone In-Wall Connecting Block . . . . . . . . . . . . . . . . . . .25 490DW-00 J-Box Micro Link™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 790-00 Multiple Emitter Connecting Block . . . . . . . . . . . . . . . . . . . .25 490-30/RP Micro Link™ Quick Connect - Brass . . . . . . . . . . . . . . . . . .15 791-44 One-Zone Amplified Connecting Block . . . . . . . . . . . . . . . . .25 490-KIT/RP Micro Link™ Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 792-10 Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 490W-30 Micro Link™ Quick Connect - White . . . . . . . . . . . . . . . . . .15 793-10 Serial Control Combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 490-90 Plasma-Friendly Micro Link™ . . . . . . . . . . . . . . . . . . . . . . . .15 794 / 797 Universal Interface Modules . . . . . . . . . . . . . . . . . . . . . . . .26 780-10/RP J-Box Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 795-20 Four-Zone Amplified Connecting Block . . . . . . . . . . . . . . . .26 780-80 J-Box Receiver CFL Friendly . . . . . . . . . . . . . . . . . . . . . . . .16 796-20 Six-Zone Connecting Block / Expander . . . . . . . . . . . . . . . . .27 291-10/RP Hidden Link™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 ZC21 Two-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .27 291-KIT/RP Hidden Link™ Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 291-80 Hidden Link™ CFL Friendly . . . . . . . . . . . . . . . . . . . . . . . . .17 EMITTERS 172-94/RP Xtra Link2™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 282M/RP Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 172-94X/RP Xtra Link2™ Xpansion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .18 283M Blink-IR™ Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . .28 172-77 Xtra Link2™ European . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 283MW Blink-IR™ Emitter Mini-Wire . . . . . . . . . . . . . . . . . . . . . . . .28 172-78 Xtra Link2™ United Kingdom . . . . . . . . . . . . . . . . . . . . . . . .18 284M Dual Mini Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 286M Dual Blink-IR™ Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . .28 MS1 Mouse Emitter Shield Cover . . . . . . . . . . . . . . . . . . . . . . . . .28 ‘RP’ model number suffix indicates retail packaging. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF VOLUME CONTROLS 202-00 Four-Way RF Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 760-00/RP Match Maker™ Speaker Volume Controller - White . . . . . .29 203-00 DC Blocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 VCIR/RP Match Maker™ Speaker Volume Control w/IR Rec - White .29 784-00 Emitter Extension Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 VCIR-CFL CFL Match Maker™ Speaker Vol Cntlr w/IR Rec - White . . .29 ODC2 Outdoor Device Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 RAT1 IR Controller Remote Auto Transformer . . . . . . . . . . . . . . . .30 SUN480 Sunscreen Filter for 480 Dinky Link Receiver . . . . . . . . . . . .32 MIRV1 Motorized IR Volume Controller - White . . . . . . . . . . . . . . . .30 SUN490 Sunscreen Filter for 490 Micro Link Receiver . . . . . . . . . . .32 SUN780 Sunscreen Filter for 780 J-Box Rec. and VCIR . . . . . . . . . . .32 ACCESSORIES TUBE490 Light Isolation Extension Tube for 490 . . . . . . . . . . . . . . . . .32 RC68+ IR Remote Programmer . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 3016400 Dark Purple 780 Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 781RG Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 3022000 Decora™ Style Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 782-00 High Current Power Supply . . . . . . . . . . . . . . . . . . . . . . . . .31 3022490 Decora™ Style Insert for 490 . . . . . . . . . . . . . . . . . . . . . . . .33 786-00 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 6015900 Five-Foot Mini Plug Cable . . . . . . . . . . . . . . . . . . . . . . . . . .33 634-00 Ground Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 6017400 One-Foot Mono Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 INJ94 RF/IR Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 6017440 Adapter Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 CPL94B RF/IR Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 6017450 10-Foot Mono Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 CPL10 RF/IR Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 SLB2 Dual-Gang Plastic Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 BYPASS94 Bypass Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 LV1 Single-Gang Plastic Retro Ring . . . . . . . . . . . . . . . . . . . . . .33 BYPASS77 Bypass Kit (European) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 LV2 Double-Gang Plastic Retro Ring . . . . . . . . . . . . . . . . . . . . . .33 TEST-IR Test-IR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 799-00 Help-IR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 200-00 Two-Way RF Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 INDEX BY MODEL NUMBER . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 FOR WHOLE-HOUSE AUDIO/VIDEO ENTERTAINMENT PRODUCTS, SEE THE WAVE™ PRODUCTS CATALOG 2003 AND THE MRC44 AND MRC88 PRODUCT BROCHURES. ‘RP’ model number suffix indicates retail packaging. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 3 TABLE OF CONTENTS TABLE OF CONTENTS NEW PRODUCTS 4 NEW PRODUCTS The 490-90 Plasma-Friendly Micro Link™ IR Receiver rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception. Patent pending. SEE PAGE SEE PAGE 16 FOR MORE INFORMATION 15 FOR MORE INFORMATION The CBCSM1 CSM1 Current Sensor Connecting Block allows the Xantech CSM1 Current Sensor to be used as a general purpose current sensor to sense the power state of a component and to generate a status signal that can be used to control other equipment. SEE PAGE The 780-90 Plasma-Friendly J-Box IR Receiver rejects interference from plasma displays, direct sunlight and fluorescent tube lights for accurate IR signal reception. Patent pending. 24 FOR MORE INFORMATION The IRS232A, a new and improved version or our IR to RS232 Module, not only provides IR control of advanced components such as projectors and lighting systems that would normally be controlled via RS232, it now has selectable baud rates, data bits, stop bits and parity plus the ability to output HEX commands in addition to ASCII. SEE PAGE 23 FOR MORE INFORMATION 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 1. SIMPLE SINGLE-ROOM IR REPEATER SYSTEM allows IR control when A/V components are hidden in a cabinet or closet. Product: 291KIT 789-44 CONNECTING BLOCK EMITTERS A/V EQUIPMENT 291-10 IR RECEIVER IR REC IR IN PWR 286M DUAL BLINK-IR 781RG POWER SUPPLY EMITTERS 2. SIMPLE MULTI-ROOM IR REPEATER SYSTEM to be used when controlling IR remote controllable A/V components located in another room. Product: 283M Blink-IR™ Emitters A/V EQUIPMENT 780-10 IR RECEIVER 789-44 Connecting Block 781RG Power Supply 789-44 780-10 IR Receiver CONNECTING BLOCK IR REC IR IN PWR 283M BLINK-IR 781RG POWER SUPPLY 3. MULTI-ROOM SINGLE-ZONE SYSTEM for whole-house A/V distribution, combining IR signals with RF distribution over existing coax. Product: 172-94 Xtra Link 172-94 Xtra Link Expansion Kit 291-00 IR RECEIVER 781C POWER SUPPLY TV INJ94 RF/IR INJECTOR 291-00 IR RECEIVER TV SATELLITE RECEIVER RF IN RF OUT RF IN RF OUT 781C POWER SUPPLY INJ94 RF/IR INJECTOR VCR 200-00 TW0-WAY RF SPLITTER EMITTER CPL94B RF/IR COUPLER 200-00 TW0-WAY RF SPLITTER TV 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 5 XANTECH SYSTEM APPLICATIONS XANTECH SYSTEM APPLICATIONS 4. MULTI-ROOM, SINGLE-ZONE WHOLE-HOUSE INTEGRATION for whole-house A/V distribution and integration. Product: 794-50 Universal Interface Module RS232IR RS232 to IR Module IRS232 IR to RS232 Module MAC1 Mini-Macronizer™ 283M Blink-IR™ Emitters 490-90 Plasma-Friendly Micro Link™ IR Receiver 791-44 Amplified Connecting Block 780-10 J-Box IR Receiver 780-10 781RG IR to RS232 Module SmartPad Keypad IR RECEIVER IR-X10 IR to X10 Interface Module RS232IR RS232 to IR MODULE A/V EQUIPMENT RS232IR RS232 TO IR MODULE 781RG POWER SUPPLY IR OUT MAC1 MINIMACRONIZER RS232 IN 283M BLINK-IR 794-50 UNIVERSAL INTERFACE MODULE TO REMOTE ROOM INPUT ON A MARANTZ RECEIVER MAC1 MINI-MACRONIZER IN EMITTERS OUT PWR SMARTPAD KEYPAD CD VCR AM/FM GLOBAL OFF MUTE CATV TAPE LD CAM SAT TUNER TNR VOL TNR VOL IR IN IR OUT IR IN 791-44 AMPLIFIED CONNECTING BLOCK IRS232A IR TO RS232 MODULE IR IN RS232 OUT IR REC IRS232 IR to RS232 MODULE 490-90 PLASMA-FRIENDLY MICRO LINK TO RS232 CONTROLLED DEVICE IN OUT TO X10 POWER LINE INTERFACE IR-X10 INTERFACE MODULE Plasma Screen 5. MULTI-ROOM AND LOCAL CONTROL to be used when controlling IR remote controllable A/V components located in another room and components in the same room. Product: 283M Blink-IR™ Emitters 791-44 Amplified Connecting Block 789-44 Connecting Block 781RG Power Supply 781RG Power Supply 286M Dual Blink-IR™ Emitters 480-30 Dinky Link™ Receiver SmartPad Keypad 283M Blink-IR™ Emitters 490-90 Plasma-Friendly Micro Link™ Receiver 480-30 DINKY LINK A/V EQUIPMENT LOCAL ROOM 789-44 CONNECTING BLOCK EMITTERS IR REC 781RG POWER SUPPLY IR IN CD VCR PWR 283M BLINK-IR 781RG POWER SUPPLY EQUIPMENT CLOSET AM/FM GLOBAL OFF MUTE CATV TAPE LD CAM SAT TUNER TNR VOL TNR VOL PWR 791-44 AMPLIFIED CONNECTING BLOCK EMITTERS XANTECH SYSTEM APPLICATIONS 6 XANTECH SYSTEM APPLICATIONS SMARTPAD KEYPAD IR IR REC 490-90 PLASMA-FRIENDLY MICRO LINK 286M DUAL BLINK-IR Plasma Screen Digital Satellite System 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 6. MULTI-ZONE, MULTI-SOURCE A/V DISTRIBUTION AND CONTROL SYSTEM using standard A/V receivers and source components. This type of system gives each zone independent power, source selection, volume and tuner control using IR Repeaters and SmartPads. Product: 795-20 Four-Zone Amplified Connecting Block SmartPad Keypad 286M Dual Blink-IR™ Emitters CB12 Connecting Block 283M Blink-IR™ IR Emitters 291-10 IR Receiver AV61 A/V Six-Way Distribution Amp 490-90 Plasma-Friendly Micro Link™ Receiver 480-80 Dinky-Link™ Receiver 780-90 Plasma-Friendly J-Box Receiver 490-90 PLASMA-FRIENDLY MICRO LINK 480-80 DINKY LINK 795-20 FOUR-ZONE AMPLIFIED CONNECTING BLOCK COMMON EMITTERS 286M DUAL BLINK-IR ZONE IR INPUTS ZONE EMITTERS 4 3 2 1 1 2 3 4 POWER 780-90 PLASMAFRIENDLY IR RECEIVER 283M BLINK-IR A/V SOURCE COMPONENTS SMARTPAD KEYPAD CD A/V RECEIVERS VCR AM/FM GLOBAL OFF MUTE CATV TAPE LD CAM SAT TUNER TNR VOL TNR VOL 291-10 IR RECEIVER AV61 A/V SIX-WAY DISTRIBUTION AMP 283M BLINK-IR OUT IR RCVR CB12 CONNECTING BLOCK 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 7 XANTECH SYSTEM APPLICATIONS XANTECH SYSTEM APPLICATIONS 7. IR TO CONTACT-CLOSURE FOR HOME CONTROL Product: CC12 Remote Relay Module 283M IR Emitter CC62 Remote Relay Module 780-90 Plasma-Friendly IR Receiver SmartPad Keypads 791-44 Amplified Connecting Block A/V EQUIPMENT 781RG Power Supply 781RG POWER SUPPLY CD VCR AM/FM GLOBAL OFF MUTE CATV TAPE LD CAM SAT TUNER TNR VOL TNR VOL CC12 REMOTE RELAY MODULE OUT IN 283M BLINK-IR Drop Screen EMITTERS PWR Projector Lift SMARTPAD KEYPAD IR 780-90 PLASMA-FRIENDLY IR RECEIVER IR REC CC62 REMOTE RELAY MODULE 791-44 AMPLIFIED CONNECTING BLOCK IN OUT TV Lift Lighting Drapes 8. IR ROUTING SYSTEM for use in home theater systems or commercial applications such as sports bars for controlling multiple TV’s, satellite receiver or any multiple same-brand, same-model components. Product: RT8 Addressable Router 781RG Power Supply 782 Power Supply SmartPad Keypad 283M Blink-IR™ Emitters 780-90 Plasma-Friendly IR Receiver 791-44 Amplified Connecting Block TV TV TV TV RT8 ADDRESSABLE IR ROUTER IR REC ADDRESSABLE IR EMITTER OUTPUTS 782 POWER SUPPLY PWR A/V EQUIPMENT 781RG POWER SUPPLY PWR EMITTERS XANTECH SYSTEM APPLICATIONS 8 XANTECH SYSTEM APPLICATIONS IR 283M BLINK-IR IR REC CD VCR 791-44 AMPLIFIED CONNECTING BLOCK 780-90 PLASMA-FRIENDLY IR RECEIVER AM/FM GLOBAL OFF MUTE CATV TAPE LD CAM SAT TUNER TNR VOL TNR VOL SMARTPAD KEYPAD 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 9. MODEL HOME CONTROL using contact-closure to IR. Product: 590-10 Programmable Controller 791-44 Amplified Connecting Block 599-00 Pulsed Switching Module 781RG Power Supply 786-00 Power Supply 782 Power Supply 283M Emitters A/V EQUIPMENT 781RG POWER SUPPLY 590-10 PROGRAMMABLE CONTROLLER PWR 283M BLINK-IR EMITTERS 590-10 PROGRAMMABLE CONTROLLER IR OUT IR + IR REC TV CONTACT CLOSURE INPUTS _ 782 POWER SUPPLY PWR 791-44 AMPLIFIED CONNECTING BLOCK Contact closure triggered by a push button to initiate an A/V demo 599-00 PULSED SWITCHING MODULE OUT IN Wall switch controlled AC outlet Contact closure triggered by a door opening initiates background music in room 786-00 POWER SUPPLY 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 9 XANTECH SYSTEM APPLICATIONS XANTECH SYSTEM APPLICATIONS CONTROLLERS 10 URC-2P/RP PROGRAMMABLE HAND-HELD CONTROLLER Xantech introduces a hand-held remote companion for the SmartPad keypad series. The hand-held that you use with one hand. One that works the way the user thinks. Pick it up and start using it. No complex readouts, menus, icons, or multifunction rollers. FEATURES • Intuitive. Easy to understand and operate immediately • Can be operated with one hand and automatically illuminates when moved • Eight source select and 40 basic function buttons • All buttons can be programmed for individual commands or macros • Programmable manually or with Dragon Drop-IR™ v4 software • Cloneable through Dragon Drop-IR™ v4 software • Comes with six overlays for the lower 12 buttons • URC2P - Platinum remote only (no retail packaging, software or cable) • URC2B - Black remote only (no retail packaging, software or cable) Using Xantech’s exclusive Dragon Drop-IR™ software makes programming the URC-2P as easy as it is with the SmartPad series. Any button can be programmed to perform sophisticated sequences with the ease of a mouse click. Drop the screen, lower the lights, and play the DVD. All with one button. The URC-2P can work in conjunction with SmartPad3 keypads. It can be programmed to control the keypad bank tracking functions. The user selects a particular bank on the remote and the in-wall keypad tracks the URC-2P’s selection. All other remotes, available today, lack the capability of encoding IR macros under every button. This limits the flexibility when designing a home theater or multi-room system. All buttons on the URC-2P, including the important bank select buttons are capable of storing the necessary macros for automating the user requests. Ergonomics played a part in the URC-2P’s design. It’s a remote capable of being operated by a single hand. It is easy to operate without a multi-page instruction manual. It’s intuitive when first placed in the user’s hand and not intimidating to the home owner. Yet, the URC-2P conceals underneath its simple exterior, a very powerful and flexible processor. The user instantly feels familiar with its fit and function and immediately begins to control all of the components. The majority of the most used functions are within thumb access from the same hand that is holding the unit. A growing number of our customers consist of the “baby boomer” generation. Eyesight must be considered in the operation of remotes. Users want to watch the screen and control the remote without wearing reading glasses. The URC-2P addresses this issue with simple, tactile feedback. In addition, all the remote buttons are back lit with a unique method of motion detection that activates the back lighting whenever the remote is moved. Today, most of the direction is to the larger, touch screen remotes. The URC-2P is a small hand-held remote that is extremely powerful in its internal processing and storage capabilities. We bury these complex programs under the buttons making the actual use a very simple, intuitive experience. It can be as easy as picking up the remote, selecting a source, and pushing a button. All other functions are carried out by macros buried inside. SPECIFICATIONS • Memory: 32 kbytes SRAM (super cap. backed) • IR Carrier Frequency: 31.25 kHz to 71.50 kHz • Range: Up to 70’ (Depends on controlled equipment and local conditions) • Number of Keys: 48 (eight-Source, 40-Function) • Learning System: Direct Learning or by PC with DD4 Software (optional). Similar to SmartPad3 • Programming Functions: Sequencing, Delays, Step Editing (with Insert and Delete) • Sequence (macro) Capability: Commands per key limited only by memory • COM Port: 3-Pin, RS232 Signal Compatible • Cloning: Via 3-Pin COM Port • Sleep Mode: Backlighting variable from 1 to 10 seconds,programmable from Dragon Drop-IR™. Begins 30 seconds after inactivity when in Program Mode • Wake up: Activates with motion, a key press, or COM Port Connection • Power Source: 4 “AAA” Batteries (Alkaline recommended - not included) • Dimensions: 7-3/4” x 2-3/8” x 1-1/16” (196 mm x 60 mm x 27 mm) • Weight: 6.6 oz. (.93 kg) TREB BASS BAL MUTE MUTE OFF GLOBAL OFF ON DRAPE 1 DRAPE 2 LIGHTS 1 LIGHTS 2 ON ON OFF OFF REAR CENTER DELAY SUB SURR MODE SLEEP TEST PGM CANCEL DEL XFER SEQ DELAY EDIT STEP PIP CH FREEZE SWAP SLEEP OFF DISP MODE URC2 OVERLAYS 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF Using the Dragon Drop-IR™ software you can program the SmartPad3, SmartPad LCD, WaterPad, URC-2P, MRC44, MRC88, 590-10, IRS232, IRS232A, RS232IR and the MAC1 with the speed and efficiency of your PC. The Dragon Drop-IR™ system consists of a Windows® based software program and an IR/PC interface module. With the ease and speed of Windows®, “drag and drop” IR commands to control your favorite brands of components onto virtual Xantech Dragon Drop-IR™ programmable products. Create single, dual or triple-gang keypads, program in the brand and type of component, and then choose the functions. Create a series of working palettes from your personally created library of IR codes. Position these palettes along side our virtual SmartPad3 and click the functions onto the Pad. Once the virtual keypad is programmed, it can be transferred to the ‘real’ keypad via the PCIR1 Interface Module. Simple. Easy. Done! Create sequences, edit, cut, paste, change code sequencing, insert new code functions and time delays, even tiering, all on the PC. DD4 includes punch through for codes like volume and mute that are used on all banks. Save the custom palettes for future use on other jobs, print a report showing the layout and store a copy on disk in the client’s file for future reference. Want to test the action of the button you just created? Want to know if the sequence works? With the simple click of a mouse, the virtual button will send out the codes you just programmed into the PCIR1 interface and out to the external component. Satisfied with the action of the button’s functions? Now place the symbols on top of the button. The symbol can either be text or an icon. Sit back and observe the placement of all these buttons and functions. Change locations or functions with the click of a mouse. Satisfied? Transfer this program to the real product. Done. Print a report showing the layout and all button functions for future reference to attach to a specific job project. FEATURES • Programs an entire array of products - SmartPad3, SmartPad LCD, WaterPad, URC-2P, MRC44, MRC88, 590-10, IRS232, IRS232A, RS232IR and the MAC1 • All of the latest upgrades for learning most IR codes currently in use. (Excludes high frequency carrier codes. Call Xantech regarding converters for these codes.) • Create virtual keypads and hand-held controllers on your PC monitor. Create single, dual or triple-gang keypads for the SmartPad3, or program all the functions you need for the URC-2P • Creating and editing codes are a snap with DD4. Create sequences, edit, change code sequencing, insert new code functions and time delays, even “push and hold” functions, all on the PC. Test the codes and then transfer this program to the actual product • Includes the PCIR ‘E’ version and DD4 software on CD-ROM • Requires Windows® 3.1, 95, 98, ME or 2000 • International versions available. Call for additional information. DD4 UPGRADE UPGRADES PREVIOUS VERSIONS TO DD4 • Includes DD4 CD-ROM, PCIR ‘E’ upgrade and a DD4 owner’s manual • PCIR requires an RA# for processing. Windows® is a registered trademark of Microsoft Corporation. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 11 CONTROLLERS DD4 DRAGON DROP-IR™ CONTROLLERS 12 590-10 PROGRAMMABLE CONTROLLER The 590-10 gives the custom installer the ability to use any push button or contact closure to initiate infrared commands. The 590-10 incorporates 16 isolated input circuits and a learning microprocessor. There are 16 pairs of screw terminals on its rear panel for use with up to 16 individual contact closures. FEATURES • Programmable with Dragon Drop-IR™ Programming Software • Multi-function sequencing for up to 40 commands per key, button, or contact closure of any type • Infrared output compatible with all Xantech brand IR control systems. Use 791-44 connecting blocks for emitter expansion • Memory: 8 Kbytes E2PROM • IR Carrier Frequency: 31.25 kHz to 71.50 kHz • Power Requirement: Xantech 782-00 Power Supply • Maximum Peak IR Signal Output Current: 100 milliamps • COM Port: RS232 Signal Compatible SPECIFICATIONS • Inputs: 16 Opto-Isolators connected via 16 screw terminal pairs, each in series with a 1,000-Ohm resistor • Input voltage range, 5 to 30 VDC • Drive current for each input is 11 millamperes at 12 volts DC • 12 VDC is available on the 12VDC “+” and “-” screw terminals for driving inputs through external switch closures • Banks: One with extensive macro (sequence) capacity • IR Out: Two screw terminals marked “O” (output) and “G” (ground). Same electrical characteristics as Xantech IR Receivers and Keypads • Power In: 12VDC, 300mA. 2.1mm coaxial power jack, center positive. Requires Model 786-00 Power Supply • Memory: 8 kilobyte non-volatile E2PROM • IR Carrier Frequency: 31.25kHz to 71.50kHz • Programming: Requires a PC running Dragon Drop-IR™ software (software included) • Dimensions/Weight: 8.5”W x 4.25”H x 2.875”D (216mm x 108mm x 73mm) / 1.8 lbs (0.8 kg) 598-00 KEYPAD FOR 590 • • • • • Eight-button keypad Fits in single-gang box Requires nine-conductor cable Includes legend cutout sheet Depth: 0.75” (19mm) 599-00 PULSED SWITCHING MODULE • The 599 is used in conjunction with the 590 Programmable Controller • Provides a momentary 12 volt DC pulse output when a steady 5 to 12 volt DC input is applied • By plugging a 781C power supply into a switched AC outlet on the back of an AM/FM receiver, a low voltage, switched DC signal is made available to the 590. This could be used to trigger a power-on command for a common source component, for instance • Power is supplied from the 590 • Dimensions: 4 1/4” x 1 7/8” x 1” (108mm x 48mm x 26mm) IN + IN 599-00 PULSED SWITCHING MODULE GND OFF ON GND +12V +12V ® SYLMAR, CA MADE IN U.S.A. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF The AV-61, in a “flat pack” design for incredible flexibility, is the perfect companion to the Xantech 795 and 796 Zone Controllers. It gives you the ability to split stereo audio and video signals six ways without any splitter loss. It also prevents audio distortion by buffering the sources from the loading effects of several AV receivers or preamps in a zoned system. FEATURES • Flat pack case allows easy space-saving positioning and mounting • Drives up to six audio/video components from a single A/V source • Low A/V distortion for crisp sound and picture SPECIFICATIONS - AUDIO • Gain: Unity • Input Overload: 3.0 V RMS • Input Impedance: > 20 k Ohms (ea. input) • Output Impedance: < 100 Ohms • THD: 0.06% at 1.0 V input level • Freq. Response: 10-45 kHz +/- 1 dB • Channel Separation: > 75 dB @ 1 kHz • IN-OUT Isolation: > 60 dB • OUT-OUT Isolation: > 60 dB • Signal to Noise: 100 dB (re 2V out) SPECIFICATIONS - VIDEO • Gain: Unity • Input Impedance: 75 Ohms • Output Impedance: < 3 Ohms • Video Insertion Loss: 50 Hz - 10 MHz < 1 dB • IN-OUT Isolation: 50 Hz-10 MHz > 25 dB • OUT-IN Isolation: 50 Hz-10 MHz > 55 dB • Return Loss: 50 Hz - 10 MHz > 20 dB GENERAL • A/V input/outputs: RCA-type phono jacks • Power Supply: 16V DC @ 300 mA (included) • Power jack: 2.1 mm coaxial type • Dimensions: 10” W x 2 3/4” D x 1 1/4” H (254mm x 70mm x 32mm) RP41AV REMOTE PREAMP The RP41AV is a fully functional infrared remote controlled audio/video preamp. Volume, Bass, Treble, Balance and Mute functions, plus A/V switching, provide all the functions needed for multi-room systems. It features a low noise, low distortion design with greatly increased headroom capability, for highest audio and video performance. The “flat pack” design addresses the need for reduced space requirements as multi-room, multi-zone systems grow in complexity. FEATURES • Four separate line level A/V inputs, simply labeled 1,2, 3, and 4, accessed in any order from the RC68+ Hand-held Remote/Programmer’s infrared commands • Separate Volume (Up/Down), Balance (Left/Right), Bass and Treble controls feature continuous adjustment in 2 dB steps, in either direction, all IR controlled • Balance, Bass and Treble controls have a Flat function (on the RC68+) for instant return to flat response from any previous setting • Separate Mute On and Mute Off functions are included so that you can give a positive command without knowing what the status is. This is very helpful in remote areas when all adjustments are made “blind” without any visual aids for status • IR control input port connects to the emitter output of Xantech devices, allowing remote control from keypads, IR receivers, connecting blocks, etc. • Tone controls allow Individual “EQ” of each room in multi-zone installations SPECIFICATIONS • Gain (@ max VC): Unity • Input Overload: 4.5 V RMS (@ max VC) • Input Impedance: > 40 k Ohms (ea. input) • Output Impedance: < 100 Ohms • Volume Attenuation: -80 dB • Signal to Noise: 100 dB (re 2V out), IEC ‘A’ weighted • THD: (VC -10 dB) 0.01% at 2.0 V input level • Channel Separation: > 75 dB @ 1 kHz • Freq. Response: 20Hz-20kHz ± 1 dB • Bass Range: ± 12 dB (in 2 dB steps) • • • • • Treble Range: ± 12 dB (in 2 dB steps) Video IN/OUT Impedance: 75 Ohms Video Insertion Loss: 50 Hz - 10 mHz < 1dB Video OUT/IN Isolation: 50 Hz - 10 mHz > 55 dB Power Requirements: 15 VAC @ 300 mA. Power supply included • Power and IR Inputs: four-terminal screw terminal plug-in connector • Requires RC68+ Programmer • Dimensions: 10” W x 3” D x 1 3/8” H (254mm x 77mm x 35mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 13 AMPLIFIERS AV61 A/V 6-WAY DISTRIBUTION AMPLIFIER IR RECEIVERS 14 480-00 DINKY LINK™ Miniature IR receiver that features surface mount technology. The 480 Dinky Link was originally developed in response to requests from many of our custom installers for a small, inconspicuous receiver. It was designed for placement in very tiny spaces. One example is between the grille and baffle board of an in-wall speaker. The high sensitivity of this receiver gives you the ability to place the 480 behind a grille and still receive the IR commands up to 20 feet away. If longer range is necessary, you must drill a 3/8-inch hole in the grille. FEATURES • Extremely small package, 7/16” x 5/16” x 2-1/8” (11mm x 8mm x 54mm) • Works in normal three-wire mode • Talkback red LED tests system for correct wiring as well as indicating infrared reception • Available in white or black • SUN480 Sunscreen filters available separately. Use these to help with sunlight and stray IR problems. 480B-00 - Standard version, with mini three-conductor 7 ft. ribbon cable and separate screw terminal block (supplied). 480W-00 - Same as the 480B-00 except with white case. 480B-30/RP - Quick connect version of the 480B-00. 7 foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an “IR RCVR” or “AUX” jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc. 480W-30 - Same as the 480B-30 except with white case. 480B-KIT - Consists of: one 480B-30 (black case with mini-plug), one 789-44 Connecting Block, one 781RG Power Supply and four 283M Emitters 480W-KIT - Consists of: one 480W-30 (white case with mini-plug), one 789-44 Connecting Block, one 781RG Power Supply and four 283M Emitters Except for the variations noted above, each unit in the 480 series has the same features and specifications. SPECIFICATIONS • Infrared modulation frequency bandwidth: 30 -100 kHz. • Nominal reception range: > 30 feet • Nominal reception angle: 55 degrees off axis • Cable requirements for long lengths: three-conductor/24 gauge up to 200’, 22 gauge up to 600’, 20 gauge up to 2000’ and 18 gauge up to 5000’ (unshielded OK) • Maximum cable length: One mile with 18 gauge • Maximum current output: 100 mA • Maximum number of directly driven IR emitters: Up to four connected in series. (Use Xantech Connecting Blocks for emitter expansion) • Power requirements: 12 volts DC @ 10 mA Requires 781RG Power Supply • Dimensions: 7/16” x 5/16” x 2-1/8” (11mm x 8mm x 54mm) 480-80 CFL FRIENDLY DINKY LINK™ This version of the 480 has been specifically designed to have great immunity to many sources of infrared interference and to have exceptional IR reception range. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL). In addition, the 480-80 will operate in direct sunlight! SPECIFICATIONS • IR input bandwidth: 30 - 60 kHz • Nominal reception range: > 70 feet • IR carrier output frequency: 38kHz 480-80B - CFL friendly version of the 480-00. Black case. 480-80W - Same as the 480-80B except with a white case. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF Another miniature IR receiver that features surface mount technology. The 490 has its electronics housed in a brass cylinder. The “business end” of the unit is a small round lens. This small receiver is designed to be placed in very tiny spaces. One example is a small corner of an equipment cabinet. A single, 1/2-inch hole will accommodate the 490. The high sensitivity of this receiver gives you the ability to place the 490 further away from the hand-held remote, increasing the placement options you have. FEATURES • Extremely small package, only 2” deep • Works in normal three-wire mode 490-00 • Talkback green LED tests system for correct wiring as well as indicating infrared reception • RF Grid included for EMI interference reduction • SUN490 Sunscreen filters available separately. Order these to help with sunlight and stray IR problems. They fit easily under the bezel The 490 is available in several versions as follows: 490-00 - Standard version, with mini three-conductor 7 ft. ribbon cable and separate screw terminal block (supplied). 490W-00 - Same as the 490-00 except with white bezel. 490DW-00 - J-box version of the 490W-00. Includes a white decorator style insert for single gang mounting. 490-30/RP - Quick connect version of the 490-00. 7 foot cable with 3.5mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an “IR RCVR” or “AUX” jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc. 490-KIT/RP - MICRO LINK™ KIT • Prepackaged kit includes: (1) 490-30 Micro Link Receiver (brass bezel) (1) CB60 Connecting Block (1) 781RG Power Supply (4) 283M Blink IR Mouse Emitters 490DW-00 490W-30 - Same as 490-30 except with white bezel. 490-90 - PLASMA-FRIENDLY MICRO LINK™ • Rejects interference from plasma displays, direct sunlight and fluorescent tube lights • 7 foot cable with 3.5mm stereo mini-plug • Range: 50 feet • Comes with CB12 Connecting Block and an RF grid for EMI reduction • Works in normal three-wire mode • Requires 781RG Power Supply • Patent pending 490-90 Except for the variations noted above, each unit in the 490 series has the same features and specifications. SPECIFICATIONS • Infrared modulation frequency bandwidth: 30 - 100 kHz • Nominal reception range: > 30 feet • Nominal reception angle: 55 degrees off axis • Cable requirements for long lengths: three-conductor/24 gauge up to 200’, 22 gauge up to 600’, 20 gauge up to 2000’ and 18 gauge up to 5000’ (unshielded OK) • Maximum cable length: One mile with 18 gauge • Maximum current output: 100 milliamps • Maximum directly driven IR emitters: Up to four connected in series (Use Xantech Connecting Blocks for emitter expansion) • Power requirements: 12 volts DC @ 10 mA • Requires 781RG Power Supply • Dimensions: 1/2” (13mm) diameter, 2” (51mm) deep 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 15 IR RECEIVERS 490-00 MICRO LINK™ IR RECEIVERS 16 780 SERIES J-BOX RECEIVERS These IR receivers, each with unique features, are designed to mount in single-gang electrical J-boxes. The mounting screws and red lens insert allow the installer to use decorator-style wall plates. COMMON FEATURES AND SPECIFICATIONS • Red talkback LED tests system for correct wiring as well as indicating infrared reception • Includes dark lens for decorator-style wall plate (Replacements available; order part #3016400) • Nominal reception angle: 45 degrees off axis • Cable requirements for long lengths: three-conductor/24 gauge wire up to 200’, 22 gauge up to 600’, 20 gauge up to 2000’ and 18 gauge up to 5000’ (unshielded OK) • Maximum cable length: One mile with 18 gauge • Maximum current output: 100 milliamps • Maximum number of directly driven IR emitters: Up to four connected in series (780-10 and 780-80 only). Use Xantech Connecting Blocks for emitter expansion • Power requirements: 12 volts DC @ 10 milliamps Requires 781RG Power Supply • Connections: four-screw terminal block on unit • Dimensions: 1-3/4” x 4” x 1” (45mm x 102mm x 26mm) 780-10 780-10/RP J-BOX IR RECEIVER The ubiquitous 780 has been the choice of custom installers for years. Use it for general applications at lowest cost. 780-90 PLASMA-FRIENDLY J-BOX IR RECEIVER • Rejects interference from plasma displays, direct sunlight and fluorescent tube lights • Mounts in standard J-box • Range: 50 feet • Has a talkback LED for system testing • Comes with lens for decorator-style wall plate • Works in normal three-wire mode • Requires 781RG Power Supply • Patent pending SPECIFICATIONS • Infrared modulation frequency bandwidth: 30 - 100 kHz • Nominal reception range: > 25 feet • Works in normal three-wire mode • SUN780 Sunscreen filters available separately. Order these to help with sunlight and stray IR problems 780-90 780-80 CFL FRIENDLY J-BOX IR RECEIVER This version of the 780 has been specifically designed to have great immunity to many sources of infrared interference. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL). In addition, the 780-80 will operate in direct sunlight! NOTE: 780-80 operates in three-wire mode only. SPECIFICATIONS • IR modulation frequency bandwidth: 30 - 60 kHz • Adjustable IR carrier freq: 32 to 56 kHz • Nominal reception range: > 70 feet • Includes system ON/OFF status LED (requires 12 VDC source @ 20 mA) 780-80 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF The 291 series are small, shelf-top IR receivers with a multitude of applications. Use them as an inexpensive method of repeating IR commands when wall-mounting an IR receiver is not practical. As with all Xantech IR receivers, the 291 can tie into multiroom IR extension systems. FEATURES AND SPECIFICATIONS COMMON TO ALL MODELS • Attractive case for shelf-top locations • Red talkback LED tests system for correct wiring as well as indicating infrared reception • Nominal reception angle: 45 degrees off axis • Attached 7’ cable and 3.5 mm stereo mini plug permits direct plug-in to Xantech Connecting Blocks that have an “IR RCVR” or “AUX” jack, such as the CB12, CB20, CB60, 789-44, 791-44, etc. • Cable requirements for long lengths: Three-conductor/24 gauge up to 200’, 22 gauge up to 600’, 20 gauge up to 2000’ and 18 gauge up to 5000’ (unshielded OK) • Maximum cable length: One mile with 18 gauge • Maximum current output: 100 milliamps • Maximum number of directly driven IR emitters: Up to four connected in series (use Xantech Connecting Blocks for emitter expansion) • Power: 12 volts DC @ 10 milliamps 781RG Power Supply required • Dimensions: 3 1/4” x 1” x 2” (83mm x 26mm x 51mm) 291-10/RP STANDARD VERSION • Use it for general applications. Includes a CB12 Connecting Block SPECIFICATIONS • IR modulation frequency bandwidth: 30 - 100 kHz • Nominal reception range: > 30 feet 291-KIT/RP HIDDEN LINK KIT • Prepackaged kit includes: (1) 291-10 Hidden Link (1) 789-44 Connecting Block (1) 781RG Power Supply (4) 283M Mouse Emitters 291-80 CFL FRIENDLY IR RECEIVER This version of the 291 has been specifically designed to have great immunity to many sources of infrared interference and to have exceptional IR reception range. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL). In addition, the 291-80 will operate in direct sunlight! SPECIFICATIONS • IR modulation frequency bandwidth: 30 - 60 kHz • Adjustable IR carrier frequency: 32 to 56 kHz (allows matching to actual component for optimum performance) • Nominal reception range: > 70 feet 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 17 IR RECEIVERS 291 SERIES HIDDEN LINK™ IR RECEIVERS The 170 started it all back in 1983. This version of the Xtra Link, Model 172, utilizes the 291-00 IR Receiver which has greatly improved range and interference rejection. The 291-00 receives the IR signals from a hand-held remote, converts them to DC control signals and passes them to the RF/IR Injector where they are mixed with the RF television signal. This combined signal is carried over a coaxial cable. At the other end of this coax the signals are separated at the RF/IR Coupler and the DC control signal is sent to an infrared emitter placed directly on the IR control window of the component you want to control. FEATURES • Attractive case for shelf top locations • Talkback red LED tests system for correct wiring as well as indicating infrared reception 291-00 IR Receiver Side View 291-00 IR Receiver Front View INJ94 Injector TV CPL94B Coupler SAT/VCR INPUT INJ94 INJECTOR IR RCVR REMOTE TV CPL94B COUPLER +12 V EMITTER EMITTER 781C-00 Power Supply 284M Dual Blink-IR Emitter There are several versions of the Model 172 available as follows, each utilizes coax connectors and power supplies appropriate for the applicable countries: Coax Jumper Cables 172-94 KIT 172-94/RP U.S.A. 172-94X/RP U.S.A. • 172-94X kits are used along with one standard 172-94 when installing Xtra Links in more than one room. This avoids duplication of couplers, emitters and coax jumper cables 291-00 IR Receiver Front View 172-77 CONTINENTAL EUROPE 781C-00 Power Supply INJ94 Injector 172-78 UNITED KINGDOM SPECIFICATIONS • IR modulation freq. bandwidth: 30 - 100 kHz • Nominal reception range: > 30 feet • Nominal reception angle: 45 degrees off axis • Maximum current output: 100 milliamps • Maximum number of directly driven IR emitters: Up to two single or two dual emitters using the CPL94B Coupler • The CPL77 Coupler contains a 5-900 MHz 2-way RF splitter • Cable requirement: RG-59/RG-6 coaxial • Maximum cable length: One mile with RG-6 • Power: 12 volts DC @ 10 milliamps. Power Supply Included • Dimensions of 291-00: 3-1/4” x 1” x 2” (83mm x 26mm x 51mm) 291-00 IR Receiver TV INPUT INJ94 INJECTOR IR RCVR +12 V Coax Jumper Cable 172-94X KIT 291-00 IR Receiver Front View 291-00 IR Receiver Side View IR RECEIVER +12 V EMITTER ANT INPUT INJ77 INJECTOR SIDE VIEW 781C-77 Power Supply LOCAL TV REMOTE TV CPL77 COUPLER SAT/VCR The complete 172 Xtra Link2 package includes the following: 1 - 291-00 Infrared Receiver 1 - Injector 1 - Coupler 1 - 284M Dual Blink IR Infrared emitter 1 - DC Power Supply 2 - Coax jumper cables with RF connectors (U.S.A. version only) TO TV IR RECEIVERS 18 172 XTRA LINK2™ SIDE VIEW 284M Dual Blink-IR Emitter 172-77 KIT - EUROPEAN VERSION 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF The 680-10 is an IR Remote Controlled AC Switcher with six AC outlet receptacles. It responds to RC68+ Programmer IR commands via its IR input port. Each outlet is switched ON or OFF by a high current electro-mechanical relay for higher reliability than solid state switching methods. FEATURES • The RC68+ provides separate codes for each outlet for each of the following modes: Toggle - The individual AC outlets are toggled ON when the corresponding IR code is sent and OFF when the same code is sent again Pair - Two IR codes are used to control one AC outlet. One code for ON, another for OFF Group - Two IR codes override all individual settings. All AC outlets turn ON with one code and OFF with the other. Note: Toggle or Pair operations for any of the individual outlets will still operate after Group ON is executed • Sequential ON commands for each outlet are possible when used in conjunction with learning devices, such as Xantech URC-1 remotes, SmartPads, or the 590 controllers • The 680-10 can be set to 55 different IR code groups. The code groups are identified by the numbers and letters that are on the face of each button on the RC68+ SPECIFICATIONS • Six AC outlets rated at 120 VAC, 5 Amps each • 15 Amps total current rating • Includes 15-Amp circuit breaker • 14-Gauge heavy duty three-conductor power cord 5-1/2 feet in length, with a grounded three-prong plug. • IR input jack (3.5mm mono mini jack) • Green LED indicator lights to confirm presence and acceptance of RC68+ IR commands • Requires RC68+ Hand Held Programmer • Dimensions: 15-1/2” W x 4-1/2” H x 2-3/8” D (394mm x 115mm x 61mm) • Weight: 4 lbs. 11 oz. (2.15kg.) AC1 CONTROLLED AC OUTLET The AC1 is a control voltage switched outlet. It can be used for AC power management with the control output of the ZPR6810 or any low voltage DC source (5-30VDC). FEATURES AND SPECIFICATIONS • Maximum switching current: 15A continuous @ 120V AC, 60Hz • DC input control jack: two-terminal Weco type • Control voltage range: 5-30VDC, 5mA @ 5V, 30 mA @ 30V • Dimensions: 4 1/4” L x 2 1/2” W x 2 5/8” H 108mm x 64mm x 67mm) AC2 CONTROLLED AC OUTLET The AC2 is an IR or voltage controlled switched AC outlet. It can be used for AC power management with the control output of the ZPR68-10 or any low voltage source (5-30VDC or AC). Can be controlled by a video signal. FEATURES AND SPECIFICATIONS • Maximum switching current: 15A continuous @ 120V AC, 60Hz • 0.5 - 60 second variable on/off delay (voltage input only) • AC or DC input control jack: two-terminal Weco type • Control out jack: Allows cascading for multiple delays • Control voltage range: AC or DC 5-30V, 5mA @ 5V, 30 mA @ 30V • Video Input: two RCA type jacks (loop-through) • Also controlled by video signal (NTSC) or Xantech RC68+ codes from a URC or SmartPad • Dimensions: 10 1/2” L x 3 1/4” W x 2 1/2” H (267mm x 83mm x 64mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 19 REMOTE CONTROL SWITCHERS 680-10 REMOTE AC SWITCHER REMOTE CONTROL SWITCHERS 20 RS41AV REMOTE AUDIO/VIDEO SWITCHER The RS41AV provides four audio/video input source selections, via IR remote control, greatly increasing the flexibility of your A/V receiver, TV monitor, etc. FEATURES • “Flat Pack” design for ease of placement and mounting • IR input with IR confirm LED for use with Xantech IR controlled systems • Requires RC68+ hand-held remote programmer for IR control codes • The RS41AV is adjustable to different IR control code groups using the RC68+, allowing individual control of multiple RS41AV’s in a system SPECIFICATIONS • Four video inputs, one video output • Four stereo audio inputs, one stereo audio output • Audio follows video switching • Audio insertion loss: 20 - 20 kHz <0.5 dB • THD: 0.04% at 1.0V input level • Video insertion loss: 50 - 10 MHz 0 dB • RCA-type phono jacks for all A/V inputs/outputs • Four-terminal plug-in for IR and power connections • 15 VAC 300 mA power supply included • Requires RC68+ Programmer • Dimensions: 10” x 3” x 1-3/8” (254mm x 77mm x 35mm) 686-10 REMOTE SPEAKER SWITCHER The 686-10 is a stand alone switcher. It allows the installer and user to turn six pairs of speakers ON and OFF by way of infrared commands. A particular room may be given the ability to turn only its own speakers on or off. Another room, such as the main control room, may be given control of the entire house in a “party mode”. SPECIFICATIONS • 200 watts per channel capacity • Switchable 4-ohm series resistor for amplifier protection • Isolated Left and Right Grounds. Allows use of bridging type power amplifiers • Four-terminal IR input for Xantech IR receivers, SmartPads and other devices • RC68+ codes permit Toggle, Pair and Group mode settings as well as different IR code groups for use of multiple 686-10’s in the same system • Universal mounting fits 19-inch racks or any 3-1/2 X 19 surface. Projects about 2-3/4 inches behind panel with cables connected • Requires RC68+ Programmer and 782-00 Power Supply • Dimensions: 19”W x 3 1/2” H x 2 1/4” D (483mm x 89mm x 58mm) CC62 REMOTE RELAY MODULE • • • • • Six double-pole double-throw relays, 5 amps, 30 VDC rated Two normally open and 2 normally closed contacts per relay Six six-terminal screw-type plug-in connectors - one for each of the relays Requires RC68+ Programmer and 782 Power Supply Dimensions: 19”W x 3 1/2” H x 2 1/4” D (483mm x 89mm x 58mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF • • • • • • • • • • Provides “dry contact” closures for a multitude of uses One double pole, double throw relay, 5 amp/30VDC rated Four contacts available: two normally open, two normally closed LED indicates contact status IR input terminals IR code select switch Requires RC68+ programmer IR codes for operation Also voltage switchable at CI terminal Requires 781RG power supply Dimensions: 5-1/4” x 2-3/8” x 1-7/8” (134mm x 61mm x 48mm) RGC11 REMOTE GAIN CONTROL MODULE • • • • • • • • • • • • • Remote controlled line level gain control Ramping volume and/or preset level adjustments Separate mute on and off Loop-through jacks for ‘daisy chaining’ multiple RGC11’s Selectable IR code groups Useful for controlling multiple power amplifiers from a single preamp Gain: Unity @ Max. V.C Freq. Response: 5 Hz to 70 kHz ± 3 dB THD: < 0.01% @ 2V out, IEC ‘A’ weighted S/N Ratio: > 96dB re 2V out Requires RC68+ Programmer IR codes for operation Includes AC power supply Dimensions: 5-7/8” x 2-3/4” x 1-5/8” (150mm x 70mm x 42mm) SR21 REMOTE A/B SPEAKER RELAY MODULE • • • • • • • • • • • Stand alone remote controlled A/B speaker switcher Connects one amplifier to an ‘A’ or ‘B’ speaker pair Connects one speaker pair to either an ‘A’ or ‘B’ amplifier 5 amp/30VDC current rated relay IR input terminals IR code select switch LED indicates A or B status Requires RC68+ Programmer IR codes for operation Voltage controlled at CI terminal Requires 781RG power supply Dimensions: 5 1/4” x 2 3/8” x 1 7/8” (133mm x 61mm x 48mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 21 REMOTE CONTROL SWITCHERS CC12 REMOTE RELAY MODULE REMOTE CONTROL SWITCHERS 22 RT16-10 AND RT8 ADDRESSABLE IR ROUTERS The RT16-10 Router is a one-in/sixteen-out switcher which directs an infrared control signal to any one, multiples or all 16 output ports. The RT8 is similar except it is a one-in/eight-out switcher. Now you can control large groups of TV monitors (or any other A/V product) from control locations using Xantech IR Receivers or SmartPads. Up to 16 devices may be addressed with one RT16-10. In addition, the “I” and “G” output ports can drive LED indicators placed at each controlled device location so that you can see which devices are being addressed at any given time. An ID CODE SWITCH, along with the appropriate RC68+ commands, permits specific routing modes as follows: • Single Routing - Allows any individually selected port to be driven with an IR RT16-10 control signal separate from the others • Multiple Routing (RT16-10) - IR control signals can be routed to any desired combination of ports (1 through 16) for simultaneous operation. This is useful if you wish to address smaller groups of units for special purposes The chosen IR routes remain on, allowing you to control just the selected devices, until the Group Off command from the RC68+ is sent. You may make up sequences (macros) in a learning device (such as the Xantech SmartPads) for each routing combination you desire for rapid access to the controlled groups • Group On (RT16-10 and RT8) - In this mode all routes are chosen simultaneously with the Group On command. This is useful if you wish to quickly address all IR outputs at the same time • Group Off (RT16-10 and RT8) - Turns the IR signal off at all IR outputs regardless of the routing mode chosen RT8 SPECIFICATIONS • The RT16-10 and RT8 respond to Xantech RC68+ Hand Held Programmer codes • CODE GROUP NUMBERS - The RT16-10 and RT8 are capable of being set to 55 different code groups. The code groups are identified by the numbers and letters that are on the face of each button on the RC68+ • A four-terminal plug-in connector, “IR RCVR INPUT”, permits connection of all Xantech IR Receivers, Keypads, Controllers, etc • A green LED adjacent to the “IR RCVR INPUT” serves as an input signal Test-IR • 16 IR “O” and “G” emitter outputs and 16 “I” and “G” indicator outputs are located on 16 four-terminal plug-in connectors (eight on the RT8). • The “I” and “G” indicator outputs are current limited to 25 mA, allowing the direct connection of an LED without the need for a current limiting resistor • The DATA IN and DATA OUT modular jack ports allow future cascading of RT16-10’s. • Power Requirements: 12V DC @ 1 Amp • RT8 requires a 786-00 power supply • RT16-10 requires a 782-00 power supply • Requires RC68+ Programmer • Universal mounting fits 19” racks - RT16-10 only • Dimensions: RT16-10 - 19” W x 3 1/2” H x 1 1/4” D (483mm x 89 x 32mm) RT8 - 9 7/8” W x 2 7/8” H x 1 3/8” D (251mm x 73mm x 35mm) • Weight: RT16-10 - 1 lb. 3 oz. (.46kg.) RT8 - 12 oz. (.3kg.) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF Improved version of our original IRS232 Module provides IR control of advanced components such as projectors and lighting systems that would normally be controlled via RS232 with exotic controllers or automated systems. FEATURES • Selectable baud rate, data bits, stop bits and parity • Can output HEX as well as ASCII codes • Requires Dragon Drop-IR™ for programming • Converts Xantech RC68+ IR codes to ASCII or HEX commands • Requires 781RG power supply and RC68+ Programmer • Dimensions/Weight: 4.25” W x 1.175” D x 3.25” H (107mm x 30mm x 82mm) / 0.5 lbs (0.2 kg) IRS232 IR to RS232 Module. • Same as the IRS232A but without selectable baud rate, data bits, stop bits, and parity • Does not allow for the output of HEX codes in addition to ASCII. RS232IR RS232 TO IR MODULE RS232IR Module allows exotic control systems such as lighting systems and automation systems to send user-programmable IR commands when triggered by pre-defined Xantech ASCII commands. FEATURES • Requires Dragon Drop-IR™ for programming • Converts Xantech ASCII commands to IR codes • Requires 781RG power supply • Dimensions/Weight: 7.25” W x 1.625” D x 4.25” H (183mm x 41mm x 107mm) / 1.4 lbs (0.6 kg) MAC1 MINI-MACRONIZER™ MAC1 has the ability to send IR codes sequences or macros when triggered by a single RC68+ command. FEATURES • Requires Dragon Drop-IR™ for programming • Eliminates the problem of partial sequence execution from movement of hand-held controllers • Cuts down network traffic • Requires 781RG power supply • Dimensions/Weight: 7.25” W x 1.625” D x 4.25” H (183mm x 41mm x 107mm) / 1.4 lbs (0.6 kg) IR-DC4 IR TO ARRAKIS RS232 INTERFACE • Converts Xantech RC68+ IR codes to ASCII commands to control the Arrakis DC4 Hard Disk Audio Jukebox • Requires 781RG power supply, Xantech IR Receiver and RC68+ IR-X10 LIGHTING MODULE • • • • • • • Converts RC68+ IR codes to X-10 commands Requires Dragon Drop-IR™software for programming 64 presets per module Four scenes per module Adjusts temperature - preset or variable Dimensions: 4.25” W x 1.25” D x 2” H (108mm x 32mm x 51mm) Requires 781RG power supply 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 23 MODULES AND CONNECTING BLOCKS IRS232A IR TO RS232 MODULE MODULES AND CONNECTING BLOCKS 24 CB12 ONE ZONE CONNECTING BLOCK • Connects one emitter port and power supply to Xantech IR Receivers that use a stereo mini plug • Also includes a three-terminal block for wired connection of Xantech IR Receivers and Smart Pads • 3.5 mm stereo mini jack for quick-connect IR receivers • 3.5 mm mono mini jack for one single or one dual emitter • 2.1 mm coaxial power jack • Uses either the 781RG or 782-00 power supply • Dimensions: 2 1/8” x 1 1/4” x 3/4” (54mm x 32mm x 19mm) CB18 “THE STRIP-IR” PARALLEL CONNECTING BLOCK Now you can easily connect all those home run wires from multiple IR receivers to the input terminals of a connecting block, or from Match Maker room volume controls to the output terminals of a main amplifier. FEATURES • High current design (12 Amps peak) allows amplifiers rated as high as 500 watts to be used with the CB18 • One-in eight-out or eight-in one-out capability • Nine four-terminal plug-in connectors on 4-conductor bus • Screw terminals handle wire sizes from 24 to 12 gauge • Dimensions: 11 1/4” x 1 1/4” x 1 1/4” (286mm x 32mm x 32mm) CB20 ONE ZONE CONNECTING BLOCK • Connects two emitter ports and power supply to Xantech IR Receivers that use a stereo mini plug • 3.5 mm stereo mini jack for quick-connect IR receivers • Two 3.5 mm mono mini jacks with 470-Ohm resistors drive two single or two dual emitters • 2.1 mm coaxial power jack • Uses either the 781RG or 782-00 power supply • Dimensions: 2 1/8” x 1 1/4” x 3/4” (54mm x 32mm x 19mm) CB60 ONE ZONE CONNECTING BLOCK • Connects six emitter ports and power supply to all Xantech IR Receivers that use a stereo mini plug • 3.5 mm stereo mini jack for quick-connect IR Receivers • 3.5 mm mono mini emitter ports drive six single or six dual emitters in parallel • Contains a series 100-Ohm resistor per emitter port • Uses either the 781RG or 782-00 power supply • Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm) CBCSM1 CSM1 CURRENT SENSOR CONNECTING BLOCK • Allows the CSM1 Current Sensor to be used as a general purpose current sensor (independent of the MRC44 or MRC88) • Requires CSM1 Current Sensor and 781RG Power Supply CSM1 CURRENT SENSING MODULE • Senses the power state of a component by detecting the difference in current drawn by the component when it is either on or off • Used with the CBCSM1 for stand-alone applications • Also available in 230 VAC / 50 Hz 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF • • • • Connects four emitter ports and power supply to all Xantech infrared receivers and keypads Four parallel emitter ports with 470 Ohm resistors drive four single or four dual emitters Quick-connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED’s • 2.1 mm coaxial power jack • Uses either the 781RG or 782-00 power supply • Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm) 789-44PS/RP • Same specifications as the 789-44 except a 781RG power supply is included. 789-44D ONE ZONE IN-WALL DECORATOR CONNECTING BLOCK • • • • • • • • Similar to the standard 789-44 but used in a single gang J-box configuration Can be used at either end of an infrared buss system Four parallel emitter ports on external connecting plate Quick connect stereo mini jack on external connecting plate for Xantech IR receivers that are equipped with the stereo mini plug 2.1mm coaxial power jack on external connecting plate Four-terminal plug in connector on the back of the plate for Power and IR Signal Available in white and ivory Dimensions: 2 15/16” W x 1 3/4” D x 13/16” H (75mm x 45mm x 21mm) 790-00 MULTIPLE EMITTER CONNECTING BLOCK • • • • • • Emitter expansion block for the 791-44 or 792-10 Parallel emitter ports drive 10 single or 10 dual emitters Contains a series 100-ohm resistor per emitter port Emitter and IN/OUT ports are 3.5 mm mono mini-jacks Screw terminals provide for wired input connections Requires the 792-10 Power Module or the 791-44 Amplified Connecting Block to drive the 790 block • Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm) 791-44 ONE ZONE AMPLIFIED CONNECTING BLOCK • • • • • • • • • • Amplified version of the 790-00 Emitter ports with jumpers permit high or low power High-speed opto-isolator for improved operation Quick connect stereo mini jack for Xantech IR Receivers that use a stereo mini plug Parallel emitter ports drive 10 single or 10 dual emitters Up to nine 790-00’s can be connected to the 791-44 if more than 10 emitter ports are needed STATUS terminal for connection of Xantech IR Receivers and Keypads that have status indicator LED’s Contains red LED input signal Test-IR Uses either the 781RG or 782-00 power supply Dimensions: 6” x 2 1/4” x 15/16” (153mm x 58mm x 24mm) 792-10 POWER MODULE • • • • • • Input impedance selectable between high and low Provides phantom power for standard Xantech IR receivers. High current mode drives 790 connecting block 3.5 mm mono mini jack emitter port. Uses the 781RG power supply Dimensions: 4 1/4” x 1 5/8” x 1” (108mm x 42mm x 26mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 25 MODULES AND CONNECTING BLOCKS 789-44 ONE ZONE CONNECTING BLOCK MODULES AND CONNECTING BLOCKS 26 793-10 SERIAL CONTROL COMBINER • Combines IR serial data from up to five A/V receivers to common source equipment • Isolating diode system prevents serial control interference between receivers • DIP switch sets polarity for either positive or negative serial logic systems • Can be “daisy chained” to accommodate any number of A/V receivers in multizone systems • Requires same brand components • Used in multi-zone systems • Dimensions: 6” x 2 1/4” x 1” (153mm x 58mm x 26mm) 794 AND 797 UNIVERSAL INTERFACE MODULES There is a trend in the industry for manufacturers of A/V equipment to have a “remote” input jack on the back of their equipment. While there are no standards for the type of signal or input jack on these units, we have created a series of interface modules to allow any of our IR receivers to interface with these various jacks. The brands and model numbers are being constantly updated. Call for current information. 794-10 3.5mm stereo mini plug interface cable 794-30 Five-pin DIN plug interface cable (Adcom) 794-50 RCA-type phone plug interface cable (“RC5” components) 794-60 RJ-9 type interface cable for Makita 794-80 Sony non-DST with four-pin “SIRCS” cable 797-21 797-22 797-40 797-50 RCA-type phone plug interface cable (Marantz and Carver “Multi” jack) F-type interface cable (McIntosh, newer models) RJ-23 interface cable (ADS) 3.5mm mini stereo plug interface cable for Sony DRLC “RMR” jack SPECIFICATIONS • Power requirements: 12 volts DC @ 15 milliamps. Requires 781RG Power Supply • Connections: 4-screw terminal connector for interface with Xantech IR Receivers and other devices • 3.5 mm mono mini jack for IR emitter, 3.5 mm stereo mini jack for interface cable, 2.1 mm coaxial power jack • Dimensions: 4 1/4” x 1 5/8” x 1” (108mm x 42mm x 26mm) 795-20 FOUR ZONE AMPLIFIED CONNECTING BLOCK Create an elaborate multiple zone system at a reasonable cost. The 795 can control four individual AM/FM receivers (for example) for four zones with individual control of basic functions such as source select, volume, tone, station select, etc. in each zone. And, at the same time, the 795-20 can control common devices such as a CD changer, VCR, Tape deck, etc. The 795 supplies four individual zone sections with two emitter ports per zone. It also supplies an amplified emitter section with 10 common emitter ports. FEATURES • Controls four individual zone’s equipment • Can control two pieces of equipment per zone • Controls 10 pieces of equipment used for common sources • Expandable to nine zones with the model 796-20 Zone Expander • 14 test LED’s indicate proper operation and hook-up • Uses 282/283/286 Series or 284M emitters • The 795-20 and 796-20 are upgraded from previous versions. They incorporate isolation devices for improved operation SPECIFICATIONS • Maximum current output: 100 mA. • Power requirements: 12 volts DC @ 100 mA. • Requires 782-00 Power Supply • Inputs: Four three-screw terminal connectors to interface with all Xantech IR receivers and SmartPads • Outputs: Eight zone emitter ports and 10 common emitter ports (3.5 mm mono mini jacks) • Dimensions: 1” x 13 3/8” x 1 7/8” (26mm x 340mm x 48mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF • • • • Expands the 795 Zone Controller to a total of nine zones Connects directly to the 795 and is powered via the 795 Can be used in conjunction with a 791-44 (without a 795) for a 6 zone system Multiple 796’s may be used with a 791-44 for even more zones (limited only by IR noise considerations) • Dimensions: 1” x 13 3/8” x 1 7/8” (26mm x 340mm x 48mm) ZC21 TWO ZONE CONNECTING BLOCK • • • • • • • Simplified version of the 795 controller when only two zones are required One plug-in screw connector for each zone’s IR receiver and/or keypads 3.5mm mono mini jack for zone and common IR emitters Can be used with a 791-44 amplified connecting block for common emitter expansion 2.1mm coaxial power jack for connection of 781RG or 782-00 Power Supplies Only to be used with single or dual emitters on the zone outputs Dimensions: 3” x 1 3/4” x 13/16” (77mm x 45mm x 21mm) 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 27 MODULES AND CONNECTING BLOCKS 796-20 SIX ZONE CONNECTING BLOCK/EXPANDER EMITTERS 28 MINI EMITTERS This series of mini emitters contain a tiny infrared light emitting diode housed in a miniature, almost black, injection molded plastic shell. These versatile units can be used in a number of innovative ways. They are designed to be installed directly on the IR control window of the controlled equipment. The almost black shell passes infrared (IR) leaving access to the original remote controller while at the same time making the most unobtrusive installation possible. The new mouse emitters are made of a deep purple Lexan® for improved infrared pass-through, allowing a greater range of direct control of components from hand-held controllers. The “M” series emitters also now use a new and improved adhesive that keeps emitters attached to components in even the most harsh conditions. 282M/RP MOUSE EMITTER • Non-visible, high-output version • New deep purple Lexan® shell • New and improved clear adhesive film included on emitter housing for attachment to IR window of controlled component • Two 1/2” pieces of double-sided clear adhesive tape included for replacement purposes. • Lead is terminated with a 3.5mm mono mini plug • Length of wire: 10 feet 282M / 283M 283M BLINK-IR MOUSE EMITTER • Visible, low-output version of the 282M • New deep purple Lexan® shell • New and improved clear adhesive film included on emitter housing for attachment to IR window of controlled component • Two 1/2” pieces of double-sided clear adhesive tape included for replacement purposes • Lead is terminated with a 3.5mm mono mini plug • Length of wire: 10 feet 283MW BLINK IR EMITTER • Mini-emitter with mini-wire • Same features as the 283M except that the wire length is 6 ft. long with 28 gauge wire 284M DUAL EMITTER • Two emitters in series with each other and terminated in a single 3.5mm mono mini plug • Length of wire: 7 feet to junction, 3 feet to each emitter 286M DUAL BLINK-IR MOUSE EMITTER • Dual version of the 283M • The emitters are in series with each other and terminated in a single 3.5mm mono mini plug • Length of wire: 7 feet to junction, 3 feet to each emitter 284M / 286M MS1 EMITTER SHIELD COVER • Shield cover for all ‘mouse’ emitters Lexan® is a registered trademark of General Electric Company. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF The 760-00 is an in-wall mountable stereo speaker volume control with impedance matching capability. From one to 16 pairs of stereo speakers may be driven from one stereo power amplifier, using an equal number of 760’s. It maintains correct impedance matching between the amplifier and the speakers by the use of instant setting S1, S4 and S8 jumpers on the control itself. This eliminates the need for separate impedance matching components in multi-room installations. The S1, S4 and S8 impedance matching jumpers are located on the printed circuit board near the transformers, readily accessible for instant setting during installation. FEATURES • Includes eight, plug-in type screw terminals • Tri-Fi™ winding system for highest quality audio performance • 11-position stepped autotransformer design • Uses any decorator style wall cover plate • Knob and decorator style insert plate pre-finished in either white or ivory • Insert plate easily removes for custom painting SPECIFICATIONS • 150 Watts per channel peak power, 25 Watts per channel continuous • Frequency response: 20 Hz-20,000 Hz ± 1 dB @ 1W • Attenuation of steps: 3 to 6 dB per step, 35 dB max. (Max. CCW position is OFF) • Attenuation of S settings with VC at max. CW position: S1=0 dB (pass thru); S4=9 dB; S8=13 dB • Independent grounds between channels • Dimensions: 1 5/8” W x 2 7/8” H x 2 5/16” D (42mm x 73mm x 75mm) VCIR/RP MATCH MAKER™ SPEAKER VOLUME CONTROL WITH IR RECEIVER The VCIR combines all of the impedance matching capabilities of the 760 Match Maker volume control and the high sensitivity of the 480 Dinky Link IR receiver into one single-gang device. The VCIR is cosmetically appealing, in that it only takes up half the space previously required for a volume control and an IR receiver. Available in white and ivory. FEATURES • Combines in-wall volume control and IR receiver into single-gang device • Has all features of the 760-00 • Talkback LED tests system wiring and indicates IR reception • Includes system ON/OFF status LED SPECIFICATIONS • 150 Watts per channel peak power, 25 Watts per channel, continuous • Frequency response: 20Hz-20,000Hz ± 1dB @ 1W • Attenuation of steps: 3 to 6 dB per step, 35 dB max. (Max CCW position is OFF) • Infrared modulation frequency bandwidth: 30-100kHz • Nominal reception range: >30 feet • Dimensions: 1 5/8” W x 2 7/8” H x 2 5/16” D (42mm x 73mm x 59) VCIR-CFL CFL FRIENDLY VERSION OF THE VCIR This version of the VCIR has been designed to have great immunity to sources of infrared interference and has exceptional IR reception range. In particular, it has high rejection of IR interference generated by compact fluorescent lights (CFL). In addition, the VCIR will operate in direct sunlight! Available in white and ivory. SPECIFICATIONS • IR output frequency: 38 kHz • Nominal reception range: >70 feet 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 29 VOLUME CONTROLS 760-00/RP MATCH MAKER™ SPEAKER VOLUME CONTROL VOLUME CONTROLS 30 RAT1 REMOTE AUTOTRANSFORMER The RAT1 is an infrared remote controlled stereo speaker volume control with impedance matching capability. Now you can control from one to 16 pairs of stereo speakers from one stereo power amplifier, using an equal number of RAT1’s. Control them with any Xantech IR receiver or keypad or with MIRV1 motorized volume controls. The RAT1 maintains correct impedance matching between the amplifier and the speakers with the use of instant setting 1X, 2X, 4X and 8X jumpers, located on the unit. This eliminates the need for separate impedance matching devices in multi-room installations. FEATURES • 10-position, relay driven, stepped auto transformer design • Tri-Fi™ winding system for highest quality audio performance • Includes plug-in type screw terminals • Independent grounds between channels • Easily mounted “flat pack” design • Requires RC68+ IR commands or MIRV1 for operation SPECIFICATIONS • 75 watts per channel music power, 25 watts per channel continuous • Frequency response: 20 Hz - 20,000 Hz ± 1 dB at rated power input • Attenuation: 10 steps at 3 to 6 dB per step, 33 dB maximum • Power: 300mA @ 12 VDC. Requires 782 power supply • Dimensions: 8” x 4 1/8” x 2 5/8” (204mm x 105mm x 67mm) MIRV1 IR/MOTORIZED INFRARED VOLUME CONTROLLER This award winning model, the MIRV1, in conjunction with a RAT1, allows you to control speaker volume from any room, using the standard three-conductor Xantech IR bus system. You can even use two or more MIRV1’s in the same room or listening area, for convenient operation, or in conjunction with a Xantech IR receiver for both remote and manual volume control. FEATURES • Includes plug-in type screw terminals for IR bus connections • Servo action causes multiple MIRV1’s to automatically track each other’s position • LED in knob blinks with knob rotation and also serves as a system ON/OFF status indicator • One nut disassembly for custom painting • Knob and plate pre-finished in either white (MIRV1-W) or ivory (MIRV1-I) • Fits standard single-gang J-box • Depth behind plate: 2-1/8 inches (54mm) • Power: Receives 12V power from RAT1. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF • • • • • • An expanded version of the RC68 programmer with over 14,000 IR codes It contains all the IR codes necessary to operate all the Xantech IR controlled components Use to program universal learning devices, such as Xantech remotes and keypads IR control code groups are adjustable within many Xantech components Requires two AA batteries (not included) Dimensions: 7 1/8” H x 2 5/8” w x 7/8”D (181mm x 67mm x 23mm) 781RG POWER SUPPLY • Regulated 12V DC for most Xantech remote control devices (marked rating is 12 Volts, 200 mA) • Powers basic Xantech IR systems • Uses 2.1mm coaxial plug 782-00 HIGH CURRENT POWER SUPPLY • Steady, regulated, 12V DC, 1 Amp power supply • High current supply designed to power a large number of Xantech devices from a single power supply • Uses 2.1mm coaxial plug 786-00 MEDIUM CURRENT POWER SUPPLY • Supplies 12V DC, 300 mA for certain Xantech devices, such as a 590. Do not use with Xantech IR Receivers! • Uses coaxial 2.1mm plug 634-00 GROUND BREAKER • Eliminates hum bars or audible hum generated when A/V components are connected directly to a cable TV or Satellite system • Isolates ground potential differences within an audio/video system without affecting the RF signal INJ94 RF/IR INJECTOR • • • • Used to inject the infrared control signals when used in conjunction with a TV coaxial RF cable. Has two “F” type coaxial jacks, one IR receiver 3.5mm mini stereo jack and one 2.1mm power jack IR RCVR jack works with any Xantech IR Receiver having a 3.5mm stereo mini plug Requires 781RG Power Supply CPL94B RF/IR COUPLER • Used to extract the IR control signals when used in conjunction with a TV coaxial RF cable • Has two “F” type coaxial jacks for RF connections. • Two 3.5mm mono mini emitter jacks with 470-Ohm resistors drive two single or two dual emitters CPL10 RF/IR COUPLER • Used to extract or inject IR control signals when used in conjunction with a TV coaxial RF cable • Has two “F” type coaxial jacks and one IR out (or in) 3.5mm mono mini jack BYPASS94 KIT • Routes the IR control signals around RF amplifiers and non-DC-pass RF splitters. • Kit contains two CPL10’s, one jumper cable with a 3.5mm mini mono plug on each end and two short RG-59 cables with “F” connectors on each end BYPASS77 KIT • Same as Bypass94, except the couplers and the short cables use European-style RF connectors 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 31 ACCESSORIES RC68+ PROGRAMMER ACCESSORIES 32 TEST-IR™ • • • • Red LED in a clear mouse shell case Tests for the presence of infrared signals A “must have” for every serious installer! Not to be used as an emitter. 799-00 HELP-IR™ • Emits continuous IR for trouble shooting IR systems • Includes 781 power supply and Test IR • Small, self contained case: 1” x 1” x 5” (26mm x 26mm x 127mm) 200-00 2-WAY RF SPLITTER • DC pass design allows IR control signal to pass through freely without the need of a ByPass Kit. 202-00 4-WAY RF SPLITTER • Four-way version of 200-00. 203-00 DC BLOCKER • Used on RF splitter outputs connected to rooms without Xtra Links • Prevents a connected TV, VCR, etc. from shorting IR control signals on a coax system using Xtra Link 172’s, etc. 784-00 EMITTER EXTENSION CABLE • 50-foot, 24-gauge, 2-conductor cable. Use for long emitter runs • 3.5 mm mini mono plug on one end and female mini mono jack on the other. ODC2 OUTDOOR DEVICE COVER • 2-Gang weather resistant front cover protects the 730 and other Decora® styled devices • Hinged self-latching cover and front plate have neoprene gaskets to seal out moisture. • Stainless steel mounting screws included. SUN480 SUNSCREEN FILTER • Filter kit for reducing IR interference for 480 Dinky Link Receiver SUN490 SUNSCREEN FILTER • Filter kit for reducing IR interference for 490 Micro Link Receiver SUN780 SUNSCREEN FILTER • Filter kit for reducing IR interference for 780 J-Box Receiver and VCIR TUBE490 LIGHT ISOLATION EXTENSION TUBE • Recesses a 490 receiver to isolate it from harsh light for 490 Micro Link Receiver 3016400 DARK PURPLE 780 LENS • Replacement lens for model 780 3022000 DECORA® STYLE INSERT • Unpainted, unpunched, plated steel bracket for custom applications • Minimum order quantity of 25 pieces 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF • White painted bracket, hole punched for use with 490 • Minimum order quantity of 25 pieces 6015900 5-FOOT MINI PLUG CABLE • 5 foot cable with a standard 3.5mm mini plug and stripped/tinned leads • Minimum order quantity of 10 pieces 6017400 1-FOOT MONO CABLE • 1 foot cable with 3.5mm/3.5mm plug 6017440 ADAPTER JACK • Dual in-line 3.5mm mini jack, Female to Female 6017450 10-FOOT MONO CABLE • 10 foot cable with 3.5mm/3.5mm plug SLB2 DUAL GANG PLASTIC BOX • Retrofit Box LV1 SINGLE-GANG PLASTIC RETRO RING LV2 DOUBLE-GANG PLASTIC RETRO RING DECORA® is a registered trademark of Leviton. 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 33 ACCESSORIES 3022490 DECORA® STYLE INSERT INDEX BY MODEL NUMBER 34 INDEX BY MODEL NUMBER 172-77 172-78 172-94/RP 172-94X/RP 200-00 202-00 203-00 282M/RP 283M 283MW 284M 286M 291-10/RP 291-80 291-KIT/RP 3016400 3022000 3022490 480-80B 480-80W 480B-00 480B-30/RP 480B-KIT 480W-00 480W-30 480W-KIT 490-00 490-30/RP 490-90 490DW-00 490-KIT/RP 490W-00 490W-30 590-10 598-00 599-00 6015900 6017400 6017440 6017450 634-00 680-10 686-10 760-00/RP 780-10/RP 780-80 781RG 782-00 784-00 786-00 789-44 789-44D 789-44PS/RP 790-00 791-44 Xtra Link2™ European . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Xtra Link2™ United Kingdom . . . . . . . . . . . . . . . . . . . . . . . .18 Xtra Link2™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Xtra Link2™ Xpansion Kit . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Two-Way RF Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Four-Way RF Splitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 DC Blocker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Blink-IR™ Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Blink-IR™ Emitter Mini-Wire . . . . . . . . . . . . . . . . . . . . . . . .28 Dual Mini Emitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Dual Blink-IR™ Mouse Emitter . . . . . . . . . . . . . . . . . . . . . . .28 Hidden Link™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Hidden Link™ CFL Friendly . . . . . . . . . . . . . . . . . . . . . . . . .17 Hidden Link™ Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Dark Purple 780 Lens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Decora™ Style Insert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Decora™ Style Insert for 490 . . . . . . . . . . . . . . . . . . . . . . . .33 Dinky Link™ CFL Friendly - Black . . . . . . . . . . . . . . . . . . . . .14 Dinky Link™ CFL Friendly - White . . . . . . . . . . . . . . . . . . . .14 Dinky Link™ - Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Dinky Link™ Quick Connect - Black . . . . . . . . . . . . . . . . . . .14 Dinky Link™ Quick Connect Kit - Black . . . . . . . . . . . . . . . .14 Dinky Link™ - White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Dinky Link™ Quick Connect - White . . . . . . . . . . . . . . . . . .14 Dinky Link™ Quick Connect Kit - White . . . . . . . . . . . . . . . .14 Micro Link™ - Brass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Micro Link™ Quick Connect - Brass . . . . . . . . . . . . . . . . . .15 Plasma-Friendly Micro Link™ . . . . . . . . . . . . . . . . . . . . . . . .15 J-Box Micro Link™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Micro Link™ Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Micro Link™ - White . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 Micro Link™ Quick Connect - White . . . . . . . . . . . . . . . . . .15 Programmable Controller . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Keypad for 590 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Pulsed Switching Module . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Five-Foot Mini Plug Cable . . . . . . . . . . . . . . . . . . . . . . . . . .33 One-Foot Mono Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Adapter Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 10-Foot Mono Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Ground Breaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Remote AC Switcher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Remote Speaker Switcher . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Match Maker™ Speaker Volume Controller - White . . . . . .29 J-Box Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 J-Box Receiver CFL Friendly . . . . . . . . . . . . . . . . . . . . . . . .16 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 High Current Power Supply . . . . . . . . . . . . . . . . . . . . . . . . .31 Emitter Extension Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 One Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .25 One-Zone In-Wall Connecting Block . . . . . . . . . . . . . . . . . . .25 Connecting Block and Power Supply . . . . . . . . . . . . . . . . . .25 Multiple Emitter Connecting Block . . . . . . . . . . . . . . . . . . . .25 One-Zone Amplified Connecting Block . . . . . . . . . . . . . . . . .25 792-10 793-10 794 / 797 795-20 796-20 799-00 AC1 AC2 AV61 BYPASS77 BYPASS94 CB12 CB18 CB20 CB60 CBCSM1 CC12 CC62 CPL10 CPL94B CSM1 DD4 UPGRD DD4 INJ94 IR-DC4 IRS232 IRS232A IR-X10 LV1 LV2 MAC1 MIRV1 MS1 ODC2 RAT1 RC68+ RGC11 RP41AV RS232IR RS41AV RT16-10 RT8 SLB2 SR21 SUN480 SUN490 SUN780 TEST-IR TUBE490 URC2B URC2P URC2P/RP VCIR/RP VCIR-CFL ZC21 Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Serial Control Combiner . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Universal Interface Modules . . . . . . . . . . . . . . . . . . . . . . . . .26 Four-Zone Amplified Connecting Block . . . . . . . . . . . . . . . .26 Six-Zone Connecting Block / Expander . . . . . . . . . . . . . . . . .27 Help-IR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Controlled AC Outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Audio/Video Six-Way Distribution Amplifier . . . . . . . . . . . . .13 Bypass Kit (European) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Bypass Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 Strip-IR™ Parallel Connecting Block . . . . . . . . . . . . . . . . . . .24 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 One-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .24 CSM1 Current Sensor Connecting Block . . . . . . . . . . . . . . .24 Remote Relay Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Remote Relay Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 RF/IR Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 RF/IR Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Current Sensing Module . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Upgrades previous Dragon Drop-IR™ versions . . . . . . . . . .11 Dragon Drop-IR™ Programming Software . . . . . . . . . . . . . .11 RF/IR Injector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 IR to RS232 Interface for Arrakis DC-4 . . . . . . . . . . . . . . . .23 IR to RS232 Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 IR to RS232 Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Lighting Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Single-Gang Plastic Retro Ring . . . . . . . . . . . . . . . . . . . . . .33 Double-Gang Plastic Retro Ring . . . . . . . . . . . . . . . . . . . . . .33 Mini-Macronizer™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Motorized IR Volume Controller - White . . . . . . . . . . . . . . . .30 Mouse Emitter Shield Cover . . . . . . . . . . . . . . . . . . . . . . . . .28 Outdoor Device Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 IR Controller Remote Auto Transformer . . . . . . . . . . . . . . . .30 IR Remote Programmer . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Remote Gain Control Module . . . . . . . . . . . . . . . . . . . . . . . .21 IR Remote Control Audio/Video Preamp . . . . . . . . . . . . . . . .13 RS232 to IR Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 IR Remote Control Audio/Video Switcher . . . . . . . . . . . . . . .20 Addressable IR Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 One x Eight Addressable IR Router . . . . . . . . . . . . . . . . . . .22 Dual-Gang Plastic Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 Remote A/B Speaker Relay Module . . . . . . . . . . . . . . . . . . .21 Sunscreen Filter for 480 Dinky Link Receiver . . . . . . . . . . . .32 Sunscreen Filter for 490 Micro Link Receiver . . . . . . . . . . .32 Sunscreen Filter for 780 J-Box Rec. and VCIR . . . . . . . . . . .32 Test-IR™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Light Isolation Extension Tube for 490 . . . . . . . . . . . . . . . . .32 Programmable Learning Remote - Black . . . . . . . . . . . . . . .10 Programmable Learning Remote - Platinum . . . . . . . . . . . . .10 Programmable Learning Remote - Platinum . . . . . . . . . . . . .10 Match Maker™ Speaker Volume Control w/IR Rec - White .29 CFL Match Maker™ Speaker Vol Cntlr w/IR Rec - White . . .29 Two-Zone Connecting Block . . . . . . . . . . . . . . . . . . . . . . . . .27 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 35 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF 36 12950 BRADLEY AVE, SYLMAR CA 91342 • 818.362.0353 • FAX 818.362.9506 • ORDERS 800.843.5465 • ORDER FAX 800.492.6832 • WWW.XANTECH.COM RESIDENTIAL AND COMMERCIAL A/V DISTRIBUTION AND CONTROL SYSTEMS AND STUFF
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021