Panasonic PT-FX400U data projector Datasheet

PT-FW430 Series
LCD Projectors
PT-FW430U
PT-FX400U
Long-Lasting Brightness and
Excellent Cost Savings
Durable Performance
The Panasonic PT-FW430 Series boasts high
performance with minimal maintenance over
time. Its highly reliable optical system and
dust-resistant structure provide a long operating life. Advanced Panasonic technologies, such
as Daylight View Premium, ensure excellent
projected images. The PT-FW430 Series models
are equipped with many ecology-conscious
features, starting with Eco Management functions that reduce wasteful power consumption.
These high-quality projectors also support wireless projection from not only PCs but also iPads
and other devices for easy use (optional).* 1
Superb installation flexibility, thanks to the
2x zoom lens and horizontal/vertical lens shift,
also makes the PT-FW430 Series ideal for both
first-time installation and as replacement units.
PT-FW430U
3,500 lm
WXGA
Side-by-Side Wireless Function
PT-FX400U
(optional)
4,000 lm
XGA
Wireless Function
(optional)
* 1 The optional Wireless Module E T-WM200U is required.
1
Reliability and Easy Maintenance
6,000-Hour Lamp Replacement Cycle * 2
formance. The intake and exhaust airflow paths are
straight, and the intake airflow path is provided with a
new Eco Filter unit to guard the optical components from
dust. This dust-resistant design keeps the air inside the
projector clean for long periods of time and minimizes
brightness degradation. The Eco Filter’s long replacement
cycle* 4 of 12,000 hours reduces the hassle of maintenance. And, as an environmental consideration, the filter
can be washed with water and reused.* 5
An original lamp drive system and a more durable new
lamp unit help maintain optimal lamp performance for
longer-lasting brightness than predecessor models.* 3 This
has resulted in a 6,000-hour lamp replacement cycle.
Dust-Resistant Design and an Eco Filter that
Needs No Replacement for 12,000 Hours
Extreme care has been taken in designing the dust-resistant structure inside the PT-FW430 Series cabinet. The
lens section, where dust enters, has been protected and
separated from the optical block, which is the heart of
the projector. Integrated molding of internal cabinet parts
has also been increased to further improve sealing perThe Eco Filter consists of two Micro Cut
Filters (electrostatic filters), a pre-filter
and a main filter, which use an ion effect
to collect extremely small dust particles.
The pre-filter has a honeycomb configuration and the main filter is pleated to
achieve a large surface area that raises
its dust collecting performance. Thanks
to these features, the Eco Filter has a
replacement cycle of 12,000 hours.
Inorganic Materials Maintain
Image Quality Longer
The PT-FW430 Series projectors’ optical block maintains
a high level of performance over time, due to the use of
inorganic materials in the
Inorganic
Polarizers
LCD panels and polarizers,
thus achieving a replacement From the
lamp
cycle of 12,000 hours. It
also makes them the logical
choice for a truly dependable
Inorganic
LCD Panels
To the screen
LCD projector system.
Main filter
Pre-filter
Superb and Ecological Performance
Detail Clarity Processor 3 Brings Depth and
Clarity to Details
according to the surroundings. This adjustment function
also works together with the Detail Clarity Processor 3 to
enhance the realism and vividness of projected images.
This makes images easier to view and offers high contrast.
The frequency of the video signal is analyzed for each
scene, and distribution data is extracted for the ultra
high, high, medium and low-range frequencies. This unique
Panasonic image correction circuit optimally enhances
each area of the screen. High-precision detection is
applied from 2-dimensional horizontal/vertical data to
produce more natural, lifelike images with high definition.
Eco Management Functions
A number of functions are provided to reduce power
consumption. They adjust the brightness according to
ambient light conditions, and reduce the lamp power
when there is no signal input or the
projector is in AV Mute mode. You can
easily set the Eco Management functions
according to operating conditions by using “ECO” button on
the remote control
the ECO button on the remote control.
Daylight View Premium for Better Color
Perception* 6
This function corrects the image quality to project sharp,
clear images even in brightly lit rooms. A luminance sensor measures the ambient brightness, and a real-time
adjustment function optimizes sharpness and brightness
Under bright conditions
Under dark conditions
Standby Mode: Eco* 7
Simulated image with Daylight
View Premium turned off.
The PT-FW430 Series has attained a low stand-by power
level of 0.3 W* 8 (standby mode: ECO). It also helps to
slash running costs, and reduces environmental impact.
Simulated image with Daylight
View Premium turned on.
2
Installation and Operation Flexibility
2x Zoom Lens and Horizontal/Vertical Lens Shift
ously distributed to multiple projectors. And the PT-FW430
Series models are compatible with PJLink™ (class 1) to
enable integrated control of systems that contain different
brands of PJLink™-compatible projectors.
The 2x zoom lens and horizontal/vertical lens shift let you
accommodate a wide range of room sizes and shapes.
When lights or ventilation holes are located in the ceiling
mounting site, you can simply relocate the projector to
avoid them. And when replacing existing projectors, this
can reduce costs by
6.9 m/22.6 feet
120-inch screen
permitting the use
of existing mounting
3.4 m/11.2 feet
positions and
NOTE: This illustration shows the projection
cablings.
distances of the PT-FW430U.
…
Room A
The optional Wireless Module ET-WM200U allows the
PT-FW430 Series to provide wireless projection of the
same images that are displayed on the PC screen. There
is no need to connect the PC with a VGA cable, so you
get smooth video presentations with any system layout
you want and it is also possible to transmit audio. Settings for wireless connection can be made quickly and
easily using Wireless Manager ME 5.5 software and you
can also simultaneously project the images from multiple
PCs up to 16 PCs using the “MultiLive mode.” The wireless LAN security
is also newly-compatible with the EAP
Interfaces include HDMI and DVI-I inputs. The serial terminal (RS-232C) has an Emulate function that lets you
continue using existing control systems when replacing
previous Panasonic models. It is also possible to output
audio during Standby mode. This is convenient when connecting an external audio system through the projector.* 9
2
3
4
5
Room C
Easy Wireless Projection from
Multiple PCs (Optional)
Abundant Connection Terminals,
Including HDMI
1
Room B
6
(Extensible Authentication Protocol)
(except for EAP-LEAP).
7
1
2
3
4
LAN connector
HDMI input
DVI-I input
Computer input
8
5
6
7
8
S-Video input
Video input
Serial input
Audio input 1
9
10
NOTE: Network functions such as Live mode and
Multi-Live mode can also be used with a wired LAN.
11
The wireless module
ET-WM200U mounted on
the projector
9 Audio input 2
10 Audio input 3
11 Audio output
Easy Remote Monitoring and Control
over a LAN
The PT-FW430 Series can be easily operated remotely
over a LAN, because it is done using the computer’s Web
browser. Furthermore, the projector sends an email message to notify the operator when an error has occurred,
or a lamp needs to be replaced. Panasonic’s original
freeware, “Multi Projector Monitoring and Control Software
Seminar room
Ver. 2.5,” allows the user to Auditorium
control and monitor multiple
projectors at the same time
over a LAN. This software
Lecture room
Classroom
also adds a new function that
allows still images and text
messages to be simultane-
Four-Window Multi
Style displays up to
four computer
screens at a time.
* 2 This value is calculated by continuously turning the lamp on for 2 hours and off for
0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on /off
more frequently, or if it is left on for longer intervals.
* 3 PT-F W300NT U / F W300U / F300NT U / F300U.
* 4 The usage environment affects the duration of the filter.
* 5 When washing with water, please follow the procedures listed in the operating
instructions. Also, we recommend replacing the filter with a new one after it has been
washed and reused twice. If the filter is not sufficiently clean after washing, replace
it with a new one.
Four-Window
Index Style displays
thumbnails of four
computer screens.
16-Window Index
Style displays
thumbnails of 16
computer screens.
* 6 There is no actual change in the rated brightness or contrast ratio.
* 7 When the standby mode is set to ECO, network functions such as power on over the
L AN will not operate. Also, only certain commands can be received for external control using the serial terminal.
* 8 0.3 W at 100 –120 V AC. 0.4 W at 220 –240 V AC.
9
Audio
monitoring requires external speakers and an audio amplifier.
*
3
PT-FW430 Series — Long-Lasting Brightness and Excellent Cost Savings
Panasonic Wireless Projector for iOS
Effective Theft Prevention with the
Startup Logo
“Panasonic Wireless Projector for iOS”
application, which is free and available on
the App Store, allows wireless projection
from an iPad, iPhone or iPod touch. When
a JPEG or PDF file is opened, the image is
sent to the projector and displayed. Presentations can be done using only the wireless projector
and an iPad, iPhone or iPod touch. Various touch screen
operations, such as rotating the direction of the screen,
flicking to turn pages, and pinching to zoom in or out,
are possible. iPad 1G, iPhone 3GS/4 and iPod touch
3G/4G devices with iOS 4.1/4.2 are supported.
You can change the default Panasonic
start up logo to any logo you want, such
as your company’s logo for example. A
new logo can be easily uploaded by connecting a computer to the projector through the LAN or
serial connection by using the Logo Transfer Software* 11.
An abundance of other security measures are also included, such as a security bar, a user password, a control
panel lock, and text superimposing. This is very effective
for preventing theft.
Quiet, 29 dB* 12 Operation
The 29 dB* 12 silent design ensures that you won’t be
bothered by fan noise during operation. It also lets
listeners focus on what the presenter is saying as well as
what is being shown on the projection screen.
Easy Lamp and Air Filter Replacement
For easier maintenance, you can
replace the lamp from the rear and
the air filter through the side panel,
even after the projector is installed on
the ceiling. Furthermore, the replacement lamp unit ET-LAF100A can be
used with all of the Panasonic
PT-F100/F200/F300 Series projectors,
for efficient lamp purchase planning.
Side-by-Side Function* 10
The PT-FW430U can simultaneously display images from
two sources onto a single screen. For example, you can
display a PC image on the left and a video image on the
right. Taking advantage of the widescreen projection, this function gives
you a host of new application possibilities to explore.
Other Valuable Features
Scheduling Function
• Picture mode selection (standard/dynamic/natural/cinema/whiteboard/blackboard): whiteboard and blackboard
modes are convenient when projecting in rooms that
do not have a screen.
• AV mute for image/sound muting
• Selectable 17-language onscreen menu
• Menu lock function
• Built-in closed caption decoder
Scheduled operation is possible using the built-in timer
function, without having to use a PC and software.
Direct Power Off
The cooling fan continues to operate even when the main
power switch is turned off after projection is finished.
This also allows the power to be turned off by directly
switching off the room’s main breaker for systems, such
as ceiling mounted systems, where the main power
switch cannot be reached.
Ecology-conscious Design
Panasonic works from every angle to minimize environmental impact in the
product design, production and delivery processes, and in the performance
of the product during its life cycle. The PT-FW430 Series projector reflects
the following ecological considerations.
15m (49ft) Long-Range Wireless
Remote Control
• No halogenated flame retardants are used in the cabinet.
• Non-coated cabinet for easy recycling.
• Lead-free solder is used to mount components to the printed circuit
boards.
• Lamp power switching further reduces power consumption.
• “ECO” button on the remote control.
• Standby power consumption of only 0.3 W * 8 has been achieved (standby
mode: ECO)* 7.
• Auto Power Save activates standby mode when no signal is input.
• RoHS compliant
A unique ID number can be assigned to each
projector using the supplied wireless remote
control unit. This allows operation of a desired
projector when multiple units are set up at the
same location. Three frequently used functions
can be assigned to the Function buttons for
instant recall.
All PT-FW430 Series projectors are carefully manufactured at
the Panasonic factory in Japan, under strict quality control. This
is another, very important advantage of a Panasonic projector.
* 10 This function is not effective for some source combinations.
* 11 Still images that can be uploaded are limited to 1024 x 768 pixel bitmap files. Also,
the application will reduce the number of colors to 191.
* 12 When the lamp mode is set to ECO ; 33 dB when the lamp mode is set to Normal.
Measurement, measuring conditions and method of notation all comply with ISO
21118 international standards.
4
Specifications
PT-FW430U
Power supply
100 – 240 V AC, 3.9 –1.4 A, 50/60 Hz
Power consumption
330 W (0.3 W at 100 –120 V AC, 0.4 W at 220 –240 V AC when standby mode set to eco* 1 ,
9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.)
18.9 mm (0.74 inches) diagonal (16:10 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels
Stripe
20.3 mm (0.8 inches) diagonal (4:3 aspect ratio)
Transparent LCD panel (× 3, R/G/B)
786,432 (1,024 × 768) × 3, total of 2,359,296 pixels
Stripe
Lens
Manual 2× zoom (throw ratio: 1.34 – 2.68:1),
manual focus F 1.7 – 2.6, f 21.6 – 43.0 mm
Manual 2× zoom (throw ratio: 1.48 –2.96:1),
manual focus F 1.7– 2.6, f 24.0 – 47.2 mm
Lamp
250 W UHM lamp (The lamp replacement cycle is 6,000 hours.* 2 )
Panel size
Display method
Pixels
Pixel configuration
LCD panel
Screen size (diagonal)
Brightness*
3
0.84 –7.62 m (33 – 300 inches), 16:10 aspect ratio
0.84 –7.62 m (33 – 300 inches), 4:3 aspect ratio
3,500 lm (lamp mode: normal)
4,000 lm (lamp mode: normal)
Center-to-corner uniformity* 3
80%
Contrast* 3
600:1 (full on/full off)
Resolution
1,280 × 800 pixels (Input signals that exceed this
resolution will be converted to 1,280 × 800 pixels.)
Scanning
frequency
HDMI/DVI-I (digital)
DVI-I (analog)/RGB
YPBPR (YCBCR)
Video/S-Video
fH:
fH:
fH:
fH:
fH:
fH:
fH:
fH:
fH:
±51% from center of screen (manual)
±24% from center of screen (manual)
Keystone correction range
Vertical: ±30°
Installation
Ceiling/desk, front/rear
Built-in speaker
Output power: 5.0 W (monaural)
Projection size
(diagonal)
0.84 m
33˝
1.02 m
40˝
2.03 m
80˝
3.05 m
120˝
5.08 m
200˝
7.62 m
300˝
Projection size
(diagonal)
Projection distance
Min
Max
(wide)
(telephoto)
PT-FW430 - U (16:10)
1.9
–
0.84 m
(6.4)
(–)
33˝
2.4
1.2
1.02 m
(7.8)
(3.8)
40˝
4.8
2.4
2.03 m
(15.7)
(7.8)
80˝
7.2
3.6
3.05 m
(23.6)
(11.9)
120˝
12.0
6.1
5.08 m
(39.5)
(19.9)
200˝
18.1
9.1
7.62 m
(59.3)
(29.9)
300˝
HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) – WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 –146.25 MHz;
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-I 29-pin × 1
DVI-I IN
Digital: (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/60p, 1080/50p,
VGA (640 × 480) – WSXGA+ (1,680 × 1,050), compatible with non-interlaced signals only;
dot clock: 25.2 –146.25 MHz;
Analog: (RGB/YPBPR (YCBCR))
COMPUTER (RGB) IN D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1)
VIDEO IN
RCA pin × 1 (composite video)
S-VIDEO IN
Mini DIN 4-pin × 1 (S-Video)
AUDIO IN 1
M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 2
M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 3
RCA pin × 2 (L, R × 1), 0.5 Vrms
AUDIO OUT
M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable)
SERIAL IN
D-sub 9-pin (female) × 1 for external control (RS-232C compliant)
LAN
RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
WIRELESS MODULE Connector for optional wireless module ET-WM200U × 1
430 × 125.5* 4 × 323 mm (16-15/16˝ × 4-15/16˝ * 4 × 12-23/32˝ ) (Protruding parts not included)
Weight
Approximately 6.0 kg (13.2 lbs.)
Operating environment
Operating temperature: 0°C – 40°C (32°F– 104°F)* 5 ; operating humidity: 20%–80% (no condensation)
Supplied accessories
Power cord, wireless remote control unit, batteries (AA type × 2), software CD-ROM (Logo Transfer
Software, Multi Projector Monitoring & Control Software Ver. 2.5, Wireless Manager ME 5.5)
* 1 When the standby mode is set to eco, network functions such as power on over the
LAN will not operate. Also, only certain commands can be received for external control
using the serial terminal.
* 2 This value is calculated by continuously turning the lamp on for 2 hours and off for
0.25 hours. The lamp replacement cycle will decrease if the lamp is turned on/off
more frequently, or if it is left on for longer intervals.
Projection distance
Min
Max
(wide)
(telephoto)
1.8
–
(6.0)
(–)
2.3
1.1
(7.4)
(3.6)
4.6
2.3
(14.9)
(7.4)
6.9
3.4
(22.5)
(11.2)
11.5
5.7
(37.6)
(18.8)
17.2
8.6
(56.5)
(28.3)
Height from edge
of screen to center
of lens
0 – 0.45
(0 – 1.5)
0 – 0.54
(0 – 1.8)
-0.01 – 1.09
(0 – 3.6)
-0.02 – 1.63
(-0.1 – 5.3)
-0.03 – 2.73
(-0.1 – 8.9)
-0.05 – 4.09
(-0.2 – 13.4)
PT-FX400U (4:3 aspect ratio; throw ratio: 1.48–2.96:1)
HDMI IN
Molded plastic (PC+ABS)
unit: meters (feet)
PT-FW430U (16:10 aspect ratio; throw ratio: 1.34–2.68:1)
±50% from center of screen (manual)
±27% from center of screen (manual)
Dimensions (W × H × D)
3 2 3 ( 12-2 3 / 3 2 )
Projection Distance
1,024 × 768 pixels (Input signals that exceed this
resolution will be converted to 1,024 × 768 pixels.)
Cabinet materials
unit: millimeters (inches)
4 3 0 ( 16 -15 / 16 )
27.0 kHz – 68.7 kHz; f V : 24 .0 Hz – 85.0 Hz; dot clock: 25 .2 MHz– 148.5 MHz
15 .6 kHz – 91.1 kHz; f V : 24 .0 Hz – 85.1 Hz; dot clock: 162 MHz or lower
f H : 33.75 kHz; f V : 60 Hz (1080 [1125]/60i)
15.75 kHz; f V : 60 Hz (480i [525i])
f H : 28.13 kHz; f V : 50 Hz (1080 [1125]/50i)
31.50 kHz; f V : 60 Hz (480p [525p])
f H : 27.00 kHz; f V : 24 Hz (1080 [1125]/24p)
15.63 kHz; f V : 50 Hz (576i [625i])
f H : 33.75 kHz; f V : 30 Hz (1080 [1125]/30p)
31.25 kHz; f V : 50 Hz (576p [625p])
f H : 67.50 kHz; f V : 60 Hz (1080 [1125]/60p)
37.50 kHz; f V : 50 Hz (720 [750]/50p)
f H : 56.25 kHz, f V : 50 Hz (1080 [1125]/50p)
45.00 kHz; f V : 60 Hz (720 [750]/60p)
15.75 kHz; f V : 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), f H : 15.63 kHz; f V : 50 Hz (PAL/PAL-N/SECAM)
Optical axis shift Vertical
Horizontal
Terminals
Dimensions
PT-FX400U
12 5 . 5
( 4 -15 / 16 )
Model
Height from edge
of screen to center
of lens
0 – 0.50
(0 – 1.7)
0 – 0.61
(0 – 2.0)
0 – 1.22
(0 – 4.0)
0 – 1.83
(0 – 6.0)
0 – 3.05
(0 – 10.0)
0 – 4.57
(0 – 15.0)
Optional Accessories
PT-FX400 - U (4:3)
ET-PKF110H
Ceiling mount
bracket for
high ceilings
ET-WM200U
Wireless module
ET-PKF110S
Ceiling mount bracket
for low ceilings
ET-EMF100
Replacement
filter unit
ET-LAF100A
Replacement
lamp unit
* 3 Measurement, measuring conditions and method of notation all comply with ISO
21118 international standards.
* 4 With legs at shortest position.
* 5 The operating temperature range is 0°C to 35°C (32°F to 95°F) when used in HighAltitude mode (1,400 m to 2,700 m (4,593 ft to 8,858 ft)).
NOTES ON USE
1. Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, malfunction or electric shock.
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or
extended use.
3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions:
• Never place objects on top of the projector while it is in operation.
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s intake and exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to installation where only one
projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C (104°F). Also, make sure
the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake.
4. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.
• The brightness of the lamp will gradually decrease with use.
5. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance.
Freeware
Multi Projector
Monitoring and
Control Software
Ver. 2.5
For more information about Panasonic projectors
http://panasonic.net/avc/projector
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice. Product availability
differs depending on region and country. This product may be subject to export control regulations. The projection distances and throw ratios
given in this brochure are for use only as guidelines. For more detailed information, please consult the dealer from whom you are purchasing
the product. Also, the throw ratios shown are the values for an 80-inch image size (measured diagonally). The throw ratio varies depending
on the diagonal image size. The PJLink trademark is an application trademark in Japan, the United States, and other countries and regions
or registered trademarks. All other trademarks are the property of their respective trademark owners. Projection images simulated.
© 2011 Panasonic Corporation. All rights reserved.
JQA-QMA14392
EC98J2010
051
Factories of Business Solutions Business Group have received ISO
14001:2004—the Environmental Management System certification
(except for third parties’ peripherals).
All information included here is valid as of July 2011.
PT-FW430U2 Printed in Japan.