PICMG
2.30 since
2009
100 %
PCI compatibility
PICMG
2.0 since
1995
> 30
suppliers
Availability of
7+ years
SIL 4 solutions
Up to
60 W per 3U slot
Operating
temperatures
– 40 to
+ 85 °C
PICMG
CPCI-S.0 since
2011
> 12 Gb/s data rate
4
3U CompactPCI PlusIO
F26L - Intel Atom Apollo Lake-I
CPU Board
»
»
»
»
»
»
»
»
»
Intel E3900 series CPU with up to four cores
Up to 8 GB DDR3 RAM soldered, ECC
CPU TDP 6.5 W to 12 W
Front I/O: 2 Gb Ethernet, 2 USB 3.0, 1 VGA
Rear I/O: 2 Gb Ethernet, 4 PCIe x1, 4 USB 2.0
microSD card and mSATA slots
Trusted Platform Module (TPM)
Side card connector for high flexibility and interface extensions
Up to -40°C to +85°C screened
3U CompactPCI PlusIO
F23P – Intel Core i7 4th gen
CPU Board
»
»
»
»
»
»
»
»
Intel Core i7, 4th generation, Quad-core processor
Up to 32 GB DDR3 DRAM soldered, ECC microSD card and mSATA slots
Front I/O: VGA, 2 Gbit Ethernet, 2 USB
Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
Other I/O (onboard, side card): SATA, HDMI/Display Port, HD audio,
USB, UART etc.
2.4 to 3.4 GHz Turbo Boost, Hyper-Threading, Active Management Technology
Open CL support
3U CompactPCI PlusIO
F22P – Intel Core i7 3rd gen
CPU Board
»
»
»
»
»
»
»
»
Intel Core i7, 3rd generation, Quad-core processor
Up to 16 GB DDR3 DRAM soldered, ECC microSD card and mSATA slots
Front I/O: VGA, 2 Gbit Ethernet, 2 USB
Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
Other I/O (onboard, side card): SATA, SDVO, HDMI/Display Port, HD audio,
USB, UART etc.
2.3 to 3.3 GHz Turbo Boost, Hyper-Threading, Active Management Technology
Open CL 1.1 support
3U CompactPCI PlusIO
F21P – Intel Core i7 2nd gen
CPU Board
»
»
»
»
»
»
»
»
Intel Core i7, 2nd generation, Quad-core processor
Up to 16 GB DDR3 DRAM soldered, ECC microSD card and mSATA slots
Front I/O: VGA, 2 Gbit Ethernet, 2 USB
Rear I/O: 4 PCIe, 4 USB, 4 SATA, 1 Gbit Ethernet
Other I/O (onboard, side card): SATA, SDVO, HDMI/Display Port, HD audio,
USB, UART etc.
2.0 to 3.0 GHz Turbo Boost, Hyper-Threading, Active Management Technology
Open CL 1.1 support
3U CompactPCI
F11S – Intel Atom CPU Board
»
»
»
»
»
»
»
»
»
»
Intel Atom Z510P, Z530P, Z510PT, Z520PT
Up to 2 GB DDR2 SDRAM
2 MB SRAM
CompactFlash microSD slot
1 SATA interface via rear I/O
VGA, 2 USB, PS/2, 1 UART
1 Gigabit and 1 Fast Ethernet
FPGA for individual user I/Oat rear
–40 °C to +85 °C screened or with qualified components
3U CompactPCI
F218 – PowerPC MPC8314 Slave
CPU Board
»
»
»
»
»
»
»
»
»
PowerPC MPC8314, 266 MHz
4HP peripheral slot or stand-alone function
Host CPU communication via Ethernet
Ultra fast boot < 2 seconds
Flexible FPGA-Flash structure
256 MB SDRAM, 16 MB Flash
Front I/O: 2 Gb Ethernet, 1 UART via SA-Adapter
Rear I/O: user-defined via FPGA (option)
–40 °C to +85 °C with qualified components
3U CompactPCI PlusIO
F50P – PowerPC MPC8548
CPU Board
»
»
»
»
»
»
»
»
»
»
MPC8548 (or MPC8543), up to 1.5 GHz
8 HP or 12 HP with front I/O
Up to 2 GB (ECC) DDR2 SDRAM
Up to 128 KB FRAM, 2 MB SRAM
Up to 16 GB SSD Flash
Standard front I/O: 2 Gb Ethernet, 2 USB
Standard rear I/O: 4 USB, 2 SATA
FPGA for user-defined I/O functions (option)
MENMON BIOS for PowerPC cards
–40 °C to +70 °C (8 HP) (screened)
5
6
3U CompactPCI
F205 – M-Module Carrier Board
»
»
»
1 CompactPCI bus slot
2 M-Module slots
-40°C to +85°C versions with qualified components
3U CompactPCI
F206 – Octal UART for RS232,
RS422, RS485
3U CompactPCI
F207 – PCI-104 Carrier Board
»
»
»
»
»
»
»
»
»
Octal 16450 UART
RS232/RS422/RS485, isolated/not isolated
Physical layer via SA-Adapters
Large receive and transmit FIFOs
Very high data rates up to 115 kBit/s
Full handshake support
Hardware flow control for RS485 half duplex
Also for other protocols like HDLC
–40 °C to +85 °C with qualified components
»
»
»
»
»
1 PCI-104 slot
For stacking of up to 4 PCI-104 modules
8 HP CompactPCI with one PCI-104 module
PCI-to-PCI bridge
–40 °C to +85 °C with qualified components
3U CompactPCI
F211 – Quad Fast Ethernet
Interface
»
»
»
»
»
4 full-duplex or half-duplex channels
10BASE-T and 100BASE-TX physical layer
Fully integrated to comply with IEEE802.3u
1500 V isolation voltage
–40 °C to +85 °C qualified
3U CompactPCI
F212 – PCIe Mini Card Carrier for Wireless Functions
»
»
»
»
»
Up to 2 PCI Express Mini Cards
ExpressCard/34 or 54 modules optional
For cards with internal USB interface
For HF applications (WLAN, UMTS, GPS, GSM, HSDPA)
–40 °C to +85 °C with qualified components
3U CompactPCI
F213 – PMC Carrier
»
»
»
1 32-bit/33-MHz or 66-MHz PMC slot
Optional Mini PCI card slot
–40 °C to +85 °C with qualified components
3U CompactPCI
F215 – Universal Interface Board
»
»
»
»
»
5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 binary I/O port
Other function combinations via FPGA IP cores
For protocols/physical layers like RS232/RS422/RS485, HDLC, InterBus-S, CAN bus, binary I/O
Physical layers via SA-Adapters
–40 °C to +85 °C with qualified components
3U CompactPCI
F216 – Octal UART
»
»
»
»
»
»
»
Octal 16550 UART
RS232/422/485, isolated
Large receive and transmit FIFOs
Very high data rates up to 921 600 bit/s
Full handshake support
Hardware flow control for RS485 half duplex
–40 °C to +85 °C with qualified components
3U CompactPCI
F223 – PCIe Mini Card Carrier for
Wireless Functions
»
»
»
»
»
»
2 PCI Express Mini Cards (full-/half-size)
For wireless applications (WLAN/WAP, UMTS, GPS, GSM, HSDPA, LTE)
2 or 3 external antennas per module (reverse SMA)
Up to 18 SIM card slots
For cards with internal PCI Express and USB interface
–40 °C to +85 °C screened, conformal coating
3U CompactPCI
F305 – Quad Fast Ethernet /
Real-Time Ethernet Interface
»
»
»
»
»
»
»
4 Ethernet channels, 100 Mbit/s
Real-time Ethernet capability
Optical isolation from other cards
-40°C to +85°C qualified
Conformal coating
For rolling stock and wayside applications
Compliant with EN 50155 (railways)
7
8
3U CompactPCI
F403 – Binary I/O Card for Railways
»
»
»
»
»
»
»
»
»
»
16 bidirectional binary I/Os
Organized in 4 optically isolated groups
Connected via spring cage terminal blocks
Reduced wiring for fast installation
I/O voltage range 14.4 VDC to 154 VDC
Current output 1 A at 24 V
Driver support for all common operating systems
–40 °C to +85 °C with qualified components
Conformal coating
Compliant with EN 50155 (railways)
3U CompactPCI
F701 – MVB Interface Card
»
»
»
»
»
»
MVB Interface EMD/ESD+ according to IEC 61375 (TCN Standard)
MVB Bus Administrator
4096 Process Data ports
Message Data stack
Driver support for WinXP, Win7 32/64bit and Linux
–40 °C to +70 °C screened
3U CompactPCI
F750 –CANopen Interface Board
»
»
»
»
»
»
Full CAN/Extended CAN according to ISO-11898
CANopen master and slave by loadable firmware
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
3U CompactPCI
F751 – DeviceNet Interface Board
»
»
»
»
»
»
DeviceNet interface according to ISO-11898
DeviceNet master and slave by loadable firmware
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
3U CompactPCI
F752 – Real-Time Ethernet
Interface Board
»
»
»
»
»
»
»
»
»
»
Up to 100 MBit/s real-time Ethernet depending on loaded firmware for:
»
»
PROFINET (Controller & Device)
EtherCAT (Master & Slave)
Ethernet PowerLink (Controlled Node)
EtherNet/IP (Scanner & Adapter)
OpenModbus (Server & Client)
Sercos (Master & Slave)
VARAN (Client)
Based on netX universal network controller
Optical isolation with 1000 VDC isolation voltage
Driver support for all common operating systems
0 °C to +70 °C screened
3U CompactPCI
F753 – PROFIBUS Interface Board
»
»
»
»
»
»
Isolated RS485 interface
PROFIBUS DP master, DP slave and MPI device determined by loadable firmware
Based on netX universal network controller
Isolation with 1000 VDC voltage
Driver support for all common operating systems
–20 °C to +70 °C screened
9
10
3U CompactPCI Serial
G25A – Intel Xeon D CPU Board
»
»
»
»
»
»
»
»
Intel Xeon D-1500, up to 16 cores
Up to 32 GB DDR4 DRAM soldered, ECC
2 10 Gb Ethernet, 1 Gb Ethernet, 1 USB 3.0, 1 RS232 for configuration microSD card slot
Standard rear I/O: 28 PCIe lanes, 2 USB 3.0, 6 SATA, 4 Gb Ethernet
VGA, RS232, RS422/485 and USB 3.0 available on special I/O board
Built-in Intel VT hardware virtualization
Trusted Platform Module (TPM)
3U CompactPCI Serial
G23 – Intel Core i7 4th gen
CPU Board
»
»
»
»
»
»
»
Intel Core i7, 4th generation, Quad-core processor
Up to 32 GB DDR3 DRAM soldered, ECC mSATA and microSD card slots
Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB 3.0
Standard rear I/O: 7 PCIe, 8 USB 2.0, 2 USB 3.0, 5 SATA, DisplayPort/HDMI
Rear I/O via mezzanine board: up to 8 Gigabit Ethernet
Intel Turbo Boost, Hyper-Threading, AMT 9.0, Open CL support
3U CompactPCI Serial
G22 – Intel Core i7 CPU Board
»
»
»
»
»
»
»
Intel Core i7, 3rd generation, Quad-core processor
4 or 8 GB DDR3 DRAM soldered, ECC mSATA and microSD card slots
Standard front I/O: 2 DisplayPorts, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O: 7 PCIe, 4 USB 2.0, 4 USB 3.0, 5 SATA, DisplayPort/HDMI
Rear I/O via mezzanine board: up to 8 Gigabit Ethernet
Intel Turbo Boost, Hyper-Threading, AMT 8.0, Open CL support
3U CompactPCI Serial
G52A – QorIQ Network CPU Board
»
»
»
»
»
»
NXP/Qualcomm QorIQ, up to 12 cores
Up to 12 GB DDR3 DRAM soldered, ECC
»
Standard front I/O: 2 10 Gb Ethernet, 1 Gb Ethernet, 1 USB 2.0 host, 1 USB
configuration port (RS232)
Standard rear I/O: 14 PCIe lanes, 1 USB 2.0, 2 SATA, 3 Gb Ethernet microSD card slot
CPU TDP from 32 W to 61 W
Board Management Controller, Watchdog
3U CompactPCI Serial
GX1 – PCI Express Switch or
Switch Fabric
»
»
»
»
»
»
»
»
64-Lane, 16-Port Express Switch or 65-Lane, 17-Port Switch Fabric
PCI Express Generation 3 switching over CompactPCI Serial
985 MB/s per lane for each point-to-point serial link
Programmable configuration of PCIe ports according to backplane design
Software tools for diagnostics and performance monitoring
Dedicated upstream links for multiple CPUs
Multicast / broadcast capability
Product configuration depending on project
3U CompactPCI Serial
G101 - Fully Managed Industrial
Ethernet Switch with Uplink,
A-Coded
»
»
»
»
»
»
»
Managed rugged Ethernet switch
Up to 25 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 22 ports on rear
29 Gbit/s carrier grade switch matrix
Special switch protocols
-40°C to +85°C with qualified components
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G102 - Managed Industrial Ethernet Switch with Uplink, X-Coded
»
»
»
»
»
»
»
Fully managed rugged Ethernet switch
Up to 25 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 22 ports on rear
29 Gbit/s carrier grade switch matrix
Special switch protocols
-40 to +85°C with qualified components
Compliant with EN 50155 (railways)
GE1 – 4-Port Gigabit Copper
Ethernet Line Card with PoE
Related Hardware for G101 / G102
»
»
»
»
»
»
4 Gigabit Ethernet on RJ45 connectors (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
IEEE 1588v2 supported (together with G101)
GE3 - 4-Port Gigabit Copper Ethernet Line Card with PoE
Related Hardware for G101 / G102
»
»
»
»
»
»
4 Gigabit Ethernet on M12 X-coded connectors (RJ45 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
-40 to +85°C (screened)
Compliant with EN 50155 (railways)
IEEE 1588v2 supported (together with G101)
11
12
GP1 – 4-Port Gigabit Ethernet PHY
Line Card with PoE
Related Hardware for G101 / G102
»
»
»
»
»
»
4 Gigabit Ethernet on RJ45 connectors (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
IEEE 1588v2 support (optional)
GP2 - 4-Port Gigabit SFP PHY
Line Card
GP3 - 4-Port Gigabit Copper Ethernet Line Card with PoE
Related Hardware for G101
»
»
»
»
»
»
100/1000 Mbit/s SFP modules supported
FX / SX / LX / ZX modules supported
4 SFP cages
LEDs for link and activity status
-40 to +85°C with qualified components
Compliant with EN 50155 (railways)
Related Hardware for G101
»
»
»
»
»
»
4 Gigabit Ethernet on M12 X-coded connectors (RJ45 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
-40 to +85°C (screened)
Compliant with EN 50155 (railways)
IEEE 1588v2 support (optional)
3U CompactPCI Serial
G301 – Unmanaged 4-Port
Rugged Industrial Ethernet Switch
»
»
»
»
»
»
»
Unmanaged 4-port rugged Ethernet switch
4 Gigabit Ethernet (front) on RJ45 (M12 optional)
Power over Ethernet (PoE) PSE (all ports)
LEDs for link and activity status
1 Gigabit Ethernet on rear I/O (optional)
–40 °C to +85 °C (screened)
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G303 – Unmanaged 16-Port
Rugged Industrial Ethernet Switch
»
»
»
»
»
»
Unmanaged 16-port rugged Ethernet switch
Up to 16 Gigabit Ethernet ports on rear I/O
Or 3 ports on front and up to 13 ports on rear
LEDs for front port and board states
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G304 – Unmanaged 4-Port ugged Industrial Ethernet Switch with PoE+
»
»
»
»
»
»
»
Unmanaged 4-port rugged Ethernet switch
4 Gigabit Ethernet (front) on RJ45 (M12 optional)
Power over Ethernet (PoE+) PSE (all ports)
LEDs for link and activity status
1 Gigabit Ethernet on rear I/O (optional)
–40 °C to +85 °C (screened)
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G201 – USB 3.0 Interface
»
»
»
4 USB 3.0 host interfaces
Data rate up to 5 Gbit/s per direction per port
–40 °C to +85 °C screened
3U CompactPCI Serial
G204 – M-Module Carrier Board
»
»
1 M-Module slot
–40 °C to +85 °C with qualified components
3U CompactPCI Serial
G211 – Quad Gigabit Ethernet
Interface
3U CompactPCI Serial
G211F – Quad Fiber Optics
Interface
3U CompactPCI Serial
G212 – PCIe Mini Card Carrier for Wireless Functions
»
»
»
»
»
»
»
Four 10/100/1000Base-T Ethernet channels
Alternatively two redundant channel pairs
Full-duplex or half-duplex
RJ45 or robust M12 connectors
Fully integrated to comply with IEEE802.3u
1500 V isolation voltage
–40 °C to +85 °C screened
»
»
»
»
»
»
Four optical transceiver channels 1000BASE-SX
Alternatively two redundant channel pairs
Full-duplex or half-duplex depending on transceiver
Fully integrated to comply with IEEE802.3x
500 V isolation voltage
–40 °C to +85 °C screened (without transceivers)
»
»
»
»
»
Up to 2 PCI Express Mini Cards (full-size)
ExpressCard/34 or 54 modules optional
For cards with internal PCIe and USB interface
For HF applications (WLAN, UMTS, GPS, GSM, HSDPA)
–40 °C to +85 °C screened
3U CompactPCI Serial
G213 – XMC/PMC Carrier
»
»
»
1 XMC slot (PCIe 2 x4 links) or 1 PMC slot (32/64 bits, 33/66/133 MHz, PCI-X)
–40 °C to +85 °C screened
13
14
3U CompactPCI Serial
G214 – Multi-Display Controller
3U CompactPCI Serial
G215 – Universal Interface Board
»
»
»
»
»
»
»
AMD Radeon E6760 GPU, 600 MHz
6 SIMD engines, 480 shaders, 1 GB integrated graphics RAM
AMD EyeSpeed, Eyefinity and HD3D technologies
DirectX 11, OpenGL 4.1, OpenCL 1.1
Up to 6 DisplayPort (4 DP 1.2, 2 DP 1.1a)
Max. resolution 4096x2560 at 60 Hz, 24 bpp or 3840x2400 at 60 Hz, 30 bpp
1 PCIe x8 CPU interface
»
»
»
»
»
5 interfaces at 8 HP front: 2 UARTs, 2 CAN bus, 1 binary I/O port
Other function combinations via FPGA IP cores
For protocols/physical layers like RS232/RS422/RS485, HDLC, CAN bus, IBIS,
GPS, binary I/O
Physical layers via SA-Adapters
–40 °C to +85 °C with qualified components
3U CompactPCI Serial
G227 - PCIe Mini Card Carrier for
Wireless Functions
3U CompactPCI Serial
G229 - Serial I/O Expansion Board
»
»
»
»
»
»
»
»
2 PCI Express Mini Card slots for LTE, UMTS, GSM, HSPA communication
2 external antennas per module (reverse SMA)
1 PCI Express Mini Card slot for WLAN, GPS, virtual SIM card, audio codec
1 external antenna optional
10 microSIM card slots
Software tool for switching SIM cards and remote power up/down of modems
-40 to +85°C screened
Conformal coating
»
»
»
»
»
»
Three USB 3.0 interfaces
One RS232 interface
One RS422/485 interface
One M.2 SSD slot
-40 to +85°C screened
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G403 - Binary I/O Card for Railways
3U CompactPCI Serial
G501 – SATA HDD/SSD Shuttle
»
»
»
»
»
»
»
»
»
16 bidirectional binary I/Os
Organized in 4 optically isolated groups
Connected via spring cage terminal blocks
Flexible I/O configuration
Individual edge-triggered interrupts
I/O voltage range 14.4 VDC to 154 VDC
Current output 1 A at 24 V
-40 to +85°C with qualified components
Compliant with EN 50155 (railways)
»
»
»
»
»
Hard disk drive or solid state drive shuttle
2.5" SATA HDD/SSD slot
Four status LEDs
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G503 – Dual SATA HDD/SSD
Shuttle and RAID Controller
»
»
»
»
»
»
»
Hard disk drive or solid state drive shuttle
Two 2.5" SATA HDD/SSD slots
SATA revision 3.x support
RAID 0, 1 and JBOD in hardware
2 ms HDD power hold-up time
–40 °C to +85 °C with qualified components
Compliant with EN 50155 (railways)
3U CompactPCI Serial
G504 - NVMe SSD Rapid Storage
Shuttle
»
»
»
»
»
»
Solid state drive shuttle
2.5" NVMe SSD U.2 slot
NVMe SSD M.2 slot (optional)
Two status LEDs
-40°C to +85°C screened
Compliant with EN 50155 (railways)
3U CompactPCI PlusIO
CT12 – Rear I/O Transition Module
»
»
»
»
»
CompactPCI PlusIO PICMG 2.30
3U / 100x80 mm standard format
2 Gigabit Ethernet
4 USB 2.0, 4 PCIe x1, 4 SATA
–40 °C to +85 °C qualified
3U CompactPCI
Extension Card Example for Intel based CPU Boards
»
»
»
»
»
»
4 HP extension with additional functions, e.g.
SATA/Legacy I/O
Multimedia
USB/COM
XMC/PMC
Gb Ethernet
15
16
MEN designs and builds reliable, safe computers for highly available and redundant safety-critical systems up to SIL 4 and DAL-A. Aside from incorporating doubled or tripled processors, the CPU cards feature redundant main memory, local voltage supply, FPGA technology, event logging, conduction cooling options and other safety relevant functions.
3U CompactPCI PlusIO
F75P – Safe Computer
6U CompactPCI
D602 – PowerPC Safe Computer
»
»
»
»
»
»
»
»
»
»
»
»
2 × Intel Atom E6xx, 512 MB DDR2 RAM (each) for onboard dual redundancy
1 × Intel Atom E6xx, 1 GB DDR2 for I/O
Independent supervisors for each block
Fail-safe board architecture
Clustering of two F75P to raise availability
Event logging
Certifiable up to SIL 4 (with report from TÜV SÜD)
SIL 4 certification packages available for hardware and software (QNX)
Developed according to EN 50129, EN 50128 and IEC
61508
Compliant with EN 50155 (railways)
–40 °C to +85 °C qualified
Conformal coating
»
»
»
»
»
»
»
»
»
»
»
3 × PowerPC 750 (lockstep mode), 3 × 512 MB DDR RAM
Fail-operational, fault-tolerant behavior
Fail-safe and fail-silent board architecture
Clustering of two D602 to raise availability
Board management, BITE
SEU (radiation) tolerant
Certifiable up to SIL 4 (with report from TÜV SÜD) and DAL-A
Developed according to RTCA DO-254, EN 50129 and IEC 61508
Compliant with EN 50155 (railways)
Up to –40 °C to +70 °C with qualified components
Convection or conduction cooling
MEN's rugged and reliable embedded computers withstand harsh environments with extreme temperatures, shock, vibration, dust, humidity and chemical influence.
MEN's electronics are designed for –40 °C to +85 °C and dissipate heat by convection or conduction cooling. Furthermore every Compact PCI/ Compact PCI Serial board can be equipped with a metal housing for conductive cooling if it is necessary.
Rackmount Enclosure for 3U
Cards with Conduction Cooling
»
»
»
»
»
»
»
»
»
For standard 3U cards within CCA frames
3-slot 3U backplane
System slot left, horizontal installation
Outline 200 mm x 350 mm x 145 mm
4 MIL-C-38999 connectors (59 user I/O pins)
PSU 18-32 V, 35 W
–40 °C to +70 °C (+85 °C) operating temperature
IP65 compliant
For –40 °C to +85 °C 3U CCA versions of MENs system slot and peripheral slot cards
Board Example for Customized Conduction Cooled Solutions
»
»
»
»
»
Rugged CCA frame
For all 3U system slot and peripheral slot cards
Customized solution for extreme conditions
Suitable for every CPU platform
Up to –40 °C to +85 °C operating temperature
17
18
3U 6 HP PSU
PU20/PU21 - Wide-Range
Power Supply Unit for Railway
Systems, 24 to 110 VDC,
100 to 240 VAC, 120 W
»
»
»
»
»
»
»
»
»
»
»
»
»
»
Wide range input 24 V DC to 110 V DC nominal
Input voltage range of 100 to 240 VAC
Configurable voltage range for 24, 36, 48, 74, 96 V DC
Output power 120 W without derating
Holdup time 10 ms (EN 50155 Class S2), holdup time 20 ms
Active power sharing
Redundant output voltage monitoring
Inverse current protection
H15 rear connector
-40°C to +85°C with qualified components
Conformal coating
Input voltage according to S-9401
Compliant to EN 50155 (railways)
Prepared for SIL applications
DO-160G Multipurpose
Airborne Device
MP70S – ARINC 600 Aircraft
Network Server
»
»
»
»
»
»
»
»
»
»
ARINC 600, 4MCU Housing with status display
Intel Core i7, quad-core 64-bit processor
16-port managed Gigabit Ethernet Switch
CompactPCI Serial Technology
2 rugged hot-plug HDD/SSD shuttles with locking support
2 antenna interfaces for WiFi and/or 3G/4G cellular interfaces
2 USB 3.0 interfaces for fast data loading
Multipurpose OLED graphic display
Display port, USB 3.0, GB Ethernet and 2 SIM card slots accessible via the front flap
Qualified according to DO-160G
menTCS Safe System Controller up to SIL 4
MH50C – Modular Train Control
System for ATO/ATC and ATP
»
»
»
»
»
»
»
»
»
»
SIL 4 Modular Train Control System menTCS
Certified safe CPU board with 3 CPUs
Certified safe I/O boards
QNX safe operating system available
Certification packages available
Extensible by distributed safe I/O boxes connected via real-time Ethernet
Optional MVB interface, RS232, RS422, RS485, CAN, GPS
Compact 40 HP application-ready system
Rack-mounted or wall-mounted
For rolling stock and wayside applications
Built-to-Order Platform
MH70R – Main Server for Railway
Data Center menRDC
»
»
»
»
»
»
»
Intel Xeon D-1500 (Broadwell DE) CPU with up to 16 cores
2 × 10 Gb Ethernet and 1 × 1 Gb Ethernet
3G/4G, wireless and GPS modem slots
Hot-swappable SATA Rev. 3.x HDD/SSD 2.5? slots
Optional redundant power supplies
Compact 40 HP application-ready rack- or wall-mounted system
Modular design, built-to-order configuration
Built-to-Order Platform
MH70I – Rugged 4U, 40 HP
Modular Industrial PC
»
»
»
»
»
»
»
»
»
»
»
Compact 40 HP application-ready system
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Intel Core i7 or Celeron with standard HMI graphics
Up to 16 GB DDR3 DRAM soldered, ECC
Up to four SATA hard disks for a RAID
Single or redundant power supplies or uninterruptible power supply (AC or DC)
2 CompactPCI slots for fieldbus functions, RS232, analog I/O, digital I/O, Ethernet
2 CompactPCI Serial slots for SATA RAIDs, Ethernet
2 PCI or PCI Express slots for half-length cards
Pre-configured operating system and drivers
Built-to-Order Platform
MH70S – Rugged 4U, 40 HP
Modular Data Storage System
»
»
»
»
»
»
»
»
»
»
»
Compact 40 HP turn-key system
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Intel Core i7 or Celeron, TPM optional
Up to 16 GB DDR3 DRAM soldered, ECC
Up to 20 TB storage capacity (depending on RAID level and HDD sizes)
Up to 5 hot-swappable HDD/SSD carriers in different RAID configurations
Single or redundant power supplies or uninterruptible power supply (AC or DC)
Optional PCI Express Mini Card slots for WLAN, GSM (2G), UMTS (3G), LTE (4G),
GPS or GLONASS functionality
Optional PoE PSE capable 4-port switch
Compliant to EN 50155 (railways)
Built-to-Order Platform
NH30 – Rugged 4U, 40 HP Modular Managed Gigabit Ethernet
Switch
»
»
»
»
»
»
»
»
»
Compact 4U, 40 HP turn-key Layer 2/3 switch solution
Rack-mounted or wall-mounted
Fanless operation or forced-air cooling
Single or redundant power supplies or uninterruptible power supply (AC or DC)
Up to six slots for RJ45, M12 (A or X-Coded) or SFP line cards
PoE+ / non-PoE power sourcing Ethernet ports in mixed configuration
Switch firmware production-ready installed
System supervision (temperature, fan, power supply) optional
Compliant with EN 50155 (railways)
19
20
Type
F75P
Safe SBC with onboard dual redundancy
CPU Performance
Scalability
3 × Intel Atom E6xx
(two Control Proc-essors, one I/O Processor)
Low end:
0.6 GHz, 3.3 W typ.
High end:
1.6 GHz, 4.5 W typ.
Compact-PCI /
PlusIO
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
F26L
SBC Intel Atom
Apollo Lake-I E3900
Series
Low end:
1.3 GHz, 6.5 W typ.
High end:
1.6 GHz, 12 W typ.
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
F23P
SBC
F22P
SBC
Intel Core i7, up to i7-4700EQ,
4th generation,
(64-bit CPU)
Intel Core i7, up to i7-3615QE,
3rd generation,
(64-bit CPU)
Low end:
1.5 GHz, 25 W typ.
High end:
4 GHz, 47 W typ.
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
Low end:
1.5 GHz, 17 W typ.
High end:
2.3 GHz, 45 W typ.
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
F21P
SBC
F11S
SBC
Intel Core i7, up to i7-2715QE,
2nd generation,
(64-bit CPU)
Low end:
1.1 GHz, 17 W typ.
High end:
2.1 GHz, 45 W typ.
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
PICMG 2.0 or CompactPCI PlusIO PICMG 2.30 or stand-alone
Intel Atom up to Z530P
Low end:
1.1 GHz, tbd W typ.
High end:
1.6 GHz, 2 W typ.
32-bit/33-MHz CompactPCI system slot, 1 CompactPCI slot
Memory max.
Interfaces Intel Technology Local Extensions Software
2 GB + 2 ×1 GB DDR2
DRAM (soldered), mSATA disk, 8 KB non-volatile FRAM
Standard front I/O:
VGA, 2 Fast Ethernet, 2 USB 2.0
Standard rear I/O:
1 PCIe, 4 USB, 1 SATA, 2 Fast
Ethernet
Functions like Hyperthreading disabled for deterministic behavior
8 GB DDR3 DRAM (soldered), microSD card, mSATA disk
16 GB DDR3 DRAM
(soldered), mSATA disk, microSD card
16 GB DDR3 DRAM
(soldered), mSATA disk, microSD card
16 GB DDR3 DRAM
(soldered), mSATA disk, microSD card
2 GB DDR2 DRAM, 2
MB SRAM, Compact-
Flash, microSD card
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 3.0
Standard rear I/O:
4 PCIe, 4 USB, 2 Gb Ethernet
Other I/O (onboard, side card):
SATA, DisplayPort, HD audio,
USB, PCIe
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb Eth.
Other I/O
(onboard, side card)
:
SATA, HD audio, USB, UART etc.
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb
Ethernet
Other I/O
(onboard, side card)
:
SATA, SDVO, HD audio, USB,
UART etc.
Standard front I/O:
VGA, 2 Gb Ethernet, 2 USB 2.0
Standard rear I/O:
4 PCIe, 4 USB, 4 SATA, 1 Gb Eth.
Other I/O
(onboard, side card)
:
SATA, SDVO, HD audio, USB,
UART etc.
Standard front I/O:
VGA, 1 Gb Ethernet, 1 Fast Ethernet, 2 USB 2.0, 1 COM, 1 PS/2
Other I/O:
1 UART, FPGA (Altera Arria or
Altera Cyclone) for user-defined
I/O functions
VT
Hyperthreading, VT,
AMT, Turbo Boost
Hyperthreading, VT,
AMT, Turbo Boost
Hyperthreading, VT,
AMT, Turbo Boost
QNX, Linux,
VxWorks,
VxWorks/
Cert, PikeOS
I/O extension cards:
F6xx
Windows
10, Linux,
VxWorks (on request), QNX
(on request)
I/O extension cards:
F6xx
Windows,
Linux see compare chart
3U CompactPCI /
PlusIO extension cards
Windows,
Linux
I/O extension cards:
F6xx
Windows,
Linux
I/O extension cards:
F6xx
Windows,
Linux
21
F50P
F218
Type
SBC
CPU
PowerPC up to
MPC8548
Performance
Scalability
Low end:
800 MHz, tbd W typ.
High end:
1.5 GHz, tbd W typ.
Compact-PCI /
PlusIO
32-bit/33-MHz CompactPCI system slot,
1 CompactPCI slot PICMG 2.0 or
PICMG 2.30
Slave CPU Board PowerPC MPC8314 266 MHz, tbd W typ.
32-bit/33-MHz CompactPCI peripheral slot,
1 CompactPCI slot
Memory max.
Interfaces
2 GB (ECC) DDR2
SDRAM, 128 KB
FRAM, 2 MB SRAM,
16 GB SSD Flash
Standard front I/O:
2 Gb Ethernet, 2 USB 2.0
Rear I/O: up to 3 Gb Ethernet, 4 USB 2.0, up to 2 SATA, up to 64 userdefined I/O lines
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
256 MB DDR2 DRAM,
16 MB Flash
Standard front I/O:
2 Gb Ethernet, 1 COM
Rear I/O:
80 GPIO lines
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Software
Linux,
VxWorks,
INTEGRITY
Linux,
VxWorks
22
CPU
F205
Type
M-Module Carrier
CompactPCI / PlusIO
1 CompactPCI slot
F206
Octal UART (16450) Nios Soft Core optional 32-bit/33..66-MHz 1
CompactPCI slot, 3.3V VIO
Memory max.
2 MB Flash, 16 MB DRAM
Interfaces
Onboard:
2 M-Module slots
Software
M-Module driver software
Standard configuration:
8 × UARTs for use with SA-Adapters
(RS232/422/485, isolated or not)
Other I/O:
FPGA (Altera Arria or Altera Cyclone) for user-defined I/O functions
Linux, VxWorks, Windows, QNX
23
24
F207
F211
F216
F223
F305
F212
F213
F215
PCI-104 Carrier
Fast Ethernet Interface
32-bit/33-MHz
1 CompactPCI slot (8 HP front panel) with one PCI-104 module
32-bit/33-MHz
1 CompactPCI slot
PMC Carrier 32-bit/33-MHz
1 CompactPCI slot
PMC Carrier 32-bit/33-MHz
1 CompactPCI slot
Universal Interface Board Nios Soft Core optional 32-bit/33-MHz
1 CompactPCI slot
Octal UART (16550)
PCI Express Mini Card Carrier
Fast Ethernet / Real-Time
Ethernet Interface
32-bit/33-MHz
1 CompactPCI slot
32-bit/33-MHz
1 CompactPCI slot
32-bit/33-MHz
1 CompactPCI slot
Onboard:
Up to 4 PCI-104 modules
PCI-104 driver software
Front I/O:
4 full/half-duplex 10BASE-T or 100BA-
SE-TX Ethernet
Windows, Linux, VxWorks, QNX
Front I/O:
4 Reverse SMA antenna connectors
Depending on PMC card / PCI mini card
2 MB Flash, 16 MB DRAM optional
Front I/O:
2 SMA for wireless applications
Onboard I/O:
One 32-bit/33-MHz or 66-MHz PMC or
PCI mini card, type III (A and B)
Depending on PMC card / PCI mini card
Standard configuration:
2 × CAN, 2 × UARTs, 1 × 8-bit GPIO for use with SA-Adapters
Other I/O:
FPGA (Altera Arria or Altera Cy-clone) for user-defined I/O functions
Front I/O:
8 × RS232/422/485, hardware- configurable
Linux, VxWorks, Windows, QNX
Windows, Linux, VxWorks, QNX
Front I/O:
Up to 6 SMA for wireless applications
(GPS, GSM, WLAN, UMTS, HSDPA)
Onboard I/O:
2 PCI Express Mini Card slots, 2 SIM card slots (expandable up to 18 slots total)
Front I/O:
4 full/half-duplex 10BASE-T or
100BASE-TX Ethernet on M12
Rear I/O
(option)
:
2 RT Ethernet channels,
MTCS connection
Windows, Linux
Windows, Linux, QNX
25
26
F403
F701
F750
F751
F752
F753
Binary I/O Card for Railways 32-bit/33-MHz
1 CompactPCI slot
MVB Interface Card (Multifunction Vehicle Bus)
Duagon 32-bit/33-MHz
1 CompactPCI slot
CANopen Interface Board Hilscher netX 100 32-bit/33-MHz
1 CompactPCI slot
DeviceNet Interface Board Hilscher netX 100 32-bit/33-MHz
1 CompactPCI slot
Real-Time Ethernet Interface
Board
Hilscher netX 100 32-bit/33-MHz
1 CompactPCI slot
PROFIBUS Interface Board Hilscher netX 100 32-bit/33-MHz
1 CompactPCI slot
8 MB SDRAM, 4 MB serial Flash
8 MB SDRAM, 4 MB serial Flash
8 MB SDRAM, 4 MB serial Flash
Front I/O:
16 binary inputs/outputs via 4 spring cage terminal blocks
Driver support for all operating ystems
Front I/O:
2 D-Sub 9-pin interfaces for
MVB connection
Windows, Linux
Front I/O:
1 CANopen Interface, 1 diagnostic interface
Windows, Windows CE, Linux,
VxWorks, QNX
Front I/O:
1 DeviceNet interface, 1 diagnostic interface
Windows, Windows CE, Linux,
VxWorks, QNX
Front I/O:
2 10BASE-T or 100BASE-TX Ethernet, 1 diagnostic interface
Windows, Windows CE, Linux,
VxWorks, QNX
8 MB SDRAM, 4 MB serial Flash
Front I/O:
1 PROFIBUS interface, 1 diagnostic interface
Windows, Windows CE, Linux,
VxWorks, QNX
27
28
G25A
Type
SBC
CPU
Intel Xeon D-1500, up to 16 cores
Performance
Scalability
Low end:
2 cores, 19 W typ.
High end:
16 cores, 45 W typ.
G23
SBC
G22
SBC
Intel Core i7, up to i7-
4700EQ, 2.4 GHz (64-bit
CPU), Intel technology:
Hyperthreading, VT, AMT,
Turbo Boost
Low end:
1.5 GHz, 25 W typ.
High end:
2.4 GHz, 47 W typ.
Intel Core i7, up to i7-3615QE,
2.3 GHz (64-bit CPU), Intel technology:
Hyperthreading, VT, AMT,
Turbo Boost
Low end:
1.5 GHz, 17 W typ.
High end:
2.3 GHz, 45 W typ.
G52A
SBC Freescale QorIQ T4240,
12 cores
1.5 to 1.8 GHz
CompactPCI Serial Slots Memory max.
Interfaces Software
CompactPCI Serial system slot or CompactPCI Serial peripheral slot
32 GB DDR4 DRAM
(soldered), ECC, microSD card
Standard front I/O:
2 10 Gb Ethernet, 1 Gb Ethernet, 1
USB 3.0
Standard rear I/O:
28 PCIe, 2 USB 3.0, 6 SATA, 4 Gb
Ethernet
Windows, Linux
CompactPCI Serial system slot or CompactPCI Serial peripheral slot
CompactPCI Serial system slot or CompactPCI Serial peripheral slot
CompactPCI Serial system slot or CompactPCI Serial peripheral slot
16 GB DDR3 DRAM
(soldered), microSD card
8 GB DDR3 DRAM
(soldered), microSD card
12 GB DDR3 DRAM
(soldered), microSD card
Standard front I/O:
2 DisplayPort, 2 Gb Ethernet,
2 USBn3.0
Standard rear I/O:
5 PCIe x1, 2 PEG x8, 8 USB 2.0,
2 USB 3.0, 6 SATA, 1 DisplayPort
Optional rear I/O
(mezzanine card)
: up to 8 Gigabit Ethernet
Standard front I/O:
2 DisplayPort, 2 Gb Ethernet,
2 USB 2.0
Standard rear I/O:
5 PCIe x1, 2 PEG x8, 4 USB 3.0,
4 USB 2.0, 6 SATA, 1 DisplayPort
Optional rear I/O
(mezzanine card)
: up to 8 Gigabit Ethernet
Windows, Linux
Windows, Linux
Standard front I/O:
2 10 Gb Ethernet, 1 Gb Ehternet,
1 USB 2.0, 1 RS232 configuration port (USB 2.0)
Standard rear I/O:
3 Gb Ethernet, 1 USB 2.0, 2 SATA,
1 PCIe x2, 3 PCIe x4
Linux
29
30
G303
G304
G101
Type Channel Management
PCI Express 3.0 Switch 25 x 1000BASE-T, or 24 x
1000BASE-T and 1 x 2.5 Gb
SFP
Fully Managed
G102
3U CompactPCI Serial 25 x 1000BASE-T, or 24 x
1000BASE-T and 1 x 2.5 Gb
SFP
Fully Managed
G301
3U CompactPCI Serial 4+1 x 1000BASE-T Unmanaged
3U CompactPCI Serial 16 x 1000BASE-T Unmanaged
3U CompactPCI Serial 4+1 x 1000BASE-T Unmanaged
PoE Dimensions
3U, 4 HP
Front Connector
RJ45 + SFP or M12 A-coded
Consumption Software
16 W Management firmware
3U, 4 HP RJ45 + SFP or M12 X-coded 16 W Management firmware
PoE up to 28 W
3U, 4 HP
3U, 4 HP
RJ45 or M12 A-coded
RJ45 or M12 A-coded
PoE+ up to 61.6 W
3U, 4 HP RJ45 or M12 X-coded
35 W (with PoE) No
15 W No
RJ45 or M12
X-coded
No
31
32
GE1
Type Channel
Gigabit Copper Ethernet
4x 1000BASE-TX
CompactPCI Serial Slots
Peripheral slot
PoE
PoE+ (optional) up to 61.6 W
GE3
Gigabit Copper Ethernet
4x 1000BASE-TX Peripheral slot PoE+ (optional) up to 61.6 W
GP1
Gigabit Ethernet PHY 4x 1000BASE-TX Peripheral slot PoE+ (optional) up to 61.6 W
GP2
Gigabit SFP PHY 4x 1000BASE-SX/LX/ZX Peripheral slot
GP3
Gigabit Ethernet PHY 4x 1000BASE-TX Peripheral slot PoE+ (optional) up to 61.6 W
Front Connector
RJ45 or
M12 (A-coded)
RJ45 or
M12 (X-coded)
RJ45 or
M12 (A-coded)
SFP
RJ45 or
M12 (X-coded
Consumption
5 W (without PoE)
85 W (with PoE)
5 W (without PoE)
85 W (with PoE)
5 W (without PoE)
85 W (with PoE)
5 W
15 W max. (depending on SFP)
5 W (without PoE)
85 W (with PoE)
33
34
G201
CPU Type
USB 3.0 Interface
CompactPCI Serial Slots
CompactPCI Serial peripheral slot
G204
M-Module Carrier
G211
Gigabit Ethernet Interface
CompactPCI Serial peripheral slot
CompactPCI Serial peripheral slot
G211F
Quad Fiber Optics Interface
G212
PCI Express MiniCard Carrier
CompactPCI Serial peripheral slot
CompactPCI Serial peripheral slot
G213
G214
XMC/PMC Carrier CompactPCI Serial peripheral slot
Multi-Display Controller GPU: AMD E6760 CompactPCI Serial peripheral slot
Memory max.
Interfaces
Standard front I/O:
4 USB 3.0 interfaces
Software
Windows, Linux
Standard front I/O:
1 M-Module slot
M-Module driver software
Standard front I/O:
4 full/half-duplex
1000BASE-T Ethernet on RJ45 or M12 connectors
Standard front I/O:
4 optical transceiver channels
1000BASE-SX
Windows, Linux
Windows, Linux
Standard front I/O:
Express Card 34 or Express Card 54 slots via 4 SMA for HF applications (GPS, GSM,
WLAN, UMTS, HSDPA)
Onboard I/O:
Up to 2 PCI Express MiniCards
Depending on PCIe MiniCard/ Express Card
Onboard I/O:
1 XMC slot (2 links x4), or 1 PMC slot (32-bit,
64-bit, PCI-X up to 133MHz)
Depending on XMC/PMC card
1 GB integrated graphics RAM
Standard front I/O:
4 DisplayPort 1.2 interfaces (+ 2 Display-
Port 1.1 interfaces op-tional via sideboard connector)
Windows
35
36
G229
G403
G501
G503
G504
G215
G227
Universal Interface Board Nios Soft Core optional Peripheral slot
PCI Express MiniCard Carrier Peripheral slot
Serial I/O Extension Board
Binary I/O for Railways
HDD/SSD Shuttle
HDD/SSD Shuttle and RAID
Controller
SSD Shuttle
Peripheral slot
Peripheral slot
1 CompactPCI Serial peripheral slot
1 CompactPCI Serial peripheral slot
Peripheral Slot
4 MB Flash,
Up to 64 MB DRAM
Standard configuration:
Two CAN, two UARTs, one 8-bit GPIO for use with SA-Adapters
(customizable via onboard FPGA)
Linux, VxWorks, Windows, QNX
Front:
Four SMA for HF applications
(GPS, GSM, WLAN, UMTS, HSPA)
Onboard:
Three PCI Express MiniCard slots
Front:
Four spring cage terminal blocks,
16 bidirectional binary I/Os
Depending on
PCIe MiniCard
Front:
Three USB 3.0, one RS232, one RS422/485
Onboard:
One M.2 SSD
Linux, Windows
Driver software not necessary
Onboard I/O:
1 ×2.5” SATA HDD or SSD
Driver software not necessary
Onboard I/O:
2 ×2.5” SATA HDD or SSD
Driver software not necessary
Onboard:
One 2.5” NVMe U.2 SSD or one
NVMe M.2 SSD
Driver software not necessary
37
38
CT12
Type
Transition Module Rear I/O
F11S, F19P, F21P, F50P, F75P
CompactPCI / PlusIO
Connected to CompactPCI for transition of rear I/O signals
F600
Side Card Legacy I/O 4 HP, connected to CompactPCI for power supply
F602
Side Card CompactPCI Express 4 HP, connected to CompactPCI for power supply
F603
Side Card USB/COM 4 HP, connected to CompactPCI for power supply
F606
Side Card Gb Ethernet 4 HP or 8 HP, connected to CompactPCI for power supply
* Only one SATA port can be used on the CT12 when combined with the CPU board F11S
For more information on the interoperability of the side cards with the respective CPU boards please see the Extension Card Compatibility Matrix.
Interfaces
2 Gb Ethernet, 4 USB 2.0, 4 PCIe x1, 4
SATA *
Local Extensions
1..4 UARTs via SA-Adapters
(RS232/422/485, isolated/not isolated)
2.5" SATA drive
4 PCI Express links x1, 1 USB, 1 DVI, 1
COM via SA-Adapter (RS232/422/485, isolated/not isolated)
2.5" SATA drive
2 USB 2.0, 1 COM 2.5" SATA drive
2 Gb Ethernet with Lemo connectors,
1 COM (option 2) via SA-Adaper
(RS232/422/485, isolated/not isolated)
2.5" SATA drive
Software
Depending on SBC
Windows, Linux, VxWorks, QNX
Windows
Windows, Linux, VxWorks, QNX
Depending on SBC
39
Due to the built-to-order concept and a high stockpiling of all components, the delivery time can be drastically reduced. Within a short time, customers receive their close-to-series prototypes and can immediately start developing their application. Based on standard versions, there are many various configuration options.
With MEN’s built-to-order configurator, ordering an individually configured System is as easy as pie. By choosing a basic unit with pre-configured functionality you can add all your necessary accessories from a range of components with compatible software and functionality.
Pre-selected functions indicate that they are required by your system. Article numbers are assigned depending on your drop-down selections, and a 100% identifiable product key is generated. After that you can order the system with your individual product key.
This process is suitable for small quantities and fast evaluation. For volume quotes higher than 25 systems please contact MEN sales directly.
40
Please find the several configurators on our website: www.men.de or www.menmicro.com »
Products
»
CompactPCI / Serial
»
Downloads & Media
41
42
It is MEN’s goal to find a tailored solution for the application together with our customers. While using as many COTS components as possible, parts of the solution may include customization:
» System level » Board level » Component level (in FPGA)
The Design Process
Custom design at MEN follows a defined development process from specification to design, verification and validation of a product, which is part of our quality management system according to DIN EN ISO 9001, EN/AS 9100 and IRIS.
The design process follows an adapted V-Model, depending on SIL level, and includes requirement tracing.
RAMS (Reliability, Availability, Maintainability and Safety) procedures are applied in the planning phase to avoid costly mistakes down the road.
COTS and Custom Design Expertise
Whether standard or custom, MEN products benefit from our unique development expertise:
»
Robust designs for harsh environments
»
Safety-critical designs in accordance with
IEC 61508, EN 50126, EN 50128, EN 50129, DO-245,
DO-178B, DO-254
»
Based on Intel, AMD, PowerPC and ARM architectures
»
Based on more than 50 proprietary cores in FPGA
»
Completed by real-world I/O
»
Supported by real-time software
Requirements
Analysis
System
Design
Architecture
Design
Module
Design
Acceptance
Test Design
System
Test Design
Integration
Test Design
Unit
Test Design
Design / Coding
System
Testing
Integration
Testing
Unit
Testing
Acceptance
Testing
43
Shipboard Command Desk
Command desks on ships use computer systems to control and monitor the engines and electric propulsion, electrical and hydraulic systems, navigation, communication and integrated platform management systems.
These computers are based on modular 40 HP systems like 3U CompactPCI using standard COTS components. A single board computer inside the
CompactPCI system is based on Intel Core 2 Duo architecture with two
64-bit processors and state-of-the-art PC interfaces like Ethernet and USB.
WLAN Server for Company Buses
A CompactPCI WLAN server supplies employees during their commute with passenger internet, local portals and passenger information services.
The complete Wi-Fi based entertainment solution uses carrier cards for two
PCIe Mini Cards and up to 18 SIM cards on one board. In case the data volume of one SIM card is depleted, an easy change to the next SIM card is possible.
The CompactPCI rack comes with a customized backplane and beside the SIM cards includes several GSM, GPS and UART interface cards. The system is controlled by an CompactPCI PlusIO SBC with an Intel Celeron M CPU.
44
Passenger Information Systems
Infotainment solutions give passengers orientation regarding stops, schedules and routes, hints for changing trains, short-term changes of the route or delays. They also provide entertainment, for instance by displaying news of the day and the weather forecast or by playing movies and music.
Content servers are used to store those data and programs. They connect to the screens in the vehicle via wired LAN or WLAN. Apart from displaying pictures, text and audio data, these systems can also control TV or radio programs. Content servers connect to the outside world, e.g. the depot, to receive up-to-date information while travelling.
Modular 40 HP systems like 3U CompactPCI or CompactPCI Serial are ideal for this type of application because they are flexible with regard to the board and feature combination and they are maintenance-friendly, e.g., offering hot-plug functionality. In combination with content servers, intelligent display computers are increasingly used to show the content.
CompactPCI made Robust
MEN‘s rugged and reliable embedded computers withstand harsh environments with extreme temperatures, shock, vibration, dust, humidity and chemical influence. MEN‘s electronics are designed for –40 °C to +85 °C and dissipate heat by convection or conduction cooling. The latter makes the enclosure itself a heat radiator and lowers maintenance efforts as well as protects the electronics from dust and water.
Our own environmental test laboratory helps us monitor and prove the quality of the products, among others using
HALT and HASS. To achieve the highest quality, the fully automated production is done in-house and includes traceability.
45
46
Being significantly involved in the standard specifications of CompactPCI, CompactPCI PlusIO and CompactPCI Serial, MEN, together with PICMG, will now also coordinate a new working group to extend the current CompactPCI Serial specification by a sub-standard covering the specific requirements for space applications.
The two main changes in the extension of the CompactPCI Serial specification are the definition of a dual star architecture for increased availability, and allowing the integration of different communication protocols common in space applications for both – the dual-star and the full-mesh network (which was formerly restricted to Ethernet only).
Space CompactPCI Serial allows the use of established industrial technology in space. This permits the cost-effective use of the latest technology also for space applications. The open standard guarantees the interoperability of different boards from different suppliers, and helps re-use solutions from mission to mission.
Development and production of rugged and reliable products
Our boards and systems are developed to meet requirements such as temperature ranges between
−40 and +85°C through convection or conduction cooling, shock, vibration, chemical influence or the option of coating against humidity right from the start.
Development based on quality management systems of our markets
We are certified according to ISO 9001 and ISO 14001, plus EN/AS 9100 (aerospace) and IRIS (railways) and provide systems according to ISO 7637-2 (road traffic) requirements. We develop according to the GRESS requirements by Airbus and are preparing for EFQM (European Foundation for Quality Management).
Development based on relevant standards know-how for our markets
Preparing products for environmental qualification according to vertical market standards is one of our key services, for example EN 50155 (railways), DO-160G (airborne), German Lloyd (ships) or ISO 7637-2
(automotive E-Mark).
Fully automated, high-quality in-house production
To achieve the highest product quality, our manufacturing and test process is fully automated. Vapor- phase soldering assures smooth processing of the components. Traceability is guaranteed by time stamps throughout the whole process.
All relevant environmental tests in-house
We carry out the preliminary qualifications in our own environmental test lab (temperature, shock, vibration, humidity), high-voltage and EMC chambers. Further calculations and analyses include MTBF,
FMEA, Hazard Tree, HASS or HALT.
FPGA technology expertise
FPGAs allow us to customize our hardware without touching the board layout while keeping costs low, even in small quantities. FPGA-based solutions are flexible, offer long-term availability and support extended temperature operation.
Custom design of computer boards and systems
Often the most cost-effective solution results in a custom design – while using as many standard components as possible. Synergy effects emerge through the mutual development of standard and custom boards and systems, completed by the built-to-order approach of MEN’s box PCs and 19"-based application-ready and turnkey systems.
Complete system solutions based on in-house mechanical design
Whether a 19" system, wall-mount, standalone or DIN-rail is needed, we guarantee overall operability of each system, minimizing the integration effort and the handling cost on the customer’s side. The quality of our systems is assured by applying traceability through the V-model.
Customer assistance in configuration of mission-critical systems
Computer architectures with safety-critical requirements are very complex. Considerations include safety- critical characteristics and levels (SIL, DAL), reliability questions, error behavior modes and the major IEC and
EN standards – backed by a professional safety and risk management.
47
MEN is a member of:
» AMD Fusion Partner Program
» BavAIRia
(Cluster for innovative aerospace technology in Bavaria)
» CNA
(Center for Transportation & Logistics Neuer Adler e.V.)
» NXP / QUALCOMM Design Alliance
» Intel® IoT Solutions Alliance
» Open Source Automation Development Lab
(OSADL)
» PCI-SIG
(Peripheral Component Interconnect Special Interest Group)
» PICMG
(PCI Industrial Computer Manufacturers Group
)
» RSSI
(Railway Systems Suppliers, Inc. Trade Association)
» Unife
(Union des Industries Ferroviaires Européennes)
» USB-IF
(Universal Serial Bus Implementers Forum, Inc.)
» VITA
(VMEbus International Trade Association)
» Wind
(Partner Eco System)
» ZVEI
(German Electrical and Electronic Manufacturers Association)
February 2017
Copyright © MEN Mikro Elektronik GmbH
All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement