VolvoBHD13Speed

VolvoBHD13Speed
VHD64FT200
Prepared By:
PAUL BLACKSTON
[email protected]
COLUMBUS TRUCK & EQUIPMENT CENTER,
LLC
Table of Contents
Vehicle Spec..................................................................................................3
Predictor Information....................................................................................14
Top Speed....................................................................................................18
Aero & Fuel Economy..................................................................................19
GAWR..........................................................................................................20
Dimensions..................................................................................................21
TopDimensions............................................................................................22
Turning Circle...............................................................................................23
Additional Product and/or Service Information.............................................24
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 2
Date: Thu Jun 16 2016
Dealer ID: 5464D
Vehicle Spec
BASE MODEL
004645
BASE MODEL
Front
Weight
Rear
Weight
8,939
7,706
VOLVO TRUCKS - ASSEMBLED IN THE USA
0
0
Description
VHD64FT200
Price
MODEL PACKAGE
S 99X76X
MANUFACTURING
LOCATION
VEHICLE ADAPTATION
S 114010
MARKET ADAPTATION
USA / USA TERRITORY MARKET ADAPTATION
0
0
S 38XCNX
OPERATOR'S MANUAL
LANGUAGE
ENGLISH
0
0
S 125001
AREA/DOMICILE
(EXHAUST)
49 STATE + CANADA / NON CALIFORNIA
0
0
S 263009
VEHICLE APPLICATION
TRACTOR / LOW-BOY TRAILER
0
0
S DKXG2X
GROSS COMBINATION
WEIGHT
80,000 LB GROSS COMBINATION WEIGHT
0
0
S 2MCA1X
VEHICLE GHG
CERTIFICATION
GREEN HOUSE GAS COMPLETE VEHICLE
CERTIFICATION
0
0
S 3GCB1X
GHG VEHICLE
APPLICATION
GREEN HOUSE GAS VOCATIONAL
APPLICATION
0
0
S 898003
VEHICLE WARRANTY
QUALIFICATION
STANDARD HEAVY DUTY WARRANTY
QUALIFIED
0
0
S 259003
VEHICLE VOCATION
CONSTRUCTION SERVICE
0
0
S 260006
OPERATING CONDITIONS
ON HIGHWAY, STARTING GRADES<16%
0
0
S 264001
LOADING SURFACE
FACTOR
CONCRETE LOADING AND / OR UNLOADING
SURFACE
0
0
S DHX20X
OPERATING CLASS
OPERATING CLASS TWO (ON/OFF HIGHWAY)
0
0
S FHXL1X
VEHICLE WIDTH
102" (2590 MM) VEHICLE WIDTH
0
0
O 938002
CUSTOMER FLEET SIZE
REGIONAL FLEET 25 OR MORE VEHICLES IN
OWN FLEET OF ANY VEHICLE BRAND
0
0
25
20
PASSIVE AND ACTIVE SAFETY
O 2CXD3X
CAB TYPE
HIGH-STRENGTH STEEL (HSS) DAY CAB WITH B
-PILLAR MOUNTED EXHAUST
S 2WXA1X
STEERING WHEEL
VOLVO SAFETY 18" SPORT STEERING WHEEL
AND ADJUSTABLE STEERING COLUMN
0
0
S DUXA1X
SRS AIR BAG
VOLVO SRS AIR BAG-DRIVER SIDE ONLY
0
0
S D8XC1X
SAFETY BELT REMINDER
SAFETY BELT INDICATOR AND AUDIBLE
REMINDER
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 3
Date: Thu Jun 16 2016
Dealer ID: 5464D
S 43X40X
AUXILIARY DOWN VIEW
MIRROR
S WRXA1X
DOWN VIEW MIRROR OVER PASSENGER DOOR
0
0
ANTILOCK BRAKE SYSTEM BENDIX ABS
MANUFACTURER
0
0
O 932005
DRIVETRAIN CONCEPT
VOLVO DUAL TORQUE
0
0
O 1017T4
ENGINE PACKAGE
VOLVO D13-455 HP 1800RPM 1550-1750 LB-FT
DUAL-TORQUE - EPA'14 EMISSION LEVEL
390
0
ENGINE
ENGINE EQUIPMENT
S KWXA1X
AIR CLEANER
SINGLE STAGE AIR CLEANER
0
0
S JWXD1X
AIR INTAKE
HOOD MOUNTED AIR INTAKE
0
0
O H9XK1X
RADIATOR
1240 SQ IN, 2 ROW CORE RADIATOR
18
0
S K9X09X
COOLANT
EXTENDED LIFE ANTIFREEZE -34 F (-37 C)
0
0
S C4XA2X
COOLANT
MANUFACTURER
CHEVRON TEXACO
0
0
S 208025
FAN CLUTCH PACKAGE
ELECTRONIC VISCOUS FAN CLUTCH
0
0
S NCXA5X
STARTER
DELCO REMY 12V 39MTHD STARTER
0
0
S PJXMGX
ALTERNATOR
135 AMP DELCO REMY 35SI PAD MOUNT
ALTERNATOR (12V)
0
0
S 810111
BATTERY PACKAGE
2 VOLVO 1000 CCA MAINTENANCE FREE 12V
BATTERIES, 2000 CCA
0
0
S L4X16X
BATTERY BOX MOUNTING
BATTERY BOX, LEFT HAND SIDE, BEHIND
FRONT FENDER
0
0
S NQXB1X
BATTERY BOX
CONFIGURATION
BATTERY BOX - 3 CAPACITY
0
0
S L5XA1X
BATTERY BOX COVER
BASIC BATTERY BOX COVER
0
0
S NFXA0X
BATTERY DISCONNECT
SWITCH
MANUAL BATTERY DISCONNECT MAIN SWITCH
0
0
S 428001
DIESEL EXHAUST FLUID
TANK
18.5 GALLON LH 26", FRAME MOUNTED (168
LBS OF DEF WHEN FILLED TO MAXIMUM
LEVEL) INCLUDED IN BASE MODEL WEIGHT
0
0
O 230029
EXHAUST SYSTEM
COMPACT DPF MOUNTED RIGHT HAND SIDE
UNDER CAB, FRAME MOUNTED SCR, WITH CAB
MOUNTED VERTICAL PIPE
0
0
O 232088
EXHAUST OUTLET
PACKAGE
10' 0" ALUMINIZED STAINLESS STEEL SINGLE
STACK
0
0
S K0XD1X
EXHAUST FEATURES
TURNED OUT EXHAUST EXTENSION
0
0
S DVXC3X
LOWER EXHAUST PIPING
ALUMINIZED STAINLESS STEEL EXHAUST PIPE
0
0
S CUXB1X
EXHAUST PIPING FLEX
SECTION
STAINLESS STEEL EXHAUST FLEX SECTION
0
0
S KNXC1X
EXHAUST SHIELD
ALUMINUM EXHAUST SHIELD
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 4
Date: Thu Jun 16 2016
Dealer ID: 5464D
S JVXH1X
PRIMARY FUEL FILTER
VOLVO DUAL ENGINE MOUNTED FUEL FILTERS
WITH WATER SEPARATOR
0
0
S MBXA1X
PRIMARY FUEL FILTER
LOCATION
STANDARD FUEL FILTER LOCATION
0
0
S VWXCAX COMPRESSOR
WABCO 31.8 CFM COMPRESSOR
0
0
S 2GBAZX
CLUTCHABLE AIR
COMPRESSOR
NO CLUTCHABLE AIR COMPRESSOR PROVIDED
0
0
O 5NXAVX
ENGINE BLOCK HEATER
PHILLIPS 120V 1000W LEFT HAND RECEPTACLE
BLOCK HEATER
5
0
O EFXASX
ENGINE OIL PAN HEATER
120 VOLT, 150 WATT OIL PAN HEATER
5
0
O HTXA8X
ENGINE BRAKE
VOLVO ENGINE BRAKE (I-VEB)
0
0
S QHXC1X
ENGINE OIL PAN
STAMPED STEEL OIL PAN (STANDARD OIL
CHANGE INTERVALS)
0
0
89
30
TRANSMISSION
O 270744
TRANSMISSION PACKAGE
EATON FULLER RTLO-18913A, 13 SPEED
O RVXA1X
GEAR SHIFT LEVER
FIXED GEAR SHIFT LEVER
0
0
S 7RXB1X
TRANSMISSION
LUBRICANT
SYNTHETIC TRANSMISSION LUBRICANT
0
0
O T2XC3X
TRANSMISSION COOLER
WATER TO OIL TRANS COOLER IN RADIATOR
0
0
S THXC2X
DRIVELINE
MANUFACTURER
SPICER LIFE DRIVELINE WITH GREASEABLE XL
U-JOINTS
0
0
S TKXA1X
DRIVELINE
CALCULATED TO TORQUE REQUIREMENTS
0
0
O 250091
CLUTCH
EATON 15.5" 2 PLATE CERAMETALLIC SOLO
ADVANTAGE 9-SPRING, 4 PAD - 1760 LB-FT
CAPACITY
0
0
O RBXA1X
CLUTCH FEATURES
LUBE LINE BETWEEN RELEASE BEARING AND
BELL HOUSING
0
0
PROGRAMMABLE FEATURES
S 9KAB1X
IDLE EMISSION
CERTIFICATION
IDLE EMISSION CERTIFICATION, CARB 08
0
0
S Y7BB1X
IDLE EMISSION LABEL
LOCATION
CAB MOUNTED CARB '08 DECAL LOCATION
0
0
S 78AC5X
EMISSION ON BOARD DIAG EMISSION ON BOARD DIAGNOSTIC, DISPLAY
CONTROL
ONLY, USA 2016
0
0
S A3AAAX
ENGINE IDLE AUTOMATIC
SHUTDOWN (AL)
ENGINE IDLE SHUTDOWN, ENABLE
0
0
S E0XFLX
ENGINE IDLE SHUTDOWN
TIME (AM)
IDLE SHUTDOWN TIME 5 MINUTES
0
0
S K7XA1X
ENGINE IDLE CONTROL
(CMQ)
BASIC ENGINE IDLE CONTROL
0
0
S D3AAEX
AMBIENT TEMP MAX
THRESHOLD (CMO)
MAX AMBIENT AIR TEMP OVER-RIDE, 80 DEG F
(27 DEG C)
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 5
Date: Thu Jun 16 2016
Dealer ID: 5464D
S D2AACX
AMBIENT TEMP MIN
THRESHOLD (CMN)
MIN AMBIENT AIR TEMP OVER-RIDE, 45 DEG F
(7 DEG C)
0
0
S JDXD1X
CRUISE CONTROL (AG)
WITH ECO CRUISE CONTROL
0
0
S JFXLLX
CRUISE CONTROL, MAX
SPEED (AI)
MAXIMUM CRUISE, 65 MPH (105 KM/H)
0
0
S Y3CC5X
PEDAL ROAD SPEED LIMIT PEDAL ROAD SPEED LIMIT, 65 MPH (105 KM/H)
SETTING (P1I16)
0
0
S JCXE6X
ROAD SPEED LIMIT
SETTING (P1AOC)
ROAD SPEED LIMIT, 65 MPH (105 KM/H)
0
0
S U4AA1X
GEAR DOWN VEHICLE
SPEED LIMITER (P1AL0)
GEAR DOWN VEHICLE SPEED LIMITER
ENABLED
0
0
S U5AK3X
GEAR DOWN VEHICLE
SPEED LIMIT (P1AOD)
GEAR DOWN VEHICLE SPEED, 58 MPH (93
KM/H)
0
0
S E3AAEX
CRUISE CONTROL MIN
SPEED (BK)
MIN CRUISE, 30 MPH (48 KM/H)
0
0
S X2BA1X
ROAD SPEED LIMIT
CONTROL TYPE (P1I01)
WITH ECO RSL CONTROL
0
0
S 0NAA1X
OPTIMIZED FUEL ECON
INDICATOR (P1LXM)
OPTIMIZED FUEL ECONOMY INDICATOR,
SWEET SPOT
0
0
S X1BA1X
ENGINE LOAD IN PTO
(CMM)
30% MINIMUM ENGINE LOAD LIMIT IN PTO
BEFORE ALLOW IDLE SHUTDOWN
0
0
S W5BE1X
MAXIMUM ENGINE SPEED
AT 0 MPH (P1ANA)
1400 MAXIMUM ENGINE RPM AT 0 MPH
0
0
S K5XA2X
ENGINE PROTECTION
SYSTEM (P1FQT)
ENGINE PROTECTION (SHUTDOWN)
0
0
S X4BA1X
COOLANT WARM HOLD
TEMP (KBS)
COOLANT WARM HOLD TEMP ENABLED
0
0
S 94AA1X
FAULT CODE DISPLAY
FILTER
FAULT CODE DISPLAY FILTER
0
0
S 0RAD1X
DPF REGENERATION
CONTROLS
DPF REGEN CONTROL, AUTO REGEN IN
MOTION, MANUAL PARKED REGEN,
MANUAL INHIBIT
0
0
S EXXGSX
PTO MAX ENGINE SET
SPEED (AND)
PTO ENGINE MAXIMUM 700 RPM
0
0
S EYXGSX
PTO RESUME ENGINE SET PTO ENGINE RESUME 700 RPM
SPEED (ANE)
0
0
FRONT AXLE
S 370403
FRONT AXLE PACKAGE
VOLVO VF14 14,600 LB FRONT SPRINGS
0
0
S 7OBC1X
BRAKE REGULATION
BRAKE REGULATION, STOPPING DISTANCE 250
FT (76M)
0
0
S 782002
FRONT BRAKE PACKAGE
FRONT BRAKE BENDIX SPICER, CAST S-CAM,
STANDARD LUBE
0
0
S U5XB1X
FRONT BRAKE DIMENSION 16.5X6 FRONT BRAKE SIZE
15
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 6
Date: Thu Jun 16 2016
Dealer ID: 5464D
S U3XA1X
BRAKE DRUM, FRONT
AXLE
CAST IRON FRONT BRAKE DRUM
OUTBOARD MOUNTED
0
0
S LQXAIX
FRONT BRAKE LINING
MATERIAL
BRAKE LINING MATERIAL FRONT, BENDIX
SPICER BX380
0
0
S UDXA1X
FRONT AXLE BRAKE DUST FRONT BRAKE DUST SHIELDS
SHIELD
0
0
S 0KXI5X
HUBS, FRONT AXLE
IRON PRESET PLUS FRONT AXLE HUB WITH
INTEGRATED SPINDLE NUT
0
0
S ZGXE1X
FRONT OIL SEAL CAP
STEMCO VISIBLE CAP WITH DRAIN
0
0
S 7VXB1X
FRONT AXLE LUBRICANT
SYNTHETIC FRONT AXLE LUBRICANT
0
0
S XAXBFX
POWER STEERING GEAR
TRW THP60 INTEGRAL POWER STEERING
GEAR
0
0
S 371071
FRONT SUSPENSION
PACKAGE
PARABOLIC LEAF FRONT SUSPENSION
0
0
S IRXA1X
SPRING MAINTENANCE
TYPE
LUBRICATED SPRING PINS AND BUSHINGS
0
0
REAR AXLE
S 330684
REAR AXLE PACKAGE
MERITOR MT-40-14X4D HYPOID (HEAVY DUTY
HOUSING) 40,000 LB CAPACITY
0
0
O TAXD7X
REAR AXLE RATIO
3.25 REAR AXLE RATIO
0
0
O TUXA1X
DIFFERENTIAL LOCK
FULL LOCKING WHEEL DIFFERENTIAL
0
63
O 350324
REAR SUSPENSION
PACKAGE
40,000 LB HENDRICKSON HAS AIR SUSPENSION
54" SPACING
0
32
S YVXA1X
REAR SHOCK ABSORBER
REAR SHOCK ABSORBERS
0
0
S 783002
REAR BRAKE PACKAGE
REAR BRAKE BENDIX SPICER, CAST S-CAM,
STANDARD LUBE
0
0
S U8XA1X
DRIVE AXLE BRAKE
DIMENSION
16.5X7 REAR BRAKE SIZE
0
0
S U4XA1X
BRAKE DRUM, DRIVE AXLE CAST IRON DRIVE AXLE BRAKE DRUM
OUTBOARD MOUNTED
0
0
S UEXA1X
DRIVE AXLE BRAKE DUST
SHIELD
0
0
S MAXACX
DRIVE AXLE BRAKE LINING BRAKE LINING MATERIAL DRIVE, BENDIX
MATERIAL
SPICER BX415
0
0
S 0LXI5X
HUBS, DRIVE AXLE
IRON PRESET PLUS DRIVE AXLE HUB WITH
INTEGRATED SPINDLE NUT
0
0
S 7WXADX
REAR AXLE LUBRICANT
CHEVRON DELO GEAR LUBRICANT ESI SAE
80W-90 (APPROVED FOR MERITOR EXTENDED
COMPONENT WARRANTY ONLY)
0
0
S 781056
PARKING BRAKE
CHAMBER PACKAGE
FOUR CAM TYPE HALDEX
0
0
S V1AB1X
REAR BRAKE CHAMBER
SIZE
REAR BRAKE CHAMBER 30 / 30 SQ INCHES
(SERVICE / EMERGENCY)
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
REAR BRAKE DUST SHIELDS
Page: 7
Date: Thu Jun 16 2016
Dealer ID: 5464D
S UKXA1X
CHAMBER STROKE
LENGTH, DRIVE AXLE
BASIC LENGTH BRAKE CHAMBER STROKE
0
0
O 784013
FRONT AND REAR SLACK
ADJUSTERS
MERITOR BRAKE ADJUSTER FRONT AND REAR
0
0
S O5BD1X
FRONT BRAKE CHAMBER
SIZE
FRONT BRAKE CHAMBER 24 SQUARE INCHES
(SERVICE)
0
0
CHASSIS
S 3XB3AX
DRIVER SIDE FRONT
LEFT HAND BATTERY BOX - 3 CAPACITY, DEF
CHASSIS CONFIGURATION TANK MOUNTED BEHIND BATTERY BOX (VHDF)
0
0
S 3YBDAX
PASSENGER SIDE FRONT FRAME MOUNTED SCR (VNM/VNL/VHD)
CHASSIS CONFIGURATION
0
0
O 400193
WHEELBASE
193" WHEELBASE
117
-85
S 402055
OVERHANG
55" OVERHANG
0
0
S KBXB1X
FUEL TANK SHAPE DIESEL
26" DIA CYLINDRICAL FUEL TANK
0
0
O J8XEWX
FUEL TANK, LEFT HAND
SIDE - DIESEL
100 GALLON LEFT HAND FUEL TANK
4
4
S J9XK1X
FUEL TANK, RIGHT HAND
SIDE - DIESEL
NO RIGHT HAND DIESEL TANK PROVIDED
0
0
S KEXA1X
FUEL TANK MATERIAL DIESEL
ALUMINUM FUEL TANK MATERIAL
0
0
S HBXB1X
FUEL TANK POSITION
FUEL TANK POSITION 1
0
0
S 8NAA1X
DPF COVER
DPF COVER, PAINTED STEEL
0
0
S U6BA1X
DIESEL EXHAUST FLUID
TANK COVER
PAINTED DIESEL EXHAUST FLUID TANK COVER
0
0
S JHXA1X
FUEL LINES
NYLON FUEL LINES
0
0
S KHXA1X
FUEL TANK STRAPS
PAINTED STEEL FUEL TANK STRAPS
0
0
S KFXA1X
FUEL TANK CAP / DEF
TANK CAP
NON-LOCKING FUEL TANK CAP
0
0
S 8HAA1X
AIR TANK ARRANGEMENT
AIR TANK ARRANGEMENT, BASIC
0
0
S U2XB1X
AIR TANKS
STEEL AIR TANKS
0
0
S VHXD7X
AIR DRYER
MERITOR WABCO AIR DRYER, 1200UP
WITHOUT TURBO CUT OFF VALVE, WITH
HEATER AND COALESCING OIL FILTER
0
0
S UWXB1X
AIR TANK DRAIN VALVE
MANUAL PULL CORD ON BRAKE SYSTEM
TANKS
0
0
S 403005
FRAME RAIL PACKAGE
11.81"X3.54"X.31" STRAIGHT STEEL RAILS
0
0
S X4X99X
FRONT FRAME EXTENSION NO FRONT FRAME EXTENSION PROVIDED
0
0
S 8EXB1X
INTERMEDIATE
STEEL CROSSMEMBER MATERIAL
CROSSMEMBER MATERIAL
0
0
S OAXA1X
INTERMEDIATE
CROSSMEMBER
CONFIGURATION
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
BASIC INTERMEDIATE CROSSMEMBER
Page: 8
Date: Thu Jun 16 2016
Dealer ID: 5464D
S X8XB1X
FORWARD REAR SUSP
STEEL CROSSMEMBER MATERIAL
CROSSMEMBER MATERIAL
0
0
S ZIXA1X
BOGIE CROSSMEMBER
MATERIAL
0
0
S X6XB1X
REAR FRAME TREATMENT TAPERED REAR CROSSMEMBER, 27 DEGREE
0
0
S 4DXE3X
FRONT BUMPER
STEEL CONSTRUCTION BUMPER-THREE PIECE
0
0
S FRXA1X
BUMPER POSITION
BUMPER MOUNTED STANDARD POSITION
0
0
S 65XB1X
FRONT FENDER
EXTENSION
NO FRONT FENDER EXTENSION PROVIDED
0
0
S 4EXB1X
FRONT TOWING DEVICE
TWO FRONT TOWING DEVICES
0
0
S Q8CB1X
MAIN CHASSIS WIRING
HARNESS COVERING
BASIC MAIN CHASSIS WIRING HARNESS
COVERING
0
0
S U7CFCX
LH FUEL TANK FACE
LOCATION
LH FUEL TANK FRONT FACE @ XM=4325
0
0
STEEL CROSSMEMBER MATERIAL
TRANSPORT ADAPTATION
S 490314
FIFTH WHEEL PACKAGE
JOST AIR SLIDE LEFT HAND RELEASE
0
0
S 488505
FIFTH WHEEL HEIGHT
50.5" FIFTH WHEEL HEIGHT
0
0
S 6JXA1X
SLIDING FIFTH WHEEL
TRAVEL
12.0 INCHES OF FIFTH WHEEL TRAVEL
0
0
S 6BX54X
FIFTH WHEEL REARMOST
LOCATION
27" BEHIND FWD AXLE CENTER (-685MM)
0
0
S LIXA1X
FIFTH WHEEL ANGLE
MATERIAL
STEEL FIFTH WHEEL ANGLES
0
0
S 51XA1X
HOSEHANGERS
DUMMY GLADHANDS AND CABLE STORAGE
BRACKET LEFT HAND BACK OF CAB
REACHABLE FROM GROUND
0
0
S WHXD1X TRAILER BRAKE
CONNECTION POSITION
CAB MOUNTED TRAILER BRAKE CONNECTION
0
0
S WKX99X
HOSE TENDER POSITION
NO HOSE TENDER POSITION PROVIDED
0
0
S 52XA1X
TRAILER ELECTRICAL
CABLE
FIXED TRAILER CABLE
0
0
S 5ZXB1X
TRAILER BRAKE HOSES &
CABLES
12' COILED TRAILER BRAKE HOSES AND CABLE
0
0
O WLXA1X
TRAILER BRAKE HAND
CONTROL
FULL PRESSURE TRAILER BRAKE HAND
CONTROL
2
0
S 6WXA1X
CENTER CONSOLE FOR
BODY CONTROLS
MOUNTING PLATE ONLY FOR BODY CONTROLS
0
0
S L3XA1X
BODY BUILDER
ELECTRICAL PREP
ELECTRICAL PREP KIT FOR BODY BUILDER
-1
8
AIR RIDE CAB SUSPENSION WITH LATERAL
DAMPENERS
-11
-2
CAB EXTERIOR
O 2DX30X
CAB SUSPENSION
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 9
Date: Thu Jun 16 2016
Dealer ID: 5464D
S 21XA1X
AUXILIARY REAR WINDOW STANDARD REAR WINDOW
0
0
S D2XA1X
WIPER BLADE
BASIC WIPER BLADE
0
0
S 28XA1X
FRONT GRILLE
BLACK MOLDED FRONT GRILLE
0
0
S H6XA1X
BUG SCREEN
BUG SCREEN BEHIND GRILLE
0
0
S 0EAC1X
AIR INTAKE GRILLE FINISH AIR INTAKE GRILLE, BLACK
0
0
S LZXD1X
AIR HORN
DUAL TRUMPET MOUNTED UNDER CAB
0
0
S 3FX51X
EXTERIOR SIDE VIEW
MIRRORS
BLACK VOCATIONAL MIRRORS WITH LONG
ARMS
0
0
S 4NXB1X
EXTERIOR SUNVISOR
EXTERIOR SUNVISOR WITH CLEAR LENS LED
MARKER LAMPS
0
0
CAB INTERIOR
S 540066
INTERIOR TRIM PACKAGE
CHOICE VINYL WITH ESPRESSO BROWN TRIM
PACKAGE
0
0
S 35XD1X
SEAT MANUFACTURER
NATIONAL SEAT
0
0
S 3YXG8X
DRIVER SEAT TYPE
COMFORT AIR SUSPENSION HIGH BACK
0
0
O 32XG8X
PASSENGER SEAT TYPE
COMFORT AIR SUSPENSION HIGH BACK
27
12
S 542002
DRIVER SEAT
UPHOLSTERY
DRIVER SEAT ESPRESSO BROWN VINYL
0
0
S 543002
PASSENGER SEAT
UPHOLSTERY
PASSENGER SEAT ESPRESSO BROWN VINYL
0
0
O 3PXC1X
SEAT ARMREST
INBOARD DRIVER AND PASS SEAT ARMREST
6
0
S K7AA1X
SAFETY BELT LENGTH
STANDARD SAFETY BELT LENGTH
0
0
S OUXA1X
SAFETY BELT DRIVER
SEAT
SAFETY BELT DRIVER SEAT, BLACK
0
0
S OXXA1X
SAFETY BELT PASSENGER SAFETY BELT PASSENGER SEAT, BLACK
SEAT
0
0
S 4AXB1X
CLIMATE UNIT
INTEGRAL AIR CONDITIONER WITH HEATER MANUAL CONTROLS
0
0
S 41X25X
PARKING HEATER
WITHOUT PARKING HEATER
0
0
S M5XA1X
DOG HOUSE
DOG HOUSE TWO PIECE
0
0
S 4JXD1X
STORAGE OVERHEAD
DRIVER
NETTED OVERHEAD STORAGE
(DRIVER/PASSENGER SIDES) WITH CB
MOUNTING AND AUXILIARY SWITCHES
0
0
S 571015
GAUGE PACKAGE
EIGHT GAUGE INSTRUMENT CLUSTER WITH
BASE DRIVER INFORMATION DISPLAY (DID)
0
0
S Y7CA1X
DIAGNOSTICS DISPLAY IN
CLUSTER
BASIC DIAGNOSTICS DISPLAY IN CLUSTER
0
0
S PVXA2X
AIR RESTRICTION
INDICATOR
GRADUATED ARI ON FILTER
0
0
S N8XD1X
SPEEDOMETER
GRADUATION
MPH SPEEDOMETER GRADUATION
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 10
Date: Thu Jun 16 2016
Dealer ID: 5464D
LIGHTING
O 81AB1X
SPOTTING LAMP
TECHNOLOGY
O N5XA1X
SPOTTING LAMP, LED
0
0
SPOTTING LAMP, BACK OF SINGLE BACK OF CAB SPOTTING LAMP, FLUSH
CAB
MOUNTED
2
1
O NJXZ1X
AUXILIARY LAMPS
NO AUXILIARY LAMPS PROVIDED
0
0
S 836002
HEADLAMPS
HALOGEN HEADLAMPS
0
0
S LSXG1X
DAYTIME RUNNING LAMPS EQUIPPED WITH DAYTIME RUNNING LIGHTS
0
0
S NEXH1X
STOP AND TAIL LIGHTS
DUAL INTEGRATED SUPER 60 LED TAIL LIGHTS
WITH SEPARATE LED BACKUP LIGHT - ALL
LIGHTS MOUNTED IN TAPERED
CROSSMEMBER
0
0
S 3BXB1X
REFLECTORS BACK OF
CAB
WHITE REFLECTORS BACK OF CAB
0
0
S NPXB1X
TURN SIGNAL SWITCH
SELF CANCELLING TURN SIGNAL SWITCH
0
0
AUDIO SYSTEM
S 590013
RADIO PACKAGE
AM / FM / CD / MP3 / BLUETOOTH RADIO
0
0
S 73AJ1X
RADIO ANTENNA
SINGLE RH 48 INCH MIRROR MTD RADIO
ANTENNA
0
0
S LYXC1X
STEERING WHEEL
CONTROLS
MARKER INTERRUPT, HEADLAMP INTERRUPT,
RADIO, PHONE CONTROLS IN STEERING
WHEEL
0
0
S 5CXA1X
RADIO SPEAKERS
SPEAKERS IN DASH ONLY
0
0
O 5JXA1X
CB RADIO MOUNTING
DASH MOUNTED CB HOLD DOWN
0
0
S 5BXB5X
CB ANTENNA
SINGLE LEFT HAND 48 INCH MIRROR MOUNTED
CB ANTENNA
0
0
MISC CAB EQUIPMENT
S 2XX20X
WINDOW LIFT
MANUAL WINDOW LIFT
0
0
S 3AXB1X
DOOR LOCKS CAB
MANUAL CAB DOOR LOCKS
0
0
O 20XB1X
KEY TYPE
KEYED ALIKE OPTION #1
0
0
S 8BXB1X
KEY QUANTITY PER UNIT
4 KEYS PROVIDED PER UNIT
0
0
S N1XA1X
ELECTRICAL DASH
OUTLET
ONE 12 VOLT DASH OUTLET
0
0
O 40XL2X
FIRE EXTINGUISHER
5 POUND ABC DRY TYPE, RECHARGEABLE,
MOUNTED IN CAB
5
2
O 4VX31X
AUXILIARY SAFETY
EQUIPMENT
TRIANGLE REFLECTOR KIT
3
1
TIRES AND WHEELS FRONT
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 11
Date: Thu Jun 16 2016
Dealer ID: 5464D
O 093300
TIRE PACKAGE FRONT
12R22.5H BRIDGESTONE M843 (14780) LBS.
GAWR) ON/OFF ROAD USAGE
-32
0
O 4WCE1X
TIRE CLASSIFICATION
FRONT (CA)
GHG FRONT TIRE CLASSIFICATION, BASIC
0
0
S 084491
RIM/WHEEL PACKAGE
FRONT
22.5X9.00 MAXION STEEL POWDER COAT
WHITE 286BC 5 HAND HOLES HUB PILOTED
0
0
S 907002
FRONT WHEEL AND TIRE
QUANTITY
TWO FRONT WHEELS AND TIRES
0
0
TIRES AND WHEELS REAR
S 094736
TIRE PACKAGE REAR
11R22.5G BRIDGESTONE R268 (23360 LBS.
GAWR) REGIONAL HAUL
0
0
O 4XCC1X
TIRE CLASSIFICATION
REAR (CA)
GHG REAR TIRE CLASSIFICATION, LOW
ROLLING RESISTANCE
0
0
S 085487
RIM/WHEEL PACKAGE
REAR
22.5X8.25 MAXION STEEL POWDER COAT
WHITE 286BC 5 HAND HOLES HUB PILOTED
0
0
S 908008
DRIVE WHEEL AND TIRE
QUANTITY
EIGHT DRIVE WHEELS AND TIRES
0
0
TIRE INFLATION VALVE
TIRE INFLATION VALVE, STANDARD
0
0
S 950800
CAB PAINT SCHEME
SINGLE COLOR PAINT
0
0
S 9801T4
FIRST CAB COLOR
GLACIER WHITE P3029
0
0
S 955040
CAB PAINT TYPE
BC/CC-SOLID
0
0
S 9861U1
CHASSIS COLOR
BLACK P3036
0
0
S 987950
BUMPER COLOR
SAME AS FIRST CAB COLOR
0
0
S 988401
DISC WHEEL OR RIM
COLOR
STEEL DISC WHEELS-PREPAINTED WHITE,
POWDER-COAT,
ALUMINUM OR STYLIZED DISC-UNPAINTED
0
0
S 989949
SPOKE WHEEL / HUB
COLOR
SPOKE WHL/HUB SAME AS CHASSIS-AL UNPTD
0
0
PRE-DELIVERY INSPECTION, BASIC
0
0
MISC TIRE EQUIPMENT
S 15XABX
PAINT
BUSINESS SERVICES
S 9LAA1X
PRE-DELIVERY
INSPECTION
BASE WARRANTY AND PURCHASED COVERAGES
S 899302
WARRANTY TYPE
HEAVY_DUTY_STANDARD_BASE_COVERAGE
12_MONTHS/100,000_MILES
0
0
S 896900
VOLVO D11/D13 ENGINE
EXTENDED COVERAGE
VOLVO D11/D13 BASE ENGINE COVERAGE 24MTHS/250K MILES OR 6250 HRS
0
0
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 12
Date: Thu Jun 16 2016
Dealer ID: 5464D
S 875001
VEHICLE EMISSIONS
US & CANADA VOLVO ENGINE EQUIPPED
COMPONENTS COVERAGE VEHICLE EMISSIONS COMPONENTS
COVERAGE_60 MONTHS/100K_MILES
0
0
O 880009
TRANSMISSION
COVERAGE
EATON FULLER STANDARD DUTY WARRANTY
FOR ALL MANUAL AND AUTOMATED
TRANSMISSIONS, ANY TORQUES, 36
MTHS/UNLIMITED MILES
0
0
S 888900
ADDITIONAL EXTENDED
CHASSIS TOWING
COVERAGE
BASE CHASSIS TOWING COVERAGE, 90
DAY/5000 MILE/8050 KILOMETER
0
0
S 874900
ADDITIONAL EXTENDED
ENGINE TOWING
COVERAGE
BASE VOLVO ENGINE TOWING COVERAGE, 24
MO/250K MILE
0
0
S 866001
REMOTE DIAGNOSTICS
BUNDLE
REMOTE DIAGNOSTICS: INCLUDES ASIST AND
VOLVO ACTION SERVICE - 24 MONTHS
0
0
S 867001
UPTIME CENTER BUNDLE
ASIST AND VOLVO ACTION SERVICE - 24
MONTHS
0
0
FONTAINE MODIFICATION PLANNING
O 949001
OUTSIDE MODIFICATION
FONTAINE MODIFICATION REQUESTED
(DEALER IS RESPONSIBLE FOR CONTACTING
FONTAINE DIRECTLY FOR ANY ADDITIONAL
ITEMS OR MODIFICATIONS)
0
0
O 611002
FONTAINE REAR FENDER
PLANNING CODE
FONTAINE INSTALLED FULL REAR FENDERS
(DEALER IS RESPONSIBLE FOR ANY
ADDITIONAL INVOICING FROM FONTAINE)
0
0
O 864009
FONTAINE MODIFICATION
PLANNING CODE
FONTAINE TIME PLANNING CODE - 9 HRS (4
DAY TURNAROUND)
0
0
DEALER OPTIONS
D 1
DEALER OPTION
WET LINE SYSTEM
0
0
D 2
DEALER OPTION
FULL RADIUS REMOVABLE FENDERS
0
0
8,939
7,706
664
86
0
0
9,603
7,792
SUB TOTALS
BASE WEIGHT
FACTORY OPTION WEIGHT
DEALER OPTION WEIGHT
TOTALS
TOTAL WEIGHT(LB)
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 13
17,395
Date: Thu Jun 16 2016
Dealer ID: 5464D
Predictor Information
INPUTS REQUIRED
VALUE
Vehicle Type
FlatHood-NoAeroAids
Desired Cruise Speed
70.0
Desired Road Speed Limit (RSL)
75.0
Performance Level
PL2
Frontal Area (ftsq)
68.0
HP/Accessory Loss
11.0
Model
VHD64FT200
Gross Combination Weight
80,000 LB GROSS COMBINATION WEIGHT
Vehicle Application
ON HIGHWAY, STARTING GRADES<16%
Body/Trailer Type
TRACTOR / LOW-BOY TRAILER
Loading/Unloading Surface Type
CONCRETE LOADING AND / OR UNLOADING SURFACE
Engine
VOLVO D13-455 HP 1800RPM 1550-1750 LB-FT DUAL-TORQUE - EPA'14 EMISSION LEVEL
Peak Power
456 HP @ 1400 - 1700 RPM
Peak Torque
1735 lb-ft @ 1050
Transmission
EATON FULLER RTLO-18913A, 13 SPEED
Rear Axle
MERITOR MT-40-14X4D HYPOID (HEAVY DUTY HOUSING) 40,000 LB CAPACITY
Rear Axle Ratio
3.25
Rear Tire
11R22.5G BRIDGESTONE R268 (23360 LBS. GAWR) REGIONAL HAUL
Tire RPM
500
Total Reduction
2.37
VEHICLE SPECIFICATION SUMMARY
CALCULATED PERFORMANCE SUMMARY
MPH
RPM
Engine RPM @ 65 MPH
65.0
1285
DESIRED/RECOMMENDED VALUE
STATUS
Engine RPM @ Desired Cruise Speed
70.0
Engine RPM @ Road Speed Limit (RSL)
75.0
1383
1200 - 1500 RPM
OK
1482
< 1800
Sweet Spot Cruise Speed Range in Top Gear
60.7 - 75.9
1200 - 1500
OK
Top Gear Speed Range
75.0
OK
30.3 - 91.0
1000 - 1800
Minimum Practical Speed in Reverse
1.7
600
Maximum Practical Speed in Reverse
5.0
1800
Minimum Practical Speed in Lowest Forward Gear
1.8
600
Maximum Practical Speed in Lowest Forward Gear
5.4
1800
Concrete / Asphalt
Wheel HP Required at (70.0 MPH) Cruise Speed
303.2 / 309.9 HP
Wheel HP Required at (75.0 MPH) Road Speed
Limit
346.5 / 354.2 HP
Wheel HP Required at (91.0 MPH) Top Speed
515.7 / 527.0 HP
Gradeability
Recommended Min. Gradeability in Top
Gear
Maximum in Top Gear (Concrete)
1.6%
1.3
OK
Maximum in Top Gear (Asphalt)
1.5%
1.3
OK
Startability
In Lowest Gear
Recommended Min. Startability
24.5%
16.0
Loading/Unloading Surface Type
CONCRETE LOADING AND / OR
UNLOADING SURFACE
Speed on a 1.5% Grade (Concrete)
58.2 MPH
47 - 53 MPH
@1150 RPM in 13th gear
PL2
OK
Recommended Speed on 1.5% Grade
Suggested Value for Gear Down Vehicle Speed
RSL - 10
Driveability Rating
STATUS
100% Max Power available after shift
OK
Very Good
95% Very Good >90% Acceptable
Performance Level
Recommended Speed on 1.5% Grade
Min Gradeability in Top Gear
> 67 MPH
1.9%
PL4 - Performance
61 - 67 MPH
1.7%
PL3 - Economy
54 - 60 MPH
1.5%
PL2 - Fleet / Construction
47 - 53 MPH
1.3%
PL1 - Heavy Haul
40 - 46 MPH
1.1%
PL5 - High Performance
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 14
Date: Thu Jun 16 2016
Dealer ID: 5464D
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 15
Date: Thu Jun 16 2016
Dealer ID: 5464D
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 16
Date: Thu Jun 16 2016
Dealer ID: 5464D
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 17
Date: Thu Jun 16 2016
Dealer ID: 5464D
Top Speed
RPM at 75 MPH
RPM at Cruise Speed
Minimum Of Engine Range
Minimum Of Economy Range
Cruise Speed
Maximum Of Economy Range
Road Speed Limit
Maximum Of Engine Range
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
MPH
30.3
60.7
70.0
75.9
75.0
91.0
Page: 18
RPM
1000
1200
1383
1500
1482
1800
Date: Thu Jun 16 2016
Dealer ID: 5464D
SUBCATEGORY
Front Bumper
Chassis Fairing
Cab Side Fairing
Cab Roof Fairing
Bug Deflector
Tire Package Front
SALES
CODE
4DXE3X
4TXZ1X
4SXZ1X
4RXZ1X
24XZ1X
N6BLCX
Tire Package Rear
N7BGPX
Fan Clutch Package
208025
NONE
SMALL
AERO AND FUEL ECONOMY SUMMARY
DESCRIPTION
LIST PRICE
STEEL CONSTRUCTION BUMPER-THREE PIECE
NO CHASSIS FAIRING PROVIDED
NO CAB SIDE AERO DEVICE PROVIDED
NO ROOF AERODYNAMIC DEVICE PROVIDED
NO BUG DEFLECTOR PROVIDED
M843, FRONT TIRE TREAD, BRIDGESTONE, ON / OFF ROAD
USAGE
R268 ECOPIA, DRIVE TIRE TREAD, BRIDGESTONE,
REGIONAL HAUL
ELECTRONIC VISCOUS FAN CLUTCH
Key - Aero Advantage Rating
GOOD
0
0
0
0
0
0
RATING
++
0
0
MAX
++
Fuel Economy Facts
Good vehicle aerodynamics is ESSENTIAL to achieving excellent fuel economy! It is also important to understand that the fuel savings achieved
with the addition of each aerodynamic device is not cumulative. The more aerodynamic features on the truck, the less each contributes as a
percentage of the overall savings. Many other factors also affect a truck's fuel efficiency; including tire tread depth, engine rating, rear axle gearing,
idle time, speed, weather conditions, driver habits and more.
Aerodynamic Bumper - Volvo's aerodynamic bumper is designed to provide optimal airflow under the vehicle. An optional extension can be
added to prevent airflow from hitting obstructions under the vehicle.
Partial and Extended Chassis Fairings - Partial chassis fairings can improve fuel economy between 2% and 3%. Full fairings offer some
additional improvement, but are often specified because of their aesthetically pleasing appearance.
Cab Side Deflectors and Extenders - Volvo cab side deflectors have a complex, flared contour, unlike the flat deflectors used by competitors.
This unique shape minimized drag and optimizes performance, particularly in crosswind situations. Optional extenders can be added to further
reduce turbulence between the cab and trailer. The use of both roof and side extensions can contribute up to a 2% fuel economy improvement.
Roof Fairing and Extensions - Volvo's roof fairing reduces drag between the cab and the trailer. If the customer still prefers a longer trailer gap,
roof fairing extension (along with side extensions) allow a customer to fine tune the truck to the trailer they are pulling. Volvo's patented design
provides an approximate 1% to 1.5% increase in fuel economy.
Trailer Gap - Minimize the wheel base and trailer gap. The length of the trailer gap plays a significant role in aerodynamic drag. Never select a
gap based on competitive specs. For best fuel economy, always spec the shortest trailer gap possible to accommodate the specific application
while still providing adequate swing clearance.
Avoid Add-on Devices - Devices such as bug deflectors and other "cosmetic" features disrupt airflow across the entire truck. Bug deflectors, for
example, can reduce fuel economy by as much as 2%.
Tires - Tire brand, tread pattern and compound selection can significantly impact fuel economy due to differences in tire rolling resistance.
However, when selecting a tire other factors must also be considered; including cost, traction, wear characteristics and load capacity.
Fan Drive - Under normal circumstances a cooling fan is unloaded most of the time. Since on/off type fan drives consume less power when
unloaded than viscous drives, an on/off type fan drive is recommended for maximum fuel economy.
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 19
Date: Thu Jun 16 2016
Dealer ID: 5464D
SUB-CATEGORY
Front Axle
Front Suspension
Front Tires
SALES
CODE
370403
371071
093300
Front Wheels
084491
Rear Axle
330684
Rear Suspension
Rear Tires
350324
094736
Rear Wheels
085487
GAWR
SALES CODE DESCRIPTION
VOLVO VF14 14,600 LB FRONT SPRINGS
PARABOLIC LEAF FRONT SUSPENSION
12R22.5H BRIDGESTONE M843 (14780) LBS. GAWR) ON/OFF
ROAD USAGE
22.5X9.00 MAXION STEEL POWDER COAT WHITE 286BC 5 HAND
HOLES HUB PILOTED
FRONT GAWR (LBS)
MERITOR MT-40-14X4D HYPOID (HEAVY DUTY HOUSING) 40,000
LB CAPACITY
40,000 LB HENDRICKSON HAS AIR SUSPENSION 54" SPACING
11R22.5G BRIDGESTONE R268 (23360 LBS. GAWR) REGIONAL
HAUL
22.5X8.25 MAXION STEEL POWDER COAT WHITE 286BC 5 HAND
HOLES HUB PILOTED
REAR GAWR (LBS)
TRACTOR GVWR (LBS)
(LBS).
14600
14600
14780
at 120 PSI
20000
at 130 PSI
14600
40000
40000
46720
at 105 PSI
59200
at 120 PSI
40000
54600
Actual GVWR may differ than GVWR value shown based on factory brake ratings and/or lift axles. Please verify that all Federal
Bridge and/or State regulations for lift-axle equipped vehicles have been taken into consideration when final vehicle certification is
provided by body builder.
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 20
Date: Thu Jun 16 2016
Dealer ID: 5464D
DIMENSIONS
DESCRIPTION
Front Frame Extension(in)
Bumper to Front Axle(in)
Wheelbase(in)
Overhang(in)
Overall Length(in)
Bumper to Back of Cab(in)
Eff. Bumber to Back of Cab(in)
Eff. Cab to Rear Axle(in)
Eff. Front Axle to Back of Cab(in)
Eff. Cab to End of Frame(in)
Unladen 5th Wheel Height(in)
Unladen Frame Height(in)
Cab Height(in)
Overall Height(in)
Driver CG(in)
Bogie Spread(in)
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
DWG REF
FE
BA
WB
OH
OL
BBC
EBBC
ECA
EAC
ECEF
5W
FH
CH
OVH
DCG
BS
Page: 21
LENGTH (in)
0.0
29.1
193.0
55.0
277.1
113.6
113.6
108.5
84.5
163.5
50.5
42.2
74.3
116.5
64.5
54.0
Date: Thu Jun 16 2016
Dealer ID: 5464D
DIMENSIONS - TOP VIEW
DESCRIPTION
SALES
CODE
193" WHEELBASE
400193
LEFT HAND BATTERY BOX - 3 CAPACITY, DEF TANK
3XB3AX
MOUNTED BEHIND BATTERY BOX (VHDF)
FRAME MOUNTED SCR (VNM/VNL/VHD)
3YBDAX
FRAME SPACE, FRONT OF FUEL TANK
N/A
100 GALLON LEFT HAND FUEL TANK
J8XEWX
NO RIGHT HAND DIESEL TANK PROVIDED
J9XK1X
FRAME SPACE, REAR OF FUEL TANK
N/A
40,000 LB HENDRICKSON HAS AIR SUSPENSION 54"
350324
SPACING
54" BOGIE SPREAD (1370MM)
GWXDGX
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
Page: 22
DWG REF
WB
DSCC
DRIVER
PASSENGER
SIDE (in)
SIDE (in)
193.0
193.0
75.0
0.0
PSCC
FSF
FTL
FTL
FSR
RSB
0.0
1.6
46.0
0.0
15.4
28.0
108.7
0.0
0.0
0.0
29.3
28.0
HBS
27.0
27.0
Date: Thu Jun 16 2016
Dealer ID: 5464D
TURNING CIRCLE
Turning Radius(rt) A
Curb-to-Curb Diameter(rt) B
Wall-to-Wall Diameter(rt) C
Price Level: Apr 04, 2016 H
Deal: VHD Tractor
27.86
57.83
58.45
Page: 23
Date: Thu Jun 16 2016
Dealer ID: 5464D
896900
Volvo D11/D13 Base Engine Coverage- 24 Months/250K Miles or
6250 Hours
Affects:
Related:
Updated:
VN, VHD
April 5, 2016
Note: PDF files are not official documents and serve only as reference items.
STANDARD ENGINE WARRANTY COVERAGE CERTIFICATE
(EPA 2014)
STANDARD ENGINE WARRANTY COVERAGE CERTIFICATE
(EPA 2017)
Page 1 of 8
© 2016 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
STANDARD ENGINE
WARRANTY CERTIFICATE (EPA2010 and Newer)
Volvo Group North America LLC, d/b/a Volvo Trucks North America, warrants certain individual components of each new Volvo D11,
D13 and D16 EPA 2010 and newer emission engine in a new Volvo truck to be free from defects in material and workmanship under
normal use and service up to the periods specified, provided all Volvo Trucks North America maintenance and inspection requirements
are followed. See your local authorized Volvo Trucks dealer for recommended maintenance and inspection procedures. All warranty
periods are calculated from the date in service of the vehicle. All coverage is 100% for parts and labor subject to the qualifications,
limitations and exclusions as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE FOLLOWING PAGES OF THIS CERTIFICATE.
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to only new Volvo D11, D13, and D16 engines meeting EPA 2010 and newer emission requirements in new Volvo
trucks operated in the United States and Canada and placed in service on or after January 1, 2010. Volvo Trucks North America
reserves the right to make the same changes in design, or make additions to or upon its products, without incurring any obligations to
make the same changes on engines previously built.
Standard Volvo Engine Components Coverage: 24 months or 250,000 miles (402,000 kilometers), whichever occurs first, unless
otherwise noted.
Major Components Coverage: 60 months or 500,000 miles (805,000 kilometers), whichever occurs first.
USE OF IMPROPER OR UNAPPROVED FUEL OR ENGINE OIL WILL VOID THE ENGINE AND AFTER TREATMENT SYSTEM
(DIESEL PARTICULATE FILTER) WARRANTIES. 2010 EPA EMISSION ENGINES REQUIRE THE USE OF EO-O PREMIUM PLUS
(OR VDS-4) SPECIFICATION HIGH PERFORMANCE DIESEL ENGINE OIL AND ULTRA LOW SULFUR DIESEL (ULSD) FUEL.
USE OF FLUIDS OTHER THAN API CERTIFIED DIESEL EXHAUST FLUID (DEF) WILL COMPROMISE AFTERTREATMENT
SYSTEM PERFORMANCE, INCREASE EMISSIONS, AND MAY IMPACT THIS TRUCKS PRODUCT WARRANTIES.
SEE FOLLOWING TABLE FOR SPECIFIC COVERAGES:
Covered Standard Components List:
24 Months or 250,000 miles
Qualifications and Limitations
Air Compressor
Air Compressor Sprocket
Bearings
Camshaft, Caps and Bolts
All internal lubricated bearings and bushings only.
Failures resulting from the valve and injector adjustments not being
maintained properly are NOT covered. Normal maintenance adjustments are
NOT covered.
Connecting Rods, Caps, and Bolts
Coolant Duct Cover
Crankcase Ventilation Assembly
Crankshaft
Crankshaft Hub
Cylinder Block Casting, Main Caps & Bolts
Cylinder Block Expansion Plugs
Cylinder Block Heater
Cylinder Head Casting and Bolts
Cylinder Head Expansion Plugs
Cylinder Head Gasket
EGR (Exhaust Gas Recirculation) Components
All components including pipes, clamps, fittings, & gaskets. Excludes: EGR
cooler vibration damper which is a maintenance item.
EGR Control Valve
EGR Cooler
EGR Mixing Chamber
22355293 (March 2014)
Page 1 of 4
Covered Standard Components List:
24 Months or 250,000 miles
Qualifications and Limitations
EGR System Wiring Harness
Electrical EA Harness Supplied with Engine
Electronic Control Unit (ECU)
Engine Brake Mechanism (VEB)
(From ECU to sensors and injectors)
For the failure to be covered under Emissions Components, the failure must
effect the emissions of the unit.
Diesel Particulate Filter Assembly (DPF) with
Diesel Oxidation Catalyst (DOC)
Includes: VEB Control valve and VEB Rocker arms. Factory installed only.
Includes: After-treatment Hydrocarbon Injector (AHI), After-treatment Wiring
Harness, After-treatment Control Module, Diffuser Pipe (AHI mounting), Fuel
lines to AHI Injector, AHI Shutoff Valve, AHI Fuel Pressure Sensor, Discharge
Recirculation Valve (Heat Mode), Discharge Recirculation Valve Solenoid, PreCatalyst Temperature Sensor, Post-Catalyst Temperature Sensor, Downstream
DPF Temperature Sensor, Differential Pressure Sensor.
Diesel Particulate Filter Assembly (DPF) with
Thermal Regenerator (TR)
Includes: Air Solenoid Valve, Atomization Block, After-treatment Wiring
Harness, After-treatment Control Module, Ignition Coil, Fuel Pump/Shutoff
Valve Assembly, Igniter (Spark Plug), Nozzle, Engine Exhaust Temperature
Sensor, Filter Inlet Temperature Sensor, Filter Outlet Temperature Sensor,
Flame Temperature Sensor, Differential Pressure Sensor.
Exhaust Manifold Casting
Exhaust Manifold Joint Seals, Gaskets, Wraps or Rings
Fan Belt Tensioner Assembly & Bracket
Excludes fan belt.
Flywheel
Flywheel Housing
Flywheel Ring Gear
Excludes failures caused by starter failure.
Fuel Filter Housing
Fuel Injector Sleeves
Seals included.
Fuel Injectors
Adjustments NOT covered.
Fuel Pressure Regulator Valve
Fuel Transfer Pump
Gaskets, Seals, O Rings, Silicon Sealant
Gears
All internal lubricated gears only.
Hoses and Lines, Supplied with Engine
Fluid carrying. Engine to engine mounted.
Idler Pulleys
Intake Manifold
Ladder Frame
Oil Cooler Core
Engine oil cooler.
Oil Fill Tube and Cap
Oil Filter Housing
Oil Pan
Oil Pump
Piston Coolers
Pistons, Rings and Liners
Wear out NOT covered.
Power Steering Pump
Pre-heater
Factory installed only.
PTO Drive / REPTO (Rear engine mounted PTO Drive)
Factory installed only. Excludes all pumps or driven devices.
Includes VEB Rockers and non-VEB rockers. Failures resulting from the valve
and injector adjustments not being maintained properly are NOT covered.
Normal maintenance adjustments are NOT covered.
SCR Assembly, DEF Pump Assembly (Pump Reverting Valve, Pump Pressure
Sensor), DEF Injector, DEF Tank Heating Control Valve.
Rocker Arm Assembly and Shafts
Selective Catalytic Reduction (SCR)
Sensor, Coolant Temperature
Sensor, Crankcase Pressure
Sensor, Crankshaft (Engine Timing)
Sensor, DPF Temperature & Pressure
Sensor, EGR Temp. and Pressure
Sensor, Engine Oil Level and Temp.
Sensor, Engine Oil Pressure
22355293 (March 2014)
Page 2 of 4
Covered Standard Components List:
24 Months or 250,000 miles
Qualifications and Limitations
Sensor, Engine Position (Camshaft)
Sensor, Fuel Pressure and Temperature
Sensor, Humidity
Sensor, Intake Boost Pressure and Temperature
Sensor, NOx (SCR Inlet and Outlet)
Sensor, Temperature & Pressure - Inlet Manifold Air
Starter Motor
Thermostat (Coolant)
Thermostat Side Cover (Coolant)
Towing
Covered 24 months/250k miles (402,000 kilometers)
Turbocharger Assembly
Includes the VGT Actuator Module.
Includes the valves, springs, keepers, guides, rotators and seats. Failures
resulting from the valve adjustments not being maintained properly are NOT
covered. Normal maintenance adjustments are NOT covered.
Valve Assembly
Valve Cover
Valve Yokes (Bridge) and Pins
Failures resulting from the valve adjustments not being maintained properly
are NOT covered. Normal maintenance adjustments are NOT covered.
Vibration Dampers and Bolts
Attached to the crankshaft or camshaft.
Water Pump Assembly
Water Pump Housing
Covered Major Components List:
60 Months or 500,000 Miles
Camshaft, Caps and Bolts
Qualifications and Limitations
Failures resulting from valve & injector adjustments not maintained properly
are NOT covered. Normal maintenance adjustments are NOT covered.
Connecting Rods, Caps, and Bolts
Coolant Pump Housing
Crankshaft
Cylinder Block Casting, Main Caps & Bolts
Cylinder Head Casting and Bolts
Exhaust Manifold Casting
Flywheel Housing
Intake Manifold
Ladder Frame
Oil Pump Drive and Driven Gears
Thermostat Housing (Coolant)
Timing Gear Cover and Mounting Plate
Volvo Trucks North America reserves the right to make any changes in design or to make additions to or upon its products without
incurring any obligations to install the same on vehicles previously built.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS OR CONDITIONS,
STATUTORY OR OTHERWISE, EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
22355293 (March 2014)
Page 3 of 4
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS: Volvo Trucks North America’s obligation is limited to, at its sole option, repair or replacement of parts which are
acknowledged by it to be defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur.
The defective parts or assemblies replaced shall become the property of Volvo Trucks North America. Warranty repairs performed by an
authorized Volvo Trucks dealer in accordance with the terms of the warranty set forth herein are free of charge. Warranty repairs do not
constitute an extension of the original warranty period for the engine or any part thereof. Warranty consideration can only be given if the
deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery and the engine must be made available, in a
timely fashion during the coverage period, for repair.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT, INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery
and the truck must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s unreasonable
delay in making the truck available, after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive speeds,
loading beyond the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to failure to follow
Volvo Trucks North America’s recommended service procedures are considered damages due to improper maintenance services.
PROGRESSIVE DAMAGE: Damages due to failure of operator to take reasonable precautions to mitigate damage are not covered. Damages to
covered part due to failure of non-covered part are not covered. Coverage is limited to failure of covered part directly causing failure of non-covered
part, where operator took reasonable precautions to mitigate damages.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle application
problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of vehicles being
operated in excess of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not covered.
FUEL INJECTORS: Damage to due to fuel injectors due to erosion caused by poor fuel quality is not covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North America’s
sole judgment, its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions, or does not perform as a result of improper conversion or installation of
special bodies or equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil filters,
adjustments of the engine, injection pump, and all other adjustments, are not covered. Parts which are normally consumed or worn out during the
engine’s normal service life and customarily replaced during usual maintenance service including but not limited to filters are not covered after the
first 30 days from the in-service date.
PERFORMANCE COMPLAINTS: Performance complaints are not covered (for example, low power and poor fuel economy) unless caused by the
failure of a qualified part.
OIL CONSUMPTION: Before a claim for excessive oil consumption will be considered, the owner must provide proof that all recommended
maintenance has been performed and submit adequate documentation to show that oil consumption exceeds Volvo Trucks North America published
standards. Under no circumstances will warranty pay for excessive oil consumption after 24 months or 250,000 miles (402,000 km), whichever
occurs fist.
WEAROUT: Volvo Trucks North America does not cover normal wear of covered parts. Cylinder liner, piston and piston rings failures attributable to
wear are specifically excluded from this warranty. The wear rate of parts in any engine, and especially those parts within the combustion area, will
vary depending upon operating conditions and environment. Conditions, such as load, trailer configuration, road speed and road conditions, as well
as the quality of fuel, lubrication oil, and all filters bear a direct relationship to the wear rate and resulting life of parts. Depending upon the severity of
these various conditions, parts wear and resulting failure could occur within the time limit of the coverage.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units,
which do not meet factory standards and which cause a vehicle component or system to fail, are not covered.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual
mileage cannot be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules;
failure to do so may result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue, rental
vehicles, or driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter
elements and labor performed by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable
repair, additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks
North America factory manufacturing records will be determinative as to factory installed components.
TOWING: Towing and/or road service charges due to a failure of a non-covered component or from the result of an accident are not covered.
Towing coverage is limited to a single tow per incident for covered vehicles that are accessible from a MAJOR paved highway and towed to the
nearest authorized Volvo Trucks service center when a vehicle is inoperable or continued operation would result in additional damage due to a
component listed in the Plan’s component coverage list.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
22355293 (March 2014)
Page 4 of 4
standard eNGINE warranty
certificate (EPA 17 and Newer)
Volvo Group North America LLC, d/b/a Volvo Trucks North America, (“Volvo Trucks”) warrants certain individual components of
each new Volvo D11, D13 and D16 EPA 17 and newer emission engine in a new Volvo truck to be free from defects in material
and workmanship under normal use and service up to the periods specified, provided all Volvo Trucks maintenance and
inspection requirements are followed. See your local authorized Volvo Trucks dealer for recommended maintenance and
inspection procedures. All warranty periods are calculated from the date in service of the vehicle. All coverage is 100% for parts
and labor subject to the qualifications, limitations and exclusions as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE FOLLOWING PAGES OF THIS CERTIFICATE.
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to only new Volvo D11, D13, and D16 engines meeting EPA 17 and newer emission requirements in new Volvo trucks
operated in the United States and Canada. Volvo Trucks reserves the right to make the same changes in design, or make additions to or upon
its products, without incurring any obligations to make the same changes on engines previously built.
Standard Volvo Engine Components Coverage: 24 months or 250,000 miles (402,336 kilometers), whichever occurs first, unless
otherwise noted.
Major Components Coverage: 60 months or 500,000 miles (804,672 kilometers), whichever occurs first.
USE OF IMPROPER OR UNAPPROVED FUEL OR ENGINE OIL WILL VOID THE ENGINE AND AFTER TREATMENT SYSTEM
(DIESEL PARTICULATE FILTER) WARRANTIES. EPA 17 EMISSION VOLVO ENGINES REQUIRE THE USE OF VOLVO
SPECIFICATION VDS 4.5 HIGH PERFORMANCE DIESEL ENGINE OIL AND ULTRA LOW SULFUR DIESEL (ULSD) FUEL.
USE OF FLUIDS OTHER THAN API CERTIFIED DIESEL EXHAUST FLUID (DEF) WILL COMPROMISE AFTERTREATMENT
SYSTEM PERFORMANCE, INCREASE EMISSIONS, AND MAY IMPACT THIS TRUCKS PRODUCT WARRANTIES.
SEE FOLLOWING TABLE FOR SPECIFIC COVERAGES:
Covered Standard Engine Components List:
24 Months or 250,000 miles or 402,336 kilometers
Qualifications and Limitations
Air Compressor
Includes: sprocket and mounting bolts
Bearings
All internal lubricated bearings and bushings only.
Camshaft, Caps and Bolts
Failures resulting from the valve and injector adjustments not being maintained properly
are NOT covered. Normal maintenance adjustments are NOT covered.
Connecting Rods, Caps, and Bolts
Coolant Duct Cover
Crankcase Ventilation Assembly
Crankshaft
Crankshaft Hub
Cylinder Block
Includes: Casting, main caps, bolts
Cylinder Block Heater
Cylinder Head
Diesel Particulate Filter Assembly (DPF) / Diesel Oxidation
Catalyst (DOC) / Selective Catalytic Reduction (SCR)
(add all together)
Includes: assembly, casting, bolts, plugs, sleeves
Includes: After-treatment hydrocarbon injector (AHI), after-treatment wiring harness, after-treatment
control module, diffuser pipe (AHI mounting), fuel lines to AHI injector, AHI shutoff valve, AHI fuel
pressure sensor, pre-catalyst temperature sensor, post-catalyst temperature sensor, downstream
DPF temperature sensor, differential pressure sensor, particulate matter (PM) sensor, SCR
assembly, DEF pump assembly (pump reverting valve, pump pressure sensor), DEF injector, DEF
tank heating control valve, NOx (SCR Inlet and Outlet)
Continued on Page 2…
THIS WARRANTY IS MADE EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES OR CONDITIONS, STATUTORY OR OTHERWISE,
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATION OR LIABILITY ON THE PART OF THE MANUFACTURER INCLUDING,
WITHOUT LIMITATION OF THE FOREGOING, CONSEQUENTIAL AND INCIDENTAL DAMAGES. VOLVO TRUCKS NEITHER ASSUMES NOR
AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF VEHICLES, COMPONENTS
OR PARTS.
April 2016
Page 1 of 3
Covered Standard Engine Components List:
24 Months or 250,000 miles or 402,336 kilometers
Qualifications and Limitations
EGR (Exhaust Gas Recirculation) Components
All components including clamps, control valve, cooler, fittings, gaskets, mixer, pipes,
and EGR wiring harness. Excludes: EGR cooler vibration damper which is a
maintenance item.
(From EECU to sensors and injectors and actuators)
Electrical EA Harness Supplied with Engine
Engine Electronic Control Unit (EECU)
Engine Brake Mechanism (VEB)
Exhaust Manifold
Fan Belt Tensioner Assembly and Bracket
Flywheel
Fuel Filter Housing
Fuel Injection System
Fuel Transfer Pump
Gaskets, Seals, O Rings, Silicon Sealant
Gears
Hoses and Lines, Supplied with Engine
Idler Pulleys
Intake Manifold and Throttle Assembly
Ladder Frame
Pneumatic Control System
Oil Cooler
Oil Fill Tube and Cap
Oil Filter Housing
Oil Pan
Oil Pump
Piston Assembly
Power Steering Pump
Pre-Heater
PTO Drive / REPTO (Rear Engine Mounted PTO Drive)
Rocker Arm Assembly and Shafts
Sensors (On Engine)
Starter Motor
Thermostat (Coolant)
Towing
Turbocharger Assembly
Valve Assembly
Valve Cover
Valve Yokes (Bridge) and Pins
Vibration Dampers and Bolts
Water Pump Assembly
Covered Major Engine Components List:
60 Months or 500,000 miles or 804,672 kilometers
Camshaft, Caps and Bolts
Connecting Rods, Caps and Bolts
Crankshaft Forging
Cylinder Block Casting, Main Caps and Bolts
Cylinder Head Casting and Bolts
Exhaust Manifold Casting
Flywheel Housing
Gears
Intake Manifold Housing
Ladder Frame
Thermostat Housing
Timing Gear Cover and Mounting Plate
April 2016
Includes: VEB control valve and VEB rocker arms (factory installed only)
Turbo Compound (TC) engine: Closed loop butterfly (CLB)
Includes: Casting, joint seals, rings or wraps
Excludes: Fan belts
Includes: Housing and ring gear
Excludes: Filters
Includes: Injectors, common rail assembly (electronic fuel pressure regulator & pressure
sensor)
All internally lubricated gears only (timing and idler gears)
Fluid carrying: engine to engine mounted
TC Engine: Air valve unit, buffer valve unit, check valve
Engine oil cooler only
Excludes: Oil filters
Includes: Cooler nozzles, liners, pistons, rings
Includes: Preheat relay, terminals, power cables. Factory installed only.
Factory installed only; Excludes all pumps or driven gears
Includes: VEB rockers and non-VEB rockers. Failures resulting from the valve and
injector adjustments not being maintained properly are NOT covered. Normal
maintenance adjustments are NOT covered.
Includes: Coolant temperature, crankcase pressure, crankshaft (engine timing), EGR
temperature and pressure, engine oil level and temperature, engine oil pressure, engine
position (camshaft), fuel pressure and temperature, intake boost pressure and
temperature, inlet manifold air (temperature and pressure),
Includes: Thermostat side cover
Covered for 24 months/250,000 miles (402,336 kilometers); Refer Paragraph 19 on
Page 3.
Includes: VGT actuator module, Turbo compounding assembly, if included
Includes: Guides, keepers, rotators, seats, springs, valves; failures resulting from the
valve adjustments not being maintained properly are NOT covered. Normal maintenance
adjustments are NOT covered.
Failures resulting from the valve adjustments not being maintained properly are NOT
covered. Normal maintenance adjustments are NOT covered.
Qualifications and Limitations
Failures resulting from the valve & injector adjustments not being maintained properly are
NOT covered. Normal maintenance adjustments are NOT covered.
All internally lubricated gears only (timing and idler gears)
Page 2 of 3
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS: Volvo Trucks obligation is limited to, at its sole option, repair or replacement of parts which are acknowledged by it to be
defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur. The defective parts or assemblies
replaced shall become the property of Volvo Trucks. Warranty repairs performed by an authorized Volvo Trucks dealer in accordance with the
terms of the warranty set forth herein are free of charge. Warranty repairs do not constitute an extension of the original warranty period for the
engine or any part thereof. Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks
dealer upon discovery and the engine must be made available, in a timely fashion during the coverage period, for repair.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT, INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery and the
truck must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s unreasonable delay in making the
truck available, after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive speeds, loading
beyond the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to failure to follow Volvo Trucks
North America’s recommended service procedures are considered damages due to improper maintenance services.
PROGRESSIVE DAMAGE: Damages due to failure of operator to take reasonable precautions to mitigate damage are not covered. Damages to covered
part due to failure of non-covered part are not covered. Coverage is limited to failure of covered part directly causing failure of non-covered part, where
operator took reasonable precautions to mitigate damages.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle application
problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of vehicles being operated in
excess of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not covered.
FUEL INJECTORS: Damage to due to fuel injectors due to erosion caused by poor fuel quality is not covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North America’s sole
judgment, its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions, or does not perform as a result of improper conversion or installation of special
bodies or equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil filters,
adjustments of the engine, injection pump, and all other adjustments, are not covered. Parts which are normally consumed or worn out during the engine’s
normal service life and customarily replaced during usual maintenance service including but not limited to filters are not covered after the first 30 days from
the in-service date.
PERFORMANCE COMPLAINTS: Performance complaints are not covered (for example, low power and poor fuel economy) unless caused by the failure
of a qualified part.
OIL CONSUMPTION: Before a claim for excessive oil consumption will be considered, the owner must provide proof that all recommended maintenance
has been performed and submit adequate documentation to show that oil consumption exceeds Volvo Trucks North America published standards. Under no
circumstances will warranty pay for excessive oil consumption after 24 months or 250,000 miles (402336 km), whichever occurs first.
WEAROUT: Volvo Trucks North America does not cover normal wear of covered parts. Cylinder liner, piston and piston rings failures attributable to wear
are specifically excluded from this warranty. The wear rate of parts in any engine, and especially those parts within the combustion area, will vary depending
upon operating conditions and environment. Conditions, such as load, trailer configuration, road speed and road conditions, as well as the quality of fuel,
lubrication oil, and all filters bear a direct relationship to the wear rate and resulting life of parts. Depending upon the severity of these various conditions,
parts wear and resulting failure could occur within the time limit of the coverage.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units, which do
not meet factory standards and which cause a vehicle component or system to fail, are not covered.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual mileage
cannot be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules; failure to
do so may result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue, rental
vehicles, or driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter elements and
labor performed by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable repair,
additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks North America
factory manufacturing records will be determinative as to factory installed components.
TOWING: Towing and/or road service charges due to a failure of a non-covered component or from the result of an accident are not covered. Towing
coverage is limited to a single tow per incident for covered vehicles that are accessible from a MAJOR paved highway and towed to the nearest authorized
Volvo Trucks service center when a vehicle is inoperable or continued operation would result in additional damage due to a component listed in the Plan’s
component coverage list. When towing is covered on this certificate, charges in excess of $1,000.00 will be rejected unless Volvo Action Service is
contacted.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
April 2016
Page 3 of 3
888900
Base Chassis Towing Coverage, 90 Day / 5000 Miles / 8050 KM
Affects:
Related:
Updated:
VN, VHD
May 11, 2016
Note: PDF files are not official documents and serve only as reference items.
Refer to the Standard Truck Warranty Certificate below for Base Chassis Towing
Coverage:
Standard Truck Warranty Coverage Certificate
(Model Year 2016 and newer)
Page 1 of 3
© 2016 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
STANDARD TRUCK WARRANTY
CERTIFICATE
Volvo Group North America LLC, d/b/a Volvo Trucks North America, warrants certain individual components of the new Volvo truck to be free from defects in material and workmanship under
normal use and service up to the periods as specified, provided all Volvo Trucks North America maintenance and inspection requirements found in the Operator’s Manuals and service
manuals/instructions are followed. All warranty periods are calculated from date in service. All coverage is 100% for parts and labor except as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE REVERSE SIDE OF THIS CERTIFICATE. THESE
LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to Model Year 2016 and newer VNL, VNM, VNX, VHD and VAH models manufactured by Volvo Trucks North America operated in the United States and Canada.
Specific coverage is based on the application and weight class as described in the following chart:
Typical Vocations
Standard
Standard
Standard
NORMAL DUTY
HEAVY DUTY
SEVERE DUTY
Line / Long Haul,
Short Haul, or Pickup & Delivery
Heavy Line Haul,
Construction, Refuse, Fire
or Rescue Service
Heavy Construction, Heavy Refuse, Off- Road,
Heavy Haul, Mining, Logging, or Oil Field
Vehicle must have
Vehicle must have
GAWR > 46,000 lbs. (> 21 mt.)
GVWR < 63,000 lbs. (< 28 metric tons)
GVWR < 80,000 lbs. (< 36 mt.)
or
or
or
GVWR > 80,000 lbs. (> 36 mt.)
GCWR < 110,000 lbs. (< 50 mt.)
GCWR < 143,000 lbs. (< 65 mt.)
Vehicle must have
Weight Class
Qualifications
or
GCWR > 143,000 lbs. (> 65 mt.)
Basic Coverage
Chassis Towing
Air Conditioning
Engine / Emission
12 months or
100,000 miles (160 934 km)
12 months or
100,000 miles (160 934 km)
12 months or
100,000 miles (160 934 km)
Towing/Road Service coverage is limited to 90 days or 5,000 miles (8047 km), whichever occurs first.
See paragraph 22.
Not Applicable
Air conditioning (sealed system only) is covered for 12 months with no mileage limitation.
Not covered under this warranty certificate. See respective engine manufacturer’s warranty certificate. See paragraph 14.
36 months or 350,000 miles (563 270 km)
Transmission, Driveline,
Covered Components are as follows:
Rear Axle, Front Non-Drive
• Manual Transmission–Transmission assembly
Steer Axle
• Rear Axle–Differential carrier assembly & axle housing
• Driveline–Bearings, hangers & shafts
12 months or
100,000 miles (160,934 km)
• Front Non-Drive Steer Axle–Axle beam, steering knuckle, & tie rod
Allison Automatic Transmissions are not covered under this warranty certificate. See paragraph14.
I-Shift Clutch
Engine Torque < 1750 ft/lb: 60 months or
750,000 miles (1 207 008 km) *
Engine Torque > 1750 ft/lb: 36 months or
500,000 miles (804 672 km)
36 months or
300,000 miles (482 803 km)
I-Shift Towing
Towing and Roadside Assistance on warrantable failures are covered for 24 months or 250,000
I-Shift Transmission
Cab Structure
Internal Cab Corrosion
Frame Rail /
Crossmembers
Noise Emission
I-Shift: 36 months or
250,000 miles (402 336 km);
I-Shift Severe Duty: 36 months
with no mileage limitation
36 months or
250,000 miles (402 336 km);
I-Shift and I-shift Severe Duty
I-Shift: 12 months or
100,000 miles (160 934 km);
I-Shift Severe Duty: 24 months
with no mileage limitation
I-Shift: 12 months or
100,000 miles (160 934 km);
I-Shift Severe Duty: 24 months or
250,000 miles (402 336 km)
Not Applicable
miles (402 336 km) whichever occurs first. See paragraph 22.
60 months or
60 months or
36 months or
500,000 miles (804 672 km)
500,000 miles (804 672 km)
250,000 miles (402 336 km)
60 months or
60 months or
48 months or
500,000 miles (804 672 km)
500,000 miles (804 672 km)
350,000 miles (563 270 km)
Covered only where metal is perforated from the inside to the outside. See paragraph 13.
72 months or
60 months or
36 months or
750,000 miles (1 207 008 km)
500,000 miles (804 672 km)
250,000 miles (402 336 km)
LIFE OF VEHICLE: Volvo Trucks North America warrants to the first purchaser of this vehicle for purposes other than resale, and to each subsequent
purchaser, that this vehicle was designed, built and equipped to conform, at the time of sale to such first purchaser, with all applicable U.S. EPA noise
control regulations. This warranty is not limited to any vehicle particular part, component, or system of the vehicle. Defects in the design, assembly or any
part, component or system of the vehicle which at the time of sale to such first purchaser, caused noise emission levels to exceed Federal standards
are covered by this warranty for the life of the vehicle. EXCLUSIONS: Failures which arise as a result of tampering rather than from defects in the
design, assembly, or any part, components, or system of the vehicle are not covered by this warranty.
*Includes Sales Codes: 1017X9, 1017Y0, 1017Y1, 1017Y2, 1017Y3, 1017Y4
Volvo Trucks North America reserves the right to make any changes in design or to make additions to or upon its
products without incurring any obligations to install the same on vehicles previously built.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS OR CONDITIONS,
STATUTORY OR OTHERWISE, EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
April 2016
Page 1 of 2
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS – Volvo Trucks North America’s obligation is limited to, at its sole option, repair or replacement of parts which are acknowledged by it
to be defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur. The defective parts or assemblies
replaced shall become the property of Volvo Trucks North America. Warranty repairs performed by an authorized Volvo trucks dealer in accordance
with the terms of the warranty set forth herein are free of charge. Warranty repairs do not constitute an extension of the original warranty period for
the vehicle or any part thereof. Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks
dealer upon discovery and the vehicle must be made available, in a timely fashion during the coverage period, for repair.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT OR INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery and the truck
must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s unreasonable delay in making the truck available,
after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive speeds, loading beyond
the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to failure to follow Volvo Trucks North America’s
recommended service procedures are considered damages due to improper maintenance services.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle application
problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of vehicles being operated in excess
of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not covered.
ENVIRONMENTAL DAMAGE: Parts made out of cloth, leather, wood, rubber, synthetics, paint or chrome which have been effected by exposure to the
elements or chemical influence including, but not limited to road salts/chemicals, industrial fall-out or the use of improper cleaners, polishes, and or waxes are not
covered.
GLASS: Glass breakage and scratches are not covered unless positive physical proof of manufacturing responsibility is established.
SUSPENSION PARTS: Suspension parts, including but not limited to rubber bushings, torque rod bushings, spring pins and bushings, and all greased
lubrication points that fail due to improper maintenance, abnormally severe service or abuse are not covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North America’s sole judgment,
its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions or does not perform as a result of improper conversion or installation of special bodies or
equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil filters, adjustments of
the engine injection pump / transmission / brakes / linkages, as well as diagnosis, test time and all other adjustments, are not covered. Parts which are normally
consumed or worn out during the vehicle’s usual service life and customarily replaced during usual maintenance service are not covered or have limited coverage.
These parts include, but are not limited to, the following:
NOT COVERED - Brake linings, clutch brake, clutch linings, mud flaps and brackets.
COVERED FOR 30 DAYS - Fluorescent lights or ballast, light bulbs, fuses, wiper blades and all filters (oil, fuel, air, etc.).
COVERED FOR 90 DAYS – Loose fasteners, leaking fittings, or hose clamps.
COVERED FOR 12 MONTHS, OR 100,000 MILES (160 934 km), WHICHEVER OCCURS FIRST - Cab suspension on models used in heavy duty applications,
batteries, frame paint, sealed light assemblies, exhaust flex pipe, hose clamps, all rubber/nylon bushings or mounts, flexible hoses, all belts, shock absorbers (leakage
only), wheel seals, and all grease lubricated points (including non-serviceable tie rods ends, king-pins, u-joints, spring pins, drag links, and the like.)
ALIGNMENT: Alignment of axle(s) and balancing of tires, including changing of axle camber, caster, toe and thrust angle settings are not covered.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units, which do not
meet factory standards and which cause a vehicle component or system to fail are not covered.
TIRES: Tires are covered by separate warranties given by their respective manufacturers.
CAB STRUCTURE AND CORROSION: Cab structural defects or cab corrosion that occurs in areas of the cab that have been previously damaged, repaired,
altered or modified are not covered. Cab corrosion where metal is perforated from the outside to the inside is not covered.
ENGINES AND AUTOMATIC TRANSMISSIONS: The engines and Allison automatic transmissions used in Volvo trucks are warranted by their respective
manufacturers and not by Volvo Trucks North America. Refer to the engine and transmission manufacturers’ warranty statements.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual mileage cannot
be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules; failure to do so may
result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue, rental vehicles, or
driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter elements and labor performed
by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable repair,
additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks North America factory
manufacturing records will be determinative as to factory installed components.
APPLICATION CHANGE OR CHANGE OF OWNERSHIP: If at any time during the term of the original warranty there is a change in the application of the
vehicle or a change in ownership, the owner must notify Volvo Trucks North America, Post Office Box 26115, Greensboro, NC 27402-6115 in writing and within
30 days of date of the change. Failure to provide such timely notice may result in the warranty becoming null and void. If the change in ownership is accepted by
Volvo Trucks North America, and/or the change in application does not affect coverage, Volvo Trucks North America will transfer any remaining applicable portion of
the warranty to the new owner or for the new application.
TOWING: Towing and/or road service charges due to a failure of a non-covered component or from the result of an accident are not covered. Towing coverage is
limited to a single tow per incident for covered vehicles that are accessible from a MAJOR paved highway and towed to the nearest authorized Volvo Trucks service
center when a vehicle is inoperable or continued operation would result in additional damage due to a component listed in the Plan’s component coverage list. When
towing is covered on this certificate, charges in excess of $1,000.00 will be rejected unless Volvo Action Service is contacted.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
April 2016
Page 2 of 2
866001
Remote Diagnostics, ASIST and Volvo Action Service –
24 months
Affects:
Related:
Updated:
VN, VHD, VAH
Engine Package (101) - Available with Volvo Engines Only
July 9, 2015
The Remote Diagnostics bundle includes:
 Volvo Action Service 24/7 Class 8 support
 ASIST service management tool
 Remote Diagnostics (Volvo Engine Required)
Volvo Action Service- Ensures 24/7 Support
With Volvo Action Service (VAS), fleet managers are assured that Class 8 expert support is
always available. Trained customer service analysts are available around the clock to guide
drivers through vehicle repairs, service scheduling, and any other assistance needed out on
the road.
The goal of VAS is to reduce vehicle downtime by quickly and efficiently scheduling and
managing service and/or repairs to get the vehicle and the customer’s load back on the road.
Volvo Action Service (VAS) includes the following:
• 24-hour Roadside Service (1-800-52VOLVO)
• No-Fee Case Management (Tractor)
• Repair Follow-up
• Emergency Parts Locating/Expediting
• Customer Internet Case Management Access
ASIST- Streamlined service management tool
ASIST is a web-based service communication platform that helps your customers and your dealership work
together -- in real time -- to expedite repairs and increase uptime. ASIST provides the tools they need to better
manage costs, reduce downtime, and maximize the performance of every vehicle in their fleet.
With ASIST, customers, maintenance managers, and dealer service personnel stay in communication -- easily
and instantly -- throughout the write-up and repair process. Customers can quickly authorize service steps and
receive status alerts during the entire service event. Customers receive a login and password allowing access
the system and see the service history of their trucks including current services in progress.
ASIST is the tool used by Volvo Action Service for all Remote Diagnostics cases. When a Remote Diagnostics
issue is detected, the truck will open a case and communicate data directly into ASIST so the customer and the
Volvo's 24/7 Uptime Center have visibility to the service issue.
Remote Diagnostics
 Proactive diagnostic and repair planning assistance with detailed analysis of diagnostic trouble codes.
 Streamlined service procedures with parts on-hand confirmation before truck arrives for service.
 Live Dealer and customer communication through Volvo Action Service (VAS).
 Service case communication and documentation between Volvo Action Service, Dealer and customer
provided through ASIST.
 As of April 2015 (Model Year 2016) Volvo Trucks connected vehicle services will be adding I-SHIFT
Diagnostic Trouble codes to Remote diagnostics.
 Enhancement will include 3 severe transmission faults (Oil temperature, Clutch system, Gear brake
valve), these codes are dynamic and they can change at any time based on warranty data.
Page 1 of 2
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Volvo Action Service at (336) 393-4600. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
866001
Remote Diagnostics, ASIST and Volvo Action Service –
24 months
Updated:
July 9, 2015
We get the driver back
on the road as quickly
as possible
The truck sets a
diagnostic trouble code
The decision-maker receives
fast accurate service
estimates and real-time repair
event updates
When the driver sees a
problem, Volvo sees it
too. We diagnose the
problem.
We find the closest Volvo
dealer, verify the right parts
are on hand and contact the
decision-maker through
ASIST contact preferences.
Remote Diagnostics
Each new Volvo includes 2 years of:
 Volvo Action Service (VAS) - (Sales Code 867xxx)
 ASIST - (Sales Code 867xxx)
 Remote Diagnostics (Volvo Engine Required) - (Sales Code 866xxx)
After the two years:
 Remote Diagnostics Bundle is available through a low monthly subscription. Check TDP for Pricing.
Page 2 of 2
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
867001
ASIST and Volvo Action Service – 24 months
Affects:
Related:
Updated:
VN, VHD, VAH
May 2, 2014
The Uptime Center bundle includes Volvo Action Service 24/7 Class 8 support as well as the
ASIST service management tool.
Volvo Action Service- Ensures 24/7 Support
With Volvo Action Service (VAS), fleet managers are assured that Class 8 expert
support is always available. Trained customer service analysts are available around
the clock to guide drivers through vehicle repairs, service scheduling, and any other
assistance needed out on the road.
The goal of VAS is to reduce vehicle downtime by quickly and efficiently scheduling
and managing service and/or repairs to get the vehicle and the customer’s load back
on the road.
Volvo Action Service includes the following:
• 24-hour Roadside Service (1-800-52VOLVO)
• No-Fee Case Management (Tractor)
• Repair Follow-up
• Emergency Parts Locating/Expediting
• Customer Internet Case Management Access
ASIST- Streamlined service management tool
ASIST is a web-based service communication platform that helps your customers and your dealership work
together -- in real time -- to expedite repairs and increase uptime. ASIST provides the tools they need to better
manage costs, reduce downtime, and maximize the performance of every vehicle in their fleet.
With ASIST, customers, maintenance managers, and dealer service personnel stay in communication -- easily
and instantly -- throughout the write-up and repair process. Customers can quickly authorize service steps and
receive status alerts during the entire service event. Customers receive a login and password allowing access
the system and see the service history of their trucks including current services in progress.
ASIST is the tool used by Volvo Action Service for all Remote Diagnostics cases. When a Remote Diagnostics
issue is detected, the truck will open a case and communicate data directly into ASIST so the customer and the
Volvo's 24/7 Uptime Center have visibility to the service issue.
Each new Volvo includes 2 years of:
• Volvo Action Service (VAS)
• ASIST
After the two years:
• Uptime Bundle is available through a low monthly subscription. Check TDP for Pricing.
Page 1 of 1
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Volvo Action Service at (336) 393-4600. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
899302
Heavy Duty Standard Base Coverage
12 Months / 100,000 Miles
Affects:
Related:
Updated:
VN, VHD
May 11, 2016
Note: PDF files are not official documents and serve only as reference items.
Standard Truck Warranty Coverage Certificate
(Model Year 2016 and newer)
Page 1 of 3
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
STANDARD TRUCK WARRANTY
CERTIFICATE
Volvo Group North America LLC, d/b/a Volvo Trucks North America, warrants certain individual components of the new Volvo truck to be free from defects in material and workmanship under
normal use and service up to the periods as specified, provided all Volvo Trucks North America maintenance and inspection requirements found in the Operator’s Manuals and service
manuals/instructions are followed. All warranty periods are calculated from date in service. All coverage is 100% for parts and labor except as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE REVERSE SIDE OF THIS CERTIFICATE. THESE
LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to Model Year 2016 and newer VNL, VNM, VNX, VHD and VAH models manufactured by Volvo Trucks North America operated in the United States and Canada.
Specific coverage is based on the application and weight class as described in the following chart:
Typical Vocations
Standard
Standard
Standard
NORMAL DUTY
HEAVY DUTY
SEVERE DUTY
Line / Long Haul,
Short Haul, or Pickup & Delivery
Heavy Line Haul,
Construction, Refuse, Fire
or Rescue Service
Heavy Construction, Heavy Refuse, Off- Road,
Heavy Haul, Mining, Logging, or Oil Field
Vehicle must have
Vehicle must have
GAWR > 46,000 lbs. (> 21 mt.)
GVWR < 63,000 lbs. (< 28 metric tons)
GVWR < 80,000 lbs. (< 36 mt.)
or
or
or
GVWR > 80,000 lbs. (> 36 mt.)
GCWR < 110,000 lbs. (< 50 mt.)
GCWR < 143,000 lbs. (< 65 mt.)
Vehicle must have
Weight Class
Qualifications
or
GCWR > 143,000 lbs. (> 65 mt.)
Basic Coverage
Chassis Towing
Air Conditioning
Engine / Emission
12 months or
100,000 miles (160 934 km)
12 months or
100,000 miles (160 934 km)
12 months or
100,000 miles (160 934 km)
Towing/Road Service coverage is limited to 90 days or 5,000 miles (8047 km), whichever occurs first.
See paragraph 22.
Not Applicable
Air conditioning (sealed system only) is covered for 12 months with no mileage limitation.
Not covered under this warranty certificate. See respective engine manufacturer’s warranty certificate. See paragraph 14.
36 months or 350,000 miles (563 270 km)
Transmission, Driveline,
Covered Components are as follows:
Rear Axle, Front Non-Drive
• Manual Transmission–Transmission assembly
Steer Axle
• Rear Axle–Differential carrier assembly & axle housing
• Driveline–Bearings, hangers & shafts
12 months or
100,000 miles (160,934 km)
• Front Non-Drive Steer Axle–Axle beam, steering knuckle, & tie rod
Allison Automatic Transmissions are not covered under this warranty certificate. See paragraph14.
I-Shift Clutch
Engine Torque < 1750 ft/lb: 60 months or
750,000 miles (1 207 008 km) *
Engine Torque > 1750 ft/lb: 36 months or
500,000 miles (804 672 km)
36 months or
300,000 miles (482 803 km)
I-Shift Towing
Towing and Roadside Assistance on warrantable failures are covered for 24 months or 250,000
I-Shift Transmission
Cab Structure
Internal Cab Corrosion
Frame Rail /
Crossmembers
Noise Emission
I-Shift: 36 months or
250,000 miles (402 336 km);
I-Shift Severe Duty: 36 months
with no mileage limitation
36 months or
250,000 miles (402 336 km);
I-Shift and I-shift Severe Duty
I-Shift: 12 months or
100,000 miles (160 934 km);
I-Shift Severe Duty: 24 months
with no mileage limitation
I-Shift: 12 months or
100,000 miles (160 934 km);
I-Shift Severe Duty: 24 months or
250,000 miles (402 336 km)
Not Applicable
miles (402 336 km) whichever occurs first. See paragraph 22.
60 months or
60 months or
36 months or
500,000 miles (804 672 km)
500,000 miles (804 672 km)
250,000 miles (402 336 km)
60 months or
60 months or
48 months or
500,000 miles (804 672 km)
500,000 miles (804 672 km)
350,000 miles (563 270 km)
Covered only where metal is perforated from the inside to the outside. See paragraph 13.
72 months or
60 months or
36 months or
750,000 miles (1 207 008 km)
500,000 miles (804 672 km)
250,000 miles (402 336 km)
LIFE OF VEHICLE: Volvo Trucks North America warrants to the first purchaser of this vehicle for purposes other than resale, and to each subsequent
purchaser, that this vehicle was designed, built and equipped to conform, at the time of sale to such first purchaser, with all applicable U.S. EPA noise
control regulations. This warranty is not limited to any vehicle particular part, component, or system of the vehicle. Defects in the design, assembly or any
part, component or system of the vehicle which at the time of sale to such first purchaser, caused noise emission levels to exceed Federal standards
are covered by this warranty for the life of the vehicle. EXCLUSIONS: Failures which arise as a result of tampering rather than from defects in the
design, assembly, or any part, components, or system of the vehicle are not covered by this warranty.
*Includes Sales Codes: 1017X9, 1017Y0, 1017Y1, 1017Y2, 1017Y3, 1017Y4
Volvo Trucks North America reserves the right to make any changes in design or to make additions to or upon its
products without incurring any obligations to install the same on vehicles previously built.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS OR CONDITIONS,
STATUTORY OR OTHERWISE, EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
April 2016
Page 1 of 2
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS – Volvo Trucks North America’s obligation is limited to, at its sole option, repair or replacement of parts which are acknowledged by it
to be defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur. The defective parts or assemblies
replaced shall become the property of Volvo Trucks North America. Warranty repairs performed by an authorized Volvo trucks dealer in accordance
with the terms of the warranty set forth herein are free of charge. Warranty repairs do not constitute an extension of the original warranty period for
the vehicle or any part thereof. Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks
dealer upon discovery and the vehicle must be made available, in a timely fashion during the coverage period, for repair.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT OR INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery and the truck
must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s unreasonable delay in making the truck available,
after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive speeds, loading beyond
the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to failure to follow Volvo Trucks North America’s
recommended service procedures are considered damages due to improper maintenance services.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle application
problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of vehicles being operated in excess
of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not covered.
ENVIRONMENTAL DAMAGE: Parts made out of cloth, leather, wood, rubber, synthetics, paint or chrome which have been effected by exposure to the
elements or chemical influence including, but not limited to road salts/chemicals, industrial fall-out or the use of improper cleaners, polishes, and or waxes are not
covered.
GLASS: Glass breakage and scratches are not covered unless positive physical proof of manufacturing responsibility is established.
SUSPENSION PARTS: Suspension parts, including but not limited to rubber bushings, torque rod bushings, spring pins and bushings, and all greased
lubrication points that fail due to improper maintenance, abnormally severe service or abuse are not covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North America’s sole judgment,
its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions or does not perform as a result of improper conversion or installation of special bodies or
equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil filters, adjustments of
the engine injection pump / transmission / brakes / linkages, as well as diagnosis, test time and all other adjustments, are not covered. Parts which are normally
consumed or worn out during the vehicle’s usual service life and customarily replaced during usual maintenance service are not covered or have limited coverage.
These parts include, but are not limited to, the following:
NOT COVERED - Brake linings, clutch brake, clutch linings, mud flaps and brackets.
COVERED FOR 30 DAYS - Fluorescent lights or ballast, light bulbs, fuses, wiper blades and all filters (oil, fuel, air, etc.).
COVERED FOR 90 DAYS – Loose fasteners, leaking fittings, or hose clamps.
COVERED FOR 12 MONTHS, OR 100,000 MILES (160 934 km), WHICHEVER OCCURS FIRST - Cab suspension on models used in heavy duty applications,
batteries, frame paint, sealed light assemblies, exhaust flex pipe, hose clamps, all rubber/nylon bushings or mounts, flexible hoses, all belts, shock absorbers (leakage
only), wheel seals, and all grease lubricated points (including non-serviceable tie rods ends, king-pins, u-joints, spring pins, drag links, and the like.)
ALIGNMENT: Alignment of axle(s) and balancing of tires, including changing of axle camber, caster, toe and thrust angle settings are not covered.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units, which do not
meet factory standards and which cause a vehicle component or system to fail are not covered.
TIRES: Tires are covered by separate warranties given by their respective manufacturers.
CAB STRUCTURE AND CORROSION: Cab structural defects or cab corrosion that occurs in areas of the cab that have been previously damaged, repaired,
altered or modified are not covered. Cab corrosion where metal is perforated from the outside to the inside is not covered.
ENGINES AND AUTOMATIC TRANSMISSIONS: The engines and Allison automatic transmissions used in Volvo trucks are warranted by their respective
manufacturers and not by Volvo Trucks North America. Refer to the engine and transmission manufacturers’ warranty statements.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual mileage cannot
be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules; failure to do so may
result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue, rental vehicles, or
driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter elements and labor performed
by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable repair,
additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks North America factory
manufacturing records will be determinative as to factory installed components.
APPLICATION CHANGE OR CHANGE OF OWNERSHIP: If at any time during the term of the original warranty there is a change in the application of the
vehicle or a change in ownership, the owner must notify Volvo Trucks North America, Post Office Box 26115, Greensboro, NC 27402-6115 in writing and within
30 days of date of the change. Failure to provide such timely notice may result in the warranty becoming null and void. If the change in ownership is accepted by
Volvo Trucks North America, and/or the change in application does not affect coverage, Volvo Trucks North America will transfer any remaining applicable portion of
the warranty to the new owner or for the new application.
TOWING: Towing and/or road service charges due to a failure of a non-covered component or from the result of an accident are not covered. Towing coverage is
limited to a single tow per incident for covered vehicles that are accessible from a MAJOR paved highway and towed to the nearest authorized Volvo Trucks service
center when a vehicle is inoperable or continued operation would result in additional damage due to a component listed in the Plan’s component coverage list. When
towing is covered on this certificate, charges in excess of $1,000.00 will be rejected unless Volvo Action Service is contacted.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
April 2016
Page 2 of 2
875001
US & CANADA VOLVO ENGINE EQUIPPED VEHICLE
EMISSIONS COMPONENTS COVERAGE 60 MONTHS/100K
MILES
Affects:
Related:
Updated:
VN, VHD
April 5, 2016
Note: PDF files are not official documents and serve only as reference items.
STANDARD EMISSIONS COMPONENT WARRANTY COVERAGE
CERTIFICATE
(EPA 2014)
STANDARD EMISSIONS COMPONENT WARRANTY COVERAGE
CERTIFICATE
(EPA 2017)
Page 1 of 7
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
STANDARD EMISSIONS COMPONENT
WARRANTY CERTIFICATE (EPA 2014)
Volvo Group North America LLC, d/b/a Volvo Trucks North America, warrants certain individual components of each new Volvo D11,
D13 and D16 EPA 2014 emission engine in a new Volvo truck to be free from defects in material and workmanship under normal use
and service up to the periods specified, provided all Volvo Trucks North America maintenance and inspection requirements are followed.
See your local authorized Volvo Trucks dealer for recommended maintenance and inspection procedures. All warranty periods are
calculated from the date in service of the vehicle. All coverage is 100% for parts and labor subject to the qualifications, limitations and
exclusions as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE FOLLOWING PAGES OF THIS CERTIFICATE.
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to new Volvo D11, D13, and D16 engines meeting EPA 2014 emission requirements in new Volvo trucks operated
in the United States and Canada and placed in service on or after January 1, 2014. Volvo Trucks North America reserves the right to
make any changes in design, or make additions to or upon its products, without incurring any obligations to install the same changes on
vehicles previously built.
Emissions Components Coverage: 60 months, or 100,000 miles (160,934 kilometers), whichever occurs first.
Emission Control System Warranty
Engine emission controls manufactured by Volvo Trucks North America are warranted to 60 months or 100,000 miles (160,934
kilometers), whichever occurs first. Vehicles sold for use in California must have the Operator’s Manual in the vehicle which contains the
California Emission System Warranty.
USE OF IMPROPER OR UNAPPROVED FUEL OR ENGINE OIL WILL VOID THE ENGINE AND AFTER TREATMENT SYSTEM
(DIESEL PARTICULATE FILTER) WARRANTIES. 2014 EPA EMISSION ENGINES REQUIRE THE USE OF EO-O PREMIUM PLUS
(OR VDS-4) SPECIFICATION HIGH PERFORMANCE DIESEL ENGINE OIL AND ULTRA LOW SULFUR DIESEL (ULSD) FUEL.
USE OF FLUIDS OTHER THAN API CERTIFIED DIESEL EXHAUST FLUID (DEF) WILL COMPROMISE AFTERTREATMENT
SYSTEM PERFORMANCE, INCREASE EMISSIONS, AND MAY IMPACT THIS TRUCKS PRODUCT WARRANTIES.
SEE FOLLOWING TABLE FOR SPECIFIC COVERAGES:
Covered Emission Components List:
60 Months or 100,000 Miles
Qualifications and Limitations
Aftertreatment Control Module (ACM)
Aftertreatment Diesel Particulate Filter (DPF) with
Aftertreatment Diesel Oxidation Catalyst (DOC)
Includes: Aftertreatment Doser, Aftertreatment Fuel Shutoff Valve,
Aftertreatment Fuel Pressure Sensor, Engine Exhaust Gas Temperature (EGT)
Sensor, Aftertreatment DPF Intake Temperature Sensor, Aftertreatment DPF
Outlet Temperature Sensor, Aftertreatment DPF Differential Pressure Sensor
Aftertreatment Wiring Harness (DPF)
Aftertreatment Wiring Harness (SCR)
Includes: Jumper to AHI Pressure Regulator, ACM Power Supply, Heater NOx
Care, DEF Tank
Charge Air Cooler (CAC)
Crankcase Breather
Excludes: Crankcase Pressure Sensor
Crankcase Separator
Crankcase Tubing & Hoses before Separator
EGR Cooler
EGR Valve and EGR Valve Control
EGR Venturi
Engine Control Module (ECM)
Engine Turbocharger Assembly
Includes: Variable Geometry Turbo (VGT) Actuator
Exhaust Gas Piping
(From Turbocharger to Aftertreatment System)
Injectors
22354432 (January 2014)
Page 1 of 3
Covered Emission Components List:
60 Months or 100,000 Miles
Instrument Cluster
Selective Catalytic Reduction (SCR)
Qualifications and Limitations
Limited to Repair of Microprocessor
Includes: Aftertreatment Selective Catalytic Reduction (SCR) Catalyst,
Aftertreatment Diesel Exhaust Fluid (DEF) Pump (Aftertreatment DEF Dosing
Absolute Pressure Sensor, Aftertreatment DEF Return Valve), Aftertreatment
DEF Dosing Valve, Aftertreatment DEF Tank, Aftertreatment DEF Tank
Heater/Sender, Aftertreatment DEF Tank Heater, Aftertreatment DEF Tank
Heater Valve, Aftertreatment DEF Tank Temperature Sensor, Aftertreatment
DEF Level Sensor, Aftertreatment DEF Heated Lines, Aftertreatment DEF
Quality Sensor
Sensor, Aftertreatment Intake NOx
Sensor, Aftertreatment Outlet NOx
Sensor, Ambient Air Temperature Sensor
Sensor, Crankshaft Position (CKP)
Sensor, Engine Coolant Temperature (ECT)
Sensor, Engine Exhaust Gas Recirculation (EGR)
Differential Pressure Sensor
Sensor, Engine Exhaust Gas Recirculation (EGR)
Temperature
Sensor, Intake Manifold Air Temperature/Pressure
GHG Covered Component
24 months or 24,000 miles (38,625 KM)
Tires
GHG Covered Components
60 months or 100,000 miles (160,934 KM)
(Only those vehicles certified as “Highway Tractors”
according to the requirements of Chapter 40 of the
Code of Federal Regulations, Part 1037
Exterior Components
Air Conditioning Components
Qualifications and Limitations
Drive and Steer Only: The first 24 months or 38,624 km (24,000 miles) of
vehicle operation, whichever occurs first, and applying only to the first set of
tires on the vehicle when delivered to the ultimate purchaser.
Subject to the terms and conditions of the tire manufacturer’s warranty,
excluding retreads.
Emissions related warranty coverage only, refer to the specific tire
manufacturer’s warranty policy for other term lengths.
Qualifications and Limitations
Limited to: Chassis Fairings, Ground Effect Extensions, Roof Deflectors, Cab
Side Deflectors, Adjustable Roof Extensions, Side Deflector Extensions,
Bumper Deflectors, A-pillar Deflectors
Limited to: A/C Compressor; A/C Condenser; A/C Pressure Switches and
Transducers; Bunk Climate Unit; Hoses (Compressor to Condenser,
Condenser to Drier, Drier to Climate Unit, Climate Unit to Compressor, Bunk
Climate Unit); Main Climate Unit; Receiver Drier, Spring Loaded, 12 cubic inch
Volvo Trucks North America reserves the right to make any changes in design or to make additions to or upon its products without
incurring any obligations to install the same on vehicles previously built.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS OR CONDITIONS,
STATUTORY OR OTHERWISE, EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
22354432 (January 2014)
Page 2 of 3
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS: Volvo Trucks North America’s obligation is limited to, at its sole option, repair or replacement of parts which are
acknowledged by it to be defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur.
The defective parts or assemblies replaced shall become the property of Volvo Trucks North America. Warranty repairs performed by the
dealer’s shop in accordance with the terms of the warranty set forth herein are free of charge. Warranty repairs do not constitute an
extension of the original warranty period for the engine or any part thereof. Warranty consideration can only be given if the deficiency is
brought to the attention of an authorized Volvo Trucks dealer upon discovery and the engine must be made available, in a timely fashion
during the coverage period, for repair.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT OR INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery
and the truck must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s unreasonable
delay in making the truck available, after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive speeds,
loading beyond the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to failure to follow
Volvo Trucks North America’s recommended service procedures are considered damages due to improper maintenance services.
PROGRESSIVE DAMAGE: Damages due to failure of operator to take reasonable precautions to mitigate damage are not covered. Damages to
covered part due to failure of non-covered part are not covered. Coverage is limited to failure of covered part directly causing failure of non-covered
part, where operator took reasonable precautions to mitigate damages.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle application
problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of vehicles being
operated in excess of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North America’s
sole judgment, its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions, or does not perform as a result of improper conversion or installation of
special bodies or equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil filters,
adjustments of the engine, injection pump, and all other adjustments, are not covered. Parts which are normally consumed or worn out during the
engine’s normal service life and customarily replaced during usual maintenance service including but not limited to filters are not covered after the
first 30 days from the in-service date.
PERFORMANCE COMPLAINTS: Performance complaints are not covered (for example, low power and poor fuel economy) unless caused by the
failure of a qualified part.
OIL CONSUMPTION: Before a claim for excessive oil consumption will be considered, the owner must provide proof that all recommended
maintenance has been performed and submit adequate documentation to show that oil consumption exceeds Volvo Trucks North America published
standards. Under no circumstances will warranty pay for excessive oil consumption after 24 months, 250,000 miles (402,000 km), or 6,250 engine
hours.
WEAROUT: Volvo Trucks North America does not cover normal wear of covered parts. Cylinder liner, piston and piston rings failures attributable to
wear are specifically excluded from this warranty. The wear rate of parts in any engine, and especially those parts within the combustion area, will
vary depending upon operating conditions and environment. Conditions, such as load, trailer configuration, road speed and road conditions, as well
as the quality of fuel, lubrication oil, and all filters bear a direct relationship to the wear rate and resulting life of parts. Depending upon the severity of
these various conditions, parts wear and resulting failure could occur within the time limit of the coverage.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units,
which do not meet factory standards and which cause a vehicle component or system to fail, are not covered.
ENGINES AND AUTOMATIC TRANSMISSIONS: The engines and Allison automatic transmissions used in Volvo trucks are warranted by their
respective manufacturers and not by Volvo Trucks North America. Refer to the engine and transmission manufacturers’ warranty statements.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual
mileage cannot be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules;
failure to do so may result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue, rental
vehicles, or driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter
elements and labor performed by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable
repair, additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks
North America factory manufacturing records will be determinative as to factory installed components.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
22354432 (January 2014)
Page 3 of 3
STANDARD EMISSIONS WARRANTY
CERTIFICATE (EPA 17)
Volvo Group North America LLC, d/b/a Volvo Trucks North America, warrants certain individual components of each new Volvo D11,
D13 and D16 EPA 17 emission engine in a new Volvo truck to be free from defects in material and workmanship under normal use
and service up to the periods specified, provided all Volvo Trucks North America maintenance and inspection requirements are
followed. See your local authorized Volvo Trucks dealer for recommended maintenance and inspection procedures. All warranty
periods are calculated from the date in service of the vehicle. All coverage is 100% for parts and labor subject to the qualifications,
limitations and exclusions as noted.
LIMITATIONS AND EXCLUSIONS TO THIS WARRANTY APPEAR ON THE FOLLOWING PAGES OF THIS CERTIFICATE.
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
This warranty applies to new Volvo D11, D13, and D16 engines meeting EPA 17 emission requirements in new Volvo trucks operated
in the United States and Canada. Volvo Trucks North America reserves the right to make any changes in design, or make additions to
or upon its products, without incurring any obligations to install the same changes on vehicles previously built.
Emissions Components Coverage: 60 months, or 100,000 miles (160 934 km), whichever first occurs.
Emission Control System Warranty
Engine emission controls manufactured by Volvo Trucks North America are warranted to 60 months or 100,000 miles (160 934 km),
whichever first occurs. Vehicles sold for use in California must have the Operator’s Manual in the vehicle which contains the
California Emission System Warranty.
USE OF IMPROPER OR UNAPPROVED FUEL OR ENGINE OIL WILL VOID THE ENGINE AND AFTERTREATMENT SYSTEM
(DIESEL PARTICULATE FILTER) WARRANTIES. VOLVO ENGINES REQUIRE THE USE OF VOLVO SPECIFICATION VDS 4.5 HIGH
PERFORMANCE DIESEL ENGINE OIL AND ULTRA LOW SULFUR DIESEL (ULSD) FUEL.
USE OF FLUIDS OTHER THAN API CERTIFIED DIESEL EXHAUST FLUID (DEF) WILL COMPROMISE AFTERTREATMENT
SYSTEM PERFORMANCE, INCREASE EMISSIONS, AND MAY IMPACT THIS TRUCK’S PRODUCT WARRANTIES.
SEE FOLLOWING TABLE FOR SPECIFIC COVERAGES:
Covered Emission Components List:
60 Months or 100,000 Miles (160 934 km)
Qualifications and Limitations
Aftertreatment Control Module (ACM)
Aftertreatment Diesel Particulate Filter (DPF) with
Aftertreatment Diesel Oxidation Catalyst (DOC)
Includes: Aftertreatment Doser, Aftertreament Doser Module (Aftertreatment Fuel Shutoff
Valve, Aftertreatment Fuel Pressure Sensor), Engine Exhaust Gas Temperature (EGT)
Sensor, Aftertreatment DPF Intake Temperature Sensor, Aftertreatment DPF Outlet
Temperature Sensor, Aftertreatment DPF Differential Pressure Sensor
Aftertreatment Wiring Harness (DPF)
Aftertreatment Wiring Harness (SCR)
Includes: Jumper to AHI Pressure Regulator, ACM Power Supply, Heater NOx Care,
DEF Tank
Charge Air Cooler (CAC)
Crankcase Breather
Excludes: Crankcase Pressure Sensor
Crankcase Separator
Crankcase Tubing & Hoses before Separator
EGR Cooler
EGR Valve and EGR Valve Control
EGR Venturi
Engine Turbocharger Assembly
For the failure to be covered under Emissions Components, the failure must effect the
emissions of the unit.
Includes: Variable Geometry Turbo (VGT) Actuator
Exhaust Gas Piping
From Turbocharger to Aftertreatment System
Engine Electronic Control Unit (EECU)
Injectors
April 2016
Page 1 of 3
Covered Emission Components List:
60 Months or 100,000 Miles (160 934 km)
Instrument Cluster
Selective Catalytic Reduction (SCR)
Qualifications and Limitations
Limited to Repair of Microprocessor, MIL, Real Time Clock, DEF Gauge, DEF Lamp
Includes: Aftertreatment Selective Catalytic Reduction (SCR) Catalyst, Aftertreatment
Diesel Exhaust Fluid (DEF) Pump (Aftertreatment DEF Dosing Absolute Pressure Sensor,
Aftertreatment DEF Return Valve), Aftertreatment DEF Dosing Valve, Aftertreatment DEF
Tank, Aftertreatment DEF Tank Heater/Sender, Aftertreatment DEF Tank Heater,
Aftertreatment DEF Tank Heater Valve, Aftertreatment DEF Tank Temperature Sensor,
Aftertreatment DEF Level Sensor, Aftertreatment DEF Heated Lines, Aftertreatment DEF
Quality Sensor
Sensor, Aftertreatment Intake NOx
Sensor, Aftertreatment Outlet NOx
Sensor, Ambient Air Temperature Sensor
Sensor, Crankshaft Position (CKP)
Sensor, Engine Coolant Temperature (ECT)
Sensor, Engine Exhaust Gas Recirculation (EGR) Differential
Pressure Sensor
Sensor, Engine Exhaust Gas Recirculation (EGR) Temperature
Sensor, Intake Manifold Air Temperature/Pressure
Sensor, Particulate Matter (PM)
GHG Covered Component
24 months or 24,000 miles (38 624 km)
Qualifications and Limitations
Drive and Steer Only: The first 24 months or 24,000 miles (38 624 km) of vehicle
operation, whichever occurs first, and applying only to the first set of tires on the vehicle
when delivered to the ultimate purchaser.
Subject to the terms and conditions of the tire manufacturer’s warranty, excluding
retreads.
Emissions related warranty coverage only, refer to the specific tire manufacturer’s
warranty policy for other term lengths.
Tires
GHG Covered Components
60 months or 100,000 miles (160 934 km)
(Only those vehicles certified as “Highway Tractors” according
to the requirements of Chapter 40 of the Code of Federal
Regulations, Part 1037
Exterior Components
Air Conditioning Components
Qualifications and Limitations
Limited to: Chassis Fairings, Ground Effect Extensions, Roof Deflectors, Cab Side
Deflectors, Adjustable Roof Extensions, Side Deflector Extensions, Bumper Deflectors,
A-pillar Deflectors
Limited to: A/C Compressor; A/C Condenser; A/C Pressure Switches and Transducers;
Bunk Climate Unit; Hoses (Compressor to Condenser, Condenser to Drier, Drier to
Climate Unit, Climate Unit to Compressor, Bunk Climate Unit); Main Climate Unit;
Receiver Drier
Volvo Trucks North America reserves the right to make any changes in design or to make additions to or upon its products without
incurring any obligations to install the same on vehicles previously built.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES AND REPRESENTATIONS OR CONDITIONS,
STATUTORY OR OTHERWISE, EXPRESSED OR IMPLIED INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
April 2016
Page 2 of 3
THESE LIMITATIONS AND EXCLUSIONS ARE IMPORTANT AND MUST BE READ AND UNDERSTOOD.
LIMITATIONS: Volvo Trucks North America’s obligation is limited to, at its sole option, repair or replacement of parts which are
acknowledged by it to be defective. In the case of acknowledged defective assemblies, exchange with factory rebuilt units may occur.
The defective parts or assemblies replaced shall become the property of Volvo Trucks North America. Warranty repairs performed by
the dealer’s shop in accordance with the terms of the warranty set forth herein are free of charge. Warranty repairs do not constitute
an extension of the original warranty period for the engine or any part thereof. Warranty consideration can only be given if the
deficiency is brought to the attention of an authorized Volvo Trucks dealer upon discovery and the engine must be made available, in
a timely fashion during the coverage period, for repair.
NO PAYMENT OR OTHER COMPENSATION WILL BE MADE FOR CONSEQUENTIAL,
INDIRECT OR INCIDENTAL EXPENSES OR DAMAGES OF ANY KIND.
EXCLUSIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
REPAIR: Warranty consideration can only be given if the deficiency is brought to the attention of an authorized Volvo Trucks dealer upon
discovery and the truck must be made available, in a timely fashion during the warranty period, for repair. Failures resulting from the user’s
unreasonable delay in making the truck available, after being notified of a potential product problem, are not covered.
DAMAGES: Damages due to accidents, misuse, negligence, improper operations, alterations, storage or transport, operation at excessive
speeds, loading beyond the factory rated load capacity, and improper or insufficient maintenance services are not covered. Damages due to
failure to follow Volvo Trucks North America’s recommended service procedures are considered damages due to improper maintenance services.
PROGRESSIVE DAMAGE: Damages due to failure of operator to take reasonable precautions to mitigate damage are not covered. Damages to
covered part due to failure of non-covered part are not covered. Coverage is limited to failure of covered part directly causing failure of noncovered part, where operator took reasonable precautions to mitigate damages.
APPLICATION: The selling dealer is responsible for the correct application and/or specification for a vehicle sold to a customer. Vehicle
application problems, including but not limited to, replacement of incorrect axle or transmission gear ratios, failures of component parts of
vehicles being operated in excess of factory rated load capacities, or the use of a vehicle for a purpose of which it was not intended are not
covered.
ALTERATIONS: Any vehicle or vehicle system repaired, altered, or inspected in any way, so as to adversely affect, in Volvo Trucks North
America’s sole judgment, its stability, durability, or reliability, is not covered.
OPTIONAL EQUIPMENT: Any part of the truck that fails, malfunctions, or does not perform as a result of improper conversion or installation of
special bodies or equipment by other manufacturers or suppliers is not covered.
MAINTENANCE AND PARTS CONSUMED (“Consumables”): Normal maintenance services including, but not limited to, replacement of oil
filters, adjustments of the engine, injection pump, and all other adjustments, are not covered. Parts which are normally consumed or worn out
during the engine’s normal service life and customarily replaced during usual maintenance service including but not limited to filters are not
covered after the first 30 days from the in-service date.
PERFORMANCE COMPLAINTS: Performance complaints are not covered (for example, low power and poor fuel economy) unless caused by the
failure of a qualified part.
OIL CONSUMPTION: Before a claim for excessive oil consumption will be considered, the owner must provide proof that all recommended
maintenance has been performed and submit adequate documentation to show that oil consumption exceeds Volvo Trucks North America
published standards. Under no circumstances will warranty pay for excessive oil consumption after 24 months or 250,000 miles (402 336 km).
WEAROUT: Volvo Trucks North America does not cover normal wear of covered parts. Cylinder liner, piston and piston rings failures attributable
to wear are specifically excluded from this warranty. The wear rate of parts in any engine, and especially those parts within the combustion area,
will vary depending upon operating conditions and environment. Conditions, such as load, trailer configuration, road speed and road conditions,
as well as the quality of fuel, lubrication oil, and all filters bear a direct relationship to the wear rate and resulting life of parts. Depending upon the
severity of these various conditions, parts wear and resulting failure could occur within the time limit of the coverage.
NON-GENUINE PARTS: Any vehicle which has been repaired by use of parts and accessories, as well as major assemblies and exchange units,
which do not meet factory standards and which cause a vehicle component or system to fail, are not covered.
ENGINES AND AUTOMATIC TRANSMISSIONS: The engines and Allison automatic transmissions used in Volvo trucks are warranted by their
respective manufacturers and not by Volvo Trucks North America. Refer to the engine and transmission manufacturers’ warranty statements.
ODOMETER READING: Any vehicle in which the odometer has been disconnected or the mileage reading has been altered and/or the actual
mileage cannot be readily determined is not covered.
ACCESS TO INFORMATION: The user must allow Volvo Trucks North America full access to all data stored in all Electronic Control Modules;
failure to do so may result in the loss of warranty coverage.
PREMIUM LABOR: Labor for overtime and/or shift differential is not covered.
EXCESSIVE LABOR: Excessive labor for a warrantable repair due to the prior installation of equipment or body is not covered.
MISC. EXPENSE: Meals, lodging, electronic messaging equipment, travel time and expense, loss of cargo, downtime, loss of profit/revenue,
rental vehicles, or driver’s wages and other miscellaneous expenses are not covered. Shop supplies, lube oil, lubricants, sealers, anti-freeze, filter
elements and labor performed by a non-approved location are not covered.
ADDITIONAL COMPONENTS: Components or parts that are not installed by Volvo Trucks North America are not covered. During a warrantable
repair, additional time to remove any customer installed bodies, components, and accessories will not be covered under warranty. Volvo Trucks
North America factory manufacturing records will be determinative as to factory installed components.
Volvo Trucks North America
(A Division of Volvo Group North America LLC)
Post Office Box 26115
Greensboro, North Carolina 27402-6115
April 2016
Page 3 of 3
874900
Base Volvo Engine Towing Coverage, 24 Months / 250,000
Miles
Affects:
Related:
Updated:
VN, VHD
April 4, 2016
Note: PDF files are not official documents and serve only as reference items.
Base towing is included in the Standard Engine Warranty.
Refer to the Standard Engine Warranty Certificate for coverage details.
Page 1 of 1
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
004645
VHD64FT200
Affects:
Related:
Updated:
VHD
Vehicle Adaptation
October 31, 2005
The VHD64FT200 is a full-featured daycab
with axle-forward configuration, ideal for local
on/off-highway applications where
performance is required and comfort is
appreciated.
The quiet and comfort of the cab is
recognized throughout the industry, and
double door seals help keep out dust and dirt
from the job site.
Volvo’s state-of-the-art cab construction
incorporates galvanized high-strength steel
that is welded, not riveted. This means a
stronger body free of rivet bumps that can
rust, shake loose, and add wind resistance.
VHD64FT200: 6x4 Tractor with aerodynamic medium hood; Standard
Daycab, 113.6" BBC Axle Forward
Standard Features Include:
• One-Piece Roped-In Windshield
• Cab Air Filter
• Solar-Managed Windshield Glass
• Suspension Dump Valve
• Sloped Side Windows
• Wide Door Opening
• Tilt/telescoping Steering Column
• Recessed Door Handles
• Interior Hood Release
• Interior Grab Handles
• Cab Air Suspension
• Offset, Self-Cleaning Steps
• 3-point Retractable Safety Belts
• Suspended Pedals
• Side Window Defroster
• EPDM Coolant and Heater Hoses
Page 1 of 4
© 2011 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
004645
VHD64FT200
Updated:
October 31, 2005
One-Piece Roped-In Windshield
Volvo trucks feature as standard equipment a large, 1-piece windshield for maximum
visibility. This 2100 sq-in windshield offers panoramic visibility for the driver, and
eliminates the traditional center post obstruction found in 2-piece windshields.
This windshield is designed for quick replacement, as it is “roped” in using a specialized
rubber molding and NOT glued in. That means the cab does not rely on the windshield for
structural integrity. This also reduces risk of cracks due to cab flex and permits the
windshield to be kicked out as an emergency exit.
This “roped in” windshield offers serviceability advantages, as it takes about 2 hours to
replace the windshield … instead of the 6 hours required for glued or bonded windshields.
The windshield can also be replaced outdoors (even in inclement weather), while bonded
windshields often require a warm and dry environment for proper adhesion (and curing) of
the glue.
Grooves molded into the window seal also are designed to divert rain water up and over
the cab roof and away from the side windows, further aiding visibility.
Solar-Managed Windshield Glass
Standard on all Volvo trucks is solar-managed windshield glass, which reduces UV
penetration into the cab. This helps reduce heat in the cab and sleeper by several degrees
on a sunny day, compared to standard glass.
Sloped Side Windows
Volvo further optimizes visibility with sloped driver and passenger windows. This optimizes
side-to-side visibility.
Tilt/Telescoping Steering Column
Volvo’s steering column offers the flexibility of tilt and telescoping adjustment to optimize
driving comfort and reduce driver fatigue. The steering column can be adjusted to a wide
range of positions when the foot pedal (highlighted) is pressed to the floor. This allows
both hands to be used in pulling the steering wheel to the most comfortable position. The
foot pedal also prevents accidental adjustment of the steering column while driving.
With a tilt of 0 – 30° and telescoping travel of up to 4.5 inches, the steering wheel and
column can be adjusted to adapt to most drivers, regardless of height or seat position.
Interior Hood Release
The hood release is located inside the cab on the steering column. This prevents
unauthorized access to the engine compartment. However, it also allows the hood to be
released while standing on the ground.
Cab Air Suspension
Volvo uses an advanced suspension technology to make the ride smoother and quieter in
the cab. This innovative suspension uses outboard airbags and vertical shocks to dampen
movement and isolate vibration from the suspension. A panhard rod also dampens lateral
movement. The result is a very comfortable ride without excessive cab sway.
3-Point Retractable Safety Belts
As inventor of the 3-point safety belt, Volvo was also the first in the world to make this safety innovation standard in Class 8 vehicles.
The 3-point retractable safety belt is designed to keep drivers and passenger secure and optimizes the effectiveness of the driver-side
airbag.
Page 2 of 4
© 2011 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
004645
VHD64FT200
Updated:
October 31, 2005
Side Window Defroster
The driver- and passenger-side doors on the VN feature a unique vent, which
provides a curtain of air against the side windows. This is designed to keep the
windows clear from moisture and fogging, but also provides additional air movement
and comfort for the driver.
Cab Air Filter
Clean air is critical to a healthy working environment. The VN is designed to allow air
into the cab only through a high-efficiency air filter mounted in the engine
compartment. This filter, with Volvo’s electronic climate control, can completely
refresh cab air within minutes.
Air is exhausted from the cab through one-way valves in the doors. This is
designed to prevent moisture, pollen, or other contaminants from entering the cab
and sleeper.
Suspension Dump Valve
This control valve is standard with Volvo Air Suspension, and allows the rear
suspension air bags to be “dumped.” This lowers the suspension and allows the
tractor to drive out from under a docked trailer.
Wide Door Opening
The VN offers the widest door opening in the industry and is designed to provide safe
and easy entry and exit. Doors open 60°, for an opening of 37 inches.
Recessed Door Handles
The door handles on the VN are recessed to minimize wind resistance. They
are also ergonomically designed for ease in opening the door.
Interior Grab Handles
To assist with safe entry and exit in any weather conditions, the grab handles of the
VN are mounted inside the cab. Grab handles are mounted at the front and rear of
the door opening.
Page 3 of 4
© 2011 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
004645
VHD64FT200
Updated:
October 31, 2005
Offset, Self-Cleaning Steps
The steps on the VN are offset for safer entry and exit. Their position, in conjunction
with the recessed cab floor design, allows them to be easily seen from the driver’s
seat. Their self-cleaning design works to keep them clear of mud and snow.
Suspended Pedals
The automotive-style pedals on the VN are suspended to provide a more comfortable
and natural foot position while driving. They also are designed to minimize potential
injury to feet and ankles in a crash since they are not fastened to the floor; they are
designed to push up and out of the way in an impact.
EPDM Coolant and Heater Hoses
Volvo’s high-performance EPDM (ethylene propylene) rubber coolant and heater hoses give customers
performance equal to silicone in heavy-duty truck applications, without silicone’s sensitivity to cuts or additional
clamping requirements. Volvo’s EPDM hoses also avoid the initial expense and maintenance requirements of
silicone.
*Volvo’s Technical Regulation
Volvo’s EPDM hose is the only EPDM hose that meets Volvo’s technical
20450330 requires both silicone and
standards.* Engineering tests document that Volvo’s EPDM hose performs
EPDM to pass the same demanding
just as well as Volvo’s silicone hose in extreme cold weather operating
performance criteria. While Volvo’s
conditions, and resists the effects of oil, mud, salt, acids, and ozone. It also
EPDM product passes this standard,
other manufacturers do not.
exceeds SAE J20 – the industry standard – especially in four key areas:
1. Cold Weather
o
Effective operating temperature range is comparable to silicone for the heavy-duty vehicles: from -40 F to
o
+275 F (-40°C to +135°C). Volvo’s EPDM is the same hose manufactured and used in Scandinavia’s extremely
cold climate. It is designed to withstand:
 extreme cold and hot operating environments
 high under-hood and coolant temperatures
2. Clamping
EPDM provides better clamping to stems and connectors than silicone.
 superior sealability
 greatly reduces the risk of cold coolant leaks
Note: At present, engine-specific
coolant hoses that are in close
proximity to extremely hot components
(i.e. turbocharger) will continue to be
silicone hoses.
3. Water Permeation
Volvo’s EPDM hose allows 90% less permeation of water molecules through the hose wall compared to silicone.
Lower water permeation helps vehicles maintain the ideal 50:50 coolant concentration.
4. Durability
Volvo’s EPDM hose offers greater tensile strength and durability than silicone. This provides:
 extended use with less cracking or hardening
 greater resistance to cuts and cover abrasion
 reduced compression of the hose at clamping (a leading cause of hose failure)
 resistance to electromechanical degradation
Page 4 of 4
© 2011 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
1017T4
Volvo D13-455 HP 1800RPM 1550-1750 lb-ft Dual-Torque
EPA’10 Emission Level
Affects:
Related:
VN, VAH
Engine Equipment
Transmission
Rear Axle
December 3, 2014
Updated:
Features: 455 hp and 1550-1750 lb-ft Dual-Torque Reduced Governor Cut in @ 1800RPM
The new Volvo Dual-Torque ratings, such as 1017T4, are engines with special emphasis on fuel economy. Each
rating has a higher torque curve, and a lower torque curve, with the nominal horsepower for each rating
associated with the higher torque curve. With Dual-Torque, the truck accelerates through all bottom gears in the
lower torque curve. In the top two gears, the higher torque curve is available on demand under certain conditions.
But, by operating on the lower curve through all the lower gears, certain vendor transmissions can be used with a
100 or 200 lb-ft lower rating than maximum torque. However, at resale time, the engine can not be uprated
beyond the rating of the transmission. The Dual-Torque ratings will also have inferior driveability in mountainous
terrain, as compared to Eco-Torque engines.
Additional Information on Dual-Torque
The Volvo D13 engine is an in-line six cylinder design with a displacement of 12.8 liters,
and ratings of 375 to 500 HP, with 1450 to 1750 lb-ft of torque. This puts it right in the
sweet spot for distribution, LTL, truckload, linehaul freight and vocational applications,
while its weight - 2676 lbs- gives it a great ratio of power to weight.
The Volvo D13, derived from the popular D12, is currently the most popular engine
above 10L in the world. Complete engine assembly and manufacture of the D13
crankshafts and camshafts are completed at Volvo Powertrain’s Hagerstown, Maryland
plant. The D13 will be available in Volvo VNM, VNL, VHD, and VAH models.
The D13 engine is fully compliant with the EPA’14 Green House Gas (GHG) emission standards, while still
delivering outstanding fuel economy, reliability, durability and serviceability. Volvo 2014 engines offer 100%
“Passive Regeneration” of the diesel particulate filter (DPF). Volvo trucks equipped with Selective Catalytic
Reduction (SCR) emissions control systems for EPA’10 will not undergo driving or parked active regeneration of
the DPF during normal operating conditions. With the implementation of EPA’10 technology, Volvo engines have
reduced diesel engine pollutants by 99% from original measured levels and produce Near Zero Emissions.
New Design Features:
Carryover Design Features:
2014 GHG Improvements provide a 1%
increase in fuel economy utilizing low friction
cylinder improvements along with optimizing
fuel delivery. New 2-piece valve cover decreases
replacement time making process easier and
cleaner.
Modified Design Features:

100% “Passive Regeneration” of DPF
D13 Engine Spec Sheet














Ultra High Fuel Injection Pressure
Precision-Flow Cooled EGR System
Rear-Mounted Camshaft Damper
Single-piece Rigid Deck Cylinder Head
Steel Cylinder Head Gasket
Steel “Ladder” Reinforcement
Volvo Engine Brake (I-VEB)
Volvo Vectro EMS
Full Flow Oil Filtration
Bypass Oil Filter
Low-Return-Flow Fuel System
Engine Mounted Primary Fuel Filter (optional)
Selective Catalytic Reduction (SCR)
Diesel Exhaust Fluid (DEF)
Page 1 of 6
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
1017T4
Updated:
Volvo D13-455 HP 1800RPM 1550-1750 lb-ft Dual-Torque
EPA’10 Emission Level
December 3, 2014
....additional on Dual-Torque
On a steep grade, performance is enhanced when the engine automatically switches to the higher power and
torque curve. Under this full-load, low-rpm condition, the engine runs at maximum efficiency but will revert to the
low curve when the power demand is removed and cruise conditions are resumed. This saves fuel by
encouraging operation under load at a lower more efficient rpm and makes an engine spec that is capable of
cresting hills in the top gear. The driver soon learns that this exceptional performance is obtained by operating at
low engine rpm.
The below example of a D13-425 hp 1450-1750 lb-ft engine paired with a 10 speed manual transmission
illustrates how the Dual-Torque feature works. The truck is cruising at the Eco-Cruise set speed of 62 mph on the
lower torque curve of 1450 lb-ft with a Brake Cruise setting of +5 mph. The first “Minor Hill” encountered is not
large enough and conditions are not meet to trigger the change to the higher torque curve as the truck ascends
the grade with minimum speed loss. The vehicle then rolls-out down the hill to approximately 67 mph and starts to
ascend a “Larger Hill”. There is a higher torque demand on this Larger Hill, but the truck climbs the hill again
without the need for the higher torque curve. The truck then rolls-out again down the next hill to approximately 65
mph and begins to start up a “Long, Steep Hill”. The engine is now under a full-load, low-rpm condition and
th
switches to the higher 1750 lb-ft torque curve, allowing the vehicle to ascend the grade, remaining in 10 gear.
After the last hill, the road grade flattens out and the torque demand drops off, allowing the engine to revert back
to the lower torque curve to maximize fuel economy.
Page 2 of 6
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
1017T4
Updated:
Volvo D13-455 HP 1800RPM 1550-1750 lb-ft Dual-Torque
EPA’10 Emission Level
December 3, 2014
Volvo EPA’14 engines maintain EPA‘10’s 100% “Passive Regeneration” of the DPF.
Passive Regeneration, also known as NO2-Based Regeneration, occurs at 500 degrees F., a lower temperature
than Active Regeneration, which occurs at 1100 degrees F.
Active Regeneration, or O2-Based Regeneration, uses high temperature to simply oxidize the soot out of the
filter. The high temperature comes from ‘dosing’, or adding fuel through the 7th injector, located on the outlet
housing of the turbocharger. This increases fuel consumption. This fuel oxidizes in the catalyst of the DPF where it
raises the heat to the 1100 degrees required to oxidize the soot.
th
The 2014 engines will maintain a 7 injector. It will be used on all models to aid in warm-up of the emission control
system on a cold start-up. It will also be there in the extra-normal situation should a regeneration assist ever be
needed, for example due to ‘extremely severe’ weather conditions.
A key enabler of Passive Regeneration is the correct NOx to soot ratio. This is critical. Volvo gets the correct NOx
to soot ratio by using the low soot of the Volvo engine together with a higher NOx engine-out level. The increased
NOx comes from a lower rate of EGR.
It has been shown with our test trucks, including some that have operated through two winters in stop-and-go urban
delivery in hilly terrain (an arduous duty cycle), that none have yet experienced a single active regeneration in
normal on-highway operation.
Advantages of No Active Regeneration:
No dash lights come on
No interruptions of PTO activity
No special driver training or familiarization
Higher productivity
Much lower system temperatures
Reduced consumption of fuel
Reduced thermal cycling
Lower operating expenses
No limitations on where the driver can go
The net result is a truck meeting the EPA’14 regulation with better fuel efficiency and near-zero NOx.
Carryover Design Features:
The following features, introduced in 2007, will be carried over intact into 2014.


Ultra High Fuel Injection Pressure – the design target for maximum fuel injection system pressures had
been raised 20% from 29,000 psi to 35,000 psi, for improved combustion and lower emissions. The
successful dual-solenoid fuel injector used first with the US’02 D12D has been enhanced with
proprietary actuation strategy.
Precision-Flow Cooled EGR System uses three state-of-the-art components to provide exactly the right
amount of EGR with fast response.
 Sliding nozzle variable geometry turbocharger with electronic actuation –– to
responsively provide the needed EGR pressure.
 Poppet-style hydraulic EGR valve – to accurately provide the needed EGR flow.
 Delta-pressure flow sensor – to provide precise measurement of the EGR flow and
integrate the signals back to the turbo actuator and EGR valve through a closed-loop
electronic management system.
These three system components, first introduced together in 2005 on the Volvo D16, combine to provide
exceptional fuel economy and improved engine response.
Page 3 of 6
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
1017T4
Updated:

Volvo D13-455 HP 1800RPM 1550-1750 lb-ft Dual-Torque
EPA’10 Emission Level
December 3, 2014
Rear-Mounted Camshaft Damper – the torsional vibration damper and associated helical gear drive of
the previous Volvo D12 overhead camshaft had been moved to the rear. This focuses the higher torsional
activity from the fuel injection system directly into the component with the most inertial mass, the flywheel,
in order to reduce high frequency displacement and increase reliability of external engine components.
Other Carryover design features include:









Single-piece rigid deck cylinder head with thirty-eight cylinder head fasteners. Like the block, the head
is cast with proprietary technology in Volvo’s own foundry in Skovde, Sweden.
Steel cylinder head gasket for withstanding high combustion pressures.
Steel “ladder” reinforcement to increase stiffness of main-bearing area for today’s combustion
pressures.
Volvo Engine Brake (I-VEB) - Intelligent, integrated compression brake engine retarder, with high
retardation over the speed range. The engine brake software features a control stalk on the steering
column that integrates the I-VEB with the service brakes and the I-Shift transmission with the following
control functions:
o O – Off
o A – Automatic. ‘Brake Blending’ applies engine brake at 50% when brake pedal applied.
o 1 – 40% engine braking
o 2 – 70% engine braking
o 3 – 100% engine braking
o B – I-Shift transmission in maximum engine braking mode (when so equipped)
Volvo Vectro EMS engine electronics with enhanced diagnostics.
Full flow oil filtration with deep-flow canisters ensuring full media usage.
Bypass oil filter uses 5-micron filter to remove fine particles.
Low-return-flow fuel system cools fuel in the engine, not the fuel tank, providing consistent fuel
temperature to the injectors regardless of extreme summer heat or frigid winter cold.
Available engine mounted primary fuel filter with in-cab water-in-fuel warning indicator.
Page 4 of 6
© 2014 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
Volvo D13
455 Eco & Dual
1750 / 1550
SPECIFICATIONS
Ratings:
Base Engine Configuration
All Volvo 2014 engines fully comply with the latest
EPA mandates. This means all regulated pollutants
have been reduced by 99% from untreated levels. Yet
Volvo meets these demands with outstanding reliability
and fuel economy. This is because we use a Selective
Catalytic Reduction (SCR) system designed for the
highest efficiency. Which allowed us to pursue a passive
regeneration concept that uses NOx in place of diesel
fuel to regenerate the soot, further
reducing your cost of operation.
SCR Selective Catalytic Reduction
Aspiration
Sliding Nozzle Variable Geometry
Turbocharger
Cam / Valve Configuration
Cylinder Head
Injection System
2500
300
2100
200
1700
100
1300
0
-100
700
900
1100
1300
1500
1700
1900
Volvo VECTRO
Rating Uprateability
Full Dress Dry Weight, lb. (kg)
Fuel Specification
Fuel Filters
500
Total Lube Oil Capacity, qts. (L)
Engine Speed (RPM)
Software Only, Throughout Range
780 (12.8)
16.0:1
5.16 x 6.22 (131 x 158)
6.61 (168)
2676 (1214)
Fuel and Lubrication:
900
2100
Dual Solenoid Electronic Unit Injection
Electronic Management System
Cylinder Spacing, in. (mm)
Torque (LB-Ft)
Power (HP)
400
One Piece Rigid Deck Cylinder Head
35,000 (2,400)
Bore & Stroke, in. (mm)
2900
SOHC / 4 Valves per Cylinder
Fuel Injection Pressure, psi (bar)
Compression Ratio
Volvo D13 455VE/1750-1550 ECO/Dual
4 cycle / Inline Six
Emissions
Displacement, cu. in. (L)
500
Power: 455 HP
Torque: 1550-1750 lb-ft
Oil Filtration
Oil Drain Interval, Normal Service, miles (km)
Oil Specification
Ultra Low Sulfur Diesel, 15 ppm
Primary plus Secondary
38 (36)
Two Full Flow, One Bypass
35,000 (56,000)
Volvo VDS-4, SAE 10W-30
Advertised Power, HP
Peak Power, HP
455
455
Peak Torque, [email protected]
[email protected]
Governed rpm
Recommended cruise speed range, rpm
1800
1200-1500
Engine Brake Rating at 2200 rpm
500 hp @ 2200 rpm
Start engagement torque, [email protected]
[email protected]
Engine Brake Rating at 1500 rpm
350 hp @ 1500 rpm
FLOCS Oil Drain Kit
Optional
Engine Equipment:
Air Compressor, CFM
Retarder
Engine Brake Weight, lbs. (kg)
Two Cylinder, 31.8
I-VEB Volvo Engine Brake
25 (12)
Torque in all gears but top two, lb-ft
Default torque in top two gears, lb-ft
1750
1550
PTO Port for Live Rear PTO Pump or Shaft
Standard
On demand torque in top two gears, lb-ft
1750
Preheater, Electrical
Optional
455 Eco & Dual
1750 / 1550
high-efficiency aftertreatment system
FEATURE
BENEFIT
“No-Regen” DPF strategy, regenerating soot
with only Passive (NO2-based) Regeneration; no 7th injector fueling for regeneration
Eliminates Active (oxygen-based) DPF
Regenerations and the diesel fuel usage
they require, for lower cost of operation
Available “Early Upshift” software
encourages progressive shifting
Lower total engine revs; better fuel
economy
Available I-VEB engine brake­—strongest in
class engine brake at cruise rpm
Exceptional retardation at the rpm you drive
Volvo D11, D13, D16 share common design
philosophies throughout the family
More thorough component development
assures better design and evaluation
Eight headbolts around each piston; four
bolts on each connecting rod
Higher number of bolts assures more even
clamping and greater clamping force for
longer design life
Ultra-high 35,000 psi fuel injection pressure
Finer fuel atomization for cleaner burn,
reduced emissions and better fuel economy
Damper on camshaft
Reduced injection system generated
torsional vibration and high frequency
“buzz,” for longer component life
Precision-Flow Cooled Exhaust Gas
Recirculation with Delta-P sensor for
accurate EGR measurement
Together with accurate turbocharger and
EGR valve, this closed-loop system is tuned
to give just the EGR flow needed, no more,
no less, for optimum fuel consumption
Volvo’s 2014 engines include high-efficiency
aftertreatment systems that save you fuel and
reduce maintenance.
For example, our SCR catalyst has a full 40˝ between
the point of introduction of the Diesel Exhaust Fluid
and where it meets the catalyst. This allows for the
DEF to fully and completely convert to ammonia.
More importantly, our SCR catalyst has three bricks
where others have two. This added capacity allows
a greater catalyst efficiency, which enables our
No-Regen strategy. We can adjust the EGR flow
rate down while still eliminating all of the NOx in the
catalyst. This allows us to deliver better fuel economy.
D13 drivetrain recommendations
It is critical to specify the truck properly to achieve
maximum fuel economy and performance.
volvo eco-torque and dual-torque ratings
Volvo’s new Eco-Torque feature provides a new twist on encouraging fuel-economy driving.
By switching to a lower torque curve in the top two gears, but allowing the higher torque curve
during lug-back, Eco-Torque encourages low-rpm driving and provides a lower power level in nondemanding situations. But when conditions demand high torque at low rpm, the engine torque
will switch up to the higher curve, in many cases allowing the hill to be topped in the highest gear.
Dual-Torque ratings have a similar dual personality, but serve a special purpose. They take
advantage of several vendor transmissions that will allow a higher torque in the top two gears.
This means that they must operate in their lower torque in the low gears.
Maximum Fuel
Economy
Maximum
Performance
Maximum
Driveability
Use of
Lower Rated
Transmissions
Maximum
Uprateability
Base Ratings
✗
✓
✓
✗
✓
Eco-Torque
Ratings
✓
✗
✓
✗
✓
Dual-Torque
Ratings
✓
✗
✗
✓
✗
Volvo Trucks North America
PO Box 26115
Greensboro, NC 27402-6115
Volvo Trucks Canada
2100 Derry Road West, Suite 410
Mississauga, Ontario L5N 0B3
www.volvotrucks.us.com
©2013 Volvo Group North America, LLC
Ask your salesman to help you choose a rear axle
ratio appropriate for your expected cruising speed
and gross combination weight.
Volvo 2014 engines have been designed to achieve
maximum fuel economy by cruising at low engine
rpm. In D13 line haul specifications, the target is
1375 rpm at 65 mph.
For example, with 80K lbs GCW, 1650 lbs-ft torque,
295/75R22.5 drive tires and 0.74 top gear ratio,
the 3.36:1 axle ratio would come closest to the
1375 rpm at 65 mph recommendation.
With 0.78 ratio transmission, you should use a
3.21:1 ratio for the same rpm at 65.
Never specify an EPA ’10 Volvo engine for a cruise
speed above 1600 rpm.
270744
Eaton Fuller® RTLO-18913A, 13 Speed (RWXLCX)
Affects:
Related:
VN, VHD
Engine Package (101)
Clutch (250)
Rear Axle Ratio (TAX)
March 17, 2010
Updated:
The Low-Inertia™ Super 13
Versatility and low shift effort in a premium Fuller® transmission.
Low-Inertia Concept:
Innovative, patented design is indentified in the Eaton Fuller nomenclature by the
letter “L” (as in RTLO-18913A).
These transmissions feature a simple mainshaft which is not splined to the auxiliary
gear. This unique design eliminates the added mass, drag and inertia of the entire
auxiliary section.
During upshifts, where both the lever and splitter button are moved together, the lowinertia mainshaft is quick brought into sync, resulting in fast easy, shifts.
Features:
• “Super 13” features patented low-inertia design concept that makes shifting smoother,
faster and easier than ever before.
• Ratio flexibility with 16.9 to 1 overall reduction.
• Gathered gear ratios in hi-range provide potential fuel savings by helping keep engine
RPM’s low to remain in the engine’s optimum fuel efficiency band.
• Simplified shifting with preselect on all button shifts.
• Faster, smoother range and splitter shifts and improved cold weather performance due
to design improvements.
• Quieter operation and increased durability with helical gears in auxiliary section.
• 0.73 and 0.86 overdrives for optimum cruise RPM’s.
13-Speed Shift Pattern:
Specifications
Capacity
Weight*
Length**
Speeds
RTLO-18913A
1850 lb-ft (2508 Nm)
716 lbs. (324 kg)
33.1 in. (841 mm)
13 forward, 2 reverse
* Less clutch housing, lubricant and end yoke
**Lengths listed are from face of clutch housing to front bottoming surface of companion flange or yoke
Ratios and Steps:
REVERSE
Model
Overall
LL
H
L
H
RTLO-18913A
16.86
13.22 3.50
L
%
1
17%
%
2
%
3
%
4
%
5
1.95
%
6
1.38
%
7
%
1.00
21
18
17
Splitter 12.31 42 8.64 42 6.11 38 4.43 37 3.23 41
L/H
2.29
1.62
1.17
8
.73
.86
Additional Specifications:
Clutch Housing:
• SAE #1 and #2. Cast iron and aluminum available.
PTO Openings:
• Right: 45-tooth; 6/8 pitch gear. Left: 47-tooth; 6/8 pitch gear.
• Turn at 0.79 of engine speed.
Oil Capacity:
• Approx. 14 qts (13.25 ltrs).
• Integral oil pump standard. Available oil cooler.
Page 1 of 1
© 2016 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
2CXD3X
High Strength Steel (HSS) Day Cab with B-Pillar Mounted
Exhaust
Affects:
Related:
VN
Engine (101)
Exhaust System (230)
Exhaust Outlet Package (232)
Exhaust Features (K0X)
Aerodynamic Device Cab Skirt (45X)
February 23, 2016
Updated:
Features: The VN and VHD day cabs are available with a unique exhaust solution that does not protrude behind
the cab. The vertical exhaust pipe is located in the B-pillar depression on the passenger side in a "Pack Stack"
design. This exhaust solution provides a clean back of cab (BOC) above the frame allowing body builders to utilize
the space behind the cab efficiently.
The stack is a 6” pipe surrounding a 5” perforated inner pipe. Fiberglass insulation
separates the inner and outer pipes. This reduces heat and noise in the cab and
contributes to the overall operating comfort and efficiency of the VN and VHD.
2CXD3X– High Strength Steel (HSS) Day Cab with B-Pillar Exhaust shown on VNL
2CXD3X – High Strength Steel (HSS) Day Cab with B-Pillar Exhaust shown on VNM
Page 1 of 2
© 2016 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
2CXD3X
High Strength Steel (HSS) Day Cab with B-Pillar Mounted
Exhaust
Updated:
February 23, 2016
2CXD3X – High Strength Steel (HSS) Day Cab with B-Pillar Exhaust shown
on VHD
Day Cab Interior Dimensions
Note: 18” clearance between steering wheel and seat back is with steering wheel in fixed position.
Page 2 of 2
© 2016 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and accurate
information, always refer to TM2 for the electronic version of this document.
370403
Volvo VF14 14,600 Lb. Front Springs
Affects:
Related:
VN
Front Suspension Package (371)
Front Brake Dimension (U5X)
Front Axle Hubs (0KX)
December 3, 2015
Updated:
A Better Choice for Every Application
Volvo VF14 steer axles are specifically designed for the demands of
highway applications, with better control, easier handling, and less
maintenance. The 13,200-lb. through 14,600-lb. capacity axles are the
perfect choice for Volvo VN tractors.
Forged I-beam Construction
Volvo steer axles feature a forged I-beam that’s the strongest, and the
lightest, on the road today. More durability and carrying capacity at a lighter
component weight will help keep costs down.
Keeping You in Control and With Less Maintenance
Volvo steer axles are engineered for better handling. Thanks to the precise
assembly, no end-play adjustment is needed. Volvo steer axles are not only
stronger and lighter, but designed to last longer with less maintenance.
Heavy Duty Kingpins
The Volvo steer axle features a heavy-duty king pin with a tapered design. For a driver, that
means improved handling, with better control and stability, and a smooth and firm ride, even with
tight wheel cuts. This king pin also delivers enhanced bearing clearance and durability. And
since the knuckle is solidly attached to the axle beam, no adjustment is needed.
Specifications
Axle
Model
Type
Brakes
KPI Type Size
Suspensions
Spring
Type
Beam Center
Available
Capacity Axle Flange
(lbs)
Drop Width
Web
Inner/ Thrust
Outer
Brg
Brg
Type
VF14
15x4”
Reverse Elliot Drop-Forged
69.92” Cam 15x5” Parabolic
Heat Treated I-Beam
16.5x5”
13,200
3.5”
3.35”
0.394”
2.28”
Tapered
VF14
Reverse Elliot Drop-Forged
69.92” Cam 16.5x5” Parabolic
Heat Treated I-Beam
14,600
3.5”
3.35”
0.394”
2.28”
Tapered
Equally Strong Warranty
In addition to outstanding quality and performance, the Volvo steer axle is supported by a warranty that carries
its weight in piece of mind. Refer to the Volvo Chassis Protection Plan Certificate for details.
Page 1 of 1
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
330684
Meritor MT-40-14X4D Hypoid Rear Axle (HD Housing)
40,000 lb Capacity
Affects:
Related:
VN, VHD
Engine Package (101)
Rear Axle Ratio (TAX)
Rear Suspension (350)
April 20, 2015
Updated:
®
The Meritor 14X™ Tandem Drive axle is the next evolution of the successful Meritor RT-40-145, delivering
every benefit of its successor – and more. The new 14X includes a more robust, 20% larger, Inter-Axle
Differential (IAD) to handle today’s higher torque engines. The D Series (-14X3D) axle features a Hypoid design
carrier for vocational applications and/or highway applications which require a full locking differential. The 14X
Hypoid offers the most complete range of axle ratios – from 2.64 to 7.17 – and is also the lightest-weight axle in
its class.
Features & Benefits
More Robust Inter-Axle Differential (IAD)

20% larger than the competition with fewer parts

Ability to handle up to 2050 lb-ft of torque in certain
applications

New IAD needle bearings for reduced heat and wear,
which delivers increased reliability
Most Complete Range of Ratios in the Industry

2.47 - 4.11 (Amboid) and 2.64 - 7.17 (Hypoid) are the
widest ranges to match application and specific engine
manufacturer’s recommendations
Industry-Leading Axle Breather

Designed for today’s extended-drain synthetic lubes

Helps prevent water and other contaminants from entering the axle while keeping lube in place
Specifications
Model *
MT-40-14X3D
MT-40-14X4D
GAWR - lbs. (kg)
40,000 (18,160)
GCW - lbs. (kg) - Max 3% Grade (Turnpike)¹
145,000 (65,830)
GCW - lbs. (kg) - Max 8% Grade (Paved)¹
125,000 (56,750)
Available Ratios (Hypoid)
2.64, 2.79, 2.85, 3.08, 3.25, 3.36, 3.55, 3.70, 3.90, 4.11,
4.33, 4.63, 4.88, 5.29, 5.57, 5.86, 6.14, 6.43, 6.83, 7.17
Ring Gear Size - in. (mm)
15.31 (388.9)
2.10 (53.3) – 41 Teeth
Axle Shaft Spline Size - in. (mm)
Body Diameter - in. (mm)
Housing Box Size - in. (mm)
Wall Thickness at Spring Seat - in. (mm)
2.00 (50.8)
5.25 x 4.62 (134 x 117)
0.37 (9.5)
0.43 (11.0)
* Axle model designations will vary according to options
¹The permitted use of axles, brakes and other components, including the capacity ratings shown, vary with application and service.
Additional Information
Page 1 of 3
© 2015 Volvo Group North America, LLC. Information is correct at time of publication and is subject to change without notice. If you see
information you believe to be incorrect or incomplete, please contact Product Marketing at (336) 393-3200. For the most current and
accurate information, always refer to TM2 for the electronic version of this document.
meritor 14X tandem drive axle
Design features for increased
performance demands
Complete ratio range
n Larger main differential bearings for up to
30% more capacity
n New 2.47 ratio is the fastest axle ratio in the industry
and the most efficient solution for vehicles with
direct drive transmissions
nSmooth internal surfaces of the carrier castings
and elimination of main differential case ribs
minimize lubricant churning loss
n 2.47 - 7.17 is the widest range to match your
application and specific engine manufacturer’s
recommendations
nLow spiral-angle-design gearing helps ensure
increased efficiency and improved bearing life
n2.47 - 4.11 Amboid pinion position
nMultiple internal magnets for increased debris
collection and smooth running
More robust Inter-Axle
Differential (IAD)
n 20% larger Inter-Axle Differential (IAD)
for increased capacity, with fewer parts
n Ability to handle up to 2050 lb. ft. of torque
in certain applications
nLubrication reservoir keeps lubricant in
the input shaft bearing at all times for
increased lubrication flow, which reduces
wear and yields greater reliability;
no need to wait for splash to deliver lubricant
nNew needle bearings system in the Inter-Axle
Differential helical gear reduces heat and
wear and provides increased reliability
n2.64 - 7.17 Hypoid pinion position
14X Axle Specifications
Ratings
pounds
(kg)
Axle
Model
GCW Highway
pounds
(kg)
Maximum
3% Grade
(Turnpike)
Maximum
8% Grade
(Paved)
Standard
Ratios*
34,000
(15,436)
MT-34-14X
80,000
(36,320)
80,000
(36,320)
2.47, 2.64, 3.08, 3.25,
3.36, 3.42, 3.55,
3.70, 3.90, 4.11
Optional Ratios Available
40,000
(18,160)
MT-40-14X
145,000
(65,830)
125,000
(56,750)
2.47, 2.64, 3.08, 3.25,
3.36, 3.42, 3.55, 3.70,
3.90, 4.11, 4.33, 4.63,
4.88, 5.29, 5.86,
6.14,6.43, 6.83, 7.17
44,000
(19,976)
MT-44-14X
Not Rated
68,000
(30,872)
GVWR Only
3.70, 3.90, 4.11, 4.33,
4.63, 4.88, 5.29, 5.86
Available in Hypoid
Ratios Only
Moving you forward.
Behind you all the way.
Our representatives have the experience, the
expertise and the global support network needed
to provide you with unsurpassed assistance when
specifying your drive axle system.
With unmatched consultation and follow-through,
we can provide you with the guidance needed to
optimize your spec.
Every Meritor 14X axle receives unsurpassed global
service and support, with distribution centers
strategically located to reduce downtime and
provide timely and complete aftermarket support.
If your fleet is looking for optimized performance
and value, with significantly lower life cycle costs,
the Meritor 14X is the axle you need to spec.
For more information, talk to your local dealer or
visit meritor.com today.
Ring
Gear Size
(Pitch
Diameter)
inches
(mm)
Axle
Shaft
Spline
Size
inches
(mm)
Body
Diameter
inches
(mm)
Housing
Box Size
inches
(mm)
Wall Thickness
at Spring Seat
inches
(mm)
Wheel-End
Series
0.37 (9.5) Std/DualTrac™
0.43 (11.0) Std/DualTrac
0.56 (14.3) Wide Track
1.88 / 2.00
(47.8 / 50.8)
15.31
(388.91)
2.10
(53.3)
41 Teeth
2.00
(50.8)
0.37 (9.5) Std/DualTrac
5.25 x 4.62 0.43 (11.0) Std/DualTrac
(1.34 x 1.17) 0.50 (12.7) Standard Track
0.56 (14.3) Wide Track
0.50 (12.7) Standard Track
0.56 (14.3) Wide Track
R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement