- Oerlikon
Arc equipment
Personal protective equipment
MMA power sources .................................................................................................... p 4 to 9
TIG power sources and torches .................................................................. p 10 to 17
MIG/MAG equipment and torches ............................................................. p 18 to 31
Plasma cutting machines ................................................................................. p 31 to 32
Helmets ............................................................................................................................. p 51 to 53
LCD autodarkening helmets ............................................................................. p 54 - 55
Goggles ans spectacles ..................................................................................................... p 56
Leather clothes, shoes and gloves ............................................................. p 57 - 58
Handshields .................................................................................................................................. p 60
Consumables
Coated electrodes ...................................................................................................... p 33 - 34
MIG MAG wires ........................................................................................................... p 35 to 38
TIG rods ............................................................................................................................. p 38 to 40
Collective shop protection
Strips - Curtains ....................................................................................................................... p 61
Screens ............................................................................................................................................ p 62
Accessories and tools for welders
Fume extraction
Electrode holders .................................................................................................................... p 41
Cable, connectors and clamps .................................................................................... p 42
Quivers - Markers ................................................................................................................... p 43
Sprays (antispatters – cracks detection products) ................................... p 44
Tungsten electrodes sharpeners ............................................................................... p 45
Cleaning equipment for TIG welds ........................................................................... p 45
Hoses ................................................................................................................................................. p 46
Quick action couplings ....................................................................................................... p 47
Cutting nozzles .......................................................................................................................... p 47
Grinding disks ............................................................................................................................ p 49
Grinding Magnetic clamps .............................................................................................. p 50
MIG/MAG welding torches .............................................................................................. p 63
Collection units and tables ............................................................................................. p 64
Arms .................................................................................................................................................... p 65
Automatic standard equipment
Positioners ........................................................................................................................ p 66 - 67
Rotators ............................................................................................................................................ p 68
Carriage ........................................................................................................................................... p 69
Cutting equipment .............................................................................................................. p 70
PICTOGRAMS MEANING
Power factor control and
limitation of harmonic current
in the public network
Warranty period for
professional equipment
Low power
consumption
Pulsed mode welding and
synergic setting
Warranty period for
industrial equipment
Modular installation
Power source can be
used with important
length of primary cable
TIG LIFT : arc striking
when lifting the torch
Welding of cellulosic coated
electrodes
Help to the power source
setting
4 drive rollers wire feeding
All in one on site packaging
High frequency arc striking
Motor generator compatible
Multi voltage power source
Voltage Reduce Device =
Reduction of the no-load
voltage (better safety when
welding in humid environment)
4 rollers wire feeding
2 rollers wire feeding
Single phase primary
current
TIG LIFT + : arc striking
when lifting the torch
with 4 time simulation
Plasma cutting
installation with central
connector
Power source allowing
arc gouging process
FLEX LINE :
multivoltage power
(single of three phase)
Controlled fan for
power source cooling
Three-phase primary
current
New product
3
POWER SOURCES FOR MMA WELDING
MINIARC
3.2
CITOARC
1600 / 1750
Ø ELECTRODES 1.6 to 3.2 mm
Ø ELECTRODES 1.6 to 3.2 mm
FEATURES & BENEFITS
FEATURES & BENEFITS
The MINIARC 3.2, known for its exceptional “weight/power”
ratio, is suitable for any maintenance activities and everyday
intervention operations.
Power sources for manual metal arc welding for industrial and
professional use. Compact and reliable system. Compatible with motor
generator.
■ PROFESSIONAL
Compatible with motor generators
■ POWER SUPPLY
230 V single-phase
■ LIGHTWEIGHT
less than 7 kg
■ HIGH PERFORMANCE
High duty cycle at 40 °C
■ RELIABLE
Safe and reliable
■ ULTRA-LIGHT
Less than 3.8 kg
■ HANDY
thanks to the handy carrying strap
■ EASY TO USE
Excellent arc striking and stability
thanks to the Hot Start, Arc Force
and Anti Stick functions
■ READY FOR USE
Delivered with case and accessories
■ EASY TO USE
Hot Start function to improve the
arc striking and Arc Force function
to avoid electrode sticking. Primary
cable with 16 A Schuko plug
(except 1600 model)
■ VERSATILE
welding with all coated electrode
(except cellulosic)
2015-765
2015-821
■ OPTION
• TIG torch WTT2 9V: W000278876
• maintenance box for torch:
W000371535
■ OPTION
• MMA accessory kit:
W000268854
• TIG torch WTT2 17V:
W000278880
+ maintenance box:
W000371536
CITOARC 1600 CITOARC 1750
MINIARC 3.2
Power supply - 50/60 Hz
Maximum power consumption
Rms current
Max. absorbed power
Open circuit voltage
Current control
Duty cycle at 40 °C
(EN 60974-1)
Connector dimensions
Protection index
Dimensions
Weight
Standards
Cat. nr
4
230 V +/-15% - 1 ph
35 A
10 A - 11 A
4.8 kW
69 V
10 - 150 A
10%
150 A
60%
70 A
100%
55 A
9 mm
IP 23S
220 x 120 x 320 mm
3.8 kg
EN 60974-1 / EN 60974-10
W000385238
Power supply - 50/60 Hz
Maximum power consumption
Rms current
Max. absorbed power
Open circuit voltage
Current control
Duty cycle at 40 °C
(EN 60974-1)
Connector dimensions
Protection index
Dimensions
Weight
Standards
Cat.nr
230 V +/-20% - 1 ph
31 A
36 A
19 A
16 A
4.6 kW
5 kW
85 V
5-150 A
5 - 160 A
35%
150 A
160 A (20%)
60%
120 A
120 A
100%
100 A
100 A
9 mm
IP 23S
145 x 230 x 365 mm
7 kg
EN 60974-1 / EN 60974-10
W000385242
W000385243
PORTABLE INVERTERS FOR DC WELDING
CITOARC FORCE
CITOARC 1450
FORCE
Power supply
Primary effective consumption
Motor generator power
No-load voltage
Welding intensity
Duty cycle
60%
(10 min. cycle @ 40 °C)
100%
Electrode diameter
Connector size
Dimensions
Weight
Protection index
Insulation class
Standards
CITOARC 1650
FORCE
CITOARC 1850
FORCE
230 V single phase (+15/-20% - 50/60 Hz)
12 A
15 A
15 A
5.5 kVA
6.8 kVA
6.8 kVA
48.4 V
48.4 V
48.4 V
10 - 140 A
10 - 160 A
10 - 180 A
140 A (40%)
160 A (30%)
180 A (20%)
120 A
140 A
140 A
100 A
120 A
120 A
1.6 - 3.2 mm
1.6 - 4.0 mm
1.6 - 4.0 mm
9 mm
9 mm
9 mm
320 x 170 x 395 mm
320 x 170 x 395 mm
320 x 170 x 395 mm
6.6 kg
6.6 kg
6.6 kg
IP 23
H
EN 60974-1 / EN 60974-10 / EN 61000-3-2/12
To order:
Power source
W000385251
W000385252
is the technical solution to
achieve conformance to the
limitation of the harmonic current
for equipment connected to public
low voltage network which is now
mandatory in Europe
(EN 61000 - 3 -12 standard).
PFC results in lower effective
current consumption at the
same output welding power,
also maximising electronic
component lifetime.
FEATURES & BENEFITS
W000385253
■ Better compatibilty with motor generator
due the FORCE device (PFC contoller)
Add ons:
MMA kit (1) 25C25+
Valve TIG torch WTT2 9 V - 4 m
Valve TIG torch WTT2 17 V - 4 m
EXPLORATOR case
PFC
W000260683
-
W000278876
-
■ Build in Hot Start and
Anti Sticking devices
W000278880
■ Rutile and basic coated electrodes
W000371907
■ Noise reduction due to
smart fan system
(1) Electrode holder and earth clamp with welding cables
■ Compact design
■ Low primary consumption
2015-769
2016-101
2016-098
■ TIG welding possible (TIG LIFT device)
2016-071
EXPLORATOR
case
5
INVERTERS FOR DC WELDING
For demanding activities such as on site welding. Sturdy equipment with high liability and high duty cycle works.
CITOARC 1900C FORCE
FEATURES & BENEFITS
■ Rugged “on site” design
■ Build in Hot Start and Anti
Sticking devices
■ Motor generator compatible
■ MMA - TIG LIFT+ modes
■ Arc dynamism control
2015-741
■ Rutile, basic and cellulosic
coated electrodes
■ Low primary consumption
■ VRD function to increase safety
when working in humid environment
CITOARC 3000 MV
FEATURES & BENEFITS
■ Sturdy and liable
■ Rutile, basic and cellulosic coated
electrodes
■ Digital display of parameters
■ Hot Start build in device for easy arc striking
■ Arc Force setting from the front panel for a
better arc stability
■ Anti Sticking device for easier welding
■ Versatile: single or three phase power
connection, with input voltage range
between 180 V and 440 V
■ VRD device to increase safety when
working in humid environment
2015-311
■ TIG LIFT device
Power supply
(+/- 20% - 50/60 Hz)
Primary effective consumption
Motor generator power
No-load voltage
Welding intensity
Duty cycle
60%
(10 min. cycle @ 40 °C)
100%
Electrode diameter
Connector size
Dimensions
Weight
Protection index
Insulation class
Standards
CITOARC
1900C FORCE
CITOARC
3000 MV
230 V single-phase
230 V single or three-phase 400 V three-phase
16 A
7.3 kVA
67 V (14 V VRD)
5 - 160 A
160 A (50%)
150 A
130 A
1.6 - 4.0 mm
13 mm
200 x 365 x 475 mm
9 kg
9A
9 kVA
105 V (14 V VRD)
220 A
440 V
220 A (40%)
270 A (35%)
190 A
205 A
150 A
160 A
1.6 - 5.0 mm
13 mm
250 x 470 x 450 mm
19 kg
IP 23
H
EN 60974-1 / EN 60974-10
To order:
Power source
W000385258
W000384358
Add ons:
Kit arc (1)
Remote control
Valve TIG torch WTT2 - 26 V - 4 m
Maintenance box for WTT2 26
6
W000260684
(1) Electrode holder and earth clamp with welding cables
W000011139
W000242069
W000278885
W000371536
CITOARC 2200i VRD
FEATURES & BENEFITS
■ Sturdy and liable
■ Digital display of parameters
■ Hot Start build in device for easy arc striking
■ Arc Force setting from the front panel for
a better arc stability
■ Anti Sticking device for easier welding
■ TIG LIFT+ device with striking
and slope down control
■ Rutile, basic and cellulosic
coated electrodes
2009-057
■ VRD device to increase safety
when working in humid environment
CITOARC 3500i CC/CV
FEATURES & BENEFITS
CITOARC
2200I VRD
CITOARC
3500I CC/CV
400 V three-phase
(+/- 20% - 50/60 Hz)
400 V three-phase
■ Rugged “on site” design
■ Build in Hot Start and Anti Sticking devices
Power supply
■ Digital display of parameters
Primary effective consumption
Primary maximum consumption
No-load voltage
Welding intensity
■ MMA - TIG LIFT - MIG - GOUGING
■ Arc dynamism control
■ Rutile and basic coated electrodes
■ In option remote control
Duty cycle
(10 min. cycle @ 40 °C)
2006-762
Electrode diameter
Connector size
Digital display
Dimensions
Weight
Protection index
Isolation class
Standards
9A
9 kVA
105 V (14 V VRD)
5 - 220 A
35%
220 A (40%)
60%
190 A
100%
150 A
1.6 - 5.0 mm
13 mm
Yes
250 x 470 x 450 mm
19 kg
IP 23
28.5 A
91.2 V
5 - 350 A
350 A
300 A
250 A
1.6 - 6.3 mm
13 mm
Yes
525 x 300 x 390 mm
29 kg
IP 23 S
H
EN 60974-1 / EN 60974-10
To order:
Power source
W000268694
W000263469
Add ons:
MMA kit (1)
W000011139
MMA remote control 10 m
Additional length for remote control - 15 m
M200 TIG add on (2)
W000242069
-
DV YARD autonomous wire feeder
-
W000260682
(400 A @ 35% maxi)
W000305048
W000305056
W000305050
W000382134
W000382135 (3)
(1) Electrode holder and earth clamp with welding cables (2) TIG welding with HF striking
(3) With build in flowmeter
7
RECTIFIERS FOR MMA DC WELDING
CITOROD T
The CITOROD T power source range has been designed for the most demanding on-site and workshop applications.
Highly efficient welding using rutile and basic electrodes at a competitive value.
FEATURES & BENEFITS
■ Convenient hand-barrow
■ Efficient fan cooling
■ Bi-voltage
■ Lifting rings
2012-537
2012-540
2015-264
■ Sturdy
CITOROD 3000 T
Primary supply
Primary effective consumption
Primary consumption at I max.
No-load voltage
Welding intensity
35%
Duty cycle
(10 min. cycle
60%
@ 40 °C)
100%
Electrode diameter
Connector size
Dimensions
Weight
Protection index
Insulation class
Standards
25 A / 15 A
42 A / 33 A
66 V
55 - 260 A
260 A
200 A
155 A
2.0 - 4.0 mm
83 kg
CITOROD 4000 T
CITOROD 4500 T
230 V / 400 V three-phase (+/- 10% - 50/60 Hz)
34 A / 19.5 A
53 A / 30 A
57 A / 33 A
78 A / 45 A
70 V
63 V / 70 V
50 - 325 A
60 - 400 A
325 A
400 A (@45%)
250 A
345 A
190 A
265 A
2.5 - 5.0 mm
2.5 - 6.3 mm
13 mm
560 x 730 x 1 080 mm
107 kg
123 kg
IP 21
H
EN 60974-1 / EN 60974-10
To order:
Power source
W000381567
W000381568
W000381569
W000011139
W000260681
W000305050
W000260682
Add ons:
MMA kit (1)
M 200 TIG add on (2)
(1) Electrode holder and earth clamp with welding cables
8
(2) TIG welding with HF
RECTIFIERS FOR MMA DC WELDING (thyristor technology)
CITOROD 4000 XT / 6500 XT
Reliable and of robust design, these machines provide excellent and consistent service in demanding on-site and workshop conditions.
CITOROD XT provides both MMA and Gouging electrode capability and MIG and TIG process options using addition add-on equipment.
FEATURES & BENEFITS
■ Designed for the most demanding
welding applications in severe
conditions
■ Exceptional versatility
■ Digital display of parameters
■ Adjustable Hot Start and Arc Force
build in devices
■ CV electrical caracteristics
CITOROD
4000 XT
■ MMA - TIG - MIG - Gouging process
■ High performance power capability
■ Maintained performance with
long length cables (up to 50 m).
CITOROD XT sets will remain
efficient for all applications
OR
THYRIST
Power supply
Primary effective consumption
Primary consumption at I max
No-load voltage
Welding intensity
Duty cycle
(10 min. cycle @ 40 °C)
Electrode diameter
Connector size
Digital display of parameters
Dimensions
Weight
Protection index
Insulation
Standards
CITOROD
6500 XT
230 V / 400 V three-phase (+/- 15%)
40.6 A / 23.5 A
61.5 A / 35.4 A
69 A / 39.9 A
102.2 A / 59.4 A
68 V / 75 V
68 V / 75 V
10 A (42 A*) - 400 A 10 A (52 A*) - 630 A
35%
400 A
630 A
60%
300 A
470 A
100%
230 A
370 A
1.6 - 6.3 mm
1.6 - 6.3 mm
13 mm
13 mm
Yes
Yes
1000 x 600 x 600 mm 1000 x 600 x 600 mm
128 kg
176 kg
IP 23
H
EN 60974-1 / EN 60974-10
* Minimum current with cellulosic electrode.
To order:
W000277995
2008-797
Power source
W000277994
Add ons:
MMA kit (1) 50C50
MMA remote control 10 m
Additional length
for remote control - 15 m
VRD card (reduction of no load voltage)
M200 TIG add on (2)
DV YARD autonomous wire feeder
Kit roues + brancard
W000260682 (400 A @ 35% maxi)
W000219557
W000305056
W000373273
W000275160
W000305050
W000382134
W000382135 (with build in flowmeter)
W000278006
(1) Electrode holder and earth clamp with welding cables
(2) TIG welding with HF striking
Option
W000382134
DV YARD autonomous wire feeder
W000382135
2008-800
2011-51-3
(with integrated
gas
g flowmeter))
9
CITOTIG 1600 HPF
FEATURES & BENEFITS
■ A simple welding cycle
■ TIG DC or MMA mode
■ HF and TIG Lift
■ Pre and Post
gas adjustment
■ 2T / 4T mode
■ 160 A at 35%
2010-890
CITOTIG 1600 HPF
Single phase input voltage
Effective input current
Open circuit voltage
Welding current
35%
Duty cycle
60%
(at 40 °C)
100%
Protection index
Weight
Dimensions (L x l x h)
Standards
Power source alone
230 V (+/- 20% - 50/60 Hz)
11 A
49.5 V
10 - 160 A
160 A
140 A
120 A
IP 23 S
9.5 kg
205 x 345 x 460 mm
EN 60974.1 / EN 60974.10 /
EN 61000-3-2/12
W000273517
This equipment is designed for industrial and professional use only
CITOTIG 1800 FORCE / 2200 FORCE
CE
FEATURES & BENEFITS
Single phase input voltage
Effective input current
Open circuit voltage
Welding current
35%
Duty cycle
60%
(at 40 °C)
100%
Dimensions (L x l x h)
Weight
Protection index
Standard
Power source alone
Universal trolley
Cooling unit FREEZTIG
Cooling liquid FREEZCOOL 9.6 l
10
CITOTIG
2200 FORCE
230 V (+/- 20% - 50/60 Hz)
11 A
12 A
50 V
5 - 160 A
5 - 220 A
160 A (40%)
220 A
140 A
180 A
130 A
150 A
205 x 345 x 460 mm
9.5 kg
IP 23 S
EN 60974-1 / EN 60974-10 / EN 61000-3-2/12
W000382579
W000382580
W000375730
W000382728
W000010167
2015-142-ret
CITOTIG
1800 FORCE
2014-598
■ A complete welding cycle is straightforward to set: initial,
final current, up-slope, downslope, spot time, pre-gas, post-gas,
reduced current (4T), pulsed frequency regulation
■ High performance for MMA: up to 180 A at 40% at 40 °C
■ Program storage capability (30)
■ Digital display
Conform to the EN 61000-3-2/12 standard: limitation
of the harmonic current for equipment
connected to public low voltage network.
This equipment is designed for industrial and professional use only
DC RECTIFIERS CITOTIG DC
CITOTIG II 200 DC / 300 DC (W) / 400 DC (W)
CITOTIG II DC with inverter technology are your welding partners in workshops or on-site applications.
Powerful, rugged and easy to use installations. HF striking and excellent stability.
High quality MMA welding performance with rutile, basic and cellulosic electrodes
FEATURES & BENEFITS
■ Single phase input voltage (CITOTIG II 200)
■ Three phase input voltage (CITOTIG II 300 / 400)
■ Numerical control of the welding current
■ Process: TIG DC, Pulsed TIG *, synergic pulsed TIG *
and MMA (rutile, basic and cellulosic electrodes)
■ Mode: 2T/4T, 4T with level or spot
Primary power supply,
■ Striking: HF or TIG LIFT
■ Complete welding cycle
■ Digital display
■ Remote control (manual or foot operated)
■ Storage of 9 programs
* On the ADVANCED versions.
CITOTIG II
200 DC
CITOTIG II
CITOTIG II
300 DC (W) 400 DC (W)
230 V single-phase
(+/-10%)
400 V three-phase (+20% / -15%)
Absorbing power at maxi. intensity
6.5 kVA
8.4 kVA
13.8 kVA
Open circuit voltage
80 V
80 V
80 V
35%
200 A
300 A
400 A
Duty cycle
60%
150 A
230 A
320 A
(at 40 °C)
100%
130 A
200 A
270 A
Welding current
5 - 200 A
5 - 300 A
5 - 400 A
Electrode diameter max.
4.0 mm
5.0 mm
6.0 mm
Power source 410 x 180 x 390 mm
500 x 180 x 390 mm
Dimensions
Power source
(l x w x h)
500 x 180 x 650 mm
+ Cooling unit
Power source
15 kg
22 kg
23 kg
Weight
Power source
33 kg
34 kg
+ Cooling unit
Standards
EN 60974-1 ; EN 60974-10
To order:
2011-127
W000279733
W000279734
W000379982
W000279722
W000277087
W000263311 (RC1)
W000270324 (RC1)
W0000263313 (FP1)
W000010167
2011-103
W000279732
-
2011-101
Power source ADVANCED version
Power source version EASY
Cooling unit COOLERTIG II DC
Trolley T3
5m
Manual
remote control
10 m
Foot-operated remote control
Cooling liquid FREEZCOOL 9.6 l
This equipment are designed for industrial and professional use
only and does not comply with EN 61000-3-2/12. If it is connected
to a public low voltage system, it is the responsibility of the installer or
user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment
may be connected. (See also the instruction manual)
11
CITIG 1500 AC/DC
CITIG 1500 AC/DC
CITIG 1500 AC/DC machines are designed
for the welding specialists. It is the ideal machine
to meet the requirements of maintenance applications
Power supply
Effective input current
Open circuit voltage
Welding current
FEATURES & BENEFITS
Duty cycle at 40 °C
2006-413
■ User-friendly front panel
■ AC/DC welding currents
■ MMA or 2T-4T TIG and spot mode
■ Selection: pulsed TIG DC, AC with variable frequencies
and adjustment of the balance cleaning
■ Cleaning/penetration
■ Robustness
Electrode diameter max
Weight net
Cat. nr
230 V single phase
13 A
82 V
5 -150 A
150 A @ 30%
3.2 mm
21 kg
W000260970
This equipment are designed for industrial and professional use only and does not comply with EN 61000-3-2/12.
If it is connected to a public low voltage system, it is the responsibility of the installer or user of the equipment to
ensure, by consultation with the distribution network operator if necessary, that the equipment may be connected.
(See also the instruction manual)
CITOTIG 240 AC/DC (W) / 310 AC/DC (W)
CITOTIG 240 AC/DC (W) / 310 AC/DC (W) machines fulfill the most demanding welders needs.
The rugged design and optimum performance makes these machines the ideal
partner for all workshop and on-site requirements
ATTENTION:
Power supply
230 V single-phase
400 V three-phase
(+/-15%)
(+/-10%)
50/60 Hz
Absorbing power
6,0 kVA
6,0 kVA
at maxi. intensity
Open circuit voltage
58 V DC
35%
230 A (at 40%)
300 A
Duty cycle
60%
200 A
230 A
(at 40 °C)
100%
170 A
200 A
Welding current
3 to 230 A
5 to 300 A
Dimensions
475 x 200 x 405 mm 505 x 195 x 440 mm
(L x l x h)
Weight
17 kg (25 kg)
25 kg (33 kg)
Protection
IP 23 C / H
index / class
Standard
EN 60974-1 / EN 60974-10
To order:
W000275842
W000278470
W000381667
W000381669
W000275844
W000278471
W000277087
W000010167
12
Easy version without Tack for
thin, pulsed, synergic pulsed,
memories, bi level, etc...
■ Up to 230 A at 40% available on a
single phase machine for 240 model
■ Up to 300 A at 40% (three phase) for 310 model
■ Easy to move: only 17 kg (240 model) 25 kg for the 310 model
■ Motor generator compatible
■ Digital display
■ TACK FOR THIN for perfect tack welding *
■ BI LEVEL for an improved cycle
with two current levels *
■ A compact machine, with possibility
of user customization
■ Offshore and repair applications using
TIG and MMA welding
■ Processes TIG DC - AC - Synergic pulse * Compotig process (MIX AC/DC *) pulse welding *
■ 10 Programme
memory *
* On ADVANCED
version.
W000263311 (RC1)
W0000263313 (FP1)
W00002
Conform to the EN 610003-2/12 standard: limitation
of the harmonic current
for equipment connected to
public low voltage network.
This equipment are designed for industrial and professional use only
2010-636
W000270324 RC1)
2009-562
Power source
ADVANCED version
Power source
EASY version
Cooling unit
Trolley T3
Cooling liquid
FREEZCOOL 9.6 l
Manual
5m
remote
10 m
control
Foot-operated
remote control
FEATURES & BENEFITS
2011-006
CITOTIG 240 CITOTIG 310
AC/DC (W) AC/DC (W)
This equipment are designed for industrial and professional use
only and does not comply with EN 61000-3-2/12. If it is connected
to a public low voltage system, it is the responsibility of the installer or
user of the equipment to ensure, by consultation with the
distribution network operator if necessary, that the equipment
may be connected. (See also the instruction manual)
PROTIG III range
Round handle with blade trigger (RL)
These classic round handled TIG torches have been
designed to meet all welding expectations in all positions.
The trigger module is fully adjustable and can be moved
to any position around the handle.
Connectors
The connectors to the machine are a new design, compact and fully
protected delivering both strength and quality. All hoses are rubber with
a neopren sheath for heavy duty work.
Water cooled
C5B/simple
(C5B/S)
Air cooled
C5B/Simple
(C5B/S)
2015-277
New design with sturdy
metallic blade trigger.
2015-279
2015-278
The neopren sheath
and the handle sleeve
ensure full flexibility of
the harness.
2015-276
Air cooled
Duty cycle 60%
back cap
Fitted
nozzle
as standard
electrode
PROTIG III 10
PROTIG III 20
PROTIG III 30
PROTIG III 40
80 A
long
Ø 10 mm
Ø 1.6 mm
100 A
long
Ø 10 mm
Ø 2.0 mm
130 A
long
Ø 12 mm
Ø 2.4 mm
200 A
long
Ø 12 mm
Ø 2.4 mm
To order:
Length
Catalogue number
5m
W000382715
8m
W000382716
5m
W000382717
8m
W000382718
5m
W000382719
8m
W000382720
5m
W000382721
2015-278
Water cooled
Duty cycle 100%
Fitted
as standard
8m
W000382722
back cap
nozzle
electrode
PROTIG III 10 W
PROTIG III 35 W
PROTIG III 40 W
250 A
long
Ø 12 mm
Ø 2.4 mm
350 A
long
Ø 15 mm
Ø 4.0 mm
450 A
long
Ø 14 mm
Ø 4.8 mm
To order:
Length
Catalogue number
5m
W000382723
8m
W000382724
5m
W000382725
8m
W000382726
5m
W000382727
13
CITORCH T NG range
Ergonomic handle with button (EB)
The best TIG torches with an advanced ergo-design, using a colored
soft grip for a maximum welder comfort.
These torches will give you an optimum welding quality, and
increase the communication between the welder and the machine.
Connectors
The connectors to the machine are a new design, compact and
fully protected delivering both strength and quality.
All hoses are rubber with a woven sheath for heavy duty work.
Air cooled
(C5B)
Water cooled
(C5B)
2010-667
The modular system brings a
increased control over the power
source. All torches are delivered
with a single button module.
2016-209
2016-207
The ball joint gives excellent flexibility, and
the first 1 m of the harness is leather which
increases the service life of the welding hose.
2010-667
2010-666
CITORCH T NG 10
CITORCH T NG 20
CITORCH T NG 30
CITORCH T NG 40
125 A
80 A
long
Ø 10 mm
Ø 1.6 mm
150 A
100 A
long
Ø 10 mm
Ø 2.0 mm
200 A
130 A
long
Ø 12 mm
Ø 2.4 mm
250 A
200 A
long
Ø 12 mm
Ø 2.4 mm
Duty cycle 35%
Duty cycle 60%
back cap
nozzle
electrode
Fitted
as standard
2010-665
2010-664
Air cooled
To order:
Length
Catalogue number
5m
W000278380
8m
W000278381
5m
W000278382
8m
W000278383
5m
W000278384
8m
W000278385
5m
W000278386
8m
W000278387
Duty cycle 100%
Fitted
as standard
back cap
nozzle
electrode
2010-670
2010-669
2010-668
Water cooled
CITORCH T NG 10 W
CITORCH T NG 35 W
CITORCH T NG 40 W
250 A
long
Ø 12 mm
Ø 2.4 mm
350 A
long
Ø 15 mm
Ø 4.0 mm
450 A
long
Ø 14 mm
Ø 4.8 mm
To order:
14
Length
Catalogue number
5m
W000278388
8m
W000278389
5m
W000278390
8m
W000278391
5m
W000278392
8m
W000278393
Adjustable heads
As an option, adjustable torch bodies are available,
designed to make welding in limited access
locations easier with a choice of 2 heads, small
and large which are mounted on air cooled or
water cooled bodies.
Choose one body and one head to get a complete
torch.
Cat. number
W000279381
W000279382
W000279383
W000279384
2010-949
2010-948
Designation
Air cooled body (10/20)
Water cooled body (10W)
Head CITORCH T NG 10 / PROTIG III 10
Head CITORCH T NG 20 / PROTIG III 20
Modular system of CITORCH T NG
Standard delivery for EB all torches is a single
button module. Other control module formats are
available to order.
Other control module formats
Single button
delivery
1
2
3
Cat. number
4
1 Horizontal potmeter
W000279370
2 Vertical potmeter
W000279246
3 Double button
W000279242
4 Blade
W000279245
Refer to the instruction manual to see the different connections for the modules.
For potmeter adapt the wiring to the welding machine.
Wear parts box
Extension
A complete kit for all applications.
The kit includes electrode collets,
ets, nozzles,
back caps and collet body.
For PROTIG III, CITORCH NG and WTT2 torches, the extension
harnesses are 15 m long and fitted with quick connectors and either
S (banana) or 5 pins type trigger plugs.
The connectors are protected by a leather cover with velcro fasteners.
2015-392
Cat. number
W000306441
W000306442
W000306443
W000306444
W000306445
Cat. number
W000306135
W000306136
2010-007
Designation
Torch 10/10W
Torch 20
Torch 30
Torch 40/35W
Torch 40W
Designation
Air cooled version
Water cooled version
15
TIG WTT2 Torches
TIG WTT2 Torches range is dedicated to needs of most demanding users.
Reliability is one of the major features of these products. Harness flexibility is the most appreciated
advantages of these torches. The various connections and handles fit with the current applications.
Handle
EB
RL
V
2010-686
2010-688
2015-673
2010-685
EB-FLEX
Connections
Air cooling
60%
35%
Cap
Nozzle
Electrode
Duty cycle at
Fitted with
Length
RL
Connection
Handle
V
EB-FLEX
Fitted with
Length
EB
EB-FLEX
Connection
Handle
16
S
C5B
S
C5B
S
2016-208
2016-209
S
Connection Ø 13 mm
WTT2 17
WTT2 26
80 A
110 A
100 A
135 A
Medium
130 A
180 A
Ø 10 mm
Ø 1.6 mm
Ø 12 mm
Ø 2.4 mm
Ø 2.0 mm
8m
W000278923
W000278922
W000278929
W000278926
-
4m
W000278883
W000278884
W000278881
W000278882
W000278880
W000382782
8m
W000278918
W000278917
W000278920
W000278919
W000382783
WTT2 20 W
WTT2 18 W
200 A
250 A
320 A
350 A
100%
60%
Cap
Nozzle
Electrode
Duty cycle at
C5B
Connection Ø 13 mm
WTT2 9
4m
W000278878
W000278879
W000278877
W000278875
W000278876
W000382781
S
C5B
S
C5B
V
S
Water cooling
RL
V
Connection Ø 9 mm
for 9 V and 17 V
Connection
Ø 13 mm for 26V
S
Connection
Ø 13 mm
C5B
Connection
Ø 13 mm
EB
2016-205
2016-206
Water cooling
2016-207
Air cooling
Medium
Ø 12 mm
Ø 2.4 mm
4m
W000278893
W000278894
W000278891
W000278892
W000382786
8m
W000278906
W000278905
W000278911
W000278909
W000382787
4m
W000278897
W000278898
W000278895
W000278896
W000382788
8m
W000278900
W000278899
W000278902
W000278901
W000382789
4m
W000278888
W000278890
W000278886
W000278887
W000278885
W000382784
8m
W000278914
W000278913
W000278916
W000278915
W000382785
Maintenance kits for WTT2 torches
For easier maintenance of your WTT2 torches.
Comprising most used wear parts.
KIT WTT2
17/26/18W
2011-203
Designation
Kit WTT2 9/9V/20W
Kit WTT2 17/26/18W
2011-201
KIT WTT2
9/9V/20W
Cat. nr
W000371535
W000371536
Tungsten electrodes WELDLINE
WP - WC 20 - WL 20 - WS 20
Since september 2014
Air Liquide Welding stopped
to propose Tungsten
electrodes with Thorium.
Use now Lanthanum
electrodes.
WP Pure Tugsten
AC current
WC 20 2% Cerium
DC current
WL 20 2% Lanthane
AC and DC current
WS 20 2% Rare earths
AC and DC current
1.0
1.6
2.0
2.4
2.5
3.2
4.0
W000010 009
W000010 010
W000010 011
W000010 012
W000010 013
W000010 014
W000010 015
W000010022
W000010023
W000010024
W000010025
W000010026
W000335150
W000010028
W000010373
W000010016
W000010017
W000010018
W000010019
W000010020
W000010021
W000335166
W000335167
W000335168
W000335169
W000335170
W000335171
W000335172
Universal trolley
■ Totally unbreakable
■ Totally imputrescible
■ That does not deteriorate
■ Indeformable
■ Insubmersible
■ Total security handling (rugged belt for safety))
■ Large diameter wheels (250 mm)
for easy moving of the trolley
■ Suitable for
- MMA equipment
- TIG installation even with cooling unit
and gas cylinder
- Plasma cutting equipment
Designation
Weight
Dimensions
Cat. nr
On site case
5.4 kg
620 x 520 x 220 mm
W000371907
Product
MMA
Plasma
cutting
2011-208
Universal on site case
MINIARC 3.2
CITOARC 1600 / 1750
CITOARC 1450 / 1650 / 1850 FORCE
CITOARC 1900 C FORCE
CITOARC 3000 MV
CITOCUT 10KT
CITOCUT 10i
CITOCUT 20i
MIG/MAG CITOMIG 200 MP / 200 MP HPF
Designation
Weight
Dimensions
Cat. nr
Universal
trolley
Universal
on site case
✓
✓
✓
✓
✓
✓
✓
✓
✓
N/A
✓
✓
✓
✗
✗
✓
✗
✗
TIG
2012-529
Ø mm
2006-528
150 mm long (except for WS 20 175 mm)
Universal trolley
19.0 kg
1 210 x 648 x 430 mm
W000375730
Product
Universal
trolley
Universal
on site case
CITOTIG 1600 HPF
CITOTIG 1800 FORCE
CITOTIG 2200 FORCE
CITOTIG II 200 DC
CITOTIG II 300 DC (W)
CITOTIG II 400 DC (W)
CITIG 1500 AC/DC
CITOTIG 240 AC/DC (W)
CITOTIG 310 AC/DC (W)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✗
✗
✗
✗
✗
✗
17
PROFESSIONAL MIG/MAG COMPACT MACHINE (enclosed wire-feeder)
CITOMIG
200MP / 200MP HPF
CITOLINE 2000M
FEATURES & BENEFITS
■ User-friendly front panel
■ 2T/4T and spot modes
■ 4 roll wire feed
■ Reverse polarity
■ 8 voltage steps
■ 1 self position
■ Burn back time
■ Multi process: MIG-MAG / MMA / TIG
■ Inverter technology
■ Polarity reversal to allow self shielding
flux cored wire welding
■ On site concept
■ Specialised in thin sheet
■ Large LCD graphic display
■ 2T/4T and spot modes
■ 2 roll wire feed
■ 12 synergies 40 programs recordable
■ Wire spool diameter
200 mm (in option
300 mm)
FEATURES & BENEFITS
2015-248
2012-415
2013-662
1 machine,3 processes,
y
use it everywhere
!
Only for the 200MP HPF version
CITOMIG 200MP
Power supply
Primary effective consumption
Primary consumption at I max.
No-load voltage
Welding current
100%
Duty cycle at 40°C
60%
20%
Wire diameter
Protection / Insulation class
Dimensions
Weight
Standard
Cat. nr
Recommended torches
18
CITOMIG 200MP HPF
230 V single phase ± 10% - 50 Hz
8.6 kVA
6.2 kVA
25 A
15 A
35 V in MIG - 65 V in MMA & TIG
35 V in MIG - 50 V in MMA & TIG
30-200 A
30-200 A
105 A
105 A
130 A
150 A
200 A
200 A
0.6 - 1.0 mm (1.2 mm in aluminium)
0.6 - 1.0 mm (1.2 mm in aluminium)
IP 22S
IP 22S
514 x 220 x 394 mm
514 x 220 x 394 mm
15 kg
15 kg
EN 60974-1 - EN 60974-5 - EN 60974-10 EN 60974-1 - EN 60974-5 - EN 60974-10
W000377723
W000383406
CITORCH M 181T or WMT2 15A
CITORCH M 181T or WMT2 15A
CITOLINE 2000M
14.3 A
32 A
18-35 V
35-180 A
85 A
110 A
180 A
0.6 - 1.0 mm
IP 23 / H
500 x 870 x 950 mm
52 kg
EN 60974-1 - EN 60974-10
W000261963
WMT2 15A or WMT2 25A
CITOLINE
2000T / 2500T
2012-427
2012-418
FEATURES & BENEFITS
■ User-friendly front panel
■ 2T/4T and spot modes
■ 4 roll wire feed
■ Reverse polarity (gasless)
■ 7 voltage steps (2000T)
10 voltage steps (2500T)
■ 2 inductance settings
CITOLINE
3000T / 3500T
FEATURES & BENEFITS
CITOLINE 2000T
Power supply
Primary effective consumption
Primary consumption at I max.
No-load voltage
Welding current
100%
Duty cycle at 40°C
60%
25%
Wire diameter
Protection / Insulation class
Dimensions
Weight
Standard
Cat. nr
Recommended torches
2012-448
2012-440
■ User-friendly front panel
■ 2T/4T and spot modes
■ 4 roll wire feed
■ Reverse polarity (gasless)
■ 2 x 7 voltage steps (3000T)
3 x 7 voltage steps (3500T)
■ 2 inductance positions (3000T)
3 inductance positions (3500T)
■ Digital display included
CITOLINE 2500T
CITOLINE 3000T
CITOLINE 3500T
230 V / 400 V three phase ± 10% - 50 Hz
14.8 A / 8.5 A
19.5 A / 11.3 A
25 A / 14.2 A
27 A / 15.6 A
33 A / 19 A
41 A / 24 A
18-40 V
18-45 V
18-45 V
35-250 A
35-300 A
35-350 A
110 A
180 A
210 A
170 A
230 A
270 A
250 A
300 A
350 A
0.8 - 1.0 - (1.2) mm
0.8 - 1.2 mm
0.8 - 1.2 mm
IP 23 / H
500 x 870 x 950 mm
620 x 940 1000 mm
71 kg
77 kg
96 kg
100 kg
EN 60974-1 - EN 60974-10
W000261966
W000261967
W000261970
W000261971
WMT2 25A
WMT2 25A
WMT2 25A or 36A
WMT2 36A
10.4 A / 6 A
19 A / 11 A
18-35 V
27-200 A
110 A
140 A
200 A (30%)
0.6 - 1.0 mm
19
PROFESSIONAL MIG/MAG SEPARATE MACHINES (external wire-feeder)
CITOLINE 3500 TS
CITOLINE 4500 TS CITOLINE 4500 TS W
FEATURES & BENEFITS
■ Power source with self
protected safety switches
■ Separate wire feeder
with digital display
■ 1 accessory kit for solid
wires 1.0-1.2 mm
■ User-friendly front panel
■ 2T/4T and spot modes
■ 4 roll wire feed
■ 3 x 7 voltage steps
■ 3 inductance settings
FEATURES & BENEFITS
CITOLINE 3500 TS
20
Power supply
Primary effective consumption
Primary consumption at I max.
No-load voltage
Welding current
100%
Duty cycle at 40°C
60%
35%
Wire diameter
Protection / Insulation class
Dimensions
Weight
Standard
Cat. nr power source
5m
Cat. nr DV 4004 CTL
wire feeder air
10 m
Cat. nr DV 4004 CTLW
10 m
wire feeder water
Cooler unit FC
Recommended torch
25 A / 14.2 A
41 A / 24 A
18-45 V
35-350 A
210 A
270 A
350 A
0.8 - 1.2 mm
890 x 610 x 1 030 mm
125 kg
W000261974
W000262182
W000262183
CITOLINE 4500 TS
CITOLINE 4500 TS W
230 V / 400 V three phase ± 10% - 50 Hz
35.5 A / 20.5 A
60 A / 34.5 A
19 - 54 V
51-450 A
270 A
345 A
450 A
0.8 - 1.2 - (1.6) mm
IP 23 / H
890 x 610 x 1 030 mm
135 kg
EN 60974-1 - EN 60974-10
W000261975
W000262182
W000262183
135 kg
-
-
-
W000262184
WMT2 36A
WMT2 36A
W000273686
WMT2 401W or 500W
2012-461
2012-455
■ Power source with self protected safety switchs
■ Separate wire feeder with
digital display
■ 1 accessory kit for solid
wires 1.0-1.2 mm
■ User-friendly front panel
■ 2T/4T and spot modes
■ 4 roll wire feed
■ 3 x 7 voltage steps
■ 3 inductance settings
INDUSTRIAL MIG/MAG INSTALLATIONS
300
400
400
500
XP (enclosed wire-feeder)
XP (enclosed wire-feeder)
XP S and SW (external wire-feeder)r)
XP SW (external wire-feeder)
2006-358
CITOMIG
CITOMIG
CITOMIG
CITOMIG
FEATURES & BENEFITS
2006-287
2006-787
■ User-friendly front panel
■ Pre-gas, post-gas and burn-back
times adjustment
■ ESP mode to adjust
easily the welding
parameters
■ Digital display
■ 2T/4T, spot and
intermittent modes
■ 4 roll wire feed
■ Reverse polarity
(gasless)
■ 12 voltage steps,
for 300XP model
■ 3 x 10 voltage steps
for 400XP & 500XP
■ 2 inductance settings
■ Fan on demand
■ Digital wire speed
regulation
■ Saturable
inductance
■ Spatter reduction
system
CITOMIG
300XP
Power supply
Primary effective consumption
Primary consumption at I max.
No-load voltage
Welding current
100%
Duty cycle at 40°C
60%
45%
Wire diameter
Protection / Insulation class
Dimensions
Weight
Standard
Cat. nr power source
5m
Cat. nr DV 4004 XP
wire feeder air
10 m
5m
Cat. nr DV 4004 XPW
wire feeder water
10 m
Recommended torch
CITOMIG
400XP
20.5 A / 12 A
27.7 A / 16 A
16.5 - 35.8 V
30-280 A
200 A
240 A
270 A
0.8 - 1.2 mm
390 x 780 x 825 mm
101 kg
W000260959
CITORCH M 241
W000260961
-
CITOMIG
400XP W
CITOMIG
400XP S
CITOMIG
400XP SW
230 V / 400 V three phase ± 10% - 50/60 Hz
47 A / 27 A
60 A / 34.5 A
16.6 - 45.8 V
28-380 A
280 A
320 A
380 A (@ 40%)
0.8 - 1.6 mm
IP 23 / H
925 x 580 x 1060 mm
161 kg
EN 60974-1 - EN 60974-10
W000260962
W000260964
W000260963
W000260999
W000261000
W000261001
W000261002
CITORCH M 341
CITORCH M 341W
or CITORCH M 441
or CITORCH M 441W
CITOMIG
500XP SW
44.9 A / 25.9 A
63 A / 36 A
15.8 - 50.4 V
16-480 A
350 A
410 A
480 A (@ 50%)
0.8 - 1.6 mm
201 kg
W000260966
W000261001
W000261002
CITORCH M 441W
21
INNOVATIVE AND POWERFUL MIG/MAG MACHINE
WITH INTEGRATED WIRE FEEDER
CITOPULS III 320 C / CITOSTEEL III 320 C
Modest in size, but with everything a big machine could dream of.
FEATURES & BENEFITS
■ Low Consumption
Welding current 320 A @ 40% with an
electrical primary consumption reduced at
the minimum - 16 A three-phase plug.
About 30% of saving on the annual electrical
invoice, compared to the use of a classical
MIG/MAG machine.
■ Reduced Weight
Body engineered in aluminium for lower
weight and easy transportability.
■ Technological Advance:
• 99 programs,
• Call programs with trigger,
• Welding cycle sequencer.
■ An universal machine with excellent
welding performances:
*
• Coated electrodes,
• Speed Short Arc,
• Flat current,
• Pulsed Arc (only CITOPULS III 320C).
■ Main applications
All main to weld base materials with wires up
to 1.2 mm:
• metallic construction
(on site and in workshop),
• workshop & yard maintenance,
• light production.
22
Watercooling on demand.
* Eco Friendly Welding and Cutting.
This label is awarded by Air Liquide Welding to products that contribute to a sustainable
development and/or to ensure better working conditions for welders.
CITOPULS III 320C
CITOSTEEL III 320C
Power source
Main power supply (three-phase)
Effective primary consumption
Fuse anti surge
Efficiency at max current
Power factor at max current
Duty cycle (@ 40 °C)
@ 40%
@ 60%
@ 100%
Duty cycle (@ 25 °C)
@ 100%
Welding intensity
Dimensions (LxWxH)
Weight
Standards
CITOPULS III 320C
CITOSTEEL III 320C
Build in wire feeder
400 V (+20% / -20%) - 50/60 Hz
11 A
16 A
90%
0.95
Rollers
Wire speed
4
1 - 25 m/min
Wire diameter (Carbon steel Stainless steel)
0.6 - 1.2 mm
Wire diameter
(FCW - Aluminium)
1.0 - 1.2 mm
320 A
280 A
220 A
300 A
15 A - 320 A
720 x 295 x 525 mm
29 kg
EN 60974-1 & EN 60974-10
Cooling unit
2010-464
To order:
Power source
2015-797
2015-802
COOLER II
On demand
Trolley
Trolley
for installation
Universal
trolley
W000375730
320 A @ 40 % CITOPULS III 320C W000385051
320 A @ 40 % CITOSTEEL III 320C W000385052
Aluminium welding kit
Remote
control
Anti-dust filter
RC SIMPLE (10 m)
for power source protection
W000275904
2011-186
W000277622
A composition of wire
guides and rollers for perfect
aluminium welding.
2015-030
ALUKIT DVU 1.0-1.2
Dust filter
W000373703
2011-186
TROLLEY II
W000383000
23
INDUSTRIAL HIGH TECH MIG/MAG INSTALLATIONS (Inverter technology) EASY TO USE FRONT PANEL
CITOSTEEL III 420 / 520
FEATURES & BENEFITS
■ Powerful 4-rollers feeder unit
■ 2T/4T mode and point mode
■ Standard MAG, Speed
Short Arc (SSA), HPS,
MMA, Gouging, MIG
Brazing
*
2016-367_ret
2010-754
■ Easy to set front panel
■ Pre & post gas setting
■ Synergic mode for welding
parameters
■ Digital display of parameters on
wire feeder and power source
CITOSTEEL III 420 CITOSTEEL III 520
Primary power supply –
3 Phases - 50/60 Hz
Maximum primary
consumption (100%)
Temporised fuses
Open circuit voltage
Welding range
Duty cycle
(10 min cycle at 40 °C)
Dimensions (L x l x h)
Weight
Protection index
Standards
400 V (+ 20% / - 20%)
26 A
33.9 A
32 A
HPS
15 - 500 A
HPSTM (High Penetration Speed)
(Higher productivity with lower
distorsion of base material
and less welding passes)
25 A
73 V
15 - 420 A
420 A (@40%)
500 A (@60%)
350 A (@100%)
450 A (@100%)
720 x 295 x 525 mm
34 kg
40 kg
IP 23 S
EN 60974-1 / EN 60 974-10
COOLER III
24
P500
DMU P400 DMU
expert
Rollers
Wire speed
Cooling Unit
Cooling power
Maximum pressure
Dimensions
Weight
Wire feeder
1.3 kW
4.5 bar
720 x 280 x 270 mm
16 kg
* Eco Friendly Welding and Cutting.
This label is awarded by Air Liquide Welding to products that contribute to a sustainable
development and/or to ensure better working conditions for welders.
Steel/stainless steel
Wire
diameter Cored wire /Aluminium
Control
Display
Protection / Insulation
Standard
Dimensions
Weight
4 drive rollers
1 to 25 m/min
0.6 - 1.6 mm
1.0 - 1.6 mm
2 potentiometers
2 encoders
2 displays + LCD
IP 23S / H
EN 60974-5 - EN 60974-10
265 x 590 x 383 mm
17.5 kg
INDUSTRIAL HIGH TECH MIG/MAG INSTALLATIONS (Inverter technology) EASY TO USE FRONT PANEL
CITOPULS III is the very latest innovative MIG/MAG advanced welding machines offering
the welding market superior quality welding. CITOPULS III has been designed in a modular
form for easy workshop mobility to suit all welding applications (manual or automatic).
ameter selection
These machines offer easy to understand process options and parameter
via the machine control panel or the wire feed unit.
*
CITOPULS III 420 / 520
FEATURES & BENEFITS
■ Storage of 100 welding
programmes
■ Parameter locking
with a digit code the
parameters will be
limited from 0 to
+/- 20% range
■ Full A1 automatic
interface included
2016-356_ret
■ A modular concept to meet
all user requirements
■ User friendly control panels
■ Small machine for easier access
■ Light installation
(37 kg for the power source)
■ Generator compatible
■ Full range of processes:
Standard MIG/MAG / Pulse /
Speed Short Arc / HPS MIG
brazing / MMA coated electrodes
■ Harnesses (up to 50 m)
■ In synergic mode, more than
100 synergies available
CITOPULS III 420 CITOPULS III 520
Power supply –
3 Phases - 50/60 Hz
400 V (+ 20% / - 20%)
Primary consumption
at I max.
Temporised fuse
No-load voltage
Welding current
@60%
Duty cycle
at 40°C
@100%
Protection
Standard
Dimensions
Weight
26 A
33.9 A
25 A
32 A
73 V
15-420 A
420 A
350 A
15-500 A
500 A
450 A
IP 23S
EN 60974-1 – EN 60974-10
720 x 295 x 525 mm
34 kg
40 kg
HPS
HPSTM (High Penetration Speed)
(Higher productivity with lower
distorsion of base material
and less welding passes)
Wire feeder
DMU P400
Rollers
Wire speed
Wire
diameter
Steel/stainless steel
Cored wire /Aluminium
Control
Display
Protection / Insulation
Standard
Dimensions
Weight
DMU P500 expert
4 drive rollers
1 to 25 m/min
0.6 - 1.6 mm
1.0 - 1.6 mm
2 potentiometers
2 encoders
2 displays + LCD
IP 23S / H
EN 60974-5 - EN 60974-10
265 x 590 x 383 mm
17.5 kg
Cooling Unit
COOLER III
Cooling power
Maximum pressure
Dimensions
Weight
1.3 kW
4.5 bar
720 x 280 x 270 mm
16 kg
* Eco Friendly Welding and Cutting.
This label is awarded by Air Liquide Welding to products that contribute to a sustainable
development and/or to ensure better working conditions for welders.
25
INDUSTRIAL HIGH TECH MIG/MAG INSTALLATIONS (Inverter technology)
CITOWAVE III
FEATURES & BENEFITS
■ Regulation and numerical controls: total control of wave form
alignment for process improvement and for exact parameter
reproduction
■ Increased power (Voltage/Current): increase the arc rigidity
with pulsed mode, which improves penetration and allow
a good fusion with usually “hard-to-weld” wires
■ More arc transfer regimes: Soft current, Pulsed, SSA, SSP,
SM, CDP, MIG brazing, MMA, PR Spray and HPS
■ Control of aluminium welding: special equipments,
adapted processes (SM: Spray Modal™), essential
HPSTM (High Penetration Speed)
(Higher productivity with lower
options for demanding applications (reduction of
distorsion of base material
micro porosity and increased penetration)
and less welding passes)
■ More memory: 153 welding synergies are available
for all welding applications. These machines also
include 100 programme memory selected via
the wire feeder, remote control or CITORCH ME range
■ More controls: parameters monitoring, indication
of the defects, parameters blocking on several levels,
printing, 99 programs, calibration
■ More cycles: 2T/ 4T/ Spot weld/Cold Double Pulse current (CDP)
■ More options: wide range for improved welding operations
and applications
*
2016-401_ret
HPS
Our solution for total
monitoring & traceability
of your welding activities.
CITOWAVE III 420 CITOWAVE III 520
Power supply –
3 Phases - 50/60 Hz
400 V (+20%/-20%)
Primary consumption at I max.
Welding current
Duty cycle at 40 °C
Dimensions (L x l x h)
Weight
Protection index
Standards
Wire feeder
DMU W500
Weight
Dimensions (l x b x h)
Motor rollers
Wire diameter range
Wire speed range
Spool diameter
26
16 kg
603 x 262 x 446 mm
4
0.6 to 1.6 mm
0-25 m/min
300 mm
18.5 A
28 A
15 - 420 A
15 - 500 A
420 A @ 60%
500 A @ 60%
350 A @ 100%
450 A @ 100%
738 x 273 x 521 mm
34 kg
40 kg
IP 23
EN 60974-1 / EN 60 974-10
Cooling Unit
COOLER III
Cooling power
Maximum pressure
Dimensions
Weight
1.3 kW
4.5 bar
720 x 280 x 270 mm
16 kg
* Eco Friendly Welding and Cutting.
This label is awarded by Air Liquide Welding to products that
contribute to a sustainable development and/or to ensure better
working conditions for welders.
The modular concept of CITOPULS III / CITOSTEEL III and CITOWAVE III
allows you to build the perfect configuration for your requirement.
420 A @ 40 %
500 A @ 60 %
CITOSTEEL III 420
CITOSTEEL III 520
W000383618
W000383619
CITOPULS III 420
CITOPULS III 520
W000383663
W000383664
2016-399
2016-398
2016-352
420 A @ 60 %
500 A @ 60 %
420 A @ 60 %
500 A @ 60 %
CITOWAVE III 420
CITOWAVE III 520
W000384991
W000384992
Trolley for installation
Trolley
on site
2011-377
2015-030
2016-378
2016-404
2016-382
Wire feeders
2016-350
2016-360
2016-351
Power sources
DMU P400 Standard
W000275266
DMU P500 Expert
W000275267
DMU W500 For WAVE III
W000371926
TROLLEY ON SITE
100 programs - Blocking of welding parameters
Digital display
W000372274
TROLLEY II
Cooling unit
W000383000
W000273516
W000376539
COOLER III
Safety device for COOLER III
Support
for wire feeder
in vertical suspension
Trolley for
wire feeder
TROLLEY WF II
2008-778
Remote control
W000273134
Length
Air
2m
5m
10 m
15 m
25 m
30 m
40 m
50 m
W000275894
W000275895
W000275896
W000275897
W000276901
W000371246
W000371245
W000371244
Water
Standard
Aluminium
W000275898 W000371044
W000275899 W000371045
W000275900 W000371175
W000275901 W000371174
W000276902 W000371239
-
2010-462
Harnesses
Push-pull Puls III
electronic circuit
Allowing to connect a
push-pull torch or gun.
RC SIMPLE (10 m)
W000275904
Flowmeter
to mesure
gas flowrate
W000275905
W000386223
Anti-dust filter
for power source
protection
New model
W000373703
Aluminium welding kit
2011-458
RC JOB II (10 m)
W000275908
2011-113
2010-464_ret
W000377985
W000277622
ALUKIT DVU 1.0 -1.2
W000277623
ALUKIT DVU 1.2-1.6
A composition of wire guides and rollers for
perfect aluminium welding.
27
BEST OF EXPORT Oerlikon GB 2016.indd 27
24/06/2016 11:22
CITORCH M
A complete range of MIG/MAG torches
■ Extra flexible coaxial cable with ultra-resistant elastomer outer
■ Ergonomic handle with ball joint for perfect handling
■ Long lasting active part with few parts (monobloc nozzle)
CITORCH M
Duty cycle
at 60%
Wire
diameter
3 m long
4 m long
CITORCH
M141 T
2006-945
Designation
Cat. nr
5 m long
Air cooled standard torches
0.6 - 0.8 mm
W000275422 W000275423
(1.0 mm)
-
CITORCH
M181 T
0.8 - 1.0 mm
W000345085 W000345086 W000345087
(1.2 mm)
1.0 - 1.2 mm
W000345091 W000345092 W000345093
(1.6 mm)
2009-466
0.6 - 1.0 mm W000275424 W000275425 W000275426
1.0 - 1.6 mm W000345097 W000345098 W000345099
2006-229
CITORCH M141 T 160 A (CO2)
(turnable neck)
150 A (Ar+CO2)
CITORCH M181 T 200 A (CO2)
(turnable neck)
180 A (Ar+CO2)
270 A (CO2)
CITORCH M241
250 A (Ar+CO2)
350 A (CO2)
CITORCH M341
320 A (Ar+CO2)
420 A (CO2)
CITORCH M441
380 A (Ar+CO2)
CITORCH
M241
CITORCH MW
Duty cycle
at 100%
Wire
diameter
Cat. nr
3 m long
4 m long
5 m long
Water cooled standard torches
0.8 - 1.0 mm
W000345088 W000345089 W000345090
(1.2 mm)
1.0 - 1.2 mm
W000345094 W000345095 W000345096
(1.6 mm)
CITORCH
M241W
2006-946
270 A (CO2)
250 A (Ar+CO2)
350 A (CO2)
320 A (Ar+CO2)
420 A (CO2)
380 A (Ar+CO2)
500 A (CO2)
450 A (Ar+CO2)
550 A (CO2)
500 A (Ar+CO2)
1.0 - 1.6 mm W000345100 W000345101 W000345102
CITORCH
M441W
1.0 - 1.6 mm W000274868 W000274869 W000274870
1.2- 3.2 mm
-
W000274871
-
2007-390
CITORCH
M241W
CITORCH
M341W
CITORCH
M441W
CITORCH
M450W
PROMIG
M501W
2009-277
Designation
PROMIG
M501W
2009-278
CITORCH
M450W
28
See also our WST2
range for fume extraction
torches in page 63.
DIGITORCH P
DIGITORCH II E
(double potmeter for parameters’ setting)
(double button for parameters’ setting)
for CITOSTEEL and CITOPULS power sources
for CITOWAVE II / III power sources
Designation
Cat. nr
Wire
diameter
Duty cycle
Designation
4 m long
Wire
diameter
Duty cycle
Air cooled torches (duty cycle 60%)
DIGITORCH
P 341
350 A (CO2)
320 A (Ar+CO2)
1.0 - 1.2 mm (1.6
mm)
Cat. nr
4 m long
CITOWAVE II / III
Air cooled torches (duty cycle 60%)
W000385014
DIGITORCH II
E 341
Water cooled torches (duty cycle 100%)
350 A (CO2)
320 A (Ar+CO2)
1.0 - 1.2 mm
(1.6 mm)
W000373831
Water cooled torches (duty cycle 100%)
DIGITORCH
P 341 W
350 A (CO2)
320 A (Ar+CO2)
1.0 - 1.2 mm
(1.6 mm)
W000345016
420 A (CO2)
380 A (Ar+CO2)
DIGITORCH II
E 341W
350 A (CO2)
320 A (Ar+CO2)
1.0 - 1.2 mm
(1.6 mm)
W000373832
DIGITORCH
P 441 W
1.0 - 1.6 mm
W000345018
DIGITORCH II
E 441W
420 A (CO2)
380 A (Ar+CO2)
1.0 - 1.6 mm
W000373833
DIGITORCH II
E 450W
500 A (CO2)
450 A (Ar+CO2)
1.0 - 1.6 mm
W000379190
DIGITORCH P 341
2007-383
2007-382
2006-956
2007-381
DIGITORCH II E 341
DIGITORCH P 341 W
DIGITORCH II E 341W
PUSH-PULL torches and guns
Designation
Duty cycle
Wire
diameter
(mm)
8 m long
15 m long
-
W000275992
Cat. nr
Air cooled
ALUTORCH NG 342
300 A @ 40%
(Ar+CO2)
1.0 - 1.2
PROMIG PP 341
(neck 45°)
350 A @ 60%
(CO2)
1.0 - 1.6
W000385860
2016-007
Water cooled
450 A @ 60%
(Ar+CO2)
PROMIG PP 441W
(neck 45°)
420 A @ 60%
(CO2)
W000267607
(neck 45°)
W000271006
(neck 0°)
1.0 - 1.6
(NECK 45°)
PROMIG PP 441W
(NECK 45°)
2010-302
DIGITORCH PP 451 W
PROMIG PP 341
-
W000385861*
W000385862
1.0 - 1.6 W000385863*
-
W000385864**
ALUTORCH NG 342
PROMIG PP 341 and 441W are dedicated to welding of light
alloys wires. They come as standard with a 45° neck. To be
transformed in 0° neck, additional parts are to be ordered:
■ For PROMIG PP 341:
Neck 0°: W000385867
Internal liner 0°:
W000385869
■ For PROMIG PP 441W:
Neck 0°: W000385868
Internal liner 0°:
W000385871
2007-957
* With potentiometer - ** With remote control and digital display.
DIGITORCH
PP 451W
See also our WST2
range for fume extraction
torches in page 63.
29
WMT2 torches
Product advantages:
20570028R
■ Wear parts compatible with the most common standard in Europe
■ Easy pivoting handle
■ Complete range
Air cooled standard torches
Designation
WMT2 15A
WMT2 25A
WMT2 36A
Duty cycle
at 60%
Wire
diameter
Cat. nr
3 m long
4 m long
5 m long
180 A (CO2)
0.6 - 1.0 mm W000277445 W000277447
150 A (Ar+CO2)
230 A (CO2)
0.8 - 1.6 mm W000277473 W000277474 W000277475
200 A (Ar+CO2)
340 A (CO2)
0.8 - 1.6 mm W000277482 W000277483 W000277484
330 A (Ar+CO2)
3 m long
4 m long
Water cooled standard torches
Designation
WMT2 401W
WMT2 500W
WMT2 500WL*
Duty cycle
at 100%
Wire
diameter
Cat. nr
5 m long
460 A (CO2)
1.0 - 1.6 mm W000370826 W000370827 W000370828
350 A (Ar+CO2)
W000277492 W000277493 W000277494
500 A (CO2)
1.0 - 1.6 mm
450 A (Ar+CO2)
W000277533 W000277534 W000277535
*long swan neck
WMT2 36A
30
WMT2 401W
2012-516
WMT2 500W
2014-673
2014-666
WMT2 25A
2014-669
WMT2 15A
Water cooled standard torches
2014-663
Air cooled standard torches
See also our WST2
range for fume extraction
torches in page 63.
The products of the CITOCUT range are designed for excellent quality cuts and reliability.
Range covers up to 40 mm thick plates.
CITOCUT 10 KT, portable solution
with integrated air compressor.
CITOCUT 10i, the alliance of light
weight and sturdy conception.
FEATURES & BENEFITS
FEATURES & BENEFITS
■ Non HF striking
■ Drag cutting
■ Digital display
■ Severance cut:
10 mm
■ Non HF striking
■ Drag cutting
■ Digital display
■ Severance cut:
10 mm
Maintenance box
• For CPT 800 torch
of the CITOCUT 10i
W000277610
2010-063
2010-210
CITOCUT 10i
2011-008
CITOCUT 10 KT
2011-008
Maintenance box
• For CPT 800 torch of
the CITOCUT 10 KT
W000277610
CITOCUT 20iC
CITOCUT 20i, powerful and versatile.
2013-672
FEATURES & BENEFITS
■ Digital display
■ Non HF striking
■ Drag and distance cutting
■ Grid and gouging mode
■ Autolink 230 V - 400 V
■ Severance cut: 25 mm
Supply voltage
Input current
Cutting current
40 °C duty cycle
Quality cut
Weight
Torch
Cat. number
2011-009
Maintenance box
• For CITORCH P40C
W000277615
CITOCUT 10 KT
CITOCUT 10i
CITOCUT 20iC
230 V single phase
11.5 A (effective)
10 - 30 A
20 A @ 60%
8 mm
16 kg
CPT 800 - 4 m
230 V single phase
14 A (effective)
10 - 30 A
25 A @ 60%
8 mm
8 kg
CPT 800 - 4 m
W000271551 (power source + torch)
W000277618 (power source + torch)
230 - 400 V three phase Autolink
15.5 A (maxi)
20 - 65 A
60 A @ 50%
20 mm
25 kg
CITORCH P 40C - 6 m or PT 100C 6 m
W000372415 (power source)
W000278170 (PT 100C torch)
W000274856 (CITORCH P40C)
These equipment are designed for industrial and professional use only and does not comply with EN 61000-3-2/12. If it is connected to a public low voltage system, it is the responsibility of the installer or user
of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be connected. (See also the instruction manual)
31
CITOCUT 40i C
2011-010
2011-010
Maintenance box
FEATURES & BENEFITS
■ Digital display
and control
of the parameters
■ 3 cutting modes:
cutting - grid - gouging
■ Quick connection torch
2011-441
werful
Light / Po gged
/ Ru
Versatile
CITOCUT 25 C
CITOCUT 40 C
FEATURES & BENEFITS
FEATURES & BENEFITS
■ 4 wheels and a strong design for
intensive industrial use
■ Central connector for easy
connection
■ High cutting capacity: 40 mm with 120 A
■ High duty cycle: 50% at 40 °C
■ IP 23 S for workshop and on-site applications
■ 4 steps for current setting according to the thickness to be cut
■ High quality cut with drag cutting nozzles
■ Delivered ready to use with 6 m torch, air hose, primary cable, earth cable,
starting set of wear parts
■ Central connector
for easy
connection
2015-795
• For CITORCH P40C
W000277615
CITOCUT 40i C
Power supply
Primary consumption maximum
Cutting current
Duty cycle at 40 °C
Severance cut
Net weight
Torch
Cat. nr
32
400 V three-phase
40,3 A
10 - 120 A
120 A @ 60%
40 mm
35 kg
W000273829 (power source)
W000278170 (PT 100C torch)
W000274856 (CITORCH P40C torch)
Maintenance box
2011-010
2011-010
Maintenance box
2011-010
2011-010
■ Powerfull: 80 A with 40%
at 40 °C duty cycle
■ 3 steps to simplify the selection
of the desired current according
to the thickness to be cut
■ Maximum quality and safety
with the patented torch
■ Drag cutting up
to 8 mm for
maximum quality
■ Delivered ready
to use
■ IP 23 S for use
on open sites
2015-794
■ Superior quality cut
up to 40 mm
■ Compact design
■ Gouging position
■ Automatic re-start
■ Automatic version
• For CITORCH P40C
W000277615
• For CITORCH P40C
W000277615
CITOCUT 25 C
CITOCUT 40 C
220 - 230 - 380 - 400 V three-phase
49 - 47 - 28,5 - 27 A
74 -71 - 42 - 40 A
30 - 50 - 80 A
30 - 50 - 85 -120 A
80 A @ 40%
120 A @ 50%
25 mm
40 mm
80 kg
125 kg
CITORCH P 40 C - 6 m or PT 100C - 6 m
W000377627 (power source)
W000377628 (power source)
W000278170 (PT 100C torch)
W000278170 (PT 100C torch)
W000274856 (CITORCH P40C torch)
W000274856 (CITORCH P40C torch)
These equipment are designed for industrial and professional use only and does not comply with EN 61000-3-2/12.If it is connected to a public low voltage system, it is the responsibility of the installer
or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that the equipment may be connected. (See also the instruction manual)
MMA WELDING ELECTRODES
All positions rutile electrode
Classification
EN ISO 2560 A
E 380 RC 11
AWS SFA-5.1
E 6013
OVERCORD R12
Features:
Rutile coated MMA electrode for all positional welding.
Easy to use and tolerant of dirty
To order
or poorly prepared base plates.
Ø Length Quant. / Quant.
Box
/ Carton
(mm) (mm)
Efficiency 100%.
Current condition:
■ Direct current with - polarity
to electrode.
■ Alternating
current:
Uo > 50 V.
2.0
2.5
3.2
3.2 L
4.0
350
350
350
450
350
Cat. nr
960
780
480
480
315
W000380242
W000258223
W000258224
W000258225
W000258226
38 electrodes
24 electrodes
W000287127
W000287128
160
260
160
160
105
In plastic pack
2.5
3.2
350
Excellent aspect rutile electrode
Classification
EN ISO 2560 A
E 420 RR 12
AWS SFA-5.1
E 6013
FINCORD
Features:
Rutile coated MMA electrode with a good bead aspect,
used for a wide variety of applications. Suitable for all
positional welding except vertical down. Efficiency 100%.
Current condition:
■ Direct current with - polarity
to electrode.
■ Alternating
current:
Uo > 48 V.
To order
Ø Length Quant. / Quant.
Box
/ Carton
(mm) (mm)
2.0
350
170
1020
2.5
350
210
630
3.2
350
125
375
3.2 L 450
118
354
4.0
350
78
234
Cat. nr
W000380798
W000287201
W000287202
W000287203
W000287204
Basic electrode
Standard cardboard packaging
SUPERCITO 7018 S
Features:
Basic coated MMA electrode for
producing crack-free and tough
welding joints. Good welding
characteristics, suitable for root
passes and positional welding,
welds are X-ray quality. The weld
metal has good ISO-V toughness
to -50 °C. Suitable forunalloyed
steels with low purity or higher
carbon content <0.4% C, and for
buffer layers. Very low hydrogen
content after re-drying.
Classification
EN ISO 2560 A
E 42 5 B 32 H5
AWS SFA-5.1
E 7018-1 H4
Also available in MICRODRY
packaging, a multilayer
film (mix of plastic and
aluminium) which provides
a perfect barrier against
humidity.
Therefore no rebacking, no
holding oven and no quiver
are necessary.
The electrodes can be used
right after opening and
during 8h.
Current condition:
■ Direct current
with + polarity
to electrode.
■ Alternating current:
Uo > 70 V.
Ø Length Quant. / Quant.
Box
/ Carton
(mm) (mm)
2.5
350
195
585
3.2
350
120
360
3.2 L 450
120
360
4.0
450
85
255
5.0
450
55
165
Cat. nr
W000258277
W000258278
W000258279
W000258280
W000258281
MICRODRY packaging
Ø Length Quant./ Quant.
bag
/ Carton
(mm) (mm)
2.5
350
28
448
3.2
350
22
352
3.2
450
22
352
4.0
450
18
288
5.0
450
8
128
Cat. nr
W000385802
W000385803
W000385804
W000385805
W000385806
Rutile coated electrodes for stainless steels
SUPRANOX 308L
Classification
EN 3581-A
E19 9 L R 12
AWS A-5.4
E308L-17
Features:
SUPRANOX 308L is a rutile coated MMA electrode
for welding similar austenitic stainless Cr-Ni steels,
also suitable for ferritic stainless Cr-steels. Metal
transfer in fine droplets and nearly spatter free, the slag
is generally self releasing from finely-rippled concave
fillet welds with an excellent bead
Standard cardboard packaging
surface appearance. Good striking
Ø Length Quant. Quant.
and restriking. Under wet corrosive
Cat. nr
(mm) (mm) / Box / Carton
conditions, suitable for operating
W000375882
2.0
300
310
930
temperatures <350°C,
W000375886
2.5
300
190
570
non-scaling <800°C.
W000375888
3.2
350
120
360
Current condition:
■ Direct current with
+ polarity to electrode.
■ Alternating
current: Uo > 50 V.
4.0
5.0
350
350
80
50
240
150
W000375891
W000375893
MEDIUM DRY packaging
Ø Length Quant.
(mm) (mm) / Box
2.0
300
150
2.5
300
90
3.2
350
55
4.0
350
40
Quant.
/ Carton
Cat. nr
900
540
330
240
W000375874
W000375875
W000375877
W000375879
SUPRANOX 316L
Classification
EN 3581-A
E 19 12 3 LR 12
AWS A-5.4
E316L-17
Features:
SUPRANOX 316L is a rutile coated MMA electrode
for welding similar austenitic Cr-Ni-Mo steels.
The weld metal transfer is in fine
Standard cardboard packaging
droplets and nearly spatter
Ø Length Quant. Quant.
free, depositing finely rippled
Cat. nr
(mm) (mm) / Box / Carton
concave fillet welds with an
W000375872
2.0
300
310
930
outstanding weld bead aspect
W000375873
2.5
300
190
570
and generally self-releasing slag.
W000375876
3.2
350
120
360
W000375878
4.0
350
80
240
Good striking and restriking.
W000375881
5.0
350
50
150
Under wet corrosive conditions
suitable for operating
Small plastic case packaging
temperatures <400°C.
W000375945
2.5
300
30 electrodes
Current condition:
■ Direct current with
+ polarity to electrode.
■ Alternating current:
Uo > 60 V.
3.2
350
20 electrodes
W000375946
MEDIUM DRY packaging
Ø Length Quant.
(mm) (mm) / Box
1.6
300
250
2.0
300
150
2.5
300
90
3.2
350
55
4.0
350
40
Quant.
/ Carton
Cat. nr
1 500
900
540
330
240
W000375922
W000375923
W000375924
W000375925
W000375865
33
MMA WELDING ELECTRODES
Electrode for repair and assembly
SUPRANOX RS 312
Features:
DW 312 is a rutile coated MMA electrode for joining difficult-to-weld
steels, dissimilar steels and for wear-resistant surfacing and buffer
layers, the deposit hardness is ~220 HB. Applications include repair and
maintenance welding on machines, power transmission equipment and
tools. The microstructure of the higher strength weld metal consists of
ferritic-austenitic Cr-Ni steel, with ~50% delta-ferrite, and is highly crack
resistant, rust-proof and non-scaling <1100 °C. Very good weldability,
weld metal transfer is in fine droplets with easy slag removal, producing
a good weld bead shape.
Classification
EN 3581-A
EZ (29 9) R12
AWS A-5.4
~E312-16
MEDIUM DRY packaging
Ø Length Quant. Quant.
(mm) (mm) / VPMD / Carton
2.5
300
95
570
3.2
350
55
330
4.0
350
35
210
Cat. nr
W000258455
W000258456
W000258457
Current condition:
■ Direct current with
+ polarity to electrode.
■ Alternating current:
Uo > 55 V.
Small plastic case packaging
Classification
EN ISO 1071
E C Ni Fe Ci 1
AWS SFA-5.15
E Ni Fe Ci
MEDIUM DRY packaging
2.5
3.2
300
350
W000287909
W000287910
28 electrodes
15 electrodes
Electrode for joining and surfacing cast iron
Features:
SUPERFONTE NiFe is a basic-graphite coated MMA electrodes with nickeliron core wire, for joining and surfacing of cast iron without preheating
or with a minimum of < 300°C, «cast iron cold welding». Higher weld
metal strength than SUPERFONTE Ni. Used for welding applications on
new cast-iron components made of globular gray-cast iron (GJS/GGG)
and dissimilar joining of GJS to steel. Suitable for cast irons with globular
graphite (GJS), black-heart cast iron (GJMB), white-heart cast iron
(GJMW), austenitic cast iron and dissimilar joints to steel. Easy striking,
stable arc, finely-rippled bead surface. Weld at low heat input with short
beads, ~10 to 30 mm, and hammer peen. Weld metal can be machined.
Ø Length Quant. Quant.
(mm) (mm) / VPMD / Carton
2.5
350
115
690
3.2
350
70
420
Current condition:
■ Direct current with
+ polarity to electrode.
■ Alternating current:
Uo > 50 V.
Small plastic case packaging
2.5
3.2
350
W000288116
W000288117
26 electrodes
12 electrodes
DRY PACK
MEDIUM DRY
2016-169
A safer and more economic way
for your MMA welding applications.
Cat. nr
W000258513
W000258514
2013-072
SUPERFONTE NiFe
The coated electrodes are packaged
in a multilayer film (mix of plastic and
aluminium) which provides a perfect
barrier against humidity.
MICRO DRY
Therefore no rebacking, no holding
oven and no quiver are necessary.
The electrodes can be used right after
opening and during 8 h.
According your needs we can provide
micro or medium packaging. Choose
your adapted packaging according
number of used electrodes per day.
MICRO DRY
MEDIUM DRY
Diameter
Number *
of electrode
per box
Diameter
Number *
of electrode
per box
2.0
2.5
3.2
4.0
5.0
45
28
22
18
8
2.0
2.5
3.2
4.0
5.0
150
90
55
40
22
* Depends on the coating diameter. The numbers are only indications.
34
MASSIVE WIRES FOR MIG/MAG WELDING
Welding of unalloyed and low alloyed steels
Classification
AWS A 5-18
ER 70S-6
EN ISO 14341-A
G42 4 M G3 Si1
CARBOFIL 1
CARBOFIL 1 GOLD
Shielding gas (according EN ISO 14175): M21 or C1.
Features:
To order:
CARBOFIL 1 is a copper coated type
Layer Weight
Ø
Cat. nr*
solid MAG welding wire supplied both
(mm) Spool wound
(kg)
random and precision layer wound,
W000282583
0.6 S 300
SR
15
W000282587
S 200
SR
5
depositing C-1.1% Mn weld metal,
0.8 B 300
SJ
16 C 30 010 192
for welding a wide range of mild and
W000282589
S 300
SR
15
C-Mn structural steels. CARBOFIL 1 is a
B 300
SJ
16 C 30 010 193
welding wire electrode used forgeneral
1.0 BS 300
SJ
16 C 30 010 111
W000282601
S 300
SR
16
applications in both single and multipass
B 300
SJ
16 C 30 010 194
welding. Especially suited for sheet
1.2
BS 300
SJ
16 C 30 010 112
metal applications where smooth weld
W000282626
1.6 B 300
SJ
16
beads are required. Weld metal impact
* others packaging available (consult us)
toughness properties are down to -40 °C. SR: Precision layer wound - SJ: Random layer wound
Shielding gas (according EN ISO 14175): M21 or C1.
Features:
To order:
CARBOFIL 1 GOLD is a special bronzeØ
Layer Weight
Cat. nr*
coated type solid MAG welding wire,
(mm) Spool wound (kg)
supplied both random and precision layer
1.0 B 300
SJ
16 W000282709
wound, depositing C-1.1%Mn weld metal,
1.2 B 300
SJ
16 W000282713
for welding a wide range of mild and
* others packaging available (consult us)
C-Mn structural steels. CARBOFIL 1 GOLD SJ: Random layer wound
has a very good arc stability, excellent
feeding properties, low spatter during
welding, good start and stop characteristics with a low consumption of contact tips.
Applications are the same as CARBOFIL 1, but especially suitable for welding in spray
arc. The «GOLD” coating is produced with MHC technology, which guarantee a low
content of elements associated with arc instability.
Welding of low alloyed steels HYSS
Welding of low alloyed steels. Weathering steels
CARBOFIL NiMoCr
CARBOFIL NiCu
Shielding gas (according EN ISO 14175): M21 or C1.
Features:
Classification
CARBOFIL NiMoCr is a copper coated
GMn3Ni1CrMo/ER110S-G type
AWS A 5-28
solid MAG welding wire, depositing
ER 110 S-G
C-1.2Mn0.25Cr1.5Ni0.25Mo weld metal,
EN ISO 16834-A
G 69 4 M21 Mn3Ni1CrMo
used for the welding of high tensile strength
steels and type Tl-HY100 steels. Suitable for
use with Ar-CO2 mix shielding gases.
CARBOFIL NiMoCr is used to weld <690 MPa
yield strength steels with excellent
mechanical properties and also for low
To order:
temperature applications down to
Ø
Layer Weight
Cat. nr*
-40 °C. Low heat inputs are
(mm) Spool wound
(kg)
recommended to obtain optimum joint
W000282926
BS
SJ
16
1.0
W000282929
1.2 300
SJ
16
mechanical properties. Solid wire with
excellent mechanical characteristics for * others packaging available (consult us)
SJ: Random layer wound
use on high strength steels.
Shielding gas (according EN ISO 14175): M21 or C1.
Features:
CARBOFIL NiCu is a copper coated ERS0S-G type solid MAG
welding wire, depositing a C-1Mn0.SNi0.4Cu for the welding
of weathering steels such as COR-TEN, Patinax, etc. Suitable
for welding with CO2 or Ar+CO2 mixed shielding gases.
CARBOFIL NiCu is suitable for welding a range of structural weather resistant steels
in applications such as bridge fabrication, exposed frame structures, transmission
towers, barriers, ducting, chimneys, shields and inner exhaust systems. Due to the
alloying elements, CARBOFIL NiCu can also be used for the welding of high yield
strength steels. The addition of Ni and
Cu to the weld metal provides increased To order:
Ø
Layer Weight
resistance to atmospheric corrosion
Cat. nr*
(mm) Spool wound
(kg)
compared to conventional C-Mn steels.
W000282861
0.8
SJ
16
BS
Solid wire for welding type CORTEN
W000282863
1.0
SJ
16
300
carbon steels with gas shielding.
W000282865
1.2
SJ
16
Excellent mechanical characteristics
* others packaging available (consult us)
SJ: Random layer wound
and resistance to corrosion.
Classification
AWS A 5-28
ER 80 S-G
EN ISO 14341-A
G42 4 M21 Z
EN ISO 14341-A
G42 3 C12 Z
Welding of stainless and special steels
INERTFIL 308LSi
Classification
Shielding gas (according EN ISO 14175): M13.
AWS A 5-9
ER 308L Si
Features:
EN ISO 14343-A
INERTFIL 308LSi is a solid MAG welding wire, supplied
G 19 9L Si
precision layer wound, depositing a low C-19Cr9Ni weld
metal. INERTFIL 308LSi is used for welding of 304 and
304L grade stainless steel. The weld metal provides good corrosion
resistance to intergranular attack from a range of liquid media. It is
used for a wide range of applications including pipework and plate
fabrication, vessel production etc. The
To order:
low carbon reduces the propensity to
Ø
Layer Weight
Cat. nr*
intergranular carbide precipitation, which (mm) Spool wound (kg)
increases the resistance to intergranular
W000283002
0.8
SJ
15
W000283007
BS
1.0
SJ
15
corrosion without the use of stabilizers.
W000283013
1.2 300
SJ
15
The increased silicon content results
W000283018
1.6
SJ
15
in increased weld pool fluidity to give a
* others packaging available (consult us)
smooth deposit appearance.
SJ: Random layer wound
INERTFIL 316LSi
Classification
Shielding gas (according EN ISO 14175): M13.
AWS A 5-9
ER 316L Si
Features:
EN ISO 14343-A
INERTFIL 316LSi is a solid MAG welding wire, supplied
G 19 12 3 L Si
precision layer wound, depositing a low C-19Cr12Ni2.5Mo
weld metal. INERTFIL 316LSi is used for welding of 316
and 316L grade stainless steels, in a wide range of applications
including the fabrication of pipe and plate. The higher Si level
results in a smooth weld bead shape
To order:
and even appearance with excellent
Ø
Layer Weight
toe blending particularly in fillet welds.
Cat. nr*
(mm) Spool wound
(kg)
The weld metal has a high resistance
W000283055
0.6 S 200
SJ
5
to pitting and crevice corrosion by nonW000283060
SJ
15
0.8
W000283065
1.0
SJ
15
BS
oxidising acids. Used for applications
W000283070
1.2 300
SJ
15
with service temperatures <400°C.
W000283075
1.6
SJ
15
* others packaging available (consult us)
SJ: Random layer wound
35
MASSIVE WIRES FOR MIG/MAG WELDING
Stainless steel MIG wires
WL WIRE 308 LSi
WL WIRE 309 LSi
WL WIRE 316 LSi
To order:
To order:
To order:
Ø (mm) Spool Weight
Cat. nr*
W000283672
0.8
BS
15 kg W000283144
1.0
300
W000283146
1.2
Ø (mm) Spool Weight
Cat. nr*
W000283674
0.8
BS
15 kg W000283148
1.0
300
W000283150
1.2
Classification
AWS A 5-9
ER 308 L Si
* others packaging available (consult us)
Ø (mm) Spool Weight
Cat. nr*
W000283676
0.8
BS
15 kg W000283152
1.0
300
W000283154
1.2
Classification
AWS A 5-9
ER 309 L Si
* others packaging available (consult us)
Classification
AWS A 5-9
ER 316 L Si
* others packaging available (consult us)
Welding of aluminium and light alloys
ALUFIL AlMg5
ALUFIL AlMg4.5Mn
Shielding gas (according EN ISO 14175): I1.
Classification
Features:
AWS A 5-10
ALUFIL AlMg5 is a solid MlG welding wire, supplied
ER 5356
precision layer wound, depositing Al-5Mg weld metal. ALUFIL
EN 18273
AlMg5 is used for the welding of Al-Mg alloys and Al-Mg-Zn
S AI 5356
alloys. The wire is also suitable for the welding of dissimilar
aluminium alloy grades containing up to 5%Mg and components which are to be
subsequently anodised. ALUFIL AlMg5 is the most popular aluminium welding
wire, because of its high yield strength and high resistance to corrosion, including
seawater.
Shielding gas (according EN ISO 14175): I1.
Classification
Features:
AWS A 5-10
ALUFIL AlMg4.5Mn is a 5183 type aluminum solid MlG
ER 5183
welding wire, supplied precision layer wound, depositing AlEN ISO 18273
4.5Mg0.7Mn weld metal. Suitable for use with Ar, or Ar+He
S Al 5183
mixed shielding gases. ALUFIL AlMg4.5Mn is suitable for
the welding of sea- and other structures, where the strength, the toughness and
the corrosion resistance are the priorities. ALUFIL AlMg4.5Mn results the highest
strength in as welded condition. Due to the high Mg-content it is not applicable
for high temperature applications, because of the risk of stress corrosion. For
special request ALUFIL AlMg4.5Mn is available with GL (Germanischer Lloyd), LRS
(Lloyd’s Register) and RINA (Registro Italiano Navale) approvals.
To order:
Ø
(mm)
0.8
1.0
1.2
1.6
Spool
BS 300
Layer
wound
SJ
SJ
SJ
SJ
Weight
(kg)
7
7
7
7
Cat. nr*
To order:
W000283218
W000283221
W000283225
W000283229
Ø
(mm)
1.0
1.2
* others packaging available (consult us)
SJ: Random layer wound
Spool
BS 300
Layer
wound
SJ
SJ
Weight
(kg)
7
7
Cat. nr*
W000283200
W000283203
* others packaging available (consult us)
SJ: Random layer wound
Aluminium MIG wires
Hardfacing
WL WIRE AlSi5
WL WIRE AlMg5
INERTFIL 308LSi
To order:
To order:
Ø (mm) Spool Weight
Cat. nr*
W000283672
1.0
BS
7 kg W000283144
1.2
300
W000283146
1.6
Ø (mm) Spool Weight
Cat. nr*
W000283676
1.0
BS
7 kg W000283152
1.2
300
W000283154
1.6
Shielding gas (according EN ISO 14175): M20, M21, M24.
Features:
CARBOFIL A 600 is a copper
Classification
coated S Fe8 type solid MAG
EN 14700
welding wire, supplied precision
S Fe 8
layer wound, depositing a 0.5C
0.3Mn 2.5Si 9.0Cr weld metal. Suitable for use with
Ar+CO2 mixed shielding gases. CARBOFIL A 600 is
used for hard-surfacing applications where resistance to
abrasion is required. Typical applications are: excavator
parts, bucket edges, mining equipments. CARBOFIL A
600 weld deposits can be used at service temperatures
<450°C with a minimal loss of abrasion resistance.
The as deposited weld metal can be shaped or profiled
by grinding. Solid wires for hard-facings suitable for
restoring surfaces that are subject to abrasion.
Classification
AWS A 5-9
ER 4043
* others packaging available (consult us)
* others packaging available (consult us)
WL WIRE AlMg4.5Mn
To order:
Ø (mm) Spool Weight
Cat. nr*
W000283674
1.0
BS
7 kg W000283148
1.2
300
W000283150
1.6
* others packaging available (consult us)
Classification
AWS A 5-9
ER 5183
Classification
AWS A 5-9
ER 5356
To order:
Ø
Layer Weight
Cat. nr*
(mm) Spool wound
(kg)
W000283294
1.2 BS300
SJ
15
36
* others packaging available (consult us)
SJ: Random layer wound
FLUX CORED WIRES FOR MIG/MAG WELDING
Flux Cored Wire for MAG welding of carbon steels
FLUXOFIL M8
Shielding gas: M21 or C1.
CITOFLUX M60 A
Classification
AWS A 5-18
E 70C-3 MH4 and E 70C-3 CH4
EN ISO 17 632-A
T 46 2 MM 1 H5 and T 46 2 MC 1 H5
Features:
FLUXOFIL M8 is a seamless copper
coated metal cored wire with
outstanding welding characteristics
in short-arc and spray-arc ranges
To order:
depositing slag free weld metal.
Ø (mm)
Spool
Weight
Cat. nr
Almost spatter-free when welding
W000281001
1.0
in the spray-arc range.
BS
16 kg
W000281004
1.2
300
Good restriking, even with a cold
W000281011
1.6
wire tip, thus being suitable for
robotic applications. Characteristic features: high deposition rate and welding speed,
good side wall fusion, finely rippled welds, without undercut into the base metal,
even on contaminated or corroded metal surfaces. Little formation of silicates
on the weld surface, so multi-pass welds can made without inter-run cleaning.
Due to an easily controllable weld pool in the short-arc range, FLUXOFIL M8 is
well-suited for root- and positional welding and gap bridging.
FLUXOFIL 14 HD
Shielding gas: M21 or C1.
Classification
Features:
AWS A 5-20
FLUXOFIL 14 HD is a seamless
E 71T-1 MJ H4 / E71T-1C-H4
copper coated rutile flux cored
EN ISO 17 632-A
wire with an enhanced degree
T 46 2 P C 1 H5 with gas C1 and
T 46 3 P M 1 H5 with gas M21
of fill for gas-shielded metal arc
welding of unalloyed steels for
To order:
operating temperatures from
Ø (mm)
Spool
Weight
Cat. nr
-30 °C up to +450 °C.
W000281096
B200
5
Due to its easily controllable
1.0
W000281097
B300
16
weld pool, the welding
W000281098
B200
5
1.2
W000281099
B300
16
characteristics are outstanding.
W000281104
B200
5
It can be welded in all positions
1.6
W000281105
B300
16
with only one parameter setting
(24 V, wire feed 9 m/min, wire dia. 1,2 mm). The enhanced degree of filling results
in increased current carrying capacity and deposition rate, thus increasing welding
speed and leading to a saving of time and costs. Low spatter loss, easy slag
removal, smooth and finely rippled welds are produced without undercut into the
base metal. Preferably used under mixed gas. The use of CO2 is possible.
CITOFLUX B13-0
Shielding gas: Gasless.
Classification
AWS A 5-20
E71-T7
EN ISO 17 632-A
T 42 Z Y 1 H15
GASLESS
Features:
CITOFLUX B13-0 is self shielded flux cored
wire for welding in all positions. It is used
for on-site assembly of sheet
and plate metal or profile
To order:
sections (thickness 3 to 15mm),
Ø (mm)
for the spot welding of round bars
1.0
1.2
for reinforced concrete and for
1.6
joining galvanized parts.
Spool
S 200
BS
300
Weight
4.5 kg
16 kg
Shielding gas: M21.
Features:
CITOFLUX M60A is a metal cored wire
which produces a fine aspect to the weld
bead. High deposition rate and excellent
arc stability with no slag residue, suitable
for single and multipass automatic
welding. The main applications are
mechanical constructions and earth
moving equipment. Diffusible hydrogen
5 ml/100g max.
Classification
AWS A 5-18
E 70C-3 M H8 with gas M21
EN ISO 17 632-A
T 42 2 MM 1 H5 with gas M21
To order:
Ø (mm) Spool Weight
1.2
BS
16 kg
1.4
300
1.6
Cat. nr
W000281042
W000281044
W000281046
CITOFLUX ROO
Shielding gas: M21 or C1
Classification
Features:
AWS A 5-20
E 71T-1C-H4 / E 71T-1M-JH4
CITOFLUX R00 is a folded rutile
EN ISO 17 632-A
flux-cored wire for gas-shielded
T 42 2 P C1 H5 (with gas C1)
metal arc welding of unalloyed
T 42 3 P M1 H5 (with gas M21)
steels for operating temperatures
from -30 °C to +450 °C in all
To order:
welding positions. The weld pool
Ø (mm)
Spool
Weight
Cat. nr
is easily controllable with
W000281145
1.0
B300
16
outstanding welding properties.
W000281146
S200
5
The enhanced fillig results in
1.2
W000281147
B300
16
increased current carrying
W000281148
1.6
B300
16
capacity and hence deposition rate,
thus essentially increasing welding speed, leading to savings of time and costs.
Low spatter loss and easy slag removal result in smooth and finely rippled welds
without undercut. Can be used in manual and fully mechanised processes, very
well suited for use on ceramic backing. Preferably used under mixed gas.
The use of CO2 is possible.
CITOFLUX GALVA
Shielding gas: M21.
Classification
AWS A 5-18
E 70 C GS
EN ISO 17 632-A
T 3T Z MM1 H15
Features:
CITOFLUX GALVA is a metal cored wire
suitable for manual or automatic, single-pass
welding of galvanised steels or primed plates
To order:
(0,8 to 4 mm). Low spatter level and excellent
Ø (mm) Spool Weight
Cat. nr
bead appearance. Used with spray arc with
W000281064
1.0
BS
16 kg
negative-poled flux-cored wire electrode
300
W000281065
1.2
(direct current, negative polarity).
There is a limited oxidation zone around the weld bead. The main applications
are in the car industry, shipyards and for air conditioning equipment.
Cat. nr
W000281393
W000281394
W000281395
37
FLUX CORED WIRES FOR MIG/MAG WELDING
Flux Cored Wire for welding of austenitic stainless steels
FLUXINOX 308L
Shielding gas: M21 or C1.
FLUXINOX 316L
Classification
AWS A 5-22
E 308L T0-4 and E308LT0-1
EN ISO 17 633-A
T 19 9 LRM 3 / T 19 9 LRC 3
Features:
FLUXINOX 308L is an alloyed rutile flux
cored wire for the welding of unstabilized
and stabilized corrosion resistant
Cr Ni-steels. Suitable for operating
To order:
temperatures up to 350 °C,
Ø (mm)
Spool
Weight
non-scaling up to approximately
S 200
4,5 kg
800 °C. FLUXOFIL 308 L features
1.2
BS 300
15 kg
outstanding, almost spatter-free,
welding properties. Very easy slag removal from fillet welds.
Flat and smooth weld beads without undercut.
Cat. nr
W000281256
W000281257
Shielding gas: M21 or C1.
Classification
Features:
AWS A 5-22
FLUXINOX 316L is an alloyed rutile
E 308L T0-4 and E308LT0-1
flux cored wire for the welding of
EN ISO 17 633-A
unstabilized and stabilized corrosion
T 19 12 3 LRM 3 / T 19 12 3 LRC 3
resistant Cr Ni Mo-steels. The weld
metal is resistant to intergranular
To order:
corrosion up to 400 °C and
Ø (mm)
Spool
Weight
Cat. nr
non-scaling up to 800 °C.
W000281273
S 200
4,5 kg
1.2
FLUXINOX 316L exhibits
W000281274
BS 300
15 kg
outstanding, almost spatter-free,
welding properties. Very easy slag removal from fillet welds, even in acute angles.
The weld beads produced are finely rippled and without undercut.
Due to only slight discolouration of the welds, pickling costs can minimised.
RODS FOR TIG WELDING
TIG welding of carbon steels
CARBOROD 1
To order:
Shielding gas according EN ISO 14175: I1.
Features:
CARBOROD 1 is suitable for TIG welding of mild and C-Mn steels. and is generally
used for the root pass and to support welding when no back pass is possible.
Excellent mechanical and toughness properties for low temperature applications,
down to -50 °C.
Classification
AWS A 5-18
ER 70S-6
EN ISO 636-A
W42 4 W3Si1
Ø
(mm)
1.6
2.0
2.4
3.2
Long.
(mm)
1000
1000
1000
1000
Packaging
Tube
Tube
Tube
Tube
Weight
(kg)
5
5
5
5
Cat. nr
W000283322
W000283323
W000283324
W000283325
TIG welding of low alloyed steels
CARBOROD CrMo91
Shielding gas (according EN ISO 14175): I1.
Classification
AWS A 5-28
ER 90S-B9
EN ISO 21952-A
W CrMo91
Features:
CARBOROD CrMo91 is an uncoated WCrMo91/
ER90S-B9 type solid TIG welding rod for welding creep
resisting steels of the type 9Cr 1Mo
To order:
V Nb N. Suitable for use with Ar
Ø
Long. Packa- Weight
shielding gas. CARBOROD CrMo91
Cat. nr
(mm) (mm)
ging
(kg)
is especially designed for the ASTM
W000377654
1.6
1000
Tube
5
W000377655
2.4
1000
Tube
5
steels T91/P91. This product is
suitable for applications in longterm service at temperatures up to 650 °C. Improved creep strength is obtained
by the addition of nitrogen, niobium and vanadium.
38
CARBOROD CrMo92
Shielding gas (according EN ISO 14175): I1.
Features:
CARBOROD CrMo92 is an
Classification
uncoated W ZCrMoWVNb9 0.5 1.7/
AWS A 5-28
ER90S-B9 (mod.) type solid TIG
ER 90S-B9 (mod.)
welding rod depositing a nominal
EN ISO 21952-A
W ZCrMoCrMoWVNb 9 0.5 1.7
C-0.7Mn9Cr1.5W0.5MoNbN low
alloy steel weld metal. Suitable for
To order:
use with Ar shielding gas.
Ø
Long. Packa- Weight
CARBOROD CrMo92 is especially
Cat. nr
(mm) (mm)
ging
(kg)
designed for welding ASTM T92/
W000376270
1.6
1000
Tube
5
P92, NF 616 and X10CrWMoNb 9-2
W000376271
2.4
1000
Tube
5
creep resisting steels. Approved in
long-term service at temperatures <650°C. Improved creep strength is obtained
by the addition of tungsten, niobium, nitrogen and vanadium.
RODS FOR TIG WELDING
TIG welding and hardfacing of stainless steels and special steels
Shielding gas according EN ISO 14175: I1.
Classification
AWS A 5-9
ER 308L
EN ISO 14343-A
W 19 9L
Features:
INERTROD 308L is a TIG welding rod depositing
a low C-19Cr 9 Ni weld metal.
To order:
INERTROD 308L is used for the
Ø
Long. Packa- Weight
Cat. nr
welding of 304 and 304L grade
(mm)
(mm)
ging
(kg)
stainless steel. The weld metal has
W000283414
1.2
1000
Tube
5
W000283415
1.6
1000
Tube
5
good corrosion resistance properties,
W000283416
2.0
1000
Tube
5
including intergranular attack from
W000283417
2.4
1000
Tube
5
a range of liquid media at service
temperatures <300 °C. It is used for a wide range of applications including
pipework and plate fabrication, vessel production etc. Batch with controlled low
ferrite number is available for cryogenic applications. Low carbon reduces the
propensity to intergranular carbide precipitation, which increases the resistance
to intergranular corrosion without the use of stabilizers. ER 308L LSi version are
also available (consult us).
INERTROD 316L
Classification
AWS A 5-9
ER 316L
EN ISO 14343-A
W 19 12 3 L
Shielding gas according EN ISO 14175: I1.
Features:
INERTROD 316L is a TIG welding rod depositing
a low C-19Cr12Ni2.6Mo weld metal.
INERTROD 316L is used for the
To order:
welding of 316 and 316L grade
Ø
Long. Packa- Weight
Cat. nr
stainless steel. It is used for a wide
(mm)
(mm)
ging
(kg)
W000283450
1.2
1000
Tube
5
range of applications including
W000283451
1.6
1000
Tube
5
pipework and plate fabrication,
W000283452
2.0
1000
Tube
5
vessel production etc. Batch with
W000283453
2.4
1000
Tube
5
controlled low ferrite number
is available for cryogenic applications. The weld metal has good resistance
to crevice corrosion by oxidising acids. ER 316L LSi version are also available
(consult us).
2012-554
INERTROD 308L
Aluminium
m TIG rods
Stainless steel TIG rods
WL ROD 316L
To order:
Ø (mm)
1.2
1.6
2.0
2.4
Long. (mm)
1000
Weight (kg)
5
Cat. nr
W000274503
W000253606
W000253607
W000253608
Classification
AWS A 5-9
ER 316 L
WL ROD 308L
To order:
Ø (mm)
1.2
1.6
2.0
2.4
Long. (mm)
1000
Weight (kg)
5
Cat. nr
W000274504
W000253609
W000253610
W000253611
WL ROD AlSi5
To order:
Ø (mm)
2.0
2.4
3.2
Long. (mm)
Weight (kg)
1000
5
Cat. nr
W000283692
W000283693
W000283694
Classification
AWS A 5-9
ER 4043
Cat. nr
W000274505
W000283698
W000283699
W000283700
Classification
AWS A 5-9
ER 5356
WL ROD AlMg5
Classification
AWS A 5-9
ER 308 L
To order:
Ø (mm)
1.2
1.6
2.0
2.4
Long. (mm)
Weight (kg)
1000
5
WL ROD AlMg4.5Mn
To order:
Ø (mm)
2.0
2.4
3.2
Long. (mm)
Weight (kg)
1000
5
Cat. nr
W000283695
W000283696
W000283697
Classification
AWS A 5-9
ER 5183
Aluminium alloys welding
ALUROD AlMg5
Shielding gas according EN ISO 14175: I1.
Features:
ALUROD AlMg5 is a TlG welding rod depositing Al-5Mg weld metal.
ALUROD AlMg5 is used for the welding of Al-Mg alloys and Al-Mg-Zn alloys.
The rod is also suitable for the welding of dissimilar aluminium alloy grades
containing up to 5%Mg and components which are subsequently to be anodised.
ALUROD AlMg5 is the most widely used Al welding wire, because of the weld
metals high yield strength and high resistance to corrosion, including seawater.
To order:
Ø
(mm)
1,6
2,0
2,4
3,2
4,0
Long.
(mm)
1000
1000
1000
1000
1000
Packaging
Tube
Tube
Tube
Tube
Tube
Weight
(kg)
5
5
5
5
5
Cat. nr
W000283582
W000283583
W000283584
W000283585
W000283586
Classification
AWS A 5-10
ER 5356
EN 18273
S Al 5356
39
WIRES AND FLUXES FOR SAW-WELDING
OERLIKON SAW combinations, always the right solution.
For example:
OERLIKON SAW - Wires:
■ S355 with thickness > 20 mm:
■ Flux core
cored wires:
OE-SD3 / OP 121TT: best
mechanical properties in multirun
application.
FLUXOCORD 31HD - OP 121TTW:
equivalent however with higher
welding speed / deposit rate
■ Solid wire
wires
® Technology
FLU
- FLUXOCORD
optimal chemistry
for o
and mechanical properties
FLUXOCORD HD ® Technology
- FLU
higher efficiency
for h
■ S355 thin plates (5- 20 mm):
OE-S2 / OP 191 in single run.
Nice fillet welds. Ship yards,
& light steel construction.
■ S690QL:
FLUXOCORD 42 - OP 121TTW DRYBAG.
Best welding perfomance
with best mechanical properties.
Safe solution against cold
cracking risk.
OERLIKON SAW Flux:
■ Standard 25 kg poly-ethylene bag
(PEX0025)
■ Moisture resis
resistant 25 kg “DRYBAG”
(DRYX0025)
■ BIG-BAG bul
bulck packaging formats
OERLIKON SAW combinations have been designed to weld non-alloyed and low alloyed
steel grades in single run, 2-run or multi run technique. Also for wear and corrosion resistant
applications we have solutions with wire and strip and for higher efficiency there is the
possibility for a multi-wire process variant.
Consult your OERLIKON-distributor for additional and / or specific possibilites.
40
www.we
ldline-alw
.com
ELECTRODE HOLDERS
Screw type
STUBBY
Name
2004-215
1794-21
VESTALETTE
A
(@35%)
Ø Cable
(mm2)
Ø electrode
(mm)
250
400
500
500
35
50
95
95
4.0
6.3
8.0
8.0
VESTALETTE
STUBBY
MASTER
VESTALE
Cat. nr
W000010035
W000010036
W000010037
W000010038
0947-65
0947-68
MASTER
Weight
(g)
295
450
530
470
VESTALE
Lever type with opened head
CAIMAN
A
Ø Cable
(@35%) (mm2)
CAIMAN 200
200
25
CAIMAN 400
300
50
CAIMAN 600
400
70
SAMSON ECO 300
300
70
SAMSON ECO 500
500
95
Name
2004-648
2004-491
SAMSON
Ø electrode
(mm)
3.2
5.0
6.3
6.3
8.0
Weight
(g)
370
425
500
450
530
Cat. nr
W000010567
W000010568
W000010569
W000010622
W000010623
Lever type with closed head
COBRA
SEGURA
2004-647
2011-032
2004-493
Name
OPTIMUS
SEGURA 300
SEGURA 400
SEGURA 500
COBRA
OPTIMUS 300
OPTIMUS 400
OPTIMUS 500
A
(@35%)
300
300
400
300
300
400
500
Ø Cable
(mm2)
Ø electrode
(mm)
35
50
70
50
70
95
95
4.0
5.0
6.3
6.3
6.3
8.0
8.0
Weight
(g)
415
570
590
420
460
560
620
Cat. nr
W000010570
W000010571
W000010572
W000010039
W000010410
W000010411
W000010412
2009-163
Kit accessories for MMA welding
Kit
l max
at 35%
Electrode
holder
Cable
length
Earth
clamp
Cable
langth
Plug
diameter
Cat. nr
25C25
200 A
CAIMAN 200
3m
HIPPO 200
3m
9 mm
W000011138
25C25+
300 A
SEGURA 300
3m
HIPPO 400
2m
9 mm
W000260683
25C50
300 A
SEGURA 300
3m
HIPPO 400
3m
13 mm
W000260684
35C50
300 A
SEGURA 300
4m
HIPPO 400
4m
13 mm
W000011139
50C50
300 A
SEGURA 400
4m
HIPPO 400
4m
13 mm
W000260681
50C50+
400 A
SEGURA 600
4m
HIPPO 600
4m
13 mm
W000260682
41
CABLES AND CONNECTORS
Secondary cables
H01N2-E
H01N2-D
(extra flexible)
(flexible)
To order:
Cat. nr
Linear meter
16 mm2
25 mm2
35 mm2
50 mm2
70 mm2
95 mm2
120 mm2
130 A
172 A
216 A
273 A
340 A
412 A
480 A
Cat. nr
Linear meter
W000010137
W000010138
W000010139
W000010140
W000010141
W000010142
W000010143
16 mm2
25 mm2
35 mm2
50 mm2
70 mm2
95 mm2
130 A
172 A
216 A
273 A
340 A
412 A
W000260274
W000260275
W000260276
W000260277
W000260278
W000260279
2000-174
To order:
Cable connectors DINSE type
52
Diameter
Cable
Cat. nr
11 mm 0 - 25 mm2 W000010094
Classification
EN 60974-12
Cable connectors DINSE type
53
2007-7
2007-814
Push and
twist design
Diameter
14 mm
To order:
female
Cable
25 - 35 mm2
Cat. nr
W000010095
2007-754
Cat. nr
Linear meter
Description
male
2007-7
10 - 25 mm2
35 - 50 mm2
70 - 95 mm2
10 - 25 mm2
35 - 50 mm2
70 - 95 mm2
W000010559
W000010560
W000010561
W000010562
W000010563
W000010564
200 A
400 A
600 A
200 A
400 A
600 A
Diameter
14 mm
Cable
35 - 50 mm2
Cat. nr
W000010096
Diameter
16 mm
16 mm
Cable
50 - 70 mm2
70 - 100 mm2
Cat. nr
W000010640
W000335165
55
2007-7
Clamps for normal use
To order:
CROCODILE
300
CROCODILE
600
50 mm2
300 A
300 A
38
405
95 mm2
600 A
600 A
38
634
Customer’s
benefit
Brass clamps
Brass jaws
Very good
contact surface
CROCODILE
Cat. nr
W000010577
2007-756
Jaw
A
Weight
opening
(g)
(35%) (mm)
Description
W000010578
Clamps for heavy duty use
To order:
42
Customer’s benefit
Cat. nr
MUSCLOR 300
MUSCLOR 600
50 mm2
95 mm2
200 A
400 A
300 A
500 A
38
38
480
762
Heavy duty brass clamps, powerful
jaws giving excellent grip.
W000010583
W000010584
DRAGON 600
95 mm2
600 A
600 A
-
816
Brass jaws, rubber sheath
cable protection. Screw tightening
giving excellent grip.
W000010582
MUSCLOR
2004-638
A
Weight
Jaw
(35%) opening (mm)
(g)
Description
www.we
ldline-alw
.com
PORTABLE QUIVERS
WELDRY 372 N INOX
They preserve the electrodes from
moisture avoiding hydrogen
inclusion in the welding joint.
Our portable quivers are provided
with a handle useful for easy
transportation.
They also contain an extractable
basket that avoids waste of heat.
Technical data
Capacity (n. of electrodes)
WELDRY 372 N - INOX
100 electrodes Ø 3,25 mm
Temperature regulation thermostat
Up to 120 °C
Power
0,230 kW
Capacity
Power supply
5 kg
Single phase 24 V ou 230 V
50/60 Hz
Internal dimensions
Ø 82,5 x 480 mm
External dimensions
225 x 535 mm
Net weight
5.5 kg
Cat. number
W000383150
The WELDRY 372 N INOX features a preset temperature to 120°C and
a plated heater resistance against the reservoir electrodes which allows
a good repartition of temperature.
2014-698
Portable quivers are necessary,
for electrodes maintenance,
near the welding working place.
Classification
EN 61000-6-2
EN 61000-6-3
EN 60204-1
Markers
Paint Marker Red
W000383105
Paint Marker Blue
W000383106
Paint Marker Green
W000383107
Paint Marker Black
W000383108
Paint Marker Orange
W000383109
Paint Tube White
W000383110
Paint Tube Yellow
W000383111
Paint Tube Red
W000383112
Paintstik White
W000383113
Paintstik Yellow
W000383114
Paintstik Red
W000383115
Welding Chalk
W000383116
The Valve Action is a fast-drying liquid
paint marker, that provides long-lasting,
wear- and weather-resistant marks,
that are safe for almost any surface.
Most versatile liquid paint marker in
the world, the xylene-free paint reduces
user health risks.
Markal Stylmark is a metal-ball tip marker to mark most surfaces.
The aluminum squeeze tube and thick paint makes it suitable for
rough, vertical and overhead surfaces with excellent adhesion
on oily and wet surfaces. Xylene-free paint reduces user health risks
Quik Stik is a smooth-marking solid paint crayon that
dries quickly to leave a bold, permanent mark on most
surfaces. The durable plastic twist-up holder prevents
breakage. Keep hands, clothing, and toolboxes clean
with the industry’s largest twist-up solid paint marker.
The soapstone welding crayon is resistant to heat up to
2000 °C (3630 ° F) and will not contaminate welds.
2015-098
W000383104
2015-102
Paint Marker Yellow
Description
2015-107
Cat N°
W000383103
2015-108
Designation
Paint Marker White
43
Antispatters products
Features
SPRAYMIG H2O
• Water based and odourless
• No influence on porosity and cold cracks
• No influence of the content of diffusible
hydrogen in the weld metal
• Solvent and silicone free
• Biodegradable
• Allows parts to be lacquered
SPRAYMIG SVB
• Silicone free
• Compatible with paint
• Use on cold parts
• Use on nozzles only and outside
contact tip
W000011092 spray 400 ml net
SPRAYMIG SVD
• Silicone free
• Compatible with paint
• Use on cold parts
• Use on nozzles only and outside
contact tip
• Dichloromethane solvent
W000271574 spray 300 ml net
SPRAYMIG SIB
• Silicone based
• Not for use on any parts that are
to be painted
• Use on cold parts
• Use on nozzles only and outside
contact tip
W000011093 spray 400 ml net
CERASKIN
• Ceramic coating
• An exceptionally fast drying,
long lasting and durable coating
• The ceramic base makes a barrier
and prevents weld spatter adhering
to welding equipment and welded parts
• Grants 8 consecutive hours welding
work (1 working day), without any
further adds of product
W000277679 spray 400 ml net
SPRAYMIG
SVB
Cat. nr
SPRAYMIG
H2O
W000010001 spray 400 ml net
2007-394
2007-394
2007 394
W000011074 drum 20 l
SPRAYMIG
SIB
2007-394
Designation
2009-250
SPRAYMIG
SVD
2010-382
CERASKIN
Non destructive cracks detection
FLUXO S 190
Piece degreasing & cleaning
of penetrant excess.
W000374827
FLUXO P 125
• Penetrant
• Temperature of use: 0 °C to 50 °C
• Without rhodamine
• Good impregnation
• A single spray lasts more than 30 min
without drying
W000374825
FLUXO R 175
Detection of cracks and surface faults.
Cracks are visible at the surface
of the plates, thanks to clear vivid red
indications easily seen by the naked eye
(no UV light required).
W000374826
Classification
EN 3452-2
ASME
RCCM (nuclear)
FLUXO
P 125
FLUXO
S 190
FLUXO
R 175
2012-278
Cat. nr
2012-277
Features
2012-279
44
Designation
www.we
ldline-alw
.com
TIG POINT
2002-002
TIG SHARP
Portable electric tool
for tungsten electrodes
sharpening
Chemical sharpening
of tungsten electrodes
Cat. nr
2006-528
Classification
EN 50144-2-3
Characteristics:
EN 60745-1
■ All you need to sharpen your tungsten
EN 60745-1/A1
electrodes (all ranges) delivered in
a practical metal case:
- Sharpening machine
- Clamp to lock the machine on a bench
- Standard blue head for the electrodes diameter 1.6 / 2.0 / 2.4 / 3.2 mm
- Nozzle connectable on a vacuum cleaner for extraction of tungsten dusts
- Electrode holder to clamp TIG electrodes
This equipment has to be connected
- Tools to assemble and dismantle
to a vacuum extraction for dusts
■ For an accurate sharpening:
- Choose the electrode diameter
- Select the grinding angle (10° to 70°)
Other product of the range
TIG SHARP
- Start the machine
Voltage
220 - 230 V
Red head (for tungsten
- Insert the electrode and turn it slowly
W000011037
electrodes Ø 1.0 / 4.0 /
Frequency
50 - 60 Hz
■ An incredible result:
4.8 / 6.0 mm)
Power
400 W
- The grind is perfect
Spare blue head
Amperage
1.8 A
- The grinding angle is very precise
W000011038
(for tungsten electrodes
Disk speed
30 000 pm
Ø 1.6 / 2.0 / 2.4 / 3.2 mm)
- Longitudinal sharpening, precise
Weight
1.85 kg
and symmetric angle.
W000011036
Spare diamond disk
Instructions for use:
■ Make the electrode to be out
from the torch of 15 mm.
■ Use the welding current to
warm the electrode to white.
■ Dip the electrode in the product
while rotating the electrode.
■ Make sure that the
result is satisfactory.
■ Carefully close the pot.
Cat. nr: W000011101
W000011035
OPTICLEAN II
New inverter-technology installation
for cleaning, polishing of TIG welds
and marking of stainless steel.
TER
INVER LOGY
O
N
H
C
TE
To order:
FEATURES & BENEFITS
Machine OPTICLEAN II
including:
Torch
Support torch
Support torch extension
Ground cable
Torch power cable
2.5 mm Allen key
Brush
Standard graphite insert 90
Narrow graphite insert 90°
TIG Bond pad 90°
Narrow TIG Bond pad 90°
Brill Bomar solution
Neutral Bomar solution
Neutralizing solution Inox Fit 500 ml
Operating manual
■ AESTHETIC: no stains on the steel
after cleaning.
■ ECOLOGICAL: no need to wear gloves or
protective masks with the neutral solution.
Large outdoor areas are not required:
no toxic vapor emissions, no need for water
treatment plant.
■ ECONOMIC: no passivation after cleaning
■ PRODUCTIVITY GAIN:
- no need to dip the pump into the liquid and to interrupt
the operation several times,
- improvement of the quickness while increasing current,
- efficiency increased with the carbon blush.
Supply Voltage
Frequency
Power
Electrode voltage
Insulation call
Noise level
Net weight
Dimensions
230 V monophasé
50/60 Hz
450 W
10/30 V AC/DC
IP 23
< 10 dB (A)
7 kg
300 x 230 x 240 mm
2008-753
OPTICLEAN II
2008-754
Technical data:
W000382322
W000275260
W000382323
W000382325
W000375139
W000375141
W000382326
W000382329
W000382571
W000382572
W000272348
W000272351
W000272347
W000272038
W000274842
-
Optional:
Marking Kit including:
W000271936
Erosion white marking electrolyte 100 ml
Black marking electrolyte 100 ml
Graphite marking insert 35 mm
Marking felts insert
W000382573
W000272041
W000272039
W000272040
45
Classification
EN ISO 3824
Ø
(mm)
Maximum
pressure (bar)
Coil length
(m)
Cat N°
Single hoses
Acetylene
Oxygen
Acetylene
Oxygen
Acetylene
Oxygen
Acetylene
Oxygen
LPG*
LPG*
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
6.3 x 12
10
10
10
10
10
10
10
10
10
10
5
5
10
10
20
20
40
40
20
40
W000010055
W000010056
W000010081
W000010057
W000010058
W000010059
W000010060
W000010061
W000010052
W000010062
Acetylene
Oxygen
Acetylene
Oxygen
Acetylene
Oxygen
LPG
LPG/Acetylene*
10 x 16
10 x 16
10 x 16
10 x 16
10 x 16
10 x 16
10 x 16
10 x 16
20
20
20
20
20
20
20
20
10
10
20
20
40
40
20
40
W000010064
W000010065
W000010066
W000010067
W000010068
W000010069
W000010053
W000010071
Oxygen
Acetylene
8 x 14
8 x 14
20
20
50
50
W000010079
W000010080
6.3 x 12
10 x 16
10
20
40
40
W000010072
W000010073
6.3 x 12
6.3 x 12
8 x 14
10 x 16
10 x 16
10
10
20
20
20
20
40
50
20
40
W000010077
W000010063
W000010078
W000010054
W000010076
Gas
printed
The date
se is the
on the ho
ring date
tu
manufac
2011-350
2011-348
0876-071_ret
HOSES
2012-228
Argon
Argon
Twin hoses
TWIN (Oxygen - Acetylene)
TWIN (Oxygen - Acetylene)
TWIN (Oxygen - Acetylene)
TWIN (Oxygen - Acetylene)
TWIN (Oxygen - LPG)*
* Propylene excluded
AUTOMATIC ROLLER FOR OXYGAS HOSES
TUBEREEL
Automatic roller for twin hoses
diameter 8 or 10 mm
Roller’s dimensions
■ Allows the operator to choose the hose length suitable to his application
■ Maximum length for inside diameter
8 mm: 20 m
■ Maximum length for inside diameter
10 mm: 15 m
■ Provided without hoses
On the ground
On a wall
Cat. nr: W000260575
From the ceiling
46
www.we
ldline-alw
.com
QUICK ACTION COUPLINGS
Classification
ISO 7289
EN 561
QUICKMATIC II
Quick action couplings with auto-close
■ These couplings are available to fit to hoses or directly on to a regulator outlet.
■ Providing a quick release coupling, the female side always been placed at the
source side of the flow.
■ Opening during use is possible. Closing once disconnected.
■ Complies with the ISO 7289 - EN 561 standards.
QUICKMATIC II
Ø hoses
(mm)
1 - fuel gases
2 - oxygen
3 - neutral gases (argon...)
6 and 10
W000011002
W000011005
6 and 10
W000011001
W000011004
4
W000011003
W000011006
Cat. nr
female coupling
Cat. nr
male coupling
Also exists in kits:
Cat. nr: W000011015
Cat. nr: W000011016
Hose connection
1
2016-281
2
Cat. nr: W000011017
3
2016-289
Regulator connection
4
QUICKMATIC II
2016-290
4 - fuel gases
5
2016-292
5 - oxygen
6
and
Cat. nr
female coupling
M16x150L
W000011008
3/8»L
W000011011
M16x150R
W000011007
3/8»R
W000011010
1/4»R
W000011009
12x100R
W000011012
Cat. nr
male coupling
Ø hoses
(mm)
W000011005
6 and 10
W000011004
6 and 10
W000011006
4
IC cutting nozzles
0327-031
0327-033
CUTTING NOZZLES
G1 cutting nozzles
6 - neutral gases (argon...)
Thread
Cutting
thickness
(mm)
IC profile
G1 profile
Acetylene
Gauge
(mm)
Acetylene
Propane/
Natural gas
W000262059
7/10
3-10
W000262089
W000262060
10/10
10-25
W000262061
12/10
25-50
W000262062
16/10
W000262063
G1 profile
IC profile
Gauge
(mm)
Cutting
thickness
(mm)
Propane/
Natural gas
W000262066
7/10
3-10
W000262098
W000262091
W000262067
10/10
10-25
W000262099
W000262093
W000262068
12/10
25-50
W000262100
50-80
W000262094
W000262069
16/10
50-80
W000262101
20/10
80-120
W000262095
W000262070
20/10
80-120
W000262102
W000262064
25/10
120-200
W000262096
W000262071
25/10
120-200
W000262105
W000262065
30/10
200-300
W000262097
W000262072
30/10
200-300
W000262106
47
OTHER FLAME
Tip cleaners
Spark lighter
Cat. nr: W000290900
Cat. nr: W000211924
2012-116
2009-294
0876-66
Cat. nr: W000010978
Gun model with ten renewal flints.
Traditional tool with five renewal flints.
Used to clean welding and cutting nozzles to
restore nozzle performance. Contains a range
of round needle files in a metal carry case.
PROTECFLAM
Inspection mirrors
Heat shield protection for walls and floors
during gas welding, brazing or soldering.
Mirror with magnetic stand
Single use
2006-397
Cat. nr: W000271449
2004-643
Asbestos
free
200 x 250 mm
2004-642
Cat. nr: W000010557
PROTECFLAM
Spare part: mirror.
Cat. nr: W000010558
Blister pack of 3 shields
200 x 250 mm
Cat. nr: W000276078
Cat. nr: W000273291
For all angle viewing. Fast and accurate visual inspection
of hidden areas with an almost limitless number of positions.
LEAKAGE CONTROL
HEAT PROTECTION
BUBBLE
THERMISHIELD
1000
BULLES
A high-return product
for leak detection
suitable for all gases
except high pressure
oxygen > 150 bars.
Heat shield gel
■ It is designed to stop
heat from travelling through
most metals during welding,
brazing or soldering.
■ It prevents from distortion
of metals and even plastics
caused by the heat
of a welding torch.
■ Volume: 500 ml
■ Volume: 400 ml (net)
650 ml (nominal)
■ Propellant gas: nitrogen
■ Base: water
2007-794
Cat. nr: W000010963
■ Volume:
400 ml (net)
650 ml (nominal)
■ Propellant gas:
nitrogen protoxyde
■ Base: lauryether
natrium sulfate
Cat. nr: W000011090
2000-228
A leakage
controller suitable
for all gases.
Cat. nr: W000274839
2009-249
Pack of 20 shields
48
9-297
2009-297
2005-272R
Very flexible (memory effect)
Long life duration
Both sides usable
2009-298
Circular telescopic mirror
No toxic
ase
fumes rele
PROTECFLAM TECH
www.we
ldline-alw
.com
Classification
EN 12413
EN 13743
CUTTING AND GRINDING DISKS
When buying such products, always ask for OSA certification.
The guarantee that the product complies with the safety standard and the
additional requirements of the Organisation for the Safety of Abrasives.
DUCTIFLEX PRO
Top quality cutting disks for professional
Dimension
Shape
Use
Specification*
Unit / box
Catalogue nr
115 x 1 x 22 mm
125 x 1 x 22 mm
125 x 1.6 x 22 mm
180 x 2 x 22 mm
230 x 2 x 22 mm
230 x 2.5 x 22 mm
230 x 3.2 x 22 mm
125 x 3.2 x 22 mm
230 x 2.5 x 22 mm
230 x 3.2 x 22 mm
flat
flat
flat
flat
flat
flat
flat
depressed
depressed
depressed
steel/stainless steel
steel/stainless steel
steel/stainless steel
steel
steel
steel
steel
steel
steel
steel
61A 60 S7 BF
61A 60 S7 BF
61A 60 S7 BF
A 36 S7 BF
A 36 S7 BF
A 36 S7 BF
A 36 S7 BF
A 36 S7 BF
A 36 S7 BF
A 36 S7 BF
50
50
50
25
25
25
25
25
25
25
W000261930
W000261931
W000335002
W000261934
W000261935
W000261937
W000261940
W000335006
W000261944
W000335004
■ Extra thin wheels providing a fast and economical cutting
2007-111
A range of high quality product providing an ideal balance between performance and life duration.
s
pplication
Cutting a
Same quality with depressed center
performance on steel and stainless steel
■ Extra long product life
■ High cutting speed
■ Specially efficient on steel bars, pipes, sheets or shaped sections
■ Hard cutting disks for structural steel.
■ No need to eliminate burr after cutting
■ Long life duration
■ Less material waste
■ Iron and structural steel cutting
Grinding
DUCTIFLEX
ns
applicatio
Dimension
Shape
Use
Specification*
Unit / box
Catalogue nr
115 x 6 x 22 mm
125 x 6 x 22 mm
180 x 6 x 22 mm
230 x 6 x 22 mm
depressed
depressed
depressed
depressed
standard steel
standard steel
standard steel
standard steel
A 30 S7 BF
A 30 S7 BF
A 30 S7 BF
A 30 S7 BF
10
10
10
10
W000261945
W000261946
W000261947
W000261948
DUCTIFLAP
Pumicing
2007-108
A grinding range for standard structural steel
ns
applicatio
Abrasive flap disks
These disks are made by cutting abrasive fabrics, then cutting as flaps
and bonding them on a fiberglass or nylon backing plate by an adhesive.
115 x 22 mm
125 x 22 mm
Grit
Unit / box
40
60
40
80
10
10
10
10
15 % conical for
fiberglass backing
W000264532
W000264533
W000264535
W000335008
Flat for nylon
backing
W000273754
W000273759
W000273757
W000273755
2009-010
Shape
Dimension
49
MAGSWITCH
Magnetic ground clamps and positioners
2012-602
The productivity in time savings with faster set ups, the convenience of no hassle use, and the safety
advantages of using your hands less and less to handle and position steel cannot be ignored. From the point
you receive steel in, to how you move it through your plant, to how you fabricate it, there is a MAGSWITCH
tool that will improve safety and productivity. MAGSWITCH is simply a more productive way to do the job.
As you look at the products, consider these core common features of each tool:
■ Super strong - does the big work
■ Complete on/off control
■ Precise placement/no fighting magnets
■ Holds strong on thin steel
Magnetic
ground
clamp 300
Magnetic ground
clamp 600
67
0.3
40
W000373781
300 A
77
0.8
89
600 A
76
32
0.18
40
N/A
76
W000373782
W000373783
Incredible strong
Mini Multi Angle/
300A ground
Muti Angle 400
Mag-Vise
Multi Angle 1000
Mag-Vise
89
44
0.36
67
300 A
221 193
81
1.13
178
N/A
160 200 125
4.25
446
N/A
Mag Square 150
169
96
53
0.3
67
N/A
215 190
80
1.5
268
N/A
Positioning with
incredible strong
W000373787
Mag Square 600
Pivot Angle 200
250 180
65
1.72
90
N/A
From 22 to 270 degrees
W000373789
N/A
1.45
27
N/A
W000373786
W000373788
For sheet dragging or
W000373790
small steel handing works
For removing parts
W000373791
from cutting tables
Mag Square
150
Multi Angle 1000
Mag-Vise
2012-604
Hand Lifter
60 m Manual
2012-606
Pivot Angle
200
Mini Multi
Angle/300A
ground
Mag Square 600
2012-605
27
W000373785
Super strong hold
all slides
2012-604
Muti Angle 400
Mag-Vise
0.64
W000373784
Hand Lifter 60 CE,
Cordless electric
2012-607
95
2012-603
180 155
Hand Lifter
260 180 100
60 m Manual
Hand Lifter 60 CE,
254 178 102
Cordless electric
50
Mini Multi
Angle
Quickly set up
2012-605
Mini Multi Angle
155 104
Cat. nr
Feature & benefit
2012-603
Magnetic ground
clamp 300
Magnetic ground
clamp 600
Dimension (mm) Weight Hold on thick Welding
steel (kg) current (A)
(kg)
H
W
D
2012-608
Name
2012-602
MAGSWITCH is indeed technology that «changes the way things are done».
www.we
ldline-alw
.com
HEAD AND EYES PROTECTION
FG HELMET
FG HELMET
(FLIP-UP WINDOW)
Passive handshields
Delivered without glass.
Designation
Material
Hand FG
Polyester
reinforced
fibreglass
Classification
CE EN 175
Weight
(without glass)
424 g
Passive helmets FG
Heavy duty solutions (up to 400 °C).
Delivered with Adjustable headgear “B” and without glass.
Features
Cat. nr
Excellent resistance.
Window 105 x 50 mm.
W000372272
Excellent resistance.
Window 110 x 90 mm.
W000372273
Designation
FG Helmet
2014-563
FG HELMET
(flip-up
window)
Material
Weight
Features
(without glass)
Reinforced
fibreglass
414 g
Reinforced
fibreglass
574 g
Window
105 x 50 mm
Window
110 x 90 mm
Flip-up window
105 x 50 mm
Cat. nr
W000011103
W000011104
W000372271
Passive helmet MULTI FLIP-UP
Light weight welding helmet with optimal use /comfort.
Long lifetime, headgear with rack, rugged.
Designation
MULTI
FLIP-UP
MULTI FLIP-UP
2011-477
2011-483
2007-832
FG HAND
Material
Heat-resistant
material
Weight
(without glass)
600 g
Features
Cat. nr
Flip –up window
105 x 50 mm
Shade 10 glass
included
W000010804
51
HEAD AND EYES PROTECTION
WELDLUX
HELMET
WELDLUX Helmet
Extra wide vision 114 x 133 mm
with passive glass GOLDEN PROTANE® shade 11
Designation
Cat. nr
WELDLUX Helmet
Classification
CE EN 175
CE EN 169
ADJUSTABLE
HEADGEAR «C»
2007-818
W000335131
0947-075R
■ Enveloping profile providing excellent throat and neck protection
■ Fibreglass reinforced polyester
■ Heat (170 °C) and humidity resistant
■ Headgear with rack, rugged and very comfortable
■ Delivered with hedgear and glass
■ Very light weight: 390 gr
2007-817
ADJUSTABLE
HEADGEAR «B»
The GOLDEN PROTANE® filter with a gold mirror coating reflects
an additional 90% of the infrared radiation and reduces the amount
of heat to which the eyes are exposed:
Accessories for helmets
Cat. nr
For FG and TP helmets
W000010884
Adjustable
headgear «C»
For WELDLUX helmet
W000335158
Sweat band
Foam band (10 pieces pack)
W000260486
Leather protection
for neck
• Grain leather
• Fiaxtion with adhesive band
• Protection of the neck
against arc radiation
W000335139
SWEAT
BAND
1909-060
Features
Adjustable
headgear «B»
1198-022
Designation
LEATHER PROTECTION
FOR NECK
Leather helmet
52
Weight
(without glass)
Folding leather
helmet
120 g
Flip-up leather
helmet
250 g
Features
Grain leather.
Folding model,
ideal for supervisors
• Adjustable headgear
• Comfort foam at the
forehead and chin levels
• Delivered two CR39
protection screen
Cat. nr
W000011115
W000011135
FLIP-UP
LEATHER
HELMET
FOLDING
LEATHER
HELMET
0254-055
Designation
2010-702
Helmets in leather for welding operations in difficult
access place, dedicated for short time applications
and for control. Delivered with 105x50 mm shade 11 glass.
www.we
ldline-alw
.com
AUTODARKENING LCD HELMETS
WELDCAP
AUTODARKENING LCD HELMETS
GOLDENARK
Welding has never been so comfortable.
High range LCD helmet that offers
the biggest viewing area in the industry.
FEATURES & BENEFITS
■ Utmost protection
and multi-purpose use
■ Increased protection
The WELDCAP ® BUMP version with
an additional ergonomic protection
offers increased protection
Standard
EN 175
EN 379
EN 166
2016-231
■ Revolutionary wear comfort
WELDCAP ® brings together
the comfort of a cap and the
advantages of a welding helmet
■ Very easy to take on and off
■ Improving welders’ performance
and safety The optical unit
WELDCAP increases the lateral and
the horizontal fields of vision
Helmet classification
CE EN 175
LCD unit
un classification
2016-236
2015-654
CE
C EN 379
Protection
device of the
WELDCAP®
BUMP
UMP
FEATURES & BENEFITS
■ Extra wide field of view
(dimension: 112 x 78 mm)
■ New comfortable headgear
■ Yellow cell with optical class
1/1/1/2
■ 4 optical sensors
■ InfoTrack system providing useful
information (current time - total
welding time - alarm - temperature)
with multi language help menu
HTWEIGHT
ULTRA LIG
WELDCAP
Applications
1/1/2/2
1
UV/IR permanent
DIN 3
Variable DIN 9 to DIN 12
0.16 ms at room temperature - 0.11 ms at 55 °C
0.3 s
400 g
2 lithium batteries 3 V exchangeable (CR2032)
Optical class according EN 379
Number of captors
Protection
Shade (clear) (grinding)
Shade (dark)
Switching time - clear to dark
Switching time - dark to clear
Weight
Power supply
To order:
WELDCAP®
WELDCAP® BUMP
GOLDENARK
Features
All electric arc welding processes.
All thermal cutting processes. Grinding.
■ External grinding button
■ 4 modes settings per digital key:
- welding: shade 4/9-13
- grinding
- cutting or low amperage welding
variable shade 5 to 9
- X-mode: this mode allows welding
in outdoor conditions or with very
low arc current (lens turn on when
it’s sense the welding current)
All electric arc welding processes.
All thermal cutting processes.
Grinding (external button)
1/1/1/2
4
UV/IR permanent
DIN 4
Variable DIN 9 to DIN 13
0.05 ms
Variable from 0.1 to 1.0 s
650 g
2 lithium batteries 3 V exchangeable (CR2450 Li)
To order:
W000385154
W000385155
GOLDENARK
W000386519
53
AUTODARKENING LCD HELMETS
CHAMELEON 4 V+
CHAMELEON 3 V0
Every processes - Special MMA and MI/MAG
■ Variable shade DIN 4/9-13
■ Field of view 97 x 40 mm
■ Switching time clear-dark: 0,06 ms
■ Power supply: solar cells + 2 alcaline batteries
■ 2 independent optical sensors
Every processes - Special for TIG
■ Variable shade DIN 4/9-13
■ Field of view 97 x 47 mm
■ Switching time clear-dark: 0,05 ms
■ Power supply: solar cells
+ 2 lithium batteries
■ 3 independent optical high
sensitivity sensors
2010-404
2011-518
Cat. nr: W000372475
Cat. nr: W000276910
2011-489
NEW
CITOLUXE ADVANCE
FEATURES & BENEFITS
■ Every welding process
W000372474 - CITOLUXE with 4500 cell
■ Extra large viewing area 97 x 60 mm
■ Switching time clear to dark: 0,05 ms
■ 4 independent optical sensors for optimal detection including position welding
■ Power supply: solar cells + 2 alcaline batteries
Classification
CE EN 175
CE EN 379
2007-855
External button
for grinding mode
2011-487
Auto-start
Infotrack system:
provides useful information
(current time - total welding
time - alarm - temperature)
54
4500 cell: top of the range
solution for all your applications
■ Variable shade DIN 4/5-13
■ 4 modes settings per digital key:
- welding: shade 4/9-13
- grinding
- cutting or low amperage welding varaiblee shade 5 to 9
- X-mode: this mode allows welding in outdoor
door conditions
or with very low arc current (lens turn when
en it’s sense the
welding current)
NEW
External button
for grinding mode
www.we
ldline-alw
.com
AUTODARKENING LCD HELMETS
WITH AIR FLOW SYSTEM
ith
Helmet w nd
a
d
powere flow
filtered air
ZEPHYR
ZEPHYR / FLIP’AIR
R
The ultimate welder protection
2012-034
2010-009
FEATURES & BENEFITS
■ With the ZEPHY/FLIP’AIR solution, you will find
in a rugged carry bag:
- A shoulder strap,
- The ZEPHYR or FLIP’AIR
- A battery charger,,
helmet,
- The ZEPHYR air flow system, - An air flow-meter,
r,
- One extra filter.
- Protected hose connection,
■ 2 flows rates (low 160 l/min and high 200 l/min).
■ Two alarms in case of flow insufficiency:
a tone and a vibration
■ Lithium battery with a 8-hour lifetime duration (160 l/min +/- 5%)
■ Lateral or vertical air flow
■ FLIP’AIR with flip-up system for large view grinding
Classification
CE EN 175
CE EN 379
CE EN 12 941 TH2
NEW
External button
for grinding mode
2011-521
FLIP’AIR
2010-010
Complete package
(helmet + airflow system)
ZEPHYR 3200: W000372466
FLIP’AIR4500i: W000372470
2 years
warranty
on the airm
flow syste
4500 or 4500i cell
POWERED RESPIRATOR
CLEANSPACE
2008-243
4500 & 4500i cells
Top
T of the range solution
This unique method of personal respiratory
protection delivers significant benefits to workers
in industry.
CLEANSPACE
is compatible with:
■ Welding & safety helmets
■ Goggles, spectacles and face shields
■ Hearing protection
CLEANSPACE
Comfort air flow settings
Maximum air flow
Power Unit
Weight
Mask
Audible alarm at ear
Motor
Life duration
Battery
Automatic switch-off
Internal battery duration
Internal battery charging time
3 levels
200 l/min.
485 g
115 g
75 dB(A)
10 years
3 years or 500 cycles
3 minutes after idle
4.5 hours minimum
(typically > 6 hours)
2 hours (to 95%)
see our complete accessories and protection range on our WELDLINE website: www.weldline-alw.com
2016-441
CLEANSPACE is a compact and light weight power
unit cushioned around the back of the neck,
counter-balancing the soft silicone low profile mask
and providing fresh clean air, on demand, as you
breathe.
2016-442
CLEANSPACE is a major innovation
in personal respiratory protection.
To order:
Respirator unit :
(Composition: 1 power unit
+ 1 filter P3 + 1 charger
+ 2 protecting neck (thin & large)
+ 1 flow test cap+ 1 storage bag)
W000386837
Silicon mask small
Silicon mask medium
Silicon mask large
W000386838
W000386839
W000386840
55
GOGGLES / SPECTACLES
EN 175
Except PILOT 1:
EN 175 and EN 166
Goggles and masks for welding applications (coloured)
CLASSIC OVER
WELDING
2005-257
■ Anti-scratch surface
■ Nylon frame and side shields
■ Changeable polycarbonate lenses
■ Central screw for quick lens
replacement
■ Weight: 35 g
■ Over spectacles
■ Polycarbonate
■ Lateral protection
■ Protection against high-speed particles
- low energy
■ Protection against high-speed particles at extreme
temperatures
■ Resistance to surface damage by fine particles
■ Weight: 37 g
2015-025
PILOT 2 PLASTIC
PILOT 1
■ Double cup black plastic frame with nose bridge
adjustment
■ Side ventilation value
■ Adjustable elastic headband
■ Weight: 65 g
FASHION WELDING
■ Spectacles
■ Polycarbonate
■ Protection against high-speed particles - low
energy
■ Protection against high-speed particles at extreme
temperatures
■ Resistance to fogging of oculars
■ Resistance to surface damage by fine particles
■ Weight: 31 g
PILOT FLIP UP
2015-023
■ Flip up lenses anti-scratch treated
■ Elastic headband
■ Indirect ventilation value
■ Weight: 137 g
2005-254
2005-253
■ One piece soft black PVC frame allowing
quick lens replacement
■ Elastic headband
■ Aerated side covers honeycombed casing for good
ventilation and to prevent from lens
dimming
■ Weight: 60 g
0947-89
CLASSIC WELDING
EN 166
Goggles and masks for protection (clear glass)
FASHION VISIT
■ One piece soft black PVC frame allowing quick
lens replacement
■ Aerated side covers honeycombed casing for
good ventilation and to prevent from lens dimming
■ Elastic headband
■ Weight: 60 g
■ Impact resistant
■ Polycarbonate single lens
■ Sports and ergonomic
design
■ Weight: 22 g
2005-259
2008-755
■ Anti-scratch surface
■ Nylon frame and side shields
■ Changeable polycarbonate lenses
■ Central screw for quick
lens replacement
■ Weight: 35 g
PILOT 1 PLASTIC
2008-251
CLASSIC VISIT
CLEAR
Designation
CLASSIC WELDING
CLASSIC OVER WELDING
CLASSIC OVER VISIT
56
PILOT 1
2015-024
■ Panoramic spectacles also usable as over
spectacles
■ Polycarbonate lens and frame
■ Protection against high-speed particles
- low energy
■ Protection against high-speed particles
at extreme temperatures
■ Resistance to surface damage by fine particles
■ Weight: 37 g
Shade
Cat. nr
5
W000011055
5
W000383506
5
W000011047
6
W000011048
PILOT 2 PLASTIC
5
W000011052
PILOT FLIP UP
5
W000011046
FASHION WELDING
5
W000383505
CLASSIC VISIT CLEAR
Clear
W000011057
PILOT 1 PLASTIC
Clear
W000011049
FASHION VISIT
Clear
W000011062
CLASSIC OVER VISIT
Clear
W000383507
www.we
ldline-alw
.com
WELDING GLASSES
2007-839
2007-840
WELDGLASS
Choose the lens shade adapted
to your working conditions
EN 166:
Clear glasses
EN 169:
Coloured glasses
Current
(A)
Coated
electrodes
1
2,5
5
10
20
30
40
60
80
100
150
175
200
225
250
300
350
400
450
500
MIG
Heavy metals
MIG
Light alloy
MAG
5
6
7
8
9
10
11
12
13
14
PLASMA
Cutting
Gouging
PLASMA
Welding
6
7
8
9
10
8
8
9
9
10
11
10
10
11
11
11
9
11
10
12
11
12
10
11
13
12
12
13
12
11
13
12
12
12
13
13
13
13
14
14
105 x 50 mm
100 pieces
5 pieces
W000010915
W000010916
W000010917
W000010918
W000010919
W000010920
W000010921
W000010922
W000010923
W000010924
15
15
14
15
15
EN 169 / EN 166
110 x 90 mm
100 pieces
5 pieces
W000335025
W000335026
W000335027
W000335028
W000335029
W000335030
13
14
14
105 x 50 mm Golden
5 pieces
W000335009
W000335010
W000335011
W000335012
W000335013
W000335014
W000335015
W000335016
W000335017
-
14
14
Filtering coloured, GOLDEN protane® and circular glasses
Shade
TIG
W000010927
W000010928
W000010929
W000010930
W000010931
W000010932
W000010933
W000010934
W000010935
W000010936
133 x 114 mm Golden
5 pieces
105 x 32 mm
5 pieces
Circular glasses D50 mm
100 pieces
10 pieces
W000335063
W000335064
W000335065
W000335066
W000335067
W000335068
W000335072
W000335073
W000335074
W000335075
W000335076
W000335077
W000335078
W000335079
W000335080
-
W000010925
W000010937
W000010949
-
W000335035
W000335036
W000335037
W000335038
W000335039
W000335040
W000335041
W000335042
W000335043
-
W000335085
W000335086
W000335087
W000335088
-
Pour d’autres dimensions de verres, nous consulter
Clear glass EN 166
100 pieces
105 x 50 mm
5 pieces
100 pieces
110 x 90 mm
5 pieces
135 x 115 mm
5 pieces
105 x 32 mm
5 pieces
Circular glasses D50 mm
100 pieces
W000010926
W000335018
W000010938
W000335044
W000335069
W000335081
W000010979
Protection plate CR-39® EN 166
105 x 50 mm
150 pieces
5 pieces
110 x 90 mm
150 pieces
5 pieces
135 x 115 mm
150 pieces
5 pieces
105 x 32 mm
150 pieces
5 pieces
W000335019
W000335045
W000335070
W000335082
Magnifying glass
Diopter
+ 1,0
W000335031
W000335020
W000335046
W000335071
W000335083
EN 166
105 x 50 mm
+ 1,5
W000335032
+ 2,0
+ 2,5
W000335033
W000335034
5 pieces pack. These magnifying glass (dimension 105x50 mm) have to be used
with coloured filters. Can be mounted on passive masks or helmets.
It can fit also LCD autodarkening helmets.
57
Classification
EN 340 - EN 11611
LEATHER PERSONAL PROTECTION EQUIPMENT
Welding Aprons
Split leather
apron
Grain leather
apron
90 x 60 cm
110 x 80 cm
110 x 80 cm
Features
Cat. nr
Protective welding apron
in premium grade leather
tanned with chromium salts
(mineral substances), Leather
strap with quick release clips
to the waist and flap
W000010586
Split
leather
apron
W000010587
W000010588
2005-158
202-050
Split leather
jacket
Welding Jackets
Designation
Grain leather jacket.
Half-back
fireproofed cotton
Features
XL/78 cm
Split leather
jacket
XXL/78 cm
XL/78 cm
Grain leather
jacket.
Half-back
fireproofed
cotton
2004-513
2004-512
XXL/78 cm
58
Grain
leather
apron
0951-030
Designation
• Premium grade split leather tanned
with chromium salts (mineral substances)
• The jacket fastens to the front with an
overlap of leather and Velcro for additional
protection against spatter, the inner neck
been of double cotton for comfort
• Tightening elastic to the wrists
• Premium grade grain leather tanned
with chromium salts (mineral substances)
• Half of the back be made from flame retardant
cotton ensuring a light, flexible jacket
• The jacket fastens to the front with an overlap
of leather and Velcro for additional
protection against spatter, the inner neck
been of double cotton for comfort
• Tightening elastic to the wrists
Cat. nr
W000010594
W000010595
W000010596
W000010598
www.we
ldline-alw
.com
PROTECTIVE CLOTHES
EN ISO 11612: 2008
A1 - B1 - C1
EN ISO 11611: 2007
Class 1 - A1
EN ISO 1149-5: 2008
IEC 61482-2: 2009
Class 1
WELDCOT 2
New protective clothings: comfort, lightness and high level of safety.
Last technology for the heat protection combining low weight,
high functionality and design.
JACKET
NEW FIBER
Modacrylic
Important:
choose your
size with the
hereunder
table
2011-460
OVERALL
Size EU
S 46
M 48
M 50
L 52
L 54
XL 56
XL 58
XXL 60
XXL 62
XXXL 64
TROUSERS
A
170-176
176-182
176-182
176-182
182-188
182-188
182-188
188-194
188-194
188-194
B
88-92
92-96
96-100
100-104
104-108
108-112
112-116
116-120
120-124
124-128
C
76-80
80-84
84-88
88-92
92-96
96-100
100-104
104-108
108-112
112-116
Size
S
M
L
XL
XXL
XXXL
TROUSERS
W000372262
W000372261
W000372260
W000372259
W000372258
W000372257
JACKET
W000372268
W000372267
W000372266
W000372265
W000372264
W000372263
WELDING SHOES
OVERALL
W000372248
W000372249
W000372253
W000372252
W000372251
W000372250
Classification
EN ISO 20345
SUPER FORJA METAL FREE
2012-637
■ The best performance at reasonable price, always
complying with all technical requirements
and the toughest quality control
■ Extra thick, anti-sparkling and waterproof leather
■ Tough, agile, comfortable and secure
■ Ergonomic last and shock absorber sole
■ Ant-static insole
■ Very lightweight, resistant and durable
■ Padded anti-friction collar
■ Extra breathable and resistant lining
2011-459
2011-462
2011-461
COAT
COAT
W000372242
W000372243
W000372244
W000372245
W000372246
W000372247
Size
36
37
38
39
40
41
HOOD
W000372256
W000372255
W000372254
-
Cat. nr
W000376200*
W000376201*
W000376202*
W000376203*
W000376204
W000376206
* On demand
Size
Cat. nr
42 W000376215
43 W000376216
44 W000376217
45 W000376218
46 W000376219*
47 W000376220*
48 W000376221*
Safety
level
S3
Toe
protection
Plastic
Antipuncture
Outsole
plate
Non metallic
PU/PU
Upper
Full-grain
leather
59
HANDS PROTECTION
Classification
EN 420
Welding gloves for MMA & MIG/MAG processes
Palm index finger and inner of the thumb in
natural grain leather for high protection and
extra sensitivity
■ Reinforcement in grain leather of the
seams on top of the thumb and on the
base of the finger backs.
■ Glove rear and cuff are made of
natural split leather, length 150 mm
(+/- 5 mm) and a thickness of 1.3 mm.
■ Overall length of the glove: approximately 350 mm (size 10) +/- 5 mm.
■ Do not use to handle objects over 50 °C.
2014-615
Size
10
Cat. nr
W000382262
2131
EN 388
413X4X
E N 407
2014-614
TIG welding process
TIG
60
Size
9
10
Cat. nr
W000380519
W000380520
Size
10
Cat. nr
W000380511
3143
41344X
3133
2014-604
Split leather and flame retardant treatment
■ 1.3 mm thick (+/- 0.2 mm).
■ Reinforcement of the blue split leather
glove for added protection of the palm
thumb and index finger.
■ Back being one complete piece.
■ Overall length of the glove: approximately
350 mm (size 10) (+/- 5 mm).
■ Handling of component parts not
exceeding 100 °C.
EN 3 8 8
4 1 3 X4 X
EN 4 0 7
Palm in red split leather flame retardant treated,
back in one single piece of Kevlar
fabric with aluminised face.
■ Palm in split leather flame retardant
treated and double stitched in cotton.
■ Inside cuff in natural split leather and
double stitched in cotton.
■ Outside cuff and back of hand in one
single piece of Kevlar fabric with one
scraped face and one aluminised face.
Doubled stitched with cotton.
Classification
■ Overall length of the glove:
EN 12 477A
approximately 355 mm.
■ Handling of component parts not exceeding 100 °C.
EN 3 8 8
Size
10
EN 407
Cat. nr
W000010420
Protection and handling
DOCKER
■ Palm in grain leather.
■ Cotton back.
■ Fabric cuff.
■ Elastic tightening glove back.
2111
E N 388
412X4X
EN 407
2014-611
Lamb skin glove for high level of dexterity
and flexibility
■ Complete hand in natural grain leather.
■ Cuff in natural cow split leather.
■ Overall length of the glove:
approximately 360 mm.
■ Handling of component parts not
exceeding 100 °C.
Cat. nr
W000380518
Size
10
Cat. nr
W000381386
3123
EN 3 8 8
2009-007
Cat. nr
W000382261
Size
10
STOPCALOR ALU
STOPCALOR +
Size
10
EN 4 0 7
2013-117
Reinforcement by blue split leather
for long lasting
2122
■ Reinforcement of the blue split leather
glove for added protection of the palm
EN 388
thumb and index finger.
41XX2X
■ Reinforcement in split leather of the
seams on top of the thumb and on the
base of the finger backs.
EN 407
■ Cuff in natural split leather, length
150 mm (+/- 5 mm) and a thickness of 1.3 mm.
■ Overall length of the glove: approximately 350 mm
(size 10) +/- 5 mm
■ Handling of component parts not exceeding 100 °C.
Classification
EN 12 477A
EN 3 8 8
4 1 XX2 X
STOPCALOR
LONG BASIC +
Palm in natural grain leather for extra
flexibility. Flame retardant treatment
■ With doubled fabric.
■ Overall length of the glove:
approximately 350 mm
■ Handling of component parts not
exceeding 100 °C.
2122
2014-607
UNIVERSEL
Natural split leather
American cut with webbed thumb.
2132
■ Palm and thumb in natural split
leather to protect from the heat.
E N 388
■ Reinforcement in split leather of the
41XX2X
seams on top of the thumb and the
base of the finger backs.
■ Cuff in natural split leather, length
E N 407
150 mm (+/- 5 mm) and a thickness
Size
Cat. nr
of 1.3 mm.
W000380517
10
■ Overall length of the glove: approximately 350 mm
(size 10) +/- 5 mm.
■ Seams in para-aramide wire (flame retardant and projectile resistant).
2014-605
LONG BASIC
V
ANTI IR/U N
IO
PROTECT
SELF
HABLE
EXTINGUIS
300 mm
width kit of
4 punched
strips
2 mm
2 mm
Shade
Height
Cat. nr
Orange
1 800 mm W000010333
CE
Green
1 800 mm W000010335
T9
Classification
EN 1598
Dimensions
height x width
1 400 x 1 400 mm
Flame and
Orange
1 600 x 1 400 mm
low amperage
CE
1 800 x 1 400 mm
arc welding
2 000 x 1 400 mm
1 400 x 1 400 mm
Flame and
1 600 x 1 400 mm
Green
low amperage
T6
1 800 x 1 400 mm
arc welding
2 000 x 1 400 mm
1 400 x 1 400 mm
MMA and MIG/
1 600 x 1 400 mm
Green
MAG high ampeT9
1 800 x 1 400 mm
rage arc welding
2 000 x 1 400 mm
Shade
Strip’s hook (kit of 11 pieces)
Width 200 mm, for 33.7 mm pipes,
(usable for 32 mm)
Cat. nr: W000010459
Ring (kit of 10 pieces)
For an 33 % overlap,
between two handing hooks.
Cat. nr: W000010460
MOBILE SCREENS
PREMIUM
■ To prevent from ripping or tearing
of the material, the four sides have
been hemmed
■ Made from PVC with a thickness
of 0.4 mm (0.5 mm for the Green S9)
■ They are supplied with 7 eyelets
across the width completed with
7 metal hanging rings
■ The curtains can be joined by
the snap fasteners fitted on the
height side
Application
Cat. nr
W000010354
W000010355
W000010356
W000010357
W000010350
W000010351
W000010352
W000010353
W000010358
W000010359
W000010360
W000010361
UNIVERSAL
0823-18
Robust and portable
screen. The curtain
is tight and stable
when in position.
The UNIVERSAL screen with strips
is a very stable screen, offered with castors.
■ Screen frame in square tube
50 x 32 x 2 mm and round
tubes 35 x 2.5 mm
■ With it’s large diameter
castors (Ø 75 mm) and
it’s rugged frame it will be
a long lasting investment
■ Galvanized pipes frame
(diam. 25 x 1 mm)
■ Screen
1 700 mm x 1 700 mm
Designation
Orange CE
Green T9
V
ANTI IR/U N
IO
T
C
PROTE
SELF
HABLE
EXTINGUIS
Rotating foot
for creation of booth
Designation
Orange CE
Green T6
Green T9
Complete screen (frame+curtain)
Width
Height
1 750 mm
2 000 mmm
W000010365
W000010363
W000010364
Classification
EN 1598
Classification
EN 1598
Frame height 2 100 mm
Screen width L 4 300 mm =
1 100 + 2 100 + 1 100 mm
1 frame on castors
+ 2 rotating extensions L 1,10 m
+ 1 accessories kit
+ 5 kits of 4 strips
Height 1 800 mm
W000010292
W000010291
Classification
EN 1598
0823-23
Thickness
WELDING
CURTAINS
1026-07
WELDING STRIPS
61
CURTAINS AND HEAT RESISTANT FABRICS
Glass fiber 2 sided polyurethane.
VULCAIN BLANKET
■ Temperature - Peak: 600 °C / Continuous: 550 °C
■ Horizontal and vertical light welding,
Dimensions H x L
cutting and grinding applications
2 000 x 1 000 mm
■ Thickness: 0,7 mm
2 000 x 2 000 mm
3 000 x 2 000 mm
■ Weight: 710 g/m2
Fire proof
ETNA BLANKET
Cat. nr
W000010319
W000010320
W000010321
W000010322
W000010323
W000010324
2009-263
3 000 x 3 000 mm
4 000 x 3 000 mm
4 000 x 4 000 mm
cate
MO certifi
2009-254
■ Temperature: Peak: 900 °C /
Continuous: 750 °C
■ Horizontal and vertical heavy duty
welding and grinding applications
■ Thickness: 1,6 mm
■ Weight: 1 100 g/m2
Dimensions H x L
1 000 x 1 000 mm
2 000 x 1 000 mm
2 000 x 2 000 mm
3 000 x 2 000 mm
3 000 x 3 000 mm
4 000 x 3 000 mm
VULCAIN CURTAIN
Curtain delivered with 7 suspension metallic hooks
and a velcro band for joining 2 pieces.
■ Temperature - Peak: 600 °C / Continuous: 550 °C
■ Welding, cutting and grinding applications
■ Thickness: 0,7 mm
■ Weight: 710 g/m2
2009-260
Dimensions H x L
1 600 x 1 500 mm
1 800 x 1 500 mm
2 000 x 1 500 mm
62
Cat. nr
W000010316
W000010317
W000010318
Cat. nr
W000010325
W000010326
W000010327
W000010328
W000010329
W000010330
Our new WST2 torches are above
all a range of welding torches that
efficiently extract welding fumes.
Extraction is obtained at a high
extraction rate with low load loss
due to the advanced air flow design
of the torches.
The WST2 torches offer same
welding accessibilty than traditional
torches (at same welding
characteristics).
2015 192
2015-192
WST2 fume extraction torches
WST2
Classification
WST2 torches
are compliant to EN 60974-7
and to french INRS
1st july 2015 regulation.
Technical characteristics:
AIR
WATER
WST2 - 2R
WST2 - 3R
WST2 - 4R
WST2 - 3W
WST2 - 4W
WST2 - 5W
M6
12 mm
250 A
225 A
1180
M8 x 30
15 mm
300 A
270 A
1365
M8 x 30
15 mm
400 A
320 A
1465
M8 x 30
15 mm
300 A
260 A
1570
M8 x 30
15 mm
360 A
320 A
1565
M8 x 30
19 mm
450 A
410 A
1565
73
8 400
87
13 100
94
10 600
113
16 300
94
10 600
113
16 300
94
12 500
113
16 500
90
11 000
108
16 300
94
12 500
113
16 500
Contact tube
Ø nozzle
CO2
Ar / CO2
Weight (g) according standard
Welding intensity @ 100%
duty cycle
For speed 0.25 m/s
2015-182
For speed 0.3 m/s
Flowrate m3/h
Suction Pa
Flowrate m3/h
Suction Pa
To order WST2:
AIR
WATER
Description
Reference
Description
Reference
3M
WST2 - 2R
4M
250 A @ 100%
5M
W000381887
W000381901
W000381889
3M
WST2 - 3W
4M
300 A @ 100%
5M
3M
W000381890
3M
W000381904
WST2 - 3R
4M
300 A @ 100%
5M
3M
WST2 - 4R
4M
400 A @ 100%
5M
W000381888
W000381897
WST2 - 4W
4M
360 A @ 100%
5M
W000381898
3M
W000381891
W000381899
W000381900
LN: Long Nozzle – Torch with extended nozzle:
+5 cm at the horizontal part of the torch. Ideal
for easier access to difficult joints and for very
high duty cycle welding (the welder’s hand is
not close of the welding bead).
WST2 5W *
4M
450 A @ 100%
5M
WST2 5W LN * 3M
450 A @ 100% 4M
(Extended nozzle) 5M
W000381902
W000381903
Transformation kit of a standard torch
to a DUALFLOW version: W000385157
DUALFLOW is a device allowing the modulation of the fumes extraction flowrate
by the welder. By a simple pulse on a microswitch on the handle of the torch, and
during welding the welder can decide to change the suction power. This reduced
flowrate will apply for welding zone in confined area providing in all situations
high quality welds and preserving the welder from the fumes. DUALFLOW is
patented by Air Liquide Welding.
AIR
Description
3M
W000381908
WST2 - 2R
4M
250 A @ 100%
5M
W000381909
Consult us
3M
Consult us
WST2 - 3R
4M
300 A @ 100%
5M
Consult us
WATER
Reference
W000381907
* Double cooling circuit: Air Liquide Welding patent.
Option:
To order WST2 DUALFLOW:
W000381905
W000381906
2015-428
Captation minimal performances
3M
WST2 - 4R
4M
400 A @ 100%
5M
W000384970
Description
Reference
3M
W000384972
WST2 - 3W
4M
300 A @ 100%
5M
W000384973
3M
W000384971
W000384975
WST2 - 4W
4M
360 A @ 100%
5M
W000384976
3M
W000384974
W000384986
W000384987
* Double cooling circuit: Air Liquide Welding patent.
WST2 - 5W *
4M
450 A @ 100%
5M
W000384977
W000384978
W000384979
W000384980
W000384981
W000384982
W000384983
W000384984
W000384985
63
COLLECTION UNITS FOR USE WITH THE SUCTION TORCHES
PHV 25
MODULO HV 35
2015-034_ret
■ Single-phase unit with filtration for
maintenance and light work
■ Two 1000-watt motors
■ 230 m3/h max. with 22,000 Pa
maximum suction
■ Controlled by the welding current
Classification
CE
able
Also availLOW
F
L
in DUA n
versio
■ Three-phase industrial unit
with filtration as an option
for heavy-duty use
■ Two motor power ratings:
1.5 and 2.2 kW
■ 250 m3/h max. with 22,000 Pa
maximum suction
■ 310 m3/h max. with 30,000 Pa
maximum suction
■ Controlled by the welding current
2015-819
for all dry
Dedicated sive dusts
non explo
Cat. nr: W000340019
Cat. nr: W000340023
Option
Cartridge filter:
ESSENTIAL TE35
■ Mounting of this unit is done
vertically, placed on the ground,
horizontally or fixed on the wall
through the rear plate of the
turbine
■ Motor 3 kW, weight 51 kg
2012-466
■ 400 V - 3 phase turbine ensuring
for 1 or 2 torches a suction of a
flow from 80 to 135 m³/h
■ Integrated metal pre-filter
■ Provided with an arc detection
sensor
■ Maximum flow 310 m³/h,
maximum vacuum 30 000 Pa
Cat. nr: W000278334
SUCTION TABLE
ASM WELDING / GRINDING TABLES
■ Metallic pre-filter under the worktop
in metallic grating
■ Dusts collection hopper with a drum
■ Fumes and dusts are collected
through the worktop and the side
panels (height 500 mm)
■ Table 1 200 x 800 mm: dimensions
of the worktop 1 070 x 740 mm
64
■ Table 2 000 x 800 mm: dimensions
of the worktop 1 870 x 740 mm
■ Maximum load 200 kg
■ Height of the worktop 920 mm
■ Table to be connected to a single fan
or to a centralised network collector
ASM table
1 200 x 800 mm
2 000 x 800 mm
Cat. nr
W000342583
W000342584
Cat. nr
W000340608
FUME EXTRACTION
Classification
CE
MOBIFILTER 50M (mobile unit)
does
This unit e gas.
th
not filter e used
b
It must space.
n
in an ope
2012-291
■ Motor power: 750 W
■ Fan flow: 2400 m3/h
■ Filtration is provided by a 50 m2
surface cellulose cartridge.
tion
and filtra
Extraction fumes during
lding
of dry we ive works.
intens
■ A choking indicator signals when
the cartridge must be replaced.
■ PICKFUME and EASY PICKFUME arms
■ Air flow at the nozzle: 1200 m3/h
Designation
Supply
Cat. nr
MOBIFILTER
50M
230V - single phase 50 Hz
230V - three phase 50 Hz
400V - three phase 50 Hz
W000371997
W000371998
W000371999
Designation
Long
Cat. nr
EASY PICKFUME
arm
3m
4m
W000372020
W000372022
Designation
Long
Cat. nr
PICKFUME arm
3m
4m
W000372010
W000371987
Options
Lamp + auto start
ARTICULATED
WALL MOUNTED
SUCTION ARM
PICKFUME 3 or 4 meters
ARTICULATED WALL
MOUNTED SUCTION
ARM EASYPICKFUME
3 or 4 meters
■ Ø 203 mm with hood
ROTAHOOD 360°
■ Balancing sytem
BALANCE WHEEL
■ FAN 28 400 V x 3Ph - 750 W
■ Wall mounting support
■ On/Off disconnecter box
2011-390
of
Extraction
g
in
ld
e
w
dry
d
n
a
s
e
m
fu
dusts
2012-290
2012-289
2011-390
■ Ø 203 mm articulated suction arm with hood
■ Air flow at the nozzle: 1 200 m3/h
■ Balancing sytem EASYLIFT
■ FAN 28 - 400 V x 3Ph - 750 W
■ Wall mounting support
■ On/Off disconnecter box
Kit* 400 V threephase
Cat. nr
Kit* 400 V threephase
Cat. nr
3 meters arm
4 meters arm
W000342863
W000342864
3 meters arm
4 meters arm
W000342861
W000342862
* kit comprising the PICKFUME arm
+ the FAN 28 fan + wall mounting support
+ disconnecter
Cat. nr
W000341024
* kit comprising the EASYPICKFUME arm
+ the FAN 28 fan + wall mounting support
+ disconnecter
65
AUTOMATION POSITIONER
2008-316
2008-318
2016-427
POSITIONER: 100 kg to 3 tons
POSIMATIC P2E
POSIMATIC PS03
100 kg at 175 mm from the plate
200 kg at 130 mm from the plate
300 kg at 253 mm from the plate
2016-425
2016-421
POSIMATIC P1E
POSIMATIC PS08
POSIMATIC PS15
800 kg at 202 mm from the plate
1500 kg at 216 mm from the plate
C1 = (B+D) x P
D
B
A
G
G
G: center
of gravity
P
P
Rotation torque
POSIMATIC PS30
Tilting torque
3000 kg at 211 mm from the plate
Load all
positions kg
Tilt torque
m.kg (C1)
Rotation torque
m.kg (C2)
Rotation
speed tr/min
Turntable
height mm
Remote control
or pedal
Plate
dimension
Axis-plate
distance mm (D)
Cat. nr
P1E
100
25
2
0.2 to 5
385
Pedal
Ø 300
75
W000315254
P2E
200
40
4
0.25 to 5
500
Pedal
Ø 400
70
W000315256
PS03
300
100
35
0.2 to 3
660
RC + Pedal
Ø 600
80
W000385391
PS08
800
280
120
0.16 to 2.4
848
RC + Pedal
Ø 800
148
W000385392
PS15
1500
550
225
0.14 to 1.8
1051
RC + Pedal
Ø 1000
151
W000385393
PS30
3000
1300
450
0.1 to 1.5
1222
RC + Pedal
Ø 1200
222
W000385394
Name
66
2016-430
C2 = A x P
AUTOMATION POSITIONER
POSITIONER: Heavy load
TPS 60 et TPS 180
■ Affichage de la vitesse de rotation
TPS 60
TPS 180
Charge toutes positions 60 kg.
Pour commander
W000382332
Options:
Support
de torche
W000382334
POSIMATIC conventional
TP range. From 4 tons
to 30 tons
Désignation
TPS 180
Pour commander
W000382333
Options:
Support
de torche
Contrpointe,
course 100 mm
W000382334
2015-436
Désignation
TPS 60
Charge toutes positions 180 kg.
2015-432
■ Soudage avec 1 ou 2 torches
■ Cycle manuel ou automatique
■ 1 tour + recouvrement
■ Retard au démarage
■ Mode séléction 2T / 4 T
■ Inclinaison manuelle du plateau
■ Alimentation 230 VAC
W000382335
2014-179
2008-398
POSIMATIC 3 axes
with lifting TPE range.
1.5 tons and more
CONSULT US
CONSULT US
HL RANGE
HL RANGE with synchronized lifting movement for
2014-180
manual manipulation or integrated on machine.
The HL machine is composed of:
- HLM:
motorized
headstock
- HLF:
idler
headstock.
2012-733
Special HEADMATIC 3 axes:
HL3A
Rotation torque
m.kg (C1)
Rotation
speed tr/min
3000
250
0.1 to 1
HLM+F 2x4
8000
500
0.1 to 1
HLM+F 2x6
12000
720
0.1 to 1
HLM+F 2x8
16000
960
0.1 to 1
HLM+F 2x10
20000
1200
0.1 to 1
HLM+F 2x16
32000
1900
0.1 to 1
HLM+F 2x1.5
We can propose the HLM without the idler headstock
and the load capacity is half of the HLM+F load capacity.
Cat. nr
CONSULT US
CONSULT US
2012-736
Load capacity
kg
Designation
Possibility to propose
HEADMATIC 3 axes
up to 20 tons
67
AUTOMATION ROTATOR
ROTAMATIC: 2 tons to 30 tons
2015-838
■ Single powered (one drive roller) for small unbalance work piece.
■ Double powered (two drive rollers) for work pieces having significant unbalance.
■ Roller-to-roller center distance adjusting by screw (except for ST 2: by step).
ROTAMATIC 2T
2015-419
2015-829
ROTAMATIC 6T
2008-447
Digital
display
ROTAMATIC LP
42 T to 200 T*
2015-847
2015-853
*even 600 T.. consult us
ROTAMATIC 15T
ROTAMATIC 30T
Several options available as steel rollers, lorry... Other load capacity on request
Designation
ROTAMATIC:
ST 2
ST 6
ST 15
ST 30
68
MT
M
W
F
M
W
F
M
W
F
W
F
Cat. nr
W000315290
W000315289
W000315288
W000315291
W000315297
W000315296
W000315298
W000315304
W000315303
W000315305
W000315309
W000315310
Load capacity
(1 drive + 1 idler)
kg
Load capacity
per section
kg
Shell
diameter
mm
Peripherical
speed
cm/min
Wheel dimension
OD x width
mm
2000
1000
30 to 2500
12 to 120
Ø 150 x 50
Wheel
material
Polyurethane
Polyamide
6000
3000
300 to 3500
12 to 120
Ø 250 x 75
Polyurethane
15000
7500
300 to 4000
12 to 120
Ø 250 x 110
Polyurethane
30000
15000
350 to 4500
12 to 120
Ø 350 x 150
Polyurethane
Keys: M = Single motorisation - W = Double motorisation - F = Idler roller - MT = Single motorisation with tube system
AUTOMATION CARRIAGE
WELDYPOCKET
WELDYCAR NV
WELDYSTIFFENER
2012-199
2012-195
2008-509
2012-196
Carriages for MIG/MAG welding
WELDY-RAIL
Autonomous carriage with rechargeable battery. MIG/MAG welding with manual equipment.
Flat position welding,
small footprint.
Basic application,
easy implementation.
All positions welding
(permanent magnet).
Welding with 2 manual
welding torches.
Programmable carriage.
Exists in 3 models:
■ WELDYCAR NV - speed 5 – 70 cm/min, Exists in 2 models:
■ WELDYCAR S NV - speed 15 ■ for height: 60-160 mm,
140 cm/min,
■ for height: 120-320 mm.
■ WELDYCAR SP - speed 15
- 140 cm/min with programmation
(continuous welding or not).
All positions welding of
carbon steels, stainless
steels and aluminium.
Exists in 2 models:
■ WELDY-RAIL manual,
■ WELDY-RAIL with linear oscillating.
2 rail models:
■ Magnetic rail,
■ Pneumatic rail.
Welding of stiffeners
in ship yards.
Angle, butt, overhead and
vertical welding.
The carriage is travelling
on a magnetic or pneumatic rail
according the piece to be welded.
5 - 70 cm/min
or 15 - 140 cm/min
15 - 180 cm/min
5 - 80 cm/min
140 x 240 x 220 mm
250 x 300 x 260 mm
500 x 500 x 600 mm
220 x 270 x 230 mm
Weight
(netto)
5 kg
11 kg
16 kg
7 kg
Cat. nr
W000274909
NV: W000315589
S NV: W000315588
SP NV: W000315587
On request
On request
Arc protection
Pendular oscillating unit: W000315474
Linear oscillating unit: W000276068
Magnetic crabbing rails,
aluminium wheels...
many other options
consult us.
-
Linear oscillating unit:
W000276068
In version WELDY-RAIL
with oscillating unit.
Applications
This carriage is used
to facilitate the implementation
of a regular welding.
Boiler making
in carbon steel.
Angle, butt, overhead
and vertical welding
with guidance by
crabbing arm.
15 - 120 cm/min
Main features
Dimensions
(L x l x h)
Options
o
plete inf
See com itionning
os
about P t in our
en
m
Equip
d
t
a
dedic e
e
r
u
h
broc
MEGATRAC 6 carriage
Carriage for Submerged Arc Welding: Consult us
2008-337
Carriage
speed
69
AUTOMATIC CUTTING
Air Liquide Welding proposes a wide range of solutions for thermal cutting (oxyflame or plasma).
Portable carriages are easy to use everywhere equipment
for small cutting works in workshops or on site applications
PYROTOME CNC
Dedicated to mechanised
ed
oxycutting of pipes withh
external diameter
from 6” (150 mm)
to 48” (1 200 mm)
and with 5 to 50 mm
thickness.
Cuts are:
■ straight or beveled
(± 45°) when the machine
is equipped with one torch
■ X or Y bevels when the
machine is equipped with
2 torches and accessories
On rail motorized carriage with a 10 to 125 cm/min
speed allowing to performs straight
or beveled cuts. It’s a rugged
solution for heavy duty works.
PYROTOME SE is equipped
as standard with oxyflame
torch and in option can
be used with an air
plasma cutting power
source.
PYROTOME CNC is a small mechanized machine
integrating a digital controller for cutting on metal sheets
format of 1 000 x 2 000 or 1 500 x 3 000. The programming
is carried out from a library of standard shapes integrated
in the digital controller or from the drawing and nesting
software included in the package. Equipped with one
oxycutting torch or one plasma air installation,
PYROTOME CNC is simple to implement, versatile,
rugged and economical.
0950-30
2015-486
PYROTOME SE
2188-05
TAGLIATUBI
Fully automatic cutting tables among the large
range of solutions that Air Liquide can propose
here are 2 machines
Easy to use, versatile, efficient and cost effective single-piece
plasma cutting machine. It has been specifically designed
for industry areas such as, small and medium boiler making
operations, building hardware, metal work, production of interior fittings,
ngs,
ventilation & air-conditioning, sheet metal work and street furniture
manufacturers. EASYTOME has PC-based numerical controls with a
high-quality screen. The EASYTOME concept relies on fast and simple
le set up,
by its design software and integrated tool path, the procedure for cutting
tting one
or more pieces is made extremely simple and fast. It is fitted with a
NERTAJET 40i industrial type plasma power source that can cut carbon
bon steels,
stainless steels or light alloys (aluminium). Thickness range: sheet edge
dge up to 40 mm
and mid plate sheet: up to 12 mm. Angular cutting quality is range 4-5
-5 as per ISO 9013.
EASYTOME is available in several sizes: 1 000 x 2 000 mm, 1 500 x 1 500 mm, 1 500 x 3 000 mm, 2 000 x 4 000 mm.
OPTITOME 2
High quality plasma cutting requires more and more accuracy.
2015-633
70
The machine is designed to offer all the characteristics
required for HP machine tool operation:
■ high-precision guidance along the X, Y and Z axes
through the use of linear guideline systems
■ high-quality drive guaranteed by the use of ethercat
brushless motors 750W
■ tough railways with rigid structure perfectly suited to
process requirements.
OPTITOME 2 allows HP cuts and marking of all metallic
materials on thickness from 0.5 to 50 mm.
2015-483
EASYTOME
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising