DELPHYS MP elite
DELPHYS MP elite
Three-phase UPS
from 80 to 200 kVA
your protection up to 1200 kVA
The solution for
> Industry
> Telecommunications
> Processes
Advantages
Flywheel
DEFYS 121 B 1 CAT
COMPATIBLE
High quality power supply
Battery availability at all times
• The SVM digital modulation (Space Vector
Modulation) fitted to the transformer integrated
downstream of the inverter allows supply to
your installations with:
- precise voltage even when the load between
phases is completely unbalanced,
- stable output voltage during significant and
quick variations in loads (± 2% in less than
5 ms).
• High output power quality to supply sensitive
loads.
• A very high short-circuit capacity which
facilitates the selection of protective devices for
selectivity in the downstream distribution.
• An isolation transformer is installed on the
inverter output to ensure complete galvanic
isolation between DC circuit and load output.
This insulation also provides a separation
between the two inputs when they are supplied
by different sources.
• An innovative load algorithm which adapts to
the environmental conditions and the condition
of the battery to increase its life.
• A highly-developed monitoring system, capable
of locating and correcting any problems
interacting with the charging device.
High availability
• A fault-tolerant architecture with redundancy of
basic functions, such as the ventilation system.
• A variety of architectures for parallel operations,
to deal with redundancy, management and
changes in power output.
• The ideal solution for grouping with generator
sets without using an excessively large
generator.
Cost-effective equipment
• A “clean” IGBT rectifier. The power factor and
THDI at the rectifier input are constant whatever
the battery charge status (continuous voltage
level) and the load rate of the UPS. It eliminates
any disturbance on the upstream network
(transformer, generator set and distribution).
• The cutting rectifier guarantees the supply
of current with an exceptionally low rate of
harmonic distortion.
• Reduced current consumption thanks to an
input power factor of 0.99 without derating, and
constant in every situation.
User-friendly operation
• A control panel with graphic display for more
ergonomic operation.
• An array of “com-slot” plug-in communication
interfaces, for upgrading your operating
requirements evolution.
Simplified maintenance
• An advanced diagnostic system.
• A remote access device connected to the
remote maintenance centre.
• Easy access to subassemblies and
components, facilitating tests and reducing
maintenance time (MTTR).
28
Catalogue 2013
DELPHYS MP elite
from 80 to 200 kVA
Three-phase UPS
Parallel systems
Electrical options
Communication options
• Modular parallel up to 6 units, development
without constraint.
• Distributed or centralized bypass,
progressive development.
• Twin-channel architecture with Static
Transfer Systems.
• BHC UNIVERSAL.
• EBS (Expert Battery System).
• FLYWHEEL compatible.
• ACS synchronisation system.
• Redundant electronic power supplies.
• GTS (Graphic Touch Screen).
• ADC interface (configurable voltage-free
contacts).
• RS232, RS422, RS485 serial port JBUS/
MODBUS or PROFIBUS.
• MODBUS TCP interface (JBUS/MODBUS
tunneling).
• BACnet/IP interface.
• NET VISION: professional WEB/SNMP
interface for UPS monitoring and shutdown
management of several operating systems.
Standard electrical features
• Slots for 7 communication cards.
• Backfeed protection: detection circuit.
• Standard interface:
- 3 inputs (emergency stop, generating set,
battery protection),
- 4 outputs (general alarm, back-up, bypass,
preventative maintenance needs).
• Parallel connection up to 6 units.
Mechanical options
• Reinforced IP protection degree.
• Ventilation filters.
• Redundant ventilation with failure detection.
• Top entry connection.
Remote monitoring service
• Remote mobile and web-based surveillance
service connected 24/7 to your local
Socomec Service Centre.
Technical data
Sn [kVA]
Pn [kW]
Input / output
Parallel configuration (distributed or centralised bypass)
INPUT
Rated voltage
Voltage tolerance
Rated frequency
Frequency tolerance
Power factor / THDI
OUTPUT
Rated voltage
Voltage tolerance
Rated frequency
Frequency tolerance
Total output voltage distortion - linear load
Total output voltage distortion - non-linear load
Short-circuit current
Overload
Crest factor
Power factor without derating
BYPASS
Rated voltage
Voltage tolerance
Rated frequency
Frequency tolerance
EFFICIENCY
Online mode
Eco Mode
ENVIRONMENT
Operating ambient temperature
Relative humidity
Maximum altitude
Acoustic level at 1 m (ISO 3746)
UPS CABINET
Dimensions W x D x H
Weight
Degree of protection
Colours
STANDARDS
Safety
EMC
Performance
Product declaration
80
64
100
80
DELPHYS MP elite
120
96
3/3
up to 6 units (distributed or centralised bypass)
160
128
200
160
380 V - 400 V - 415 V(1)
340 to 460 V
50/60 Hz
45 to 65 Hz
0.99 constant / 2.5 % without filter
380 V - 400 V - 415 V (configurable)(1)
< 1 % (static load), ± 2 % in 5 ms (dynamic load conditions from 0 to 100 %)
50/60 Hz
± 0.2%
< 2%
< 4%
Up to 3.5 In
150 % for 1 minute, 125 % for 10 minutes
3:1
0.9 lagging to 0.9 leading
380 V - 400 V - 415 V
± 10% (selectable)
50/60 Hz
± 2% (configurable for GenSet compatibility)
94%
98%
65 dBA
from 0 °C up to +35 °C (from 15 °C to 25 °C for maximum battery life)
0 % - 95 % without condensation
1000 m without derating (max. 3000 m)
67 dBA
1000 x 800 x 1930 mm
860 kg
IP20 (other IP as option)
RAL 9006
740 kg
1020 kg
IEC 62040-1-2, IEC 60950
IEC 62040-2
IEC 62040-3
CE
DCG 129013
(1) Others on demand. - (2) As per power range.
www.socomec.com
Non contractual document.
© 2013, Socomec SA. All rights reserved.
Catalogue 2013
29
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement