TP SERIES
TP SERIES
extreme lightweight
loudspeaker system
www.trevisaudio.com
hotline@trevisaudio.com
TP-F081
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
1
Frequency Response
68Hz-19kHz ±3dB (45 Hz - 19 kHz ±3dB with TP-S115 Subwoofer)
Usable Frequency Range (-6dB)
Sensitivity 1W @ 1m
2
1
62Hz 20kHz (40 Hz - 20 kHz with TP-S115 Subwoofer)
96 dB SPL Nominal, 94 dB SPL Wideband
Nominal Peak SPL @ 1m 2
125 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency
3
2200 Hz passive, with HF protection
Nominal Impedance
Recommended Amplifiers
8 Ohm
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 8” Neodymium motor 8 Ohm driver
2” (51 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.4” (36 mm) voice coil, Mylar diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
415 x 280 x 280 [mm]
Weight
7 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), flying points (optional)
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simpler installation and
lower cost.
uSupported with stand
mounting and optional
flying accessories.
TP-F081 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TP-F loudspeakers with system EQ. Half-Space Anechoic radiation for the TP-S115 with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTP-F081, 400 to 1000 Watts to 4 Ohms for 2xTP-F081
www.trevisaudio.com
hotline@trevisaudio.com
TP-F101
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
1
Frequency Response
65Hz-19kHz ±3dB (45 Hz - 19 kHz ±3dB with TP-S115 Subwoofer)
Usable Frequency Range (-6dB)
Sensitivity 1W @ 1m
2
1
60Hz 20kHz (40 Hz - 20 kHz with TP-S115 Subwoofer)
98 dB SPL Nominal, 96 dB SPL Wideband
Nominal Peak SPL @ 1m 2
127 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency
3
2100 Hz passive, with HF protection
Nominal Impedance
Recommended Amplifiers
8 Ohm
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 10” Neodymium motor 8 Ohm driver
2.5” (65 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.4” (36 mm) voice coil, Mylar diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
475 x 340 x 330 [mm]
Weight
9 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), flying points (optional)
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simpler installation and
lower cost.
uSupported with stand
mounting and optional
flying accessories.
TP-F101 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TP-F loudspeakers with system EQ. Half-Space Anechoic radiation for the TP-S115 with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTP-F101, 400 to 1000 Watts to 4 Ohms for 2xTP-F101
www.trevisaudio.com
hotline@trevisaudio.com
TP-F121
extreme lightweight
fullrange loudspeaker
SYSTEM SPECIFICATIONS
1
Frequency Response
62Hz-20kHz ±3dB (45 Hz - 20 kHz ±3dB with TP-S115 Subwoofer)
Usable Frequency Range (-6dB)
Sensitivity 1W @ 1m
2
1
58Hz 21kHz (40 Hz - 21 kHz with TP-S115 Subwoofer)
99.5 dB SPL Nominal, 97.5 dB SPL Wideband
Nominal Peak SPL @ 1m 2
129 dB SPL
HF Dispersion
90° Horizontal x 60° Vertical, rotatable horn
Crossover Frequency
3
1700 Hz passive, with HF protection
Nominal Impedance
Recommended Amplifiers
8 Ohm
4
Trevis Audio TAD1004, TAD1504
PRODUCT FEATURES
Components: Low Frequency
1 x 12” Neodymium motor 8 Ohm driver
2.5” (65 mm) voice coil
High Frequency
1 x 1” throat compression driver + low distortion CD horn
1.7” (44 mm) voice coil, Titanium diaphragm, Ferrofluid™ cooling
Connectors
2 x Neutrik SPEAKON™ 4 pole
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
560 x 400 x 390 [mm]
Weight
11.5 kg
Handle
Integral, on top of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), flying points (optional)
PRODUCT FEATURES
uHigh power systems with
8”, 10” and 12” LF and 1”
HF drivers.
uFerrofluid® cooled HF
drivers with self resettable
overload protection.
uRotatable 90°x60°
constant directivity horn
and unique cabinet
architecture ensure
versatility; user adaptable
for both PA and stage
monitoring applications.
uTwo-way passive 8 Ohm
design uses a single
amplifier channel for
simpler installation and
lower cost.
uSupported with stand
mounting and optional
flying accessories.
TP-F121 SYSTEM
APPLICATIONS
uNear-field touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TP-F loudspeakers with system EQ. Half-Space Anechoic radiation for the TP-S115 with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Nominal refers to Voice Decade (300 Hz - 3 kHz), Wideband to the specified ±3dB
range. Data are for speaker + processor + recommended amplifier combinations (500Wrms to 8 Ohms).
[3] Acoustical crossover frequency - at this frequency, the transducers produce equal sound pressure levels.
[4] Any other clip-limited power amplifiers can be used which can deliver 200 to 500 Watts into 8 Ohms for 1xTP-F121, 400 to 1000 Watts to 4 Ohms for 2xTP-F121
www.trevisaudio.com
hotline@trevisaudio.com
TP-S115
extreme lightweight
Subbass extension for
TP-F speakers
SYSTEM SPECIFICATIONS
1
Frequency Response
45 Hz 2000 Hz ±3dB
Usable Frequency Range (-6dB)
Sensitivity 1W @ 1m
2
1
40 Hz 2000 Hz ±3dB
97 dB SPL
Nominal Peak SPL @ 1m 2
129 dB SPL
Crossover Frequency
250 Hz passive (can be bypassed with switch on connector panel)
Crossover Output
250 Hz passive highpass-filter (see system operation)
Nominal Impedance
8 Ohm
3
Recommended Amplifiers
Trevis Audio TAD 2008
PRODUCT FEATURES
Components: Low Frequency
1 x 15” Neodymium motor 8 Ohm driver
3” (76 mm) voice coil
Connectors
2 x Neutrik SPEAKON™ 4 pole
System Operation
2+, 2- terminal on 4 pole SPEAKON™ is the passive highpass filtered output for
TP-F loudpeakers to combine TP-S115 and TP-F081 or TP-F101 spakers as a
passive satellite system, which can be easily driven from a single amplifier channel
giving the user a very simple and cost effective way to create a high quality
extended range loudspeaker system
Construction
Special extreme lightweight plywood cabinet with bracing
Height x Width x Depth
640 x 430 x 540 [mm]
Weight
15 kg
Handle
Integral, on both sides of the cabinet
Cabinet Finish
Textured durable black polyurethane coating
Front finish
AcuFoam™ on perforated steel grille
Stand fittings
Built in Stand Fitting, 35mm (1”3/8), flying points (optional)
PRODUCT FEATURES
uHigh power bass
extension with 15” LF
driver for TP-F range
speakers.
uEasy set up and cabling
uBuilt in bypassable
passive low-pass filter and
passive high-passed
output for TP-F081 or TPF101 speakers
uSupported with stand
mounting and optional
flying accessories.
TP-S115 SYSTEM
APPLICATIONS
uHigh power touring,
installed PA for clubs,
A/V,theater, broadcast, etc.
uHigh quality , high power
stage monitoring for clubs,
A/V, theater, broadcast,
etc.
uFill-in system in
conjunction with larger
Trevis Audio systems.
[1] Response curves & data : Anechoic Far Field for the TP-F loudspeakers with system EQ. Half-Space Anechoic radiation for the TP-S115 with system EQ.
[2] Sensitivity & Peak SPL data. Measured with band limited Pink Noise (6dB crest factor). Data are for speaker + processor + recommended amplifier
combinations (700 Wrms to 8 Ohms).
[3] Any other clip-limited power amplifiers can be used which can deliver 500 to 800 Watts into 8 Ohms for 1xTP-S115, 1000 to 1600 Watts to 4 Ohms for 2xTP-S115
www.trevisaudio.com
hotline@trevisaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising