i12SUB is a horn-loaded low frequency enclo

i12SUB is a horn-loaded low frequency enclo
i12SUB is a horn-loaded low frequency enclosure featuring proprietary loading (patent pending). As
a horn-loaded design i12SUB is able to maintain high
efficiency and extremely fast peak response with low
distortion even at high sound pressure levels.
i12SUB features single 12” neodymium cone
driver. Unique enclosure design also enables the use
of 15mm birch plywood still maintaining rigidity with
free of unwanted vibrations. This makes the enclosure
lighter than average without using fibre-class or other
composite materials.
i12SUB will probably outperform any other subwoofer in its class and size. Dedicated touring version
and cardioid presets also available.
small to medium size installations
low frequency extension for i12 and i6
single high excursion 12” cone driver
unique patented horn design
extreme power to size ratio
rugged birch plywood construction
textured semi-matt black paint finish
Frequency Response (-10 dB): 50 Hz – 400 Hz
Horizontal Coverage (-6 dB): 360 degrees
Vertical Coverage (-6 dB): 360 degrees
Max SPL : 126/132 dB (half space)
Sensitivity, 1w/1m: 96 dB (free space)
Impedance: 8 ohms
Crossover: 80 Hz – 120 Hz active
Power handling: 500 W cont, 2000 W peak
Recommended HP-filter: 40 Hz, 12 dB/octave
LF: (1) x 12” neodymium magnet cone driver, 3” voice coil
Enclosure material: Birch plywood, textured black paint finish
Grille: Cold rolled steel grille, textured black paint finish
Connectors: (2) x NL4, +/-1: Input, +/-2: Linked
Dimensions: 550 mm x 370 mm x 550 mm
Weight: 20 kg
i12SUB x (2): D24-i12SUB, Stereo (1) x i12SUB
i12SUB x (4): D27-i12SUB, Stereo (2) x i12SUB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF