advertisement
R
24
LED COLOR TV
SC-2412
R
Table Of Contents
Preparations Guide
Safety Information.................................................................................................................2
Important Safety Precautions.................................................................................................3
Installed And Connected TV
TV Bracket assemble.............................................................................................................4
TV Buttons And Terminal Interface........................................................................................ 5
External device connection diagram................................................................... 6
Remote Controller............................................................................................................7
Install And Connect TV...........................................................................................................8
TV Stand installation Instructions.......................................................................8
Setup Wizard
Setup Wizard ...............................................................................................................9
Select Input Source
Select Input Source........................................................................................................................ 10
TV
Mai n Men u Op eration................................................................................................12
Sound Menu.........................................................................................................14
Time Menu.....................................................................................................16
Setup Menu........................................................................................................................17
Close Caption........................................................................................................................18
Lock Caption........................................................................................................................21
US Rating........................................................................................................................23
TV ........................................................................................................................23
MAPP ........................................................................................................................24
Cananda Rating.........................................................................................................................24
Hotel Menu.........................................................................................................................25
Channel Menu.........................................................................................................................27
PC
PC Menu......................................................................................................................................29
Other Information
DVD Setup ..........................................................................................................................31
Help......................................................................................................................................33
Specifications.......................................................................................................................34
This user manual for reference only
1
Safety Information
High voltages are used in the operation of this product.to reduce the risk of electric shock,do not remove cover of the cabinet, refer servicing to qualified service personal
If the TV any changes or coarse adjustment, electric shocks to be hurt, do not attempt to open a machine-maintenance, customer contact centres needed overhaul.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operting in the literature accompanying the appliance.
Warning
The lightning flash with arrowhead symbol within an equilateral triangle,is inten ded to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
2
Important Safety Precautions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and third grounding prong. The wide blade or third prong are
provided for your safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used caution when
moving the cart/apparatus combination to avoid injury tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped. Warning to reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
15. The apparatus shall be disconnected from the mains by placing the power/standby
switch in the standby position and unplugging the power cord of the apparatus from
the AC mains receptacle.
16. The socket-out shall be installed near the equipment and shall be easily accessible.
17. This product should never be placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the manufacturer's instructions have
been adhered to.
18. Apparatus shall not be exposed to dripping or splashing.
19. Do not place any sources of danger on the apparatus (e.g. liquid filled objects,
lighted candles).
20. Wall or Ceiling Mounting - The appliance should be mounted to a wall or ceiling
only as recommended by the manufacturer.
21. Never place the TV, remote control or batteries near naked flames or other
heat sources, including direct sunlight. To prevent the spread of fire, keep
candles or other flames away from the TV, remote control and batteries at
all times.
22. The USB terminal should be loaded with 0.5 A under normal operation.
3
TV Bracket assemble
Fix the TV on the wall
1.First,put the TV on the table smoothly and put some soft cloth on the table to avoid
scratching the screen.
2.User the screw driver to take off the screws which are fixed on the bottom stand
(the direction of the arrow, refer to the ptoto1).And take off the bottom stand(please
take off the screws and bottom stand carefully).
3.Make one bracket which can fix on the wall according to the size of arrow direction
of photo2 and photo3.
4.Drill four holes properly on the wall (the size only for reference) and put into four
screws.(optional parts) Drill four holes properly on the wall (the size only for reference)
and put into four screws.(optional parts)
5.according to the step 4,use the screwdriver to lock the screw on the back of the TV.
then hang the TV on the wall.
1 2
4
3
Note:
1.The bracket fixed on the wall is optional part.
2.when you assemble the TV, there should be no other articles on the around and front
and please keep the distance from other articles.
3.When assemble the TV, please ask the career man to fix in order to avoid the danger.
4.The fixing picture is only for reference.
5.Please follow the use manual about bracket assemble to fix the TV.
6.Attach the mounting bracket from the VESA compatible wall mounting kit.
4
TV Buttons And Terminal Interface
R
DVD
Insert disc with shiny side facing the front
of TV.
8 9
COAXIAL
VIDEO
INPUT
L R
AC 100-240V~
50/60Hz
14 13
HDMI
6 10 7
Y
INP UT
Pb Pr
12 11
YPbPr:Color difference components input and relevant video input
9. AV
: external AV
signal input and relevant right/left
sound channel.
VGA/AUDIO: VGA audio input.
(3.5mm)
Ω
the antenna input.
HDMI Input: Digital signal input from
HDMI video connector
14.USB:
Only used for updating soft ware
5
External device connection diagram
DVD
Set-top boxes
HDMI
HDMI input connection
HDMI
VIDEO
INPUT
R L
AV input connection
AV input connection
Y
INPUT
Pb Pr VIDEO
INPUT
R L
Y Pb Pr input connection
USB connection
TV connection
VGA input connection
OUTPUT
R L
AV output connection
6
Remote Controller
SLEEP: Select amount of time before TV turn automatically.
S.MODE: Press to cycle through the different sound settings
P.MODE: Press to cycle through the different picture settings
P.MODE
S.MODE
MENU
SLEEP
SOURCE
ENTER
MTS / MP3PROG:
Press to select the audio mode,you can select stereo,Mono, or SAP(second audio program)./When playing mp3 disc, press MP3 PROG and add the favorite music to playlist, press PROG two times to see the programmed playlist.
EPG:
D.Setup:
CH +/- : Press to scan through or to select a channel.
V +/-: Press to increase / decrease the sound level.
D.MENU:
D.TITLE:
GOTO:
D.DISP:
EXIT DISPLAY
FAV
MTS / MP3PROG
EPG
D.setup
FAV+ FAV-
REV FWD PREV NEXT
ZOOM
Zoom
D.MENU
D.Menu
PROG
PROG
ANGLE
Angle
D.TITLE
D.Title
STEP
STEP
AUDIO
Audio
GOTO
Goto
REPEAT
REPEAT
SUBTITLE
Subtitle
D.DISP
D.Disp
A-B
A-B
R
Press "-" to enter a program number for multiple program channel, such as 2-1 etc.
TV AV YPbPr DVD HDMI PC
ZOOM In DVD source adjust DVD picture size
STEP：Play for single frame image
A-B
During the playback,press this button to repeat playback of a specific section on a disc.
(1)Open the battery compartment cover
on the back side
(2)Insert two 1.5V batteries of AAA type
with correct polarity
(3)Close the battery compartment cover
on the back side
Universal Remote Control code:007F
(Universal Remote control is not included)
7
Install And Connect TV
Set your TV
To put your TV in a firm place which can bear the weight of the TV.
To avoid danger, please don’t expose the
TV near water or heating place (such as light, candle, heating machine),do not block the ventilation at the back of TV.
3
Connect antenna and power
1.Connect the antenna cable to the antenna
socket on the back of the TV.
2.To plug the power cord of TV (AC 100-
240V~ 50/60Hz).
Turn on TV
3.Press the power button of the TV the
indication light will turn to green. if it is
on standby mode (the light is red),press
the power button on the remote control
to turn on the TV.
FM ANT TV ANT
TV signal output
1
Note:
Picture for reference purposes only.
2
TV Stand Installation Instructions
1.Open the carton and remove the TV and scattered accessories and base
(some models without base).
2.to avoid the injury of the TV, covered with a soft mattress, put it on the table, face down on a soft mattress, the base of the neck is fixed on the TV with screws.
3.screw the base and connected to the TV.
4. the installation is complete.
1
3
2
4
8
Setup Wizard
Connect an RF cable from the TV’s input called “RF-In” and to your TV Aerial socket.
Select Language
Press </ > button to select the language to be used for menus and message.
Press ▼ / ▲ button to select go to next step and press ENTER/ button to go.
Select Time
Press ▼ / ▲ button to select the time zone, daylight saving time and time format you want to.
Press </ > button on the remote control to adjust.
Press ▼ / ▲ button on the remote control to select go to next step and press ENTER/ button to go.
9
Setup Wizard
Auto Scan
Press </ > button to select the antenna type.
Press ▼ / ▲ button to select go to next step and press ENTER/> button to start auto scan.
10
Select Input Source
Source Select
TV
AV
Component
DVD
HDMI
PC
Press INPUT button to display the input source list,
Press ▼ / ▲ or
INPUT
button to select the input source you want to,
Press ENTER button to enter the input source,
Press EXIT button to quit.
Main Menu
Press MENU to display the main menu or return to the previous menu or close the main menu.
Press </ > to highlight the desired menu icon, and press ENTER to select.
11
TV
Main Menu Operation
Picture Menu
Pre ss
Press
M
ENTER / ▼
to enter.
</ > butt on to select.
Pre ss
Pre ss
▼ / ▲ button to select among Picture Mode /Brightness/ Contra st / Color / Tint / Sharpness / Color
Tempera tu re / Advanced Sett ings.
Press
ENTER / ▼ to ente r.
Press
Pre ss
</ > butt on to adjust.
M
【Picture Mode】
Adjust picture mode to change picture appearance.
Press
</ > butt on to select(S ta ndard / Dynamic / Soft / User) .
Note :T he bri ghtn ess,c ontra st, color, ti nt and sharp ness are only available in User mode,y ou can adjust as
you like.
Sta ndard Pro duces a highly defi ned image in a norm ally lit ro om.
Dynamic Pro duces a highly defi ned image in a bri ghtl y lit ro om.
Soft Pro duces a highly defi ned image in a soft lit ro om.
User Select to custo mize pictu re sett ings.
【Brig htness】
Adjust th e visual perc epti on outp ut of th e enti re pictu re , it will effe ct th e iuminousness of th e pictu re .
Press
</ > butt on to adjust.
【Contra st】
Adjust th e highlight inte nsity of th e pictu re , but th e shadow of th e pictu re is invari able.
Press
</ > butt on to adjust.
12
TV
【Color】
Adjust th e satu ra ti on of th e color based on your own like.
Press
</ > butt on to adjust.
【Tint】
Adjust the hue(Red,Green,Blue) of the picture.
Press
</ > butt on to adjust.
【Sharpness】
Adjust th e peaking in th e deta il of th e pictu re .
Press
</ > butt on to adjust.
【Color Temperature】
In cre ase or re duce warm color of th e pictu re pers onally(re d),a nd th e cool color pers onally(b lue) accord ing
to your like.
Norm al In cre ase th e sex-l inked colors fo r th e white .
Warm In cre ase th e re d color fo r th e white .
Cool In cre ase th e blue to ne fo r th e white .
【Advanced Settin gs】
Adjust advanced video features to fine tune the picture.
> sub-m enu.
.
【Aspect Ratio】
Adjust how the picture fills the screen.
Normal Automatically adjust Aspect Ratio based on TV size and TV program.
Wide Use to watc h wide scre en(1 6:9 ) conte nt.
Zoom Expands image to fill screen. Top and button maybe cut off.
Cinema Stre tc hes image at edges but keeps a clear image in th e cente r.
【Noise Reductio n】
Set options to reduce video noise.
Off Select to turn off video noise detection.
Low Detect and reduce low video noise.
Medium Dete ct and re duce modera te video noise.
High Dete ct and re duce enhanced video noise.
Auto Dete ct and re duce video noise auto mati cally.
13
TV
【Dynamic Contra st】
Auto mati cally adjust pictu re deta il and bri ghtn ess.
Pre ss </ > butt on to select (O ff/O n).
【HDMI Mode】
Only available in HDMI input.
Press
</ > butt on to select (Video/G ra phic).
Sound Menu
Pre ss
M
</ > butt on to select.
Press
ENTER / ▼
to enter.
Pre ss
M
Pre ss
▼ / ▲ button to select among Equalizer / Bass / Treble / Balance /MTS/ Audio Language /Digital Audio
Outp ut/ AVL .
Press
ENTER / ▼
</ > to ente r.
Press butt on to adjust.
Pre ss
ENU again or back to parent menu.
M
14
TV
【Sound Mode】
Select a sound mode to achieve ideal sound.
Press
</ > butt on to select(S ta ndard / Music / Movie / Sports / User) .
Note :T he bass and tre ble are only available in User mode,y ou can adjust as you like.
Sta ndard Pro duces a balanced sound in all enviro nments .
Music Pre serv es th e ori ginal sound. Good fo r musical pro gra ms.
Movie Enhances tre ble and bass fo r a ri ch sound experi ence.
Sports Enhances vocals fo r TV audio.
User Select to custo mize audio sett ings.
【Bass】
Adjust th e bass effe ct. In cre ases or decre ases lower-p itc hed sounds.
Pre ss </ > butt on to adjust.
【Treble】
Adjust th e tre ble effe ct. In cre ases or decre ases high-p itc hed sounds.
Pre ss </ > butt on to adjust.
【Balance】
Adjust th e balance betw een left and ri ght speakers to adapt to your liste ning positi on.
Pre ss </ > butt on to adjust.
【MTS】
Confi gure s th e multi -tra ck sound.
</ >
It is only available in ATV.
Press butt on to select(M ono/S te re o/S AP).
Mono Sets th e sound to mono.
Ste re o Sets th e sound to ste re o when ste re o is not available, th e sound is auto mati cally switc hed
to mono.
SAP Sets th e sound to th e second audio pro gra m.
【Audio Language】
Select th e language supporte d by th e chosen digita l channel
Press
</ > butt on to select(E nglish /
【Digita l Audio Output】
).
. It is only available in DTV.
Send digital audio to external audio system.
Press
</ > butt on to select.
PCM Select to outp ut audio in 2-c hannel ste re o.
Raw Ori ginal image coded date .
Off Set digita l audio outp ut off.
【AVL】
Set th e auto volume contro l.
Press
</ > butt on to select(O n / Off) .
NOTE:
Balance: This item can adjust the speaker’s output, it enables you to listen to best at your position.
AVL: This item uses for reducing the difference between channel and program’s volume automatically.
it made the overall water to be even. This function will also reduce the fluctuation of the sound.
15
TV
Time Menu
Pre ss
M
</ > butt on to select.
Press
Pre ss
ENTER / ▼
M
to enter.
ENU again to exit or back to parent menu.
Pre ss
▼ / ▲ button to select among Sleep Timer / Time Zone / Daylight Saving Time / Time Format / Auto
Clock / Clock.
Press
ENTER / ▼ to ente r.
Press
</ >
M
butt on to adjust.
Pre ss
【Sleep Timer】
Set a timer for the TV to turn off automatically.
Press
</ > butt on to select(O ff / 5min/1 0min /1 5min/ 30min / 60min / 90min / 120min/1 80min/2 40min).
【
Tim e Zone
】
Select your time zone.
Press
</ > butt on to select(E aste rn / Centra l / Mounta in / Pacifi c / Alaska / Hawaii /S amoa/
Newfo undland / Atl anti c).
【
Dayli ght Savin g Tim e
】
Set the daylight saving time for your area.
Press
</ > butt on to select(O n / Off) .
【
Tim e Form at
】
Select your time format.
Press
</ > butt on to select(1 2-h our / 24-h our) .
【
Auto Clo ck
】
Use to synchro nize th e display auto mati cally.
It is only available in DTV.
Press
</ > butt on to select(O n / Off) .
16
TV
Setup Menu
Pre ss
Pre ss
M
Press
ENTER / ▼
to enter.
M
</ > butt on to select.
Pre ss
▼ / ▲ button to select among Menu Language / Transparent / OSD Timeout / Closed Caption /Over
Scan/ In put Label / Oth er sett ings / Resto re Defa ult / Setu p Wizard .
Press
Press
ENTER / ▼
</ > to ente r. butt on to adjust.
Pre ss
M
【Menu language】
Select an OSD menu language can be displayed.D efa ult English is selecte d as menu language.
Press
</ > butt on to select language(E nglish / Fra nçais / Español).
【Transparent】
Adjust the tra nsparency of the OSD (on screen display) menu.
Press
</ > butt on to select. (0 %,2 5%,5 0%,7 5%,1 00%)
【OSD Time out】
Adjust the duration of the OSD (on screen display) menu.
Press
</ > butt on to select. (5 Sec., 15Sec., 30Sec., 45Sec., 60Sec.
【Closed Captio n】
Adjust Closed Captioning settings. Only available under TV and AV source.
Press ENTER / button to enter.
For detail please refer to page 12.
17
TV
Close Caption
【
CC Mode
】
Turn Closed Captioning on/off.
Press
</ > butt on to select(C C Off / CC On / CC OnMute ).
【
Analo g CC
】
Set Closed Captioning for standard(analog) program.
Press
</ > butt on to select(C C1 / CC2 / CC3 / CC4 / TEXT1 / TEXT2 / TEXT3 / TEXT4).
【
Dig ita l CC
】
Set Closed Captioning for digital program.
Press
</ > butt on to select(O ff / Serv ice1 / Serv ice2 / Serv ice3 / Serv ice4 / Serv ice5 / Serv ice6).
【 ptio n】
Adjust the digital Closed Captioning setting.
Press
> butt on to ente r.
【
Mode
】
Set the look of digital Closed Captioning. Automatic uses broadcaster’s style.
Press
</ > butt on to select(D efa ult / Custo m).
【
Font Sty le
】
Select fro m 8 font styles.
Press
</ > butt on to select(D efa ult / Font 0 / Font 1 / Font 2 / Font 3 / Font 4 / Font 5 / Font 6 / Font 7).
【
Font Siz e
】
Adjust the size of the digital Closed Captioning font.
Pressvbutton to select(D efault /Normal / Large / Small).
【
Font Edge Sty le
】
Adjust the edge of the digital Closed Captioning box.
Press
</ > butt on to select(D efa ult / None / Raised / Depre ssed / Unifo rm / Left Shadow / Right Shadow).
【
Font Edge Colo r
】
Adjust the color of the digital Closed Captioning box.
Press
</ > butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).
【
FG Colo r
】
Adjust the color of the digital Closed Captioning font.
Press
</ > butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).
【BG
Colo r
】
Adjust the digital Closed Captioning background color.
Press
</ > butt on to select(D efa ult/ Black / White / Red / Gre en / Blue / Yellow / Magenta / Cyan).
【
FG Opacity
】
Adjust the tra nsparency of the digital Closed Captioning font.
Press
</ > butt on to select(D efa ult / Solid / Flashing / Tra nslucent) .
【BG
Opacity
】
Adjust the digital Closed Captioning background tra nsparency.
Press
</ > butt on to select(D efa ult / Solid / Flashing / Tra nslucent) .
18
TV
【Over Scan】
Press
</ > butt on to select(O n / Off) .
It is only available to enter 1080i/720p/1080p in DTV/Component/HDMI.Default is On.
It fi xed set to be On in ATV/AV. It fi xed set to be Off in PC/U SB.
【Input Labels】
Create labels for the devices connected to your TV.
Press ENTER / button to enter.
【Other Settin gs】
Set the parameter of audio only, no signal power off and no operation power off.
Press ENTER / button to enter.
【Blu e Scre en】
To select the tra nsition type required while changing fro m one channel to another
Pre ss </ > butt on to select(O n / Off) .
【Audio Only】
Play the audio with the picture turned off. When you turn the Audio Only on and exit the OSD menu,
th e panel will be dark ; and th en pre ss any key to exit th e Audio Only sta tu s.
Press
</ > butt on to select(O n / Off) .
19
TV
【Restore Default】
Change power on options or reset TV to factory default.
>
【Setu p Wiz ard】
Set the first time installation.
>
For detail please refer to page 1~2.
20
TV
Lock Menu
Pre ss
Press
M
</ > butt on to select.
Pre ss
ENTER / ▼
M
to enter.
ENU again to exit or back to parent menu.
Pre ss
▼ / ▲ button to select among Change Password / System Lock / Input Block / US Rating / Canada
Rati ng /R RT Sett ing / Reset RRT/H ote l menu
Press
ENTER / ▼
</ > to ente r.
Press butt on to adjust.
Pre ss
Enter your 4-digital password. Default password is 0000, and if fo rg et what you set, please call th e
serv ice cente r.
21
TV
【Change Password】
Enter a new 4-digital password then re-enter it to confirm.
Press
> butt on to ente r.
【System Lock】
Lock or unlock the buttons on the TV.
Press
</ > butt on to select(O ff / On).
【Input Block】
Block or unblock the input sources.
Press
>
</ > butt on to select(U nblock / Block).
【
US Ratin g】
Restri ct movie and TV programs by US Ratings.
Only available when "System Lock" is "on".
>
For detail please refer to page 16~17.
【
Canada Ratin g】
Restri ct movie and TV programs by Canadian Ratings..
Only available when "System Lock" is "on".
Press button to enter.
For detail please refer to page 17.
【RRT Settin g】
Display an advance V-Chip rating table for digital channels.
The ite m is available only When curre nt stre am has downloadable ra ti ng data .
【Reset RRT】
Reset the RRT to default.
The ite m is available only When curre nt stre am has downloadable ra ti ng data .
【
Hotel Menu】
Press
> button to enter.
For detail please refer to page 17.
22
TV
US Rating
For the United States, the rating setting basically include the following options: TV, MPAA.
TV
The TV rating compose of two aspects: age-based and content-based.
Age
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Define
General audience
Parental guidance suggested
Parents strongly cautioned
Retricted
No one 17 and under admitted
Adult audience only
*Note:
The content ratings will increase depending on the level of the age-based rating.
For example, a program with a TV-PG V(violence) rating may contain moderate violence, while a
TV-14 V(violence) rating may contain intense violence. So locking a higher level option will automatically cause locking the options that has more sensitive level.
23
TV
MPAA
This system defines the rating control which come from MPAA rules.
Rating Define
G
PG
PG-13
R
General audience. All ages admitted.
Parental guidance suggested. Some material may not be suitable for children.
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Restricted. Children under 17 require accompanying parent or adult guardian.
NC-17
X
Off
No one 17 and under admitted.
Adult audience only.
Off
C
C8+
G
PG
14+
18+
Canada Rating
For Canada, the rating setting include the following options: Canada English, Canada French.
Canada English
Canada French
These ratings are for programs which are using
English rating system.
The ratings are for programs which are using
French rating system.
Rating
Defined as
Rating
Defined as
News and sports
Children
Children 8 years and older
General programming
Parental guidance
Viewers 14 and older
Adult programming
Off
G
8 ans+
13 ans+
16 ans+
18 ans+
News and sports
General
Not recommended for children under age 8
Not recommended for children under age 13
Not recommended for children under age 16
This program is restricted to adults
24
Hotel Menu
TV
【Hotel Mode】
Set hotel mode On or Off.
Note: The following settings work only when Hotel Mode is set to be On.
【
Boot Setting
】
【Picture Mode】
Adjust picture mode to change picture appearance.
Press
</ > button to select(Standard / Dynamic / Soft / User).
【Default Volume】
Set the default volume for every time you open the TV, the default volume is 20.
【Max Volume】
Set the max volume that you can adjust.
【Boot Source】
Set the default input source when turning on your TV.
25
TV
【Boot Channel】
Set boot channel On or Off.
Note:Channel Select is available when Boot Channel is set to be On.
【Channel Select】
Set boot default on what channels.After channel searching,channels in the list can be selected.
【Hotel Lock】
To lock the Tuner/Key Pad/Menu Lock that you want.
Channel searching is invalid when Tuner Lock is set to be On
【Power Save】
Set a timer for the TV to turn off automatically.
Available Timer:60Min,120Min,180Min,240Min,Off
【TV to USB】
Backup data to USB.
【USB to TV】
Restore data from USB.
【Reset Hotel Setting 】
Recall the default settings of Hotel menu.
26
TV
Channel Menu
Pre ss
ENU to enter the main menu, Press
</ > butt on to select.
Press
ENTER / ▼
to enter.
Pre ss
Pre ss
▼ / ▲ button to select among Air/C able / Auto Scan / Favorite / channe list / Show/Hide / Channel Number / Channel
Label .
Press
ENTER / ▼ to ente r.
Press
</ > butt on to adjust.
Pre ss
M
【Air/C able】
Select signal ty pe .
Press
</ > butt on to select(A ir/C able).
【Auto Scan】
Automatically search for channels.
27
【
Favorite s
】
Add channels to create a favorite list.
>
【
Channel Lis t
】
Display your program list.
【
Show/H id e
】
Show or hide the channels in your program list.
TV
【
Channel Number
】
Show th e channel number .
Press
</ > butt on to adjust.
【
Channel Label
】
Cre ate labels fo r channels ,u p to 7 chara cte rs
Press
</ > butt on to adjust.
.
28
PC
PC Menu
Pre ss
IN PUT
to select PC sourc e.
Pre ss
ENU to enter the main menu, Press
Press to select PC Settings.
</ > butt on to select Setu p menu.
Pre ss
Press
▼ / ▲ button to select among H-Pos / V-Pos / Clock / Phase / Auto.
ENTER / ▼ to ente r.
Press
</ > butt on to adjust.
M
Pre ss
29
【H-Pos】
Adjust the horizontal position of the picture.
Press
</ > button to adjust.
【V-Pos】
Adjust the vertical position of the picture.
Press
</ > button to adjust.
PC
【Clock】
Adjust the vertical position of the picture.
Press
</ > button to adjust.
【Phase】
Adjust the horizontal interfering lines.
Press
</ > button to adjust.
【Auto】
Adjust to the screen automatically to the optimal position of the picture.
Press
> button to enter.
*Notes:
1. Color,Tint,Sharpness,Noise Reduction,Dynamic Contrast and HDMI Mode in
PICTURE are invalid.
2. MTS and Audio Language in SOUND menu are invalid.
3. Auto Clock in TIME menu is invalid.
4.Close Caption in SETUP menu is invalid.
5.US Rating, Canada Rating, RRT Setting and Reset RRT in LOCK menu are invalid.
6.
PC mode has no CHANNEL menu.
30
DVD Setup
Press the “D.Setup” button to enter the DVD settings menu,use the “ ” buttons to select thedesired menu page (General / Audio / Dolby / Video / Preferences),and use “ ” buttons to select the items in each menu,then use “ ” buttonto enter the selected item. If you then change any setting,press “ENTER” button toconfirm the value you changed.Press the “ ”button to return to the left submenu;to go back up to one of the main DVD menu pages,press
“EXIT” button.
1.General Setup Page
Osd Language:Set the language of the setup menu and screen display.
Screen saver:Set the screen protection.
Last Memory:Remember and resume from the position of the previous playback.
2.Speaker Setup Page
Downmix: This is DVD L/R and stereo output,defaut as stereo output.
3.Dolby Digital Setup
Dynamic:Adjust sound dynamic range
31
DVD Setup
4.Video Setup Page
Sharpness:adjust the sharpness of the image.
Brightness:adjust the brightness of the image.
contrast:adjust the contrast of the image.
5.Preference Page (Note:This menu page will pop up before put the disc into DVD.)
TV Type: Select the local TV system (PAL TV/Multi/NTSC TV)
Audio: Disc audio language selection (disc dependent)
Subtitle: Disc subtitle language selection (disc dependent)
Disc Menu: Disc Menu language selection (disc dependent)
Parental: Set the maximum disc rating (Kid Safe/G/Pg/Pg 13/Pgr/R/Nc 17/Adult) that can be
viewed without a password
(default password is 0000)
Password: Change the password
Default: Choose this to restore the original default Preference settings
31
32
Help
33
Machine Technical Specifications
VGA
Resolution
Vertical frequency hz
HDMI
Format
Vertical frequency hz
640x480
60HZ
480 i/P
60HZ
Parameter specification
800X600
60HZ
576 i/P
50HZ
1024x768
60HZ
1360x768
60HZ
720 P
50HZ/60HZ
Screen Size
24 ”
NTSC / ATSC
PAL, NTSC
CH2~CH69 AIR / CH1~CH135 CABLE
IN:TV, AV, YPbPr, PC AUDIO,VGA, HDMI.
OUT: COAXIAL,EARPHONE .
3W+3W
DC12V 3A AC 100-240V~ 50/60Hz
30W
1920x1080
60HZ
1080 i/P
50HZ/60HZ
NOTE:
This user s manual is for reference only .Specications are subject to change
without notice
34
advertisement