Cooper B-Line Access Cabinet Systems

Access Cabinet Systems
ACSUS-11
Cabinets & Accessories
The cabinet has in the past been considered to be “just a metal box”, simply providing a mounting
structure into which both active and passive equipment is mounted. However, today the cabinet
provides a level of system security, as well as being an integral part of achieving optimal system
operating efficiency. It is important to configure the cabinet to match the operational demands of the
equipment housed inside. By doing so, it helps decrease operational costs, and helps avoid any
potential threat of premature system failure.
Each Access Cabinet features a tubular frame top and bottom connected centrally on each side, with
structural vertical members providing a center frame configuration. This design allows unhindered
180 degree clearance around the front and rear mounting angles, while offering clear access to the
internal cabinet envelope.
The design is crucial in allowing installation and maintenance to be carried out in a far more efficient
manner, which ultimately provides the tool to reduce the total cost of ownership during the lifetime of
the cabinet. With a wide range of cabinets available, the customer now has the ability to construct a
diverse range of internal configurations which allows both existing and next generation network
components to be housed, irrespective of their mounting requirements.
Cooper B-Line’s Access Cabinet System, the original corner-less cabinet, has been developed and
enhanced with the goal of providing the ultimate communication and data cabinet solution. Designed
from the frame up, the Access Cabinet System has evolved with application excellence and user
friendliness in mind. The Access Cabinet platform truly provides a modular cabinet solution designed to
grow with evolving system demands.
Fully configurable top panel options
Fully adjustable 19-inch rails
31.5” (800mm) wide cabinet offer
23-inch mounting options
Square hole or #12-24 tapped
hole mounting rail options
Simple ganging facility
through vertical center
members top and bottom
Extensive range of single and
double door options with a
variety of locking choices
Doors can be configured left
hand (LH) or right hand (RH)
hinged in the factory or in the
field
2-point locking door with key,
mechanical combination and
electronic locking options
Split hinged side panels for
easy handling. Available in plain
or vented steel on selected
cabinet sizes.
Quick release hinging on doors
& side panels
Open base with
infill panel options
Wide range of base mounting
options including leveling feet
and castors
Table of Contents
Flexibility By Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Access Design Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Network Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 7
Active Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 9
Advanced Management Distribution Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11
Co-Locate / Multi-Housing Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13
3 into 2 Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 - 15
High Density Copper Cabling Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 - 17
High Density Fibre Cabling Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 - 19
Aisle Containment (Features, Benefits, Specifications) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21
Aisle Containment (Accessories) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 - 23
Dynamic Part Numbering Configurator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - 25
Step 1 - Frame Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 - 28
Step 2 - Door Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 - 30
Step 3 - Side Panel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Step 4 - Top Panel Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Step 5 - Color Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Step 6 - Packaging Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Configurating A Cabinet For Thermal Loads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Thermal Configuration Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 - 37
Component Assembly Specs & Part Numbers
Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 - 39
Mounting Angle Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 41
Base Mounting & Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 - 44
Blanking Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Top Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 - 47
Side Panel Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Trim & Door Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 - 55
Shelf Options & Compatibility Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 - 65
Vertical Cable Management Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 - 71
Horizontal Cable Management Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 - 74
Access Cabinet Components
Cable Ties, Blanking Panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 - 77
Vertical Baffles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 79
Fan Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 - 81
Earth Kits & Earth Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 - 84
‘U’ Height Labels & Bolt Through Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
i-PAL, i-BOX, & i-PDU System Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 - 97
Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 - 101
Access Configurator Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
1
Flexibility By Design
Modular solutions designed to grow with demand
Active Cabinet
Network Cabinet
pages 8 & 9
pages 6 & 7
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
High Density Fiber
Cabling Cabinet
pages 18 & 19
2
Flexibility By Design
AMDF Cabinet
pages 10 & 11
Co-Locate Cabinet
pages 12 & 13
Aisle Containment
pages 20 - 23
High Density Copper
Cabling Cabinet
pages 16 & 17
3
3 into 2 Cabinet
pages 14 & 15
Introduction
The cabinet has, in the past, been considered to be “just a metal box”, providing the mounting structure into which the interesting,
expensive equipment was mounted. Nowadays, however, the cabinet is performing an increasingly important role, not only having to
house a number of different technologies but also providing a framework to allow individual installations to be tailored to best match
the constraints and demands encountered.
The form and function of the cabinet structure can complement the operational efficiency of an installation given some consideration
and forethought. Equally, failure to understand and address potential issues, can lead to increased operational costs as well as the
threat or premature system failure.
Cooper B-Line’s Access Cabinet System, the original corner-less cabinet, has been developed and enhanced with the goal of providing
the ultimate cabinet solution. Designed from the frame up, the Access Cabinet System has evolved with application excellence and
ease of use in mind.
Each Access Cabinet solution is based on the same cantilever frame concept using a tubular frame top and bottom connected by
central extrusions. This design allows unhindered 180 degree clearance around the front and rear mounting angles while at the same
time offering clear access to the internet cabinet envelope.
This crucially allows installation and maintenance to be carried out in a far more efficient manner and ultimately provides the tool to
reduce the total cost of ownership during the lifetime of the cabinet. The wide range of cabinet sizes offered provides the ability to
construct a diverse range of internal configurations, allowing both existing and next generation network components to be housed,
irrespective of their mounting requirements.
• Unique
So what makes Access so different from conventional cabinets? The unique construction, open architecture without corner posts,
enables the quick removal of all panels/doors to completely expose the open frame for installation of cables and/or equipment. Far
neater, faster and user friendly cable installations are possible compared with conventional cabinets. The resultant installation is much
easier to maintain with ready access to equipment and the avoidance of messy, un-workable cabling arrangements.
• Effective
The Access cabinet open frame structure provides virtually 360° total accessibility, prior to fitting panels and doors, which gives
installers maximum working access and the opportunity to greatly improve installation times. The elimination of corner posts also
removes the need to excessively inset 19-inch mounting angles, achieving maximum equipment and working space.
• Flexible
The number of cabinet combinations available further enhances the strength of the Access design from door options to top panels.
Access achieves an unparalleled level of flexibility, providing the end user with the right cabinet for the right application.
• Technology
IT systems continue to be at the cutting edge as businesses search to develop a competitive advantage. The streaming of business
processes leading to improved efficiencies, together with the desire for real-time business reporting, are two aspects that are at the
forefront of current demands.
Couple the increasing demands from business with the adoption of data-rich applications by the masses, and the demand for increased
IT capacity seems set to continue for the foreseeable future.
• Applications
Users continue to crave improvements in computing capacity, driving chip manufacturers to develop quicker processors, with new
models launched every two or three years. Typically these developments have seen processors halving in size, effectively doubling the
computing capacity for a given envelope size. Developments, however, are not limited to the action components. Cabling infrastructure
solutions have also developed, and, just like the active components new challenges are generated when these are deployed.
• Space
Businesses need to maximize any return on investment. Consequently, space utilization, or the need to work within a space constraint,
can impact significantly on a system’s design and capability. In a number of geographical regions these factors look to continue to gain
in importance, with the growing cost and limited availability of suitable real estate.
• Power
Power costs and supply demands seem set to continue to increase year upon year. The improvements to computing densities,
coupled with the demand for system resilience, have led to a demand for higher power supply densities as equipment manufacturers
build in power supply redundancy. The improvements in computing density also generate the need to manage and dissipate increasing
thermal loads produced by the equipment.
• Resilience
Any system or process is only as strong as its weakest link. The development of any system is measured in terms of return on
investment, which is indelibly linked to system availability. System expectations nowadays are for 99.9% + availability. Clearly, in
order to achieve such levels of service, it is imperative that redundancy or back up processes are accommodated in the design.
4
Access Design Features
1
Open frame structure providing optimal
access configurability
• Bolt together construction
• 2.200 lbs. (1,000kg) load rating
• NEMA / IP20 environmental rating
• Available assembled or flat packed*
• Quick to assemble and easy to adjust
* Flat packed subject to additional charge
5
Extensive range of cabinet size options**
• Standard heights ranging from 22U to 47U
• Width including 23.6” (600mm)
27.6” (700mm)
31.5” (800mm)
• Depths from 26.5” (675mm) to 55.1” (1400mm)
6
Mounting technologies including
• Option of either #12-24 pre-tapped or square
pierced rails
• Configured 19-inch***
• Full width rails***
• ETSI rails
• Configured with RCM management fingers
*** Only available on 31.5” (800mm) wide cabinets
Configurable top panel options
• Range of plain, vented, cable entry,
fan tray and cable channel options
• Configurable into any order
** Please contact customer services for
availability of stocked sizes and lead time
confirmation
2
Door Features
• Quick release hinges
• Configurable left or right hinged
• Secure locking options
• Single and double door options
• Earth bonding options
6
2
Cabinet security options
• Two point espan locking as standard
with keyed alike locks
• Individually keyed locking (option)
• Mechanical combination locking (option)
• Stand alone intelligent electronic
locking (option)
• Network configurable intelligent
electronic locking (option)
3
4
5
Side Panel Features
• Standard split half depth construction
• Easier handling
• Quick release hinges
• Secure (internal access required to open)
• Earth bonding facility
3
4
2
Range of base blanking and cabinet
mounting options
5
3
1
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
Standard Color options
• Default finish is black with black trim.
• Hardware and mouldings are available in Black or Blue as standard
• Panels available in Black or Light Gray as standard with other panel
color options available on request subject to MOQs and lead times
5
Network Cabinet
Introduction
Most day to day networking installations incorporating low density active
equipment or cabling applications, can be accommodated into what has
evolved to be the industry standard networking cabinet.
Details of the standard Access Network Enclosure are shown below. In the
event of this standard specification not meeting the needs of a specific
application then, thanks to Access’s modular design, each cabinet can be
configured using the simple dynamic part number shown on page 25.
Further details on custom cabinet specification can also be found on
pages 26 to 55.
Standard Access Network Enclosure
Each cabinet comprises of the following:
• Access Cabinet base frame mounted on Nylon feet
• Supplied with two pairs of fully adjustable, 19-inch mounting angles
• Glass door with vented styles fitted at the front
• Plain steel door fitted at the rear
• Plain Side Panels fitted both sides
• Top panel configuration comprising of:
- One vented panel fitted at the rear
- Remaining top panel opening fitted with plain panels
• Standard Finish: Black with Black Trim - RAL 9005
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
23.6 inch (600mm) Wide Cabinet
Part Number
Part Number
(Assembled)
(Flat Packed)
A2266C1CGSPPNVB
A2269C1CGSPPXVB
A2261C1CGSPPPVB
A2766C1CGSPPNVB
A2769C1CGSPPXVB
A2761C1CGSPPPVB
A3966C1CGSPPNVB
A3969C1CGSPPXVB
A3961C1CGSPPPVB
A4266C1CGSPPNVB
A4269C1CGSPPXVB
A4261C1CGSPPPVB
A4766C1CGSPPNVB
A4769C1CGSPPXVB
A4761C1CGSPPPVB
A2266C1CGSPPNVBK
A2269C1CGSPPXVBK
A2261C1CGSPPPVBK
A2766C1CGSPPNVBK
A2769C1CGSPPXVBK
A2761C1CGSPPPVBK
A3966C1CGSPPNVBK
A3969C1CGSPPXVBK
A3961C1CGSPPPVBK
A4266C1CGSPPNVBK
A4269C1CGSPPXVBK
A4261C1CGSPPPVBK
A4766C1CGSPPNVBK
A4769C1CGSPPXVBK
A4761C1CGSPPPVBK
Effective
U
in.
(mm)
in.
(mm)
22
43.7”
(1111)
23.6
(600)
27
39
42
47
6
Height
52.5” (1333)
73.5” (1867)
78.7” (2000)
87.5” (2222)
Width
23.6
23.6
23.6
23.6
(600)
(600)
(600)
(600)
Depth
in.
(mm)
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
Network Cabinet
Option Overview
Accessories
• Five standard heights with other heights available
(subject to order) up to a maximum of 52U
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
• Two standard widths of 23.6” (600mm) and
31.5” (800mm) Other options including
27.6” (700mm) wide assemblies are available subject
to order
•
•
•
•
•
•
•
•
•
•
•
•
•
• Three standard depth options including
26.6” (675mm), 36.0” (915mm) and 39.4” (1000mm)
Other depth options available to order up to
a maximum of 55.1” (1400mm)
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a
range of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
Cabinet Cladding Enhancements . . . . . Pages 46-55
Cabinet Floor Mounting Options . . . . . . Pages 42-43
Base Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 44-45
Roof Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Rack Mounted Thermal Management Pages 80-81
In Cabinet Air Management . . . . . . . . . . . . Pages 75-79
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Bolt Together/Ganging Options . . . . . . . . . . . . . . Page 85
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
31.5” (800mm) Wide Cabinet
Part Number
Part Number
(Assembled)
(Flat Packed)
A2286C1CGSPPNVB
A2289C1CGSPPXVB
A2281C1CGSPPPVB
A2786C1CGSPPNVB
A2789C1CGSPPXVB
A2781C1CGSPPPVB
A3986C1CGSPPNVB
A3989C1CGSPPXVB
A3981C1CGSPPPVB
A4286C1CGSPPNVB
A4289C1CGSPPXVB
A4281C1CGSPPPVB
A4786C1CGSPPNVB
A4789C1CGSPPXVB
A4781C1CGSPPPVB
A2286C1CGSPPNVBK
A2289C1CGSPPXVBK
A2281C1CGSPPPVBK
A2786C1CGSPPNVBK
A2789C1CGSPPXVBK
A2781C1CGSPPPVBK
A3986C1CGSPPNVBK
A3989C1CGSPPXVBK
A3981C1CGSPPPVBK
A4286C1CGSPPNVBK
A4289C1CGSPPXVBK
A4281C1CGSPPPVBK
A4786C1CGSPPNVBK
A4789C1CGSPPXVBK
A4781C1CGSPPPVBK
Effective
U
in.
(mm)
in.
(mm)
22
43.7”
(1111)
31.5
(800)
27
39
42
47
7
Height
52.5” (1333)
73.5” (1867)
78.7” (2000)
87.5” (2222)
Width
31.5
31.5
31.5
31.5
(800)
(800)
(800)
(800)
Depth
in.
(mm)
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
Active Cabinet
Introduction
Just about any network component that consumes electricity needs to
be managed thermally to operate efficiently. Managing these active
components within a secure cabinet environment can be challenging, given
that different components are designed to be cooled in different ways and
can vary significantly in size and weight. Probably the only commonality
between them is that usually, but not always, they have been designed to
be 19” (482mm) mounted.
To help simplify the configuration process, Cooper B-Line has developed a
range of modular tools to cope with widely differing demands. The core of
the solution is a standard Access Active Cabinet configuration, which, like
every other Access cabinet, can be easily reconfigured to provide an
optimized solution (see the dynamic part number matrix on page 25).
Basic Active Equipment Enclosure
• Access Cabinet base frame mounted on Nylon feet
• Supplied with two pairs of fully adjustable 19-inch mounting angles
• Vented steel front door (80% free area ventilation pattern)
• Plain side panels fitted both sides
• Top panel configuration comprising of;
- One vented panel fitted at rear
- The remaining top panel opening fitted with plain infill panels
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
• Standard Finish: Black with Black Trim - RAL 9005
A full range of modular thermal enhancements are available to optimize the deployment of installations housing both
conventional server applications as well as mixed technology configurations. For further details of the range of modular
thermal enhancements please refer to pages 75 to 81.
8
Active Cabinet
Option Overview
Accessories
• Three standard heights including 27U, 42U, & 47U
Other heights available subject to order up to a
maximum of 52U
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
• Two standard widths of 23.6” (600mm) and
31.5” (800mm). Other options including
27.6” (700mm) wide assemblies are available
subject to order
•
•
•
•
•
•
•
•
•
•
•
•
•
• Three standard depth options including
36.0” (915mm), 39.4” (1000mm) and 47.2” (1200mm)
with other depth options available to order up to
a maximum of 55.1” (1400mm)
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a
range of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
Cabinet Cladding Enhancements . . . . . Pages 46-55
Cabinet Floor Mounting Options . . . . . . Pages 42-43
Base Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 44-45
Roof Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Rack Mounted Thermal Management Pages 80-81
In Cabinet Air Management . . . . . . . . . . . . Pages 75-79
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Bolt Together/Ganging Options . . . . . . . . . . . . . . Page 85
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
Part Number
Part Number
(Assembled)
(Flat Packed)
A2769C1CVVPPXVB
A2761C1CVVPPPVB
A2762C1CVVPPPVB
A4269C1CVVPPXVB
A4261C1CVVPPPVB
A4262C1CVVPPPVB
A4769C1CVVPPXVB
A4761C1CVVPPPVB
A4762C1CVVPPPVB
A2789C1CVVPPXVB
A2781C1CVVPPPVB
A2782C1CVVPPPVB
A4289C1CVVPPXVB
A4281C1CVVPPPVB
A4282C1CVVPPPVB
A4789C1CVVPPXVB
A4781C1CVVPPPVB
A4782C1CVVPPPVB
A2769C1CVVPPXVBK
A2761C1CVVPPPVBK
A2762C1CVVPPPVBK
A4269C1CVVPPXVBK
A4261C1CVVPPPVBK
A4262C1CVVPPPVBK
A4769C1CVVPPXVBK
A4761C1CVVPPPVBK
A4762C1CVVPPPVBK
A2789C1CVVPPXVBK
A2781C1CVVPPPVBK
A2782C1CVVPPPVBK
A4289C1CVVPPXVBK
A4281C1CVVPPPVBK
A4282C1CVVPPPVBK
A4789C1CVVPPXVBK
A4781C1CVVPPPVBK
A4782C1CVVPPPVBK
Effective
U
27
42
47
27
42
47
9
Height
in.
(mm)
52.5” (1333)
78.7” (2000)
87.5” (2222)
52.5” (1333)
78.7” (2000)
87.5” (2222)
Width
in.
(mm)
23.6
(600)
23.6
23.6
31.5
31.5
31.5
(600)
(600)
(800)
(800)
(800)
Depth
in.
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
(mm)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
Advanced Managed Distribution Frame
Introduction
The Access AMDF frame provides the perfect platform for high density
copper and fiber patching applications. Providing unrivaled accessibility, the
basic frame structure can be easily and quickly adjusted as required.
The front and rear mounting angles on the 36.0” (915mm) and 39.4” (1000mm)
deep variants can be removed allowing 110 Style Connector Mounting
Frames to be easily fitted.
Advanced Managed Distribution Frame
Each unit is configured as follows;
• Basic Access frame with openings at the top and bottom for maximum
unhindered cabling access
• Fitted with standard corner adaptors and adjustable jacking feet
• Supplied with two pairs of fully adjustable, 19-inch mounting angles
• Each mounting angle fitted with ten off twist and lock cable
management arms
• Standard Finish: Black with Black Trim - RAL 9005
The AMDF range is fully compatible with the Access range of accessories.
The frames can also be retro fitted with doors and side panels for added
security or to maintain an aesthetically pleasing appearance.
A wide range of cabling accessories are available to enhance
the Access AMDF product. An overview of just some of these
accessories is shown below.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
Access Cable Tray
– For further details
please see page 66
Front / Rear
Mounted Cable
Basket – For further
details please see
page 67
Access Cable
Basket – For further
details please see
page 66
Front / Rear
Mounted Velcro
Cable Tray
– For further details
please see page 67
Access Twist &
Lock Arms – For
further details
please see page 74
Access Computer
Floor Plinth – For
further details
please see page 43
10
Advanced Managed Distribution Frame
Option Overview
Accessories
• Two standard heights - 42U & 47U with other sizes
available subject to order up to a maximum 52U
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
• Available in 31.5” (800mm) wide configuration
• Three standard depth options including
26.6” (675mm), 36.0” (915mm) and 39.4” (1000mm)
with other depth options available to order up to
a maximum 55.1” (1400mm)
•
•
•
•
•
•
•
•
•
•
•
•
•
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a
range of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
Part Number
Part Number
(Assembled)
(Flat Packed)
A4286AMDFB
A4289AMDFB
A4281AMDFB
A4786AMDFB
A4789AMDFB
A4781AMDFB
A4286AMDFBK
A4289AMDFBK
A4281AMDFBK
A4786AMDFBK
A4789AMDFBK
A4781AMDFBK
Effective
U
42
47
11
Cabinet Cladding Enhancements . . . . . Pages 46-55
Cabinet Floor Mounting Options . . . . . . Pages 42-43
Base Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 44-45
Roof Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Rack Mounted Thermal Management Pages 80-81
In Cabinet Air Management . . . . . . . . . . . . Pages 75-79
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Bolt Together/Ganging Options . . . . . . . . . . . . . . Page 85
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
Height
in.
(mm)
78.7” (2000)
87.5” (2222)
Width
in.
(mm)
31.5
(800)
31.5
(800)
Depth
in.
(mm)
26.6
36.0
39.4
26.6
36.0
39.4
(675)
(915)
(1000)
(675)
(915)
(1000)
Co-Locate/Multi-Hosting Cabinet
Introduction
The Access Co-Locate / Multi Hosting cabinet range provides the perfect
space saving solution, allowing either two or three conventional rack
spaces to be housed within a single cabinet foot print.
With individually keyed bays, the Access Co-Locate cabinet offers the
additional benefit of allowing tiered access control. By controlling the
issue of keys, administrators can limit users to either individuals or
groups of bays. This functionality can be further enhanced with Cooper
B-Line’s i-PAL programmable electronic locking solution.
Multi Hosting / Co-Locate Access Cabinet
Each unit is configured as follows;
• Basic Access frame fitted with Nylon skids
• Divider bar assembly (single divider bar on 2-bay variants and twin
divider bars on 3-bay variants)
• Vented divider panel fitted to the divider bar assemblies
• Supplied with 2 x pairs of independent fully adjustable, 19-inch
mounting angles in each bay
• Fitted with 80% vented steel doors front and rear with each pair of
doors being individually keyed
• Top panel configured as follows:
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
- Fully vented panel fitted at the rear
- Remaining top panel aperture filled with plain panels
• Standard Finish: Black with Black Trim - RAL 9005
Cladding Options Include
• Plain Steel Doors
• Split Side Panels
• Fully configurable top panel assembly (using standard Access top panels)
• Configurable mechanical key, mechanical combination, or electronic locking options
Part Number
Part Number
(Assembled)
(Flat Packed)
A4268COLOC2B
A4261COLOC2B
A4262COLOC2B
A4288COLOC2B
A4281COLOC2B
A4282COLOC2B
A4288COLOC3B
A4281COLOC3B
A4282COLOC3B
A4268COLOC2BK
A4261COLOC2BK
A4262COLOC2BK
A4288COLOC2BK
A4281COLOC2BK
A4282COLOC2BK
A4288COLOC3BK
A4281COLOC3BK
A4282COLOC3BK
Bays
2
2
3
Effective
U
42
42
42
12
Height
in.
(mm)
78.7” (2000)
78.7” (2000)
78.7” (2000)
Width
in.
(mm)
23.6
(600)
31.5
31.5
(800)
(800)
Depth
in.
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
(mm)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
Co-Locate/Multi-Hosting Cabinet
Option Overview
Accessories
• Available in both 42U and 47U standard heights
with other heights available to order up to a
maximum of 52U
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
• Available in 23.6” (600mm) and
31.5” (800mm) wide configurations
•
•
•
•
•
•
•
•
•
•
•
•
•
• Three standard depth options including
36.0” (915mm), 39.4” (1000mm) and
47.2” (1200mm) with other depth options
available to order up to a maximum of
55.1” (1400mm) deep.
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a
range of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
Cabinet Cladding Enhancements . . . . . Pages 46-55
Cabinet Floor Mounting Options . . . . . . Pages 42-43
Base Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 44-45
Roof Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Rack Mounted Thermal Management Pages 80-81
In Cabinet Air Management . . . . . . . . . . . . Pages 75-79
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Bolt Together/Ganging Options . . . . . . . . . . . . . . Page 85
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
Internal Options Include
• Plain Divider Panels
• Vertical Cable Trays (independently mounted in each bay)
• Vertical Cable Basket (independently mounted in each bay)
• Secure Cabling Channels in 31.5” (800mm wide
cabinets only)
Part Number
Part Number
(Assembled)
(Flat Packed)
A4769COLOC2B
A4761COLOC2B
A4762COLOC2B
A4789COLOC2B
A4781COLOC2B
A4782COLOC2B
A4789COLOC3B
A4781COLOC3B
A4782COLOC3B
A4769COLOC2BK
A4761COLOC2BK
A4762COLOC2BK
A4789COLOC2BK
A4781COLOC2BK
A4782COLOC2BK
A4789COLOC3BK
A4781COLOC3BK
A4782COLOC3BK
Bays
Effective
U
2
47
2
47
3
47
13
Height
in.
(mm)
87.5” (2222)
87.5” (2222)
87.5” (2222)
Width
in.
(mm)
23.6
(600)
31.5
31.5
(800)
(800)
Depth
in.
36.0
39.4
47.2
36.0
39.4
47.2
36.0
39.4
47.2
(mm)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
(915)
(1000)
(1200)
3 into 2 Cabinet
Introduction
Each assembly comprises of two 31.5” (800mm) wide specially
configured Access cabinets bayed together. The unique
corner-less frame construction allows up to 3 sets of 19-inch
mounting rails to be fitted within the footprint of two conventional
31.5” (800mm) wide cabinets. This arrangement allows up to 50%
more equipment to be installed within the foot print normally taken
by two conventional cabinets.
The assembly can be supplied with three sets of full depth 19-inch
rails front and rear. For applications requiring vertical cable
management to accommodate higher volumes of cabling, users
may choose to have the assembly configured with three sets of
19-inch rails at the front and two sets of 19-inch rails at the rear.
Access 3 into 2 Cabinet
Each unit is configured as follows;
• Two specially configured Access 31.5” (800mm) wide frames
each fitted with Nylon skids. Each frame has the center vertical
extrusions removed to facilitate full depth mounting in the center
bay position
• Three sets of fully adjustable, 19-inch mounting rails fitted at the
front of the assembly
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
• The choice of either two sets or three sets of fully adjustable,
19-inch mounting angles fitted at the rear of the assembly
• Standard Finish: Black with Black Trim - RAL 9005
Assembly cladding can be ordered separately as required.
Examples of typical cladding arrangements are shown below.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
14
3 into 2 Cabinet
Option Overview
Accessories
• Available in both 42U and 47U standard heights
with other heights available to order up to a
maximum of 52U
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
• Available in 23.6” (600mm) and
31.5” (800mm) wide configurations
•
•
•
•
•
•
•
•
•
•
•
•
•
• Three standard depth options including
36.0” (915mm), 39.4” (1000mm) and 47.2” (1200mm)
with other depth options available to order up to a
maximum of 55.1” (1400mm) deep.
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a
range of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
Cabinet Cladding Enhancements . . . . . Pages 46-55
Cabinet Floor Mounting Options . . . . . . Pages 42-43
Base Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 44-45
Roof Cable Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 46
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Rack Mounted Thermal Management Pages 80-81
In Cabinet Air Management . . . . . . . . . . . . Pages 75-79
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Bolt Together/Ganging Options . . . . . . . . . . . . . . Page 85
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
Part Number
Part Number
(Assembled)
(Flat Packed)
A4286DB
A4289DB
A4281DB
A4286EB
A4289EB
A4281EB
A4786DB
A4789DB
A4781DB
A4786EB
A4789EB
A4781EB
A4286DBK
A4289DBK
A4281DBK
A4286EBK
A4289EBK
A4281EBK
A4786DBK
A4789DBK
A4781DBK
A4786EBK
A4789EBK
A4781EBK
Sets of Rails
Front
Back
3
3
3
3
Effective
U
2
42
3
42
2
47
3
47
15
Height
in.
(mm)
78.7” (2000)
78.7” (2000)
87.5” (2222)
87.5” (2222)
Width
in.
(mm)
63.0
(1600)
63.0
63.0
63.0
(1600)
(1600)
(1600)
Depth
in.
(mm)
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
26.6
36.0
39.4
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
High Density Copper Cabling Cabinet
Introduction
The Access High Density Cabling Cabinet is the first cabinet designed to
solve the problems of today’s networking environment. It provides unique
working and cabling accessibility to totally transform cabinet installation
layouts, on-side installation time and on-going systems management.
The unique open architecture construction of the corner-less design, coupled
with the ability to quickly remove all of the external cladding, provides the
ability to create an installation that is far neater and more user friendly.
Compared with conventional cabinets, systems can be deployed far more
quickly without compromising the quality of the installation.
The cabinet promotes the maintenance of bend radii including requirements
for Category 6A cabling further helping to avoid messy, un-workable cabling
arrangements.
The Access HDC cabinet’s open frame structure provides virtually 360o total
accessibility, prior to fitting panels and doors, which gives installers maximum
working access and the opportunity to greatly improve installation times. The
elimination of corner posts also removes the need to excessively inset 19”
mounting angles, achieving maximum working space.
The unique design of the enclosure, which is 35.4” (900mm) wide and
19.7” (500mm) deep, allows extra space for cable management each side of
the 19-inch mounting angles. The 19-inch mounting angles are designed with
finger cable management every 1U on both sides allowing for complete
support of patch cords so that no “U” space is wasted with cable
management bars.
Light Gray & Blue Cabinets
Shown For Clarity Only
Standard Default Finish
Is Black With Black Trim
Access High Density Copper Cabling Cabinet
Each unit is configured as follows;
• Basic frame fitted with nylon feet
• One pair of fully adjustable, 19-inch rails fitted with RCM+ fingers
• Twenty twist and lock cable management arms (10 per 19-inch rail)
• Single piece plain top panel
• Two pairs of plain side panels
• Single piece plain steel rear door
• Double plain steel front door
Access HDCC Cabinet
Description
Packaging
Part Number
Access High Density Copper Cabling Cabinet 42U High x 35.4” (900mm) Wide x 19.7” (500mm) Deep
as per standard specification
Pallet/Flat Pack**
HD420905C8CYSP1NNB
Access High Density Copper Cabling Cabinet 47U High x 35.4” (900mm) Wide x 19.7” (500mm) Deep
as per standard specification
Pallet/Flat Pack**
HD470905C8CYSP1NNB
Packaging
Part Number
Access High Density 3U Cable Trough Assembly -
Fitted / Special
HD3UCTB
Access High Density 3U Cable Trough Extender Allows troughs to be coupled up when cabinets
are bayed/ganged back-to-back.
Fitted / Special
HD3UCTEB
** Flat packed subject to additional charge
Access HDCC Cable Through Trough
Description
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
16
High Density Copper Cabling Cabinet
Option Overview
Accessories
• Available in 42U and 47U standard height options
• Optional cable through troughs
• Access High Density Cabling Cabinet 2-Bay Computer
Floor Plinth to suit 34.5” (900mm) wide x 19.7” (500mm)
HDCC assemblies bayed back-to-back
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a range
of standard quick delivery color options
as follows;
• Black with Black Trim – Color Ref. B (default)
• Light Gray with Blue Trim – Color Ref. A
A comprehensive range of accessories are
available to suit every application. Details of
specific items can be found on the pages
indicated below;
•
•
•
•
•
•
Vertical Cable Management . . . . . . . Pages 40, 66-71
Horizontal Cable Management . . . . . . . . Pages 72-75
Fixed & Sliding Shelf Options . . . . . . . . . . Pages 56-65
Earthing Accessories . . . . . . . . . . . . . . . . . . . . . Pages 82-84
Access Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pages 86-87
Environmental Monitoring . . . . . . . . . . . . . . . Pages 88-97
Other standard or custom color options are also
available subject to minimum order quantities and
lead times
• Light Gray with Black Trim – Color Ref. C
• Black with Blue Trim – Color Ref. D
• Light Gray with Mid Gray Trim – Color Ref. G
Access HDCC Bolt Together Kit
Description
Packaging
Part Number
Bagged
HDBKB
Packaging
Part Number
Access High Density Cabling Cabinet 42U x 19.7” (500mm) Deep Double Side Panels
(fills in the center side panel aperture when baying/ganging
two HDCC cabinets back-to-back)
Special
HDPDSP425B
Access High Density Cabling Cabinet 47U x 19.7” (500mm) Deep Double Side Panels
(fills in the center side panel aperture when baying/ganging
two HDCC cabinets back-to-back)
Special
HDPDSP475B
Access High Density Cabinet Baying Kit
Access HDCC Baying Side Panels
Description
Access HDCC Cabinet Computer Floor Plinth
Description
Access High Density Cabling Cabinet 2-Bay Computer Floor Plinth to suit
35.4” (900mm) wide x 19.7” (500mm) deep.
AHDCC assemblies (back-to-back baying/ganging)
Packaging
Part Number
Special
HD2BFP95B
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
17
High Density Fiber Cabling Cabinet
Features
The Access High Density Fiber Cabling Cabinet has been further developed to meet
the exacting needs demanded by high density fiber cabling installations. Capitalizing
on the strength and modularity of the Access Cabinet design, the internal cabinet
envelope can be configured to provide a range of mounting configurations including
standard 19-inch.
Sharing the same key attributes of a conventional Access cabinet, the corner less
open architecture frame allows for secure but easy removal of all external cladding
in a matter of seconds. This feature provides the platform to allow cables to be
installed far more quickly without compromising the integrity of the cables or
connectors. The resultant installation allows safe bend radii to be maintained while
at the same time avoiding messy, haphazard cabling arrangements.
The unique design of the enclosure, which is 35.4” (900mm) wide and
19.7” (500mm) deep, together with the ability to offset the mounting angles,
enables the provision for cable management to be incorporated easily.
A range of standard options including cable management spools, cable supports,
cable troughs and cable ties are available to enhance the design.
•
•
•
•
•
•
Light Gray & Blue Cabinets
Shown For Clarity Only
Standard Default Finish
Is Black With Black Trim
Specifically designed for high density fiber cabling installations
Full 360° cabling access thanks to the quick release cladding
Integrated cable management (RCM+ fingers, cable spools etc.)
Optional cable through troughs
Unhindered cable top or bottom cable entry
unrivaled cabling access with easy access for front to rear cabling down the sides of the cabinet
Cabinet Specifications
Benefits
Each unit is configured as follows;
• Basic frame fitted with nylon feet
• One pair of full adjustable, 19-inch rails fitted with RCM+
fingers on right hand mounting angle only
• Vertical cable manager fitted with 8 off cable spools
• Single piece plain top panel
• Two pairs of plain side panels
• Single piece plain steel rear door
• Double plain steel front door
• Designed to be compliant with conventional fiber
cabling requirements
• Totally open construction for ease of cross-patching
• Reduced installation time
• Cabling installations made easy
• Maximum useable space
• unrivaled working access
• Excellent cabling accessories
• Flexible panel configurations
Specifications
• 42U and 47U standard height options
• Available in 35.4 inch (900mm) width by 19.7 inch (500mm)
deep as standard
• Available fully assembled and palletized as standard
with flat pack available upon request
• Weight load capacity 2,200 lbs. (1000kg)
• Protection Rating - NEMA1 (IP20)
Access HDCC Fiber Cabling Cabinet
Finish Options (see page 33)
Cooper B-Line’s Access cabinet is available in a range
of standard quick delivery color options as follows;
• Black with Black Trim - Color Ref. B (Default)
Other standard or custom color options are also available
subject to minimum order quantities and lead times
including;
• Light Gray with Blue Trim - Color Ref. A
Description
Packaging
Part Number
Access High Density Cabling Cabinet 42U High x 35.4” (900mm) Wide x 19.7” (500mm) Deep
as per standard specification
Pallet/Flat Pack**
HF420905C8CYSP1NNB
Access High Density Cabling Cabinet 47U High x 35.4” (900mm) Wide x 19.7” (500mm) Deep
as per standard specification
** Flat packed subject to additional charge
Pallet/Flat Pack**
HF470905C8CYSP1NNB
18
High Density Fiber Cabling Cabinet
Access HDCC Fiber Cable Storage Drawers
Description
Access High Density 19-inch 2U Sliding Storage drawer unit
Access High Density 19-inch 3U Sliding Storage drawer unit
Packaging
Part Number
Fitted / Special
Fitted / Special
HF19DU2UB
HF19DU3UB
Drawer Unit
Access HDCC Horizontal Cable Managers
Description
Packaging
Part Number
Individually Boxed
Individually Boxed
Individually Boxed
SB87019S1FB
SB87019S2FB
SB87019S3FB
Packaging
Part Number
Fitted / Special
Bagged Pack Of 100
Bagged Pack Of 100
Supplied as single pieces
Supplied as single pieces
Supplied as single pieces
Supplied as single pieces
Supplied as single pieces
Supplied as single pieces
SB8607SPFB
SB862PIF
SB862CSM
SB72558x5
SB7251x10
SB72658x4
SB7261x8
SB72758x6
SB72834x6
19-Inch 1U Horizontal Cable Management Panel With Hinged Cover
19-Inch 2U Horizontal Cable Management Panel With Hinged Cover
19-Inch 3U Horizontal Cable Management Panel With Hinged Cover
Horizontal Cable
Manager
Access HDCC Fiber Cabling Accessories
Description
Cable Spool Arms
Cable Strap Mount
Fixings
Cable Spool Arms
Cable Strap Mount Fixings
Cable Strap Mount
Cable Wrap (Yellow Nylon) 5/8” (16mm) x 5” (127mm)
Cable Wrap (Yellow Nylon) 1” (25mm) x 10” (254mm)
Cable Catch (Gray Nylon) 5/8” (16mm) x 4” (101mm)
Cable Catch (Gray Nylon) 1” (25mm) x 8” (203mm)
Cable Strap (Gray Nylon) 5/8” (16mm) x 6” (152mm)
Cable Hanger (Gray Nylon) 3/4” (19mm) x 6” (152mm)
Access HDCC Fiber Cabling Cabinet Bayed Side Panel
Description
Cable Strap Mount
Packaging
Part Number
42U High x 19.7” (500mm) Deep - Plain Double Side Panel
(fills in the center side panel opening
when baying/ganging two
HDCC cabinets back to back)
Special
HDPDSP425B
47U High x 19.7” (500mm) Deep - Plain Double Side Panel
(fills in the center side panel opening
when baying/ganging two
HDCC cabinets back to back)
Special
HDPDSP475B
Packaging
Part Number
Bagged
HDBKB
Access HDCC
Velcro Cable Tidies
Description
Access High Density Cabinet Baying Kit
Access HDCC Cabinet Computer Floor Plinth
Description
Packaging
Access High Density Cabling Cabinet 2-Bay Computer Floor Plinth
Special
To Suit 35.4” (900mm) wide x 19.7” (500mm) deep AHDCC Assemblies
(back to back baying)
2-Bay Computer
Floor Plinth
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
19
Part Number
HD2BFP95B
Aisle Containment
Features
Cooper B-Line’s i-ACS system continues the design philosophy of suppling modular solutions developed to
grow with demand. Designed to be fully compatible with the industry leading Access Cabinet range, the
i-ACS solution can be easily deployed into both new and existing sites.
The flexibility of the design also allows Cooper B-Line to supply solutions to fit third party racks and
enclosures from other equipment manufacturers.
•
•
•
•
Standard options to fit 42U & 47U Access Cabinets
Standard designs allow flexibility of aisle spacing
44” (1100mm) to 48” (1200mm) aisle spacing option
68” (1700mm) to 72” (1800mm) aisle spacing option
Fully or partially glazed roof panels allowing light penetration and
the integration of fire monitoring and suppression systems
Double sliding doors provide easy access
without compromising room layouts
Can be configured to provide cable management options
between bayed cabinets as well as above the aisle spacing
Choice of door locking options including
mechanical and electronic locking
No trip hazard at the door threshold
Option of fully or partially glazed doors allowing light
penetrations as well as unobscured view of the aisle space
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
Benefits
•
•
•
•
•
•
No need to order special cabinets as the system fits to standard Access cabinets
Fits both new and existing Access cabinet deployments
Wide range of engineered options
Supplied with full easy to follow assembly instructions
Modular design allows installations to be expanded or contracted easily
Significantly improves cooling efficiencies allowing reduced operational costs or the option of increasing
equipment densities
Specifications
Doors
• Aluminum framed mounted onto sliding guide rails
• Non locking, key locking, mechanical combination, and electronic locking options
• Clear perspex glazed panels for improved light penetration
Roof Panels
• Aluminum frame assembly on adjustable aisle spacing and sliding panel options
• Steel frame option for fixed aisle spacing options
• Clear perspex glazed panels for improved light penetration
20
Aisle Containment
Why Use Cold Aisle Containment?
In today’s environment where technology compaction is leading to higher computing densities, the need for
not only adequate but also efficient cooling systems continues to be of growing importance.
At one time businesses may have considered simply reducing the number of active equipment units
deployed in each rack space. With increasing energy, labor and real estate costs this is no longer an option,
other solutions need to be found.
What’s the right solution? There is no single solution that fits every application as each site will have different
constraints and demands. The one thing that each site will have in common is that, by avoiding hot and cold
crossover, the cooling infrastructure will run more efficiently, leading to lower operational costs and/or
improved equipment density capabilities.
In a conventional data room environment configured in a “hot aisle”/”cold aisle” layout, the Computer Room
Air Conditioning units (CRAC units) perform the function of collecting warm air (return air) from the local
ambient environment. This return air is then cooled by the CRAC unit before being circulated back into the
room environment. Where a raised computer floor is employed in the data room, it is quite usual for the cold
air feed from the CRAC unit to be fed under the floor void, in this scenario, vented floor tiles are deployed in
strategic locations, allowing cold air to be forced up into the “cold aisle”, allowing the active equipment to
draw the cold air across the electronics to cool them. The hot air is then expelled out from the rear of the
cabinet into the “hot aisle”.
While this provides a cooling mechanism, it is clear to see a number of drawbacks in the layout.
1. The cold air is free to mix with the local ambient air leading to a rise in temperature of the cold air,
which in turn reduces the cooling efficiency of the air.
2. The cold air cabinet bypass the active equipment completely, simply circulating back to the CRAC unit.
3. The hot air exhausted from the rear of the cabinet can easily be drawn back into the front of the cabinet,
potentially leading to the generation of hotspots.
Cold aisle containment effectively takes care of a number of these issues, as both the feed air and the return
air are segregated. As a consequence, the full cooling potential of the cold air is utilized, providing improved
cooling and operational efficiency.
Cold Aisle Containment
Various Glazed Roofing
Options
Conventional Hot Aisle/Cold Aisle
Overhead Cable
Management
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
21
Aisle Containment
Sliding Doors
Aisle Containment
Part Number
Description
Packaging
Cable Channel Top Panel Assembly
Access Aisle Containment System - 23.6” (600mm) Wide Standard
AACSCC06STB
Cable Channel with Brush Strip Entry
Access Aisle Containment System - 31.5” (800mm) Wide Standard
AACSCC08STB
Cable Channel with Brush Strip Entry
Access Aisle Containment System - 35.4” (900mm) Wide Standard
AACSCC09STB
Cable Channel with Brush Strip Entry
Supplied Individually
Wrapped
Supplied Individually
Wrapped
Supplied Individually
Wrapped
Fixed Glazed Roof Panel
AACSRP1203FPCLB
AACSRP1206FPCLB
AACSRP1208FPCLB
AACSRP1209FPCLB
AACSRP1803FPCLB
AACSRP1806FPCLB
AACSRP1808FPCLB
AACSRP1809FPCLB
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
Access Aisle Containment Fixed Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Fixed Adjustable Glazed Roof Panel
AACSRP1203AFCLB
AACSRP1206AFCLB
AACSRP1208AFCLB
AACSRP1209AFCLB
AACSRP1803AFCLB
AACSRP1806AFCLB
AACSRP1808AFCLB
AACSRP1809AFCLB
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
40” (1000mm) - 48” (1200mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
40” (1000mm) - 48” (1200mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
40” (1000mm) - 48” (1200mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
40” (1000mm) - 48” (1200mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
64” (1600mm) - 72” (1800mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
64” (1600mm) - 72” (1800mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
64” (1600mm) - 72” (1800mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
Access Aisle Containment Adjustable Acrylic Glazed Roof Panel - To suit
64” (1600mm) - 72” (1800mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
22
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Aisle Containment
Part Number
Description
Packaging
Sliding Glazed Roof Panel
AACSRP1203SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
AACSRP1206SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
AACSRP1208SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
AACSRP1209SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
48” (1200mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
AACSRP1803SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 11.8” (300mm) wide cabinet unit
AACSRP1806SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 23.6” (600mm) wide cabinet unit
AACSRP1808SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 31.5” (800mm) wide cabinet unit
AACSRP1809SPCLB Access Aisle Containment Sliding Acrylic Glazed Roof Panel - To suit
72” (1800mm) fixed aisle spacing and a 35.4” (900mm) wide cabinet unit
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Sliding Doors
AACSSD4212NLCLB
AACSSD4218NLCLB
AACSSD4712NLCLB
AACSSD4718NLCLB
Access Aisle Containment System Double Sliding Doors - To suit 42U height cabinets
set configured with a 48” (1200mm) wide aisle spacing - non locking assembly
Access Aisle Containment System Double Sliding Doors - To suit 42U height cabinets
set configured with a 72” (1800mm) wide aisle spacing - non locking assembly
Access Aisle Containment System Double Sliding Doors - To suit 47U height cabinets
set configured with a 48” (1200mm) wide aisle spacing - non locking assembly
Access Aisle Containment System Double Sliding Doors - To suit 47U height cabinets
set configured with a 72” (1800mm) wide aisle spacing - non locking assembly
Overhead Cable Basket Assembly
Access Aisle Containment Overhead Basket - 6” (150mm) - 48” (1200mm)
AACSCB1215
Wide Aisle Spacing Supplied Complete With Fittings
Access Aisle Containment Overhead Basket - 12” (300mm) - 48” (1200mm)
AACSCB1230
Wide Aisle Spacing Supplied Complete With Fittings
Access Aisle Containment Overhead Basket - 6” (150mm) - 72” (1800mm)
AACSCB1815
Wide Aisle Spacing Supplied Complete With Fittings
Access
Aisle Containment Overhead Basket - 12” (300mm) - 72” (1800mm)
AACSCB1830
Wide Aisle Spacing Supplied Complete With Fittings
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
23
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Flat
Packed
Supplied Individually
Wrapped
Supplied Individually
Wrapped
Supplied Individually
Wrapped
Supplied Individually
Wrapped
Dynamic Part Numbering Configurator
Assembling Your Custom Access Cabinet is as Easy as: 1, 2, 3, 4, 5, 6
The Access cabinet platform is designed to provide high quality enclosure solutions to the market at
competitive prices and short lead times. Ordering the Access cabinet can be done by ordering individual
components or by ordering a configured enclosure with a single part number.
Use the matrix on page 25 to build the part number for your desired Access cabinet configuration.
Step 1
Step 2
Step 3
Choose Frame
Configuration
Choose Front & Rear
Door Configuration
Choose Side Panel
Configuration
Steps 5
Step 4
Steps 6
No Character
Assembled & Palletized
Choose Top Panel
Configuration
Choose Color
Configuration
Choose Supply
Configuration
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
Note: Items shown with a yellow zinc finish are now furnished with a clear zinc finish.
24
K
Flat Packed
Dynamic Part Numbering Configurator
Assembling Your Custom Access Cabinet is as Easy as:
Step 1
Step 2
Step 3
Step 4
Frame
Doors
Sides
Tops
Step 5 Step 6
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Unit Width
Rail Position
6 = 23.6” (600mm)
7* = 27.6” (700mm)
8 = 31.5” (800mm)
L =Offset Left
C = Center
R = Offset Right
Access
Unit Sizes
Unit Depth
Rail Type
Stock Sizes - 22U,
27U, 39U, 42U, 47U
Non Stocked Sizes 12U, 17U, 32U, 45U, 52U
Custom Sizes Available
Upon Request
6 = 26.6” (675mm)
9 = 36.0” (915mm)
1 = 39.4” (1000mm)
2 = 47.2” (1200mm)
4* = 55.1” (1400mm)
1 = Sq. Hole 19-inch (x4)
2 = Sq. Hole 23-inch (x4)
3 = #12-24 Tap 19-inch (x4)
4 = #12-24 Tap 23-inch (x4)
5 = Sq. Hole Full Width (x4)
6 = Sq. Hole 19-inch (x2)
7 = Sq. Hole ETSI (x4)
8 = Sq. Hole 19-Inch with
RCM+ Fingers (x4)
Zone
1
Zone
2
Zone
3
Top Panel Options
B = Brush Strip
C = Brush Strip Infill
E = Vented Brush Strip
N = No Panel
P = Plain
V = Vented
X = Plain Infill
G = Grommet Knockouts
D = Enhanced Brush Strip Entry
2 = 2-Way Fan Tray (110v A/C)
3 = 3-Way Fan Tray (110v A/C)
4 = 2-Way Fan Tray (230v A/C)
5 = 2-Way Fan Tray + Controller
6 = 3-Way Fan Tray (230v A/C)
Color Scheme Options
A = Light Gray + Blue Trim
B = Black + Black Trim (standard finish)
C* = Light Gray + Black Trim
D* = Black + Blue Trim
G* = Light Gray + Mid Gray Trim
Frame Style Options
A = Universal Corner Plates & Jacking Feet
P = Standard Plinth & Jacking Feet
O = Standard Plinth & Castor
C = Frame On Nylon Skids
Q = Standard Plinth & Jacking Feet & Castors
G = Universal Corner Plates & Castors
L = Stabilizing Plinth & Jacking Feet
H = Universal Corner Plates & Jacking Feet & Castors
M = Stabilizing Plinth & Jacking Feet & Castors
Side Panel Options
P = Plain Both Sides
N = No Panels Both Sides
F* = Vented Right Side Only
V* = Vented Both Sides
E* = Vented Left Side Only
L = Plain Left Side Only
R = Plain Right Side Only
Front & Rear Door Options
A = Acrylic Glass Door – LH Hinged
B = Acrylic Glass Door – RH Hinged
C = Access Cover Trims
G = Glass Door (Vented Styles) – LH Hinged
H = Glass Door (Vented Styles) – RH Hinged
I = High Flow Server Door With Metal Trims – LH Hinged
J = High Flow Server Door With Metal Trims – RH Hinged
L = Wardrobe Style Double Glass Doors – LH Hinged
N = No Doors
O = Glass Door (Non Vented Styles) – LH Hinged
P = Glass Door (Non Vented Styles) – RH Hinged
Q = Pressurized Rear Door – LH Hinged
R = Pressurized Rear Door – RH Hinged
S = Plain Steel Door – LH Hinged
T = Plain Steel Door – RH Hinged
V = Vented Steel Door – LH Hinged
W = Vented Steel Door – RH Hinged
Y = Wardrobe Style Double Plain Steel Doors
Z = Wardrobe Style Double Vented Steel Doors
Packaging Type
No Character = Assembled and Palletized
B = Cabinet Components Bulk Packed For Local Assembly
K = Each Cabinet Individually Flat Packed
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
25
* = MOQ or extended lead
times may apply
Step 1 - Frame Configuration Options
Access, “the original corner-less cabinet”, has been developed and
enhanced with the goal of providing the ultimate 19-inch cabinet
solution. Focused on the demands and expectations of a global
market driven by technology, Access continues to evolve to meet
the new demands and aspirations of the market thanks to the
concept of its modular approach.
Performing a key role, the cabinet is an essential consideration
when deploying an infrastructure solution, as the equipment housed
in the cabinet is often Mission Critical and consequently key to the
success of the business. Designed from the frame up, the Access
Cabinet System has evolved with application excellence and user
friendliness in mind.
Based on a cantilever frame concept, the base structure comprises
tubular frames top and bottom connected by central extrusions. This
design allows unhindered 180 degree clearance around the front
and rear mounting angles, while at the same time, offering clear
access to the internal cabinet envelope. This crucially allows
installation and maintenance to be carried out in a far more efficient
manner and ultimately provides the tool to reduce the total cost of
ownership during the lifetime of the cabinet.
The wide range of cabinet sizes offered provides the ability to
construct a diverse range of internal configurations, allowing both
existing and next generation network components to be housed,
irrespective of their mounting requirements. As a consequence,
Access is equally at home housing 19-inch (EIA-310 compliant),
ETSI (European Telecommunications Standards Institute) or non
rack-mounted units and can be configured to offer combinations of
mounting technologies in one single cabinet structure.
For bayed or ganged installations requiring multiple cabinets bayed
or ganged together, Access enables cabinets to be securely
fastened together by simply bolting the matching central extrusions
together using the pre-drilled bolt-together holes.
In the same way that the internal cabinet arrangement can be
configured, the external cabinet cladding can be specified to meet
individual application requirements. Cladding options include top
panels, base panels, side panels and door options with each of
these explained in more detail on the following pages.
Front to rear adjustment
23.6” (600mm) wide models
Lateral adjustment on
31.5” (800mm) wide models
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
26
Front to rear adjustment
31.5” (800mm) wide models
Step 1 - Frame Configuration Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Rail Position
Access
Rail Type
Unit Height
Unit Width
Frame Style
Unit Depth
Unit Frame Height
Cabinet
Heights
Usable
U’s
22
27
39
42
45*
A 47 8 1 A 1 C G S P P P V A K
Frame Height
in.
(mm)
22U
43.7”
(1111)
27U
39U
42U
45U
52.5”
73.5”
78.7”
84.0”
(1333)
Cabinet + JF
in.
(1867)
(2000)
(2133)
47
47U
87.5”
(2222)
52*
52U
96.2”
(2444)
Frame + Casters Frame + Std Plinth
(mm)
in.
(mm)
in.
(mm)
44.4” (1125)
46.8”
(1188)
47.8”
(1215)
53.1”
74.1”
79.4”
84.6”
55.5”
76.5”
81.8”
87.0”
(1410)
56.6”
77.6”
82.8”
88.1”
(1437)
90.5”
(2299)
91.6”
(2326)
99.3”
(2521)
100.3”
(2548)
(1349)
(1882)
(2015)
(2149)
88.1” (2238)
96.9” (2460)
(1944)
(2077)
(2110)
* Denotes that MOQs or extended lead times may apply
Unit Frame Width
A 47 8 1 A 1 C G S P P P V A K
Cabinet
Width
in.
Dim W
(mm)
19-Inch
Compatible
23-Inch
Compatible
Full Width
Compatible
6
23.6”
(600)
✔
--
--
7
27.6”
(700)
✔
✔
--
8
31.5”
(800)
✔
✔
✔
Unit Frame Depth
Dim D
Cabinet
Depth
6
9*
1
2*
4*
A 47 8 1 A 1 C G S P P P V A K
Std. Rail
Centers
Maximum
Rail Centers
in.
(mm)
in.
(mm)
in.
(mm)
26.6”
36.0”
39.4”
47.2”
55.1”
(675)
16.5”
26.0”
29.3”
37.2”
45.0”
(419)
22.4”
31.9
35.2”
43.1”
51.0”
(570)
(810)
(895)
(1095)
(1295)
(915)
(1000)
(1200)
(1400)
(659)
(744)
(944)
(1144)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
27
(1971)
(2104)
(2237)
Step 1 - Frame Configuration Options
Frame Style
A 47 8 1 A 1 C G S P P P V A K
Frame
Config.
Basic
Frame
Skids
Std.
Plinth
Stabilizing
Plinth
Corner
Adaptor Plate
Jacking
Feet
Castors
A
✔
--
--
--
✔
✔
--
C
G
H
P
Q
L
M
O
U
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
---------
---✔
✔
--✔
--
-----✔
✔
---
-✔
✔
-------
--✔
✔
✔
✔
✔
-✔
-✔
✔
-✔
-✔
✔
--
Rail Type Configuration
Rail
Code
1
2
3
4
5
6
7
8
A 47 8 1 A 1 C G S P P P V A K
Qty.
Rails
Description
Square pierced rails 19-inch centers
Square pierced rails 23-inch centers
#12-24 tapped rails 19-inch centers
#12-24 tapped rails 23-inch centers
Square pierced rails full width
Square pierced rails 19-inch centers
European Telecom Standards
Institute (ETSI) rails
Square pierced rails 19-inch centers
with RCM+ fingers
Rail Position
Frame Width
Frame Capacity - Width
23.6” (600mm) 27.6” (700mm) 31.5” (800mm)
4
4
4
4
4
2
✔
–
✔
–
–
✔
✔
✔
✔
✔
–
✔
✔
✔
✔
✔
✔
✔
4
✔
✔
✔
4
✔
✔
✔
A 47 8 1 A 1 C G S P P P V A K
(mm)
Left
Offset
Right
Offset
Centered
in.
23.6”
(600)
–
–
C
27.6”
(700)
L
R
C
31.5”
(800)
L
R
C
Left Offset
L
Right Offset
R
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
28
Centered
C
Step 2 - Door Configuration Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Front Door Option
Rear Door Option
The Access Cabinet is available with a wide variety
of front and rear door options, all utilizing two point
locking and quick release hinges for easy door
removal. As with the side panels doors can only be
removed once access has been gained to the inside
of the cabinet. The locking system of each door
operates by a single swing handle assembly. Various
types of swing handles are available enabling factory
or user configurable locking methods including;
• Universal key locking swing handles (standard)
• Individually keyed swing handles (front and rear doors operated by
the same unique key)
• Individually keyed swing handles with a master key (front and rear
doors operated by the same unique key with the addition of a master
key to operate a batch of locks)
• Stand alone electronic proximity card locking swing handles – i-PAL
(customer configurable up to 500 users per handle)
• Networked electronic proximity card locking swing handles – i-PAL+
with remote override and monitoring (customer configurable up to
4,000 users per handle)
Standard Lock
Euro-Profile Lock
Combination Lock
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
29
i-PAL Lock
Step 2 - Door Configuration Options
Door Configuration Options
Door
Option
A
B
C
G
H
I
J
L
N
O
P
Q
R
S
T
V
W
Y
Z
A 47 8 1 A 1 C G S P P P V A K
Door Description
Acrylic Glass Door – LH Hinged
Acrylic Glass Door – LH Hinged
Cover Trims
Glass Door (Vented Styles) – LH Hinged
Glass Door (Vented Styles) – LH Hinged
High Flow Server Door With Steel Trims – LH Hinged
High Flow Server Door With Steel Trims – LH Hinged
Wardrobe Style Double Glass Doors
No Door
Glass Door (Non Vented Styles) – LH Hinged
Glass Door (Non Vented Styles) – RH Hinged
Pressurized Rear Door – LH Hinged
Pressurized Rear Door – RH Hinged
Plain Steel Door – LH Hinged
Plain Steel Door – RH Hinged
80% Vented Steel Door – LH Hinged
80% Vented Steel Door – RH Hinged
Wardrobe Style Double Plain Steel Doors
Wardrobe Style Double 80% Vented Steel Doors
C
A&B
Q&R
G&H
S&T
Easily installed
hinging system
L
I&J
Y
V&W
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
30
O&P
Y
Step 3 - Side Panel Configuration Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Side Panel Option
Side Panel Configuration Options
Side Panel
Configuration
A 47 8 1 A 1 C G S P P P V A K
Option Description
P
Plain Side Panels Fitted Both Sides
L
Plain Side Panels Fitted LH Side Only
R
Plain Side Panels Fitted RH Side Only
E*
Vented Side Panels Fitted LH Side Only
F*
Vented Side Panels Fitted RH Side Only
V*
Vented Side Panels Fitted Both Sides
N
No Side Panels Fitted
* Vented side panels are only available as standard in 42U, 45U, and 47U heights
and in 36.0” (915mm), 30.4” (1000mm), and 47.2” (1200mm) depth variants.
Each cabinet side can be fitted with two half-depth side panels filling the
opening between the central extrusion and the front door opening. The
panels are depth specific and being narrower than half the cabinet
depth makes it far easier to handle should they need to be completely
removed.
Each panel is fitted with four quick release hinge pins allowing quick
and easy removal of individual panels in a matter of seconds. This
feature eliminates the need to completely remove individual side panels,
as they can be simply swung open to provide access to the internal
cabinet envelope and helps to eliminate the chances of side panels
getting damaged or lost.
Importantly the quick release hinge pins can only be actuated once
access has been gained inside the cabinet with access into the cabinet
being controlled via the front and rear locking doors.
Side panels are available in plain format for all cabinet sizes and in
vented format for a range of specific unit configurations.
Plain Side Panel
Vented Side Panel
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
31
Step 4 - Top Panel Configuration Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Zone 1
Zone 3
Zone 2
The top frame opening on each Access cabinet offers the opportunity to configure the top panel arrangement to
meet the needs of individual applications. The dynamic part numbering matrix makes provision to specify the panel
layout in three zones, front, middle and rear.
The depth of the cabinet impacts the quantity and type of panels that can be utilized. Details of these layouts are
shown in the table below. In instances where the dynamic part number can no longer relate to individual panels
(for instance where the 47.2” (1200mm) and 55.1” (1400mm) deep cabinets have more than three panels in the top)
The first character (Zone 1) relates to the panel mounted at the front of the cabinet and third character (Zone 3)
relates to the panel fitted in the rear of the cabinet. The second character (Zone 2) then defines the center zone
layout with the defined panel being mounted at the rear of the zone and the remaining opening filled with plain
panels.
Top Panel Configuration Options
Top Panel
Configuration
B
C
D
E
N
P
V
Option Description
A 47 8 1 A 1 C G S P P P V A K
Top Panel
Configuration
Brush Strip Entry Panel
Brush Strip Infill Panel
Enhanced Cable Entry
Vented Brush Strip Panel
No Panel
Plain Panel
Vented Panel
X
2
3
4
5
6
G
Option Description
Plain Infill Panel
2-Way Fan Tray (110v A/C)
3-Way Fan Tray (110v A/C)
2-Way Fan Tray (230v A/C)
2-Way Fan Tray + TCM1000 Controller
3-Way Fan Tray (230v A/C)
Grommet Knockouts
Cabinet Depth
in.
(mm)
Total
Panels
Standard
Panel
Infill Panels
Required
26.6”
(675mm)
2
2
0
36”
(915mm)
3
2
1
39.4”
(1000mm)
3
3
0
47.2”
(1200mm)
4
3
1
55.1”
(1400mm)
4
3
1
Roof Mounted Fan Trays
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
32
Thermally Controlled & Monitored
Roof Fan trays
Step 5 - Color Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Color Options
The Access cabinet is available in a range of standard color options as shown below.
Color Options
Color
Code
A
A 47 8 1 A 1 C G S P P P V A K
Option Description
Color
Code
Option Description
A
Light Gray with Blue Trim
D
Black with Blue Trim
B
Black with Black Trim
G
Light Gray with Mid Gray Trim
C
Light Gray with Black Trim
C
B
D
G
The unique and stylish corner moulding of the Access range provides an easy system for individual branding or
cabinet identification. Silk screening on glass doors is also available.
Standard Trim Color Options
• Black - RAL 9005 (Default)
• Blue - NCS 4550-R90B
• Mid Gray - NCS 4502
Standard Panel Color Options
• Black - RAL 9005 (Default)
• Light Gray - NCS 1502-Y
• Custom color options are available subject
to a single delivery quantity of a minimum of
ten units
Color requirements must be specified
against a standard color system,
e.g. RAL color scheme.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
33
Step 6 - Packaging Options
Frame
Doors
Sides
Tops
Color
Pkg
A 47 8 1 A 1 C G S P P P V A K
Packaging Options
The Access cabinet is available in a range of packaging options to meet the demands of end users and
channel partners.
Color Options
Package Code
No Character
B
C
K
No Character
Assembled and Palletized
A 47 8 1 A 1 C G S P P P V A K
Option Description
Assembled and Palletized
Bulk Packed
Flat Packed and Crated
Flat Packed
B
Bulk Packed
C
Flat Packed and Crated
K
Flat Packed
Specifying & Ordering Component Assemblies
In some cases, it may be advantageous to order cabinets in component parts rather than a top level single
configured part.
The following pages provide an overview of the part number matrixes applicable together with an overview of
the options available. Following a similar layout as that previously outlined for the configured cabinets, the
following pages will look at assemblies in the following order;
• Configuring cabinets for Thermal Loads
• Cabinet frame, including;
• Base mounting options
• Mounting angle types and configurations
• Packaging types
• Mounting rail options
• Base panel options
• Computer floor plinth options
• Top panel options
• Door options (universal for front or rear)
•
•
•
•
•
•
•
•
•
Side panel options
Vertical cable management options
Horizontal cable management options
Universal cable management options
In rack cooling options
Cabinet thermal enhancements
Shelving options
Power distribution options
Access control and environmental monitoring solutions
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
34
Configurating A Cabinet For Thermal Loads
Cabinet Heat Load (kWt)
1
2
3
4
5
6
7
8
9
10 +
Std Network / Cabling Cabinet
✔
--
--
--
--
--
--
--
--
--
Std Server / Switch Cabinet
✔
✔
✔
--
--
--
--
--
--
--
Server / Switch Cabinet + 19-Inch
& / Or Switch Side Blanking Panels
✔
✔
✔
✔
✔
✔
✔
✔
--
--
Forms part of enhanced
cabinet build
Server / Switch Cabinet
+ Vertical Baffles
--
--
--
✔
✔
✔
✔
✔
--
--
Forms part of enhanced
cabinet build
Server / Switch Cabinet + Top &
Bottom Blanking Angles
--
--
--
✔
✔
✔
✔
✔
--
--
Forms part of enhanced
cabinet build
Server / Switch Cabinet + Base
Blanking Assembly
--
--
--
✔1
✔1
✔1
✔1
✔1
--
--
Can form part of enhanced
cabinet build
Enhanced Server / Switch Cabinet
+ Aisle Containment
✔
✔
✔
✔
✔
✔
✔
✔
✔2
✔2
Enhanced Server / Switch Cabinet
+ Ducted Return Air
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Enhanced Server / Switch Cabinet
+ In Row Close Coupled Air / Water
Heat Exchangers
✔3
✔3
✔3
✔3
✔3
✔3
✔3
✔3
✔
✔
Notes
✔1 = Base blanking is designed to stop air leakage through the base of the cabinet.
Cabinet can be sat directly onto the floor but service entry points will need sealing.
✔2 = Assumes aisle containment with in row close coupled heat exchangers.
✔3 = Assumes in row close coupled heat exchangers replace conventional CRAC unit configuration.
35
Thermal Configuration Components
Access Network / Cabling Cabinet - 1kWt Heat Load
The Access Network / Cabling cabinet configuration incorporates vented glazed
front doors and solid steel rear doors. From a thermal management perspective
this cabinet configuration has limited capability to move air through the cabinet
space and is only suitable for housing limited active equipment generating no
more than 1kWt (kilowatt thermal) of heat load.
As with all Access cabinets the configuration can be adapted to suit nearly every
application or demand.
Access Server / Switch Cabinet - 3kWt Heat Load
The Access Server / Switch cabinet configuration incorporates vented doors front
and rear utilizing an 80% free area pattern mesh. Users can choose from a range
door options including flat form single door to double door options through to our
high flow server door configurations.
In normal conditions where installations are operating in line with the ASHRAE
standards these cabinet configurations are capable of managing heat loads of up
to 3kWt. Cooper B-Line always recommends the use of 31.5” (800mm) wide
cabinets when deploying equipment configured to cool using side to side
convection.
Access provides a truly scalable solution design to be adaptable to application
demands
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
36
Thermal Configuration Components
Enhanced Access Server / Switch Cabinet - 8kWt Heat Load
When considering deploying heat loads in excess of 3kWt it can often be beneficial
from an efficiency standpoint to consider deploying baffles and blanking to minimize
recirculation within the cabinet space and segregate your cold air feed from your warm
air return.
The Access Cabinet offers a range of in field retro fit-able
components providing the option to manage air flow within
the cabinet envelope to maximize operational efficiency.
These options include vertical baffle sets, horizontal baffle
sets, 19-inch blanking plates to suit every application, as
well as base blanking options to manage incoming services.
Managing the segregation of supply and return air within the
cabinet envelope can reduce your equipment inlet supply
temperatures as much as 14°F (8°C).
Vertical Baffles for
23.6” (600mm) &
31.5” (800mm)
Wide Cabinets
Wide range of
horizontal blanking
options
Access Aisle Containment
Taking the segregation of the supply and return air one step further, the Access
Aisle Containment system provides a fully retro fit-able option. Designed to
mount to the Access cabinet, the Access Aisle Containment solution offers a
truly scalable solution which can be easily adapted to meet individual locations
or installations.
Utilizing a range of roof options and sliding end of aisle door options the Access
Aisle Containment solution can be configured to ensure that either the supply
air (cold aisle containment) or exhaust air (hot aisle containment) is managed.
In the case of cold aisle containment the only path of exit for the cold air is
through the active component where it provides maximum cooling effect. In
addition a contained cold aisle ensures a more uniform air delivery temperature
within in the contained aisle.
In the case hot aisle containment the warm air is cycled back to the cooling
medium (CRAC or in row cooling unit) at a higher temperature providing
significantly improved cooling efficiency.
Whatever the demand, Cooper B-Line has a solution to help improve your
cooling efficiency and reducing your operating costs.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
37
Component Assembly Specification & Part Numbers
Frame Only Assemblies
Front to rear adjustment
23.6” (600mm) wide
models
Lateral adjustment on
31.5” (800mm) wide
models
Front to rear adjustment
31.5” (800mm) wide
models
A 47 8 1 A 1 C A K
Access
Unit
Heights
47 = 47U
45* = 45U
42 = 42U
39 = 39U
27 = 27U
22 = 22U
Unit Widths
6 = 23.6” (600mm)
7 = 27.6” (700mm)
8 = 31.5” (800mm)
Unit Depths
6 = 27” (675mm)
9 = 37” (915mm)
1 = 40” (1000mm)
2 = 48” (1200mm)
4* = 56” (1400mm)
Mounting Rails
1 = Sq. Hole 19-inch (x4)
2 = Sq. Hole 23-inch (x4)
3 = #12-24 Tap 19-inch (x4)
4 = #12-24 Tap 23-inch (x4)
5 = Sq. Hole Full Width (x4)
6 = Sq. Hole 19-inch (x2)
7 = Sq. Hole ETSI (x4)
8 = Sq. Hole 19-Inch with
RCM+ Fingers (x4)
Rail Positions
L = Left
R = Right
C = Center
Color Codes
A = Light Gray with
Blue Trim
B = Black with
Black Trim
C = Light Gray with
Black Trim
D = Black with
Blue Trim
G = Light Gray with
Mid Gray Trim
Frame Configuration
Packaging
A = Frame With Corner Plates & Jacking Feet
C = Frame Without Corner Plates
Refer to page 25 for other configurations
No Character = Assembled and Palletized
K = Each Cabinet Individually Flat Packed
B = Cabinet Components Bulk Packed For Local Assembly
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
38
Component Assembly Specification & Part Numbers
Effective
Unit Height
22U
Overall Frame
Height *
Part Number
Width
in.
(mm)
in.
(mm)
in.
(mm)
43.7”
(1111)
23.6”
31.5”
(600)
26.6”
26.6”
(675)
26.6”
36.0”
39.4”
26.6”
36.0”
39.4”
26.6”
36.0”
39.4”
26.6”
36.0”
39.4”
26.6”
36.0”
39.4”
47.2”
26.6”
36.0”
39.4”
47.2”
26.6”
36.0”
39.4”
47.2”
26.6”
36.0”
39.4”
47.2”
26.6”
36.0”
39.4”
47.2”
26.6”
36.0”
39.4”
47.2”
(675)
23.6”
27U
52.5”
23.6”
73.5””
23.6”
78.7”
23.6”
†
84.0”
23.6”
87.5”
(600)
(800)
(600)
(800)
(600)
(2133)
31.5”
47U
(800)
(2000)
31.5”
45U
(600)
(1867)
31.5”
42U
(800)
(1333)
31.5”
39U
Depth
(800)
(600)
(2222)
31.5”
(800)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
(915)
(1000)
(1200)
(675)
(915)
(1000)
(1200)
(675)
(915)
(1000)
(1200)
(675)
(915)
(1000)
(1200)
(675)
(915)
(1000)
(1200)
(675)
(915)
(1000)
(1200)
in.
(kg)
A 22 6 6 X X C X
A 22 8 6 X X C X
82.9
114.2
(37.6)
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
93.9
114.6
137.8
168.0
190.0
211.8
120.4
142.4
164.2
151.0
173.4
216.2
127.0
149.0
170.8
192.9
156.9
179.0
210.0
222.9
137.8
160.0
181.9
203.9
168.0
190.0
211.8
233.9
137.8
160.0
181.9
203.9
168.0
190.0
211.8
233.9
(42.6)
27
27
27
47
47
47
39
39
39
39
39
39
42
42
42
42
42
42
42
42
45
45
45
45
45
45
45
45
47
47
47
47
47
47
47
47
6
6
6
8
8
8
6
6
6
8
8
8
6
6
6
6
8
8
8
8
6
6
6
6
8
8
8
8
6
6
6
6
8
8
8
8
6
9
1
6
9
1
6
9
1
6
9
1
6
9
1
2
6
9
1
2
6
9
1
2
6
9
1
2
6
9
1
2
6
9
1
2
XXCX
XXCX
XXCX
■ ■ ■ ■
■ ■ ■ ■
■ ■ ■ ■
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
* Overall frame height is based on frame mounted on standard nylon foot
For jacking feet add 0.6” (15.4mm). For castors add 2.8” (70.9mm). For plinths add 4.1” (104.9mm)
† Denotes non-stocked size.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
39
Shipping
Weight
See Legend
On Page 38
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
(51.8)
(52.0)
(62.5)
(76.2)
(86.2)
(96.1)
(54.6)
(64.6)
(74.5)
(68.5)
(78.2)
(98.1)
(57.6)
(67.6)
(77.5)
(87.5)
(71.2)
(81.2)
(91.2)
(101.1)
(62.5)
(72.6)
(82.5)
(92.5)
(76.2)
(86.2)
(96.1)
(106.1)
(62.5)
(72.6)
(82.5)
(92.5)
(76.2)
(86.2)
(96.1)
(106.1)
X - Denotes Options
Component Assembly Specification & Part Numbers
Mounting Angle Only Options
The Access range is available with a range of mounting angles options that can be configured in the basic
cabinet frame assembly as indicated on pages 25 & 28. If required, individual rails can be ordered separately
as detailed below. Each rail assembly is supplied complete with standard fixings for mounting to the Access
cabinet basic frame.
Vertical 19-Inch Mounting Angles
Part Number
AVM22
AVM27
AVM39
AVM42
AVM47
Description
22U
27U
39U
42U
47U
Part Number
Finish: Painted standard silver.
AVM22T
AVM27T
AVM39T
AVM42T
AVM47T
Square
Square
Square
Square
Square
pierced
pierced
pierced
pierced
pierced
19-inch
19-inch
19-inch
19-inch
19-inch
mounting
mounting
mounting
mounting
mounting
angles
angles
angles
angles
angles
(pair)
(pair)
(pair)
(pair)
(pair)
Description
22U
27U
39U
42U
47U
Pre-tapped
Pre-tapped
Pre-tapped
Pre-tapped
Pre-tapped
19-inch
19-inch
19-inch
19-inch
19-inch
mounting
mounting
mounting
mounting
mounting
angles
angles
angles
angles
angles
(pair)
(pair)
(pair)
(pair)
(pair)
ETSI
Part Number
EVM39E
EVM42E
EVM47E
Description
Access 39U compatible ETSI mounting angle – 69SU (pair)
Access 42U compatible ETSI mounting angle – 74SU (pair)
Access 47U compatible ETSI mounting angle – 83SU (pair)
Finish: Painted standard silver.
Vertical 19-Inch Mounting Angles With RCM+
Part Number
AVM22RCM
AVM27RCM
AVM39RCM
AVM42RCM
AVM47RCM
Description
22U 19-inch square pierced mounting angle with RCM+ fingers (pair)
27U 19-inch square pierced mounting angle with RCM+ fingers (pair)
39U 19-inch square pierced mounting angle with RCM+ fingers (pair)
42U 19-inch square pierced mounting angle with RCM+ fingers (pair)
47U 19-inch square pierced mounting angle with RCM+ fingers (pair)
Finish: Painted standard silver.
Notes
• All rails are finished painted flat silver with printed unit height markings on all 19-inch mounting rails (marked bottom to top)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
40
Component Assembly Specification & Part Numbers
Mounting Angle Only Options
Vertical Intermediate Rail
Part Number
IMP22
IMP27
IMP39
IMP42
IMP47
Finish: Painted standard silver.
Description
Access
Access
Access
Access
Access
22U
27U
39U
42U
47U
vertical
vertical
vertical
vertical
vertical
intermediate
intermediate
intermediate
intermediate
intermediate
rail
rail
rail
rail
rail
(each)
(each)
(each)
(each)
(each)
IMP Rails provide a side mounting facility mounted on the Access central extrusions.
The rail provides a central support position for any heavy full depth equipment.
600mm Wide Server Beam
Part Number
ASB600
Description
Access cabinet 600mm wide server beam (each)
Finish: Painted standard silver.
800mm Wide Adaptor Channel
Part Number
AA8
Description
Access cabinet 800mm wide adaptor channel (each)
Finish: Painted standard silver.
Full Width to 19-Inch Adaptor Plates
Part Number
AFWA2AS
AFWA3AS
AFWA6AS
AFWA12AS
Finish: Painted standard silver.
Description
Access cabinet full width to 19-inch adaptor plates 2U (supplied in pairs)
Access cabinet full width to 19-inch adaptor plates 3U (supplied in pairs)
Access cabinet full width to 19-inch adaptor plates 6U (supplied in pairs)
Access cabinet full width to 19-inch adaptor plates 12U (supplied in pairs)
Full width to 19-inch adaptors are only compatible with the Access 31.5” (800mm) wide range
with the mounting rails set in full width configuration. Supplied complete with hardware and
assembly instructions.
ETSI to 19-Inch Adaptor Plates
Part Number
AEAP2AS
AEAP3AS
Description
Access cabinet ETSI to 19-inch adaptor plates 2U (supplied in pairs)
Access cabinet ETSI to 19-inch adaptor plates 3U (supplied in pairs)
ETSI to 19-inch adaptors allow both ETSI and 19-inch mounted equipment to be configured
in the same cabinet frame. Supplied complete with fixings and assembly instructions.
Finish: Painted standard silver.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
41
Component Assembly Specification & Part Numbers
Cabinet Base Mounting Options
The Access cabinet is fitted with Nylon feet as standard which protrude 0.4” (10mm) below the bottom of the
Access frame. The Access range offers the ability to configure the bottom of the cabinet with a range of mounting
and fixing options, details of which are shown below.
Part
Number
Description
Access universal
corner adaptor
plates (Set of 4)
APKCPK
Castor Installed With
Jacking Feet
Bolt Down
Facility
Jacking
Feet
Castors
Jacking
Feet & Castors
✔
✔
✔
✔*
* The universal corner adaptor plate requires an adaptor kit to allow jacking feet and castors to
be fitted at the same time – please order kit AUCPAK in addition to the adaptor plates.
Universal Corner Plate + Castor
These simply bolt onto either the standard or universal corner adaptor plates
increasing the overall height of the cabinet by 3” (77.9mm). The castors are
supplied in set of four and come with a screw in brake facility.
Castor Kit
Order Code
Description
ACK
Access castor kit (Set of 4)
Universal Corner Plate + Jacking Foot
Like the castors these simply bolt onto the universal corner adaptor plates providing
the ability to level the cabinet when mounted onto uneven surfaces. Increases the
overall height of the cabinet by 0.6” (15.4mm).
Order Code
AJF
Description
Access jacking foot kit (Set of 4)
Jacking Foot Kit
Standard Plinth Kit
The standard plinth kit comprises of four special corner adaptor plates which bolt to the
underside of the cabinet raising the cabinet by a nominal 4.1” (104.9mm). Each corner
adaptor allows jacking feet and/or castors to be mounted and provides the fixing points
for the removable kick plates which screw fix onto the front, rear and sides.
Plinth Kit
* Please Note - The
plinth kit requires either
jacking feet or castors to
be mounted to the corner
adaptor plates before it
can support the cabinet’s
weight.
Part
Number
Part Number
(Inc. Jacking Feet)
AMP66*
AMP69*
AMP61*
AMP62*
AMP64*
AMP86*
AMP89*
AMP81*
AMP82*
AMP84*
AMP66JF
AMP69JF
AMP61JF
AMP62JF
AMP64JF
AMP86JF
AMP89JF
AMP81JF
AMP82JF
AMP84JF
Cabinet
Size
23.6”
23.6”
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
31.5”
31.5”
(600mm) Wide x 26.6” (675mm) Deep
(600mm) Wide x 36.0” (915mm) Deep
(600mm) Wide x 39.4” (1000mm) Deep
(600mm) Wide x 47.2” (1200mm) Deep
(600mm) Wide x 55.1” (1400mm) Deep
(800mm) Wide x 26.6” (675mm) Deep
(800mm) Wide x 36.0” (675mm) Deep
(800mm) Wide x 39.4” (1000mm) Deep
(800mm) Wide x 47.2” (1200mm) Deep
(800mm) Wide x 55.1” (1400mm) Deep
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
42
Component Assembly Specification & Part Numbers
Stabilizing Plinth Kit
Like the standard plinth, the stabilizing plinth kit comprises of special corner adaptor plates with jacking foot
and/or castor provision. The rear and side kick plates simply screw to the corner plates while the front kick plate
pulls out to reveal a stabilizing bar. The stabilizing bar can be retracted after use to avoid potential trip hazards.
The standard assembly includes two jacking feet fitted to the stabilizing bar but requires either jacking feet or
castors to be fitted to the corner plates before the plinth assembly can support the cabinet’s weight. The jacking
feet and castors should be ordered separately.
Nominally the plinth assembly increases the overall height of the cabinet by 4.1” (104.9mm).
Stabilizing Plinth Kit
Part
Number
Part Number
(Inc. Jacking Feet)
Cabinet
Size
SAM66
SAM69
SAM61
SAM62
SAM64
SAM86
SAM89
SAM81
SAM82
SAM84
SAM66JF
SAM69JF
SAM61JF
SAM62JF
SAM64JF
SAM86JF
SAM89JF
SAM81JF
SAM82JF
SAM84JF
23.6” (600mm) Wide x 26.6” (675mm) Deep
23.6” (600mm) Wide x 36.0” (915mm) Deep
23.6” (600mm) Wide x 39.4” (1000mm) Deep
23.6” (600mm) Wide x 47.2” (1200mm) Deep
23.6” (600mm) Wide x 55.1” (1400mm) Deep
31.5” (800mm) Wide x 26.6” (675mm) Deep
31.5” (800mm) Wide x 36.0” (675mm) Deep
31.5” (800mm) Wide x 39.4” (1000mm) Deep
31.5” (800mm) Wide x 47.2” (1200mm) Deep
31.5” (800mm) Wide x 55.1” (1400mm) Deep
* Please Note - The plinth kit requires either jacking feet or castors to be mounted to
the corner adaptor plates before it can support the cabinet’s weight.
Computer Floor Plinth
The Access computer floor plinth has been designed to mount to the pedestals of
most conventional raised floor structures. Available in a range of layouts and sizes, the
plinth structure nominally allows cabinets to sit of a single tile depth (47.2” (1200mm)
and 55.1” (1400mm) deep cabinets sit on two tiles depth wise). Although the cabinet
nominally overlaps the tiles immediately in front and behind, the plinth securely raises
the cabinet slightly above the floor level. This allows the tiles to the front or rear of the
cabinet to be easily removed even when the cabinets are fully loaded.
The number of tiles on the width is variable and depends on the number of cabinets
per plinth. Where the plinth layout does not match an exact tile spacing, the plinth
includes an adjustable angle to support the cut tile. Each assembly is supplied complete with all applicable fixings
and clamp brackets. A range of blanking options are available and these can be tailored to meet the needs of
individual installations or cabinet layouts.
This system offers potential savings as the plinth simply replaces the normal tile. By doing this, it avoids the costly
cutting of tiles. The system also allows cabinets to be bayed closely together avoiding creep in layouts and
maximizing space within the data room.
Cabinet
Width
1
Remove floor tiles
2
Secure stringers if
needed
5
4
Secure plinth to floor
Place and secure
cabinet
3
Fit Plinth
into opening
Cabinet
Depth
in.
(mm)
in.
(mm)
23.6”
23.6”
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
31.5”
31.5”
600
26.6”
36.0”
39.4”
47.2”
55.1”
26.6”
36.0”
39.4”
47.2”
55.1”
675
600
600
600
600
800
800
800
800
800
915
1000
1200
1400
675
915
1000
1200
1400
Single
Bay
Option
Two
Bay
Option
A6FP61
A6FP91
A6FP101
A6FP121
A6FP141
A8FP61
A8FP91
A8FP101
A8FP121
A8FP141
A6FP62
A6FP92
A6FP102
A6FP122
A6FP142
A8FP62
A8FP92
A8FP102
A8FP122
A8FP142
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
43
Three
Bay
Option
Four
Bay
Option
A6FP63 A6FP64
A6FP93 A6FP94
A6FP103 A6FP104
A6FP123 A6FP124
A6FP143 A6FP144
A8FP63
A8FP93
A8FP104
A8FP123
A8FP143
-
Component Assembly Specification & Part Numbers
Base Panel Options
The open frame design of Cooper B-Line’s Access cabinet provides
unrivaled cable entry capability thanks to its tubular center frame
design. While this scenario can be ideal for some applications, other
installations require the top and bottom cabinet open areas to be
blanked off to reduce the ingress of dust or to control the thermal
characteristics within the cabinet.
The Access cabinet base blanking panel system provides a
configurable solution capable of being tailored to meet the demands
of individual applications. The assembly comprises a fixed frame,
which then accommodates the mounting of a range of blanking panel
or air ducting options. The number of panel spaces is dependent on
the depth of the cabinet with details indicated below.
The base frames can be fitted with or without either the nylon skids
or jacking feet. Just bolt to the underside of the base cabinet frame.
The 31.5” (800mm) wide variant provides a brush strip entry front to
rear offering a cable opening size of 19.7” (500mm) x 2.1” (53mm). With
the center blanking panels removed, the 31.5” (800mm) wide variant
also offers the ability to slide the brush strip sections in board
providing cabling clearance of 9.1” (230mm) to ease cabling
installation.
For applications where the cabinet will be mounted on a level raised
floor structure, the standard nylon skids can be removed allowing the
cabinet frame to sit directly onto the floor. This provides a seal
between the floor and the cabinet eliminating the problem of trying
to manage the sealing of the floor void at the tile level. In this
configuration, the brush strip cable entries in the base blanking
panels effectively provide sealing around the cable bundles.
Frame Assemblies
Part
Number
ACBBF606B
ACBBF610B
ACBBF612B
ACBBF614B
ACBBF806B
ACBBF810B
ACBBF812B
ACBBF814B
Cabinet Width
in.
(mm)
23.6”
(600)
31.5”
(800)
Cabinet Depth
in.
26.6”
39.4”
47.2”
55.1”
26.6”
39.4”
47.2”
55.1”
(mm)
(675)
(1000)
(1200)
(1400)
(675)
(1000)
(1200)
(1400)
Blanking
Locations
2
4
5
6
2
4
5
6
* Please Note – Base panel assemblies are available as standard finished
in black RAL 9005 only. Panels shown light gray finish for clarity only.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
44
Component Assembly Specification & Part Numbers
Blanking Assemblies
Description
Blanking Value
Part Number
Supplied with quick fit 1/4 turn tool-less fasteners
allowing easy fitting. Simply align the panel with the
corresponding holes in the base frame and secure
in position using the captive hardware to provide
an effective blanking solution.
1
ACBBPPB
Like the plain blanking panels, these units take up
one unit space and also incorporate the same
tool-less 1/4 turn fasteners. The brush strip blanking
panels offer a cabling opening of 13.8” (350mm) x
2.5” (64mm) and can be fitted with the brush facing
the front or rear of the cabinet. Two panels can be
mounted with the brush on the mating joint providing
a cabling opening of 13.5” (350mm) x 5” (128mm).
1
ACBBBPB
The deflector cowl has been designed to control the
air flow from the floor void immediately under the
cabinet. The cowl directs the air to the area in front
of the 19-inch mounting angles ensuring that the cold
air can effectively feed the cooling requirements for a
normally aspirated piece of active equipment. The air
damper incorporated in the unit allows the user to
balance the air flow to the cabinet allowing fine tuning
of groups of cabinets. This unit takes up two unit
blanking spaces and mounts in the bottom 3U of
the cabinet.
2
ACBBDAB
Designed to be used in conjunction with the 2U
Scavenger fan tray this unit takes up the two
blanking spaces. Like the blanking panels the duct
simply aligns with the corresponding holes in the base
frame and secures in position using the captive
tool-less 1/4 turn fasteners.
2
ACBBSFDB
The 2U Scavenger Fan Tray simply mounts into
the bottom 2U of the cabinet and rests on the
Scavenger fan tray cowl. Scavenger fan tray protrudes
through the 19-inch opening by approximately 4” (100mm)
and is designed, like the air deflector, to pull cold air
from the floor void immediately under the cabinet and
feed the cold air to the area in front of the 19-inch
mounting angles. For further details of the fan tray
please see pages 80-81.
2
See pages 80-81
for details
Plain Blanking Panel
Brush Strip Blanking Panel
Air Deflector Cowl
Scavenger Fan Tray Duct
2U Scavenger Fan tray
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
45
Component Assembly Specification & Part Numbers
Top Panel Options
Designed for exceptional flexibility by using separate interchangeable panels
The panels can be fitted in various positions, giving you a wide choice of combinations to suit your application.
Panels can be completely removed for a totally open cable access area if required.
For optimum forced air cooling, fans are offset within the panel. The tray can then be rotated through 180° to
‘fine tune’ the cooling system when equipment is mounted within the cabinet.
Cabinet Depth
in.
(mm)
Total
Panels
Standard
Panel
Infill Panels
Required
26.6”
(675mm)
2
2
0
36”
(915mm)
3
2
1
39.4”
(1000mm)
3
3
0
47.2”
(1200mm)
4
3
1
55.1”
(1400mm)
4
3
1
Part Number
Cabinet Width
Top Panel
Style
Plain Top Panel
Plain
Vented
Vented Top Panel
Brush Strip Entry
Enhanced Brush
Strip Top Panel
Brush Strip Top Panel
Infill for Cab.
Depth 36.0” (915mm)
Infill for Cab.
Depth 47.2” (1200mm)
Enhanced Brush Strip Top Panel
in.
(mm)
lbs.
(kg)
ATP 6 _
ATP 7 _
ATP 8 _
ATP V6 _
ATP V7 _
ATP V8 _
ATP BS6 _
ATP BS7 _
ATP BS8 _
ATPEBS6 _
ATPEBS7 _
ATPEBS8 _
ATPBSK _
ATP I 69 _
ATP I 79 _
ATP I 89 _
ATP I 6 _
ATP I 7 _
ATP I 8 _
23.6”
27.6”
31.5”
23.6”
27.6”
31.5”
23.6”
27.6”
31.5”
23.6”
27.6”
31.5”
-23.6”
27.6”
31.5”
23.6”
27.6”
31.5”
(600)
(700)
(800)
4.0
4.4
4.8
2.6
3.0
3.3
4.2
4.5
4.8
4.2
4.4
5.0
0.9
7.0
7.5
7.9
8.6
9.0
9.4
(1.8)
(2.0)
(2.2)
__ Color Scheme Options
A = Light Gray
B = Black
Infill Panel
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
46
Shipping Wt.
See Chart below to
Complete Part #
(600)
(700)
(800)
(600)
(700)
(800)
(600)
(700)
(800)
-(600)
(700)
(800)
(600)
(700)
(800)
(1.2)
(1.3)
(1.5)
(1.9)
(2.1)
(2.2)
(1.9)
(2.0)
(2.3)
(0.4)
(3.2)
(3.4)
(3.6)
(3.9)
(4.1)
(4.3)
Component Assembly Specification & Part Numbers
Overview
Thermal management within 19” cabinets has always proved
challenging. The Access cabinet range provides effective natural
convection cooling within its core design. Where additional
forced cooling is necessary, Cooper B-Line offers a range of
complementary products to enhance system cooling.
Roof Mounted Fan Trays
Roof
Mounted
Fan Trays
Description
2-Way Fan Tray – 230v AC
3-Way Fan Tray – 230v AC
2-Way Fan Tray – 110v AC
3-Way Fan Tray – 110v AC
Part
Number
in.
A6FT_
A8FT_
A6FT3_
A8FT3_
ATP62_
ATP82_
ATP63_
ATP83_
23.6”
31.5”
23.6”
31.5”
23.6”
31.5”
23.6”
31.5”
Features:
• Replaces vented or plain top panels
• Simple 2 fastener hardware
• Can be turned 180o
• Can be fitted at front, center and rear
(center on 36.0” (915mm) or deeper cabinets only)
Width
(mm)
Fan Specification:
• Airflow - 1722 cubic feet (160 cubic meters) per hour
• Speed - 2650 rpm
• Current - 0.12 amps
• Noise Level - 42dB
(600)
(800)
(600)
(800)
(600)
(800)
(600)
(800)
__ Color Scheme Options
A = Light Gray
B = Black
Part Numbers denote products finished standard light gray and blue
Thermally Controlled and Monitored Fan Trays
Constantly monitoring its surroundings and adjusting fan
speed by temperature, the Monitored Roof Fan Tray is
available in 23.6” (600mm) and 31.5” (800mm) wide versions and
represents the latest capabilities in thermal management.
Features:
• Replaces vented or plain top panels
• Simple two fastener hardware
• Can be turned 180o
• Can be fitted at front, center and rear (center on 35” (875mm)
Thermally Controlled & Monitored
or deeper racks only)
Roof Fan trays
• Dual thermostat control
• Volt-free relay output and tri-color LED for alarm outputs
Part
Cabinet
• Fan failing alarm
Description
Number
Width
• Thermostat failure and over-temperature alarm
in.
(mm)
• User programmable temperature settings
Monitored Fan Tray
A6FTECM_ 23.6” (600)
Technical Overview:
Monitored Fan Tray
A8FTECM_ 31.5” (800)
• Constructed of powder coated 18 gauge steel
Part Numbers denote products finished standard light gray
and blue
__ Color Scheme Options
A = Light Gray
B = Black
Fan Specification:
• Speed - Variable
• Noise level - Variable
• Voltage - 100/230V AC input - 12V DC fans
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
47
Component Assembly Specification & Part Numbers
Side Panel Options
Side panels are supplied as a twin set per side
• Split depth for space saving and easy access
• Pivots left or right on internal quick release latches
• Lightweight, easily removed
A PSP 47 6 A
Access
Unit Height
Unit Depth
47 = 47U
42 = 42U
39 = 39U
27 = 27U
22 = 22U
6 = 26.6” (675mm)
9 = 36.0” (915mm)
1 = 39.4” (1000mm)
2 = 47.2” (1200mm)
4 = 55.1” (1400mm)
Panel Type
PSP = Plain Side Panel
VSP* = Vented Side Panel
* Vented Side Panels
are only available in
42U and 47U heights
and in depths of
875mm, 1000mm
and 1200mm.
Unit Height
EIA Mtg. Units
47U
42U
39U
27U
22U
Part Number
See Chart above to
Complete Part #
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
47
47
47
47
47
42
42
42
42
42
39
39
39
27
27
27
22
6
9
1
2
4
6
9
1
2
4
6
9
1
6
9
1
6
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
Depth
(mm)
lbs.
(kg)
26.6”
36.0”
39.4”
47.2”
55.1”
26.6”
36.0”
39.4”
47.2”
55.1”
26.6”
36.0”
39.4”
26.6”
36.0”
39.4”
26.6”
(675)
(915)
(1000)
(1200)
(1400)
32.6
44.3
48.5
58.2
67.9
29.3
39.9
43.6
52.2
61.0
27.3
37.2
40.7
19.6
26.6
29.1
16.3
(14.8)
(20.1)
(22.0)
(26.4)
(30.8)
(675)
(915)
(1000)
(675)
(915)
(1000)
(675)
A = Light Gray
B = Black
Shipping Wt.
in.
(675)
(915)
(1000)
(1200)
(1400)
Color Scheme Options
(13.3)
(18.1)
(19.8)
(23.7)
(27.7)
(12.4)
(16.9)
(18.5)
(8.9)
(12.1)
(13.2)
(7.4)
Vented Side Panel
Plain Side Panel
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
48
Component Assembly Specification & Part Numbers
Door Options
Access Door Part Codes
A AD 47 6 A CL
Access
Side Panel
Unit Height
47 = 47U
42 = 42U
39 = 39U
32 = 32U
27 = 27U
22 = 22U
Cabinet
Width
Door Type
AD = Acrylic Glass Door – LH
BD = Acrylic Glass Door – RH
CT = Access Cover Trims
GD = Glass Door (Vented Styles) – LH
FD = Glass Door (Vented Styles) – RH
HFD = High Flow Server Door With Metal Trims – LH
HGD = High Flow Server Door With Metal Trims – RH
VPD = Pressurized Rear Door – LH
VRD = Pressurized Rear Door – RH
SD = Plain Steel Door – LH
TD = Plain Steel Door – RH
VSD = Vented Steel Door – LH
WSD = Vented Steel Door – RH
DGD = Wardrobe Style Double Glass Doors
DSD = Wardrobe Style Double Plain Steel Doors
ZD = Wardrobe Style Double Vented Steel Doors
DSG = Wardrobe Style Double Glazed Doors
Light Gray & Blue Cabinets
Shown For Clarity Only
Standard Default Finish Is
Black With Black Trim
6 = 600mm
8 = 800mm
Config. / Color Scheme
A = Light Gray + Blue Trim
AS = Light Gray + Blue Trim
B = Black + Black Trim
BAS = Black + Black Trim
C = Light Gray + Black Trim
D = Black + Blue Trim
G = Light Gray + Mid Gray Trim
Latch Handle Type
Blank = Std Swing Handle
CL = Combination LockSwing
Handle
EL = Euro Lock Swing Handle
(no insert)
IP = i-PAL Swing Handle
Access Acrylic Door
The Access Cabinet Acrylic Glass Door is made up of a door frame with a 0.16” (4mm) smoke gray Perspex
window clamped into the glass opening. Door features are as follows;
•
•
•
•
Doors can be supplied left hand (AAD series) or right hand (ABD series) hinged
Supplied with two point locking espan assembly latching into the cabinet frame top and bottom
Fitted with keyed swing handle as standard
Other locking options available including: Euro profile inserts, mechanical combination swing handle and
i-PAL electronic lock
23.6” (600mm) Wide Door
Unit Height
EIA Mtg.
Units
Part Number
47U
42U
39U
27U
A _ 47 6 BAS _
A _ 42 6 BAS _
A _ 39 6 BAS _
A _ 27 6 BAS _
31.5” (800mm) Wide Door
Width
See Chart above
to Complete Part #
Shipping
Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
23.6”
(600)
44.5
39.7
33.0
13.0
(20.2)
(600)
(600)
(600)
(18.0)
(15.0)
(5.9)
Unit Height
EIA Mtg.
Units
Part Number
47U
42U
39U
27U
A _ 47 8 BAS _
A _ 42 8 BAS _
A _ 39 8 BAS _
A _ 27 8 BAS _
Width
See Chart above
to Complete Part #
in.
(mm)
lbs.
(kg)
31.5”
31.5”
31.5”
31.5”
(800)
55.5
49.6
41.2
16.1
(25.2)
Sample code for a left hand hinged 42U x 23.6” (600mm) wide assembly with standard locking – AAD426B
49
Shipping
Weight
(800)
(800)
(800)
(22.5)
(18.7)
(7.3)
Access Cover Trims
The Access Cabinet Cover Trims provide the ideal solution when constant access is required to the 19-inch equipment.
• Comprises of two vertical hinged styles, the cover trims are simply secured in the closed position using simple
magnets top and bottom
• Cover trims allow vertical cabling to be discreetly covered leaving full view of the complete 19-inch opening
Unit Height
EIA Mtg.
Units
47U
42U
39U
47U
42U
39U
Part Number
ACT476
ACT426
ACT396
ACT478
ACT428
ACT398
_
_
_
_
_
_
Width
Shipping
Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
(600)
15.0
13.4
12.5
15.0
13.4
12.5
(6.8)
(600)
(600)
(800)
(800)
(800)
(6.1)
(5.7)
(6.8)
(6.1)
(5.7)
Sample code for a
42U x 31.5” (800mm)
wide assembly finished Black with
Black trim is
ACT428B
__ Color Scheme Options
A = Light Gray
B = Black
Access Standard Glass Doors
The standard Access Cabinet Glass Door is made up of two vertical vented door styles with a piece of 0.16” (4mm)
tinted toughened glass structurally bonded to the styles. The vertical vent pattern on each of the doors styles
provides some air flow into the cabinet but of applications where active equipment is deployed it is recommended
that the Access Vented Steel Door or the Access High Flow Server Door is specified.
Features include;
• Color coded hardware incorporating quick release hinge mechanisms
• Doors can be supplied left hand (AGD series) or right hand (AFD series) hinged
• Supplied with two point locking espan assembly latching into the cabinet frame top and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro profile inserts, mechanical combination swing handle and
i-PAL electronic lock
Unit Height
EIA Mtg.
Units
47U
42U
39U
27U
22U
47U
42U
39U
27U
22U
Part Number
A__476BAS
A__426BAS
A__396BAS
A__276BAS
A__226BAS
A__478BAS
A__428BAS
A__398BAS
A__278BAS
A__228BAS
Width
Shipping
Weight
in.
(mm)
lbs.
(kg)
_
_
_
_
_
23.6”
23.6”
23.6”
23.6”
23.6”
(600)
(16.0)
_
_
_
_
_
31.5”
31.5”
31.5”
31.5”
31.5”
(800)
35.2
31.5
29.3
20.3
16.5
46.9
42.1
39.0
27.1
22.0
(600)
(600)
(600)
(600)
(800)
(800)
(800)
(800)
(14.3)
(13.3)
(9.2)
(7.5)
(21.3)
(19.1)
(17.7)
(12.3)
(10.0)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
50
Sample code for a
left hand hinged
42U x 23.6” (600mm)
wide assembly with
standard locking –
finished Black with
Black trim is
AGD426BAS
Component Assembly Specification & Part Numbers
Access Wardrobe Style Double Glass Doors
The Access Cabinet Wardrobe Style Double Glass Door assembly is made up of two door sections, each
comprising of two vertical door styles with a piece of 0.16” (4mm) tinted toughened glass structurally bonded to the
styles.
Door features are as follows;
• Right hand door section traps the left hand door section as standard
• Supplied with two point locking espan assembly latching behind the cabinet frame top
and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro profile inserts, mechanical combination
swing handle and i-PAL electronic lock
Unit Height
EIA Mtg. Units
47U
42U
39U
47U
42U
39U
Part Number
ADGD476BAS _
ADGD426BAS _
ADGD396BAS _
ADGD478BAS _
ADGD428BAS _
ADGD398BAS _
Width
Shipping Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
(600)
(600)
(600)
39.4
35.3
32.8
52.4
46.9
43.4
(17.9)
(16.0)
(14.9)
(800)
(800)
(800)
(23.8)
(21.3)
(19.7)
Sample code for a
left hand hinged
42U x 23.6” (600mm)
wide assembly with
standard locking –
finished Black with
Black trim is
ADGD426BAS
Access High Flow Server Door
Equipment cooling continues to be one of the most important challenges that IT technicians and data center
manager’s face today. The Access Cabinet High Flow Server Doors are designed to maintain critical enclosure
security, while at the same time providing volume airflow for the essential thermal management of active equipment.
By using a combination of high density perforated sheet, forming the door in a bowed corrugation our engineers
have been able to design a range doors to offer a minimum of 84% free area in relation to the free opening through
the 19-inch mounting angles.
These doors can be retro fitted to existing Access Cabinets deployed in the field and can be hung either left or
right hand hinged utilizing the same convenient quick fit hinge found on our standard doors. In addition, these
doors are fully compatible with our range of standard swing handle locks, mechanical combination locks and i-PAL
electronic locks continuing our evolution of modular solutions designed to grow with demand.
As well as the thermal benefits, the Access Cabinet High Flow Server Door range also offers an aesthetically
pleasing product with functional benefits. Doors can be supplied with the option of either blue or black color coded
moulded trims or customer configurable metal trims. The metal trims offer the opportunity to easily achieve
customer centric branding or the ability to easily distinguish and identify a cabinet’s function.The formed bowed door
also offers additional clearance between the face of the 19-inch mounting angles and the inside face of the door
ensuring that active equipment is able to operate in the most efficient way.
Features include;
• Doors can be supplied left hand (AHFD series) or right hand (AHGD series) hinged
• Supplied with two point locking espan assembly latching into the cabinet frame top and
bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro profile inserts, mechanical combination
swing handle and i-PAL electronic lock
Unit Height
EIA Mtg. Units
47U
42U
27U
47U
42U
27U
Part Number
AH_D476BAS _
AH_D426BAS _
AH_D276BAS _
AH_D478BAS _
AH_D428BAS _
AH_D278BAS _
Width
Shipping Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
(600)
(600)
(600)
30.8
28.0
19.2
33.9
30.8
21.6
(14.0)
(12.7)
(8.7)
(800)
(800)
(800)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
51
(15.4)
(14.0)
(9.8)
Sample code for a
left hand hinged
42U x 31.5” (800mm)
wide assembly with
standard locking –
finished Black with
Black trim is
AHFD428BAS
Component Assembly Specification & Part Numbers
Access Vented Steel Door
The standard Access Cabinet Vented Steel Door has been designed to incorporate a vent pattern offering an 80%
free area configuration. These doors provide the optimum solutions when configuring cabinets to meet the
conventional cooling needs of low to medium density cooling applications. The percentage free area of the door
is critical as the active equipment performance can be adversely affected if the flow of the cold air feed to the unit
as well as the hot air exhaust are compromised.
Features include;
• Color coded hardware incorporating quick release hinge mechanisms
• Doors can be supplied left hand (AVSD series) or right hand (AWSD series) hinged
• Supplied with two point locking espan assembly latching into the cabinet frame top and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro
Unit Height
Part Number
Width
Shipping Wt.
profile inserts, mechanical combination swing
in.
(mm)
lbs.
(kg)
EIA Mtg. Units
handle and i-PAL electronic lock
47U
A_D476BAS _ 23.6” (600) 37.0 (16.8)
42U
39U
27U
22U
47U
42U
39U
27U
22U
Sample code for a left hand
hinged 42U x 23.6” (600mm)
wide assembly with
standard locking – finished
Black with Black trim is
AVSD426BAS
A_D426BAS _
A_D396BAS _
A_D276BAS _
A_D226BAS _
A_D478BAS _
A_D428BAS _
A_D398BAS _
A_D278BAS _
A_D228BAS _
23.6”
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
31.5”
31.5”
(600)
(600)
(600)
(600)
(800)
(800)
(800)
(800)
(800)
33.0
30.6
21.4
17.4
49.4
44.1
41.0
28.4
23.1
(15.0)
(13.9)
(9.7)
(7.9)
(22.4)
(20.0)
(18.6)
(12.9)
(10.5)
Access Wardrobe Style Double Vented Steel Doors
The Access Cabinet Wardrobe Style Double Vented Steel Door assembly is made up of two half-width vented
steel door sections incorporating an 80% free area mesh pattern. The percentage free area of the door is critical
when active equipment is deployed into the cabinet as the equipment performance can be adversely affected if
the flow of the cold air feed to the unit as well as the hot air exhaust are compromised. The assembly is
configured so the left hand door section is trapped by the locking right hand door section. The wardrobe style
door configuration is ideal for applications with limited space around the periphery of the cabinet.
Features include;
• Color coded hardware incorporating quick release hinge mechanisms
• Right hand door section traps the left hand door section as standard
• Supplied with two point locking espan assembly latching into the cabinet frame top
and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro profile inserts, mechanical
combination swing handle and i-PAL electronic lock
Unit Height
Part Number
EIA Mtg. Units
47U
42U
39U
47U
42U
39U
AZD476B
AZD426B
AZD396B
AZD478B
AZD428B
AZD398B
_
_
_
_
_
_
Width
Shipping Wt.
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
(600)
(600)
(600)
37.9
33.9
31.5
50.5
45.2
41.9
(17.2)
(15.4)
(14.3)
(800)
(800)
(800)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
52
(22.9)
(20.5)
(19.0)
Sample code for a
left hand hinged
42U x 31.5” (800mm)
wide assembly
with standard locking –
finished Black with
Black trim is
AZD428B
Component Assembly Specification & Part Numbers
Access Standard Plain Steel Door
The standard Access Cabinet Plain Steel Door is a single piece solid steel door incorporating the standard quick
release hinge and two point swing handle locking used on all the full width Access Cabinet doors. The handles
and the hinge hardware are all color coded and available in range of standard colors.
Features include;
• Color coded hardware incorporating quick release hinge mechanisms
• Doors can be supplied left hand (ASD series) or right hand (ATD series) hinged
• Supplied with two point locking espan assembly latching into the cabinet frame top and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro
profile inserts, mechanical combination swing
Unit Height
Part Number
Width
handle and i-PAL electronic lock
EIA Mtg. Units
47U
42U
39U
27U
22U
47U
42U
39U
27U
22U
Sample code for a left hand
hinged 42U x 23.6” (600mm)
wide assembly with
standard locking – finished
Black with Black trim is
ASD426BAS
A_D476BAS _
A_D426BAS _
A_D396BAS _
A_D276BAS _
A_D226BAS _
A_D478BAS _
A_D428BAS _
A_D398BAS _
A_D278BAS _
A_D228BAS _
Shipping Wt.
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
31.5”
31.5”
(600)
(600)
(600)
(600)
(600)
37.5
33.5
31.1
21.6
17.6
50.0
44.7
41.4
28.6
23.3
(17.0)
(15.2)
(14.1)
(9.8)
(8.0)
(800)
(800)
(800)
(800)
(800)
(22.7)
(20.3)
(18.8)
(13.0)
(10.6)
Access Wardrobe Double Steel Door
The standard Access Cabinet Double Plain Steel Doors are ideal for applications with limited walkway space.
Features include;
• Color coded hardware incorporating quick release hinge mechanisms
• Supplied with two point locking espan assembly latching into the cabinet frame top and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro
profile inserts, mechanical combination swing
handle and i-PAL electronic lock
Unit Height
Part Number
Width
EIA Mtg. Units
47U
42U
39U
47U
42U
39U
Sample code for a left hand
hinged 42U x 23.6” (600mm)
wide assembly with
standard locking – finished
Black with Black trim is
ADSD426BAS
ADSD476BAS _
ADSD426BAS _
ADSD396BAS _
ADSD478BAS _
ADSD428BAS _
ADSD398BAS _
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
53
Shipping Wt.
in.
(mm)
lbs.
(kg)
23.6”
23.6”
23.6”
31.5”
31.5”
31.5”
(600)
37.0
33.0
30.6
49.4
44.1
41.0
(16.8)
(600)
(600)
(800)
(800)
(800)
(15.0)
(13.9)
(22.4)
(20.0)
(18.6)
Component Assembly Specification & Part Numbers
Access Pressurized Rear Doors
Designed to mount on the rear of the cabinet, these doors have been developed to enhance the thermal
characteristics of the cabinet by efficiently and effectively expelling hot air generated within the cabinet. Comprising
of four main elements the door configuration can be tailored to meet the demands of individual installation thanks to
the flexible design.
Outwardly the door assembly looks like a standard 80% free area vented steel door, in fact it utilizes the same
hinge and locking hardware found on our standard doors. As a consequence these doors can be retro fitted to
existing cabinets deployed in the field and be hung either left or right hand hinged as required. Where the
pressurized door differs from the standard vented door is the addition of a frame on the rear of the door which forms
an enclosed plenum when enclosed with blanking panels or fans trays (see options).
Features include;
• Fully configurable plenum chamber
• Integrated vertical cable manager
• Doors can be configured as either left hand (AVPD series) or right hand (AVRD series)
hinged
• Supplied with two point locking espan assembly latching into the cabinet frame top
and bottom
• Fitted with keyed swing handle as standard
• Other locking options available including: Euro profile inserts, mechanical
combination swing handle and i-PAL electronic lock
Unit Height
EIA Mtg. Units
47U
42U
47U
42U
Part Number
A__D476B
A__D426B
A__D478B
A__D428B
_
_
_
_
Width
Shipping Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
31.5”
31.5”
(600)
(600)
54.4
49.4
67.0
60.4
(24.7)
(22.4)
(800)
(800)
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
54
(30.3)
(27.4)
Sample code for a left
hand hinged 42U x
31.5” (800mm) wide
assembly with
standard locking –
finished Black with
Black trim is
AVPD428B
Component Assembly Specification & Part Numbers
Pressurized Rear Door Fan Tray Assembly
Although not 19-inch compliant, the fan trays themselves are 3U in height and are fitted with two 4.7” (120mm)
square fans each rated at 79 CFM. Utilizing quick fit tool-less quarter turn fasteners these fan trays can be
easily positioned to allow the tailored management of “hot spot” conditions.
Power cord to be ordered separately.
Voltage
Part Number
230v A/C
110v A/C
230v A/C
110v A/C
A6PD3U220FTA
A6PD3U110FTA
A8PD3U220FTA
A8PD3U110FTA
230v A/C
110v A/C
230v A/C
110v A/C
A6PD3U220FTB
A6PD3U110FTB
A8PD3U220FTB
A8PD3U110FTB
Finish
Lt.
Lt.
Lt.
Lt.
Gray
Gray
Gray
Gray
Black
Black
Black
Black
Width
Shipping Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
31.5”
31.5”
(600)
(600)
3.6
3.6
4.3
4.3
(1.6)
(1.6)
23.6”
23.6”
31.5”
31.5”
(600)
(600)
3.6
3.6
4.3
4.3
(1.6)
(1.6)
(800)
(800)
(800)
(800)
(1.9)
(1.9)
(1.9)
(1.9)
Pressurized Rear Door Blanking Panel Options
Like the fan trays, the blanking panels are not 19-inch compliant but are available in 1U or 2U height options.
Used in conjunction with the fan trays, the blanking panels can be used to seal off any unused opening in the door
plenum, preventing the hot air being drawn out of the back of the cabinet by the fans from re-entering or
recirculating in the rear of the cabinet. The panels utilize quick fit tool-less quarter turn fasteners for quick and easy
installation.
Size
Part Number
1U
2U
1U
2U
A6PDBP1UA
A6PDBP2UA
A8PDBP1UA
A8PDBP2UA
1U
2U
1U
2U
A6PDBP1UB
A6PDBP2UB
A8PDBP1UB
A8PDBP2UB
Finish
Lt.
Lt.
Lt.
Lt.
Black
Black
Black
Black
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
55
Gray
Gray
Gray
Gray
Width
Shipping Weight
in.
(mm)
lbs.
(kg)
23.6”
23.6”
31.5”
31.5”
(600)
(600)
0.8
1.3
1.0
1.7
(0.36)
(0.59)
23.6”
23.6”
31.5”
31.5”
(600)
(600)
0.8
1.3
1.0
1.7
(0.36)
(0.59)
(800)
(800)
(800)
(800)
(0.45)
(0.77)
(0.45)
(0.77)
Component Assembly Specification & Part Numbers
Shelf Options
Fix directly between front/rear 19-inch mounting angles providing additional
support to 19-inch mounted units. Particularly useful when deploying cantilever
mounted equipment of any depth.
Finish: Painted standard silver.
Load Rating: 77 Lbs. (35kg)
Chassis Support
Part
Number
CR39
CR45
CR58
CR62
Description
Chassis
Chassis
Chassis
Chassis
runners
runners
runners
runners
Cabinet Depth
(2off)
(2off)
(2off)
(2off)
in.
(mm)
15.0”
17.5”
22.5”
24.7”
(380)
(444)
(571)
(627)
Cantilever Shelf
15”
(381mm)
Designed to support small monitors, desktop hubs and switches.
Installs in 2U.
Load Rating: 60 Lbs. (27.2kg)
Part Number
Min. Cabinet Depth
E2SHCLSLP1915P__
171/2”
(444mm)
Weight
Fits all Cabinet Depths
lbs.
(kg)
5.0
(2.20)
__ Color Scheme Options
A = Light Gray
B = Black
Keyboard Shelves
Sliding and tilting shelves designed to support 19” (482mm) keyboards.
Shelf installs in 2U.
Load Rating: 20 lbs. (9.1kg)
Part Number
EIA Mounting
Width
E2SHKBS19__
E2SHKBS23__
L
L
Weight
in.
in.
(mm)
lbs.
(kg)
19”
23”
16.4”
20.4”
(416)
10.0
11.0
(4.5)
(517)
(5.0)
__ Color Scheme Options
Keyboard Shelf with Mouse Tray
A = Light Gray
B = Black
These sliding and tilting shelves are designed to support keyboards
and features an articulating mouse tray.
Shelf installs in 2U.
Load Rating: 20 lbs. (9.1kg).
Part Number
L
EIA Mounting
Width
E2SHKBSLPM19__
E2SHKBSLPM23__
56
Weight
in.
in.
(mm)
lbs.
(kg)
19”
23”
16.4”
20.4”
(416)
11.2
12.2
(5.1)
__ Color Scheme Options
A = Light Gray
B = Black
L
(517)
(5.6)
Component Assembly Specification & Part Numbers
Shelf Options
Sliding/Swivel Keyboard & Monitor Shelf
This Sliding/Swivel Keyboard and Monitor Shelf is designed to
support large main frame type keyboards and CRT monitors.
Shelf installs in 2U.
Load Rating: 200 lbs. (90.7kg).
Part Number
EIA Mounting
Width
in.
Nominal Shelf
Depth
in.
Nominal
Shelf Depth
187/8”
Weight
(479mm)
(mm)
lbs.
(kg)
153/4”
(400mm)
19”
19”
19”
E2SHKBS2U1921__
E2SHKBS2U1924__
E2SHKBS2U1930__
21.0”
24.0”
30.0”
(533)
(609)
(762)
34.5
36.7
41.5
(15.6)
(16.6)
(18.8)
__ Color Scheme Options
A = Light Gray
B = Black
Sliding/Swivel Keyboard
This Sliding/Swivel Keyboard Shelf is designed to support main frame
type keyboards.
Shelf installs in 1U.
Load Rating: 50 lbs. (22.7kg).
Nominal
Shelf Depth
187/8”
Part Number
EIA Mounting
Width
E2SHKBSR1U1921__
E2SHKBSR1U1924__
E2SHKBSR1U1930__
Nominal Shelf
Depth
(479mm)
Weight
in.
in.
(mm)
lbs.
(kg)
19”
19”
19”
21.0”
24.0”
30.0”
(533)
28.8
30.4
33.7
(13.0)
(609)
(762)
__ Color Scheme Options
A = Light Gray
B = Black
57
(13.8)
(15.3)
153/4”
(400mm)
Component Assembly Specification & Part Numbers
Shelf Options
Fixed & Sliding Shelves
Access cabinet Fixed and Sliding Shelves feature a flow-through perforated design for maximum
equipment ventilation. All Fixed and Sliding Shelves feature adjustable shelf mounting brackets that can
adapt to all rail depths. Sliding Shelves can be fully extended for easy access to equipment.
Shelves are manufactured from 14 gauge (2.0mm) steel.
Minimum
Cabinet
Depth
Part Number
Load Rating
350 lbs. (159kg)
Load Rating
150 lbs. (68kg)
Fixed Shelves
__ Color Scheme Options
A = Light Gray
B = Black
Load Rating
350 lbs. (159kg)
Load Rating
150 lbs. (68kg)
Sliding Shelves
E2SH4P1920__
E2SH4P1924__
E2SH4P1930__
E2SH4P1936__
E2SH4P1942__
E2SH4P2320__
E2SH4P2324__
E2SH4P2330__
E2SH4P2336__
E2SH4P2342__
E2SHH4P1920__
E2SHH4P1924__
E2SHH4P1930__
E2SHH4P1936__
E2SHH4P1942__
E2SHH4P2320__
E2SHH4P2324__
E2SHH4P2330__
E2SHH4P2336__
E2SHH4P2342__
E2SHSS1920__
E2SHSS1924__
E2SHSS1930__
E2SHSS1936__
E2SHSS1942__
E2SHSS2320__
E2SHSS2324__
E2SHSS2330__
E2SHSS2336__
E2SHSS2342__
E2SHHSS1920__
E2SHHSS1924__
E2SHHSS1930__
E2SHHSS1936__
E2SHHSS1942__
E2SHHSS2320__
E2SHHSS2324__
E2SHHSS2330__
E2SHHSS2336__
E2SHHSS2342__
58
Maximum
Rail
Adjustment
Shipping
Weight
in.
(mm)
in.
(mm)
lbs.
(kg)
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
26.6
36.0
36.0
37.4
47.2
(675)
(915)
(915)
(1000)
(1200)
24.5
28.5
34.5
40.5
46.5
24.5
28.5
34.5
40.5
46.5
24.5
28.5
34.5
40.5
46.5
24.5
28.5
34.5
40.5
46.5
18.0
22.0
28.0
28.0
28.0
18.0
22.0
28.0
28.0
28.0
18.0
22.0
28.0
28.0
28.0
18.0
22.0
28.0
28.0
28.0
(622)
(724)
(876)
(1028)
(1181)
12.0
14.4
18.0
21.6
25.2
13.0
15.6
19.5
23.4
27.3
14.0
16.8
21.0
25.2
29.4
14.8
17.8
22.2
26.6
31.1
13.6
16.3
20.4
24.5
28.6
14.4
17.3
21.6
25.9
30.2
15.6
18.7
23.4
28.1
32.8
16.8
18.7
25.2
30.2
35.3
(5.4)
(6.5)
(8.2)
(9.8)
(11.4)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(675)
(915)
(915)
(1000)
(1200)
(622)
(724)
(876)
(1028)
(1181)
(622)
(724)
(876)
(1028)
(1181)
(622)
(724)
(876)
(1028)
(1181)
(457)
(558)
(711)
(711)
(711)
(457)
(558)
(711)
(711)
(711)
(457)
(558)
(711)
(711)
(711)
(457)
(558)
(711)
(711)
(711)
(5.9)
(7.1)
(8.8)
(10.6)
(12.4)
(6.4)
(7.6)
(9.5)
(11.4)
(13.3)
(6.7)
(8.1)
(10.1)
(12.1)
(14.1)
(6.2)
(7.4)
(9.3)
(11.1)
(13.0)
(6.5)
(7.8)
(9.8)
(11.7)
(13.7)
(7.1)
(8.5)
(10.6)
(12.7)
(14.9)
(7.6)
(9.2)
(11.4)
(13.7)
(16.0)
Component Assembly Specification & Part Numbers
Shelf Options
Universal Quick Fit Fixed Shelf
The Universal Quick Fit Fixed Shelves are designed to
provide maximum versatility and can be installed or
relocated within the Access cabinet quickly without the
use of tools. Shelves are fully ventilated and designed to
install on front and rear 19” or 23” EIA square hole
mounting rails.
Load Rating: 75 lbs. (34.0kg).
Part Number
EIA
Mounting
Width
Rail Spacing
Front to Rear
Min.-Max.
in.
in.
(mm)
in.
(mm)
lbs.
(kg)
QRSV 45__
QRSV 65__
QRSV 75__
QRSV23 45__
QRSV23 65__
QRSV23 75__
19”
19”
19”
23”
23”
23”
11.7 - 17.7
17.7 - 25.6
21.6 - 29.5
11.7 - 17.7
17.7 - 25.6
21.6 - 29.5
(300-450)
17.5
25.5
29.5
17.5
25.5
29.5
(450)
11.0
14.7
17.2
13.1
16.3
19.6
(5.0)
Shelf
Depth
(450-650)
(550-750)
(300-450)
(450-650)
(550-750)
(650)
(750)
(450)
(650)
(750)
Shipping
Weight
__ Color Scheme Options
A = Light Gray
B = Black
Snap-in shelf support bracket
Slide shelf into position and
twist cam to lock
59
(6.6)
(7.8)
(5.9)
(7.4)
(8.9)
Component Assembly Specification & Part Numbers
Shelf Options
Universal Quick Fit Sliding Shelf
The Universal Quick Fit Sliding Shelf is easy to install and
provides quick access to your equipment. This shelf is fully
ventilated and designed to install on front and rear 19” or 23”
EIA square hole mounting rails.
Each shelf has a load capacity of 275 lbs. (125kg).
Shelf - Extended
Part Number
EIA
Mounting
Width
Rail Spacing
Front to Rear
Min.-Max.
in.
QRTSV 45 _
QRTSV 65 _
QRTSV 75 _
QRTSV23 45 _
QRTSV23 65 _
QRTSV23 75 _
in.
19
19
19
141/4
23
23
23
141/4
203/16
203/16 - 261/8
261/8 - 32
203/16
203/16 - 261/8
261/8 - 32
Shelf
Depth
Shipping
Weight
(mm)
in.
(mm)
lbs.
(kg)
(363-513)
171/2
(450)
(650)
(663-812)
251/2
291/2
13.4
16.1
20.2
(6.2)
(513-663)
(363-513)
171/2
(450)
251/2
291/2
(650)
14.2
17.1
21.3
(6.5)
(513-663)
(663-812)
(750)
(750)
(7.4)
(9.2)
(7.8)
(9.8)
__ Color Scheme Options
A = Light Gray
B = Black
Snaps into mounting rail and secures with screw
Front to rear adjustment
60
Component Assembly Specification & Part Numbers
Shelf Options
New from Cooper B-Line are a range of two 1U high 19-inch mounted fixed
adjustable depth shelves. Designed to mount into any EIA 310-E / IEC 297
compliant cabinet, these shelves are adjustable in depth to suit mounting angle
centers set at between 18” (450mm) & 30” (760mm).
Universal Fixed
Adjustable
Depth Shelf
Available in either a standard duty or heavy duty construction, the shelves have
been designed and tested to provide static load ratings of 220 lbs. (100kg) and
550 lbs. (250kg) respectively (based on a an evenly distributed load).
Easy to use, each shelf comes with full assembly and installation instructions.
Installation is as simple as;
• Install cage nuts in the appropriate positions in the front and rear 19-inch rails
• Adjust the shelf depth as appropriate and lightly fasten the inner shelf retaining
screws
• Screw the shelf to the front and rear 19-inch rails
• Tighten up the inner shelf retaining screws as appropriate. Retaining screws
locations are provided on the top surface of the shelf for easy access. If the
top surface fixing points are inconvenient then alternative side fixing locations
are provided
Part Number
Description
Mounting Depth Range
Min
Standard Duty Fixed Adjustable
Depth Shelf 1U x 17.7” (450mm) Deep
Heavy Duty Fixed Adjustable
HDFAS1U45B
Depth Shelf 1U x 17.7” (450mm) Deep
Heavy Duty Fixed Adjustable
HDFAS1U65B
Depth Shelf 1U x 26.6” (650mm) Deep
Full Width Heavy Duty Fixed Adjustable
HDFAFWS1U45B Depth Shelf 1U x 17.7” (450mm) Deep
Suits 31.5” (800mm) Wide Cabinets Only
Full Width Heavy Duty Fixed Adjustable
HDFAFWS1U65B Depth Shelf 1U x 26.6” (650mm) Deep
Suits 31.5” (800mm) Wide Cabinets Only
SDFAS1U45B
Unit Weight
Load Rating *
Max
lbs.
(kg)
lbs.
(kg)
17.7”
29.9”
(450mm)
(760mm)
11.0
(5.0)
220
(100)
15.4
(7.0)
550
(250)
22.2
(10.1)
550
(250)
20.5
(9.3)
550
(250)
29.6
(13.5)
550
(250)
17.7”
29.9”
(450mm)
(760mm)
26.6”
37.8”
(650mm)
(960mm)
17.7”
29.9”
(450mm)
(760mm)
26.6”
37.8”
(650mm)
(960mm)
* - Assumes the load is evenly distributed
29.9” (760mm) for 45 Series
37.8” (960mm) for 65 Series
17.7” (450mm) for 45 Series
26.6” (650mm) for 65 Series
17”
(434mm)
61
Component Assembly Specification & Part Numbers
Shelf Options
IMP Rails
Vertical mid section IMP Rails are used in conjunction with the
Mid-Shelf Bracket Kit to provide Fixed Shelves with six point loading
capability.
Finish: Painted Standard silver.
Part Number
IMP27
IMP32
IMP39
IMP42
IMP47
Mounting
Spaces ‘U’
27
32
39
42
47
Height
Weight
in.
(mm)
lbs.
(kg)
47.6”
56.3”
68.6”
73.8”
82.6”
(1208)
28.6
30.3
22.0
28.9
31.1
(13.1)
(1430)
(1741)
(1875)
(2097)
(13.9)
(10.1)
(13.2)
(14.3)
Mid-Shelf Bracket Kit (For Shelf Support)
Access Mid-Shelf Brackets are used in conjunction with Fixed Shelves
(see page 58) and IMP Rails (shown above) to provide six point loading
with long shelves and deep rail spacing, or four point loading for short
shelves installed in deep cabinets.
Each Mid-Shelf Bracket Kit includes two (2) brackets and mounting
hardware.
Standard finish is clear zinc.
Part Number
AMSB
62
Description
Mid-Shelf Bracket Kit
Weight
lbs.
(kg)
1.0
(0.45)
Component Assembly Specification & Part Numbers
Shelf Options
Rack Mount Fan Shelf (500cfm) dBA=48
These Rack Mount Fan Shelves are typically located in the bottom
or middle of the cabinet to help pull cool air from floor.
Fan unit is rated at 110 volt, 60 hz, 0.37 FLA
Cord Length: 6 ft. (1.8m) grounded
Installs in 3U
Part Number
Width x Depth
in.
E2FA1920500AC__
E2FA1924500AC__
E2FA1930500AC__
E2FA2320500AC__
E2FA2324500AC__
E2FA2330500AC__
19.0”
19.0”
19.0”
23.0”
23.0”
23.0”
x
x
x
x
x
x
20.0”
24.0”
30.0”
20.0”
24.0”
30.0”
Weight
(mm)
lbs.
(kg)
(482 x 508)
19.0
21.4
25.0
20.0
22.6
26.5
(8.7)
(482 x 609)
(482 x 762)
(584 x 508)
(584 x 609)
(584 x 762)
(9.8)
(11.5)
(9.1)
(10.3)
(12.1)
__ Color Scheme Options
A = Light Gray
B = Black
Rack Mount Fan Shelf (315cfm) dBA=53
These Rack Mount Fan Shelves, with a three (3) fan unit, are
typically located in the bottom or middle of the cabinet to help pull
cool air from floor.
Three fan unit is rated at 110 volt, 60 hz, 0.54 FLA
Cord Length: 6 ft. (1.8m) grounded
Installs in 2U
Part Number
Width x Depth
in.
E2FA1920315AC__
E2FA1924315AC__
E2FA1930315AC__
E2FA2320315AC__
E2FA2324315AC__
E2FA2330315AC__
19.0”
19.0”
19.0”
23.0”
23.0”
23.0”
x
x
x
x
x
x
20.0”
24.0”
30.0”
20.0”
24.0”
30.0”
Weight
(mm)
lbs.
(kg)
(482 x 508)
16.5
18.9
22.5
17.5
20.1
24.0
(7.6)
(482 x 609)
(482 x 762)
(584 x 508)
(584 x 609)
(584 x 762)
__ Color Scheme Options
A = Light Gray
B = Black
63
(8.7)
(10.3)
(8.0)
(9.2)
(11.0)
Component Assembly Specification & Part Numbers
Shelving Compatibility Matrix for Access
✔ = Will fit, recommended
Part Number
Finish
Description
✔ = Will fit
■ = Will fit, NOT recommended
Mounting Config.
X = Will NOT fit
Shelf Depth
Cabinet Width
Cabinet Depth
23.6" 31.5" 26.6" 36.0" 39.4" 47.2"
In.
(mm)
(600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm)
15.0
17.5
22.5
24.7
(380)
(444)
(571)
(627)
Load Rating
lbs
(kg)
77.0
77.0
77.0
77.0
(35.0)
(35.0)
(35.0)
(35.0)
Chassis Runners - 77lbs (35kg) Load Rating (Uniform Load)
CR39
CR45
CR58
CR62
Silver
Silver
Silver
Silver
Part Number
Gray Finish
Chassis Runners (pair)
Chassis Runners (pair)
Chassis Runners (pair)
Chassis Runners (pair)
Description
Side Rail Fixing
Side Rail Fixing
Side Rail Fixing
Side Rail Fixing
Mounting Config.
Black Finish
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
Shelf Depth
Cabinet Width
Cabinet Depth
23.6" 31.5" 26.6" 36.0" 39.4" 47.2"
In.
(600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm)
(mm)
Load Rating
lbs
(kg)
Vented Cantilever Shelves - 60lbs (27.3kg) Load Rating (Uniform Load)
E2SHCLSP1915PA E2SHCLSP1915PB
2U Mounting Units
19-Inch Fixing 15.0
Sliding Keyboard Cantilever Shelves - 20lbs (9.1kg) Load Rating (Uniform Load)
E2SHKBS19A
E2SHKBS19B
2U Mounting Units
19-Inch Fixing
E2SHKBS23A
E2SHKBS23B
2U Mounting Units
23-Inch Fixing
Sliding Keyboard & Mouse Cantilever Shelves - 20lbs (9.1kg) Load Rating (Uniform Load)
E2SHKBSLPM19A E2SHKBSLPM19B
2U Mounting Units
19-Inch Fixing
E2SHKBSLPM23A E2SHKBSLPM23B
2U Mounting Units
23-Inch Fixing
Sliding / Swivel Keyboard & Monitor Shelves - 200lbs (90.9kg) Load Rating (Uniform Load)
E2SHKBSR2U1921A E2SHKBSR2U1921B
2U Mounting Units
19-Inch Fixing 21.0
E2SHKBSR2U1924A E2SHKBSR2U1924B
2U Mounting Units
19-Inch Fixing 24.0
E2SHKBSR2U1930A E2SHKBSR2U1930B
2U Mounting Units
19-Inch Fixing 30.0
Sliding / Swivel Keyboard Shelves - 50lbs (22.7kg) Load Rating (Uniform Load)
E2SHKBSR1U1921A E2SHKBSR1U1921B
1U Mounting Unit
19-Inch Fixing 21.0
E2SHKBSR1U1924A E2SHKBSR1U1924B
1U Mounting Unit
19-Inch Fixing 24.0
E2SHKBSR1U1930A E2SHKBSR1U1930B
1U Mounting Unit
19-Inch Fixing 30.0
Universal Quick Fit Fixed Shelves -77lbs (35.0kg) Load Rating (Uniform Load)
QRSV45A
QRSV45B
1U Mounting Unit
Side Rail Fixing 17.7
QRSV65A
QRSV65B
1U Mounting Unit
Side Rail Fixing 25.6
QRSV75A
QRSV75B
1U Mounting Unit
Side Rail Fixing 29.5
Standard Duty Vented Fixed Shelves - 150lbs (68.2kg) Load Rating (Uniform Load)
E2SH4P1920A
E2SH4P1920B
1U Mounting Unit
19-Inch Fixing
20.0
E2SH4P1924A
E2SH4P1924B
1U Mounting Unit
19-Inch Fixing
24.0
E2SH4P1930A
E2SH4P1930B
1U Mounting Unit
19-Inch Fixing
30.0
E2SH4P1936A
E2SH4P1936B
1U Mounting Unit
19-Inch Fixing
36.0
E2SH4P1942A
E2SH4P1942B
1U Mounting Unit
19-Inch Fixing
42.0
E2SH4P2320A
E2SH4P2320B
1U Mounting Unit
23-Inch Fixing
20.0
E2SH4P2324A
E2SH4P2324B
1U Mounting Unit
23-Inch Fixing
24.0
E2SH4P2330A
E2SH4P2330B
1U Mounting Unit
23-Inch Fixing
30.0
E2SH4P2336A
E2SH4P2336B
1U Mounting Unit
23-Inch Fixing
36.0
E2SH4P2342A
E2SH4P2342B
1U Mounting Unit
23-Inch Fixing
42.0
Heavy Duty Vented Fixed Shelves - 350lbs (159.1kg) Load Rating (Uniform Load)
E2SHH4P1920A E2SHH4P1920B
1U Mounting Unit
19-Inch Fixing 20.0
E2SHH4P1924A E2SHH4P1924B
1U Mounting Unit
19-Inch Fixing 24.0
E2SHH4P1930A E2SHH4P1930B
1U Mounting Unit
19-Inch Fixing 30.0
E2SHH4P1936A E2SHH4P1936B
1U Mounting Unit
19-Inch Fixing 36.0
E2SHH4P1942A E2SHH4P1942B
1U Mounting Unit
19-Inch Fixing 42.0
E2SHH4P2320A E2SHH4P2320B
1U Mounting Unit
23-Inch Fixing 20.0
E2SHH4P2324A E2SHH4P2324B
1U Mounting Unit
23-Inch Fixing 24.0
E2SHH4P2330A E2SHH4P2330B
1U Mounting Unit
23-Inch Fixing 30.0
E2SHH4P2336A E2SHH4P2336B
1U Mounting Unit
23-Inch Fixing 36.0
E2SHH4P2342A E2SHH4P2342B
1U Mounting Unit
23-Inch Fixing 42.0
64
-
-
✔
✔
✔
✔
60.0
(27.3)
-
-
✔
✔
✔
✔
✔
✔
✔
✔
20.0
20.0
(9.1)
(9.1)
-
-
✔
✔
✔
✔
✔
✔
✔
✔
20.0
20.0
(9.1)
(9.1)
(533)
(610)
(762)
-
-
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
200.0 (90.9)
200.0 (90.9)
200.0 (90.9)
(533)
(610)
(762)
-
-
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
50.0
50.0
50.0
(22.7)
(22.7)
(22.7)
(450)
(650)
(750)
-
-
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
77.0
77.0
77.0
(35.0)
(35.0)
(35.0)
(508)
(610)
(762)
(914)
(1067)
(508)
(610)
(762)
(914)
(1067)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(508)
(610)
(762)
(914)
(1067)
(508)
(610)
(762)
(914)
(1067)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
350.0
350.0
350.0
350.0
350.0
350.0
350.0
350.0
350.0
350.0
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(159.1)
(380)
Component Assembly Specification & Part Numbers
Shelving Compatibility Matrix for Access
✔ = Will fit, recommended
Part Number
Gray Finish
✔ = Will fit
Description
■ = Will fit, NOT recommended
Mounting Config.
Black Finish
X = Will NOT fit
Shelf Depth
Cabinet Width
Cabinet Depth
23.6" 31.5" 26.6" 36.0" 39.4" 47.2"
In.
(600mm) (800mm) (675mm) (915mm) (1000mm)(1200mm)
(mm)
Heavy Duty Vented Fixed Adjustable Depth Shelves - 220lbs (100.0kg) Load Rating (Uniform Load)
- SDFAS1U45B1U Mounting Unit - 17.7" - 29.9" 19-Inch Fixing
17.7
(450)
-
-
Load Rating
lbs
✔
✔
✔
✔
220.0 (100.0)
✔
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
550.0
✔
✔
✔
(250.0)
Extra Heavy Duty Vented Fixed Adjustable Depth Shelves - 550lbs (250.0kg) Load Rating (Uniform Load)
17.7
HDFAS1U45B 1U Mounting Unit - 17.7" - 29.9" 19-Inch Fixing
HDFAS1U65B 1U Mounting Unit - 25.6" - 37.8" 19-Inch Fixing
HDFWFAS1U45B 1U Mounting Unit - 17.7" - 29.9" Full Width Fixing
HDFWFAS1U65B 1U Mounting Unit - 25.6" - 37.8" Full Width Fixing
(kg)
-
(450)
-
25.6
17.7
25.6
(650)
(450)
(650)
-
20.0
24.0
30.0
36.0
42.0
20.0
24.0
30.0
36.0
42.0
(508)
(610)
(762)
(914)
(1067)
(508)
(610)
(762)
(914)
(1067)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
(68.2)
20.0
24.0
30.0
36.0
42.0
20.0
24.0
30.0
36.0
42.0
(508)
(610)
(762)
(914)
(1067)
(508)
(610)
(762)
(914)
(1067)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
200.0
200.0
200.0
200.0
200.0
200.0
200.0
200.0
200.0
200.0
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
(90.9)
17.7
25.6
29.5
17.7
25.6
29.5
(450)
(650)
(750)
(450)
(650)
(750)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
275.0
275.0
275.0
275.0
275.0
275.0
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
20.0
24.0
30.0
20.0
24.0
30.0
(508)
(610)
(762)
(508)
(610)
(762)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
275.0
275.0
275.0
275.0
275.0
275.0
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
20.0
24.0
30.0
20.0
24.0
30.0
(508)
(610)
(762)
(508)
(610)
(762)
-
-
✔
✔
-
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
275.0
275.0
275.0
275.0
275.0
275.0
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
(125.0)
550.0 (250.0)
550.0 (250.0)
550.0 (250.0)
Standard Duty Vented Sliding Shelves - 150lbs (68.2kg) Load Rating (Uniform Load)
E2SHSS1920A
E2SHSS1924A
E2SHSS1930A
E2SHSS1936A
E2SHSS1942A
E2SHSS2320A
E2SHSS2324A
E2SHSS2330A
E2SHSS2336A
E2SHSS2342A
E2SHSS1920B
E2SHSS1924B
E2SHSS1930B
E2SHSS1936B
E2SHSS1942B
E2SHSS2320B
E2SHSS2324B
E2SHSS2330B
E2SHSS2336B
E2SHSS2342B
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
Heavy Duty Vented Sliding Shelves - 200lbs (90.6kg) Load Rating (Uniform Load)
E2SHHSS1920A
E2SHHSS1924A
E2SHHSS1930A
E2SHHSS1936A
E2SHHSS1942A
E2SHHSS2320A
E2SHHSS2324A
E2SHHSS2330A
E2SHHSS2336A
E2SHHSS2342A
E2SHHSS1920B
E2SHHSS1924B
E2SHHSS1930B
E2SHHSS1936B
E2SHHSS1942B
E2SHHSS2320B
E2SHHSS2324B
E2SHHSS2330B
E2SHHSS2336B
E2SHHSS2342B
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
23-Inch Fixing
Extra Heavy Duty Sliding Shelves - 275lbs (125.0kg) Load Rating (Uniform Load)
QRTSV45A
QRTSV65A
QRTSV75A
QRTSVFW45A
QRTSVFW65A
QRTSVFW75A
QRTSV45B
QRTSV65B
QRTSV75B
QRTSVFW45B
QRTSVFW65B
QRTSVFW75B
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
1U Mounting Unit
19-Inch Fixing
19-Inch Fixing
19-Inch Fixing
Full Width Fixing
Full Width Fixing
Full Width Fixing
2U Rack Mounted Fan Shelf (315cfm) - 110V 60 Hz A/C (dBA = 53)
E2FA1920315ACA
E2FA1924315ACA
E2FA1930315ACA
E2FA2320315ACA
E2FA2324315ACA
E2FA2330315ACA
E2FA1920315ACB
E2FA1924315ACA
E2FA1930315ACA
E2FA2320315ACB
E2FA2324315ACA
E2FA2330315ACA
2U Mounting Unit (3 Fan)
2U Mounting Unit (3 Fan)
2U Mounting Unit (3 Fan)
2U Mounting Unit (3 Fan)
2U Mounting Unit (3 Fan)
2U Mounting Unit (3 Fan)
3U Rack Mounted Fan Shelf (500cfm) - 110V 60 Hz A/C (dBA = 48)
E2FA1920500ACA
E2FA1924500ACA
E2FA1930500ACA
E2FA2320500ACA
E2FA2324500ACA
E2FA2330500ACA
E2FA1920500ACB
E2FA1924500ACA
E2FA1930500ACA
E2FA2320500ACB
E2FA2324500ACA
E2FA2330500ACA
3U Mounting Unit (Single Fan)
3U Mounting Unit (Single Fan)
3U Mounting Unit (Single Fan)
3U Mounting Unit (Single Fan)
3U Mounting Unit (Single Fan)
3U Mounting Unit (Single Fan)
65
Component Assembly Specification & Part Numbers
Vertical Cable Management
The Access cabinet range offers a choice of solutions when it comes to vertical cable management within the
cabinet. With the corner-less design of the Access frame, it is possible to locate and install cable management
in locations not normally available with conventional four-post cabinet designs. The following pages provide and
overview to the solutions available.
Access Vertical Cable Tray
The Access cable tray provides full height cable management functionality including the ability to mount PDUs.
The cable tray attaches directly to the adjustable side-mount facility on the top and bottom Access frame. This
provides the capability to position the cable tray in almost any position within the cabinet front to rear. Available in
two width options, cable tray is supplied complete with all applicable hardware and mounting instructions.
Part Number
ACTR22
ACTR27
ACTR39
ACTR42
ACTR47
ACTRW22
ACTRW27
ACTRW39
ACTRW42
ACTRW47
Description
Access 22U Cable Tray – 3” (75mm) Wide
Access 27U Cable Tray – 3” (75mm) Wide
Access 39U Cable Tray – 3” (75mm) Wide
Access 42U Cable Tray – 3” (75mm) Wide
Access 47U Cable Tray – 3” (75mm) Wide
Access 22U Cable Tray – 6” (150mm) Wide
Access 27U Cable Tray – 6” (150mm) Wide
Access 39U Cable Tray – 6” (150mm) Wide
Access 42U Cable Tray – 6” (150mm) Wide
Access 47U Cable Tray – 6” (150mm) Wide
Finish: Painted standard silver
Access Flextray Vertical Cable Basket
The Access cable basket like the cable tray provides full height cable management functionality, but with the
added functionality that basket brings. The cable basket can be attached to the adjustable side-mount facility on
the top and bottom Access frame or bolted directly to the central vertical frame extrusions. Available in two width
options, the cable baskets are supplied complete with all applicable hardware and mounting instructions.
• Cable baskets are finished as standard zinc plate and trivalent passivate to BS EN 12329:2000
Part Number
ABS2215
ABS2715
ABS3915
ABS4215
ABS4715
ABS2230
ABS2730
ABS3930
ABS4230
ABS4730
66
Description
Access 22U Cable Basket – 6” (150mm) Wide
Access 27U Cable Basket – 6” (150mm) Wide
Access 39U Cable Basket – 6” (150mm) Wide
Access 42U Cable Basket – 6” (150mm) Wide
Access 47U Cable Basket – 6” (150mm) Wide
Access 22U Cable Basket – 12” (300mm) Wide
Access 27U Cable Basket – 12” (300mm) Wide
Access 39U Cable Basket – 12” (300mm) Wide
Access 42U Cable Basket – 12” (300mm) Wide
Access 47U Cable Basket – 12” (300mm) Wide
Component Assembly Specification & Part Numbers
Vertical Cable Management
Access Central Velcro Cable Tray & Basket Assemblies
For some applications, it is preferable to manage the incoming cabling centrally across the width of the cabinet.
The Access range offers the ability to configure the cabinet in this layout allowing cables to be brought up
centrally before being split and presented to either the front or rear 19-inch mounting facility. In addition to the
standard cable baskets detailed previously, a range of Velcro style cable trays are also available.
Details described below.
Part Number
Description
Finish
ACCSK06B
Access 24” (600mm) Wide Central Cable Support Kit
Black
ACCSK08B
Access 32” (800mm) Wide Central Cable Support Kit
Black
ACVT2230B
Access 27U Velcro Cable Tray – 11.8” (300mm) Wide
Black
ACVT3930B
Access 39U Velcro Cable Tray – 11.8” (300mm) Wide
Black
ACVT4230B
Access 42U Velcro Cable Tray – 11.8” (300mm) Wide
Black
ACVT4730B
Access 47U Velcro Cable Tray – 11.8” (300mm) Wide
Black
ACVT2240B
Access 27U Velcro Cable Tray – 15.8” (400mm) Wide
Black
ACVT3940B
Access 39U Velcro Cable Tray – 15.8” (400mm) Wide
Black
ACVT4240B
Access 42U Velcro Cable Tray – 15.8” (400mm) Wide
Black
ACVT4740B
Access 47U Velcro Cable Tray – 15.8” (400mm) Wide
Black
ACVT2260B
Access 27U Velcro Cable Tray – 23.6” (600mm) Wide
Black
ACVT3960B
Access 39U Velcro Cable Tray – 23.6” (600mm) Wide
Black
ACVT4260B
Access 42U Velcro Cable Tray – 23.6” (600mm) Wide
Black
ACVT4760B
Access 47U Velcro Cable Tray – 23.6” (600mm) Wide
Black
ACVT2280B
Access 27U Velcro Cable Tray – 31.5” (800mm) Wide
Black
ACVT3980B
Access 39U Velcro Cable Tray – 31.5” (800mm) Wide
Black
ACVT4280B
Access 42U Velcro Cable Tray – 31.5” (800mm) Wide
Black
ACVT4780B
Access 47U Velcro Cable Tray – 31.5” (800mm) Wide
Black
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
67
Component Assembly Specification & Part Numbers
Enhanced Vertical Cable Management
Designed to provide a fully flexible and configurable solution to
meet the demands of today’s high density in-cabinet cable
management, the new cable management system has been
designed specifically to complement the Access 31.5” (800mm)
wide cabinet platform in either single or ganged configurations.
Each vertical manager is fitted with two half height doors
incorporating snap on hinges which allow quick opening of the
doors from either side or complete removal.
The vertical cable managers include provision for cable tie offs
and supports in the form of cable tie lancers and multiple
mounting points for Access Cabinet twist & lock cable management
arms.
Adjustable depth front to rear cable troughs complement the
vertical managers. Designed to simply clip into the rear of the
vertical managers, the troughs can be positioned to span front to
rear at any or all of the four cable pass through positions provided
on each vertical cable manager.
• Material: Steel with UL 94V-O black plastic components.
• Finish: Black RAL 9005 epoxy polyester powder coat paint.
Vertical Manager - Single Cabinet Configurations & Part Numbers
Manager Width
Part Number
Ref.
Manager Approx.
To Suit Cabinet
Internal Section
Configuration
Unit
Height
in.
(mm)
(in2)
(mm2)
Single
Ganged
Offset
AVCMA39U100B
(A)
39U
3.91”
(99)
29.11”
(18,779)
✔
-
(C)*
AVCMA42U100B
(A)
42U
3.91”
(99)
29.11”
(18,779)
✔
-
(C)*
AVCMA47U100B
(A)
47U
3.91”
(99)
29.11”
(18,779)
✔
-
(C)*
AVCMA39U170B
(B)
39U
6.66”
(169)
52.00”
(33,549)
✔
-
(L or R)*
AVCMA42U170B
(B)
42U
6.66”
(169)
52.00”
(33,549)
✔
-
(L or R)*
AVCMA47U170B
(B)
47U
6.66”
(169)
52.00”
(33,549)
✔
-
(L or R)*
Mounting Rails
Offset Right
(B)
Mounting Rails
Offset Left
(B)
Mounting Rails
Fitted Centrally
(A)
(A)
Plan View On
Cabinet
*Key For Mounting Rail Offset
L = Offset Left
C = Center
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
68
Component Assembly Specification & Part Numbers
Enhanced Vertical Cable Management
Vertical Manager - Ganged Cabinet Configurations & Part Numbers
Manager Width
Part Number
Ref.
Manager Approx.
To Suit Cabinet
Internal Section
Configuration
Unit
Height
in.
(mm)
(in2)
(mm2)
Single
Ganged
Offset
AVCMA39U260B
(C)
39U
10.29”
(261)
80.13”
(51,695)
-
✔
(C,C)
AVCMA42U260B
(C)
42U
10.29”
(261)
80.13”
(51,695)
-
✔
(C,C)
AVCMA47U260B
(C)
47U
10.29”
(261)
80.13”
(51,695)
-
✔
(C.C)
AVCMA39U330B
(D)
39U
13.04”
(331)
103.02”
(66,465)
-
✔
(L,C/C,R)
AVCMA42U330B
(D)
42U
13.04”
(331)
103.02”
(66,465)
-
✔
(L,C/C,R)
AVCMA47U330B
(D)
47U
13.04”
(331)
103.02”
(66,465)
-
✔
(L,C/C,R)
AVCMA39U400B
(E)
39U
15.79”
(401)
125.91”
(81.235)
-
✔
(L,R)
AVCMA42U400B
(E)
42U
15.79”
(401)
125.91”
(81.235)
-
✔
(L,R)
AVCMA47U400B
(E)
47U
15.79”
(401)
125.91”
(81.235)
-
✔
(L,R)
(E)
(A)
(D)
(A)
(A)
(C)
*Key For Mounting Rail Offset
L = Offset Left
C = Center
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
69
Component Assembly Specification & Part Numbers
Enhanced Vertical Cable Management
Two Width Options
ACCT100*** = 3.90”
ACCT170*** = 6.65”
(100mm)
(170mm)
wide
wide
Adjustable depth for
easy mounting
Clip in lugs to
engage into vertical
cable channels front
& rear
2U Deep cable
trough assembly
Note:
(a) ACCT100*** variants will work with all vertical channel configurations assuming front & rear
mounting rails are configured identically.
(b) ACCT170*** variants can only be configured with vertical managers as per configuration
D & E. In configuration D the ACCT170*** unit can only be fitted in the cabinet where the
19-inch rails have been offset. Again front and rear rail positions need to be configured
identically.
Mounting Angle Configuration / Horizontal Cable Troughs Options
Minimum Mounting Rail Insert
Cabinet Depth
Cable Trough
Position Front & Rear
Configuration
Min Depth
Max Depth
in.
(mm)
in.
(mm)
in.
(mm)
in.
(mm)
26.6”
(675)
7.5”
(190)
N/A
N/A
N/A
N/A
34.5”
(875)
7.5”
(190)
10.25”
(260)
14.0”
(357)
36.0”
(915)
7.5”
(190)
10.25”
(260)
15.6”
(397)
39.4”
(1000)
7.5”
(190)
10.25”
(260)
19.0”
(482)
47.3”
(1200)
7.5”
(190)
10.25”
(260)
26.8”
(682)
70
Component Assembly Specification & Part Numbers
Vertical Cable Management
Metal Cable Hoops
E2MACMR3BLP Cable Guides
• Cable guides are designed to install directly on mounting rails for vertical
cable management
• Guide size is 4” (101mm) x 2” (51mm)
• Finish: Flat black powder coat
ACH6 Cable Hoop Features
• Designed to maximize cable management facilities within 23.6” (600mm) or
31.5” (800mm) wide cabinets
• Offers 2.0 in2 (1550mm2) of internal cable management space
• Fits directly onto Cooper B-Line’s Access 19-inch mounting angle ancillary
mounting positions
• Can be fitted every 1U if required
• Does NOT compromise your 19-inch mounting facility
ACH8 Cable Hoop Features
• Fits directly onto Cooper B-Line’s Access 19-inch mounting angle ancillary
mounting positions. (suitable for 31.5” (800mm) wide racks only)
• Offers 10.0 in2 (6500mm2) of internal cable management space
• Can be fitted every 1U if required
• Does NOT compromise your 19-inch mounting facility
• Offers simplified vertical cable management while still offering an open
architecture
• Hoop - 3/16” (5mm) diameter mild steel bar finished painted silver
CTM17 Flat Bar Cable Hoop Features
• Fits directly onto Cooper B-Line’s Access 19-inch mounting angle using
side twist & lock mounting positions. (suitable for 31.5” (800mm) wide
racks only)
• Does NOT compromise your 19-inch mounting facility (needs to be fitted
before mounting 19-inch equipment).
• Plate - 11 Ga. (3mm) thick flat mild steel - edges are rounded off
• Finish - Painted silver
71
Horizontal Cable Management Options
Horizontal Cable Organizers
Patch Cord Organizers
SB719_ _1
SB719_ _2L
Organize and provide strain relief for your horizontal and vertical
cable runs. Patch Cord Organizer panel and cable rings are
powder coated steel with Polyethylene wire saddles.
All mounting hardware is included.
Part Number
EIA Mounting
Width
Number of
Wire Saddles
Mounting Spaces
‘U’
SB719191_
SB719192L_
SB719231_
SB719232L_
19”
19”
23”
23”
24
24
24
24
1
2
1
2
Cable Trough Organizers
SB7171933C
Organizes cable when a constant cable bearing surface and
controlled bend radius are required. Organizers are powder
coated steel.
All mounting hardware is included.
Part Number
SB7171946C
SB7171933C_
SB7171946C_
SB7171946O_
EIA Mtg.
Width
19”
19”
19”
Inside
Depth
Inside
Height
in.
(mm)
in.
(mm)
3”
4”
4”
(76)
(101)
3”
61/2”
61/2”
(165)
(101)
(76)
(165)
Mtg Spaces
‘U’
2
4
4
SB7171946O
Horizontal Cable Organizers
Organizes horizontal cable runs. Cable Organizers are powder
coated steel.
All mounting hardware is included.
Part Number
SB719_ _2XL
SB719192XL_
SB719194XL_
SB719232XL_
SB719234XL_
EIA Mtg.
Width
19”
19”
23”
23”
Inside
Depth
in.
(mm)
in.
(mm)
31/2”
31/2”
31/2”
31/2”
(89)
3”
61/2”
3”
61/2”
(76)
__ Color Scheme Options
A = Light Gray
B = Black
72
Inside
Height
(89)
(89)
(89)
(165)
(76)
(165)
Mtg Spaces
‘U’
2
4
2
4
Horizontal Cable Management Options
RCM+ Horizontal Cable Managers
Part Number
SB87019S1FB*
SB87023S1FB*
SB87019S2FB*
SB87023S2FB*
SB87019S3FB*
SB87023S3FB*
Description
Finish
19-inch Cable Manager - 1U High
23-inch Cable Manager - 1U High
19-inch Cable Manager - 2U High
23-inch Cable Manager - 2U High
19-inch Cable Manager - 3U High
23-inch Cable Manager - 3U High
Aluminum with UL 94V-0 Black Plastic Components
Aluminum with UL 94V-0 Black Plastic Components
Aluminum with UL 94V-0 Black Plastic Components
Aluminum with UL 94V-0 Black Plastic Components
Aluminum with UL 94V-0 Black Plastic Components
Aluminum with UL 94V-0 Black Plastic Components
*All products with part numbers finishing FB = Flat Black Finish.
Cable Troughs
Front to Rear Cable Troughs
Designed to further enhance Cooper B-Line’s Access Cabinet System comes a range of front to rear cable trough
accessories. Offering versatile adjustment, these 2U high x 43/8” (110mm) wide trays provide unhindered front to
rear cable management, and include the provision for cable ties and wraps to be secured.
The cable troughs are suitable for mounting into 800mm wide Access cabinets, where they simply bolt onto the
side mount facility of the standard 19-inch rails. The design allows the trough to sit flush with the face of the
19-inch mounting angles, allowing front horizontal cable managers to be integrated, to provide a complete 360°
cable management solution at any given “U” level.
The troughs are available in a range of adjustable depth options to meet the needs of all Access cabinet depth
configurations. Each of the depth options has adjustment built in, allowing for the depth between the front and
rear 19-inch mounting angles to be adjusted, even when the trough has been cabled.
AFR2UCT-3B
AFR2UCT-1B
AFR2UCT-2B
AFR2UCT-4B
Technical Specifications
Material
Finish
Internal Dimensions
Part Number
AFR2UCT-1B
AFR2UCT-2B
AFR2UCT-3B
AFR2UCT-4B
Mild steel 18 Gauge (1.2mm) thick
Painted RAL9005 Black
43/8” (110mm) Wide x 33/8” (85mm) High
Description
Access Front to Rear 2U Cable
Trough - Option 1
Access Front to Rear 2U Cable
Trough - Option 2
Access Front to Rear 2U Cable
Trough - Option 3
Access Front to Rear 2U Cable
Trough - Option 4
19-Inch Angle Centers*
Shipping Wt.
in.
(mm)
lbs.
(kg)
161/16” to 1613/16”
(408 to 427)
2.00
(0.90)
161/16” to 2315/16”
(408 to 608)
2.86
(1.30)
2315/16” to 3113/16”
(608 to 808)
3.86
(1.75)
3113/16” to 3911/16”
(808 to 1008)
4.85
(2.20)
* 19 Inch Mounting Angle Centers refers to the dimension between the 19-inch mounting face of the front and
rear Access Cabinet 19-inch mounting angles.
73
Horizontal Cable Management Options
Plastic Cable Tidies
Part
Number
Description
CTS
CTL
Small Mid Gray Tidy
Large Mid Gray Tidy
With ever-increasing high density cabling applications, effective cable
management is required to minimize installation times and create maximum
flexibility for installers and end users alike.
To enhance the unique Access open frame, Cooper B-Line offer two sizes of
plastic cable tidies. Both Large (CTL) and Small (CTS) versions share the
same characteristics.
Features:• Fits Directly To 19-inch Panel Mounts
• Hinged gate clip action
• Single hole fixing
• Multiple mounting positions
Technical Overview:• Mid-Gray Plastic
• CTS 211/16” (68mm) x 13/16” (30mm) internal opening
31/8” (80mm) x 19/16” (40mm) x 1” (26mm) external dim
• CTL 41/8” (105mm) x 13/4” (45mm) internal opening
43/4” (120mm) x 23/8” (60mm) x 11/8” (28mm) external dim
Twist & Lock Cable Management
The new Twist and Lock cable management system is designed to fit on all
Access Rack 19-inch uprights, and is also available as a 2 ‘U’ high 19-inch
panel mount version. It provides a versatile system for vertical and
horizontal cable management with the large diameter ensuring the correct
bend radius on cables. The arms can be fitted at any increments of 2 ‘U’
into location holes on the 19-inch panel mounts.
Twist & lock cable management
support arms, end retainers and
divider rings.
Part Number
Description
TLCMS
TLCMR
Arms and Ends (pack of 10)
Divider Rings (pack of 10)
Enhanced Twist & Lock Ends
This addition to the twist and lock range offers greater versatility than the
standard end fitting.
Part Number
Description
TLCMEF
Enhanced Twist & Lock ends (pack of 10)
Twist & Lock Cable Management Panel
Twist & lock arms fitted to
Access 19” uprights.
This 2 ‘U’ high panel incorporates up to 5 twist and lock arms to provide horizontal
cabling across the rack. The large diameter arms ensure the correct bend radius on
cables.
Part Number
Description
TLCMFP
2U Twist & Lock Cable Management Panels
Inter-Rack Cable Support Bracket
This bracket has been designed specifically for supporting vertical cable trunking
when fitted between bayed 800mm wide Access cabinets and also provides
horizontal cable support between racks when used in conjunction with twist and
lock arms.
Enhanced twist and lock ends
Part Number
Description
FCT88
Inter-rack Support Bracket
74
Access Cabinet Components
Velcro® Cable Ties
These products are used to secure
and organize cables to equipment
racks.
Reusable design allows cables to be
easily added or removed.
Part Number
Description & Length
1
SB72558x5
SB7251x10
Cable Wrap 5/8” x 5” (16mm x 127mm)
Cable Wrap 1” x 10” (25mm x 254mm)
2
SB72658x4
SB7261x8
Cable Catch 5/8” x 4” (16mm x 101mm)
Cable Catch 1” x 8” (25mm x 203mm)
3
SB72758x6
Cable Strap 5/8” x 6” (16mm x 152mm)
4
SB72834x6
Cable Hanger 3/4” x 6” (19mm x 152mm)
Note: Sold in standard packages of ten (10).
3
1
4
2
Blanking Panels
Blanking Panel Application
Managing Airflow.
Unused vertical space in open frame racks and rack enclosures creates an unrestricted recycling of hot air that
causes equipment to heat up unnecessarily. The use of blanking panels can reduce this problem.
Active equipment mounted in racks cools itself by drawing cooled air from the data centre or the raised floor
environment. If any heated exhaust air is allowed to return to the air inlet of the equipment, an undesirable
overheating condition may occur.
Within the rack itself the possibility exists for hot exhaust air to be recycled into the active equipment air intake.
This is mainly caused when hot exhaust air returns above or below the equipment in unused rack space.
This recycling of air is not widely appreciated by data Centers and is a cause of equipment overheating. The use
of blanking panels, to stop hot air recirculation, is a low cost solution that requires no power.
Overheating due to air recirculation and the benefits of using blanking panels are well recognized by IT equipment
manufacturers, and Cooper B-Line can provide a wide range of blanking panels to suit all 19-inch rack
applications.
75
Access Cabinet Components
Front to Rear Blanking Panels
Quick Fit Adjustable Depth Switch / Server Side
Blanking Panels
Designed for use in applications where both servers and switches need to be
housed in a single enclosure, these quick fit, adjustable depth panels form part
of our modular approach to the optimization of air-cooling within our Access
cabinet solution.
Incorporating the same tool-less turn hardware as we use on our quick fit front
19-inch blanking panels, these panels can easily and quickly be fitted to our
Access cabinet range, where the mounting angles have a side mount facility.
Available in three height (1U, 2U and 5U) and depth configurations, the
deployment of these quick fit, adjustable depth blanking panels in conjunction
with our vertical baffles and quick fit 19-inch blanking panels will allow users to
conveniently optimize the air flow within the cabinet structure ensuring:
• That the cold air feed is directed to the area where it is needed,
allowing the servers and switches to operate efficiently.
• That the hot air expelled by any servers or switches cannot recirculate
or contaminate the cold air feed.
• That the cabinet’s cooling efficiency is significantly improved and as a
consequence, provides improved power efficiency within the data room.
This type of scenario is often associated with the deployment of network
switches, including the Cisco 6500 series, where the switch section breathes
left to right across the unit.
Technical Specifications
Material
Panel - Mild steel 18 Gauge (1.2mm) thick (18swg)
Fixings – Black Polycarbonate
Finish
Painted RAL9005 Black
Fixing Type
Tool-less Turn Fasteners
Part Number
SESBP1U3QFB
SESBP1U4QFB
SESBP1U5QFB
SESBP2U3QFB
SESBP2U4QFB
SESBP2U5QFB
SESBP5U3QFB
SESBP5U4QFB
SESBP5U5QFB
Description
Dim “A”
in./(mm)
Dim “B”
in./(mm)
1U Quick Fit Server 165/8” to 205/8”
103/8” to 143/8”
Side Blanking Panel
(422 to 525)
(264 to 366)
1
1
13
1U Quick Fit Server 21 /16” to 25 /8” 14 /16” to 1813/16”
Side Blanking Panel
(535 to 638)
(376 to 478)
1U Quick Fit Server 251/2” to 291/2” 193/16” to 231/4”
Side Blanking Panel
(648 to 750)
(488 to 590)
5
5
2U Quick Fit Server 16 /8” to 20 /8”
103/8” to 143/8”
Side Blanking Panel
(422 to 525)
(264 to 366)
2U Quick Fit Server 211/16” to 251/8” 1413/16” to 1813/16”
Side Blanking Panel
(535 to 638)
(376 to 478)
1
1
3
2U Quick Fit Server 25 /2” to 29 /2” 19 /16” to 231/4”
Side Blanking Panel
(648 to 750)
(488 to 590)
5U Quick Fit Server 165/8” to 205/8”
103/8” to 143/8”
Side Blanking Panel
(422 to 525)
(264 to 366)
1
1
13
5U Quick Fit Server 21 /16” to 25 /8” 14 /16” to 1813/16”
Side Blanking Panel
(535 to 638)
(376 to 478)
5U Quick Fit Server 251/2” to 291/2” 193/16” to 231/4”
Side Blanking Panel
(648 to 750)
(488 to 590)
76
Shipping Wt.
lbs./(kg)
0.55
(0.25)
0.59
(0.27)
0.64
(0.29)
1.06
(0.48)
1.14
(0.52)
1.23
(0.56)
7.27
(3.30)
7.49
(3.40)
7.71
(3.50)
Access Cabinet Components
Blanking Panels
Universal 19” PlenaFill Plastic Blanking Panels
Designed to fit square pierced mounting rails, these plastic tear off
blanking panels provide an ideal solution to quickly and easily improve
your cabinet's cooling efficiency.
• Each panel is a 27U sheet with serrated tear-offs every 1U
• Available in single sheet or 10 sheet packs
• Manufactured from fire retardant UL-VO compliant material, finished
dark gray
Part
Number
Punch
Remover
Snap Rivet
Description
CBLPF27U-1
(1) 27U Blanking Panel &
1 Pack of 50 Square Hole Snap Rivets
CBLPF27U-10BR
(10) 27U Blanking Panels &
10 Packs of 50 Square Hole Snap Rivets
CBLPFHP
Hole Punch Tool
CBLPFSRRT
Snap Rivet Remover Tool
CBLPFBR
Snap Rivets (50 Pack)
19-Inch Quick-Fit Tool-Less Blanking Panels
New to Cooper B-Line’s standard product offering comes a range
of quick fit 19-inch blanking panels. Incorporating tool-less turn
hardware these panels can be easily and quickly fitted to all
EIA-310-E compliant 19-inch enclosures having 19-inch square
pierced mounting rails. Ideal for blanking off unused portions of the
front 19-inch mounting area, these panels are available in 1U, 2U
and 5U increments to suit all applications.
Standard finish: RAL 9005 Black
Part Number
Description
Shipping Wt.
in.
(mm)
PPS1UQFB
1U 19-Inch Quick Fit Blanking Panel.
482.6mm Wide x 44.0mm High
0.55
(0.25)
PPS2UQFB
2U 19-Inch Quick Fit Blanking Panel.
482.6mm Wide x 89.0mm High
1.00
(0.45)
PPS5UQFB
5U 19-Inch Quick Fit Blanking Panel.
482.6mm Wide x 222.0mm High
2.42
(1.10)
77
Access Cabinet Components
Vertical Baffles
23.6” (600mm) Wide Cabinet Vertical Baffles
Brush Strip Blanking Panels
Available to suit 23.6” (600mm) wide Access cabinets, these quick fit,
vertical, brush strip baffles have been designed to enhance the
cooling efficiency of the Access cabinet, by simply sealing off the
area between the 19-inch mounting angle and the side panel.
One of the fundamentals for providing efficient cabinet cooling is the
ability to stop hot air/cold air cross over. Not addressing this issue
can result in the hot air expelled by the active equipment recirculating
inside the cabinet structure. This scenario can ultimately lead to
extreme hot spots, which in turn can cause premature equipment
failure.
Taking a matter of minutes to fit, these vertical brush strip baffles can
easily be retro fitted to all 23.6” (600mm) wide Access cabinets. Simply
bolt the mounting brackets to the top and bottom frame and then clip
the vertical baffle in position, using the quick fit tool-less fasteners.
Once in place, the vertical baffles form an effective barrier to stop hot
air recirculating to the front of the cabinet. When used in conjunction
with blanking panels, significant improvements can be made to the
cabinet’s cooling efficiency.
Importantly the baffles do not affect the ability to cable down the
sides of a 23.6” (600mm) wide cabinet. Each of the vertical baffles
incorporates a brush section, which allows the baffles to be either
fitted over existing cables or for additional cables to be passed
through. In each case the bristles on the brush effectively seal around
the cables, stopping leaks.
The 23.6” (600mm) wide baffles can be configured to suit a wide range
of installations, including those incorporating mixed technologies
such as servers and switches.
Although the baffles can be staggered to create two “L” shaped voids,
Cooper B-Line recommends the use of 31.5” (800mm) wide cabinets
for housing 19-inch mounted active equipment requiring side to side
ventilation, in order to maintain equipment cooling efficiency.
Part Number
ACVBPA426A
ACVBPA426B
ACVBPA476A
ACVBPA476B
Description
Shipping Wt.
Access Cabinet Vertical Brush Strip Baffles
To fit 42U x 23.6” (600mm) wide cabinet
Finished Light Gray NCS 1502-Y
Access Cabinet Vertical Brush Strip Baffles
To fit 42U x 23.6” (600mm) wide cabinet
Finished Black RAL9005
Access Cabinet Vertical Brush Strip Baffles
To fit 47U x 23.6” (600mm) wide cabinet
Finished Light Gray NCS 1502-Y
Access Cabinet Vertical Brush Strip Baffles
To fit 47U x 23.6” (600mm) wide cabinet
Finished Black RAL9005
lbs.
(kg)
7.05
(3.20)
7.05
(3.20)
8.38
(3.80)
8.38
(3.80)
Each set is comprised of:
two (2) vertical brush strip baffles, two (2) pairs of handed mounting brackets, one (1) fixing kit.
78
Access Cabinet Components
Vertical Baffles
31.5” (800mm) Wide Cabinet Vertical Baffles
Brush Strip Blanking Panels
Available to suit 31.5” (800mm) wide Access cabinets, these quick fit, rotating,
vertical brush strip baffles stop hot air recirculating around to the front of the
cabinet, by filling in the aperture between the mounting angle and the side
panel.
One of the basic requirements for providing efficient cabinet cooling is the
ability to stop hot air/cold air cross over. Not addressing this issue can result in
the hot air expelled by the active equipment recirculating inside the cabinet
structure. This scenario can ultimately lead to extreme hot spots, which in turn
can cause premature equipment failure.
Forming an effective barrier, these vertical brush strip baffles can easily be
configured to suit a wide range of installations, including those incorporating
mixed technologies such as servers and switches.
For normal server applications these baffles would be fitted either side of the
front 19-inch mounting angles.
Where mixed technologies, such as servers and switches need to be housed,
the baffles can be staggered creating two “L” shaped voids. Typically, a baffle
would be fitted on the front left hand side, providing a cold air void along the
front and right hand side of the cabinet. The hot air void would then comprise
the opposing “L” shaped void down the left hand side and rear of the cabinet.
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
Part Number
ACVBPA428A
ACVBPA428B
ACVBPA478A
ACVBPA478B
Description
Shipping Wt.
Access Cabinet Vertical Brush Strip Baffles
To fit 42U x 31.5” (800mm) wide cabinet
Finished Light Gray NCS 1502-Y
Access Cabinet Vertical Brush Strip Baffles
To fit 42U x 31.5” (800mm) wide cabinet
Finished Black RAL9005
Access Cabinet Vertical Brush Strip Baffles
To fit 47U x 31.5” (800mm) wide cabinet
Finished Light Gray NCS 1502-Y
Access Cabinet Vertical Brush Strip Baffles
To fit 47U x 31.5” (800mm) wide cabinet
Finished Black RAL9005
lbs.
(kg)
18.74
(8.50)
18.74
(8.50)
20.94
(9.50)
20.94
(9.50)
Each set is comprised of:
two (2) vertical brush strip baffles, two (2) pairs of handed mounting brackets, one (1) fixing kit.
79
Access Cabinet Components
Fan Units
2U Scavenger Fan Units
Developed to mount into the bottom 2U of the cabinet the scavenger
fan tray has been designed to pull cold air from either the floor void or
from the local ambient environment.
With the top perforated area of the fan tray protruding through the
front 19-inch mounting angles the unit feeds air into a chimney
created by a solid door, side panels, vertical baffles and equipment
mounted in the cabinet. Any unused 19-inch apertures need to be
blanked off to maximize cooling efficiency.
Ideal for scenarios where the air flow to the cabinet is restricted due
to either:
• The remote location of the cabinet in relation to the CRAC unit
(Computer Room Air Conditioning)
• The velocity of the air from the CRAC unit being too high, which
causes the air to bypass the cabinet location and provides
ineffective cold air feed.
In such cases the scavenger unit is capable of greatly improving the
air feed characteristics of the cabinet.
Technical Specifications
Height
2U - 31/2” (88.1mm)
Width
19” (482.6mm) wide (over mounting lugs)
17” (432.6mm) wide (over plenum chamber)
Depth
181/4” (463.0mm)
Protrusion Through 19-inch
315/16” (100.0mm)
Mounting Facility
EIA 310E 19-inch compliant
Mounting Range
161/2” (420.0mm) min
269/16” (675.0mm) max
Unit Weight
17.8 lbs. (8.1kg)
Material
16 Gauge (1.5mm) mild steel
Finish
Painted Black RAL9005
Power Indicator
LED lit green when power is present
Lead Type
Supplied with IEC 320 (10amp) to UK 3-Pin (BS1363) lead
Warranty
12 Months
Compliance
WEEE Directive. RoHS Compliant CE Approved
Part Number
Description
Electrical Supply Air Flow Characteristics
ft3/Hour
(m3/Hour)
RMHPFU230
2U Scavenger Fan Tray Assembly
220v A/C 50Hz
23837
(675)
RMHPFU120
2U Scavenger Fan Tray Assembly
110v A/C 60Hz
24543
(695)
80
Access Cabinet Components
Rack Mounted Fan Units
In Rack Ventilation Units
Based on universal 19-inch mounting Centers (IEC 297 standard), Cooper
B-Line offers two sizes of In-Rack Ventilation Units. Both 3 and 6 fan versions
share the same characteristics.
•
•
•
•
•
•
Fits directly to panel mounts.
Neon power indicator.
Occupies only 1U of rack space.
Front panel metalwork 3.0mm powder coated mild steel.
Other metalwork 1.2mm powder coated mild steel.
Fan specification - see page 63 for the roof mounted fan tray.
Part Number
Description
No. of Fans
Color
IVU3L
IVU3LB
IVU6L
IVU6LB
Ventilation Unit - 230v A/C
Ventilation Unit - 230v A/C
Ventilation Unit - 230v A/C
Ventilation Unit - 230v A/C
3
3
6
6
Light Gray
Black
Light Gray
Black
IVU3L1
IVU3L1B
IVU6L1
IVU6L1B
Ventilation Unit - 110v A/C
Ventilation Unit - 110v A/C
Ventilation Unit - 110v A/C
Ventilation Unit - 110v A/C
3
3
6
6
Light Gray
Black
Light Gray
Black
3 Fan Unit
6 Fan Unit
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
81
Access Cabinet Components
Earth Kits & Earth Bars
Cabinet Earthing Kits
An extensive range of earth kits and earth bars are available to
cover our range of standard products. In addition, we also offer
a range of standard, non-cabinet specific, products that can be
easily modified to fit most applications.
Earth kits are available for each of our standard products lines.
Each kit comprises sufficient earth leads, nuts and screws to
provide earth continuity through the product in compliance to
EN60950 Clause 2.5.11.
Part Number
Description
UAECEK
Access Cabinet Earth Kit
Static Earth Point
Comprising of a bracket and applicable fixings, the Static Earth Point can be
attached to any suitable point on any of the standard Access 19-inch vertical
rails (not 3 into 2 rail configurations). Finished in a zinc plate and clear
passivate finish, the Static Earth Point provides earthing continuity to the
Access frame which in turn can be bonded down to any suitable clean earth
point.
Part Number
Description
AEB
Cabinet Electro Static Earthing Point
82
Access Cabinet Components
Earth Kits & Earth Bars
Horizontal Rack Ground Bar Kit
Comprising of a ground bar and applicable hardware as shown below, the Horizontal Rack
Ground Bar can be attached to any of the standard Access 19-inch vertical rails. Isolators
may be used to separate bar from rack or omitted depending on application.
Material is 3/16” (4.7mm) x 1” (25.4mm) copper bar.
Part Number
Description
SBHB119K
Pre-Tapped - 19.37” (492mm) Length
Universal Grounding Bar
Comprising of a ground bar, splice plate and applicable hardware as shown below, the
Universal Grounding Bar is used as a rack mounted equipment grounding bus.
Material is 3/16” (4.7mm) x 3/4” (19.0mm) copper bar.
SB57903
shown
Part Number
Description
SB57903
19” Rack Width - 19.312” (490mm) Length - 16 Holes
SB57904
23” Rack Width - 23.312” (592mm) Length - 18 Holes
83
Access Cabinet Components
Earth Kits & Earth Bars
Vertical Rack Ground Bar & Kits
Comprising of a ground bar or ground bar and hardware kit, the Vertical Rack Ground Bar
can be attached to any of the standard Access 19-inch vertical rails. Isolators may be used
to separate bar from rack or omitted depending on application.
Material is 1/4” (6.3mm) x 5/8” (15.9mm) copper bar.
Hardware
Kit
SBVB36
shown
Part Number
Description
SBVB36
Ground Bar Only - Pre-Tapped Holes - 36” (914mm) Length
SBVB36K
Bar & Hardware Kit - Pre-Tapped Holes - 36” (914mm) Length
SBVB72
Ground Bar Only - Pre-Tapped Holes - 72” (1828mm) Length
SBVB72K
Bar & Hardware Kit - Pre-Tapped Holes - 72” (1828mm) Length
84
Access Cabinet Components
‘U’ Height Labels & Bolt Through Kits
Unit Height Labels
One of the most difficult tasks when fitting equipment in 19-inch cabinets
is locating the unit height position for mounting.
Cooper B-Line have solved this problem by supplying a self-adhesive ‘U’
height numbering strip which simply fixes to the front face of the 19-inch
panel mounts.
Technical Overview
•
•
•
•
Pressure sensitive self adhesive
Universal size to suit all Access cabinets
Just trim to the desired unit height as required
Black lettering on white background
Part Number
Description
AUHL
AUHLR
AUHLFR
AUHLFRR
Pairs of Height Labels, 1-47 - Top to Bottom
Pairs of Height Labels, 1-47 - Bottom to Top
Pairs of Height Labels, 1-47 & 49-94 - Top to Bottom
Pairs of Height Labels, 1-47 & 49-94 - Bottom to Top
Bolt Through Kit
Access bolt through kits are the preferred method of baying suites of
Access cabinets. The kit consists of a set of two M8 x 23/4” (70mm)
screws, nuts and washers, finished in zinc plated. Suitable for Access
cabinets with pre-drilled extrusion, bolt through kits are available ex-stock.
Part Number
Description
BTK
Bolt Through Kit
Light Gray & Blue Cabinets Shown For Clarity Only
Standard Default Finish Is Black With Black Trim
85
Access Control & Environmental Monitoring
i-PAL & i-BOX Systems
Introduction
Today’s businesses are becoming more and more reliant on their IT infrastructure to sustain a competitive edge.
Businesses are therefore looking to maximize their capital investments in IT systems by striving to achieve 100%
network availability.
“Human Error” remains the largest threat to network integrity. Something as simple as incorrect or unauthorized
modification to cable patching can cause systems to fail resulting in lost time and lost revenues. The first line of
defense is therefore the proactive control of who has access to the infrastructure and when!
While building control systems have been developed to manage room access, historically cabinet level security
has been managed with conventional barrel key locks. On larger sites this has required the adoption of complex
and time-consuming systems to manage the authorization of personnel and the issuing of keys. Even with these
elaborate processes in place, the risk from the loss of keys, not to mention the potential expense and trouble of
changing locks, can make access control an expensive hidden cost.
In response to demand from our customers Cooper B-Line has developed i-PAL, an intelligent electronic
proximity and control solution. Based on proven building control architecture i-PAL can deliver either simple
configurable local access and control or, when integrated with i-BOX, a fully Scalable local and remote access
control and monitoring solution with access tracking and alarm function. In addition the adoption of i-BOX has
the added benefit of, fully configurable environmental monitoring solution with a range of SMART sensors
complete with individually configurable threshold alarms.
Control and Monitoring
Integrated Proximity Access Locking Handle
i-PAL offers a simple modular solution to cabinet access control utilizing leading edge
proximity card technology. Fully compatible with the Access Cabinet range i-PAL can be
supplied as either a factory or retrofit option.
As a stand alone solution i-PAL can be configured in a matter of minutes to provide
configurable access control;
Key Features
✔ Proactive Control
✔ Local Management
✔ Easy Configuration
✔ Scalable
✔ Retrofit-able
✔ Upgradeable
Step 1 Simply plug the i-PAL handle (IPALBL, IPALBK, IPALGY) into its multi regional
universal power supply (IBIPPSU).
Step 2 Then using the system administrator program card you can program in up to
500 user cards per handle.(IPALCARD contains one system administrator
program card together with three user and user delete cards - additional user
cards are available IPALACARD).
Step 3 Add or delete user cards using the system administrator program card as required.
i-PAL can also be designed into other applications and is compatible with a number of
other cabinet products. i-PAL is designed for indoor applications although other handles
offering the same functionality are available for outdoor applications, please contact us for
details.
+
+
IBIPPSU
IPALBK
86
=
IBOXCARD
Access
Control
Access Control & Environmental Monitoring
i-PAL & i-BOX Systems
Technical Data
Dimensions Handle assembly:
Dimensions I-PAL module:
Voltage:
Power:
Current:
Communications Port:
Standalone operation:
Part Number
IPALBL
IPALBK
IPALGY
IPALEXTL
IBIPPSU
IPALCARD
IPALACARD
30mm Wide x 20mm Deep x 154mm High
34mm Wide x 36mm Deep x 85mm High
12VDC
0.72W
60ma @ 12VDC
RS232
500 Card Capacity (When Connected to i-BOX, see i-BOX details)
Description
Single i-PAL Handle Blue
Single i-PAL Handle Black
Single i-PAL Handle Gray
i-PAL Handle 5 metre Extension Lead
i-BOX/i-PAL Universal Power Supply
i-PAL Card set comprising of 1x program card,
3x user cards and 3x user delete cards
i-PAL Additional card set comprising of 5x user cards
and 5x user delete cards
IPALBL
IPALBK
IPALGY
*Note lock rods/lock cam may require modification to operate correctly
Solution
Integration with i-BOX
By simply integrating i-PAL with i-BOX the i-PAL becomes a fully Scalable local and remote
access control system with full system administrator override facility providing ultimate access
control. Additional enhanced functions include;
• Integrated centralized user card management database allowing individual user cards to be
added, deleted or modified in a matter of seconds. Any changes to the database trigger
automatic updates to all the associated access points (handles) providing real time seamless
security
• An increased user capacity from 500 users per access points (stand alone i-PAL) to 4,000
users per access point
• Real time transaction logging including event date/time stamp for each access point
transaction or attempted transaction
• The ability to generate detailed reports with the option to filter the data in a wide variety of
ways including by an individual access point, group of access points, employee name,
company / department, individual date or date range. The system also allows this data to be
exported should the information need to be presented in an alternative format or need further
analysis
• The ability to define and associate up to 256 configurable user times zones. These time zones
can then be associated to individual cards providing authorized access periods (i.e. 08:00 to
18:00 Monday to Friday access is granted)
• IP camera integration allowing individual access points to be associated with local cameras
providing the opportunity to link video or photographic data to all logged transaction events
• The option to link unauthorized/exceptional access transactions to SMS or e-mail alerts
providing real time security alarms
Importantly the loss of the network does not mean loss of security as the handle holds the card access
data and simply uploads authorized transaction data to the i-BOX database when the network and i-BOX
come back on line. Each i-BOX is configured to support the integration of up to two i-PAL handles.
87
Key Features
✔ Simple Key Replacement
✔ Support for 4,000 Users
✔ Transaction Logging
✔ Time Zone Configuration
✔ Plug and Play
✔ GUI Management Interface
✔ IP Camera Link
✔ Online for:
Real Time Alarm Reporting,
SMS; Email, SNMP Traps
Access Control & Environmental Monitoring
i-PAL & i-BOX Systems
Solution
As well as offering the integration of an enterprise level Access Control and Security system i-BOX has the added benefit of
providing a comprehensive Environmental monitoring solution, allowing for the convergence of Facilities / IT monitoring within
a single network addressable unit. Built into i-BOX as standard are four environmental sensors, these being;
• Temperature
• Humidity
• Light
• Consumed voltage
The further fourteen SMART ports on the front of the i-BOX allow a whole range of optional plug and play sensors to be
connected, details of these sensors are shown on the preceding pages. In each case the individual sensor provides;
• Individual sensors can be linked up to 15m away from the i-BOX using the sensor extension cables (IBOXSEC)
• The ability to set individual sensor level threshold limits with pre alarm and full alarm functionality triggering alarm
out puts via inbuilt SNMP (Small Network Management Protocol) agents including V2c
• In most cases sensors have the function to provide Low , Pre, and High threshold alarms with the added function of
being able to set Quick Change alarms identifying potential problems when they first occur
• Threshold alarms can be set to be temporarily disabled in instances when the cabinet door or side panels are opened
altering the microenvironment within the cabinet
• The facility to link alarm functions with external “calls to action” including SMS and e-mail alerts, essential for lights out
or unmanned facilities
• Configurable sensor level identification enabling quick and easy identification of the item in alarm
• Full plug and play functionality providing easy intuitive configuration
• Built in network and sensor test wizards to ensure optimum system operation
Other features of the system include;
• Support for up to 65,000 users per network system.
• The ability to manage up to 256 i-BOX units using one network PC providing the ability to control, monitor and manage up to;
• 512 x i-PAL access points.
• 1,024 x Integrated temperature, humidity, light and consumed voltage sensors.
• 3,584 x Additional fully configurable sensors.
• Native Ethernet TCP/IP, UDP 10Mb communications.
• Local and Wide Area Network (LAN / WAN) support.
• CCTV integration connecting up to two cameras to one i-BOX.
• Simple integration to either cabinet level or room level fire alarm systems.
• ActiveX Software Development Kit (SDK) for full integration to third party applications.
• Card management and configuration facility with the ability to generate user cards including photo ID.
• Multi language support.
88
Access Control & Environmental Monitoring
i-PAL & i-BOX Systems
i-BOX Part Number And Technical Specification
The i-BOX unit is an ethernet controller that plugs directly into the IP network.
• The unit is powered by a single IBIPPSU.
• The IBOX has a single temperature, humidity, light level and incoming voltage sensor built into the unit.
• Voltage Sensor: Incoming voltage sensor, sampling 10Bit
• Aspirating Fan: 5.2 cfm
• Humidity 0-100%, 0.5% Resolution, 3% Accuracy,
• Light Level Sensor: 0 to 200 Lux
• Temperature Range -25ºC to 123.8ºC, Accuracy .04ºC @ 25ºC to 40ºC
Controller and sensor connections
• Two IPAL Cabinet Handle, or Standard Access Control Doors via 6 way Mini Din Plug
• Two IBOXDC, Door Position Sensor, Mini Din through connector
• An additional 14 external devices and sensors can be plugged into the i-BOX via 4 way FCC68 connectors
• One 9 way D Type for addition set firmware I/O, default fire interface plus 9 x Status LEDs
Unit Size And Operating Environment
• Dimensions 212mm wide x 95mm deep x 29mm high
• Steel Enclosure: Finish Powder Coated Gray TEX36
• Universal Fixing Bracket 25 x 25mm
• Operating Environment -25ºC to 85ºC
• Voltage: 12VDC (48VDC option)
• Power: 2.52 Watts
• Current: 210ma @ 12VDC
Communication Protocols
• Communications Port: RJ45 Ethernet
• Protocol: TCP/IP, UDP and ARP
• Card Holder: 4,000 capacity local storage expandable to 32,000
• Supporting: LAN/WAN & VPN
• Standard Memory: 5,000 transaction local storage expandable to 32,000
i-BOX USER CARDS
Part Number
IBOXCARD
IBOXFOB
IBOXAPL
Cards
Fobs
89
Description
Pack of 10 Programmable i-Box User Cards
Pack of 10 Programmable i-Box User Fobs
Pack of 10 Programmable i-BOX User Self Adhesive Labels
Access Control & Environmental Monitoring
i-BOX Sensor Options
Optional i-BOX Sensors
Part Number
Description
IBOXTS
SMART Temperature Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack
• Set high low temperature fresh hold alarm and ambient temp on demand
Associate Door Contact for door left open alarm etc
• Door Contact Read range 15mm from side 10mm from front
• One Status LED
• Temperature: -10 to 75c Accuracy 4%
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered by i-BOX
• Power: 15ma
IBOXDC
Door Position Contacts
• With 2.5 meter terminated lead with mini din through jack. For associated
IBOX only. Read range 15mm from side 10mm from front
• One Status LED
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered by i-BOX
• Power: 8ma
IBOXLCS
SMART Location Contacts
• With 2.5 meter terminated lead with 4 way FCC68 jack. For Side Panel
open/closed, and equipment location monitoring
• Read range 15mm from side 10mm from front
• One Status LED
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered by i-BOX
• Power: 12ma
IBOXTCS
Combined Temperature And Contact Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack
• Set high low temperature fresh hold alarm and ambient temp on demand
• One Status LED
• Temperature: -10ºC to 75ºC Accuracy 4%
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered by i-BOX
• Power: 12ma
IBOXHTS
SMART Temperature And Humidity Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack
• Set high low temperature fresh hold alarm and ambient temp on demand
• One Status LED
• Humidity 0-100%, 0.5% Resolution, 3% Accuracy
• Temperature: -25ºC to 123.8ºC Resolution 0.04ºC @ 25 to 40ºC
• Powered from i-BOX
• Power: 16ma
IBOXLS
Smart Light Level Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack. Designed for
darkened environments, high level light and color responsive sensors
available on request
• One Status LED
• Light Level Response: 0 To 200 Lux
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered from i-BOX
• Power: 15ma
90
Access Control & Environmental Monitoring
i-BOX Sensor Options
Optional i-BOX Sensors
Part Number
IBOXVS
IBOXAR
IBOXFX
IBOXPIRS
IBOXSB
IBOXSDU
IBOXSEC
IBOXSMBK
Description
Smart Intrusion Vibration Vandalism Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack
• One Status LED
• Vibration fresh hold from 0-100 SPM
• Dimensions: 20mm high x 60mm long x 20mm wide
• Powered by i-BOX
• Power: 12ma
Auxiliary Relay and Two Digital Inputs
• With 2.5 meter terminated lead with 4 way FCC68 jack
• One Status LED
• Face Plate single gang electrical box size: 85mm square 13mm deep
• Back Box: 110mm high x 86mm wide x 28mm deep
• Relay rated: 48VDC @ 5amp
• Digital Inputs: Normally open or closed voltage free contacts
• Powered by i-BOX
• Power: 28ma quiescent 52ma alarm
SMART Flood Sensor
• With 2.5 meter terminated lead with 4 way
• FCC68 jack, 5 Meters Flood cable, supplied with 15 Fixing clips
• Two quick blow fuses for electrical safety
• Flood scale 40-170 using sensitive wicking cable
• One Status LED
• Face Plate single gang electrical box size: 85mm square 13mm deep
• Back Box: 110mm high x 86mm wide x 28mm deep
• Voltage: 12v
• Power: 50ma
Intrusion 360 Passive Infra Red Movement Sensor
• With 2.5 meter terminated lead with 4 way FCC68 jack
• One Status LED, Multizone PIR
• Area covered 7M x 6M @ a mounting height of 2.5M
• Dimensions: 26mm high x 60mm long x 20mm Wide
• Powered by i-BOX
• Power: 15ma
Sounder Beacon Unit
• With 2.5 meter terminated lead with 4 way FCC68 jack
• Four Red Flashing High Intensity Miniature bulbs flash at frequency of approximately 3Hz
• Sound Output: 100dB @ 1M
• Alarm Frequency 3.5-4.5KHz
• Dimensions: 45mm deep x 122mm long x 73mm wide
• Powered By i-Box
• Power: 200ma
i-Box Smoke Detector Unit
• With 2.5 meter terminated lead with 4 way FCC68 jack
• Combined optical smoke detector with rate of risen and fixed temperature heat
• One Status LED
• Temperature: -10ºC to 75ºC Accuracy 4%
• Smoke response to EN54 Part 7 Heat Response 60ºC
• Dimensions: 105mm diameter x 60mm deep
• Powered from i-BOX
• Power: 15ma quiescent 30ma in alarm
2.5m Sensor Extension Cable Terminated Lead
• With 4 way FCC68 with jack and socket
Sensor Mounting Bracket
• Single bracket supplied complete with fixings
91
Access Cabinet Components
i-BOX Sensor Options
i-BOX User Cards
Part Number
IBOXMFTL
Description
Monitored Fan Tray Lead
• 2.5 meter terminated lead with 4 way FCC68 jack, connection with two Molynx
3 pin connectors on flying lead for connection to fan tray
• One Status LED
• Dimensions: 25/32” (20mm) high x 23/8” (60mm) long x 25/32” (20mm) wide
• Digital Inputs: Normally open or closed dry contacts
• Powered by i-BOX
• Power: 12ma
• Designed for Microsoft® Windows XP™
i-BOX User Interface
Part Number
IBOXSW
Description
i-BOX Software
• Manages 65,000 card holders and access level
group with 256 time zones per system
• Built in alarm reporting, Photo ID, Who's in/out,
Configuration/User wizards for true Plug and Play operation
• CCTV Network Camera Support per Door
• Software using SQL Standard Query Language
• Protocol: TCP/IP, UDP and ARP
• Alarm Handling: SMS, Email & SNMP Traps version 2.1c
• SDK option for Integration to 3rd Party Applications, with
support for up to 4016 systems
• Minimum PC specification, Pentium Processor, 64Mb RAM,
64Mb Video Memory for 800 x 600 resolution, 200Mb of
free hard disk space 100 BaseT ethernet connection,
Mouse, Keyboard
• Designed for Microsoft® Windows XP™
Access Cabinet i-PAL and i-BOX Options - See pages 83 & 84 for part number and kit information
IPAL 1 R A 22
System
System Option
i-PAL
i-BOX
1 = 1 i-PAL Handle
(Stand Alone Option)
2 = 1 i-PAL Handle
(Network Option)
3 = 1 i-PAL Handle
+ 1 i-BOX Unit
Supply
Configurator
R = Retro Fit
F = Factory Fit
Handle /
Trim
Color
Cabinet
Unit
Height
A = Blue
B = Black
G = Gray
22 = 22U
27 = 27U
39 = 39U
42 = 42U
47 = 47U
4 = 2 i-PAL Handles
+ 1 i-BOX Unit
92
Access Control & Environmental Monitoring
i-PAL Sensor Options
Each kit comprises the following supplied boxed and labeled;
• One Color Specific i-PAL Handle
• Ten Self-adhesive cable clips
• One Bottom Locking Rod (Unit Height Specific)
• One Program Card
• One Electronic Lock Rod Extension
• Two User Cards
• One Rod Coupling
• Two User Delete Cards
• One Cable Duct (Universal Width - Trim To Size)
• One set of fitting instructions
• One Universal Power Supply
• One Glass Door Top Trim Strip - Color Specific
(Trim To Size If Required)
Customer Retro Fit Kit
Factory Fitted Upgrade
Part Number
Cabinet Height
IPAL1R__22
IPAL1R__27
IPAL1R__39
IPAL1R__42
IPAL1R__47
22U
27U
39U
42U
47U
Part Number
Cabinet Height
22U
27U
39U
42U
47U
IPAL1F__22
IPAL1F__27
IPAL1F__39
IPAL1F__42
IPAL1F__47
__ Color Scheme Options
A = Blue
B = Black
G = Gray
This option would be used where the handle will be plugged into an existing i-BOX installation.
Each kit comprises the following supplied boxed and labeled;
• One Color Specific i-PAL Handle
• Ten Self-adhesive cable clips
• One Bottom Locking Rod (Unit Height Specific)
• One Cable Duct (Universal Width - Trim To Size)
• One Electronic Lock Rod Extension
• No Power Supply Unit
• One Rod Coupling
• One Glass Door Top Trim Strip - Color Specific
(Trim To Size If Required)
Customer Retro Fit Kit
Factory Fitted Upgrade
Part Number
Cabinet Height
IPAL2R__22
IPAL2R__27
IPAL2R__39
IPAL2R__42
IPAL2R__47
22U
27U
39U
42U
47U
Part Number
IPAL2F__22
IPAL2F__27
IPAL2F__39
IPAL2F__42
IPAL2F__47
__ Color Scheme Options
A = Blue
B = Black
G = Gray
93
Cabinet Height
22U
27U
39U
42U
47U
Access Control & Environmental Monitoring
i-BOX Sensor Options
Each kit comprises the following supplied boxed and labeled;
• Two Color Specific i-BOX Handles
•
• Two Bottom Locking Rod (Unit Height Specific)
•
• Two Electronic Lock Rod Extension
•
• Two Rod Coupling
•
• Two Cable Duct (Universal Width - Trim To Size)
•
• One Universal Power Supply
•
Customer Retro Fit Kit
Twenty Self-adhesive cable clips
One i-BOX Unit
Ten User Cards
One AX Series User Interface Software
One set of fitting instructions
Two Glass Door Top Trim Strips - Color Specific
(Trim To Size If Required)
Factory Fitted Upgrade
Part Number
Cabinet Height
Part Number
Cabinet Height
IBOX4R__22
IBOX4R__27
IBOX4R__39
IBOX4R__42
IBOX4R__47
22U
27U
39U
42U
47U
IBOX4F__22
IBOX4F__27
IBOX4F__39
IBOX4F__42
IBOX4F__47
22U
27U
39U
42U
47U
__ Color Scheme Options
A = Blue
B = Black
G = Gray
Each kit comprises the following supplied boxed and labeled;
• One Color Specific i-BOX Handles
•
• One Bottom Locking Rod (Unit Height Specific)
•
• One Electronic Lock Rod Extension
•
• One Rod Coupling
•
• One Cable Duct (Universal Width - Trim To Size)
•
• One Universal Power Supply
•
Customer Retro Fit Kit
Ten Self-adhesive cable clips
One i-BOX Unit
Five User Cards
One AX Series User Interface Software
One set of fitting instructions
One Glass Door Top Trim Strips - Color Specific
(Trim To Size If Required)
Factory Fitted Upgrade
Part Number
Cabinet Height
Part Number
Cabinet Height
IBOX3R__22
IBOX3R__27
IBOX3R__39
IBOX3R__42
IBOX3R__47
22U
27U
39U
42U
47U
IBOX3F__22
IBOX3F__27
IBOX3F__39
IBOX3F__42
IBOX3F__47
22U
27U
39U
42U
47U
__ Color Scheme Options
A = Blue
B = Black
G = Gray
94
Access Control & Environmental Monitoring
Integrated Intelligent Power Distribution
i-PDU has been developed to seamlessly integrate with Cooper B-Line’s i-BOX and i-PAL systems (access control and
environmental monitoring system) providing the ability to set-up, manage and control an intelligent power distribution
solution using standard IP network addressable technology.
Once an i-BOX has been configured on the network and the i-PDU has been connected the system offers the benefit
of real time, bi-directional communications with each i-PDU connected. Importantly this provides not only the ability to
accurately monitor and record the power consumption values of each i-PDU but allows the system administrator to
control the operation of each and every one of the individual i-PDU sockets.
The i-PDU can be configured to perform users configurable outlet start up sequences. This soft start functionality also
includes the provision to allow optimized start up using pre set time delays or current draw thresholds.
The i-PDU contains a precise measuring device that samples for KWH readings 4,000 times per second, readings are
reported at scheduled intervals to the centralized database.
Features of i-PDU
• Seamless integration to i-BOX using the same central
management software platform (free of charge updates
may need to be installed)
• Twelve Individually fused outlets
• Ten IEC-60320 C13 +
• Two IEC-60320 C19
• Maximum current draw rating of 20 Amps
• Up to 4 i-PDU’s connected to one i-BOX
• Various power lead termination options
including13 Amp, 16 Amp & 32 Amp plugs
•
•
•
•
•
Plug and Play connection
Fully configurable sequential start-up
Mains filtered
Protected and monitored on/off switch
Two 20 Character display
• Individual Socket status: on / off / fuse failure and fault
• KWH display / Voltage / Current / Firmware and software
• Standalone configuration function button
Technical Specifications & Part Numbers
Material:
Finish:
Unit O/A Dimensions:
Unit Weight:
Packaged Size:
Mild Steel Housing
Painted Black RAL9005
531/8” (1350mm) High x 31/2” (90mm) Wide x 23/8” (60mm) Deep
11.4 lbs. (5.2kg)
61” (1550mm) x 57/8” (150mm) x 57/8” (150mm)
(Supplied Individually Boxed)
Packaged Weight: 14.0 lbs. (6.35kg)
Part Number
IBOXPDU1612WC1316C
Compliance
Description
• 220 / 230v A/C 50 Hz
• Max rating 20Amps
• Twelve Individually fused outlets
• Ten IEC-60320 C13 + Two IEC-60320 C19
• Individual outlet status LED
• On / Off Switch
• Fitted with 9 ft. (3m) power supply lead
terminated with a 16Amp Commando plug
• Integrated i-BOX power supply outlet
• Local PDU status screen
• Supplied with i-BOX power supply lead and
sensor port connection lead
• WEEE Directive • RoHS Compliant • CE Approved
95
Access Control & Environmental Monitoring
Integrated Intelligent Power Distribution
The new 1U high i-PDU has been developed, like the existing vertical i-PDU to seamlessly integrate with Cooper
B-Line’s i-BOX and i-PAL systems (access control and environmental monitoring system) providing the ability to set-up,
manage and control an intelligent power distribution solution using standard IP network addressable technology.
Once an i-BOX has been configured on the network and the i-PDU has been connected the system provides real time,
bi-directional communications with each i-PDU connected. Importantly this not only provides the ability to accurately
monitor and record the power consumption values of each i-PDU but also allows the system administrator to control
the operation of each and every one of the individual i-PDU sockets.
The i-PDU can be configured to perform users configurable outlet start up sequences. This soft start functionality also
includes the provision to allow optimized start up using pre set time delays or current draw thresholds.
The i-PDU contains a precise measuring device that samples for KWH readings 4,000 times per second, readings are
reported at scheduled intervals to the centralized database.
Features of i-PDU
•
•
•
•
•
•
Compact 1U 19-inch rack mounted unit
Twelve IEC-60320 C13 outlets on the rear of the unit
Each outlet individually fused
Maximum total current draw rating of 20 Amps
Up to four i-PDU’s can be connected to one i-BOX
Various power lead termination options including13 Amp,
16 Amp & 32 Amp plugs
• Seamless integration to i-BOX using the same central
management software platform (free of charge updates may
need to be installed)
•
•
•
•
•
•
Plug and Play connection
Fully configurable sequential start-up
Mains filtered
Protected and monitored on/off switch
Integrated i-BOX power connection
LED status lamp
Technical Specifications & Part Numbers
Material:
Finish:
Unit O/A Dimensions:
Unit Weight:
Packaged Size:
Packaged Weight:
Mild Steel Housing
Painted Black RAL9005
111/16” (43mm) H x 19” (483mm) W x 97/8” (250mm) D
10.1 lbs. (4.6kg)
4” (100mm) H x 205/8” (525mm) W x 133/4” (350mm) D
12.5 lbs. (5.7kg)
Part Number
IBOX1UPDU12WC1316C
Compliance
Description
• 220 / 230v A/C 50 Hz
• Max rating 20Amps
• Twelve Individually fused
IEC-60320 C13 outlets
• Individual outlet status LED
• On / Off Switch
• Fitted with 3m power supply lead
terminated with a 16Amp Commando plug
• Integrated i-BOX power supply outlet
• Supplied with i-BOX power supply lead and
sensor port connection lead
• WEEE Directive • RoHS Compliant • CE Approved
Details Upon Request
96
Access Control & Environmental Monitoring
I-BOX Shelf Unit
Part Number
IBOXSHELF
Description
i-BOX 19-Inch Front Mounted Sliding Shelf
• 1U high x 123/8” (315mm) deep sliding cantilever shelf finished in
Black RAL 9005. Designed to house a single i-BOX the shelf
has integrated cable management to ensure connections
remain stress free during operation and maintenance
• The shelf assembly is rated at 33 lbs. (15kg) load capacity
97
Technical Specification
Designed for loads up to 2,200 lbs when supported equally on the vertical panel mounts and using either the
skid, castor or jacking foot options.
The Access range has a top and bottom tubular frame, which is clad with sheet steel fascias and connected by
two vertical aluminum extrusions. (UK and World - wide Patents)
Framework
• Tube Frames
•
•
•
•
Fascias
Center Vertical Uprights
Corner Trims
Glass
Material
1” (25mm) x 1” (25mm) x 1” (25mm) wall thickness
corner welded steel tube.
18 Gauge (1.2mm) Steel CR4 Zinc Coated
Aluminum extrusion.
Nylon 66
Toughened BS6206 1981- gray tint - exposed
edges polished, bonded edges.
Cladding Panels
•
•
•
•
•
Side Panels
Rear Door
Front Door Styles
Top Panels
Hinge Mouldings
Material
18 Gauge (1.2mm) Steel CR4
16 Gauge (1.5mm) Steel CR4
16 Gauge (1.5mm) Steel CR4
18 Gauge (1.2mm) Steel CR4
Nylon 66
19-inch/ETSI Panel Mounts and 800/600 reducers.
Conforming to IEC 297 or ETSI 300-119 Part 3 standards with mounting facilities for universal front fixing and
Cooper B-Line side mounting accessories.
• Cross 800/600 reduction rails
• Vertical panel mounts 19-inch
• Vertical panel mounts ETSI
Material
14 Gauge (2.0mm) Steel CR4
14 Gauge (2.0mm) Steel CR4
14 Gauge (2.0mm) Steel CR4
Castor Plate/Plinth Plate
•
•
•
•
•
Corner Plates
Kick Plate Trim
Castor
Jacking Foot
Skid
11 Gauge (3.0mm) Steel CR4
18 Gauge (1.2mm) Steel CR4
550 lbs. (250kg) per castor rated loading
4400 lbs. (2000kg) static load
Nylon 66
Fixing Screws
• Main fixings M6 Socket set screws - Tensile Strength 10.9
• All other fixings M6 screws - Tensile Strength 8.8
98
Technical Specification
IP Rating IEC529
• IP20
Earthing / Earthing Kit
• Compliant to EN60950 Clause 2.5.11
Earthing Specification
The resistance of the connection between earthing terminal or earthing contact and parts required to be earthed shall
not exceed 0.1 ohms. The test current shall be 1.5 times the current capacity of any hazardous voltage circuit at the
point where failure of basic insulation would make the earth point live. The test voltage shall not exceed 12V and the
test current may not be more than 25 A.
Locking System
• Each door has a central, pull out and 90° turn locking handle with two point espan locking.
• Doors are hinged LH as standard but can be supplied or converted to RH hinged
• Handle and espan guides - Nylon 66, Locking rods 8mm MS Bar
Accessories
• Specific to Access – Top fan trays, Plinth/Castor/Jacking foot kits, Cable mounting accessories.
• Universal - All depth fitting accessories using the Cooper B-Line panel mount side fixings are compatible with the
Access rack. All front mounting accessories using the front 19-inch mountings are compatible.
Components
Std. Color Finish
• Corner Mouldings, Door Hinge Mouldings &
Door Lock assembly
RAL 9005 Black (VDI 22 texture) - Default
NCS 4550 -R90B Blue (VDI 22 texture)
• Vertical Extrusions
Structured Epoxy Polyester Powder DFT 50 Microns
RAL 9005 Black - Default
NCS 4550 -R90B Blue
• Top Frames, Top Panels, Side Panels and Doors
RAL 9005 Black
NCS 1502Y Light Gray
Structured Epoxy Polyester Powder DFT 50 Microns
• Internal Frame, 19-Inch Rails & Adaptor Channel
Painted standard silver
Epoxy Polyester Powder DFT 50 Microns
• Hardware & Lock Rods
Zinc & Trivalent Passivate BS EN 12329:2000
99
Technical Specification
UL Listing
NWIN.E235184 - Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems
Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems. See General
Information for Information Technology and Communications Equipment Cabinet, Enclosure and Rack Systems
COOPER B-LINE INC
509 W MONROE ST
HIGHLAND, IL 62249 USA
Safety of Information Technology Equipment - UL 60950
1.1 Scope
1.1.1 Equipment covered by this standard
This standard is applicable to mains-powered or battery-powered information technology equipment, including electrical
business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V and designed to be installed
in accordance with the Canadian Electrical Code, Part I, CSA C22.1; CSA C22.2 No. 0; and the National Electrical Code,
NFPA 70.
The standard is also applicable to equipment, unless otherwise identified by a marking or instructions, designed to be
installed in accordance with Article 645 of the National Electrical Code, NFPA 70, and the Standard for the Protection of
Electronic Computer Data-Processing Equipment, NFPA 75.
This standard is also applicable to such information technology equipment designed and intended to be connected directly to
a TELECOMMUNICATION NETWORK, regardless of the source of power.
It is also applicable to such information technology equipment designed to use the AC MAINS SUPPLY as a
telecommunication transmission medium (see note 4 of clause 6).
This standard specifies requirements are intended to reduce risks of fire, electric shock or injury for the OPERATOR and
layman who may come into contact with the equipment and, where specifically stated, for SERVICE PERSONNEL.
This standard is intended to reduce such risks with respect to installed equipment, whether it consists of a system of
interconnected units or independent units, subject to installing, operating and maintaining the equipment in the manner
prescribed by the manufacturer.
Safety of Information Technology Equipment - UL 60950 Cont.
This list is not intended to be comprehensive, and equipment that is not listed is not necessarily excluded from the scope.
Equipment complying with the relevant requirements in this standard are considered suitable for use with process control
equipment, automatic test equipment and similar systems requiring information processing facilities. However, this standard
does not include requirements for performance or functional characteristics of equipment.
1.1.2 Additional requirements
Requirements additional to those specified in this standard may be necessary for:
• Equipment intended for operation in special environments, for example, extremes of temperature; excessive dust,
moisture or vibration; flammable gases; and corrosive or explosive atmospheres
• Electromedical applications with physical connections to the patient
• Equipment intended to be used in vehicles, on board ships or aircraft, in tropical countries, or at altitudes greater than
2 000 m
• Equipment intended for use where ingress of water is possible; for guidance on such requirements and on relevant testing
see annex t.
NOTE - Attention is drawn to the fact that authorities of some countries impose additional requirements.
1.1.3 Exclusions
This standard does not apply to:
• Support equipment, such as air conditioning, fire detection or fire extinguishing systems
• Power supply systems, such as motor-generator sets, battery backup systems and transformers, which are not an integral
part of the equipment
• Building installation wiring
• Devices requiring no electrical power
100
Technical Specification
Access Cabinet System. Load Test Reference – 08022008_A4788
Product Part Number:
Product Description:
Test Date:
Test Agency:
Supervised By:
Test Procedure:
Acceptance:
Results:
A4288C
Access Cabinet - 42U x 31.5” (800mm) wide x 35” (875mm) deep
8th February 2008
Speedy Lifting Gear Hire
Avon Trading Estate
St Philips Bristol
BS2 0XA
Mr C M Wright
Engineering Manager
Cooper B-Line Ltd
The 42U Access rack was fitted with 12 full depth shelves;
each shelf was loaded with five (5) 44 lb. (20kg) test weights. Total weight 2425 lbs. (1100kg).
The enclosure is to be loaded evenly with a weight to simulate a fully
loaded enclosure. The unit must support 2200 lbs. (1000kg) static load.
The Access cabinet was loaded with the full range of test weights
available providing a static load of 2425 lbs. (1100kg).
• 340 lbs. (750kg) No deformation.
• 2200 lbs. (1000kg) Slight deformation 0.078” (2mm) to the ends of the (AA8) cross rail.
• 2200 lbs. (1000kg) No further deformation.
101
Access Configurator
“Probably the best FREE
tool you will ever use”
The Access Configurator software
has been developed to provide a
unique method of assisting with the
design, configuration and layout of
the Access Cabinet Range.
It allows the user to construct a
cabinet to their own specification by
using a building block approach to
select cabinet components from the
many options available.
The software includes a library of
standard accessories that can be placed
into a rack layout screen, which provides
a useful equipment ‘U position’ layout
guide. This layout can then be displayed
in the 3D model giving an excellent
visualization of a populated rack.
Once the user has built their ‘virtual
rack’, they are able to visualize the
design by using a fully interactive 3D
model. A snapshot of the model can
then be saved as an image file for
use with reports or for later reference.
•
•
•
•
•
•
•
•
•
As well as providing a detailed
breakdown of each component used,
the software also builds up a convenient
master part number with a full
description of all items used. This
information can then be read by the
report generator to provide a detailed
quote or customer enquiry complete
with images previously generated in
the configuration screen.
Cabinet configuration
Cabinet layout
Visualization of final cabinet build
Quotations
Allows for tailored cabinet build
to specification
Equipment and accessories can
be shown in position
Final cabinet image can be
viewed on screen
Image can be saved to file
View orientation can be modified
Once a configuration is finished it can
be easily stored and retrieved as a
project file. There is also a useful
contact database for storing client
information.
Once the selection is made, the final
results are displayed in the interactive
3D model shown opposite.
A preferred ‘snapshot’ of the resulting
picture can then be saved as an image
file.
Order Ref: CBLC
102
Index
Part Number
Page
Part Number
Page
Part Number
Page
A2261C1CGSPPPVB . . . . . . . . . . 6
A2261C1CGSPPPVBK . . . . . . . . 6
A2266C1CGSPPNVB . . . . . . . . . . 6
A2266C1CGSPPNVBK . . . . . . . . 6
A2266XXCX . . . . . . . . . . . . . . . . . . 39
A3969XXCX . . . . . . . . . . . . . . . . . . 39
A3981C1CGSPPPVB . . . . . . . . . . 7
A3981C1CGSPPPVBK . . . . . . . . 7
A3981XXCX . . . . . . . . . . . . . . . . . . 39
A3986C1CGSPPNVB . . . . . . . . . . 7
A4282COLOC2B . . . . . . . . . . . . .
A4282COLOC2BK . . . . . . . . . . . .
A4282COLOC3B . . . . . . . . . . . . .
A4282COLOC3BK . . . . . . . . . . . .
A4282XXCX . . . . . . . . . . . . . . . . . .
A2269C1CGSPPXVB . . . . . . . . . .
A2269C1CGSPPXVBK . . . . . . . .
A2281C1CGSPPPVB . . . . . . . . . .
A2281C1CGSPPPVBK . . . . . . . .
A2286C1CGSPPNVB . . . . . . . . . .
6
6
7
7
7
A3986C1CGSPPNVBK . . . . . . . . 7
A3986XXCX . . . . . . . . . . . . . . . . . . 39
A3989C1CGSPPXVB . . . . . . . . . . 7
A3989C1CGSPPXVBK . . . . . . . . 7
A3989XXCX . . . . . . . . . . . . . . . . . . 39
A4286AMDFB . . . . . . . . . . . . . 10-11
A4286AMDFBK . . . . . . . . . . . . 10-11
A4286C1CGSPPNVB . . . . . . . . . . 7
A4286C1CGSPPNVBK . . . . . . . . 7
A4286DB . . . . . . . . . . . . . . . . . . 14-15
A2286C1CGSPPNVBK . . . . . . . . 7
A2286XXCX . . . . . . . . . . . . . . . . . . 39
A2289C1CGSPPXVB . . . . . . . . . . 7
A2289C1CGSPPXVBK . . . . . . . . 7
A2761C1CGSPPPVB . . . . . . . . . . 6
A4261C1CGSPPPVB . . . . . . . . . . 6
A4261C1CGSPPPVBK . . . . . . . . 6
A4261C1CVVPPPVB . . . . . . . . 8-9
A4261C1CVVPPPVBK . . . . . . . 8-9
A4261COLOC2B . . . . . . . . . . . . . 12
A4286DBK . . . . . . . . . . . . . . . . . 14-15
A4286EB . . . . . . . . . . . . . . . . . . 14-15
A4286EBK . . . . . . . . . . . . . . . . . 14-15
A4286XXCX . . . . . . . . . . . . . . . . . . 39
A4288COLOC2B . . . . . . . . . . . . . 12
A2761C1CGSPPPVBK . . . . . . . . 6
A2761C1CVVPPPVB . . . . . . . . 8-9
A2761C1CVVPPPVBK . . . . . . . 8-9
A2761XXCX . . . . . . . . . . . . . . . . . . 39
A2762C1CVVPPPVB . . . . . . . . 8-9
A4261COLOC2BK . . . . . . . . . . . . 12
A4261XXCX . . . . . . . . . . . . . . . . . . 39
A4262C1CVVPPPVB . . . . . . . . 8-9
A4262C1CVVPPPVBK . . . . . . . 8-9
A4262COLOC2B . . . . . . . . . . . . . 12
A4288COLOC2BK . . . . . . . . . . . . 12
A4288COLOC3B . . . . . . . . . . . . . 12
A4288COLOC3BK . . . . . . . . . . . . 12
A4289AMDFB . . . . . . . . . . . . . 10-11
A4289AMDFBK . . . . . . . . . . . . 10-11
A2762C1CVVPPPVBK . . . . . . . 8-9
A2766C1CGSPPNVB . . . . . . . . . . 6
A2766C1CGSPPNVBK . . . . . . . . 6
A2766XXCX . . . . . . . . . . . . . . . . . . 39
A2769C1CGSPPXVB . . . . . . . . . . 6
A4262COLOC2BK . . . . . . . . . . . . 12
A4262XXCX . . . . . . . . . . . . . . . . . . 39
A4266C1CGSPPNVB . . . . . . . . . . 6
A4266C1CGSPPNVBK . . . . . . . . 6
A4266XXCX . . . . . . . . . . . . . . . . . . 39
A4289C1CGSPPXVB . . . . . . . . . . 7
A4289C1CGSPPXVBK . . . . . . . . 7
A4289C1CVVPPXVB . . . . . . . . 8-9
A4289C1CVVPPXVBK . . . . . . . 8-9
A4289DB . . . . . . . . . . . . . . . . . . 14-15
A2769C1CGSPPXVBK . . . . . . . . 6
A2769C1CVVPPXVB . . . . . . . . 8-9
A2769C1CVVPPXVBK . . . . . . . 8-9
A2769XXCX . . . . . . . . . . . . . . . . . . 39
A2781C1CGSPPPVB . . . . . . . . . . 7
A4268COLOC2B . . . . . . . . . . . . . 12
A4268COLOC2BK . . . . . . . . . . . . 12
A4269C1CGSPPXVB . . . . . . . . . . 6
A4269C1CGSPPXVBK . . . . . . . . 6
A4269C1CVVPPXVB . . . . . . . . 8-9
A4289DBK . . . . . . . . . . . . . . . . . 14-15
A4289EB . . . . . . . . . . . . . . . . . . 14-15
A4289EBK . . . . . . . . . . . . . . . . . 14-15
A4289XXCX . . . . . . . . . . . . . . . . . . 39
A4561XXCX . . . . . . . . . . . . . . . . . . 39
A2781C1CGSPPPVBK . . . . . . . . 7
A2781C1CVVPPPVB . . . . . . . . 8-9
A2781C1CVVPPPVBK . . . . . . . 8-9
A2782C1CVVPPPVB . . . . . . . . 8-9
A2782C1CVVPPPVBK . . . . . . . 8-9
A4269C1CVVPPXVBK . . . . . . . 8-9
A4269XXCX . . . . . . . . . . . . . . . . . . 39
A4281AMDFB . . . . . . . . . . . . . 10-11
A4281AMDFBK . . . . . . . . . . . . 10-11
A4281C1CGSPPPVB . . . . . . . . . . 7
A4562XXCX
A4566XXCX
A4569XXCX
A4581XXCX
A4582XXCX
A2786C1CGSPPNVB . . . . . . . . . . 7
A2786C1CGSPPNVBK . . . . . . . . 7
A2789C1CGSPPXVB . . . . . . . . . . 7
A2789C1CGSPPXVBK . . . . . . . . 7
A2789C1CVVPPXVB . . . . . . . . 8-9
A4281C1CGSPPPVBK . . . . . . . . 7
A4281C1CVVPPPVB . . . . . . . . 8-9
A4281C1CVVPPPVBK . . . . . . . 8-9
A4281COLOC2B . . . . . . . . . . . . . 12
A4281COLOC2BK . . . . . . . . . . . . 12
A4586XXCX . . . . . . . . . . . . . . . . . . 39
A4589XXCX . . . . . . . . . . . . . . . . . . 39
A4761C1CGSPPPVB . . . . . . . . . . 6
A4761C1CGSPPPVBK . . . . . . . . 6
A4761C1CVVPPPVB . . . . . . . . 8-9
A2789C1CVVPPXVBK . . . . . . . 8-9
A3961C1CGSPPPVB . . . . . . . . . . 6
A3961C1CGSPPPVBK . . . . . . . . 6
A3961XXCX . . . . . . . . . . . . . . . . . . 39
A3966C1CGSPPNVB . . . . . . . . . . 6
A4281COLOC3B . . . . . . . . . . . . . 12
A4281COLOC3BK . . . . . . . . . . . . 12
A4281DB . . . . . . . . . . . . . . . . . . 14-15
A4281DBK . . . . . . . . . . . . . . . . . 14-15
A4281EB . . . . . . . . . . . . . . . . . . 14-15
A4761C1CVVPPPVBK . . . . . . . 8-9
A4761COLOC2B . . . . . . . . . . . . . 13
A4761COLOC2BK . . . . . . . . . . . . 13
A4761XXCX . . . . . . . . . . . . . . . . . . 39
A4762C1CVVPPPVB . . . . . . . . 8-9
A3966C1CGSPPNVBK . . . . . . . . 6
A3966XXCX . . . . . . . . . . . . . . . . . . 39
A3969C1CGSPPXVB . . . . . . . . . . 6
A3969C1CGSPPXVBK . . . . . . . . 6
A4281EBK . . . . . . . . . . . . . . . . . 14-15
A4281XXCX . . . . . . . . . . . . . . . . . . 39
A4282C1CVVPPPVB . . . . . . . . 8-9
A4282C1CVVPPPVBK . . . . . . . 8-9
A4762C1CVVPPPVBK . . . . . . . 8-9
A4762COLOC2B . . . . . . . . . . . . . 13
A4762COLOC2BK . . . . . . . . . . . . 13
A4762XXCX . . . . . . . . . . . . . . . . . . 39
103
..................
..................
..................
..................
..................
12
12
12
12
39
39
39
39
39
39
Index
Part Number
Page
Part Number
Page
Part Number
Page
A4766C1CGSPPNVB . . . . . . . . . . 6
A4766C1CGSPPNVBK . . . . . . . . 6
A4766XXCX . . . . . . . . . . . . . . . . . . 39
A4769C1CGSPPXVB . . . . . . . . . . 6
A4769C1CGSPPXVBK . . . . . . . . 6
A4789COLOC3B . . . . . . . . . . . . . 13
A4789COLOC3BK . . . . . . . . . . . . 13
A4789DB . . . . . . . . . . . . . . . . . . 14-15
A4789DBK . . . . . . . . . . . . . . . . . 14-15
A4789EB . . . . . . . . . . . . . . . . . . 14-15
A8FP124
A8FP141
A8FP142
A8FP143
A8FP144
......................
43
43
43
43
43
A4769C1CVVPPXVB . . . . . . . . 8-9
A4769C1CVVPPXVBK . . . . . . . 8-9
A4769COLOC2B . . . . . . . . . . . . . 13
A4769COLOC2BK . . . . . . . . . . . . 13
A4769XXCX . . . . . . . . . . . . . . . . . . 39
A4789EBK . . . . . . . . . . . . . . . . . 14-15
A4789XXCX . . . . . . . . . . . . . . . . . . 39
A6FP61 . . . . . . . . . . . . . . . . . . . . . . . 43
A6FP62 . . . . . . . . . . . . . . . . . . . . . . . 43
A6FP63 . . . . . . . . . . . . . . . . . . . . . . . 43
A8FT . . . . . . . . . . . . . . . . . . . . . . . . . .
A8FT3 . . . . . . . . . . . . . . . . . . . . . . . . .
A8FTECM . . . . . . . . . . . . . . . . . . . . .
A8PD3U110FT . . . . . . . . . . . . . . . .
A8PD3U220FT . . . . . . . . . . . . . . . .
47
47
47
55
55
A4781AMDFB . . . . . . . . . . . . . 10-11
A4781AMDFBK . . . . . . . . . . . . 10-11
A4781C1CGSPPPVB . . . . . . . . . . 7
A4781C1CGSPPPVBK . . . . . . . . 7
A4781C1CVVPPPVB . . . . . . . . 8-9
A6FP64
A6FP91
A6FP92
A6FP93
A6FP94
43
43
43
43
43
A8PDBP1U . . . . . . . . . . . . . . . . . . .
A8PDBP2U . . . . . . . . . . . . . . . . . . .
AA8 . . . . . . . . . . . . . . . . . . . . . . . . . . .
AACSCB1215 . . . . . . . . . . . . . . . . .
AACSCB1230 . . . . . . . . . . . . . . . . .
55
55
41
23
23
A4781COLOC2B . . . . . . . . . . . . . 13
A4781COLOC2BK . . . . . . . . . . . . 13
A4781COLOC3B . . . . . . . . . . . . . 13
A4781COLOC3BK . . . . . . . . . . . . 13
A4781C1CVVPPPVBK . . . . . . . 8-9
A6FP101
A6FP102
A6FP103
A6FP104
A6FP121
......................
43
43
43
43
43
AACSCB1815 . . . . . . . . . . . . . . . . .
AACSCB1830 . . . . . . . . . . . . . . . . .
AACSCC06STB . . . . . . . . . . . . . . .
AACSCC08STB . . . . . . . . . . . . . . .
AACSCC09STB . . . . . . . . . . . . . . .
23
23
22
22
22
A4781XXCX . . . . . . . . . . . . . . . . . . 39
A4781DB . . . . . . . . . . . . . . . . . . 14-15
A4781DBK . . . . . . . . . . . . . . . . . 14-15
A4781EB . . . . . . . . . . . . . . . . . . 14-15
A4781EBK . . . . . . . . . . . . . . . . . 14-15
A6FP122
A6FP123
A6FP124
A6FP141
A6FP142
......................
AACSRP1203APCLB
AACSRP1203SPCLB
AACSRP1203FPCLB
AACSRP1206APCLB
AACSRP1206SPCLB
.........
......................
43
43
43
43
43
22
23
22
22
23
A4782C1CVVPPPVB . . . . . . . . 8-9
A4782C1CVVPPPVBK . . . . . . . 8-9
A4782COLOC2B . . . . . . . . . . . . . 13
A4782COLOC2BK . . . . . . . . . . . . 13
A4782COLOC3B . . . . . . . . . . . . . 13
A6FP143 . . . . . . . . . . . . . . . . . . . . . .
A6FP144 . . . . . . . . . . . . . . . . . . . . . .
A6FT . . . . . . . . . . . . . . . . . . . . . . . . . .
A6FT3 . . . . . . . . . . . . . . . . . . . . . . . . .
A6FTECM . . . . . . . . . . . . . . . . . . . . .
43
43
47
47
47
AACSRP1206FPCLB
AACSRP1208APCLB
AACSRP1208SPCLB
AACSRP1208FPCLB
AACSRP1209APCLB
.........
A4782COLOC3BK . . . . . . . . . . . . 13
A4782XXCX . . . . . . . . . . . . . . . . . . 39
A4786AMDFB . . . . . . . . . . . . . 10-11
A4786AMDFBK . . . . . . . . . . . . 10-11
A4786DB . . . . . . . . . . . . . . . . . . 14-15
A6PD3U110FT . . . . . . . . . . . . . . . .
A6PD3U220FT . . . . . . . . . . . . . . . .
A6PDBP1U . . . . . . . . . . . . . . . . . . .
A6PDBP2U . . . . . . . . . . . . . . . . . . .
A8FP61 . . . . . . . . . . . . . . . . . . . . . . .
55
55
55
55
43
AACSRP1209SPCLB
AACSRP1209FPCLB
AACSRP1X03FPCLB
AACSRP1X06FPCLB
AACSRP1X08FPCLB
.........
A4786DBK . . . . . . . . . . . . . . . . . 14-15
A4786EB . . . . . . . . . . . . . . . . . . 14-15
A4786EBK . . . . . . . . . . . . . . . . . 14-15
A4786C1CGSPPNVB . . . . . . . . . . 7
A4786C1CGSPPNVBK . . . . . . . . 7
A8FP62
A8FP63
A8FP64
A8FP91
A8FP92
AACSRP1X09FPCLB
AACSRP1803APCLB
AACSRP1803SPCLB
AACSRP1806APCLB
AACSRP1806SPCLB
.........
.......................
43
43
43
43
43
A4786XXCX . . . . . . . . . . . . . . . . . . 39
A4789AMDFB . . . . . . . . . . . . . 10-11
A4789AMDFBK . . . . . . . . . . . . 10-11
A4789C1CGSPPXVB . . . . . . . . . . 7
A4789C1CGSPPXVBK . . . . . . . . 7
A8FP93 . . . . . . . . . . . . . . . . . . . . . . .
A8FP94 . . . . . . . . . . . . . . . . . . . . . . .
A8FP101 . . . . . . . . . . . . . . . . . . . . . .
A8FP102 . . . . . . . . . . . . . . . . . . . . . .
A8FP103 . . . . . . . . . . . . . . . . . . . . . .
43
43
43
43
43
AACSRP1808APCLB
AACSRP1808SPCLB
AACSRP1809APCLB
AACSRP1809SPCLB
AACSSD4212NLCLB
.........
.........
22
23
22
23
23
A4789C1CVVPPXVB . . . . . . . . 8-9
A4789C1CVVPPXVBK . . . . . . . 8-9
A4789COLOC2B . . . . . . . . . . . . . 13
A4789COLOC2BK . . . . . . . . . . . . 13
A8FP104
A8FP121
A8FP122
A8FP123
43
43
43
43
AACSSD4218NLCLB . . . . . . . . .
AACSSD4712NLCLB . . . . . . . . .
AACSSD4718NLCLB . . . . . . . . .
AAD276B . . . . . . . . . . . . . . . . . . . . .
23
23
23
49
.......................
.......................
.......................
.......................
.......................
......................
......................
......................
......................
......................
......................
......................
.......................
.......................
.......................
.......................
......................
......................
......................
......................
104
......................
......................
......................
......................
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
.........
22
22
23
22
22
23
22
22
22
22
22
22
23
22
23
Index
Part Number
Page
AAD278B
AAD396B
AAD398B
AAD426B
AAD428B
.....................
AAD476B
AAD478B
ABD276B
ABD278B
ABD396B
.....................
ABD398B
ABD426B
ABD428B
ABD476B
ABD478B
.....................
Part Number
Page
Part Number
Page
49
49
49
49
49
ACTRW47 . . . . . . . . . . . . . . . . . . . .
ACVBPA426 . . . . . . . . . . . . . . . . . .
ACVBPA428 . . . . . . . . . . . . . . . . . .
ACVBPA476 . . . . . . . . . . . . . . . . . .
ACVBPA478 . . . . . . . . . . . . . . . . . .
66
78
79
78
79
AFR2UCT-4B . . . . . . . . . . . . . . . . .
AFWA2AS . . . . . . . . . . . . . . . . . . . .
AFWA3AS . . . . . . . . . . . . . . . . . . . .
AFWA6AS . . . . . . . . . . . . . . . . . . . .
AFWA12AS . . . . . . . . . . . . . . . . . . .
73
41
41
41
41
49
49
49
49
49
ACVT2230B
ACVT2240B
ACVT2260B
ACVT2280B
ACVT3930B
...................
67
67
67
67
67
AGD226BAS
AGD228BAS
AGD276BAS
AGD278BAS
AGD396BAS
..................
50
50
50
50
50
ACVT3940B
ACVT3960B
ACVT3980B
ACVT4230B
ACVT4240B
...................
67
67
67
67
67
AGD398BAS
AGD426BAS
AGD428BAS
AGD476BAS
AGD478BAS
..................
.....................
49
49
49
49
49
ACBBBPB . . . . . . . . . . . . . . . . . . . . .
ACBBDAB . . . . . . . . . . . . . . . . . . . .
ACBBF606B . . . . . . . . . . . . . . . . . .
ACBBF610B . . . . . . . . . . . . . . . . . .
ACBBF612B . . . . . . . . . . . . . . . . . .
45
45
44
44
44
ACVT4260B
ACVT4280B
ACVT4730B
ACVT4740B
ACVT4760B
...................
AHFD276BAS
AHFD278BAS
AHFD426BAS
AHFD428BAS
AHFD476BAS
.................
...................
67
67
67
67
67
ACBBF614B
ACBBF806B
ACBBF810B
ACBBF812B
ACBBF814B
ACVT4780B . . . . . . . . . . . . . . . . . . .
ADGD396BAS . . . . . . . . . . . . . . . .
ADGD398BAS . . . . . . . . . . . . . . . .
ADGD426BAS . . . . . . . . . . . . . . . .
ADGD428BAS . . . . . . . . . . . . . . . .
67
51
51
51
51
AHFD478BAS
AHGD276BAS
AHGD278BAS
AHGD426BAS
AHGD428BAS
.................
..................
44
44
44
44
44
................
51
51
51
51
51
ACBBPPB . . . . . . . . . . . . . . . . . . . . .
ACBBSFDB . . . . . . . . . . . . . . . . . . .
ACCSK06B . . . . . . . . . . . . . . . . . . .
ACCSK08B . . . . . . . . . . . . . . . . . . .
ACCT100 . . . . . . . . . . . . . . . . . . . . .
45
45
67
67
70
ADGD476BAS
ADGD478BAS
ADSD396BAS
ADSD398BAS
ADSD426BAS
................
51
51
53
53
53
AHGD476BAS . . . . . . . . . . . . . . . .
AHGD478BAS . . . . . . . . . . . . . . . .
AJF . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AMP61 . . . . . . . . . . . . . . . . . . . . . . . .
AMP61JF . . . . . . . . . . . . . . . . . . . . .
51
51
42
42
42
ACCT170 . . . . . . . . . . . . . . . . . . . . .
ACH6 . . . . . . . . . . . . . . . . . . . . . . . . .
ACH8 . . . . . . . . . . . . . . . . . . . . . . . . .
ACK . . . . . . . . . . . . . . . . . . . . . . . . . . .
ACT396 . . . . . . . . . . . . . . . . . . . . . . .
70
71
71
42
50
ADSD428BAS . . . . . . . . . . . . . . . .
ADSD476BAS . . . . . . . . . . . . . . . .
ADSD478BAS . . . . . . . . . . . . . . . .
AEAP2AS . . . . . . . . . . . . . . . . . . . . .
AEAP3AS . . . . . . . . . . . . . . . . . . . . .
53
53
53
41
41
AMP62 . . . . . . . . . . . . . . . . . . . . . . . .
AMP62JF . . . . . . . . . . . . . . . . . . . . .
AMP64 . . . . . . . . . . . . . . . . . . . . . . . .
AMP64JF . . . . . . . . . . . . . . . . . . . . .
AMP66 . . . . . . . . . . . . . . . . . . . . . . . .
42
42
42
42
42
ACT398
ACT426
ACT428
ACT476
ACT478
.......................
50
50
50
50
50
AEB . . . . . . . . . . . . . . . . . . . . . . . . . . .
AFD226BAS . . . . . . . . . . . . . . . . . .
AFD228BAS . . . . . . . . . . . . . . . . . .
AFD276BAS . . . . . . . . . . . . . . . . . .
AFD278BAS . . . . . . . . . . . . . . . . . .
82
50
50
50
50
AMP66JF . . . . . . . . . . . . . . . . . . . . .
AMP69 . . . . . . . . . . . . . . . . . . . . . . . .
AMP69JF . . . . . . . . . . . . . . . . . . . . .
AMP81 . . . . . . . . . . . . . . . . . . . . . . . .
AMP81JF . . . . . . . . . . . . . . . . . . . . .
42
42
42
42
42
ACTR22
ACTR27
ACTR39
ACTR42
ACTR47
.......................
66
66
66
66
66
AFD396BAS
AFD398BAS
AFD426BAS
AFD428BAS
AFD476BAS
..................
50
50
50
50
50
AMP82 . . . . . . . . . . . . . . . . . . . . . . . .
AMP82JF . . . . . . . . . . . . . . . . . . . . .
AMP84 . . . . . . . . . . . . . . . . . . . . . . . .
AMP84JF . . . . . . . . . . . . . . . . . . . . .
AMP86 . . . . . . . . . . . . . . . . . . . . . . . .
42
42
42
42
42
66
66
66
66
AFD478BAS
AFR2UCT-1B
AFR2UCT-2B
AFR2UCT-3B
..................
50
73
73
73
AMP86JF . . . . . . . . . . . . . . . . . . . . .
AMP89 . . . . . . . . . . . . . . . . . . . . . . . .
AMP89JF . . . . . . . . . . . . . . . . . . . . .
AMSB . . . . . . . . . . . . . . . . . . . . . . . . .
42
42
42
62
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
..................
..................
..................
..................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
.......................
ACTRW22
ACTRW27
ACTRW39
ACTRW42
....................
....................
....................
....................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
................
................
................
................
..................
..................
..................
..................
.................
.................
.................
105
..................
..................
..................
..................
..................
..................
..................
..................
.................
.................
.................
.................
................
................
................
50
50
50
50
50
51
51
51
51
51
Index
Part Number
Page
APKCPK
APSP226
APSP271
APSP276
APSP279
......................
APSP391
APSP396
APSP399
APSP421
APSP422
.....................
APSP424
APSP426
APSP429
APSP471
APSP472
.....................
Part Number
Page
Part Number
Page
42
48
48
48
48
ATPBSK . . . . . . . . . . . . . . . . . . . . . . .
ATPEBS6 . . . . . . . . . . . . . . . . . . . . .
ATPEBS7 . . . . . . . . . . . . . . . . . . . . .
ATPEBS8 . . . . . . . . . . . . . . . . . . . . .
ATP I 6 . . . . . . . . . . . . . . . . . . . . . . . .
46
46
46
46
46
AVM47T . . . . . . . . . . . . . . . . . . . . . . .
AVPD426B . . . . . . . . . . . . . . . . . . . .
AVPD428B . . . . . . . . . . . . . . . . . . . .
AVPD476B . . . . . . . . . . . . . . . . . . . .
AVPD478B . . . . . . . . . . . . . . . . . . . .
40
54
54
54
54
48
48
48
48
48
ATP I
ATP I
ATP I
ATP I
ATP I
69 . . . . . . . . . . . . . . . . . . . . . . .
7 ........................
79 . . . . . . . . . . . . . . . . . . . . . . .
8 ........................
89 . . . . . . . . . . . . . . . . . . . . . . .
46
46
46
46
46
AVRD426B . . . . . . . . . . . . . . . . . . . .
AVRD428B . . . . . . . . . . . . . . . . . . . .
AVRD476B . . . . . . . . . . . . . . . . . . . .
AVRD478B . . . . . . . . . . . . . . . . . . . .
AVSD226BAS . . . . . . . . . . . . . . . . .
54
54
54
54
52
.....................
48
48
48
48
48
ATPV6 . . . . . . . . . . . . . . . . . . . . . . . .
ATPV7 . . . . . . . . . . . . . . . . . . . . . . . .
ATPV8 . . . . . . . . . . . . . . . . . . . . . . . .
AUHL . . . . . . . . . . . . . . . . . . . . . . . . . .
AUHLFR . . . . . . . . . . . . . . . . . . . . . .
46
46
46
85
85
AVSD228BAS
AVSD276BAS
AVSD278BAS
AVSD396BAS
AVSD398BAS
.................
52
52
52
52
52
APSP474 . . . . . . . . . . . . . . . . . . . . .
APSP476 . . . . . . . . . . . . . . . . . . . . .
APSP479 . . . . . . . . . . . . . . . . . . . . .
ASB600 . . . . . . . . . . . . . . . . . . . . . . .
ASD226BAS . . . . . . . . . . . . . . . . . .
48
48
48
41
53
AUHLFRR . . . . . . . . . . . . . . . . . . . . .
AUHLR . . . . . . . . . . . . . . . . . . . . . . . .
AVCMA39U100B . . . . . . . . . . . . .
AVCMA39U170B . . . . . . . . . . . . .
AVCMA42U100B . . . . . . . . . . . . .
85
85
68
68
68
AVSD426BAS . . . . . . . . . . . . . . . . .
AVSD428BAS . . . . . . . . . . . . . . . . .
AVSD476BAS . . . . . . . . . . . . . . . . .
AVSD478BAS . . . . . . . . . . . . . . . . .
AVSP226 . . . . . . . . . . . . . . . . . . . . . .
52
52
52
52
48
ASD228BAS
ASD276BAS
ASD278BAS
ASD396BAS
ASD398BAS
..................
53
53
53
53
53
AVCMA42U170B
AVCMA47U100B
AVCMA47U170B
AVCMA39U260B
AVCMA39U330B
.............
68
68
68
69
69
AVSP271
AVSP276
AVSP279
AVSP391
AVSP396
......................
48
48
48
48
48
ASD426BAS
ASD428BAS
ASD476BAS
ASD478BAS
ATD226BAS
..................
53
53
53
53
53
AVCMA39U400B
AVCMA42U260B
AVCMA42U300B
AVCMA42U400B
AVCMA47U260B
.............
AVSP399
AVSP421
AVSP422
AVSP424
AVSP426
......................
.............
69
69
69
69
69
ATD228BAS
ATD276BAS
ATD278BAS
ATD396BAS
ATD398BAS
..................
AVCMA47U300B . . . . . . . . . . . . .
AVCMA47U400B . . . . . . . . . . . . .
AVM22 . . . . . . . . . . . . . . . . . . . . . . . .
AVM22RCM . . . . . . . . . . . . . . . . . . .
AVM22T . . . . . . . . . . . . . . . . . . . . . . .
69
69
40
40
40
AVSP429
AVSP471
AVSP472
AVSP474
AVSP476
......................
..................
53
53
53
53
53
......................
48
48
48
48
48
ATD426BAS . . . . . . . . . . . . . . . . . .
ATD428BAS . . . . . . . . . . . . . . . . . .
ATD476BAS . . . . . . . . . . . . . . . . . .
ATD478BAS . . . . . . . . . . . . . . . . . .
ATP6 . . . . . . . . . . . . . . . . . . . . . . . . . .
53
53
53
53
46
AVM27 . . . . . . . . . . . . . . . . . . . . . . . .
AVM27RCM . . . . . . . . . . . . . . . . . . .
AVM27T . . . . . . . . . . . . . . . . . . . . . . .
AVM32 . . . . . . . . . . . . . . . . . . . . . . . .
AVM32RCM . . . . . . . . . . . . . . . . . . .
40
40
40
40
40
AVSP479 . . . . . . . . . . . . . . . . . . . . . .
AWSD226BAS . . . . . . . . . . . . . . . .
AWSD228BAS . . . . . . . . . . . . . . . .
AWSD276BAS . . . . . . . . . . . . . . . .
AWSD278BAS . . . . . . . . . . . . . . . .
48
52
52
52
52
ATP62 . . . . . . . . . . . . . . . . . . . . . . . . .
ATP63 . . . . . . . . . . . . . . . . . . . . . . . . .
ATP7 . . . . . . . . . . . . . . . . . . . . . . . . . .
ATP8 . . . . . . . . . . . . . . . . . . . . . . . . . .
ATP82 . . . . . . . . . . . . . . . . . . . . . . . . .
47
47
46
46
47
AVM32T . . . . . . . . . . . . . . . . . . . . . . .
AVM39 . . . . . . . . . . . . . . . . . . . . . . . .
AVM39RCM . . . . . . . . . . . . . . . . . . .
AVM39T . . . . . . . . . . . . . . . . . . . . . . .
AVM42 . . . . . . . . . . . . . . . . . . . . . . . .
40
40
40
40
40
AWSD396BAS
AWSD398BAS
AWSD426BAS
AWSD428BAS
AWSD476BAS
................
52
52
52
52
52
ATP83 . . . . . . . . . . . . . . . . . . . . . . . . .
ATPBS6 . . . . . . . . . . . . . . . . . . . . . . .
ATPBS7 . . . . . . . . . . . . . . . . . . . . . . .
ATPBS8 . . . . . . . . . . . . . . . . . . . . . . .
47
46
46
46
AVM42RCM . . . . . . . . . . . . . . . . . . .
AVM42T . . . . . . . . . . . . . . . . . . . . . . .
AVM47 . . . . . . . . . . . . . . . . . . . . . . . .
AVM47RCM . . . . . . . . . . . . . . . . . . .
40
40
40
40
AWSD478BAS . . . . . . . . . . . . . . . .
AZD396B . . . . . . . . . . . . . . . . . . . . .
AZD398B . . . . . . . . . . . . . . . . . . . . .
AZD426B . . . . . . . . . . . . . . . . . . . . .
52
52
52
52
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
.....................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
..................
.............
.............
.............
.............
.............
.............
.............
106
.................
.................
.................
.................
......................
......................
......................
......................
......................
......................
......................
......................
......................
......................
......................
................
................
................
................
48
48
48
48
48
Index
Part Number
Page
Part Number
Page
Part Number
Page
AZD428B . . . . . . . . . . . . . . . . . . . . .
AZD476B . . . . . . . . . . . . . . . . . . . . .
AZD478B . . . . . . . . . . . . . . . . . . . . .
BTK . . . . . . . . . . . . . . . . . . . . . . . . . . .
CBLPF27U-1 . . . . . . . . . . . . . . . . . .
52
52
52
85
77
E2SHKBS2U1921 . . . . . . . . . . . .
E2SHKBS2U1924 . . . . . . . . . . . .
E2SHKBS2U1930 . . . . . . . . . . . .
E2SHKBS23 . . . . . . . . . . . . . . . . . .
E2SHKBSLPM19 . . . . . . . . . . . . .
57
57
57
56
56
IBIPPSU . . . . . . . . . . . . . . . . . . . . . .
IBOX3F_22 . . . . . . . . . . . . . . . . . . .
IBOX3F_27 . . . . . . . . . . . . . . . . . . .
IBOX3F_39 . . . . . . . . . . . . . . . . . . .
IBOX3F_42 . . . . . . . . . . . . . . . . . . .
87
94
94
94
94
CBLPF27U-10BR . . . . . . . . . . . . .
CBLPFBR . . . . . . . . . . . . . . . . . . . . .
CBLPFHP . . . . . . . . . . . . . . . . . . . . .
CBLPFSRRT . . . . . . . . . . . . . . . . . .
CR39 . . . . . . . . . . . . . . . . . . . . . . . . . .
77
77
77
77
56
E2SHKBSLPM23 . . . . . . . . . . . . .
E2SHKBSR1U1921 . . . . . . . . . . .
E2SHKBSR1U1924 . . . . . . . . . . .
E2SHKBSR1U1930 . . . . . . . . . . .
E2SHP4P1920 . . . . . . . . . . . . . . . .
56
57
57
57
58
IBOX3F_47
IBOX3R_22
IBOX3R_27
IBOX3R_39
IBOX3R_42
...................
94
94
94
94
94
CR45 . . . . . . . . . . . . . . . . . . . . . . . . . .
CR58 . . . . . . . . . . . . . . . . . . . . . . . . . .
CR62 . . . . . . . . . . . . . . . . . . . . . . . . . .
CTM17 . . . . . . . . . . . . . . . . . . . . . . . .
E2FA1920315AC . . . . . . . . . . . . .
56
56
56
71
63
E2SHP4P1924
E2SHP4P1930
E2SHP4P1936
E2SHP4P1942
E2SHP4P2320
IBOX3R_47
IBOX4F_22
IBOX4F_27
IBOX4F_39
IBOX4F_42
...................
................
58
58
58
58
58
E2FA1920500AC
E2FA1924315AC
E2FA1924500AC
E2FA1930315AC
E2FA1930500AC
.............
63
63
63
63
63
E2SHP4P2324 . . . . . . . . . . . . . . . .
E2SHP4P2330 . . . . . . . . . . . . . . . .
E2SHP4P2336 . . . . . . . . . . . . . . . .
E2SHP4P2342 . . . . . . . . . . . . . . . .
E2SHSS1920 . . . . . . . . . . . . . . . . .
58
58
58
58
58
IBOX4F_47
IBOX4R_22
IBOX4R_27
IBOX4R_39
IBOX4R_42
...................
...................
94
94
94
94
94
E2FA2320315AC
E2FA2320500AC
E2FA2324315AC
E2FA2324500AC
E2FA2330315AC
.............
.............
63
63
63
63
63
E2SHSS1924
E2SHSS1930
E2SHSS1936
E2SHSS1942
E2SHSS2320
.................
58
58
58
58
58
IBOX4R_47 . . . . . . . . . . . . . . . . . . .
IBOXAPL . . . . . . . . . . . . . . . . . . . . . .
IBOXAR . . . . . . . . . . . . . . . . . . . . . . .
IBOXCARD . . . . . . . . . . . . . . . . . . .
IBOXDC . . . . . . . . . . . . . . . . . . . . . . .
94
89
91
89
90
E2FA2330500AC . . . . . . . . . . . . .
E2MACMR3BLP . . . . . . . . . . . . . .
E2SHCLSLP1915P . . . . . . . . . . .
E2SHHP4P1920 . . . . . . . . . . . . . .
E2SHHP4P1924 . . . . . . . . . . . . . .
63
71
56
58
58
E2SHSS2324 . . . . . . . . . . . . . . . . .
E2SHSS2330 . . . . . . . . . . . . . . . . .
E2SHSS2336 . . . . . . . . . . . . . . . . .
E2SHSS2342 . . . . . . . . . . . . . . . . .
EVM39E . . . . . . . . . . . . . . . . . . . . . .
58
58
58
58
40
IBOXFOB . . . . . . . . . . . . . . . . . . . . .
IBOXFX . . . . . . . . . . . . . . . . . . . . . . .
IBOXHTS . . . . . . . . . . . . . . . . . . . . .
IBOXLCS . . . . . . . . . . . . . . . . . . . . .
IBOXLS . . . . . . . . . . . . . . . . . . . . . . .
89
91
90
90
90
E2SHHP4P1930
E2SHHP4P1936
E2SHHP4P1942
E2SHHP4P2320
E2SHHP4P2324
..............
58
58
58
58
58
EVM42E . . . . . . . . . . . . . . . . . . . . . .
EVM47E . . . . . . . . . . . . . . . . . . . . . .
FCT88 . . . . . . . . . . . . . . . . . . . . . . . . .
HD2BFP95B . . . . . . . . . . . . . . 17,
HD3UCTB . . . . . . . . . . . . . . . . . . . . .
40
40
74
19
16
IBOXMFTL . . . . . . . . . . . . . . . . . . . .
IBOXPIRS . . . . . . . . . . . . . . . . . . . . .
IBOXPDU1612WC1316C . . . . .
IBOXPDU1612WC1316C . . . . .
IBOXSB . . . . . . . . . . . . . . . . . . . . . . .
92
91
95
96
91
E2SHHP4P2330 . . . . . . . . . . . . . .
E2SHHP4P2336 . . . . . . . . . . . . . .
E2SHHP4P2342 . . . . . . . . . . . . . .
E2SHHSS1920 . . . . . . . . . . . . . . .
E2SHHSS1924 . . . . . . . . . . . . . . .
58
58
58
58
58
HD3UCTEB . . . . . . . . . . . . . . . . . . .
HD420905C8CYSP1NNB . . . .
HD470905C8CYSP1NNB . . . .
HDBKB . . . . . . . . . . . . . . . . . . . . 17,
HDFAS1U45B . . . . . . . . . . . . . . . . .
16
16
16
19
61
IBOXSDU . . . . . . . . . . . . . . . . . . . . .
IBOXSEC . . . . . . . . . . . . . . . . . . . . .
IBOXSHELF . . . . . . . . . . . . . . . . . .
IBOXSMBK . . . . . . . . . . . . . . . . . . .
IBOXSW . . . . . . . . . . . . . . . . . . . . . .
91
91
97
91
92
E2SHHSS1930
E2SHHSS1936
E2SHHSS1942
E2SHHSS2320
E2SHHSS2324
...............
58
58
58
58
58
HDFAS1U65B . . . . . . . . . . . . . . . . .
HDFASWS1U45B . . . . . . . . . . . . .
HDFASWS1U65B . . . . . . . . . . . . .
HDPDSP425B . . . . . . . . . . . . 17,
HDPDSP475B . . . . . . . . . . . . 17,
61
61
61
19
19
IBOXTCS . . . . . . . . . . . . . . . . . . . . .
IBOXTS . . . . . . . . . . . . . . . . . . . . . . .
IBOXVS . . . . . . . . . . . . . . . . . . . . . . .
IMP22 . . . . . . . . . . . . . . . . . . . . . 41,
IMP27 . . . . . . . . . . . . . . . . . . . . . 41,
90
90
91
62
62
E2SHHSS2330 . . . . . . . . . . . . . . .
E2SHHSS2336 . . . . . . . . . . . . . . .
E2SHHSS2342 . . . . . . . . . . . . . . .
E2SHKBS19 . . . . . . . . . . . . . . . . . .
58
58
58
56
HF19DU2UB . . . . . . . . . . . . . . . . . .
HF19DU3UB . . . . . . . . . . . . . . . . . .
HF420905CYSP1NNB . . . . . . . .
HF470905CYSP1NNB . . . . . . . .
19
19
18
18
IMP32
IMP39
IMP42
IMP47
.............
.............
.............
.............
.............
.............
.............
..............
..............
..............
..............
...............
...............
...............
...............
................
................
................
................
.................
.................
.................
.................
107
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
...................
62
41, 62
41, 62
41, 62
.........................
.....................
.....................
.....................
94
94
94
94
94
Index
Part Number
Page
IPAL1F_22
IPAL1F_27
IPAL1F_39
IPAL1F_42
IPAL1F_47
....................
IPAL1R_22
IPAL1R_27
IPAL1R_39
IPAL1R_42
IPAL1R_47
....................
IPAL2F_22
IPAL2F_27
IPAL2F_39
IPAL2F_42
IPAL2F_47
....................
IPAL2R_22
IPAL2R_27
IPAL2R_39
IPAL2R_42
IPAL2R_47
....................
Part Number
Page
Part Number
Page
93
93
93
93
93
RMHPFU120 . . . . . . . . . . . . . . . . . .
RMHPFU230 . . . . . . . . . . . . . . . . . .
SAM61 . . . . . . . . . . . . . . . . . . . . . . . .
SAM61JF . . . . . . . . . . . . . . . . . . . . .
SAM62 . . . . . . . . . . . . . . . . . . . . . . . .
80
80
43
43
43
SB87023S3FB . . . . . . . . . . . . . . . .
SBHB119K . . . . . . . . . . . . . . . . . . . .
SBVB36 . . . . . . . . . . . . . . . . . . . . . . .
SBVB36K . . . . . . . . . . . . . . . . . . . . .
SBVB72 . . . . . . . . . . . . . . . . . . . . . . .
73
83
84
84
84
93
93
93
93
93
SAM62JF . . . . . . . . . . . . . . . . . . . . .
SAM64 . . . . . . . . . . . . . . . . . . . . . . . .
SAM64JF . . . . . . . . . . . . . . . . . . . . .
SAM66 . . . . . . . . . . . . . . . . . . . . . . . .
SAM66JF . . . . . . . . . . . . . . . . . . . . .
43
43
43
43
43
SBVB72K . . . . . . . . . . . . . . . . . . . . .
SDFAS1U45B . . . . . . . . . . . . . . . . .
SESBP1U3QFB . . . . . . . . . . . . . . .
SESBP1U4QFB . . . . . . . . . . . . . . .
SESBP1U5QFB . . . . . . . . . . . . . . .
84
61
76
76
76
93
93
93
93
93
SAM69 . . . . . . . . . . . . . . . . . . . . . . . .
SAM69JF . . . . . . . . . . . . . . . . . . . . .
SAM81 . . . . . . . . . . . . . . . . . . . . . . . .
SAM81JF . . . . . . . . . . . . . . . . . . . . .
SAM82 . . . . . . . . . . . . . . . . . . . . . . . .
43
43
43
43
43
SESBP2U3QFB
SESBP2U4QFB
SESBP2U5QFB
SESBP5U3QFB
SESBP5U4QFB
...............
76
76
76
76
76
....................
93
93
93
93
93
SAM82JF . . . . . . . . . . . . . . . . . . . . .
SAM84 . . . . . . . . . . . . . . . . . . . . . . . .
SAM84JF . . . . . . . . . . . . . . . . . . . . .
SAM86 . . . . . . . . . . . . . . . . . . . . . . . .
SAM86JF . . . . . . . . . . . . . . . . . . . . .
43
43
43
43
43
SESBP5U5QFB . . . . . . . . . . . . . . .
TLCMS . . . . . . . . . . . . . . . . . . . . . . . .
TLCMR . . . . . . . . . . . . . . . . . . . . . . . .
TLCMEF . . . . . . . . . . . . . . . . . . . . . .
TLCMFP . . . . . . . . . . . . . . . . . . . . . .
76
74
74
74
74
IPALACARD . . . . . . . . . . . . . . . . . .
IPALBL . . . . . . . . . . . . . . . . . . . . . . . .
IPALBK . . . . . . . . . . . . . . . . . . . . . . . .
IPALCARD . . . . . . . . . . . . . . . . . . . .
IPALEXTL . . . . . . . . . . . . . . . . . . . . .
87
87
87
87
87
SAM89 . . . . . . . . . . . . . . . . . . . . . . . .
SAM89JF . . . . . . . . . . . . . . . . . . . . .
SB57903 . . . . . . . . . . . . . . . . . . . . . .
SB57904 . . . . . . . . . . . . . . . . . . . . . .
SB7171933C . . . . . . . . . . . . . . . . . .
43
43
83
83
72
UAECEK
82
IPALGY . . . . . . . . . . . . . . . . . . . . . . .
IVU3L . . . . . . . . . . . . . . . . . . . . . . . . .
IVU3L1 . . . . . . . . . . . . . . . . . . . . . . . .
IVU3LB . . . . . . . . . . . . . . . . . . . . . . . .
IVU3L1B . . . . . . . . . . . . . . . . . . . . . .
87
81
81
81
81
SB7171946C . . . . . . . . . . . . . . . . . .
SB7171946O . . . . . . . . . . . . . . . . .
SB719191 . . . . . . . . . . . . . . . . . . . . .
SB719192L . . . . . . . . . . . . . . . . . . .
SB719192XL . . . . . . . . . . . . . . . . . .
72
72
72
72
72
IVU6L . . . . . . . . . . . . . . . . . . . . . . . . .
IVU6L1 . . . . . . . . . . . . . . . . . . . . . . . .
IVU6LB . . . . . . . . . . . . . . . . . . . . . . . .
IVU6L1B . . . . . . . . . . . . . . . . . . . . . .
PPS1UQFB . . . . . . . . . . . . . . . . . . .
81
81
81
81
77
SB719194XL . . . . . . . . . . . . . . . . . .
SB719231 . . . . . . . . . . . . . . . . . . . . .
SB719232L . . . . . . . . . . . . . . . . . . .
SB719232XL . . . . . . . . . . . . . . . . . .
SB719234XL . . . . . . . . . . . . . . . . . .
72
72
72
72
72
PPS2UQFB . . . . . . . . . . . . . . . . . . .
PPS5UQFB . . . . . . . . . . . . . . . . . . .
QRSV 45 . . . . . . . . . . . . . . . . . . . . . .
QRSV 65 . . . . . . . . . . . . . . . . . . . . . .
QRSV 75 . . . . . . . . . . . . . . . . . . . . . .
77
77
59
59
59
SB7251x0 . . . . . . . . . . . . . . . . .
SB72558x5 . . . . . . . . . . . . . . .
SB7261x8 . . . . . . . . . . . . . . . . .
SB72658x4 . . . . . . . . . . . . . . .
SB72758x6 . . . . . . . . . . . . . . .
19,
19,
19,
19,
19,
75
75
75
75
75
QRSV23 45 . . . . . . . . . . . . . . . . . . .
QRSV23 65 . . . . . . . . . . . . . . . . . . .
QRSV23 75 . . . . . . . . . . . . . . . . . . .
QRTSV 45 . . . . . . . . . . . . . . . . . . . .
QRTSV 65 . . . . . . . . . . . . . . . . . . . .
59
59
59
60
60
SB72834x6 . . . . . . . . . . . . . . . 19,
SB8607SPFB . . . . . . . . . . . . . . . . .
SB862CSM . . . . . . . . . . . . . . . . . . .
SB862PIF . . . . . . . . . . . . . . . . . . . . .
SB87019S1FB . . . . . . . . . . . . 19,
75
19
19
19
73
QRTSV 75 . . . . . . . . . . . . . . . . . . . .
QRTSV23 45 . . . . . . . . . . . . . . . . . .
QRTSV23 65 . . . . . . . . . . . . . . . . . .
QRTSV23 75 . . . . . . . . . . . . . . . . . .
60
60
60
60
SB87019S2FB
SB87019S3FB
SB87023S1FB
SB87023S2FB
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
....................
19, 73
19, 73
. . . . . . . . . . . . . . . . 73
. . . . . . . . . . . . . . . . 73
............
............
108
...............
...............
...............
...............
......................
Global Locations
Cooper B-Line’s U.S. Customer Service
Center is staffed Monday through Friday from
7 a.m. to 5:00 p.m. Central Standard Time.
If a situation requires that you have to contact
us after hours, please leave a message via
phone or E-mail so we can give it immediate
attention the following business day.
Service Facility - Canada:
Cooper B-Line - Canada
Div. of Cooper Ind. Canada, Inc.
5925 McLaughlin Road
Mississauga, ON L5R 1B8
Canada
Phone: (800) 569-3660
Fax: (888) 753-3355
Email: [email protected]
Service Facility - United States:
Cooper B-Line - USA
509 West Monroe Street
Highland, IL 62249
United States
Phone: (800) 851-7415
Fax: (800) 356-1438
Email: [email protected]
Service Facility - Europe:
Cooper B-Line, Ltd. - UK
Walrow, Highbridge
Somerset, TA9 4AQ
United Kingdom
Phone: + 44 (0) 1278 783371
Fax: + 44 (0) 1278 789037
Email: [email protected]
Cooper B-Line - Saudi Arabia:
PO Box 70160 - Al Khobar - 31952
Kingdom of Saudi Arabia
Phone: 00966 3 812 2236
Fax: 00966 3 812 1291
Email: [email protected]
Literature Fulfillment Questions:
Phone: (314) 426-1800
Fax: (314) 426-6022
Email: [email protected]
Request Literature Website:
http://order.repcographics.com/cooperb/
Cooper B-Line
509 West Monroe Street
Highland, IL 62249
Phone: 800-851-7415
Fax: 618-654-1917
www.cooperbline.com
Cooper Industries, Plc.
600 Travis, Ste. 5600
Houston, TX 77002-1001
Phone: 713-209-8400
www.cooperindustries.com
© 2011 Cooper B-Line, Inc.
ACSUS-11
Printed in U.S.A.
10311

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project