toilet systems. - Pieces de bateau

toilet systems. - Pieces de bateau
www.transatmarine.com
LIGHTING
1
ELECTRICAL / ELECTRONICS
21
APPLIANCES / SANITATION
107
MAINTENANCE
137
BOATING PARTS & ACCESSORIES
153
ROPE / MOORING / ANCHORING
193
BOATS / MOTORS
223
GIFTWARE
229
RIGGING HARDWARE
247
SAILING
281
2015
Lighting
1
AQUA SIGNAL
2
LUNASEA
6
NAVISAFE
14
PLUG LIGHT
20
RIGID INDUSTRIES
18
Lighting
2
Aqua Signal
Aqua Signal
20 Series Navigation Lights
Aqua Signal 20 Series
Bi-Colour Navigation Light
▪▪Polycarbonate black body/lens
▪▪Screw-in pedestal base
▪▪For vessels under 12 m (39.4 ft)
▪▪2 mile visibility
▪▪White 12V-5W
▪▪Diameter: 2.4"
▪▪Polycarbonate black body/lens
▪▪Screw-in base
▪▪For vessels under 12 m (39.4 ft)
▪▪2 mile visibility
▪▪Horizontal mount
▪▪H: 2" x W: 1.9" x D: 2.5"
Fixed
AQS 20100-7
AQS 20040-7
Parts:
Height: 4"
AQS 90496-7
Bulb 12V
Folding
AQS 20180-7
Height: 18"
Bulbs:
AQS 90496-7
12V/5W, inc.(pr) (BA9s)
N
Aqua Signal
27 Series Portable Navigation Lights
W
E
▪▪Waterproof, floating design
▪▪Tough double O-ring seal and shock resistant
rubber housing with rubber booted on-off switch
▪▪Requires 4 "AA" batteries, not included
▪▪Vessels under 7 meters
▪▪Length: 5.44"
Part
Function
Mount
AQS 27400-7
Bi-Colour - Red/Green
Suction cup, C-clamp with Inflatable adapter
AQS 27440-7
All-Round - White
24” pole with clamp/
u-bracket, suction cup and inflatable adapter
Aqua Signal 25 Series Navigation Lights
25100-7
25404-7
▪▪Rigid, non-magnetic polycarbonate black body/lens and
stainless steel side skirts
▪▪For vessels under 12 m (39.4 ft)
▪▪2 mile visibility
Function
Light
Mount
HxWxD
AQS 25100-7
Part
Bi-Colour
Red/Green
AQS 90200-7, 10W
Bulb (12V)
AQS 90201-7, 10W
Bulb (24V)
Vertical
2.9" x 2.5" x 2.28"
AQS 25200-7
Side Light - Starboard
Green
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25300-7
Side Light - Port
Red
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25400-7
Masthead
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Mast
2.9" x 2.5" x 2.28"
AQS 25500-7
Stern
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.9" x 2.5" x 2.28"
AQS 25000-7
All-Round
White
AQS 90200-7, 10W
AQS 90201-7, 10W
Vertical
2.95" x 2.4"
AQS 25404-7
Masthead/Deck
White
AQS 90203-7 †, 10W
AQS 90470-7, 10W
Mast
5.45" x 7" x 2.4"
N/A
† Bulb for newer (post 2011) 25 series lights.
A visual identification of the fixture bulb is neccessary for proper replacement.(See spare bulbs below)
Parts:
AQS 25410-1
AQS 25902-1
AQS 25903-1
AQS 90470-7
Masthead lens, black
S-25 deck bracket
Mast bracket
12V/20W, ser-25 bay halogen (BA9s)
90200-7
90203-7
3
Aqua Signal
Aqua Signal
32 Series Navigation Lights
▪▪Quicfit lights allow easy dismantling for transport or storage
▪▪Polycarbonate, seawater resistant, UV protected, non-corrosive,
non-magnetic, shock resistant
▪▪For vessels under 20 m (65')
▪▪2 mile visibility
32410-7
Style
Description
Lighting
Part #
32706-7
Size
AQS 32410-7**
Masthead/Anchor
White, 4 W mast, 1.5 W anchor
4" x 3.8"
AQS 32706-7**
Tri-Colour/Anchor
Red/Green/White, 4 W mast, 1.5 W anchor
6.1" x 3.8"
** Limited Quantities
W
E
N
Aqua Signal
33 Series Navigation Lights
▪▪Completely sealed and waterproof with IP66,
IP67, IP68 testing and certification
▪▪Absolutely maintenance free
▪▪Long lifetime and low power consumption (0.18A)
▪▪Nearly identical footprint to series 31 & 32
generation LED's
▪▪12 volt DC applications
▪▪For vessels under 20 meters (65.6')
▪▪2 mile visibility
▪▪Horizontal mount
▪▪H: 2" x W: 2.68" x D: 1.7"
▪▪Bi-colour H: 1.18" x W: 3.1"
AQS 33202-7Starboard
AQS 33302-7Port
AQS 33502-7Stern
AQS 33100-7Bi-colour
Aqua Signal
34 Series Navigation - Quicfit Light
▪▪Red/Green/White 1.9W, mast/anchor 1W
▪▪For vessels under 20 m (65.6 ft.)
▪▪Visibility: 2 nautical miles, masthead 3 miles
▪▪Volts: 12 or 24V Draw: 0.18-0.54A @ 12V
▪▪Completely sealed and waterproof
▪▪Tested and certified for electromagnetic
interference
▪▪Vertical mount
▪▪Case Material: Polycarbonate
▪▪Fits 40 series mounts
▪▪H: 5.5" x Dia: 3.5"
▪▪Warranty: 3 years
33202-7
33302-7
33502-7
AQS 34706-7
33100-7
Aqua Signal 40 Series Navigation Lights
▪▪Rigid, nonmagnetic polycarbonate body/lens and
stainless steel side skirts
▪▪For vessels under 20 m (65.6 ft.)
▪▪2 mile visibility
40100-7
Part
40700-7
40000-7
40400-7
Function
Description
12V Bulb
24V Bulbs
AQS 40100-7
Bi-Colour
Red/Green 25W
ANC 529340, 25W
ANC 529341, 25W
AQS 40000-7
All-Round
White, 10W
ANC 529343, 10W
ANC 529341, 25W
33600-7
Mount
Housing
HxWxD
Vertical
Black
5.1” x 3.5” x 3.1”
Horizontal
Black
4.98" x 3.5"
AQS 40400-7
Masthead
White, 10W
ANC 529343, 10W
ANC 529344, 10W
Vertical
Black
5.1” x 3.5” x 3.1”
AQS 40600-7
Tri-Colour
Red/Green/White, 25W
ANC 529340, 25W
ANC 529341, 25W
Deck/Mast
Black
4.98" x 3.5"
AQS 40700-7
Tri-Colour/
Anchor
Red/Green/White, 25-10W
ANC 529340, 25W
ANC 529343, 10W
ANC 529341, 25W
ANC 529344, 10W
Deck/Mast
Black
8.7" x 3.5"
AQS 42411-1**
Masthead/
Anchor
White, 25W & 10W
ANC 529340, 25W
ANC 529343, 10W
ANC 529341, 25W
ANC 529344, 10W
Deck
White
9.1” x 3.5”
** Limited Quantities
Parts:
AQS 40710-1
AQS 40030-1
Tri anchor lens
All-Round clear lens only
4
Aqua Signal
Aqua Signal 40 Sailboat Navigation Lights - Quicfits
40706-7
40806-7
Lighting
▪▪Equipped with Aqua Signal Quicfits system for easy dismantling for the
purpose of transport and winter storage
▪▪Rigid, nonmagnetic polycarbonate body/lens and stainless steel side skirts
▪▪For vessels under 20 m (65.6 ft.)
▪▪2 mile visibility
Part
Function
Description
12V Bulb
40606-7
24V Bulb
Mount
Housing
HxWxD
ANC 529341, 25W
Deck/Mast
Black
6.5" x 3.5"
AQS 40606-7
Tri-Colour/
Anchor
Red/Green/White,
25W
ANC 529340, 25W
ANC 529343, 10W
AQS 90005-7, 10W
AQS 40706-7
Tri-Colour/
Anchor
Red/Green/White,
25-10W
ANC 529340, 25W
ANC 529343, 10W
AQS 90005-7, 10W
ANC 529341, 25W
ANC 529344, 10W
Deck/Mast
Black
10.35" x 3.5"
AQS 40806-7
Tri-Colour/
Anchor/Strobe
Red/Green/White,
25-10-8W
ANC 529340, 25W
ANC 529343, 10W
AQS 90005-7, 10W
ANC 529341, 25W
ANC 529344, 10W
Deck/Mast
Black
10.35" x 3.5"
Parts:
AQS 40710-1
Tri-Colour lens
Aqua Signal 41 Series Navigation Lights
▪▪Powerboat/Sailboat 12V, 25W/10W
▪▪Rigid polycarbonate black body/lens
▪▪Comes with self adhesive gasket used as a drilling template
▪▪Screws included
▪▪For vessels under 20 m (65.6 ft.)
▪▪Visibility: 2 nautical miles, masthead 3 miles
Part
41100-7
Function
Light
AQS 41100-7
Bi-Colour
Red/Green
ANC 529340, 25W
AQS 41200-7
Side Light - Starboard
Green
AQS 41300-7
Side Light - Port
AQS 41400-7
41300-7
41400-7
41500-7
Size HxWxD
ANC 529341, 25W
AQS 90003-7, 25W
Vertical
4.1" x 3.6" x 3.2"
ANC 529340, 25W
ANC 529341, 25W
AQS 90003-7, 25W
Horizontal
4.1" x 3.6" x 3.2"
Red
ANC 529340, 25W
ANC 529341, 25W
AQS 90003-7, 25W
Horizontal
4.1" x 3.6" x 3.2"
Masthead
White
ANC 529343, 10W
AQS 90005-7, 10W
ANC 529344, 10W
Vertical
4.1" x 3.6" x 3.2"
AQS 41404-1
Masthead/Foredeck
White
ANC 529343, 10W
AQS 90005-7, 10W
ANC 529344, 10W
Vertical
8.3" x 5.3"
AQS 41500-7
Stern
White
ANC 529343, 10W
AQS 90005-7, 10W
ANC 529344, 10W
Vertical
4.1" x 3.6" x 3.2"
Spare Bulbs:
AQS 90002-7
AQS 90005-7
AQS 90177-7
AQS 90234-7
AQS 90282-7
12V/25W, double contact index base
12V/10W, series 40 halogen
12V/10W series 15 festoon
12V/20W series 25 halogen
12V/5W series 15 halogen
Spare Parts:
AQS 41410-1
Masthead/stern replacement lens
24V Bulb
41404-1
Mount
Aqua Signal Bulbs and Spare Parts
12V Bulb
41200-7
Aqua Signal
Watertight Docking Lights
Stainless steel, watertight (IP67),
shock-resistant, non-corrosive and non-magnetic halogen lights
(bulbs included).
▪▪2-wire mount
▪▪Watertight gaskets
▪▪50W, 12V
▪▪Fastners included
▪▪4.25" x 7.75"
AQS 85104-7 Pair
Parts:
Use any MR16 style replacement bulb
Aqua Signal
5
Aqua Signal
Gaborone Interior Light
W
E
▪▪Flexible arm allows for wide range of motion
throughout chart table spaces. Equipped with both
white and red LED light to maintain night vision.
▪▪Housing material: 12” flexible steel tubing with
black plastic mounting bracket
▪▪Voltage: 12V
▪▪Wattage: 9W (white), 4W (red)
▪▪Length: 39.7 cm
▪▪Fasteners included
AQS 16500-7
AQS 16541-7
Aqua Signal
Bamako Overhead Light
Aqua Signal
Exterior Floodlght
▪▪Round headliner light
▪▪Can be surface mounted or recessed into headliner
for flexibility
▪▪Housing is ABS plastic, with chrome plastic finish
▪▪Utilizes 12 LED warm white diodes
▪▪12 volt, 12 watt, 0.20 amp
▪▪3.25” diameter
▪▪Fasteners included
▪▪6" oval 60 LED deck light
▪▪Low amp draw: 12V, 0.4 amps
▪▪Swivel mount
▪▪High strength plastic chrome housing
▪▪Powder coated aluminum bracket
▪▪6-3/8" x 2-1/4"
AQS 86500-7**
**Limited Quantities
AQS 16520-7
Aqua Signal
Maputo Cabin Lights
▪▪Multipurpose light
▪▪White plastic construction with a clear lens
▪▪Has 3-position rocker switch to control both
red and/or white LED lights
▪▪16” x 4.45” x 1”
▪▪Surface mounted
▪▪12 volt, 0.50 amps
AQS 16530-7Red/white
AQS 16531-7White/white
Aqua Signal
Colombo Dome Light
▪▪Three position rocker switch (On/Off/Red)
▪▪21 "Warm" white & 9 red LED's
▪▪Low amp draw: 0.14 amp White; 0.08 Red
▪▪12VDC
▪▪5-1/2" x 1-1/16"
AQS 16601-7
Aqua Signal
Vertical Watertight Plug Connect
Can also be used for accessories on the mast,
for easy connection of conductors when mast is
stepped or removed.
▪▪5-pin horizontal plug connector
▪▪Polycarbonate, shock resistant, non-corrosive,
nonmagnetic, seawater resistant
▪▪4.06” x 1.73”
AQS 392800-2
Aqua Signal
Horizontal Watertight Plug Connect
Can also be used for accessories on the mast, for easy
connection of conductors when mast is stepped or removed.
▪▪5-pin horizontal plug connector
▪▪Polycarbonate, shock resistant, non-corrosive,
nonmagnetic, seawater resistant
▪▪4.09” x 2.24”
AQS 80100-7
Stainless steel
Aqua Signal Wireless Remote System
Aqua Signal
Vienna Multi-Purpose Light
▪▪White plastic construction
▪▪Push lens, on/off switch
▪▪Surface or flush mount
▪▪Amp draw: 6 watt
▪▪12VDC
▪▪W: 5” x H: 3” x D: 1”
▪▪Fasteners included
AQS 16610-7
A low cost assurance for late night boarding. With
an operating range of 50’ you can control a light for
entrance/exit safety.
▪▪Weatherproof receiver
▪▪Floatable transmitter fob
▪▪Works on 12V applications
▪▪Switches a max. of 10 amps
AQS 17100-7
Lighting
▪▪Warm white light for living and work spaces
▪▪Includes illuminated switch for easy switching in dark areas
▪▪Dimensions L: 15.25" x W: 2.75" x D: 0.875"
▪▪Housing made from aluminum and white plastic
▪▪12/24V
▪▪Low amp draw 0.36 amp @12V
N
Aqua Signal
Malabo Surface Mount Light
The World’s Most
Advanced Lighting
Functional & Eco-Friendly
Lunasea Lighting's technology uses
revolutionary microprocessor controlled
circuitry that is based on 25 years of
research and development. These
systems provide energy-efficient,
dimmable lighting for the marine industry.
LED Fixtures
LLB-28
Colregs Certified
LED Lighting and Accessories:
• Natural Illumination
• More Light with Less Power
• Direct Replacements for Halogen Fixtures
• Multi-Function Switches
• 100% Dimming Capability
LED Navigation Lights
Colregs Certified
Engine Room Light - Ignition Proof:
• 1400 Lumens of soft flood light ths is only .75
inches thick.
• Available in White or White/Red, White/Blue.
“NEW”
1400 Lumen
Ignition Proof
Lunasea Lighting's state of the art design
systems are easy to install and easy to
upgrade. Best of all, they offer top-value
lighting solutions that will meet or exceed
your expectations.
Slim Line Bar Light
www.LunaseaLighting.com
LED Floodlights and
Spreader Lights
Courtesy Light
Lunasea
N
Lunasea
G4 Bulb
7
W
E
Lunasea
G4 Bulbs
▪▪Water tight Silicone Encapsulated G4 LED
▪▪Large on light but soft on the eyes
▪▪Takes up only 15 x 43mm of space
▪▪Equal to a 20W incandescent
▪▪12VDC ONLY
▪▪3 watt
LUN LLB-21TC-21-00 Side pin, Cool White, 190 lumen, each
LUN LLW-21TC-21-00 Side pin, Cool White, 190 lumen, 10 bulk
LUN LLB-21HC-61-00
LUN LLB-21HW-61-00
LUN LLB-21TW-21-00 Side pin, Warm White, 170 lumen, each
LUN LLW-21TW-21-00 Side pin, Warm White, 170 lumen, 10 bulk
Lunasea
G4 Bulbs
LUN LLB-21UC-21-00 Back pin, Cool White, 190 lumen, each
LUN LLB-21UW-21-00 Back pin, Warm White, 170 lumen, each
LUN LLW-21UW-21-00 Back pin, Warm White, 170 lumen, 10 bulk
▪▪15 LED
▪▪Bottom pin
▪▪1.3 watt
▪▪10-30VDC
LUN LLB-21FW-61-00
LUN LLW-21FW-61-00
Lunasea
G4 Bulb
Warm White, 89 lumen, each
Warm White, 89 lumen, 10 bulk
▪▪Side pin
▪▪Switch between 12 warm white & 3 red
▪▪10-30VDC
Lunasea
G4 Bulb
LUN LLB-21V3-81-AS
▪▪18 LED
▪▪Bottom pin
▪▪3.5 watt
▪▪10-30VDC
LunaSea
Adaptor Bases
LUN LLB-21EW-21-00
▪▪1/pkg
Warm White, 255 lumen
Lunasea
G4 Bulb
▪▪21 LED
▪▪High output with a buck regulator circuit
▪▪Excellent viewing angles
▪▪3.2 watt
▪▪10-30VDC
Warm White, 92 lumen
Lunasea
G4 Bulbs
LUN LLB-26EC-21-00
Cool White, 288 lumen
LUN LLB-26EW-21-00
Warm White, 252 lumen
Lunasea
Mini BA9S Bulbs
▪▪9 LED
▪▪G4 side pin
▪▪120° viewing angle
▪▪1.2 watt
▪▪10-30VDC
LUN LLB-216C-21-00
LUN LLB-216W-21-00
BA15S Single Contact Base to G4
BA15D Double Contact Base to G4
BAY15D Indexing Dual Contact Base to G4
E26 Base to G4 or MR16
Lunasea
Bayonet BA15D Bulbs
▪▪3 LED
▪▪G4 back pin
▪▪OD: of 24mm (.95 inch)
▪▪40,000 hour life
▪▪1.8W
▪▪10-30VDC
LUN LLB-214W-21-00
LUN LLB-44AG-01-00
LUN LLB-44BG-01-00
LUN LLB-44DG-01-00
LUN LLB-44EE-01-00
▪▪6 LED
▪▪360°
LUN LLB-246C-61-00
LUN LLB-246W-61-00
Cool White, 60 lumen
Warm White, 55 lumen
Cool White, 130 lumen
Warm White, 120 lumen
Lunasea
Mini T10 Wedge Bulb
▪▪15 LED
▪▪360°
▪▪10-16VDC, 1.3 watt
▪▪High output with a buck regulator circuit
LUN LLB-23FC-61-00
LUN LLB-23FW-61-00
Cool White, 93 lumen
Warm White, 89 lumen
Lighting
Cool White, 200 lumen
Warm White, 200 lumen
▪▪10 LED
▪▪G4 side or back pin
▪▪2.0 watt
▪▪10-30VDC
Lighting
8
Lunasea
Lunasea
Bayonet BA15S / BA15D Bulbs
Lunasea
Festoon Bulbs
▪▪9 LED
▪▪10-30VDC, 2 watt
▪▪Can be double-sided taped into place
▪▪12 LED
▪▪360° viewing angle
▪▪40,000 hour life
▪▪1 watt
▪▪10-30VDC
LUN LLB-229R-21-00
LUN LLB-229W-21-00
Red, BA15S
Warm White, BA15S, 149 lumen
LUN LLB-269R-21-00
LUN LLB-269W-21-00
Red, BA15D
Warm White, BA15D, 149 lumen
Lunasea
Bayonet BA15D Bulbs
▪▪18 LED bulb with cover is for general purpose use
▪▪Low energy consumption compared with
incandescent bulbs
▪▪Wide 360 degree viewing angle
▪▪10-30VDC, 1 watt
LUN LLB-18LC-21-00
LUN LLB-18LW-21-00
LUN LLB-18LR-21-00
LUN LLB-19LW-21-00
Lunasea
Festoon Bulbs
LUN LLB-26FC-21-00
Cool White, 105 lumens, each
▪▪9 LED
▪▪Wide 270° viewing angle
▪▪50,000 hour life
▪▪10-30VDC, 2 watt
▪▪42mm
LUN LLB-26FW-21-00
LUN LLW-26FW-21-00
Warm White, 75 lumens, each
Warm White, 75 lumens, 10 bulk
LUN LLB-189C-21-00
LUN LLB-189W-21-00
Lunasea
Bayonet BA15S Bulbs
Lunasea
Barrel Bulb
▪▪18 LED bulb with cover is for general purpose use
▪▪Low energy consumption compared with
incandescent bulbs
▪▪Wide 360 degree viewing angle
▪▪10-30VDC, 1 watt
▪▪30 LED
▪▪Festoon dimpled
▪▪360° viewing
▪▪10-30VDC, 3.25 watt
LUN LLB-22FC-21-00
LUN LLB-22FW-21-00
Cool White, 105 lumen
Warm White, 75 lumen
Lunasea
Festoon Bulbs
LUN LLB-31HC-71-00 Cool White, 160 lumens
Warm White, 141 lumens
Cool White, 210 lumen
Lunasea
MR11 Bulb
▪▪10 LED
▪▪120° viewing angle
▪▪50,000 hour
▪▪10-30VDC, 2.2 watt
▪▪4 LED
▪▪Wide 120° viewing angle
▪▪10-30VDC, .07 watt
▪▪Length: 31mm
LUN LLB-202C-21-00
LUN LLB-202W-21-00
Cool White, 42 mm, 84 lumens
Warm White, 42 mm, 60 lumens
Red, 42 mm
Warm White, 37 mm, 60 lumens
LUN LLB-11TW-61-00
Cool White, 72 lumen
Warm White, 60 lumen
Lunasea
Festoon Bulbs
▪▪6 LED
▪▪Wide 120° viewing angle
▪▪40,000 hour life
▪▪10-30VDC, 1.5 watt
LUN LLB-186C-21-00 Cool White, 107 lumen, 42mm, each
LUN LLB-186W-21-00 Warm White, 97 lumen, 42mm, each
LUN LLW-186W-21-00 Warm White, 97 lumen, 42mm, 10 bulk
LUN LLB-196W-21-00 Warm White, 97 lumen, 37mm, each
Warm White, 140 lumen
Lunasea
MR16 Bulb
▪▪3 LED
▪▪External aluminum housing with internal copper heat conductor
▪▪12VDC, 5 watt
LUN LLB-16NW-61-00
Warm White, 290 lumen
9
Lunasea
Natural White, 850 lumen
N
W
E
▪▪Remote phosphor technology
▪▪7W, IP20 E26/27 screw base
▪▪Single high power LED, warm white bulb
▪▪All glass cover
▪▪360 degree viewing angle
▪▪50,000 Hour Life
▪▪12VDC ONLY
LUN LLB-48EP-21-00
Warm White, 540 lumen
Lunasea
E26 Screw Bulb
▪▪5W, IP20 E26/27 screw base 6 LED warm
white bulb
▪▪Replaces 40W incandescent, saving 80%
energy
▪▪360 degree viewing angle
▪▪380 Lumens
▪▪50,000 Hour Life
▪▪12VDC ONLY
▪▪Aluminum base and plastic covering
LUN LLB-48EW-01-00
Warm White, 420 lumen
NEW
Improved Design
Now Smaller with Excellent Viewing Angles
More Intensity with Superior Lumens
▪▪Rated at 2 nautical miles
▪▪Encapsulated to completely protect from the elements
▪▪High output with a precision buck regulator circuit
▪▪Keeps working if one of the LED's should fail
▪▪Aqua Signal 40 or 41 series replacements
▪▪Excellent viewing angles
▪▪10-30VDC, 2 watt
▪▪Lifetime Warranty
Shown Installed
Lunasea
E26 Screw Bulb
Lunasea
Navigation Single Colour Bulbs
LUN LLB-28NG-24-SD
LUN LLB-28NR-24-SD
LUN LLB-28NW-24-SD**
Green, BA15D
Red, BA15D
White, BA15D
LUN LLB-28NG-24-SY
LUN LLB-28NR-24-SY
LUN LLB-28NW-24-SY**
Green, BAY15D
Red, BAY15D
White, BAY15D
**Certified USCG COLREG 72 & ABYC-A16
Lunasea
Navigation Tri-Colour Bulb
Three individual precision buck regulator circuits. If by a rare
chance one of the LEDs fails, it will continue to drive the
remaining LEDs with flawless control. This is especially important
in fixtures that are hard to access.
▪▪Rated at 2 nautical miles
▪▪Encapsulated to completely protect from the
elements
▪▪High intensity, superior lumen maintenance
▪▪Aqua Signal 40 or 41 series replacements
▪▪Excellent viewing angles
▪▪10-30VDC, 2 watt
▪▪Lifetime Warranty
LUN LLB-28NT-24-00
BAY15D
Lunasea
Navigation Bi-Colour Bulbs
Two individual precision buck regulator circuits. If by a rare chance
one of the LEDs fails, it will continue to drive the remaining LEDs
with flawless control. This is especially important in fixtures that
are hard to access.
▪▪Rated at 2 nautical miles
▪▪Encapsulated to completely protect from the elements
▪▪High intensity, superior lumen maintenance
▪▪Excellent viewing angles
▪▪Aqua Signal 40 or 41 series replacements
▪▪10-30VDC, 2.5 watts
▪▪Lifetime Warranty
▪▪*Note: LLB-28NB24-10 is for inverted fixtures
(flipped 180°)
LUN LLB-28NB-24-00
LUN LLB-28NB-24-10
BAY15D, series 40
BAY15D, series 41
Lighting
LUN LLB-55NN-81-00
W
E
Spreader/Foredeck LED offers superior light
output, long life and requires only 13W of
power. It's 38 degree beam places the light
where you want it. Replaces 50W sealed beam
with extra light to spare having
the equivalent light output of
75W.
▪▪12 / 24VDC, 13 watt
▪▪IP67 waterproof
N
Lunasea
Par 36 Replacement Bulb
Lighting
10
Lunasea
Lunasea
Navigation Festoon Bulbs
Lunasea LED
Recessed Lights
▪▪Rated at 2 nautical miles
▪▪Encapsulated to completely protect from the elements
▪▪High output with a precision buck regulator circuit
▪▪Keeps working if one of the LED's should fail
▪▪Excellent viewing angles
▪▪10-30VDC
▪▪Lifetime Warranty on 0Z series
▪▪Drop in replacement for 35-40W halogen lights
▪▪Stainless 3.45", removable bezel
▪▪Dimmable
▪▪2.5” cut out, Depth: .55"
▪▪12, 24 and 32VDC
LUN LLB-46WR-21-SS
LUN LLB-46WW-21-SS
LLB-189W-21-0Z
LUN LLB-189G-21-0Z
LUN LLB-189R-21-0Z
LUN LLB-189W-21-0Z
Green, 42mm
Red, 42mm
White, 42mm
LUN LLB-189B-21-00
Red/Green, 42mm
LUN LLB-319G-71-0Z
LUN LLB-319R-71-0Z
LUN LLB-319W-71-0Z
LUN LLB-319B-71-00
Green, 43mm, 2-dimple
Red, 43mm, 2-dimple
LLB-319G-71-0Z
White, 43mm, 2-dimple
Red/Green, 43mm, 2-dimple
Lunasea
Dome Lights
W
E
N
Lunasea
Anchor Navigation Lights
▪▪5.5" or 6-3/4" diameters
▪▪Brushed nickel or chrome finish
▪▪High/low or white/red light switch
▪▪High intensity
▪▪120 degree viewing angle
▪▪10-30VDC
▪▪White (3 watt)/Red (1 watt) switched
LUN LLB-10WR-21-BN
LUN LLB-10WR-21-CR
5.5" Nickel, Warm White/Red
5.5" Chrome, Warm White/Red
LUN LLB-07WR-21-CR
6-3/4" Chrome, Warm White/Red
▪▪High (6 watt)/low (3 watt) switched
LUN LLB-10WW-21-BN
LUN LLB-10WW-21-CR
5.5" Nickel, Warm White, high/low
5.5" Chrome, Warm White, high/low
LUN LLB-07WW-21-BN
LUN LLB-07WW-21-CR
6-3/4" Nickel, Warm White, high/low
6-3/4" Chrome, Warm White, high/low
Lunasea
Cabin Wall Light
E
N
W
▪▪Tri-colour/Anchor/Strobe and Anchor/Strobe
▪▪For vessels under 20 meters (65.6')
▪▪2 mile visibility
▪▪COLREG Certified
▪▪Features emergency strobe and auto daylight turnoff for anchor
▪▪Made of machined aluminum, 140 grams (4.9 ounces)
▪▪Waterproof connector is just 0.38" wide for easy cable routing
▪▪State-of-the-art EMI circuitry this light will not affect your VHF
equipment
▪▪Glass lens assures excellent light transmission
▪▪Unit is hard anodized to withstand saltwater environments
▪▪Removable bird spike to accept a windex
▪▪Easy two or three wire installation
▪▪Voltage range: 10-30VDC
▪▪Power consumption: 4 watt
▪▪Height: 3.1" (4.6" with spike) x Dia: 2.5"
LUN LLB-53BK-81-00Tri-light/anchor/strobe
LUN LLB-53BA-81-00
Anchor/strobe light only
3 / 1 watt, Warm White / Red light
3 / 6 watt, Warm White light
Built-in touch dimming switch also produces a
soothing blue glow, simply touch the switch and
hold until you reach the desired lighting.
▪▪Crystal clear acrylic face
▪▪Polished aluminum
▪▪4.5W, 4" x 3.5"
▪▪12 VDC, 3 watt
LUN LLB-33BW-81-OT
Warm White
E
N
Lunasea
Cabin Wall Light
W
Built-in touch dimming switch also produces a
soothing blue glow, simply touch the switch and
hold until you reach the desired lighting.
▪▪4.5 watt wall fixtures put out the light
▪▪Crystal clear acrylic face
▪▪Polished aluminum
▪▪3" diameter
▪▪12 VDC, 4.5 watt
LUN LLB-33AW-81-OT
Warm White
Lunasea
11
N
W
E
Lunasea
Wall Mount Touch Dimming Lights
LLB-33EW-81-OT
3 watt wall fixtures put out the light! Built-in touch dimming switch
also produces a soothing blue glow. The main LED produces a
warming light that will really light your cabin or dim to read by.
Simply touch the switch and hold until you reach desired lighting.
▪▪Brushed nickel finish
▪▪Warm white
▪▪12VDC, 3 watt
LUN LLB-33JW-81-OT
LUN LLB-33LW-81-OT
LUN LLB-33RW-81-OT
LUN LLB-33EW-81-OT
Lunasea
Indoor/Outdoor Wall Lamp
▪▪Spot light output of 25 degrees
▪▪Uses only 3 watts
▪▪Aluminum finish
▪▪6/24VDC
▪▪3-1/2” from mount: Head: 2-1/2” long x dia: 2"
▪▪Base diameter: 1-3/16"
LUN LLB-57WW-81-00
Warm White
LUN LLB-571B-81-00Blue
Lunasea
Multi-Purpose Light Bars
▪▪Stylish modern design with aluminum construction
▪▪Super bright, up to 50,000 hour life
▪▪12” uses only 5W; 24” uses 10W
▪▪Includes in-line switch
▪▪12" dimensions: 12" x .75" x .5"
▪▪24" dimensions: 24" x .75" x .5"
▪▪10-30VDC
LUN LLB-32CC-71-00
LUN LLB-32CW-71-00
12", Cool White, 408 lumen
12", Warm White, 360 lumen
LUN LLB-32YW-71-00
24" Warm White, 816 lumen
6" Daisy Cable
▪▪Allows light bars to run in series (max 3 lights)
LUN LLB-32AH-01-00
Cool light
E
N
LUN LLB-35KC-81-00**
A courtesy light that is stylish, compact and easy
to install. The 316 stainless steel IP67 design lets
you mount either inside or out. Included inline driver provides
continuous light from 10-40VDC.
▪▪60 degree spread
▪▪Flush mount, 28mm diameter
▪▪1M (3 Ft) cable
▪▪Dimmable
W
** Limited Quantities
Lunasea
Chart Light
▪▪Red (1W) and warm white 3 (W) light in one
▪▪Built in switch
▪▪Stalk length: 18" x base dia: 2.8" x head dia: 2.2"
▪▪12, 24 and 32VDC
LUN LLB-49WR-21-CR
Lighting
LLB-33LW-81-OT
W
E
LLB-33RW-81-OT
LLB-33JW-81-OT
N
Lunasea
Courtesy Lights
Lunasea
Light Bars
▪▪Only 8mm thick
▪▪Can be flush or adjustable mounted
▪▪120°, IP20
▪▪12VDC, 4 watt
▪▪300mm /11.8"
▪▪Includes: Light Bar, Touch Dimmer and Power Cable
LUN LLB-32DW-01-00
3000K Warm White, 280lumen
Extender Light Bar
▪▪Double the length with the LLB-32DW-01-AX
▪▪Includes: Light Bar, Power Cable and End-to-End Extension
LUN LLB-32DW-01-AX
Lunasea
Lunasea
IP68 Strips
Lunasea
Utility Light
▪▪Flexible & waterproof (IP68)
▪▪Viewing angle: 120°
▪▪Cut to length
▪▪12VDC
▪▪7.2 watt/meter
▪▪Lightweight
▪▪Natural white light
▪▪432 lumens
▪▪12 & 24 volt
▪▪4 watt
▪▪Flush mount, W: 4.8 cm x L: 16.5 cm x H: 2.4 cm
▪▪On/Off switch with memory
R/G/B, 2 meter
Red, 2 meter
Red, 5 meter
White, 2 meter
White, 5 meter
W
E
LUN LLB-453M-01-02
LUN LLB-453R-01-02
LUN LLB-453R-01-05
LUN LLB-453W-01-02
LUN LLB-453W-01-05
N
Lighting
12
LUN LLB-01WD-81-00
Lunasea Titan
Cold Cathode Fluorescent Light
Lunasea
Indoor Remote Controller
▪▪Built-in dimmer with memory
▪▪Environmental friendly
▪▪Energy efficient
▪▪Nightlight feature uses virtually no power
▪▪Long life: 30,000 hours, replaceable tubes
▪▪Easy Snaplok installation
▪▪Size: 4.5" L x 7" W x .88" H
▪▪10-30VDC @ 295 MA (4 Watts), 4100K Natural White
▪▪CT312-IR Multifunction RGB LED
controller with IR remote
▪▪11 mode/32 level brightness control
▪▪Remote functional to 10 meters
▪▪12/24VDC
▪▪Output power: 4 amps per channel
▪▪90 mm x 70 mm x 28mm
LUN LLB-04W0-01-00**
** Limited Quantities
LUN LLB-45-AR-08-01
Lunasea
Outdoor Remote Controller
Lunasea Titan Narrow Mount
Cold Cathode Fluorescent Light
▪▪RGB IP65 Outdoor multifunction
controller w/ Touch remote
▪▪Input 12/24VDC
▪▪Output Power: 6 amp each channel
▪▪On/Off, 16 colour patterns, 50 level brightness control
▪▪Size: L: 191 x W: 55.5 x H: 46.5 mm
▪▪Longitudinal Diffuser prizm for clean, even lighting
▪▪Built-in dimmer with memory
▪▪Replaceable Duotube fluorescent bulb features two
tubes enclosed in one cylinder
▪▪Nightlight feature uses virtually no power
▪▪Environmental friendly
▪▪Energy efficient
▪▪Long life: 30,000 hours
▪▪Easy Snaplok installation
▪▪Size: 13.25" L x 1.5" W x .92" H
▪▪12VDC @ 810 MA (10 Watts), 4100K Natural White
LUN LLB-45AR-08-OD
** Limited Quantities
Lunasea Calypso
Cold Cathode Fluorescent Lights
Use as the main lighting source in the galley, salon or where you
want serious light output. Very thin design at only 24 mm thick,
surface mountable and easy-to-install.
▪▪Built-in dimmer with memory
▪▪Ultra high light output
▪▪Four white replaceable tubes
▪▪Environmental friendly
▪▪Energy efficient
▪▪Long life: 30,000 hours vs. 6,000 hours standard CFL
▪▪Size: 14" L x 5.41" W x .93" H
▪▪12-24VDC (16 watts)
LUN LLB-02W0-01-00
LUN LLB-02W0-01-30
Natural White, 4200K
Warm White, 3000K
▪▪Nightlight built in switch lets you know what color is set and
allows changing red and white before turning on
▪▪Nightlight feature uses virtually no power
LUN LLB-02WR-01-00
Natural White/Red light
W
LUN LLB-17PA-11-00
LUN LLB-05W0-01-00**
E
N
This low voltage, fully potted, waterproof converter protects your
LED lights from overloading, over-current and over-heating.
▪▪Output current: 3 amp
▪▪Output power: 36 watts
▪▪Conversion efficiency: 96%
▪▪Output ripple: 50mV (MAX) 20M-bandwidth
▪▪Full load temperature rise: 50C
▪▪Load regulation: +/- 1%
▪▪Voltage regulation: +/- 2%
▪▪Operating temp: -40C to +85C
▪▪Size: 58 x 40.5 x 22mm
▪▪Weight: 93g
W
E
N
Lunasea 24/12 VDC Converter
Lunasea
N
W
E
Lunasea
Ignition Proof Engine Room/Utility Light
Lunasea
Exterior Floodlight
▪▪Hard anodized & white varnished
▪▪900 lumens
▪▪6' power cable
▪▪H: 3.38" x W: 4.5" x D: 3.5"
LUN LLB-355C-01-10
12VDC, 10W
Lunasea
Exterior Floodlights
Lunasea
Hi-Intensity Spotlights
LUN LLB-35MC-01-10
LUN LLB-35MC-51-10
N
LUN LLB-51WO-91-00
▪▪Hard anodized & white varnished
▪▪4,500 lumens
▪▪6' power cable
▪▪H: 7.875" x W: 9" x D: 5.875"
W
E
Lunasea
Spreader Light
▪▪11 watt high output spreader light
▪▪Aluminum construction with a Alodine
and white baked Urethane finish
▪▪12, 24, 32 VDC, 11 watt
▪▪Daylight white LEDs (1160/550 Lumen)
▪▪IP65 compliant protection
▪▪Built-in light sensor (Auto-off during daylight)
▪▪Fully dimmable
▪▪L: 7-1/4" x H: 2-1/4" x D: 1-1/8"
▪▪Fasteners: #6
LUN LLB-472W-21-10
4500K, Natural White
W
20 degree beam
40 degree beam
E
LUN LLB-503N-91-00 LUN LLB-503W-91-00
12/24VDC, 50W
85-265VAC, 50W
N
The Extreme Beam spot light produces
immense intensity within a compact stylish
package.
▪▪Thermally protected & dimmable (digital
dimmer not included)
▪▪High intensity output
▪▪Input Voltage: 12-32 VDC
▪▪2100 lumens @ 23 watts
▪▪IP67 rated
▪▪Colour: Cool white
▪▪Available in 20 and 40 degree beam
▪▪W: 4" x L: 5.75" xD: 2"
▪▪Versatile mounting with stainless steel bracket and hardware
Lighting
▪▪15 watt output
▪▪Can be controlled using a digital
dimming switch
▪▪Aluminum anodized & white
urethane finished
▪▪1400 lumens
▪▪Colour temp: White 4500K
▪▪10-40 VDC
▪▪120° beam angle
▪▪IP67 rating
▪▪H: 4.6" x W: 6.75" x D: .68"
13
Lunasea
Extreme Intensity Exterior Floodlights
▪▪As close as you get to HID intensity
▪▪10,000 point source lumens
▪▪80 watts, 85-265 VAC
▪▪Advanced active cooling
▪▪Marine grade machined enclosure, IP67
▪▪Stainless steel brackets
▪▪6 foot cord included
▪▪H: 10" x W: 10" x D: 6.45"
LUN LLB-541A-31-00*
LUN LLB-541B-31-00*
LUN LLB-541C-31-00*
* Request Items
10 degree
20 degree
40 degree
LIGHTING A SAFE PASSAGE
W
E
Navi light 360°
360º Superbright light
Navi light Dual Kit S
N
Super Bright LEDs
Waterproof
Magnetic Attachment
Compact & Portable
All of the features of
the Navi light 360°
with a suction cup
attachment system
Waterproof
Double Magnetic System
Functions
1. All on - Tri- Color Navigation light
2. Only White - Stern Navigation light / Flash light
3. Red and Green - Bi-Color Navigation light
4. Only Red - Red Navigation light
5. Only Green - Green Navigation light
6. All off
Features
▪ Ultra bright CREE LED headlamp
▪ 5 lighting modes incl. red light
▪ Small and light - only 48 g (without battery)
▪ Multi-position tilt function
▪ IPX6 waterproof
Sport
W
All of the features of
the Navi light 360° in
Navigation Tri-Colour
Designed by experienced Sailors and includes all
functions needed to make it the Sailor’s first choice:
a red light to preserve night vision, a white floodlight
to light the whole sail, and an ultra-powerful distance
light shining up to 70 m, an emergency flash light to
increase the visibility and a multi-position tilt function
for exact and comfortable beam positioning.
E
Navi light RedGreen
Headlamp
N
▪ Exceptionally Cost effective
▪ Sealed unit, air-tight and waterproof
▪ Superbright 360° Light Visible up to
2 km in darkness
▪ High Burn time:
▪ Light Weight: only 130g (155g with
magnet bracket)
▪ Simple push button on/off
▪ Attach to almost anything with its
double magnetic system
▪ Floats in water with light facing up
▪ Ultra compact; small enough to fit
inside a pocket.
▪ Easy fastening to caps, hats, hoods
and all types of clothing
▪ Runs on standard 3 x AAA batteries
▪ Dual Mode – Steady-on or Flashing
▪ Rugged, durable and impact resistant
NaviSafe
Ready to go navigation light solution that
securely mounts on any smooth, flat surface.
The quick release suction cup releases with
just one push of the lever so it can be stored
quickly or mounted to another place or boat.
The suction cup can also be used to hold a
GoPro camera (Hero / 2 / 3) when no light
is needed - the mount is fully compatible.
Kit contains the white all-round (041) and tri-colour (341)
navigation lights with a quick mounting suction cup design.
▪▪USCG Approval, 2 Nautical Miles
001
010
NaviSafe Magnetic Mount
▪▪Compatible with Navisafe double magnetic system
NAS 771
NAS 001Black
NAS 010
Green fluorescent
Parts:
NAS 110
Spare magnetic bracket
055
W
E
N
Railblaza Starport Mount
NAS 055Black
W
E
N
Scotty Mount
NAS 061Black
Suction Cup Mount
NaviSafe
Light Pack - For Inflatables
061
Consisting of lights and mountings needed to fit out most
inflatable boats up to 12 m with Navigation lights in
compliance with COLREG 72 (International Regulations
for Preventing Collision at Sea).
▪▪Navi light 360° (#001)
▪▪Navi light Red/Green (#305)
▪▪Telescopic Pole V-Mount (#901)
▪▪Navisafe converter RAILBLAZA (#930)
▪▪RIBPort (#525)
NAS 041Black
041
NaviSafe
Tri-Colour
▪▪USCG Approval, 2 Nautical Miles
▪▪5 Modes:
1. All on
Tri-Color
2. Red and Green Bi-Color
3. Only Red
Red side
4. Only Green
Green side
5. Only White
White stern
▪▪Floating, waterproof and air-tight
▪▪Powered by three AAA batteries (not included)
NaviSafe/Railblaza
Ribport Adapter
▪▪Use Navisafe with your inflatable without
having holes cut into the tubing
▪▪150 mm x 114 mm x 21 mm
355
NAS 525
W
E
N
NaviSafe Magnetic Mount
▪▪Compatible with Navisafe magnetic system
NAS 765
305
NAS 305 Black
Parts:
NAS 110
Spare magnetic bracket
Railblaza Starport Mount
▪▪Compatible with RAILBLAZA StarPorts
mounting system
361
N
E
NAS 355 Black
W
Scotty Mount
NAS 361Black
Suction Cup Mount
NAS 341 Black
341
Lighting
▪▪USCG Approval, 2 Nautical Miles
▪▪5 Modes:
1. 360° All-round
16 LED
2. 225° Masthead
10 LED
3. 135° Stern
6 LED
4. 360° Flashing
16 LED
5. 360° Dim function 4 LED
▪▪Floating, waterproof and air-tight
▪▪Powered by three AAA batteries (not included)
W
NaviSafe
Navi Light Dual Kit S
E
N
NaviSafe
All-Round White
15
16
NaviSafe
Lighting
NaviSafe Mounting Pole Kits
With Magnetic Heads
▪▪901/902 poles have Railblaza Starport mounts while the
900 is a fixed mount base adjustable through 180°
▪▪The 901/902 series will fit many anchor winches and
winches
▪▪Secure 19-30" telescopic adjustment
▪▪Can be used with the 001, 010 and 305 Navi Lights
(magnetic mount)
▪▪Top has the standard magnetic attachment for Navi Light
* Light not included
NAS 900
Horizontal fixed mount
NAS 901
NAS 902
NAS 903
Vertical mount with sideport
Horizontal mount with starport
Horizontal Scotty mount
900
900
901
902
901 mounted
NaviSafe Mounting Poles
With Bendable Suction Mount & Magnetic Head
▪▪Secure, Quick release suction
cup base with NAVISAFE
magnet system head
▪▪Bendable through 180°
▪▪Includes mountable base plate
NAS 910
NaviSafe Mounting Poles
With Clamp-on Rail Mount & Magnetic Head
▪▪Secure adjustable clamp base with
NAVISAFE magnet system head
▪▪Rotates through 180°
NAS 920
NaviSafe/Railblaza Converter
With StarPort Mount & Magnetic Head
This converter is a cross over product to make the best use of the
RAILBLAZA StarPort Mounting system. The product’s top with
the NAVISAFE magnet system will securely hold your Navi light
001/300 and the base fits to all RAILBLAZA Mounts. We highly
recommend this product to assure a horizontal fixing regardless of
the mount used.
NAS 930
NAS 901 mount with a NAS 001 Navi Light
903
NaviSafe
17
NaviSafe
Headlamp
▪▪Functions as a head light, 360° light and emergency flash
▪▪The complete unit and components float in water
▪▪The LED is tilted to light forwards
▪▪Full range of attachments can be worn anywhere
▪▪Includes wrist strap & armband
Weight: ............. 85g
Size:................... H: 35mm x W: 50mm x L:62mm
Water proof:...... 6 m
Batteries:........... 3 x AAA (not included)
Modes:
1 Red LED........ Forward
2 White LED..... Forward
4 White LED..... Forward
11White LED.... 360° flashing light
This headlamp contains three main
function: a red light to preserve night
vision, a white floodlight, and an
ultra-powerful distance light shining
up to 70 m, plus tilt function for
exact and comfortable beam positioning.
▪▪Ultra bright CREE LED headlamp
▪▪Weighs 68 g with a single AA battery (not included)
▪▪IPX6 classified and withstands heavy splashing and rain
Navisafe Smart Mode Switch:
Press and hold for 0.5 sec to activate the red light. If the red light is
ON for more than 3 PRESS the switch again and the light turns OFF
To activate the white light PRESS and HOLD for 0.5 sec and activate
the red light, PRESS again quickly and enter into white light mode
PRESS again quickly to get to the next mode
In ANY mode: PRESS and HOLD for 1.5 sec to turn light OFF
W
NAS 220
NaviSafe 360° LED Stealth (Hunter)
▪▪All the modes and features of the original Navi
Light but without reflective material
▪▪A removable black cap eliminates excess
relflection while focusing the directional beam
NaviSafe Mini
Five different lighting modes including red LED for night vision.
▪▪Waterproof
▪▪Compact & robust
▪▪Powerful 1 watt red & white LEDs
▪▪Batteries: 2 x AAA (not included)
▪▪H: 59mm x W: 39mm x D: 18mm
NAS 820**
NaviSafe Sport Attachments
Standard Arm Band Sport Attachment
▪▪This much shorter version of the Navi light
standard armband is great for ladies and
children, and for anyone wearing the Navi
Light Sport with bare arms
▪▪The Navi Light Sport quickly and easily
secures to the Small Armband using a simple
hook-and-loop system
▪▪Reflective material enhances visibility
NAS 850**
850
NAS 400Black
NAS 401White
NAS 403Pink
NAS 404Yellow
860
Double Magnetic Holder
▪▪Powerful magnets secure the Navi Light Sport
to a huge variety of surfaces and materials
▪▪Operates as a single magnetic system, or as a two-part
system with separable magnetic surfaces
▪▪Powerful magnets clamp two halves together through even
thick material
870
NaviSafe
PFD Attachment For #001 & #010 Lights
NAS 860**
The Personal Floating Device (PFD) attachment is the must have for
canoe or kayak users who do not want to carry the Navi light 360°
attached to their hat. It fits perfectly into the Lash Tab or Wedding
tube of most of the life vests available in the market. Use the lanyard
of the light and secure the light to the PFD attachment once it has
been fixed.
Clip Holder
NAS 120
▪▪A simple hook-and-loop system secures the
Navisafe clip holder to your Navi Light Sport
▪▪42 small teeth keep the sturdy spring-loaded clip in place
NAS 870**
Velcro Straps
880
▪▪Three different sizes of Velcro
straps provide the ultimate in
flexible attachment systems for
the Navilight Sport.
▪▪16cm (small), 25cm (medium) and 48cm (large)
NAS 880**
** Limited Quantities
Lighting
NAS 800**
E
N
NaviSafe 360°
Sport
Rigid Industries
18
Lighting
Rigid Industries Marine Lights
▪▪Available in Hybrid or Specter optics
▪▪GORE pressure equalization vent
▪▪Unbreakable polycarbonate lens
▪▪A360 aluminum cast housing
▪▪UV 3800 polyester powdercoat
▪▪9-36VDC
▪▪50,000+ hour life span
▪▪Diffuse version also available
▪▪IP68 certified
▪▪MIL810-STDG vibration certified & ROHS compliant
▪▪Patented optic system
▪▪Integrated thermal management system
▪▪Stainless steel mounting bracket and hardware
Marine Series Lights Feature a
Durable UV 3800
Marine Grade
Polyester Powdercoat
M-SERIES 3" Dually Hybrid
Part #
Colour
Type
A-B-C
RIG 60121
RIG C60121
White
Black
Spot
646 - 254 - 508
RIG 60111
RIG C60111
White
Black
Flood
55 - 74 - 148
RIG 60151
RIG C60151
White
Black
Diffusion
11 - 33 - 66
Spot
Flood
▪▪LED's: 4
▪▪Total Watts: 20
▪▪Amp Draw: 1.45
▪▪Raw Lumens: 1568
Diffused
M-SERIES 3" D2 Specter
Part #
Colour
Type
A-B-C
RIG 70131
RIG C70131
White
Black
Driving
203 - 142 - 285
RIG 70111
RIG C70111
White
Black
Wide
173 - 132 - 263
RIG 70151
RIG C70151
White
Black
Diffusion
20 - 45 - 89
Driving
▪▪LED's: 6
▪▪Total Watts: 34.5
▪▪Amp Draw: 2.5
▪▪Raw Lumens: 3090
Wide
Diffused
LUX GRAPHS
The custom designed Lux graphs will help to paint the
picture of brightness at certain distances.
A
The measurement of light emitted at 10 meters
(32.8 feet) from the lens
B
Distance at 1 Lux (defined as enough usable
light to read a newspaper)
C
Distance with .25 Lux = peak beam distance
(lighting that resembles moonlight)
19
Rigid Industries
W
E
Part #
N
M-SERIES 6" Hybrid
Combo
Type
A-B-C
White
Black
Spot
1750 - 418 - 837
RIG C80631
Black
Combo
690 - 263 - 525
RIG C80611
Black
Flood
170 - 130 - 261
RIG 806512
White
Diffused
50 - 71 - 141
▪▪LED's: 12
▪▪Total Watts: 45
▪▪Amp Draw: 3.26
▪▪Raw Lumens: 4500
Lighting
Colour
RIG 806212
RIG C80621
N
W
E
M-SERIES 10" Hybrid
Part #
Colour
Type
A-B-C
RIG 810212
White
Spot
2530 - 503 - 1006
RIG C81011
Black
Flood
260 - 161 - 322
RIG C81031
Black
Combo
1500 - 387 - 775
▪▪LED's: 20
▪▪Total Watts: 65
▪▪Amp Draw: 4.71
▪▪Raw Lumens: 5740
E
N
Part #
W
M-SERIES 40" Hybrid
Colour
Type
A-B-C
RIG C84031
Black
Combo
4890 - 699 - 1399
RIG 840312
White
Combo
4890 - 699 - 1399
▪▪LED's: 80
▪▪Total Watts: 220
▪▪Amp Draw: 15.94
▪▪Raw Lumens: 18400
W
E
N
M-SERIES 50" Hybrid
Part #
RIG 850312
Colour
Type
A-B-C
White
Combo
6040 - 777 - 1554
▪▪LED's: 100
▪▪Total Watts: 275
▪▪Amp Draw: 19.93
▪▪Raw Lumens: 23000
M-SERIES Q
24511
N
Colour
Type
A-B-C
RIG 24511
White
Flood
169 - 130 - 260
RIG 24521
White
Spot
1840 - 429 - 858
Dimensions
HxWxD
6.79" x 6.75" x 3.42"
W
Part #
E
▪▪A combination of four D2 specter optics into one large sturdy housing
with a vibration isolator and 304 stainless bracket included
▪▪LED's: 16
▪▪Total Watts: 80
▪▪Amp Draw: 5.8
▪▪Raw Lumens: 7040
24521
Driving Pattern - The Driving version of the Specter optics system projects light not only far,
but also wide. This light utilizes a narrow, oval-shaped reflector that projects both spot and
flood beam patterns. Rather than a conical beam, this technology creates an oblong beam
that maintains a bright center hot spot, as well as incredible horizontal dispersion.
Diffusion Lens - Perfect for scene or area lighting, the diffusion lens was specifically
engineered to project light at a 60º flood pattern. Combine that with our patented optics and
you have the best LED flood light in the industry. Like our standard lens, the diffusion lens is
made from optically clear, unbreakable polycarbonate plastic.
Rigid Industries / Plug Light
20
N
W
E
Rigid Industries
Adjustable Bar Mount Kit
Lighting
▪▪Includes two (2) mounts; one for each
end of a light bar
▪▪Mounts allow for 1" of position
adjustment for extreme versatility
▪▪Made in the USA from light-weight,
black anodized billet aluminum
RIG 48720
RIG 42020
RIG 42320
RIG 45220
Fits 1.875"
Fits 2"
Fits 2.375"
Fits 2.5"
Rigid Industries
Halo 800 Lumens Flashlight
This flashlight has 5 modes:
1. Medium - Approx. 500 lumens
2. Low - 200 lumens
3. High - 800 lumens
4. Strobe
5. SOS strobe in morse code
▪▪VERY bright light on high setting
▪▪Full charge run time (medium) - 2 hours 45 minutes
▪▪Includes AC wall and DC adapter chargers
▪▪Head diameter: 1-3/4"
▪▪Length: 5-7/8"
▪▪Weight: 4.5oz without batteries
RIG 30120
Parts:
RIG 30111
Replacement Li-on battery
Rigid Industries
Deluxe Docking Lights
PLG BLUE
PLG GREEN
PLG RED
PLG WHITE
Multi Light
Multi-colour light provides red, blue, green,
yellow, white, teal and purple options. Pick
one colour or have the Plug Light cycle
through them all.
▪▪Complete with controller switch
PLG MULTI COLOUR
W
E
RIG 40035Pair
▪▪Stainless steel underwater LED light threads into a boat’s
garboard drain plug; 1/2” NPT
▪▪Does not require drilling
▪▪Easy, user-friendly two wire installation
▪▪Underwater light for fishing, diving, cruising and dock parties
▪▪Ultra-waterproof light with 316L stainless steel housing
▪▪Shatterproof crystal lens
▪▪6 LED; 720 lumen
▪▪12V; 1 amp
▪▪1 year warranty
N
Features Rigid’s marine-grade
SR-M2 (Wide optics) LED light.
By incorporating a reflector with
no facets or orange peel, its Specter
optics system produces an intense,
smooth beam with minimal wasted light. The SR-M2 LED light
projects up to 263 meters with an output of 1,125 lumens per side.
Drawing only 0.82 amps, the SR-M2
will operate at 100% with minimal
power consumption. A high-power
A-Series light has been precisely placed
on the side to project light that gives
you additional coverage for docking
and securing your vessel. The small but
powerful A-series LED light projects an
amazing 400 lumens per side, drawing a
minimal 0.3 amps.
▪▪Stainless steel construction
▪▪10-28V DC
▪▪Reverse polarity protection
▪▪10-28 VDC
▪▪IP68, IP69K certified, ROHS compliant
▪▪L: 8.45" x H: 4.59" x Overall depth: 2.14"
Plug Light
Underwater Lights
Electrical / Electronics
21
ALMO
22
BLUE SEA SYSTEMS
25
EFOY
50
ENERGY 1
52
FTZ
53
FURUNO
58
FUSION
67
HATTELAND DISPLAYS
71
JENSEN
73
MAGNUM
75
MARETRON
80
MASTERVOLT
86
PROFESSIONAL MARINER
90
SAMLEX
91
SHAKESPEARE
93
SMART PLUG
99
TECHFLEX
100
UNIDEN
102
22
Almo
Almo Boat Cable (Black/Green/White)
Electrical / Electronics
Almo Safety Boat Cable (Red/Yellow)
Colour coded insulated tinned copper wire with a
high quality flame resistant white PVC cover for
long life under all normal conditions.
▪▪Rated 600 volt, 105°C Dry, 75° C Wet
Part #
AWG
Colour coded insulated tinned copper wire with a
high quality flame resistant white PVC cover for
long life under all normal conditions.
▪▪Rated 600 volt, 105°C Dry, 75° C Wet
Part #
AWG
Length
ALM 10/3W-BGW-C
10/3
100’
ALM 10/3W-BGWFT
10/3
Foot
Length
ALM 10/3W-BGWR
10/3
500’
12/3
100’
ALM 10/2W-RY-C
10/2
100’
ALM 12/3W-BGW-C
ALM 10/2W-RYFT
10/2
Foot
ALM 12/3W-BGWFT
12/3
Foot
12/3
500’
ALM 10/2W-RYRL
10/2
500’
ALM 12/3W-BGWR
ALM 12/2W-RY-C
12/2
100’
ALM 14/3W-BGW-C
14/3
100’
14/3
Foot
ALM 12/2W-RYFT
12/2
Foot
ALM 14/3W-BGWFT
ALM 12/2W-RYRL
12/2
500’
ALM 14/3W-BGWR
14/3
500’
100’
ALM 14/2W-RY-C
14/2
100’
ALM 16/3W-BGW-C
16/3
ALM 14/2W-RYFT
14/2
Foot
ALM 16/3W-BGWFT
16/3
Foot
ALM 14/2W-RYRL
14/2
500’
ALM 16/3W-BGWR
16/3
500’
ALM 16/2W-RY-C
16/2
100’
ALM 16/2W-RYFT
16/2
Foot
ALM 16/2W-RYRL
16/2
500
ALM 18/2W-RY-C
18/2
100’
ALM 18/2W-RYFT
18/2
Foot
ALM 18/2W-RYRL
18/2
500’
Black/green/white insulated tinned copper wire with a
high quality flame resistant white PVC cover for long
life under all normal conditions.
▪▪Rated 600 Volt, 105°C Dry, 75° C Wet
Part #
ALM 14/3RW-BGW-FT
Almo Boat Cable (Red/Black)
Colour coded insulated tinned copper wire with a
high quality flame resistant white PVC cover for long
life under all normal conditions.
▪▪Rated 600 volt, 105°C Dry, 75° C Wet
Part #
Almo Round Jacket Tinned Boat Cable
AWG
Length
ALM 10/2W-RB-C
10/2
100’
ALM 12/2W-RB-C
12/2
100’
ALM 14/2W-RB-C
14/2
100’
ALM 14/2W-RBFT
14/2
Cut
ALM 16/2W-RB-C
16/2
100’
ALM 16/2W-RBRL
16/2
500’
ALM 18/2W-RB-C
18/2
100’
AWG
Length
14/3
Cut
Almo 10/3 Yellow Service Cord
Premium quality cable with rugged high performance,
bright yellow, PVC insulation. Excellent flexibility
even at very low temperatures. Insulation is highly
resistant to tears, oils, solvents, ozone, heat and cold.
▪▪UL listed Type STOW and CSA certified STOW,
600 volts, 60°C.
▪▪Black/green/white
▪▪250' spools, sold by the foot
ALM 10/3STOWFT
23
Almo
Almo Tinned Primary Wire
Almo Tinned Primary Wire - Continued
▪▪UL Listed tinned battery cable
▪▪Rated 600 Volt*105°C Dry, 75°C Wet
▪▪Recognized by ABYC for AC and DC circuits
▪▪Insulated tinned copper wire
Part #
Color
Length
ALM 10BLKAWGC
10
Black
100
ALM 10BLKAWGM
10
Black
1000
ALM 10GRNAWGC
10
Green
100
ALM 10REDAWGC
10
Red
100
ALM 10REDAWGM
10
Red
1000
ALM 10WHTAWGC
10
White
100
ALM 10YELAWGC
10
Yellow
100
ALM 10YELAWGM
10
Yellow
1000
ALM 12BLKAWGC
12
Black
100
ALM 12BLKAWG250
12
Black
250
ALM 12BLKAWG500
12
Black
500
ALM 12GRNAWGC
12
Green
100
ALM 12REDAWGC
12
Red
100
ALM 12REDAWG500
12
Red
500
ALM 12WHTAWGC
12
White
100
ALM 12YELAWGC
12
Yellow
100
ALM 12YELAWG250
12
Yellow
250
ALM 14BLKAWGC
14
Black
100
ALM 14BLKAWG250
14
Black
250
ALM 14BLKAWGM
14
Black
1000
ALM 14BLUAWGC
14
Blue
100
ALM 14BLUAWGM
14
Blue
1000
ALM 14BRNAWGM
14
Brown
1000
ALM 14BRNAWGC*
14
Brown
100
ALM 14GRNAWGC
14
Green
100
ALM 14GRNAWGM
14
Green
1000
ALM 14GRYAWGM
14
* Request item
Grey
1000
Part #
Color
Length
14
Orange
100
ALM 14REDAWGC
14
Red
100
ALM 14REDAWGM
14
Red
1000
ALM 14WHTAWGC
14
White
100
ALM 14WHTAWGM
14
White
1000
ALM 14YELAWGC
14
Yellow
100
ALM 14YELAWGM
14
Yellow
1000
ALM 16BLKAWGC
16
Black
100
ALM 16BLKAWGM
16
Black
1000
ALM 16BLUAWGC
16
Blue
100
ALM 16BRNAWGC
16
Brown
100
ALM 16GRNAWGC
16
Green
100
ALM 16GRYAWGM
16
Grey
1000
ALM 16ORGAWGC
16
Orange
100
ALM 16PINKAWGM
16
Pink
1000
ALM 16REDAWGC
16
Red
100
ALM 16REDAWGM
16
Red
1000
ALM 16PURAWGC
16
Purple
100
ALM 16WHTAWGC
16
White
100
ALM 16WHTAWGM
16
White
1000
ALM 16YELAWGC
16
Yellow
100
ALM 16YELAWGM
16
Yellow
1000
ALM 18BLKAWGC
18
Black
100
ALM 18BLKAWG500
18
Black
500
ALM 18BRNAWG500
18
Brown
500
ALM 18GRNAWGC
18
Green
100
ALM 18REDAWGC
18
Red
100
ALM 18REDAWG500
18
Red
500
ALM 18WHTAWGC
18
White
100
ALM 18YELAWGC
18
Yellow
100
Electrical / Electronics
AWG
AWG
ALM 14ORGAWGC
24
Almo
Almo Battery Cable
Almo Battery Cable - Continued
Electrical / Electronics
Colour coded insulated tinned copper wire with
a high quality flame resistant SGT thermoplastic
cover for long life under all normal conditions.
▪▪Rated 600 volt, 105°C Dry, 75° C Wet
Part #.
Part #.
AWG
Colour
Length
ALM 4/0REDAWGC
4/0
Red
100'
ALM 4/0REDAWG3
4/0
Red
300'
ALM 4/0REDAWGFT
4/0
Red
Cut
ALM 4/0BLKAWGC
4/0
Black
100'
ALM 4/0BLKAWG3
4/0
Black
300'
ALM 4/0BLKAWGFT
4/0
Black
Cut
ALM 4/0YELAWGC
4/0
Yellow
100’
ALM 2/0REDAWGC
2/0
Red
100'
ALM 2/0REDAWGR3
2/0
Red
300'
ALM 2/0REDAWGFT
2/0
Red
Cut
ALM 2/0BLKAWGC
2/0
Black
100'
ALM 2/0BLKAWGR3
2/0
Black
300'
ALM 2/0BLKAWGFT
2/0
Black
Cut
ALM 2/0YELAWGC
2/0
Yellow
100’
ALM 2/0YELAWGFT
2/0
Yellow
Cut
ALM 1/0REDAWGC
1/0
Red
100'
ALM 1/0REDAWGFT
1/0
Red
Cut
ALM 1/0BLKAWGC
1/0
Black
100'
ALM 1/0BLKAWGFT
1/0
Black
Cut
ALM 1/0YELAWGC
1/0
Yellow
100’
ALM 1/0YELAWGFT
1/0
Yellow
Cut
ALM 1BLKAWGC
1
Black
100'
ALM 1BLKAWGR
1
Black
250'
ALM 1BLKAWGFT
1
Black
Cut
ALM 1REDAWGC
1
Red
100'
ALM 1REDAWGR
1
Red
250'
ALM 1REDAWGFT
1
Red
Cut
ALM 1YELAWGC
1
Yellow
100’
ALM 2REDAWGC
2
Red
100'
ALM 2REDAWGR
2
Red
500'
ALM 2REDAWGFT
2
Red
Cut
ALM 2BLKAWGC
2
Black
100'
ALM 2BLKAWGR
2
Black
500'
ALM 2BLKAWGFT
2
Black
Cut
ALM 2YELAWGC
2
Yellow
100’
ALM 2YELAWG250
2
Yellow
250’
ALM 2YELAWGFT
2
Yellow
Cut
AWG
Colour
Length
ALM 4REDAWGC
4
Red
100'
ALM 4REDAWG250
4
Red
250'
ALM 4REDAWGR
4
Red
500'
ALM 4REDAWGFT
4
Red
Cut
ALM 4BLKAWGC
4
Black
100'
ALM 4BLKAWGFT
4
Black
Cut
ALM 4YELAWGC
4
Yellow
100’
ALM 4YELAWG250
4
Yellow
250’
ALM 4YELAWGFT
4
Yellow
Cut
ALM 6REDAWGC
6
Red
100'
ALM 6REDAWG250
6
Red
250'
ALM 6REDAWGR
6
Red
500'
ALM 6REDAWGFT
6
Red
Cut
ALM 6BLKAWGC
6
Black
100'
ALM 6BLKAWGR
6
Black
100'
ALM 6BLKAWGFT
6
Black
Cut
ALM 6GRNAWGC
6
Green
500'
ALM 6GRNAWGR
6
Green
100'
ALM 6GRNAWGFT
6
Green
Cut
ALM 6YELAWGC
6
Yellow
100’
ALM 6YELAWG250
6
Yellow
250’
ALM 6YELAWGFT
6
Yellow
Cut’
ALM 8REDAWGC
8
Red
100'
ALM 8REDAWGR
8
Red
500'
ALM 8REDAWGFT
8
Red
Cut
ALM 8BLKAWGC
8
Black
100'
ALM 8BLKAWGR
8
Black
500'
ALM 8BLKAWGFT
8
Black
Cut
ALM 8GRNAWGC
8
Green
100'
ALM 8GRNAWGR
8
Green
500'
ALM 8GRNAWGFT
8
Green
Cut
ALM 8YELAWGC
8
Yellow
100’
ALM 8YELAWGFT
8
Yellow
Cut
Blue Sea Systems
AC SOURCES
AC LOADS
Outlets
Shore Power
Microwave
Genset
Refrigerator
Inverter
DC LOADS
Horn
DC SOURCES
Running Lights
Cabin Lights
Engine 1
GPS
Engine Battery
VHF
Stereo
House Battery
Windlass
Auxiliary
Battery
Bow Thruster
Scan for additional
product information
www.bluesea.com
26
Electrical / Electronics
Blue Sea Systems
Pacific Series Battery Chargers
Reliability
▪▪Rugged, finned aluminum case and large internal heat sinking dissipates
heat for less fan run time and longer component life
▪▪Universal Line Voltage 90-265V AC 50/60 Hz for use anywhere in the
world and compatible with low voltage power sources
▪▪Field serviceable AC Input power protection to quickly get the vessel back
up and running in the event of an AC power surge
▪▪Selective Float® moves each battery individually to float voltage ending
absorption period to prevent overcharging
Ease of use
▪▪Large, bright display communicates with plain language words
▪▪Multi-Language: English, Spanish, Italian, French language selection
▪▪Charge Coordination® works with Blue Sea Systems ACRs to properly
charge batteries with shore power at the dock or alternator power
underway
Four Control Buttons
▪▪Fan- User adjustable settings
▪▪Dim/ Alarm - Provides adjustment to brightness of LEDs on
display as well as Silence function for alarms.
▪▪Output - User adjustable charger output when AC source
limitations exist that require lowering the AC current draw.
▪▪Power - Places P12 Battery Charger into standby mode
BSS 7520
Blue Sea Systems M2 DC SoC Monitor
W
E
▪▪Three outputs provide charging for up to three battery banks
▪▪User selectable charge profiles for lead acid, gel, AGM or new Thin Plate
Pure Lead and Lithium Ion batteries
▪▪ACR Charge Coordination controls ACR state ensuring proper float stage
for each battery
▪▪Battery temperature compensation internal or with remote sensor
▪▪Battery Health Mode repeats the charge cycle weekly during storage or
over extended periods
▪▪User selected battery equalizing function to revitalize wet acid batteries
Built In Safety Features
▪▪Ignition protected for mounting in a gasoline
powered boat's engine compartment or near
batteries
▪▪Over and under temperature protection for
batteries
▪▪Overheating protection for battery charger
▪▪DC over voltage protection
▪▪AC reverse polarity protection
▪▪Surge and short circuit protection
The M2 OLED Digital Monitors measure essential
electrical system parameters with adjustable
alarms and an auto-dimming display in a compact
enclosure. The M2 Monitors include a MOSFET
External Circuit Relay (ECR) which can be used
to control external circuits based on any value
measured by the M2. The M2 External Circuit Relay is separate from
and independent of the Internal Alarm function. diagnostics
▪▪Accurately measures and monitors State-of-Charge of 1 bank
▪▪Measures 3 voltages and 1 current
▪▪Supports programmable shunt ratios
▪▪External relay activation
▪▪High current, high/low voltage, low battery alarms
BSS 1830
▪▪Blue Sea Systems onboard support and 5 year warranty
▪▪Extensive suite of diagnostic screens
▪▪User manual and information updates accessible via QR tag below display
▪▪H: 13” x W: 8.46” x D: 3.66”
Volts
Amps
Banks
BSS 7521
12
20
3
BSS 7522
12
40
3
BSS 1015
BSS 1010
BSS 1011
12V plug & dash socket kit
12V plug only (max. amps 15 DC)
12V dash socket only (max. amps 10 DC)
Blue Sea Systems Dual USB Port Charger
▪▪Dual USB 2.0 charger socket with watertight cap
▪▪12 VDC
▪▪Output Voltage: 5V DC +/- 5%
▪▪Max. Output Current: 2.1A DC
▪▪Cut Out Dimensions: 1-3/16” Dia
BSS 1016
W
Support
E
▪▪Power factor corrected for efficient charging
▪▪MOSFET output eliminates unintentional voltage differences between
batteries providing a faster charge for batteries with the greatest amp-hour
deficit
▪▪Plug has a moisture proof sealing ring around
the shaft to keep out spray and make it seat
firmly in the outlet
▪▪Plug features an”ON” indicating LED,
moisture proof sealing ring, strain relief, and a
built-in 10 Amp fuse
▪▪Watertight cap and interlocks with the plug
▪▪Twist lock system -plug locks securely
▪▪Nickel plated copper alloy used for all current
carrying components
▪▪Front panel, rear panel, or surface mount
▪▪Max. 15 VDC
N
Blue Sea Systems 12V Plug and Socket Sets
Electrical Performance
Part #
▪▪Charging LED - Quick check for green light
confirms charging
▪▪Charge Stage - Displays charging stage
▪▪Equalize LED - Indicates the charger is currently in equalization
▪▪Fan Mode - Indicates charger's internal fan mode
▪▪Charge Output - Displays the percentage of output current for
each battery. Will also indicate maximum output setting when
maximum output is adjusted to accommodate for AC source
limitations.
▪▪Alert - Icon LEDs provide warning and alert status
N
Advanced Multi Stage Charging
W
E
LED Indicators
N
Blue Sea Systems Battery Charger LED Remote
27
Blue Sea Systems
Electrical / Electronics
ELECTRICAL
28
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems
Heavy Duty Battery Switches
▪▪Accepts two 4/0 battery cables per terminal
▪▪Luminous label for low light reading
▪▪Ignition protected - Safe for installation aboard gasoline powered boats
▪▪.870” stud length to accept multiple cable terminals
▪▪1/2” tin-plated copper studs for maximum conductivity and corrosion resistance
▪▪Tactile textures indicate knob position by feel only
▪▪Case design allows surface or flush mounting
▪▪Fits all Perko low amperage battery switch hole patterns
Specifications
3000
3002
Cranking Rating: 10 sec
2,750 amperes DC
1,750 amperes DC
Cranking Rating: 60 sec
1,325 amperes DC
1,150 amperes DC
Intermittent Rating: 5 min
900 amperes DC
900 amperes DC
Continuous Rating:
600 amperes DC
500 amperes DC
Voltage Rating:
3000
3002
48 volts DC Maximum
BSS 3000 Single circuit On/Off
BSS 3002 Selector battery bank 1, battery bank 2 or both
Blue Sea Systems
Standard Battery Switches
▪▪Ignition protected - Safe for installation aboard gasoline powered boats
▪▪Tactile textures indicate knob position by feel only
▪▪Case design allows surface or rear panel mounting
▪▪Accepts up to 4/0 battery cables
▪▪Fits all Perko and Guest low amperage battery switch hole patterns
▪▪Luminous label for low light reading
▪▪7/8” stud length to accept multiple cable terminals
▪▪3/8” M10 tin-plated copper studs for maximum conductivity and corrosion resistance
▪▪Make-before-break contact design allows switching between battery banks without
power interruption
Specifications
9003
9001-9002
5510-5111
Cranking Rating: 10 sec
2,000 amperes DC
2,000 amperes DC
1,000 amperes DC
Cranking Rating: 60 sec
1,000 amperes DC
1,000 amperes DC
750 amperes DC
Intermittent Rating: 5 min
600 amperes DC
600 amperes DC
525 amperes DC
Continuous Rating:
350 amperes DC
350 amperes DC
350 amperes DC
Voltage Rating:
48VDC Maximum
32VDC Maximum
32VDC Maximum
BSS 9001E
BSS 9002E
BSS 9003E
4, Off-1-2-Both
4, Off- 1-2-Both AFD*
2, Off-On
Dual Circuit Switches
BSS 5510E
2, On-Off double pole
BSS 5511E
3, On-Off-Both
Switches both negative & positive lines simultaneously with
one simple On/Off switch.
Switches two battery banks simultaneously with one simple
ON/OFF switch while maintaining battery bank isolation.
9001E-9002E
5510E
9003E
5511E
29
Blue Sea Systems
Blue Sea Systems M-Series Battery Switches
6005
Specifications
6005-6006
6007
6011
Cranking Rating: 10 sec
1,500 Amps DC
1,500 Amps DC
1,000 Amps DC
Cranking Rating: 60 sec
775 Amps DC
775 Amps DC
650 Amps DC
Intermittent Rating: 5 min
500 Amps DC
500 Amps DC
450 Amps DC
Continuous Rating:
300 Amps DC
300 Amps DC
300 Amps DC
Voltage Rating:
48 VDC Max
32 VDC Max
32 VDC Max
Case Material:
BSS 6005
BSS 6006
BSS 6007
6006
6007
Reinforced Polycarbonate
Single circuit On/Off, w/key
Single circuit On/Off, w/knob
Selector, 4 position
Dual Circuit Switches
BSS 6011
Dual Circuit Plus**
**The combined batteries function offers the ability to combine
the two battery banks in the event of a low Start Battery.
6 Icon lable Set (Included)
Manual Battery Switch Configurations
Single Circuit ON - OFF
Switches a single battery to a
single lead group
Selector 4 Position
Switches isolated battery banks
to all leads or combines battery
banks to all leads
Dual Circuit
Simultaneously switches two
isolated battery leads
Dual Circuit Plus
Simultaneously switches two isolated
battery banks or combines battery
banks to all loads
M-Series
6005
6006
M-Series
6007
M-Series
6010
M-Series
6011
e-Series
9003e
e-Series
9001e
9002e
e-Series
5510e
e-Series
5511e
HD-Series
3000
HD-Series
3002
Switch set to ON
Switch set to 1
Switch set to 2
Switch set to 1+2
Switch set to ON
Switch set to ON
Switch set to Combine Batteries
6011
Electrical / Electronics
▪▪Ignition protected - Safe for installation aboard gasoline powered boats
▪▪Tactile textures indicate knob position by feel only
▪▪Case design allows surface, front panel, or rear panel mounting
▪▪Accepts up to 4/0 battery cables
▪▪Molded in durable reinforced polycarbonate
▪▪Label set included for circuit identification
▪▪Removable key remains positively retained (6005}
▪▪3/8” M10 Tin-plated copper studs
▪▪7/8” Long stud length to accept multiple cable terminals
▪▪Isolator cover protects rear contacts
30
Blue Sea Systems
W
E
Electrical / Electronics
N
Blue Sea Systems
m-LVD Low Voltage Disconnect
▪▪Senses low battery voltage and
automatically disconnects devices to save
power for starting or to preserve battery life
▪▪Status light in both m-LVD and Remote Control Switch
provides visual warning of low voltage state prior to disconnect
▪▪Alarm output available for audible warning of low voltage state
prior to disconnect (optional alarm required)
Remote Control Switch functions:
◦Disconnect Voltage Adjustment - Sets desired disconnect voltage
◦Override - Temporarily delays circuit disconnect for 10 minutes
◦OFF- Temporarily disconnects circuits until voltage rises
◦Override or OFF - Silences alarm (optional alarm required)
BSS 7635
Blue Sea Systems
Mini ACR Charging Relay
▪▪65 amp continuous rating current from
alternators up to 65 amps found on most
outboards and many inboard engines
▪▪Senses charging on two battery banks
▪▪Snap-on cover insulates terminal connections
▪▪LED indicates ACR status
▪▪1/4” x .032” male quick connect terminal for ground
▪▪5/8” (16 mm) stud length to accept multiple cable terminals
▪▪12 VDC voltage input
BSS 7601
Blue Sea Systems
Battery Relay Auto Relay
▪▪120 amp continuous rating
▪▪12/24 VDC auto ranging voltage input
▪▪Senses charging on two battery banks
▪▪Side and bottom knockouts for cable connections
▪▪Clip-on cover insulates terminal connections
▪▪7/8” (22 mm) stud length to accept multiple cable terminals
▪▪Integrated LED indicates ACR status
▪▪1/4” x .032” male quick connect terminals for ground and
optional features
BSS 7611
Blue Sea Systems Add-A-Battery Kit
The ‘ADD A BATTERY’ dual circuit system
consists of the 5511e, E-series dual circuit
plus battery switch and the 7610, 120 amp SI*
automatic charging relay (in one package).
*Starting isolation
▪▪The 5511e, dual circuit plus battery switch
isolates engine and house circuits, and
combines batteries for emergency starting
▪▪The 7610, 120 amp SI automatic charging
relay combines batteries for charging
BSS 7650
Blue Sea Systems Add-A-Battery Kit - Mini
A compact, simple way to control the switching
with the m-Series Dual Circuit Plus Battery
Switch (6011) and automatically share a single
source of charging between two batteries with
the Mini ACR Automatic Charging Relay
(7601).
BSS 7649
31
Blue Sea Systems
Blue Sea Systems Solenoid
BSS 9012
Blue Sea Systems
ML-Series Automatic Charging Relays
▪▪Manual control switch provides an added level of
safety allowing control with or without power, and
offering lock-off capability for servicing
▪▪Includes ML-Series remote control contura switch
PN 2146
▪▪Automatically manages the charging of two large
battery banks
▪▪Allows paralleling of battery banks for emergency
starting
▪▪500 Ampere continuous rating to support high-output alternators
▪▪Magnetic latch (ML)—ACR draws very low current (<40mA to
monitor terminal voltage) in the "ON" or "OFF" states, and draws
moderate current for very short time when changing state
▪▪Dual sensing—senses charge on both battery banks
▪▪Start isolation (SI)—can be configured for temporary isolation
of House loads from Engine circuit during engine cranking to
protect sensitive electronics
▪▪Engine isolation (EI)—can be configured for isolation of two
engines while both are running to protect engine electronics and
maximize alternator output
▪▪Senses charging on two battery banks
▪▪LED output to remotely indicate when batteries are combined,
isolated, in voltage lockout, or in start or engine isolation
▪▪3/8"-16 tin-plated copper studs for maximum conductivity and
corrosion resistance
▪▪7/8" (22mm) stud length accepts multiple cable terminals
▪▪Silver alloy contacts provide high reliability for switching live
loads
▪▪Label recesses for circuit identification
▪▪Meets ISO 8846 Marine and SAE J1171 Marine external ignition
protection requirements
▪▪Waterproof rated IP66—protected against powerful water jets
▪▪5.47” x 3.75”
BSS 7622
BSS 7623
12 volt
24 volt
▪▪500 ampere continuous rating for use as a remote
battery switch for inboard gasoline or diesel
engines, reducing long cable runs
▪▪Magnetic latch only draws current when changing
state of switch, drawing no current in "ON" or
"OFF" state
▪▪Silver alloy contacts provide high reliability for
switching live loads
▪▪Includes ML-Series remote control contura switch 2145
▪▪Optional manual control switch provides an added level of
safety allowing control with or without power, and offering
lockout capability for servicing
▪▪3/8" copper studs, using Blue Sea Systems’ superior one piece
technology, suitable for 500 amperes continuous rating and large
cable connections
▪▪Cranking rating 10 Sec (10 repeats): 2200 amperes DC
▪▪Intermittent rating 1 min (ul 1107): 750 amperes DC
▪▪Intermittent rating 5 min (ul 1107): 400 amperes DC
▪▪Continuous rating (ul 1107): 300 amperes DC
▪▪Maximum voltage rating: 32 volts DC
▪▪Terminal stud size: 3/8”-16 (m10)
▪▪Terminal stud torque: 140 in-lb
▪▪Cable size to meet ratings: 4/0 awg
▪▪Cable clearance for 4/0 awg cables: 1.12”
▪▪5.47” x 3.75”
BSS 7700
12 volt
Blue Sea Systems SI-ACR
Automatic Charging Relay
With Cover
▪▪Allows temporary isolation of house loads
from engine circuit during engine cranking to
protect sensitive electronics
▪▪Automatically combines battery banks during the charging cycle
and isolates under discharge
▪▪12/24V auto ranging voltage input
▪▪Hermetically sealed contacts/vapour proof
▪▪Waterproof rated IP67
▪▪Ignition protected
▪▪Remote LED output indicates relay state away from ACR
▪▪LED light indicates when batteries are combined
▪▪Supports high-output alternators up to 120 amperes
▪▪Side and bottom knockouts for power cable connections
▪▪Clip on cover protects and insulates terminal connections
▪▪Tin-plated copper studs for maximum corrosion resistance
▪▪7/8” (22.22mm) stud length to accept multiple cable terminals
▪▪1/4” x .031” male quick connect terminals for ground and remote
LED and starting interrupt
▪▪L: 3.886” x W: 3.5” x D: 1.98”
BSS 7610
Specifications
12 volt
24 volt
Continuous Rating
120 amperes DC
120 amperes DC
Intermittent Rating
210 amperes DC
210 amperes DC
Inrush Rating
280 amperes DC
280 amperes DC
Opening Delay
0.34 sec.
0.34 sec.
Maximum Cable Size
1/0 AWG
1/0 AWG
Terminal Stud Size
3/8”-16 (M10)
3/8”-16 (M10)
Maximum Torque
140 in-lbs
140 in-lbs
Electrical / Electronics
L-Series Solenoid Switch with Coil Economizer
▪▪Pulse circuit requires very low current draw when contact is
closed
▪▪UL recognized - UL 508
▪▪Functions as a remote battery switch
▪▪Activated by an ON-OFF switch mounted anywhere
▪▪Used as a manual battery paralleling switch
▪▪Integrated coil control minimizes heating and amperage drop
▪▪Mechanical life 1 million cycles
▪▪Input voltage: 9-36 volts Maximum
▪▪Power Consumption:
▪▪Inrush max: 12-36 volts/3.80 amps
▪▪Holding: 12 volts/0.13 amps
▪▪Holding: 24 volts/0.07 amps
▪▪W: 3.17” x H: 2.86”
Blue Sea Systems
ML-Series Remote Battery Switch
with Manual Control
32
Blue Sea Systems
Choose the right ACR for your application
Step
1 Select an ACR that has a CONTINUOUS rating
Electrical / Electronics
Step
Step
BATTERY MANAGEMENT
above the maximum alternator output rating and
an INTERMITTENT rating that is above the largest
load on the auxiliary battery.
See page 24 for an explanation.
2 Review the PRESET ACR SETTINGS
3 Select the ACR with the desired
PRODUCT FEATURES
Part Number
CONTINUOUS
INTERMITTENT
7601
7611
7610
7620
7622
65A
115A
120A
210A
120A
210A
500A
700A
500A
700A
PRESET ACR SETTINGS
Combine Voltage
-
Charge present
Voltage in either battery is ≥13.6V for 30 sec.
Relay will close combining batteries
Combined batteries share charge
≥13.6V
ACR
≥13.6V
for 30 sec.
for 30 sec.
Start
Auxiliary
Open Voltage
-
No charge present or loads exceed charge input
Voltage in either battery is ≤12.75V for 30 sec.
Relay will open isolating batteries
Isolated batteries do not share charge
≤12.75V
ACR
for 30 sec.
≤12.75V
for 30 sec.
Start
Auxiliary
Under Voltage Lockout
- Charge may or may not be present
- Voltage in either battery is ≤9.6V for 30 sec.
- Relay will open isolating batteries protecting
the ACR from high current surge
- Isolated batteries do not share charge
13.6V
ACR
≤9.6V
for 30 sec.
for 30 sec.
Start
Auxiliary
PRODUCT FEATURES
Auxiliary Battery Priority
Condition: Engine running
- Open voltage is lowered to 12.25V from 12.75V
- Relay remains closed longer, combining batteries,
to allow use of auxiliary loads for a longer period
of time
>12.25V
ACR
for 30 sec.
>12.25V
for 30 sec.
Start
Auxiliary
Start Isolation
Condition: Engine starting
- Relay is open isolating batteries
- Batteries are isolated to protect sensitive
electronics from voltage sags and spikes
ACR
Start
Auxiliary
Start Assist
Condition: Engine starting – (Press Contura Switch)
- Relay is closed combining batteries
- Batteries are combined to share power in the
event of a low start battery
ACR
Start
Auxiliary
Engine Isolation
Condition: Two engines are running
- One relay is open and one relay is closed
- Engine 1 Start and Engine 2 Start batteries are
isolated to protect engine electronics
- If requested by engine manufacturer
ACR
ACR
Eng. 1 Start
Auxiliary
Eng. 2 Start
Manual Override
Manual override knob provides
an added level of safely allowing
manual control of functions
Specifications subject to change. See bluesea.com for current information.
29
33
Blue Sea Systems
Battery Management
Wiring Schematics
for Typical
Applications
2 Battery - 1 Engine
2 Battery - 2 Engine
Traditional Configuration
Simple System
1 Selector Battery Switch
1 Automatic Charging Relay
House battery is shared with one engine.
One engine battery is in reserve.
1 Dual Circuit Plus™ Battery Switch
1 ON-OFF Battery Switch
1 Automatic Charging Relay
system found on any boat or vehicle. Proper
battery management, including switching and
House
Engine
charging, is essential for safe and reliable
operation. The following basic wiring diagrams
House
Engine 2
Engine
show how batteries, battery switches, and
Automatic Charging Relays are wired together
from a simple single battery / single engine
configuration to a two engine, one generator,
and four battery bank system. For more detailed
ACR
Battery 2
Battery 1
wiring guidelines please consult a qualified
ACR
marine electrician or one of the many books
Note:
Uses same
style batteries
available on the subject.
Note: The ACRs pictured are representative of any
ACR. The battery switches are representative of any
Battery Switch of the same model.
Simple to use
Start
House/Start
Simple System
1 Dual Circuit Plus™ Battery Switch
1 Automatic Charging Relay
Engines share one battery. House battery is in reserve.
1 Dual Circuit Plus™ Battery Switch
1 ON-OFF Battery Switch
1 Automatic Charging Relay
1 Battery - 1 Engine
ON-OFF Battery Switch
House
House
Engine
Engine 2
Engine
House
ACR
Engine
ACR
House
Start
Start
Most Flexible
House
Easily isolates a failed battery
Flexible
3 ON-OFF Battery Switches
1 Automatic Charging Relay
Can isolate a failed battery.
Start
3 ON-OFF Battery Switches
1 Automatic Charging Relay
Engine
For m-Series
Battery Switches the
Paralleling Link Bus
9159 can be used.
House
Engine
For m-Series
Battery Switches the
Paralleling Link Bus
9159 can be used.
House
ACR
Start
House
ACR
Start
House
Electrical / Electronics
Batteries are at the heart of the electrical
34
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems ANL Fuse Blocks
▪▪Insulating cover satisfies ABYC/USCG requirements and cover
breakouts allow access in any direction
▪▪For use on systems up to 32 Volts DC
▪▪Large 5/16”-18 studs accept 5/16” (M8) ring terminals
▪▪Swing out design allows replacement of the fuse without
removing fasteners
▪▪Stainless steel studs provide resistance to corrosion and high
torquing for excellent electrical contact
▪▪UL 94-V0 reinforced polycarbonate base resists high heat
▪▪Insert molded studs ensure secure fuse mounting
▪▪Cover breakouts allow wire access in any direction
▪▪Fuse mounting blocks tin-plated copper
▪▪Fuses sold separately (see below)
BSS 5005 BSS 5503
300 amp
750 amp
Blue Sea Systems
Class T Fuse Block
These fuse blocks are specifically for
marine fusing. They come with a clear
polycarbonate cover. The class T fuse is not
an ignition protected device so it should not
be used inside gas engine rooms or other environments requiring
ignition protected devices. 3/8" stud. Takes up to a 4/0 wire.
▪▪W: 2” x L: 7” x H: 2.3”
▪▪Fuses sold separately (see below)
BSS 5502
Class T Fuse Block, 225-400 amps
Blue Sea Systems Class T Fuses
Provides the most complete protection possible for high
amperage circuits.
BSS 5117
BSS 5118
BSS 5119
BSS 5120
BSS 5121
5005
5503
Max Amps
300A
750A
Max torque
110 in-lb
107 in-lb
Mounting
#10
1/4”
Cable size
2/0
4/0
ANL fuses
35-300 amps
35-750 amp
Dimensions
L: 4.5” x W: 1.5” x H: 1.65”
L: 7” x W: 2” x H: 2.3”
Blue Sea Systems ANL Fuses
ANL fuses for the 5503 & 5005 series fuse blocks.
BSS 5165*
BSS 5122*
BSS 5123
BSS 5124
BSS 5125*
BSS 5126*
BSS 5127
BSS 5128
BSS 5129
BSS 5130*
BSS 5131
BSS 5132*
BSS 5133
BSS 5134*
BSS 5135*
BSS 5136
BSS 5137*
BSS 5161*
BSS 5163*
40 amp (IP)
50 amp (IP)
60 amp (IP)
80 amp (IP)
100 amp (IP)
130 amp (IP)
150 amp (IP)
175 amp (IP)
200 amp (IP)
225 amp (IP)
250 amp (IP)
275 amp (IP)
300 amp (IP)
325 amp (IP)
350 amp (IP)
400 amp (IP)
500 amp (IP)
600 amp
750 amp
(IP) Ignition protected, SAE J1171
*Request Items
225 amp
250 amp
300 amp
350 amp
400 amp
Blue Sea Systems
MEGA or AMG Safety Fuse Block
▪▪Ignition protected for installation aboard gasoline or diesel
powered boats
▪▪Sealed cover protects fusest
▪▪Insulating cover satisfies ABYC/USCG requirements
▪▪Cover breakouts allow wire access in any direction
▪▪300A maximum with 2/0 cable
▪▪Fuses sold separately (see below)
▪▪L: 4.92” x W: 1.51”
BSS 7721
Blue Sea Systems MEGA or AMG Fuses
An economical, 100 to 300 amperage fuse specifically
designed for low voltage applications. 32V DC max.
▪▪Sold by the each
BSS 5101
BSS 5102
BSS 5103
BSS 5104*
BSS 5105
BSS 5106*
BSS 5107
100 amp
125 amp
150 amp
175 amp
200 amp
225 amp
250 amp
* Request Items
35
Blue Sea Systems
Blue Sea Systems
Split Bus Fuse Block
▪▪Accepts 5/16” (M8) ring terminals
▪▪Insulating cover satisfies ABYC/USCG
insulation requirements
▪▪Insulating cover breakouts allow wire
access in three directions
▪▪Insert molded studs ensure secure fuse
mounting
▪▪Stainless steel studs provide resistance to
corrosion and high torque for excellent electrical contact
▪▪UL 94-V0 base resists high heat
▪▪L: 4.07” x W: 1.5”
▪▪Fuse sold seperately
▪▪Provides two isolated groups of six ATO/ATC
circuits
▪▪For use with either two isolated batteries or
with a single battery providing a mix of 24
hour and switched circuits
▪▪Screw terminals for securing wires accept ring
terminals
▪▪One-piece stainless flange nuts ensure safe and secure
connections
▪▪Clear insulating cover with label recesses and storage for two
fuses, satisfies ABYC/USCG insulation requirements
▪▪Easy to open, push button latch for easy access to fuses
▪▪Tin-plated copper buses and fuse clips
▪▪Max Amps: Block 100A, Circuit 30A
▪▪H: 7.35” x W: 3.32” x D: 1.51”
▪▪ST blade fuses sold separately
▪▪Ignition protected for installation
aboard gasoline or diesel powered
boats
▪▪Sealed cover protects fuses from the harsh marine environment
▪▪Insulating cover satisfies ABYC/USCG insulation requirements
▪▪Cover breakouts allow wire access in any direction
▪▪200A maximum with 2/0 cable
▪▪Fuses sold separately (see below)
▪▪L: 4.92” x W: 1.51”
BSS 7720
Blue Sea Systems MIDI or AMI Fuses
BSS 5032
Blue Sea Systems ATO/ATC Fuse Blocks
▪▪Clear insulating cover with label recesses for standard Blue Sea
Systems’ labels
▪▪Cover insulates all conductive parts, satisfying ABYC/USCG
requirements and storing spare fuses
▪▪Tin-plated copper buses and beryllium copper fuse clips give
full 30 Ampere rating per circuit.
▪▪Stud: #10-32
▪▪Uses ATO fuses
▪▪Includes ‘Blank’ lables
▪▪Insulated cover protects connections
▪▪Clear cover offers visible indication of blown fuses
▪▪Color-coded for easy amperage identification
▪▪Ignition protected to SAE J1171 when used with Blue Sea
Systems SafetyHub family of products
▪▪Sold in packages of 2
BSS 5250*
BSS 5251
BSS 5252
BSS 5253*
BSS 5254*
BSS 5255
BSS 5256
BSS 5257
BSS 5258
BSS 5259*
BSS 5260
30 amp
40 amp
50 amp
60 amp
70 amp
80 amp
100 amp
125 amp
150 amp
175 amp
200 amp
*Request Items
Electrical / Electronics
Blue Sea Systems
MIDI or AMI Safety Fuse Block
W
E
BSS 5001
N
Blue Sea Systems
MEGA or AMG Safety Fuse Block
5025
5033
Part #
Description
A
B
C
BSS 5025
6 Circuit w/ground
3.315"
4.894"
3.881”
BSS 5026
12 Circuit w/ground
3.315"
6.472"
5.459"
BSS 5033
6 Circuit (no cover)
3.315"
3.652"
2.639"
Blue Sea Systems
Blue Sea Systems
ST CLB 12 Volt Breaker Blocks
Blue Sea Systems
SafetyHub 100 Fuse Block
▪▪Quick connect clips allow circuit breakers to
snap easily into place
▪▪Tin-plated copper busses and screw terminals
▪▪Clear insulating cover satisfies ABYC/USCG
insulation requirements
▪▪Breakouts allow wire access in two directions
▪▪Accepts ring terminals
▪▪Optional push button waterproof boots or dress
nuts can be installed over cover
▪▪CLB circuit breakers sold separately (see page 38)
Combines an ignition protected fuse block and
integrated connecting plugs. It consolidates
seven circuits from 1A-200A, eliminates loose
wires, and protects fuses from explosive fumes.
▪▪Three 30A-200A MIDI fuses for high-amp
circuits including panel feeds, windlasses,
and stereo amplifiers
▪▪Four 1A-20A ATO/ATC fuses ideal for circuits including bilge
pumps, alarms, and clock memory
▪▪Sealed cover protects fuses from the harsh marine environment:
IP66 rating-protected against powerful water jets
▪▪Integrated connector plugs eliminate loose wires and provide a
secure, waterproof connection
▪▪Fuses sold seperately
▪▪4” x 5-3/4”
Positions
Neg. Bus
Source
Height
BSS 5050
6
-
Independent
6.69”
BSS 5051
12
-
Independent
11.19”
BSS 5052
6
Yes
Common
6.69”
BSS 5054
12
Yes
Common
11.19”
Certifications & Agency Standards
▪▪Ignition protected fusing meets Coast Guard and ABYC
requirements for installation on gasoline or diesel powered boats
▪▪Meets ISO 8846 ignition protection, and SAE J1171 external
ignition protection requirements
BSS 7725
Blue Sea Systems Terminal Fuse Block
Blue Sea Systems Fuse Blocks
▪▪Clear insulating cover with label recesses for labels
▪▪Cover insulates conductive parts
▪▪Nickel plated metal components
▪▪Copper contacts give a 30 amp rating
▪▪Can use AGC, MDL and all other 3AG glass fuses
▪▪Max voltage: 32
BSS 5015
BSS 5018*
*Request Item
5015
AGC 6 circuit with ground bus
AGC 6 circuit without ground bus
Consolidates up to six independently-sourced branch circuits in
one compact fuse block. These blocks can be modified to combine
circuits together. PN 9217 Terminal block jumpers (2 included)
can be used on the source side of the fuse block. This allows one
wire coming in to the fuse block to supply two or more loads, while
maintaining separate fuse protection for each
circuit.
▪▪Fuse blocks w/covers include 20 write-on
circuit labels
▪▪Tin-plated copper buses and fuse clips
▪▪Accepts ring or spade type terminals
▪▪Accepts ATO and ATC fast acting blade fuses
▪▪H: 5.23” x W: 2.1”
BSS 5035
▪▪Satisfies ABYC 7” circuit protection rule
▪▪Mounts on 3/8” battery post, battery switch, and bussbar
terminals
▪▪Compact, high amp fuse - appropriate for DC main, inverter,
windlass, and bow thruster circuit protection
▪▪Provides high current protection in tight spaces
▪▪Weatherproof - suitable for open cockpit areas
▪▪Insulating nut and cap prevents accidental shorts
▪▪Maximum volts: 58 VDC
▪▪Terminal stud: 1/4”-20
▪▪L: 2.4” x W: .79” x H: 1.75”
▪▪Fuses sold separately (see below)
BSS 5191
Fuse block
BSS 5175*
BSS 5177
30 amp fuse
50 amp fuse
Accessories:
Blue Sea Systems
Independent Sourced Circuit ST Blade Fuse Blocks
With cover
W
E
Part #
N
Electrical / Electronics
36
*Request Item
37
Blue Sea Systems
Blue Sea Systems Maxi Fuses
BSS 5023
▪▪Tin-plated connector blades for corrosion resistance
▪▪Visible indication of blown condition
W
Amps
Colour
Pkg
BSS 5235100
1
Black
25
BSS 5236100
2
Clear
25
BSS 5237100
3
Pink
25
BSS 5239100
5
Tan
25
BSS 5240100
7.5
Brown
25
BSS 5240
7.5
Brown
2
BSS 5241100
10
Red
25
BSS 5241
10
Red
2
BSS 5242100
15
Blue
25
BSS 5242
15
Blue
2
BSS 5243100
20
Yelliow
25
BSS 5243
20
Yellow
2
BSS 5244100
25
Clear
25
BSS 5244
25
Clear
2
BSS 5245100
30
Green
25
BSS 5245
30
Green
2
BSS 5291
BSS 5292
BSS 5293
BSS 5294
BSS 5295
BSS 5296
BSS 5297
BSS 5298
BSS 5299
3 amp
5 amp
7.5 amp
10 amp
15 amp
20 amp
25 amp
30 amp
40 amp
Blue Sea Systems
Weatherproof AGC Fuse Holder
▪▪Rated to 20 [email protected] 12 volts
▪▪Fuse not included
BSS 5021
Blue Sea Systems AGC Fuses
▪▪Visible indication of blown condition
▪▪Fast acting
▪▪25/pkg
BSS 5204100
BSS 5206100
BSS 5208100
BSS 5210100
BSS 5213100
BSS 5215100
BSS 5217100
BSS 5218100
BSS 5219100
BSS 5220100
1 amp
2 amp
3 amp
5 amp
7.5 amp
10 amp
15 amp
20 amp
25 amp
30 amp
W
E
E
▪▪Tin-plated connector blades
▪▪Fast acting blade fuse
▪▪Max. voltage: 32VDC
ATC Fuses
EasyID illuminated ATC blade fuses use LED technology
to show that a fuse has blown, making them easy to spot
in fuse panels tucked up under dark dashboards.
▪▪Replaces non illuminating ATO or ATC fuses
▪▪Tin-plated connector blades
▪▪Max. voltage: 32VDC
▪▪2/pkg
N
Blue Sea Systems ATO/ATC Fuses
Part #
Blue Sea Systems Easy ID
30 amp
40 amp
50 amp
60 amp
70 amp
80 amp
N
5138
5139
5140
5141
5142
5143
Electrical / Electronics
▪▪Easy to install 4 ATO/ATC fused circuits
▪▪Mounts on the battery terminal stud
▪▪Screw terminals for securing wires
▪▪Four nylon insulated ring terminals included
▪▪Insulating cover included
▪▪Accepts Small Format circuit labels
▪▪Includes 1 fuse
▪▪Maximum amperage: 100A per block, 30A per circuit
▪▪Mounting: clearance for 3/8” [M10] stud
▪▪Screw terminal type: #8-32 Screws with captive star lock washer
BSS 5006
BSS
BSS
BSS
BSS
BSS
BSS
W
E
▪▪For 30 - 80 amp fusing
▪▪Terminal cover insulates all conductive parts
▪▪Accepts wire sizes up to 4 ga.
▪▪For use on systems up to 32 V DC
▪▪Max. 80 amps
▪▪10/32” screw terminals
▪▪W: 2.015” x H: 2.89”
▪▪Fuses sold separately (see below)
N
Blue Sea Systems
Battery Mount Fuse Block
Blue Sea Systems Maxi Fuse Block
38
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems
Push Button Reset Only CLB Breakers
Low cost circuit breaker in a compact design enables
high density protection configurations. “Trip free” cannot be held closed after trip. Max. voltage: 28 DC
Blue Sea Systems
AC Flat Rocker Circuit Breaker
BSS 7054
BSS 7056
BSS 7057
BSS 7058
BSS 7059
BSS 7061
10 amp
15 amp
20 amp
25 amp
30 amp
40 amp
▪▪30A double pole residual current circuit breaker (ELCI)
▪▪Provides over current and leakage protection per ABYC
E-11 for whole boat shore power protection
▪▪Meets UL 1500 external ignition protection requirements
▪▪Trips on short circuit, overload, or leakage to ground
▪▪Front panel mount-installed in a power distribution panel
BSS 4135
Clear boot cover
Parts:
BSS 3102100
Blue Sea Systems
Bussmann Series Circuit Breakers
Blue Sea Systems
A-Series Flat Rocker AC/DC Circuit Breakers
▪▪Rocker actuator is flush in the ‘ON’ position
▪▪Colour actuator indicates ‘OFF’ position
▪▪‘Trip Free’ design cannot be held ‘ON’
▪▪Prevents accidental switching of 24 hour circuits
▪▪ON/OFF symbols support vertical or horizontal mounting
▪▪W 2.31" x H .75"
BSS 7406
30 amp
Interrupt Rating............................. 5,000 amp
Maximum Voltage......................... 32 VDC
Circuit Breaker Type..................... Magnetic Hydraulic—Trip free
Operating Temperature Range..... -40°C to +85°C
Terminal Screw............................. 30° Angled #10-32 Stainless Steel
Recommended torque 14-15 in-lb
Rated Switch Cycles.................... 10,000 @ rated amperage/voltage
Mounting Screw............................ #6-32 Stainless Steel
Recommended torque 6-8 in-lb
▪▪Combines switching & circuit protection
▪▪All components meet SAE J1171 requirements
▪▪Clear, single lever operation
▪▪“Trip Free” design
▪▪Vapor-proof/waterproof
▪▪Recessed mounting holes for clean appearance
▪▪Self-trimming case
▪▪Large clearance around terminal studs
▪▪Robust 5/16” terminals
▪▪70XX Series - H: 3.386” x W: 2.26” x D: 2.45”
▪▪Cutout: 2.125”
▪▪71XX Series - H: 3.439” x W: 2.323” x 1.797”
Surface Mount
Panel Mount
BSS 7036
BSS 7038
BSS 7039
BSS 7041
BSS 7042
BSS 7044
BSS 7048
30 amp
40 amp
50 amp
70 amp
80 amp
100 amp
150 amp
Blue Sea Systems
Single Pole AC/DC Magnetic Breakers
Combines switching & circuit protection into
a single device A Series breakers. White.
BSS 7202
BSS 7204
BSS 7206
BSS 7208
BSS 7210
BSS 7214
BSS 7218
BSS 7222
BSS 7238
BSS 7230
5, White
10, Black
10, White
15, Black
15, White
20, White
25, White
30, White
30, White
50, White
Operating Temp Range:........-40 degrees C to +85 degrees C
Rated Switch Cycles:............10,000 @ rated amperage and voltage
Maximum Voltage Rating:.....277 Volts AC, 65 VDC
Mounting Screw:....................#8-32 - Recommended torque 6-8 lbs
Circuit Breaker Type:.............Magnetic Hydraulic - trip free
Terminal Screw:.....................#10-32 S/S with tooth lock washer
Recommended torque 14-15 in-lb
BSS 7136
BSS 7138
BSS 7139
BSS 7140
BSS 7141
BSS 7142
BSS 7144
BSS 7146
BSS 7148
30 amp
40 amp
50 amp
60 amp
70 amp
80 amp
100 amp
120 amp
150 amp
Case Material ...............Thermoset Polyester
Amperage.....................25-150 amperes
Voltage Rating .............48 volts DC Maximum
Interrupt Rating.............5,000 [email protected] VDC
3,000 [email protected] VDC
1,500 [email protected] VDC
Blue Sea Systems Panel Accessories
Black breaker screws fit all single and double
pole A, B and C circuit breakers.
BSS 80356/pkg
7039
7139
Blue Sea Systems
Blue Sea Systems
Vessel Systems Monitor VSM 422
▪▪Visible reset lever shows open condition
▪▪Ignition protected - Safe for installation aboard
gasoline powered boats
▪▪Meets SAE J1171 external ignition protection
requirements
▪▪Weather Resistant
▪▪Combines switching and circuit breaker function
into one unit
▪▪”Trip Free” - cannot be held closed after trip
▪▪Three intuitive display modes
▪▪Flexible case design offers three mounting
options
▪▪Fully programmable legends and adjustable
alarm functions can be customized to fit every boat
Panel
Mount
Surface
Mount
Amps
-
BSS 7182
40
-
BSS 7183
50
-
BSS 7184
60
-
BSS 7185
70
-
BSS 7186
80
BSS 7087
BSS 7187
100
-
BSS 7188
120
BSS 7089
BSS 7189
150
▪▪Monitors DC systems —voltage, amperage, battery state
of charge - amp hours remaining, time remaining, % charge,
battery temperature (alarms for all values)
▪▪Monitors AC systems —voltage, amperage, watts, frequency
(alarms for voltage, amperage, and frequency)
Panel Mount
Surface Mount
▪▪Included in retail packaging—head unit, surface mount bezel,
surface mount gasket, DC current shunt 8255, AC current
transformer 8256, battery temperature sensor 1820, connectors,
and mounting screws
▪▪Monitors tank levels —fuel, water, waste, (alarms for high level
waste, low level fuel, and water) *Senders are optional*
▪▪Monitors bilge —active, cycle count, volume, duration (alarms
for cycles, volume, duration)
▪▪W: 4.5” x H: 3” x D: 1”
BSS 1800
Blue Sea Systems
Ultrasonic Tank Senders
▪▪Accurate - used with the Vessel Systems Monitor
1810
VSM 422 PN 1800 above—can be precisely
calibrated for each tank
▪▪Reliable - SSI Technologies, Inc. Fluid-Trac is
non-contacting eliminating any mechanical moving parts that
can wear and cause intermittent or complete signal loss
▪▪Digital filtering - eliminates errors due to liquids sloshing in
mobile tanks
BSS 1810
BSS 1811*
*Request Items
Diesel, water or waste, max tank depth 32"
Gasoline only, max tank depth 24”
Electrical / Electronics
Blue Sea Systems
Bussmann 285 Series Circuit Breakers
39
40
Blue Sea Systems
Electrical / Electronics
Blue Sea Systems
Water Resistant DC Circuit Breaker Panels
▪▪Designed for fly bridge and open cockpit
applications
▪▪Rated IP66 - “Use on ship decks”
▪▪Ignition protected - safe for installation
aboard gasoline powered boats
▪▪Installed switch is ON-OFF
▪▪Push button circuit breaker with waterproof
boot
▪▪Heavy 1/8” aluminium material
▪▪Two-part polyurethane white finish
▪▪Water resistant Contura switches
▪▪“ON” indicating LEDs embedded in switch
▪▪Watertight mounting gasket
▪▪Mil-spec chemical treatment to protect from corrosion
▪▪Includes set of 60 common DC labels
▪▪4.25” x 5.25”
BSS 8272* Arctic White
BSS 8372 Black
* Request Item
Blue Sea Systems
Vertical Water Resistant DC Fuse Panels
▪▪Specifications match the vertical panels
▪▪Includes set of 60 common DC labels
▪▪Designed for height restricted installations
▪▪Rated IP66 - “Use on ship decks”
NOTE: Water resistant panel labels are not back-lightable
BSS 8262
BSS 8261*
4 position, 3.75" x 5.25"
8 position, 3.75" x 9.385"
* Request Item
Blue Sea Systems Water
ResistantBilge Pump Control Panel
Specifications match the above
NOTE: Water resistant panel labels are not back-lightable
Voltage:........................................ 12 or 24 volts DC
Switch Rating:.............................. 20 amperes @ 12 volts DC
15 amperes @ 24 volts DC
Switch LED amperage Draw:....... 18 Milliamperes
Circuit Breaker Rating:................. 15 amperes
Panel Cumulative Rating:............. 45 amperes
BSS 8263
(ON)-OFF-AUTO, 3.75" x 2.25"
Blue Sea Systems
Waterproof Contura Switches
▪▪Vibration, shock, thermo-shock, moisture
and salt spray resistant
▪▪Specially manufactured for mounting in Blue
Sea Systems’ water resistant panels
▪▪Ignition protected - safe aboard gasoline
powered boats
▪▪Meets UL1500 and ISO8846 ignition
protection requirements
Part# Grey
Part# Black
Action
LED's
BSS 8230
BSS 8282
SPST, OFF ♦ ON
1
OFF ♦ (ON)
0
BSS 8283
SPDT, ON ♦ OFF ♦ ON
2
SPDT, (ON) ♦ OFF ♦ ON
1
BSS 8231
Blue Sea Systems
Horizontal Water Resistant DC Fuse Panels
Designed for fly bridge and open cockpit applications:
▪▪Water resistant fuse holders accept commonly available AGC
(fast acting) and MDL (slow blow) glass fuses
▪▪Rated IP66 - “Use on ship decks”
▪▪Installed switch is ON-OFF
▪▪Heavy 1/8” aluminium material
▪▪Two-part polyurethane slate gray finish
▪▪Water resistant Contura switches
▪▪“ON” indicating LEDs embedded in switch
▪▪Includes set of 30 common DC labels
▪▪Watertight mounting gasket
▪▪Mil-spec chemical treatment to protect from corrosion
NOTE: Water resistant panel labels are not back-lightable
BSS 8054
BSS 8053
3 position, 3.75" x 5.25"
6 position, 7.50" x 5.25"
Voltage:..............................12 or 24 volts DC
Switch Rating:....................20 amperes @ 12 volts DC
15 amperes @ 24 volts DC
Switch LED amp. Draw:.....18 Milliamperes
Fuse Holder Rating:...........20 amperes max.
BSS 8233
BSS 8234
(ON) ♦ OFF ♦ (ON)
0
BSS 8220
DPDT, (ON) ♦ OFF ♦ ON
1
Blue Sea Systems WeatherDeck
Water Resistant DC Panels
▪▪Designed for fly bridges and open cockpits
▪▪Made from corrosion resistant materials
▪▪Independent label back-lighting circuit for remote
switching and dimming
▪▪UV stabilized and weather resistant face plate
▪▪Rated IP67 - “temporary immersion”
▪▪Rugged UV stabilized waterproof boots
Each panel can be mounted in four different orientations
ATO/ATC blade fuse protects each circuit
BSS 4304
BSS 4306
BSS 4308
4 fuse, Grey
6 fuse, Grey
8 fuse, Grey
3.88" x 4.30"
3.88" x 6.00"
3.88” x 7.70”
Thermal Reset Only Circuit Breaker protects each circuit
BSS 4376*
*Request Item
6 breaker, Grey
4.5" x 6.00"
4306
Blue Sea Systems
Blue Sea Systems
AC Circuit Breaker Panels
▪▪All positive, negative and grounding buses installed, fully pre-wired
▪▪Includes set of 30 common DC labels
▪▪Label back-lighting pre-installed
▪▪All LEDs installed
▪▪Slate grey aluminium panel
▪▪Voltage: 12/24V DC
Part#
Description
WxH
Installed 15A
Breakers
BSS 8023
8 Position
5.25” x 7.50”
5
BSS 8025
3 Position
5.25” x 3.75”
3
These panels are designed as branch circuit breaker panels to work
in conjunction with AC main panels.
▪▪All hot, neutral and safety ground buses installed, fully pre-wired
▪▪Label back-lighting pre-installed
▪▪Detailed installation instructions and cutout template
▪▪All LEDs installed
▪▪Maximum panel amperage - 100 amps
Part #
Circuits
Breakers
Installed
Dimensions
BSS 8059
8
5
7.5” H x 5.25” W
BSS 8058
3
3
3.75” H x 5.25” W
Blue Sea Systems
AC Rotary Switch
8027
8029
▪▪Red reverse polarity indicating LED’s
▪▪Green power available indicating LED’s
▪▪Accepts standard BSS backlight labels
▪▪Max. Amperage 30
▪▪Max. Voltage 600VAC
▪▪H: 3.75" x W: 5.25"
8043
Blue Sea Systems
AC Main Circuit Breaker Panels
BSS 8367
▪▪Slate grey aluminium panel
▪▪Red reverse polarity indicating LED
▪▪Hot, neutral and safety ground buses installed, fully pre-wired
▪▪All LEDs installed
▪▪Maximum panel amperage - 50 amps
▪▪120 volt
Part #
Description
WxH
15A Sgl
Pole
30A Dble
Pole
BSS 8027
Main & 6 Pos
5.25” x 7.50”
3
1
BSS 8029
Main & 1 Pos
5.25” x 3.75”
-
1
BSS 8043
Main & 3 Pos
5.25” x 7.50”
3
1
BSS 8077
Main Only
2.63” x 3.75”
-
1
Blue Sea Systems
AC Source Selector Panel
▪▪Slate grey aluminum panel
▪▪Two double pole 30 amp breakers
▪▪Lockout slide permits connection of only one power source to the system
▪▪Dimensions: 3.75” H x 5.25” W
BSS 8032
Blue Sea Systems Panel
▪▪3 position, vertical circuit breaker panel
▪▪Designed for flybridge and open cockpit applications
▪▪Panel front is rated IP66-Protected against powerful water jets
▪▪Ignition protected-safe for installation in gasoline powered boats
▪▪ON-OFF Contura Switches
▪▪ON indicating LEDs embedded in switch
▪▪Watertight mounting gasket
▪▪Push Button Reset-Only circuit breakers with waterproof boots
▪▪W: 4.5” x H: 3.75”
BSS 8374
Electrical / Electronics
Blue Sea Systems
DC Toggle Circuit Breaker Panels
41
Electrical / Electronics
42
Blue Sea Systems
Blue Sea Systems
Panel Mounted Toggle Switches
Blue Sea Systems
Circuit Breaker Mounting Panel
▪▪For applications such as starters, bilge
pumps, wipers, lights, etc.
▪▪Easily mounts into standard 5/8" circuit
breaker mounting hole
▪▪Nickel plated brass and phenolic
noncorrosive construction
▪▪Mounts A-Series double pole toggle
circuit breakers
▪▪1/8” aluminum 5052 alloy
▪▪Accepts Blue Sea Systems’ large
format panel label
▪▪2-5/8" x 3-3/4"
BSS 8204SPST/OFF-ON
BSS 8207SPDT/(ON)-OFF-ON
BSS 8173
Blue Sea Systems
Lexan Label Sets
Blue Sea Systems
WeatherDeck Toggle Switches
▪▪Specially manufactured by Carling for use in Blue Sea Systems’
WeatherDeck Panels
▪▪Nickel-plated brass and phenolic non-corrosive construction
▪▪Rated 15 amp @ 12VDC
▪▪1/2” dia cutout
4150
4155
Part
Action
Pole/Throw
BSS 4150
OFF ♦ ON
SPST
BSS 4151
OFF ♦ (ON)
SPST
BSS 4152
ON ♦ OFF ♦ ON
SPDT
BSS 4153
(ON) ♦ OFF ♦ ON
SPDT
BSS 4154
(ON) ♦ OFF ♦ (ON)
SPDT
BSS 4155
ON ♦ OFF ♦ ON
DPDT
( ) = Momentary
Parts:
BSS 4138
Waterproof boot
Rating
10A @ 250VAC
15A @ 125VAC
15A @ 12VDC
5A @ 30VDC
BSS 8030*
DC basic label set comes with:
Accessory
Bilge Pump
Depth Sounder
Fan
GPS
Lights
Radar
Sailing Instruments
Steaming Light
Tri Colour Light
Anchor Light Blower
Electronics
Foredeck Lights
Horn
Macerator Pump
Refrigerator
Spare
Stereo
VHF
BSS 8031*
AC basic label set comes with:
Blank
Entertainment Centre
Accessory
FWD Cabin Lights
AFT Cabin Lights
FWD Cabin Outlets
AFT Cabin Outlets
Galley
Air Conditioner
Galley Outlets
Air Conditioner 2
Heater
AppliancesInverter
Battery Charger
Lights
Cabin Outlets
Macerator Pump
Computer
Main Cabin Lights
* Request Items
Autopilot
Compass Light
Engine Instruments
FWD Cabin Lights
Knot meter
Main Cabin Lights
Running Lights
Spreader Lights
Strobe Light
Water Pressure
Main Cabin Outlets
Microwave
Outlets
Refrigerator
Spare
Stove
TV/Stereo
VCR
Washer/Dryer
Water Heater
Blue Sea Systems
Blue Sea Systems
Panel Backlight
Back light system is easily installed in any
Blue Sea Systems circuit breaker panel. The
8065 module is adaptable to a 8, 5 or 3 position panel.
▪▪6" 18 AWG wire leads
▪▪5 milliwatt draw
12 VDC, 8/5/3 position
Blue Sea Systems
Panel Backs
Panel backs insulate the backside of electrical
panels that protrude into lockers, machinery
spaces and living areas. They are made from
black ABS thermoplastic and can be easily drilled
to provide wire exits. 3" deep.
BSS 4026
BSS 4027
5.25” x 3.75”
5.25” x 7.50”
Blue Sea Systems
LED Indicator Lights
▪▪Easily installed in any Blue Seas panel
▪▪Simple push-in installation mounts in any thickness material
BSS 8033
BSS 8171
BSS 8172
Amber
Red
Green
12/24 volt
12/24 volt
12/24 volt
BSS 8034
BSS 8066
Green
Red
120 volt
120 volt
Blue Sea Systems
Toggle Guard
Protect your circuit breakers against being
accidentally switched ON or OFF. Can be
used on any brand of circuit breaker panel
using standard A or B-Series circuit breakers. Made from glassfilled nylon. Mounting hole accepts #6 flat head screws (included).
BSS 4100
Blue Sea Systems
AC Lockout Slide
Allows only 1 of a pair of double-pole AC
circuit breakers to be activated at a time,
guaranteeing that AC power from 2 sources
will not be mixed. Fits all double pole A
and B series circuit breakers.
BSS 4125
Blue Sea Systems
DC Analog Ammeters
These analog meters can be surface or flush
mounted in a Blue Sea panel.
▪▪Simple 2-wire connection from shunt, no
other power required
▪▪Meter senses and powers from shunt connection
▪▪Packaged with shunt (except 8005 with internal shunt)
▪▪H: 2.375 x W: 2.625
BSS 8005
BSS 8022
0-25 amp DC
0-50 amp DC
Blue Sea Systems
Analog DC Voltmeter
▪▪Displays to .2 volt
▪▪Draws only 1 milliamperes
▪▪Accurate to 3% of scale range
▪▪H: 2.375 x W: 2.625
BSS 8003
8-16 VDC
Electrical / Electronics
BSS 8065
43
44
Blue Sea Systems
Blue Sea Systems
Terminal Blocks
Electrical / Electronics
Blue Sea Systems
Power Bars
Fabricated from a solid block of CDA110 copper. 8-32
terminals on the bus ends provide attachment points for
smaller circuits. All metal components are tin plated for
corrosion resistance and superior conductivity.
▪▪Rated at 600 amps continuous duty, max. 48 volts DC
▪▪Polycarbonate base
BSS 2104
BSS 2107
4 x 3/8” -16 stud terminal, Length: 7”
8 x 3/8” -16 stud terminal, Length: 11.375
Blue Sea Systems
Maxi Bus Bars
▪▪Rated 250 amps continuous
▪▪Max. 48 VDC
▪▪Tinned plated copper
▪▪Mounting holes: #10 screws
Part #
2126
Screws
Studs
Dimensions
2 x 5/16”-18
7.75" x 1.5"
BSS 2126
-
6 x 5/16”-18
7.75” x 1.5”
The 4.2" long mini bus was designed
for mounting in tight spaces. All
conductive components are tin plated
copper.
▪▪Mounts with 2 #10 screws
▪▪100 amps continuous
▪▪Max. 48 VDC
▪▪Dimensions: 7/8" x 4-3/16"
BSS 2305
Terminal
BSS 2300
10 x 8-32
1.25” x 6.1”
Screw
BSS 2301
10 x 8-32
1.25" x 6.1"
Screw
BSS 2302
20 x 8-32
1.25" x 9.25"
Screw
BSS 2303
4 x 1/4”
1.25" x 6.1"
Stud
Recommend for all positive connectors
on board. Heavy gauge red ABS.
BSS 2715
Fits 2301/2303 bus bar
The Dual Bus provides two isolated busses to provide
both positive and negative circuits on the same block.
▪▪Tin plated copper
▪▪Current rating: 100 amps, max. 48 volts DC
▪▪#10 mounting holes, #8/32 mounting screws
2314
BSS 2701
BSS 2702
Size/Type
Terminal
Dimensions
8/32" Screw
5
.875" x 4.2"
Same as above, complete with cover
10/24" Stud
4
▪▪Continuous amperage: 250 AC/DC
▪▪Voltage rating: 300 VAC Max / 48 VDC Max
▪▪Bus material: tin-plated copper
▪▪Base material: reinforced polycarbonate
▪▪Cover material: ABS
▪▪4 x 5/16” -18
5+/5-, 3.01” x 1.85”
10+/10-, 5.06” x 1.85”
Covers:
2305
Blue Sea Systems
Stud Terminal
BSS 2127
Dimensions
Blue Sea Systems
Dual Bus Bar
Blue Sea Systems
Mini Bus
BSS 2314
Circuits
Blue Sea Systems Insulating Cover
12 x #10-24
BSS 2304
Part #
2105
BSS 2105
Part #
Bus bars are used to consolidate multiple
negative wires or to create a positive bus
for feeding multiple circuits. The copper
bus is tin plated for corrosion resistance and
superior conductivity. Two brass 1/4-20 stud
connectors with oversize brass hex nuts provide attachment for
the main feed or ground cables.
▪▪130 amps continuous
▪▪Max. 48 VDC
.875" x 4.2"
BSS 2709
Cover for 2701
45
Blue Sea Systems
Blue Sea Systems
Independent Terminal Blocks
2408
Part #
Circuits
amps
Screw
Dimensions
BSS 2402*
2
20
#6
11/16" x 1-7/16"
BSS 2404
4
20
#6
11/16" x 2-1/8"
BSS 2406
6
20
#6
11/16" x 2-7/8"
BSS 2408
8
20
#6
11/16" x 3-3/4"
BSS 2410
10
20
#6
11/16" x 4-1/2"
BSS 2502
2
30
#8
1-5/16" x 2-1/16"
BSS 2504
4
30
#8
1-5/16" x 3-3/16"
BSS 2506
6
30
#8
1-5/16" x 4-5/16"
BSS 2508
8
30
#8
1-5/16" x 5-1/2"
BSS 2510
10
30
#8
1-5/16" x 6-5/8"
8
3/8”
#10
BSS 1991
12
3/8”
#10
BSS 1992
8
5/16”
#10
BSS 1993
12
5/16”
#10
Provides a waterproof side entry for antenna cables
without requiring removal of the factory installed
connector.
▪▪Simple one-piece design for easy side mount
installations
▪▪Low profile, contoured edge reduces the risk of
tangling lines
▪▪#1007100 includes a polished stainless steel dress cap,
which conceals mounting hardware, matches other
deck hardware and offers protection from UV
▪▪Includes all fasteners
▪▪Max. cable diameter: .28”
BSS 1007
BSS 1007100
W
BSS 1990
1/4" stud, 5 x 10/32 screw terminal
E
Mount
▪▪Combines negative and positive buses on one
block
▪▪Clear lexan lid meets ABYC insulation requirements
N
Stud Size
Dual Bus Plus
Blue Sea Systems Side Entry Cable Clams
W
Studs
Blue Sea Systems Dual Bus Plus
BSS 2722
E
Part #
2500 Series, 5/pkg
2400 Series, 5/pkg
▪▪Continuous amperage 150 amperes DC/130 amperes AC
▪▪Voltage rating 48 volts DC maximum
▪▪300 volts AC maximum
▪▪Bus material tin-plated copper
▪▪Base material ABS
▪▪Cover material clear polycarbonate
▪▪4.875” x 2.58”
N
Complex wiring systems require a single point to consolidate
large and small conductors. The PowerBar 1000 offers a 1,000
Amp busbar with various size studs and screws
to connect conductors and fuse blocks.
▪▪Tin plated pure electrical copper for
maximum conductivity
▪▪Stepped bus design offers two elevations for
1990
conductors which doubles the density of the
wire loom compared to traditional bus bars
▪▪Busbar and fuse block elevations match
common fuse blocks allowing for multiple
fuse block attachment, eliminating the need
1991
for connecting cables
▪▪One-piece serrated flange nuts ensure
correct and secure connections
▪▪Stainless steel 8-32 screws with captive lock
washers for securing smaller gauge wires
▪▪Busbar may be cut to a shorter length to
1992
accommodate constricted spaces
▪▪Bi-directional busbar end caps allow the
ganging of additional busbars
▪▪Snap on insulating cover meets ABYC and
USCG requirements and includes label
1993
recess
▪▪Continuous Rating: 1000A
▪▪Bus Material: Tin-Plated Copper C11000
BSS 9217
BSS 9218
Specification:
*Request Item
Blue Sea Systems Powerbars
These handy tinned brass circuit jumpers can be
used to common one or more circuits on Series
#2400 & #2500 independent connector blocks.
Electrical / Electronics
Our independent connectors are the
highest quality terminal blocks. They
are closed back, which unlike the
cheaper open back styles, provide
2508
complete electrical and moisture
insulation from the mounting surface.
Metal components are nickel plated
brass. Screws are combination head phillips/slot type. 2400 series
have high temperature nylon bases, rated to 300V. The 2500 Series
have phenolic bases, rated to 600V.
Blue Sea Systems
Independent Connector Jumpers
With stainless cap
Blue Sea Systems Cable Clams
Cable Clams allow a waterproof through deck
installation of LORAN, GPS and other
cables. Cable Clams fit any size cable and
are easily installed through the use of a
seal that can be easily drilled, slit, slipped
over the cable and then compressed inside
the Cable Clam. The cable can be quickly
removed and the deck ring sealed with the
waterproof screw plug.
▪▪Available with a polished stainless steel
dress cap, which conceals mounting
hardware, matches other deck hardware
Standard
and offers protection from UV
Standard
Part #
Stainless
Part #
Stainless
Max. Cable
Outside
Diameter
Height
1-3/4"
7/8"
BSS 1001
BSS 1001100
.31"
BSS 1002
BSS 1002100
.44"
2"
7/8"
BSS 1003
BSS 1003100
.56"
2-1/2"
1-3/16"
46
Blue Sea Systems
N
Blue Sea Systems
Battery Mount Busbars
W
E
Electrical / Electronics
▪▪Maximum voltage: 32 VDC
▪▪Continuous rating: 100 ADC
▪▪Bus material: Tin-plated copper C11000
▪▪Mounting hole: Clearance for 3/8 [M10] stud
▪▪Screw terminal : #8-32 screws with captive star lock washer
BSS 2340
Power Posts can be used on either the positive
cables to branch out to the increasing number
of high amperage appliances on modern boats
or on negative cables as a convenient ground
cable collection point.
▪▪Insulator cap protects against accidental grounding
▪▪Base is glass filled black nylon
▪▪Not rated
▪▪Max. 48 VDC
Size
Description
BSS 2011
Small
1/4” x 3/4” Stud
BSS 2002
Large
5/16” x 7/8” Stud
BSS 2003
Large
3/8” x 7/8" Stud
1/4” x 1” Stud
BSS 2102
5/16” x 3/4” Stud
BSS 2103
3/8” x 3/4” Stud
Blue Sea Systems
Dual Power Post Connectors
▪▪Max Voltage Rating: 48 Volts DC
▪▪Mounting holes #10 screws
▪▪Designed for high amp conductors
▪▪Includes one black and one red insulator
▪▪For outboard engine installation when factory
cables need to be extended
▪▪L: 2.75” x W: 1.875” x H: 1.75”
BSS 2017
BSS 2018
2 x 3/8” terminal studs
1 x 5/16” & 1 x 3/8” terminal studs
Colour
3
Red
BSS 4010
8-4
2
Red
BSS 4011
8-4
2
Black
BSS 4012
2-2/0
1
Red
BSS 4013
2-2/0
1
Black
BSS 4014
3/0-4/0
1
Red
BSS 4015
3/0-4/0
1
Black
Blue Sea Systems Cable Caps
▪▪For batteries with integral marine
terminals
▪▪For single cable only
▪▪Rotating tops allow cable leads at any angle
Part #
BSS 4001
Gauge
Opening
Colour
4, 2, 1
1/2"
Red/Black
W
BSS 2101
Pkg. Qty.
18-10
E
Description
Cable Size
BSS 4008
N
Power Post + has eight 8-32 brass screws which provide a
common distribution bus for branch circuits. Power Post + is
useful as a general purpose common distribution bus and battery
cable connector, especially for connecting sensitive electronics
near batteries.
▪▪150 amps continuous
▪▪Max. 48 VDC
Part #
Cable cap stud insulators are made in four sizes to
fit any cable and have large terminal openings to
fit over marine ring terminals. The molded PVC is recognized
under the UL Components program and is elastic enough to
enable standard cable caps to be installed after terminals have
been crimped on the cables.
Part #
Blue Sea Systems
Power Posts
Part #
Blue Sea Systems
Cable Cap Insulators
Standard for use with automotive
batteries with add on marine terminals.
Part #
Gauge
Opening
Colour
BSS 4005
4, 2, 1
1/2"
Red/Black
Blue Sea Systems
Automotive Cable Cap
The molded PVC is recognized under
the UL Components program and is elastic enough
to enable standard cable caps to be installed after
terminals have been crimped on the cables.
▪▪Sold in pairs
Part #
BSS 4016
Cable Size
Colour
4, 2, 1
Red/Black
Blue Sea Systems Battery Box
These heavy wall polyethylene battery
boxes. They feature straight cable entry path,
embedded hold down nuts and stainless steel
hold down bolts for the lid.
▪▪Fits golf cart batteries
▪▪Inside dim: L: 14.75” x W: 10.75” x H:
11.5”
▪▪Outside dim: L: 18.25” x W: 14.25” x H: 13.5”
BSS 4021
47
Blue Sea Systems
Protect Your Boat
Scan to use
the online
Circuit Wizard
With the Correct Size Wire and Fuse
STEP 1 Choose the Correct Wire
D
Select the CIRCUIT TYPE.
• Non-critical circuits with 10% allowable voltage drop include: general lighting, windlasses, bait pumps, general appliances
• Critical circuits with 3% allowable voltage drop include: panel main feeders, bilge blowers, electronics, navigation lights
Find the CIRCUIT LENGTH along the left side of the WIRE SELECTION CHART.
• The circuit length is the length of the negative wire added to the length of the positive wire.
• Calculations are based on 105°C wire. For wire rated at 90°C or lower, or for wire that passes through an engine room,
the first row of the chart, in gray, does not apply.
Intersect the CURRENT FLOW IN AMPS with CIRCUIT LENGTH to identify the correct wire size.
Example: A windlass rated 80A is 25 ft. from the battery. The circuit length is the total length of the positive
and negative wire added together, which in this example is 50 ft. The circuit type is ‘non-critical’, and the correct
wire size is 4 AWG.
WIRE SELECTION CHART
Calculations are based on 105°C wire.
For more detailed calculations, consult the Circuit Wizard at www.circuitwizard.bluesea.com
CIRCUIT TYPE
Non-Critical Critical
CIRCUIT LENGTH
DROP
10% VOLTAGE
CURRENT FLOW IN AMPS
DROP
3% VOLTAGE
0 to 20 ft
0 to 6 ft
30 ft
10 ft
50 ft
15 ft
65 ft
20 ft
80 ft
25 ft
100 ft
30 ft
130 ft
40 ft
165 ft
50 ft
200 ft
60 ft
16
AWG
14
AWG
14
AWG
12
AWG
14
AWG
12
AWG
12
AWG
10
AWG
12
AWG
14
AWG
12
AWG
10
AWG
10
AWG
8
AWG
10
AWG
6
AWG
6
AWG
8
AWG
8
8
AWG
4
AWG
6
AWG
6
AWG
6
AWG
4
AWG
4
AWG
4
AWG
2
AWG
1
AWG
2
AWG
1
8
AWG
0
AWG
8
1
8
AWG
1
8
AWG
0
AWG
1
8
AWG
1
8
AWG
0
AWG
0
AWG
1
8
AWG
0
AWG
0
AWG
2|0
AWG
2|0
AWG
2|0
AWG
3|0
AWG
2|0
AWG
3|0
AWG
1
8
AWG
0
AWG
2|0
AWG
3|0
AWG
3|0
AWG
1
8
AWG
0
AWG
2|0
AWG
0
AWG
2|0
AWG
3|0
AWG
2
AWG
4
AWG
2
AWG
4
AWG
2
AWG
2
AWG
1
AWG
4
AWG
2
AWG
6
AWG
2
AWG
2
AWG
6
AWG
8
4
AWG
4
AWG
6
AWG
2
AWG
3|0
AWG
3|0
AWG
4|0
AWG
4|0
AWG
2|0
AWG
3|0
AWG
4|0
AWG
4|0
AWG
4|0
AWG
4|0
AWG
4|0
AWG
2
AWG
4
AWG
0
AWG
2|0
AWG
3|0
AWG
3|0
AWG
4|0
AWG
4|0
AWG
2
AWG
1
AWG
0
AWG
2
AWG
130 ft
10
AWG
4
AWG
1
AWG
100 ft
120 ft
6
AWG
4
AWG
8
AWG
8
8
AWG
8
8
AWG
6
AWG
90 ft
110 ft
10
AWG
8
AWG
70 ft
80 ft
16
AWG
2|0
AWG
WIRE SIZE CHART Black circles indicate actual diameter of wire (not including insulation)
16
AWG
14
AWG
12
AWG
10
AWG
8
AWG
6
AWG
4
AWG
2
AWG
1
AWG
0
AWG
2|0
AWG
3|0
AWG
U.S. Coast Guard and other regulatory agencies require all circuits, except the starting circuit, to be protected with a circuit breaker or a fuse.
For additional informaiton consult the Circuit Wizard at www.circuitwizard.bluesea.com
© Copyright 2012 Blue Sea systems Inc. All rights reserved. Unauthorized copying or reproduction is a violation of applicable laws.
4|0
AWG
Electrical / Electronics
A
B
C
Locate the CURRENT FLOW IN AMPS of your circuit along the top of the WIRE SELECTION CHART.
48
Blue Sea Systems
STEP 2 Choose the Correct Fuse and Fuse Amperage
Example: For a 4 AWG single 105°C rated wire outside an engine room, the fuse amperage is 150A
Note: Possible fuse amperages for a circuit can fall between a range of maximum and minimum fuse amperages. The procedure above calculates the maximum fuse
amperage which reduces nuisance blows but may offer less protection than a lower amperage fuse. The minimum fuse amperage is calculated by multiplying the current
flow in amps by 125%. If the product instructions specify a fuse amperage, use that value if it is under the maximum amperage found in the above procedure.
If the specified fuse amperage is over the maximum suggested, move down the column and choose the wire size that intersects with the specified fuse amperage.
FUSE SELECTION CHART
Calculations are based on 105°C wire.
For lower temperature rated wire, consult the Circuit Wizard at www.circuitwizard.bluesea.com
L E G E ND
Outside
Engine
Room
Inside
Engine
Room
.25A to 30A
SINGLE
WIRE
16
AWG
AW G W I R E S I Z E
Electrical / Electronics
A
B
Choose a fuse from the list on the top of the FUSE SELECTION CHART by following along the line of the AWG WIRE SIZE
determined from Step 1. Appropriate fuses will have a gray bar that intersects the line.
The appropriate fuse amperage will be found in one of the four gray bars below the selected fuse type.
Single Wire, Outside Engine Room = First column dark gray bar
Single Wire, Inside Engine Room = First column light gray bar
Bundled Wire, Outside Engine Room = Second column dark gray bar
Bundled Wire, Inside Engine Room = Second column light gray bar
Calculations are based on 105°C wire. For wire rated at 80°C or lower, use the fuse amperage for the next smaller wire size.
BUNDLED
WIRES
1A to 30A
SINGLE
WIRE
BUNDLED
WIRES
30A to 80A
SINGLE
WIRE
BUNDLED
WIRES
30A to 200A
30A to 300A
100A to 300A
225A to 400A
35A to 400A
SINGLE
WIRE
SINGLE
WIRE
SINGLE
WIRE
SINGLE
WIRE
SINGLE
WIRE
BUNDLED
WIRES
BUNDLED
WIRES
BUNDLED
WIRES
BUNDLED
WIRES
BUNDLED
WIRES
25A 20A 20A 15A 25A 20A 20A 15A
14
AWG
30A 25A 20A
12
AWG
30A 25A
30A 25A 20A 30A 30A
30A 25A 50A 40A 30A
30A 30A
30A 30A
50A 40A 30A
50A 40A 30A
35A
10
AWG
60A 50A 40A 40A 60A 50A 40A 40A 60A 50A 40A 40A
50A 40A 40A 35A
8
AWG
80A 70A 60A 50A 80A 70A 60A 50A 80A 70A 60A 50A
80A 60A 50A 40A
6
AWG
130A 100A 70A 60A
80A 70A 125A 100A 80A 70A 125A 100A 80A 70A 125A 100A
4
AWG
150A 125A 125A 100A 150A 125A 125A 100A 150A 125A 125A 100A
2
AWG
200A 175A 150A 125A 200A 175A 150A 125A 200A 175A 150A 125A
1
AWG
200A 175A 150A 250A 200A 175A 150A 250A 200A 175A 150A 250A
0
AWG
200A 175A 300A 250A 200A 175A 300A 250A 200A 175A 300A 250A
150A 130A 100A 80A
200A 175A 150A 130A
250A 200A 175A 150A
300A 250A 200A 175A
2|0
AWG
300A 225A 200A
3|0
AWG
250A 225A
250A 225A 400A 350A 250A 225A 400A 350A 250A 225A
4|0
AWG
300A 250A
300A 250A 400A 400A 300A 250A 400A 400A 300A 250A
300A 225A 200A 350A 300A 225A
350A 300A 225A 200A
Full scale fuse comparison:
AGA®
GMA®
ATO®/ATC®
AGC®/MDL®
MAXI
ATM®
AMI®/MIDI®
MEGA®/AMG®
MRBF® Terminal
Class-T
ANL®
49
Blue Sea Systems
STEP 3 Choose the Fuse Holder
Using the same colored headings as in the FUSE SELECTION CHART (step 2), follow the columns down to find fuse holders or
fuse blocks that meet your specific requirements.
Consider environmental factors:
• Ignition protection is required where flammable vapors may accumulate.
Electrical / Electronics
A
B
Example: Engine room and propane locker
Consult American Boat and Yacht Council (ABYC) E-11.5.3 for Ignition Protection
Ignition protection
• Ingress protection protects fuses from spray, washdown, and humidity.
IP66-protected against powerful water jets
Ingress protection
C
Decide between an in-line fuse holder or a fuse block:
• In-line fuse holders are compact and hold a single low-amperage fuse.
• Fuse blocks mount to a solid surface and may hold a single fuse or multiple fuses.
FUSE HOLDER SELECTION CHART
Crimpable In-Line
Fuse Holder
5060
Waterproof In-Line
Fuse Holders
ATO® or ATC® In-Line
Fuse Holders
MAXI™ Fuse Block
AMI® or MIDI®
Safety Fuse Block
5006
7720
5062
MEGA® or AMG®
Fuse Block
CLASS T Fuse Block
ANL® Fuse Blocks
5502
5005
5064
064
5191
5001
065
5065
ST Blade Fuse Blocks
5061
Terminal MRBF
Fuse Blocks
SafetyHub Fuse Blocks
5025
5035
5026
5028
5029
SafetyHub Fuse Blocks
MEGA® or AMG®
Safety Fuse Block
2151
7721
5503
7725
Heavy Duty In-Line
Fuse Holder
Although this process uses information from ABYC E-11
7725
to recommend wire size and circuit protection, it may not
cover all of the unique characteristics that may exist on
a boat. If you have specific questions about your installation
please consult an ABYC certified installer.
7748
5063
ST Glass Fuse Blocks
7748
7727
5015
5018
7727
LEGEND
Ingress protection
Ignition protection
© Copyright 2012 Blue Sea systems Inc. All rights reserved.
Unauthorized copying or reproduction is a violation of applicable laws.
20008
You Can Do it, Protect Your
Boat with the Correct Size
Wire, Fuse, and Fuse Holder
· 20 guides per pack
20010
20" x 17" Deskmat
See page 128 for other You Can Do It Guides and
marketing materials.
We can keep you here longer......very quietly.
Charge Your Batteries Silently While Anchored - Even on Cloudy Days!
♦ Methanol fuel cell battery charger
♦ Fully automatic & maintenance-free
♦ Programmable for different batteries sizes & chemistry
♦ Three models: 80, 140, and 210 amps per day
♦ 10 litre container of fuel equals 925 amps
(About 30 days of typical use)
Remote Panel
www.efoy-comfort.com
51
EFOY
E
N
W
Can be used all year round
With the EFOY COMFORT, you have a reliable electricity
supply when you are on the road or at sea. Whether you are
under a shady tree or in a lonely cove. Irrespective of the
weather and all year round - even at sub-zero temperatures!
When the EFOY COMFORT is installed as recommended,
you will not hear it at all. SFC’s newly developed insulation
and the sound damping system ensure quiet operation. Enjoy
the peace and silence!
The EFOY COMFORT charges the on-board battery
automatically. The integrated charge controller permanently
monitors the charge level of the 12V battery. If necessary, the
EFOY COMFORT starts automatically and switches off again
once the battery is charged. The EFOY COMFORT produces
electricity using the fuel in the fuel cartridge, adding oxygen
from the air. In addition to the electricity, it only produces
waste heat and water vapour containing an insignificant
amount of carbon dioxide.
Fully automatic and maintenance-free
Your EFOY COMFORT supplies electricity as soon as all
connections are properly made. All you have to do is to make
sure that fuel is always supplied. You do not even need to
clean or maintain the EFOY COMFORT. It does not get any
more convenient than this!
Eco-friendly
The EFOY COMFORT is economical in use and does
not produce emissions that harm the environment. It is
extremely eco-friendly!
EFOY Comfort Fuel Cell Battery Chargers
EFY 151 000 210
EFY 151 000 211
EFY 151 000 212
Provides more power than a solar solution
80i kit
140i kit
210i kit
Over the period of one year, EFOY COMFORT provides 3 to
10 times as much electricity as a solar system with the same
power rating. To produce the same amount of electricity as an
EFOY COMFORT 80 (40 W) with solar power, depending on
the country and time of year, you would need a solar system
with an output of between 120 and 400 Wp.
Fuel Cartridges M10
Volume: 2.64 US gallons / 10 litres
Weight: 18.5 lbs / 8.4 kg
Nominal capacity: 11.1 kWh
Dimensions: L: 9.1" x W: 7.6" x D: 12.5"
▪▪Lasts about 30 days of "average" boating
EFY 150 905 099
Very simple to operate remote panel
Parts:
EFY 151 906 005
EFY 151 906 006
EFY 151 075 037
EFY 151 905 021
EFY 150 903 001
EFY 151 077 045
EFY 151 077 051
EFY 151 077 054
EFY 151 077 055
EFY 151 908 020
EFY 151 908 022
Senseline extension cable 8M/26’
Powerline extension cable 8M/26’
Mastervolt-Efoy cable
Extra fuel cartridge holder
Service fluid replacement bottle
Remote panel bezel, flush mount, white
Remote panel bezel, flush mount, black
Remote panel bezel, surface mount, white
Remote panel bezel, surface mount, black
Mounting plate Efoy comfort
Mounting belt Efoy comfort
Standard Accessory Set
- Operating panel (white) with cable
- Mounting plate with belt
- Charge line for battery connection
- Fuel cartridge holder with belt
- Off heat duct Set EFOY COMFORT
- Isolated exhaust hose
- User manual
- Service fluid
The high-quality and user-friendly operating panel
gives you all the key information, clearly arranged,
even the fuel cartridge’s fill level.
It is simplicity at its best.
Fuel Cells
COMFORT 80
COMFORT 140
COMFORT 210
Max. charging power per day
960 Wh/day 80 Ah/day
1728 Wh/day 144 Ah/day
2520 Wh/day 210 Ah/day
Max. nominal power1
40 W
72 W
105 W
Nominal voltage
12 V
12 V
12 V
Max. nominal charging
current @ 12V
3.3 A
6.0 A
8.75 A
Recommended battery
capacity @ 12V
40-160 Ah
60-250 Ah
80-350 Ah
16.5 lbs (7.5 kg)
18 lbs (8.2 kg)
Weight
Nominal consumption / kWh
Noise level @ 7m distance
Operating temperature
Dimensions
15.4 lbs (7 kg)
0.24 US gal (0.9 litre)
25 dB(A)
-4°F to +104°F (-20 to + 40 °C)
L: 17.44 x W: 7.95 x H: 11.34 in (44.3 x 20.2 x 28.8 cm)
Electrical / Electronics
Extremely quiet
How it works
52
Energy 1
NSB210FTB
N
G31M
Electrical / Electronics
W
E
Advantages of BLUE PLUS
Blue+ batteries are specifically designed for
applications where a full recharge is not always
available. The new PSOC (partial state of
charge) technology will provide the maximum
amount of power without a complete recharge
after each use. The latest Enhanced Chemistry
allows for faster charging at lower voltages
while providing backward compatibility with
existing models. The Enhanced Chemical
design also retards sulfation crystallisation with
a focus on long life and consistent performance
Energy 1 Batteries
▪▪Advanced AGM construction-no water levels to fill or corrosion to clean
▪▪Long life, over 800 cycles at 50% discharge, over 500 cycles at 80% discharge
▪▪35% more compact
▪▪Low internal resistance - provides for very high discharge and recharge rates
▪▪Proprietary plate construction delivers maximum cranking amps
▪▪Fast recharge capability
▪▪Remote venting for enclosed cabinet applications
▪▪Flexible design-can be installed in any orientation except inverted
▪▪Flame retardant (UL 94 VO) PC-ABS plastic case and cover
▪▪3 step terminal seal design to ensure leak-free operation
▪▪Approved as nonhazardous cargo for ground, sea and air transportation
▪▪Remote venting for enclosed cabinet applications
▪▪Integral handles ensure ease of handling
ENERGY 1 Batteries, based on
Northstar AGM Technology, is the
obvious choice for Yachts!
.............. No Maintanence
.............. Up to 40% in space savings
.............. Up to 25% in weight savings
.............. Remote Venting
Type
Amp Hour Rate
@20 (Ah)
CCA
@ 0°F
MCA
@ 32°F
Reserve Capacity
@ 25 amps
Dimensions
H x W x L(in)
Weight
(lbs)
ENE G31M*
Standard
102.7
1150
1370
220
9.25” x 6.77” x 12.91”
76.2
ENE NSB210FTB
Blue Plus
181
1250
1600
390
12.6” x 4.92” x 22.5”
132
Part #
*Request Item
Charge voltage compensation for NSB batteries
The low internal resistance of the NSB battery allows for very high charge acceptance. These batteries also do not require the charge
current to be artificially limited, as long as constant voltage (CV) charging is used. This characteristic helps the battery reach a very high
(>85%) state of charge (SOC) in less than one hour. Modern, three step battery chargers accomplish this during the absorption phase of
the charging process and downshift to a lower float voltage when the charging current decreases to 2 to 3 % of the battery’s capacity.
► Note
A rudimentary shop type charger does not generally have these features and is not recommended for charging any AGM batteries.
What is the optimum charge voltage?
In a perfect world the charge rate of AGM batteries would be the same in all conditions. However, ambient temperature and
battery temperature both play a major part in determining the optimum charge rate. It is best to use charging equipment that
has adjustable voltage set points or pre sets for different battery types. For systems using adjustable charge rates it is best to
pick the average ambient temp from the charging table below and find the closest setting.
Modern three step battery chargers usually have a temperature compensating probe that is generally placed on the negative
post of the battery that is expected to be the warmest battery.
Temp/°C
Minimum Float
Voltage /VPC
Nominal Float
Voltage /VPC
Maximum Float
Voltage /VPC
Minimum Cyclic
Voltage /VPC
Nominal Cyclic
Voltage /VPC
Maximum Cyclic
Voltage /VPC
0
2.35
2.37
2.39
2.52
2.55
2.58
5
2.33
2.35
2.37
2.50
2.53
2.56
10
2.31
2.33
2.35
2.49
2.51
2.54
15
2.29
2.31
2.33
2.47
2.49
2.51
20
2.27
2.29
2.31
2.45
2.47
2.49
25
2.25
2.27
2.29
2.43
2.45
2.47
30
2.23
2.25
2.27
2.41
2.43
2.45
35
2.21
2.23
2.25
2.39
2.41
2.43
40
2.19
2.21
2.23
2.37
2.39
2.41
42
2.18
2.20
2.22
2.36
2.38
2.41
45
2.17
2.19
2.21
2.35
2.37
2.39
50
2.17
2.17
2.19
2.33
2.35
2.37
53
FTZ
Adhesive Lined Tubing Specifications (3:1 ratio)
FTZ Eco-Max Battery Terminals
Shrinks to
Wire Range (AWG)
1/8” (3.2mm)
1/32" (0.8 mm)
<18 (< 0.8 mm2)
3/16” (4.8mm)
1/16" (1.6 mm)
20 - 12 (0.5-3 mm2)
1/4” (6.4mm)
5/64" (2 mm)
16 - 10 (1-5 mm2)
3/8” (9.5mm)
1/8" (3.2 mm)
12 - 8 (3-8 mm2)
1/2” (12.7mm)
5/32" (4 mm)
8 - 4 (8-19 mm2)
Size
Polarity
Tool Die
3/4” (19mm)
1/4" (6.4 mm)
8 - 2/0 (13-62 mm2)
FTZ 18128
4
Universal
Gray J-H
1” (25.4mm)
5/16" (7.9 mm)
2 - 4/0 (32-103 mm2)
FTZ 18143
1-2
Negative
Pink H-H
FTZ 18144
1-2
Positive
Pink H-H
FTZ Crimp ‘N Seal Quick Disconnects
FTZ 18163
1/0
Negative
Black E-A
FTZ 18164
1/0
Positive
Black E-A
FTZ 18173
2/0
Negative
Orange A-C
▪▪Fully insulated, waterproof, single hump
▪▪Polyolefin heat shrink tubing 3:1
▪▪50 per package
FTZ 18174
2/0
Positive
Orange A-C
FTZ 18183
3/0
Negative
Purple A-B
FTZ 18184
3/0
Positive
Purple A-B
FTZ 18193
4/0
Negative
Yellow A-A
FTZ 18194
4/0
Positive
Yellow A-A
Part #
FTZ Lead Plated Yellow Brass
Battery Terminals
FTZ 17128
FTZ 17129
Negative, 5/16”
Positive, 3/8”
FTZ Cast Lead Battery Terminals
▪▪Converts standard battery post terminals to
a marine stud connector
▪▪Allows for easy removal of connector from battery
FTZ 17138
FTZ 17139
FTZ 30188P50
FTZ 30196P50
FTZ 30198P50
FTZ 30388P50
FTZ 30398P50
FTZ 30488P25
FTZ 30498P25
22-18 Male, .250” tab
22-18 Female, .187” tab
22-18 Female, .250” tab
16-14 Male, .250” tab
16-14 Female, .250” tab
12-10 Male, .250” tab
12-10 Female, .250” tab
FTZ Crimp ‘N Seal Quick Disconnects
▪▪Waterproof
▪▪Polyolefin heat shrink tubing 3:1
▪▪50 per package
FTZ 31183P50
FTZ 31184P50
FTZ 31193P50
FTZ 31194P50
FTZ 31383P50
FTZ 31393P50
22-18, Male, .250” tab
22-18, Male, .187” tab
22-18, Female, .250” tab
22-18, Female, .187” tab
16-14, Male, .250” tab
16-14, Female, .187” tab
Negative, 5/16”
Positive, 3/8”
FTZ Dual Wall Heat Shrink Tubing w/Sealant
▪▪Flexible tubing for light duty applications
▪▪Provides environmental and flame retardant protection for
electrical and electronic connections
▪▪Polyolefin construction
FTZ Crimp ‘N Seal Brazed Rings
FTZ 29004-48
FTZ 29004R48
FTZ 29005-48
FTZ 29005R48
FTZ 29006-48
FTZ 29006R48
FTZ 29006Y48
FTZ 29008-48
FTZ 29008R48
FTZ 29008Y48
FTZ 29009-48
FTZ 29009R48
FTZ 29009Y48
FTZ 29010-48
FTZ 29010R48
FTZ 29010Y48
FTZ 29011-48
FTZ 29011R48
FTZ 31113P50
FTZ 31114P50
FTZ 31115P50
FTZ 31116P50
FTZ 31117P50
22-18 ring, #8 stud, 50/pkg
22-18 ring, #10 stud, 50/pkg
22-18 ring, 1/4" stud, 50/pkg
22-18 ring, 5/16" stud, 50/pkg
22-18 ring, 3/8" stud, 50/pkg
FTZ 31313P50
FTZ 31314P50
FTZ 31314P500
FTZ 31315P50
FTZ 31316P50
FTZ 31317P50
16-14 ring, #8 stud, 50/pkg
16-14 ring, #10 stud, 50/pkg
16-14 ring, #10 stud, 500/pkg
16-14 ring, 1/4” stud, 50/pkg
16-14 ring, 5/16” stud, 50/pkg
16-14 ring, 3/8” stud, 50/pkg
FTZ 31413P25
FTZ 31414P25
FTZ 31415P25
FTZ 31416P25
FTZ 31417P25
12-10 ring, #8 stud, 25/pkg
12-10 ring, #10 stud, 25/pkg
12-10 ring, 1/4”stud, 25/pkg
12-10 ring, 5/16” stud, 25/pkg
12-10 ring, 3/8” stud, 25/pkg
1/8" x 4' Black
1/8" x 4' Red
3/16" x 4' Black
3/16" x 4' Red
1/4" x 4' Black
1/4" x 4' Red
1/4” x 4’ Yellow
3/8" x 4' Black
3/8" x 4' Red
3/8” x 4’ Yellow
1/2" x 4' Black
1/2" x 4' Red
1/2” x 4’ Yellow
3/4" x 4' Black
3/4" x 4' Red
3/4” x 4’ Yellow
1" x 4' Black
1" x 4' Red
▪▪Fully insulated-waterproof
▪▪Polyolefin heat shrink tubing 3:1
Electrical / Electronics
▪▪Patent pending bimetal design
▪▪Exceeds SAE conductivity standards
▪▪Pure tubular copper barrel permits
easier crimping and provides a copper to
copper connection with the cable
▪▪10 per package
Size
Electrical / Electronics
54
FTZ
FTZ Bullets/Recepticals
FTZ Insulated Butt Splices
▪▪Waterproof
▪▪Polyolefin heat shrink tubing 3:1
▪▪50 per package
▪▪Standard solderless terminals
▪▪Nylon covers
FTZ 31169P50
FTZ 31368P50
FTZ 31369P50
22-18, Male .156”
16-14, Male .180”
16-14, Male .156”
FTZ 30179P50
FTZ 30378P50
FTZ 30379P50
22-18, Female .156”
16-14, Female .180”
16-14, Female .156”
FTZ 45133N-P100
FTZ 45333N-P100
FTZ 45433N-P50
22-18, 100/pkg
16-14, 100/pkg
12-10, 50/pkg
FTZ Bullets
▪▪Standard solderless terminals
▪▪Nylon covers
FTZ Butt Splices
FTZ 45168N-P100
FTZ 45368N-P100
22-18, .176”, 100/pkg
16-14, .176”, 100/pkg
▪▪Waterproof
▪▪Polyolefin heat shrink tubing 3:1
FTZ 45178N-P100
FTZ 45378N-P100
22-18, .180”, 100/pkg
16-14, .180”, 100/pkg
FTZ 31130P50
FTZ 31330P50
FTZ 31430P25
FTZ 31530
22-18, 50/pkg
16-14, 50/pkg
12-10 25/pkg
8, 10/pkg
FTZ Step Down Butt Splices
▪▪Waterproof
▪▪Polyolefin heat shrink tubing 3:1
FTZ 35330P50
FTZ 35430P25
FTZ 35530P25
22-18/16-14, 50/pkg
16-14/12-10, 25/pkg
12-10/8, 25/pkg
FTZ Fully Insulated Double Humps
▪▪Standard solderless terminals
▪▪Nylon covers
▪▪.250 tabs
FTZ 45187N-P100
FTZ 45197N-P100
22-18, Male, 100/pkg
22-18, Female, 100/pkg
FTZ 45387N-P100
FTZ 45397N-P100
16-14, Male, 100/pkg
16-14, Female, 100/pkg
FTZ 45487N-P50
FTZ 45497N-P50
12-10, Male, 50/pkg
12-10, Female, 50/pkg
FTZ Quick Disconnects
FTZ Nylon Rings
▪▪Standard solderless terminals
▪▪Nylon covers
▪▪Standard solderless terminals
▪▪Nylon covers
▪▪.250 tabs
FTZ 45113N-P100
FTZ 45114N-P100
22-18 ring, #8 stud, 100/pkg
22-18 ring, #10 stud, 100/pkg
FTZ 45183N-P100
FTZ 45193N-P100
22-18, Male, 100/pkg
22-18, Female, 100/pkg
FTZ 45313N-P100
FTZ 45314N-P100
FTZ 45315N-P100
FTZ 45316N-P100
16-14 ring, #8 stud, 100/pkg
16-14 ring, #10 stud, 100/pkg
16-14 ring, 1/4” stud, 100/pkg
16-14 ring, 5/16” stud, 100/pkg
FTZ 45383N-P100
FTZ 45393N-P100
16-14, Male, 100/pkg
16-14, Female, 100/pkg
12-10, Male, 50/pkg
12-10, Female, 50/pkg
FTZ 45413N-P50
FTZ 45414N-P50
FTZ 45415N-P50
FTZ 45416N-P50
FTZ 45417N-P50
FTZ 45483N-P50
FTZ 45493N-P50
12-10 ring, #8 stud, 50/pkg
12-10 ring, #10 stud, 50/pkg
12-10 ring, 1/4” stud, 50/pkg
12-10 ring, 5/16” stud, 50/pkg
12-10 ring, 3/8” stud, 50/pkg
FTZ 45514N-P50
FTZ 45517N-P50
8 ring, #10 stud, 50/pkg
8 ring, 3/8”stud, 50/pkg
FTZ Butt Splices
▪▪Standard solderless terminals
▪▪Nylon or vinyl covers
FTZ 45130N-P100
FTZ 45330N-P100
FTZ 45430N-P50
FTZ 45530-P50
22-18 Nylon, 100/pkg
16-14 Nylon, 100/pkg
12-10 Nylon, 50/pkg
8 Vinyl, 50/pkg
FTZ Wire Taps
FTZ 45908-P25
18-14, Dark Blue, 25/pkg
FTZ
FTZ Coolseal Butt Connectors
FTZ Spiral Wrap
A heat-less, solderless terminal, it utilizes revolutionary anaerobic
sealant technology that installs in a fraction of the time of
comparable heat seal connectors. Simply strip the wire and
crimp, activating the sealant, to create an environmentally sealed
connection. The sealant prevents the ingress of moisture and air,
the nylon insulation provides maximum abrasion and puncture
resistance.
▪▪Seals out moisture causing corrosion
▪▪Improved productivity
▪▪No heat tools required
▪▪Nylon insulation
▪▪99.9% Etp copper terminal
▪▪Natural nylon wrap
▪▪100’ lengths
22-18, 100/pkg
22-18, 50/pkg
22-18, 25/pkg
16-14, 100/pkg
16-14, 50/pkg
16-14, 25/pkg
12-10, 100/pkg
12-10, 25/pkg
FTZ Standard Nylon Cable Clamps
▪▪Sold in packs of 100
FTZ 60301
FTZ 60301BK
FTZ 60302
FTZ 60302BK
FTZ 60304
FTZ 60304BK
FTZ 60306
FTZ 60306BK
Natural, 3/16"
Black, 3/16"
Natural, 1/4"
Black, 1/4"
Natural, 3/8"
Black, 3/8"
Natural, 1/2"
Black, 1/2"
FTZ Heavy Duty Nylon Cable Clamps
▪▪Sold in packs of 100
FTZ 60402
FTZ 60402BK
FTZ 60404
FTZ 60404BK
FTZ 60406
FTZ 60406BK
FTZ 60408
FTZ 60408BK
FTZ 60410
FTZ 60410BK
Natural, 1/4"
Black, 1/4"
Natural, 3/8"
Black, 3/8"
Natural, 1/2"
Black, 1/2"
Natural, 3/4"
Black, 3/4"
Natural, 1"
Black, 1"
FTZ Polyethlene Split Loom
▪▪Thick wall offers superior crush-resistance
and a tight seam enclosure
▪▪Temperature rating: -15 degrees F to 195
degrees F (-26 C to 90 C)
▪▪Flexible cable routing and easy break-out
▪▪Rounded edges prevent cutting cable
FTZ 80004-25
FTZ 80006-25
3/8" x 25' Black
1/2” x 25’ Black
1/4” OD.
3/8” OD.
1/2” OD.
FTZ Starter Lugs
▪▪Seamless copper pad
▪▪Tin plated
▪▪10 per package
FTZ 91004
FTZ 91005
FTZ 91006
FTZ 91007
FTZ 91014
FTZ 91015
FTZ 91016
FTZ 91017
FTZ 91024
FTZ 91025
FTZ 91026
FTZ 91027
FTZ 91029
FTZ 91035
FTZ 91036
FTZ 91037
FTZ 91039
FTZ 91046
FTZ 91047
FTZ 91056
FTZ 91057
FTZ 91059
FTZ 91066
FTZ 91067
FTZ 91069
FTZ 91086
FTZ 91087
FTZ 91089
8 ga lug, #10 stud
8 ga lug, 1/4" stud
8 ga lug, 5/16" stud
8 ga lug, 3/8" stud
6 ga lug, #10 stud
6 ga lug, 1/4" stud
6 ga lug, 5/16" stud
6 ga lug, 3/8" stud
4 ga lug, #10 stud
4 ga lug, 1/4" stud
4 ga lug, 5/16" stud
4 ga lug, 3/8" stud
4 ga lug, 1/2" stud
2 ga lug, 1/4" stud
2 ga lug, 5/16" stud
2 ga lug, 3/8" stud
2 ga lug, 1/2" stud
1 ga lug, 5/16" stud
1 ga lug, 3/8" stud
1/0 lug, 5/16” stud
1/0 lug, 3/8" stud
1/0 lug, 1/2" stud
2/0 lug, 5/16" stud
2/0 lug, 3/8" stud
2/0 lug, 1/2" stud
4/0 lug, 5/16" stud
4/0 lug, 3/8" stud
4/0 lug, 1/2" stud
FTZ Adhesive Back Mounting Plates
▪▪100 per package
FTZ 93513
FTZ 93511
FTZ 93510
FTZ 93512
.75” x .75”, #6, UV Black
.75” x .75”, #6, Natural
1” x 1”, #8, Natural
1” x 1”, #8, UV Black
Electrical / Electronics
FTZ 33130P100
FTZ 33130P50
FTZ 33130P25
FTZ 33330P100
FTZ 33330P50
FTZ 33330P25
FTZ 33430P100
FTZ 33430P25
FTZ 81002-100
FTZ 81004-100
FTZ 81006-100
55
Electrical / Electronics
56
FTZ
FTZ Heavy Duty Starter Lugs
FTZ Wrap ‘N Seal Tape
▪▪Colour coded
▪▪Seamless copper pad
▪▪Tin plated
▪▪10 per package
▪▪Wrap ‘N Seal silicone tape self fuses and
cures in 24 hours to form a permanent
moisture tight seal
▪▪Has no adhesive lining leaving the
application clean with no sticky residue
▪▪Centre ridge acts as a guide when
wrapping for a uniform and straight application
▪▪Ideal for high temperature applications
▪▪1” x 20’
FTZ 91705
FTZ 91706
FTZ 91707
FTZ 91709
FTZ 91715
FTZ 91716
FTZ 91717
FTZ 91719
FTZ 91725
FTZ 91726
FTZ 91727
FTZ 91729
FTZ 91745
FTZ 91746
FTZ 91747
FTZ 91749
FTZ 91756
FTZ 91757
FTZ 91759
FTZ 91766
FTZ 91767
FTZ 91769
FTZ 91776
FTZ 91777
FTZ 91779
FTZ 91786
FTZ 91787
FTZ 91789
8 ga lug, 1/4” stud
8 ga lug, 5/16” stud
8 ga lug, 3/8” stud
8 ga lug, 1/2” stud
6 ga lug, 1/4” stud
6 ga lug, 5/16” stud
6 ga lug, 3/8” stud
6 ga lug, 1/2” stud
4 ga lug, 1/4” stud
4 ga lug, 5/16” stud
4 ga lug, 3/8” stud
4 ga lug, 1/2” stud
1-2 ga lug, 1/4” stud
1-2 ga lug, 5/16” stud
1-2 ga lug, 3/8” stud
1-2 ga lug, 1/2” stud
1/0 lug, 5/16” stud
1/0 lug, 3/8” stud
1/0 lug, 1/2” stud
2/0 lug, 5/16” stud
2/0 lug, 3/8” stud
2/0 lug, 1/2” stud
3/0 lug, 5/16” stud
3/0 lug, 3/8” stud
3/0 lug, 1/2” stud
4/0 lug, 5/16” stud
4/0 lug, 3/8” stud
4/0 lug, 1/2” stud
▪▪100 per package
Standard Ties
4" 5.7" 8" 11.8" 14.6" 14.5" 4" 5.7" 8" 11.8" 14.6" Natural
Natural Natural Natural Natural Natural UV Black UV Black UV Black UV Black UV Black 18lb
40lb
50lb
50lb
50lb
120lb
18lb
40lb
50lb
50lb
50lb
Mounting Nylon Head Ties
FTZ 93310
FTZ 93320
FTZ 93340
FTZ 93350
FTZ 93410
FTZ 93420
FTZ 93440
FTZ 93450
4.5" 5.9" 8" 12.6" 4.5" 5.9" 8" 12.6" Natural Natural Natural Natural UV Black UV Black UV Black UV Black FTZ Electrical Tape
▪▪1700 Temflex vinyl tape
▪▪3/4” x 60’
FTZ 99204Black
FTZ Shrink Jet Heat Tool
Provides up to a 1300°F flameless heat source
that is safe to use in environments where vapours
may be present or flames are prohibited.
▪▪Automatic piezo ignition system
▪▪Water & wind resistant
▪▪Refillable fuel cell
▪▪L: 1” x W: 3.2” x H: 4.5”
▪▪Operating time (one tank) approx. 20 min.
FTZ 94700
FTZ Turbo Lite II Heat Tool
FTZ Nylon Cable Ties
FTZ 93110
FTZ 93120
FTZ 93130
FTZ 93150
FTZ 93160
FTZ 93170
FTZ 93210
FTZ 93220
FTZ 93230
FTZ 93250
FTZ 93260
FTZ 99200White
FTZ 99201Red
FTZ 99202Black
FTZ 99207Yellow
18lb
40lb
50lb
50lb
18lb
40lb
50lb
50lb
This small but versatile heat tool provides a
2400°F pinpoint blue flame that can easily
handle applications such as heat shrink terminals
and heat shrink tubing.
▪▪Piezo waterproof /windproof ignition
▪▪Convenient twist flame adjustment
▪▪Refillable translucent fuel tank
▪▪L: 1.4” x W: 0.8” x H: 2.8”
▪▪Operating time (one fill) approx. 25 min.
FTZ 94900
FTZ
FTZ Multi Purpose Crimp Tool
FTZ Compact Cable Cutter
Multiple Crimp Dies
▪▪7.5” Overall length
▪▪Heat treated blades maintain sharpness longer
▪▪Narrow head design for working in tight spaces
▪▪Cuts up to 2/0 copper or aluminum cable
▪▪26-10 AWG insulated terminals
▪▪22-10 AWG non-insulated terminals
▪▪7-8mm ignition terminals
▪▪‘F’ type auto terminals
57
FTZ 94012
Precision Ground Wire Cutters
Precision Ground Wire Stripper
▪▪26-10 AWG stranded wire
▪▪18-8 AWG solid wire
Bolt Cutters
▪▪Cuts five common sizes 4-40, 6-32, 8-32, 10-24, 10-32.
▪▪Threaded slots firmly grips bolts and can be used to re-thread bolts
▪▪Dual wire looping slots
▪▪Made of heat treated steel
▪▪Cushion grip handles
▪▪Weight: 7 oz
FTZ 94145
FTZ Controlled Cycle Crimp Tool
FTZ’s controlled cycle ratchet crimp tool is specifically
designed and manufactured for Crimp ‘N Seal heat
shrink terminals and splices. The 94130 is UL listed
and CSA Certified with CNS terminals and splices to
provide the correct crimp every time.
▪▪Heat shrink terminals 22-10 awg
▪▪Precision dies colour-coded to industry standards
▪▪Ratchet mechanism ensures a proper crimp each time
by not releasing until cycle is complete
▪▪Compound action delivers maximum crimp force
▪▪Cushion grip handles
FTZ 94130
FTZ ‘CORRECT’ Crimp HD Crimp Tool
The professional heavy duty crimp tool is engineered to
provide the most complete crimp on all major brands of
connectors.
▪▪6 Ga – 250 MCM range
▪▪Diamond-shaped crimp completely compresses cable to
form solid mass assuring low resistance connection
▪▪Compound action exerts five tons of force
▪▪Built-in dies: no detached dies to purchase or lose
▪▪Rotating dies quickly adjust setting to accommodate
various terminals and lugs
▪▪Length 25”
▪▪Weight 5.9 lbs
FTZ 94284
FTZ Cable Cutter
▪▪16” handles provides leverage and control
▪▪Heat treated blades maintain sharpness
▪▪Cuts up to 350mcm copper or aluminum cable
FTZ 94014
FTZ Rotary Cable Stripper
▪▪8 Awg-4/0 wire range
▪▪Adjustable blade height adjust depth to match
insulation thickness of cable
▪▪Replacement blades included extends life of tool
FTZ 94040
Electrical / Electronics
▪▪Up front anvil type: ideal for work in confined
spaces
▪▪Scissor type: conveniently located next
to wire stripper for fast installation
14.1" Multi-Function WXGA
Multi-Touch Display
9" Multi-Function WVGA
Multi-Touch Display
Wireless NavNet Data Viewer
Wireless NavNet Remote Control
Using FREE SmartPhone App
Using FREE Tablet App
www.FurunoUSA.com
View The Guided Video Tour
Want to know more
about the new
NavNet TZtouch?
Visit NavNet.com
or scan this code
with your SmartPhone.
Furuno
Furuno NavNet3D Multi-Function Displays
G e t C o n n e c t e d Wi t h O u r
Wi r e l e s s I n t e r f a c e
Engineered to utilize the latest technology, NavNet TZtouch opens the door
to cutting edge wireless LAN features, such as tablet and smartphone apps,
real time weather data, software updates and more. Download these FREE
apps to view and control NavNet TZtouch.
NavNet Remote App
Take full control of your NavNet
in a whole new way. The
TZtouch Remote app allows you
to operate your system remotely
with a tablet over wireless LAN,
when connected to the network.
Marine Weather Forecast
The weather tool is completely
free and easy to use, giving you
unlimited access to weather
forecasts worldwide 24 hours
a day provided by NavCenter.
Select geographic coverage,
data type, period of time, and
then choose how to receive the
­le. NavNet TZtouch provides
up to 16 days of weather
forecasting.
Furuno TZTouch Displays
Today's NavNet has come a long way from the first multi function
display. Take one look and you will see just how far. A generous
9" or 14.1" display with edge-to-edge glass makes for a clean and
stylish installation. The LED backlighting pushes light through
every pixel on the screen for remarkable brightness. Anti-reflective
glass coating is visible under any lighting condition. Configure the
displays with a wide variety of sensors to build a navigation suite
that meets your individual requirements.
Bonded LCD-Clear Readability
Our bonded LCDs offer a fog-free structural design that has been
applied to both the TZT9 and TZT14. This ensures that the display
will never be affected by water condensation, caused by an air gap
between the LCD and the front cover plate.
Polarized Friendly-Clearly Remarkable
NavNet TZtouch has an LCD screen that does not “black out”
when wearing polarized sunglasses, providing clear visibility from
virtually any angle
▪▪Multi Touch Control (pinch to zoom)
▪▪Wireless Hotspot Connectivity
▪▪Tablet & Smartphone Apps
▪▪TimeZero
FUR TZT9*
FUR TZT14*
9”, WVGA 800 x 480
14”, WXGA 1280 x 800
FUR TZTBB*
Black Box
Accessories:
*Request Items
Network Sensor connection from Radar
Easiest user interface on the market
Fully digitized environment with add-on components
Chart scaling without limitation
▪▪Pre-loaded with NOAA raster chart library for entire U.S.
coastline including Alaska and Hawaii
▪▪TimeZero technology facilitates instant chart redraw, allowing
zooming in and out, chart panning, changing chart display
modes and other chart handling functions seamlessly and with
no lag time
▪▪Full Time 3D chart rendering. Choose a 2D top-down view of
the navigation chart for a traditional chart plotting presentation,
or choose to pan and zoom the chart to any angle at any range
scale you choose
▪▪Pan the chart using the scroll pad, and then instantly return to
own ship at the touch of a single dedicated key
▪▪Zoom seamlessly and continuously to whatever chart scale you
desire - TimeZero architecture allows you to seamlessly zoom in
or out to the exact magnification level you like without steps or
limitations
▪▪No “3D mode” to change into and no waiting - NavNet 3D
operates in a 3D environment full-time
▪▪Fuse satellite photography with raster or vector chart
information. Land areas (zero depth) are completely opaque, so
that these areas are displayed as high-resolution satellite photos
on the chart. As the depth increases, the satellite photography
becomes more transparent so that you will know where the
shallows end and the deeper water starts, while allowing the
raster or vector chart to be visible
▪▪More than 12,000 ship’s track points and over 2,000 waypoints
▪▪200 planned routes, with up to 100 waypoints/route
▪▪Preloaded tides & currents
▪▪Built-in ARPA processor can simultaneously acquire and track
up to 30 targets (with appropriate sensor)
▪▪AIS tracking when connected to AIS receiver
▪▪True colour depth shading utilizing bathymetric data
▪▪Standard video input and outputs
▪▪8.4” VGA (640 x 480) colour display
FUR MFD 8
▪▪12.1” SVGA (800 x 600) colour display
FUR MFD 12
Furuno NavNet3D Black Box
Extended Mode feature of Navnet 3D Black
Box allows you to connect two monitors and
synch the video, or ‘split’ the two screens
into eight different quarters to display the
information you want to see most.
▪▪Includes 1 controller
FUR MFD BB*
* Request Item
► Also See
Radomes pg 62
Electrical / Electronics
R emo t e l y V i ew A n d C o n t r o l T Z t o u c h
Wi t h A p p s D e s i g n e d F o r Y o u r Sma r t
phoneAndTablet
NavNet Viewer App
Conveniently view information shared wirelessly
by the NavNet TZtouch network on your Apple and
Android mobile products. As one of the features,
you can click through instrument pages to view key
navigational information, such as Depth, Temp,
Wind, COG, Fish Finder display and much more.
59
Electrical / Electronics
60
Furuno
Furuno C-Map
Fish Finder/Chartplotters
Furuno
Colour LCD Fish Finders
Display Size: Power Use: Display Size: Frequency: Range: Power Use: 6”/7”
12 VDC or 24 VDC
▪▪The LCD and AR glass are bonded together to ensure no
fogging issues
▪▪Clear visibility even when wearing polarized sunglasses
▪▪Internal GPS antenna for simple and easy installation
▪▪Standard C-Map 4D chart available on SD card
▪▪RotoKeyTM revolving menu and familiar point-and-click
operation
▪▪Internal memory: Waypoint/Track 30,000 points, Route 1,000
routes
▪▪Equipped with FURUNO’s latest digital fish finder technology
- Bottom Discrimination Function (Compatable transducer
required, sold separatley)
- ACCU-FISHTM - A unique fish size analyze
▪▪Post-processing Gain Control applied to all echoes displayed on
the screen
▪▪White Line function - Discriminates fish lying near the bottom
▪▪AIS data input compatable (up to 3 tanks)
*These units are NMEA2000 compatable only
FUR GP1670F
FUR GP1870F
6”, 800 cd/m2 LCD, 640 x 480 pixels (VGA)
7”, 900 cd/m2 LCD, 800 x 480 pixels (WVGA)
Accessories:
FUR GPA-017
External GPS antenna w/ 10m cable
Furuno
Fish Finders
Display Size: Display Type: Range: Frequency: Power Output: Power Use: 5” / 6"
Mono LCD
1500’
50 & 200 kHz
300 W
12 VDC
▪▪Waterproof, Silver Bright display
▪▪Targets presented in up to 4 gray tones
▪▪Picture resolution of 240(H) x 320(V) pixels
▪▪Seven depth scales, from 0-10 to 0-640 feet
▪▪Automatic or manual depth range and gain adjustment
▪▪A-Scope for rapid fish detection and species identification
▪▪White Line mode for enhanced bottom fish detection
▪▪Audible and visual, temp, speed, fish or bottom alarm
▪▪TLL output sends position, temp and depth to Furuno TLL
capable plotters
▪▪Speed and Temperature input via optional sensor or NMEA data
▪▪Mini Navigator allows storage of up to 12 waypoints, with
capability to navigate back to these points using the LS4100’s
XTE/Range and bearing calculation and steering screens
▪▪Two NMEA0183 ports - one bidirectional and one “listen-only”
▪▪Transducer sold separately
FUR LS4100*5"
FUR LS6100*6"
*Request Items
5.7”/8.4”
50 & 200 kHz
2-1200m
12 VDC or 24 VDC
▪▪Equipped with Furuno’s latest technology: the Bottom
Discrimination Function - Analyze bottom structure**
- Provides an at-a-glance recognition of bottom form with four types of graphical displays (Rocks/Gravel/Sand/
Mud) when connected to required thru-hull or transom mount transducer*
- **Compatable transducer required
▪▪ACCU-FISH - A unique fish size analyzer based on the latest
digital technology
▪▪White Line feature - Discriminate fish lying near the bottom
- The top edge of the sea floor is displayed in white to clearly show structures
- This feature helps to discriminate weeds and bottom fish distinctly
▪▪Configurable Alarm function (depth, fish echoes, etc.)
▪▪Post-processing Gain Control applied to all echoes displayed
on the screen
▪▪Share and display information on a chart plotter*
- Furuno’s TLL (Target Lat/Lon) output allows you to interface the FCV-627 with your chart plotter so that you can mark fishing spots with various information (L/L, Depth, Water Temp, Fish size, Bottom).
- * Required connection to chart plotter
▪▪Fast transmission rate of 3,000 PRR (Pulse Repetition Rate)
per minute (at 5m depth range)
▪▪Bright 800 cd/m2 LCD gives excellent readability, even in
bright sunlight
- The LCD and the AR glass are bonded together to ensure no fogging issues
- Clear visibility even when wearing polarized sunglasses
▪▪Transducer sold separately
Swivel mounting bracket to adjust
the angle of the display
FUR FCV-627*
FUR FCV-587*
*Request Items
► Also See
5.7” LCD, 640 x 480 pixels (VGA)
8.4” LCD, 640 x 480 pixels (VGA)
Transducers
pg 65
Furuno
Furuno
7” LCD Radar (Stand Alone)
Display Size: Display Type: Antenna Size: Antenna Type: Range: Power Output: Display Size: Display Type: Antenna Size: Antenna Type: Range: Power Output: 6”
Mono LCD
15”
Radome
16 n.m.
2.2 kW
▪▪2.2kW 16NM, 15” radome included
▪▪Waterproof, Silver Bright LCD
▪▪Display resolution of 240(H) X 320(V) Dots
▪▪Targets displayed in up to 4 levels of gray tones
▪▪New Tri-speed 15” radome antenna, increases RPM at short
ranges for better target accuracy
▪▪3 Transmitter pulse lengths and repetition rates
▪▪Linear receiver with 10 dB noise figure
▪▪Automatic receiver tuning
▪▪Automatic or manual sea-clutter (STC) adjustment
▪▪Automatic or manual receiver gain adjustment
▪▪Sector blanking
▪▪Rain clutter (FTC) control
▪▪Echo stretch and interference rejection modes
▪▪Watchman mode to control the radar system for vessel safety
▪▪Reverse video display (white targets and marks on a black
background)
▪▪Full screen navigation data display in the standby mode
▪▪Omni pad control for rapid cursor and menu operation
▪▪Electronic bearing line and variable range marker
▪▪Target or echo trails with selectable time intervals
▪▪Waypoint lollipop on-screen to aid in vessel navigation
▪▪Adjustable duplex (in or out) radar guard zone alarm
▪▪TLL (Target Lat/Lon) output for use with plotter
▪▪Ability to connect BBWGPS GPS/WAAS receiver
▪▪Wind indication with appropriate sensor input
▪▪10 Meter signal cable assembly
FUR 1623
7”
Mono LCD
18”
Radome
24 n.m.
2.2 kW
▪▪2.2kW 24NM, 18.1” radome included
▪▪High contrast Silver Bright LCD
▪▪Low power consumption in watchman mode - only 8 W
▪▪Dual bandwidth IF amplifier: broad band for high fidelity in
short ranges, narrow band for enhanced detection in long ranges
▪▪Variable antenna speeds with range scales for optimum
performance on all ranges
▪▪Cursor position can be read in L/L (GPS Navigator is required)
▪▪Waypoint Lollipop on-screen to aid in vessel navigation (GPS
navigator is required)
▪▪Programmable navigation data repeater feature
▪▪Zoom in to a specific area
▪▪Reverse video feature for effective use at night
▪▪Guard Zone alarm (US Patent No.5032842)
▪▪10 meter signal cable assembly
FUR 1715
Electrical / Electronics
Furuno
6” LCD Radar (Stand Alone)
61
62
Furuno
Radar that you can access directly from your iOS devices. You can bring the Radar display
whenever you go, even put it on the iPhone in your pocket. Since the display is untethered, you
are free to roam the vessel while maintaining full situational awareness of your surroundings.
Plug in the Radar, set up the free app from App Store and you’re good to go. With familiar
gestures it’s a breeze to use; you can even use two iOS devices simultaneously.
▪▪4kW Radar antenna, powerful yet compact in size
▪▪Extremely economical power consumption (24W)
▪▪Wireless LAN, first Radar in the world accessible from your iOS devices
▪▪Exceptionally simple setup and intuitive operation with user-friendly & free iOS app
▪▪Fast and easy installation process w/only a single power cable
▪▪Simple touch interface with familiar gestures
▪▪Vivid, multi-color Radar target presentation
▪▪User selectable range scale from 0.125 to 24 nm
▪▪Two iOS devices – simultaneous operation
FUR DRS4W
W
E
Electrical / Electronics
N
Furuno 1st Watch Wireless Radar
ANTENNA
▪▪Peak Output Power: 4 kW
▪▪Type: ø488 mm Radome (19 inch)
RF TRANSCEIVER
▪▪Frequency: 9410 ± 30 MHz
▪▪Range Scales: 0.125 to 24 nm
▪▪Antenna Rotation Speed: 24 rpm
▪▪Wind Load: Relative wind 70 kn
Furuno
Radomes For NavNet 3D & TZT
Furuno
Open Array Antennas For NavNet 3D & TZT
▪▪Ultra High Definition (UHD) digital
radar offers crystal clear, noise-free
target presentation with automatic
real-time digital signal processing
▪▪Real-time digital auto gain/sea/rain
controls to deliver noise-free radar presentation
▪▪Radar antenna rotation speed (24/36/48 rpm) is automatically
shifted to the appropriate pulse length
▪▪Simultaneous scanning technology, providing unsurpassed
target detection. With each sweep of antenna, dual progressive
scan transmissions are sent, received and processed to
display two separate radar ranges on your NavNet 3D display
simultaneously. Each radar presentation acts autonomously,
allowing for manipulation of individual gain and clutter controls
▪▪Radome incorporates a NMEA 2000 port to which certain
NMEA 2000 sensors can be directly connected. Power for
these networked sensors is supplied directly from the radome
itself, allowing for flexible installation of multiple NMEA 2000
sensors without the need to run cables all the way to the main
processor unit
▪▪15 meter radar sensor cable assembly for NavNet 3D
▪▪*Requires power unit for operation w/TZT units only
▪▪Enhanced detection both in long and
short range by digital radar sensor
▪▪Enhanced auto tuning, auto gain and
anti-clutter controls
▪▪48 rpm antenna rotation speed for
HSC and river applications
▪▪Adaptive antenna rotation speed
according to pulse length
▪▪Accurate radar overlay on both 2D/3D chart presentation
with aid from heading sensors
▪▪True echo trail shows afterglow of moving radar targets
▪▪True colour radar shows density of targets in 16 colour levels
▪▪Radar guard zone and watchman features alert you to
potential danger
▪▪Dual VRM (variable range marker) and dual EBL (electric
bearing line)
▪▪Automatic IP address assignment for true plug and play
installation
▪▪15 meter radar sensor cable assembly for NavNet 3D
▪▪*Requires power unit for operation w/TZT units only
FUR DRS2D*
FUR DRS4D*
Accessories:
FUR PSU017*
* Request Items
2.2kW 24NM, 18” dome
4kW 36NM, 24” dome
Power supply unit
FUR DRS4A*
FUR DRS6A*
4kW 48NM, 3.5’ open array
FUR PSU012*
Power supply unit
Accessories:
* Request Items
6kW 64NM, 4’ open array
Furuno Radar Accessories
FUR 000-144-564* 15m cable assembly
FUR 000-144-565* 20m cable assembly
* Request Item
Furuno
Furuno
GPS Receiver
Display Size: Display Type: Power Use: Receiver Type: 63
Furuno
GPS/WAAS Receiver
4.5”
Mono LCD
12 VDC or 24 VDC
WAAS or GPS
FUR GP32*
*Request Item
FUR BBWGPS
10m cable
Furuno
GPS/WAAS Sensor NMEA2000
The GP-330B is a high performance GPS
Receiver designed for any type of vessel. This
compact and cost-effective receiver offers
extremely accurate position fixes, within 3
meters with the WAAS mode activated.
The GP330B is capable of data output in NMEA2000 format,
making it an ideal GPS sensor for use with NavNet 3D systems.
The sensor comes with all of the hardware required for deck- or
mast-mounting solutions. A 6-meter cable with NMEA2000
connector is supplied as standard
FUR GP330B*
*Request Item
Furuno
GPS/WAAS Navigator
▪▪4.3” “Sunlight Viewable” color LCD
(Brightness: 700 cd)
▪▪Enhanced data legibility thanks to large
characters and high resolution visual aid
▪▪Stores up to 10,000 marks/waypoints, 100 routes and 3,000 track
points
▪▪7 display modes available, including 2 user-customized modes
▪▪Supports both NMEA0183 and NMEA 2000 compatible CAN
bus interface
▪▪Contact closure capability available on the 10P connector
▪▪SBAS capable for better measurement
FUR GP33*
*Request Item
Screenshots of Various Display
Furuno
Remote Digital Display
▪▪4.3” “Sunlight Viewable” color LCD
(Brightness: 700 cd)
▪▪Enhanced data legibility thanks to large
characters and high resolution display
▪▪Customizable display format from full-screen to a 6-way split
screen presentation
▪▪Supports CAN bus, NMEA2000 and NMEA0183 interfaces
▪▪Two independent CAN bus input and output ports incorporated
for daisy chain networking
▪▪Internal NMEA0183/CAN bus conversion capability available
▪▪Simultaneous alarm monitoring capabilities for Water Temp,
Depth, Speed, Arrival, Anchor, XTE, Trip, Odometer, Timer
and Countdown Timer, Roll & Pitch, Wind Speed, Wind
Direction, and Battery
FUR RD33*
*Request Item
Screenshots of Available Presentaion Styles
Electrical / Electronics
▪▪12 channel, parallel tracking GPS receiver with WAAS technology, DGPS ready
▪▪Up to 900 knot tracking velocity
▪▪20 second warm start acquisition
▪▪1-3M Accuracy (95% of the time with WAAS on and SA off)
▪▪High contrast silver bright LCD screen
▪▪Waypoint and route data transfer via PC to another GP32
▪▪5 display modes available
▪▪Man overboard key
▪▪Waypoint entry by Loran-C TD’s (highway mode)
▪▪Alarms for arrival, XTE, anchor watch and high/low speed
points
▪▪Memory Capacity: 1000 points of vessel track, 999 points for
waypoints and marks, and 50 routes comprised of up to 30
waypoints
▪▪Waypoint comments of up to 16 characters
▪▪Event marks entered using one of nine symbols
▪▪2 Data ports for both RS422 and RS232
▪▪Feed nav data to radar, chart plotter, autopilot or sounder
through NMEA0183 port
▪▪Upload/download waypoints and routes directly from NavNet
display
GPS/WAAS receiver antenna makes any
NavNet product capable of receiving WAAS
and GPS information.
▪▪WAAS (Wide Area Augmentation System)
receiver
▪▪12 channel, all-in-view parallel tracking
GPS receiver
▪▪Up to 900 knot tracking velocity
▪▪90 Second cold start acquisition, 20 second warm
state acquisition
▪▪3m accuracy or higher (95% of the time, SA off)
▪▪WAAS on/off selectable
64
Furuno
Electrical / Electronics
Furuno
NavNet 3D & TZT Network Hub
NavNet 3D is built on an Ethernet
network, allowing you to add as few
or as many components as you desire
along with up to ten displays to create
your perfect navigational suite. The HUB101 is the centre of
your navigational network, connecting all of your displays and
components together. Power on/off synchronization amongst all
of the NavNet 3D display units can be achieved with the use of
the dedicated Ethernet HUB101.
FUR HUB101
Furuno NavNet 3D & TZT Network
Sounder
▪▪Enhanced detection of fish targets by
Furuno digital Filter (FDF) fish finder
technology
▪▪Selectable display modes include high or low frequency,
dual frequency, zoom, nav data, a-scope, marker zoom,
bottom zoom or bottom-lock
▪▪Audio and visual alarms alert you whenever preset limits
are met for water depth, water temperature and fish echoes
▪▪2 selectable automatic gain control modes: cruising and
fishing modes to match your boating purposes
▪▪IP address is automatically assigned to deliver plug and
play installation
▪▪Requires transducer
FUR DFF1
600w/1kW Dual
Furuno
Heading Sensor
▪▪Required for radar overlay on any Navnet
system
▪▪Automatic correction for local magnetic
variation with an appropriate GPS navigator or manual
correction with an optional remote display RD-30
▪▪High stability by a solid-state rate gyroscope
▪▪Two IEC/NMEA ports, one AD-10 port
▪▪High speed heading data output in IEC 61162-2 format
FUR PG500R*
* Request Item
Furuno
Satellite Marine Weather
▪▪Weather information is delivered via digital
receiver through Sirius’ marine weather
services
▪▪You have the ability to receive weather information and
forecasting that you can overlay onto your C-Map MAX charts
NOAA raster and vector charts (NavNet 3D)
▪▪Current weather reports, NOWrad nationwide high resolution
weather radar imagery and high-resolution Sea surface
temperature images
7", 10.4" and Black Box units, as well as all NavNet 3D models.
Requires Sirius weather service subscription & antenna, sold
separately.
FUR BBWX1*
* Request Item
Furuno
Heading Sensor NMEA 2000
▪▪Angular velocity sensor and magnetic
bearing sensor incorporated
▪▪Automatic determination of installation site
suitability
▪▪L-shaped mounting base for mounting on bulkhead
▪▪Output of magnetic bearing data to FURUNO CAN bus device
▪▪Includes 6' NMEA2000 cable
FUR PG700*
*Request Item
Furuno
NMEA2000 Backbone Box
The FI5002 is an NMEA2000 Junction Box
for use with NavNet 3D, TZT and the FI50 series of intrument
displays, as well as the FI5001 Wind Sensor. The FI5002 features
2 NMEA2000 backbone ports, as well as 6 NMEA2000 ports. Its
power requirements are less than 2A on a 12VDC system.
FUR FI-5002*
* Request Item
Furuno
Black Box AIS Receiver
▪▪Enhances safe navigation by receiving
critical navigation information from local
AIS-equipped vessels
▪▪Vastly improves situational awareness in any weather conditions
including dense fog, darkness, and congested waterways
▪▪Dual parallel channel, "full duplex" receiver design receives
AIS contact messages up to 100% more often than dual channel
"multiplexing" receivers
▪▪High sensitivity, synthesized receiver automatically switches
between international and local AIS channels
▪▪Optional amplified VHF splitter allows the use of a single
antenna for VHF radio and AIS receiver
▪▪Network output to NavNet 3D and PCs for added redundancy
and installation flexibility
▪▪Serial output for integration with various radar and chart plotter
systems
▪▪AIS viewer software included for on-board PC or land based
installations
▪▪Bulkhead mounting and low power, flexible DC input voltage
design for simplified installations
FUR FA30*
* Request Item
Furuno Parts & Accessories
FUR IFNMEA2K2*
FUR PSU012*
FUR 000-010-511*
FUR 000-144-565*
FUR 000-154-054
FUR 000-154-028
FUR 000-156-405*
FUR 000-167-962*
* Request Items
IF converter, NMEA200 - NMEA0183
Power supply unit DRS4A/6A w/MFD8
30m cable for FI 5001 sensor
20m signal cable assembly
5m NMEA 6 pin cable
5m NMEA 7 pin cable
Power cable assembly (NMEA0183)
1m NMEA2000 cable assembly 2 ended
Furuno
Furuno
NMEA2000 Smart Sensors
FUR DST-800PSF*Depth/speed/temp
FUR DT-800PSF* Depth/temp sensor
* Request Items
Furuno Transducers
Bronze Thru-Hull Multi-Sensor
▪▪200W; 235 kHz
▪▪Depth, speed and temperature
▪▪10 meter cable with 7-pin connector
▪▪Can be flush mounted with up to a 22 degree
dead rise
FUR 235DST-MSE*
Bronze Thru-Hull Multi-Sensor
▪▪600W; 50/200 kHz
▪▪40/10 degree beam angles
▪▪Depth, speed and temperature
▪▪30' cable with 10-pin connector
▪▪High-speed fairing block included
▪▪Bottom discrimination functionality
FUR 525STID-MSD*
Plastic Thru-Hull Multi-Sensor
▪▪200W; 235 kHz
▪▪Depth, speed and temperature
▪▪10 meter cable with 7-pin connector
FUR 235DST-PSE
Plastic Transom Mount Multi-Sensor
▪▪600W; 50/200 kHz
▪▪45/11 degree beam angles
▪▪Temperature and removable speed assembly
▪▪30' cable with 10-pin connector
▪▪Bottom discrimination functionality
FUR 525STID-PWD*
* Request Item
Furuno Transducers
Bronze Thru-Hull
▪▪600W; 50/200 kHz
▪▪46/10 degree beam angles
▪▪8 meter cable with 10-pin connector
▪▪Bottom discrimination functionality
FUR 520-5MSD
Plastic Shoot-Through-Hull
▪▪600W; 50/200 kHz
▪▪45/15 degree beam angles
▪▪30' cable with 10-pin connector
FUR 520-IHD*
* Request Item
Plastic Thru-Hull Low Profile
▪▪600W; 50/200 kHz
▪▪45/15 degree beam angles
▪▪30' cable with 10-pin connector
▪▪Bottom discrimination functionality
FUR 520-PLD
Plastic Thru-Hull
▪▪600W; 50/200 kHz
▪▪46/10 degree beam angles
▪▪8 meter cable with 10-pin connector
▪▪Bottom discrimination functionality
FUR 520-5PSD
Plastic Transom Mount
▪▪600W; 50/200 kHz
▪▪46/10 degree beam angles
▪▪8 meter cable with 10-pin connector
▪▪Bottom discrimination functionality
FUR 525-5PWD
Furuno Transducer Accessories
▪▪Transducer extension cable, 10-Pin(M) to 10-Pin(F), 4m
FUR AIR-033-203*
▪▪Transducer Y cable’ 10-Pin (F) to 10-Pin (M) and 6-Pin (M) 2m
FUR AIR-033-270*
▪▪Transducer pigtail, 10-Pin(F), 2m
FUR AIR-033-333*
* Request Items
Electrical / Electronics
The DST-800PSF is a NMEA2000 device. The wide
fore-aft, fan shaped beam is able to find bottom even
when installed on high dead rise hulls or on sailboats.
▪▪235 kHz
▪▪Depth, speed and temperature (+/ - 1 degree )
▪▪2-Meter cable with 5-Pin NMEA2K Connector
▪▪Airmar's patent pending speed signal processing for stable and
high accuracy speed readings from 160 MPH near-flush housing
minimizes drag with only 5 mm (3/16") extending outside of the
hull
▪▪Depth, speed, and temperature insert is easily removed for quick
service or storage
▪▪Self-jacking cap makes it easier to remove insert
65
66
Furuno
Electrical / Electronics
Furuno NavPilot
A revolutionary autopilot with a sunlight
viewable display designed for a variety
of vessels. It utilizes a self-learning and
adaptive software algorithm, and
plays the ultimate role
in course-keeping
capability. NavPilot
dynamically adjusts
essential parameters
during navigation, such
as vessel speed, trim, draught, tide and wind effects, dead band,
weather and more. These parameters are stored in system memory
and continuously optimized to make the NavPilot more versatile.
Self-Learning and Adaptive Software
From the first dock-side setup through the last voyage you made,
NavPilot continues to learn your vessel's steering characteristics,
allowing for real-time, dynamic adjustments to make the boat's
steering more accurate.
FishHunter Mode
FishHunter mode is a unique feature of FURUNO’s NavPilot
series. Find a fish target with your FURUNO sonar/sounder or bird
target with your FURUNO radar and feed it to the NavPilot The
NavPilot will activate the FishHunter mode to perform square,
zigzag, circle, orbit, spiral or figure-eight maneuvers around the
specified target at a user selected distance. This feature can also be
used for Man Overboard (MOB).
FUR NAVPILOT700*
4.6" Display (160 x 160 dot)
The new NavPilot 711C features a color day/night graphic
display, offering much better sunlight viewability during the day
while not affecting your night vision when the sun goes down.
FUR NAVPILOT711C*
3.6" Colour display (320 x 240 dot)
Accessories:
FUR PUMPHRP11-12*
FUR PUMPHRP17-12*
* Request Items
Hydraulic pump 1.1 CI/SEC 12V
Hydraulic pump 1.7 CI/SEC 24V
Furuno 2nd Station Handheld
The FAP5021 is a handheld control unit for the NavPilot series of
autopilots. It features a 3.6" Silver Bright LCD with a variety of
user-customizeable display. The FAP5021 allows for full control of
your NavPilot system including one-touch STBY, AUTO, NAV and
DODGE selection.
FUR FAP5021*
* Request Item
160 x 80 dot
Furuno
FI-150 Series Instruments
▪▪Bright backlit displays with wide viewing angles
▪▪Auto-backlighting feature minimizes power consumption
▪▪NMEA2000 interface offers "plug and play" networking
▪▪Easy installation with hole-saw flush-mount design
▪▪Ideal for mast or bulkhead mounting configurations
▪▪White face "F1 Style" gauges provide maximum contrast and
visibility
▪▪New use organic light emitting diode (OLED) backlighting
technology reduces power consumption
Wind Angle Display
FI-501 Apparent and true wind angle is displayed
in both analog and digital format when connected
to the FI-5001 or other NMEA2000 wind
measurement system.
FUR FI-501*
Wind Bearing Display
FI-502 Provides detailed and precise wind bearing
measurements from 60 port to 60 starboard, an
important range for close hauled (CH) points of sail.
FUR FI-502*
Digital Depth/Speed Display
FI-503 Displays critical digital data for navigation,
such as depth, speed, temp, and atmospheric
weather data in a 3-way split screen.
FUR FI-503*
Multi Function Display
FI-504 Features a large digital display. The
combination of alpha and numeric characters
present all of the data and functionality available
in the FI-50 Network. Alternating data displays are
possible and selected information can be switched
at 3 second intervals.
FUR FI-504*
Furuno 2nd Station Display
The FAP5011A is a single-din sized display
designed for use in a NavPilot 500 or NavPilot
511 system where multiple stations are desired.
Multi-station capability, maximum of six stations,
is available through the utilization of a high speed
network. The FAP5011A is supplied with all of the hardware
required to connect to the NavPilot system.
FUR FAP5011A*
* Request Item
3.6” Display
Analog Wind Transducer
FI-5001 Capable of detecting wind angle
accuracy of better than ±10° and wind
speed accuracy of better than ±5% (20
kt). The FI-5001 has a power requirements of less than 40 mA on a
12VDC system.
▪▪Note: The FI-5001 Sensor does not come with a cable
FUR FI-5001*
*Request Items
Fusion
N
Sailing on the cutting edge of innovation and True-Marine™ product design, FUSION is a pioneer in the industry,
creating built - for - purpose marine entertainment solutions that integrate your favourite media devices for superior
on - water listening and unbeatable environmental protection.
Introducing the flagship 750 Marine Entertainment Series, the pinnacle of FUSION ingenuity and craftsmanship, which
is setting the standard for the entire marine industry.
Available with an internal UNI-Dock MS-UD750 or marine DVD/CD player MS-AV750 and supporting the latest Apple
iOS, MTP Windows/Android and USB media devices. Featuring Bluetooth AVRCP/A2DP audio streaming capabilities,
support for Pandora and advanced FUSION -Link NMEA 2000/Ethernet/Wi- Fi/Bluetooth connectivity, the FUSION 750
Marine Entertainment System is the next generation in the FUSION dynasty.
MULTI-ZONE TECHNOLOGY- 4 ZONES
FUSION-Link WIRED CONTROL- VIA NMEA 2000 & ETHERNET
FUSION-Link WIRELESS CONTROL- VIA WI-FI & BLUETOOTH
A2DP BLUETOOTH AUDIO STREAMING WITH AVRCP
PANDORA RADIO
INTERNAL UNI-DOCK MS-UD750 ONLY
HDMI CONNECTOR WITH ARC AUDIO RETURN CHANNEL MS-AV750 ONLY
360° 1P x5 WATER RESISTANT
BUILT-IN CLASS-D AMPLIFIER WITH SIDE FIN COOLING- 280 WATTS
INTUITIVE APPLE & MTP AUDIO CONTROL
OPTICALLY BONDED COLOR LCD
Fusion
750 Series UNI-DOCK Stereo
AM/FM/Bluetooth/USBx2/AUXx2/iPod/iPhone/MTP/SiriusXM
Ready (Requires optional Sirius XM connect tuner)
Designed to offer water resistant protection of any compatible
smartphone or media player from the harsh marine environment.
Engineered to securely house the world’s most popular smart devices,
while keeping them charged and ready. Included are 3 connector
cables (Apple 30-Pin, Apple Lightning™ and Micro USB) for
unrivaled connectivity and unmatched playback possibilities.
▪▪3 Year Warranty
FUE MS-UD750
Fusion 750 Series DVD Player
AM/FM/CD/DVD/ACR/Bluetooth/USB/AUXx2/iPod/iPhone/MTP/
SiriusXM Ready (Requires optional Sirius XM connect tuner)
Fully intigrated DVD playback solution. The MS-AV750 intoduces
a standard definition HDMI connection for quick plug and play
copatability with any supported TV or monitor.
Includes ARC functionallity, allowing a single HDMI cable to stream
audio to the Fusion stereo, eliminating the need for any additional
cabling.
▪▪3 Year Warranty
FUE MS-AV750
Electrical / Electronics
W
E
FUSION 750 SERIES MARINE ENTERTAINMENT SYSTEM
67
68
Fusion
N
Electrical / Electronics
W
E
FUSION 650 SERIES MARINE ENTERTAINMENT SYSTEM
In the ever-evolving electronics industry, FUSION positions itself firmly at the forefront. At FUSION we approach
audio engineering from the perspective of the boat enthusiast, incorporating the smartest marine technologies and
environmental protection to produce an unrivaled fusion of form and function.
Introducing the exciting new FUSION 650 Entertainment Series, available in two models: MS-UD650 Internal
UNI -Dock and MS -AV650 DVD/CD System. Offering superior playback of your favorite USB, Apple iDS and MTP
Android/Windows media devices, the 650 features FUSION-Link NMEA 2000 control, Bluetooth A2DP audio streaming
capabilities and Pandora radio support, for a true symphony of audio technologies.
MULTI-ZONE TECHNOLOGY- 3 ZONES
FUSION-Link WIRED CONTROL - VIA NMEA 2000
FUSION-Link WIRELESS CONTROL - BLUETOOTH
A2DP BLUETOOTH AUDIO STREAMING WITH AVRCP
PANDORA RADIO
INTERNAL UNI-DOCK MS -UD650 ONLY
COMPONENT AND COMPOSITE VIDEO CONNECTIONS MS-AV650 ONLY
360° IP xS WATER RESISTANT
BUILT-IN CLASS-D AMPLIFIER WITH SIDE FIN COOLING- 280 WATTS
INTUITIVE APPLE & MTP AUDIO CONTROL
OPTICALLY BONDED LCD
Fusion 650 Series UNI-DOCK Stereo
Fusion 650 Series DVD Player
AM/FM/B lu etooth/USBx2/ AUXx2/i Pod/ iPhone/MTP/Sirius-XM
Ready (Requires optional SiriusXM connect vehicle tuner)
Designed to offer water resistant protection of any compatible
smartphone or media device from the harsh marine environment .
Engineered to securely house the world’s most popular smart devices,
while keeping them charged and ready. Included are 3 connector
cables (Apple 30-Pin, Apple Lightning and Micro USB) for unrivaled
connectivity. The MS-UD650 will house products which are equal to
or less than the following dimensions 137mm x 71mm x 13mm (5.39 x 2.80 x 0.51 inches).
▪▪3 Year Warranty
AM/FM/CD/DVD/ Bluetooth/USB/ AUXx2/ iPod/iPhone/MTP/
Sirius-XM Ready (Requires optional SiriusXM connect vehicle
tuner)
Relax after a day of boating fun with FUSION‘s fully integrated
DVD playback solution. The MS-AV650 introduces both composite
and component video connections for complete convenience. All
DVD functions are accessible from either the front panel controls,
included IR remote or Bluetooth remote app.
▪▪3 Year Warranty
FUE MS-UD650
FUE MS-UV650
69
Fusion
N
W
E
FUSION BLACK BOX MARINE ENTERTAINMENT SYSTEM
Fusion
Black Box Marine Entertainment System
FUE MS-BB300R
Complete system
When space is premium at the helm, a compact entertainment solution is needed to blend performance and subtlety;
Introducing the full featured Black Box Entertainment System MS-BB300R from FUSION Entertainment. Featuring
FUSION- Link Wired NMEA 2000 control, A2DP Bluetooth audio streaming with AVRCP, advanced Multi -Zone
technology in three zones and support for the latest Apple and MTP Android/Windows devices. The MS-BB300R is a
true ‘plug and play’ compact entertainment powerhouse. Complete with a MS-NRX200i Wired Remote control, 3.5mm
Auxiliary and USB panel mount connector, the MS-BB300R is a complete system for any serious boater.
MS-BB300: AM/FM/Bluetooth/USB/AUXx2/iPod/iPhone/MTP/Sirius-XM Ready
(Requires optional SiriusXM vehicle connect tuner)
FUSION-Link WIRED CONTROL- VIA NMEA 2000
MULTI-ZONE TECHNOLOGY- 3 ZONES
BLUETOOTH STREAMING WITH AVRCP
APPLE iOS & MTP ANDROID/ WINDOWS MEDIA PLAYBACK
FUSION Link
FUSION - Link Certified Multi - Function Displays provide on-screen control of the audio entertainment onboard your vessel
when utilizing an existing Ethernet or NMEA 2000 network. The following marine electronics manufacturers support FUSION - Link:
Raymarine, Furuno, Lowrance, Garmin, Simrad , Humminbird, B&G and Murphy, providing quick access to your iPod/iPhone music library
via song, artist, album, genre and playlist. Navigate stereo sources including AM, FM, VHF, USB, MTP, CD, DVD, Bluetooth and adjust the
volume in each individual audio zone from the touch screen interface of any supported MFD for convenient and smart control.
FUSION - Link is available on the NavNet
TZtouch Series
Available on the following models:
HDS G2 and HDS G2 Touch
Available on the following models:
ASeries , CSeries, ESeries and GS Series
Available on the following models:
NSO Evo 2 and NSS Evo 2
Available on the following models:
GPSmap 6000, 7000, 527, 741 and 8000 series
Available on the following models:
ION and ON IX Series
LEARN MORE AT FUSION-LINK.COM
Available on the following models:
Zeus, Zeus Touch and Zeus 2
Available on on select Regal and
Mastercraft vessels
(refer to the manufacturer for compatible vessels!)
Electrical / Electronics
SYSTEM INCLUDES
MS-BB300
Black box
MS-NRX200i
Wired remote
ACCESSORIES Panel mount USB & 3.5mm auxillary cables
70
Fusion
FUSION 205 SERIES MARINE STEREO
Electrical / Electronics
MULTI-ZONE TECHNOLOGY- 2 ZONES
FUSION-Link WIRED CONTROL - VIA NMEA 2000
AMAZINGLY SIMPLE CONTROLS
BLUETOOTH AUDIO STREAMING- MS-BT200 & MS-BT100 Ready*
VHF RECEIVER
APPLE lOS & MTP ANDROID/ WINDOWS MEDIA PLAYBACK
* Requires MS-BT200/MS-BT100 Bluelooth module! Software upgrade may be required. Sold separately.
Fusion Marine 205 Stereo
▪▪AM/FM/VHF/AUX/USB/iPod/iPhone/MTP/SiriusXM-Ready
(Requires optional SiriusXM Vehicle Connect Tuner)
▪▪Can be expanded with the optional MS-UNIDOCK to house,
charge and playback USB/iPod/iPhone and MTP audio devices
(sold separately)
▪▪3 Year Warranty
FUE MS-RA205
Parts:
FUE MS-RA200MP*DIN mounting plate
FUE MS-HUGMS Gimbal mounting kit MS-RA50,200,205
* Request Item
▪▪200 Watts Max (50W x 4)
▪▪NMEA 2000 Certified
▪▪FUSION-Link (NMEA 2000 Only)
▪▪Large 2.6” daylight viewable LCD
▪▪1Px5 water resistant on the front (when bulkhead mounted)
▪▪Multi-Zone Control-2 amplified audio zones. Name each zone for added
convenience
▪▪Multi-language user interface-English, French, Italian, German,
Spanish and Dutch
▪▪Line out & subwoofer out
▪▪Bluetooth streaming requires optional MS-BT200 or MS- BT100 (sold
separately)
▪▪W: 6-3/16” x H: 2-11/16”
FUSION 50 SERIES MARINE STEREO
AMAZINGLY SIMPLE CONTROLS
ADVANCED iPod USER INTERFACE
COMPACT DESIGN
360° IPxS WATER RESISTANT
BLUETOOTH READY- MS-BT100 MODULE REQUIRED (SOLD SEPARATELY)
Fusion 50 Stereo
FUSION ‘s most compact and cost effective marine stereo ever.
The MS-RA50 has a shallow flush mount depth of only 55mm
(2-1/8”). perfect for small boats and personal watercraft.
Featuring iPod and iPhone music play back and FUSION’s
innovative, easy to use user interface.
▪▪3 Year Warranty
FUE MS-RA50
▪▪80 Watts Max (40W x 2)
▪▪Very compact marine stereo, W: 130 x H: 50 x D: 55mm
▪▪2 Channel system: capable of powering a pair of speakers
▪▪Large 2.6” daylight viewable LCD screen
▪▪Left & right line out - For connection of an external amplifier
▪▪360° I Px5 water resistant
▪▪Multi - language user interface
▪▪MS-RA50: AM/FM/AUX/iPod/iPhone
▪▪ MS-BT100 (sold separately) will enable bluetooth audio streaming
Parts:
FUE MS-IPDOCK-G2 FUE MS-IP15L2
FUE MS-RA200MP*
* Request Item
iPod external dock
Accessory cable
DIN mounting plate
► Also See
Bluetooth Modules pg 73
Fusion
71
FUSION REMOTE / MEDIA DOCKING SOLUTIONS
Fusion
Wired Remote
FUE MS-NRX200i
FUNCTIONS AS A NMEA 2000® REPEATER
▪▪Compatible with MS-AV750, MS-UD750, MS-IP700, MS- IP700i,
MS-AV700, MS-AV700i, MS-AV650, MS-UD650, MS-88300 & MSRA205
▪▪NMEA 2000 Certified
▪▪1Px5 Water Resistant
▪▪FUSION-Link NMEA 2000 Ready
▪▪Large 2.6” Monochrome FSTN LCD screen
▪▪Screen is high contrast, viewable in direct sunlight
▪▪Key and LCD adjustable backlighting
▪▪Compact size for ease of installation
▪▪Mounting hardware included
Fusion
Universal Media Device Dock
Designed to offer water resistant protection of any compatible
smartphone or media device from the harsh marine environment.
Engineered to securely house the world’s most popular smart devices,
while keeping them charged and ready. The MS-UD650 will house
products which are equal to or less than the following dimensions
137 x 71 x 13mm (5.39” x 2.80” x 0.51”).
▪▪Compatible with MS-UD750, MS-AV750, MS -UD650, MSAV650, MS-AV700, MS-AV700i, MS-IP700i, MS-BB300 and
MS-RA205
▪▪2 Mtr (6 .5 It) installation cable included
▪▪Easy charge connections
▪▪150mm cables included, Apple 30 Pin, Lightning and Micro-USB
▪▪IPx5 Water Resistant on the front of the dock
▪▪3 Year Warranty
FUE MS-UNIDK
W
E
N
FUSION SIGNATURE SERIES SPEAKERS
GERMAN CURV CONE TECHNOLOGY
SILK DOME TWEETER
FULLY SEALED CROSSOVER COMPONENTS
DUAL-COLOR DIFFUSED LED LIGHTING*
IP65 WATER RESISTANT DESIGN
* LED Lightning not available with the Classic White Speakers
6.5” 230 WATT
FUE SG -F65W
White, Classic
FUE SG-FL65SPW White with LEDs
FUE SG- FL65SPG Grey with LEDs
7.7” 280 WATT
FUE SG-F77W
White, Classic
FUE SG-FL77SPW White with LEDs
FUE SG- FL77SPG Grey with LEDs
Available in a 6.5” or 7.7” speaker format, with DualColor diffused LED lighting options that illuminate
Striking Blue or Sparkling White (illumination
excludes classic) to set the mood.
CURV is a woven fibre composite. which is heat pressed, to form a
lighter and stronger cone that delivers greater sound definition and
higher output, with resistance to the marine environment.
Combining ‘CURV’ Cone composite technology with a Silk Dome
Tweeter and fully sealed Crossover components has resulted in a
speaker that delivers premium sound definition, higher output and
excellent integrated acoustic performance.
Electrical / Electronics
▪▪Control the entertainment experience directly
from any individual audio zone of your vessel
with the addition of a MS-NRX200i
▪▪Most stereo functions and control of the volume,
balance and subwoofer level are available
▪▪Simply Plug & Play. Rated True-Marine
▪▪Cutout: 2” diameter
▪▪Faceplate: 4-3/8” x 2-11/16”
▪▪3 Year Warranty
Electrical / Electronics
72
Fusion
Fusion Full Range 2-Way Speakers
Fusion Subwoofer
▪▪Complies with IP65 water resistant
standards
▪▪Fully sealed cross-over, magnet and
tweeter
▪▪German ‘CURV’ cone material
▪▪Titanium dome tweeter
▪▪Complies with ASTM standards for UV stability
(ASTM-D4329) and salt/fog resistance (ASTM-B117)
Designed to produce unparalleled bass in the
marine environment. Added to our audio system,
marine subwoofers increase the bass level of
your music or improve the overall sound quality.
To operate your subwoofer correctly you must
also install a 2 or 4 channel amplifier.
▪▪Mounting depth: 4-1/2”
▪▪Come with Ice White speaker covers
FUE MS-FR4021
4”, 120 watts max
▪▪Includes Ice White & Midnight Black speaker covers
FUE MS-FR6021
FUE MS-FR7021
6”, 200 watts max
7”, 260 watts max
Fusion Shallow Mount Speakers
Designed with flush profile tweeters and a compact basket
depth for simple shallow mount installation.
▪▪Water resistant construction
▪▪Woofer Type: 6" polypropylene cone
▪▪Tweeter Type: PEI cone
▪▪Box Type: Sealed
▪▪Peak Power: 150 watts
▪▪Efficiency: 85dB
▪▪Frequency Response: 60Hz - 22kHz
▪▪Impedance: 4 Ohm
▪▪Mounting depth: 1-5/8"
FUE MS-EL602
Fusion 2-Way Box Speakers
▪▪Outdoor box speakers are carefully designed and
manufactured specifically for marine/outdoor use
▪▪Adjustable mounting bracket with all
mounting hardware supplied
▪▪Tweeter: PEI cone
▪▪Max. power: 100 watts
▪▪Frequency response: 80Hz-20kHz
▪▪Impedance: 7 ohms
▪▪H: 7-7/8” x W: 5-3/8” x D:5-7/16”
FUE MS-OS420
Fusion In-Salon Cube Speakers
The MS-BX3020 is a compact wide-range speaker enclosure, with a
sophisticated internal crossover network for crystal-clear sound. The
two-way speaker drivers comprise a high quality 3-inch dampedcone bass to mid-range speaker, paired with a high quality silk dome
tweeter, in an optimised acoustic chamber. Both internal speakers are
conformal coated.
▪▪Waterproof paper cone
▪▪Fabric Dome Tweeter
▪▪Peak Power: 100 watts
▪▪Frequency response: 200–20kHz
▪▪Sensitivity (1W/1M): 85db
▪▪Impedance: 4 ohms
▪▪L: 6-15/32” x W: 3-17/32” x D: 4-13/32”
FUE MS-BX3020
FUE MS-SW10
10”, 400W
Fusion In-Salon Subwoofer
Introducing FUSION’s Signature series purpose built “Internal
Use” Active Subwoofer with a unique active bass reflex system
which combines advanced
subwoofer technology and a
passive radiator to tune a small
volume and driver for better
low frequency performance.
Featuring a 4 channel Class-D
amplifier with 2 channel speaker
output. Designed for dry area
installation.
▪▪6” down firing subwoofer + 6” passive radiator
▪▪Rated Amplifier Power 43 Watts RMS per channel @ 2 Ohms
or 26 Watts RMS per channel @ 4 Ohms
▪▪Built-In Class-D amplifier
▪▪2 Channel speaker output
▪▪Two channels are tuned to provide power to the MS-BX3020
cabin speakers (sold separately)
▪▪Wiring kit included
▪▪19-11/16" x 9-27/32" x 6-27/64"
FUE MS-AB206
Fusion Amplifiers
Add more power to your marine speakers by
connecting a FUSION Marine Amplifier to
your audio system, or install with a subwoofer
to increase the bass level of your music.
Amplifiers feature anti-corrosion treated PCB's and stainless steel end
panels to maximize corrosion protection.
A 2 channel amplifier is used to power a subwoofer, increasing the
level of your audio system
▪▪Dimensions (W) x (H) x (D) 220mm x 260mm x 57.5mm
▪▪65 Watts RMS per channel @ 4 Ohms
▪▪100 Watts RMS per channel @ 2 Ohms
▪▪200 Watts RMS Bridged channel @ 4 Ohms
FUE FM-402
A 4 channel amplifier can be used to power two pairs of speakers and
a subwoofer.
▪▪Dimensions (W) x (H) x (D) 220mm x 330mm x 57.5mm
▪▪65 Watts RMS per channel @ 4 Ohms
▪▪95 Watts RMS per channel @ 2 Ohms
▪▪200 Watts RMS Bridged channel x 2 @ 4 Ohms
▪▪1 Year Warranty
FUE FM-504
Fusion / Jensen
73
Fusion Hi to Low Level Converter
The stainless steel MS-DA51600 will resist
corrosion and the incredible 1600 watt output
(peak) will power 4 speakers and 1 subwoofer
with ease.
Connect from the speaker outputs of a audio system to the line
level inputs of an amplifier. Voltage is stepped down to reduce the
high output level of the audio to match the more sensitive line input
of the amplifier
▪▪Input impedance: 50Ω
▪▪Frequency range: 20Hz - 30 Hz
▪▪Output impedance: 10kΩ
▪▪Dimensions: W: 50 x H: 28 x D: 25mm
FUSION's first 5 Channel Class-D Hi-Fi
Marine amplifier; the key benefit of a Class-D amplifier is low
battery drain with a high output, making this the perfect amplifier
for the marine environment. The MS-DA51600 has conformal
coated PCB's for maximum product life and performance plus
the amplifier chassis acts as a heat sink; reducing component core
temperature and increasing efficiency.
▪▪L: 11-3/16” x W: 8-1/4” x H: 2”
▪▪1 Year Warranty
FUE MS-DA51600*
* Request Item
Fusion Zone Amplifier
At 70 watts x 2, th is compact marine amplifier
is brilliant for adding Multi-Zone audio
throughout your vessel. Class-D amplifier
technology ensures the product has low current
draw and an efficient output, engineered for
2 Ohm stereo stable operation and able to power 4 speakers (2 in
parallel per channel).
▪▪Max Power Rating (Watts): D-Class 70 Watts
▪▪Operating Range 10 -16 volts DC
▪▪Ratings per Channel 20 Watts RMS @ 4 ohms per channel: 33 Watts RMS @ 2 ohms per channel
▪▪2 Channel / 2 Ohm Stable
▪▪Water resistant design / Conformal coated PCB
▪▪Small and discrete size: 128 x 78 x 51mm
▪▪3 Year Warranty
FUE HL-02
Fusion iPod Accessory Cable
Connects your iPod to your marine stereo, enabling full control and
navigation of your iPod through the stereo interface.
Compatible with the following iPod models:
▪▪iPod nano
▪▪iPod classic
▪▪iPod touch
▪▪iPhone
Connects to MS-CD60, MS-CD500, MS-CD600 and MS-AV600
FUE MS-IP15L2
1.5 meters
Connects to MS-RA50
FUE MS-IP15L3
1.5 meters
FUE MS-CLADAP Clarion adaptor plate
FUE MS-HUGMS Gimble mount kit MS-RA50, 200, 205
Jensen
FUE MS-AM702*
* Request Item
Fusion
Bluetooth Adapter - BT100
▪▪Enables Bluetooth audio streaming from a compatible
Bluetooth enabled device
▪▪The MS-BT100 supports direct paired unit control
▪▪Play, Stop and skip tracks and with an effective range of 33'
▪▪Compatible with MS-IP600, MS-AV600, MS-CD600, MSRA200, MS-RA50, MS-AV700, MS-IP700 and MS-RA205
▪▪1 Year Warranty
FUE MS-BT100
Fusion
Bluetooth Adapter - BT200
Enables Bluetooth audio streaming from a compatible
Bluetooth enabled devices. The MS-BT200 supports both
direct stereo and paired unit control. Play, Stop and skip
tracks with song info displayed on screen.
▪▪Effective range of 33'
▪▪Compatible with MS-AV700, MS-IP700, and MS-RA205*
* Software upgrade may be required, visit www.fusionelectronics.
com for details. If Sirius connector is currently in use purchase the
MS-BT100
▪▪1 Year Warranty
FUE MS-BT200
Jensen
Sirius/XM Receiver Kit GEN 3.0
Connect, control and enjoy Satellite
Radio, including new SiriusXM Xtra
Channels, through your compatible
SiriusXM-Ready car stereo. The SXV300
tuner plugs directly into compatible car
stereos from top manufacturers, without the need for special
adapters or translators. The compact size installs easily and
discreetly behind the dash for a fully integrated look.
▪▪Dimensions: W: 3.42" x H: 2" x D: 0.7"
▪▪Weight: 3 oz
▪▪Subscription required (XM compatable only)
JEN SXV300V1M
► Also See
Sirius Antennas pg 97
Electrical / Electronics
Fusion 5-Channel Amplifier
74
Hatteland Display
N
Electrical / Electronics
W
E
▪▪Multitouch
▪▪Type approved
▪▪IP22 rear / IP66 front
▪▪Superior bonding technology
▪▪Module based, tailor-made systems made easy!
▪▪Sunlight readable
▪▪Glass display control™ (GDC), solid state menu system
▪▪Designed to work with Furuno TZT14 and BB systems
Series X Displays Panels offer the ultimate in performance, convenience,
state of the art design and enduring quality for system integrators and boat
builders.
The Series X display range is a flexible monitor solution designed and type
approved for the professional maritime segment, where reliability and long
life time are key pre-requisites for the industry. The product range combines
stunning design and technology with innovative features and options, making
it all that the integrator needs for top class type-approved marine systems.
The multi-input MMD models provide a wide choice of display size and
format for a multitude of shipboard applications, where combining data and
video inputs to a single unit provides maximum flexibility. Be it for ship
navigation, automation or security, this range with all it's possible options
provides a robust and multipurpose platform from which to display and
manage data and multiple camera or sensor videos.
Series X displays feature Glass Display Control™, LED Backlight, TFT
Active-matrix Technology, full dimming and multipower as standard, and
can also accomodate and combine a number of options such as touch screen,
optical bonding, sunlight readability (High Bright) and ECDIS calibration
Screen
Aspect Ratio
Size
Weight
HAT HD 17T21-MMD-MA1-FOGP*
Part #
17" 1280 x 1024 SXGA
4:3
W: 15.35'' x H: 13.82'' x D: 2.89''
6.2kg / 13.6lbs
HAT HD 19T21-MMD-MA1-FOGP*
19" 1280 x 1024 SXGA
4:3
W: 16.89'' x H: 15.04'' x D: 2.93'
9.7kg / 21.3lbs
HAT HD 24T21-MMD-MA1-FOGP*
24" 1920 x 1080 FHD
16:9
W: 23.35'' x H: 15.12'' x D: 2.76''
13.9kg / 30.6lbs
* Request Items
Supported Video Signals: Interlaced HDTV, NTSC, PAL
and SECAM video, Composite Video
Multi-power 115/230VAC - 50/60Hz + 24VDC
Product Features: Dimmable 0-100%, Multi-power AC &
DC, PBP (Picture By Picture), PIP (Picture In Picture)
► Also See
Furuno TZT14 & TZTBB pg 59
Connectors
• DVI IN: 2 x DVI-D 24P (female)
• RGB IN: 2 x HD D-SUB 15P (female)
• Composite Video IN: 3 x BNC (female)
• SCOM RS-422/485: 1 x 5-pin Term. Block 3.81, non-isolated+Buzzer
• RGB OUT: 1 x HD D-SUB 15P (female)
• If Touchscreen: 1 x USB Type A (female)
• Ethernet: 1 x RJ45 (female) for Remote Control
• SCOM RS-232: 1 x D-SUB 9P (female) non-isolated
• Potmeter: 1 x D-SUB 9P (male), - (Potentiometer IN, +5VDC OUT, BRT +/- IN)
• AC Power IN: 1 x Std. IEC inlet
• DC Power IN: 1 x 2-pin Terminal Block 5.08
Hatteland Standard Display Screens
All of the same features as above but without the multitouch features.
Part #
Screen
Aspect Ratio
Weight
HAT HD 17T21-MMD-MA1-FOGA*
17" 1280 x 1024 SXGA
5:4
6.2kg / 13.6lbs
HAT HD 19T21-MMD-MA1-FOGA*
19" 1280 x 1024 SXGA
5:4
9.7kg / 21.3lbs
* Request Items
Safe and Reliable
Inverter/chargers are ETL Listed to the stringent requirements of UL/cUL 458 for
mobile use and/or UL 1741 and CSA for off-grid installations.
Modified Sine Wave or Pure Sine Wave
Magnum Energy is a leading
manufacturer of premium inverter/
chargers for Marine applications.
With over 150 years of combined
inverter design and manufacturing
experience, Magnum Energy
has incorporated new design and
manufacturing techniques to build
some of the industry’s most reliable,
advanced, and cost effective
inverter/chargers and accessories.
Designed, built, and assembled in
the USA.
Look for our state-of-theart battery
charger design, using power factor
correction techniques, an innovative
first in both our sine wave and
modified sine wave platforms.
Most Magnum inverters provide pure sine wave power. Run your TVs, stereos,
plasma screens, and other sensitive electronics without worry. The cost effective pure
sine wave inverter chargers provide clean, reliable power with low total harmonic
distortion (THD) of less than 5%. For an even more cost effective choice, Magnum
also provides modified sine wave inverters. These units will provide power that will
efficiently run 90% of the electronics on the market.
Power Factor Corrected (PFC) Charger
PFC charger is built into all of the inverter/chargers. It uses less energy from a
generator than a standard charger - using 25-30% less AC current than standard
chargers.
Choices
Magnum inverters come in multiple power models and 12, 24, and 48 volt
configurations, allowing you to choose the model that is right for you.
Lightweight
20% lighter than comparable models, Magnum inverters use an aluminum base and
cover that provide noise reduction and corrosion resistance. These lighter weight
models are also designed to be overnight shippable if necessary.
Accessible Design
Extra large AC access cover with terminal screw block and 360° DC connection
terminals with covers make inverters more accessible when needed.
Dual Inputs
With 60 Amp transfer service available on most models, our inverters allow you to
take advantage of the more balanced power of a 120/240 volt generator.
Buy with Ease
All inverter/chargers are backed by a three-year (36-month) or two-year (24-month)
limited warranty.
Accessories to Customize Systems
Available accessories include remote controls, AGS modules, a battery monitor
kit, DC fuses, and series stacking cable kits. Their accessories line utilizes a more
consistent design from one product to another.
Easy-to-use remote for your home, boat, truck, or RV is compatible with all Magnum
inverter/charger models.
Field Repairable
You probably won’t have any problems with a Magnum product, but if you do, the
units are field repairable, saving you time and money if your unit ever needs service.
Your Source for Mobile and Renewable Energy
76
Magnum
Electrical / Electronics
Magnum MM & MMS Series Inverter/Chargers
Magnum
ME Series Inverter/Chargers
The power corrected charger efficiently
charges your batteries even at low AC
voltage, while the modified sine wave
inverter keeps the cost down. Additionally,
the battery temperature sensor works with
the charger for optimum battery charging.
Power Factor Corrected (PFC) Charger: It uses less energy from
a generator than a standard charger – using only 15 amps per 100
amps versus 23 amps used by standard chargers.
▪▪ETL Listed to the requirements of UL/cUL 458
▪▪Designed with Flash programming for memory upgrades
▪▪Mount on a shelf, bulkhead, or even upside down
▪▪Aluminum base and cover
▪▪Multiple ports, including an RS485 communication port for
network expansion, and a remote port
▪▪Comes with an on/off inverter-mounted switch with an easy-toread LED indicator
▪▪Expanded transfer relay: 50 amp transfer service
▪▪Extra large AC access cover with terminal screw block and 360°
DC connection terminals with covers
▪▪All boards can be replaced in the field
▪▪Five stage charging including bulk, absorb, float, equalize, and
battery saver
▪▪Inverter Battery Input: 9 - 17 VDC
▪▪13.75" H x 12.65" W x 8" D
▪▪Three year warranty
MM & MMS inverters provide a cost effective solution for those
with smaller power needs in mobile applications. Versatile, easyto-use, and lightweight, the MM & MMS series provides a reliable
base for your energy system. Units use a PFC (Power Factor
Corrected) charger, which is 85% efficient and the same charger
topology used in all Magnum models. ETL listed to the stringent
requirements of UL/cUL 458, CSA C22.2 #107.1-01 and meets
the KKK-A-822E standard. AC power to continue to pass-thru to
power loads even if the inverter is off.
▪▪Dead battery charging allows charging of batteries that are
extremely low
▪▪Automatic, 4-stage battery charger with power factor correction
▪▪Inverter/charger has a 12 amp AC transfer relay
▪▪The AC input and output are provided with pigtail wires to
allow hard wiring to a main AC distribution panel or inverter
sub-panel
▪▪Neutral-to-ground switching
▪▪Includes 15’ battery temperature sensor
▪▪Dimensions L: 16.6” x W: 8.4” x H: 4.7”
▪▪Two year warranty
Relay capability
............20 AAC (input current for charging and pass through)
Battery temperature compensation
............Yes, 15 ft Battery Temp Sensor standard
Remote available (optional)
............Yes, MM-RC or ME-RC
Internal cooling
............0 to 59 cfm variable speed
Overcurrent protection
............Yes, with two overlapping circuits
Overtemperature protection
............Yes, on transformer and MOSFETS
On/Off with status indicator
............Yes, front mounted and easily accessible
Low battery cutout
............10 VDC, adjustable with the ME-RC remote
MM Modified Sine Wave
Transfer relay capability
......... 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability
......... Bulk, Absorb, Float, Equalize and Battery Saver™
Battery temperature compensation
......... With optional Temp Sensor
Internal cooling
......... 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
......... Yes, with two overlapping circuits
Overtemperature protection
......... Yes on transformer, MOSFETS, and battery
Inverter
Output
Weight
MAG ME 2012
100 amp
2000 VA
38 lbs
MAG ME 2512
120 amp
2500 VA
42 lbs
MAG ME 3112
160 amp
3100 VA
45 lbs
Accessories:
MAG ME RC-50Remote
▪▪Input battery voltage: 9-15.5 VDC
▪▪Rated input battery current 160 ADC
Charger
▪▪Continuous output at 25° C 70 ADC
Part #
Charger
Output
Inverter
Output
Weight
MAG MM1212
70 ADC
1200 VA
20 lbs
Accessories:
Charger
Output
Part #
Inverter
MAG ME RC-50
6 LED remote
MMS Pure Sine Wave
Inverter
▪▪Input battery voltage: 9-17 VDC
▪▪Rated input battery current 133 ADC
Charger
▪▪Continuous output at 25° C 50 ADC
Part #
MAG MMS 1012
Accessories:
Charger
Output
Inverter
Output
Weight
50 amp
1000 VA
23 lbs
MAG ME RC-50Remote
Magnum
77
Magnum
MSH Hybrid Series Pure Sine Inverter/Chargers
The power factor corrected charger
efficiently charges your batteries even
at low AC voltage. The Pure Sine
Wave inverter will power your T.V.s,
stereos, plasma screens, and other
sensitive electronics without worry.
The pure sine wave inverter and
power factor corrected charger provide
clean, reliable inverter power with low
total harmonic distortion (THD) of less than 5%.
▪▪ETL Listed to the requirements of UL/cUL 458
▪▪Designed with Flash programming for memory upgrades
▪▪Mount on a shelf, bulkhead, or even upside down
▪▪Aluminum base and cover
▪▪Multiple ports, including an RS485 communication port for
network expansion, and a remote port
▪▪Comes with an on/off inverter-mounted switch with an easy-toread LED indicator
▪▪Extra large AC access cover with terminal screw block and 360°
DC connection terminals with covers
▪▪All boards can be replaced in the field
▪▪13.75" H x 12.65" W x 8" D
▪▪Three year warranty
Why is the MSH-M Series a
"Hybrid"? Most inverters only
use one source of energy to power
the inverter loads - either from
the incoming AC power (i.e.,
shorepower or generator) or from
the batteries. The MSH-M Series
combines the energy from both
the AC input and the batteries to
power the inverter loads. This
feature gives the inverter the ability
to recharge the battery when there is surplus power, or to deliver
more power to the loads if they require more than the AC input can
supply by itself.
▪▪120 VAC / 60 Hz output
▪▪60 amp AC input and pass-thru capability
▪▪Load Support parallels the inverter output with incoming AC
sources allowing it to run larger loads from smaller generators
▪▪Works with any Magnum accessory, including the AGS,
remotes, and the Magnum router
▪▪13.75" H x 12.65" W x 8" D
▪▪Weight: 55 lbs
▪▪Three year warranty
Inverter
Battery Input
Inverter
Output
Weight
MAG MS 2012
100 amp
9 - 17 VDC
2000 VA
42 lbs
MAG MS 2812
125 amp
9 - 17 VDC
2800 VA
55 lbs
MAG MS 4024
105 amp
18 - 34 VDC
4000 VA
55 lbs
Part #
Magnum
ME 300F & ME 400F Fuse Kits
The Magnum Energy fuse block is
designed to provide code compliant overcurrent protection. It uses a fast acting,
current limiting class-T fuse cartridge
which provides instantaneous protection in the event of a short
circuit but also employs a time delay to allow momentary current
surges common in inverter applications. Rugged injection molded
polycarbonate base and thermoformed ABS cover.
▪▪Dimensions: 2” x 7”
MAG ME 300F
MAG ME 400F
300 amp
400 amp
Magnum Battery Temperature Sensor
MAG ME-BTS-1515’
Transfer relay capability
........60 AAC
Five stage charging capability
.......Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation
.......Yes, 15 ft Battery Temp Sensor standard
Remote available (optional)
.......Yes, ME-ARC-50 or ME-RC (with latest revision)
Internal cooling
.......0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
........Yes, with two overlapping circuits
Overtemperature protection
.......Yes on transformer, MOSFETS, and battery
Part #
Charger
Output
Inverter
Battery Input
Inverter
Output
MAG MSH 3012M
125 amps
9 - 17 VDC
3000 VA
MAG MSH 4024M
125 amps
18 - 34 VDC
4000 VA
Electrical / Electronics
Charger
Output
W
E
Transfer relay capability
..........2 legs at 30 A for 120 V/30 A or 240 V/60 A service
Five stage charging capability
.........Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
Battery temperature compensation
.........Yes, 15 ft Battery Temp Sensor standard
Remote available (optional)
.........Yes, MM-RC or ME-RC
Internal cooling
.........0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
Overcurrent protection
..........Yes, with two overlapping circuits
Overtemperature protection
.........Yes on transformer, MOSFETS, and battery
N
Magnum
MS Series Pure Sine Wave Inverter/Chargers
78
Magnum
Electrical / Electronics
Magnum Remote
The MM-RC25 remote control is designed
to be simple to install and use. It allows easy
on/off control and provides a quick indication
of the inverter and charger operation. This
remote is for the MM and MMS Series that include the battery
charger; such as the MM612AE, MM1212, MM1212AE and
MMS1012 models. This remote can also be used with the ME, MS,
MS-AE, MS-E, RD and RD-E Series inverter/chargers; provided
they do not require any inverter or charger programming changes.
▪▪Cut out: 1-1/2” x 2”
▪▪Panel: 2” x 3”
Works with MM, MM-E,
▪▪25’ cable included
MM-AE, MMS, MMS-E Series
MAG MM RC25
Simple to use, yet allows full set-up of
all the standard and advanced features
available in Magnum inverters. The MEARC also has the option of controlling the
advanced features of the ME-AGS-N Automatic Gen Start and the
ME-BMK Battery Monitor Kit using a network connection to the
inverter. This remote has convenient finger-tip operation, including
the new one-knob programming. 50' cable.
▪▪Face plate: W: 5-7/8" x 3-7/8"
Works with ME, MM612 Inverter,
MM, MMS, MMS-E, MM-AE, MS,
▪▪Cutout: W: 4-7/8" x H: 2-7/8"
MAG ME ARC-50
MSH-M, MSH-RE, MS-AEJ, MS-E,
MS-PAE, MS-PE, RD, RD-E Series
Magnum Remote
Magnum Remote
Simple to use, yet allows full set-up features
of the ME, MM, MS and RD Series inverters.
The ME-RC also has the option of controlling
the ME-AGS Automatic Gen Start using a
network connection to the inverter.
▪▪Non-volatile memory saves your settings even if the power is
disconnected
▪▪The large LCD screen and at-a-glance LEDs display the
inverter/charger status
▪▪Soft keys give access to menus and a rotary encoder knob
quickly scrolls through menus and selects settings
▪▪Multiple functions in one place, including: inverter on/off,
charger on/off, shore power breaker settings, AGS control, meter
button, setup, and technical menus
▪▪*Optional ME BMK kit for full battery monitoring
▪▪Cut out: 2-7/8” x 4-7/8”
Works with ME, MM612
▪▪Panel: 3-3/4” x 5-3/4”
Inverter, MM, MM-E, MMMAG ME RC-50
Magnum
Advanced Remote Control
Panel w/50' cable
AE, MMS, MMS-E, MS,
MSH-M, MSH-RE, MS-AEJ,
MS-E Series, MS-PAE, MSPE, RD, RD-E Series
The ME-RTR is a combination of the
ME-ARC advanced feature remote and a
communication hub for MS-PE parallel
units all in one easy-to-install and operate
unit. The ME-RTR features full inverter/
charger setup and control, four-line LCD
display, four parallel stacking ports for the MS-PE Series inverter/
charger, communication ports for ME-AGS-N or ME-BMK
accessories, and a two wire voltage controlled auxiliary relay.
▪▪Works with MS-PAE, MS, ME and RD-Series
▪▪Panel: 6-/58” x 8-15/16”
▪▪6’ cable included
MAG ME-RTR
Magnum Battery Monitor Module
Gives you a “fuel gauge” type of meter for
your battery bank. It monitors the battery bank
and reports the percentage state of charge, real
time amps, voltage, amp-hours in/out, and
the minimum/maximum DC volts. The MEBMK includes the sense module, sense and
communication cables, and a 500 amp shunt.
* The ME-BMK-NS requires a Magnum inverter with a "Network"
port and a ME-RC (revision 2.0 or higher) or ME-ARC remote
control.
MAG ME BMK
Magnum
79
Magnum
Automatic Generator Start Module
MAG ME AGS-N
Magnum
Smart Battery Combiner
▪▪An easy to use stand alone battery combiner and isolator
▪▪Apply a single charging source to the main battery and the ME-SBC
charges a second battery using a portion of the charge
▪▪Adjustable voltage ranges, automatic on-off points
▪▪Transfers up to 25 amps
▪▪Bi-directional charging
▪▪Panel: 4.2” x 5.4”
MAG ME-SBC
Electrical / Electronics
The Magnum AGS is compatible with
most major generators and is designed to
automatically start your generator* based
on low battery condition or the inside
temperature of the boat.
Adjust the AGS to meet your needs: With the AGS, you can set
the battery start voltage from 10-12 VDC or 20-22 VDC, the start
temperature from 65° - 85°F, the run time from .5 to 6 hours, and the
quiet time with an easy-to-set clock.
Manual start and stop: Auto Gen Start settings do not interfere
with the manual start/stop operation of the generator. Just use any
existing start/stop switch in your coach.
▪▪Selectable cabin temperature for genstart 65-85 °F
▪▪Selectable battery voltage for genstart 10-12 VDC or 20-22 VDC
▪▪Selectable generator run time .5 - 6 hours
▪▪Selectable quiet time 5 choices: 9 pm - 7 am, 9 pm - 8 am, 9 pm - 9 am, 10 pm - 8 am, 11 pm - 8 am
▪▪Clock Adjustable 24-hour clock
The network version AGS allows operation of the AGS via the ME Series remote panel with Magnum
ME & MS series charger/inverters.
▪▪Panel: 5-3/8” x 3-5/8”
Simpler, safer, and more secure boating using
Maretron’s vessel monitoring and control system.
There are hundreds of things to keep track of on your vessel to
assure a safe and secure journey. With the Maretron system, you
can relax knowing that the system is keeping you and your crew
safe by watching for smoke, carbon monoxide, high bilge water,
over heating engines, low batteries, or any other critical system
onboard your vessel 24 hours a day. And with Maretron Cloud
Services, you can check on your vessel from anywhere in the
world. Visit us at www.maretron.com to learn more.
www.maretron.com
Maretron
N
W
E
Vessel Monitoring And Control Touchscreens
81
▪▪8" TFT LCD panel, LED Backlit
▪▪Widescreen aspect ratio 5:3
▪▪800 x 480 pixels
▪▪600 nits brightness (Optically bonded)
MRE TSM800C-01*8"
▪▪13.3" TFT LCD Panel, CCFL Backlit
▪▪Widescreen aspect ratio 16:10
▪▪1280 x 800 pixels
▪▪400 nits brightness (Optically Bonded)
Maretron N2KVIEW Monitoring Software
N2KView is a comprehensive vessel monitoring and control
software that goes beyond simple monitoring. With N2KView®
you get additional functionality including alerts, video, control, and
fuel management. The alerts functionality allows you to setup as
many warnings and alarms as you need so you can be forewarned
of potential problems. With alerts, you can relax knowing that the
system is watching for smoke, CO, high bilge water, or anything
else you deem important. N2KView video capability allows you
to add cameras as part of the monitoring system - for example a
camera in the engine room - or the cameras can be used as part of
the security system. The control functionality gives you the ability
to manage your electrical system; for example, you can turn lights
or pumps on or off directly from N2KView and even tell if the
lights or pumps are burned out and not working. Lastly, the fuel
management function uses information from the fuel flow monitor,
tank monitors, and GPS to provide advanced information like
distance and time to empty as well as fuel rate and fuel economy.
MRE TSM1330C-01*13.3"
* Request Item
Maretron USB Gateway
A gateway for bridging USB equipment using
NMEA 0183 sentences - such as an on-board
computer running navigational software - with an
NMEA 2000 network. The gateway automatically
converts incoming NMEA 2000 messages to
NMEA 0183 sentences so you can continue benefiting from
navigational and charting software that you already own while
enjoying the many benefits of networked NMEA 2000 instruments.
MRE USB100-01
Maretron Internet Protocol Gateway
If you want to run N2KView software on your vessel’s computer,
you will need either a Maretron USB100 or an IPG100, which are
necessary to get sensor information from the NMEA 2000 network
to the computer.
The Internet Protocol Gateway (IPG100) lets
you connect Maretron black boxes (MBB100’s),
Maretron touch screens (DSM800’s), PC’s, Mac’s,
tablets, or smartphones to an NMEA 2000 network
so you can monitor and control your vessel using
Maretron’s N2KView software. The conventional way of viewing
NMEA 2000 information is with a display on the vessel that is directly
connected to an NMEA 2000 network, but with the IPG100, you are
not limited to direct connected displays. With the IPG100, you can use
any device running N2KView software to monitor and control your
vessel from onboard or ashore.
▪▪Works together with N2KVIEW software
There is also a mobile version of N2KView which runs on iPhone
or iPad, or an Android device
Maretron Black Box
Hardware
N2KView software can run on your vessel's computer or on
standalone products like one of Maretron's TSM800C, TSM1330C
displays or the Maretron Black Box (MBB200C) vessel monitoring
computer.
W
E
N
About N2KView
N2KView is completely user-configurable and you are free to
design different screens to your exact needs while easily switching
from screen to screen for monitoring all your systems. Digital
displays, analog gauges, graphic displays, warning lights, bar
graphs, all can be configured exactly how you want them to be. You
can even set the operating limits and color bands for analog gauges
so you know when things are within limits and when they are not.
MRE N2KVIEW
MRE IPG100-01
Monitoring software
A dedicated processing unit that includes
Maretron’s N2KView vessel monitoring and
control software. Unlike a PC that allows any
software to be loaded, the MBB200C runs
only N2KView software making it extremely
stable and dedicated to monitoring and controlling your vessel. The
MBB200C connects to a monitor through a VGA connector and
associated touch screen through a USB or serial port connection.
MRE MBB200C-01*
MRE MBB200CBL-1.0*
*Request Items
Black Box
Cable for black box
Electrical / Electronics
Dedicated touchscreens that include Maretron’s N2KView vessel
monitoring and control software. The N2KView software allows
you to configure as many favorite screens as you want with exactly
the information you want to see. These touchscreens provide an
extremely simple touch interface for monitoring and controlling
critical systems from anywhere on the vessel.
▪▪Solid state disk drives
▪▪Fanless cooling system
▪▪Flush mounting hardware included
▪▪2 isolated NMEA 2000 Connectors
82
Maretron
Electrical / Electronics
Maretron NMEA 2000
GPS Antenna/Receiver
32 channel GPS antenna and receiver capable
of providing five position fixes per second,
accurate boat speed four times per second,
and precision time once per second. An additional benefit of
the GPS200 is that it broadcasts precision magnetic variation
information using the current position and world magnetic model.
The GPS200 automatically decodes GPS correction signals from
Satellite Based Augmentation Systems including WAAS, EGNOS,
or MSAS to provide better than 2.5m accuracy.
▪▪Course over ground
▪▪Latitude
▪▪Speed over ground
▪▪Longitude
▪▪Magnetic variation
▪▪Time
▪▪Satellite status
▪▪Date
MRE GPS200-01
Maretron Solid State Compass
Solid state, rate gyro electronic compass that
provides better than 1° heading accuracy through
±45° of roll and pitch angle, and better than 1° roll
and pitch accuracy in static conditions. It delivers
precise, reliable heading information ten times per second, plus
vessel attitude including pitch and roll readings once per second.
▪▪Compatible with the NMEA 0183 digital interface standard
MRE SSC200-01
Maretron Wind & Weather Station
Maretron’s outdoor weather station measures wind speed and
direction, air temperature, barometric pressure, and relative
humidity. The wind measurement is performed using ultrasonic
sensors, which means there are no moving parts to wear out or to
get caught in the rigging. When used with the Maretron DSM200
display and SSC200 compass, the user will be able to view both
apparent and true wind speed and direction as well as dew point
and wind chill factor.
▪▪3.45” H x 4.25” dia.
▪▪Apparent wind speed
▪▪Apparent wind direction
▪▪Atmospheric pressure
▪▪Air temperature
▪▪Relative humidity
MRE WSO100-01
Maretron Transducer
The J2K100 converts the
following information:
▪▪AC generator current
▪▪AC generator frequency
▪▪AC generator voltage
▪▪Tachometer
▪▪Engine hours
▪▪Coolant pressure
▪▪Coolant water temperature
▪▪Engine oil pressure
▪▪Engine oil temperature
▪▪Boost pressure
▪▪Fuel rate monitoring
▪▪Charging voltage
▪▪Percent engine load
▪▪Percent engine torque
▪▪Rated engine speed
▪▪Vin
▪▪Software id
▪▪Transmission gear
▪▪Transmission oil pressure
▪▪Transmission oil temperature
Gateway The J2K100 is
compatible with any engine,
transmission, or genset equipped
with a J1939 interface, including
products from the following
manufacturers:
▪▪Caterpillar
▪▪Cummins
▪▪Detroit Diesel
▪▪John Deere
▪▪Kohler
▪▪Northern Lights
▪▪Onan
▪▪Perkins
▪▪Steyr
▪▪Volvo Penta
▪▪Yanmar
Maretron Alarm Module
Maretron’s Alarm Module generates visual and audible alerts for
any monitored condition. The Alarm Module can be triggered
by alarms generated by Maretron’s N2KView Vessel Monitoring
System, or by Maretron’s DSM250.
▪▪NMEA 2000 network interface
▪▪Super loud 105db audible alarm
▪▪Bright red led visual alarm
▪▪Green led status indicator
▪▪Multiple selectable alarm patterns
▪▪Waterproof - can be mounted indoors or outdoors
MRE ALM100-01
Maretron Smoke/Heat Detector
W
.6 to 100m depth
MRE J2K100-01
E
MRE DST110-01
Maretron’s J2K100 attaches directly into J1939
networks of compatible engines, transmissions, and
gensets and converts the J1939 data to the new marine
digital interface (NMEA 2000). Critical engine,
transmission, and genset data is then distributed throughout the
vessel over a single cable where it can be monitored by any NMEA
2000 compatible display. The J2K100 can also be used as part of a
complete fuel computer. Simply connect the J2K100 together with
Maretron universal displays (DSM200/DSM250/N2KView) and
GPS antenna/receiver (GPS100).
N
Maretron’s Smart retractable depth/ speed/
temperature transducers, delivers precise digital
depth, accurate speed and exact water temperature
even at speeds above 40 knots - all with no
programming or calibration necessary.
▪▪NMEA 2000 network connectivity
▪▪At 235kHz it can be used with a fishfinder
▪▪Plastic housing is compatible with any hull material
Maretron Engine Gateway
The SH-449CSTE series of self-diagnostic
four-wire smoke detectors continually monitors
its own level of sensitivity and its operational
status, showing a visual trouble indicator if it
encounters conditions out of its sensitivity range
or fails internal diagnostics. The heat detector has a fixed temp
point of 135°C. These smoke/heat detectors do not receive their
power from the NMEA 2000 network.
MRE SH-002
Maretron
83
Maretron Run Indicator Monitor
Maretron brings you plug-and-play engine and vessel monitoring
electronics for distributing critical data throughout the vessel.
Whether you’re down in the engine room or up at the fly bridge, all
the information you need is available everywhere you need it. Gone
are the days of disparate systems that fail to communicate with each
other. With Maretron’s networked electronic components like engine
and tank monitors, vessel data is combined for advanced features
like fuel economy (MPG or GPM) or distance and time to empty
(calculated from engine fuel rate, vessel speed from GPS, and fuel
remaining from tank monitor). Finally, true vessel monitoring on
a single network combining information for display anywhere and
everywhere you need it.
▪▪Monitors and reports the running status of
connected devices
▪▪Works with both AC and DC loads
▪▪Works with both automatically and manually
switched loads
▪▪Can indicate the status of a wide variety of loads: Bilge pumps,
Winches, Running lights, Transfer pumps, Exhaust/intake fans
▪▪Monitors fuel and detects presence of water in fuel
MRE RIM100-01
Maretron Switch Indicator Monitor
Alternating Current (AC) Monitor
Monitors switch closure devices.
Maretron’s ACM100 is a device which monitors AC power sources
and outputs information about these sources onto the industry
standard NMEA 2000® marine data network.
▪▪Heat & Smoke detectors
▪▪Carbon monoxide detectors
▪▪Gas detectors
▪▪Bilge water detectors
▪▪Magnetic switches
▪▪Glass break detectors
▪▪Clogged fuel filter detection (excessive vacuum)
▪▪Door, hatch, and porthole magnetic switches
MRE ACM100-01
Accessories:
MRE M000630*
MRE M000612*
* Request items
100 amp transducer w/cable
400 amp transducer w/cable
MRE SIM100-01
Maretron
Direct Current Relay Module
Contains 6 Direct Current (DC) relays, each
capable of switching up to 10amps. The DCR100
connects directly to an NMEA 2000 network,
so you can turn on and off the relays from any device onboard or
remotely running Maretron’s N2KView software. The DCR100
easily handles resistive DC loads like lights, or inductive DC loads
like pumps and motors. The DCR100 can also be used to switch
AC circuits using external relays. An added benefit of the DCR100
is that it reports the current through each of the six channels. This
allows you to determine if loads are drawing too little electrical
current such as burnt out bulbs, or if the loads are starting to draw
too much electrical current.
▪▪Six relays for on/off control over NMEA 2000 network
▪▪Each relay capable of carrying up to 10 amps
▪▪Individual relay electrical current monitoring
▪▪Automatic relay over current shutdown (shuts down at ≈ 12
amps)
▪▪Automatic relay thermal shutdown (over temperature protection)
Accessories:
MRE BHW100
MRE SH-002
MRE CO-CO1224T*
Bilge high water detector
Smoke/heat detector
Carbon monoxide detector
* Request item
Maretron Temperature Monitor
▪▪Measures the temperature for up to 6
temperature probes
▪▪Four channels for thermistor probes and 2
channels for high temperature thermocouple
probes
▪▪Wide variety of applications supported with optional
temperature probes (see below)
MRE TMP100-01
Accessory Probes:
MRE TP-AAP-1
MRE TP-EGT-1
MRE TP-IP-1
MRE TR3K
Ambient air temperature probe
Exhaust gas temperature probe
Immersion temp probe
Ring/under bolt temperature probe
MRE DCR100-01
Maretron Direct Current (DC) Battery Monitor
An advanced electronic monitoring device used to measure the
voltage and current of any direct current (DC) power source or
load.
▪▪Battery Voltage & Current
▪▪Ripple Voltage
▪▪Battery Case Temperature
▪▪State of Charge
▪▪Time Remaining
▪▪Charge Efficiency Factor
MRE DCM100-01
Accessories:
MRE LEMHTA200-S*
MRE LEMHTA400-S*
MRE LEMHTA600-S*
MRE TR3K
* Request items
200 Amp DC transducer with cable
400 amp transducer w/cable
600 amp transducer w/cable
Ring/under bolt temp probe
Maretron Fluid Pressure Monitor
▪▪Adapts up to six pressure transducers to the
NMEA 2000 network
▪▪Each channel independently programmed to
match pressure transducer characteristics
▪▪Each channel independently programmed in
pressure/vacuum mode or tank level mode
* Pressure transducers up to 5000 PSI available as
a special order
MRE FPM100-01
Pressure Transducers:
MRE PT-0-3PSI-01 0 TO 3 PSI
MRE PT-0-5PSI-01 0 TO 5 PSI
Electrical / Electronics
Maretron Engine / Vessel Monitoring
Electrical / Electronics
84
Maretron
Maretron Fuel Flow Monitor
Maretron Tank Level Monitors
The FFM100 uses state-of-the-art, positive
displacement metering technology for
unprecedented accuracy. Additional
benefits of the positive displacement
metering technology are the elimination
of flow conditioning components such as straighteners and
pulsation dampers. Other flow meter technologies require flow
conditioning components that increase system and installation
cost. The FFM100 also uses true temperature compensation with
embedded temperature sensors within the meters. The returning
fuel is generally hotter than the supply fuel and if not properly
compensated, inaccuracies as much as 5% can occur in computing
the engine’s fuel consumption. The FFM100 also detects
momentary reverse flow in the fuel lines due to fluctuating pressure
caused by the injection pump. Less accurate systems count the
reverse fuel flow as part of the consumed fuel where the FFM100
properly accounts for momentary reverse flow.
Ultrasonic, or sound waves, are transmitted via the TLM100
mounted at the top of the tank and the flight times of the sound
waves to and from the fluid are measured much like a depth sensor.
MRE TLM100-01
MRE TLM150-01
Tank level monitor (40”depth)
Gasoline tank level monitor
Lastly, the FFM100 can be used for fluid types other than fuel (e.g.,
water, oil, etc.) by ordering the appropriate flow sender.
MRE TA-5H-1.5NPT
MRE TAL-1.5NPT
MRE TAL-5H
MRE TFT-5H
Tank adapter
Black water airlock 1.5 NPT
SAE black water airlock
SAE non-disp. hull focus tube
The FPM100 is NMEA 2000 certified so you can view any and
all information anywhere on the vessel using a compatible NMEA
2000® display. The FFM100 is a key component of Maretron's
N2KView® vessel monitoring and control system.
MRE FFM100-01
Fuel Flow Sensors
Connect the fuel flow sensor to the NMEA 2000 network via a
FFM100 fuel flow monitor. The fuel flow sensors are compatible
with fuel, lubricating oil, hydraulic fluid, or other clean petroleum
based products and should not be used with any other fluid types.
MRE M1AR
MRE M2AR
MRE M4AR
2-100 LPH
25-500 LPH
180-1500 LPH
Maretron Tank Level Adapter
The TLA100 is used to adapt commercially available
resistive tank senders to the NMEA 2000 network.
This allows you to observe tank levels anywhere on
the vessel where there are NMEA 2000 compatible
▪▪Adapts American standard (240-30 ohm) resistive
senders
▪▪Adapts European standard (10-180 ohm) resistive senders
▪▪Calibrated for any resistance range from 0 to 300 ohms
▪▪Accommodates irregularly shaped tanks
▪▪16 Programmable tank types including fuel, fresh water,
waste water, live well
▪▪Programmable tank number (s) up to 16 per tank type
▪▪Programmable tank capacity
▪▪Works alongside of analog gauges
MRE TLA100-01
The TLM100 is capable of sensing fluid levels in tanks up to 40”
(1.02m) in depth. It can be used for diesel, fresh water, waste
water, black water, and oil tanks (use TLM150 for gasoline tanks).
Unlike most tank senders that only work with rectangular tanks,
the TLM100 can be calibrated for irregular tank shapes so you can
know the true fluid level in your tanks.
▪▪Diesel tanks
▪▪Fresh water tanks
▪▪Live well tanks
▪▪Waste water tanks
▪▪Black water tanks
Accessories:
Maretron Diagnostic Tool
The N2KMeter is a diagnostic tool for
NMEA 2000 networks that allows users to
validate NMEA 2000 network compatibility
and operations during installation of a device
or complete system, and diagnose possible
network flaws or failures that occur on an
operational network. N2KMeter provides
the detailed technical information an NMEA
2000 troubleshooting expert needs, yet it
simplifies and summarizes, allowing an NMEA 2000 novice to
effectively identify and diagnose network problems. N2KMeter
uses a patented integrated intelligence technique to summarize
multiple NMEA 2000 network operational variables into a single
health index.
MRE N2KMETER-01
Maretron Rudder Angle Adapter
The RAA100 is used to adapt commercially available resistive
rudder angle senders to the NMEA 2000 network. Compatible
with both the American standard (240-33 ohm) and the European
standard (10-180 ohm) resistive senders. Can be calibrated for any
resistance between 0 and 300 ohms. You can also use the RAA100
with existing analog gauges.
▪▪Rudder angle
▪▪Rudder order
MRE RAA100-01
Maretron
Maretron
3.5” High Bright Colour Display
Maretron Micro Cables & Connectors
Maretron's DSM150 is a high-resolution sunlight
viewable color display that interprets and displays
NMEA 2000® instrument, navigation, and vessel
monitoring data. The DSM150 is a user friendly
dedicated marine display with custom screen
configurations and an easy-to-use five-key illuminated
keypad. In addition to the monitoring and display
capabilities, the DSM150 features an alert/ alarm package and
electrical switching capability.
MRE CM-CG1-CF00.50.5m
MRE CM-CG1-CF01.01m
MRE CM-CG1-CF-022m
MRE CM-CG1-CF-033m
MRE CM-CG1-CF-044m
MRE CM-CG1-CF-066m
MRE CM-CG1-CF-1010m
MRE CG1-100METER
Micro bulk cable (gray)
MRE CF-SPWRO5-CF
Powertap tee 5m
MRE CM-CF-4
4 Way multi-port box
MRE FA-CF-ST
Field att.conn.female
MRE FA-CM-ST
Field att.connector male
MRE IT-CM-CF
In-line termination res.
MRE CM-CF-CF
Micro tee
MRE TR-CF
Micro termination res.(female)
MRE TR-CM
Termination res.(male)
MRE M000101
Micro cap for female connector
MRE M000102
Micro cap for male connector
MRE BHF-CM-CF
Micro bulkhead feed-thru
The DSM150 will directly connect with any NMEA 2000®
network and with the exception of AIS data will display any or
all information captured throughout the vessel. Various audio
and visual alarms are also programmable. The DSM150 displays
a multitude of information including AC power, anchor status,
battery, depth, electrical distribution, engine, environment, fuel
management, GPS, heading, navigation, pressure/vacuum, rudder,
speed, status indicators, tanks, temperature, time, transmission,
water makers, weather, wind and more.
The DSM150 includes a comprehensive, flexible alert capability.
Configure audio and visual alerts on virtually any data that the
DSM150 is capable of monitoring. Available alert types include:
▪▪High Alert
▪▪Low Alert
▪▪Inside Radius Alert
▪▪Data Unavailable Alert
▪▪On Alert
▪▪Off Alert
MRE DSM150-02
▪▪Tripped Alert
▪▪Course Alert
▪▪GPS Quality Alert
▪▪Outside Radius Alert
▪▪Inside Radius Alert
▪▪Direction Alert
▪▪Timer Alert
Maretron
Colour Display
A high-resolution sunlight viewable
5.7” colour display that allows
easy interpretation of NMEA
2000® instrument and navigation data through custom display
configurations, featuring an easy-to-use five-key illuminated
keypad.
Unlike traditional single-display units, DSM250 users can choose
numeric, gauge, or graph formats in single or multiple displays,
with cycling options possible for a wide range of favourite data.
These multiple display options conserve mounting space and
reduce overall system cost.
The DSM250 will directly connect with any NMEA 2000 network
and display any or all information captured throughout the vessel.
Various audio and visual alarms are also programmable.
Available alert types include:
▪▪High & low alerts
▪▪Inside radius alert
▪▪Data unavailable alert
▪▪On & off alerts
▪▪Tripped alert
MRE DSM250-01
▪▪Course alert
▪▪GPS quality alert
▪▪Outside radius alert
▪▪Inside radius alert
▪▪Direction alert
▪▪Timer alert
Micro Dbl-Ended Cordsets
Maretron Mini Cables & Connectors
Mini Double Ended Cordsets
MRE NM-NB1-NF-00.50.5m
MRE NM-NB1-NF-01.01m
MRE NM-NB1-NF-02.02m
MRE NM-NB1-NF-03.03m
MRE NM-NB1-NF-04.04m
MRE NM-NB1-NF-05.05m
MRE NM-NB1-NF-06.06m
MRE NM-NB1-NF-08.08m
MRE NM-NB1-NF-10.010m
MRE NG1-100
Mini bulk cable (gray)
MRE FA-NF-ST
Field att. connector female
MRE FA-NM-ST
Field att. connector male
MRE NF-NM4P-NFPowertap
MRE NM-CF-NF
Mini/micro tee
MRE TR-NM
Termination res.(male)
MRE TR-NF
Termination res.(female)
MRE BHF-NM-NF
Mini bulkhead feed 1.5” NPT
MRE NM4P-05
Power cordset 5m
Maretron Mid Single Ended Cordset
MRE DF-DB1-25.0 25M Blue
Maretron Mid Cable Dbl-Ended Cordsets
MRE DM-DB1-DF-00.50.5m
MRE DM-DB1-DF-011m
MRE DM-DB1-DF-022m
MRE DM-DB1-DF-033m
MRE DM-DB1-DF-044m
MRE DM-DB1-DF-066m
MRE DM-DB1-DF-088m
MRE DB1-100
Mid bulk cable (blue)
Electrical / Electronics
Unlike traditional single-display units, DSM150 users can choose
numeric, gauge, bar or graph formats in single or multiple displays,
with cycling options possible for a wide range of favorite data.
These multiple display options conserve mounting space and
reduce overall system cost.
85
You build the boat.
We power it.
Mastervolt offers a complete range of power products designed to work independently
or easily integrate, forming comprehensive systems that meet the boaters’ needs. From
chargers to inverters to batteries to digital switching networked systems, all Mastervolt
products offer advanced technology specifically designed and constructed for marine
applications that meet rigorous global marine standards. With worldwide support,
Mastervolt provides the power to be independent. For more information about the
Mastervolt product line, visit mastervolt.us.
mastervolt.us
Mastervolt
87
N
Mastervolt PowerCharge Battery Chargers
W
E
Clean output:
Electrical / Electronics
♦ PowerCharger includes a regulated power supply
providing a very clean output, no distortion, which
provides better power to the batteries extending battery
life. The charger is able to power your system without
batteries or recover a flat battery.
Powerful:
♦ PowerCharger’s maximum output is rated at peak
(14.4V) rather than at rest (12V). Thus, the PowerCharger
provides more power for your charging needs.
- 20A charger - 288 Watts of power
- 40A charger - 576 Watts of power
Robust connections,
easy installations
Ability to precisely charge your batteries:
♦ PowerChargers can charge lead acid, gel, AGM, spiral
batteries or they can be set to exact voltages during
the charging stages. PowerChargers are power factor
corrected, providing maximum efficiency from the
available source.
Functional design, easy
to install
Compact Size and Lightweight:
♦ PowerChargers utilize high frequency switch mode
technology which makes them very efficient and compact
and eliminates the need for heavy transformers.
Easy-to-Install, Operate, Functional Design:
Clear readout panels
♦ Design includes handles, captive screws and clearly
identified connections. The easy to operate front panel
displays power on/off, settings and state of charge
information.
MSV 44-21-020012V/20A
MSV 44-21-040012V/40A
GENERAL SPECIFICATIONS
44-21-0200
44-21-0400
Nominal input voltage & frequency
120/240 V AC (90-135 & 180-265 V AC), 50/60 Hz
Nominal output voltage
12 V
Total charge current (up to 104 °F)
20 A @ 14.4 V
40 A @ 14.4 V
Number of battery outlets
3 full outputs
Battery type settings
Lead acid, gel, AGM or spiral
Dimensions & weight
8.3”x 5.1”x 2.4” / 2.2 lbs
11.5”x 8.3”x 5.2” / 8.8 lbs
Recommended battery capacity
40-200 Ah
70-350 Ah
Power factor regulations
>0.98
Voltage compensation
Yes, by means of automatic compensation
Temperature compensation
Battery temperature sensor may be purchased separately, part # 41500500
DC consumption
< 5 mA
Display
Unit has a display for charge current/voltage & charger status indication, monitoring up to 3 battery banks
Temperature range
Minus 13 °F to 149 °F, derating above 104 °F
Cooling
Variable speed fans and natural cooling
Sound level
< 52 dBA @ 1 m
Protection degree
IP23
Approvals
CE certifi ed, meets ABYC & UL 1236 requirements EMC FCC Class B
Safety
Over temp. shutdown, ignition protected, overload protection, surge and short circuit protection
MasterBus connectivity
PowerChargers are NOT compatible with MasterBus. Please use the Mastervolt ChargeMaster series.
88
Mastervolt
Electrical / Electronics
Mastervolt Mass Sine Wave Inverters
Mastervolt inverters allow you to easily transform the DC voltage of your 12V or 24V
battery to 120V/60Hz AC.
▪▪True sine wave clean output power for sensitive devices such as electronics
▪▪High surge capacity for motor loads such as air conditioning
▪▪Utilizes high-frequency switch mode technology, highly efficient
▪▪Small, lightweight and quiet
▪▪High surge power output when starting
▪▪AC power always available even without shore power or generator power
▪▪Energy efficient
▪▪Electronic components are perfectly shielded
▪▪Easy installation and operation
▪▪CE Certified, meets ABYC requirements
▪▪Two year warranty
▪▪Mastervolt’s Masterbus CANbus compatible (requires the Masterbus inverter
interface #77-02-0700)
▪▪Optional remote panel #07-04-04110 available
▪▪H: 16.5” x W: 12.5” x D: 5.1”
Part #
MSV 25-01-2000*
MSV 25-02-2500*
DC Input
12V
24V
Continuous
Power
2000W
2500W
Surge
Capacity
4000W
5000W
Weight
20.7 lbs
21.4 lbs
HxWxD
16.5" x 12.5" x 5.1"
16.5” x 12.5” x 5.1
* Request Items
Mastervolt Mass Combi Sine Wave Inverter/Chargers
The Mastervolt Mass Combi includes a professional-grade inverter, automatic transfer switch and advanced three-stage-plus battery charger in a lightweight, compact design. These units are are half the weight, and
consume less than half the power of traditional inverter/chargers.
▪▪True sine wave clean output power for sensitive devices such as electronics
▪▪Utilizes high-frequency switch mode technology, highly efficient
▪▪Mastervolt’s three-step plus charging method guarantees fast, easy charging for all battery types (lead-acid, gel, AGM, lithium ion). The built in memory function prevents overcharging.
▪▪Ability to revive a “dead” battery and functions as a clean DC power supply even with no battery attached.
▪▪Charges two battery banks (second outpout 5A)
▪▪User selectable functions: Low battery cutoff, shore power current, charger amps, charging voltage, battery type,
power boosting and power sharing functions, charger only function
▪▪CE Certified, E certified according to automotive directive 95/54/EG, meets UL and ABYC requirements
▪▪Includes ICC remote panel (70-40-5050), and battery temperature sensor with 19’ cable
▪▪Two year warranty
▪▪Customizing a system is easily accomplished through MasterBus
70-40-5050
▪▪Mastervolt Masterbus CANbus compatible with the Masterbus Combi interface #77-03-0475)
DC Input
Voltage
Continuous
Power
Surge
Capability
Charger
Output
Weight
lbs
HxWxD
MSV 37-01-2505*
12V
2500W
4000W
100A @14.25V
24.3
19.5” x 12.5” x 6.1”
MSV 37-01-4005*
12V
3750W
4000W
200A @14.25V
46.3
19.5” x 12.5” x 11”
MSV 37-02-2505*
24V
2500W
4000W
60A @28.5V
24.3
19.5” x 12.5” x 6.1”
MSV 37-02-4005*
24V
3750W
4000W
100A @28.5V
46.3
19.5” x 12.5” x 11”
Part #
*Request Items
Mastervolt
89
Mastervolt Combi Interface
Remote panel for reading the charge status
of your battery charger, including error
notifications
▪▪Display/read-out: 7 LEDs
▪▪Dimensions: 60 x 65 mm
▪▪Weight: 0.07 kg
▪▪MasterBus powering capability: yes
The Mastervolt Mass Combi can be monitored
and controlled from a MasterBus network via
the MasterBus Combi Interface. This enables
you to add control of your Mass Combi to any
MasterBus display, for example the MasterView Easy panel.
▪▪66 x 78 x 32 mm
MSV 77-01-0050*
*Request Item
MSV 77-03-0475
Mastervolt Master Shunt
Mastervolt Masterview Easy Touch Remote
▪▪Allows the monitoring and control of multiple MasterBus
devices on one panel
▪▪3.5” Touch screen
▪▪Multi language operation
▪▪Compatible with the Mastervolt MasterBus
network plug-and-play
▪▪Low power consumption
▪▪Integrated buzzer
▪▪No external power supply needed
▪▪Night view backlight
▪▪Alarm indication via backlight colour
▪▪Key board lock function
▪▪Flush front mounted and adhesive template
▪▪Fits in Raymarine/Simrad size 110 x 110 x 20mm
MSV 77-01-0305
MSV 07-04-04110*
▪▪Recreational and semi-professional use
▪▪Easy to install using included mounting bracket
▪▪Excellent price/performance ratio
▪▪More power available for two minute intervals,
ideal for active marine telephone use
▪▪50A continuous
▪▪Max. output power: 720 W
▪▪Dimensions: 300 x 76 x 110 mm
▪▪Weight: 1.2 kg
MSV 81400350
*Request Item
Mastervolt Battery Mate
While battery isolators are conventional diode splitters, the Battery
Mate’s technology is electronic and includes mosfets (transistors).
for no voltage drop. Its components compensate for variations
in voltage and ensure that charging continues at the right voltage
level, even with several battery banks, with an alternator maximum
of 160Ah at 12V or 24V. The Battery Mate is easy to install on a
DIN rail (industry standard).
▪▪Protects batteries & onboard
equipment
▪▪Complete charging & simultaneous
charging
▪▪Ignition proof
▪▪Adjustable set-points
▪▪Input: battery charger or alternator
▪▪H: 207 x W: 140 x D: 80 mm
MSV 8-31-16025
2 batteries
Mastervolt Battery Temperature Sensor
MSV 04-15-00800*49’
*Request Items
W
For use with the Mass Sine Series inverters
Model C4-RI, has an inverter on/off switch, an
‘on’ indicator and a 'fault’ indicator. Possible faults
include battery voltage too low, overload, or a short
circuit in the AC circuitry.
▪▪60 x 65 mm x D: 60 mm
Mastervolt 24/12 DC-DC Converter - 50A
E
Mastervolt Remote Panel
MSV 77-02-0100
N
Accessories:
MSV 65-02-100150 15 meter cable for remotes
MasterShunt integrates the main system fuse with the shunt adding
new technology to take analog battery information and turn it into
digital information that can be read on the MasterVolt MasterView
digital touch screen remote displays. All battery conditions, events
and capacity can be displayed. The MasterShunt removes all the
complexity of sense wires, small fuses in signal wires and the main
system fuse.
▪▪Real time clock for auto functions
▪▪300 Amps continuous
▪▪Monitored, built-in 500 amp fuse
▪▪For loads over 300 amps use two shunts
▪▪Compatible with Mastervolt’s MasterBus
CANbus network
▪▪Auto start/stop for the generator
▪▪5.9" x 5.9" x 2.5"
Electrical / Electronics
Mastervolt MasterView Read-Out
90
Professional Mariner
E
W
Electrical / Electronics
N
Professional Mariner
Gen-3 ProSport Series Battery Chargers
▪▪Promar digital technology
▪▪System ok and battery bank trouble
status indicators
▪▪Digital multi-stage performance
charging
▪▪Energy saver mode
▪▪Storage recondition mode
▪▪Distributed-on-demand technology
▪▪Digital led display and battery type
selector
▪▪Built-in quality & safety
▪▪Pre-wired for easy installation
▪▪90-135VAC input
▪▪Two year warranty
Professional Mariner ProNauticP Battery Chargers
▪▪12 selectable charge profiles
▪▪Conservation energy saver mode
▪▪Dual digital displays with power output bar
▪▪On board self test start up diagnostics
▪▪Automatic battery health mode
▪▪LED illuminated service and fault modes
▪▪Automatic fan speed control
▪▪Automatic temperature compensation
(probe included)
▪▪Global AC input 100-260 VAC 50/60 hz
▪▪Power factor corrected: fully automatic wide range AC input
▪▪L: 10.25” x W: 8.5” x H: 3.5”
▪▪5 year warranty
Part #
Volts
Amps
Banks
Weight
PRO 63120
12
20
3
5 lbs
PRO 63130
12
30
3
5 lbs
PRO 63140
12
40
3
5 lbs
Volts
Amps
Banks
LxWxH
Weight
PRO 43006
12
6
1
7.125” x 7.25” x 2.75”
2 lbs
PRO 43008
12/24
8
2
8.375” x 7.25” x 2.75”
3 lbs
PRO 43012
12/24
12
2
9.875” x 7.25” x 2.75”
4 lbs
Optional Remote Display
PRO 43020
12/24
20
2
12.125” x 7.25” x 2.75”
5 lbs
PRO 43021
12/24/36
20
3
12.125” x 7.25” x 2.75”
6 lbs
When installed, it will display the current status of
the charger along with the voltage and amperage.
1. The blue LED is illuminated when the power is ON
2. BACKLIGHT can be set to ON or OFF by toggling the BACKLIGHT button, default is ON
3. ALARM can be silenced or audible by toggling the ALARM button, default is audible
▪▪Includes cable and network plug
▪▪L: 4-1/4" x W: 2-3/4" x D: 7/16"
Amps
Banks
LxWxH
Weight
PRO 31410
12/24
10
2
9" x 5.25" x 2"
8 lbs
PRO 22034
Professional Mariner
Hand Held Digital Multimeter
▪▪Large LED display
▪▪Back light feature
▪▪Measurement and hold feature
▪▪Built-in EZ stand
▪▪Continuity tone alert
▪▪Test leads and battery included
▪▪5-3/4” x 2-7/8” x 1-1/2”
PRO 87730
W
PRO 10116
Installs easily and does not require a
dedicated monitor to verify the operational
status of the galvanic isolator as required by
non FailSafe Certified galvanic isolators.
▪▪Built on a robust FlatPack semiconductor platform (in the event
of a failure, the ground continuity on-board is not compromised
when connected to AC Shore Power)
▪▪ABYC A-28 July '08 Compliant and Fail Safe Certified
▪▪Certified by Underwriters Laboratories (UL)
▪▪Ignition Protected
▪▪Meets ISO 8846, can be mounted in an engine room
▪▪Shore cord inlet compatibility: Single 15, 16, 20 or 30
▪▪Gold plated terminations
▪▪Input: 120 VAC, 50/60Hz
▪▪L: 6.75" x W: 7" x H: 2.5"
▪▪3 lbs
E
N
▪▪1.5 amp output, designed to maintain batteries up to 250 amp
hours
▪▪Precise voltage regulation (13.4 VDC float mode)
▪▪Does not drain battery if AC is off
▪▪LED light signifies proper operation
▪▪Cannot over charge
▪▪Reverse polarity protected
▪▪Current limiting
▪▪Over temperature protection
▪▪Wall or bulkhead mount, AC cord, and 5 foot DC output wires
▪▪2.2” x 3.5” x 3.9”
W
E
N
Professional Mariner
ProSport Battery Maintainer
W
Volts
Professional Mariner
ProSafeFS Galvanic Isolation
E
Part #
PRO 63100
N
▪▪Fully Automatic Multi-Stage Charging Charge, condition and maintain batteries
with a built-in safe maintenance mode
▪▪Single Preset Charging Profile - Use with
flooded (Lead-Acid) or GEL batteries
▪▪Expanded LED Status Center - At-aglance AC power, charging and ready /
maintain LED indicators
▪▪Distributed-On-Demand Technology - Automatically charges
and maintains your engine crank battery while distributing all
remaining charging amps to your trolling motor batterie(s)
▪▪Built-in Quality & Safety - 100% epoxy filled - Completely
waterproof & shockproof. Dual in-line DC safety fuses (multibank models), reverse polarity, ignition and temperature protection
W
E
W
E
N
Professional Mariner
Battery Charger
N
Part #
91
Samlex
E
N
Samlex
PST Pure Sine Inverters
Samlex
SSW Pure Sine Inverters
▪▪Silent Operation temperature controlled fan
reduces energy consumption
▪▪Extremely low interference
with other devices
▪▪GFCI protected outlets
▪▪1500 and 2000W models can
be hard-wired
▪▪Input: 12 VDC, Output: 120
VAC
▪▪Low idle power draw
▪▪Commercial grade design suitable for heavy duty loads, long
periods of continuous operation & for emergency back up
▪▪Wide operating DC input range compatible with new high
voltage alternators
▪▪Universal Protection Circuit: low voltage, over voltage, over
temperature, over load and short circuit
▪▪Optional remote controls available for select models
▪▪High surge, 2x continuous operating power
▪▪Soft start technology - the unit
ramps up gradually, putting less
strain on the inverter and the load
▪▪Compact and lightweight
▪▪Universal circuit protection:
thermal, battery, overload, short
circuit, earth fault
▪▪350W and 600W units have a USB charging port
▪▪1000W, 1500W, and 2000W models include an LCD ON/OFF remote control
Part #
Watts
Dimensions
Weight
SMX PST-300-12
300
9.69" x 5.76" x 2.58"
3.46 lbs
SMX PST-600-12
600
10.87" x 9.47" x 3.23"
5.9 lbs
SMX PST-1000-12
1000
15.63" x 9.47" x 3.23"
8.8 lbs
SMX PST-1500-12
1500
18.43" x 10.35" x 4.16"
15.6 lbs
SMX PST-2000-12
2000
18.43" x 10.35" x 4.16"
15.6 lbs
Samlex
PST Remote
▪▪For use with PST-600 & PST-1000
▪▪Remote push button on/off
▪▪LED indicators for overload, over
temperature and power 15' of cable
▪▪9 x 6.4 x 2.8 cm
SMX RC-15A
Samlex
PST Remote
▪▪For use with PST-1500 & PST-2000
▪▪LCD indicates AC volts, AC amps,
frequency, power (watts) and power
factor
▪▪15' of cable
▪▪11 x 6.5 x 2.5 cm
SMX RC-200
Part #
Electrical / Electronics
Samlex America, Inc. has manufactured and distributed
power supply products to more than 90 countries worldwide
since 1991. Innovative product designs, strict quality control,
and responsible after sales service provide customers
with high quality power conversion products at extremely
competitive prices.
W
Power Conversion Products
Best Customer Service in the Industry
- Fast delivery backed by extensive inventory in multiple strategically located warehouses
- Pre-sales application specific product selection assistance
- Post sales installation and troubleshooting guidance
- Fully context aware of industry applications in our markets
- Technically competent customer service staff
- ISO9000 Certified
- Minimum 2 Year Warranty
Watts
Dimensions
Weight
SMX SSW-350-12A
350
7.87" x 6.1" x 2.24"
1.5 lbs
SMX SSW-600-12A
600
9.06" x 6.1" x 2.24"
2.0 lbs
SMX SSW-1000-12A
1000
10.43" x 8.74" x 3.46"
5.7 lbs
SMX SSW-1500-12A
1500
12.2" x 8.74" x 3.46"
7.1 lbs
SMX SSW-2000-12A
2000
12.2" x 8.74" x 3.46"
8.4 lbs
92
Samlex
Samlex
Inverter Installation Kits
Part #
Kit contains a pair of heavy duty
gauge cables and a fuse assembly
that is used to connect the inverter
to the battery bank. The fuse
protects your equipment in the
event of a battery short-circuit and
the cables provide a safe and easy
plug and play connection.
▪▪High strand count, annealed copper conductors
Part #
Watts
Dimensions
Weight
SMX SAM-250-12
250
5.9" x 4.5" x 1.8"
0.9
SMX SAM-450-12
450
5.9" x 6.1" x 2.2"
1.2
SMX SAM-800-12
800
8.6" x 7.1" x 2.3"
2.9
SMX SAM-1000-12
1000
9.8" x 7.1" x 2.3"
3.7
SMX SAM-1500-12
1500
11.1" x 8.0" x 3.3"
7.0
SMX SAM-2000-12
2000
13.6" x 8.0" x 3.30"
8.5
Samlex
SAM Remote
▪▪Power ON/OFF
▪▪10' cable with RJ45 Connector
▪▪Bar meter monitor for battery charge
level and output power
▪▪LED indicator lights for: Over & under
voltage protection, Over temperature
protection and Overload protection
▪▪11.5 x 7 cm
SMX SAM-RC
Samlex
Modified Sine Inverter
▪▪100 watt modified sine wave Inverter
▪▪Low interference, high efficiency modified sine
wave DC-AC inverter
▪▪Convert 12 VDC to 115 VAC at an output
frequency of 60 Hz
▪▪Connect through any 12V lighter socket in your
car, boat, truck or RV
▪▪Protection: low battery, over temperature, over
voltage, overload, short circuit, earth fault
▪▪Includes one three prong outlet and a USB
Charging Port (5 VDC, 500 mA)
▪▪LED indicator for power status
▪▪ETL Safety Listed
SMX SAM-100-12
W
▪▪Models 250W to 800W include a
USB charging port (5 VDC, 500
mA)
▪▪Compact design
▪▪Cigar lighter plug and battery
clamps included (250W, 450W and
800W only)
▪▪Load controlled cooling fan
▪▪Low battery input alarm
▪▪Universal protection circuit: thermal, battery, overload,
short circuit, earth fault
▪▪Soft start technology
▪▪Cool surface technology
▪▪Low interference technology
E
N
Electrical / Electronics
Samlex
SAM Modified Sine Inverters
Inverter
Cable
Fuse
SMX DC-1000-KIT
12V, 600-1000 W
24V, 600-2000 W
AWG #4
100 amp
SMX DC-2000-KIT
12V, 1000-2000 W
24V, 2000-3000 W
AWG #2
200 amp
Low-loss ethafoam spacer for
strong mechanical support
Stranded, high-quality tinned
copper inner conductor
maximizes signal strength
Exclusive white fiberglass seals
out moisture to prevent corrosion.
Rugged, high-gloss, non-yellowing
finish assures long-lasting beauty.
High-quality, silver-plated brass
outer element for extended life,
maximum efficiency and superior
mechanical strength
Low-loss polyethylene
dielectric
Stainless steel ferrule
resists corrosion
Ultra efficient, silver-plated
brass choking sleeve
suppresses cable radiation
for maximum on-air signal
Flexible coax that has higher power capabilities,
less loss per foot, UV stable jacketing, stranded
copper core, and copper shielding to help
maximize antenna performance
www.shakespeare-marine.com
94
Shakespeare
Electrical / Electronics
Shakespeare 5' Centre-Fed 1/2 Wave
Coaxial Sleeve VHF Antennas
Outstanding, basic 3dB antenna designed to reduce
signal fading in rough seas. This is probably the most
widely used antenna on coast guard vessels.
▪▪Brass and copper elements
▪▪Chrome-plated brass ferrule with 1”-14 thread
▪▪Includes a PL-259 connect & 15' RG58 cable
▪▪One section
Shakespeare 36" Squatty Body End-Fed
1/2 Wave VHF Antennas
A favourite with sailboat owners, this light weight, low
profile, stainless steel antenna was specially designed for
masthead mounting.
▪▪Hermetically sealed, tin-plated copper wire coil
▪▪Stainless steel body and whip
▪▪SO-239 connector
▪▪Mount: Stainless steel “L” bracket (supplied)
SHA 396-15MHz
The 396-1-AIS has been specially designed to meet
the broader bandwidth requirements of all popular AIS
transceivers
SHA 396-1AIS6MHz
SHA 5215
Same features as the 5215 but comes complete with 60' of
low-loss RG-8/X cable and a PL259 connector
Shakespeare 8' Collinear Phased 5/8 Wave
VHF Antenna
SHA 5215C-X
A favourite of maritime professionals, this rugged antenna
boasts an extra heavy-duty radome and powerful internal
elements for reliable service day after day under the most
demanding conditions.
▪▪Brass and copper elements
▪▪Chrome-plated brass ferrule with 1”-14 thread
▪▪Includes a PL-259 connect & 15' RG58 cable
▪▪One section
Parts:
SHA 5215L/BRKT“L” Bracket for 5215
Shakespeare 36" Low Profile End-Fed
1/2 Wave VHF Antenna
The perfect choice for bass boats, centre console fishing
boats, or any vessel where compact size is most important.
Comes with a standard-duty stainless steel whip. Chrome
plated brass canister minimizes de-tuning.
▪▪Sealed, tin-plated copper wire coil
▪▪Requires mount with centre hole for passage of the
supplied 15’ RG-58 cable. PL-259 connector included
▪▪Stainless steel whip
SHA 5240-R
SHA 5202
Shakespeare 8' End-Fed With Matching Stub
VHF Antennas
Standard whip
Shakespeare 5' Centre-Fed 1/2 Wave Coaxial
Sleeve VHF Antenna
Shakespeare’s most economical 5’ antenna package.
A great, basic 3dB antenna for day-to-day cruising
in calm to moderate seas. The antenna has an
integral polycarbonate Lift-n-Lay mount for deck
mounting, and comes with a levelling plate and
installation hardware.
▪▪Brass and copper elements
▪▪Includes a PL-259 connect & 15' RG58 cable
▪▪Integral deck mount
▪▪One section
An economical and lightweight, self-supporting antenna for
good communications where range is not the predominant
factor.
▪▪Quality copper cable elements
▪▪Chrome-plated brass ferrule with 1”-14 thread
▪▪Includes a PL-259 connect & 15' RG58 cable
▪▪One section
SHA 5206-BL-C
SHA 5206-C
SHA 5206-N
Chrome brass ferrule, black
Chrome brass ferrule, white
Nylon ferrule
For matching CB antenna order SHA 5205
SHA 420
Part #
Length
Gain
Max. Input
Watts
SWR Nominally
Bandwidth within
2.0:1 SWR
Termination
SHA 420
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
15' RG-58 cable
SHA 396-1
5'
3dB
50
1.5:1 @ 156.8 MHz
5MHz
15' RG-58 cable
SHA 396-1AIS
5'
3dB
50
1.5:1 @ 156.8 MHz
6MHz
15' RG-58 cable
SHA 5202
8'
6dB
50
1.5:1 @ 156.8 MHz
3MHz
20' RG-58 cable
SHA 5206-C & N
8'
6dB
50
1.3:1 @ 156.8 MHz
3MHz
15' RG-58 cable
SHA 5215
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
SO-239
SHA 5215C-X
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
60' RG-8X cable
SHA 5240-R
36"
3dB
50
1.5:1 @ 156.8 MHz
7MHz
15' RG-58 cable
Shakespeare
95
Shakespeare
8' Galaxy 'Extra Tough' 6dB VHF Antennas
The Centennial antennas have a high-gloss, polyurethane
finish that won't turn yellow in the sun.
▪▪End-fed with matching stub
▪▪Brass and copper elements
▪▪Chrome-plated brass ferrule with 1”-14 thread
▪▪Includes 15’ RG-58 cable and a PL-259 connector
▪▪Gain: 6dB
▪▪Max. watts: 50
▪▪SWR Nominally: 1.5:1 @ 156.8 MHz
▪▪Bandwidth: 5MHz
▪▪One 8' section
Shakespeare’s best – maximizes range and quality in a great
looking antenna. The new 5225-XT is Shakespeare’s classic
Style 5225 in a new, stronger, stiffer radome. It’s extra tough
for use on hard tops, T-tops, radar arches, or wherever its
extra resistance to high winds and high speeds is welcome.
▪▪Brass and copper elements
▪▪Stainless steel ferrule with standard 1”-14 thread
▪▪20’ RG-8/X low-loss cable plus a PL-259 connector
▪▪Twin to: Galaxy Style 5223 CB antenna
Max. Power Input:..........100 watts
SWR: ..............................nominally 1.5:1 at 156.8 MHz
Bandwidth:......................3 MHz within 2.0:1 VSWR
SHA 5101
Shakespeare Sailboat Racers VHF Antenna
▪▪Super light-weight black stainless steel antenna
▪▪Gold-plated connector
▪▪End-fed, center-loaded design
▪▪Black L-bracket included for mast mounting
▪▪One 15" section
SHA 5216
The Galaxy-XP Silver Series
Galaxy performance starts with innovative and
sophisticated electrical engineering. Then, highly skilled
craftsmen hand assemble and hand finish each antenna,
using only the best materials.
Guaranteed
Galaxy quality comes with a quality
guarantee: five years.
Shakespeare
4' Galaxy 'Little Giant' 3dB VHF Antennas
Center-fed 1/2 wave coaxial sleeve. An outstanding, 4’
antenna of heavy-duty construction for general purpose
communications. It’s at home on T-tops, hard-tops and other
positions aloft, where its small size can deliver maximum
range.
▪▪Brass and copper elements to maximum range
▪▪Stainless steel ferrule w/ standard 1”-14 thread
▪▪Includes 20’ RG-8/X cable and a PL-259 connector
Max. Power Input:......... 50 watts
SWR:.............................. Less than 1.5:1 at 156.8 MHz
Bandwidth:..................... 5 MHz within 2.0:1 VSWR
SHA 5400-XTWhite
SHA 5401-XTBlack
SHA 5225-XTWhite
SHA 5226-XTBlack
Shakespeare 4' Galaxy AIS 'Little Giant'
3dB VHF Antenna
Specially designed to meet the broader bandwidth
requirements of all popular AIS transceivers.
Commercial-grade fibreglass construction.
▪▪Center-fed 1/2 wave coaxial sleeve
▪▪Brass and copper elements to maximize range
▪▪Stainless steel ferrule w/standard 1”-14 thread
▪▪Includes 20’ RG-8/X cable and a PL-259 connector
▪▪One Section
Max. Power Input:..........50 watts
SWR: ..............................nominally 1.5:1 at 158 MHz
Bandwidth:......................5 MHz within 2.0:1 VSWR
SHA 5396-AIS
Shakespeare 2' Galaxy 8dB Wi-Fi Antenna
This Shakespeare Galaxy antenna brings Wi-Fi to the marine
environment. It features an N-type connector and a special
sleeve-collar ferrule design that accommodates larger
diameter coax. Should the antenna ever need to be replaced,
it can be done without rerunning the coax.
▪▪2.4 GHz band
▪▪Hi-tech PCB copper elements
▪▪Stainless steel 1"- 14 thread ferrule with special sleevecollar design
▪▪One section
SHA 5248
Electrical / Electronics
Shakespeare
Centennial Series VHF Antenna
96
Shakespeare
N
Shakespeare 3' AM/FM Antenna
W
E
Electrical / Electronics
This combination antenna features a distributive load
for super signal pulling power. The coil is permanently
sealed in Shakespeare’s white fibreglass.
▪▪Includes 10’ RG-62 coax with Motorola plug
▪▪1”-14 thread for standard mount.
▪▪One section, 39” overall length
Shakespeare
SeaWatch Marine TV Antennas
The SeaWatch series of TV antennas are omni-directional over-theair digital HDTV solutions that bring sleek lines and 360 degrees
high-performance coverage to your watercraft. Designed to accept
common 1”-14 threaded mounts, the antennas are well suited to fit
virtually any application. Everything needed to connect the antenna
to your converter or television is in the box. When paired with an
optional 2-way band separator between the antenna and the amplifier,
these antennas can also receive AM/FM radio signals.
▪▪Frequency Range: VHF:47-230MHz;UHF: 470-862MHz
▪▪Receiving Range: FM/VHF/UHF
▪▪Gain: 30dB
▪▪Noise Figure: 3db
▪▪Max. output lever: 110dBuV
▪▪Impedance: 75ohms
▪▪Connector: F-connectors
▪▪Power Supply: DC 12V, AC 110V
▪▪Dimensions: 19” x 3”
SHA 4351
Shakespeare AM/FM Antenna
This innovative design lets you put an AM/FM
antenna on your boat where it won’t get in the way.
It is a clear tape with embedded antenna elements.
Its permanent adhesive strip lets you attach it
quickly and easily onto your boat’s windshield
or any smooth, nonmetallic surface. It comes with a 6’ cable and
attached “Motorola type” plug.
Package Includes:
▪▪Panel TV antenna
▪▪20’ RG-59 coax cable/F-connectors
▪▪USB/AC/DC power cords
SHA 4353
Shakespeare
AM/FM Marine Band Separator
15” Antenna
▪▪For up to 65 km (40 miles) from broadcast towers
Eliminate the need for separate AM/FM and
VHF antennas. As well operate your AM/FM
and VHF radio at the same time. Includes 10'
of RG-62 coaxial cable and 3' of RG-58 VHF cable.
SHA 4357-S
SHA 3015
19” Antenna
▪▪For up to 120 km (75 miles) from broadcast towers
SHA 3019
For base loaded antennas such as the 5215, 5240-R, 5241-R. W
E
N
Shakespeare
Flat HDTV/FM Antenna
This razor-thin, multi-directional
amplified antenna is the most advanced
dual band (VHF/UHF) antenna on
the market. Designed with Clear Circuit Technology, the embedded
amplifier is able to amplify 100% of the signal at the element to
maximize channel reception and minimize pixelation and dropouts
for the best viewing experience possible
▪▪Low noise amplifier
▪▪Multi-directional
▪▪Recieves ALL local HD broadcast signals
▪▪AC, DC and USB power adapter
▪▪Best suited for areas up to 15 miles from broadcast towers
▪▪Frequency range: 47-230MHz, 470-862MHz
▪▪Receiving Range: FM/VHF/UHF
▪▪Gain: 28dB
▪▪Noise figure: ≤3dB
▪▪Max output level: 100dBuV
▪▪Impedance: 75ohms
▪▪Power supply: AC/DC adapter (DC 12V/50mA)
▪▪Power supply: DTV set-top box (DC 5V/40mA)
▪▪Dimensions: 12” x 13
SHA 2061
Shakespeare
21" Diameter Omnidirectional Marine TV Antenna
Designed specifically for maximum omnidirectional performance
in the marine environment. TV Antenna system includes the
antenna with built-in 1"-14 thread nylon ferrule, AC/DC switchable
power supply, 30' of ultra low loss RG-59 coax cable, and gold
plated screw-on "F" type connectors.
▪▪Omnidirectional antennas capture VHF, UHF, and FM point of
the compass without aiming the antenna.
▪▪21-inch diameter
▪▪110VAC or 12/24 DC power
▪▪Digital HDTV-ready
SHA 2030G
Shakespeare
Shakespeare Galaxy SRA-40
Satellite Radio Antenna
SHA SRA-40
Includes SM31 mounting kit
Shakespeare Galaxy SRA-25
Satellite Radio Antenna
Specially designed for smaller boats. Accommodates a variety of
mounting methods, with or without running its cable through the
mounting surface. Comes with a 25-foot RG-174 cable. Attach to
surfaces up to 1” thick via 9/16” diameter threaded
shaft, or use the included SM-32 surface mounting kit
to secure the antenna to flat surfaces where access to
the area underneath is difficult or impossible.
▪▪H: 3/4" x W: 2-3/8" x L: 2"
▪▪No separate power cable required
▪▪Single cable design for newer receivers
▪▪Shakespeare Limited Warranty: 1 year
SHA SRA-25
Shakespeare Gold Plated Brass Connector
▪▪For RG-8/AU & RG213 coax
▪▪Standard solder type
SHA PL259-G
Shakespeare Gold Plated Brass Connector
▪▪PL-259 connector with UG176 adapter &
DooDad® for RG-8X cable
▪▪Standard solder type
SHA PL259-8XG
Shakespeare Cable Outlet
Chromed brass cable outlet with internal rubber
grommet grips cable for tight bulkhead seals. For
RG-8/AU, 8X, 58, 59, 213 cables.
SHA 4184
Shakespeare Nylon Ratchet Mount
▪▪Solid nylon
▪▪Four-way ratchet design with handle
▪▪For deck or bulkhead mounting
▪▪Standard 1"-14 thread male threads
▪▪For use with small antennas
The Style 4186 is not for use with antennas
longer than 8' in self-supporting mode.
Shakespeare Sirius Antenna Cable Kits
SHA 4186U
For longer cables runs, pick the appropriate length Shakespeare SRC
Series cable kit for your installation. Connectors come pre-installed
on all cables. These cable kits must be run as a
single piece and cannot be joined together.
▪▪50 feet of marine grade RG-58
Shakespeare
Stainless Ratchet Mount
SHA SRC-2525'
SHA SRC-5050'
Shakespeare Automatic Switch
This switch allows you to have two radios on
one antenna. It mounts out of the way. When
keying the microphone on one radio the AS-2
switches the antenna to it automatically.
SHA AS-2
Shakespeare Gold Plated Centre Pin Connectors
The perfect solution to troublesome task of
installing a PL-259 connector or splicing a RG-58
A/U or RG-8/X coax. cable. These revolutionary,
award winning design, connectors are solderless,
fretless, gold plated and botchless. No measuring,
no critical stripping, no fussing with coax. braid
and no tinning.
SHA PL258CP-G
SHA PL259CP-G
For splicing RG-58 A/U and RG-8/X
For RG-58 A/U and RG-8/X
Shakespeare Gold Plated Brass Adapter
▪▪Barrel connector for PL-259 ended cables
SHA PL258-G
Stainless steel antenna base uses a four way
ratchet design with locking handle for deck
or side mount. Standard 1’’-#14 thread, 9/32’’
hole for cable feed.
SHA 4187
Shakespeare Stainless Ratchet Mount
▪▪New designer look, four-way ratchet
mount
▪▪Its simple lines come from a nutless
design
▪▪Standard 1”-14 threads and a special
cable slot that eliminates removal of
most factory installed connectors
▪▪Bolt holes: 5/16” dia,, 3” x 1-1/2" on
centre
SHA 5187
Shakespeare Mounting Shims
Shim kit for ratchet mounts consists of 4
shims, two each with front/back and side/side
slope. Each shim adds a half-notch (5°) tilt.
Stack them for extra height or for compound
angles.
SHA 414
Electrical / Electronics
At a 3.5” diameter, it’s ideal for smaller vessels. The low profile,
white plastic housing mounts in a variety of ways with or without
the included pedestal mount (pictured). When mounted directly to
the surface, the antenna accommodates surfaces up to 1” thick.
▪▪1.36” high (4" with pedestal)
▪▪25-foot low-loss cable and connectors included
▪▪White UV-stabilized ASA plastic housing
▪▪1 year limited warranty
97
98
Shakespeare
Shakespeare Stainless Rail Mount
Shakespeare Extensions
▪▪Ratchet action for quick and easy installation
onto 7/8''-1'' railing
▪▪For antennas up to 8' in length
▪▪Standard 1''-14 thread. 9/32'' hole for cable feed
1 foot, 1" thick white polycarbonate mast extension
for light to moderate duty applications.
Electrical / Electronics
SHA 4190
Shakespeare Stainless Rail Mount
▪▪Ratchet action for quick and easy installation
on to 1" to 1-1/2" railing
▪▪For antennas up to 8' in length
▪▪Standard 1''-14 thread. 9/32"' hole for cable
feed
SHA 4188SL
Shakespeare Economy Nylon Rail Mount
Ratchet action for quick and easy installation
on to 7/8''-1'' railing. Standard 1''-14 thread.
SHA 4721
SHA 4364
4364
▪▪Heavy duty stainless steel extension masts
▪▪1"-14 thread male and female fittings
SHA 4700
SHA 4700-1
SHA 4700-2
6" Extension
1' Extension
2' Extension
4700-1
4 foot moderate duty mast extension. Made from
white polycarbonate fittings. Standard 1"-14
thread, upper male, lower female.
▪▪Actual length 50"
SHA 498
▪▪4-1/2" stainless steel mast extension
▪▪Standard 1"-14 thread
SHA 4006
498
Shakespeare Antenna Rail Mount
Economy stainless steel rail mount. Comes
with adaptors to fit 7/8", 1 & 1-1/4" vertical or
horizontal rails. For use with standard 1"-14
thread antennas. Can also be mounted on flat
surfaces.
SHA 4720
Shakespeare Stand-Off Bracket
Insulated standoff bracket made of white moulded
plastic. Use on antennas of 1", 1-1/8" and 1-1/2"
dia. Includes mounting hardware.
SHA 408-R
Shakespeare
Stainless Straight Mount
4" high, standard 1''-14 thread. Perfect for radar
arches and can be used with a 4364 extension mast.
Uses 1/4" fasteners.
SHA 4365
Shakespeare Flange Mount
Low profile, 1" high mount with standard 1"-14
threads. Great for GPS, marine TV and shorter
antennas.
SHA 4710
Stainless steel
SHA 4711Nylon
Shakespeare Tube Mount
Slip on to a 1" diameter pipe for a 1"-14 thread male
fitting. Can be used with any 1" O.D. stainless tubing.
Attaches easily with set screws.
SHA 4705
Shakespeare 2-1/4" External Speaker
▪▪Mylar cone in a compact white housing
▪▪4 ohm. speaker for input power of up to 5 watts
(RMS)
▪▪Comes with a ratchet action mounting bracket,
hardware mounting kit and six feet of cable with
"mini phone" plug installed
SHA ES-2
Shakespeare Deluxe 4” External Speaker
▪▪4 ohm, speaker with Mylar cone and white plastic
cabinet
▪▪Maximum input power is 8 watts (RMS)
▪▪Comes with a swivel mounting bracket, hardware
mounting kit and six feet of cable with “mini-phone” plug installed
SHA ES-4
Shakespeare Hailer Speaker
▪▪5" external hailer speaker
▪▪White plastic horn speaker rated at 4 ohms
▪▪15 watts (RMS) input
SHA HS-5
4006
99
SmartPlug
SmartPlug Boatside Retrofit Plug & Inlet Kits - 50A
SmartPlug Boatside Retrofit Plug & Inlet Kits - 30A
SMP B50ASSY*
BF50 & BM50S
SMP B30ASSY
BM30S
SmartPlug Connectors - 50A
SmartPlug Systems simplified installation by using the
existing 50 Amp inlet footprint on your boat. Adapters are
available to make the connection between the SmartPlug
and the old style plug trouble-free.
BF30
SmartPlug Connectors - 30A
SmartPlug Systems simplified
installation by using the existing
30 Amp inlet footprint on your boat.
Adapters are available to make the
connection between the SmartPlug and
the old style plug trouble-free.
SMP BF30
SMP BM30S
Boat side plug
Boat inlet with S/S cover,
SMP A1001
Boat side plug cover
Accessories:
The SmartPlug 30 amp inlet and connector have passed all required
testing for product safety certification by Intertek testing services
and are now listed as ETL certified products. The ETL listed mark is
proof of compliance with US & Canadian safety standards
SMP BF50*
SMP BM50S*
Boat side plug
Boat inlet with S/S cover
SMP A1001
Boat side plug cover
Accessories:
*Request Items
A10001
A10001
Electrical / Electronics
A safe alternative that is affordable to upgrade and easy to install.
The development of the boat inlet and cordset for 30 Amp shore
power makes connection between boat and shore power easy and
intuitive. SmartPlug’s design protects against the common causes
of marine fires and electrocution: loose connections and corrosion.
The smart, innovative shape and function of the new shore power
cordsets and inlets provide:
▪▪Overheat protection
▪▪Triple waterproof seal
▪▪No-twist connection
▪▪Double lock system
▪▪Straight pin configuration
▪▪Easy to change over
A safe alternative that is affordable to upgrade and easy to install.
The development of the boat inlet and cordset for 50 amp shore
power makes connection between boat and shore power easy and
intuitive. SmartPlug’s design protects against the common causes
of marine fires and electrocution: loose connections and corrosion.
The smart, innovative shape and function of the new shore power
cordsets and inlets provide:
▪▪Overheat protection
▪▪Triple waterproof seal
▪▪No-twist connection
▪▪Double lock system
▪▪Straight pin configuration
▪▪Easy to change over
100
Techflex
Electrical / Electronics
Techflex FLEXO PET (PT)
Techflex is a globally recognized specialist in the
engineering and manufacture of the most advanced
sleeving solutions and related products for the
management and protection of wires, cables and hoses.
▪▪Fast installation
▪▪Long length capability
▪▪Extreme flexibility
▪▪Reduced volume
▪▪Light weight
▪▪Quick dissipation of moisture
▪▪Unbeatable great looks
Techflex F6
▪▪A unique split, 10 mil PET semi-rigid
braided construction makes it the ideal
solution for situations where ease of
installation is of primary importance
▪▪ The lateral split (25% edge overlap) allows the tube to open
up to accommodate a wide variety of bundling requirements,
and the semi-rigid braid configuration simply closes around the
entire installation without the need for any additional fasteners
(velcro, tape, etc.)
▪▪ F6 will bend to a tight radius without distorting or splitting
open and, unlike full rigid tubing, will not impair or affect the
flexibility of harnesses
▪▪Allows for the addition or removal of wires without disassembly
TFX F6N0.25BK
TFX F6N0.50BK
TFX F6N0.75BK
TFX F6N1.00BK
TFX F6N1.50BK
TFX F6N2.00BK
1/4” x 100’
1/2” x 75’
3/4” x 50’
1” x 50’
1-1/2” x 25’
2” x 25’
Techflex Installation Tools
This simple tool makes installing long lengths of F6 sleeving a
breeze. Just insert your bundle of wires into the shank of the tool
and slide it along the split in the sleeving.
TFX INN0.50OR
TFX INN0.75OR
TFX INN1.00OR
TFX INN1.50OR
1/2” sleeve
3/4” sleeve
1” sleeve
1-1/2” sleeve
Techflex Heavy Wall (HW)
▪▪ HW is commonly used in industrial
and marine applications where
extreme abrasion protection is critical
▪▪The durability of HW makes it ideal
for protecting hoses and cables that
have constant contact with rough and abrasive surfaces
▪▪ HW is the perfect solution for use on chains and cables to
protect painted or laminated surfaces from scuffing and wear
TFX HWN0.38BK
TFX HWN0.63BK
TFX HWN1.00BK
TFX HWN1.50BK
TFX HWN2.00BK25
TFX HWN2.00BK
3/16” - 3/4” x 50’
5/16” - 7/8” x 50’
1/2” - 1-1/2” x 50’
3/4” - 2” x 25’
1-1/2 - 3” x 25’
1-1/2 - 3” x 50’
▪▪ The unique braided construction and
wide expandability allows quick and
easy installation over large connectors
and long runs
▪▪ PT is braided from 10 mil
polyethylene terepthalate (PET) monofilament yarns
▪▪The material has a wide operating temperature range, is resistant
to chemical degradation, UV radiation, and abrasion
▪▪The sleeving cuts easily and cleanly with a hot knife
TFX PTN0.25BK
TFX PTN0.50BK
TFX PTN0.75BK
TFX PTN1.25BK
TFX PTN1.50BK
TFX PTN2.00BK
1/8” - 7/16” x 100’
1/4” - 3/4” x 100’
1/2” - 1-1/4” x 100’
3/4” - 1-3/4” x 50’
1” - 2-1/8” x 50’
1-1/2 - 3-1/2” x 50’
Techflex Clean Cut
▪▪Same specifications as the PET
sleeving with the advantage of
being able to cut the material with
ordinary scissors and still maintain
an extraordinarily fray-resistant end without the
addition of chemical binders or adhesives
▪▪Clean Cut's fray resistant properties allows frequent
expansion of the cut end without unraveling
▪▪When cut with a hot knife, Clean Cut produces a
clean, smooth and virtually frayless end
▪▪Clean Cut is braided for maximum coverage while
still allowing enough expansion for easy installation
TFX CCP0.50BK TFX CCP0.75BK
TFX CCP1.00BK
TFX CCP1.25BK
TFX CCP1.50BK
Techflex
Display Rack
1/4”-3/4” x 100’
5/8”-1” x 75’
3/4”-1-3/16” x 50’
1”-1-1/2” x 50’
1-1/4”-2” x 50’
Shown with product (not included)
This display/dispenser rack
allows easy control of sleeving
inventories and provides a
controlled system of neatly
dispensing directly from the
spools. The rack is constructed from tough ABS plastic, with plenty
of room for a wide range of products. Full visibility and access
ensures easy management of inventory. Simple drop-in replacement
for standard spools.
▪▪Wall or counter mountable
▪▪L: 23-1/2” x H: 6” x D: 10”
TFX DSN0.00BK
Techflex
101
Cutting to Prevent Fraying
1
2
Measure the sleeving to length. Keep
the sleeving relaxed and don’t pull it
as you measure. The most accurate
method is to measure the sleeving on
the actual application. There will be
some foreshortening of the sleeving
as it expands over large bundles or
connectors. Mark the cut line with a
pen or marker.
When the knife is hot, slide the sleeving over the cutting blade. Practice
on a piece of scrap to get a feel for
the procedure. Always cut in a well
ventilated area and avoid inhaling
the fumes. Both the blade and the cut
ends will be HOT. Be careful.
3
4
While the ends are still hot, use an
inverted funnel (needle nose pliers or
scissors also work well) to form the
end into a soft flare. This will allow
the sleeving to easily slide over your
application and accommodate plugs
or connectors without binding.
To install the sleeving over your application, just push the flared end over the
ends of the wires and “walk” the sleeve
down the length of the bundle from
behind. Once the sleeving is in place,
just run your hand over the applied
sleeving to smooth it out.
The F6 Sleeving Tool
If you have ever run wiring through split tubing you know that it can be frustrating. Without this tool, the
more wires you have, the harder it is. When you have to add a wire, it can really slow you down.With this
premium wire loom tool, you can add and remove wires quickly and easily. Simply gather the wires
you want into the installation tool and then insert the tool and wires into any split tubing
or semi-rigid sleeving like Flexo F6. Run the tool through the tubing,
smooth it out with your hand and you are finished.
► Also See
Panther Hot Knife pg 213
Electrical / Electronics
Products displaying this icon should be cut with a hot knife, rope cutter or some other
method for cutting and sealing the ends to prevent fraying during the installation and
assembly process. We offer an assort-ment of tools to accomplish this, ranging from
heavy duty, high volume devices to portable gas powered units.
Choose your lifeline carefully...
All Models Feature: All US, Canadian and International Marine Channels,One-Touch Emergency Channels,
Dual Watch and Triple Watch Memory Channel Scan
FLOATS!
Atlantis 290
Includes:
AC & DC Adapters
Charging Cradle
AAA Battery Holder
External SpeakerMicrophone Jack
Belt Clip
UPC: 050633501702
RATED
Atlantis 295
Dual Band VHF and GMRS
JIS7/IPX7 Submersible Waterproof Level
10 Hour Battery Life, 7 Hour Charge Time
1/2.5/6W (VHF)
Large Easy-to-Read Back-lit LCD
Power Boost Key
Glow Seals
Vibration - GMRS only
Designed to Float
FLOATS!
RATED
Dual Band VHF and GMRS
JIS7/IPX7 Submersible Waterproof Level
10 Hour Battery Life, 7 Hour Charge Time
1/2.5/6W (VHF)
Large Easy-to-Read Back-lit LCD
Power Boost Key
Glow Seals
Vibration - GMRS only
Designed to Float
Includes:
AC & DC Adapters
Charging Cradle
AAA Battery Holder
External Speaker-Microphone Jack
Belt Clip
UPC: 050633501719
Atlantis 250 - Black
Atlantis 250 - White
Atlantis 270
NEW Floating Design
10 Hour Battery Life
1 / 2.5 / 6 watt
Display Size: 18mm x 37mm
Power Boost Key
Glow Seals
Designed to Float
FLOATS!
Includes:
Belt Clip
AC & DC Adapters
Charging Cradle
RATED
FLOATS!
Waterproof
Large Back-lit Display
Powerful 1350 mA
NiMH Battery
Alkaline Battery Capable
1W or 5W Transmit Power
Includes:
Car Charger
Charging Cradle
Alkaline Battery Tray
Lanyard
Swivel Belt Clip
Antenna
UPC: 050633501634
UPC:
05063350095 8 (white)
05063350052 1 (black)
MHS126
MHS75
JIS8/IPX8 Submersible
Floats
Power Boost PTT Key
Emergency Strobe Light
Glow in the Dark Seals
1160mAh Li-Ion Battery Pack
11 Hours Battery Life
1W, 2.5W, or 6W Transmit Power
WX/Emergency Alert
Includes:
AC Charge Cord, DC Charge Cord,
Charging Cradle, Alkaline Battery Tray
Swivel Belt Clip, Antenna and Lanyard
UPC: 050633501573
Large Display
JIS8 Submersible
Up to 11 Hours
Battery Life
1W, 2.5W, or 5W
Transmit Power
Includes:
Clip-on DC Charger
Swivel Belt Clip
Lanyard
Antenna
UPC: 05063350125 2
Handheld Marine VHF Radios
MHS235 – Class D/DSC Radio
FLOATS!
Advanced integrated GPS receiver
JIS8/IPX8 Submersible
Floats
1W, 2.5W, or 6W Transmit Power
WX/Emergency Alert
AUTO Plot to DSC Calls Received
Add Favorite Locations,
find that good fishing spot again
GPS Compass
Power Boost PTT Key
Emergency Strobe Light
Glow in the Dark Power
/PTT Keys/Seals
10 Hours Battery Life
Includes:
AC Charge Cord
DC Charge Cord
Charging Cradle
1140mAh Li-Ion Battery Pack
Accessory Battery Tray
Speaker Microphone
Swivel Belt Clip
Antenna
Lanyard
UPC: 05063350153 5
Fixed Mount Marine VHF Radios
All Models Feature:
UM380 - White
UM380BK - Black
UM415 - White
UM415BK - Black
Includes:
Under Dash Mounting Hardware
Microphone Bracket with Screws
Includes:
Under Dash Mounting Hardware
Microphone Bracket with Screws
UPC Numbers:
05063350141 2 (white)
05063350142 9 (black)
UPC Numbers:
05063350129 0 (white)
05063350130 6 (black)
Waterproof
Large 0.9” x 1.8” Display
Rubber Grip Microphone
Shorter Chassis Design for Versatile Installation
Rejection: 70 dB
JIS8 Submersible
Large 1.2” x 2.2” Display
Channel and Scan Controls on Microphone
Channel Tags
Rejection: 75 dB
©2015 Uniden America Corporation.
Class D Radio with Dedicated 2nd
Receiver for Emergency Channels
DSC Calling with Position Send,
Request and Reply
One Touch Emergency Channels on
Radio and Microphone
Automatic Distress Call
NMEA Input and Output
Automatic Channel Mode
(US/International Canada)
Display Based on GPS Coordinates
All NOAA Weather Channels with
Weather Alert Watch and S.A.M.E.
1W or 25W Transmit Power
Receiver Performance
Sensitivity: 0.27 µV
Memory Channel Scan
Dual and Triple Watch
Dot Matrix Display
Back-lit Display and Keypad
Display Brightness and
Contrast Control
GPS Accessory Compatible
104
Uniden
Electrical / Electronics
▪▪Class D 2nd reciever dedicated to
emergency channel
▪▪Add up to 100 FAVOURITE locations
▪▪GPS with compass
▪▪Auto pilot to DCS distress call
▪▪Emergency STROBE light/flashlight
▪▪Waterproof JIS8 / Floating
▪▪Power Boost key to 6 watts
▪▪Water temperature meter
▪▪Speaker mic included
▪▪AC and DC chargers
▪▪3 year warranty
UNI MHS-235
Uniden MHS-126 VHF Radio
▪▪JIS8/IPX8 submersible
▪▪Power boost PTT key
▪▪Emergency strobe light
▪▪Glow in the dark Power/PTT keys
▪▪1160mAh Li-lon battery pack
▪▪1W, 2.5W, or 8W transmit power
▪▪WX/Emergency alert
▪▪Includes alkaline battery tray
▪▪Slim comfortable grip
▪▪3 year warranty
UNI MHS-126
Uniden MHS-75 VHF Radio
▪▪Compact design
▪▪JIS8 submersible
▪▪Dual/triple/quad watch
▪▪Memory channel scan
▪▪Weather alert
▪▪Variable power (1, 2.5, 3 watt)
▪▪DC clip-on charger
▪▪Runs 11 hours on rechargeable lithium ion battery
(included)
▪▪W: 2.5" x H: 9.25" x D: 1.75"
▪▪3 year warranty
UNI MHS-75
Accessories:
UNI MHS75DC
UNI BADG1100-001*
* Request Item
DC adaptor
AC Adapter
UNI ATLANTIS-290Black
UNI ATLANTIS-295
Camouflage
Uniden Atlantis-270 VHF Radio
The Atlantis 270 features all NOAA emergency weather
channels, as well as all USA, International, and Canadian
marine channels. Meets IPX7 submersible waterproof
standards. Brilliant backlit LCD display makes it easy to
use day or night for the power to go anywhere.
▪▪Floating design
▪▪10-Hour battery life
▪▪1/2.5/6 watt transmit power
▪▪Display size: 18mm x 37mm
▪▪Power boost key
▪▪AC & DC adapters
▪▪Included charging cradle
▪▪Glow seals
▪▪Memory scan
▪▪One touch channel 16/9 key
▪▪Power key
▪▪Size (no antenna): H: 5.35" x W: 2.44" x D:1.53"
▪▪Weight (with battery): 8.46 oz
▪▪3 year warranty
UNI ATLANTIS-270Black
W
E
Uniden MHS-235 VHF Radio
▪▪Dual Band VHF and GMRS
▪▪JIS7/IPX7 Submersible waterproof level
▪▪10 hour battery life, 7 hour charge time
▪▪1/2.5/6W (VHF)
▪▪Large Easy-to-Read back-lit LCD
▪▪Power boost key
▪▪Glow seals
▪▪Vibration - GMRS only
▪▪Designed to float
Includes:
▪▪AC & DC adapters
▪▪Charging cradle
▪▪AAA battery holder
▪▪External speaker-microphone jack
▪▪Belt clip
N
Uniden Atlantis-290 VHF Radios
Uniden
105
Uniden Atlantis-250 VHF Radios
UNI ATLANTIS-250GGrey
UNI ATLANTIS250BKBlack
Accessories:
UNI SM81*
UNI BATY0467-001*
UNI BADG1056-001
* Request Items
Speaker microphone
Antenna, Black
AC adapter, Black
Uniden Atlantis-200 VHF Radio
▪▪Rugged polycarbonate case
▪▪6 AAA 1350 mAh NiMh battery
▪▪Alkaline battery capable
▪▪10 hours battery life
▪▪Waterproof JIS4
▪▪1 /5 watt TX
▪▪NOAA weather alert
▪▪Headset jack
▪▪AC & DC chargers
▪▪3 year warranty
UNI ATLANTIS-200
Uniden Solara D
UM-380 VHF Radios
▪▪Class-D DSC
▪▪All USA, Canadian and
international marine channels
▪▪N.O.A.A. weather channels
▪▪Orange backlit displayand keys for enhanced night vision
▪▪Submersible - meets the JIS7 standards (1 meter for 30 minutes)
▪▪Memory channel scan
▪▪NMEA input/output
▪▪1/25 watt output
▪▪H: 2.95" x W: 6.57" x D: 5.08"
▪▪3 year warranty
UNI UM-380White
UNI UM-380BKBlack
Accessories:
UNI FMB-321
UNI FMB-322B
UNI FMB-322W
Flush mount kit, stainless hardware
Flush mount kit, faceplate, Black
Flush mount kit, faceplate, White
Uniden Oceanus D
UM-415 VHF Radios
▪▪Class-D DSC
▪▪Rugged speaker microphone with
channel, up/down, scan and 16/9 keys
▪▪All USA, Canadian and international
marine channels
▪▪S.A.M.E. emergency/weather alert
▪▪1/25 watt transmit power
▪▪Easy-to-use intuitive menus in full dot matrix display
▪▪Large backlit display for enhanced night vision
▪▪Programmable channel scan means you never miss a call
▪▪10 weather channels
▪▪NMEA input/output
▪▪External speaker capable (4 ohm)
▪▪W: 6.25" x H: 2.5" x D: 6.0"
▪▪3 year warranty
UNI UM-415White
UNI UM-415-BKBlack
Accessories:
UNI FMB-321
UNI FMB-322B
UNI FMB-322W
Flush mount kit, stainless hardware
Flush mount kit, faceplate, Black
Flush mount kit, faceplate, White
Uniden PRO 510-XL CB Radio
▪▪Compact professional CB radio
▪▪LED channel display
▪▪Automatic noise limiter
▪▪4 Segment LED S/RF meter
▪▪Adjustable squelch & volume
▪▪W: 12” x H: 6” x D: 4”
UNI PRO 510-XL
► Also See
Antennas pg 94
Electrical / Electronics
▪▪USA/International & Canadian marine channels
▪▪JIS4/CFR46 waterproof level
▪▪1/5 watt switchable
▪▪Ni-MH and alkaline battery capability
▪▪Instant channel 16/9/Triple watch
▪▪Back lit L.C.D. display & key pad
▪▪N.O.A.A. weather channels with weather alert
▪▪Memory channel scan
▪▪Comes complete with AC/DC charger
▪▪W: 2.75" x H: 11" x D: 1.875"
▪▪3 year warranty
Cruise longer, pump out less
with VacuFlush® toilet systems.
RTE ER
AR AT
SM S W
AT ES
BO SH L
U
FL
Attention Captains & Owners
Powerful vacuum flushing uses a
fraction of the water required by
other electric marine toilets.
All-ceramic electronic-flush VacuFlush toilets
n 0.3 liter per flush at “low” setting;
just under 1 liter per flush at “normal” setting
n Elegant styling complements wide range of interiors
n Ergonomic design for home-like comfort
VF 4800 Series
VF 4700 Series
VF 4600 Series
© 2015 Dometic Corporation
Foot-pedal VacuFlush toilets
n 0.4 liter per flush during normal operation
n Range of styles and colors to fit many head layouts
and interiors
n Larger seats, deeper bowls deliver better comfort
than most marine toilets
Remotely tucked away in the
bilge is the quiet vacuum
generator of a VacuFlush
system. After each flush, it
creates a vacuum reserve
so powerful that, when the
toilet is later flushed, the bowl
instantly clears of all effluent.
JW Vacuum Generator
Complete Toilet System Accessories and Convenience
Products from Dometic - the Leader in Marine Toilets
n Holding tanks
n Sanitation hoses
n Vent filters
n Tank monitors
n Tank treatments
n Discharge pumps n Toilet bowl
cleaner
n Marine toilet
paper
Get the details – including videos
www.dometicsanitation.com
VF 140 Series
VF 5000 Series
VF 500 Series
Appliances / Sanitation
107
DICKINSON
108
DOMETIC
109
EVA-DRY
111
MAGMA
112
NOVA KOOL
120
SEAWARD
124
SEALAND / VACUFLUSH
126
VIKING PROPANE TANKS
135
WEBASTO
136
108
Dickinson
Dickinson Accessories
Dickinson Sea-B-Que Grills
Appliances / Sanitation
S/S propane marine barbecue/oven. Nonstick, no-flare cooking
surface, removable drip tray and deck legs. Roll away hood.
* Request Item
DIC 00-SBQL
DIC 00-SBQS
Dickinson Spitfire Grill
▪▪20 ga. S/S mirror finished top with a grain finished bottom
▪▪Front and side cool touch handles
▪▪Electronic ignition
▪▪Thermometer
▪▪Top rack for grilling perfection
▪▪1/4” rod grills
▪▪Removable drip tray
▪▪Includes black vinyl cover
▪▪Three year warranty on burners
▪▪11,000 BTU of wind proof grilling
▪▪24” W (Overall) x 13” H x 14.75” D
DIC 00-SPT-180
DIC 15-187
DIC 15-150A
DIC 15-150F
DIC 15-150P
SBQ Small
SBQ Large
SBQ Round
Aussie grill, S/S for SPT 180-G
DIC 15-080
DIC 15-184
DIC 15-182P
DIC 15-182S
DIC 15-183P
DIC 15-183S
DIC 15-061
DIC 15-060
DIC 15-110
DIC 15-120
DIC 15-130
DIC 15-189
Drip tray for small/large SEA-B-QUE
Large SEA-B-QUE cover
*Small porcelain grill section
*Small S/S grill section
*Large porcelain grill section
*Large S/S grill section
Replacement burner – small
Replacement burner – large
Regulator w/knob
Universal BBQ thermometer
Hood knob, black plastic
8ft propane hose
*Small & large BBQ's require 4 sections for a complete grill
Dickinson Radex Heater
Utilizes waste water heat produced by a water cooled engine or any
circulating hot water source to generate forced air heat. Stainless
steel construction. Self contained unit includes a single high
efficiency 12V fan and rocker switch.
Flush mount frame or side mount
brackets sold separately. Rear exit
fitting: 3/4” O.D. copper tubing.
▪▪12,000 BTU
▪▪W: 10-3/8” x H: 7” x D: 5”
DIC 00-RAD-1*
15-150A
* Request Item
15-150P
Taft mount for wooden railings
Horizontal/vertical rail mount 7/8”-1”
Rod holder mount adapter
‘Scotty’ rod holder mount adapter
Dickinson Pedestal Mount
The perfect way for you to mount your Sea-B-Que
or Spitfire grill in locations such as a deck, or patio,
boat, swim platform or pontoon boat. Features the
quick release latch for easy removal and storage.
▪▪Screw threaded 5” base plate
▪▪Height: 28”
▪▪Grill height: 30”
DIC 15-150B
15-184
Dickinson Accessories
Small
▪▪10,000 BTU
▪▪Cooking surface: 16” x 9-1/4” (148 sq. in.)
▪▪Overall: W: 24-1/4” x D: 10” x H: 12-3/8”
▪▪Weight: 18 lbs
Dickinson Mounts
Large Sea-B-Que cover
Small Sea-B-Que cover
Small food/drink tray
Large food/drink tray
“Aussie Style” Griddle Pans
DIC 15-200
DIC 15-201
DIC 15-202*
DIC 15-203
Large
▪▪11,000 BTU
▪▪Cooking surface: 19-3/4” x 11-1/5” (227 sq. in.)
▪▪Overall: W: 28" x D: 12-1/4" x H: 14-1/2"
▪▪Weight: 30 lbs
15-187
DIC 15-184
DIC 15-185
DIC 15-180
DIC 15-181
15-150F
Dickinson Newport Propane Fireplace
Ideal for boats up to 30/32 ft. The combustion process is completely
isolated from the inside of the boat by the unique, direct vent design.
A built-in blower provides good heat circulation. Heater is sold with
all accessories including a stainless steel backing plate and 28” of
flexible, double stainless chimney.
▪▪Safe direct venting
▪▪Safe manual ignition
▪▪Blower fan included
DIC 00-NEW-P9000
Width.................8-1/2” / 21.6 cm
Depth.................5-1/2” / 13.75 cm
Height................14” / 35 cm
Weight...............15 lbs / 6.82 kg
Flue Size...........3” / 7.6 cm
Material..............Stainless steel body
Voltage..............12 (0.17 amps)
Fuel...................Propane
Heat Output.......Low 5,500 BTU (fan on)
..........................High 7,500 BTU (fan on)
Dometic
109
W
E
N
DuraSea Rooftop Air-Cooled Air Conditioner
Drop-In Cooling Unit That Requires No Plumbing or Ducting
The DuraSea Rooftop is a 15,000 BTU/hr air conditioner built to endure harsh
marine environments. Ideal for patrol boats, house boats, and other vessels, it is
designed to be installed on a flat deck or rooftop and cool the area directly below.
It is air cooled and requires no plumbing or ducting.
The air-distribution box (ADB), sold separately, attaches to the underside of the
unit. Accessible from the interior cabin, the ADB contains the thermostat, fan
controls, return-air vent and two supply-air vents that blow in opposite directions
for increased cooling capability. The three-speed blower works in cooling and
ventilation-only modes.
Both the condenser and evaporator coils are coated using the ElectroFin E-coat
process which provides superior resistance to salt-air corrosion and UV damage
when compared to spray coating. E-coat employs electrically charged molecules
to coat the components for complete and uniform coverage with no material
bridging between the fins. The E-coat material was salt-spray tested for 5,000
hours, not 1,000 like competing units. In addition, the condenser and evaporator
fans are also corrosion resistant and will not rust. Unlike the competition, we use
oversize coils for improved performance and dehumidification.
Rugged and strong, the DuraSea Rooftop weighs only 103 lbs. (46.7 kg). The
heavy-duty reinforcement plate ties the evaporator and condenser together
to minimize vibration and movement. A vibration-isolating L-bracket on the
compressor and fan motor is incorporated for additional stabilization. Rubber
clamps and bushings further control noise and vibration. The powder-coated base
pan is 15% thicker than other models.
DOE 489516AXX1C0* Rooftop unit, Polar white
Parts:
DOE 3107206.017*
Air distribution kit (ADB), Polar white
Accessories:
DOE 3101121.03*
* Request Items
Heater kit
The air distribution box (3107206.017)
(sold separately) mounts on the
ceiling to provide A/C controls.
Compressor is
bracketed at top as
well as bottom to
minimize vibration
and movement while
under way.
Weather-tight fan
motor and bearings
with a stainless
steel shaft.
■ Air-cooled unit designed for rooftop or deckmount installation
■ No plumbing or ducting required
■ Provides 15,000 BTU/hr of cooling
■ Rugged and strong, yet lightweight
■ High efficiency, low power consumption
■ ElectroFin® E-coat process for superior resistance to corrosion and UV damage
■ Vibration-free operation
■ Compressor stabilization to endure
extreme motion
■ Three-speed high-performance fan for cooling and ventilation
■ Sealed motor and bearings
■ Stainless-steel fan-motor shaft
■ Oversize coils for better performance and dehumidification
■ Environmentally safe R-410A refrigerant
■ Air distribution box (sold separately)
includes mechanical control and interior panel
■ Optional electric heat
Capacity (BTU/hr)
Voltage/Cycle
15,000
115V/60Hz
Run Amps
15.3
Locked Rotor Amps (LRA)
66.0
Refrigerant Type
R-410A
Net Weight (lbs/kg)
103/46.7
Appliances / Sanitation
Key Feaatures
110
Dometic
W
E
N
ENVIROCOMFORT R-410A AIR CONDITIONING KITS
Appliances / Sanitation
Climate Control at the Touch of a Button
Enjoy ideal temperatures on your boat year-round
with EnviroComfort (ECD) self-contained air
conditioning kits - now available with R-410A
refrigerant, an environmentally safe gas. ECD kits
are available in 6,000, 10,000, and 16,000 BTU/
hr cooling and reverse-cycle heating capacities, so you can size the system to suit
your boat for ultimate comfort in a range of climates.
All units have high-velocity blowers with internal motors for a more compact
installation footprint. The blower can be rotated to a horizontal or vertical position
for greater installation flexibility. Units are built on an easy-to-plumb stainlesssteel drain pan, and the pre-installed return-air filter is removable for cleaning.
ECD units are operated by a compact digital display/control that features a bright
green LED display and large buttons. For added installation convenience, the
plastic electrical box can be mounted remotely. ECD kits are ideal for replacing an
air conditioning system or for a completely new air conditioning installation. The
Retrofit Kit (shown above), which includes the ECD unit and digital control, is
designed to replace an old self-contained unit and control.
The ECD 6,000 BTU/hr unit will replace a 5,000 to 7,000 BTU/hr unit; the 10,000
BTU/hr unit will replace an 8,000 to 11,000 BTU/hr unit; and the 16,000 BTU/hr
unit will replace a 12,000 to 16,000 BTU/hr unit. The Installation Kit includes all
air distribution and plumbing components that, when combined with the Retrofit
Kit, comprise a completely new air conditioning system installation for treating one
interior space. If treating a second space is desired, add the Dual Duct Kit, which
includes a “Y” connector, 12.5 ft. (3.8 m) of 4 in. (102 mm) of flexible insulated
duct, and a circular supply air grille.
Air Conditioners
Voltage/Cycle (Hz)/Phase
EDC6 6000BTU
EDC10 10000BTU
EDC16 16000BTU
DOE 207500306
DOE 207500310
DOE 207500316
115/60/1
115/60/1
115/60/1
Full Load Amps (FLA) Coo
4.6
6.7
10.4
Full Load Amps (FLA) Heat
5.9
8.8
13.6
Locked Rotor Amps (LRA)
36.0
42.0
62.0
R-410A
R-410A
R-410A
Compact Digital
Compact Digital
Compact Digital
Height (in/mm)(1)
11.25/286
13.25/337
13.50/343
Width (in/mm)
16.0/406
20.0/508
20.0/508
Min. Depth (in/mm)
8.00/203
8.75/222
10.25/260
Max. Depth (in/mm)
9.00/229
9.63/245
11.25/286
Min. Supply Duct Size (in/mm)
4.00/102
6.00/155
6.00/155
Seawater Connection Size (in/mm)
0.63/16
0.63/16
0.63/16
Net Weight (lbs/kg)(2)
39.0/17.7
58.0/26.3
64.0/29.0
Gross Weight (lbs/kg)
49.0/22.2
68.0/30.8
74.0/33.6
Elec. Box Height (in/mm)
8.75/222
8.75/222
8.75/222
Elec. Box Width (in/mm)
6.50/165
6.50/165
6.50/165
Elec. Box Depth (in/mm)
2.77/70
2.77/70
2.77/70
Refrigerant Type
Control Type
Instalation kit #
DOE 218000106
DOE 218000110
DOE 218000116
Dual duct kit#
DOE 226600094
DOE 226600092
DOE 226600092
Key Benefits
■ High velocity, rotatable blower for
horizontal or vertical installation
■ Environmentally safe R-410A refrigerant
■ Compact Dometic digital display/
control
■ Plastic remote electrical box for
convenience in mounting
■ Stainless-steel drain pan
■ Pre-installed return-air filter, easily
removable and cleanable
■ Small, compact, space-saving design
■ Retrofit Kit includes digital control and
replaces an existing self-contained air
conditioning unit
■ Optional Dual Duct Kit for air conditioning an additional interior space
Installation Kit
Dual Duct Kit
Dometic / Eva-Dry
Dometic
111
Eva-Dry
W
E
N
Dometic Portable Air Purifiers
Eva-Dry Renewable Dehumidifier
Reduce the odors of tobacco smoke,
mildew, mustiness, chemical vapors
and toilets, and inhale fresher, cleaner,
healthier air.
DOE 4210805Unit
* Request Item
500 cubic feet
Eva-Dry Electric (AC) Dehumidifiers
▪▪Powerful, quiet and efficient
▪▪High capacity dehumidifiers uses thermal
electric Peltier technology; no compressor
▪▪Removable water tank
▪▪Auto cut-off with LED indicator
▪▪110V
▪▪1 year limited warranty
▪▪Water Tank Capacity: 16 oz
▪▪6” L x 4 1/2” W x 8 /12” H
▪▪Weight: 3.5 lbs
Parts:
DOE 4210804*
EVA E-500
Replacement lamp
EVA EDV-1100
1100 cubic feet
▪▪Water Tank Capacity: 2 liters
▪▪6 3/4” L x 8 1/2” W x 14” H
▪▪Weight: 7.6 lbs
EVA EDV-2200
Dometic Portable Ice Makers
The ice maker has an energy saving clear window in the lid which
lets you check the ice level without losing cold. A simple ice cube
size selection makes you chose from small, large cubes.
▪▪Stainless steel finish with black lid
▪▪Makes ice in under 15 minutes
▪▪Easy to use front LED display
▪▪UL approved
▪▪Strong recessed handles
▪▪1-year Protection Plus Warranty
▪▪6 foot power cord
DOE HZB 12SA
DOE HZB 15S
HZB 12SA
HZB 15S
Capacity
26 lbs/hour
33 lbs/hour
Dimensions
W:9.5” x D:13” x H:14”
W:15 x D:17” x H:17”
Voltage/Frequency
120V/60HZ/2.4A /(Hz)60
2200 cubic feet
Appliances / Sanitation
Breathe Easy Air Purifiers use innovative
Photocatalytic Nano-Mesh technology
with ultraviolet (UV) light to improve
air quality. The UV bulb inside uses a specific frequency of light that
produces no harmful ozone.
▪▪Built-in fan moves air through unit
▪▪Cleaner air may lessen allergy and asthma symptoms
▪▪Up to 96% reduction in volatile organic compounds (VOCs)
▪▪Up to 99.9% reduction in bacteria, fungi, mold, and pollen grains
▪▪Photocatalytic Nano-Mesh structure is safe, powerful and does not
degrade under intense UV light
▪▪UV bulb is easy to replace
▪▪Effective in areas up to 500 sq. ft. (46 sq. m)
▪▪Worldwide AC power adapter with plugs and 12V DC power plug
included
▪▪W: 6.25" x D: 4.5" x H: 1.75"
▪▪No more disposable crystals
▪▪Safe, non-toxic, natural defense against moisture and mildew
▪▪Requires no batteries or cords for use
▪▪Lasts 30-60 days before renewing (12-16 hrs
with an AC outlet)
▪▪100% renewable, works up to ten years
▪▪Spill and mess-free; non-toxic
▪▪Child and pet safe
▪▪L: 8” x W: 2-1/2” x H: 5-1/2”
The World’s Most Popular Marine Grills
N EW
Gourmet SerieS 2 GrillS
Grills Designed, Built, And Tested By Boaters For Boaters
marine Kettle-2®
Combination Stove & Gas Grill
NESTING COOKWARE
SERVING SHELVES
WIDE SELECTION OF MOUNTS
www.magmaproducts.com
CARRY CASES
Magma
Gourmet
Series 2 Grills
113
COMPLETELY REDESIGNED
CLASSIC
Appliances / Sanitation
OR
NEW Gourmet Series 2 Features:
INFRARED
▪▪Rolled edge construction is safer and elegant
▪▪Glass viewing port on the infrared models
▪▪Dynamic combustion system stays lit in breezy conditions
▪▪Electronic ignition, lights first time every time
▪▪ Full size inner safety shell
▪▪ Reliable piezo crystal ignition
▪▪ Easy-to-read all S/S hermetically sealed thermometer
▪▪ 100% 18-9 mirror polished stainless steel
▪▪ Convenient snap-out dual radiant plate
▪▪ Large cooking grill
▪▪ Oversized perfectly balanced lockable lid
▪▪ Full-length handle
▪▪ Front access, lock-in place grease tray
▪▪ Swivelling valve regulator
▪▪ Fold-Away legs
Shown with
optional mount
& serving shelf
(sold separately)
GOURMET SERIES
▪▪9” x 18” cooking grill
▪▪Grilling area: 162 sq. in.
MGP A10-918-2-CSA
MGP A10-918-2GS-CSAInfrared
W
Magma Newport Series 2
E
GOURMET SERIES
N
Shown with
optional mount
& serving shelf
(sold separately)
Magma Catalina Series 2
▪▪12" x 18" cooking grill
▪▪Large upper grill, for slow grilling or for warming food such as vegetables or bread
▪▪Easy-to-read all stainless steel hermetically sealed
thermometer
▪▪Grilling area: 315 sq. in.
Primary: 12” x 18”
Secondary: 5-1/2” x 18”
MGP A10-1218-2-CSA
MGP A10-1218-2GS-CSAInfrared
Parts:
MGP 10-1056C
MGP 10-1056L
MGP 10-1056R
Centre, infrared anti-flare screen
Left, infrared anti-flare screen
Right, infrared anti-flare screen
W
E
N
Magma offers the largest selection of mounting options and
accessories to customize your grill to your boat.
114
Magma
Magma Rectangular Grill Mounts
Connoisseur Series Features:
Magma Round Rail Mount
▪▪ Inner Safety Shell
▪▪ 100% 18-9 mirror polished stainless steel
▪▪ Convenient snap-out radiant plate
▪▪ Oversized perfectly balanced lockable lid
▪▪ Full-length handle
▪▪ Front access, lock-in-place grease tray
▪▪ Swivelling valve/regulator
▪▪ Fold-away legs
▪▪Extremely strong and features 2-way
adjustment for horizontal levelling
▪▪Quickly detaches without tools
▪▪Leaves no hardware on the rail
MGP T10-380
Magma Dual Rail Mounts
Appliances / Sanitation
Magma offers the largest selection of mounting options and
accessories to customize your grill to your boat.
▪▪Incredibly strong and rigid, will not
slip on the rail
▪▪A unique pivoting design which
allows them to attach to curved rails
or across the corner of a stern rail
CONNOISSEUR SERIES
Magma TrailMate
MGP T10-580
MGP T10-585
▪▪Small compact and powerful
▪▪Fold-away legs
▪▪Front access, lock-in-place grease tray
▪▪Grilling area: 108 sq. in.
Primary: 9” x 12”
▪▪Allows mounting of Gourmet Series
Grills out over the water
▪▪The quick-disconnect system allows
quick disassembly leaving no
hardware on the rail
CONNOISSEUR SERIES
Magma ChefsMate
MGP T10-6801" round rail
MGP T10-685
1-1/4" round rail
▪▪Wind tested for even heat distribution
▪▪Fold-away legs for that quick picnic on shore
▪▪Front access, lock-in-place grease tray
▪▪Grilling area: 162 sq. in.
Primary: 9" x 18"
* Request Item
Magma
Dual Bulkhead or Rail Mount
MGP A10-803-CSA
▪▪Attaches to any vertical flat surface
such as bulkheads, hulls, transoms or
cabin sides
▪▪Horizontal rails up to 2-1/4” high by
any depth
▪▪Vertical rails up to 1- 5/8” wide by any depth
▪▪Some fasteners required for installation
Adventure Series Features:
▪▪ Fold-Away legs
▪▪ 100% mirror polished stainless steel
▪▪ Heat resistant all weather plastic handle
▪▪ Snap-out radiant plate
▪▪ Oversized, balanced, lockable lid
▪▪ Swiveling control valve/ regulator
▪▪ Locking grease tray accessible from either side
MGP T10-540
Bulkhead, square or flat rail
Magma Dual Extended
Square Rail Mount
Magma offers the largest selection of mounting options and
accessories to customize your grill to your boat.
E
N
W
Magma CABO
7/8” or 1” round rail
1-1/8" or 1-1/4" round rail
Magma Dual Extended
Rail Mounts
MGP A10-801-CSA
ADVENTURE SERIES
7/8" or 1" round rail
▪▪Attaches to square or flat rails
▪▪Can also attach to any flat vertical
surface such as bulkheads, gunnels,
transoms, or cabin sides
▪▪Some fasteners required for complete installation
MGP T10-640
Rails up to 2-1/4" high
▪▪Stainless steel construction for lasting
beauty and superior corrosion resistance
▪▪Durable heat resistant all weather plastic handle with air
cooled supports
▪▪Snap-out radiant plate, allows quick, easy clean-up and
perfect even heat distribution
▪▪Lid won’t slam shut and features a draw tight latch which
secures all inner components for transport
▪▪Grilling area: 162 sq. in.
Magma Dual Extended
Square Rail Mount
MGP A10-703-CSA
MGP T10-641
▪▪Attaches to square or flat rails
▪▪Can also attach to any flat vertical
surface such as bulkheads, gunnels,
transoms, or cabin sides
▪▪Some fasteners required for complete
installation
Rails up to 4-1/8" high
Magma
115
Magma Marine Kettle 2
Combination Stove & Gas Grill
▪▪Highly adjustable mount
▪▪Strong, corrosion resistant, and
versatile
NOTE: The "New Style" LeveLock, T10355 is compatible with both the Bait/Filet Mate Tables and the new
Tournament Series Cleaning Stations
▪▪Burner & hi-tech radiant plate & dome
heat distribution design: Allows use as a
grill, stove or oven
▪▪Swivelling, windproof turbo venturi &
control valve design: Virtually eliminates
blow-outs. Places the fuel & valve where it
is convenient to you.
▪▪Hinged lid: Balanced lid will not slam shut
▪▪Reliable Piezo Igniter: Dependable push button lighting
▪▪“Stay Cool” handle with air cooled supports: Cast 18-9 Stainless
▪▪Cast 18-9 stainless L-bracket mount clamp: Indexed for positive
non-slip level mounting
▪▪Fully double lined stainless inner safety shell: Cooler for safety.
▪▪Magma’s patented design utilizes convection cooking: Gives the
hottest temperature with the least amount of fuel.
▪▪9.5 lbs
▪▪Grilling Area: 15” diameter
MGP T10-355
Magma Pow'rGrip/LeveLock
Rod Holder Mount
Mount adjusts and locks in place at
both ends by joining the "LeveLock"
adjustable fish rod holder mount, with the
"Pow'rGrip" adjustable fish rod holder
mount. This allows the "Pow'rGrip" portion of the mount to adjust
to any size rod holder and lock in place, while the "LeveLock"
portion of the mount, adjusts and locks your Magma rectangular
grill.
MGP T10-375
MGP A10-207-CSA Original size
▪▪11.8 lbs
▪▪Grilling Area: 17” diameter
MGP A10-217-CSA Party size
Magma Flush Deck
Socket Mount
▪▪Push button lock pin and includes a
flange gasket with integral flip-up
water seal cap
▪▪Some fasteners required for complete installation
MGP T10-326
Magma Dual Flush Deck
Socket Mount
▪▪Push button lock pin to allow use
while underway
▪▪Includes a flange gasket with integral
flip-up water seal cap
▪▪Some fasteners required for complete installation
MGP T10-526
All Magma Gas Grills use standard disposable
1-lb. propane canisters or adapt to on-board LPG (propane)
or CNG (natural gas) systems
Magma Kettle Mounts
Magma Round Rail Mount
▪▪Quick-disconnect, all angle mounting
▪▪Fits any angle railing and detaches quickly
for storage without tools leaving no
hardware on the rail
MGP A10-080
7/8” or 1” round rail
Magma
Scotty Rod Holder Mount
▪▪Fit the popular Scotty mounts
▪▪Allows the “Marine Kettle” to be locked in
12 different positions
▪▪Quickly disconnects for easy storage
without tools
▪▪Rod holder socket not included
MGP A10-165
Scotty mount
Magma Pow'r Grip
Rod Holder Mount
▪▪Fits most cylindrical type rod holders
▪▪Allows grills to mount in any direction
from the rod holder
▪▪Rod holder socket not included
MGP A10-175
Magma
Flush Deck Socket Mount
▪▪Stainless detent pin lets the grill rotate and
lock in 8 different positions allowing it to be
moved inboard and outboard
▪▪Mount includes a raincap
▪▪Rod portion of mount quickly disconnects for compact storage
▪▪Some fasteners required for installation
MGP A10-126
Appliances / Sanitation
Magma
LeveLock Rod Holder Mount
Appliances / Sanitation
116
Magma
Magma Pedestal Mount
Magma Grill Covers
▪▪There is no need to cut a hole in your deck
▪▪Durable anodized aluminum with a brushed
satin finish
▪▪Pedestal locks into the mounting base and the
grill or table locks to the pedestal
▪▪Grill or table is instantly removable from the
pedestal with a simple push-button release
▪▪Pedestal also is instantly removable from the
mounting base with a push-bottom release
that allows the pedestal to be unthreaded and
removed for storage
▪▪The low-profile, threaded twist-lock surface
mount base measure just 5/8” tall and 7’ in
diameter with a 5-3/4” bolt pattern
▪▪Made of durable anodized aluminum with a
brushed satin finish
▪▪Height: 28”
▪▪Water and fade resistant Sunbrella boat cover material
resists damage from sunlight and mildew
▪▪5 year warranty covers the fabric becoming unserviceable
because of loss of colour or strength from normal exposure
conditions, including sunlight, mildew, rot and atmospheric
chemicals
▪▪1 year warranty on all other components
MGP T10-185
Magma Pedestal Adapter
Gourmet & Connoisseur Series
MGP A10-890JB
MGP A10-990CN
MGP A10-990RB
MGP A10-990JB
MGP A10-990PB
MGP A10-1290JB
MGP A10-1290RB
MGP A10-1291JB
MGP A10-1291RB
Trailmate, Jet Black
Newport/Chefmate, Captain’s Navy
Newport/Chefmate, Royal Blue
Newport/Chefmate, Jet Black
Newport/Chefmate, Pacific Blue
Catalina, Jet Black
Catalina, Royal Blue
Monterey, Jet Black
Monterey, Royal Blue
Required when mounting Magma rectangular
grills to non Magma pedestal mounts (Todd,
Garelick, Springfield)
MGP T10-180
Magma Serving Shelves with
Removable Cutting Board
▪▪18-8 stainless steel detachable serving
shelf with UV stabilized high-density,
FDA approved polyethylene
▪▪Attaches and detaches instantly for quick
and easy clean-up or storage
▪▪Stores inside of grill when not in use
MGP A10-901
MGP A10-902
12” (for Trailmate)
17-1/4” (All rectangular grills except Trailmate)
Magma Storage Bag
▪▪Safe, convenient and essential for boats
without approved propane or butane gas
storage lockers
▪▪Stows 3 disposable butane or propane
canisters safely out-over-the-water
▪▪Made of water and fade resistant heavy duty
nautical blue polyester boat cover material
▪▪Has heavy nylon adjustable straps with snap connectors for
attaching to a horizontal rail or lifeline
MGP A10-210PB
Marine Kettle Series
MGP A10-191JB
MGP A10-191RB
MGP A10-492JB
MGP A10-492RB
Original size, Jet Black
Original size, Royal Blue
Party size, Jet Black
Party size, Royal Blue
Magma Padded Grill & Accessory Carry Cases
▪▪Outfitted with a large storage
compartment for a grill, pockets for
storing a serving shelf, griddle, fish/
veggie tray
▪▪Includes an additional side pocket for
storing up to (2) 1lb. propane canisters
and (2) control valve/ regulators
▪▪Thick padding and heavy duty carrying
handles and strap
MGP A10-992
MGP A10-1292
MGP A10-1293
For grills maximum 9” x 18”
For grills maximum 12” x 18”
For grills maximum 12” x 24”
Magma Padded Kettle & Accessory Carry Case
▪▪Fits most portable kettle grills 17” and under
▪▪100% polyester fabric with thick padding
for maximum protection
▪▪Heavy-duty zippers
▪▪Transports and stores grill, mounts, and
grilling accessories
▪▪Large main compartment for grill
▪▪Additional storage pockets for griddle, fish
and veggie grill tray, grill tools, control
valve/regulators, and disposable 1 lb.fuel
canisters
MGP A10-991
Magma
"Nesting" Cookware Sets:
▪▪ 100% 18-9 mirror polished marine grade stainless steel
▪▪ Store in less than 1/2 cubic foot of cabinet space
▪▪ Locking removable handle for sauté and sauce pans
▪▪ Sealed triple clad bottoms, for even heat distribution
▪▪ Secures for storage with a provided “bungee” cord
▪▪ Oven friendly and dishwasher safe
117
Magma
Nesting Stainless Steel Colander
▪▪100% 18-10 stainless steel
▪▪Use with any Magma 5qt stock pot for preparing
pastas or steaming vegetables
▪▪Nests in all Magma cookware sets for convenient storage
▪▪Collapsible easy-use stainless steel handle
MGP A10-367
Magma
10 Piece Stainless Steel
Appliances / Sanitation
▪▪5Qt. stock pot, 10-1/4” x 4-3/8”
▪▪10” saute/ fry pan
▪▪3Qt. sauce pan
▪▪2Qt. sauce pan
▪▪1-1/2Qt. sauce pan
▪▪Lid for stock pot and saute/ fry pan
▪▪Universal lid for sauce pans
▪▪2 removable handles
▪▪Bungee storage cord
Magma Non-Stick Griddles
▪▪Constructed entirely of cast 400 Series aluminum
▪▪Heavy Duty “Non-Stick” coating
▪▪Reversible; griddle side or grill side
▪▪Grill: deep channels keep grease away from cooking area
▪▪Griddle: high tapered rim keeps food in place
▪▪Removable, rubber coated, stainless steel handle
▪▪Dishwater and oven safe
MGP A10-360LStainless
MGP A10-360LCB Stainless / Cobalt Blue
Induction Cookware
All the same pieces as the standard sets in the Induction
construction.
MGP A10-195
MGP A10-197
8” x 17”
11” x 17”
MGP A10-196
11-1/2” dia.
MGP A10-360LINDStainless
N
W
E
Magma
7 Piece Stainless Steel
Magma Grill Tray
▪▪5 quart stock pot, 10-1/4” x 4-3/8”
▪▪9-1/2” sauté pan, 9-7/8” x 3”
▪▪Stock pot/sauté pan lid
▪▪2 quart sauce pan, 7-5/8” x 3-3/4”
▪▪Sauce pan lid
▪▪1 removable handle
▪▪“Bungee” storage cord
▪▪Use this grill tray and never again worry about the flaky fish,
vegetables, or smaller items falling through the grilling surface
▪▪Can be used as an oven pizza tray or cooking sheet
▪▪304 stainless steel
▪▪Comes with a rubber coated, removable handle
▪▪Oven safe and dishwasher friendly
MGP A10-297
MGP A10-362Stainless
Induction Cookware
MGP A10-362INDStainless
N
W
E
Magma
10 Piece Pro Stainless Steel w/Ceramica Non-Stick
Same feature set as the stainless steel but
coated with heavy duty non-toxic Light
Grey or White Ceramica non-stick.
MGP A10-366
MGP A10-366CB
Light Grey Ceramica / Stainless
White Ceramica / Cobalt Blue
Induction Cookware
All the same pieces as the standard sets
in the Induction construction.
MGP A10-366-IND*
Light Grey Ceramica / Stainless
MGP A10-366CB-IND* White Ceramica / Cobalt Blue
* Request Items
8” x 17”
118
Magma
▪▪Telescoping professional quality-grilling tools
▪▪Manufactured with 18-9 marine grade mirror polished stainless
steel with rubberized soft touch handles
▪▪Choose from (3) usable telescoping lengths for grilling then
collapse to shortest length for space saving storage
▪▪Set includes: Spatula, tongs, fork, grill brush and carrying case.
MGP A10-132T*
* Request Item
Magma Gourmet Steak-O-Meter
Magma
LED Grill Lights
▪▪6 Individual high-intensity LED light bulbs
▪▪Easy use push button on-off switch
▪▪High temperature silicone cover protect
against smoke, heat and water
▪▪Uses 9 volt battery (included)
▪▪Attaches to any Magma hinged lid grill
Lid light
▪▪Attaches to any Magma telescoping grill tool
Tool light
Jet Black
W
* Request Item
MGP A10-287JB
E
MGP A10-276*4/pkg
▪▪100% quilted heat resistant cotton
▪▪Silicone palm/thumb with magma “M”
logo for added heat protection
▪▪Embroidered Magma logo
▪▪Design allows for use with either hand
▪▪Convenient hanging loop
▪▪Sold by the each
N
▪▪4 individual steak thermometers are constructed of
100% 304 marine grade stainless steel
▪▪Exterior silicone coating keeps them cooler to the touch
▪▪Each individual thermometer has an easy to read dial to
indicate the exact level of doneness
Magma Grilling Mitt
W
MGP A10-275
* Request Items
MGP A10-280JB* Jet Black
MGP A10-280MR* Magma Red
E
▪▪100% 304 Marine grade stainless steel
▪▪Large easy to view 2” face with °F and °C Scales
and red temperature indicator
▪▪Set the indicator to a desired temperature and when
the needle reaches this point, cooking is complete
MGP A10-144*
▪▪Two convenient deep pockets
▪▪Towel loop for keeping towel handy
▪▪Fully adjustable neck and waist bands
▪▪Washer and dryer safe
▪▪Protects clothing from spills and splatters
* Request Items
Magma Gourmet Meat Thermometer
MGP A10-141*
Magma
Embroidered Gourmet Grilling Apron
N
Appliances / Sanitation
Magma
5 Piece Telescoping Grill Tools & Storage Case Set
Magma
Cockpit Umbrellas
▪▪New larger, stronger square design
▪▪Fade resistant UV protected acrylic nylon
▪▪Entire canopy reinforced to each corner
▪▪Tie-down point with polyester webbing
▪▪Venting mesh windproof design
▪▪Four corner tie-down attachment points
▪▪2-Piece fiberglass shaft with chrome brass joint
▪▪Quick release all-angle round rail mount,
▪▪Easily adjusts to any position
▪▪Matching storage case included
MGP B10-404
MGP B10-405
Jet Black
MGP 10-481
Clamp assembly
Parts:
Pacific Blue
Reflective Silver Umbrella
▪▪All the features of the above but with
a 100% UV block protective silver
coating on the acrylic nylon canopy.
MGP B10-403Silver
119
Magma
Magma LPG Low Pressure Gas Grill Connection Kit
Used in conjunction with the correct Type 3 control valve
(see below), this kit allows you to connect
your Magma gas grill into your on-board,
preregulated, low pressure LPG (propane)
system. Includes all necessary brass fittings,
safety shutoff valve and 10 feet (3 m) of
preassembled, leak tested hose.
Type 3
Magma LPG Control Valves
For preregulated, low pressure, on-board LPG (propane) systems. These
stainless steel and brass control valves are designed to connect to the low
pressure side of the regulator. Hose and fittings not included.
MGP A10-225
NOTE:
Magma Gourmet & Connoisseur Parts
TrailMate
A10-801
Replacement Parts
Valve/Regulator for Canisters
Type 1
Grill
ChefsMate
A10-803
Newport
A10-918L / LS
Catalina
A10-1218L
Monterey
A10-1225L
MGP 10-262
MGP 10-263
MGP 10-263
MGP 10-264
MGP 10-265*
MGP 10-955 x 2
MGP 10-955 x 3
MGP 10-954 x 3
MGP 10-1254 x 3
MGP 10-1254 x 4
-
-
MGP 10-960
MGP 10-960
MGP 10-960
Grease Pan
MGP 10-924
MGP 10-961
MGP 10-961
MGP 10-961
MGP 10-961
Radiant Plate
MGP 10-923
MGP 10-964*
MGP 10-965
MGP 10-965
MGP 10-1065
Pizo Igniter
MGP 10-956C
MGP 10-956L
MGP 10-956R
Anti-Flare Plate
(Centre, Left & Right)
MGP 10-927
MGP 10-957
MGP 10-957
MGP 10-957
MGP 10-1057
Thermometer
-
-
MGP 10-1270
MGP 10-1270
MGP 10-1270
Warming Rack
-
-
-
MGP 10-1271*
MGP 10-1071*
Low Pressure Valve for LPG Bottles Type 3
MGP A10-220
MGP A10-220
MGP A10-223
MGP A10-224
LPG 10' Hose Conversion Kit for above item. Type 3
MGP A10-225
MGP A10-225
MGP A10-225
MGP A10-225
Burner
Accessories
* Request Items
Magma Kettle Parts
Replacement Parts
Marine Kettle (Original)
A10-207
Marine Kettle (Party)
A10-217
Valve/Regulator for Canisters Type 1
MGP 10-263
MGP 10-263
Grill
MGP 10-253
MGP 10-453*
Pizo Igniter
MGP 10-960
MGP 10-960
Grease Pan
MGP 10-161
MGP 10-161
Radiant Plate & Dome
MGP 10-765
MGP 10-665
Venturi Tube
MGP 10-160
MGP 10-160
Burner
MGP 10-657
MGP 10-657
Low Pressure Valve for LPG Bottles Type 3
MGP A10-220
MGP A10-220
LPG 10' Hose Conversion Kit for above item. Type
3
MGP A10-225
MGP A10-225
Accessories
Parts:
MGP 10-466
Radiant plate assembly for A10-105/205
Type 1
Appliances / Sanitation
Magma discourages the use of high pressure propane lines on board boats.
They recommend only pre-regulated, low-pressure, propane lines properly
installed to American Boat and Yacht Council (ABYC) safety standards. High
pressure propane hoses should be limited to "on-shore" applications.
120
Nova Kool
Top of the line, Canadian made refrigerators that are powered by DC or AC/DC. They utilize a DC
compressor that is constructed with a traditional crankshaft, connecting rod, and piston driven by a
brushless DC electric motor. The compressor automatically shuts down in low voltage conditions. If
using an AC/DC unit, it automatically switches to AC when AC power is available. The interior lining
is made of impact resistant polystyrene plastic with solid fill urethane insulation. Designed for marine use, they can operate at a constant
angle of up to 30 degrees. The quiet DC compressor will not interfere with other equipment, when operated solely on DC voltage.
*See crossover information on page 123 if you are replacing a fridge or freezer*
Appliances / Sanitation
Nova Kool Single Door Refrigerators
These units have a large interior volume with a small cut out dimension. Large reversible doors, with magnetic gaskets for a
positive seal. All stainless steel hinges. Construction is rugged 18 gauge epoxy coated satin coat steel frame with a galvanized steel
outer cabinet shell. Thermostat controlled for a wide range of settings. The removable door panel can be replaced to match differing
interiors. Standard freezer compartments with doors and ice tray, except the R2600. Amp draw is 2.4 amp 12VDC.
Volume
(cu.ft.)
Cut-Out
(H x W x D)
Flange
Panel max.
Weight
12/24 VDC
12/24 & 100/240 50/60 Hz
1.9
20-5/8” x 15-5/8” x 17-3/4”
21-3/8” x 16-3/8”
19-3/4" x 14-7/8”
40 lbs
12/24 VDC
2.1
28-3/8” x 16-3/4” x 14”
29-1/4” x 17-3/4”
28" x 16-9/16"
45 lbs
12/24 VDC
12/24 & 100/240 50/60 Hz
2.4
20-1/4" x 18" x 19-1/2"
21" x 18-3/4”
20-3/16” x 17-5/16”
39 lbs
12/24 VDC
2.5
24-5/8" x 19-1/4" x 15-1/2"
25-1/2" x 20-3/16"
24" x 19"
45 lbs
NOV R3800DC
NOV R3800ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
3.5
28-3/8” x 20-1/4” x 18”
29-1/4” x 21”
28” x 19-5/8”
54 lbs
NOV R4500DC
NOV R4500ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
4.3
28-3/8” x 20-1/4” x 21”
29-1/4” x 21”
28” x 19-5/8”
59 lbs
NOV R5810DC
NOV R5810ACDC
12/24 VDC
12/24 & 100/240 50/60 Hz
5.8
31-7/8" x 23-1/8" x 23-3/4"
33-1/8" x 24-1/2"
29-5/8" x 21-3/8"
69 lbs
Part #
Volts
NOV R1900DC
NOV R1900ACDC
NOV R-2300DC
NOV R2600DC
NOV R2600ACDC
NOV R-3000DC
† All regularly stocked fridges & freezers have hinges on the RIGHT side
R1900
R2300
R2600
R3800/R4500
R5810
Nova Kool Parts:
NOV LATCH75
NOV THERMOSTAT
NOV 101N0500
NOV 101N0210
NOV 101N0500
NOV FAN
Nova Kool Flange Kits
Moulded plastic latch & strike
Thermostat no box
Electronic control module AC/DC
Electronic 2000 Module DC only
Electronic 2000 Module AC/DC
12V fan
Flange kit for the R3800 and R4500 provides
a way of converting these units to fit directly
into the existing cabinets of an older cut out
of 32-7/8" H x 22" W without expensive and
time consuming modifications.
NOV FRAMEKIT-704
121
Nova Kool
Nova Kool Two Door Refrigerators
All the same features as the single door units. Low draw fan and interior light come standard with these units.
The RFU8220 and RFU9000 are front venting and require no additional ventilation.
*See crossover information on page 123 if you are replacing a fridge or freezer*
Part #
Volts
Amps
Interior/Freezer
(cu.ft.)
Cut-Out
(H x W x D)
Flange
Panel 1
Panel 2
Wt**
Under Counter Refrigerators
NOV RFS7501DC*
NOV RFS7501ACDC*
12/24 VDC
12/24DC/110AC
4.4
7.5 / 2.0
34” x 28” x 22”
35” x 29”
33-3/4” x 17-7/8”
33-3/4” x 9-5/16”
86 lbs
NOV RFU8220DC*
NOV RFU8220ACDC
12/24 VDC
12/24DC/110AC
5.2
7.3 / 1.6
52-7/8” x 23-1/4” x 19-1/2”
53-3/8” x 24-5/16”
29-5/8” x 21-3/8”
13-1/4” x 21-3/8”
95 lbs
NOV RFU9000DC
NOV RFU9000ACDC
12/24 VDC
12/24DC/110AC
5.2
9.1 / 2.5
52-7/8” x 23-1/4” x 22-3/4”
53-3/8” x 24-5/16”
13-1/4" x 21-3/8"
29-5/8" x 21-3/8"
100 lbs
*Request Items
RFS7501
RFU8220/RFU9000
W
Nova Kool
Top Load Refrigerator/Freezers
D
▪▪Positive latch system
L
▪▪Reversible door swing
▪▪Replaceable door panels for a custom finish to your interior
▪▪Environmentally sound 134a refrigerant
▪▪CFC free urethane foam in cabinet and doors
▪▪Magnetic door gaskets for positive seal
▪▪Stainless fasteners & hinges used throughout
▪▪Low battery protection to help prevent full discharge of batteries
▪▪Low amperage fan
▪▪Volume: 2.5 cu. ft.
▪▪Flange: 21” x 18-3/4”
▪▪Panel max: 20-3/16” x 17-5/16”
▪▪Weight: 58 lbs
▪▪AC/DC or 12/24 VDC & 100-240 VAC 50/60HZ
NOV TL2500 DC*
NOV TL2500 ACDC*
* Request Item
Cutout: D: 27” x L: 20-1/4” x W: 18”
Cutout: D: 19” x L: 20-1/4” x W: 18”
Nova Kool Refrigerator
(Replaces Common Ice Maker Cut-outs)
The R1200 unit will hold wine bottles as well as
cans of beverage. The 1200 does not have a freezer
compartment; this allows more room for beverages.
▪▪Capacity: 1.3 cu ft.
▪▪Cut out: H: 24.75” x W: 14” x D: 14.5” to 16”
▪▪Frame: H: 25.5” x W: 15.125”
▪▪Weight: 37 lbs
▪▪Optional dual 110/220 AC
Note: The mounting flange can be moved to allow for
shallow cut outs or left as a flush door.
NOV R-1200DC*
12-24 DC
NOV R-1200ACDC 12-24 AC/DC
* Request Item
Appliances / Sanitation
Upright Refrigerators
122
Nova Kool
Appliances / Sanitation
Nova Kool Refrigeration Systems
LT-201-F1
The simple, reliable and efficient means to convert an icebox
into a refrigerator or even a freezer. It's a system engineered
of components designed specifically for marine application.
Three parts make up the system, a compressor assembly, a
freezer unit, and a thermostat. The 12 volt compressor draws a
very low amperage. The average draw is only 1.5 to 2.5 amps
per hour in an adequately insulated box. The freezer unit is
exactly like the freezer compartment in your household fridge,
except smaller. The unit cools the entire box as well as provides
a freezer. Anywhere from a 1 - 8 cubic foot icebox can be
accommodated, equipping it to be a refrigerator, a full freezer
or a combination refrigerator/freezer.
Model #
Description
LT-201-FL
LT-201-F
LT-201-RT6
LT-201
Plates (L x W x D)
Capacity (Fridge / Freezer)
Weight (lbs)
NOV LT-201-F1
1 plate / compressor
16" x 10"
4 / 2.5 (cu. ft.)
24
NOV LT-201-F
3 plate / compressor
16" x 10" x (2" to 18")
12 / 8 (cu. ft.)
26
NOV LT-201-FL
1 plate / compressor
36" x 15" (can be bent for install)
14 / 8 (cu. ft.)
26
NOV LT-201-RT4
Compressor, ‘Freezer Box’
10.5” x 12.5” x 6.5”
12 / .5 (cu.ft.)
28
NOV LT-201-RT6
Compressor, 'Freezer Box'
14" x 6-3/4" x 11"
12 / .54 (cu. ft.)
28
LT-201 Specifications
12-24 VDC
Variable speed compressor
Low battery protection
Compressor runs on a 30° angle
Over sized air cooled condenser for easy
installation in all high ambient temperatures
L: 11" x W: 9" x D: 7-1/2"
Refrigeration Is About Balance
The LT201 unit comes with the ability to change the speed of the
compressor and increase or decrease the capacity to match the
size of your cooler or freezer. By adding or removing one of the
two resistors (red high speed black medium speed, no resistor
slow speed) you can change the speed of the compressor from
2000 rpm to 3800 rpm. When running on slow speed (2000 rpm)
you will draw approximately 2.4 amps @ 12 VDC, and 1.2 amps
@ 24 VDC. Medium speed will draw approximately 4.4 amps
and High speed approximately 6.0 amps. We recommend you
try your unit on low speed (no resistor) and if it cycles on and
off at the temperature you are looking for leave it set at low.
refrigeration is more efficient if you run longer at a low amperage
setting, than if you run shorter at a high amperage setting.
30-7/8
30-3/8
20-1/2
30-7/8
20-1/2
52-7/8
30-7/8
30-7/8
30-7/8
52-1/2
52-7/8
32-7/8
51-7/8
51-7/8
2.8
2.8
1.6
3.1
1.9
6.3
2.8
3.1
3.1
6.3
6.3
3.2
6.2
6.2
DE400
DE440
DE441
DE451
DE461
DE490
DE540
DE541
DE560
DE561
DE704
DE728
DE828
21
25-1/2
29
29
29
20-1/2
16
26
25-1/2
9 3/4
2.3
2.8
3.8
3.9
3.9
1.6
1.3
1.4
3.5
1
CR-1065
CR-1080
CR-1110
RSD-0115E
RSF-0115E
RPF-50SS
CB-036
CB-040
CB-110
CD-30
W
17
19
13-1/4
16
17-1/2
20-1/2
20-1/2
20-1/2
19
18
15
23-15/16
23-15/16
22-21
23-1/4
23-1/8
23-7/8
23-1/8
20-1/2
23-1/4
18-1/2
23-1/4
15-1/4
20-1/2
20-1/2
18-1/2
17-3/4
23-1/4
18-1/2
23-1/4
15-1/4
15-1/4
17-3/4
15
18-1/2
D
28-3/4
31-3/4
19-3/4
23
21
22
22
21-1/2
19
19-1/2
17-3/4
23
23
7/8
23-3/4
23-1/4
23-1/4
23-1/4
20-1/8
23 3/4
21
23-1/2
17-3/4
20-3/4
20-1/8
21
20-3/8
24-3/4
21
23-1/2
17-3/4
17-3/4
20-3/8
18
21
MODEL
N/A
TL2500*
N/A
N/A
F1900*
F3800*
R4500*
R4500*
R3100
R2600*
R1900*
NOVAKOOL
RFU9000*
RFU9000*
R4500 & FRAME704
RFU9000*
RFU9000*
R5810*
R5810*
R4500 *
RFU9000 *
R2600*
R5810*
R1900*
R4500*
R4500*
R2600*
R2600*
RFU9000*
R2600*
R5810*
R1900*
R1900*
R2600*
R1900*
R2600*
H
2.5
1.9
3.5
4.3
4.3
3
2.4
1.9
9.1
20-1/4
20-5/8
28-3/8
28-3/8
28-3/8
28-3/8
20-1/4
20-1/2
52-7/8
52-7/8
28-3/8
4.3
9.1
52-7/8
52-7/8
31-3/4
31-3/4
28-3/8
52-7/8
20-1/4
31-3/4
20-5/8
28-3/8
28-3/8
20-1/4
20-1/4
52-7/8
20-1/4
31-3/4
20-5/8
20-5/8
20-1/4
20-5/8
20-1/4
9.1
9.1
5.8
5.8
4.3
9.1
2.4
5.8
1.9
4.3
4.3
2.4
2.4
9.1
2.4
5.8
1.9
1.9
2.4
1.9
2.4
VOL
W
18
15-5/8
20-1/4
20-1/4
20-1/4
16-3/4
18
15-5/8
23-1/4
23-1/4
20-1/4
23-1/4
23-1/4
23-1/8
23-1/8
20-1/4
23-1/4
18
23-1/8
15-5/8
20-1/4
20-1/4
18
18
23-1/4
18
23-1/8
15-5/8
15-5/8
18
15-5/8
18
D
18-3/4
17-3/4
18
21
21
18-1/2
19-1/2
17-3/4
22-3/4
22-3/4
21
22-3/4
22-3/4
23-3/4
23-3/4
21
22-3/4
19-1/2
23-3/4
17-3/4
21
21
19-1/2
19-1/2
22-3/4
19-1/2
23-3/4
17-3/4
17-3/4
19-1/2
17-3/4
19-1/2
* CHOOSE VOLTAGE OPTION DC ONLY OR AC/DC
RFU8220 AND RFU9000 BOTH HAVE EASILY REMOVED MOUNTING FLANGES THAT REDUCE DEPTH BY 3/4" TO GET THRU TIGHT SPOTS
RFU8220 IS IDEAL FOR APPLICATIONS WHERE CLEARANCE THRU DO0RWAYS ETC IS LIMITED TO GET UNIT INTO BOAT
RFU8320 IS IDEAL FOR APPLICATIONS WHERE CUT OUT HEIGHT CANNOT BE INCREASED TO 52 7/8" FROM ORIGINAL 51 7/8 (DE828/728)
FRAME704 WHEN USED IN CONJUNCTION WITH R4500 OR R3800 TO REPLACE THE DE704
21
1.7
CR-1050
WAECO/DOMETIC
20-1/2
1.9
DE390
2.7
DE0051
DE351
20-1/2
3.6
DE0041
20-1/4
30-7/8
1.7
DE0040
52-7/8
20-1/2
1.7
DC340
7
20-1/2
1.9
DC254
1.9
20-1/4
1.7
DC230
DE251
20
2.7
DE0061
H
20-1/2
VOL
MODEL
DC0051
NOVAKOOL
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
OR
NK55
R3800*
R3800*
R1600*
RFU8220*
RFU8220*
R5810*
RFU8220*
RFU8220*
R4500*
R4500*
R3800*
RFU8220*
R4500*
R1600
R3800*
R3800*
RFU8220*
R4500*
R1600
R1600
R1600
MODEL
1.94
3.5
3.5
1.4
7.3
7.3
5.8
7.3
7.3
4.3
4.3
3.5
7.3
4.3
1.3
3.5
3.5
7.3
4.3
1.3
1.3
1.3
VOL
Fridge
24
28-3/8
28-3/8
20-1/2
52-7/8
52-7/8
31-3/4
52-7/8
52-7/8
28-3/8
28-3/8
28-3/8
52-7/8
28-3/8
20-5/8
28-3/8
28-3/8
52-7/8
28-3/8
20-5/8
20-5/8
20-5/8
H
26
20-1/4
20-1/4
15-5/8
23-1/4
23-1/4
23-1/8
23-1/4
23-1/4
20-1/4
20-1/4
20-1/4
23-1/4
20-1/4
15-5/8
20-1/4
20-1/4
23-1/4
20-1/4
15-5/8
15-5/8
15-5/8
W
Freezer
19
18
18
13-3/4
19-1/2
19-1/2
23-3/4
19-1/2
19-1/2
21
21
18
19-1/2
21
13-3/4
18
18
19-1/2
21
13-3/4
13-3/4
13-3/4
D
VOL
7.3
7.3
Fridge/Freezer
RFU8320
RFU8320*
MODEL#
23-1/4
23-1/4
45-1/2
45-1/2
Top Loading
W
H
Appliances / Sanitation
NORCOLD
Drawer
21-3/4
21-3/4
D
Nova Kool
123
Norcold/Waeco/Dometic Crossover Chart
124
Seaward
Seaward
Single Burner Electric Gourmet Stove
Appliances / Sanitation
Seaward
Drop-In Propane Stove
Low profile counter top two burner
stove is designed for maximum
cook top area in minimal galley
space. 100% safety controls automatic shut-off thermal couple valves shut off fuel in case
flame blows out. Burners controlled by infinite adjustable valves.
Automatic ignition. Porcelain enamel burner grates and burner caps.
▪▪Black glass top
▪▪Overall W: 21” x D: 12” x H: 2-7/8”
▪▪Cut-Out W: 20-3/8” x D: 11-3/8” x H: 2-7/8”
SWD 2276-1000
Seaward Pot Holders
93527
Set of two stainless steel pot holders for ranges.
SWD 93527Standard
SWD 93277
Euro style
Seaward
Three Burner Electric Stove
▪▪Bevelled edge
▪▪Drop-in, frameless, flush mount Ceran
glass with black graphics
▪▪120V, three 1,200 watt radiant elements
▪▪Limiters in burners prevent overheating
▪▪UL 858 or CE Certified
▪▪Overall: 22" W x 20" D x 2-7/8" H
▪▪Cutout: 21-3/8" W x 19-3/8" D x 2-7/8" H
SWD 3247-5100
Seaward
Two Burner Electric Stove
▪▪Drop-in, flush mount Ceran glass.
Two 1000 watt radiant elements
▪▪Limiters in burners to prevent
overheating
▪▪UL 858 or CE Certified
▪▪Overall size: 22W x 13D x 3"
▪▪Cut-out: 21-3/8 x 12-3/8D x 3"
SWD 2247-5100
SWD 2247-5200*
* Request Item
120 Volt
240 Volt
Seaward Two Burner Electric
Gourmet Stove
▪▪Drop-in, flush mount unit with a Ceran
glass top and graphics
▪▪120V, two 1,200 watt radiant elements
▪▪Built in limiters to prevent overheating
▪▪Overall: 22" W x 13" D x 3" H
▪▪Cutout: 21-3/8" W x 12-3/8" D x 3" H
SWD G2247-5100
▪▪Drop-in, flush mount unit with a Ceran glass top
and graphics
▪▪120V, 1,200 watt radiant element
▪▪Built in limiters to prevent overheating
▪▪Overall: 13" W x 13" D x 3" H
▪▪Cutout: 12-3/8" W x 12-3/8" D x 3" H
SWD 1247-5100*
* Request Item
Seaward
Welded Aluminum Propane Tanks
All tanks DOT approved.
▪▪Brass valve
▪▪Will never rust out
93131-M
*Re-certification dates for all
aluminum tanks is 12 years*
Part #
lbs
Volume
Dimensions
10
2.5 gal
Dia: 11" x H: 17"
Horizontal
10
2.5 gal
Dia: 11" x H: 17"
SWD 93136-M*
Vertical
20
5 gal
Dia: 13" x H: 21"
SWD 93138-M*
Horizontal
20
5 gal
Dia: 13" x L: 21"
SWD 93131-M
Vertical
SWD 93137-M*
* Request Items
Seaward
Compact Propane Locker
A completely self contained propane system.
Rotational molded polyethylene construction.
Sealed lid with molded inserts holds tank
secure even in the roughest sea conditions.
Vent port allows overboard venting. Hold down
brackets for easy installation. Quick release
lid top facilitates access to tank, regulator, and
leak test gauge. System includes: one gallon
tank, regulator, leak test gauge, vent kit and
solenoid.
▪▪10 lb locker kit with aluminium tank & solenoid
▪▪W: 16-1/2” x D: 13-1/2” x H: 18-1/2”
SWD 93271
Seaward LPG Propane Panel
LPG on/off panel for solenoid control of
LP tanks
▪▪5 amp reset fuse
▪▪On indicator light
▪▪Width: 4-1/2”, Height: 3-1/4”
SWD 93156
Seaward Regulator Kit
Regulator kit contains:
-1 x LPG spud (75373)
-1 x Tee (70190)
-1 x Pressure guage (70191)
-1 x 3/8” pipe to 3/8” flare fitting (70192)
-1 x LPG regulator (73509)
SWD 93141
Seaward
125
Seaward 12 Volt Water Heater
An economical, combination electric/engine
heat exchanger, water heater. Heats water
quickly from the 120 volt-1500 watt, 13”
electric element while on A.C. power or
from the heat exchanger from the engine’s
cooling system while under way. Hold down
brackets are welded directly to the aluminum
tanks. Comes complete with a temperature pressure relief valve,
temperature & pressure drain tube and are ignition protected.
Seaward tanks carry an extended 1 year limited warranty on all parts
and on tanks against leaks due to rust and corrosion.
▪▪Domestic water ports: 1/2” IPT
▪▪Heat exchanger: 5/8” hose barbs
▪▪Re-settable 190° high limit switch
▪▪Exterior choices are marine galvanized steel, white powder coated
aluminum or stainless steel
▪▪UL & CE approved
▪▪Rear exchangers have the 5/8” engine fittings on the back side
An electric only 12 V water heater is ideal for
outboards. The neat design of the water heater
means it can fit in compact spaces and electric
only means installation is no longer tied to the
engine room.
The water heater has a rapid heat up time with
hot water in less than an hour and is highly
efficient with heat retention of up to 10 hours.
▪▪12V power supply - No generator / inverter/ shore power required
▪▪Ideal for use with deck showers
▪▪Low current switching
▪▪Integrated temperature and pressure valve
▪▪Thermal cut-out
▪▪Heating Indication output
▪▪Ignition protected (ABYC E-11)
▪▪Compact design - Fits in small places
▪▪H: 35 x W: 33 x D: 26.6 cm
▪▪Weight: 6.8 kg
Gal
WxDxH
Material
SWD S300W
Side
3
13” x 9” x 13”
Powder coated White
SWD S600
Rear
6
13” x 19” x 13”
Galvanized steel
SWD S600W
Rear
6
13” x 19” x 13”
Powder coated white
SWD F600
Front
6
13” x 19” x 13”
Galvanized steel
SWD F600W
Front
6
13” x 19” x 13”
Powder coated White
SWD F700
Front
6
13” x 19” x 13”
Stainless steel
SWD S700
Rear
6
13" x 19" x 13"
Stainless steel
SWD S1100
Rear
11
16" x 22" x 16"
Galvanized steel
SWD F1100
Front
11
16” x 22” x 16”
Galvanized steel
SWD F1200
Front
11
16” x 22” x 16”
Stainless steel
SWD S1200*
Rear
11
16” x 22” x 16”
Stainless steel
SWD S1900
Rear
18
20-1/4” x 20-1/4”
Stainless steel
* Request Item
Spare Parts:
SWD 73127
SWD 73129
SWD 74032
SWD 74031
SWD 74563
Water tank pressure relief valve
Water heater thermostat
240V-1500W heating element
Heating element 120 volts
High limit switch 120 volts
* Request Item
Appliances / Sanitation
Heat
Exchanger
W
E
SWD S360EW*
Part #
N
Seaward Water Heaters
126
VacuFlush
VacuFlush 4800 Designer Series
Appliances / Sanitation
VacuFlush 5000 Series - Full Size Comfort
Large household size bowl with shallow front-to-back footprint
delivers installation ease and user comfort for all boat sizes.
▪▪1 pint per flush
▪▪Foot-pedal flush
▪▪Standard, medium and low-profile heights
▪▪Above & below floor discharge options
*The outlet direction is taken when facing the toilet*
Luxurious comfort in a compact fixture - featuring electronic
remote switching, elongated seat and “plug-in base”.
▪▪All-ceramic construction
▪▪Automatic flushing cycle
▪▪Very low water consumption (1.5 pints/.7 litre per flush)
▪▪Optional wall mounted push-button
operation
▪▪Full-size seat with elongated opening
▪▪New flush mechanism reduces noise
▪▪Through or above the floor discharge
148481 / 148091
5006 Models
VAC 148481*
▪▪Low Profile design
▪▪Discharge through floor, hose or pipe
▪▪Seat height: 12-3/8" x W: 17-1/4" x D: 18-3/8"
VAC 148061*
VAC 148091*
VAC 500601White
VAC 500603*Bone
5009, 5047, 5048 Models
▪▪Standard height
▪▪Discharge through floor, hose or pipe
▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8"
VAC 500901White
VAC 500903*Bone
5047 Models
▪▪Standard height
▪▪Discharge above the floor at right of base
▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8"
VAC 504701White
VAC 504703*Bone
5147, 5148
Options:
Model 4848, White, standard height, above or through the floor discharge, D: 18-5/8" x W: 14-3/4"
Model 4806, White, low profile, through the floor discharge, D: x 16-1/4" x W: 14-3/4"
Model 4809, White, standard height, through the floor discharge, D: 18-5/8" x 14-3/4"
VAC 408010* Electronic backlit flush panel w/service mode
* Request Items
VacuFlush 4700 Designer Series
Same features as the 4800 Series above with
deluxe styling and flat back design.
▪▪Elongated opening wooden seat
▪▪Service switch is easy to access
▪▪Through the floor discharge outlet is 1.5"
▪▪Excellent fixture for larger yachts & houseboats
VAC 472251*
VAC 472281*
* Request Items
12 volt
24 volt
5048 Model
VacuFlush 140 Series For Smaller Boats
▪▪Standard height
▪▪Discharge above the floor at rear of base
▪▪Seat height: 16-1/2" x W: 14-7/8" x D: 18-3/8"
▪▪1 pint flush
▪▪Above-the-floor discharge
▪▪Foot pedal flush
▪▪Pedal lock for tank pump out
▪▪White
VAC 504801White
5147 Models
Right side discharge
▪▪Medium height
▪▪Discharge above the floor at right of base
▪▪Seat height: 15" x W: 14-7/8" x D: 18-3/8"
VAC 014701
VAC 514701White
VAC 514703*Bone
Rear discharge
VAC 014801
Left side discharge
VAC 014901
5148 Model
▪▪Medium height
▪▪Discharge above the floor at rear of base
▪▪Seat height: 15" x W: 14-7/8" x D: 18-3/8"
VAC 514801White
* Request Items
VacuFlush is only sold by
Factory Authorized Installing Dealers
VacuFlush
VacuFlush J-Series Vacuum Generators
SeaLand/VacuFlush Parts
Installation Flexibility - Pump body and plumbing fittings easily
rotate to accommodate diverse plumbing layouts. Inlet and outlet
fittings are interchangeable.
SLD 230980
SLD 236096
SLD 230335
SLD 238685
SLD 310048
SLD 310076
SLD 310151
SLD 310228
▪▪Pump Flow - Large 2" (51mm) ID
duckbill valves improve flow through
pump
▪▪Dimensions: 20-1/8" x 9-1/8" x 14"
VAC 78001212V
VAC 780024*24V
SLD 311208
VAC 311216
Duck bills 2/pkg
Vacuum switch
VacuFlush Low Profile Vacuum Generator
Only 8" inches high allows this vacuum generator to be installed in
shallow spaces. Vacuum tank and pump can be mounted separately.
▪▪Clears bowl instantly
▪▪4-6 amp. draw per flush
VAC 77001212V
Parts:
VAC 311436
Vacuum switch
VacuFlush Vacuum Tank
SeaLand's vacuum tank is the nerve centre of the system. Made of
heavy duty PVC, it can be mounted up to 20 feet from the toilet
on the deck or bulkhead. It stores the vacuum required to flush the
toilet and work the system. A differential switch is located in the
tank that monitors the vacuum. When
a drop in vacuum is sensed, it signals
the pump to activate. If more than one
toilet is installed in a system, each of the
toilets must have a tank. Inlet and outlet
connectors: 1-1/2" hose barb.
▪▪H: 11-1/2” x L: 24-1/2” x W:9-1/2”
VAC 729100
Complete tank
VAC 318032
Vacuum switch for vacuum tank
Parts:
VacuFlush S-Series Vacuum Pumps
The S-Series vacuum pump is an electric,
straight through, bellows type pump. It is
manufactured of long lasting polypropylene,
draws 2 to 6 amps at 12V. It can be mounted
up to 20' away from the vacuum tank but
must be mounted right side up. The bellows
style allows it to be run dry without damage.
▪▪Weight: 8 lbs.
▪▪Inlet and outlet connections: 1-1/2" hose barb
Part #
VAC 201200
VAC 202400
Breaker/Fuse
12V, 12-14 ga - 10A
24V, 14-16 ga - 5A
SLD 310902
SLD 310076
Pump repair kit, “O”-ring, bushing & shaft
Duck bill kit for “S & T” pumps 2/pkg
Parts:
Volts
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
SLD
Bellows kit for "S & T" pumps
Spring cartridge for toilets w/metal bracket
Vacuum breaker assembly
Holding tank cleanout kit
Ring & Half clamp kit
Duck bill kit for "S & T" pumps 2/pkg
"O" ring replacement for "S and T" pump 2/pkg
Water valve, seal kit, 4 duckbill valves, tester
& manual
311580 24V relay
311641 Water valve kit 310 model
310683 Spring cartridge-Ecovac
311462 Teflon & rubber vacuflush seal kit
314349 Water valve kit
316906 Vacuum breaker for "800" series
318065 Vacuum breaker for "500" series
319039 'O' ring-old style S/T pump
318162 Ball shaft and cartridge kit
319054 Vacuum breaker w/ hand spray
300011 Inline check valve
310063 Floor flange seal kit
310064 Mounting kit (315057)
310682 Ecovac flush pedal/cart.White
310954Halfball/shaft/cartridg-ecovac
311384 In-line check valve kit
311581 2” Duckbill valve (4/pkg
311822 “M’ pump diaphram
343829 Seat & cover white
344436 Seat & cover white
VAC 310540 Switch kit VG3
VAC 311423 Whisper motor kit 12V
VacuFlush Status Panel
Providing protection for the vacuum pump, this
attractively styled panel allows the owner to shut
the system down during the night. It continuously
monitors the status of the vacuum to ensure trouble
free operation, and indicates loss of electrical
power or system power off. 10 amp. circuit breaker.
▪▪3.25" x 3.25"
VAC 53001212V
VacuFlush is only sold by
Factory Authorized Installing Dealers.
Appliances / Sanitation
Parts:
127
128
VacuFlush
VacuFlush
SailVac 5200 Vacuum Holding Tank
VacuFlush Vacuum Holding Tank Systems
140 & 5100 Series Only
Includes Pedal Lock that holds flush valve
open during pump-out to completely discharge
holding tank. Small footprint fits anywhere.
Appliances / Sanitation
This totally integrated VacuFlush toilet/
vacuum holding tank system is the perfect
answer - holding as many flushes as a
standard 30-gallon tank when used with a
typical marine toilet.
▪▪“3/4 Full” & “Full” tank probes & indicator panel
▪▪Automatic “Full” shutdown prevents tank overfill
Requirements:
▪▪Toilets with pedal lock
▪▪Water Supply: Line/Fitting: .5" MPT
▪▪Flow: 2 gpm at toilet
▪▪Discharge: 1.5" ID hose connected to VHT 4500 model
Specifications:
▪▪Waste Capacity: 9.0 gallons (34 l)
▪▪Weight of basic VHT4500: 30 lbs
▪▪W: 12-1/4" x L: 28" x H: 22-1/4"
VAC 704511*
*Request Item
Key Benefits
■
■
■
■
■
■
■
■
■
Compact unit incorporates vacuum pump, vacuum resevoir and holding tank
Vertical curved profile for hull installation
When used with VacuFlush toilet, provides tank capacity for two people for four days
Roto-molded 8mm polyethylene
Interior baffle system protects vacuum components at high angles of heel
Reinforcing ribs prevent tank distortion
Corrosion, leak and odour-proof
“3/4 Full” & “Full” tank probes & indicator panel
Automatic “Full” shutdown prevents tank overfill
Specifications:
▪▪Waste Capacity: 14.0 gallons (53 l)
▪▪5/8" vent hose
▪▪Power draw: 3 amps @12VDC
VAC 705200
HTS system & panel
HTS system w/discharge pump & panel
There are many VacuFlush Holding Tank Systems available.
Please ask for the complete catalogue.
VacuFlush
VacuFlush Holding Tank Systems
with Built-in Vacuum Generators
VacuFlush RushFlush 9300 Toilet System
Virtually any boat from 19 feet in length and longer can feature a
complete VacuFlush toilet system. Many HTS-VG
models include level indicators, vacuum relief valve, vent filter and
discharge pump for added convenience and reliability.
▪▪Tankwatch, TankSaver, 1 outlet
VAC 711012*
10 US gallons
▪▪Tankwatch, TankSaver, 2 outlets, discharge pump & vent filter
28 US gallons
▪▪Tankwatch, TankSaver, 2 outlets, discharge pump & vent filter
VAC 713512*
* Request Items
35 US gallons
Dual High-Velocity Water Jets
With Plug & Play Installation
For offshore vessels that accommodate high-flow toilet systems,
RushFlush™ marine toilet technology delivers unmatched power,
resource efficiency, and ease of installation when compared to
similar toilet systems.
The energetic RushFlush power begins with two hyper-pressurized
water lines that converge at the bowl – through the high-capacity
upper rim for a thorough bowl-clearing rinse every time, and a
simultaneously charged water jet at the bottom of the bowl that
macerates effluent and drives it to the discharge plumbing. This
patent-pending design offers adjustable flush duration programming
to meet individual water efficiency requirements.
RushFlush toilets feature the popular SeaLand all-ceramic fixture
used in thousands of specialty bathroom applications – a full-size,
residential-style toilet with a large, deep bowl and elongated seat
for premium comfort.
▪▪Standard height, thru-floor, White, 12V
VAC 931131*
711012
10-Gallon
*Request Item
712812
28-Gallon
Key Benefits
713512
35-Gallon
There are many VacuFlush
Holding Tank Systems available.
Please ask for the complete catalogue.
■
■
■
■
■
■
■
■
■
Dual high-velocity water jets clear the bowl, macerate waste, and propel effluent to the holding tank
Easy, fast, plug & play toilet installation
Elongated, comfortable seat and deepbowl
Uses electric flush handle or wall switch
Freshwater, odor-free flushing
No mechanical waste-macerating system needed
3/4 full-tank warning indicator option
Full-tank shutdown option prevents overflow
Automatic “Full” shutdown prevents tank overfill
Appliances / Sanitation
VAC 712812*
129
SeaLand
SeaLand
MasterFlush 8100 Series Macerator Toilets
SeaLand
MasterFlush 7100 Series Orbit Toilets
Macerator toilets powered with
MasterFlush technology. The
contemporary shape features a compact
footprint to fit in most any head
compartment.
▪▪Powerful macerator flush
▪▪Small footprint - fits in most any head
compartment
▪▪Standard and low-profile heights
▪▪Through-the-floor or through-the-wall discharge options
▪▪“Normal” or “Rough Sea” flush options
▪▪Comes with switch
▪▪Low profile H: 13-3/4” x W: 14-3/4” x D: 18-3/8”
▪▪Standard H: 17” x W: 14-3/4” x D: 18-3/8”
▪▪Colour: White
▪▪Home-like comfort and size in a basic marine head
▪▪Full 360-degree bowl-to-base rotation allows virtually limitless
positioning to accommodate small spaces
and diverse plumbing layouts
▪▪Large residential-style seat and deep bowl
for premium comfort
▪▪Small footprint to fit in tight spaces
▪▪Fresh water flush models have an integrated
water valve
▪▪Raw water flush models have an
integrated water pump
▪▪Flushes on as little as 1/3-gallon (1.2 l) of fresh water
▪▪Dual-stage impeller/macerator cutting
wheel pulverizes waste for optimum
discharge flow and most thorough
waste tank pump-out
Maximum installation flexibility
▪▪Draws only 20 amps at 12 VDC
▪▪Standard dual-function "add water/flush" switch
▪▪H: 14-3/4" x W: 15" x D: 19"
SLD 81120112V, Low profile
SLD 811601*24V Low profile
SLD 815201*12V, Standard profile
SLD 815601*24V, Standard profile
311702
*Request Items
SeaLand
MasterFlush 8700 Series Macerator Toilets
▪▪Powerful macerator flush
▪▪Integral water trap provides quiet yet effective flushing action
▪▪Wall mounted Touchpad flush panel (optional) or toilet mounted
flush lever
▪▪Through-the-floor or through-the-wall
discharge options
▪▪Wood seat with elongated opening
▪▪Discharge outlet is both 1-1/2” (38mm)
straight and 90° elbow outlets (through floor
or above the floor)
▪▪“Normal” or “Dry Bowl” flush options
▪▪12V or 24V operation
▪▪H: 19” x W: 16-1/2” x D: 22-1/2”
874009
▪▪Colour: White
NOTE The lever flush series does not require a separate switch to
operate and the panel flush series comes with a remote panel.
SLD 874002*
SLD 874009*
12V, lever flush
24V, lever flush
SLD 874301*
SLD 874302*
12V, panel flush
24V, panel flush
*Request Items
SLD 712001
SLD 716001
SLD 726001*
*Request Items
W
E
N
Appliances / Sanitation
130
Fresh water flush, standard bowl
Raw water flush, standard bowl
Raw water flush, compact bowl
▪▪ "Normal flush"
▪▪ Pressure activated toilet flushes as long as
switch is pressed
SeaLand
131
SeaLand SaniPottie Portable Toilets
SLD 096202
SLD 096602
SLD 196406
SLD 196506
2.5 gal, Tan, H: 12" x W: 14-1/2" x D: 16-1/2"
5.0 gal, Tan, H: 15-1/2" x W: 14-1/2" x D: 16-1/2"
2.5 gal, Grey MSD direct discharge
5.0 gal, Grey MSD direct discharge
SLD 310018
SLD 310239
SLD 310572
SLD 310573
SLD 239064
SLD 310031
SLD 310050
SLD 310066
SLD 310067
SLD 310102
SLD 310103
SLD 310104
S/S hold down brackets for 2.8 gal
S/S hold down brackets for 5 gal
Parchment parts kit
Platinum parts kit
Slide valve assembly - white
Cap & seal - White
Cap & seal kit
Latch assembly - white
Latch assembly - tan
Cap kit - tan
Cap kit - platinum
Bellows kit - tan
Parts:
SeaLand SaniPottie 970 Series Portable Toilets
▪▪Pressure flushing action provides powerful
bowl rinsing
▪▪Push-button operation is as convenient as
a household toilet (no pumping after every
flush)
▪▪Material is high-impact ABS with a durable
shiny surface
▪▪Level indicator continuously shows tank
level through last half of the total volume
▪▪Swing-out discharge spout is extra long
▪▪Two automatic lower tank vents greatly reduce possibility of
splashing while emptying
▪▪Manual lower tank vent is easier to use because it does not have to
be continuously held open
▪▪Self-contained freshwater 2.3 gallon tank
▪▪2-tone grey
▪▪MSD models can be installed for direct overboard, dockside
pump-out, or remote tank discharge
SLD 097406
SLD 097506
SLD 197406
SLD 197502
SLD 197506
Parts:
SLD 320005
2.6 gal, H: 12-1/2" x W: 13-1/8" x D: 15-1/4"
5.0 gal, H: 15-1/4" x W: 13-1/8" x D: 15-1/4"
2.6 gal, MSD w/ fittings for direct discharge
5.0 gal, MSD w/ fittings for direct discharge, Tan
5.0 gal, MSD w/ fittings for direct discharge, Gray
Hold down bracket
SeaLand Gravity Discharge Toilets
The gravity discharge toilet is designed to mount over a
3” closet flange in the top of a holding tank. Household size, china
bowl is rinsed from onboard demand water system coupled to the
1/2” MPT fitting on the toilet. It has an integral anti-syphon vacuum
breaker and a single pedal for water level and flushing control.
▪▪White
SLD 510221 Wooden seat, H: 17-1/8" x D: 20-1/2" x W: 15-1/4"
Parts:
SLD 345889 3" threaded floor flange
SLD 345892 3" socket floor flange
SeaLand Traveler Marine
Sanitation System
A complete freshwater system in one self
contained package. Ideal replacement
for re-circulating toilets. China bowl
is rinsed with fresh water from onboard demand system. No electrical
connections. Integral anti-syphon
vacuum breaker protects potable water
supply. Water level and flushing action
controlled by single pedal control.
▪▪Holding tank is molded fibreglass with 9 gallon capacity
▪▪Discharge connection is 1-1/2" hose insert
▪▪Vent connection is for 5/8" hose
▪▪Water connection is 1/2" MPT
▪▪Includes stainless steel mounting bracket and hardware
▪▪Colour: Bone
▪▪H: 19-3/4" x D: 18-3/4" x W: 18-7/8"
SLD 371103
Appliances / Sanitation
Completely self-contained, they operate on
their own 2.6 gallon clean water supply with
no hook up to water or power. Easy access
top mounted water port provides convenient
in-vessel refill.
▪▪High density polyethylene construction,
matte finish
▪▪2.5 or 5.0 gallon freshwater tanks; enough
for about 30 to 60 uses.
▪▪MSD models can be installed for direct overboard, dockside
pump-out, or remote tank discharge
132
SeaLand
SeaLand Holding Tanks
▪▪Leak-proof Design - Top-mounted hose connections eliminate standing liquid in discharge hose
▪▪Odour-free-100% virgin polyethylene resin with heavy walls prevents odour permeation and resists corrosion
▪▪Implosion Protected - TankSaver vacuum relief valve prevents damage from dockside pumps high levels of vacuum
▪▪ISO/USCG Compliant - SeaLand holding tanks fully comply with the ISO 8099:2000(E) standard
SLD 840152
SLD 840201
SLD 840301
15 HTS-Vertical (15 gallon)
20 HTS-Horizontal (18 gallon)
30 HTS-HRZ (28 gallon)
840201
Appliances / Sanitation
840152
SLD 800121*
SLD 800251
SLD 800281*
SLD 800351*
SLD 840121*
SLD 840122*
SLD 840151*
SLD 840202
SLD 840401
12 HTS-HL (11 gallon)
25 HTS-HRZ (25 gallon)
25 HTS-HL (28 gallon)
35 HTS-HL (35 gallon)
12 HTS-HRZ (11 gallon)
12 HTS-VRT (11 gallon)
15 HTS-HRZ (15 gallon)
20 HTS-Vertical (18 gallon)
40 HTS-HRZ (34 gallon)
840301
NOTE
Additional sizes are available.
Ask for a SeaLand Tank catalogue.
*Request Items
800121
800251
800281
840122
800351
840121
840151
840202
840401
133
SeaLand
SeaLand Holding Tank Systems
SeaLand Inlet Elbow With Uniseal
This system combines a level indicator and
relief valve with a holding tank. Also has
integral mounting feet that eliminate the need
for any strapping. Has separate dockside and
overboard connections. The TankSaver relief valve protects the
holding tank from excessive suction by strong dockside pumps and
satisfies pending ISO regulations for 1-1/2" venting. This system
exceeds proposed ISO standards because of it's 95% tank contents
removal performance. Has unmatched durability because of its 3/8"
wall thickness.
▪▪Inlet Elbow with uniseal
▪▪Can also be used as a discharge dip tube by
gluing 1-1/2” PVC pipe into the bottom
▪▪Requires a 3” hole
28 gallon
40 gallon
* Request Items
10 gallon
28 gallon
40 gallon
012812
Pipe Size
Cut Out
SLD 311110
2"
3”
SLD 311111
1-1/2"
2-1/2"
SLD 311164
1/2"
1-1/8"
SeaLand
Noz-All Pump Out Adapters
721012
014012
SeaLand Holding Tank Dip Tube Kit
▪▪Reduces chances of hose failure
▪▪Allows waste to be removed from the top
of the tank
▪▪Eliminates stagnant sewage from sitting in
discharge lines
▪▪Fits tanks up to 30" deep with a 3" hole
required
SLD 310660
SeaLand Tank Saver Relief Valve
▪▪Protects holding tanks from excessive dockside
pump suction
▪▪Easy to install
▪▪Provides excellent odour seal
▪▪Reduces pump out time
▪▪Meets ISO standards for 1-1/2" venting
▪▪Requires 3" opening to install
SLD 255247
This rubber seal allows for an easy installation of a PVC pump
out or inlet pipe into the top of a holding tank.
Part #
All the features as the systems above but also includes
a T-series discharge pump
SLD 721012*
SLD 012812
SLD 014012
SeaLand Uni-Seals
▪▪Makes for easy, clean dockside pump outs
▪▪Made of durable heavy duty nylon
▪▪Provides airtight seal between deck fitting & dockside pump
▪▪Allows pump to prime without waste
▪▪Works with both rubber nozzles and cam operated type suction
hose fitting
Part #
Size
Thread Pitch
Deck Fitting
SLD 343502
SLD 343503
1-1/2"
11.5 TPI
1-7/8"
1-1/4"
16.0 TPI
1-5/8"
SLD 343504
1-1/4"
16.0 TPI
1-5/8"
SeaLand T-Series Discharge Pumps
▪▪Discharge pump designed to pump out holding tanks
▪▪Self-priming to 10 feet
▪▪Handles solids to 1/2" dia. and can be run dry
▪▪Included are 1-1/2" & 1" adapters to permit direct
replacement of other macerator pumps
▪▪Weight: 10 lbs
Part #
VDC
GPH
Amps
Fuse
SLD 301200
12
300
6
10
SLD 302400
24
300
3
5
Parts:
SLD 310902
SLD 310076
Pump repair kit, “O”-ring, bushing & shaft
Duck bill kit for “S & T” pumps 2/pkg
Appliances / Sanitation
SLD 012800
SLD 014000*
SLD 311608
134
SeaLand
N
E
W
SeaLand ECO Holding Tank Vent Filter Kit
▪▪Improved malodorous gas filtration
▪▪Uses 55% less plastic than previous vent filter cartridge
▪▪Earth-friendly, recyclable plastic components
▪▪Fits in the same space and brackets as previous filters
▪▪Fits 5/8”, 3/4” and 1-1/2” hose fittings
▪▪One replacement cartridge fits all SeaLand ECO filter sizes
Appliances / Sanitation
SLD 311001
SeaLand MaxFlex Sanitation Hose
New DTM systems feature an enhanced fourlevel LED indicator for waste, water or gray
water tanks as well as a more compact design as
compared to previous panels.
▪▪Highly reliable micro-float switches
▪▪Easy-to-read panel (includes International
symbology)
▪▪Complete packages include 22" tank probe cap (s),
micro-float switches, lighted indicator panel
▪▪12 or 24 VDC operation
SLD 604001
SLD 604002
SLD 608002*
Single tank, DTM04, with vent
Single tank, DTM04, no vent
Two tank, DTM08, no vent
SLD 000350
SLD 000355
SLD 230930*
SLD 310684*
SLD 230272
22" probe cap, w/vent
22” probe cap, no vent
Flex probe kit 22”
Flex probe kit 45”
3" universal mounting kit
Accessories
Outstanding flexibility maintains full inside diameter even
around tight corners. Clamps easier than other hoses for
airtight connections.
▪▪50 feet per box
▪▪Sold by the foot
SLD 3456505/8”
SLD 3416283/4”
SLD 3411451”
SLD 341116FT1-1/2"
* Request Items
SeaLand Flush Warning Panel
Simple one light warning panel for flush
ready status.
SeaLand Odor-Safe Plus Sani-Hose
SLD 318714*
The best hose on the market.
▪▪50 feet per box
▪▪Sold by the foot
* Request Item
SLD 342871FT1-1/2"
230310
SeaLand Tank Monitors
Top rated by Practical Sailor
230312
SeaLand Tankwatch
No more overfilling your holding tank.
Highly reliable micro float switch
activates a red warning light when tank
is full. No electrical components come
in contact with waste - no messy probes to clean.
Easy to install on any rigid tank material.
▪▪Operates on 12V
▪▪Includes micro float switch, panel and gasket
▪▪Panel: 2" x 3-1/4"
230311
230313
SLD 002311 Complete kit
SLD 230278
Float switch only
Parts:
238798
231104
238802
231425
231161
341513
SeaLand PVC Hose Fittings
These 1-1/2" hose barbs are smooth on the outside which makes
for a better seal between the hose and the fitting, and allow
removal of the hose for servicing the plumbing system. All
fittings require priming and gluing.
SLD 341513
1-1/2" Custom hose adaptor
SLD 231104
45º Street elbow
SLD 231425
Use with hose adaptor or PVC pipe
SLD 231161
PVC 90° street elbow
SLD 230312
Hose adaptor includes 341513
SLD 23031190° sweep elbow includes adaptors
SLD 230310
Hose mender kit
SLD 238802
Tee kit includes adaptors
SLD 230313
Double bend kit includes adaptors
SLD 238798
“Y” kit includes adaptors
135
SeaLand / Viking
▪▪Visible gas level
▪▪Non-corrosive 3 layer composite
▪▪Ergonomic easy carry handles
▪▪36% lighter than steel
▪▪DOT approved
▪▪Pre-purged cyclinder
W
▪▪Made of 100% recycled fibre
▪▪Rapidly disintegrates to help keep
sanitation systems flowing freely
▪▪For use in all portable and permanent toilet
systems
▪▪Four rolls packed in a reusable storage bag
E
Viking Fibreglass Propane Tanks
N
SeaLand Biodegradable Toilet Tissue
SLD 441204
Single ply
SLD 4412052-Ply
▪▪Cleans toilets and controls tank odours
▪▪Rapid dissolving 2 oz packet effervesces in water
▪▪Won't harm plastic bowls or rubber seals
▪▪Nontoxic, nonstaining formula contains 100%
biodegradable granules
▪▪Enzymes break down waste and tissue
▪▪1 packet treats a 40 gallon tank
SLD 711202
56.7 gr, 12/pkg
SeaLand "MAX Control Advanced"
Holding Tank Deodorant
After years of research and development of “ecofriendly” alternatives to tank deodorants that use harsh
chemicals, Dometic announces a breakthrough with
new Max Control Advanced Products. With a powerful
non-formaldehyde formula, Max Control Advanced
provides the same odour control as the current Max
Control (formaldehyde) product
SLD 700029
SLD 700028
SLD 700026
8 oz liquid x 4/pkg
1 litre
1 gallon
SeaLand Bowl Cleaner
Household toilet bowl cleaners often contain chlorine
solvents or caustic chemicals which will deteriorate
your toilet’s rubber seals and eventually cause water
leaks. Specially formulated for RV and marine toilets
▪▪Cleans in two minutes
▪▪Environmentally safe
▪▪Thick formula uses 20% less
SLD 721601
473 ml (16 oz)
Net
Propane
Dia
O.L.
PRP 1420-0011
11 lbs
12"
15.24"
PRP 1420-0017
17 lbs
12"
18.1"
Part #
Appliances / Sanitation
SeaLand Clean 'n Green
Cleaner & Deodorant
136
Webasto
N
Appliances / Sanitation
Webasto Hi Output Diesel Air Heaters
▪▪Quiet operation
▪▪Fresh-air or recirculated air-intake
▪▪Sealed control electronics and connectors
▪▪Precise electronic temperature control system to maintain a constant
cabin temperature through stepless modulation
▪▪Continuous heat output provides the exact temperature desired
▪▪High air flow output due to powerful radial blower
▪▪Very low electrical power and fuel consumption
▪▪Robust composite casing, resistant to high temperature or salt
WEB 5000699D
WEB 5001450A
WEB 5001461A*
* Request Item
Air Top 2000 ST
Air Top Evo 3900
Air Top Evo 5500
DIY Kit Includes:
■ Heater and Controller
■ Fuel Pump in Enclosure
■ Ducting and Connectors
■ Mounting Bracket and Hardware
Evo M Controller
w/Air Top Evo 3900 & 5500
■ Thru-hull exhaust fitting
■ Fuel Line
■ Exhaust Water Trap
■ Documentation
SMAR Temp Controller
w/Air Top 2000 ST
Webasto Air Heaters listed below are all-inclusive DIY Air Heater kits.
Air Top 2000 ST
5000699D
Air Top Evo 3900
5001450A
Air Top Evo 5500
5001461A
3,000 – 7,000 Btu
5,100 – 12,000 Btu 13,3000 Btu
5,100 – 17,000 Btu 18,700 Btu
0.03 - 0.06 g/h (0.12 – 0.24 l/h)
0.04 – 0.11 g/h (0.17 – 0.42 l/h)
0.12 g/h (0.47 l/h )
0.04 – 0.15 g/h (0.17 – 0.60 l/h )
0.17 g/h (0.66 l/h)
46 cfm (78 m3/h)
82.4 cfm (140 m3/h)
91 cfm (155 m3/h)
117.7 cfm (200 m3/h)
129.4 cfm (220 m3/h)
14 – 29 W
15 – 40 W
15 – 95 W
5.7 lbs (2.58 kg)
13 lbs (5.9 kg)
13 lbs (5.9 kg)
12.5" x 4.78" x 4.84"
16.65" x 5.83" x 6.38"
16.65" x 5.83" x 6.38"
SMAR Temp
Evo M Controller
Evo M Controller
Sailboat Sizing
22' - 28'
28' - 34'
35' - 38'
Powerboat Sizing
20' - 24'
24' - 30'
30' - 34'
Heater Output
PLUS Mode
Fuel Consumption
PLUS Mode
Air Flow (against 0.5 bar)
PLUS Mode
Rated Power Consumption
Net Weight
Dimensions (L x W x H)
Controller
Parts:
WEB 50487171A
In-line fuel filter
W
E
Webasto Marine Air Heaters provide a better
solution to boaters who require the ultimate in
compartment and cabin heating.
Operating up to 20 hours on a single gallon of
fuel, Webasto Marine Air Heaters are quiet and
a powerful source of heat on any vessel.
Maintenance
137
AWAB
138
BOATLIFE
138
CAPTAIN TOLLEY’S
140
EPIFANES
140
FORESPAR Lanocote & Marelube
141
LIFE SAFE
141
McLUBE
144
RESCUE TAPE
144
SHURHOLD
145
SYSTEM THREE
148
TEAKDECKING SYSTEMS
151
TEAR-AID
151
WESTERN PACIFIC TRADING
151
138
AWAB / BoatLIFE
AWAB 12MM Hose Clamps
AWAB Torro 9mm Hose Clamps
Part#
SAE
Size
Min.
Max.
AWA 316024
15-24
8
5/8"
15/16"
AWA 316028
19-28
10
3/4"
1-1/8"
AWA 316032
22-32
12
7/8"
1-1/4"
AWA 316038
26-38
16
1-1/16"
1-1/2"
AWA 316044
32-44
20
1-1/4"
1-3/4"
AWA 316050
38-50
24
1-1/4"
2"
AWA 316057
32-57
28
1-1/4"
2-1/4"
Part #
SAE
Range
AWA NT09016-W4
2
5/16" to 5/8"
AWA NT09020-W4
5
1/2" to 13/16"
AWA NT09022-W4
6
1/2" to 7/8"
AWA NT09027-W4
9
5/8" to 1-1/16"
AWA NT09032-W4
12
13/16" to 1-1/4"
AWA NT09035-W4
14
7/8" to 1-3/8"
AWA NT09040-W4
17
1" to 1-9/16"
AWA NT09045-W4
20
1-3/16" to 1-3/4"
AWA NT09050-W4
24
1-1/4" to 2"
AWA NT09060-W4
30
1-9/16" to 2-3/8"
AWA NT09070-W4
36
2" to 2-3/4"
AWA NT09080-W4
42
2-3/8" to 3-1/8"
AWA NT09090-W4
49
2-3/4" to 3-9/16"
AWA NT09100-W4
56
3-1/8" to 4"
AWA NT09110-W4
61
3-9/16" to 4-5/16"
AWA NT09120-W4
68
4" to 4-3/4"
AWA NT09130-W4
74
4-5/16" to 5-1/8"
AWA NT09140-W4
80
4-3/4" to 5-1/2"
AWA NT09150-W4
86
5-1/8" to 5-7/8"
AWA NT09160-W4
93
4-1/2" to 6-5/16"
A heavy-duty, one-step powder cleaner that
is ideal for restoring badly stained teak decks
without sanding. Teak Brite cleaner should be
applied to wet teak, scrubbed with a stiff brush
and rinsed thoroughly with fresh or salt water.
Will not harm seam compounds, fibreglass,
plastic or vinyl.
AWA NT09170-W4
99
5-7/8" to 6-11/16"
BOA 1085
AWA NT09180-W4
105
6-5/16" to 7-1/16"
AWA 125-0085/16"
AWA 125-0107mm
W
▪▪Flexible drivers for all clamp types
AWAB Narrow Clamps
E
AWAB Clamp Drivers
Dia. Inches
Range
MM
N
Maintenance
Torro 304 stainless steel clamps offer several advantages over
traditional perforated-band worm-gear style clamps:
▪▪Torro clamps are crafted entirely of AISI 304 Stainless Steel,
rather than a composite of lesser alloys
▪▪Torro clamps have rolled-up band edges and solid bands,
reducing the possibility of hose damage; the solid band of
the Torro clamps eliminates cracks starting at perforations,
extending the service life of the clamps when compared to
perforated-band clamps
▪▪Can be used in environments with a moderately aggressive
atmosphere and some risk of corrosion
▪▪9mm band width
Made from 316 stainless, the Awab series of
clamps feature rolled band edges to eliminate
the risk of hose damage. Extra wide threads
of the band are stamped, leaving the nonperforated band smooth on the inside. Band
and screw threads are properly pitched to virtually eliminate the
chance of the clamp backing off due to vibration.
▪▪304 stainless steel
▪▪Band width is 3/8"
AWA 319014
AWA 319017
AWA 319020
5/16” - 9/16”, each
7/16” - 11/16”, each
1/2” - 13/16”, each
BoatLIFE
BoatLIFE Teak Brite Cleaner
946 ml (26 oz)
Limited
Quantity
Shipping
D.G.
BoatLIFE Teak Brite Brightener
A time-saving one-step liquid brightener that is
the second step in the Teak Brite care system,
formulated to lighten and brighten your teak to
a lighter shade. It is also used as an in between
maintenance step to spruce up teak and keep
it looking like new. Will not attack seam or
bedding compounds.
BOA 1087
950 ml (32 oz)
Limited
Quantity
Shipping
D.G.
139
BoatLIFE
BoatLIFE Teak Brite Teak Oil - Natural
BoatLIFE Life Seal
A deep, penetrating teak preserver that is the final
step in complete teak care. It seals wood against
grease, oil, and food stains while restoring natural
oil and resins that are lost due to cleaning and
exposure to the elements.
Limited
A fast skinning (10 minutes) and fast curing (24 hours)
polyurethane/silicone adhesive sealant. Designed specifically
for fibreglass boats. Permanently flexible, non-shrinking.
Outstanding adhesion to fibreglass, glass, plastic and wood.
Can be used above or below water line.
BOA 1088
BOA 1089
Quantity
Shipping
946 ml (26 oz)
3.78 litre (128 oz)
Part #
D.G.
BoatLIFE Life-Calk Polysulfide Sealant
A one-part Thiokol polysulfide that cures to a positive
waterproof seal. Resists oil, gas, brine, weather and most
chemicals to stay seaworthy for years. Bonds to wood,
fibreglass, metal, plastic and glass.
Part #
Colour
30 ml
White
BOA 1030
83 ml tube
White
BOA 1031
83 ml
Black
BOA 1032
83 ml
Mahogany
BOA 1037
83 ml
Teak Brown
BOA 1033
315 ml cart
White
BOA 1034
315 ml
Black
BOA 1035
315 ml
Mahogany
BOA 1036
315 ml
Teak Brown
BOA 1161
83 ml tube
White
BOA 1162
83 ml tube
Black
BOA 1169
315 ml cart
Clear
BOA 1170
315 ml cart
White
BOA 1171
315 ml cart
Black
315 ml cartridge
Formulated to remove cured or uncured silicone,
polyurethane, and adhesives. Good for clean up on
hands, tools and equipment. Will not harm metals,
fibreglass, gel coat, glass, plexiglas, etc.
E
N
BOA 1291
BOA 1288
29 ml (1 oz)
473 ml (16 oz)
W
General purpose solvent removes uncured
polysulfide sealant and grease from tools and
equipment. Ideal for the preparation of seams
for caulking.
Limited
Quantity
Shipping
D.G.
BoatLIFE Empty Caulking Cartridge
These 315 ml empty cartridges complete
with end plungers provide a mess-free
method of applying 2-part caulking
compounds.
BOA 1120
Clear
BoatLIFE
Release Adhesive & Sealant Remover
Limited
Quantity
Shipping
BoatLIFE Life-Calk
Solvent and Cleaner
473 ml (pint)
Clear
83 ml tube
BOA 1252
D.G.
BOA 1056
38 ml tube
BOA 1160
A one part fast curing teak deck seam sealant. It provides
outstanding waterproofing and sealing qualities to wood
decks made of teak and other woods. Teak Deck Sealant
is fast skinning (30 minutes) and fast curing (24 hours).
It combines the ease of use of a one part sealant with the
outstanding performance of silicone rubber. The product is
applied in a normal fashion and sands clean after curing to
provide a smooth finish. It is unaffected by BoatLIFE Teak
Cleaners and Teak Oils. It is also non-corrosive, so it can
be used on any metal fittings on deck. The product remains
flexible, and does not shrink, crack, or dry out. Black.
Improves adhesion of both one-part and two-part
Life-Calk, especially on oily woods, teak and steel.
Life-Calk Primer is a clear, fast-drying liquid and
easy to apply.
230 ml (8 oz)
BOA 1109
BoatLIFE Teak Deck Sealant
BoatLIFE Life-Calk Primer
BOA 1059
Colour
Limited
Quantity
Shipping
D.G.
BoatLIFE Fix Repair Putty
Unlike similar products on the market,
Fix is a non-sagging repair putty that
cures like steel. Completely cured
after 24 hours and can even be used
underwater. Once cured, it can be
drilled, tapped, sanded and painted. It
bonds to fiberglass, wood, metal, glass
and concrete and is impervious to oil, gasoline, alcohol, caustic
detergent and salt water oxidation. Easy clean up with soap and
water. Heat tolerant to 300° F.
BOA 1196
16 oz
Maintenance
Size
BOA 1305
Size
140
BoatLIFE / Captain Tolley's / Epifanes
Epifanes Rapidcoat & Rapidclear
The original cure for dry rot. A penetrating
adhesive, flexible sealant that restores strength
to rotted wood. By penetrating deeply and
saturating rotted wood, the progress of dry rot
is arrested and the subsequently cured mass is
stronger than the original wood. Ideal for wood
encapsulated by fibreglass such as transoms and
stringers.
Quick and easy alternative to conventional varnish.
▪▪Easy application by brush, roller, or spray
▪▪Rapid drying
▪▪Great bonding to oily woods - like teak
▪▪No sanding between coats
▪▪Excellent water resistance
▪▪Great breathing properties and flexibility
▪▪U.V. Protection
▪▪Suitable for interior and exterior use
▪▪Semi-gloss finish
Use Rapidcoat if you want a light tint added to the wood
Use Rapidclear if you want zero tint, it is the perfectly clear product
118 ml (4 oz)
473 ml (pint)
946 ml (quart)
W
E
Maintenance
N
BoatLIFE Fibreglass Powder Cleaner
and Stain Remover
▪▪Use to remove heavy oxidation, stains, dirt,
grease, and oil from fibreglass
▪▪No-scratch formula is completely harmless to
gel-coat finishes
▪▪Use with fresh or salt water
BOA 1190
Rapidclear - 750 ml
Rapidcoat - 750 ml
Epifanes Rubbed Effect Varnish
▪▪Interior varnish that provides a rich satin
lustre finish
▪▪Based on polyurethane alkyds
▪▪Apply as a final, finish coat over several
build-up coats of clear gloss Epifanes varnish
▪▪Coverage: 140 sq. ft. per litre
737 g (26 oz)
EPI RE1000MLLitre
W
▪▪Revolutionary high performance cleaner and
▪▪UV protectant; will not deteriorate graphics
like other solvent-based waxes
E
N
Graphix Wax
BOA 1121 BOA 1124 EPI RCC-750
EPI RC-750
Epifanes Wood Finish Gloss
▪▪Formulated to give a high gloss finish (with
excellent adhesion) to new teak and other
(oily) exotic hardwood
▪▪Protection even in tropical climates
▪▪Sanding between coats is not required when
the next coat is applied within 30- 72 hours
▪▪Coverage: 130 sq ft per litre
8 oz
16 oz
Captain Tolley's
EPI WFG-1000MLLitre
Epifanes Wood Finish Matte
▪▪Exterior/interior matte finish
▪▪Must be applied over properly prepared
wood, using Epifanes Wood Finish Gloss
Captain Tolley’s Creeping Crack Cure
▪▪A water based sealant formulated to penetrate
fine cracks
▪▪Uses capillary action to find leaks without
dismantling
▪▪Sets to a clear, flexible and waterproof seal
▪▪Compatible with most materials, including
glass, wood and metal
EPI WFM-1000MLLitre
CAP CTCC
CAP 250-CTCC
EPI TPVB-500ML
EPI TPVB-1000ML
Epifanes Thinners & Accessories
Brushing thinner for all one-part Epifanes varnishes.
2 oz
250 ml
Epifanes
Thinner, 500 ml
Thinner, 1000 ml
Spraying thinner for all Epifanes one-part varnishes.
E
N
EPI TPVS-1000ML
Spray thinner, Litre
W
Epifanes Clear Gloss Varnish
▪▪A clear, high gloss one-part varnish, based on
tung oil, phenol and alkyd resin
▪▪Excellent exterior durability and ultra-violet filter
▪▪World famous for it's high gloss retention
▪▪Coverage: 150 sq. ft. per litre
EPI CV-1000MLLitre
EPI CV-500ML
500 ml
Accelerator, use to speed-up cure time of one-part
Epifanes paints and varnishes. Use no more than 5%
to preserve gloss.
EPI APV-500ML
Accelerator, 500 ml
For thinning and cleaning all polyurethane
Epifanes products.
EPI PUTB-500ML
EPI PUTB-1000ML
500 ml
1000 ml
W
E
BOA 1063
BOA 1064
BOA 1065
N
BoatLIFE "Git" Rot
Forespar / Life Safe
141
Forespar Marelube
Forespar Lanocote
Extremely effective in preventing and
stopping corrosion on all types of metals
Formulated to withstand salt water
marine conditions, particularly useful in
preventing thread seizure due to all types
of corrosion on boats and machinery.
Applied during assembly, LanoCote
will greatly assist in easy dismantling
years later. Combats galvanization where
dissimilar metals are fastened together,
such as stainless steel fittings on alloy masts, etc.
FRS 770001
FRS 770003
FRS 770007
4 oz jar
16 oz jar
8 oz spray
▪▪Excellent dissimilar metals barrier for
long term protection on fasteners such as
stainless steel screws and bolts used on
aluminum spars
▪▪Superior corrosion barrier and anti-seize
for screws, bolts and nuts
▪▪Won't wash away!
▪▪High-load lubrication in a fresh or salt
water environment
▪▪Use on turnbuckles and other rigging fittings
▪▪Great for rebuilding and maintaining outboard lower units
▪▪Formulated with 45% PTFE for maximum effectiveness
▪▪Nothing outperforms Marelube® Tef 45
▪▪Many commercial and industrial uses
▪▪Contains no petroleum
▪▪ISO 9001 Certified
FRS 770065
FRS 770066
FRS 770067
5 cc syringe
20 cc syringe
4 oz jar
Forespar Lanocote Prop & Bottom
▪▪Recommended for boats operating at speeds up to 15 knots
▪▪Can be applied with boat in the water
▪▪Environmentally safe
▪▪Flow efficient
▪▪Extensively tested coating for boat bottoms,
props, struts, shafts and trim tabs
▪▪Depending on local conditions, LanoCote Prop
and Bottom can significantly retard marine growth
for over six months
▪▪It can be applied over clean, fresh bottom paint or
a freshly clean bare bottom for added protection
and to make regular cleaning easier and faster;
also apply as above to clean metal surfaces.
FRS 770035
16 oz
FRS 770050
FRS 770055
4 oz jar, paste
16 oz bottle, liquid
Forespar Marelube Extra
All the features of Marelube above formulated to
provide superior lubrication in wet conditions and
keep moving parts mobile under load.
FRS 770056
4 oz jar, paste
Forespar Tea Tree Power
This mold mildew & odor eliminator is a natural air cleaner
formulated especially for marine use. Blended using 100%
Australian tea tree oil, it maintains healthy air quality and
leaves a subtle, naturally clean scent throughout the boat.
▪▪Non-toxic and bio-degradable
▪▪Exceptional antiseptic and antimicrobial properties
▪▪Attacks and degrades airborne spores
and penetrates porous boat surfaces to
eliminate the odor source
▪▪Also an effective mold cleaner and
mildew cleaner strong enough to
tackle the damp marine environment
FRS 770201
FRS 770202
FRS 770203
FRS 770207
2 oz gel
4 oz gel
8 oz gel
8 oz spray bottle
Life Safe
Life Safe Traction Tape
Textured vinyl helps reduce the risk
of slipping.
LIF RE3954
LIF RE3955
2" x 15', Grey
2” x 15’, White
Life Safe Butyl Tape
Butyl tapes help prevent and reduce costly water
damage. Tough rubber, pressure sensitive mass,
offers excellent adhesion to a variety of surfaces
(no applicators required). Used to seal out: dirt,
dust, moisture and water.
•Easy to use in tape form
LIF RE20761
3/4” x 1/8” x 20’
Maintenance
Forespar Marelube TEF 45
Specially formulated using advanced
lubrication technology made for use in
"Marine" grade valves, seacocks and
any other marine parts that need periodic
lubrication. Made from long-lasting PTFE
Teflon-based lubricants. Designed to keep
marine valve seals and balls working
smoothly. Works on winches, hinges, tracks
and other boat parts that need to move
smoothly.
Clear, non-staining and non-toxic lube that works
equally well if fresh as well as salt water.
142
Life Safe
Life Safe Rigging Tape
Life Safe Boat Cover Reinforcement and Repair Tape
Rigging tape protects against chafing
and sharp edges while providing
extraordinary safety for sails, lines and
rope ends.
An ideal way to prolong the life of your boat cover,
this tape adds strength and tear-resistance along seams,
stress points, creases and corners. This extra strong
tape resists stretching, wrinkling and tearing. Use it as
extra padding on stress points around windshields or
trolling motors. Also great for bimini tops, sails, canvas
awning, and pool covers.
LIF RE3866
LIF RE3867
1” x 15’, Black
1” x 15’, White
LIF RE1136
Life Safe Mast Boot Tape
Life Safe Super Seal Tape
Installing MastBoot does not require un-stepping
the mast. It bonds itself into a solid piece of
rubber offering protection against moisture. It
conforms to irregular surfaces and leaves no
sticky residue. White.
Works on wet, dry, greasy or dirty surfaces.
Works on metal or plastic pipes. Use for
plumbing, electrical or emergency repairs.
LIF RE3940
LIF RE3941
Maintenance
8-3/4” x 10’
LIF RE3869
4” x 40”, White
4” x 100”, White
Life Safe Hatch Tape
For bedding in windows and deck fittings.
Also used as an anti-vibration and water
seal for engine hatch covers, etc.
Life Safe Sail Patch Tape
Excellent resistance to tearing in any direction,
very aggressive adhesive, works on damp sails.
Transparent colour suitable on any sail type.
Light weight and flexible.
LIF RE3843
1" x 15'
LIF RE-3870
3/4" x 7'
3” x 40”
Life Safe Anti-Slip Grit Tape
Durable in wet or dry conditions.
Self-adhesive rolls are easy to use.
Simply cut, peel and stick. Improves
footing on frames during cleaning,
maintenance and boat launching.
Life Safe Bimini Bandage Tape
Excellent resistance to tearing in any direction,
very aggressive adhesive, works on damp covers.
Transparent colour suitable on any cover. Light
weight and flexible.
LIF RE3868
LIF RE36028
LIF RE36029
3” x 40”
1" x 15', Black
2" x 15', Black
Life Safe Traction Strips
3” x 40”
W
LIF RE1164
E
Self-adhesive kevlar scrim encapsulated in
Mylar film. Ideal for repairs to kevlar and highperformance sails. Excellent resistence to tearing
in any direction.
N
Life Safe Sail Kevlar Tape
Textured white vinyl helps reduce the risk of
slipping. For safer footing everywhere… steps,
ladders, ramps, basement stairs, boats, trucks,
trailers, farm equipment, decks, skateboards,
pools, docks, diving boards and campers.
LIF RE3902WH
LIF RE3906WH
1" x 12", 10/pkg
6" x 21", 8/pkg
Life Safe Rip Stop Sail Repair Tape
Life Safe Traction Tape
▪▪Adheres instantly on contact
▪▪Conforms to the shape of the sail
▪▪Prevents against sail chafe
▪▪2” x 15’
Textured vinyl helps reduce the risk of slipping.
LIF RE1140White
LIF RE1141Black
LIF RE1144Green
LIF RE1145Gray
LIF RE3904BL
LIF RE3897WH
6” x 21”, Black
4” x 9”, White
For Everything
Under The Waterline
For Everything
That Shines
Environmentally Friendly Speed Polish
Use on:
Any hull surface, outdrive,
propeller, or fittings
• Helps prevent marine growth and slime
from adhering for weeks
• Below-the-waterline high-gloss foul release polish
• Reduces drag, increases efficiency on
powerboats and sailboats
• Easy wipe on/wipe off application onto any
hull surface, outdrive, propeller, or fittings
• Biodegradable, non-toxic, non-metallic,
non-leaching, safe to use
• Cleans, polishes and protects your hull
with one easy application
Use on:
Hatches, drawers, sliding doors, sail
tracks, mast tracks and slides, engine lower
units, propellers and bow thrusters, fishing
reel components and fly line, sails, battens
and telltales, slider cars and tracks
• Repels water, dirt, salt and contaminants
• Reduces drag in air and water
• Clean, dry and easy-to-use
• Lasts up to 10 times longer than Teflon®
additives, oil or wax-based lubricants
ANTIFOUL ALTERNATIVE
SAILKOTE™
High Performance Dry lubricant
ONEDROp™
Use on:
Ball bearing traveler cars and battcars
• Repels salt, dirt and other deposits
• Protects, lubricates and conditions
bearing surfaces
• Reduces friction so balls to roll
freely and evenly, greatly improving
performance
• Only one drop needed
• Cleans, polishes and protects
• Reduces drag and repels water
• Environmentally friendly citrus base
• Long-lasting, high-gloss finish
• Superior UV protection
Ball Bearing Conditioner
Use on:
Fiberglass, metal, plexiglass
and painted surfaces
High Performance Speed Polish
HULLKOTE™
With new products from the team that brought you Sailkote™
For Everything
That Slides
For Everything
That Rolls
put the smooth back in sailing
Life Safe
144
McLube / Rescue Tape
McLube
Rescue Tape
Rescue Tape
McLube SailKote
Maintenance
SailKote is specially formulated with Dupont
Krytox, an easily applied environmentally friendly
translucent liquid lubricant specifically designed
for marine use. It dries quickly to a hard, smooth, ultra-slick,
hydrophobic dry coating that bonds tenaciously to almost any
surface. And because SailKote is a dry lubricant, it will not attract
dirt or contaminants and will not transfer to other surfaces, or you.
SailKote is typically five times as effective, and lasts much longer
than, wax, oil or Teflon based lubricants.
MCL SAILKOTE6OZ
MCL SAILKOTE11OZ
113 gram, aerosol
312 gram, aerosol
McLube Onedrop
▪▪Keeps bearings rolling freely
▪▪Keeps bearings dirt-free
▪▪Prevents bearings from skidding
▪▪Only one drop needed
MCL ONEDROP.5FLOZ
This environmentally-friendly, citrus-based polish deep
cleans and protects your hull so it’s always in racing
condition. Its long-lasting, high-gloss finish repels water
to reduce drag for ultra-fast results. McLube HullKote
applies easily over other waxes and polishes and is safe to
use on fibreglass, metal, Plexiglas and painted surfaces.
HullKote lasts more than a season when applied above
the waterline, and more than 20 hard days of sailing when
applied below.
16 oz
McLube Speed Polish
Antifoul alternative combines McLube's same very fast,
world-renowned proprietary formulation of our bonded
PTFE suspension system with an entirely revolutionary
citrus-based, long-lasting and high-gloss polish.
▪▪High-gloss, citrus-based foul-release polish for
everything below the waterline
▪▪Prevents marine growth and slime from adhering for
weeks
▪▪Reduces drag and increases efficiency on both power
and sail boats
▪▪Easy to apply to any hull surface
▪▪Non-toxic, non-metallic, non-leaching
▪▪Biodegradable
▪▪Environmentally friendly
MCL 7881
16 oz
RTP RT201201
RTP RT201202
RTP RT201203
RTP RT201204
RTP RT201205
RTP RT201206
RTP RT201207
RTP RT201208
RTP RT303601
RTP RT303603
RTP RT303604
1” x 12’ Black
1” x 12’ Red
1” x 12’ White
1” x 12’ Clear
1” x 12’ Yellow
1” x 12’ Blue
1” x 12’ Green
1” x 12’ Orange
2” x 36’ Black
2” x 36’ White
2” x 36’ Clear
RTP 24DISPLAY
24 Roll, assorted counter display
.5 oz
McLube HullKote
MCL HULLKOTE16OZ
▪▪Self-fusing
▪▪700 PSI tensile strength
▪▪Insulates 8,000 volts per layer
▪▪Withstands 500° F of heat
▪▪Remains flexible to -85° F
▪▪Creates a permanent air-tight, water-tight seal in seconds
▪▪Never gets gummy or sticky like electrical or duct tape
▪▪Has a long shelf life
▪▪Resists fuels, oils, acids, solvents, salt water, road salt, UV rays
Shurhold
145
Shurhold Broom
Angled broom mop that attaches to
handles.
SHU 120
Shurhold Handles
Handles are made from triple anodized, heat treated aluminum and
quickly locks with all Shurhold accessories.
Shurhold Boat Hook
Feature SHUR-LOK quick release adapter. Exclusive
3 in 1 boat hook that features a line carrying feature,
centre push off, and a basic boat hook.
SHU 730
SHU 740
SHU 760
30" fixed length
40" fixed length
60" fixed length
SHU 833
SHU 855
72" telescoping, locks at 4 lengths from 43"-72"
108" telescoping, locks at 5 lengths from 63"-108"
SHU 130
Shurhold Mop
Shurhold Brushes
900 series brushes feature a hard wood base, premium bristles,
wrap around safety bumper, flared bristles, and angled heads.
SHU 113
Shurhold Adapter
SHU 950
SHU 955
SHU 960
SHU 970
Threaded adapter that is compatible with most
internally threaded products.
6" stiff, white polypropylene bristles
6" medium, yellow polystyrene bristles
6" soft, yellow polystyrene bristles
6” extra soft, blue nylon bristles
SHU 101
E
N
W
965
SHU 965
6" Combo soft/medium, red polystyrene bristles
Shurhold Swivel Pads and Scrubbers
Swivel pad combo that includes swivel
pad base with the SHUR-LOK adapter and
synthetic lambs wool cover.
SHU 1710C
Swivel pad base and SHUR-LOK adapter.
SHU 1700
SHU 980
SHU 985
SHU 990
10" soft, yellow polystyrene bristles
10" medium, yellow polystyrene bristles
10" stiff, white polypropylene bristles
Application Brushes
Great for windows, hulls, wheels, and other hard to reach areas.
SHU 310 8" nylon soft, blue nylon bristles
SHU 308 8" soft, yellow polystyrene bristles
SHU 1703
Coarse scrubber pad (2 Pk)
Maintenance
All mops are oversized and feature the
exclusive SHUR-LOK quick release
adapter. Synthetic chamois mop, super
absorbent.
146
Shurhold
Shurhold Marine Mate Brush & Handles
Shurhold PVA Sponge & Towel
For the budget minded customer who wants quality without the
SHUR-LOK system.
PVA sponges absorb more than any other sponge,
making for faster and more effective drying. The
sponges prevent water spots on all surfaces, and
resist mold and mildew.
7" Hardwood brush with safety bumper, and stiff polypropylene
bristles mounted on a 48" threaded wood handle.
SHU 210
SHU 1950Stiff
▪▪Absorbs 50% more than natural chamois
▪▪Extra large size: 17" x 27"
7" Hardwood brush with safety bumper, and soft flagged
polystyrene bristles mounted on a 48" threaded wood handle.
SHU 220
SHU 1960Soft
Shurhold Microfibre Towels
Shurhold Hand Held Brushes
3-Pack of towels includes:
(1) Polish & Shine - Super soft
(1) Wash & Wax, extra strong
(1) Glass & Mirror - Lint free
Maintenance
Includes unique spot scrubber on handle.
▪▪L: 6" x W: 2-1/2" x H: 2"
SHU 270
SHU 293
Utility brush
Shurhold Snap Stick
Soft comfortable handle and safety bumper.
▪▪L: 7-1/4" x 3-3/4" x H: 4.1/2"
SHU 272
For snaps and zippers on awnings, straps and
other items that suffer the corroding effects
of rain, dirt and grime. One application
from the Snap-Stick tube can last up to three months. Its special
ingredients are non-toxic, biodegradable, and won’t harm
fabrics, plastics or metals.
Scrub brush
Stiff chemical resistant bristles.
▪▪Head: 3-1/2" x 3-1/2
SHU 251
SHU 274Short
SHU 276
20" Dip & scrub brush
W
E
▪▪Cleans 1/2" - 1" rope
▪▪Ideal for boat line
▪▪Simple to use and store
▪▪Works on twisted & braided line
▪▪4" x 3"
Shurhold Hose Nozzle
N
Shurhold Flexible Rope & Cord Brush
W
E
SHU 2813/pkg
N
▪▪Blended pad is made from a high
grade bronze metallic wool
▪▪Similar to a steel wool but ultra fine
and rust resistant
The ergonomically-shaped, die-cast zinc hose
nozzle body has a soft, black, vinyl grip for a
comfortable hold. It includes a hold-open clip
for a constant water flow and has a stainless
steel spring
SHU 288
SHU 273
Shurhold Bronze Wool
.45 oz
148
System Three
System Three Resins
T-88 Structural Epoxy Adhesive
System Three Cold Cure Epoxy
Maintenance
Bonds virtually everything, including wood, metals,
concrete, and non-waxy plastics in cold, wet, hot
and dry weather. Cold Cure Epoxy exhibits superior
strength and bonding capabilities down to 2oC (35o
F) even in moist and humid conditions. Cold Cure
is ideal for gluing together unlike materials such as
wood to metal or to plastics. Cold Cure is an excellent gap-filler and
requires no clamping. gap-filler, putty, fairing compound. Cold Cure
epoxy can be mixed with a variety of manufactured fillers to increase
its viscosity for filling gaps and fairing surfaces. For grouting
applications, Cold Cure can be mixed with sand or cement.
SYS F1000K38 355 ml (12 ounce) kit
SYS F1000K40 710 ml (1.5 pt) kit
SYS F1000K42 1.42 litre (1.5 qt) kit
Limited
Quantity
Shipping
D.G.
Temp
°F/°C
Pot Life
Working
Time
Cure Time
(80-90%)
85 / 30
20 min
30 min
18 hrs
70 / 20
30 min
45 min
24 hrs
50 / 10
40 min
60 min
36 hrs
40 / 5
40 min
60 min
48 hrs
N.B. Cold Cure is hard at 80 - 90% cure time and 100% cure occurs in 5- 7 days.
T-88 is a high-performance, non-brittle, two-part epoxy adhesive
designed to give superior results under adverse conditions. The
adhesive may be used without modifications in normally fitted
joints, and will cure in any thickness without shrinkage. T-88
is clear amber and becomes virtually invisible when varnished.
T-88 exhibits outstanding adhesion and permanence on a wide
variety of materials.
Recommended Uses:
Mixed at a 1:1 by volume ratio, T-88 will cure at temperatures
as low as 35°F. When fully cured, it is unaffected by water, oil,
kerosene, and many other chemicals. It will not stain
wood and is immune to fungus and rot. T-88 is unique
in that it may be applied to damp wood, provided it is
worked well into the surface.
Mix Ratio by Volume.....................100:100
Mix Ratio by Weight......................100:83
Tensile Strength, psi......................7000
Flexural Strength, psi....................11,500
Coverage.......................................80 Ft 2/Gal
Gel Time @ 77°F (25°C)..............60 Minutes (100g mixture)
Full Cure @ 77°F (25°C).............4 - 6 Hours (100g mixture)
SYS 1100K10
236 ml (8 oz) kit
SYS 1100K91
Universal cartridge, 250 ml (8.4 oz)**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99
► Larger sizes available on request
System Three G-2 Epoxy
A solution to difficult gluing problems, G-2 Epoxy is specially
formulated for the best possible bonding to resinous and acidic
woods such as oak, teak, rosewood, and other tropical
and exotic wood types where other glues fail. G-2
is an excellent all-around adhesive and provides a
permanent, waterproof bond for all types of woods,
metals, rocks and gems, concrete and non-waxy
plastics.
SYS F1110K38
SYS F1110K40
SYS F1110K42
355 ml (12 ounce) kit
710 ml (1.5 pt) kit
1.42 litre (1.5 qt) kit
Temp
°F/°C
Pot
Life
Working
Time
Cure Time
(80-90%)
85 / 30
20 min
30 min
18 hrs
70 / 20
30 min
45 min
24 hrs
50 / 10
40 min
60 min
48 hrs
N.B. G-2 is hard at 80-90% cure time and 100% cure occurs in 5 - 7 days.
► Larger sizes available on request
Mixing tips 6/pkg
System Three Resins Quick Cure Epoxy
The standard quick setting “five minute epoxy” system.
Mix at a 1:1 by volume ratio. Quick Cure is ideal for all
small jobs requiring a strong bond and rapid cure. Quick
Cure is highly water resistant but not waterproof. Quick
Cure is quite thick, but is easily measured by squeezing
equal sized lumps from the convenient application bottles
or from the UNI cartridge.
Mix Ratio by Volume................100:100
Mix Ratio by Weight.................100:97
Gel Time @ 77°F (25°C).........2 - 3 Minutes (30g mix)
Tack Free @ 77°F (25°C)........5 Minutes (30g mix)
SYS 1000K10
SYS 1000K90
273 ml
50 ml syringe with 2 mixing tips (*Note 1)
*Note 1* Requires a dual cartridge gun (See below)
SYS 1000K91
Universal cartridge 250 ml (8.4 oz)**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99 Mixing tips 6/pkg (for universal cartridge)
SYS 3610S90
Mixing tips, each (for 50 ml syringe)
► Larger sizes available on request
System Three
System Three
Silverthane Adhesive/Sealant
▪▪A two-part polyurethane sealant-adhesive
▪▪It cures overnight in any thickness to a very tough
flexible rubber
▪▪Bright white and is unaffected by weathering and UV
degradation
▪▪A tenacious bonder to many substrates including
difficult to bond plastics
▪▪It is flexible at temperatures well below zero
▪▪Can be painted with most paints without surface
preparation
SYS 2100K06
120 ml (4 oz) tubes
SYS 2100K90
50 ml syringe with 2 mixing tips (*Note 1)
SYS 2100K91
252 ml (8.4 oz) cartrige with one mixing tip (*Note 2)
Parts:
SYS S3660S99 Mixing tips 6/pkg (for universal cartidges)
SYS 3610S90
Mixing tips each (for 50 ml syringe)
SYS 3600S90
Mixing gun (for 50 ml syringe)
System Three Resins SilverTip GelMagic
A toughened, non-sagging, two component,
structural epoxy adhesive designed for
superior bonding to wood and most porous
materials. It is unique in that it starts as two
self-leveling liquids, which form a soft,
thixotropic, sag-resistant paste when mixed.
Measuring is easily accomplished by either
volume or weight. GelMagic requires no
additional modification with fillers and
can be applied to vertical and overhead
surfaces without running. GelMagic exhibits exceptionally high
peel strength and employs a state of the art, two-phase epoxy
morphology, which creates an adhesive bond that is tougher, more
resistant to embrittlement and has better elevated temperature
properties than other room temperature cured epoxy adhesives.
GelMagic can be post-cured up to 140°F for even greater
performance.
Coverage @ 250 microns (10 mils)........ 150 ft2/gal
Gel Time @ 77°F (25°C)........................ 15 Minutes (100g mix)
Tack Free Time @ 77°F (25°C).............. 3 Hours (100g mix)
SYS 1230K40
SYS 1230K91
710 ml (1.5 pt) kit Gelmagic kit
190ml (6.4 oz) cartridge**
**Mixing tips sold separately
*Note 2* Requires a high ratio gun, 12:1 or higher
Parts:
SYS S3660S99
Mixing tips 6/pkg
► Larger sizes available on request
System Three
Adhesive Dispensing Gun
▪▪Use with 50ml 2-part cartridges
SYS 3600S90
System Three Resins SilverTip Epoxy
A medium-low viscosity, liquid epoxy resin
system that has been optimized for coating
and reinforcing fabric saturation in woodcomposite boat building. Designed for use
with fibreglass, Kevlar, Dynel, and graphite
as well as on bare wood. It has superior
wet-out characteristics with little tendency to
foam or trap air. Both the resin and hardener
are nearly colourless and are used in an easy
2:1 volumetric ratio. Fillers, wood flour, and
bulking agents can be combined with SilverTip epoxy.
Gel Time @ 77°F (25°C)
Fast Hardener...............................26 Minutes (100g mixture)
Slow Hardener..............................60 Minutes (100g mixture)
Tack Free Time @ 77°F (25°C)
Fast Hardener...............................3 Hours (100g mixture)
Slow Hardener..............................6 Hours (100g mixture)
SYS 0900A16
SYS 0900A24
946 ml (1 qt)Resin
3.78 litre(1 gal)
Resin
SYS 0900B14
SYS 0901B14
473 ml (1 pt)
473 ml (1 pt)
Hardener fast
Hardener slow
SYS 0900B20
SYS 0901B20
1.89 litre (.5 gal)
1.89 litre (.5 gal)
Hardener fast
Hardener slow
► Larger sizes available on request
System Three Resins MirrorCoat
MirrorCoat is a pourable, self-leveling bar and
tabletop coating. It works well on many surfaces
such as wood, ceramics, plaster, masonry and some
plastics. MirrorCoat cures to a glossy, smooth finish
that is scratch and stain resistant. Cured MirrorCoat
is waterproof and unaffected by alcohol.
Mix Ratio by Volume...................100:50
Mix Ratio by Weight....................100:54
Coverage @1.5 mm (60 mils).....25 ft2/Gal (0.6 m2/L)
Gel Time @ 77°F (25°C)............90 Minutes (100g mixture)
Full Cure @ 77°F (25°C)...........48 Hours (100g mixture)
SYS 0500K40
SYS 0500K42
710 ml (1.5 pt) kit
1.42 litre (1.5 qt) kit
► Larger sizes available on request
Maintenance
*Note 1* Requires a dual cartridge gun (See below)
*Note 2* Requires a high ratio gun, 12:1 or higher
149
150
System Three
W
E
SculpWood paste is a 2-component, spreadable,
waterproof paste for filling cracks and defects
in rot-damaged wood. It spreads easily; won't
sag, drag or pull. An excellent companion for
Sculpwood Putty where filling cracks is needed.
SYS 1610K16
Small, 4" x 2-3/4"
Large, 5-3/4" x 3-1/2"
System Three S-1 Epoxy Sealer
N
Maintenance
SYS 3540S99
SYS 3541S99
237 ml (8 oz)
System Three
Sculpwood Epoxy Paste Kit
W
E
W
E
Epoxy will not stick to these re-usable
polyethylene squeegees. These can be cut and
trimmed to make filleting tools and even notched with pinking
shears for spreading epoxy glue over large areas.
SculpWood putty is a 2-component, solvent
free, kneadable epoxy resin putty. It is moldable,
carvable, lightweight, strong, and exhibits
excellent adhesion to a variety of substrates. It is
easily sanded and will accept paint, screws and
nails. It is most commonly used in conjunction
with System Three RotFix, a low viscosity wood
sealer and consolidant.
SYS 1600K10
System Three
Squeegees
N
N
System Three
Sculpwood Epoxy Putty Kit
946 ml (1 qt)
S-1 Epoxy is a 50% solids epoxy/
polyamide system. S-1 contains a special
blend of solvents which provide the lowest
possible viscosity along with the longest
allowable pot life. S-1 Epoxy is designed
specifically as a waterproof primer for
all types of substrates. S-1 Epoxy is excellent for preserving and
prolonging the life of woods, concrete, metals and fibre-reinforced
polyester.
SYS F1400K20
SYS F1400K50
1.89 litre (1/2 gal) kit
7.6 litre (2 gal) kit
► Larger sizes available on request
System Three Accessories
System Three Resins Rot Fix
An ultra-low viscosity, penetrating sealer for
hardening and solidifying rot damaged wood.
▪▪100% solids formulation is low odour and
solvent free
▪▪Flows like water for superior penetration
into wood and most porous materials
▪▪Two part system features an easy 2:1 mixing ratio
▪▪Apply by pouring or brush
▪▪Reliably cures at temperatures as low as 35°F
▪▪Can be used on damp wood
▪▪Use to harden soft, “punky”, wood as a base for further repair
▪▪Seals wood permanently to prevent future moisture penetration
SYS 1500K40
SYS 1500K42
710 ml (24 ounce kit)
1.42 litre (1.5 quart) kit
System Three Resins QuikFair
QuikFair is a lightweight, micro-balloon-filled, fast-curing twopart epoxy fairing putty with excellent moisture resistance. The
two colour coded parts have a non-sagging, butter-like
consistency and are easily mixed to form a third colour.
At 70°F, QuikFair is sufficiently cured to be hand-sanded
in 3 hours or machine sanded in 4 hours. Recommended
on both fibreglass and wood-epoxy boats above or below
the water line.
Mix Ratio by Weight......................100:50
Mixed Colour................................Tan
Gel Time @ 77°F (25°C)..............10 Minutes (100g mix)
Tack Free Time @ 77°F (25°C)....3 Hours (100g mix)
SYS 1400K06
SYS 1400K40
SYS 1400K42
SYS 1400K46
133 ml (4.5oz) kit
710 ml (1.5 pt) kit
1.42 litre (1.5 qt) kit
1.5 Gallon kit
► Larger sizes available on request
SYS 3003S99
SYS 3010S99
SYS SYRINGE
SYS STIR STICK
SYS 3001S99
Disposable mixing cups
1 quart mixing tub
60 C.C. syringe
Wooden stir/mixing stick
3 oz mixing cups, 100/pkg
Teakdecking Systems / Tear-Aid / Western Pacific Trading
Teakdecking Systems
151
Tear-Aid
N
W
E
Teakdecking Systems Teak Caulking
A one-part, Silane Polymer system which when
exposed to moisture in the air reacts to form a
tough, flexible solid rubber compound. TDS Teak
Caulking is a thixotropic material that does not
sag during cure, and, when cured, has excellent
temperature stability and chemical resistance.
Because the sealant is neutral cure, it is noncorrosive to all substrates.
▪▪Tack free time: 20-40 minutes
▪▪Tensile strength: 300psi
▪▪Elongation: 350%
▪▪Shelf life: 18 months
Size
Colour
305 ml cartridge
Black
TDS SIS440-W
305 ml cartridge
White
TDS SIS440
600 ml sausage
Black
Teakdecking Systems Fitting Epoxy
A custom blend of high quality epoxy
resins, activators and additives formulated
for outstanding adhesion to common
marine substrates such as fibreglass,
wood, aluminum and steel. Developed as
a ‘tough’ adhesive capable of enduring
the flexing yachts undergo at sea, FE180A
has special additives that enhance internal strength, bond
strength and viscosity control under a variety of adverse
environmental conditions. TDS Fitting Epoxy is also DOT
(US Dept. Of Transportation) certified to be non-corrosive
and is designed not to harm the environment.
▪▪Approximate coverage: 30 ft2
TDS FE180A
1:1 ratio, 7.56 litre (2 gallon) kit
▪▪Air & watertight - under pressure even when
stretched
▪▪Instant adhesion - with no sewing
▪▪Elastic - conforms to irregular surfaces
▪▪Peel & stick
▪▪UV resistant
▪▪Type A: sticks to canvas, most fabrics, rubber,
neoprene, most plastics, nylon, fiberglass, stainless
steel, aluminum, polyethylene, polypropylene and
non-oiled leather
▪▪Type B: Sticks to vinyl and vinyl-coated materials.
Has unique adhesive that resists the oils in vinyl
▪▪Kit contains: (1) 3"x12" TEAR-AID patch, (1) 7/8" square
patch, (1) 1 3/8" square patch, (1) 12" Reinforcement filament
for repairing tears at edges. (2) alcohol prep pads, (1) illustrated
instructions and product repair list
TEA D-KIT-A01-100
Fabric, type A
TEA D-KIT-B03-100
Vinyl. type B
Repair Tape Counter Display
▪▪15 Vinyl repair kits
▪▪5 Fabric repair kits
TEA D-CASE-V10-005
Video Counter Display with Product
▪▪15 Vinyl repair kits
▪▪5 Fabric repair kit
TEA CASE-V21
▪▪ Sound ON/OFF switch
▪▪ Wireless remote
▪▪ Sales and application clips
▪▪ 16 Minute run loop with 11
different industry clips
Western Pacific Trading
Teakdecking Systems Teak Cleaner
Even though ECO-100 teak cleaner powder contains
no acid, caustic sodas and phosphates, it is a very
powerful and effective cleaner that cleans and
brightens without removing the soft fibers of your
teak. It mixes easily in water and is designed to not
harm your teak, caulking, hardware or paint.
▪▪100% Environmentally safe: Non-toxic (The
ONLY U.S. EPA recognized teak cleaner)
▪▪Concentrated - Dilute with water
▪▪No acid, caustic sodas or phosphates
▪▪Removes mold & mildew stains
▪▪Tough on dirt, gentle on teak
▪▪Economical cleaning solution
▪▪Cleans & brightens
TDS ECO-100-2
2 lb
Western Pacific Trading S/S Locking Wire
Clam packed in 10’ coiled lengths or in a 1 lb. feeder box.
WPT 30085
WPT 30086
WPT 30087
WPT 30088
.032 x 10’ coil
.041 x 10’ coil
.032 x 1 lb box
.041 x 1 lb box
Western Pacific Trading Bronze Wool
▪▪Quality bronze wool in 3 grades
▪▪3/pkg
WPT 35000Fine
WPT 35005Medium
WPT 35010Coarse
Maintenance
Part #
TDS SIS440-B
Tear-Aid Repair Tape
Paddle Boats
Inflatable Boats
Power Boats
Sail Boats
Versatile, Easy-to-Use Mounting System and Accessories
for Leisure and Adventure Sports on and off the Water
Boating Parts & Accessories
153
BECKSON
154
BOATMATES
158
CAMCO
160
DECK-GUARD
161
GARELICK Deck Chairs
161
GREEN MARINE
161
INTELLISTEER
163
LELAND
165
LENCO
164
MARELON
166
MATWORKS
169
MOBRI
169
RAILBLAZA
170
SSI SAILING SPECIALTIES
177
SOUNDOWN
177
STAINLESS OUTFITTERS
177
SWIVL-EZE
177
TRANSAT STAINLESS
178
TURNING POINT
184
VAAVUD
190
WATERLINE DESIGN
192
WEATHERFLOW
190
WEATHERHAWK
191
154
Beckson
Beckson
Screw-Out Deck Plates
Beckson Holding Clips
These clips are nonconducting, nonmagnetic
and noncorrosive making them perfect for
indoor or outdoor use. This safety design
reduces the potential hazard for injury present
with pointed or sharp edged metal clips. 1/8”
holes are used on 3/4” centres for all sizes.
▪▪Uses #6 flat head fasteners
▪▪2/pkg
Boating Parts & Accessories
Part #
Colour
Range
BEC CLP-1/4”
Black
1/4” - 5/16”
BEC CLP-1/4”W
White
1/4” - 5/16”
BEC CLP-1/2”
Black
3/8” - 1/2”
BEC CLP-1/2”W
White
3/8” - 1/2”
BEC CLP-3/4”
Black
5/8” - 7/8”
BEC CLP-3/4”W
White
5/8” - 7/8”
BEC CLP-1”
Black
7/8” - 1-1/8”
BEC CLP-1”W
White
7/8” - 1-1/8”
BEC CLP-1-1/4”
Black
1-1/8” - 1-3/8”
BEC CLP-1-1/4”W
White
1-1/8” - 1-3/8”
BEC CLP-1-1/2”
Black
1-3/8” - 1-5/8”
BEC CLP-1-1/2”W
White
1-3/8” - 1-5/8”
BEC CLP-1-3/4”
Black
1-5/8” - 1-7/8”
BEC CLP-1-3/4”W
White
1-5/8” - 1-7/8”
BEC CLP-2”
Black
1-7/8” - 2-1/8”
BEC CLP-2”W
White
1-7/8” - 2-1/8”
Beckson Clipmate Holders
This unique design and tempered B-Flex plastic material make
Beckson’s clips the perfect way to hold brooms, racks, pumps,
flashlights, tools, blueprint tubes and other round objects neatly in
place. The patented leg design provides permanent holding spring
action unlike metal or other plastic clips, which ultimately become
fatigued. Corrosion is nonexistent.
▪▪Sold in pairs
▪▪White
▪▪Use #6 pan head fasteners
BEC CM-3/4
BEC CM-1
BEC CM-1-1/2
BEC CM-2
11/16” - 7/8”
7/8” - 1-1/8”
1-3/16” - 1-1/2”
1-1/2” - 2”
Designed to provide access without the use
of tools with a single start, non-jamming
(no cross-thread), extra strong, self-cleaning
buttress thread. They incorporate a selfaligning centre and an innovative gasket to
assure a watertight seal. A patented back-up
sealing wall leaves the plate waterproof, even if the gasket is
removed. A screw-out plate should be used in compartments where
a change in air pressure due to temperature or oil canning can
occur. Deck plates also are used for access, inspection, and clean
out for tanks and compartments.
Part #
Size
Outside
Dia.
Colour
Inside
Dia.
Cutout
BEC DP40-B
4”
Black
6-1/8”
4”
4-1/2”
BEC DP40-W
4”
White
6-1/8”
4”
4-1/2”
BEC DP40-WC
4”
Clear
6-1/8”
4”
4-1/2”
BEC DP60-N
6”
Beige
8-1/8”
6”
6-1/2”
BEC DP60-W
6”
White
8-1/8”
6”
6-1/2”
BEC DP60WC
6”
Wht/Clear
8-1/8”
6”
6-1/2”
BEC DP80-N
8”
Beige
10”
7-5/8”
8-1/2”
BEC DP80-W
8”
White
10”
7-5/8”
8-1/2”
Parts:
BEC D4S-G*
BEC D6S-G
* Request Item
4” Gasket only
6” Gasket only
Beckson Pry-Out Deck Plate
These pry-out plates were designed with an
extra heavy O-ring to assure a water tight fit.
Plates are provided with non-skid diamond
pattern. The nonskid pattern extends across the
centre, eliminating the edge ring that traps dirt
and debris. Pry-out plates should be installed
in areas where internal pressure (oil-canning) is not present.
Part #
BEC DP65-W
Size
Colour
Outside
Dia.
Inside
Dia.
Cutout
6”
White
8-1/8”
6”
6-1/2”
Beckson Twist-Out Deck Plate
Designed to conceal mounting fasteners under
the quick twist cover. The low profile cover is
self-centering, features uniquely styled finger
grips and quickly locks in place with a 1/8
twist. Three separate sealing rings assure a
watertight closure. Plates are molded of highimpact, marine quality plastic, with ultraviolet
inhibitors for prolonged service.
▪▪Use #8 FH fasteners
Part #
BEC DP50-W
Size
Colour
Outside
Dia.
Inside
Dia.
Cutout
5”
White
7”
5”
5-1/2”
155
Beckson
Beckson Vent-O-Mate
Beckson Air Scoop Vent
Powered by just a slight breeze, the Vent-O-Mate ventilator
automatically exhausts stale, hot and moisture-laden damp air from
inside a closed boat to help eliminate mildew and keep odours from
accumulating. No need to wonder why your solar powered vent
is not working. Wind moving over the open grill on top creates a
partial vacuum that literally sucks air out of the boat - removes 350
cu. ft. of air per hour with a breeze of only 6 mph. That’s enough
to completely change the air in a 30’ sailboat in about an hour.
Vent-O-Mate is also ideal for adding ventilation to heads, galleys,
and forepeaks to help prevent mildew damage to interior wood and
cabinet work. Install over anchor locker to dry wet line and prevent
musty odours below. A clear shield on
top permits light to enter and the vent can
be closed from the inside during chilly
weather to retain cabin heat. Water tight.
▪▪Overall dim: 7-3/4”
▪▪Dia: x 2-1/4”
▪▪Hole cut: 4”
Injection molded white ABS air scoops
with white KORAD® cap to prevent
cracking or discolouring. Molding
snaps on and off the included deck
mounted adapter.
W: 5-1/2” x D: 6-1/4” x H: 2-1/2”
BEC C-7
Beckson Rain Shields
The external rain shield may be fastened by screws or by
bonding to the exterior trim ring of opening
ports. This will keep out rain, spray
and provide shade. Projection from
mounting surface is 2-1/2” (6.3 cm).
▪▪White
For Port Sizes
Overall Dim
Hood Dim
BEC RS-12
Part #
5” x 12”
14-5/8”
12-3/4”
BEC RS-14
4” x 14” , 7” x 14”
6-3/4”
14-1/2”
Beckson Snap On Clam Vent
BEC RS-18
8” x 18”
20-1/8”
18.0”
▪▪Width: 5-1/2" (14.0cm)
▪▪Depth: 6-1/4' (15.9cm)
▪▪Height: 2-1/2" (6.4cm)
▪▪Adapters: Includes 4" hose
adapter for use with VT-4
BEC C-8
Beckson Custom Ports
Standard Sizes
Determining The Best Size:
It is generally best to mount the largest port for the available mounting location
for new installations. A larger port provides more light and better ventilation.
Determining Style:
The slope of the mounting location will indicate the type of port required,
NEWPORT SELF DRAIN or NEWPORT RAIN DRAIN.
Determining Required Spigot Length:
Estimate the hull or cabin wall thickness at each mounting location as
accurately as possible. Cabin wall thickness determines required port spigot
length. Both styles come in standard 1” or 2” spigot lengths.
▪▪Opening ports are CE approved
▪▪Opening ports include screens & exterior trim rings
▪▪Fixed ports include exterior trim rings
Part #
Cutout
Outside
3 x 10
3-1/2” x 10-3/8”
5-1/2” x 12-3/8”
4 x 10
4-1/2” x 10-1/2”
6-3/4” x 12-3/4”
4 x 14
4-1/2” x 14-1/2”
6-3/4” x 16-3/4”
5 x 12
5-1/2” x 12-1/2”
7-3/4” x 14-5/8”
7 x 14
7-1/2” x 14-3/8”
9-3/4” x 16-3/4”
8 RD
8-1/2” Dia.
10-3/4” Dia.
Order Coding for Opening & Fixed Ports:
Port
Type
Size
Style
Body Colour
P
O (Opening)
F (Fixed)
Lens
Spigot Lengths
3” x 10”
- (Self Drain)
4” x 10”
D (Rain Drain)
W (White)
C (Clear)
Standard Lengths
B (Black)
S (Smoked)
10 = 1” (25mm)
B (Bronze)
4” x 14”
N (Beige)
5” x 12”
S (Silver)
Except 3 x 10 = 1.25” (32mm)
7”x 14”
G (Gold)
Note - Longer or shorter spigot
lengths also available
8” RD
(Opening Only)
20 = 2” (51mm)
Examples: PO410DBS-10 = Opening port - 4” x 10” - Rain Drain - Black - Smoked Lens - 1” Spigot
PF714-WC-20 = Fixed Port - 7” x 14” - Self Drain - White - Clear Lens - 2” Spigot
Boating Parts & Accessories
BEC C-6White
BEC C-6SS
Stainless steel
156
Beckson
Beckson HT Series Access Hatches
Beckson Barrel Nuts
▪▪1/2” closed height
▪▪Weather-tight seal
▪▪Opens full 180°
▪▪Nothing to snag lines
▪▪One hand operation
▪▪Mounts vertical or horizontal
▪▪UV stabilized material
▪▪Invisible fasteners
▪▪Textured non-skid surface
▪▪Use #10 FH fasteners
▪▪Latches: 2
▪▪I.D: 11-1/8” x 11-1/4
▪▪O.D: 14-5/8” x 14-3/4”
▪▪Cut-Out: 11-3/4” x 11-3/4”
These nickel plated brass barrel nuts provide a
low profile and secure installation.
▪▪Standard or flush mount
▪▪Shank diameter: .25”
▪▪Fastener size: 10-24
Overall
Length
Finish
Mount
.375”
Chrome
Standard
BEC BB187-02-CHR
.50”
Chrome
Standard
BEC BB187-11-BLK
.375”
Black
Standard
BEC BB187-31F
.375”
Black
Flush
Part #
BEC BB187-01-CHR
Boating Parts & Accessories
BEC HT-1515-W
Beckson Winch Handle Holders
Beckson Round Fixed Port
For medium winch handles, top action.
▪▪8-1/2” x 3” x 2”
▪▪Identical in size, shape, style, mounting,
and strength as the opening ports
▪▪White body, cleat lense
▪▪OD: 8-1/8” x Cutout: 6-1/2”
BEC HH-2White
For large winch handles.
▪▪11” x 3.5” x 2.125”
BEC PF6RD-WC
Beckson Portlight Parts
BEC PRK-AW
BEC PRK-B
BEC PRK-W
BEC PRT-AB
BEC PRT-B
BEC PRT-W
Cam latch assembly - White
Cam latch - Black
Cam latch - White
Black knob assembly 1/4”-20
Black twist knob 1/4”
White twist knob 1/4”
BEC GK-310
BEC GK-410
BEC GK-414
BEC GK-512
BEC GK-714
Portlight gasket 3” x 10”
Portlight gasket 4” x 10”
Portlight gasket 4” x 14”
Portlight gasket 5” x 12”
Portlight gasket 7” x 14”
Beckson Portlight Screens
BEC SCR310
BEC SCR410
BEC SCR414
BEC SCR512
BEC SCR714
3” x 10” Screen
4” x 10” Screen
4” x 14” Screen
5” x 12” Screen
7” x 14” Screen
Beckson Eye Strap
▪▪Black plastic eye strap
▪▪5/16 eye x L: 1.9” x H: 0.675”
▪▪Flat fastening surface is designed for a
pop rivets or other flat fasteners
BEC BKT-04S-BULK
Beckson Drain Plug
▪▪Self-cleaning thread design, O-ring, and center
retaining legs to secure the center
▪▪Ideal installation for transom of personal
watercraft, small boats, fish wells, coolers, ice
chests, water tanks, etc.
▪▪Hole Cut 1” (2.54cm)
BEC DP10-B
PRK-AW
HH-3
BEC HH-3White
Beckson Can/Horn Holder
PRT-W
PRT-AB
Safety-soft flexible PVC prevents injuries. Designed to
hold beverage cans, bottles, air horns, etc. Uses screws
to mount.
▪▪4.5” x 3” x 2.75”
BEC HH-6White
Beckson VHF Radio Holder
▪▪Ideal size for the large hand held radios
▪▪6” x 3” x 2”
BEC HH-8White
Beckson Cup Holders
There is a generous cavity under the flange for
caulking, allowing installation without fasteners.
There are molded in standoffs on the bottom
of the GH33 & GH43 holders to help prevent
condensation build-up and keep containers from
sticking to the bottom. GH43 will hold 1 litre
bottles, and cans with foam insulating rings, as
well as soda and beverage cans or glasses alone.
BEC GH33W1
BEC GH43W1
3” x 3”, White
4” x 3”, White
Beckson
Beckson “Handy Mate” Pumps
Beckson “Siphon Mate” Pump
Handy-Mate pumps can pump water out of bilges, sump tanks and
from one tank to another, or pump oil from inboard or stern drive
or engine crankcases when it needs changing. A tube is provided to
insert into the dipstick hole and the oil is quickly pumped out. The
especially versatile 216PC pump come with a kit of tubes, hoses,
reducing foot and adapter. The Handy Mate
will not rust or corrode, is non-sparking for
safety, and requires no
priming to start pumping
action. The pump body
has a diameter of 1-1/2”
and it is fitted with a
comfortable molded
handle for easy, no-strain
operation.
Use for diesel, oil or water, this unit lifts 4 oz
(.12 L) per stroke. Supplied with clear tubing
to allow versatile application. Cut tubing for
desired length of intake and discharge hose.
When finished siphoning or pumping flammable
liquids, be sure to drain siphon pump of liquid
before storing. This pump not intended for
transfer of liquid over 120°F (49°C) nor solvents
that will attack PVC.
▪▪Length: 11-1/2” x diameter: 1-1/4”
Part #
BEC 212PGA
Tubes
12-3/4”
Intake: 1/4” x 30”
Intake: 1/2” x 20”
Discharge: 1” x 10” (oil)
16”
Intake: 1/2” x 36”
Intake: 1/4” x 36”
Flex discharge: 1-1/4” x 24” (water)
Discharge: 1” x 10” (oil)
A Thirsty-Mate with extra reach. This pump can be
permanently installed and will operate in any position.
It comes complete with mounting brackets, intake
hose and clamp, strainer, check valve and discharge
hose. Ideal for small boats, engine compartments and
much more.
▪▪Diameter: 1-3/4” (44 mm)
▪▪Length: 14” (35.6 cm)
▪▪Stroke: 12” (30.5 cm)
▪▪Gal/Min: 7.5 (28 L)
▪▪Outlet hose: 2’ (61 cm)
▪▪Intake hose: 6’ (1.8 m)
BEC 118PF
18”
1-1/4”
BEC 124PF
24”
1-3/4”
BEC 136PF6
36”
BEC 224PF
24”
BEC 230PF
30”
12”, Black
12”, White
Beckson Ship’s Logs
BEC MM503
All polyvinyl plastic, self priming, self lubricating,
easy cleaning and will not corrode. Manufactured in
the U.S.A. of the finest materials available. If your
hand pump becomes clogged, simply remove the foot
valve assembly and clean out the inside.
Strokes
Per Gal
BEC SM-1B
BEC SM-1W
Proven information packed format,
just like our full-size log books, in
a more convenient size for smaller
boats.
▪▪Navy
▪▪5-1/2” x 8-1/2”
Beckson “Thirsty Mate” Pumps
Dia.
▪▪Heavy duty 3” wide tread for stepping surfaces
▪▪Self-adhesive backing
▪▪Will not crack or discolour
▪▪Sold in pairs
BEC MM403
BEC 315FP6
Length
Beckson Non-Slip Tread
A complete format for recording all
information concerning your voyage
and boat's operation. Pages for trip
log, radio use, maintenance and
guest register.
▪▪9” x 11-1/2”
Beckson Flex-A-Pump
Part #
BEC 109PC
Capacity
Hose
10
6 GPM
20”
6
10 GPM
24”
1-3/4”
4
13 GPM
72”
1-1/2”
7
8 GPM
24”
1-1/2”
6
10 GPM
32”
Boating Parts & Accessories
BEC 212PC
Length
157
158
BoatMates
BoatMates Stainless Folding Beverage Holder
BoatMates GPS/Cell Caddy
Holds most hand held GPS, cell phones and
other small electronic devices. Mount with
supplied suction cups or permanently mount
with screws.
▪▪6" x 4.5" x 3.5"
BOT 2134-1White
BOT 2134-8Graphite
Boating Parts & Accessories
BoatMates Communications Caddy
Holds most hand-held VHF radios and FRS's.
▪▪4.5" x 3.5" x 2.5"
BOT 2135-1White
BoatMates Stainless Cockpit Organizer
Keep all those small personal
items convenient and safe with
the Tournament series cockpit
organizer, fabricated from polished
304 grade stainless steel. This
upscale organizer is great for
fishing gear, binoculars and other personal items. Stainless
mounting hardware included.
▪▪12.5” L x 4.5” W x 4.5” D
BOT 2213-0
BoatMates Cockpit Organizer
The Tournament Series folding drink
holder is fabricated from 304 polished
stainless steel. The space saving folding
design is also equipped with molded
silicone fingers to adjust to the varying
diameters of cans, cups, cozies and
mugs. It also has a molded silicone
“coaster” on the inside of the cover to
reduce noise and to keep containers from
sliding. Stainless steel mounting hardware is included, along with
nylon sound dampening washers for positioning between the unit
and the hull.
▪▪4.5” L x 5” W x 1” D (folded)
BOT 2211-0
BoatMates Folding Drink Holder
The new Folding Drink Holder
features double-ring collar
assembly capable of holding
both cans and cans with
cozies. With a new all-resin
design, the drink holder won’t
rust or corrode. Its injection
molded, commercial grade
resin provides superior durability, an attractive appearance and a
longer, more reliable product life. The holder can be mounted with
Tempress’ Super-Suction cups or screw mounted.
BOT 2170-22/pkg
BoatMates Drink Holder Plus
▪▪Single drink holder
▪▪Suction cup fastening
▪▪6" x 4" x 4"
BOT 2136-1White
*Sleeve not included
Holds fishing gear, binoculars, personal
items such as bait, tools, knives, etc.
▪▪12" x 6" x 4"
▪▪Two suction cup mounting
BoatMates Drink Holder w/Sleeve
BOT 2133-1White
BOT 2133-8Graphite
Holds a single drink with insulation sleeve.
▪▪3.6" x 3.5" dia
BoatMates Cruisin' Caddy
Organizer that holds your beverage, personal
items, lures, etc. Mounts vertically or on flat
surfaces. Great for small boats with limited
cockpit storage.
▪▪12" x 4.5" x 3.5"
▪▪Two suction cup mounting
BOT 2131-1White
BOT 2150-1White
BoatMates
159
BoatMates Stainless Rod Holders
BoatMates Underseat Gear Bag
This high-styled organizer has a place for
your fillet knife, pliers, baits and a convenient
shelf for extra line or scents. Stores two
rods upright. The Tournament Series™ Rod
Holders are an upscale alternative to teak
or poly-board organizers. Fabricated from
polished 304 stainless steel, with injection
molded ABS inserts to protect valuable
rods and tools. Stainless steel mounting
hardware included. Packed in clear
clamshell with mounting instructions.
▪▪11” L x 9.5” W x 3” D
Holds all mandatory safety
gear, personal items and
handheld electronics. This bag
secures over the bench seat by
a hook and loop strap fastener
strip. Large main storage, two
zippered mesh storage pockets
in the front plus a covered pocket in the centre. Constructed of 600
denier polyester with UV resistant PVC lining.
BOT 2220-0Double
▪▪13.5” L x 9.5” W x 3” D
BOT 2221-0Triple
3 Suction cups. 12" x 1.5"
BOT 2110-1
35” L x 10” W x 9” D
BoatMates Seat Organizer
Heavy mesh pocket
organizer can be mounted on
a back-to-back seat base or
on the rear of flip-flop style
seat. Made of commercial
grade coated mesh and
polyester materials. Snap
fasteners for back-to-back seats and quick release
straps for flip-flops.
BOT 3129-4
29” L x 9.5” W x 3” D
BoatMates Utility Pouch
BoatMates Safety Gear Bag
Made from marine grade fabric. Store your hand held
radio, G.P.S., cell phone, winch handle, etc.
▪▪Two suction cup mounting
Keep all your mandatory safety and
emergency gear organized in this
commercial weight ventilated bag. Holds
4 adult, and 2 childs' PFD's in main body,
plus separate storage area in lid holds firstaid supplies, safety flares, distress flag,
air horn, etc. Large mesh pocket in front
for additional storage. Bag has heavy web carrying handles, nonskid feet on bottom, and grommet openings for drainage. Nylon,
self-repairing zippers on bag and lid. D-rings on each end allow
bag to be secured to deck on boat or dinghy. Safety equipment not
included. Orange.
▪▪H: 12” x W: 21” x D: 15”
BOT 3105-4
10" x 11" x 2"
BoatMates Fender Cleats
Quickly secure fenders with a lift and
turn of the S/S cleat. Accommodates
up to 3/8" line.
▪▪Length: 3-3/4"
BOT 2201-2
BOT 3118-6
BoatMates Mesh Utility Bag
Mesh bag holds a weekends worth of dirty
laundry. Drawstring top keeps everything
inside. Comes with a utility hook for hanging,
either using the large suction cup, provided,
or mount with screws.
▪▪14” x 20”
BOT 3108-4
BoatMates Trash Bagger
Easy to mount resin frame has a hinged cover
to keep the contents from spilling. Mounts on
any smooth surface with three super suction
cups or can be permanently mounted. Uses
the typical supermarket “tee-shirt” bags or
kitchen trash bags. Bags included.
BOT 2132-1White
BoatMates Seat Pack
This commercial grade organizer has
a variety of places to store your gear.
Large central pocket can hold foul
weather gear, extra clothes or safty
gear. Each smaller exterior pockets
are sized to hold three 9” x 14” tackle
trays (not included). Easily mounts over the top of most popular
pedestal seats with heavy weight web straps and quick release
nylon hardware. Large padded shoulder strap makes carrying to
and from the boat effortless.
▪▪H: 19” x W: 13.5” x D: 6.5”
BOT 3135-4
Boating Parts & Accessories
BoatMates Hook Rack
BOT 3128-8
160
Camco
Camco Adjustable Broom
▪▪Telescopes from a full 52"
down to 24" for storage
▪▪9-1/2" soft bristled head folded
in for storage
▪▪Head adjusts to different
angles for hard to reach areas
▪▪Dustpan clips onto broom
handle for storage
CAM 43623
No more broken glassware! Revolutionary
polycarbonate glasses have the look and feel
of real glass, and the advantage of being
unbreakable.
▪▪Sold in boxed pairs
▪▪Dishwasher safe
Camco Collapsible Bucket
▪▪Opens easily to 9.25" tall & folds
to less than 2"
▪▪Zippered storage bag included
▪▪3 gallon capacity
CAM 43945
Camco TastePURE
Water Freshener
▪▪Eliminate algae and slime build-up from
drinking water tanks
▪▪Keeps stored water fresh & odour free
▪▪1 oz for each 20 gallons of water
CAM 40206
CAM 42993
Camco Collapsible Bag
▪▪Over 18” wide for ease of use with large
wash brushes
▪▪Collapses to 2-3/4” tall to fit in its own
easy to carry storage bag (included)
▪▪Extra-large 18-1/4” x 9-1/2” x 10-1/2”
bucket has a 5-gallon capacity.
CAM 42973
Camco Mini Dish Rack
▪▪Fits smaller sinks
▪▪Sloped drainer tray keeps counters dry
▪▪Drain tray snaps on top of rack for storage
▪▪9.25" x 11.5"
CAM 43511
Camco Stack-A-Plate
▪▪Non-slip backing
▪▪Use in your cabinet to keep your plates
organized, and to stop them from sliding and rattling
▪▪Set of two - one fits plates to 7-1/4"; the other to 10-1/4"
▪▪Dishwasher safe
CAM 43603**
** Limited Quantity
W
9 oz Wine glass, 2/pkg
7 oz Tumbler, 2/pkg
7 oz Juice glass, 2/pkg
22 oz Beer glass, 2/pkg
10 oz Martini glass, 2/pkg
▪▪Small size makes it easy to keep this handy duo close at hand
▪▪Whiskbroom snaps into dustpan when not in use
▪▪Hanger-hole for convenient storage
E
CAM 43861
CAM 43871
CAM 43881
CAM 43891
CAM 43901
Camco Wisk & Dustpan
N
Boating Parts & Accessories
Camco Polycarbonate Glass Sets
Deck Guard / Garelick / Green Marine
Deck-Guard
161
Garelick
N
E
W
Garelick Mariner Folding Chair
GAR 48106-61
Garelick Designer Series Padded Deck Chair
Deck-Guard Ultrasonic Bird Repellers
Deck-Guard is a simple, effective, environmentally-friendly solution
to bird-related problems such as excrement and noise. Deck-Guard is
solar powered, motion activated and maintenance free! Deck-Guard
gets rid of birds while maintaining a clean, comfortable, enjoyable,
bird-free environment.
▪▪Weatherproof: Sleek, weatherproof casing is designed to
withstand years of outdoor use
▪▪Solar Panel: 2.5” x 2.5”
▪▪Motion Sensor: Built-in PIR activates when intruder moves into
its coverage area
▪▪Motion Sensor Range: 30 ft
▪▪Power Supply: Solar with Nickel Metal Hydride
Rechargeable Back-Up Batteries (5 year lifespan):
3 (AA)
▪▪Compliance: UL and CE listed
▪▪Dimensions: 4.5/8”H x 4”W x 3.1/4”D
Predatory Bird Repeller
Utilizes 8 different types of auditory distress calls to scare away a
wide variety of birds.
For bird-related problems resulting from large flock of birds roosting
on docks, roof tops and other larger commercial properties.
▪▪8 different auditory distress calls which repeat when motion is
detected
▪▪Protects up to 70 ft
DGD DGP012169
Ultrasonic Bird Repeller
Deck-Guard utilizes ultrasonic sound waves to frighten, annoy, and
intimidate seagulls and other birds.
▪▪Ultrasound: Broadcasts at a frequency range of 10-20 Khz
▪▪Protects up to 30 ft
DGD DG10081968
▪▪Lightweight, sturdy and very comfortable
▪▪One piece canvas back with 24” (61cm) high
frame
▪▪1” thick foam padded back and thigh support
for added lumbar comfort
▪▪Seat Height: 16" (41cm)
▪▪Double leg and front cross bar frame for
stability, easy to stow
▪▪Beautifully sewn olefin woven fabric,
tastefully appointed with embroidered code
flag design and contrasting accent trim.
▪▪1” (3cm) diameter, corrosive resistant folding anodized
aluminum tube frame, poly tips
▪▪Varnished hardwood arms
▪▪Navy blue with red trim
GAR 35029-62
Green Marine
Green Marine Fuel Whistle
The “Fuel Whistle” is a simple solution to
prevent spills while fuelling. Provides an audible
signal during fuel filling which stops when an
overflow situation arises. Fits 5/8” fuel lines.
▪▪Fits all boats
▪▪Protects the environment
▪▪Easy one-time installation
WES 204
Boating Parts & Accessories
▪▪Anodized frame resists the elements
▪▪Sewn cushions and arm rests
▪▪HDPE seat and back substrates resist rot
and warpage
▪▪Eight legged frame provides extra stability
▪▪Firm resilient 3.5” (9cm) thick foam seat
▪▪Marine grade vinyl
▪▪Durable 1” (3cm) aluminum double leg
frame
▪▪Chair folds for stowage, dual locks prevent folding during use
▪▪Seat size: W: 19" x D: 15-1/2" x W: 26"
Harken Hoisters
...steering has never been this easy
Intellisteer / L’il Sucker
163
E
N
W
Intellisteer Type A
Existing Drive or Autopilot
Kit Includes:
▪▪Wireless remote pendant & control module
Key Features:
Key Features:
▪▪Can be integrated with an existing autopilot system or
standalone drive unit
▪▪When the Intellisteer Wireless Controller is steering it will
disconnect the autopilot and provide wireless control from
anywhere on the boat
▪▪When the Intellisteer Wireless Controller is not steering, the
Autopilot will function as before
IRS OCTAFINTWCFC
Intellisteer Type R
For Outboards & Kicker (Trolling) Motors
Kit Includes:
▪▪Includes wireless remote pendant &
control module, remote drive, 6' steering
cable, installation kit
▪▪Requires cable steering outboard
connection kit
Key Features:
▪▪Fits below decks
▪▪Electronic clutch disengages for manual
steering
▪▪Rotary drive system
▪▪Safety override technology
▪▪Current 1.25A typical while steering, 5A max
IRS OCTAFINTRFC
Intellisteer Type H
For Hydraulic Steering
Kit Includes:
▪▪Includes wireless remote pendant
& control module, hydraulic
pump, hydraulic hoses and fittings,
installation kit
Key Features:
▪▪Connects to all common hydraulic steering systems
▪▪Rugged Octopus hydraulic pump
▪▪Adds wireless pushbutton control of your hydraulic steering
▪▪Current 4-6A typical, 19A Max while steering
▪▪Suitable for cylinders up to 10ci (166cc)
IRS OCTAFINTHFC
Intellisteer Wireless Remote Pendant
▪▪Extra pendant to use as a spare, as a second
remote or to replace lost remotes
▪▪Water resistant
▪▪Supplied with 2 x 23A batteries
▪▪Includes neck lanyard
▪▪Handheld and receiver can be paired in field
IRS OCTAFINTHHFC
Parts:
IRS OC15SUK31A
9.9 Mercury 4-stroke linkage arm STRB
Boating Parts & Accessories
Three different models add wireless steering to boats with:
▪▪Autopilots
▪▪Tiller steered outboards
▪▪Cable steering
▪▪Hydraulic steering
▪▪Wireless receiver module plus wireless handheld pendant steering in the palm of your hand
▪▪Up to two pendants can be used
▪▪Steer and fish from anywhere on the boat
▪▪Designed for push button control
▪▪Easy DIY installation - no need for professional installer
▪▪1 year limited warranty on electronics, 2 year limited warranty
on drive units
164
Lenco
Lenco Elastomeric Tactile Trim Tab Switch Kits
Totally waterproof, maintenance-free, easy-to install tactile
switches with an over-molded connector to eliminate water
intrusion. L.E.D. indicator lights let you know exactly where your
trim tabs are at all times.
▪▪For single actuator systems only
Kits include:
• Self-contained sealed keypad
• Control box
• 36" Pigtail
Lenco Electric Trim Tabs
Boating Parts & Accessories
Lenco Electric Standard Mount Trim Tab Kits make your boat ride
smoother, drier, faster and with increased safety whether on a small
skiff or a large yacht. The Lenco ballscrew design is more reliable,
three times more powerful and features an instant response, which
makes them very user friendly compared to typical hydraulics.
Lenco fast response electric actuators are fully submersible with
all plug & play waterproof Deutsch connections. Trim Tab blades
are 12 Gauge - 304 SS with a 5/8" flared trailing edge and 1/8"
diameter hinge pin.
Part #
Boat Length
Tab L x W
LEN 15000-101
14'-18'
9" x 9"
LEN 15001-101
16'-25'
9" x 12"
LEN 15007-101
17'-30'
12" x 12"
LEN 15008-101
26’ - 36’
12” x 18”
Standard Switch 124SSR
▪▪Self-contained, sealed keypad
▪▪Self-contained, sealed control box
▪▪Fade/smudge-proof, laser engraved graphics
▪▪Plug & play switch wiring harness connectors
▪▪Built-in Retract feature returns tabs to a fully retracted position
when power or tachsignal is removed
LEN 15069-001
12 VDC only
LEN 30134-001
LEN 30006-001D
Control box for 124SSR
Replacement key pad
Parts:
Kit Contents
▪▪2 each of 12-gauge stainless steel trim tab blades
▪▪2 each of #15054-001 actuator with 6' leads and Deutsch plugs
▪▪2 each of #30133-103 20' actuator extension wiring harnesses
▪▪2 each of #15085-001 (116) upper mounting brackets with gland seal
▪▪2 each of #50014-001 (119) lower mounting brackets
▪▪1 each of the Lenco owner’s / installation manual
▪▪All necessary stainless steel mounting hardware
▪▪Switch kits sold separately
LED Indicator Switch 123SC
All the features of the standard switch above PLUS:
▪▪2 high-intensity L.E.D. indicator displays show the exact
position of your trim tabs at all times
▪▪Photo eye reads ambient light and adjusts the L.E.D. indicator
display intensity for optimum viewing in all light conditions
▪▪Backlit keypad graphics for optimum night viewing
▪▪24-volt compatibility
LEN 15070-001
12 or 24 VDC
LEN 30072-001
LEN 30007-001D
Control box for 123SC
Replacement key pad
Parts:
Switch kits sold separately
Edge Mount Trim Tab 12V Kits - No Switch
Edge Mount actuators mount at the trailing edge of the plane,
requiring 4” (10.16 cm) less transom height than Lenco standard
mount trim tabs.
▪▪2 of 12-gauge stainless steel trim tab blades
▪▪2 of #15054-001 actuator with 6’ leads and Deutsch plugs
▪▪2 of #30133-103 20’ actuator extension wiring harnesses
▪▪2 of #15085-001 (116) upper mounting brackets with gland seal
▪▪2 of #50014-001 (119) lower mounting brackets
▪▪1 of the Lenco owner’s / installation manual
▪▪All necessary stainless steel mounting hardware
Part#
LEN 15015-101
Tabs
Boat Length
Min. Transom
Height
12” x 9”
14’ - 18’
11”
Lenco Double Rocker Switch 122
For Single Actuator Systems
▪▪Double Rocker Switch available for Standard Trim Tabs,
Standard & HD Performance Tabs (single actuator sersions)
▪▪12 & 24 volt
Kit Contents:
▪▪#122 Carling Double Rocker Switch
▪▪Deutsch Conntectors
▪▪36" Power Pigtail
▪▪Installation hardware included
LEN 10222-211D
12 VDC only
Lenco / Leland
Lenco RetroFit Kit
Leland
Lenco Marine’s RetroFit kit is
designed as a direct replacement
for the Bennett hydraulic pump.
▪▪Use existing Bennett trim
planes, bracket and switch
▪▪Use all existing mounting holes
Kit Includes:
▪▪2 electric actuators
▪▪2 upper mounting brackets
▪▪Switch jump wire kit
▪▪All mounting hardware
Note: Bennett Joystick control can not be retrofitted to the Lenco Actuators.
LEN 15064-001
LOA Retracted
LEN 20766-001
LEN 20770-001
LEN 20768-001
Leland Manual Re-Arm Kits
▪▪33GR CO2
LND 840AMU-85202ZMA7174/RKM6F
LND V86160-85202Z MA7203/NRK1000
Stroke
LOA Extended
25"
8"
33"
29"
12"
41"
Leland Pins & Bobbins
25"
12"
37"
LND V85006-00006
LND V80040-00003
Accessories:
Single rocker switch for single HL
Single rocker switch for dual HL
Parts:
LEN 50015-001D
LEN 50014-001D
LND V85000-85202ZMA7270
LND V86000-85202ZMA7202
LND V90000-85202ZRKA6F
LND V85000-86121Z38ARP
LND V85000-86202Z38ARK
Stud upper bracket
Stud lower bracket
Green Indicator Pins (6/pk)
Yellow Auto Bobbins (3/pk)
Leland Xenon Strobe
USCG approved, requires 1x 'D' cell alkaline
battery to be replaced annually. Stainless locking
pin attachment fits most foam filled and inflatable
PFD’s. Three to four mile visibility at sea level
operates at 50-60 flashes per min for 8-12 hours
and then switches to 20-30 fpm for another 8-12
hours.
▪▪Omni-directional 360° view pattern
▪▪More powerful than LED bulbs
▪▪Waterproof and rugged
▪▪D-cell battery (not included) for up to 24 hours
LND 60646M
Leland Rust Prevention Bags
Reusable poly bags with an interior lined
with corrosion inhibitors which prevent
rust on steel tools and parts without using
damaging oils. Protected parts are easily
removed from the bag and are ready for
immediate use with no smell or residue.
▪▪3 Bags: 6” x 8”, 8” x 10” & 12” x 18”
LND 90100
Boating Parts & Accessories
Lenco hatch lifts are made entirely of non-corrosive
materials and are completely submersible. Inline motor
design makes mounting easier and delivers over 750 lbs.
of lift. Clutchless ball screw design always runs in sync
on dual lift applications and never binds. Stainless steel
ram locks in any position. Ballscrew spins freely when
hatch is fully opened or closed eliminating limit switches
and burned out motors. Motor draws 5 amps @ 12 volts.
Lifts install with a single power cable.
Part #
Leland Auto Re-Arm Kits
▪▪Leland is a leader for high pressure disposable gas filled
cylinders and related gas handling equipment in safety,
food, medical and recreational products
▪▪They make over 250 variations of CO2 cylinders for
inflatable vests
▪▪Approved re-arm kits and components for Mustang,
Helly Hansen, Stearns & Nautilus
Lenco Electric Hatch Lifts
LEN 15096-001
LEN 15098-001
165
166
Marelon
Forespar Thru-Hull Connectors
Precision molded in high-strength noncorrosive Marelon®. Their
great strength, light weight and complete freedom from corrosion
and electrolysis make them ideal Thru-Hull Connectors and are
available with or without strainers.
▪▪Threads: NPT
Marelon Ball Valves
Component style ball valves are precision molded in high-strength
noncorrosive Marelon. Their great strength, light weight, and
complete freedom from corrosion and electrolysis make them the
ideal valve for controlling inlet and outlet water requirements above
and below the waterline. Teflon seals are standard on all valves.
▪▪Threads: NPT
Thread
Diameter
Length
Length w/
Handle
3/4"
1-7/8"
3"
4”
MPS 905102
1"
2-3/4"
4-3/4"
5-1/2”
MPS 905103
1-1/4”
2-3/4”
4-7/8”
5-3/4
MPS 905104
1-1/2"
3-1/2"
5"
7-1/2”
MPS 905105
2"
4-1/4"
5-7/8"
8”
Part #
Boating Parts & Accessories
MPS 905101
*NOTE The “S” notation in the model description denotes ThruHull Connectors that have been fitted with a strainer.
Flush Head Threaded Thru-Hull 250
MPS 9060001/2"
MPS 906001S-1/2"
MPS 9060023/4"
MPS 906003S-3/4"
MPS 9060041"
MPS 906005S-1"
MPS 9060061-1/4"
MPS 906007S-1-1/4"
MPS 9060081-1/2"
MPS 906009S-1-1/2"
*S Denotes Screened
Mushroom Head Threaded Thru-Hull 251
Marelon Seacocks
Component style seacocks are precision
molded in high-strength noncorrosive
Marelon. Their great strength, light weight,
and complete freedom from corrosion and
electrolysis make them the ideal valve for controlling inlet and
outlet water requirements above and below the waterline. Teflon
seals are standard on all valves.
▪▪Threads: NPT
Thread
Height
w/handle
Base
MPS 904009
1/2”
3”
4”
3”
MPS 904010
3/4”
3”
4”
3”
MPS 904011
1-1/2”
5”
8”
6”
Marelon Thru-Hull Scoop Strainers
These high speed, strainers are made of high-strength noncorrosive
Marelon (available in white only). Forespar’s two-piece
construction allows for greater ease in installation.
▪▪Threads: NPT
Part #
MPS 9060101/2"
MPS 906011S-1/2"
MPS 9060123/4"
MPS 906013S-3/4"
MPS 9060141”
MPS 906015S-1"
MPS 9060161-1/4"
MPS 906017S-1-1/4"
MPS 9060181-1/2"
MPS 9060202"
MPS 906021S-2"
*S Denotes Screened
Mushroom Head Hose Barb Thru-Hull 253
MPS 9060221/2"
MPS 906023S-1/2"
MPS 9060243/4"
MPS 906025S-3/4”
MPS 906027S-1"
MPS 9060701-1/8"
MPS 906071S-1-1/8"
MPS 9060281-1/4"
MPS 906029S-1-1/4"
MPS 9060301-1/2"
MPS 9060322"
MPS 906033S-2"
*S Denotes Screened
Thread
A
B
C
D
MPS 906059
3/4"
1-1/32”
2-1/4”
1”
3-1/8”
Flush Head Threaded Drain 254
MPS 906060
1-1/4"
1-5/8”
2-15/16”
1”
3-3/8”
MPS 9060342"
MPS 906035S-2"
MPS 9060361-1/2"
MPS 906037S-1-1/2"
MPS 9060381-1/4"
MPS 906039S-1-5/8"
*S Denotes Screened
Parts:
MPS 906061
MPS 906062
3/4” Screen only
1-1/4” Screen only
167
Marelon
Marelon Tapered Pipe to Hose Adaptors
▪▪Threads: NPT
Marelon 90° Male Pipe to Hose Adaptors
Precision molded and then machined from high-strength
noncorrosive Marelon making them light in weight as well as
completely free from corrosion and electrolysis. They are ideal as
replacement parts for conventional plumbing components and are
your best choice for new installations.
▪▪Threads: NPT
A
B
C
D
E
1/2"
5/8"
7/16”
2”
1-1/2”
MPS 901001
3/4”
3/4”
1/2”
2-1/8”
1-5/8”
MPS 901003
1-1/4”
1-1/4”
7/8”
2-3/4”
2-5/16”
MPS 901004
1-1/2”
1-1/2”
1-1/16”
3-1/4”
2-3/4”
MPS 901005
2"
2"
1-1/2”
3-5/8”
3-1/4”
1/4” x 1/4”
1/4” x 5/16”
1/4” x 3/8”
1/4” x 1/2”
3/8” x 3/8”
3/8” x 1/2”
1/2" x 1/2"
1/2" x 3/4"
3/4" x 1/2"
3/4” x 3/4”
3/4” x 1”
1-1/4" x 1-1/2"
Marelon Female Threaded
Barbed Hose Fittings
MPS 901014
MPS 901015
MPS 905014
Boating Parts & Accessories
Part #
MPS 901000
MPS 910146
MPS 910147
MPS 910148
MPS 910149
MPS 910150
MPS 910154
MPS 910156
MPS 910157
MPS 910158
MPS 910159
MPS 910160
MPS 910168
1/2” FPT to 1/2” hose barb
3/4” FPT x 3/4” hose barb
1-1/2” FPT to 1-1/2” hose barb
Marelon Reducer/Adaptors
RB Series
Marelon 90° Female Pipe to Hose Adaptors
▪▪Threads: NPT
Part #
A
B
C
D
E
MPS 901006
1/2”
5/8”
7/16”
2”
1-5/8”
MPS 901007
3/4"
3/4"
9/16”
2-3/16”
1-3/4”
MPS 901008
1"
1"
5/8”
2-1/2”
1-7/8”
MPS 901010
1-1/2"
1-1/2"
1-1/8”
3-1/8”
2-3/4”
MPS 901011
2"
2"
1-9/16”
3-5/8”
3-1/4”
Marelon Pipe to Hose Adaptors
▪▪Threads: NPT
Part #
Thread
Tailpipe
A
B
C
MPS 905006
1/2"
5/8"
1”
1”
2-1/4”
MPS 905007
3/4"
3/4"
1”
1”
2-3/8”
MPS 905008
1"
1"
1-1/2”
1-1/16”
2-7/8”
MPS 905009
1-1/4"
1-1/4"
1-5/8”
1-1/4”
3-1/4”
MPS 905010
1-1/2"
1-7/16"
1-7/16”
1-1/8”
2-5/8”
MPS 905011
2"
2"
1-11/16”
1-1/4”
3-1/4”
FTC Series
MPS 901045
MPS 901046
MPS 901042
MPS 901044
MPS 901043
FTC 1/2" female
FTC 3/4" female
FTC 1” female
FTC 1-1/4” female
FTC 1-1/2” female
MPS 901040
MPS 901050
MPS 901051
MPS 901047
MPS 901048
MPS 901049
MTC 3/4”-1/2” male
MTC 3/4”- 3/4” male
MTC 1” - 3/4” male
MTC 1-1/2" - 1" male
MTC 1-1/2" - 1-1/4" male
MTC 1-1/2" - 1-1/2" male
MPS 910063
MPS 910062
RB 1-1/2” male - 3/4” female
RB 1-1/2" male - 1" female
MTC Series
168
Marelon
Marelon 'Y' Valves
Forespar ‘Y’ Valves are molded from highstrength noncorrosive Marelon and available
in 1” and 1-1/2” barb sizes. The valves
are operated by a simple 120° movement.
Positive stops are provided between positions.
▪▪Flange: 3-1/2” dia.
MPS 9020011”
MPS 9020001-1/2”
Marelon Vented Loops
Spare parts:
Precision molded in high-strength noncorrosive Marelon, neither
vent nor loop will corrode. The duckbill one-way valve is designed
to seal properly if particulate matter is present in fluids.
Boating Parts & Accessories
Part #
Barb
Height
Width
MPS 903008
1/2"
5-1/4”
4-1/4”
MPS 903003
5/8"
4-1/2”
4”
MPS 903001
3/4"
4-1/2”
3-3/4”
MPS 903007
1”
7”
9”
MPS 903000
1-1/2"
5-1/4”
7-3/4”
MPS 903002
MPS 902006
Repair kit
Marelon Threaded Valve
These valves are designed to meet the needs of
builders who require the benefits of the Marelon®
integrated plumbing system, with
female threads. This valve works
great with A.N.P. Thru-hulls.
MPS 9333421/2”
Replacement vent cap
Marelon Valve w/Flush Thru Hull
These valves are designed to meet the needs of builders who
require the benefits of the Marelon® integrated plumbing system,
with female threads.
▪▪Straight hose barb
MPS 9321433/4”
MPS 9321441”
MPS 932146
1-1/2”
907013
907028
907000
Marelon Sink Fittings
907014
Marelon® Sink Drains are designed for 1” and 3/4” I.D. hoses and
are available in Straight and 90° configurations. Noncorrosive.
Model
Tail
Flange
Cut-Out
MPS 907000
Part #
SW-1
Straight 1" hose
1-3/4"
1-5/16"
MPS 907014
SW-2
90° 1" hose
1-3/4"
1-5/16"
MPS 907013
SW-5
Straight 3/4" hose
1-3/4"
1-5/16"
MPS 907028
D-1
Straight 1" screw
-
-
Marelon 'Y' Connectors
End plates may be removed
for blockage relief. O-ring seal
ensures leak free performance and
is safe under working pressures
up to 80 P.S.I.
Available with or without mounting flange.
▪▪Flange: 3-1/2” dia.
MPS 902002
MPS 902003
MPS 902004
MPS 902005
1” With flange
1” No flange
1-1/2” With flange
1-1/2” No flange
Marelon Valve w/Flush Thru-Hull
These valves are designed to meet the
needs of builders who require the benefits
of the Marelon® integrated plumbing
system, with female threads.
▪▪90° hose barb
MPS 9321533/4”
Marelon Tank Vent
For hulls with solid cores only. Unit press-fits into
3/4” dia. hole without the need of a nut. Stainless steel
screen will not corrode and has no plating to chip.
These vents are precision molded in high-strength
noncorrosive Marelon making them completely free
from corrosion and electrolysis.
▪▪Height: 7cm
▪▪For 5/8” hose
MPS 907029
Marelon / Matworks / Mobri
Marelon Garboard Drain
169
Matworks
For newer, thicker transoms, this drain and plug
assembly fits up to 1-3/4" thick applications. Made of
precision molded Marelon.
MPS 906081
3/4" thread
Matworks Entrance Mats
Marelon Drain Plug
Welcome Aboard in navy 18" x 30"
Typically used for transom drains, these
high quality plugs are precision molded
in high-strength noncorrosive Marelon
and fitted with a neoprene seal and
stainless steel retainer.
▪▪Fits 1” drainage hose
MFM M10050
MPS 907001
Welcome Aboard in blue half moon
shape, 18" x 36."
Molded in high-strength noncorrosive Marelon®
for lifetime durability. Clearly marked for use
with water. Easy-open cap is fitted with nylon
retaining cord and rubber O-ring to ensure a
safe and efficient seal. Hose: 1-1/2”, Flange: 4”,
Cutout: 2-1/8”, Length: 3”
MPS 907003Water
MPS 907004Waste
Marelon Well Drain
Precision molded from acetyl resin (Delrin®)
these are corrosion proof, and easy-to-install.
They can also be used for other applications
such as a chafe guard to lead hose, wiring,
steering cables, etc. through bulkheads, floor
timbers and fibreglass panels. Barbs on O.D.
ensure positive locking action. Fits 1” hole, flange is 1-1/4” dia.
MPS 9070062-1/2”
Welcome Aboard in navy 10” x 22”
MFM 10080
Boat Shoes Only in navy 18" x 24"
MFM 10090
Mobri
Mobri Radar Reflectors
Offers a compact lightweight design by using 40
pieces of aluminium arranged at 90 degrees and
staggered at 45 degrees. It provides a radar cross
section of 2 square meters. Noiseless, light weight,
low windage with less chance of chafe to the sails
and rigging.
MOB S-2-B
MOB S-2-W
MOB S-4-B
2” x 23”, Black
2” x 23”, White
4” x 23”, Black
The Mobri M-2 radar reflector comes with a
tilting bracket which makes this model especially
appropriate for powerboats. It has the same
construction as the S-2, offering the same radar
cross section of 2 sqm. It can be laid down, is
easy to remove, noiseless, light weight and is low
windage.
MOB M-2-B
2” x 23”, Black
The Mobri M-3 and M-4 are designed with a
mounting bracket and are best suited for use with
power boats. The best performance is achieved
when the Mobri radar reflector is mounted in a
vertical position as high as possible over the deck,
away from the “shadow” of other equipment such
as antennas.
▪▪For power boats and inflatable’s
▪▪Easy to remove, just twist out and stow
▪▪Very low noise
▪▪Light weight
▪▪Low windage
MOB M-3-B
MOB M-3-W
MOB M-4-B
MOB M-4-W
4” x 15”, Black
4” x 15”, White
4” x 20”, Black
4” x 20”, White
Boating Parts & Accessories
Marelon Deck Fills
W
E
MFM 10010
N
High end, highly fade resistant, rubber
backed, jet printed entrance mats.
170
Railblaza
Boating Parts & Accessories
CHOOSE A MOUNT
Railblaza StarPort Mounts
The RAILBLAZA StarPort is a unique and versatile mount used in
a huge number of applications. The StarPort allows users to fit and
swap out our full range of RAILBLAZA accessories. Made from
high grade engineering plastics, the StarPort is easy to fit and stylish.
It can be surface or recess mounted on power boats, inflatables, sail
boats, kayaks, ATVs, garages and many other applications...
RBZ 03-4001-11
RBZ 03-4001-21
Black, 2/pkg
White, 2/pkg
RBZ 03-4015-11
RBZ 03-4015-21
Black, each
White, each
▪▪StarPorts can be horizontally or vertically mounted in minutes
▪▪Low profile surface mount & minimal depth when recess mounting
▪▪Includes a stylish locking slide for securing accessories firmly in place
▪▪Gasket and bung reduces water ingress
Railblaza SidePort Mounts
Railblaza StarPort Rail Mounts
If you need to mount on a vertical surface, but
require a horizontal socket (or vice versa), the
SidePort is the mount for you. It's ideally
suited for gunwales of smaller aluminium
boats or vertical cockpit wells on
kayaks.
The RailMount series from RAILBLAZA will now
fit anything from a 19mm light rail on a sailboat, to a
heavy 41mm aka rail on a Hobie outrigger.
▪▪Fits sizes (19, 20, 25, 32 and 41mm round, and 32mm square)
▪▪No clearance required underneath
▪▪Greater gripping power with the addition of grip tape.
RBZ 03-4014-11Black
RBZ 03-4014-21White
Rail Mount 19-25 Adapters
W
▪▪Stylish, low profile, four screw base mount
▪▪Same footprint as the Scotty, RAM, Cannon and Fish-On
▪▪Allows attachment of any RAILBLAZA accessory
▪▪Locking slide locks accessories in place
▪▪Fasteners not included
▪▪Made in New Zealand
E
N
Railblaza StarPort Rail HD
▪▪Fits 3/4”-1’’ (19 mm - 25 mm) round rail
RBZ 03-4003-11
RBZ 03-4003-21
Railmount only, Black, 2/pkg
Railmount only, White, 2/pkg
RBZ 03-4011-11
RBZ 03-4011-21
Railmount & Starport, Black, each
Railmount & Starport, White, each
RBZ 03-4046-11
HD TracMounting Kit
The StarPort HD can also be centrally mounted
on many popular track systems, with the added
versatility of tool-free adjustment. Just open up the central
screw-hole bosses with a drill.
RBZ 03-4109-11
Rail Mount 32-41 Adapters
▪▪Fits round 1-1/4" (32 mm) & 1-5/8" (41 mm) rails and
square 1-1/4" (32 mm) rails
Railmount only, Black, each
Railmount only, White, each
Railblaza RIBPort Mounts
RBZ 03-4013-11
RBZ 03-4013-21
Railmount & Starport, Black, each
Railmount & Starport, White, each
Add useful StarPort attachments to
your inflatable without having holes cut
into the tubing. Comes complete with
StarPort, and suitable for both PVC and
Hypalon tubes. Completely compatible
with all StarPort accessories.
▪▪6" x 4.5"
Railblaza TracPort Kayak Pack
RBZ 03-4004-11
RBZ 03-4004-21
RBZ 03-4004-51
RBZ 03-4104-11
W
E
Black, each
White, each
Grey, each
N
RBZ 03-4012-11
RBZ 03-4012-21
▪▪The TracMount kit allows you to attach
StarPorts to leading brand Kayak
tracks.
StarPort not included
171
Railblaza
ADD AN ACCESSORY
Railblaza Screengrabba II iPad/Tablet Holder
04-4020-11
▪▪Wider adjustment to hold a greater variety of tablet sizes
▪▪Allows portrait & landscape viewing (landscape only for
tablets over 10")
▪▪Will hold more dry cases, both hard & soft designs
The Rod Holder II is robust, versatile, and value for money, it
will hold your rod, you choose which position.
▪▪Rotating collar helps reduce 'strike-theft'
▪▪Rear gimble lock reduces rod rotation for compatible rods;
lift to slide rods through
▪▪Fully adjustable 360° around, 90° vertical
▪▪Easy access to reel when in position
▪▪Square-tooth tilt stops rotational slipping
Screengrabba II only
Screengrabba II w/starport mount
RBZ 02-4020-11
RBZ 02-4020-21
Black rod holder only
White rod holder only
Railblaza Rod Holder II Kit
Railblaza Mobi Holders
RBZ 04-4055-11
Black rod holder with HD StarPort mount
W
E
Railblaza Drink Holders
Can be mounted in either horizontally or vertically-mounted
StarPorts, to hold mugs, stubbies, wine glasses, even cell phones.
The extendable fingers hold the taller items in
place, yet everything collapses into a convenient
flat pack for storage.
RBZ 02-4033-11Adjustable
RBZ 02-4034-11Fixed
RBZ 02-4013-11
RBZ 02-4013-21
Railblaza Mobi Holder Kits
Black drinkholder only
White drinkholder only
Drink Holder Kits
▪▪Includes StarPort
RBZ 04-4033-11Adjustable
RBZ 04-4034-11Fixed
Black rod holder with StarPort mount
White rod holder with StarPort mount
N
▪▪Mobile Device Holder, or “Mobi” for short,
is ready to look after your phone, GPS, VHF,
EPIRB or other mobile device
▪▪The spring loaded arms are sufficient for
most applications, with neoprene rubber
pads to give high gripping power
▪▪A UV stabilised, eurethane rubber retaining
strap ensures your device goes nowhere
▪▪Available in 2 models, the adjustable Mobi
tilts and can be mounted any way you like
RBZ 04-4020-11
RBZ 04-4020-21
Fixed
RBZ 04-4008-11
RBZ 04-4008-21
Black drinkholder with StarPort mount
White drinkholder with StarPort mount
N
W
E
Railblaza Mobi Adjustable Mounts
▪▪Allows tilt angles for optimum viewing
RBZ 02-4018-11** Black mount only
Railblaza Mobi Fixed Mounts
▪▪Perfect for low-profile wall or dash mounting
RBZ 02-4019-11** Black mount only
** Limited Quatities
Railblaza Drink Holders
DrinkHolds can be easily mounted into a vertical or
horizontal StarPort and will hold anything from drink
bottles to coffee mugs along with the ability to
hang fishing lures or store pliers.
▪▪Available with or without Starport
RBZ 02-4048-11
RBZ 02-4048-21
Black, each
White, each
Drink Holder Kits
RBZ 04-4048-11
RBZ 04-4048-21
Black, with StarPort mount
White, with StarPort mount
Boating Parts & Accessories
RBZ 02-4045-11
RBZ 04-4045-11
04-4055-11
Railblaza Rod Holder II
172
Railblaza
E
N
W
Railblaza Rotating Platforms
The ideal mount if you need the ability to easily remove your
sounder or navigational aid. Once locked into a StarPort the
platform can be turned a full 360°.
RBZ 02-4021-11
RBZ 02-4022-11
Railblaza ROKK Multi Purpose Mount
▪▪The Rokk is a robust ball joint system
▪▪The bottom plugs into any port, and the top will receive any
RAILBLAZA accessory
▪▪Add a platform and it will hold heavier sounders and GPS plotters
▪▪The metal on metal ball and socket system gives ultra high
clamping force with zero loss of clamping force over time
▪▪Engineered to withstand high shock loading, tilt 270°, 360°
rotation
4" x 4", each
6" x 3", each
▪▪Can be used for attaching depth sounders,
small tackle boxes, small bait boards and
many other kayak accessories
▪▪Easily removed for stowing when not required
▪▪L: 3.9" x W: 2.56" x H: 3.27"
Black platform only, each
White platform only, each
W
E
RBZ 02-4002-11
RBZ 02-4002-21
RBZ 03-4051-11
N
Boating Parts & Accessories
Railblaza Platform Mounts
Railblaza Platform Mount Kits
RBZ 04-4002-11
RBZ 04-4002-21
Railblaza Camera Mount Adapter
Black platform with StarPort mount, each
White platform with StarPort mount, each
▪▪This adaptor will fit all cameras with a
1/4-20 thread insert allowing them to
become StarPort compatible
▪▪Then to mount it on almost any surface
just add the correct RAILBLAZA mount
▪▪Also includes GoPro Tripod adaptor to suit most action
cameras on the market
RBZ 02-4053-11
Railblaza Three Axis Platform
N
W
E
With two swivel points and a tilt adjustment you can rotate, tilt
and change the view from landscape to profile. Can be mounted
on vertical or horizontal surfaces, but really comes into it's own
if you have a sloping surface and need your display on a different
angle. Made from high density polyethylene, fixing items to it can
be as simple as screwing a self tapping screw directly into it.
▪▪102mm x 102mm
RBZ 02-4025-11
Length
Device
Limit
Weight
RBZ 02-4036-11
700 mm
0.8 kg
390 gr
RBZ 02-4037-11
340 mm
2.5 kg
320 gr
W
Part #
E
▪▪5 adjustment axes, the 5th axis is for "horizon
correction", so if the Boom is mounted on a
sloping surface you can still get the horizon
level with a quick tweak of this 5th joint
▪▪All friction joints are factory set, no need to
tighten any joints
▪▪The top platform is fully removable
▪▪Satin black anodised finish
▪▪Camera Screw Thread: 1/4" BSW
▪▪Platform Size: 100mm x 100mm (4" x 4")
N
Railblaza Pro Series Platform Booms
Railblaza Camera Mount Kit
▪▪Includes 3 axis knuckle joint, camera mount adapter
(see below) and GoPro tripod adaptor
▪▪Kit allows you to adjust your camera to every angle
▪▪Factory set friction joints keep your camera steady
RBZ 02-4054-11
Railblaza
173
Railblaza Telepole
▪▪Compresses to 22" and expands to 41"
▪▪A male StarPort adaptor at one end and a
female StarPort at the top end
▪▪Attach a NAVISAFE 360 LED Navi Light
(#055 or #355)
▪▪Fits into any StarPort, SidePort,
RailMount or RIBPort (#525)
▪▪The telescopic pole also fits many anchor
winches and winches
Railblaza Fillet Table II
RBZ 02-4035-11
Improved design includes:
▪▪Knife storage - at the back for safety
▪▪An all-round drain that stops spill from the front
▪▪No front lip to get in the way while filleting
▪▪Easy-fit overboard drain
▪▪525 mm x 350 mm
RBZ 02-4024-11
Railblaza Extenders
Railblaza Fillet Table II Kit
▪▪StarPort extenders plug into any StarPort, and have the same
star shape on top giving you 12.5 cm of clearance from the
StarPort
▪▪Adjustable extender has one pivot that allows full-circle free
rotation (under resistance) along the central axis. It also has a
central knob to adjust for up to 180° tilt in 15° increments
Full Kit Includes:
▪▪1 x fillet table/bait board
▪▪2 x adjustable platforms
▪▪2 x StarPorts
▪▪2 x surface mount adapter rings
▪▪2 x weather-tight gasket/covers
▪▪8 x 10g x 20 stainless steel screws
▪▪4 x 12-gauge 32 mm self-tapping screws
▪▪4 x (M6 x 32 mm) bolts, washers & nuts
RBZ 03-4016-11Fixed
RBZ 03-4017-11Adjustable
E
N
Railblaza Swivel Port
W
▪▪The SwivelPort is designed to allow accessories
to be easily rotated 360 degrees
▪▪Factory set friction joint
▪▪Can be attached to any StarPort, SidePort,
RIBPort or RailMount and will receive any
RAILBLAZA accessory
RBZ 04-4024-11
W
E
N
RBZ 03-4042-11
E
N
W
Railblaza Attachment Adapters
RAILBLAZA attachment adapators are designed to make many
items StarPort compatible. You can also bolt the 2 adaptors
together to make a male to male fitting.
The male to male fitting has been used to create a detachable
system for tubes on kayak sailor kits & outriggers & has many
other applications.
RBZ 02-4043-11
Black, pair
Railblaza Adapters
Attach it to any item you want, to make it
StarPort-compatible.
RBZ 02-4017-11
RBZ 02-4017-21
Black, 2/pkg
White, 2/pkg
Boating Parts & Accessories
Basic Kit Includes:
▪▪1 x fillet table/bait board
▪▪2 x Adjustable platforms
▪▪8 x 10g x 20 stainless steel screws
Railblaza Stowpod Holders
▪▪Holds pliers, keys, lures, phones, VHF's, binoculars,
drink bottles, sunblock, mugs & much more.
▪▪Movable drink holder partition
▪▪Mounts into any vertical or horizontal StarPort or
can be permanently fastened in place
▪▪Mounts on rails or inflatables by adding other
applicable RAILBLAZA mounts
▪▪Easily removed and stowed when not in use or
transferred to another position
RBZ 02-4040-11Black
RBZ 02-4040-21White
174
Railblaza
E
N
W
Railblaza Bimini Supports
This support is designed to secure
biminis, canopies and covers to your
boat, with the advantage of being easily removed using the StarPort system.
The CleatPort gives you a tie off point for stern lines and bow lines
on small craft. The StarPort gives the extra functionality of adding
any RAILBLAZA accessory. Also included is a backing plate
designed to keep stainless fastenings isolated from aluminium decks
to avoid corrosion. Comes with all stainless fasteners.
RBZ 03-4044-11Black
RBZ 03-4044-21White
W
E
N
Boating Parts & Accessories
Railblaza Cleatport
RBZ 02-4032-11
Railblaza G-Holds
▪▪Holds various sizes of poles, oars and paddles
▪▪The flexible quick-release strap has two
securing points for minimum and maximum
diameters, providing strong retention
RBZ 02-4006-11**
RBZ 02-4006-21**
RBZ 02-4007-11**
RBZ 02-4007-21**
RBZ 02-4008-11**
RBZ 02-4008-21**
** Limited Quatities
Railblaza Cleatport/Ribmount
Black, 2/pkg
1-1/4" dia (35mm), Black, 2/pkg
1-1/4" dia (35mm), White, 2/pkg
2" dia (50mm), Black, 2/pkg
2" dia (50mm), White, 2/pkg
3" dia (75mm), Black, 2/pkg
3" dia (75mm), White, 2/pkg
The CleatPort RIB Mount gives you a tie off point for stern lines and
bow lines on small craft. The StarPort gives the extra functionality
of adding any RAILBLAZA accessory. Comes with a PVC RIB Port
and all stainless fasteners.
RBZ 03-4049-11Black
RBZ 03-4049-21White
W
E
N
Railblaza Hook 25
▪▪1" diameter eye
RBZ 02-4004-11
RBZ 02-4004-21
Black, 2/pkg
White, 2/pkg
Railblaza Eye 25
Railblaza Rowlocks
Rowlock Pairs attach to the oar itself, and clip in and
out of a RIBPort. By positioning a pair of RIBPorts in
place of the usual rowlocks on your small inflatable
or RIB, it becomes a matter of simply clipping out
your oar to clear the tube, and then you can clip in any
RAILBLAZA accessory.
StarPort-compatible.
RBZ 02-4047-11
RBZ 02-4047-21
Black, 2/pkg
White, 2/pkg
▪▪1" diameter eye
RBZ 02-4003-11
RBZ 02-4003-21
Black, 2/pkg
White, 2/pkg
Railblaza Web Eye 30
▪▪1-1/4" oval eye
▪▪Crafted for webbing straps to
reduce fold over
RBZ 02-4005-11
RBZ 02-4005-21
Black, 2/pkg
White, 2/pkg
Railblaza
W
E
W
Shown with mount kit
03-4110-11
(see below)
N
E
The new NaviLux 360° light offers Cree Technology.
The single Cree LED gives off 110 lumens of light
▪▪Powered by 3 x AA batteries (not included)
▪▪Operating time of 20 hours at full brightness
▪▪Designed to meet US Coastguard 2nm standard
(approval pending)
▪▪Removable light shield included
N
Railblaza NaviLux 360 Light
175
Railblaza
Propane/Dive Bottle Holder Kit
RBZ 02-5003-11
N
E
W
Can be mounted at different spacing’s to hold Dive bottles , Gas
bottles or even Jerry cans. Supplied with 38mm strap and detachable
buckle for secure retention. Also supplied with Star adaptors to
enable the brackets to be installed into any Starport to allow easy
removal for stowage or transfer to other Starports.
RBZ 02-4056-11
W
E
Everything in one kit to give day and night visibility
when on the water in your kayak or canoe. The
TelePole can also be retasked to carry a GoPro
camera or similar on top during daylight hours.
Kit includes:
▪▪TelePole extendable from 550mm (21.65") to
1050mm (41.3")
▪▪Orange visibility flag
▪▪NaviLux 360 kayak light
▪▪Directional light shield
▪▪StarPort and stainless steel mounting fasteners
Railblaza
TracPort 500 Gas/Dive Bottle Mount
RBZ 04-4041-11
RBZ 03-4110-11
Supplied as a 500mm length of track with track nuts fitted ready
to receive the Dive/Gasbottle brackets. This track allows easy
positioning of the brackets to allow for adjustment for different size
Dive and Gas bottles. Fastenings included.
Railblaza Flag Whip & Pennant
▪▪Light, mobile & flexible
▪▪Ideal for kayaks
▪▪Increase visual presence on the water
▪▪Comes with 300 x 150 mm pennant
▪▪Easily removed for transporting
▪▪Can be re-tasked to fly a dive flag, by rolling up the existing
pennant and sliding the sock the dive flag over the top
▪▪Overall length: 46"
RBZ 02-4010-11
Flag whip and pennant only
Flag Whip & Pennant Kit
RBZ 04-4009-11
Railblaza
Dive Bottle Holder Kit
▪▪Take care of your air and add functionality to your boat.
▪▪Comes with the Railblaza Dive Bottle pad, (2) StarPort
WebEye30s - use them to mount the Dive Bottle pad and
strap dive bottles in, or when the pad isn’t needed, re-task the
StarPorts with any other Railblaza StarPort attachments
▪▪H: 150 mm x W: 200 mm
RBZ 04-4004-11
Includes (2) StarPort mounts
Includes StarPort mount
W
E
N
Railblaza Aluminum Flag Pole
Light and strong, whether you need to mount a diving
flag or just proudly display your allegiance to your
club, sport, country or hoist the Jolly Roger.
▪▪Easily removed for stowing
▪▪Fits into StarPort-enabled rails or surfaces
▪▪Also mounts into common top-handle sailboat winches
▪▪Overall length: 32"
RBZ 02-4009-11
Flag pole only
Railblaza Wall Sling
▪▪Storage of a wide range of watercraft including
SUPs, canoes, windsurfers and kayaks
▪▪The StarPort Wall Sling will free up space in
your garage, shed or yard
▪▪Installed in minutes and supplied with StarPorts,
slings, adjustment buckles and screws
RBZ 04-4050-11
Boating Parts & Accessories
N
Railblaza Kayak Visibility Kit
176
Railblaza
Railblaza TracPort Dash Series
The TracPort Dash 350 turns one StarPort into three. TracPort Dash
500 turns two StarPorts in to four. Extra StarPort TracMounts can be
purchased separately (see TracMount kit below)
TracPort Dash 500
▪▪Includes 500mm Trac with 4
StarPortsinstalled and 2 attachment adaptors
RBZ 03-4102-11
TracPort Dash 350
▪▪Includes 350mm Trac with 3 StarPorts
installed and 1 attachment adaptor
RBZ 03-4103-11
Boating Parts & Accessories
Railblaza TracMount Kit
▪▪Includes a StarPort mount & TracNut
RBZ 03-4101-11each
Railblaza TracPort Starter Pack
▪▪Backbone of your engine room or storage area
▪▪Provides a strong, versatile framework to hold battery switches,
pumps, fuel filters, black boxes, and a lot more
▪▪TracPort is 100% StarPort compatible, add, move and remove items
on TracPort
▪▪Add G-Holds hooks eyes or webeyes
▪▪TracPort are joinable (see Joiner Kit below)
▪▪Comes with mounting feet, bolts, infill and endcaps
RBZ 01-1105-61
RBZ 01-1110-61 500 mm
1000 mm
Railblaza TracMount Kit
Can be positioned at any point within your TracPort system
allowing the full range of StarPort accessories to be used.
▪▪Includes a StarPort mount & TracNut
RBZ 03-4101-11each
Railblaza TracPort Mount Pads
▪▪May be positioned at any point on the TracPort extrusion at 90° orientations
▪▪Equipment may be screwed or bolted into the pad. For larger equipment,
two or more pads may be used to bridge the equipment along the extrusion,
or for heavier equipment, across pads on neighbouring extrusions.
▪▪Includes mount pad & TracNut
RBZ 01-2001-11
RBZ 01-2002-11 102 mm x 102 mm
150 mm x 70 mm
TracPort TracNuts
Connects the TracPort with a mounting accessory, like a mount pad or StarPort
RBZ 01-2003-112/pkg
TracPort Mount Pads
RBZ 03-4009-11** 102 mm x 102 mm, each
RBZ 03-4010-11** 150 mm x 70 mm, each
**Limited Quatities
Railblaza Endcap Joiner Kit
▪▪Allows you to add another extrusion inline with an existing TracPort
▪▪Includes foot, joiner and endcap
RBZ 01-2004-11
Soundown / SSI / Stainless Outfitters / Swivl-Eze
Soundown
177
Stainless Outfitters
Soundown Noise Reduction
10-35 dBA noise reduction. 1" and 1-1/4"
thick barrier consisting of a layer of fire
retardant foam with a 1 mil reflective, easy
to clean, chrome polyester facing and a layer
of 1 lb./sq.ft. lead substitute. Use for larger
gasoline and all diesel engines for maximum quieting. Use a double
layer for severe applications (up to 50 Db noise reduction).
Do not use in areas where temperature exceeds 250°F.
No.
Thickness
SOU 54X32X1
32" x 54"
1"
SOU 54X72X11/4F
54" x 72"
1-1/4" w/facing
Parts:
SOU HPA25K
Aluminum insulation pin & keeper, 2-1/2"
Universal fit outboard motor hoist capable
of lifting up to 150 lbs. All stainless steel
construction with a 3:1 block lifting ratio.
Order with or without rope.
STA HANDI
STA HANDI-RP
With rope package
Swivl-Eze
2” x 108’ mylar
2” x 216’ mylar
2” x 125’ SCRIM mylar
SSI
W
SOU HTA20S
SOU HTA20L
SOU HTA20SC
E
Mylar tape is a 2” wide self adhering
product for finishing sound barrier
installations. The SCRIM version has the
same texture as the faced sound barrier for
a professional looking finish.
N
Soundown Mylar Tape
Swivl-Eze Deck Master Ski Pylon
▪▪Constructed with 1" stainless steel tubing
▪▪Quick disconnect hitch pin system for easy
assembly and removal
▪▪33" to 51" telescoping brace arms allow for
fitting to most boats
SWI 96009
SSI Universal Mast Boots
▪▪Made of extremely flexible UV resistant vinyl
▪▪Fit many sizes of masts with deck collars of the same basic shape
▪▪Molded in steps so top and bottom can be cut at the level that
provides a snug fit to the mast and deck collar
▪▪Boot may be installed on stepped masts
▪▪Secure top and bottom of boot with stainless steel hose clamps
(Sold separately)
SSI 91000000
SSI 91200000
SSI 91400000
SSI 900-088
SSI 900-096
SSI 900-104
SSI 900-128
SSI 900-152
SSI 900-188
Masts to 17-1/2”, collar to 31”
Masts to 23”, collar to 37”
Masts to 30”, collar to 44”
Clamp, 13.15” to 18.8”
Clamp, 14.1” to 20.4”
Clamp, 15.6” to 22”
Clamp, 20” to 26.6”
Clamp, 25.5” to 31.4”
Clamp, 32.7” to 38.4”
SSI Instrument Cover
Weather resistant capped ABS plastic
cover fits Datamarine instruments.
SSI 55008009
5” diameter
Boating Parts & Accessories
Size
Stainless Outfitters
Handi-Lift
178
Transat Stainless
Transat Stainless
Spring Hook
Transat Stainless
Carbine Hook With Grommet
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Part #
Gauge
Eye
Gate
Part #
Length
Gate
Eye
Break Load
TMS S-8150-050
2”
7/16”
1/4”
400 lbs
2”
7/16”
1/4”
400 lbs
TMS S-2451-050
2”
3/16”
9/32”
1/4”
600
TMS S-8150-050-P
TMS S-2451-050-P
2”
3/16”
9/32”
1/4”
600
TMS S-8150-070
2-3/4”
15/32”
15/32”
1700 lbs
2-3/4”
15/32”
15/32”
1700 lbs
TMS S-2451-060
2-3/8”
1/4”
9/32”
5/16”
800
TMS S-8150-070-P
TMS S-2451-060-P
2-3/8”
1/4”
9/32”
5/16”
800
TMS S-8150-100
4”
3/4”
19/32”
3000 lbs
TMS S-8150-100-P
4”
3/4”
19/32”
3000 lbs
TMS S-2451-080
3-1/8”
5/16”
13/32”
TMS S-2451-080-P
3-1/8”
5/16”
4”
3/8”
TMS S-2451-100
TMS S-2451-100-P
Boating Parts & Accessories
Size
Break
Load
7/16”
1,000
13/32”
7/16”
1,000
1/2”
17/32”
1,500
4”
3/8”
1/2”
17/32”
1,500
TMS S-2451-120
4-11/16”
7/16”
11/16”
23/32”
2,000
TMS S-2451-120-P
4-11/16”
7/16”
11/16”
23/32”
2,000
Transat Stainless
Spring Hook
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Part #
Size
Gauge
Eye
Gate
TMS S-2453-06
2-3/8”
1/4”
11/32”
19/32”
TMS S-2453-06-P
2-3/8”
1/4”
11/32”
19/32”
TMS S-2453-08
3-7/32”
5/16”
7/16”
11/16”
TMS S-2453-08-P
3-7/32”
5/16”
7/16”
11/16”
TMS S-2453-10
4”
3/8”
19/32”
13/16”
TMS S-2453-10-P
4”
3/8”
19/32”
13/16”
TMS S-2453-12
4-3/4”
1/2”
11/16”
7/8”
TMS S-2453-12-P
4-3/4”
1/2”
11/16”
7/8”
Transat Stainless
Open Hook
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Length
Gate
Eye
Break Load
TMS S-8151-050
Part #
2”
7/16”
1/4”
400 lbs
TMS S-8151-050-P
2”
7/16”
1/4”
400 lbs
Transat Stainless
Swivel Snap Shackles
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Size
Length
Break Load
TMS S-8291-12
Part #
1/2”
2-3/4”
3,000 lbs
TMS S-8291-12-P
1/2”
2-3/4”
3,000 lbs
TMS S-8291-16
5/8”
3-1/2”
6,000 lbs
TMS S-8291-16-P
5/8”
3-1/2”
6,000 lbs
TMS S-8291-22
7/8”
5”
8,300 lbs
TMS S-8291-22-P
7/8”
5”
8,300 lbs
Size
Length
Break Load
TMS S-8294-12
1/2”
2-3/4”
3,000 lbs
TMS S-8294-12-P
1/2”
2-3/4”
3,000 lbs
TMS S-8294-16
5/8”
3-1/2”
6,000 lbs
TMS S-8294-16-P
5/8”
3-1/2”
6,000 lbs
TMS S-8294-22
7/8”
5”
8,300 lbs
TMS S-8294-22-P
7/8”
5”
8,300 lbs
Transat Stainless
Swivel Snap Shackles w/Pin
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Part #
179
Transat Stainless
Transat Stainless
Fixed Snap Shackles
Transat Stainless
Swivel Jaw & Jaw
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Part #
Size
Length
Break Load
TMS S-8292-12
1/2”
2-1/8”
3,000 lbs
TMS S-8292-12-P
1/2”
2-1/8”
3,000 lbs
TMS S-8292-16
5/8”
2-3/4”
6,000 lbs
TMS S-8292-16-P
5/8”
2-3/4”
6,000 lbs
TMS S-8292-22
7/8”
4”
8,300 lbs
TMS S-8292-22-P
7/8”
4”
8,300 lbs
Transat Stainless
Fast Eye Fixed Boat Snaps
Size
Length
Eye
Gate
TMS S-249-0
Part #
0
2-1/8”
18/32”
15/32”
TMS S-249-0-P
0
2-1/8”
18/32”
15/32”
TMS S-249-1**
1
2-13/16”
5/8”
21/32”
TMS S-249-2
2
2-3/16”
23/32”
7/8”
TMS S-249-2-P
2
2-3/16”
23/32”
7/8”
TMS S-249-3
3
3-3/4”
3/4”
31/32”
TMS S-249-3-P
3
3-3/4”
3/4”
31/32”
** Limited Quantities
Transat Stainless
Fast Eye Swivel Boat Snaps
▪▪Stainless steel
▪▪Bulk or display packaged (P)
Part #
Size
Length
Eye
Gate
TMS S-251-1
1
3-11/32”
21/32”
5/8”
TMS S-251-1-P
1
3-11/32”
21/32”
5/8”
TMS S-251-2
2
2-23/32”
3/4”
13/16”
TMS S-251-2-P
2
2-23/32”
3/4”
13/16”
TMS S-251-3
3
4-9/16”
3/4”
29/32”
TMS S-251-3-P
3
29/32”
4-9/16”
3/4”
Length
Pin Dia.
Jaw
Open
Break
Load
TMS S-8281-06
2-1/2”
1/4”
1/2”
2,200 lbs
TMS S-8281-06-P
2-1/2”
1/4”
1/2”
2,200 lbs
TMS S-8281-08
3-1/2”
5/16”
5/8”
4,000 lbs
TMS S-8281-08-P
3-1/2”
5/16”
5/8”
4,000 lbs
TMS S-8281-10
4-1/2”
3/8”
3/4”
4,600 lbs
TMS S-8281-10-P
4-1/2”
3/8”
3/4”
4,600 lbs
TMS S-8281-13
5-3/4”
1/2”
7/8”
9,200 lbs
TMS S-8281-13-P
5-3/4”
1/2”
7/8”
9,200 lbs
Part #
Transat Stainless
Swivel Eye & Eye
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
Part #
TMS S-8280-05
TMS S-8280-05-P
Size
Gate
Break Load
2”
3/16”
1,760 lbs
2”
3/16”
1,760 lbs
TMS S-8280-06
2-1/2”
1/4”
3,080 lbs
TMS S-8280-06-P
2-1/2”
1/4”
3,080 lbs
TMS S-8280-08
3-1/2”
5/16”
5,500 lbs
TMS S-8280-08-P
3-1/2”
5/16”
5,500 lbs
TMS S-8280-09
4-1/2”
3/8”
6,300 lbs
TMS S-8280-09-P
4-1/2”
3/8”
6,300 lbs
Transat Stainless
Quick Links
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
Part #
Length
Gauge
Open
Break
TMS S-7350-04
1-9/16”
5/32”
3/16”
2,000 lbs
TMS S-7350-04-P
1-9/16”
5/32”
3/16”
2,000 lbs
TMS S-7350-05
1-15/16”
3/16”
7/32”
2,600 lbs
TMS S-7350-05-P
1-15/16”
3/16”
7/32”
2,600 lbs
TMS S-7350-06
2-1/4”
1/4”
5/16”
3,500 lbs
TMS S-7350-06-P
2-1/4”
1/4”
5/16”
3,500 lbs
TMS S-7350-08
2-7/8”
5/16”
3/8”
6,100 lbs
TMS S-7350-08-P
2-7/8”
5/16”
3/8”
6,100 lbs
TMS S-7350-10
3-5/8”
3/8”
1/2”
9,200 lbs
TMS S-7350-10-P
3-5/8”
3/8”
1/2”
9,200 lbs
Boating Parts & Accessories
▪▪Stainless steel
▪▪Bulk or display packaged (P)
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
180
Transat Stainless
Transat Stainless
Wire Rope Clips
Transat Stainless Welded Rings
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
Boating Parts & Accessories
Part #
Loop Gauge
Wire Dia.
TMS S-8800-03
1/8”
3/32”
TMS S-8800-03-P
1/8”
3/32”
TMS S-8800-04
5/32”
1/8”
TMS S-8800-04-P
5/32”
1/8”
TMS S-8800-05
3/16”
3/16”
TMS S-8800-05-P
3/16”
3/16”
TMS S-8800-06
1/4”
7/32”
TMS S-8800-06-P
1/4”
7/32”
TMS S-8800-08
5/16”
9/32”
TMS S-8800-08-P
5/16”
9/32”
TMS S-8800-10
3/8”
3/8”
TMS S-8800-10-P
3/8”
3/8”
TMS S-8800-12
1/2”
7/16”
TMS S-8800-12-P
1/2”
7/16”
TMS S-470-0325
1/8” x 1”
TMS S-470-0325-P 1/8” x 1”
TMS S-470-0425
5/32” x 1”
TMS S-470-0425-P 5/32” x 1”
TMS S-470-0525
3/16” x 1”
TMS S-470-0525-P 3/16” x 1”
TMS S-470-0530
3/16” x 1-1/4”
TMS S-470-0530-P 3/16” x 1-1/4”
TMS S-470-0540
3/16” x 1-1/2”
TMS S-470-0540-P 3/16” x 1-1/2”
TMS S-470-0550
3/16” x 2”
TMS S-470-0550-P 3/16” x 2”
TMS S-470-0630
1/4” x 1-1/4”
TMS S-470-0630-P 1/4” x 1-1/4”
TMS S-470-0640
1/4” x 1-1/2”
TMS S-470-0640-P 1/4” x 1-1/2”
TMS S-470-0650
1/4” x 2”
TMS S-470-0650-P 1/4” x 2”
Transat Stainless
‘S’ Hooks
TMS S-470-0840
5/16” x 1-1/2”
TMS S-470-0840-P 5/16” x 1-1/2”
▪▪Forged 316 stainless steel
▪▪Bulk or display packaged (P)
Part #
TMS S-470-0320
1/8” x 3/4”
TMS S-470-0320-P 1/8” x 3/4”
Gauge
Opening
TMS S-8070-05
3/16”
11/32”
TMS S-8070-05-P
3/16”
11/32”
TMS S-8070-06
1/4”
13/32
TMS S-8070-06-P
1/4”
13/32
TMS S-8070-08
5/16”
15/32”
TMS S-8070-08-P
5/16”
15/32”
TMS S-470-0845
5/16” x 1-3/4”
TMS S-470-0845-P 5/16” x 1-3/4”
TMS S-470-0850
5/16” x 2”
TMS S-470-0850-P 5/16” x 2”
TMS S-470-0865
5/16” x 2-1/2”
TMS S-470-0865-P 5/16” x 2-1/2”
TMS S-470-0950
3/8” x 2”
TMS S-470-0950-P 3/8” x 2”
TMS S-470-0980
3/8” x 3-1/2”
TMS S-470-0980-P 3/8” x 3-1/2”
Transat Stainless
1/4” x 2”
1/4” x2
W
TMS S-6325-2650
TMS S-6325-2650-P
E
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
N
Transat Stainless Welded Triangle Rings
181
Transat Stainless Thimbles
▪▪304 stainless steel
TMS S-2344 3MM
TMS S-2344 4MM
Transat Stainless Open Base Stainless Cleats
Transat Stainless Welded ‘D’ Rings
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
TMS S-469-0315
1/8” x 5/8”
TMS S-469-0315-P 1/8” x 5/8
TMS S-469-0420
5/32” x 3/4”
TMS S-469-0420-P 5/32” x 3/4”
TMS S-469-0525
3/16” x 1”
TMS S-469-0525-P 3/16” x 1”
TMS S-469-0532
3/16” x 1-1/4”
TMS S-469-0532-P 3/16” x 1-1/4”
TMS S-469-0538
3/16” x 1-1/2”
TMS S-469-0538-P 3/16” x 1-1/2”
TMS S-469-0632
1/4” x 1-1/4”
TMS S-469-0632-P 1/4” x 1-1/4”
TMS S-469-0850
5/16” x 2”
TMS S-469-0850-P 5/16” x 2”
TMS S-469-0862
5/16” x 2-7/16”
TMS S-469-0862-P 5/16” x 2-7/16”
TMS S-469-0875
5/16” x 3”
TMS S-469-0875-P 5/16” x 3”
TMS Q300024”
TMS Q30002-P4”
TMS Q300035”
TMS Q30003-P5”
TMS Q300046”
TMS Q30004-P6”
TMS Q300058”
TMS Q30005-P8”
TMS Q3000610”
TMS Q30006-P10”
TMS Q3000712”
TMS Q30007-P12”
Transat Stainless Low Silhouette Cleats
▪▪316 stainless steel
TMS Q310046”
TMS Q310058”
TMS Q3100610”
Transat Stainless Straight Chocks
▪▪316 stainless steel
TMS Q300105”
TMS Q300116”
Transat Stainless Skene Bow Chocks
▪▪316 stainless steel
TMS Q30014A
TMS Q30014B
TMS Q30015A
TMS Q30015B
4-1/2” - RH
4-1/2” - LH
6” - RH
6” - LH
Boating Parts & Accessories
TMS S-469-0425
5/32” x 1”
TMS S-469-0425-P 5/32” x 1”
▪▪316 stainless steel
▪▪Bulk or display packaged (P)
182
Transat Stainless
Transat Stainless Pad Eye Oblong Base
Transat Stainless Eye Strap
▪▪304 stainless steel
▪▪316 stainless steel
TMS Q321019.5mm
TMS Q692113”
TMS Q692123-1/2”
TMS Q692134”
Transat Stainless Stamped Eye Strap
Transat Stainless Pad Eye Diamond Base
▪▪304 stainless steel
Boating Parts & Accessories
TMS Q692143-1/8”
TMS Q692153-1/2”
TMS Q692164”
▪▪316 stainless steel
TMS Q321055mm
Transat Stainless Wire Stamped Eye Straps
▪▪316 stainless steel
Transat Stainless 4-Hole Pad Eyes
TMS Q322055mm
TMS Q322066mm
TMS Q322088mm
▪▪304 stainless steel
▪▪Bulk or display packaged (P)
Transat Stainless HD Deck Hinge
Loop Gauge
Base
TMS S-8020-05
Part #
3/16”
1-11/32” x 1-3/16”
TMS S-8020-05-P
3/16”
1-11/32” x 1-3/16”
TMS S-8020-06
1/4”
1-19/32” x 1-11/32”
TMS S-8020-06-P
1/4”
1-19/32” x 1-11/32”
TMS S-8020-08
5/16”
1-31/32” x 1-17/32”
TMS S-8020-08-P
5/16”
1-31/32” x 1-17/32”
Transat Stainless 2-Hole Pad Eyes
TMS Q30093
Loop Gauge
Base
TMS S-8030-05
3/16”
1-25/32” x 14/32”
TMS S-8030-05-P
3/16”
1-25/32” x 14/32”
TMS S-8030-06
1/4”
2-11/32” x 25/32”
TMS S-8030-06-P
1/4”
2-11/32” x 25/32”
TMS S-8030-08
5/16”
3-1/8” x 1”
TMS S-8030-08-P
5/16”
3-1/8” x 1”
Side mounted
Transat Stainless Deck Hinge
▪▪316 stainless steel
▪▪Dimensions: 7/8” x 2”
▪▪Fastener: #10
▪▪Pin: 1/4”
TMS Q30098
▪▪304 stainless steel
▪▪Bulk or display packaged (P)
Part #
▪▪316 stainless steel
▪▪Dimensions: 1” x 2-3/4”
▪▪Fastener: #10
▪▪Pin: 5/16”
Side mounted
Transat Stainless Deck Hinges
▪▪316 stainless steel
▪▪Base Diameter: 3/4” x 2-1/4”
▪▪Fastener: #10
▪▪Pin: 1/4”
TMS Q30086Straight
TMS Q30088Angled
Transat Stainless Concave Deck Hinge
▪▪316 stainless steel
▪▪Base Dimensions: 3/4” x 2-1/4”
▪▪Fastener: #10
▪▪Pin: 1/4”
TMS Q30090
Transat Stainless
Transat Stainless Rail Fitting
Rectangle Base
Transat Stainless 90° Elbows
▪▪316 stainless steel
TMS Q300637/8”
TMS Q300641”
TMS Q30035
TMS Q30036
TMS Q30053
TMS Q30054
90° 7/8”
90° 1”
60° 7/8”
60° 1”
183
▪▪316 stainless steel
Transat Stainless Top Cap Fittings
▪▪316 stainless steel
Transat Stainless Rail Fitting
Round Base
TMS Q30017
TMS Q30018
7/8” w/eye
1” w/eye
Left hand
Left hand, carded
Right hand
Right hand, carded
Transat Stainless Jaw Slide
▪▪316 stainless steel
TMS Q300817/8”
TMS Q300821”
Transat Stainless 3-Way Corner Fitting
▪▪316 stainless steel
Transat Stainless Centre 60° Stanchion
TMS Q300207/8”
TMS Q300211”
▪▪316 stainless steel
TMS Q300257/8”
TMS Q300261”
Transat Stainless Stanchion Cap
Transat Stainless After 60° Stanchion
▪▪316 stainless steel
▪▪316 stainless steel
TMS Q300227/8”
TMS Q300231”
TMS Q300277/8”
TMS Q300281”
Transat Stainless 60° Rail Tees
Transat Stainless 2-Part Jaw Slide
▪▪316 stainless steel
TMS Q30057
TMS Q30058
▪▪316 stainless steel
60° 7/8”
60° 1”
Transat Stainless 90° Rail Tees
▪▪316 stainless steel
TMS Q300597/8”
TMS Q300601”
TMS Q350817/8”
TMS Q350821”
Boating Parts & Accessories
▪▪316 stainless steel
W
Transat Stainless Stanchion Eye
▪▪316 stainless steel
TMS Q16002L
TMS Q16002L-P
TMS Q16002R
TMS Q16002R-P
E
90° 7/8”
90° 1”
60° 7/8”
60° 1”
N
Transat Stainless Adjustable Top Caps
▪▪316 stainless steel
TMS Q30038
TMS Q30039
TMS Q30047
TMS Q30048
TMS Q300747/8”
TMS Q300751”
TMS Q300761-1/4”
184
®
Stainless Steel Performance at Aluminum Prices
New unique blade geometry results in the highest performance
aluminum propellers on the block. Turning Point offers boaters
4 blade performance without the common top end loss of
competitors designs. Unmatched in cornering, acceleration,
boat handling, and top speed, these Hustler props outperformed
most stainless steel props in recent tests.
Tuned Vents for Fast Hole Shot
Turning Point is the only propeller manufacturer to use this race boat
proven technology in aluminum propellers to increase low speed
acceleration and hole shot. Common on stainless props, we use it to
get you on plane faster than any other prop in the market. (selected
models only 13” & 14” diameter 17+ Pitch).
Performance Tuned Rake Angles
Higher rake angles tighten the vortex produced by the propellers, adding to
boat lift and overall performance.
Improve Handling and Boat Lift
Through aggressive rake and cupping.
High Flow-Through Barrel Exhaust System
Maximizing exhaust flow increases horsepower and top end speed.
Tuned Progressive Pitch Angles
Accelerating and channeling water to minimize slip increases performance
and fuel economy.
Long Lasting Powder Coated Finish
The best looking aluminum props made! Turning
Point’s five step process produces a uniform and
glossy finish that is durable and resists corrosion
better than paint.
Compatible with Competitors’ Hub Kit Systems
Works with Mercury® Flo-Torq II®,
Michigan Wheel® XHS®, and Solas®
Rubex™ hub kit systems. NOTE: Not
applicable with Turning Point’s 10, 20 and
200 Hub Kit series.
Lifetime Warranty Hub Kits
Turning Point offers its unique hub and
housing system from 8hp to 300+hp,
a range of engines unmatched in the
industry. Propeller and Hub Kit systems
covered by USA and worldwide patents
Utilizing high tech shock absorbing
polymers and a solid brass spindle,
the Turning Point hubs will not corrode
or break like competing hubs, and are
covered by an industry leading Lifetime
Warranty. Each hub’s one piece design
ensures simple housing replacement,
making a prop change quick and easy.
(All trademarks are the property of their respective owners).
Aluminum Propeller Groups
8-20hp
9”, 10”
9.9-35hp
11”, 13”
25-75hp
8”, 10.5”, 11”, 12”, 13”, 14”, 15”,17”
40-150hp
11”, 13”, 15”, 17”, 19”, 21”, 23”
15”, 17”, 19”
90-300+hp
15”, 17”, 19”, 21”, 23”
15”, 17”, 19”, 21”
HUB kit SYSTEMS
185
MASTERGUARD ®
HUB KIT SYSTEMS
Featuring Turning Point Propellers
Exclusive lifetime warranty hubs
“The Last hub you will have to buy
engineered to not let you down”
Turning Point is the only company to offer inventory reducing hub kit and
prop housing systems for 8-300hp+ engines with a Lifetime Warranty Hub.
Boaters save up to 38% when buying a replacement propeller housing.
500 Series Hub System
Works with diamond and square
labeled propeller groups
4-3/4” and 4-1/4” gearcases
40 - 300+hp
Turning Point’s Hub Kit Systems are engineered to withstand typical
wear and tear over time without risk of spinning or failure under normal
operational use. Turning Point’s unique patented one piece hub with glass
filled nylon over brass splines eliminates failures commonly seen in multipart “sleeve and spline” designs, and pressed-in rubber hub systems.
Turning Point’s 500 series hub Kits (for 4.25 & 4.75 inch gearcases)
interchanges with other manufacturers’ propellers. Upgrades and
replaces Mercury® Flo-Torq II®, Michigan Wheel XHS®, and Solas®
Rubex™ hub kit systems.
10 Series Hub System
Works with circle labeled
propeller groups
3-1/2” gearcase
25 - 75hp
Eliminate Hub System Vibration and Chatter
Innovative one piece design reduces the number of parts and eliminates
failures commonly seen in multi-part hub systems.
Eliminate Hub Cracking and Failure
The glass reinforced high-tech polymer construction increases flexibility,
eliminating potential material stress fractures.
Corrosion Resistant Materials
Premium corrosion resistant brass splines.
20 Series Hub System
Works with triangle labeled
propeller groups
3” gearcase
9.9 - 35hp
Reduce Gear Shock and Engine/Drive Damage
Shock absorbing high-tech polymer cushion.
Reduces Inventory Cost
Turning Point is the only manufacturer to offer the hub and housing
system in full line of propeller applications.
Easy to Install – Consumer Friendly
Clear and easy step-by-step directions coupled with minimal parts makes
installation easy.
Increases Performance and Horsepower
High-flow through barrel exhaust system maximizes exhaust flow
increasing horsepower and top end speed.
200 Series Hub System
Works with star labeled
propeller groups
2-1/2” gearcase
8 - 20hp
Covered by US Patent #6,471,481, #6,685,432, #7,717,678
and
worldwide patents with additional patents pending.
186
PICK
P
O
T 2013
for
how to fiNd your
boat propeller
“15 years and running • Turning Point Propellers is still designing the world’s best
performing and highest quality 3 & 4 blade Aluminum and Stainless Steel boat propellers“
1. find your Engine
8 - 20 hp Aluminum Propellers
ENGINE BRAND
EVINRUDE® / JOHNSON®: (13 spline) 2 stroke (‘74-’95): 9.9, 15
4 stroke: 8hp (‘96 and newer) / 9.9 & 15hp (‘95-’01)
EVINRUDE® / JOHNSON®: (10 spline) 4 stroke: 9.9 & 15 (‘02+)
HONDA®: (8 spline)
8hp (‘01 & newer) / 9.9, 15, 20hp. Note: Does not fit 8 Classic, pin drive.
MERCURY® & MARINER®: (8 spline, lock nut)
2 stroke: 6hp, 8hp, 9.9hp, 15hp / Sea Pro/Marathon 10, 15hp
4 stroke: 8, 9.9hp (‘95-’04), 15 hp (‘89-’06)
MERCURY® & MARINER®: (14 spline shaft by Nissan, cotter pin)
4 stroke Bigfoot (‘05+): 8hp, 9.9hp / 4 stroke (‘07+): 15hp, 20hp
NISSAN® & TOHATSU®: (14 spline) 2 stroke: 9.9hp (‘84-’05),
12hp (‘85-’88) / 15 & 18hp (‘85-’05) / 4 stroke: 9.9hp, 15hp, 18hp, 20hp
SUZUKI®: (10 spline TYPE M) DT 2 stroke: 9.9 (‘83-’87), 15hp, 15C/
DF 4 stroke: 9.9hp, 15hp Note: Does not fit DT 8C & 9.9C (‘88-’97)
YAMAHA®: (8 spline) 2 stroke: 9.9, 15 / 4 stroke: 9.9, 15, 15C, 20hp
NISSAN® & TOHATSU®: (12 spline)
2 & 4 stroke: 8hp, 9.8hp
MERCURY® & MARINER®: (12 spline, cotter pin)
4 stroke ('05 & newer): 8, 9.9hp
2. buy this hub
HUB
PART #
TUR 202
1110 0201
TUR 206
1110 0601
TUR 205
1110 0501
TUR 201
1110 0101
TUR 207
1110 0701
TUR 207
1110 0701
TUR 206
1110 0601
TUR 205
1110 0501
TUR 208
1110 0801
TUR 208
1110 0801
TUR 22
1120 0200
TUR 21
1120 0100
TUR 21
1120 0100
TUR 28
1120 0800
TUR 28
1120 0800
TUR 28
1120 0800
TUR 25
1120 0500
TUR 26
1120 0600
TUR 26
1120 0600
TUR 11
TUR 11
1130 0100
1130 0100
TUR 12
1130 0200
TUR 11
1130 0100
TUR 13
1130 0300
TUR 11
1130 0100
TUR 12
1130 0200
9.9 - 35 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: (14 spline)
2 stroke: 20hp, 25hp ('84 and newer), 25hp commercial ('93-'05), 30hp
('84 and newer), 35hp ('76-'05) / E-Tec: 25, 30hp
FORCE®: (10 spline) 25hp ('95-'98)
MERCURY® & MARINER®: (10 spline)
2 stroke: 18hp ('80-'85), 20hp ('86 and newer), 25hp ('85 and newer)
4 stroke Bigfoot: 9.9hp, 15hp
HONDA®: BF25, BF30
MERCURY® & MARINER®:
4 stroke ('06 & newer, cotter pin shaft): 25hp , 30hp
NISSAN® & TOHATSU®: 2 and 4 stroke: 25hp, 30hp
YAMAHA®:
2 stroke: 20hp, 25hp, 30hp / 4 stroke: 25hp
EVINRUDE® / JOHNSON®:
4 stroke: 25hp, 30hp
SUZUKI®:
DT 2 stroke ('87 and newer): 20, 25, 25C, 30, 30C
DF 4 stroke: 25hp, 30hp
25 - 75 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: 4 stroke: 40 / 50hp
FORCE®: 40hp ('95-'98), 50hp ('95-'98), 70hp ('91-'95), 75hp ('96-'98)
HONDA®:
BF 4 stroke: 35, 40, 45, 50, 60hp, (not P60)
MERCURY® & MARINER®:
2 stroke: 30hp ('94+) / 35, 45, 55 / 40, 50, 60 ('77+) / 70hp (up to '83)
4 stroke: 25hp Bigfoot / 30hp ('94-'05) / 40hp to 60hp
NISSAN® & TOHATSU®:
40C, 40D, 50D, 50C, 60A, 70A2, 60B, 70B
SUZUKI®: DT 2 stroke ('89+): 35C, 40, 50, 50M, 55, 60, 65hp
DF 4 stroke: 40hp, 50hp
YAMAHA®:
2 stroke: 40hp to 55hp / 4 stroke: FT25hp High Thrust, 30hp to 60hp
3. pick your housing pitch
DIA X PITCH
9X9
9 X 10
MODEL #
R4-0909
R4-0910
PART #
TUR 2110 0910
TUR 2110 1010
3 Blade
4 Blade
Left Rotation
Right Rotation (standard)
DIA X PITCH
MODEL #
PART #
9X9
9 X 10
R5-0909
R5-0910
TUR 2111 0910
TUR 2111 1010
DIA X PITCH
MODEL #
PART #
10-1/2 X 11
10-1/8 X 13
R1-1011
R1-1013
TUR 2120 1110
TUR 2120 1310
DIA X PITCH
MODEL #
PART #
10-3/8 X 11
10-3/8 X 13
R2-1011
R2-1013
TUR 2121 1110
TUR 2121 1310
DIA X PITCH
MODEL #
PART #
10-1/2 X 11
10-1/8 X 13
R3-1011
R3-1013
TUR 2122 1110
TUR 2122 1310
DIA X PITCH
MODEL #
PART #
12-1/2 X 8
12 X 10-1/2
10-7/8 X 11
10-3/4 X 12
10-1/2 X 13
10-3/8 X 14
10-1/8 X 15
H1-1208
H1-1210
H1-1011
H1-1012
H1-1013
H1-1014
H1-1015
† TUR 2130 0810
TUR 2130 1010
TUR 2130 1110
TUR 2130 1210
TUR 2130 1310
TUR 2130 1410
TUR 2130 1510
† Does not fit Honda
Mercury/Mariner (1977 and older) not available.
Yamaha: if propeller strikes trim tab,
replace with Yamaha part # 6E5-45371-10.
MerCruiser: If propeller strikes trim tab,
replace with Mercury part #822777A1.
Exclusive lifetime warranty hubs
“the Last hub you will have to buy
engineered to not let you down”
187
No faster prop
oN the water
Aluminum designs that out perform Stainless Steel props through squeeze casting and unique blade geometry
DIE - CAST
SQUEEZE CAST
Turning Point Exclusive Process Applied to all Aluminum Designs
Tight Grain · Strong and Stiff · Reduces Flex for Maximum Thrust
25 - 75 hp Aluminum Propellers
ENGINE BRAND
EVINRUDE® / JOHNSON®:
2 cyl.: 40hp, 48hp / 50hp ('75-'5) / 55hp ('76-'79) / 60hp, 65hp ('80-'85)
3 cyl. (with small gearcase): 75hp ('75-'85)
Sprint and Formula E ('86-'92)
Competitors’ Process · Pockets, Voids, Air Bubbles · Weak and
Flexible · Inefficient Transfer of Power · Poor Repairability
HUB
TUR 12
PART #
1130 0200
40-150 hp Aluminum Propellers
EVINRUDE® / JOHNSON®: (13 spline shaft)
2 cyl: 50hp ('71-'74) / 45 to 55hp commercial
3 cyl: 55, 60, 65, 70hp, 75hp with large gearcase, 65hp commercial
4 cyl: 75, 85, 88, 90, 100, 110, 115, 120 ('86-'94), 125, 135 ('73-'76), 140
('77-'84, '86-'94) / H.O.: 115hp
E-TEC: 40, 50, 60, 75hp / 20" shaft: 90, 115hp, 130hp ('09-'10)
EVINRUDE® / JOHNSON®: (13 spline shaft)
4 stroke: 60hp, 70hp
FORCE® (15 spline shaft): 75hp ('99) / 90hp to 150hp ('95 and newer)
HONDA® (15 spline shaft) ('95-'98): 75, 90hp
HONDA® (15 spline shaft):
P60 / 75, 90 ('99+) / 115, 130hp. (not 115D)
MERCURY® & MARINER® (15 spline shaft): (2 and 4 stroke)
40 to 60 Bigfoot / 70 ('87-'89) / 75, 80 ('78-'89), 90, 100, 115, 125, 140hp
150 XR4/6 (thru 1993, includes equivalent Mariner Magnum I, II, III.)
NISSAN® & TOHATSU® (15 spline shaft): 60C, 70C / 90 to 140hp
OMC® (13 spline shaft):
Cobra 400: 2.3 to 3.0L ('78-'89) / Sea Drive: 1.6 to 1.8L
SUZUKI®: (13 spline shaft)
DT 2 Stroke ('89+): 75 to 140hp / DF 4 Stroke ('98-'09): 60, 70hp
YAMAHA® (15 spline shaft):
High Thrust: T50, FT60 / 2 stroke: 60 to 100hp / 4stroke: 70 to 100hp
YAMAHA® (15 spline shaft): 2 stroke: 115 to 130hp / 4stroke: 115hp
V6 135 to 300hp / Verado 135 to 275hp. Note: Does not fit Pro XS.
MERCRUISER®*:
Alpha One and Bravo One ('83 and newer)
OMC®:
Cobra 800: 3.0 to 7.5L / King Cobra: 454, 502 / Sea Drive: 2.0 to 4.0L
SUZUKI®: DT 2 stroke: 150hp to 225hp
VOLVO® PENTA SX & OMC SX COBRA: (19 spline)
('94 and newer): 3.0 to 8.2L. Not available for Volvo DuoProp or Aquamatic drives.
YAMAHA®:
2 and 4 stroke: 150 to 250hp / stern drives 3.0 to 7.4L
MODEL #
PART #
12-1/2 X 8
12 X 10-1/2
12-1/2 X 13
12-1/4 X 15
11-3/4 X 17
H2-1208
H2-1210
H2-1213
H2-1215
H2-1117
TUR 2131 0810*
TUR 2131 1010*
TUR 2131 1310
TUR 2131 1510
TUR 2131 1710
DIA X PITCH
MODEL #
PART #
14 X 11
14 X 13
13-3/4 X 15
13-1/4 X 17
13-1/4 X 19
13-1/4 X 21
13-1/4 X 23
LE1/LE2-1411
LE1/LE2-1413
LE1/LE2-1315
LE1/LE2-1317
LE1/LE2-1319
LE1/LE2-1321
LE1/LE2-1323
TUR 2143 1111
TUR 2143 1311
TUR 2143 1511
TUR 2143 1711
TUR 2143 1911
TUR 2143 2111
TUR 2143 2311
TUR 503
1150 0300
TUR 506
1150 0600
TUR 501
TUR 501
1150 0100
1150 0100
TUR 507
1150 0700
DIA X PITCH
MODEL #
PART #
TUR 501
1150 0100
13-1/4 X 17
13 X 19
LE1/LE2-1317-4
LE1/LE2-1319-4
TUR 2143 1730
TUR 2143 1930
TUR 505
1150 0500
TUR 503
1150 0300
TUR 506
1150 0600
TUR 500
1150 0000
TUR 505
1150 0500
90-300+ hp Aluminum Propellers
EVINRUDE® / JOHNSON®:
V4 with V6 large gearcase: 100hp commercial, 120hp ('85),
130hp ('95-'96), 140hp ('85),
Pleasure ('95 and newer): 115hp, 130hp / H.O.: 150, 200, 225, 250hp
E-TEC: (25" shaft) 90hp, 115hp, 130hp ('09-'10) / 135hp to 300hp
V6: 135hp to 250hp / V8: 250hp to 300hp
HONDA®: BF115D, BF135, BF150, BF200, BF225
HONDA®: BF200(13&Newer), BF225 (13&Newer), BF250 (12&Newer)
MERCURY® & MARINER®*:
DIA X PITCH
TUR 502
1150 0200
TUR 507
TUR 508
1150 0700
1150 0800
TUR 501
1150 0100
TUR 501
1150 0100
TUR 502
1150 0200
TUR 507
1150 0700
TUR 504
1150 0400
TUR 505
1150 0500
2143 and 2150 housings compatible with
Mercury® Flo-Torq II®, Michigan Wheel®
XHS®, Solas® Rubex™ RBX™ Hub systems
DIA X PITCH
MODEL #
PART #
15-1/4 X 15
14-1/4 X 17
14-1/4 X 19
14-1/4 X 21
14-1/4 X 23
LE-1515
LE-1417
LE-1419
LE-1421
LE-1423
TUR 2150 1511
TUR 2150 1711
TUR 2150 1911
TUR 2150 2111
TUR 2150 2311
DIA X PITCH
MODEL #
PART #
15 X 15
14-1/2 X 17
14 X 19
LE-1515-4
LE-1417-4
LE-1419-4
TUR 2150 1530
TUR 2150 1730
TUR 2150 1930
DIA X PITCH
MODEL #
PART #
15 X 15
14-1/2 X 17
14 X 19
14 X 21
LE-1515-4L
LE-1417-4L
LE-1419-4L
LE-1421-4L
TUR 2150 1540
TUR 2150 1740
TUR 2150 1940
TUR 2150 2140
TURNING-POINT ®
188
PROPELLERS
Propeller & Hub List
Part #
Item #
HUBS
TUR 201
TUR 202
TUR 205
TUR 206
TUR 207
TUR 208
1110 0100
1110 0200
1110 0500
1110 0600
1110 0700
1110 0800
Mercury Hub
Evinrude/Johnson Hub
Yamaha Hub
Suzuki Hub
Nissan Tohatsu Hub
Nissan Tohatsu Hub
TUR 21
TUR 22
TUR 25
TUR 26
TUR 28
1120 0100
1120 0200
1120 0500
1120 0600
1120 0800
Mercury Hub
Evinrude/Johnson Hub
Yamaha Hub
Honda Hub
Suzuki Hub
TUR 11
TUR 12
TUR 13
1130 0100
1130 0200
1130 0300
Mercury, Suzuki Hub
Yamaha, Honda Hub
Nissan, Tohatsu Hub
TUR 500
TUR 501
TUR 502
TUR 503
TUR 504
TUR 505
TUR 506
TUR 507
TUR 508
TUR 509
1150 0000
1150 0100
1150 0200
1150 0300
1150 0400
1150 0500
1150 0600
1150 0700
1150 0800
1150 0900
Yamaha Hub
Honda, Mercury Hub
Evinrude, Johnson Hub
Evinrude, Johnson Hub
Volvo Penta Hub
Nissan, Tohatsu, Yamaha Hub
Suzuki Hub
Honda, Suzuki Hub
Honda
Suzuki 4 stroke DF90/115 Hub
200 SERIES HUB KITS
20 SERIES HUB KITS
10 SERIES HUB KITS
500 SERIES HUB KITS
Part #
TUR 2110 0910
TUR 2110 1010
TUR 2111 0910
TUR 2111 1010
Item #
R4-0909
R4-0910
R5-0909
R5-0910
HUSTLER® - Use 200 Series Hub
3BL 9X9 RH Prop Housing
3BL 9X10 RH Prop Housing
3BL 9X9 RH Prop Housing
3BL 9X10 RH Prop Housing
Part #
TUR 2120 1110
TUR 2120 1310
TUR 2121 1110
TUR 2121 1310
TUR 2122 1110
TUR 2122 1310
Item #
R1-1011
R1-1013
R2-1011
R2-1013
R3-1011
R3-1013
HUSTLER® - Use 20 Series Hub
3BL 10-1/2 X 11 RH Prop Housing
3BL 10-1/8 X 13 RH Prop Housing
3BL 10-3/8 X 11 RH Prop Housing
3BL 10-3/8 X 13 RH Prop Housing
3BL 10-1/2 X 11 RH Prop Housing
3BL 10-1/8 X 13 RH Prop Housing
Part #
TUR 2130 1110
TUR 2130 1210
TUR 2130 1310
TUR 2130 1410
TUR 2130 1510
TUR 2130 0810
TUR 2130 1010
TUR 2131 1710
TUR 2131 0810*
TUR 2131 1010*
TUR 2131 1310
TUR 2131 1510
Item #
H1-1011
H1-1012
H1-1013
H1-1014
H1-1015
H1-1208
H1-1210
H2-1117
H2-1208
H2-1210
H2-1213
H2-1215
HUSTLER® - Use 10 Series Hub
3BL 10-7/8 X 11 RH Prop Housing
3BL 10-3/4 X 12 RH Prop Housing
3BL 10-1/2 X 13 RH Prop Housing
3BL 10-3/8 X 14 RH Prop Housing
3BL 10-1/8 X 15 RH Prop Housing
3BL 12-1/2 X 8 RH Prop Housing
3BL 12 X 10-1/2 RH Prop Housing
3BL 11-3/4 X 17 RH Prop Housing
3BL 12-1/2 X 8 RH Prop Housing
3BL 12 X 10-1/2 RH Prop Housing
3BL 12-1/2 X 13 RH Prop Housing
3BL 12-1/4 X 15 RH Prop Housing
Part #
TUR 2143 1111
TUR 2143 1311
TUR 2143 1511
TUR 2143 1711
TUR 2143 1911
TUR 2143 2111
TUR 2143 2311
TUR 2143 1111
TUR 2143 1311
TUR 2143 1511
TUR 2143 1530
TUR 2143 1711
TUR 2143 1911
TUR 2143 2111
TUR 2143 2311
TUR 2150 1511
TUR 2150 1711
TUR 2150 1911
TUR 2150 2111
TUR 2150 2311
TUR 2150 1730
TUR 2150 1930
Item #
LE1-1411
LE1-1413
LE1-1315
LE1-1317
LE1-1319
LE1-1321
LE2-1411
LE2-1413
LE2-1315
LE1-1315-4
LE2-1317
LE2-1319
LE2-1321
LE-1515
LE-1417
LE-1419
LE-1421
LE-1423
-
HUSTLER® - Use 500 Series Hub
3BL 14 X 11 RH Prop Housing
3BL 14X13 RH Prop Housing
3BL 13-3/4 X 15 RH Prop Housing
3BL 13-1/4 X 17 RH Prop Housing
3BL 13-1/4 X 19 RH Prop Housing
3BL 13-1/4 X 21 RH Prop Housing
3BL 13-1/4 X 23 RH Prop Housing
3BL 14X11 RH Prop Housing
3BL 14X13 RH Prop Housing
3BL 13-3/4 X 15 RH Prop Housing
3BL 13-1/2 X 15 RH Prop Housing
3BL 13-1/4 X 17 RH Prop Housing
3BL 13-1/4 X 19 RH Prop Housing
3BL 13-1/4 X 21 RH Prop Housing
3BL 13-1/4 X 23 RH Prop Housing
3BL 15-1/4 X 15 RH Prop Housing
3BL 14-1/4 X 17 RH Prop Housing
3BL 14-1/4 X 19 RH Prop Housing
3BL 14-1/4 X 21 RH Prop Housing
3BL 14-1/4 X 23 RH Prop Housing
4BL 14X17 RH Prop Housing
4BL 14X19 RH Prop Housing
* Request Items
Lifetime Warranty Hubs
SQUEEZE
CAST
DIE - CAST
Stainless Designs in Aluminum - Squeeze Cast
Turning Point Exclusive Process applied to all aluminum props
- Squeeze Cast process generates the highest mechanical
properties attainable in a cast product, resulting in tighter
grain structures. Competitors use old Die Cast processes that
results in high blade flex and poor performance.
Stainless Steel Performance at Aluminum Prices!
Aluminum
Squeeze Cast for Added Strength
Best “in-class” reversibility
A Turning Point Exclusive process is used to manufacture all
aluminum propellers. Squeeze Casting generates the highest
mechanical properties attainable in a cast aluminum prop resulting
from a tighter grain structure. Stiffer blades means less flex and a
faster prop. Competitors still use old Die-Casting processes that
produce blades that flex, resulting in overall poor performance.
Recent tests reveal that new Hustler
Aluminum Propellers have up to 46%
more reverse thrust over competitive
propeller designs.
SQUEEZE CAST
Turning Point Exclusive Process Applied to all Aluminum Designs Tight Grain • Strong and Stiff • Reduces Flex for Maximum Thrust
DIE - CAST
Competitors’ Process • Pockets, Voids, Air Bubbles • Weak and Flexible • Inefficient Transfer of Power • Poor Repairability
New dual geometry 15x15 Left & Right
New 4 Blades for 40-140HP Outboards
DIA X PITCH (rotation)
Part #
Model #
UPC
DIA X PITCH (rotation)
Part #
Model #
UPC
15 X 15 (RH)
15 X 15 (LH)
21501530
21501540
LE-1515-4
LE-1515-4L
652480-102530
652480-102547
13.5 X 15 (RH)
13.25 X 17 (RH)
13 X 19 (RH)
21431530
21431730
21431930
LE1/LE2-1315-4
LE1/LE2-1317-4
LE1/LE2-1319-4
652480-200670
652480-102516
652480-102523
Designed for engines with 4-3/4” Gearcases
See TP catalog page #16
for exact engine applications
Evinrude® 100 - 300HP
Honda® 115 - 225HP
Johnson® 100 - 300HP
Mercury®: 135 - 275HP
MerCruiser®: 135 - 300HP+
OMC® 3.0 - 7.5L
Suzuki® 115 - 225HP
Volvo® 3.0 - 8.2L
Yamaha® 150 - 250HP
Designed for engines with 4-1/4” Gearcases
See TP catalog page #14
for exact engine applications
Evinrude®/Johnson® 50 - 140HP
Force® 40 - 140HP
Honda® 40 - 140HP
Mercury® 40 - 140HP
Nissan®/Tohatsu® 60 - 115HP
Suzuki® 50 - 140HP
Yamaha® 50 - 100HP
190
Vaavud / WeatherFlow
N
N
W
E
W
E
Boating Parts & Accessories
WeatherFlow Smartphone Windmeter
VAAVUD Smartphone Windmeters
Vaavud Mjolnir
The design is inspired by professional cup anemometers, but with
two cups instead of three, to make the device pocket friendly and
super rugged
▪▪Made of a one-piece durable plastic rotor and low-friction Teflon
bearing, the wind meter communicates directly to the magnetic
field sensor in your smartphone
▪▪Download the free app on the Apple Store or on Google Play
▪▪Vaavud app gives you a clear overview of average, actual, and
maximum wind speed, as well as a real time graph; live map gives
you access to measurements made by other Vaavud users globally
▪▪Measures wind speed from 4 to 48 knots (2-25 m/s)
▪▪Works with iPhone 4, 4S, 5, 5C, 5S and all iPads from 2 onwards
running iOS 6 or 7 and Samsung Galaxy S3, S4 and HTC One
▪▪Includes neoprene storage pouch
VAA VAV-1R Red
VAA VAV-1WWhite
Vaavud Sleipnir
The design of the Vaavud Sleipnir wind
meter is inspired partly by professional cup
anemometers, and partly by a Danish developed
wind turbine with vertical blades. The carefully
designed, asymmetrical rotor accelerates slightly
when the largest surface is hit by the wind.
All the features of the Mjolnir above plus:
▪▪Take accurate wind readings from 1-40 m/s, AND measure the wind direction
VAA VAV-2G Grey
VAA VAV-2RRed
The WeatherFlow Wind Meter is an anemometer
that fits in your pocket. It works with Android &
iOS devices like iPhone, iPod Touch, and iPads.
Download one of the free apps for iOS or Android
and plug in your wind meter – it’s really that easy.
▪▪Just plug it in and measure wind speed (from 2 - 125 mph), direction, average & gusts
▪▪Reads in meters/second, miles/hour, knots,
kilometers/hour, & beaufort scale
▪▪Accurate to the larger of +/- 0.5% of the reading or
0.2 mph at up to 15° off-axis
▪▪Share your readings with friends, instantly
WEA WFANO-01
Weatherhawk
191
WeatherHawk WindMates
Swiss-made impeller components, is water resistant, shockproof
and floats.
Common Features:
WeatherHawk
Skymaster Wind/Weather Meter
SPT SM-28
Accuracy:
Wind:.............................
Temp/Windchill:...........
Relative Humidity:........
Dewpoint/Heat Index:...
Barometer:.....................
Range:
Wind:.............................
Temp:............................
Relative Humidity:........
Dew Point:....................
Heat Index:....................
Barometer:.....................
Altitude:........................
+/-3% when aligned with winds axis
+/- 2° F
+/- 3%
+/- 3° F
+/- 3 hPa
.4-89 MPH
+5° - +122° F
0-99%
31.2° to +155° F
+69° to 155° F
400 to 1100 hPa
-900 to 9000
Response Times:
Current wind:................ 2 second avgerage
Avg wind:...................... 5 second
Max wind:..................... 2-second gust
Power: CR2032 Lithium battery (included)
Measures: 5.9 x 2.1 x .85 in
Weighs: 3.9 oz
Specifications:
Accuracy: Wind +/- 3% when aligned with winds axis
Range: Wind .8-89 MPH
Response Times: Current & maximum wind 1-sec
Optional Units: Knots, MPH, KPH, Ft/Min, M/Sec, Beaufort
Power: CR2032 Lithium battery (included)
Measures: 5.5 x 1.75 x .75 (closed)
Weighs: 3.4 oz
WM-100 WindMate
Includes a wind vane to ensure accurate measurements
on the winds axis. Unlike other wind meters, the
jackknife case allows more precise wind speed readings
because the users hand is distant from the wind impeller,
which then measures undisturbed air flow.
SPT WM-100
WM-200 WindMate
All of the WM-100 features above plus:
▪▪Windmeter with wind vane
▪▪Fluxgate compass for digital wind direction
▪▪Reads when held vertically
▪▪Wind direction in degrees & compass points
▪▪Calculates cross wind, head/tail wind
▪▪Use as a bearing compass
▪▪Temp & wind chill
▪▪Backlight
SPT WM-200
WM-350 WindMate
All of the WM-200 features above plus:
Includes the Accuweather.com patented Comfort
Index, which is the effect of temp, wind speed, relative
humidity & sun intensity on the human body and is
superior to Heat Index.
▪▪Swiss humidity sensor, lifetime calibrated
▪▪Temp/windchill/relative humidity/
wet bulb/dew point/Delta T
SPT WM-350
Boating Parts & Accessories
Unlike other units, the jackknife case gives you the most accurate
measurements--your hand’s heat/moisture won’t influence the
environmental sensors. The Honeywell humidity sensor and the
Swiss-made barometer can be easily re-calibrated, and the unit has
a weather alert if the barometric pressure rises or falls 6 millibars
over 3-hrs.
▪▪Windspeed (Current, Avg, & Max)
▪▪Temp w/Windchill & Heat Index
▪▪Relative Humidity w/Dewpoint
▪▪Barometric Pressure & 16-Hr History Bar Graph
▪▪Storm Audio Alarm
▪▪Altitude
▪▪Pocket-knife design
▪▪Replaceable 400 hr battery
▪▪Replaceable impeller
▪▪Threaded for tripod mounting
▪▪Floats
▪▪Water resistant to 4”
▪▪1 year warranty
▪▪Current, maximum wind speed
▪▪Average wind speed over 5,10,13 seconds
▪▪Choose any measurement unit
▪▪Reads in tenths
▪▪Replaceable 400-hr Lithium battery
▪▪Easy to read LCD
▪▪Threaded for tripod mounting
▪▪Unique pocket-knife design to protect unit when not in use
▪▪Comes with adjustable lanyard
▪▪2 year warranty
192
Waterline Design
N
W
E
1220
1226
Boating Parts & Accessories
Waterline Mosquito Nets
Since the mosquito nets is supposed to be bigger than the
hatch (with a small overlap). The size is universal and fits
most shapes of hatches: square, round, rectangular and small
hatches. Fits all brands of hatches. On smaller hatches the
overlap will be a little bigger. Every mosquito net comes
with a storage bag.
▪▪Ventilates the boat
▪▪Works on flushed hatches
▪▪Keeps out mosquitos, gnats, sand flies, No-See-Ums,
wasp etc.
WAT 1220
WAT 1221
WAT 1222
WAT 1223
WAT 1226
Foredeck hatch, 23” x 23”
Large hatch, 31” x 31”
Small portlight, 12” x 16”
Large portlight, 12” x 27”
Medium portlight, 10” x 19”
1221
1222 Drawing
1223 Drawing
Features
▪▪Pop up = 5 seconds mounting
▪▪Ventilates the boat (nets)
▪▪Fast mounting with suction cup
▪▪Easy to store, folds to 1/3
▪▪Works on flushed hatches
▪▪Fits all brands of hatches
▪▪Mounts from the inside
1510
1510 Storage Pouch
Waterline Blackout Curtains
Fits both fixed and open able hatches. Since the curtain is
supposed to be bigger than the hatch (with a small overlap)
the size is universal and fit most shapes of hatches, square,
round, rectangular and small. On smaller hatches the
overlap will be a little bigger. On deep hatches you need
to prolong the suction cup with a small string (incl. in the
package). Every curtain comes with storage bag.
▪▪Silver outside keeps heat/cold out
▪▪Works also on deep hatches
▪▪No peering in
▪▪Dark when you sleep
WAT 1510
WAT 1515
WAT 1530
WAT 1535
Foredeck hatch, 24” x 24”
Large foredeck hatch, 28” x 28”
Portlight window, 12” x 16”
Large portlight window, 10” x 27”
1515
1530
1535
Rope / Mooring / Anchoring
193
ANCHOR MARINE
194
CHAIN
194
ENGLISH BRAID
195
GLOMA
195
GREENFIELD
195
MAFFIOLI
197
MAX POWER
198
MAXWELL
205
NOVABRAID
210
OSBORNE
213
PANTHER Rope Cutting Gun
213
ROCNA ANCHORS
215
SAMSON
217
SAIL TWINE
219
TITAN SHACKLES
220
TRANSAT ANCHORS
221
TRANSAT FENDER HANGERS
221
194
Anchor Marine / CMP Global
Anchor Marine
CMP Global
CMP Global Grade 30 Galvanized Chain
Anchor Marine Step Fenders
▪▪Can be used either as a fender or as a handy
step to assist boarding
▪▪3 reinforced eyes for fastening which
contributes to stability
▪▪Heavy duty marine vinyl
▪▪Height: 21" Width: 17"
Size
Length
Working
Load
Weight
per 100’
CHN CMG31/4"X141'
1/4"
141'
1,300 lbs
71 lbs
CHN CMG35/16"X92'
5/16"
92'
1,900 lbs
100 lbs
Anchor Marine Stern Fenders
CHN CMG33/8"X63'
3/8"
63'
2,650 lbs
152 lbs
▪▪1/2" centre rope hole
▪▪4 reinforced eyes for fastening which
contributes to stability
▪▪Heavy duty marine vinyl
▪▪L: 21-1/2" x W: 8-1/2" x H: 8-1/2"
CHN CMG31/2"X36'
1/2"
36'
4,500 lbs
265 lbs
CMP Global Grade 43 Galvanized Chain
AMP 0043White
AMP 0043RB
Royal Blue
Rope / Mooring / Anchoring
▪▪ISO hot dip galvanized
▪▪Sold by the foot or barrel
▪▪Comes in a re-usable plastic pail
AMP 0203White
AMP 0204Blue
Part #
▪▪ISO high test, hot galvanized
▪▪Calibrated for windlasses
▪▪High carbon steel
▪▪Sold by the foot or barrel
Part #
Size
Length
CHN CMG41/4
1/4”
Cut
CHN CMG41/4”X800'
1/4”
800’
CHN CMG45/16
5/16”
Cut
CHN CMG45/16X300'
5/16”
300'
CHN CMG45/16”X550'
5/16”
550’
CHN CMG43/8
3/8”
Cut
CHN CMG43/8”X400'
3/8”
400’
CHN CMG41/2
1/2”
Cut
CHN CMG41/2”X200'
1/2”
200’
Working
Load
Weight
per 100’
2,600 lbs
75 lbs
3,900 lbs
107 lbs
5,400 lbs
152 lbs
9,200 lbs
256 lbs
English Braid / Gloma / Greenfield
English Braid
195
Gloma
English Braid Whipping Twine
Waxed polyester whipping twines in two
weights (#4 & #8) of white or solid colours.
▪▪Length: 50 & 25m.
Gloma Anchor Swivels
W
E
Standard #4 50m
Black #4 50m
Blue #4 50m
Red #4 50m
Yellow HP 50m
White Heavy #8 25m
N
ENG 36019010000
ENG 36019010900
ENG 36019010910
ENG 36019010960
ENG 36019010980
ENG 36029010000
▪▪316 stainless steel anchor swivel fitted with
double threaded flush fitting pins
▪▪Smooth profile avoids snagging
GLO 801 GLO 802
GLO 803
1/4" - 5/16"
5/16" - 3/8"
3/8" - 1/2"
► Also See
Gloma Shackles pg 296
Greenfield
Assorted lengths & colours.
ENG 20280022000
ENG 20350015000
ENG 22250030900
ENG 22250030910
ENG 22250030912
ENG 22250030928
ENG 22250030960
ENG 22250030980
K28 White, 2.8mm, 22 meters
K35 White, 3.5mm, 15 meters
R25 Black, 2.5mm, 30 meters
R25 Blue, 2.5mm, 30 meters
R25 Navy, 2.5mm, 30 meters
R25 Green, 2.5mm, 30 meters
R25 Red, 2.5mm, 30 meters
R25 Yellow, 2.5mm, 30 meters
Greenfield Anchor Buddy
The anchor rope that stretches from 14 feet to 50 feet. Works with
ski boats, fishing boats, sail boats, patio boats, rafts, and jet skis
up to 4,000 lbs. Works in lakes, rivers, and the ocean. Enables you
to anchor straight down. The shock is taken out of your anchor
line and the anchor isn't pulled loose in waves and swells as with a
straight line.
English Braid 3-Strand Polyester
GRN AB4000-RB
This popular rope is constructed from a special polyester fibre laid
into a 3 strand configuration with the appearance of a quality hemp or
Jute rope, yet without the disadvantage of instability of a natural fibre
rope. The natural appearance of the rope is attractive to individuals
looking for a traditional rope, while the spun fibre offers a cover that
is softer on the hands and provides additional grip.
▪▪Specific gravity: 1.38
Part #
Size
Breaking
Strength (kg)
Length
ENG 47060300000
6MM (1/4")
580
984'
ENG 47080300000*
8MM (5/16")
1,320
984'
ENG 47100220000*
10MM (3/8")
1,500
720'
ENG 47120165000*
12MM (1/2")
2,550
495'
ENG 47140110000*
14MM (9/16")
3,100
360'
ENG 47160085000*
16MM (5/8")
3,800
280'
ENG 47180110000*
18MM (3/4")
4,100
360'
ENG 47200110000*
20MM (7/8")
4,600
360'
ENG 47240110000*
24MM (1")
5,500
360'
* Request Items
Greenfield Grapple Buddy
▪▪Galvanized steel
▪▪Complete with 50' nylon line
▪▪Height: 8-3/4" x Width: 8"
GRN GB-G
Rope / Mooring / Anchoring
English Braid Polyester Line
197
Maffioli
N
E
W
Yachting Line RACING
Excellence in rope manufacturing since 1926
New ideas, solid tradition, great experience, advanced
technology and materials, strict quality controls: these
have been the corner stones for our activity from 1926.
Gottifredi Maffioli manufactures a wide range of high
quality ropes, braids, twins and twisted yarns made of
high tenacity synthetic fibres. Thanks to our extensive
experience, our comprehensive range of machinery and
our constant activity of testing of new materials and
development of innovative techniques, we are capable
of producing nearly any type of rope, from tiny sewing
threads to large diameter mooring lines.
Our extremely innovative One Design lines are imitated
all over the world. We are talking about the famous Swift
“concept”, available in the single braid version (Swiftcord)
One design line includes also a full range of products
specifically designed for these type of boats.
Lightweight, strength, durability and comfort:
these are the keywords for Swiftcord.
▪▪Construction: Single braid
▪▪Core: Dyreema® + non slip fibre
▪▪Characteristics: Extremly lightweight, good durability and great
comfort
Reel
▪▪Sold by the foot
200 m (656')
Size
Colour
daN
g/m
MAF TRSWIF050-AZ
5mm
Light Blue
0.835
13.7
MAF TRSWIF050-BK
5mm
Black
0.835
13.7
MAF TRSWIF050-RD
5mm
Red
0.835
13.7
MAF TRSWIF060-AZ
6mm
Light Blue
1.250
19.0
MAF TRSWIF060-BK
6mm
Black
1.250
19.0
MAF TRSWIF080-AZ
8mm
Light Blue
2.300
31.2
MAF TRSWIF080-BK
8mm
Black
2.300
31.2
MAF TRSWIF080-RD
8mm
Red
2.300
31.2
MAF TRSWIF100-AZ
10mm
Light Blue
3.600
46.9
MAF TRSWIF100-BK
10mm
Black
3.600
46.9
Maffioli Whipping Twine
▪▪1.4 mm polyester braid in 20 meter lengths
▪▪Convenient storage/dispensing case
MAF TRSCFC0014KTBKBlack
MAF TRSCFC0014KTWHWhite
Powergrip 78 is a perfect Solution for high loads halyard:
thanks to the excellent characteristics of the Dyneema®
SK78 core in addition to the special cover in blend HT
Polyester/Cordura® branded fibers.
▪▪Construction: Double braid
▪▪Core: Polyurethane coating Dyneema® SK78
▪▪Cover: H.T. Polyester + Cordura® branded fibers
▪▪Characteristics: Good abrasion resistance, very good grip
for a comfort handling
Reel
▪▪Sold by the foot
200 m (656')
Part #
Maffioli Swiftcord
Part #
Maffioli Powergrip 78
Size
Colour
daN
g/m
MAF TRPWGR080-AZ
8mm
Light Blue
3.380
45.4
MAF TRPWGR080-GA
8mm
Dark Grey
3.380
45.4
MAF TRPWGR080-RD
8mm
Red
3.380
45.4
MAF TRPWGR100-AZ
10mm
Light Blue
5.150
64.7
MAF TRPWGR100-GA
10mm
Dark Grey
5.150
64.7
MAF TRPWGR100-RD
10mm
Red
5.150
64.7
MAF TRPWGR120-AZ
12mm
Light Blue
6.950
92.1
MAF TRPWGR120-RD
12mm
Red
6.950
92.1
Maffioli Powertech 78
The new Powertech 78 has been designed to offer a perfect
solution for both high loads sheets and halyards. The key feature
of this versatile rope is heat resistant Technora®/Polyester cover
in addition to the high-tech Dyneema® SK78 core.
▪▪Construction: Double braid
▪▪Core: Polyurethane coating Dyneema® SK78
▪▪Cover: Technora® + H.T. Polyester
▪▪Characteristics: Excellent abrasion and heat resistance, good
grip on winches
Reel
200 m (656')
▪▪Sold by the foot
Part #
MAF TRPWTH080-AZ
Size
Colour
daN
g/m
8mm
Light Blue
3.380
49.7
MAF TRPWTH080-RD
8mm
Red
3.380
49.7
MAF TRPWTH100-AZ
10mm
Light Blue
5.150
70.6
MAF TRPWTH100-RD
10mm
Red
5.150
70.6
daN = deka-Newtons to lbs force (breaking strength) (conversion factor = 2.24)
g/m = grams per metre (conversion factor to lbs/100' = 0.0672)
Rope / Mooring / Anchoring
Yachting Line ONE DESIGN
Our Racing line is dedicated to all those sailors who are
looking for top performance on board. These products
are designed to provide maximum performance on small
monotypes and modern cruiser racer. Racing line products
offer excellent performance, ensuring extremely low
elongation in both racing and cruising.
THRUSTITTOTHEMAX
Electric
Tunnel Thrusters
• Customdesignedmotor
• Maintenancefreedriveleg
• Case-hardenedspiro-conicalgears
• Lownoiseemission
• Lightweightcompositeconstruction
• Noanode,nooilreservoir
• Fullrangeforallboatsizes
SternPod
Control Panels
TunnelThruster
• Wirelessoptions
• Waterresistant
• Childproofactivation
• Autoshutdown
• Motoroverheatwarning
Accessories
• Fuses
• Tunneladapters
CompactRetractable
VIPRetractable
w w w. m a x - p o w e r. c o m
• Tunnels
MAX Power Thrusters
199
Select the Right Thruster
Rope / Mooring / Anchoring
200
MAX Power
MAX Power Composite Tunnel Thrusters
Electric bow and stern thrusters are the most prevalent thrusters on the market; Max
Power’s ultimate advantage is its maintenance free composite drive leg and custom
manufactured high efficiency DC motors. Coupled with the Max Power control panel,
this new control mechanism extends the thrusters life; programmed logic allows you to sit
in your cockpit with confidence while your thruster does the work.
▪▪Custom designed motor
▪▪Maintenance free drive leg
▪▪Case-hardened spiro-conical gears, low noise emission
▪▪Lightweight composite construction
▪▪No anode or oil reservoir
CT45
CT 60
CT 35
Rope / Mooring / Anchoring
Part #
MXP 42529
MXP 317603
MXP 42530
MXP 42532
MXP 42533*
Manufacture #
CT 35
CT45
CT 60-12
CT 80-12
CT 80-24
Thrust to (kg/lbs)
35/77
40/88
58/128
69/152
75/165
Propellers
mono
duo
mono
duo
duo
Power (kw/hp)
2.69/3.6
3.23/4.3
4.35/5.8
4.79/6.4
5.28/7.1
Voltage
12
12
12
12
24
Boat Lengths
32’
19'-36'
23’ - 33’
26’ - 40’
26’ - 43’
A/B/C/D (mm)
190/140/210/125
190/140/210/125
210/140/275/185
210/140/275/185
210/140/275/185
E (Thickness)
4-5
4-5
6-7
6-7
6-7
CT 80
Part #
CT 100
CT 225
CT 165
CT 325
MXP 42534
MXP 42535
MXP 317557*
MXP 317558
MXP 42542*
Manufacturer #
CT 100
CT 125
CT 165
CT 225
CT 325*
Thrust to (kg/lbs)
96/212
115/254
160/353
195/430
255/562
Propellers
duo
duo
duo
duo
duo
Power (kw/hp)
7.1/9.5
8.56/11.5
11.88/15.9
14.96/20
17.6/23.9
Voltage
12
24
24
24
24
Boat Lengths
40’ - 50’
40’ - 59’
43’ - 63’
50’ - 68’
65’ - 85’
A/B/C/D (mm)
250/200/365/185
250/200/365/185
250/200/430/250
270/200/405/250
250/250/480/315
E (Thickness)
6-7
6-7
7-8
7-8
9 - 10
* Request Item
-Tubes, controls & connection cables are ordered separately for all thrusters-
MAX Power
201
MAX Power Retractable ‘Compact Retract’ Thruster
The first electric retractable thruster designed for yachts 37’- 45’, will allow all
yachtsmen to benefit from both a thruster and a preserved hull line.
▪▪Compact
▪▪Maximum thrust due to ideal immersion depth
▪▪Lightweight composite materials used
▪▪High resistance spiro-conical gears
▪▪Invisible and simple installation, hull form preserved in original state
▪▪Electronic control box centralizing all functions and security features
▪▪Comes complete with multi-function remote control
**Connection cables are ordered separately
Part #
MXP 317821*
Power rating (hp/kW)
4.3/5.8
Thrust up to (kg/lbs)
70/154
Propellers
duo
Voltage
12
* Request Item
Max Power´s Stern Pod units have been designed with the aim of simplifying
installation. The Stern Pod is a single pre-assembled unit which can be directly fitted
from the outside of the transom thus requiring little access to the inside of the boat.
Moreover, the Stern Pod has been assembled with its drive leg coupling and motor at
the factory, thereby ensuring a guaranteed assembly process. Waterproof to IP65, the
thrusters motor is protected from water and the corrosive atmosphere in the bilge.
Part #
MXP 317625*
MXP 317626*
MXP 317628*
MXP 317630*
MXP 317631*
MXP 317632*
Manufacturer #
Pod 45
Pod 60
Pod 80
Pod 100
Powd 125
Pod 165
Typical Boat Size
20' - 34’
25' - 39’
28' - 46’
32' - 51’
34' - 59’
40' - 66'
Tunnel Diameter
125 mm
185 mm
185 mm
185 mm
185 mm
250 mm
Thrust up to (kg/lbs)
40 / 88
58 / 128
75 / 165
96 / 211
115 / 253
160 / 352
Hp
4.3
5.8
7.1
9.5
11.5
15.9
Voltage
12
12
24
12
24
24
Weight
21 kg
31 kg
31 kg
41 kg
41 kg
61 kg
* Request Items
Rope / Mooring / Anchoring
MAX Power Composite Stern Pod Tunnel Thrusters
202
MAX Power
MAX Power Control Panels
The bow & stern thruster control panel has been designed to extend
the life of your thruster through built in safety mechanisms. The
weatherproof panels clip on faces are designed to aesthetically
integrate into the dashboard of your boat.
▪▪Childproof activation
▪▪Automatic shutdown after 30 minutes of activity
▪▪Remote battery isolator control
▪▪Visual & audio motor overheat alarm
▪▪Plug-n-play connectors and colour coded wiring
▪▪Intelligent time delay between port and starboard thrust
MXP 318200
MXP 318201
MXP 318202
MXP 318203
MXP 318204*
MXP 318205
MXP 318234
Push button panel, Black
Push button panel, Grey
Single joystick, Black
Single joystick, Grey
Double joystick, Black
Double joystick, Grey
Toggle panel, Black
MXP 312929
MXP 312930
Joystick boot w/o stop, grey
Joystick boot w/o stop, black
Parts:
Rope / Mooring / Anchoring
* Request Item
318204
318200
Max Power’s radio remote control is designed to work with the entire range of
Max Power tunnel and retractable thrusters. The remote control can also be used to
operate other onboard equipment such as: windlasses, passerelles, cranes, etc.
▪▪Supports up to 8 independently controlled channels
▪▪Each receiver can switch four channels (12/24V 5A)
▪▪Each transmitter can handle two receivers (8 channels)
▪▪Digital recognition avoids accidental activation of other systems
▪▪Transmitter power supply: 2 lithium batteries 3V (CR2430) included
▪▪Receiver power supply: 12/24V DC
▪▪Zero power consumption when in standby mode (transmitter)
▪▪Splash proof
Complete kit (receiver & transmitter)
Spare remote (receiver)
MAX Power Composite Tunnel Thruster Tubes
Model Type
CT 35 / CT45
CT 60 / CT 80 / CT 100 / CT 125
CT 165 / CT 225
Diameter
125mm
185mm
250mm
-
-
Tunnels lengths
500mm
MXP 42546
750mm
MXP 42547
MXP 42549
-
1000mm
-
MXP 42550
MXP 42553
1500mm
-
MXP 42551
MXP 42554*
* Request Item
318234
318202
Safety
All models incorporate the total logic safety device, enabling communication
between thruster and helm. Visual and audio alarms provide a 10-second
warning before the overheat shutdown facility is activated.
MAX Power Multifunction 915Mhz Radio Remote Control
MXP 312974
MXP 312970
318205
203
MAX Power
MAX Power Fuses
Model Type
CT 35/45
CT 60
CT 80
CT60/80
CT 100
CT 125
CT 165/225
CT 325
Voltage
12V
12V
12V
24V
12V
24V
24V
24V
Fuse Amps
125
160
200
125
315
200
250
400
Fuses
MXP 35021
MXP 35019
MXP 35020
MXP 35021
MXP 35022
MXP 35020
MXP 35027
MXP 35028
Holder Type
T1
T2
T1
T2
Fuse Holder #
MXP 35017
MXP 35018
MXP 35017
MXP 35018
Accessories:
MXP 312882
Fuse extraction handle
Blue Sea Systems ANL Fuses
CT 35/45
CT 60
CT 80
CT60/80
CT 100
CT 125
CT 165/225
CT 325
Voltage
12V
12V
12V
24V
12V
24V
24V
24V
250
Fuse Amps
Fuses
BSS 5131
300
BSS 5133
300
BSS 5133
200
500
BSS 5129
BSS 5137*
300
BSS 5133
500
BSS 5137*
Rope / Mooring / Anchoring
Model Type
-
-
BSS 5503
Fuse Holder #
* Request Items
MAX Power Accessories
MAX Power Stern Adapters
MXP 312882
Fuse extraction handle
MXP 312781
6 wire control loom cable, per foot
MXP 317602
Y-Connectors, each
MXP MPOP3218** Cable connectors, each
MXP 42545
Auto battery coupler 12/24V
MXP 315300
Anode for all models
MXP 311363
Motor thermo switch
MXP 315308
Th ruster controller compl, 2004 Fuse holder shown
MXP 315389*
MXP 315392*
MXP 35016
MXP 310255
MXP 310254
MXP 310253
Gasket leg/tunnel D125
Gasket leg/tunnel D185
Gasket leg/tunnel D325
MXP 315318
MXP 310376
MXP 35034
MXP 35035
MXP 315321
Leg for CT35
Leg for CT45
Leg for CT60
Leg for CT80/100
Leg for CT165/225
MXP 312053
MXP 35031
MXP 35033
MXP 35030
MXP 312058
Propeller D185 pin 5x40
Propeller D185 with screw
Propeller D315
Propeller D125
Propeller pin 4x28 series 35
** Limited Quantities
▪▪ Heavy duty electric switching and
battery isloation
MXP 318400*
MXP 318401*
* Request Items
12V
24V
W
Complete relay CT35/CT45
Complete relay CT60/80 12V
Complete relay CT80 24V
Complete relay CT100/VIP 12V
Complete relay CT125/VIP 24V
Complete relay SP225 24V
E
MXP 315325
MXP 315326
MXP 315327
MXP 315328
MXP 315329
MXP 315331
MAX Power Solenoid Switches
N
with extractor
* Request Items
125mm stern adapter
185mm stern adapter
Install kit
MAXWELL RC SERIES
ROPE/CHAIN WINDLASSES
RC6
SPECIFICATIONS
RC8
SPECIFICATIONS
RC10
SPECIFICATIONS
Model
RC6
Model
RC8 8mm - 5/16”
Model
RC10-8 8mm - 5/16”
RC10-10 10mm - 3/8”
Maximum Pull
300kg - 770lbs
Maximum Pull
600kg - 1320lbs
Maximum Pull
700kg - 1540lbs
850kg - 1870lbs
Static Hold
700kg - 1540lbs
Static Hold
1200kg - 2640lbs
Static Hold
1500kg - 3300lbs
1500kg - 3300lbs
Chain Short Link
6mm/7mm - 1/4”
Chain Short Link
8mm - 5/16”
Chain Short Link
8mm - 5/16”
10mm - 3/8”
12mm - 1/2”
Rope Size (Nylon)
14mm - 9/16”
Rope Size
14mm - 9/16”
16mm - 5/8”
Rope Size (Nylon)
(3 strand or 8 plait recommended)
(3 strand or 8 plait recommended)
Chain Speed (Anchor Retrieval)
24m/min - 79ft/min
Chain Speed (Anchor Retrieval)
32m/min - 105ft/min
Chain Speed (Anchor Retrieval)
24m/min - 79ft/min
24m/min - 79ft/min
Rope Speed (Anchor Retrieval)
21m/min - 69ft/min
Rope Speed (Anchor Retrieval)
28m/min - 92ft/min
Rope Speed (Anchor Retrieval)
20m/min - 65ft/min
20m/min - 65ft/min
Power Supply (DC)
12V or 24V
Power Supply (DC)
12V or 24V
Power Supply (DC)
12 or 24V
12 or 24V
Motor Power
500W
Motor Power
1000W
Motor (Watts)
1000W
1200W
Net Weight
8.5kg - 18.7lbs
Net Weight
16.5kg - 36.3lbs
Net Weight
19kg - 42lbs
20kg - 44lbs
No need to worry about what chain your
customer is using, with our revoutionary new
rope/chainwheel your customer can use any
short link marine chain - G4, Metric, BBB or
proof coil. That’s right... no more phone calls
“will my 1/4” chain fit this windlass?”
www.maxwellmarine.com
MAXWELL’S REVOLUTIONARY NEW CHAIN WHEEL
Maxwell Wave Design™ chainwheel. This patented rope/chain wheel
incorporates two unique design concepts that greatly improve the
handling and control of the rope/chain spliced rode.
Visit our website to find out exactly how our chainwheel works
205
Maxwell
Maxwell RC6 Rope/Chain Windlass
▪▪Features Maxwell’s revolutionary, and patented, new Wave Design chainwheel
▪▪Designed with the smaller, trailer boat market in mind
▪▪The in-line, vertical gearbox and motor means quick and easy installation by
either the boat yard or the DIY aftermarket customer
▪▪The RC6 is a Low Profile unit (no optional capstan drum)
▪▪Comes with top works, motor/gear box and dual direction solenoid (Switches and circuit breaker are ordered separately)
▪▪Exclusive Maxwell 3 Year warranty
▪▪For complete specifications see previous page
MAX RC6-12V
RC10 Series
Maxwell RC8 & RC10 Series Rope/Chain Windlasses
▪▪The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters
▪▪Sleek, Low Profile and MAX-Grip capstan drum versions are available to suit individual user preference.
▪▪Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.
▪▪Dual direction, power up and down operation via helm station controls or foredeck foot switches (available option).
▪▪Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.
▪▪Cone type clutch/brake mechanism permits manual, ‘free fall’ Sealed oil bath and marine-grade hard anodised, alloy
gearbox provides high efficiency output drive via precision worm and wormwheel.
▪▪Exclusive Maxwell 3 YEAR Limited Warranty
▪▪For complete specifications see previous page
MAX RC8-6-12V
1/2" rope x 1/4" chain
MAX RC8-8-12V
5/8" rope x 5/16" chain
MAX RC10-8-12V
5/8” rope x 5/16” chain
MAX RC10-8-12VCAPW/Capstan
MAX RC10-10-12V*
5/8” rope x 3/8” chain
MAX RC10-10-12VCAP*W/capstan
Standard Equipment:
Dual direction solenoid pack
Circuit breaker/isolator panel
Up/down remote control panel
Emergency crank/clutch release handle
* Request Items
Dimensions
Model
RC6-12V
RC8-8-12V
RC10/8-12V
RC10/10-12V
A
7-3/4" (196mm)
8-5/16" (210mm)
9-1/8” (230mm)
3-1/2” (89mm)
B
3-3/16" (80mm)
3-5/16" (83mm)
B (with capstan)
N/A
5-3/4" (146mm)
7” (178mm)
C
5-3/4" (145mm)
6-3/16" (156mm)
6-3/4” (170mm)
D
8-1/8" (205mm)
8-1/4" (208mm)
7-7/8” (201mm)
E
2-1/2" (65mm)
2-1/2" (65mm)
10-3/4” (272mm)
F
1-9/16" (39mm)
1-5/8" (40mm)
16-3/4” (424mm)
Motor offset
N/A
10-3/4" (272mm)
2-1/2” (65mm)
Rope / Mooring / Anchoring
RC8 Series
206
Maxwell
Maxwell Horizontal Rope/Chain Windlasses
HRC 10
Standard Equipment
▪▪Up/down remote control panel
▪▪Dual direction control system
▪▪Circuit breaker/isolator panel
▪▪Exclusive Maxwell 3 Year warranty
MAX HRCFF612V*HRC-6
MAX HRCFF812VHRC-8
N
Specifications
W
HRC10 Series Windlass
E
Rope / Mooring / Anchoring
▪▪Now incorporating Maxwell's automatic free-fall technology (HRC 6/8 only). Simply
activate the windlass 'free fall' lever, operate your down control (helm station or foot- switch)
and the windlass will freefall your anchor. Ready to lift the anchor? Activate the up control
and the 'free fall' device automatically disengages allowing you to power up your anchor
▪▪Die cast, marine-grade, alloy case is hard anodized for unsurpassed marine protection.
Simple 'bolt down' installation ensures effortless and rapid on-deck
HRC 6/8
installation and set up
▪▪Guarranteed trouble free rode transition from rope to chain, by
means of an innovative, proven and patented pressure arm system,
within a safe enclosed design
▪▪Integrated composite nylon (HRC 6/8 only), through deck hawse
pipe for ease of installation and smooth, snag-free operation
▪▪High efficiency spur gearbox incorporating a robust non-backwind
mechanism. High speed, jam-free retrieval of rope and chain
controlled from a remote panel mounted Up/Down switch
▪▪Emergency 'free fall' function in the event of on board power failure
▪▪Revolutionary new chainwheel
▪▪Heavy duty, dual direction motor incorporating new technology
features, including integrated wiring for quick electrical installation,
is easily removed for simple routine electric brush maintenance
All new HRC10 Horizontal Series fully automatic rope/chain
windlasses have been designed to meet the demands for use
on larger vessels up to 16 metres (52 feet), which require a
completely above deck installation system. The HRC10’s
flawlessly handle rope up to 16mm (5/8") and chain up to 10mm
(3/8") in size, including the thick rope to chain splice.
▪▪The stainless steel pressure arm always exerts maximum
control pressure on the rode (rope, splice or chain)
MAX HRC10812V* HRC10, w/rope drum
* Request Items
Model
HRC-6
Maximum Pull
HRC-8
410kg (900lbs)
Chain
6mm (1/4")
8mm (5/16”)
Rope Size
12mm (1/2”)
14mm (9/16”)
Line Speed
Power
33m/min (108ft/min)
12
12/24V
Motor Watts
Breaker
Weight
600W
50 Amp
HRC-10
700kg (1870lbs)
8mm (5/16")
14mm (9/16")
20m/min (65ft/min)
12/24V
1000W
70 Amp
11.5kg (25lbs)
19kg (42lbs)
Maxwell Capstan Anchormax Winch
An extremely versatile vertical or horizontal (clockwise-non-reversing) capstan or general purpose electric winch for use as an anchor
winch, pot hauler or davit winch. Utilizes a fully sealed gearbox driven by a vertically mounted, high efficiency permanent magnet motor
that generates up to 386 kg (850 lbs) of line pull. Manufactured in durable anodized marine aluminium with chrome manganese bronze
top parts. Comes complete with foot switch & circuit breaker/isolator panel
▪▪Exclusive Maxwell 2 Year warranty
MAX ANCHORMAX
Maximum line pull..........386kg (850lb)
[email protected] nominal working load 76’/min
Voltage..........................12V
Power............................600W
Weight...........................8kg (17.6lb)
Maximum boat LOA.......10m (33ft)
Max. boat weight...........4 tonnes
Maxwell
207
Maxwell Auto Anchor 560
Maxwell Standard On/Off Breaker Panels
Panel mount rode counter for electric or
hydraulic windlasses using all-chain or rope/
chain rode.
▪▪Preset stopping point and docking alarm
on retrieval
▪▪One-touch function to deploy and retrieve
a preset length of rode
▪▪Adjustable back lit display in feet, metres or fathoms
▪▪Graphic LCD screen featuring intuitive user interface for simple
operation
▪▪Displays windlass speed and direction
▪▪Safety lock to help protect against accidental windlass deployment
▪▪Logs windlass operation hours to help ensure regular windlass
maintenance
▪▪Weather cover and choice of black or gray console.
▪▪Kit includes console, sensor and magnet
A thermally operated (manual reset) 12 volt breaker provides
reliable, automatic over current protection. This black panel comes
complete with a power-on indicator light and is included with all
windlasses except the 500 series.
▪▪Panel size: 4" H x 4" W
MAX P102944
500 series:
12 volt include:
*Note A sensor extension cable (ordered separately) must be used to connect
the sensor to the console unit (see parts below)
12V or 24VDC
Maxwell Waterproof Foot Switches
Switch with Trim Ring
▪▪Trim ring diameter: 4", depth: 2-1/4"
▪▪S/S wood screws included
MAX P19001
Stainless steel trim ring
Switches with Covers
80 amp breaker
135 amp breaker
Maxwell Reversing Solenoids
Use these parts on all Maxwell winches if dual
direction is required.
All models except 500 series:
12 volt include:
MAX P19045 12 Volt S.W. reversing solenoid
MAX P19001 Foot switch
MAX P100711 P.M. reversing solenoid
MAX P19001 Foot switch
Maxwell
Nylon Brait Rope and Chain
MAX BRC-1/2”X175’
MAX BRC-1/2”X200’
MAX BRC-1/2”X250’
MAX BRC-5/8”X250’
1/2” x 150’ Brait & 1/4” x 25’ chain
1/2” x 150’ Brait & 1/4” x 50’ chain
1/2” x 200’ Brait & 1/4” x 50’ chain
5/8” x 200’ Brait & 5/16” x 50’ chain
▪▪Hinged, protective cover that guards against
accidental use of the windlass
▪▪Cover diameter: 4-1/4” with a 3/4" hinge pocket
Maxwell
Proset 3-Strand Nylon Brait Rope and Chain
MAX P19006
MAX P100735
Black cover
Stainless steel cover
MAX PRC-5/8"X250'
MAX PRC-5/8"X350'
MAX 2343
MAX SP1387
Replacement diaphragm
Hinged cover, White
Maxwell Pressure Arm Replacement Kit
Parts:
Maxwell Toggle Style Up/Down Remote Panel
Designed for use with all models of Maxwell
windlasses using a dual direction control kit. Can be
wired together for multiple station application. Red
light indicates power on.
▪▪Panel size: 3-5/16” H x 2-3/8” W
MAX P19220
12 volt
Maxwell Up/Down Control
Easy to use, panel-mounted Up/Down switches
for remote windlass operation from the helm, fly
bridge or cockpit.
▪▪Suitable for use with dual-directional solenoids
▪▪Manufactured from marine-grade materials
▪▪Splash proof
▪▪Suitable for 12 and 24 VDC
MAX P102938*
* Request Item
5/8" x 200' Proset & 5/16" x 50' chain
5/8" x 300' Proset & 5/16" x 50' chain
For the RC500/RC800 Freedom series winches.
Contains 1 ea. pressure arm, pressure arm clip
and clip insulator.
MAX P100019
Rope / Mooring / Anchoring
Foot operated, waterproof deck switches for all anchor windlasses.
These heavy duty (150 amps continuous) switches do not require
additional solenoids. Mounts into a 2" diameter hole. 3/8" stud
terminals. 12 to 24 volts.
MAX P100790
MAX P100791
e
H only
HRC10-10
H only
HRC10-8
H only
HRCFF8
H only
HRCFF7
H only
HRCFF6
V only
V only
RC12-12
V only
RC12-10
V only
RC10-10
V only
RC10-8
V only
RC8-8
V only
RC8-6
RC6
V only
♦
♦
♦
♦
■
3500
V and H
■
♦
2500
V and H
■
♦
♦
♦
1500
V only
♦
■
♦
♦
♦
♦
H - Horizontal Configuration
♦
10/11mm 13mm
3/8”
1/2”
♦
■
♦
♦
♦
♦
8mm
5/16”
V - Vertical Configuration
♦
♦
♦
♦
♦
6/7mm
1/4”
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
Heavy
Light
METERS 4.5
FEET 15
7.6
25
9.2
30
10.7
35
12.2
40
13.7
45
15.3
50
16.8
55
HEAVY DISPLACEMENT - Refers to a vessel which is relatively heavy in weight compared to its overall length
= May be used on larger light displacement vessels providing rode is mainly rope
LIGHT DISPLACEMENT - Refers to a vessel which is relatively light in weight compared to its overall length
6.1
20
18.5
60
20
65
21.5
70
All Maxwell windlasses are
RODE counter ready with sensor
hole drilled and magnet fitted
22.8
75
and/or high windage will require larger windlasses. All systems assume the use of
a chain stopper, chain snubber or mooring cleat to remove the load from the winch
when setting or breaking the anchor loose. The maximum pulling capacity of the
windlass should not be less than three times the total weight of the ground tackle.
Should you require any assistance or information, please do not hesitate to contact
Maxwell Marine or any one of our distributors or service centres world-wide.
BOAT LENGTH
Please note: Size, displacement and type of vessel, as well as
anchoring conditions, must be taken into consideration when
selecting an anchor winch. Vessels of heavy displacement
This chart serves as a basic guide to assist in selecting the
appropriate anchor winch system for your boat.
WINDLASS AND CAPSTAN SELECTION CHART
Use of short link chain is essential
CHAIN SIZE
1000
V only
■
Chain
This chart refers to anchor windlass selection only. When selecting a stern capstan for the same boat, Maxwell uses one size smaller drive, or down to a
minimum of 50% of the pull rating of the windlass (unless specified otherwise).
■
■
■
■
■
VW10
V only
■
VC
■
500
V only
VW
■
All Rop
Chain
Automatic
Rope & Chain
HRC10
Automatic
Rope & Chain
HRCFF
6-7-8
AnchorMax
RC12
Automatic
Rope & Chain
RC10
Automatic
Rope & Chain
RC8
Automatic
Only
VWC
Rope &
Chain
RC6
Series, type & size
WINCH
HWC
Rope &
PERFORMANCE LINES FROM
Canada’s Premier roPe manufaCturer
MADE IN
www.novabraid.com
C A N A DA
Manufactured by Novatec Braids Ltd.
234 Water Street, Yarmouth, Nova Scotia, Canada B5A 4P8
210
Novabraid
Novabraid XLE Performer
XLE Performer Series is an extra low elongation, 100%
polyester double braid. This high tenacity polyester fibre rope
is easy to handle and splice while offering maximum abrasion
resistance. Colours are made of solution dyed polyester and are
available in red, green, blue and black. This super strong, low
stretch double braid is ideal for all running rigging applications on
performance cruisers and racing boats.
Reels are 600'. Order by the reel or by the foot.
Size
Colour
Tensile
Strength
NBR XLE316BKW
3/16”
Black/White
830 lbs
NBR XLE316BW
3/16”
Blue/White
830 lbs
NBR XLE316GW
3/16”
Green/White
830 lbs
NBR XLE316RW
3/16”
Red/White
830 lbs
NBR XLE316SB
3/16”
Grey/Blue
830 lbs
NBR XLE316WSB
3/16”
White/Grey/Blue
830 lbs
NBR XLE316W
3/16”
White
830 lbs
NBR XLE316WB
3/16”
White/Blue
830 lbs
NBR XLE316WBK
3/16”
White/Black
830 lbs
NBR XLE316WG
3/16”
White/Green
830 lbs
NBR XLE316WR
3/16”
White/Red
830 lbs
NBR XLE014BKR
1/4”
Black/Red
1,950 lbs
NBR XLE014SBK
1/4”
Black
1,950 lbs
NBR XLE014BKW
1/4”
Black/White
1,950 lbs
NBR XLE014BW
1/4”
Blue/White
1,950 lbs
NBR XLE014GW
1/4”
Green/White
1,950 lbs
NBR XLE014SB
1/4”
Grey/Blue
1,950 lbs
NBR XLE014SG
1/4”
Grey/Green
1,950 lbs
NBR XLE014SR
1/4”
Grey/Red
1,950 lbs
NBR XLE014RW
1/4
Red/White
1,950 lbs
NBR XLE014W
1/4”
White
1,950 lbs
NBR XLE014WBK
1/4”
White/Black
1,950 lbs
NBR XLE014WB
1/4”
White/Blue
1,950 lbs
NBR XLE014WG
1/4”
White/Green
1,950 lbs
NBR XLE014WSB
1/4”
White/Grey/Blue
1,950 lbs
NBR XLE014WR
1/4”
White/Red
1,950 lbs
NBR XLE516BKW
5/16”
Black/White
3,465 lbs
NBR XLE516BKR
5/16”
Black/Red
3,465 lbs
NBR XLE516BW
5/16”
Blue/White
3,465 lbs
NBR XLE516GW
5/16”
Green/White
3,465 lbs
NBR XLE516RW
5/16”
Red/White
3,465 lbs
NBR XLE516SB
5/16”
Grey/Blue
3,465 lbs
NBR XLE516SG
5/16”
Grey/Green
3,465 lbs
NBR XLE516SR
5/16”
Grey/Red
3,465 lbs
NBR XLE516W
5/16”
White
3,465 lbs
NBR XLE516WBK
5/16”
White/Black
3,465 lbs
NBR XLE516WB
5/16”
White/Blue
3,465 lbs
NBR XLE516WG
5/16”
White/Green
3,465 lbs
NBR XLE516WR
5/16”
White/Red
3,465 lbs
NBR XLE516WSB
5/16”
White/Grey/Blue
3,465 lbs
Rope / Mooring / Anchoring
Part #
Size
Colour
Tensile
Strength
NBR XLE038BKW
3/8”
Black/White
4,680 lbs
NBR XLE038BW
3/8”
Blue/White
4,680 lbs
NBR XLE038GW
3/8”
Green/White
4,680 lbs
NBR XLE038RW
3/8”
Red/White
4,680 lbs
NBR XLE038SB
3/8”
Grey/Blue
4,680 lbs
NBR XLE038SG
3/8”
Grey/Green
4,680 lbs
NBR XLE038SR
3/8”
Grey/Red
4,680 lbs
NBR XLE038W
3/8”
Solid White
4,680 lbs
NBR XLE038WB
3/8”
White/Blue
4,680 lbs
NBR XLE038WBK
3/8”
White/Black
4,680 lbs
NBR XLE038WG
3/8”
White/Green
4,680 lbs
NBR XLE038WR
3/8”
White/Red
4,680 lbs
NBR XLE038WSB
3/8”
White/Grey/Blue
4,680 lbs
NBR XLE038WY
3/8”
White/Yellow
4,680 lbs
NBR XLE716BKW
7/16”
Black/White
6,525 lbs
NBR XLE716BW
7/16”
Blue/White
6,525 lbs
NBR XLE716GW
7/16”
Green/White
6,525 lbs
NBR XLE716RW
7/16”
Red/White
6,525 lbs
NBR XLE716SB
7/16”
Grey/Blue
6,525 lbs
NBR XLE716SR
7/16”
Grey/Red
6,525 lbs
NBR XLE716WSB
7/16”
White/Grey/Blue
6,525 lbs
NBR XLE716W
7/16”
White
6,525 lbs
NBR XLE716WB
7/16”
White/Blue
6,525 lbs
NBR XLE716WBK
7/16”
White/Black
6,525 lbs
NBR XLE716WG
7/16”
White/Green
6,525 lbs
NBR XLE716WR
7/16”
White/Red
6,525 lbs
NBR XLE012BKW
1/2”
Black/White
9,000 lbs
NBR XLE012BW
1/2”
Blue/White
9,000 lbs
NBR XLE012GW
1/2”
Green/White
9,000 lbs
NBR XLE012RW
1/2”
Red/White
9,000 lbs
NBR XLE012SB
1/2”
Grey/Blue
9,000 lbs
NBR XLE012WB
1/2”
White/Blue
9,000 lbs
NBR XLE012WBK
1/2”
White/Black
9,000 lbs
NBR XLE012W
1/2”
White
9,000 lbs
NBR XLE012WG
1/2”
White/Green
9,000 lbs
NBR XLE012WSB
1/2”
White/Grey/Blue
9,000 lbs
NBR XLE012WR
1/2”
White/Red
9,000 lbs
NBR XLE916BKW
9/16”
Black/White
11,250 lbs
NBR XLE916WB
9/16”
White/Blue
11,250 lbs
NBR XLE916WG
9/16”
White/Green
11,250 lbs
NBR XLE916WR
9/16”
White/Red
11,250 lbs
NBR XLE058WB
5/8”
White/Blue
14,400 lbs
Part #
211
Novabraid
Novabraid Polyspec
Novabraid Nova Lite HP
Novabraid
A double braided rope constructed with a 100% polyester cover
and a 100% Spectra® 900 core. It is designed for general marine,
industrial, and commercial applications where extra low elongation
and extremely high strength to weight ratios are required. This
product often replaces wire of the same diameter.
▪▪Order by the 600' reel or by the foot
▪▪Specific gravity of 1.20
▪▪High strength to weight ratio
▪▪Extra Low elongation
Colour
Tensile
Strength
NBR PS316BGY
3/16”
Blue/Green/Yellow
1,950 lbs
NBR PS316BRY
3/16”
Blue/Red/Yellow
1,950 lbs
NBR PS316WBY
3/16”
White/Blue/Yellow
1,950 lbs
NBR PS316WRY
3/16”
White/Red/Yellow
1,950 lbs
NBR PS014BGY
1/4”
Blue/Green/Yellow
4,500 lbs
NBR PS014GBY
1/4”
Green/Blue/Yellow
4,500 lbs
NBR PS014RGY
1/4”
Red/Green/Yellow
4,500 lbs
NBR PS014WBY
1/4”
White/Blue/Yellow
4,500 lbs
NBR PS014WRY
1/4”
White/Red/Yellow
4,500 lbs
NBR PS516BGY
5/16”
Blue/Green/Yellow
7,500 lbs
NBR PS516GBY
5/16”
Green/Blue/Yellow
7,500 lbs
NBR PS516RGY
5/16”
Red/Green/Yellow
7,500 lbs
NBR PS516W
5/16"
White
7,500 lbs
NBR PS516WBY
5/16”
White/Blue/Yellow
7,500 lbs
NBR PS516WRY
5/16”
White/Red/Yellow
7,500 lbs
NBR PS038BGY
3/8”
Blue/Green/Yellow
9,800 lbs
NBR PS038GBY
3/8”
Green/Blue/Yellow
9,800 lbs
NBR PS038GRY
3/8”
Green/Red/Yellow
9,800 lbs
NBR PS038RGY
3/8”
Red/Green/Yellow
9,800 lbs
NBR PS038WBY
3/8”
White/Blue/Yellow
9,800 lbs
NBR PS038WGY
3/8”
White/Green/Yellow
9,800 lbs
NBR PS038WRY
3/8”
White/Red/Yellow
9,800 lbs
NBR PS716BGY
7/16”
Blue/Green/Yellow
11,700 lbs
NBR PS716RGY
7/16”
Red/Green/Yellow
11,700 lbs
NBR PS716WBY
7/16"
White/Blue/Yellow
11,700 lbs
Part #
Size
Colour
Tensile
Strength
NBR LTHP014GBK
1/4”
Green/Black
2,845 lbs
NBR LTHP014GY
1/4”
Green/Yellow
2,845 lbs
NBR LTHP014RBK
1/4”
Red/Black
2,845 lbs
NBR LTHP014RY
1/4”
Red/Yellow
2,845 lbs
NBR LTHP516GBK
5/16”
Green/Black
3,663 lbs
NBR LTHP516GY
5/16”
Green/Yellow
3,663 lbs
NBR LTHP516RG
5/16”
Red/Green
3,663 lbs
NBR LTHP516RY
5/16”
Red/Yellow
3,663 lbs
NBR LTHP516TP
5/16”
Teal/Purple
3,663 lbs
NBR LTHP038GBK
3/8”
Green/Black
5,000 lbs
NBR LTHP038GY
3/8”
Green/Yellow
5,000 lbs
NBR LTHP038RG
3/8”
Red/Green
5,000 lbs
NBR LTHP038RY
3/8”
Red/Yellow
5,000 lbs
Novabraid Sprint Cord
Constructed from a combination of Spectra 900 and solution dyed
polyester, Sprint Cord is light weight, low stretch, floating, smooth
handling, strong and durable. Recommended for use on spinnaker
sheet, jib sheet, cunningham, vang and control lines.
▪▪Order by the 600' reel or by the foot
Elongation at break
3mm = 13%
5mm = 13%
6mm = 15%
8mm = 17%
Size
Colour
Tensile
Strength
NBR SPR03B
3mm
Blue
885 lbs
NBR SPR05R
5mm
Red
2,375 lbs
NBR SPR06BK
6mm
Black
2,546 lbs
NBR SPR08B
8mm
Blue
3,407 lbs
Part #
Rope / Mooring / Anchoring
Size
Part #
Nova Lite High Performance is a double braided rope constructed
with a multi- filament polypropylene (MFP) cover and a blend of
Spectra®and MFP in the core. Designed for applications where a UV
resistant, light weight, low stretch and easily handled line is essential.
A urethane coating covers the core for protection when the cover
braid is stripped.
Reels are 600'.
▪▪Order by the 600' reel or by the foot
▪▪Light weight
▪▪Coated core
▪▪High strength
▪▪Low elongation
▪▪No water absorption
212
Novabraid
Novabraid Spectec 12
Novabraid XLE-Z Feel
A hollow braided 12-strand rope using 100% Spectra® 900 fibre
with a single ply construction. Spectec-12 yields one of the highest
strength to weight ratios available in a synthetic rope. It comes
standard with a urethane coating that provides additional abrasion
resistance while remaining easy to handle and splice.
▪▪Order by the 600' reel or by the foot
XLE-Z Feel Performer Series is an extra low elongation, 100%
polyester double braid. A DuPont Type 77 Dacron yarn is used
on its cover and SeaGard polyester in its core. XLE-Z Feel boasts
a higher strength than similar spun polyester braids while still
providing an excellent feel, wet or dry. Recommended for running
rigging applications that are frequently handled such as main
sheets, jib sheets and control lines.
Order by the 600' reel or by the foot
▪▪High strength
▪▪Low elongation
▪▪Excellent grip
▪▪Specific gravity of 0.98
▪▪Very high strength
▪▪Extra Low elongation
▪▪Easy handling
▪▪Fully spliceable
Rope / Mooring / Anchoring
Part#
Size
Colour
Tensile
Strength
NBR SPEC018B
1/8”
Blue
1,600 lbs
NBR SPEC018BK
1/8”
Black
1,600 lbs
NBR SPEC316BK
3/16”
Black
3,200 lbs
NBR SPEC014BK
1/4"
Black
6,500 lbs
Novabraid Nova Lite
Nova Lite is a double braid rope constructed of plaited multi
filament polypropylene cover and core. Novabraid’s unique
construction process provides for a stronger, lightweight line that is
easy to handle. With no water absorption, Nova Lite floats, making
it ideal for sheets on dinghies and small keel boats as well as man
overboard life saving and heaving lines.
Order by the 600' reel or by the foot
▪▪Light weight
▪▪Low stretch
▪▪UV resistant
▪▪Easy running
Size
Colour
Tensile
Strength
NBR LT316WB
3/16”
White/Blue
1,514 lbs
NBR LT316WG
3/16”
White/Green
1,514 lbs
NBR LT316WR
3/16”
White/Red
1,514 lbs
NBR LT316YR
3/16”
Yellow/Red
1,514 lbs
NBR LT014OT
1/4”
Orange/Teal
1,510 lbs
NBR LT014PT
1/4”
Purple/Teal
1,510 lbs
NBR LT014YR
1/4”
Yellow/Red
1,510 lbs
NBR LT516OT
5/16”
Orange/Teal
1,730 lbs
NBR LT516PT
5/16”
Purple/Teal
1,730 lbs
NBR LT516RT
5/16”
Red/Teal
1,730 lbs
NBR LT516TP
5/16”
Teal/Purple
1,730 lbs
NBR LT516WT
5/16”
White/Teal
1,730 lbs
NBR LT516YR
5/16”
Yellow/Red
1,730 lbs
NBR LT038OT
3/8”
Orange/Teal
3,220 lbs
NBR LT038TP
3/8”
Teal/Purple
3,220 lbs
NBR LT038W
3/8”
White
3,220 lbs
NBR LT038WB
3/8”
White/Blue
3,220 lbs
NBR LT038WR
3/8”
White/Red
3,220 lbs
NBR LT038YR
3/8”
Yellow/Red
3,220 lbs
NBR LT012YR
1/2”
Yellow/Red
4,100 lbs
Part #
Part#
Size
Colour
Tensile
Strength
NBR XLEZ038WBG
3/8"
White/Blue/Green
4,180 lbs
NBR XLEZ716WBG
7/16"
White/Blue/Green
6,025 lbs
NBR XLEZ012W
1/2"
White
8,500 lbs
Novabraid Dinghy Braid
Dinghy Braid is carefully constructed with a high tenacity polyester
parallel core with an 8 plait polyester cover. Both core and cover
are pre-stretched and heat set resulting in a strong, low stretch and
easy to handle line. Ideal for control lines on dinghies and small keel
boats. Colours are made of polyester and are available in red, green,
blue and white. A single green tracer distinguishes Novabraid Dinghy
Braid from the rest.
▪▪Order by the 600' reel or by the foot
▪▪Light weight
▪▪Low stretch
▪▪Easy handling
Size
Colour
Tensile
Strength
NBR DB532BK
5/32”
Black
850 lbs
NBR DB532R
5/32”
Red
850 lbs
NBR DB316BK
3/16”
Black
1,340 lbs
NBR DB316R
3/16”
Red
1,340 lbs
NBR DB014B
1/4”
Blue
1,800 lbs
NBR DB014R
1/4"
Red
1,800 lbs
Part#
Novabraid / Osborne / Panther
Novabraid Nova Gold
Osborne
NBR NG516
5/16”
3,400 lbs
NBR NG038
3/8”
5,000 lbs
NBR NG012
1/2”
8,000 lbs
NBR NG058
5/8”
14,800 lbs
Part No.
(Gauge X Length)
Straight:
OSE 509-9G-4"
9 x 4"
OSE 509-10G-33/4"
10 x 3-3/4"
OSE 509-11G-31/2"
11 x 3-1/2"
OSE 509-12G-31/4"
12 x 3-1/4"
OSE 509-13G-3"
Novabraid Shock Cord
Blue
110 lbs
250’
NBR S018BK-250’
1/8”
Black
110 lbs
250’
NBR S018G-250’
1/8”
Green
110 lbs
250’
NBR S018R-250’
1/8”
Red
110 lbs
250’
NBR S018W-250’
1/8”
White
110 lbs
250’
NBR S316B-250’
3/16”
Blue
134 lbs
250’
NBR S316BK-250’
3/16”
Black
134 lbs
250’
NBR S316G-250’
3/16”
Green
134 lbs
250’
NBR S316R-250’
3/16”
Red
134 lbs
250’
NBR S316W-250’
3/16”
White
134 lbs
250’
NBR S014B-250’
1/4”
Blue
226 lbs
250’
NBR S014BK-250’
1/4”
Black
226 lbs
250’
NBR S014G-250’
1/4”
Green
226 lbs
250’
NBR S014R-250’
1/4”
Red
226 lbs
250’
NBR S014W-250’
1/4”
White
226 lbs
250’
NBR S516B-250’
5/16”
Blue
287 lbs
250’
NBR S516BK-250’
5/16”
Black
287 lbs
250’
NBR S516W-250’
5/16”
White
287 lbs
250’
NBR S038BK
3/8”
Black
Length
250'
15 x 2-1/2"
OSE 509-16G-23/8"
16 x 2-3/8"
OSE 509-17G-21/4"
17 x 2-1/4"
Bent:
OSE 508-9G-6"
9 x 6"
OSE 508-10G-5"
10 x 5"
Osborne Sail Palms
Fine quality rawhide palms of English
manufacture. The iron thimble is hide
bound, as are both joints, riveted.
OSE 265-L
OSE 265-R
Left hand
Right hand
Panther
Panther Rope Cutting Gun
▪▪120V, 150W, 1.5 amp
▪▪Makes quick clean cuts in synthetic
ropes, lines, and strapping
PAN 75-7060BUnit
PAN 75-7061
Replacement blade
Rope / Mooring / Anchoring
1/8”
OSE 509-15G-21/2"
W
Colour
NBR S018B-250’
14 x 2-3/4"
E
Size
Tensile
Strength
13 x 13"
OSE 509-14G-23/4"
N
Unlike hardware variety shock cord, Nova Shock is braided
with colour fast solution dyed polyester cover yarns for superior
protection against abrasion and ultra-violet light. The core is
comprised of parallel strands of round latex rubber, yielding 85%
to 100% elongation and recovery even after exposure to freezing
conditions.
▪▪Abrasion resistant
▪▪UV stabilized cover
▪▪Continuous length reels
Part #
Manufactured in England to Osbornes' exacting standards.
Nickel-plated fine steel with triangular point.
W
Size
Tensile
Strength
Osborne Sailmaker's Needles
E
N
A premium double braided nylon rope designed for general marine
use where controlled elongation, high strength and abrasion
resistance are required. Highly resistant to mildew, rot and most
chemicals. Easy to splice.
▪▪Order by the 600' reel or by the foot
Part #
213
ROCK SOLID.
215
Rocna
N
NEW for 2015
From ROCNA
E
W
The Vulcan Anchor
The best multi-purpose anchor that sets in all ocean floors for
vessels of all sizes, from small runabouts to superyachts
▪▪Instant Set: The roll-bar ensures that it always lands on the
ideal angle for penetration, plus reinforces the blade for massive
strength
▪▪Setting skids elevate the heel and correctly direct the tip, for
reliable setting in soft seabeds
▪▪Self-launching: The shank is high tensile steel, and designed so
the anchor self-launches
▪▪Rock solid holding power: Of all anchor types, a concave blade
gives the greatest resistance, and through clever design Rocna
provides the largest blade area possible; the result - massive
holding power
▪▪Resistant to wind and tide shifts: The sharp chisel tip combines
with a very high weight on tip (average of 33%), which ensures
an instant reliable set with every use.
▪▪No lead in the tip and no dragging is also environmentally
friendly
Dedicated attachment points for:
- Buoyed retrieval line
- Tandem anchor
- Securing to the bow
RCA 4KG GALV
RCA 6KG GALV
RCA 10KG GALV
RCA 15KG GALV
RCA 20KG GALV
RCA 25KG GALV
RCA 33KG GALV
RCA 40KG GALV
VCA VLC4GS
VCA VLC6GS
VCA VLC9GS
VCA VLC12GS
VCA VLC15GS
VCA VLC20GS
VCA VLC25GS
VCA VLC33GS
Also available in stainless steel
SIZING GUIDELINE
Also available in stainless steel
To choose the correctly sized Rocna, match your vessel’s length with the most appropriate displacement range,
also bearing in mind conditions of intended use (if in doubt, give preference to the larger anchor model).
For multi-hulls: use the chart as instructed, then select the model one size larger.
Vulcan or Rocna Models
Unlike other
manufacturers, our sizing
recommendations are
intended to provide an
anchor adequate for use
in most all conditions. We
base our calculations on
50 knots wind, associated
surge, and poor holding
bottoms.
This chart is a guidline only, so if
you require further information,
please contact your local distributor
or visit www.rocna.com.
Vessel Length
Our sizing is conservative.
6
9
Vulcan Only
10
Rocna Only
12
Vulcan Only
≤19,800lb
15
20
25
33
40
ROCNA Model
4
4m - 13’
≤4,400 lb
5m - 16’
≤2,200lb
≤11,000lb
6m - 20’
≤1,100lb
≤8,8000lb
≤15,400lb
7m - 23’
≤4,400lb
≤13,200lb
≤15,400lb
8m - 26’
≤2,200lb
≤11,000lb
≤13,200lb
≤17,600lb
≤22,000lb
9m - 30’
≤8,800lb
≤11,000lb
≤15,400lb
≤10,800lb
≤35,200lb
10m - 33’
≤7,200lb
≤8,800lb
≤13,200lb
≤17,200lb
≤30,800lb
≤55,000lb
≤7,200lb
≤11,000lb
≤15,400lb
≤26,400lb
≤44,000lb
≤56,000lb
≤11,000lb
≤13,200lb
≤22,000lb
≤33,000lb
≤55,000lb
≤15,400lb
≤26,400lb
≤44,000lb
≤88,000lb
≤19,800lb
≤33,000lb
≤72,000lb
18m - 59’
≤26,400lb
≤55,000lb
20m - 66’
≤22,000lb
≤39,600lb
11m - 36’
12m - 39’
14m - 46’
16m - 52’
22m - 72’
≤26,400lb
Anchor Weight
9lb/4kg
13lb/6kg
22lb/10kg
33lb/15kg
44lb/20kg
55lb/25kg
73lb/33kg
88lb/40kg
Recommended Chain
1/4”-6mm
1/4”-6mm
1/4”-7mm
5/16”-8mm
5/16”-9mm
3/8”-10mm
3/8”-10mm
7/16”-11mm
Blade Surface Area*
71in2
91in2
123in2
160in2
177in2
219in2
263in2
301in2
* Weights and areas may vary slightly
Vessel displacement units: 1 t (metric tonne) = 1,000 kg = 2,205 lb
Rope / Mooring / Anchoring
The Vulcan is carefully designed to offer the greatest possible
compatibility across a wide range of vessel bow configurations,
particularly powerboats with a bow pulpit. The Vulcan capitalizes
on finely tuned design elements and proven performance advantages
for an extremely quick and reliable set across a range of seabeds
combined with rock solid holding power.
▪▪Features a unique combination of shank and fluke geometry including an innovative roll-palm at the rear of the fluke - which
self-rights the anchor on the seabed without the use of a rollbar. This is assisted by the V-bulb which extends fluke ballast
downward to gain maximum leverage and efficiency
▪▪The omission of a roll-bar along with a carefully designed shank
profile ensures a snug fit on the bows of a widely expanded
range of vessels. Platforms, bowsprits, prods, stays, and other
protrusions are easily cleared with no hassle or inconvenience
▪▪The Vulcan’s shank shape encourages self-launching and selfstowing upon retrieval on the majority of bow rollers, with a
liquid smooth action, ensuring ease of use for all operators
▪▪In addition to the use of high tensile steel, shank strength is
optimized by a unique I+V profile shank design, granting
improved resistance to bending courtesy of a computer optimized
I-beam geometry. This visually elegant innovation also improves
setting performance, with the lower V edge cutting into the
seabed and minimizing resistance to a
deep and secure burial
The Ronca Original Anchor
Samson
NEW!
WarpSpeed II
If you liked it before,
YOU’LL LOVE IT NOW
®
Introducing the newest
generation of our most
popular high-performance
running rigging. You’re in for
a treat when you experience
the difference WarpSpeed® II
can make on the course
or on a cruise.
FEATURES & BENEFITS:
> High strength and extremely low stretch
> Very low creep—provides better stability
under static load
> Lightweight
> Excellent abrasion resistance
> Strippable cover with color-coded cores
SamsonRope.com
GET YOURS TODAY AT
Distributor Company Name
12345 Main Street #A, Cityname, ST 98999
Dyneema® is a registered trademark of
Royal DSM N.V. Dyneema® is DSM’s
high-performance polyethylene product.
www.DistributorWebAddress.com
1.800.555.1212 [email protected]
Samson
217
24 Strand Cover A distinct design feature to the Colour Match 24 program is the creation of the 24 strand
braided covers with tension set plying of each 3-ends per strand. This design combination out-performs
traditional 16, 20 or 32 strand covers for overall durability, flexibility and grip on winches and stoppers.
Colour Match 24 Samson's exclusive Colour-Match 24 is a clever system for maintaining the colour coding of a
line even when the cover has been stripped off. Now you can finally strip the covers off your halyards and still
easily distinguish one line from the other without any special gadgets or hardware because the core is urethane
coated the same as the tracer colour in the cover.
Colour Code
BL = Blue
GR = Green
BK = Black
RD = Red
BE = Beige
WH = White
Samson Ultra-Lite
A lightweight, floating double braid with a modest strength/weight and price profile. 24 strand MFP cover and
blended core of MFP and SK-60 Dyneema. Ultra-Lite is great for light wind sheets.
Black, red & green cover with yellow tracer.
Tracer
Part #
BK
RD
Strength
Weight/100'
•
•
•
2,200 lbs
1.9 lbs
SAM 441 (COLOUR) 5/16"
•
•
•
2,900 lbs
2.5 lbs
SAM 441 (COLOUR) 3/8"
•
•
•
4,400 lbs
3.2 lbs
Ordering example: If you want to order 50' of 1/4" Black, you would order 50 x SAM 441BK14
Elongation
@10%B.S.=0.65%
@20%B.S.=1.00%
@30%B.S.=1.29%
Samson Warp Speed II
Part #
GR
BK
RD
Strength
Weight/100'
•
•
•
•
5,100 lbs
1.6 lbs
SAM 440 (COLOUR) 5/16"
•
•
•
•
6,200 lbs
3 lbs
SAM 440 (COLOUR) 3/8"
•
•
•
•
9,800 lbs
3.8 lbs
SAM 440 (COLOUR) 7/16"
•
14,000 lbs
5.8 lbs
SAM 440 (COLOUR) 1/2"
•
21,000 lbs
8.2 lbs
Elongation
@10%B.S.=0.44%
@20%B.S.=0.62%
@30%B.S.=0.79%
Elastic elongation for rope
stabilized from 200D2
Ordering example: If you want to order 50' of 1/4" Blue, you would order 50 x SAM 440BL14
Samson AmSteel Blue - SK-75
AmSteel-Blue is a 12-Strand braided rope utilizing Parallay design with our proprietary blue
Samthane coating with Dyneema SK-75 fibre. This rope yields the maximum in strength-toweight ratio and is stronger than wire rope constructions - yet it floats. Superior flex, fatigue
and wear resistance.
Colour
Strength
Weight/100'
SAM 872-BL-1/8"
Part #
Blue
2,500 lbs
.5 lbs
SAM 872-BL-3/16"
SAM 872-BK-3/16"
Blue
Black
5,400 lbs
1.0 lbs
SAM 872-BL-1/4"
Blue
6,800 lbs
1.6 lbs
SAM 872-BL-5/16"
Blue
13,700 lbs
2.7 lbs
SAM 872-BL-3/8"
Blue
19,600 lbs
3.6 lbs
Ordering example: If you want to order 50' of 1/4" Blue, you would order 50 x SAM 872BL14
Elongation
@10%B.S.=0.46%
@20%B.S.=0.70%
@30%B.S.=0.96%
Elastic elongation for rope
stabilized from 200D2
W
BL
SAM 440 (COLOUR) 1/4"
E
Tracer & Core Colours
N
WarpSpeed® II is a high strength, low stretch, and extremely lightweight double braid that resists abrasion and is very easy to handle.
It has a strength member made with Dyneema® SK78 fiber for enhanced creep performance. The upgraded cover design is a colorcoded, flexible, 24-strand polyester that provides good handling, excellent performance in stoppers and clutches, and enhanced
abrasion resistance. The Samthane-coated, color-matched core accomodates cover stripping when needed for greater weight savings.
Rope / Mooring / Anchoring
GR
SAM 441 (COLOUR) 1/4"
218
Samson
Samson MLX
Designed for the club racer, but also suitable for the performance-oriented cruiser, MLX is a new double braid
construction that incorporates a first-of-its-kind core with a polyester cover. The core is a blend of a new and
exclusive fiber, Innegra-S, a high modulus polypropylene (HMPP), and Dyneema, a high modulus polyethylene
(HMPE). Innegra-S is available to the rope industry only through Samson, and provides a bridge between the
performance characteristics and price tags of traditional synthetic fibers, such as nylon and polyester, and highperformance synthetic fibers such as Technora, Dyneema, and Vectran. MLX is a lightweight core-dependent line
that has excellent strength and low stretch. The core is Samthane coated to match the color of the cover, making
the line strippable for greater weight savings.
Cover w/Tracer Colours
Part #
BK
SAM 434 (COLOUR) 3/16"
•
SAM 434 (COLOUR) 1/4"
•
SAM 434 (COLOUR) 5/16"
BL
GR
RD
Strength
Weight/100'
•
•
WH
1,800 lbs
1.3 lbs
•
•
3,800 lbs
1.6 lbs
•
•
•
•
4,500 lbs
3.0 lbs
SAM 434 (COLOUR) 3/8"
•
•
•
•
7,200 lbs
3.8 lbs
SAM 434 (COLOUR) 7/16"
•
•
9,500 lbs
5.8 lbs
Elongation
@10%B.S.=0.7%
@20%B.S.=1.1%
@30%B.S.=1.4%
Elastic elongation for rope
stabilized from 200D2
Ordering example: If you want to order 50' of 5/16" Blue. You would order 50 x SAM 434BL5/16
Rope / Mooring / Anchoring
Samson XLS Extra
Created for performance-oriented cruisers and casual racers wanting higher strength and lighter weight than that achieved with a polyester
double braid. Like our competition grade running rigging, XLS Extra offers the smooth flexibility of a 24 strand braided polyester cover
with a braided core made from a blend of MFP and SK-60 Dyneema. The blended core offers the strength and light weight of Dyneema
fibre for performance without the high price of a 100% Dyneema core.
Dark Blue Cover W/Tracer Colours
BL
BE
RD
Strength
Weight/100'
SAM 442 (COLOUR) 5/16"
Part #
•
•
•
3,500 lbs
3.2 lbs
SAM 442 (COLOUR) 3/8"
•
•
•
4,600 lbs
4.0 lbs
6,100 lbs
5.7 lbs
8,700 lbs
7.7 lbs
SAM 442 (COLOUR) 7/16"
•
SAM 442 (COLOUR) 1/2"
•
•
•
Ordering example: If you want to order 50' of 5/16" Blue. You would order 50 x SAM 442BL516
Elongation
@10%B.S.=0.65%
@20%B.S.=1.00%
@30%B.S.=1.29%
Elastic elongation for
rope
stabilized from 200D2
Samson Pro-Set 3-Strand Nylon
Samson Lash-It
Pro-Set Nylon is a premium 3-strand rope. It is
manufactured to minimize shrinkage snagging
and hockling and to maximize strength,
durability and flexibility. This rope is an
excellent choice for chain/rope windlasses.
▪▪Sold by the foot
Made from Dyneema fibre, this twine yields the highest strength,
lightest weight, lowest stretch and longest wear life available.
The proprietary urethane coating Samthane adds to the
twine’s wear life, ensures the knot-holding capability of
the twine, and gives the twine its distinctive gray colour.
▪▪Diameter: 1.75 mm
▪▪Average strength: 400 lbs
▪▪Comes in 180' tubes
Dia
Strength
SAM 170-1/2"
Part #
1/2"
6,300 lbs
SAM 170-5/8"
5/8"
10,000 lbs
Samson Nylon Starter Cord
A 100% nylon cord with a white braided cover over
a twisted core to provide abrasion resistance, body
and flexibility.
Part #
Dia.
Strength
SAM 580-#3X1000'
3/32"
500 lbs
SAM 580-#4X1000'
1/8"
650 lbs
SAM 580-#5X1000'
5/32"
975 lbs
SAM 811-1.75MM180'
Samson / Sail Twine
Sail Twine
The Samson splicing kit contains five tubular
fids for splicing lines of 1/4" (6mm), 5/16"
(8mm), 3/8" (9mm), 7/16" (11mm), 1/2"
(12mm), along with a pusher and complete
instructions for Samson standard eye splice in a
convenient plastic tube.
▪▪Pre-waxed, polyester sail twine for whipping,
stitching and repairing
▪▪100% continuous filament
▪▪Comes with 15 gauge x 2-1/2" sailmaker's needle
▪▪Put up in 4 oz roll
SAI 3MBB-4
SAI 7PB-4
W
E
SAM 999-007
N
Samson Splicing Kit
219
40 lb test - 170 yd
100 lb test -110 yd
Samson Splicing Manual
Samson ropes are classified as either Class I or Class II ropes,
depending on the fibers used. Splicing procedures are different for
each class. Always make certain you use the
correct splice for the rope you’re working
with. A complete guide for correct splicing.
▪▪169 Pages
▪▪Colour rope identification chart
▪▪Colour rope retirement guide
SAM 996-006
Rope / Mooring / Anchoring
Titan
Exceeds Industry specifications
Engineered in Canada
Exceeds
Industry Specifications
Proof Tested
W
E
N
Engineered in Canada
Titan Galvanized Shackles
Proof Tested
▪▪Hot dip galvanized coating on both the shackle & pin
▪▪Proof tested & load rated
▪▪Working load limit, size and Titan logo stamped on every shackle
Working load limit
Breaking load limit
Description Size
Bail
Pin
Lb - Kg
Lb - Kg
TIT 10319050
1/4” Screw pin HDG
1/4” (6mm)
5/16" (8mm)
1,100-500
6,600-3,000
TIT 10319051
5/16” Screw pin HDG
5/16" (8mm)
3/8” (10mm)
1,650-750
9,900-4,500
TIT 10319052
3/8” Screw pin HDG
3/8” (10mm)
7/16" (11mm)
2,200-1,000
13,200-6,000
7/16" (11mm)
1/2" (13mm)
3,300-1,500
19,800-9,000
Anchor
Part #
TITANMARINEPRODUCTS.COM
7/16” Screw pin HDG
TIT 10319053
CANADA METAL (PACIFIC) LTD
Chain
Rope / Mooring / Anchoring
220
Size
TIT 10319054
1/2” Screw pin HDG
1/2" (13mm)
5/16" (8mm)
4,400-2,000
26,400-12,000
TIT 10319062
1/4” Screw pin HDG
1/4" (6mm)
5/16" (8mm)
1,100-500
6,600-3,000
TIT 10319063
5/16” Screw pin HDG
5/16" (8mm)
3/8” (10mm)
1,650-750
9,900-4,500
TIT 10319064
3/8” Screw pin HDG
3/8” (10mm)
7/16" (11mm)
2,200-1,000
13,200-6,000
TIT 10319065
7/16” Screw pin HDG
7/16" (11mm)
1/2" (13mm)
3,300-1,500
19,800-9,000
TIT 10319066
1/2”Screw pin HDG
1/2" (13mm)
5/8" (16mm)
4,400-2,000
26,400-12,000
221
Transat
Transat ‘Bruce’ Style Anchors
An excellent quality, highly polished stainless steel or galvanized steel ‘Bruce’ style anchor.
Stainless
TMS Q91002S
Galvanized
Weight
Kg
A
B
C
D
-
2
13.5
5.5
7.5
8.25
TMS Q91005S
TMS Q91105G
5
18.5
9
12.5
11
TMS Q91007S
TMS Q91107G
7.5
20
10
14.5
11.5
TMS Q91010S
TMS Q91110G
10
23
11.5
15.5
12.5
TMS Q91113G
13
22.5
11
15.5
12.5
TMS Q91015S
TMS Q91115G
15
26
14.5
17
14.5
TMS Q91020S
TMS Q91120G
20
28
15.5
19
16
TMS Q91030S
TMS Q91130G
30
30
16
22
17
-
'Bruce' Style Anchor Selection Guide
Anchor (Working)
Boat length
Beam Sail
Beam Power
Rode Dia.
Chain Dia.
kg~lb
kg~lb
m~ft
m~ft
m~ft
mm~ins
m~ft
Chain Length
m~ft
2~4.4
2~4.4
5~16
2.0~6.6
2.2~7.2
9~0.31
5~0.20
2.0~6.6
5~11
2~4.4
7~23
2.7~8.9
2.9~9.5
10~0.39
6~0.24
2.6~8.5
7.5~16.5
5~11
9~29
3.1~10.2
3.4~11.2
12~0.47
7~0.28
3.0~9.8
10~22
5~11
10~33
3.4~11.2
3.7~12.1
14~0.55
8~0.31
3.2~10.5
15~33
7.5~16.5
12~39
3.8~12.5
4.2~13.8
16~0.63
9~0.35
3.7~12.1
20~44
10~22
14~46
4.2~13.8
4.6~15.1
18~0.71
10~0.39
4.0~13.1
30~66
15~33
18~59
4.9~16.1
5.4~17.7
22~0.87
12~0.47
4.5~14.8
50~110
20~44
25~82
5.8~19.0
6.7~22.0
26~1.02
16~0.63
5.0~16.4
The anchor size given above assumes winds up to 60 mph, some protection from seas, fair holding ground, and operation at scope adequate
to develop full holding power. Where a vessel has unusually large superstructure or heavy displacement, use a size heavier. Vessels built to
classification society requirements have anchor weights stipulated by the societies. For optimum performance a close fitting shackle should
be used, otherwise the shackle should be centralised by means of galvanized washers. The mooring lines should have sufficient elasticity to
minimise shock loading on the anchor and on the boat fittings due to wind and wave surges. Chain of sufficient length to provide an adequate
catenary, or nylon rope of sufficient length to provide an equivalent effect under load is recommended. Where nylon rope is used, a short
length of chain should be included at anchor end to resist chafing of the sea bed as recommended in table above.
Transat Fender Hanger
Solid one piece plastic construction. For rope
sizes to up to 1/2” and rails up to 1”.
▪▪Finger tip adjusting
▪▪No moving parts - nothing to break
▪▪Durable - high impact UV protected
▪▪Secure - will not slide or scratch
▪▪Flexible - 1/4” to 1/2” rope of any material
▪▪Value - no more lost fenders
▪▪Versatile - Use as a tarp/load tiedown
TSM FH01
Rope / Mooring / Anchoring
Anchor (Storm)
www.railblaza.com
PO Box 434, Silverdale 0950, Auckland, NZ
6 Tavern Rd, Silverdale 0932, Auckland, NZ
[email protected]
+64 9 426 1475 Fax: +64 9 426 1477
www.facebook.com/RAILBLAZA
For competitions, tutorials, pictures and event news!
Installation &
Demo Videos!
www.youtube.com/railblaza
DIGITERATI
www.railblaza.co
Some StarPort accessories
come in both black and
white. For up-to-date option
dimensions and specifics,
check out our website!
C-Tug Trolley
The New Zealand made C-TUG is the best, most
versatile and durable kayak trolley on the market. It
carries up to 120kg (300lbs), dismantles in under 20
seconds to fit into a kayak hatch and won’t corrode.
Part no: 50-0001-71
Packaged box size: 580mm x 270mm x 200mm
(23” x 10.5” x 8”) 4.3kg (10lbs)
RAILBLAZA C-TUG landscape A4.indd 1
4/02/15 12:10
RAILBLAZA reserve the right to change specifications, product descriptions and model applications at any time without notice and without further obligation. We assume no liability for any errors in listings, specifications, part numbers or model application
Postal:
Factory:
Email:
Ph:
Web:
® RAILBLAZA LTD
Kiwi Wheels
Puncture free with hi-grip rubber tread. If you have
an old C-TUG with pneumatic wheels and want to
upgrade, all you do is clip off your old wheels, and
clip on the new ones, easy as!!
Part no: 50-0002-71
(Supplied as a pair)
Dimensions: Dia. 260mm (10”), Width. 90mm (3.5”)
WWW.C-TUG.COM
Made in New Zealand
• Reinforced composite material
• Tool-free assembly
• Dismantles in under 20 seconds
• Fits inside kayak hatch
• Thermo-bonded elastomeric hull pads
• Stainless steel reinforced axles
• Puncture-free wheels with hi-grip rubber tread
• 2.4m (7.5’) strap with cam-lock buckle
• Adjustable kick-stand
• Light weight 4.3 kg (10lbs) and easy to handle
• 120kg (300lbs) static loading
The C-TUG kayak trolley is designed and manufactured in Napier, New Zealand. Unlike any other
trolley in the paddle sport arena today, C-TUG continues to amaze sport enthusiasts with its
rugged appeal, incredible strength and satisfying good looks.
The Ultimate Kayak & Canoe Trolley
Boats / Motors
223
C-TUG
227
FORESPAR Davits
227
LEHR Propane Outboards
225
ODYSSEY Inflatables
228
THE
WORLDS FIRST
PROPANE POWERED
OUTBOARD ENGINES
Boats / Motors
224
LP2.5
LP5.0
LP9.9
Twist N’ Go 1lb
disposable fuel bottle
LP15
www.golehr.com
Remote auxiliary tank
for longer range
225
LEHR
LEHR Propane Powered Outboard Motors
▪▪World’s first propane powered outboard marine engine
▪▪Great for sailboats, dinghies, tenders, fishing boats and other small watercraft
▪▪Powerful 4-stroke engine uses 110 octane fuel but is eco-friendly and
produces zero evaporative emissions
▪▪Runs on either a 16.4 oz. portable camping bottle or refillable standard tanks
▪▪Easy, no choke start with no priming and no carburetor gum up
▪▪No winterizing
▪▪3-year limited manufacturer’s warranty
Specs
LP5.0
LP9.9
LP15
4-stroke OHV
4-stroke OHV
4-stroke SOHV
4-stroke SOHV
2.5
5
9.9
15
Displacement
4.39 cu in
6.83 cu in
12.94 cu in
19.7 cu in
Bore x Stroke
2.12" x 1.37"
2.32" x 1.61"
2.32" x 1.61"
2.32" x 2.32"
1
1
2
2
4000 - 4500
4000 - 4500
4000 - 5500
4500 - 5500
Manual
Manual
Manual or Electric
Manual or Electric
Wet Sump
Wet Sump
Wet Sump/
Pressure Lubricated
Wet Sump/
Pressure
Lubricated
Controls
Tiller Handle
Tiller Handle
Tiller Handle or
Remote
Tiller Handle or
Remote
Exhaust
Above Propeller
Above
Propeller
Through Propeller
Through Propeller
F-N
F-N-R
F-N-R
F-N-R
37.4 lbs
48.4 lbs
88 lbs
110 lbs
Engine Type
Horsepower Rating
Cylinders
RPM Range
Starting
Lubrication
Gear Shift
Weight
LEH LP2.5S
2.5 & 5 hp only
LEH LP5.0S
LEH LP9.9S
LEH LP15S
Short Shaft (15")
LEH LP5.0L
LEH LP9.9L
LEH LP15L
Long Shaft (20")
Electric Start
LEH LP9.9ES
LEH LP15ES
Short Shaft (15")
Electric Start
LEH LP9.9EL
LEH LP15EL
Long Shaft (20")
Remote Electric Start
LEH LP9.9ERS
LEH LP15ERS
Short Shaft (15")
Remote Electric Start
LEH LP9.9ERL
LEH LP15ERL
Long Shaft (20")
Remote Electric Start
Internal Battery
LEH LP9.9ES-IB
LEH LP15ES-IB
Short Shaft (15")
Remote Electric Start
Internal Battery
LEH LP9.9EL-IB
LEH LP15EL-IB
Long Shaft (20")
Manual Start
Manual Start
25 hp Available Spring 2015
LEHR Propane Outboards are sold through
a network of Stocking Dealers
Ask about becoming a Dealer
Boats / Motors
LP2.5
226
LEHR
Boats / Motors
LEHR Accessories
LEH LPH4
LEH LPH10
LEH LPHLD10
LEH LPCP10-1
LEH LPTP10
Propane connect hose 4'
Propane connect hose 10'
Liquid propane connect hose 10'
Remote propane connector plug
Rubber propane tank plug
LEH LPK10
LEH LPCP10
LEH LPTP10
LEH OB 072.3-051
LEH OB212.3-069
LEH LPW2.5
LEH LPW5.0
LEH LPW9.9
Safety stop tether
Brass plug propane connector
Rubber propane tank plug
Zinc anode, 2.5/5.0
Zinc anode, 9.9
Water pump impeller kit 2.5HP
Water pump impeller kit 5.0HP
Water pump impeller kit 9.9HP
LEH LPPH5.0
LEH LPPH9.9
LP2.5-LP5.0 propeller hardware kit
LP9.9 propeller hardware kit
LEH LPP2.5
LEH LPP2.5A5
LP2.5 prop 7.25 x 6, 3 blade, w/cotter pin
LP2.5-LP5.0 prop 7.25 x 5, 3 blade
LEH LPP5.0
LEH LPP5.0A7
LP5 prop 7.5 x 7, 3 blade, w/cotter pin
LP5 prop, 7.25 x 7, 3 blade
LEH LPP9.9B7
LEH LPP9.9B8
LEH LPP9.9B9
LP9.9 prop, 8.5 x 7, 3 blade
LP9.9 prop, 8.5 x 8, 3 blade
LP9.9 prop, 8.5 x 9, 3 blade
LEH LPP15C10
LEH LPP15C11
LEH LPP15C410
LEH LPP15C411
LEH LPP15C47
LEH LPP15C48
LEH LPP15C49
LEH LPP15C7
LEH LPP15C8
LEH LPP15C9
LP15 prop, 9.25 x 10, 3 blade
LP15 prop, 9.25 x 11, 3 blade
LP15 prop, 9.25 x 10, 4 blade
LP15 prop, 9.25 x 11, 4 blade
LP15 prop, 9.25 x 7, 4 blade
LP15 prop, 9.25 x 8, 4 blade
LP15 prop, 9.25 x 9, 4 blade
LP15 prop, 9.25 x 7, 3 blade
LP15 prop, 9.25 x 8, 3 blade
LP15 prop, 9.25 x 9, 3 blade
LEH LPP15HT45
LEH LPP15HT47
LP15 high thrust prop, 10 x 5, 4 blade
LP15 high thrust prop, 10 x 7, 4 blade
LEH COWLING CLIP RETRO
5 cowl clip replacement kit
LEH DEALER MKTG.KITS
Dealer marketing kits
LEH SAWHORSE ENGINE STAND 3-engine stand
LEHR
Side Mount Remote Shifter
▪▪Remote control with 16' harness
▪▪Required for 9.9ERS, LP9.9ERL, LP15ERS and LP15ERL
LEH LPRC16
LEHR Fibreglass Propane Tanks
▪▪Visible gas level
▪▪Non-corrosive 3 layer composite
▪▪Ergonomic easy carry handles
▪▪36% lighter than steel
▪▪DOT approved
▪▪Pre-purged cyclinder
Net
Propane
Dia
O.L.
Draw Type
LEH LPT11
11 lbs
12"
15"
Vapour
LEH LPT17
17 lbs
12"
18.1"
Vapour
LEH LPT31LD
31 lbs
12"
28.3"
Liquid
Part #
► Note
Liquid draw propane tanks use a liquid draw valve and
are designed to be mounted horizontally.
► Also See
Aluminum Propane Tanks pg 124
► Also See
Propane Tank Holders pg 175
C-Tug / Forespar
W
E
▪▪Most versatile and durable kayak trolley on the market
▪▪Lightweight and easy-to-handle
▪▪Reinforced composite material
▪▪Thermo-bonded elastomeric hull pads
▪▪Puncture-free wheels with hi-grip rubber tread
▪▪Stainless steel reinforced axles
▪▪7-1/2’ strap with cam-lock buckle
▪▪Adjustable kick-stand
▪▪Tool-free assembly
▪▪Dismantles in under 20 seconds; fits inside kayak hatch
▪▪Carries up to 300 lbs
▪▪Weight: 9 lbs
▪▪Made in New Zealand
▪▪5 year warranty
N
C-Tug Kayak Trolley
227
CTG 50-0001-71Kayak/trolley
Parts:
CTG 50-0002-71
CTG CT-1002
CTG CT-1003
CTG CT-1004
CTG CT-1018
Puncture free wheels (pr)
Cross beam
Kick stand
Hull pad
Strap kit
Forespar
W
E
N
Fits most popular inflatable dinghies, both hard and soft bottomed. Mount it
directly to your swim platform, where it holds the dinghy securely and tightly
against the swim step, making it easy to get in and out, or to transfer equipment.
The dinghy then rotates out of the water for easy storage and no towing.
▪▪Easy grip design for simple one-hand operation.
▪▪Convenient integrated handles in the mounting pads help entering, exiting,
and maneuvering.
▪▪Provides safer entry to and exit from your inflatable dinghy.
▪▪Fully compatible with other snap davit systems.
▪▪Solid stainless and UV resistant composite construction
▪▪No loose parts to drop in the water
▪▪Includes two glue-on dinghy pads with SS yokes, two snap davit heads for
yacht, and all hardware, fasteners and instructions. Adhesive kit included
▪▪For inflatable dinghies up to 175 lbs total weight (79 kg) and up to 11 feet (3.3 m) in length
FRS 153470
Forespar QUIK Davit Fast Kit
With the Fast Kit installed, this low profile stainless
steel bracket/adapter system makes it easy to move
around your swim platform and allows quick, easy
removal and storage of the davit heads.
▪▪Fast kit shoes (2)
▪▪Fast pins w/ wire lanyards (2)
▪▪Fasteners (8 sets)
▪▪Fast pin water barriers (2)
FRS 153477
Boats / Motors
Forespar QUIK Davit Kit for Inflatable Dinghies
228
Odyssey
Walker Bay Odyssey AIR FLOOR Series
The new Odyssey line is perfect for those looking for
simplicity and performance in a stowable tender. Light
and compact, the Odyssey series is the ultimate “boat in a
bag”. All Odyssey models roll up quickly and easily into a
storage/carry bag (included), making it easy to get on the
water faster or store it when not in use.
Inflatable Floor
High Pressure 11psi Inflatable Floor:
Constructed from two layers of durable
copolymer polyester fabric, joined by
thousands of dropstitch fibres and inflated to
form a lightweight rigid deck, the Air Floor
Series offers performance, combined with
effortless setup and takedown.
Features Overview
Boats / Motors
▪▪Collapsible and light RTM molded fibreglass transom
▪▪Modern tapered tube design leaves more room in the bow and
space for a fuel tank
▪▪Larger diameter tubes for more buoyancy and carrying capacity
▪▪“Easy Lift” transom lip carrying point and bow lifting handle
▪▪Built in transom Trim Tabs for more lift and earlier planing
▪▪German made Heytex PVC
▪▪Light weight rub rail
▪▪Two piece light weight oars
▪▪RTM molded fiberglass seat
▪▪One-way drain plug
▪▪2 rear carrying handles, 4 webbing handles & 1 bow handle
▪▪4 davit lifting points, 2 towing D-rings
▪▪High pressure hand pump
▪▪Repair kit
▪▪Easy to stow storage/ carrying bag
▪▪Fuel tank tie-down straps in bow
▪▪Short shaft recommended
ODY 5001080001
ODY 5001080002
ODY 5001080003
7'11" 240AF
8'10" 270AF
10'2" 310AF
ODYSSEY/AIRIS Hand Pump
ODY 1000330001
Superior Fabric
Heytex PVC – Walker Bay uses the best
name brand PVC in the industry, German
made Heytex PVC.
LOA
310 AF PVC
270 AF PVC
240 AF PVC
10’2” / 310 cm
8’10” / 270 cm
7’11” / 240 cm
Beam
61” / 154 cm
61” / 154 cm
60” / 153 cm
Tube Diameter
16.5” / 42 cm
16.5” / 42 cm
16.5” / 42 cm
Air Chambers
2+2
2+2
2+1
Weight
67 lbs / 30 kg
63 lbs / 29 kg
57 lbs / 26 kg
Max Passengers
4
3
3
Max Payload
1430 lbs / 650 kg
1188 lbs / 540 kg
924 lbs / 420 kg
Recommended HP
8
6
5
Max HP
10
8
6
Sausage Keel
Yes
Yes
No
Giftware
229
NAUTICALIA
230
L’il SUCKER
245
230
Nauticalia
Nauticalia Yachting Cap
Nauticalia Yachting Caps
These caps are made from strong, 100% cotton twill material, with
a sweat-resistant hem and reinforcing sewn around the inside.
The brims are plastic (not cardboard), and covered in soft fawncoloured suedette on top with navy covered twill beneath (to reduce
glare on the eyes). The size-adjusting strap has a metal buckle,
and metal sleeve for tucking away the end neatly. Each is heavily
embroidered with a crew position in cotton thread.
Giftware
NAT 6203Captain
NAT 6204Skipper
NAT 6205Crew
NAT 6206
First Mate
NAT 6208
Cabin Boy
NAT 6225
Ancient Mariner
NAT 6226
Dangerous Cargo
NAT 6227
This Way Up
NAT 6228Wreck
NAT 6229
Skull & Cross Bones
NAT 6223
Knackered Sailor
NAT 6235
Nobody’s Perfect
NAT 6236
Old Sea Dog
NAT 6238
Captains Word
NAT 6239
Thinking Cap
NAT 6270
Drunken Sailor
NAT 6271
Buoy Racer
NAT 6272
Old Salt
NAT 6273
Bottoms Up
NAT 6274
Galley Slave
NAT 6275
I’d Rather Be
Nauticalia Woolen Breton Style Caps
This is the peaked boatman’s cap that everyone copies, but only
the French get right. The original Breton 70% navy wool and
unmatched anywhere. Blue or Black. Sizes (measure around your
head just above the eyebrows and ears).
NAT 6254/56
NAT 6254/57
NAT 6254/58
NAT 6254/59
NAT 6254/60
NAT 6255/56
NAT 6255/57
NAT 6255/58
NAT 6255/59
NAT 6255/60
Navy Size 56
Navy Size 57
Navy Size 58
Navy Size 59
Navy Size 60
Black Size 56
Black Size 57
Black Size 58
Black Size 59
Black Size 60
Nauticalia Captains Hats
For the fair-weather boating man, there is a crisp white cotton cap
with a shiny peak, yellow braiding, embroidered badge and goldcoloured anchor.
NAT 6252/56
NAT 6252/57
NAT 6252/58
NAT 6252/59
NAT 6252/60
Size 56
Size 57
Size 58
Size 59
Size 60
The bulk of the cap is made from strong,
100% cotton twill material, with a sweatresistant hem and reinforcing sewn around
the inside. The brims are plastic (not
cardboard), navy-coloured and embroidered
with gold oak leaves and acorns. This is a symbol of high rank in
the American navy, probably derived from the fact that the best
ships were traditionally made from oak. The size-adjusting strap
has a metal buckle, and metal sleeve for tucking away the end
neatly. One size fits all.
NAT 6266
Nauticalia Embroidered Knitted Beanie Hats
Made from a double layer of knitted acrylic, our beanie hats are
very warm and durable. Available plain, or with our most popular
ranks and phrases embroidered (not printed) in contrasting white
thread.
▪▪Navy blue (except Skull & Crossbones (6320), which is black)
▪▪100% acrylic
▪▪One size fits all (adult)
NAT 6310Captain
NAT 6311Skipper
NAT 6312Firstmate
NAT 6313Crew
NAT 6314
Cabin Boy
NAT 6315Wreck
NAT 6316
Ancient Mariner
NAT 6318 Old Seadog
NAT 6319
Captain’s Word
NAT 6320 Skull & Crossbone
Nauticalia Captain’s Socks
For the directionally challenged! Colour
coded socks to identify Port (red) and
Starboard (green). At sea, an emergency
can happen at any time, and it is vital
that everything aboard can be clearly
identified and described. Where ‘left’
and ‘right’ could lead to confusion, ‘port’
and ‘starboard’ are perfectly clear and
unambiguous to a seafarer. Fits sizes 6-11.
Made from 60% cotton 40% nylon.
NAT 6505
Nauticalia Crew Socks
A subtle way to denote rank, and make pairing up easy!
▪▪70% cotton, 29% polyamide, 1% elastane
▪▪To fit shoe sizes 6-11
NAT 6330Captain
NAT 6332
First mate
NAT 6333 Skipper
NAT 6335
Ancient Mariner
NAT 6336 Port & Starboard
NAT 6337
Code Flag L & R
Nauticalia
N
E
W
Nauticalia SafaSail Caps - Head
Protection Designed for Sailors
There are numerous safety hazards on board –
being hit by the boom for example – yet sailors
are often reluctant to wear safety helmets as they
can be heavy, uncomfortable and unattractive.
A large peak protects against bright sunshine,
or a narrow peak version to enable the helm to
look up and see the wind indicator at the top of
the mast.
NAT 5165
NAT 5166
NAT 5167
Navy/Blue, large peak
Navy/Red, large peak
Navy/Red, narrow peak
Rear
Keep clothes off the deck and receive fair
warning of 'I haven't a thing to wear' status!
This laundry bag in sailbag style also has a
drawstring to keep odours in, and is made
from very strong 200 denier nylon.
▪▪22x35"
Black, x 1
Black, x 1.5
Black, x 2
Black, x 2.5
Black, x 3
Black, x 3.5
Tortoiseshell, x 1
Tortoiseshell, x 1.5
Tortoiseshell, x 2
Tortoiseshell, x 2.5
Tortoiseshell, x 3
Tortoiseshell, x 3.5
We don’t need to tell you how useful a bucket can be and you’ll also
know what a nuisance they are to store, especially on board a boat or
caravan - where they tend to get filled up with other stuff...well not
this one! In use, it has a capacity of 11 litres, but
folded up in its bag, measures just 1½” thick.
The outward pressure of the contents keeps the
sides stable.
▪▪Each with their own storage bag
▪▪Measures 12” tall, 11” diameter when in use
NAT 3185BBlue
NAT 3185GGreen
NAT 3185RRed
NAT 3185YYellow
Nauticalia Sea-Searcher Magnet
The side plates channel the power so that in perfect
contact it has a capacity of up to 140-lb, yet is
compass safe at six feet.
▪▪Measures: 4” x 3.25” x 1.25”
▪▪Weight: 2-1/2 lbs
NAT 3101
NAT 90121
Please ask for a Nauticalia Catalogue for a full listing of products
Giftware
Nauticalia Laundry Bag
W
NAT 6224
Bottom
E
An excellent quality cap made from 100%
cotton twill with a suedette brim. Nelson's
immortal signal from the Battle of Trafalgar,
"England Expects...", is embroidered in
colour across the front - perfect for cricket,
rugby and football internationals!
▪▪One size fits all
▪▪LED technology
▪▪Use in low light to enhance reading
▪▪Reduces eye strain
▪▪Comfortable and lightweight
▪▪Long battery life
▪▪Variety of strengths available
▪▪Case and spare batteries included
Nauticalia The Stowaway Folding Buckets
N
Nauticalia Yachting Cap - England Expects
Nauticalia LED Illuminated Reading Glasses
NAT 5520
NAT 5521
NAT 5522
NAT 5523
NAT 5524
NAT 5525
NAT 5530
NAT 5531
NAT 5532
NAT 5533
NAT 5534
NAT 5535
These yachting caps incorporate a hard injectionmoulded shell for protection and foam padding
for comfort and they meet the requirements of
EU Standard Specifications EN812 (similar to
building site bump caps).
231
232
Nauticalia
Nauticalia Galileo Series Instruments
▪▪Distinctive ornamental (but functional) thermometers
utilise 17th century astronomer Galileo Galilei's discovery
that the density of liquids varies with temperature
▪▪Carefully weighted glass globes are suspended in a
liquid-filled tube, where they sedately sink or float as
the surrounding air gets hotter or colder
Nauticalia Stainless Steel Instruments
This stainless steel case is completely corrosion
resistant - suitable for in or outdoor use and
excellent value.
▪▪Diameter 9", depth 1.5"
▪▪Keyhole mounting
NAT 5172Thermometer
Thermometer with Mirror
The clock incorporates smaller dials for humidity
and temperature.
▪▪Temperature is indicated by the engraved
brass tag on the lowest floating globe
NAT 5170Clock
NAT 5171Barometer
NAT 654510"
NAT 654414-1/2"
Galileo Thermometer with Clock
Nauticalia Inclinometer
This brass-cased bubble inclinometer has three
mounting holes for fixing to a bulkhead.
▪▪Diameter 4.5”
▪▪Temperature is indicated by the engraved brass
tag on the lowest floating globe
▪▪This model is mounted in a wooden frame and
includes a quartz clock (battery supplied)
NAT 5062
NAT 654718"
Giftware
W
E
N
Nauticalia
Storm Bottle on Wooden Base
Aboard the HMS Beagle during the Darwin
Expeditions of 1831-36, Captain Robert Fitzroy
developed and refined the 18th century storm
bottle. This involved much testing and observation
and resulted in him being able to make a number
of weather predictions with a fair(ish) degree of
accuracy. The point is that then as now, no one
is quite sure how the storm bottle works. Is it
atmospheric pressure? Temperature? Electrical disturbances? And it’s
this element of uncertainty, of almost magical alchemy, that makes
these storm bottles so fascinating. Stands 16cm high on a traditional
wooden base and comes with Fitzroy’s observations. Will you agree
with them or find new interpretations? The mystery’s been going on
for nearly 180 years. And looks set to continue.
NAT 7031
NAT 7032
W
An essential instrument for any Captain, the
Mutinometer reveals which of the crew may
harbour mutinous tendencies! Gently hold the
Mutinometer in the fist of your hand and watch
the reaction of the liquid inside.
▪▪Size 15cm
E
N
Nauticalia Mutinometer
Galileo Thermometer in Wall Frame
▪▪Temperature is indicated by the engraved
brass tag on the lowest floating globe
NAT 654811"
Galileo Thermometer Desk Stand
▪▪Temperature is indicated by the engraved brass
tag on the lowest floating globe
NAT 65498"
Galileo Barometer
▪▪This model includes a 'storm bottle' type
indicator of changes in barometric pressure useful for forecasting the weather
NAT 654613"
Nauticalia
233
Nauticalia Galileo Thermometers
Nauticalia Captain Campbell’s Vernier Sextant
Distinctive ornamental (but functional)
thermometers utilise 17th century astronomer
Galileo Galilei’s discovery that the density
of liquids varies with temperature. Carefully
weighted glass globes are suspended in a
liquid-filled tube, where they sedately sink or
float as the surrounding air gets hotter or colder.
Temperature is indicated by the engraved brass
tag on the lowest floating globe.
▪▪Temperature is shown in Celsius
A replica dedicated to Royal Navy Captain
John Campbell, who developed the instrument
in 1757. Crucially his invention appeared
at about the same time as the first accurate,
portable chronometers - and the combination
of the two transformed navigation from
guesswork to science, saving countless
lives at sea. This importance gave rise to
the air of mystique which surrounds the
instrument and its use, even in today’s age of
electronic wizardry. Detailing is impressive, with hardwood handle
and protective box, six shades of varying intensity, and a powerful
telescope.
▪▪Instrument measure 8” x 6.5”, box 10” square
NAT 7096
NAT 7094
NAT 7084
NAT 7085
13” Piccolo multi-coloured
24” Piccolo multi-coloured
13” Multi-coloured
17” Multi-coloured
Nauticalia Fob Compass
Dry needle compass in a pocket watchstyle brass case, supplied in a polished
hardwood box.
▪▪Compass dia 1.75", length of chain 18"
▪▪Box measures 3” x 3” x 1.5"
NAT 4531
7084
7096
NAT 4562
Nauticalia Captain Campbell’s
1/4 Size Vernier Sextant
This quarter-size version is an irresistible “musthave” for the desks of instrument collectors and
nautical enthusiasts.
▪▪Sextant measures 4” x 4.5”, box 5” square
NAT 4563
Nauticalia Desk-Top Box & Compass
E
N
Made of chunky brass with a simple working dry
compass encased in the centre. Can be engraved.
▪▪Diameter: 2”
W
NAT 7154
Polished mahogany-stained wooden box for
housing the 7154 compass. Included is a goldplated brass plaque which can be engraved and
attached to the hinged lid.
NAT 7152
Nauticalia Chrome Pocket Compass
NAT 4547
W
NAT 4646
Nauticalia
Gecko Dashboard Pads
E
▪▪Calling cards kept clean and crisp in these slim
brass cases with distinctive features on the lids.
▪▪Each measure 2-1/4" x 3-1/2"
NAT 3151
N
Nauticalia
Business Card Holders
These great-value digital weather
stations make super impulse-buy lines, so are supplied as a mixed
pack of 12 in a counter-top merchandiser. Packed with almost as
many features as instruments several times the price, including:
Time and Date, Weather Forecast, Indoor Temperature and Humidity,
Alarm Clock.
▪▪Uses 2xAAA batteries (not included)
▪▪Display packs of 12
Inspired by the seemingly-miraculous
way Geckos climb effortlessly on even
smooth surfaces, these little patches of
silicone adhere to dashboards and worktops etc to hold phones, satnavs, sunglasses and other small items in place. We don’t know how
it works, but it does so amazingly well. It’s not sticky to the touch,
doesn’t leave a residue, and is endlessly-repositionable.
NAT 5580Black
NAT 5581Grey
NAT 5582Red
NAT 5583Blue
Giftware
Lidded pocket compass with fluorescent
markings.
▪▪1-3/4” diameter x 1/2” deep
Nauticalia
Mini Weather Stations
234
Nauticalia
Believed by some to have been designed in 1804
by the legendary British inventor and polymath
Joseph Crabtree, the functional simplicity of his
brass-and-glass domed “Observatory” magnifier
has never been surpassed or needed modification.
Magnifies about 3x.
Diameter: 2” Height: 1”
▪▪This dice shaker has brass inlaid dice
and anchors and the dice spots are all
individual brass dots
▪▪Measures 3"
This traditional chart weight has a swing-out
magnifying glass and is as useful today as it was
in the days of the great maritime explorers. 2.5”
diameter. This product can be engraved.
NAT 7175
▪▪The oversized wooden dice hinges open
to reveal five regular size dice inside
▪▪Dice spots are brass inlaid
▪▪Height 3”
NAT 4201
NAT 7160
W
E
For quick viewing of distant objects
which need more magnification than
provided by standard binoculars, this
low priced telescope is excellent value
as well as having classic style. The four
sections extend to 13" with 25 times
magnification and 30mm diameter object lens. Tooled in spun
brass, lacquered for lasting protection and bound in hand-stitched
leatherette, with a zipped leatherette carrying case.
N
Nauticalia
Wooden Dominos Set
Nauticalia Brass Pocket Telescope
▪▪A full set of dominoes in a smart
wooden box with brass inlaid corners.
The box has a glass panel set in the top
▪▪Length 8”
NAT 4202
Nauticalia
Cribbage Set
The hinged lid and base fold out to create
the scoring board, which is beautifully
made from contrasting strips of light and
dark wood.
▪▪Folded size 5x 3.5 x 2", opened 10"
Nauticalia
Harbour Master Telescope
▪▪This is a small version telescope, to put
on a desk or table
▪▪It has 12x magnification with a
33mm object lens, and the barrel is
approximately 18" long fully extended.
▪▪Tripod adjusts from 15-24"
NAT 7203
W
E
N
Giftware
Nauticalia
Wooden Dice Box with Dice
W
E
Nauticalia Navigator’s Magnifying Glass
NAT 4200
N
NAT 7176
W
E
Nauticalia
Wooden Dice Shaker
N
Nauticalia Dr. Crabtree’s Patent
Observatory Magnifier
NAT 7165
Nauticalia 8-Piece Boule Set
Nauticalia
Pencil Sharpeners
NAT 7006*Skull
NAT 7008*
Aircraft Carrier
NAT 7009*
Battleship
NAT 7040*Galleon
* Request Items
7006
7008
Jeu de Boules is the beloved national beach sport of the French,
played for centuries by fishermen using suitably weighted and
shaped rocks. The aim is to cast one's boules towards the wooden
jack, knocking opponents' out of the way, with the winner being the
person who ends up with the one closest. Our set consists of four
full-size pairs, each with a distinct pattern (beware undersized, overpriced imitations). They are made in the classic way from chromeplated steel, weighing 22.5-oz (650g) each. Supplied in a tough
nylon carrying bag.
NAT 5694
Nauticalia
Nauticalia Souvenir Bosun’s Call
Nauticalia Shipping Range Ship’s Bell
Less expensive version of the standard
Navy issue. Cannot be tuned or piped
clearly but looks authentic and whistles
well.
▪▪Brass and cooper construction
▪▪43" chain
This larger 12” diameter bell is designed for oceangoing commercial ships and is certificated to meet
international standards for sound-signalling at
sea (in this case between 20 and 100 metres). It is
supplied without brackets, because most vessels of
this size have alternative arrangements.
NAT 2090
NAT 5106
Nauticalia Boxed Bosun’s Call
NAT 8149Bracket
Parts:
In the days of sail, orders aboard ship were
piped on the Bosun's Call, whose highpitched whistle could be heard against the
strongest wind. 4" long, with matching
50" neck chain fitted with a swivel snaphook. They are supplied in a presentation box, with
instruction leaflet and history.
NAT 2111
NAT 2101
235
Brass & Copper
Nickel plated
Nauticalia Coastal Range Ship’s Bells
Ships' bells are manufactured in the finest
tradition - sand-cast solid brass turned and
polished to an immaculate sheen.
NAT 50814"
NAT 50825"
NAT 50836"
Nauticalia Storm Lighter
Originally made by soldiers in the trenches
in World War I from spent bullet cases,
seafarers adopted this practical brass petrol
lighter. The sliding storm-guard shields the
flame, even in a strong wind. When lowered
it operates a snuffer extinguishing the flame
and protecting the wick from spray. With
positive flint control.
▪▪Overall length 3”
NAT 4600
Nauticalia Lanyards
Bell ropes are hand-tied in natural colour cotton
with traditional knots, and make the essential
finishing touch to a ships bell.
NAT 5095
NAT 5096
NAT 5097
Small for 3-6” bells, 4-1/2”
Medium for 5-7” bells, 8-1/2”
Large for 7-12” bells, 11-1/2”
Nauticalia Wood Photo Frames
▪▪Natural wood photo frames in a string of three
▪▪Overall measurement 22" x 6"
NAT 78435**
**Limited Quantities
Giftware
Nauticalia
Pebble Paperweights
NAT 74355**Crab
NAT 74356**
Starfish
** Limited Quatities
Please ask for a Nauticalia Catalogue for a full listing of products
236
Nauticalia
N
W
E
6088
6089
Nauticalia Mugs
Made from high quality porcelain
NAT 6088
Compass, Blue
NAT 6089
Compass, White
NAT 6096Captain
NAT 6098
First Mate
Nauticalia
Canvas Prints
Nauticalia
Code Flag Mugs
Scenes printed on canvas and gallery wrapped onto a 3/4" frame.
NAT 36138
NAT 36139
NAT 36141
NAT 36160
Coast Lighthouse, 40 x 50 cm
Beach, 40 x 50 cm
Boat on Beach, 40 x 50 cm
Beach, 50 x 20 cm
Cream coloured on the inside and navy out, with
the chosen design printed twice on the outside
NAT 6471**Spliced
NAT 6472**Wreck
Nauticalia Campfire-Style Mugs
**Limited Quantities
Giftware
W
E
N
Our new exclusive mugs are designed to look like the enamelled tin
types you used to take camping, but are actually made from high
quality porcelain - so they won't cool down so quickly, burn your
hands, or leave that infamous taste! They are bright white with a
contrasting dark blue rim and choice of nautical phrases/decoration.
Dishwasher and microwave safe.
▪▪Height 3-1/2", diameter 3-1/2"
▪▪Individually boxed
Nauticalia Galleon Mugs
NAT 6066
Grumpy Old Man
NAT 6067
I Am The Captain
NAT 6068
Daily Flogging
NAT 6069
Captains Word Is
NAT 6070Skipper
NAT 6071Captain
NAT 6072
First Mate
NAT 6073Crew
NAT 6075
Ancient Mariner
NAT 6076
Reef Knot
▪▪270 ml
▪▪Good quality bone china mugs with
strong designs of historic ships
▪▪Fully painted inside
NAT 55607Endeavour
NAT 55608
Mayflower
NAT 55609Valiant
NAT 55610
SS President
NAT 55611
East Indiaman
E
N
W
E
W
N
Nauticalia Vintage Boathouse Mugs
▪▪270 ml
▪▪Bone china construction
▪▪Strong designs and fully painted inside
NAT 55546Anchor
NAT 55547Wheel
NAT 55548Propeller
NAT 55549Ship
Nauticalia
Sailor Enamel Ware
▪▪Ceramic materials with a enamel-ware style
NAT 55164
NAT 55165
NAT 55166
NAT 55167
Pot w/lid, 12 cm
Pot w/lid, 16 cm
Mug, 9 cm
Tall Jug
Nauticalia
NAT 6102
NAT 6103
Red (4)
Blue (4)
W
E
Labelled according to rank, these sturdy
plastic mugs come in sets of four,
one each for the Captain, First Mate,
Cabin Boy and Crew - and feature the
Nauticalia ship-in-a-bottle logo. Can
be used for hot and cold drinks and are
dishwasher safe.
Nauticalia
Porthole Flask
N
Nauticalia Coffee Mugs
237
The glass porthole let into this Sheffield pewter
hip flask serves two purposes: so that the
etching of HMS Victory inside the flask can be
viewed; and (perhaps more important!) to check
how much of the favoured tipple remains.
▪▪Fits easily in a jacket pocket
▪▪Diameter 3-3/4", height 4"
▪▪Capacity 140ml
NAT 2196
NAT 78067Red
NAT 78068Blue
Nauticalia Royal Navy Glasses
Keep track of who’s who, and whose drink is whose, with these
smart engraved glass tumblers – helps avoid confusion between
daughter’s lemonade and Dad’s gin and tonic! The additional
decoration is derived from the emblems used on the sleeves of
Royal Naval uniforms.
▪▪Dishwasher safe, capacity 260ml each
NAT 2185Captain
NAT 2186Firstmate
NAT 2187Skipper
NAT 2188Crew
W
E
▪▪Polyresin construction
▪▪450 ml
N
Nauticalia
Lighthouse Mugs
Nauticalia
S/S Tankards
Stainless steel tankards come labelled with
crew positions so everyone knows whose drink
is whose.
▪▪Capacity 500ml
NAT 2202Skipper
NAT 2203Captain
NAT 2204
Ancient Mariner
NAT 2205Crew
Nauticalia Ship’s Wheel Coaster Set
Six solid hardwood coasters (diameter 3.5”)
supplied in a storage unit made by linking
together two very smart looking miniature
ship’s wheels.
▪▪Wheel diameter 5.5”
NAT 4608
Samuel Plimsoll, MP, is remembered for his safe load waterline
mark, introduced to prevent unscrupulous shipping owners from
overloading their ships and so taking excessive risks
with the lives of their crews. It is now found on all
commercial ships worldwide. An attractive whisky
glass, handsomely etched with his image and the
Plimsoll line, in this case used to mark the “safe
load” for a generous helping of spirit. Capacity to
line is 160ml.
Nauticalia Blue and White
Striped Round Coaster Sets
▪▪Sets of 4 coasters
NAT 74357**
** Limited Quatity
Large, 6"
NAT 2184
Nauticalia Naval Rum Measure
Nauticalia Mylne Yacht Design Tableware
The Royal Naval rum was measured in
half-gill tots and variously diluted, often
into a two-gill (half-pint) measure. These
measures are made in the time-honoured
way - from skillfully hand-beaten brass,
copper-plated, polished, then lined with silver to neutralize taste.
The bases are stamped with the prestigious HMS logo. Height: 2”
Alfred Mylne was one of the four
great yacht designers of the early
20th Century, alongside G.L.
Watson, William Fife III & Charles
Nicholson. Mylne opened his own
design office in Glasgow in 1896.
His early racing successes secured
his reputation, and he went on to
design over 400 yachts until his retirement in 1945. Each of our
tablemats and coasters feature one of six designs, showing hull
profile, sail plans and rigging.
▪▪Felt-backed and heat-resistant to 100 degrees
NAT 4700Each
NAT 4339
NAT 4340
Table mats, 30 x 22 cm, 6/pkg
Coasters, 11 x 9 cm, 6/pkg
Giftware
Nauticalia Whisky Glass
238
Nauticalia
Nauticalia Non-Slip HD Roll
Extra thick durable non-slip fabric, providing added
protection against chipping or scratching. Ideal for the
bottom of boat lockers and under gas bottles.
NAT 3250
18" x 6' black
Nauticalia
Apron - Boat Navy Stripes
▪▪Measures: 70 x 110 cm
NAT 78414*
*Request Item
Nauticalia Non-Slip Place Mats
▪▪Set of six rectangular placemats
▪▪12” x 18”
NAT 3240White
NAT 3241Indigo
NAT 3242
Electric blue
NAT 3243Almond
NAT 3244
Forest green
NAT 3245Taupe
NAT 3246Black
Nauticalia
Non-Slip Place Mats and Coasters Set
Giftware
Made from non-slip foam, which is melded onto a polyester mesh.
The unique manufacturing process produces a hard wearing fabric
which is not sticky or stretchy, but grips on both sides. It is durable,
with an attractive open-weave structure that allows air to circulate.
▪▪Washable
▪▪Set of six rectangular placemats (12” x 18”), with six round
coasters (4” diameter)
NAT 3230White
NAT 3231Indigo
NAT 3232Almond
NAT 3233
Forest green
NAT 3234
Electric blue
NAT 3235Taupe
Nauticalia Multi-Purpose Non-Slip Fabric Rolls
These rolls of matting are simple to cut and sew. The fabric is
made from non-slip foam, which is melded onto a polyester mesh.
The unique manufacturing process produces a hard wearing fabric
which is not sticky or stretchy, but grips on both sides. It is durable,
with an attractive open-weave structure that allows air to circulate perfect for marine environments.
▪▪Washable
NAT 3200
NAT 3201
NAT 3202
NAT 3203
NAT 3204
NAT 3205
NAT 3206
NAT 3210
NAT 3211
NAT 3212 NAT 3213
NAT 3214
NAT 3215
NAT 3216
12" x 6' Indigo
12" x 6' Taupe
12" x 6' Almond
12" x 6' Forest green
12" x 6' Black
12" x 6' Blue
12" x 6' White
20" x 6' White
20" x 6' Taupe
20" x 6' Almond
20" x 6' Forest green
20" x 6' Black
20" x 6' Elect blue
20" x 6' Indigo
NAT 3223
12" x 180' Almond
Nauticalia Galley Cloths
Made exclusively for Nauticalia,
our galley cloths feature a wide
range of subjects. Some consider
them too good for mundane chores
and prefer to hang them on the wall
in the galley or kitchen to bring
some nautical cheer. The cloths are
made of 100% cotton.
▪▪Each measures: W: 18” x H: 29"
NAT 6127
Shipping Areas
NAT 6131Knots
NAT 6132
Code Flags
NAT 6138
Why Is A Ship...
NAT 6140Sailing
NAT 6144
Shipping Areas 2
NAT 6146
Beware Pirates
NAT 6145
World Map
Nauticalia
239
N
E
W
Nauticalia
Sailboat Salt/Pepper & Tray Set
▪▪Polyresin construction
▪▪Navy/White
▪▪Height: 9 cm
NAT 78022*
*Request Item
Nauticalia Square Coaster Sets
▪▪A fun range of nautical coasters with a choice
of 12 designs each measuring 4" square
▪▪Wipe clean top with cork base
NAT 3386
NAT 3387
NAT 3388
NAT 3389
NAT 3390
NAT 3391
NAT 3392
NAT 3393
NAT 3394
NAT 3395
NAT 3396
NAT 3397
Nauticalia
Lighthouse Pepper Mills
Any Port in a Storm
Good Yachtsmen Never Grow Old - They Just Keel Over
Gusting Force 1 - No Ripples on the G&T
The Devil May Wear Prada - but the Crew Will Wear Deck Shoes
Nothing Works on a Old Boat - Except the Skipper
Cheers - Somewhere in the World the Sun is Over the Yardarm
Sailing - Galley
Sailing - Navigation
Sailing - Hull Speed
Sailing - Pilotage
Sailing - Ocean Racing
Sailing - Bar
W
NAT 3267Yellow
NAT 3268Green
NAT 3269Purple
E
▪▪For all your hot pans and pots
▪▪Naturally non-slip
▪▪22 cm folded
▪▪Sold by the each
N
Nauticalia Silicone Folding Trivet
▪▪Wood construction
▪▪15 cm
▪▪Two unique designs (subject to availability)
▪▪Sold by the each
NAT 78385
Nauticalia
Lighthouse Magnet Bottle Opener
▪▪Magnet bottle opener in the style of a lighthouse
▪▪Assorted styles
▪▪Sold by the each
NAT 55741
Nauticalia Bottle Opener
Solid brass bottle opener with raised anchor
design and two mounting holes for secure
attachment to a wall or bulkhead. An accessory
that can be appreciated (and is useful) in a
multitude of locations, and won’t get lost!
NAT 4387
Nauticalia Anchor Bottle Opener with Corkscrew
A dish rack would be so handy on board,
but where to stow it? Easy with this one
because it folds up into itself, measuring
just 12” x 8” x 2”. Room for 13 plates
or bowls, with side areas for cutlery
and glasses. An integral drip tray keeps
worktops dry.
Bottle cap remover and corkscrew in
one. The flukes of the anchor give a good
purchase on stubborn corks. Chunky
polished brass castings with stainless steel
"worm" (corkscrew thread).
▪▪Length 5"
NAT 3440
Nauticalia Lighthouse Shakers
Turned from solid brass, these lighthouse
salt and pepper shakers are chrome-plated
top and bottom for contrast, and on the
inside for taste neutrality.
▪▪Height: 4”
NAT 4341
NAT 4392
Nauticalia Bottle Openers
Solid brass bottle openers.
▪▪Wheel opener, length 5.5”.
▪▪Anchor opener, length overall 5.5”
NAT 4382Wheel
NAT 4386Anchor
Giftware
Nauticalia Folding Dish Rack
240
Nauticalia
▪▪Coastal theme
▪▪Set of 12 wooden clips
▪▪5 cm
▪▪Metal sails
▪▪Assorted colours
▪▪12cm
NAT 78457
NAT 55442
N
W
E
Nauticalia
Wood Model Yachts
W
E
W
E
Nauticalia
Wood Model Yachts
N
N
Nauticalia
Paper Clip Set
N
W
E
▪▪Metal sails
▪▪Assorted colours
▪▪21cm
NAT 55443
4820
Nauticalia
Wooden Peg Clip Sets
4821
▪▪Multi-use
▪▪Wood construction
▪▪Sets of six
NAT 4820
Sailing, red/blue
NAT 4821Sealife
NAT 4822
Sailing/globe, blue
Nauticalia
Ornamental Aluminium Yachts
Boldly sculptured in polished aluminium, these countersterned, sloop-rigged yachts make stunning ornaments. The
subtle curves of their sails pick up light and reflections from
surrounding objects to make constantly changing patterns.
4822
7405
Small, L: 8" x 10-1/2"
Large, L: 13" x H: 15-1/2"
7401
7403
Nauticalia Miniature Wooden Boats
Miniature wooden boats are delightfully intricate, (Not a bath toy).
NAT 7401 NAT 7402
NAT 7403
NAT 7404
NAT 7405
Sailing Barge
Fishing Boat, 3-1/2” long
Fish Trawler, 6”
Bermudian Ketch, 6”
Sloop, 5” long
W
7401
Chunky all-wood model yachts in the
style of the great J-class racing yachts
1930s, with cotton sails.
▪▪Requires little self-assembly
▪▪Measures: length 10", height 14"
E
Nauticalia
America's Cup Models
N
Giftware
7404
NAT 5290
NAT 5293
of the
NAT 6900Blue
NAT 6901Cream
Nauticalia Pirate Flags
Made from lightweight 100% polyester and printed right through.
The edge is protected by a stiff white braid, with two brass eyelets
for halyard attachments.
NAT 6218
NAT 6215
Medium, 39” x 22”
Small, 18” x 9”
Nauticalia
241
Nauticalia Repeating Parrot
LONG JOHN SILVER'S REPEATING, REPEATING PARROT
- straight out of Treasure Island, but this one
says whatever you just said twice. Whatever
you just said twice. Whatever you just said
twice. And flaps its wings while doing so.
Immensely enjoyable irritating fun.
▪▪Takes four AA batteries (not included)
Nauticalia Glass Fishing Net Floats
NAT 92091
Encased in netted rope, these hollow floating coloured glass
spheres were used to support fishermen's nets and to mark
lobster pots for retrieval from the seabed. Today they are
commonly used as interesting decor.
▪▪Each is hand-blown to create an authentic bullseye at the
cut-off point - no two are identical (hence measurements
are approximate).
NAT 2221
NAT 2223
NAT 2225
W
E
W
NAT 55274
NAT 55277
Nauticalia
Glass Bottles with String
N
E
N
Nauticalia Cushions
Triple float, 30cm
Green float, 10cm
Double, 36cm
Encased in netted string, these coloured
glass bottles are commonly used as an
interesting decor.
▪▪10 cm
▪▪Assorted colours
▪▪Sold by the each
Lifering Welcome Aboard, 30 cm
Sailboat, 40 cm
NAT 6585
Nauticalia Hurricane Lamp
E
N
NAT 55467
NAT 55468
W
Nauticalia Cushions with Handles
Beach, 57 cm
Coast, 57 cm
▪▪33 x 60 cm
NAT 78421*
NAT 4119
*Request Item
Blue Enamel Tin Plate Hurricane Lamp
E
N
W
Nauticalia Antique Life Rings
▪▪30 cm
NAT 55513Blue
NAT 55514Red
▪▪All the features as above but manufactured for
shore use with a enamel coated tin
NAT 4118
Giftware
Nauticalia Lighthouse Cushion
The hurricane lamp has long been popular with
seafarers, for its robust construction, steady flame and
excellent safety features. They make excellent camping
lights, providing welcome security and comfort on
the darkest of nights. Until recently however, there
was a problem - the tin plate construction was prone
to rapid corrosion in the salty marine environment. To
counteract this, we have produced a solid brass version,
making it suitable for use above and below decks.
▪▪Height including handle 10”
242
Nauticalia
N
Nauticalia Key Ring
W
E
▪▪Polyresin construction
▪▪Puffins in variable designs
▪▪Sold by the each
NAT 45206
Nauticalia Enameled Key Rings
▪▪Chromed steel & polyresin construction
NAT 4612
Nautical Charms
NAT 4613
Parrot Charms
NAT 4614
Fish Charms
NAT 4615Dolphins
NAT 4656
Yacht -Red,White & Blue
NAT 4657
Blue Wheel
NAT 4658
Purple Anchor
NAT 55182
Captain Cap
Nauticalia Key Rings
▪▪Chromed steel & polyresin construction
▪▪Variable colours
▪▪Sold by the each
N
NAT 58537
Starfish, 5 cm
NAT 55562Seahorse
NAT 58559**
Dolphin, 7 cm
W
E
**Limited Quantity
Nauticalia Chrome Key Rings
Nauticalia Key Rings
NAT 4659
Anchor with Gemstone
NAT 4665Wheel
NAT 4668
Bottle opener - Fish Bone
NAT 4669
Bottle opener - Lobster
▪▪Wood construction
▪▪Variable colours
▪▪Sold by the each
W
E
Nauticalia Wooden Key Rings
W
E
NAT 4616Dolphin
NAT 4619Fish
NAT 4634Seahorse
NAT 4805Orca
NAT 4806Penguin
NAT 4807Lifering
NAT 4808Sailboat
NAT 4812Lighthse
NAT 4814Motorboat
N
Giftware
Beach hut, 4.5 cm
Lighthouse, 6 cm
N
NAT 13638
NAT 13639
Nauticalia Chrome Key Rings with Lanyard
4619
4634
NAT 4650Bell
NAT 4651Propeller
NAT 4653Dolphin
NAT 4654Anchor
NAT 4655Wheel
Nauticalia Floating Cork Key Rings
▪▪Cork Floating key ring supports 3 keys
▪▪Champagne Cork supports 6 keys
NAT 4453Round
NAT 4477Champagne
Nauticalia
Nauticalia Brass Key Rings
Nauticalia Brass Key Rack
NAT 4444Wheel/Compass
NAT 4448
Ship’s Wheel
NAT 4450
Ship’s Bell (rings)
NAT 4451
Stockless Anchor
NAT 4454
Whistle (shrill)
NAT 4456Telegraph
NAT 4457
50yr Calendar
NAT 4459
Mini Bosun’s Call
NAT 4473Propeller
NAT 4475
Working Compass (liquid filled)
NAT 4521
Sea Horse
NAT 4523
50-year Calender
NAT 4524Anchor
NAT 4525
Police Whistle
NAT 4526
Monkey Fist Knot
NAT 4529Compass
NAT 4530
Shark Bottle Opener
NAT 4535Lifebelt
NAT 4539
World Globe
NAT 4555
Anchor Lamp
NAT 4556
Diving Helmet
NAT 4584
Telescope (magnifies 3x)
NAT 4832
Miners Lamp LED (lights up)
NAT 5354 Cannon
NAT 7307
Monkey Fist Knot
▪▪Ship’s Wheel - six hooks, 7” diameter
▪▪Single screw-hole for wall mounting.
Nauticalia Swivelling Coat Hook
Hooks that fold away are invaluable where
space is precious. These all-brass hooks are
sturdy with independently swivelling arms.
NAT 4287
3-Way, 3” x 4”
Nauticalia Single Anchor Coat Hooks
▪▪Polished, lacquered solid brass
▪▪H: 3-3/4" x L: 21/4"
NAT 4285
NAT 4286
Single, W: 2.25" x H: 3.75
Triple, W: 8.25" x H: 4.75"
E
W
▪▪Hidden safe
NAT 4283
N
Nauticalia Cork Key Ring
243
NAT 4819
▪▪Polyresin construction
▪▪6 cm
NAT 585364/pkg
Nauticalia
Lighthouse Magnets
Two half magnets back-to-back make a
free-standing whole. Alternatively, each
lighthouse makes two fridge magnets.
▪▪3" high
NAT 7478
Giftware
Nauticalia
Starfish Magnets
W
NAT 581594/pkg
E
▪▪Polyresin construction
▪▪10 cm
N
Nauticalia
Mermaid Magnets
244
Nauticalia
Nautical Greeting Cards
▪▪All cards are blank inside
▪▪Envelope included
Dressed All Over Greeting Cards
Pirate Talk Greeting Cards
NAT 3360** Pirate party planner
NAT 3361** If ye thinks ye be ready to Sail a beauty ye better be NAT 3366
NAT 3367
NAT 3368
NAT 3369
NAT 3370
NAT 3371
Birthday Ahoy
Birthday Buoy
Old Buoys
Fair Winds
Jumble Sails
Vintage Sails
willin' to sink with'er!
NAT 3362** Birthday buoy! Its a pirates life for yer!
** Limited Quantities
Fishy Tales Greeting Cards
NAT 3350 A great fisherman lives here..with the catch of his life
NAT 3351 A reel expert can tackle anything
NAT 3352** To fish, fine and far off, is the first and principle rule Sailing Greeting Cards
Giftware
▪▪15 x 15 cm greeting cards
▪▪Sold by the each
NAT 3330Galley
NAT 3331Navigation
NAT 3332Spinnaker
NAT 3333Flotsam
NAT 3334 Hull Speed
NAT 3335Pilotage
NAT 3336 Ocean Racing
NAT 3337Bar
NAT 3338Regatta
NAT 3339Current
NAT 3399 Happy Birthday - That's My Bouy
NAT 3400 Size Matters - Coleg: No.1
NAT 3401 Sailing is just like sex, when it's good it's really good...
for trout angling
Give a man a fish and he has food for a day. Teach a man to fish and has to buy...
NAT 3356** Out now...Anglers Almanac..the beat times to go fishing
NAT 3357 Fishing rules
NAT 3358 Good fishermen never grow old..They just smell that way
NAT 3359 A woman who has never seen her husband fishing doesn't know how patient a man she has married
NAT 3353
** Limited Quantities
when it's bad, it's still kind of good
NAT 3405Happiness...Destination
NAT 3406 Don't Follow your dreams...Chase Them
NAT 3407 Explore, Dream, Discover
NAT 3408 Paradise is not a Place - it's a State of Mind
Nautical Greeting Cards
NAT 3378
NAT 3380
NAT 3381
Green light to starboard - Cold beers aboard
Fish Come In Three Sizes - Large, Huge and the One That Got Away
Good fishermen never grow old - the just forget how to use their Tackle
Please ask for a Nauticalia Catalogue for a full listing of products
Nauticalia / L’il Sucker
245
SandScript Greeting Cards
▪▪15 x 15 cm greeting cards
▪▪Sold by the each
Salty Saying Greeting Cards
NAT 2632 Happy Birthday (Present)
NAT 2633 With Love (Heart)
NAT 2634 Happy Birthday (Pebble)
NAT 2635
Pebble Heart
NAT 2636
Happy Birthday
NAT 2637
Just To Say
NAT 2638
With Love
NAT 2639
Thank You
NAT 2640
Happy Annivrsary
NAT 2641
Just To Say
NAT 2642
Now Home
NAT 2643
Life's A Beach
NAT 2644Congratulations
NAT 2645
You're A Star
NAT 2646
Good Luck
NAT 2647
Love U
NAT 2648
Thank You
NAT 2649
Your Retirement
NAT 2650
Get Well
NAT 2655
Happy Birthday Seashore
NAT 3340
NAT 3341
NAT 3342
NAT 3343
NAT 3344
NAT 3345
NAT 3346
NAT 3347
NAT 3348
NAT 3349
NAT 3374
NAT 3375
NAT 3376
NAT 3379
NAT 3402
Any port in a storm
Good sailors never grow old..They just get a little dinghy
Good yachtsmen never grow old..They just keel over
Gusting force 1..No ripples on the G&T
The devil may wear Prada..But the crew wear deck shoes
Give a man a fish & he will eat for a day..Teach a man to fish & he will sit in a boat all day & drink BEER
There are the haves..& the have yachts
Home is where the boat is
Nothing work on an old boat except the skipper
Cheers! Somewhere in the world the sun is over the yardarm
Fair Winds & Following Seas
Happy Birthday - Ancient Mariner
Happy Birthday - Armchair Sailor
Allways Remenber - Leave Your Red Wine to Port
Shi****P Happens
SandScript Audio Greeting Cards
▪▪Cards play sounds of the sea when opened
▪▪15 x 15 cm greeting cards
▪▪Sold by the each
NAT 2651
NAT 2652
NAT 2653
NAT 2654
Happy Birthday (Present)
Happy Birthday Seashore
With Love (Heart)
Just To Say
W
E
N
L’il Sucker Snap Capp
▪▪Snap-on, pop-off drink protection that
is reusable & dishwasher safe
▪▪Fewer spills and no more flat drinks
▪▪Fits most drink cans
▪▪Counter display pack of 24
LIS SNAP CAP
Giftware
L’il Sucker
Rigging Hardware
247
AEROFAST
248
ARCO
249
BLUE WAVE
251
COTTER PINS
248
JOHNSON
267
LOOS
275
STA-LOK
276
RIGGING WIRE
278
248
Aerofast / Cotter Pins
Aerofast Fast Pins
Aerofast Fast Pins Cont.
Standard detent pin manufactured in a
centerless ground 303 stainless steel.
▪▪Sold by the each, bulk or packaged (P)
AER C6-10R-303
AER C6-10R-303-P
1”
1”
AER C6-15R-303
1”
1”
AER C6-15R-303-P
3/8” x 1-1/2”
1”
1”
AER C6-20R-303
3/8” x 2”
1”
3/16” x 3/4”
1”
AER C6-20R-303-P
3/8” x 2”
1”
3/16” x 3/4”
1”
AER C6-25R-303
3/8” x 2-1/2”
1”
3/16” x 1”
1”
AER C6-25R-303-P
3/8” x 2-1/2”
1”
AER C3-05R-303
3/16” x 1/2”
AER C3-05R-303-P
3/16” x 1/2”
AER C3-08R-303
AER C3-08R-303-P
AER C3-10R-303-P
Ring
3/8” x 1”
3/8” x 1”
Ring
AER C3-10R-303
Dimensions
AxB
3/8” x 1-1/2”
Dimensions
AxB
Part #
3/16” x 1”
1”
AER C6-30R-303
3/8” x 3”
1”
AER C3-13R-303
3/16” x 1-1/4”
1”
AER C6-30R-303-P
3/8” x 3”
1”
AER C3-13R-303-P
3/16” x 1-1/4”
1”
AER C6-50R-303
3/8” x 5”
1”
AER C3-15R-303
3/16” x 1-1/2”
1”
AER C6-50R-303-P
3/8” x 5”
1”
AER C3-15R-303-P
3/16” x 1-1/2”
1”
AER C8-13R-303
1/2” x 1-1/4”
1-1/4”
3/16” x 2”
1”
AER C8-13R-303-P
1/2” x 1-1/4”
1-1/4”
AER C3-20R-303
AER C3-20R-303-P
Rigging Hardware
Part #
3/16” x 2”
1”
AER C8-15R-303
1/2” x 1-1/2”
1-1/4”
AER C3-25R-303
3/16” x 2-1/2”
1”
AER C8-15R-303-P
1/2” x 1-1/2”
1-1/4”
AER C3-25R-303-P
3/16” x 2-1/2”
1”
AER C8-20R-303
1/2” x 2”
1-1/4”
AER C3-30R-303
3/16” x 3”
1”
AER C8-20R-303-P
1/2” x 2”
1-1/4”
AER C3-30R-303-P
3/16” x 3”
1”
AER C8-30R-303
1/2” x 3”
1-1/4”
AER C4-05R-303
1/4” x 1/2”
1”
AER C8-30R-303-P
1/2” x 3”
1-1/4”
AER C4-05R-303-P
1/4” x 1/2”
1”
AER C8-40R-303
1/2” x 4”
1-1/4”
AER C4-08R-303
1/4” x 3/4”
1”
AER C8-40R-303-P
1/2” x 4”
1-1/4”
AER C4-08R-303-P
1/4” x 3/4”
1”
AER C4-10R-303
1/4” x 1”
1”
AER C4-10R-303-P
Aerofast Hitch Pins
1/4” x 1”
1”
AER C4-13R-303
1/4” x 1-1/4”
1”
▪▪316 stainless steel construction
▪▪Sold by the each, bulk or packaged (P)
AER C4-13R-303-P
1/4” x 1-1/4”
1”
AER C4-15R-303
1/4” x 1-1/2”
1”
AER HC-2SS
AER C4-15R-303-P
1/4” x 1-1/2”
1”
AER HC-2SS-P
3/8”
AER C4-18R-303
1/4” x 1-3/4”
1”
AER HC-3SS
1/2”
AER C4-18R-303-P
1/4” x 1-3/4”
1”
AER HC-3SS-P
1/2”
1/4” x 2”
1”
AER HC-4SS
3/4”
3/4”
AER C4-20R-303
AER C4-20R-303-P
Part #
Jaw Size
3/8”
1/4” x 2”
1”
AER HC-4SS-P
AER C4-25R-303
1/4” x 2-1/2”
1”
AER HC-5SS
1”
AER C4-25R-303-P
1/4” x 2-1/2”
1”
AER HC-5SS-P
1”
1/4” x 3”
1”
AER C4-30R-303
AER C4-30R-303-P
1/4” x 3”
1”
AER C5-10R-303
5/16” x 1”
1”
AER C5-10R-303-P
5/16” x 1”
1”
AER C5-15R-303
5/16” x 1-1/2”
1”
AER C5-15R-303-P
5/16” x 1-1/2”
1”
AER C5-20R-303
5/16” x 2”
1”
AER C5-20R-303-P
5/16” x 2”
1”
AER C5-25R-303
5/16” x 2-1/2”
1”
AER C5-25R-303-P
5/16” x 2-1/2”
1”
AER C5-30R-303
5/16” x 3”
1”
AER C5-30R-303-P
5/16” x 3”
1”
Cotter Pins
316 stainless steel cotter pins.
FIP SP-116-12
FIP SP-332-58
FIP SP-332-34
FIP SP-332-1
FIP SP-332-114
FIP SP-332-112
FIP SP-18-34
FIP SP-18-1
FIP SP-18-114
FIP SP-18-112
FIP SP-18-2
1/16” x 1/2”
3/32” x 5/8”
3/32” x 3/4”
3/32” x 1”
3/32” x 1-1/4”
3/32” x 1-1/2”
1/8” x 3/4”
1/8” x 1”
1/8” x 1-1/4”
1/8” x 1-1/2”
1/8” x 2”
FIP SP-532-1
FIP SP-532-114
FIP SP-532-112
FIP SP-316-34
FIP SP-316-1
FIP SP-316-114
FIP SP-316-112
FIP SP-316-2
FIP SP-316-214
5/32” x 1”
5/32” x 1-1/4”
5/32” x 1-1/2”
3/16” x 3/4”
3/16” x 1”
3/16” x 1-1/4”
3/16” x 1-1/2”
3/16” x 2”
3/16” x 2-1/4”
249
ARCO
ARCO Aircraft Forks
ARCO Aircraft Eyes
316 stainless steel construction.
316 stainless steel construction.
Part #
Wire
Hole
ALE AE-3
3/32”
3/16”
1/8”
ALE AE-4
1/8”
3/16”
3/16”
7/32”
ALE AE-5
5/32”
1/4”
3/16”
3/16”
5/16”
1/4”
Wire
Hole
ALE AF-3
3/32”
3/16”
1/8”
ALE AF-4
1/8”
3/16”
3/16”
ALE AF-5
5/32”
1/4”
Part #
Fork
Head Width
ALE AF-6
3/16”
5/16”
1/4”
ALE AE-6
ALE AF-7
7/32”
5/16”
5/16”
ALE AE-7
7/32”
5/16”
9/32”
1/4”
3/8”
5/16”
ALE AF-8
1/4”
3/8”
5/16”
ALE AE-8
ALE AF-9
9/32”
7/16”
11/32”
ALE AE-9
9/32”
7/16”
11/32”
5/16”
7/16”
11/32”
3/8”
1/2”
3/8”
ALE AF-10
5/16”
7/16”
11/32”
ALE AE-10
ALE AF-12
3/8”
1/2”
3/8”
ALE AE-12
ARCO Clevis Pins
ARCO Marine Eyes
316 stainless steel construction.
316 stainless steel construction.
Diameter
Working
Length
For
Series
ALE CPAF-3
3/16”
9/32”
AF-3
ALE CPAF-4
3/16”
13/32”
AF-4
ALE CPAF-5
1/4”
7/16”
AF-5
ALE CPAF-6
5/16”
9/16”
AF-6
ALE CPAF-7
5/16”
21/32”
AF-7
ALE CPAF-8
3/8”
23/32”
AF-8
ALE CPAF-9
7/16”
3/4”
AF-9
ALE CPAF-10
7/16”
25/32”
AF-10
ALE CPAF-12
1/2”
27/32”
AF-12
ALE CPAF-16
5/8”
1-1/16”
AF-16
ALE CPFT-24
3/4”
1-9/16”
-
Part #
Part #
Wire
Head Width
Hole
ALE ME-3
3/32”
1/8”
1/4”
ALE ME-4
1/8”
3/16”
1/4”
ALE ME-5
5/32”
15/65”
5/16”
ALE ME-6
3/16”
5/16”
3/8”
ALE ME-7
7/32”
3/8”
7/16”
ALE ME-7-3/8
7/32”
3/8”
3/8”
ALE ME-8
1/4”
3/8”
1/2”
ALE ME-8-7/16
1/4”
3/8”
7/16”
ALE ME-9
9/32”
1/2”
1/2”
ALE ME-10
5/16“
1/2”
1/2”
ALE ME-10S
5/16”
9/16”
5/8”
ALE ME-12
3/8”
5/8”
5/8”
ARCO T-Terminal with Eyes
ALE TRB-41/8”
ALE TRB-63/16”
ALE TRB-81/4”
ALE TRB-105/16”
ARCO Threaded Eyes
316 stainless steel construction.
Thread
Size
Hole
ALE TE10LH
5/16” LH
ALE TE12LH
3/8” LH
ALE TE16LH
1/2” LH
Part #
Thread
Length
TPI
ARCO Swage Studs
5/16”
2-1/4”
24
316 stainless steel construction.
3/8”
2-19/32”
24
1/2”
2-31/32”
20
ALE SS7-3/8
ALE SS7-7/16
ALE SS8-7/16
7/32” wire x 3/8”-24 RH threaded
7/32” wire x 7/16”-20 RH threaded
1/4” wire x 7/16”-20 RH threaded
ARCO Sailmaker Eyes
316 stainless steel construction.
ALE SE-6-E
ALE SE-8-E
3/16" Wire, 1/4” Pin
1/4” Wire 1/2” Pin
Rigging Hardware
316 stainless steel construction.
251
Blue Wave - Rigging
Blue Wave Quick Rig Tune Turnbuckles - QRT
The QRT is Blue Waves top racing rigging screw. Developed specifically for
the hardcore racing crew.
▪▪For racing dinghies and small keelboats
▪▪Laser engraved calibration scale for precise adjustment
▪▪Handle for one end quick adjustment and easy locking
▪▪AISI 316 stainless steel body and terminal with chromed bronze nut
▪▪Toggle fork for 1/8” - 9/32” wire
Part # Right
Wire
Teminal
G
Pin
A
B
Min-Max
L1
L2
Break Load
Eye
1/4”
6.35
8
16
139 - 179
56
169
1,300 kg
BLU QRT19014
BLU QRT32014
3.0
Wire
1/4”
6.35
8
16
172 - 212
52
169
1,300 kg
BLU QRT04516
Ø4-5/32”
Wire
5/16”
8
10
20
201 - 251
60
201
2,350 kg
BLU QRT05516
Ø5-3/16”
Wire
5/16”
8
10
20
208 - 258
60
201
2,350 kg
Blue Wave Smart Pins
The smart pins are a fast and revolutionary new way of securing open
body rigging screws. Simply put the pin attached to the Velcro strap into
the split pin hole and secure the Velcro strap around the rigging screw.
▪▪316 S/S construction
▪▪4/pkg
For Turnbuckles
L(mm)
B(mm)
H(mm)
Pin(mm)
1/4”
150
16
8
2.0
BLU VP1225P4
5/16” & 3/8”
190
16
10
2.5
BLU VP1632P4
7/16” & 1/2”
260
20
13
3.2
BLU VP2340P4
5/8” & 3/4”
370
25
20
4.0
BLU BWLUB1
50 gram tube
W
▪▪Blue Wave lubricant contains PTFE micro powder, dispersed in
a synthetic base oil with anti-oxidation additives
▪▪A highly effective lubricant, with long life properties, for use
in metal to metal applications
▪▪Water repellent, will not soil and performs in temperatures
between - 40°C and +100°C
▪▪Non ageing and has exrtemely low friction
E
N
Blue Wave Lubricant
Rigging Hardware
Part #
BLU VP1020P4
252
Blue Wave - Rigging
Blue Wave Turnbuckles - Fork/Fork
Highly polished AISI 316 stainless steel construction.
Part #
M
L1
L2
L4
L5
A
Break Load
BLU 120005
M5
180
126
9.4
80
7.8
800 kg
BLU 120006
M6
200
138
9.4
92
7.5
1,250 kg
BLU 120008
M8
234
158
10.4
112
6.0
1,300 kg
Part #
G UNF
L1
L2
L4
L5
A
Break Load
BLU 120006A
1/4”
9-1/8”
5-1/2”
33/64”
3-5/8”
3/8”
2,850 lbs
BLU 120008A
5/16”
9-1/2”
5-5/8”
19/32”
4-13/32”
7/16”
5,150 lbs
BLU 120010A
3/8”
11”
7-11/16”
3/4”
4-23/64”
15/32”
7,700 lbs
BLU 120011A
7/16”
12-7/32”
8-5/8”
7/8”
5-63/64”
15/32”
10,300 lbs
BLU 120012A
1/2”
13-25/32”
9-19/32”
63/64”
5-63/64”
9/16”
11,850 lbs
Blue Wave Turnbuckles - Fork/Terminal
Highly polished AISI 316 stainless steel construction.
Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin
Size
Break
Load
2,850 lbs
BLU 120306A
1/4”
1/8”
9-5/32”
6-11/16”
33/64”
3-5/8”
3/8”
1/4”
BLU 120408A
5/16”
5/32”
10-13/16”
7-27/32”
19/64”
4-13/32”
7/16”
5/16”
5,150 lbs
BLU 120508A
5/16”
3/16”
11-1/4”
8-1/4”
19/64”
4-13/32”
7/16”
5/16”
5,150 lbs
BLU 120510A
3/8”
3/16”
12-1/4”
8-15/16”
3/4”
4-33/32”
15/32”
3/8”
7,700 lbs
BLU 126310A
3/8”
1/4”
12-1/4”
8-15/16”
3/4”
5-63/64”
15/32”
3/8”
7,700 lbs
Blue Wave Turnbuckles - Toggle/Terminal
Rigging Hardware
Highly polished AISI 316 stainless steel construction.
Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin
Break Load
BLU 320306A
1/4”
1/8”
9-31/32”
7-17/32”
43/64”
3-5/8”
5/16”
1/4”
2,850 lbs
BLU 320406A
1/4”
5/32”
10-3/8”
7-29/32”
43/64”
3-5/8”
5/16”
1/4”
2,850 lbs
BLU 320408A
5/16”
5/32”
11-31/32”
8-31/32”
25/32”
4-13/32”
25/64”
5/16”
5,150 lbs
BLU 320508A
5/16”
3/16”
12-7/32”
9-7/32”
25/32”
4-13/32”
25/64”
5/16”
5,150 lbs
BLU 320510A
3/8”
3/16”
13-24/32”
10-11/32”
1-1/32”
4-23/32”
15/32”
3/8”
7,700 lbs
Blue Wave Turnbuckles - Toggle/Terminal
Highly polished AISI 316 stainless steel construction with a chromed bronze body.
Part #
G UNF
Wire
L1
L2
L4
L5
A
Pin
Break Load
BLU 330306A
1/4”
1/8”
10-1/32”
7-19/32”
43/64”
3-15/16”
5/16”
1/4”
2,850 lbs
BLU 330408A
5/16”
5/32”
11-31/32”
8-31/32”
25/32”
4-27/32”
25/64”
5/16”
5,150 lbs
BLU 330510A
3/8”
3/16”
13-47/64”
10-7/16”
1-1/32”
5-5/16”
15/32”
3/8”
7,700 lbs
BLU 335510A
3/8”
7/32”
14-1/16”
10-3/4”
1-1/32”
5-5/16”
15/32”
3/8”
7,700 lbs
BLU 336310A
1/2”
1/4”
16”
12”
1-3/8”
6-11/16”
1-12”
1/2”
7,700 lbs
BLU 336312AX
1/2”
1/4”
16-47/64”
12-9/16”
1-3/8”
6-11/32”
23/32”
1/2”
11,850 lbs
BLU 330812AX
1/2”
5/16”
17-41/64”
13-15/32”
1-3/8”
6-11/16”
23/32”
1/2”
11,850 lbs
BLU 339520AX
3/4”
3/8”
24-5/8”
18-5/16”
1-21/32”
9-27/32”
15/16”
3/4”
28,600 lbs
Blue Wave - Rigging
253
Blue Wave Open Body Toggle/Blank Turnbuckles
Highly polished AISI 316 stainless steel construction with a chromed bronze body.
G UNF
L1
L2
A
G
BLU 330006AS
Part #
1/4”
6-13/16”
5-9/16”
5/16”
1/4”
Break Load
2,850 lbs
BLU 330008AS
5/16”
8-5/32”
6-39/64”
25/64”
5/16”
5,150 lbs
BLU 330010AS
3/8”
9-13/32”
7-13/16”
15/32”
3/8”
7,700 lbs
BLU 330011AXS
7/16”
10-9/16”
8-13/16”
19/32”
7/16”
10,300 lbs
BLU 330012AXS
1/2”
11-11/16”
9-17/32”
23/32”
1/2”
11,850 lbs
BLU 330016AXS
5/8”
14-7/8”
12-5/32”
25/32”
5/8”
17,600 lbs
BLU 330020AXS
3/4”
19”
14-1/2”
15/16”
3/4”
28,600 lbs
See page xxx for matching Swage Studs
Blue Wave Turnbuckles - Toggle/Fork
Highly polished AISI 316 stainless steel construction.
Part #
G UNF
L1
L2
B1
B2
A1
A2
Pin
Break Load
BLU 320006A
1/4”
8-23/32”
6-3/16”
33/64”
43/64”
5/16”
3/8”
1/4”
2,850 lbs
BLU 320008A
5/16”
10-9/16”
7-9/16”
19/32”
25/32”
25/64”
7/16”
5/16”
5,150 lbs
BLU 320010A
3/8”
12-1/4”
8-15/16”
3/4”
1-1/32”
15/32”
15/32”
3/8”
7,700 lbs
Blue Wave Swage Toggles
Highly polished AISI 316 stainless steel construction.
Part #
D Pin
L1
L2
L4
A
B
Break Load
1/8”
1/4”
3-5/64”
1-1/2”
1/2”
43/64”
5/8”
2,850 lbs
BLU 500804
5/32”
5/16”
3-45/64”
1-49/64”
5/8”
25/32”
3/4”
2,850 lbs
BLU 509505
3/16”
3/8”
4-7/16”
2”
3/4”
1-1/32”
63/64”
7,700 lbs
BLU 509555
7/32”
3/8”
4-7/8”
2-5/16”
3/4”
1-1/32”
15/16”
7,700 lbs
BLU 501163X
1/4”
7/16”
5-45/64”
2-17/32”
57/64”
1-9/64”
63/64”
10,300 lbs
BLU 501263X
1/4”
1/2”
5-15/16”
2-17/32”
31/32”
1-3/8”
1-7/32”
13,600 lbs
BLU 501207X
9/32”
1/2”
6-3/16”
2-3/4”
31/32”
1-3/8”
1-7/32”
13,600 lbs
BLU 501608X
5/16”
5/8”
7-13/16”
3-17/64”
1-9/64”
1-21/32”
1-7/16”
21,500 lbs
BLU 501695
3/8”
5/8”
8-31/32”
3-15/16”
1-9/64”
1-21/32”
3/4”
28,600 lbs
BLU 501995X
3/8”
3/4”
8-31/32”
3-15/16”
1-13/64”
1-11/16”
1-21/32”
28,600 lbs
Rigging Hardware
Wire
BLU 500603
254
Blue Wave - Rigging
Blue Wave Fixed Fork Terminals - Welded
Highly polished AISI 316 stainless steel construction.
Part #
Wire
D1
L1
L3
L4
A
Break Load
BLU 100525
3/32”
7/32”
2-9/32”
1-17/64”
15/32”
19/64”
1,760 lbs
BLU 100503
1/8”
13/64”
2-9/16”
1-1/2”
15/32”
19/64”
1,760 lbs
BLU 100603
1/8”
15/64”
2-19/32”
1-1/2”
33/64”
3/8”
2,750 lbs
BLU 100504
5/32”
13/64”
2-13/16”
1-25/32”
15/32”
19/64”
1,760 lbs
BLU 100604
5/32”
15/64”
2-7/8”
1-25/32”
33/64”
3/8”
2,750 lbs
BLU 100804
5/32”
5/16”
3-1/32”
1-25/32”
19/32”
7/16”
5,150 lbs
BLU 100605
3/16”
1/4”
3-1/8”
1-25/32”
33/64”
3/8”
2,860 lbs
BLU 100805
3/16”
5/16”
3-5/16”
2”
19/32”
7/16”
5,150 lbs
BLU 109505
3/16”
3/8”
3-15/32”
2”
3/4”
15/32”
7,700 lbs
BLU 109506
M6
12.58mm
104mm
64mm
3/4”
12mm
3,500 kg
BLU 109555
7/32”
3/8”
3-3/4”
2-3/8”
3/4”
1/2”
7,700 lbs
BLU 101163
1/4”
7/16”
4-3/16”
2-17/16”
29/32”
15/32”
9,030 lbs
BLU 101207
9/32”
15/32”
4-39/64”
2-3/4”
63/64”
9/16”
11,240 lbs
BLU 101208
5/16”
15/32”
5-1/8”
3-17/64”
63/64”
9/16”
11,240 lbs
BLU 101495
3/8”
9/16”
5-15/16”
3-1/2”
1-3/16”
23/32”
16,700 lbs
BLU 101913
1/2”
27/32”
8-1/16”
4-3/4”
1-57/64”
61/64”
28,600 lbs
Blue Wave Left Threaded Swage Studs - Imperial
Highly polished AISI 316 stainless steel construction.
▪▪Drilled for split pin
Part # Left
Rigging Hardware
BLU 940306A
G UNF
Wire
D1
L1
L2
L3
Break Load
1/4”
1/8”
1/4”
3-15/16”
1-57/64”
1-1/2”
2,850 lbs
BLU 940406A
1/4”
5/32”
19/64”
4-21/64”
1-57/64”
1-13/16”
2,850 lbs
BLU 940408A
5/16”
5/32”
19/64”
4-39/64”
2-5/16”
1-13/16”
5,150 lbs
BLU 940508A
5/16”
3/16”
23/64”
4-27/32”
2-5/16”
2-1/64”
5,150 lbs
BLU 940510A
3/8”
3/16”
23/64”
5-1/8”
2-31/64”
2-1/64”
7,700 lbs
BLU 945510A
3/8”
7/32”
27/64”
5-11/32”
2-31/64”
2-1/64”
7,700 lbs
BLU 946310A
3/8”
1/4”
1/2”
5-45/64”
2-31/64”
2-1/64”
7,700 lbs
BLU 946312A
1/2”
1/4”
1/2”
6-3/8”
3-5/32”
2-3/4”
11,850 lbs
Blue Wave Threaded Swage Studs - Metric
Highly polished AISI 316 stainless steel construction.
Part # Right
Part # Left
BLU 900408
BLU 910408
G Metre
Wire
D1
L1
L2
L3
Break Load
M8
5/32”
3/8”
4-39/64”
1-49/64”
2-1/4”
5,150 lbs
BLU 900508
BLU 900510
BLU 910508
M8
3/16”
25/64”
4-27/32”
2”
2-1/4”
5,150 lbs
BLU 910510
M10
3/16”
25/64”
5-1/8”
2”
2-15/32”
7,700 lbs
Blue Wave - Rigging
255
Blue Wave Right Threaded Swage Studs - Imperial
Highly polished AISI 316 stainless steel construction.
▪▪Drilled for split pin
Part # Right
G UNF
Wire
D1
L1
L2
L3
Break Load
BLU 930306A
1/4”
1/8”
1/4”
3-15/16”
1-57/64”
1-1/2”
2,850 lbs
BLU 930406A
1/4”
5/32”
19/64”
4-21/64”
1-57/64”
1-13/16”
2,850 lbs
BLU 930408A
5/16”
5/32”
19/64”
4-39/64”
2-5/16”
1-13/16”
5,150 lbs
BLU 930508A
5/16”
3/16”
23/64”
4-27/32”
2-5/16”
2-1/64”
5,150 lbs
BLU 930510A
3/8”
3/16”
23/64”
5-1/8”
2-31/64”
2-1/64”
7,700 lbs
BLU 935510A
3/8”
7/32”
27/64”
5-11/32”
2-31/64”
2-1/64”
7,700 lbs
BLU 936310A
3/8”
1/4”
1/2”
5-45/64”
2-31/64”
2-1/64”
7,700 lbs
BLU 936311A
7/16”
1/4”
1/2”
6-1/4”
2-45/64”
2-1/64”
10,300 lbs
BLU 930711A
7/16”
9/32”
9/16”
6-3/8”
2-45/64”
2-3/4”
10,300 lbs
BLU 930712A
1/2”
9/32”
9/16”
6-11/16”
2-45/64”
2-3/4”
11,850 lbs
BLU 930812A
1/2”
5/16”
5/8”
7-9/32”
2-45/64”
3-5/32”
11,850 lbs
BLU 936312A
1/2”
1/4”
1/2”
6-3/8”
2-45/64”
2-3/4”
11,850 lbs
BLU 930816A
5/8”
5/16”
5/8”
8-21/32”
3-5/32”
3-17/64”
17,600 lbs
BLU 939516A
5/8”
3/8”
45/64”
8-21/32”
3-15/16”
3-1/2”
17,600 lbs
BLU 939520A
3/4”
3/8”
45/64”
9-1/16”
4-23/32”
3-1/2”
28,600 lbs
Blue Wave Swageless Eye Terminals
Highly polished AISI 316 stainless steel construction.
Part #
Wire
L1
L2
L3
T
D
KW1
KW2
BL
(lbs)
BLU 821907*
9/32”
4-1/8”
3-1/2”
2”
23/64”
33/64”
45/64”
53/64”
10,340
BLU 821908*
5/16
4-49/64”
4-3/64”
2-1/16”
3/8”
9/16”
3/4”
15/16”
12,320
*Request Items
Blue Wave Swage Eyes
Highly polished AISI 316 stainless steel construction.
Part #
D1
D3
L1
L2
T
Break Load
BLU 190025
3/32”
3/16”
7/32”
1-15/16”
BLU 190003
1/8”
1/4”
1/4”
2-5/32”
1-1/4”
1/8”
1,750 lbs
1-1/2”
5/32”
2,850 lbs
BLU 190004
5/32”
5/16”
21/64”
2-5/8”
1-49/64”
3/16”
5,150 lbs
BLU 190005
3/16”
3/8”
27/64”
3”
2”
15/64”
7,700 lbs
BLU 190055
7/32”
3/8”
27/64”
3-11/32”
2-5/16”
15/64”
7,700 lbs
BLU 190063X
1/4”
1/2”
1/2”
4-1/8”
2-17/32”
25/64”
13,600 lbs
BLU 190007X
9/32”
1/2”
1/2”
4-21/64”
2-3/4”
25/64”
13,600 lbs
BLU 190008
5/16”
9/16”
37/64”
4-21/32”
3-17/64”
25/64”
16,700 lbs
BLU 190008X
5/16”
5/8”
37/64”
5-9/16”
3-17/64”
15/32”
21,500 lbs
BLU 190095
3/8”
5/8”
41/64”
5-1/2”
3-1/2”
7/16”
21,500 lbs
BLU 190095X
3/8”
3/4”
41/64”
6-1/2”
3-15/16”
5/8”
28,600 lbs
BLU 190013
1/2”
1/2”
49/64”
7-1/32”
4-23/32”
19/32”
28,600 lbs
Rigging Hardware
Wire
E
N
Blue Wave T-Rope Eyes - Forged
Part #
BLU 616508F
W
Highly polished AISI 316 stainless steel construction.
Rope
A1
A2
D1
D2
D3
R
5/32”
5/16”
11/32”
3/8”
23/32”
11/32”
5/32”
BLU 616512F
1/4”
1/2”
9/16”
17/32”
1-9/16”
35/64”
3/16”
BLU 616516F
5/16”
5/8”
45/64”
11/16”
1-25/64”
45/64”
1/4”
256
Blue Wave - Rigging
Blue Wave T-Rope Eyes
Highly polished AISI 316 stainless steel construction.
Part #
Rope
B
B1
B2
L1
L2
D
T
BLU 616506
1/8”
19/64”
1-3/32”
19/32”
3-3/32”
1-1/64”
1/4”
1/4”
BLU 616507
5/32”
21/32”
1-3/32”
19/32”
3-5/16”
1-1/64”
19/64”
19/64”
BLU 616509
3/16”
23/32”
1-19/32”
7/8”
3-59/64”
1-3/8”
11/32”
23/64”
BLU 616512
1/4”
1-5/64”
1-17/32”
7/8”
4-7/16”
1-3/8”
1/2”
1/2”
Blue Wave Stemball Eyes
Rigging Hardware
Highly polished AISI 316 stainless steel construction.
Part #
L1
L2
L3
BLU 19620926
3-1/4”
5/8”
7/16”
BLU 19621226
3-7/8”
39/64”
7/16”
BLU 19621426
4-1/8”
23/32”
3/8”
BLU 19621634
5”
13/16”
1/2”
L4
L5
D1
D2
R
13/16”
1/4”
13/32”
1”
3/8”
31/32”
5/16”
1/2”
1”
3/8”
1-1/16”
7/32”
1/2”
1”
3/8”
1-9/64”
3/8”
5/8”
1-11/32”
9/16”
Blue Wave Stemball Terminals
Blue Wave “T” Terminals
Highly polished AISI 316 stainless steel construction.
Highly polished AISI 316 stainless steel
construction with swage depth marking.
Part #
Wire
L1
L2
L3
D1
D3
BLU 620003
1/8”
2-15/16”
2-1/8”
1-1/2”
1/4”
33/64”
BLU 620004
5/32”
2-23/32”
2-15/32”
1-49/64”
5/16”
5/8”
BLU 620005
3/16”
3-7/64”
2-27/32”
2”
3/8”
3/4”
BLU 620055
7/32”
3-11/32”
3-7/64”
2-5/16”
7/16”
25/32”
BLU 620063
1/4”
3-1/2”
3-17/64”
2-17/32”
1/2”
BLU 620007
9/32”
3-45/64”
3-27/64”
2-3/4”
9/16”
Part #
Wire
L1
L2
B
D1
T
BLU 610025
3/32”
3-17/64”
1-1/4”
19/32”
3/16”
1/4”
BLU 610003
1/8”
3-17/64”
1-1/2”
19/32”
1/4”
1/4”
BLU 610004
5/32”
3-31/32”
1-25/32”
21/32”
5/16”
19/64”
BLU 610005
3/16”
4-13/32”
2”
23/32”
3/8”
23/64”
BLU 610055
7/32”
5-1/2”
2-17/32”
1-1/64”
7/16”
7/16”
BLU 610063
1/4”
5-7/16”
2-33/64”
1-5/64”
1/2”
1/2”
25/32”
BLU 610007
9/32”
5-11/16”
2-25/32”
1-9/64”
9/16”
9/16”
27/32”
BLU 610008
5/16”
7-1/4”
3-17/64”
1-11/32”
5/8”
5/8”
BLU 610095
3/8”
8-3/16”
3-1/2”
1-25/64”
3/4”
45/64”
BLU 620008
5/16”
4-9/16”
4-1/4”
3-17/64”
5/8”
1-3/64”
BLU 620095
3/8”
5-5/64”
4-11/16”
3-1/2”
3/4”
1-5/64”
Blue Wave “T” Terminal Back Plates
616103
616105
616107
Highly polished AISI 316 stainless steel
construction.
Blue Wave Terminal Cups
Highly polished AISI 316 stainless
steel construction.
616110
Part #
Wire
L3
D1
D2
BLU 626204
1/8”-5/32”
7/16”
1-1/64”
11/32”
BLU 626205
3/16”
7/16”
1-1/64”
7/16”
Part #
BLU 626207
7/32”-9/32”
25/64”
1-1/64”
5/8”
BLU 616103
BLU 626212
5/16”-3/8”
15/32”
1-11/32”
25/32”
BLU 616105
BLU 616107
BLU 616110
Wire
L1
L2
B
D
3/32”-1/8”
1-31/32”
1/2”
19/32”
9/32”
5/32”-3/16”
3-15/32”
1”
1”
3/8”
1/4”-9/32”
4-27/32”
1-23/64”
1-1/2”
19/32”
5/16”-3/8”
5-15/16”
1-39/64”
1-1/2”
3/4”
257
Blue Wave - Rigging
Blue Wave Turnbuckle Bodies
Blue Wave Chromed Bronze Bodies
Highly polished AISI 316 stainless steel
construction.
Chromed bronze open body prevents
the threads from seizing.
Part #
G UNF
L1
D
Break Load
BLU 011206A
1/4”
3-5/8”
25/64”
2,850 lbs
BLU 011208A
5/16”
4-13/32”
17/32”
5,150 lbs
BLU 011210A
3/8”
4-29/32”
11/16”
7,700 lbs
BLU 011211A
7/16”
4-29/32”
11/16”
7,700 lbs
BLU 011212A
1/2”
5-29/32”
27/32”
11,850 lbs
BLU 011216A
5/8”
7-1/2”
1-1/16”
17,600 lbs
BLU 011220A
3/4”
8-21/32”
1-5/16”
28,600 lbs
Part #
M
L1
mm
D
mm
BLU 011205
M5
80
8
800 Kg
BLU 011206
M6
92
10
1,300 Kg
Part #
G UNF
L1
D
Break Load
BLU 011306A
1/4”
3-15/16”
11/32”
2,850 lbs
BLU 011308A
5/16”
4-23/32”
7/16”
5,150 lbs
BLU 011310A
3/8”
5-5/16”
1/2”
7,700 lbs
BLU 011311A
7/16”
5-29/32”
19/32”
10,300 lbs
BLU 011312A
1/2”
6-11/16”
11/16”
11,850 lbs
BLU 011316A
5/8”
8-1/4”
13/16”
17,600 lbs
BLU 011320A
3/4”
9-27/32”
1”
28,600 lbs
Break Load
BLU 011208
M8
112
13.5
2,350 Kg
BLU 011210
M10
120
17.2
3,500 Kg
Blue Wave Threaded Fork Toggle Ends
Highly polished AISI 316 stainless steel construction.
▪▪Drilled for split pin
Part # Right
Part# Left
G UNF
A
Pin
B
L1
L2
L4
Break Load
5/16”
1/4”
35/64”
3-17/64”
1-27/32”
4-3/64”
2,865 lbs
BLU 033306AB
BLU 023308AB
BLU 033308AB
5/16”
25/64”
5/16”
1/2”
4-1/8”
2-1/4”
13/16”
5,180 lbs
BLU 023310AB
BLU 033310AB
3/8”
15/32”
3/8”
43/64”
4-61/64”
2-31/64”
1-1/64”
7,715 lbs
BLU 023311AXB
BLU 033311AXB
7/16”
25/64”
15/64”
1-3/64”
5-37/64”
2-3/4”
1-3/32”
10,360 lbs
BLU 023312AXB
BLU 033312AXB
1/2”
33/64”
33/64”
1-3/64”
5-25/32”
3-5/32”
1-3/8”
11,900 lbs
BLU 023316AXB
BLU 033316AXB
5/8”
19/32”
25/32”
1-11/64”
7-53/64”
3-15/16”
1-5/8”
17,630 lbs
BLU 033320AXB
3/4”
15/16”
3/8”
1-9/16”
8-27/32”
4-23/32”
1-25/32”
28,600 lbs
-
Blue Wave Threaded Fork Toggle Ends - Metric
Highly polished AISI 316 stainless steel construction.
G
A
mm
Pin
mm
B
mm
L1
mm
L2
mm
L4
mm
Break Load
BLU 033206M
M6
8.0
6.35
14
88
47
12.8
1,300 Kg
BLU 033208M
M8
10.0
8
18
105
57
16
2,350 Kg
BLU 033212XM
M12
18.0
12.7
30
147
80
24.7
5,400 Kg
Part # Left
Rigging Hardware
BLU 023306AB
1/4”
258
Blue Wave - Rigging
Blue Wave Welded Thread Forks
Highly polished AISI 316 stainless steel construction.
G UNF
A
Pin
L1
L2
L4
Break Load
BLU 021206AB
Part # Right
BLU 031206AB
1/4”
3/8”
1/4”
2-11/16”
1/2”
33/64”
2,850 lbs
BLU 021208AB
BLU 031208AB
5/16”
7/16”
5/16”
3-1/16”
19/32”
19/32”
5,150 lbs
BLU 021210AB
BLU 031210AB
3/8”
15/32”
3/8”
3-11/16”
3/4”
3/4”
7,700 lbs
BLU 021211AB
BLU 031211AB
7/16”
15/32”
7/16”
4-3/32”
29/32”
29/32”
10,300 lbs
BLU 021212AB
BLU 031212AB
1/2”
9/16”
1/2”
4-11/16”
31/32”
63/64”
11,850 lbs
BLU 021216AB
BLU 031216AXB
5/8”
23/32”
35/64”
5-5/16”
1-1/4”
1-19/64”
16,720 lbs
BLU 031220AB
3/4”
15/16”
3/4”
7-1/2”
1-1/2”
1-57/64”
28,600 lbs
-
Part # Left
Part # Right
Part # Left
M
A
mm
D
mm
L1
mm
L2
mm
L4
mm
Break Load
BLU 021206B
BLU 031206B
M6
7.5
5
67
12
10
1,000 Kg
BLU 021208B
BLU 031208B
M8
10
6
79
13
10
1,300 Kg
BLU 021208XB
BLU 031208XB
M8
11
8.1
82
15
11
2,350 Kg
BLU 021210XB
BLU 031210XB
M10
12
9.5
94
19
14.2
5,100 Kg
M14
14
14
137
33
26
5,900 Kg
M16
18
16
151
33
25
8,000 Kg
D2
L1
B
Break Load
BLU 021214XB
-
BLU 031216XB
Blue Wave Threaded Eye Ends
Highly polished AISI 316 stainless steel construction.
▪▪Left hand is drilled for split pin
Rigging Hardware
Part # Right
Left w/Cross Hole
M
BLU 021906A
BLU 033906A
-
1/4”
1/4”
9/16”
2-9/16”
5/32”
2,850 lbs
BLU 021908A
BLU 033908A
-
5/16”
5/16”
21/32”
3-1/16”
3/16”
5,150 lbs
BLU 021910A
BLU 033910A
-
3/8”
3/8”
7/8”
3-1/2”
15/64”
7,700 lbs
BLU 021911AX
BLU 033911AX
-
7/16”
7/16”
15/16”
3-27/32”
5/16”
10,300 lbs
BLU 021912AX
BLU 033912AX
-
1/2”
1/2”
1-7/64”
4-1/8”
25/64”
11,850 lbs
M14
-
13mm
28mm
124mm
9mm
5,900 kg
BLU 021914
-
G UNF
D1
-
BLU 033916AX
-
5/8”
5/8”
1-13/32”
5-9/13”
15/32”
17,600 lbs
-
BLU 033920AX
-
3/4”
3/4”
1-9/16”
6-1/2”
5/8”
28,600 lbs
Blue Wave Toggles
Highly polished AISI 316 stainless steel construction.
A
B
D1
D2
L
Break Load
BLU 140506
Part #
17/64”
15/32”
3/16”
3/16”
63/64”
2,860 lbs
BLU 140608
5/16”
33/64”
1/4”
1/4”
1-1/16”
3,960 lbs
BLU 140810
3/8”
19/32”
5/16”
5/16”
1-1/4”
5,720 lbs
BLU 141011
1/2”
3/4”
3/8”
3/8”
1-15/32”
7,700 lbs
BLU 141111
17/32”
29/32”
15/32”
15/32”
1-3/4”
10,560 lbs
BLU 141214
33/64”
63/64”
1/2”
1/2”
1-7/8”
12,760 lbs
BLU 141616
13/16”
1-3/16”
33/64”
33/64”
2-15/16”
16,500 lbs
259
Blue Wave - Rigging
Blue Wave Strap Toggles
Highly polished AISI 316 stainless steel construction.
Part #
BLU 140006
L
A
B
D
Break Load
1-3/32”
19/64”
17/64”
15/64”
3,900 lbs
BLU 140008
11/32”
11/32”
19/64”
5/16”
7,900 lbs
BLU 140010
49/64”
27/64”
3/8”
3/8”
8,800 lbs
BLU 140011
31/32”
29/64”
27/64”
7/16”
10,500 lbs
BLU 140012
1-31/32”
17/32”
15/32”
15/32”
12,700 lbs
BLU 140016
2-5/32”
11/16”
19/32”
5/8”
17,600 lbs
Blue Wave Double Jaw Toggles
Highly polished AISI 316 stainless steel construction.
Part #
L1
L2
L3
L4
D1
D2
BLU 250008
25/64”
45/64”
13/64”
1-3/16”
5/16”
5/16”
BLU 250010
15/32”
15/16”
1/4”
1-1/2”
3/8”
3/8”
BLU 250011
19/32”
1-3/16”
23/64”
1-21/32”
7/16”
7/16”
BLU 250012
45/64”
1-3/16”
7/16”
1-7/8”
1/2”
1/2”
BLU 250016
25/32”
1-3/8”
17/32”
2-1/4”
5/8”
5/8”
BLU 250019
15/16”
1-9/16”
11/16”
2-15/32”
3/4”
3/4”
Blue Wave Split Rings
Blue Wave Turnbuckle Lock Nuts
Highly polished AISI 316 stainless steel construction.
Highly polished AISI 316 stainless steel construction.
Dim
D
BLU 070601
Part #
1/32”
7/16”
Part # Right
BLU 070602
3/64”
19/32”
BLU 043004
BLU 070603
1/16”
3/4”
BLU 041205
BLU 070604
5/64”
29/32”
BLU 043006
Highly polished AISI 316 stainless steel construction.
Part #
L
D
BLU 061605
5/8”
13/64”
BLU 061863
23/32”
1/4”
BLU 061806
17mm
6mm
BLU 062008
25/32”
5/16”
BLU 062395
29/32”
3/8”
BLU 062611
1”
7/16”
BLU 062812
25mm
12mm
BLU 051206
BLU 041206A
BLU 051206A
-
BLU 041208
BLU 051208
BLU 041208A
BLU 051208A
BLU 043010
-
-
M4
-
M5
BLU 051205
BLU 041206
BLU 043008
Standard
Nut
UNF
-
-
-
M6
-
M6
-
1/4”
-
-
-
-
M8
-
M8
-
5/16”
-
-
-
-
M10
BLU 041210
BLU 051210
-
M10
-
BLU 041210A
BLU 051210A
3/8”
-
-
BLU 041211A
BLU 051211A
7/16”
-
-
-
-
M12
BLU 043012
-
BLU 041212
-
BLU 041212A
-
BLU 051212A
BLU 051214
BLU 051216
-
M12
-
1/2”
-
-
-
M14
-
-
M16
-
BLU 041216A
BLU 051216A
5/8”
-
-
BLU 041220A
BLU 051220A
3/4
-
-
Rigging Hardware
Blue Wave Clevis Pins
Metric
Part # Left
260
Blue Wave - Rigging
Blue Wave Thimbles
Blue Wave Sailmaker “D” Shackles
High polished AISI 316 stainless steel construction.
High polished AISI 316 stainless steel
construction. Screw pin style.
D
A
L
Break Load
Wire Size
A2
L1
L2
BLU 160041
Part #
5/32”
3/8”
19/32”
1,100 lbs
BLU 110002
3/32”
3/8”
29/32”
21/32”
BLU 160051
3/16”
7/16”
11/16”
2,200 lbs
BLU 110003
1/8”
3/8”
1”
11/16”
BLU 160052
3/16”
5/8”
15/16”
2,200 lbs
BLU 110004
5/32”
7/16”
1-3/32”
25/32”
BLU 160053
3/16”
5/8”
1-13/32”
2,400 lbs
BLU 110005
3/16”
1/2”
1-1/4”
13/16”
BLU 165206
1/4”
5/8”
29/32”
3,000 lbs
BLU 110006
1/4”
19/32”
1-19/32”
1-1/16”
BLU 110007
9/32”
3/4”
1-25/32”
1-9/32”
BLU 110008
5/16”
7/8”
2”
1-1/2”
BLU 110009
3/8”
15/16”
2-9/32”
1-19/32”
BLU 110010
7/16”
1-11/16”
2-9/16”
1-7/8”
BLU 110012
1/2”
1-1/8”
2-3/4”
2-1/8”
BLU 110014
9/16”
1-1/4”
3-7/64”
2-1/4”
BLU 110016
5/8”
1-9/16”
3-17/32”
2-5/8”
BLU 110018
11/16”
1-3/4”
4”
2-31/32”
BLU 110020
3/4”
2”
4-17/32”
3-5/16”
5-5/16”
Part #
BLU 110026
1”
3”
6-7/8”
Blue Wave “D” Shackles
High polished AISI 316 stainless
steel construction.
Blue Wave Key Pin Shackles
High polished AISI 316 stainless steel
construction.
Part #
D
A
L
Break Load
BLU 180005
3/16”
9/32”
1-13/32”
2,200 lbs
BLU 185205
3/16”
1/2”
1”
2,200 lbs
BLU 180006
1/4”
9/32”
1-9/16”
3,650 lbs
BLU 180008
5/16”
25/32”
1-19/32”
6,000 lbs
Blue Wave Halyard Shackles
Rigging Hardware
High polished AISI 316 stainless steel
construction.
▪▪Keyed pin
Part #
D
A
L
Break Load
1,100 lbs
BLU 150041
5/32”
3/8”
19/32”
BLU 150051
3/16”
7/16”
11/16”
2,200 lbs
BLU 150052
3/16”
5/8”
15/16”
2,200 lbs
Part #
D1
A
L1
L2
Break Load
3/16”
7/16”
9/16”
11/32”
1,500 lbs
BLU 150053
3/16”
5/8”
1-13/32”
2,400 lbs
BLU 180352
BLU 155251
3/16”
17/32”
1”
2,400 lbs
BLU 180305
3/16”
19/32”
13/16”
7/16”
1,500 lbs
1/4”
9/16”
1”
7/16”
3,300 lbs
5/16”
3/4”
1”
7/16”
4,350 lbs
BLU 155206
1/4”
5/8”
29/32”
3,000 lbs
BLU 180306
BLU 150062
1/4”
9/16”
1-9/16”
4,350 lbs
BLU 180308
BLU 150082
5/16”
11/16”
1-21/32”
6,600 lbs
Blue Wave Bow Shackles
High polished AISI 316 stainless
steel construction.
Part #
D
A
L
Break Load
BLU 150061
1/4”
9/16”
29/32”
4,350 lbs
BLU 150081
5/16”
11/16”
1-7/32”
6,600 lbs
BLU 150012
3/8”
1”
2”
15,400 lbs
261
Blue Wave - Rigging
Blue Wave Twisted Shackles
Blue Wave Eye Straps
High polished AISI 316 stainless steel
construction.
High polished AISI 316 stainless steel
construction.
Part #
BLU 170005
Part #
D
D
A
L
Break Load
3/16”
7/16”
7/8”
2,600 lbs
BLU 150401
5/32”
13/64”
A1
A2
L
1-5/16”
7/16”
15/32”
1-11/32”
19/32”
9/16”
BLU 170053
3/16”
7/16”
1-9/32”
2,600 lbs
BLU 155102
BLU 170006
1/4”
9/16”
1-13/32”
4,350 lbs
BLU 155203
7/32”
1-23/32”
13/16”
3/4”
BLU 155304
7/32”
2-15/32”
1-3/32”
1-3/32”
BLU 156205
1/4”
2-21/32”
1-1/4”
1-9/32”
Blue Wave Forged Eye Bolts
Highly polished AISI 316 stainless steel construction.
G
L1
L2
B1
D
Break
BLU 310630
Part #
M6
2-3/32”
1-3/16”
1”
1/4”
2,800 lbs
BLU 310660
M6
3-9/32”
2-3/8”
1”
1/4”
2,800 lbs
BLU 310835
M8
2-9/16”
1-3/8”
1”
5/16”
5,250 lbs
BLU 310880
M8
4-11/32”
3-5/32”
1”
5/16”
5,250 lbs
BLU 311050
M10
3-7/16”
1-31/32”
1-3/16”
3/8”
7,700 lbs
BLU 311000
M10
5-3/8”
3-15/16”
1-3/16”
3/8”
7,700 lbs
Blue Wave Welded Eye Bolts
Highly polished AISI 316 stainless steel construction.
G
L1
L2
B
D
Break
BLU 370630
M6
2-1/4”
1-3/16”
1”
1/2”
2,800 lbs
BLU 370650
M6
3”
1-31/32”
1”
1/2”
2,800 lbs
BLU 370660
M6
3-7/16”
2-3/8”
1”
1/2”
2,800 lbs
BLU 370600
M6
4-31/32”
3-15/16”
1”
1/2”
2,800 lbs
BLU 370835
M8
2-19/32”
1-3/8”
1”
19/32”
5,250 lbs
BLU 370850
M8
3-5/32”
1-31/32”
1”
19/32”
5,250 lbs
BLU 370880
M8
4-11/32”
3-5/32”
1”
19/32”
5,250 lbs
BLU 371050
M10
3-11/32”
1-31/32”
1-3/16”
5/8”
7,700 lbs
BLU 371000
M10
5-5/16”
3-15/16”
1-3/16”
5/8”
7,700 lbs
BLU 371210
M12
5-1/2”
1-15/16”
1-3/16”
45/64”
9,900 lbs
BLU 371216
M12
7-7/8”
6-5/16”
1-3/16”
45/64”
9,900 lbs
Rigging Hardware
Part #
262
Blue Wave - Rigging
Blue Wave Eye Bolts w/Ring
Highly polished AISI 316 stainless steel construction.
G
L1
mm
L2
mm
L3
mm
B1
mm
B2
mm
D1
mm
D2
mm
Break Load
BLU 380630
M6
47
46
30
25
5
13
30
950 kg
BLU 380660
M6
87
76
60
25
5
13
30
950 Kg
BLU 380835
M6
66
53
35
25
6
15
40
1,500 Kg
BLU 380880
M8
111
98
80
25
6
15
40
1,500 Kg
BLU 381050
M10
85
70
50
30
7
16
45
2,200 Kg
BLU 381000
M10
135
120
100
30
7
16
45
2,200 Kg
BLU 381210
M12
140
124
100
30
10
18
50
3,300 Kg
BLU 381216
M12
200
184
160
30
10
18
50
3,300 kg
Part #
Blue Wave “U” Bolts
Highly polished AISI 316 stainless steel construction.
Part #
Rigging Hardware
G
L1
L2
L3
L4
B
D
Break
BLU 340435
M4
2-19/32”
1-3/8”
1”
1-3/16”
1”
5/32”
1,600 lbs
BLU 340515
M5
1-47/64”
11/16”
1”
1/2”
1”
11/64”
1,950 lbs
BLU 340535
M5
2-21/32”
1-3/8”
1”
1-3/16”
1”
11/64”
1,950 lbs
BLU 340635
M6
2-21/32”
1-3/8”
1”
1-3/16”
1-1/16”
13/64”
2,700 lbs
BLU 340650
M6
3-5/16”
1-31/32”
1”
1-3/16”
1-1/16”
13/64”
2,700 lbs
BLU 340835
M8
2-13/16”
1-3/8”
1”
1-3/16”
1”
9/32”
3,800 lbs
BLU 348850
M8
3-17/32”
1-3/32”
1-3/16”
1-1/4”
1-21/32”
5/16”
3,800 lbs
BLU 340850
M8
3-3/8”
1-31/32”
1”
1-3/16”
1”
9/32”
3,800 lbs
BLU 340880
M8
4-9/16”
3-5/32”
1”
1-25/32”
1”
9/32”
3,800 lbs
BLU 341045
M10
2-23/32”
1-25/32”
1-9/16”
1-9/16”
1-3/16”
25/64”
7,700 lbs
BLU 341010
M10
5-29/32”
3-15/16”
1-9/16”
3-11/32”
1-3/16”
25/64”
7,700 lbs
BLU 341060
M10
4-11/32”
2-3/8”
1-9/16”
1-3/8”
1-3/16”
25/64”
7,700 lbs
BLU 341280
M12
4-15/16”
3-5/32”
1-3/16”
3-11/32”
1-3/8”
27/64”
11,200 lbs
Blue Wave “V” Bolts
Highly polished AISI 316 stainless steel construction.
G
L1
mm
L2
mm
L3
mm
L4
mm
A
mm
B
mm
D
mm
Break Load
BLU 408500
M8
100
50
40
45
0
33
8
3,500 Kg
BLU 408508
M8
100
50
40
45
8
33
8
3,500 Kg
BLU 408518
M8
100
50
40
45
18
33
8
3,500 Kg
BLU 410600
M10
120
60
48
55
0
40
10
5,100 Kg
BLU 410608
M10
120
60
48
55
8
40
10
5,100 Kg
BLU 410618
M10
120
60
48
55
18
40
10
5,100 Kg
Part #
263
Blue Wave - Architectural
Blue Wave Stoppers
Highly polished AISI 316 stainless steel construction.
Wire
mm
G
L
mm
L1
mm
L2
mm
B
mm
Slip load
BLU A650004
4 / 5/32”
M3
15
4
3
10
100 kg
BLU A650005
5 / 3/16”
M3
20
5
4
10
100 kg
BLU A650006
6 / 1/4”
M3
20
6
5
10
100 kg
BLU A650008
8 / 5/16”
M4
23
8
7
12
150 kg
Part #
Blue Wave Net Clips
Blue Wave WDS Stop Ball
Highly polished AISI 316 stainless steel construction.
Used when crossed wires need connection.
Highly polished AISI 303 stainless steel construction.
Part #
Wire
G
L
L1
L2
L3
D1
BLU A600003O
3 / 1/8”
M10
19
5
8
3.2
17
BLU A600005O
5 / 3/16”
M12
23
5
10
5.2
20
BLU A600006O
6 / 1/4”
M12
36
6
14
8.3
24
Part #
BLU A240503
Wire
D
L
G
3 / 1/8”
15
12
M5
Blue Wave WDS Through Going Ball
Highly polished AISI 303 stainless steel construction.
Part #
BLU A250503
Highly polished AISI 303 stainless steel construction.
Stopper slides over wire and attaches with an Allen key.
Part #
Wire
G
D
D1
3 / 1/8”
M4
15
3.5
Wire
D
G
BLU A260003
3 / 1/8”
15
M5
BLU A260004
4 / 5/32”
M5
20
4.5
BLU A260005
5 / 3/16”
M5
20
5.5
Rigging Hardware
Blue Wave Ball Stoppers
264
Blue Wave - Architectural
Blue Wave Domehead Terminals
Highly polished AISI 316 stainless steel construction.
Part #
Wire Dia.
L1
L2
L3
A
A1
A2
BLU A100003
1/8”
35
25
32
3.5
5.5
8
BLU A100005
3/16”
41
30
37
5.3
7.5
12
Blue Wave Stop End Nuts
Highly polished AISI 316 stainless steel construction.
Part #
D1
D2
L1
L2
G
BLU A160503
8
12
33
30
M5
BLU A160604
8
12
39
35
M6
BLU A160806
10
14
45
40
M8
Blue Wave Thread Terminals - Small
Highly polished AISI 316 stainless steel construction.
Part # Right
Part # Left
G Metre
Wire
L1
L2
L3
D
A
BLU A180503
-
M5
3 / 1/8”
60
25
30
5.5
3.5
BLU A180604
BLU A190604
M6
4 / 5/32”
65
25
35
6.35
4.4
BLU A180605
BLU A190605
M6
5 / 3/16”
73
30
35
7.5
5.3
BLU A181008
-
M10
8 / 5/16”
103
50
45
12.58
8.4
Blue Wave Thread Pins
AISI 316 stainless steel construction.
Rigging Hardware
Part #
Length
G
BLU A400503
38
M5
BLU A400604
45
M6
Blue Wave Dual Thread Screws
AISI 304 stainless steel construction.
▪▪Right handed
L
L1
L2
Ø
G
BLU A410503
Part #
70
30
24
5
M5
BLU A410806
90
40
40
8
M8
265
Blue Wave - Architectural
When planning a wire construction the ultimate break load, as
well as the work load, must be calculated, as it will determine the
minimum wire size and maybe the wire construction needed.
Blue Wave’s fitting’, unless otherwise stated, are constructed after
termination to meet 90% of the break load on the wire ropes that
are standard in the market. PLEASE NOTE: In order to guarantee
safety in a wire construction you should calculate a safety factor
of 2-3 on static constructions and a minimum of 4 on dynamic
constructions. As a general rule working loads should never
exceed 25% of the break loads stated.
Blue Wave Swage Fork - Welded
Highly polished AISI 316 stainless steel
construction.
Part #
BLU A360503
Wire
L1
L2
L3
D1
D2
D3
A
1/8”
50
25
12
5
5.5
3.5
7.5
Blue Wave Bodies
Highly polished AISI 316 stainless steel construction.
Part #
G
L1
D1
BLU A011205
M5
60
8
BLU A011206
M6
65
10
BLU A011208
M8
80
14
WDS Break Loads
Wire
mm
Thread
Metric
Break load
kg
2,0
M4
500
2,0
M5
800
2,5
M5
800
3,0
M6
1250
4,0
M8
1300
5,0
M10
2600
6,0
M12
5100
7,0
M14
5900
8,0
M16
8000
10,0
M20
13000
12,0
M20
13000
14,0
M22
17000
16,0
M24
20000
19,0
M27
25500
22,0
M30
31000
26,0
M36
43000
A Full Range Of
BLUE WAVE
Blue Wave Threaded Fork - Welded
Part #
BLU A330503
Wire
G
L1
L2
L3
D1
A
1/8”
M5
49
30
12
5
7.5
Available On Request
Rigging Hardware
Architectural Products Are
Highly polished AISI 316 stainless steel construction.
Welded forks with thread and pin for rigging screws.
▪▪Left handed
DIY Lifeline
Fittings
Full Line of Hand Crimp, Machine
Swage and DIY Cordage Fittings
Unique
Accessories
WE KEEP YOU
CONNECTED!
Rigging
Hardware
Calibrated Turnbuckle
Grab ‘n Go™
Hook
Inner Forestay
Lever
Folding
Pad Eyes
Wrap Pins
“Captain Hook”
Chain Snubber
(chain not included)
Splice Line
Fittings
C. SHERMAN JOHNSON CO., INC. • East Haddam, CT 06423 USA
Te l 8 6 0 . 8 7 3 . 8 6 9 7 • F a x : 8 6 0 . 8 7 3 . 8 5 8 9 • E m a i l : i n f o @ c s j o h n s o n . c o m
w w w. c s j o h n s o n . c o m
267
Johnson - Lifeline Hardware
Johnson Mini Snap Gate Hook - “Over Center”
Not for lifting, hanging or
other high load applications
Johnson Life Line Fittings
Mini Snap Gate Hook features the same “Over-Center” design as
larger snap gate hoods. This feature allows
easy opening and closing with no load on
the swinging hook when closed. Ideal for
lower lifelines and powerboats.
▪▪2-3/4” grip length, 3” overall
▪▪Investment cast T-316 stainless
Part #
Wire
Description
Adjustment
Machine Swage
Hand Crimp
These fittings were designed for easy installation by
the boat owner or professional. A properly installed hand crimp
fitting will hold 65-70% of the breaking strength of 7x7 cable. The
proper crimping tool and instructions must be used to assure a safe
installation.
Machine Swage
The ultimate in strength, durability, and aesthetics, giving you
complete peace of mind. Lifelines are generally swaged by way
of a rotating set of cold forming dies or a hydraulic press with a
minimum 40 tons of pressure. Standard duty lifeline fittings match
the strength of 7x7 coated or uncoated cable. 1x19 uncoated cable
may also be used to meet the latest offshore rules.
JDH 21-784
1/8” wire
1/4-28 L.H.
1” adj.
JDH 21-786
3/16” wire
1/4-28 L.H.
1” adj.
Hand Crimp
JDH 26-784
1/8” wire
1/4-28 L.H.
1” adj.
JDH 27-786
3/16” wire
1/4-28 L.H.
1” adj.
Johnson Tubular Gate Hooks
Inexpensive, slender tubular design with a stamped hook.
Part #
Wire
Description
Adjustment
Machine Swage
JHD 21-304
1/8”
JHD 21-306
3/16”
1/4-28 L.H.
1-1/2”
1/4-28 L.H.
1-1/2”
Hand Crimp
Johnson Snap Gate Hooks
Snap Gate Hook - “Over Centre” features the “over centre” design
with no load on the swinging hook when closed. This allows easy
opening yet stays secure with a heavy welded split ring on the
plunger latching device.
▪▪T-316 stainless steel
Part #
Wire
Description
Adjustment
Machine Swage
1/8”
JHD 21-886
3/16”
1/4-28 L.H.
1-1/4”
5/16-24 L.H.
1-1/4”
Hand Swage
JHD 26-884
1/8”
1/4-28 L.H.
1-1/4”
JHD 27-886
3/16”
5/16-24 L.H.
1-1/4”
Snap Gate Hook - Body Only
Part#
1/4-28 L.H.
1-1/2”
JHD 27-403
3/16”
1/4-28 L.H.
1-1/2”
Johnson Wrap Pins
Wrap Pins are neat Velcro locking
devices used to secure turnbuckles
without messing with unruly cotter
pins. Just make your adjustment,
push the cotter attached to the Velcro through the hole and wrap
the Velcro strip around the turnbuckle body. Works on open
body turnbuckles and Johnson’s positive locking, slotted tubular
turnbuckles. Three sizes work on 1/4”-1/2” threaded turnbuckles.
Order by thread diameter.
JHD WRAPC2
JHD WRAPC3
JHD WRAPC4
1/4", 2/pkg
5/16" & 3/8", 2/pkg
7/16" & 1/2", 2/pkg
Description
JHD 21-80
5/16”-24 L.H.
JHD 21-80-1
5/16”-24 R.H.
JHD 21-81
1/8”
1/4”-28 L.H.
Johnson
Open Body Turnbuckles - Jaw to Swage
Classic, traditional design. Chromed, forged silicon
bronze body with T-316 stainless ends.
Johnson Snap Gate Repair Kit
Repair kit for lost or worn latching mechanisms.
JHD 21-850
Part #
Wire
Description
Adjustment
Machine Swage
JHD 42-314
1/8”
1/4” Pin
3”
JHD 42-316
3/16”
1/4” Pin
3”
Rigging Hardware
JHD 21-884
JHD 26-403
268
Johnson - Lifeline Hardware
Johnson Tubular Turnbuckles - Jaw to Swage
Johnson Interlocking Gate Eyes - Swivel
Check nut locking, T-316 stainless.
An interlocking gate eye is used at the opposite end
of the gate as a “hinge” for the gate.
▪▪T-316 stainless steel
Machine Swage
Part #
Wire
Description
Adjustment
JHD 22-312
JHD 22-314
Hand Crimp
Machine Swage
JHD 19-314
1/8”
1/4” Pin
3”
JHD 19-316
3/16”
1/4” Pin
3”
Hand Crimp
JHD 26-412
1/8”
1/4” Pin
3”
JHD 27-412
3/16”
1/4” Pin
3”
1/8” Wire
3/16” Wire
JHD 26-410
JHD 27-410
1/8” Wire
3/16” Wire
Johnson Interlocking Gate Eyes - Threaded
Same as above only the terminal is threaded into the eye nut.
Johnson
Tubular Turnbuckles - Hand Crimp
▪▪T-316 stainless steel
Machine Swage
Eye to hand crimp with check nut locking. Used where an
eye is required for attachment instead of a jaw.
▪▪T-316 stainless steel
Part #
Wire
Adjustable
JHD 26-401
1/8”
3”
JHD 27-401
3/16”
3”
Johnson Single Gate Eyes - Swivel
A single eye is used on one end of the gate area to
attach the gate.
▪▪T-316 stainless steel
Machine Swage
JHD 22-311
JHD 22-313
1/8” Wire
3/16” Wire
Rigging Hardware
1/8” Wire
3/16” Wire
Johnson Single Gate Eyes - Threaded
Same as above only the terminal is threaded into the eye nut.
▪▪T-316 stainless steel
Machine Swage
JHD 22-301
JHD 22-303
Hand Crimp
JHD 26-407
JHD 27-407
1/8” Wire
3/16” Wire
Hand Crimp
JHD 26-408
JHD 27-408
1/8” Wire
3/16” Wire
Johnson Toggle Jaws - “T” Style
Generally used at the stern rail when no gate is
required with a turnbuckle forward.
▪▪T-316 stainless steel
Part #
Wire
Description
Machine Swage
JHD 25-314
1/8”
1/4” Pin
JHD 25-316
3/16”
1/4” Pin
Hand Crimp
Hand Crimp
JHD 26-409
JHD 27-409
JHD 22-302
JHD 22-304
1/8” Wire
3/16” Wire
JHD 27-415
Techno Tip
One of the most neglected parts on a sailboat are the Life Line and
Rigging Turnbuckles. Turnbuckles need to be kept free of dirt and
salt by rinsing with fresh water periodically. A good marine lubricant
like Johnson Sealube or equivalent should be applied to the
threads. The lubricant will provide corrosion protection and keep the
turnbuckles turning freely. Never straighten a bent threaded stud,
always replace it. A bent stud is considerably weakened.
1/4” Pin
Johnson Toggle Jaws - Old Style
Generally used at the stern rail when no gate
is required with a turnbuckle forward.
Uses a toggle nut instead of a “T” bolt.
▪▪T-316 stainless steel
Part #
Wire
Description
Machine Swage
JHD 25-304
1/8” Wire
3/16” Wire
3/16”
JHD 25-306
1/8”
1/4” Pin
3/16”
1/4” Pin
Hand Crimp
JHD 26-405
1/8”
1/4” Pin
JHD 27-405
1/8”
1/4” Pin
269
Johnson - Lifeline Hardware
Johnson Stanchion Terminals
Johnson Turnbuckle Bodies
Used to terminate cable at stanchion.
▪▪T-316 stainless steel
▪▪Use for lifeline or rigging applications
▪▪Chromed silicon bronze
JHD 25-306-5F
JHD 100-110-1
3/16” Wire (a)
1/8” Wire (b)
Part #
Johnson Adjusters - Short
Generally used at the stern rail in conjuncture with a single
gate eye to tension that section of
the gate.
▪▪T-316 stainless steel
Part #
Wire
Description
Thread Size
Style
JHD 34-601
10-32
Tubular
JHD 34-602
1/4-28
Tubular
JHD 34-602S
1/4-28
Shortie
JHD 34-603
5/16-24
Tubular
JHD 34-610
1/4-24
Open Body
JHD 34-611
5/16-24
Open Body
JHD 34-612
3/8-24
Open Body
Adjustment
Machine Swage
JHD 24-303
3/16”
JHD 26-406
1/8”
1/4” Pin
1”
JHD 27-406
3/16”
1/4” Pin
1”
1/4” Pin
1”
Hand Crimp
Johnson Studs for Hand Crimping
Life line replacement parts.
▪▪T-316 stainless steel
Part #
Thread Size
Wire Size
Hand Crimp
Johnson Adjuster Turnbuckle - Jaw to Swage
JHD 31-601
1/4-28 L.H. x 3/8”
1/8”
Stamped, strap design turnbuckle with knurled nut for adjustment.
T-316 stainless/bronze construction.
JHD 31-602
1/4-28 L.H. x 1-1/2”
1/8”
JHD 31-603
1/4-28 L.H. x 2-1/2”
1/8”
JHD 31-603-1
1/4-28 R.H. x 2-1/2”
1/8”
JHD 31-605
5/16-24 L.H. x 3/8”
3/16”
JHD 31-606
5/16-24 L.H. x 2”
3/16”
Part #
JHD 24-302
Wire
Description
Adjustment
3/16”
1/4” Pin
2-3/4”
Johnson Pulpit Anchor
JHD 29-501
1/2” hole
Johnson Stanchion Eye
5/16-24 R.H. x 2”
3/16”
JHD 31-607
1/4-28 L.H. x 2-1/2”
3/16”
JHD 31-607-1
1/4-28 R.H. x 2-1/2”
3/16”
JHD 31-608
1/4-28 L.H. x 2-1/2”
3/16”
Johnson Studs for Machine Swaging
Life line replacement parts.
▪▪T-316 stainless steel
Part #
JHD 30-601
Thread Size
Wire Size
1/4-28 L.H. x 3/8”
1/8”
This fitting is used on a stanchion for adding
lower lifelines without the need to drill holes for
the cable to pass through.
▪▪T-316 stainless steel
JHD 30-602-1
1/4-28 R.H. x 1-1/2”
1/8”
JHD 30-603
1/4-28 L.H. x 2-1/2”
1/8”
JHD 30-603-1
1/4-28 R.H. x 2-1/2”
1/8”
JHD 29-502
JHD 30-604
10-32 R.H. x 3”
1/8”
JHD 30-604-1
10-32 L.H. x 1-7/8”
1/8”
JHD 30-605
1/4-28 L.H. x 2-1/2”
1/8”
JHD 30-621
1/4-28 L.H. x 2-1/2”
5/32”
JHD 30-621-1
1/4-28 R.H. x 2-1/2”
5/32”
JHD 30-606
5/16-24 L.H. x 3/8”
3/16”
5/16” hole
JHD 30-607
5/16-24 L.H. x 2”
3/16”
JHD 30-607-1
5/16-24 R.H. x 2”
3/16”
JHD 30-608
1/4-28 L.H. x 2-1/2”
3/16”
JHD 30-608-1
1/4-28 R.H. x 2-1/2”
3/16”
JHD 30-610
1/4-28 L.H. x 2-1/2”
3/16”
Rigging Hardware
Can be used on the stern rail and bow
pulpit to terminated jaw fittings for lower
(or upper) lines.
▪▪T-316 stainless steel
JHD 31-606-1
270
Johnson - Lifeline Hardware
Johnson Conversion Sleeves
Johnson Clevis Pins
Allows the use of 3/16” lifeline fittings to be
used with 1/8” cable. Slide over cable first then
into fitting.
▪▪T-316 stainless steel
▪▪ T-316 stainless steel
Dia.
Grip
JHD CP-3-13
3/16”
13/32”
JHD CP-3-17
3/16”
17/32”
JHD CP-3-32
3/16”
1”
JHD CP-3-9
3/16”
9/32”
JHD CP-4-13
1/4”
13/32”
These collars can be used at the gate instead of
interlocking eyes. They maintain tension while gate
is open. A set-screw holds them in place.
▪▪T-316 stainless steel
JHD CP-4-16
1/4”
1/2”
JHD CP-4-20
1/4”
5/8”
JHD CP-4-24
1/4”
3/4”
JHD 29-504
JHD 29-505
JHD 29-506
JHD CP-4-40
1/4”
1-1/4”
JHD CP-5-18
5/16”
9/16”
JHD CP-5-22
5/16”
11/16”
JHD CP-5-44
5/16”
1-3/8”
JHD CP-6-20
3/8”
5/8”
▪▪T-316 stainless steel
▪▪3/16” & 1/4”
JHD CP-6-26
3/8”
13/16”
JHD SP-1Each
JHD SP-1-P10/pkg
JHD CP-6-52
3/8”
1-5/8”
JHD CP-7-28
7/16”
7/8”
JHD CP-7-40
7/16”
1-1/4”
JHD CP-7-52
7/16”
1-5/8”
JHD CP-8-24
1/2”
3/4”
JHD CP-8-32
1/2”
1”
JHD CP-8-40
1/2”
1-3/8”
JHD CP-10-34
5/8”
1-1/16”
JHD CP-10-40
5/8”
1-1/4”
JHD CP-10-48
5/8”
1-1/2”
JHD CP12-48-1
3/4”
1-7/8”
JHD 36-610
JHD 36-611
1/8-3/16” Machine swage
1/8-3/16” Hand crimp
Johnson Gate Stops
1/4” maximum outside dia.
5/16” maximum outside dia.
3/8” maximum outside dia.
Johnson Safety Pins
Johnson Sealube - Turnbuckle Lubricant
Especially formulated for turnbuckles or any high bearing load,
low speed application. Will carry higher bearing loads than any
other lubricant. Provides powerful resistance to
corrosion of the host metal.
JHD 48-540
1 oz
Johnson Circular Pins
Rigging Hardware
▪▪Stainless steel
JHD R-1-P
JHD R-1-100
JHD R-2-P
JHD R-2-1-P
JHD R-2-1-100
JHD R-2-100
JHD R-3-P
JHD R-3-100
JHD R-5-100
JHD R-5-P
For 3/16” pins For 3/16” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 3/16” & 1/4” pins For 1/4” & 3/8” pins For 1/4” & 3/8” pins For 1/2” & 5/8” pins For 1/2” & 5/8” pins
(20 pkg)
(100 pkg)
(Pig tail, 20 pkg)
(20 pkg)
(100 pkg)
(Pig tail, 100 pkg)
(20 pkg)
(100 pkg)
(100 pkg)
(8 pkg)
Part #
271
Johnson - Marine Hardware
Johnson Open Body Turnbuckles - Jaw and Machine Swage
Jaws have a “T” construction. Forged & chromed silicon bronze & T-316 stainless steel.
Type
Wire
Size
Break
Strength
Thread
Size
Adjustment
Pin Dia.
Safe Working
Load
JHD 42-114
“T” toggle
1/8”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
JHD 42-115
“T” toggle
5/32”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
Part #
Johnson Wire End Terminals For
Machine Swaging
Johnson Tubular Turnbuckles
- Classic Jaw and Machine Swage
▪▪T-316 stainless steel
Part #
Jaws have a nut toggle construction.
▪▪T-316 stainless steel
Part #
Upper
Terminal
Wire
Size
Thread
Size
Adjust
Pin
Dia.
SWL
lbs
JHD 04-105
LH
5/32”
1/4-28
3”
1/4”
1,000
JHD 05-105
RH
5/32”
1/4-28
3”
1/4”
1,000
Thread x Length
Wire Size
JHD 32-607
1/4-28 L.H. x 2-1/2”
3/32”
JHD 32-608
1/4-28 L.H. x 2-1/2”
1/8”
JHD 32-611
1/4-28 R.H. x 2-1/2”
1/8”
JHD 32-614
10-32 R.H. x 3”
3/32”
Johnson Open Body Turnbuckles - Jaw and Jaw
▪▪Jaws have “T” toggle construction
▪▪Forged & chromed silicon bronze & T-316 stainless steel
Part #
JHD 42-110
Type
Wire Size
Break
Strength
Thread
Size
Adjustment
Pin Dia.
Safe Working
Load
Jaw/Jaw
to 5/32”
2,500 lbs
1/4-28
3”
1/4”
1,000 lbs
Johnson Stainless Steel Tubular Turnbuckles - Jaw and Jaw
Type
Wire
Size
Break
Strength
JHD 03-110
Jaw/Jaw
to 3/32”
JHD 04-110
Jaw/Jaw
to 5/32”
Part #
Length
Thread
Size
Closed
Open
Pin Dia.
Safe Working
Load
1,000 lbs
10-32
6-3/8”
8-7/8”
13/16”
400 lbs
2,500 lbs
1/4-28
8”
11”
1/4”
1,000 lbs
Johnson Stay Adjuster - Calibrated
Stainless steel fitting. Adjustment is made by turning the knurled nut. The terminal rod is made
captive, therefore it cannot turn and cannot come apart even when fully extended. It produces
a “fool proof” adjuster which cannot come apart either by an inexperienced crew or during the
vibration of trailering on the road.
Part #
JHD 11-103
Type
Wire
Size
Break
Strength
Thread
Size
Length
Pin Dia.
Safe Working
Load
Jaw/Swage
3/32”
1,000 lbs
10-32
2” Adj.
3/16”
400 lbs
Rigging Hardware
▪▪Jaws have “T” toggle construction
▪▪Check nut locking
▪▪T-316 stainless steel
272
Johnson - Marine Hardware
Johnson Toggle Jaw for Machine Swage
This fitting’s universal toggle action prevents any adverse
bending of wire. Toggle nut construction. Pins included.
▪▪T-316 stainless steel
Part #
JHD 17-206
Wire
Size
A
B
C
D
E
Before
Swage Dia.
After Swage
Dia.
Safe Working
Load
3/16”
4-1/4”
2-1/4”
7/8”
3/8”
3/8”
.359”
.313”
2,800 lbs
Johnson Rigging Toggles
These stainless steel rigging toggles are essential to prevent
misalignment of rigid jaw turnbuckles. They are also used as a simple
way to save rigging that was made too short. Ultimate strength exceeds
the corresponding clevis pin.
A
B
C
D
E
F
G
Safe Working Load
JHD 12-120
Part #
1/4”
1/4”
.094”
5/16”
1”
5/16”
5/8”
1,000 lbs
JHD 12-121
5/16”
5/16”
.094”
19/64”
1-1/4”
11/32”
5/8”
1,600 lbs
JHD 12-122
3/8”
3/8”
.141”
23/64”
1-5/8”
13/32”
3/4”
2,800 lbs
JHD 12-123
1/2”
1/2”
.187”
31/64”
1-7/8”
17/32”
1”
4,200 lbs
JHD 12-124
5/8”
5/8”
1/4”
39/64”
2-1/4”
11/16”
1-1/4”
5,900 lbs
Johnson Turnbuckle / Deck Toggle Jaws
Johnson Adapter Link Plates
Use for lifeline or rigging applications, with
machine or hand swage parts.
▪▪T-316 stainless steel
These very useful links come in pairs
and will allow you to convert an eye to
a jaw or a jaw to an eye. Must be used
in pairs. Pins not included.
▪▪T-316 stainless steel
Part #
Rigging Hardware
Thread Size
Style
JHD 33-601
10-32 R.H.
‘T’ Toggle
JHD 33-602
10-32 L.H.
‘T’ Toggle
JHD 33-604
1/4-28 L.H.
Backstay Adj.
JHD 33-605
1/4-28 R.H.
Toggle Nut
JHD 33-606
1/4-28 L.H.
Toggle Nut
JHD 33-615
1/4-28 R.H.
‘T’ Toggle
JHD 33-616
1/4-28 L.H.
‘T’ Toggle
JHD 33-607
5/16-24 R.H.
Toggle Nut
JHD 33-608
5/16-24 L.H.
Toggle Nut
JHD 33-618
5/16-24 L.H.
‘T’ Toggle
JHD 33-610
3/8-24 L.H.
Toggle Nut
Pin Dia.
L
T
Safe Working Load
JHD 52-124
Part #
5/16”
1-5/16”
.185
1,600 lbs
JHD 52-125
3/8”
1-1/8”
.250
2,800 lbs
JHD 52-126
1/2”
1-5/16”
.280
4,200 lbs
JHD 52-127
5/8”
1-5/8”
.370
5,900 lbs
All Toggle Jaws can be used for life line and
rigging applications except for Deck Toggles,
which are used for Life Line applications only
273
Johnson - Marine Hardware
Johnson Diamond Plate Backstay
Johnson Split Backstay Car
An integral part of the Split Backstay Adjuster System.
Part No. 38-211 & 212 are double plates and may also
be used with eye terminals.
Pins not included.
▪▪T-316 stainless steel
This adjusting car replaces separate blocks and a connecting
member. Tandem sheaves eliminate severe flexing of the backstay,
providing a neat, thoroughly functional fitting. The 38 Series with
Delrin sheaves is intended for boats under 30ft. Max wire: 3/16”
▪▪ T-316 stainless steel w/delrin sheaves
For Pin Dia.
Safe Working Load
JHD 38-210
Part #
1/4”
1,000 lbs
JHD 38-211
5/16”
1,600 lbs
JHD 38-212
3/8”
2,800 lbs
JHD 38-203
JHD 39-201
Sheave & becket, 3/16” wire (FIG 2)
Sheave, 1/4” wire (FIG 3)
JHD 38-213
Delrin sheaves (each)
Fig 2
Johnson Stay Extenders
These stainless steel plates are designed
for extending short stays, or to replace a
turnbuckle.
▪▪All sizes include pins
▪▪T-316 stainless steel
Part #
Fig 3
Pin Dia.
Max. Pin to Pin
Safe Working Load
JHD 16-204
1/4”
3-3/4”
1,000 lbs
JHD 16-205
5/16”
4-3/8”
1,600 lbs
JHD 16-206
3/8”
5”
2,800 lbs
JHD 16-208
1/2”
5-5/8”
4,200 lbs
JHD 16-210
5/8”
6-7/8”
5,900 lbs
Note: For maximum car release, use a 1.5 to 1
ratio between backstay base width and car height.
Example: If a backstay is 5’ the car height should not
exceed 7 1/2’ to 8’ in height off deck. Higher ratios may
require manual release with aid of boat hook, etc.
Johnson Flag Mount
Johnson Locking Nuts
▪▪T-316 stainless steel
10-32 10-32 1/4-28 1/4-28 5/16-24 5/16-24 3/8-24 3/8-24 1/2-20 R.H.
L.H.
R.H.
L.H.
R.H.
L.H.
R.H.
L.H.
R.H.
JHD 40-533
Johnson Add-A-Cleat
Versatile cleat mounts directly
to a stanchion or rail of 7/8” or
1”. Stainless steel bracket and
clamp with a 4-1/2” nylon coated
aluminum cleat.
JHD 40-506
Johnson Shroud Cleat
▪▪Attaches to 5/32” thru 3/8” diameter wire or rod
▪▪T-316 stainless steel
JHD 40-518
Rigging Hardware
JHD 35-601
JHD 35-602
JHD 35-603
JHD 35-604
JHD 35-605
JHD 35-606
JHD 35-607
JHD 35-608
JHD 35-609
Easily attaches to 7/8” and 1” diameter
horizontal rail. Will accommodate 1”
wooden staff with shoulder.
▪▪T-316 stainless steel
274
Johnson - Marine Hardware
N
Johnson Toe Rail Folding Cleat
W
E
Makes a perfect movable, mid-ship cleat for spring lines, etc.
This cleat is mountable on all aluminum toe rails. The rail is
protected by a silicon rubber pad for rattle
free installation. The cleat folds out of the
way when not in use, the husky 3/8” dia.
cleat assures strength. The complete unit is
T-316 stainless. Fits most symmetric and
asymmetric aluminum toe rails.
▪▪SWL: 2000 lbs
JHD 48-510
Johnson Track Mounted Folding Cleat
3/8" dia. folding cleat is mounted on a sliding stainless steel car
for 1-1/4" track. The folding cleat is 8" long and features a knurled
screw pin for adjustment along the
track. The track surface is protected
with a Teflon/fibre strip. The entire unit
is made from T-316 stainless steel.
▪▪SWL: 2000 lbs
▪▪Track mounted folding cleat
JHD 48-511
Johnson Mini Hinged Pad Eye
▪▪Suitable for awning and many other tie
down applications
▪▪Working load should not exceed 400 lbs
▪▪Material is all T-316 stainless
▪▪Fastens with (2) 1/4" bolts (not supplied)
Rigging Hardware
JHD 48-570
Line sold seperately
Johnson Spliced Line Fittings
Johnson now offers its popular life line fittings with eye ends
for today’s high-tech, low stretch line. Johnson recommends
8mm Dyneema line in grey and blue. This line is a 12 strand
single braid, 1/7th the weight of 1/4” 1x19 cable, offering the
same strength at about the same cost. Johnson recommends
changing out the line at 3 year intervals. Professional splicing
recommended.
JHD LS-2100
JHD LS-2200
JHD LS-2500
JHD LS-4200
Over centre gate hook with eye*
Eye to eye fitting
Toggle Jaw with eye
Open body turnbuckle with eye
* Body Investment Cast in China
► Not for lifting, hanging or other high load applications.
NOTE: Before and After swage dimensions are mil spec and conform
to both our life line and rigging fittings with regard to all aspects except
cable depth in fittings. (See chart below.) The primary difference
between life line and rigging fittings is the cable depth, although other
factors exist. Always use rigging fittings when in doubt or wherever high
load applications exist. Never exceed the safe working load.
Terminal
Wire Size
Thread
Diameter
Before Swage
Dimension
After Swage
Dimension
1/8”
10-32, 1/4”
.250
.219
5/32”
1/4”, 5/16”
.297
.250
3/16”
1/4”, 5/16”, 3/8”
.359
.313
7/32”
3/8”
.427
.375
1/4”
5/16”
.427
.375
1/4”
3/8”
.494
438
5/16”
1/2”, 5/8”
.635
.563
3/8”
5/8”
.703
.625
Loos
275
Loos Tension Gauges
Loos Single & Double Shank Ball Stops
Corrosion resistant steel.
Part #
Wire Size
Double shank
LOO MS20663-C2
1/16”
LOO MS20663-C3
3/32”
LOO MS20663-C4
1/8”
LOO MS20663-C6
3/16”
Single shank
LOO MS20664-C3
3/32"
LOO MS20664-C4
1/8"
LOO MS20664-C5
5/32"
LOO MS20664-C6
3/16"
Loos Locoloc - Oval Sleeves
Zinc plated copper sleeves for splicing wire rope.
Part #
Wire Size
LOO SL-2-1.5P
3/64”
LOO SL-2-2P
1/16"
LOO SL-2-3P
3/32"
LOO SL-2-4P
1/8"
LOO SL-2-5P
5/32"
LOO SL-2-6P
3/16"
LOO SL-2-7P
7/32”
LOO SL-2-8P
1/4"
LOO SL-2-10P
5/16”
Copper round end stops for wire rope.
Part #
Wire Size
LOO ST-2-1
1/32”
LOO ST-2-1.5
3/64”
LOO ST-2-2
1/16"
LOO ST-2-3
3/32"
LOO ST-2-4
1/8"
LOO ST-2-5
5/32"
LOO ST-2-6
3/16"
LOO ST-2-8
1/4"
LOO B-#90
LOO A-#91
Cable sizes 3/16”, 7/32, 1/4” & 9/32”
Cable sizes 3/32”, 1/8” & 5/32”
Loos Professional Tension Gauges
Especially designed for accurate, repeatable tuning of
a sailboat’s standing rigging. Manufactured of rugged
anodized aluminum, this gauge is corrosive resistant.
Detailed operating instructions are included with each
tension gauge. Higher accuracy and easier to use than
standard models. The cable can be adjusted while the
gauge remains on the cable.
LOO PT-1
LOO PT-2
LOO PT-3
Cable sizes: 3/32”, 1/8” & 5/32”
Cable sizes: 3/16”, 7/32” & 1/4”
Cable sizes: 9/32”, 5/16” & 3/8”
Loos Rod Tension Gauges
Series of gauges to measure the tension in rods
from .172 to .375 inch in diameter over a range
of approximately 5 to 25% of the breaking
strength of the rod and provide an accuracy of
+ or - 5%. The RT series provides an increasing
durability, accuracy and convenience of use.
Manufactured of rugged anodized aluminum.
Detailed operating instructions are included with
each tension gauge.
LOO RT-10
LOO RT-11
For rod sizes .172”, .198”, .225” & .250”
For rod sizes .281”, .330” & .375”
Loos Cable Diameter Gauge
Makes identification of cable diameter quick
and easy. Shows metric and imperial scales.
LOO GA 4
Rigging Hardware
Loos Locoloc - End Stops
An inexpensive yet accurate method of checking cable
tension. Manufactured of rugged anodized aluminum,
the gauge is corrosion resistant and will provide years of
service. Detailed operation instructions accompany the
gauges to ensure complete accuracy.
276
Sta-Lok
Invented by Ivor Barfield the STA-LOK selffit terminal was first introduced at the London
International Boat Show in 1973. Today STA-LOK
Terminals Ltd has become one of the world’s
leading designers, manufacturers and suppliers
of high quality stainless steel rigging hardware.
Sta-Lok Forks
▪▪Provides standard end fittings for 1 x 19 wire rope
▪▪For chain plates & fixing points
▪▪316 stainless steel
Part #
Wire
A
B
C
D
P
STL 134-03
1/8”
39/64”
25/64”
5/16”
7/32”
13/64”
STL 134-04
5/32”
27/32”
37/64”
23/64”
1/4”
1/4”
STL 134-05
3/16”
31/32”
23/32”
29/64”
5/16”
5/16”
STL 134-55
7/32”
1-7/32”
7/8”
15/32”
3/8”
29/64”
STL 134-06
1/4”
1-3/16”
7/8”
5/8”
7/16”
27/64”
STL 134-07
9/32”
1-21/64”
1”
5/8”
7/16”
27/64”
STL 134-08
5/16”
1-29/64”
1-5/64”
3/4”
35/64”
1/2”
STL 134-10
3/8”
1-5/8”
1-5/32”
57/64”
35/74”
5/8”
Sta-Lok Eyes
Rigging Hardware
▪▪Provides standard end fittings for 1 x 19 wire rope
▪▪For chain plates & turnbuckles
▪▪316 stainless steel
Part #
Wire
A
B
C
D
H
STL 133-03
1/8”
45/64”
25/64”
1/4”
13/64”
1/4”
STL 133-04
5/32”
51/64”
37/64”
5/16”
15/64”
5/16”
STL 133-05
3/16”
1-1/64”
45/64”
13/64”
19-64”
25/64”
STL 133-55
7/32”
1-7/32”
29/32”
15/32”
3/8”
29/64”
STL 133-06
1/4”
1-7/32”
29/32”
1/2”
3/8”
33/64”
STL 133-06-3/8”
1/4”
1-7/32”
29/32”
1/2”
3/8”
25/64”
STL 133-07
9/32”
1-9/32”
31/32”
17/32”
27/64”
33/64”
STL 133-08-1/2
5/16”
1-13/32”
1-1/16”
9/16”
15/32”
33/64”
STL 133-08-5/8
5/16”
1-13/32”
1-1/16”
5/8”
17/32”
5/8”
STL 133-10
3/8”
1-9/16”
1-5/32”
45/64”
17/32”
5/8”
Sta-Lok
277
Sta-Lok Cone Wedges 1 x 19
▪▪Recommended where Sta-Lok terminals are being re-used
▪▪For wire sizes 1/8” - 1”
▪▪316 stainless steel
Sta-Lok Studs - UNF Thread
The 1 x 19 wedge must NOT be used for Dyform or compacted
strand wire ropes.
Designed to suit most turnbuckles &
fixing points.
▪▪RH Thread.
▪▪For 1 x 19 wire
▪▪316 stainless steel
STL 138-031/8”
STL 138-045/32”
STL 138-053/16”
STL 138-557/32”
STL 138-061/4”
STL 138-079/32”
STL 138-085/16”
STL 138-103/8”
STL 138-117/16”
STL 138-121/2”
Part #
Wire
A
B
C
STL 136-03
1/8”
2-13/32”
2-1/32”
1/4”
STL 136-04
5/32”
2-17/32”
2-1/8”
5/16”
STL 136-05
3/16”
3-1/16”
2-5/8”
3/8”
STL 136-05-5/16
3/16”
2-9/16”
2-5/16”
5/16”
STL 136-05-7/16
3/16”
3-21/32”
2-15/16”
7/16”
STL 136-55
7/32”
3-5/16”
2-5/8”
3/8”
STL 136-55-7/16
7/32”
3-21/32”
2-15/16”
7/16”
Sta-Lok Wedges 7 Strand, Metric
STL 136-06
1/4”
3-11/16”
3-3/16”
1/2”
Suitable for use with 7 x 7 & 7 x 19 wire.
STL 136-06-3/8
1/4”
3-5/16”
2-5/8”
3/8”
STL 136-06-7/16
1/4”
3-21/32”
2-15/16”
7/16”
STL 136-07
9/32”
3-13/16”
3-3/16”
1/2”
STL 136-08
5/16”
3-7/8”
3-3/16”
1/2”
STL 127-044mm
STL 127-055mm
STL 127-066mm
STL 127-077mm
STL 136-08-5/8
5/16”
4-11/32”
3-3/4”
5/8”
Sta-Lok Wedges 7 Strand, UNF
STL 136-10
3/8”
4-11/32”
3-3/4”
5/8”
STL 136-11
Suitable for use with 7 x 7 & 7 x 19 wire.
7/16”
5-15/32”
4-7/8”
3/4”
STL 136-12
1/2”
5-15/32”
4-7/8”
3/4”
STL 139-031/8”
STL 139-045/32”
STL 139-053/16”
STL 139-061/4”
STL 139-085/16”
STL 139-557/32”
Sta-Lok Formers
▪▪316 stainless steel
1/8” (3mm)
5/32” 3/16” 7/32” 1/4” 9/32” 5/16” 3/8” 1/2” (4mm)
(5mm)
(5mm)
(6mm)
(7mm)
(8mm)
(10mm)
(12mm)
Rigging Hardware
STL 115-03
STL 115-04
STL 115-05
STL 115-55
STL 115-06
STL 115-07
STL 115-08
STL 115-10
STL 115-12
Sta-Lok wedges for Dyform wire are available by request.
278
Wire / Transat
Transat Coated Stainless Wire
DyForm Wire
Unidirectional lay wire is used in rigging applications where
designers desire a lower-stretch solution than standard 1x19 wire
rigging. Dyform wire is twisted in only the left hand direction.
This construction improves the strength and stiffness of the wire
when compared to 1/19 wire of a similar diameter. Dyform is
generally recommended for use with the appropriate swaged and
swageless fittings without hydraulic cylinders. For use on keelboats
as high performance standing rigging. Smoother finish gives
lower aerodynamic drag, and breaking strength is increased over
conventional wire by more than 30 percent. Manufactured from
type 316 extra corrosion resistant stainless steel.
▪▪Sold by the foot
Dia.
Break
Load
ORM DY2.5
2.5mm (3/32”)
1518 lb
ORM DY3
3.0mm (1/8”)
2200 lb
ORM DY4
4.0mm (5/32”)
3915 lb
Part #
1 x 19
DyForm
▪▪PVC coated 7 x 7, 316 stainless steel wire
▪▪Lifelines, guard rails, suspension & tensioning
▪▪Characteristics: Very flexible
▪▪Sold by the foot or 500’ reels
Part #
Break
Load
TMW CB119118/532-500
1 x 19
1/8” - 5/32”
1,587 lb
TMW CB7X718/316
7x7
1/8” - 3/16”
1200 lb
TMW CB7X718/316-500
7x7
1/8” - 3/16”
1200 lb
TMW CB7X7316/516
7x7
3/16” - 5/16”
3168 lb
TMW CW7X7316/516-500
7x7
3/16” - 5/16”
3168 lb
TMW CW7X718/316
7x7
1/8” - 3/16”
1200 lb
TMW CW7X718/316-500
7x7
1/8” - 3/16”
1200 lb
TMW CW7X718/14
7x7
1/8” - 1/4”
1200 lb
TMW CW7X718/14-500
7x7
1/8” - 1/4”
1200 lb
TMW CW7X7316/14
7x7
3/16” - 1/4”
3168 lb
TMW CW7X7316/14-500
7x7
3/16” - 1/4”
3168 lb
TMW CW7X7316/516
7x7
3/16” - 5/16”
3168 lb
TMW CW707014
7x7
1/4” - 3/8”
6100 lb
TMW CW707014-500
7x7
1/4” - 3/8”
6100 lb
CW = White
Rigging Hardware
Dia.
CB = Black
Wire Rigging
279
Transat 316 Stainless Steel Wire
Transat 316 Stainless Steel Wire
The finest combination of corrosion and fatigue-resistance
with high strength. Available in either a 1 x 19, 7 x 7 or a 7 x
19 construction. The 7 x 7 (7 strands each made up of 7 wires)
construction offers the better abrasion resistance while the 7 x 19 (7
strands each consisting of 19 wires) provides the better flexibility.
The finest combination of corrosion and fatigue-resistance
with high strength. Available in either a 1 x 19, 7 x 7 or a 7 x
19 construction. The 7 x 7 (7 strands each made up of 7 wires)
construction offers the better abrasion resistance while the 7 x 19 (7
strands each consisting of 19 wires) provides the better flexibility.
1 x 19 Wire Rope (AISI 316 Stainless Steel)
7 x 19 Wire Rope (AISI 316 Stainless Steel)
▪▪Applications: Suspension & control cables, standing rigging
▪▪Characteristics: Very stiff
▪▪Sold by the foot or in 500’ or 1000’ reels
▪▪Applications: Blind systems, halyards, steering cables
▪▪Characteristics: Very flexible
▪▪Sold by the foot or in 500’ reels
Dia.
Break Load
TMW U719116
1/16”
480 lb
1102 lb
TMW U719116-500
1/16”
480 lb
3/32”
1102 lb
TMW U719332
3/32”
860 lb
TMW U119332-1000
3/32”
1102 lb
TMW U719332-500
3/32”
860 lb
TMW U119018
1/8”
1587 lb
TMW U719018
1/8”
1124 lb
TMW U119018-500
1/8”
1587 lb
TMW U719018-500
1/8”
1124 lb
TMW U119018-1000
1/8”
1587 lb
TMW U719532
5/32”
2000 lb
TMW U119532
5/32”
2833 lb
TMW U719532-500
5/32”
2000 lb
TMW U119532-500
5/32”
2833 lb
TMW U719316
3/16”
2822 lb
TMW U119532-1000
5/32”
2833 lb
TMW U719316-500
3/16”
2822 lb
TMW U119316
3/16”
4255 lb
TMW U719014
1/4”
5027 lb
TMW U119316-500
3/16”
4255 lb
TMW U719014-500
1/4”
5027 lb
TMW U119316-1000
3/16”
4255 lb
TMW U719516
5/16”
8500 lb
TMW U119732
7/32”
5445 lb
TMW U719516-500
5/16”
8500 lb
TMW U119732-500
7/32”
5445 lb
TMW U119732-1000
7/32”
5445 lb
TMW U119014
1/4”
7584 lb
TMW U119014-500
1/4”
7584 lb
TMW U119014-1000
1/4”
7584 lb
TMW U119932
9/32”
7824 lb
TMW U119932-500
9/32”
7824 lb
TMW U119932-1000
9/32”
7824 lb
TMW U119516
5/16”
10229 lb
TMW U119516-500
5/16”
10229 lb
TMW U119516-1000
5/16”
10229 lb
TMW U119038
3/8”
14506 lb
TMW U119038-500
3/8”
14506 lb
TMW U119038-1000
3/8”
14506 lb
TMW U119716
7/16”
19335 lb
TMW U119716-500
7/16”
19335 lb
TMW U119012
1/2”
26678 lb
TMW U119012-500
1/2”
26678 lb
Part #
Dia.
Break Load
TMW U707116-500
1/16”
445 lb
TMW U119332
3/32”
TMW U119332-500
Part #
7 x 7 Wire Rope (AISI 316 Stainless Steel)
TMW U707532
7x7
5/32”
Rigging Hardware
▪▪Applications: Suspension & positioning systems
control cables, average duty movements
▪▪Characteristics: Flexible
▪▪500’ lengths
280
Rigging Loads
W ir e R i g g i n g Fa c ts a nd I nfor m atio n
Break Loads
Facts and information
- working with wire fittings..
When planning a wire construction the ultimate
break load, as well as the work load, must be
calculated, as it will determine the minimum wire
size and maybe the wire construction needed.
Blue Wave’s fittings, unless otherwise stated, are constructed after
termination to meet 90% of the break load on the wire ropes that are
standard in the market. PLEASE NOTE : in order to guarantee safety
in a wire construction you should calculate a safety factor of 2-3 on
static constructions and a minimum of 5 on dynamic constructions. As
a general rule working loads should never exceed 20% of the break
loads.
Wire Ø Inch
Wire Ø Metre
UNF Thread Size
Break Load
1/8”
3
1/4”
1300 kg
5/32”
5/32”
4
4
1/4”
5/16”
1300 kg
2350 kg
3/16”
3/16”
N/A
5
5
6
5/16”
3/8”
3/8”
2350 kg
3500 kg
3500 kg
1/4”
1/4”
N/A
N/A
3/8”
1/2”
3500 kg
5400 kg
N/A
9/32”
9/32”
6
7
7
1/2”
1/2”
7/16”
5400 kg
5400 kg
4700 kg
5/16”
5/16”
8
8
1/2”
5/8”
5400 kg
8000 kg
3/8”
N/A
3/8”
N/A
N/A
10
N/A
10
5/8”
5/8”
3/4”
3/4”
8000 kg
8000 kg
13000 kg
13000 kg
N/A
1/2”
N/A
12
N/A
14
3/4”
3/4”
7/8”
13000 kg
13000 kg
17000 kg
5/8”
16
1”
24000 kg
3/4”
19
1-1/8”
25500 kg
7/8”
22
1-1/4”
31000 kg
1”
26
1-3/8”
43000 kg
Rigging Hardware
Swage Dimensions
Wire Ø mm
Wire Ø Inch
Inside diameter (+/-0.2)
mm
Outside diameter (+/-0.10)
mm
Depth (+/-1.5)
mm
After Swaging
mm
2.0
1/16”
2.2
5.50
32
4.7 - 4.82
2.5
3/32”
2.8
5.50
32
4.7 - 4.82
3.0
1/8”
3.5
6.35
38
5.44 - 5.56
4.0
5/32”
4.4
7.50
45
6.23 - 5.35
5.0
3/16”
5.3
9.00
51
7.83 - 7.95
5.5
7/32”
5.8
10.80
59
9.35 - 9.50
6.0
N/A
6.5
12.58
64
10.95 - 11.12
6.3
1/4”
6.8
12.58
64
10.95 - 11.12
7.0
9/32”
7.5
14.20
70
12.5 - 12.7
8.0
5/16”
8.4
16.00
83
14.07 - 14.3
9.5
3/8”
10.0
17.80
89
15.7 - 15.9
10.0
N/A
10.5
17.80
89
15.7 - 15.9
N/A
7/16”
N/A
19.83
N/A
N/A / .468”
12.0
N/A
12.5
20.00
105
17.6 - 17.8
13.0
1/2”
13.5
21.40
120
18.82 - 19.05
14.0
N/A
14.8
25.00
140
22.0 - 22.23
16.0
N/A
17.0
28.00
160
25.15 - 25.40
19.0
N/A
20.0
34.50
200
31.44 - 31.75
22.0
N/A
23.5
40.50
230
36.2 - 36.50
26.0
N/A
27.5
46.00
280
40.97 - 41-28
Sailing
281
CLAMCLEAT
283
FORESPAR
290
GLOMA
296
HARKEN
336
HARKEN HOISTERS
336
HARKEN SPORT
336
IYE
337
LEV-O-GAGE
337
PLASTREAM
337
RWO
338
SELDEN SPARS
354
SEOLADAIR - BOOMKICKER
354
SPARTITE
354
SPINLOCK DECKWARE
355
SPINLOCK HARDWARE
362
TRANSAT
368
TYLASKA
369
WICHARD
370
Micros cleat range
Nylon and Aluminium
Small, neat and lightweight for 1- 4mm 3/64” - 5/32” rope.
Advanced tooth technology to hold all types of small rope.
Can be fixed with standard screws and rivets, on tubular or flat surfaces.
Some Applications - Window blinds (cord control). Canoes (seat & rudder lines).
Control lines on dinghies (Optimist booms & carbon tillers). Kitesurfing (5th line
adjustment).
Open Cleat
Aluminium or Nylon
Fairlead Cleat
Aluminium or Nylon
Aluminium or Nylon.
Compact to fit into
small locations.
Ideal when a rope is
not always cleated.
Fairlead strengthens
cleat and allows
quick fine adjustments
of the rope.
Helps hold rope into
teeth when a line is
flogging.
Fairlead Cleat with Becket
Large Becket makes it easy
for frequent de-rigging.
Aluminium only
Side entry Cleat with Becket
Aluminium only
Side entry cleats gives the
benefit of a fairlead but use
of temporary cleating.
Tapered Pad allows correct rope/cleating alignment.
Cleats can be mounted either way round.
Pads can be stacked to increase angle or
create a riser block.
Backplate provides support on
Allows tensioning
thin deck sections.
without rubbing
rope over teeth.
Clamcleats Limited Watchmead Welwyn Garden City Hertfordshire AL7 1AP England
Telephone 01707 330101 Fax 01707 321269 e-mail [email protected]
www.clamcleat.com
Clamcleat
283
A deceptively simple ridged ‘V’ groove holds ropes firmly, yet is devoid of any moving parts to break or
seize. It allows the immediate release of the rope by a short upward and backward pull. Marine grade nylon
cleats offer very good value for money, for both production builder and sailor alike. They are ideal for most
applications where high loads or rope surges are not likely to be encountered. Nylon cleats are corrosion
resistant and will last for many years outdoors. Aluminum cleats are highly successful in providing a
complete answer to rope burn. They are unaffected by the heat generated by a rope surging back through a
cleat as well as being suitable for sub-zero temperatures.
All products listed are retail packaged
OEM’s Contact us for BULK Packs
Clamcleat Cleats for Ropes to 5/32"
Part #
CLM CL263/R
Description
Construction
Rope Size
Dimensions
Fastener
Micro
Nylon
3/64”-5/32”
1-3/4” x 15/16” x 1/2”
#4
Rope Size
Dimensions
Fastener
Clamcleat Cleats for Ropes to 5/32"
Part #
CLM CL268/R
CLM CL268AN/R
CL270
CL268 / CL268AN
Description
Construction
Micro Cleat
Aluminum
3/64”- 5/32”
1-3/4” x 1/2” x 5/8”
#4
Racing Micro Cleat
Hard Anodized
3/64” - 5/32”
1-3/4” x 1/2” x 5/8”
#4
CLM CL270/R
Racing Micro w/Becket
Aluminum
3/64” - 5/32”
1-3/4” x 1/2” x 3/4”
#4
CLM CL270AN/R
Racing Micro w/Becket
Hard Anodized
3/64” - 5/32”
1-3/4” x 1/2” x 3/4”
#4
Clamcleat Cleats for Ropes to 1/4"
CL204
Part #
CL802
CL222
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL204/R
Mini
Nylon
1/8" - 1/4"
2-1/16" x 1-7/16" x 5/8"
#4
CLM CL222/R
Racing Mini
Aluminum
1/8" - 1/4"
1-7/8" x 1-7/16" x 5/8"
#4
CLM CL222AN/R
Racing Mini
Hard Anodized
1/8" - 1/4"
1-7/8" x 1-7/16" x 5/8"
#4
Tapered Pad (204 & 222)
Polypropylene
-
2-1/4" x 13/16"
#4
CLM CL802/R
Sailing
Clamcleat Cleats for Ropes to 1/4"
Part #
CLM CL232/R
Description
Construction
Rope Size
Dimensions
Fastener
Cub
Nylon
1/8”-1/4”
1-3/8” x 1-3/8” x 1-7/16”
#4
284
Clamcleat
Clamcleat Cleats for Ropes to 1/4"
CL203
CL211MK1
Part #
CL211MK2
Description
CLM CL203/R
CL702
Construction
Rope Size
Dimensions
Fastener
Junior
Nylon
1/8" - 1/4"
3-1/4" x 5/8" x 11/16"
#4
CLM CL211MK1/R
Racing Junior MK1
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL211MK1AN/R
Racing Junior MK1
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL211MK2/R
Racing Junior MK2
Aluminum
1/8” - "1/4"
2-1/8" x 1-1/16" x 5/8"
#4
CLM CL211MK2AN/R
Racing Junior MK2
Hard Anodized
1/8” - "1/4"
2-1/8" x 1-1/16" x 5/8"
#4
Boom Cleat
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL702/R
CLM CL704/R
CLM CL704AN/R
Boom Cleat
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
Racing Junior MK1 with Becket
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
Clamcleat Accessories
CL814/R
CL819/R
CL817/R
CL815/R
CL816/R
CL818/R
Part #
Description
CLM CL814/R
Keeper for CL203, CL211MK1, CL217MK1, CL218MK1 & CL236
CLM CL815/R
Keeper (Acetal) for CL211MK2 & MK2AN
CLM CL816/R
Cage for CL203, CL211MK1 &CL236
CLM CL817/R
Cage (Nylon & S/S) for CL211 MK2 & MK2AN
CLM CL818/R
Tapered Pad for CL203, CL211MK1, CL217MK1, CL218MK1, CL236 & CL704
CLM CL819/R
Tapered Pad (Polypropylene) for CL211MK2, CL217MK2 & CL218MK2
CLM PT230SSE*
Sailing
PT230SSE
Stainless steel eye for CL230 (6mm eye)
* Request Item
Clamcleat Omega Cleat
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL255/R
Part #
Omega
Aluminum
1/8” - 1/4”
1-13/16” x 1-1/16” x 1-11/16”
#4
CLM CL255AN/R
Omega
Hard Anodized
1/8” - 1/4”
1-13/16” x 1-1/16” x 1-11/16”
#4
285
Clamcleat
Clamcleat Side Entry Cleats for Ropes to 1/4”
CL217MK1
CL217MK2
Part #
CL218MK2
CL218MK1
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL217MK1/R
Side Entry (STB)
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL217MK1AN/R
Side Entry (STB)
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL217MK2/R
Side Entry (STB)
Aluminum
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL217MK2AN/R
Side Entry (STB)
Hard Anodized
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL218MK1/R
Side Entry (Port)
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL218MK1AN/R
Side Entry (Port)
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL218MK2/R
Side Entry (Port)
Aluminum
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
CLM CL218MK2AN/R
Side Entry (Port)
Hard Anodized
1/8" - 1/4"
2-1/8" x 1-1/16" x 11/16"
#4
Clamcleat Sail Cleats
CL212A
CL214
CL258
CL241
CL212
Plate & Rivets
Part #
CLM CL212
Description
Construction
Rope Size
Dimensions
Fastener
Leech Line Cleat
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Fine Line (STB) & B/Plate
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Fine Line (STB) & B/Plate & Rivets
Nylon
1/16” - 3/16”
2-3/4” x 1-15/16” x 13/16”
#4
Shield
Nylon
-
-
-
CLM CL212BP
Backplate (CL212 & CL241)
Nylon
-
-
-
CLM CL213/R
Fine Line (Starboard)
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL214/R
Fine Line (Port) Black
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL214W
Fine Line (Port) White
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL212+PR
CLM CL212+PR/R
CLM CL212A
CLM CL214W+P
Fine Line (Port) & B/Plate
Nylon
1/16" - 3/16"
2-3/4" x 1-15/16" x 13/16”
#4
CLM CL221
Dinghy Leech Line - Complete
Nylon
1/16” - 3/16”
1-3/4” x 1-3/16” x 11/16”
#3
CLM CL233*
Sail Line Cleat
Nylon
1/16” - 1/4”
2-1/4” x 1-3/8”
-
CLM CL241/R
Racing Sail Line Cleat
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL241+P
Racing Sail Line Cleat & B/Plate
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
Racing Fine Line (STB)
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL258+P
Racing Fine Line (STB) & B/Plate
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL259/R
Racing Fine Line (Port)
Aluminum
1/8" - 1/4"
2-3/4" x 1-15/16" x 13/16"
#4
CLM CL267
Racing Sail Edge Cleat
Nylon
1/16” - 3/16”
2” x 1-3/16” x 1-7/16”
#4
* Request Item
Sailing
CLM CL258/R
286
Clamcleat
Clamcleat Roller Cleats for Ropes to 5/16"
CL236
CL230
Part #
CL253
Description
Construction
Rope Size
Dimensions
Fast
CLM CL230/R
Racing Junior Mk1 w/Roller
Aluminum
1/8" - 1/4"
3/14" x 2-5/8" x 11/16"
#5
CLM CL230AN/R
Racing Junior Mk1 w/Roller
Hard Anodized
1/8" - 1/4"
3/14" x 2-5/8" x 11/16"
#5
CLM CL236/R
Roller Fairlead Mk1 Racing Junior
Aluminum
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL236AN/R
Roller Fairlead Mk1 Racing Junior
Hard Anodized
1/8" - 1/4"
3-1/4" x 2-5/8" x 11/16"
#5
CLM CL253/R
Trapeze & Vang Cleat
Aluminum
3/16" - 5/16"
3-1/2" x 2-3/4" x 11/16"
-
CLM CL253AN/R
Trapeze & Vang Cleat
Hard Anodized
3/16" - 5/16"
3-1/2" x 2-3/4" x 11/16"
-
CLM CL834/R
Handle for Trapeze cleat
Clamcleat Auto Release Cleat
Part #
CLM CL257/R
Description
Construction
Rope Size
Dimensions
Fastener
Auto Release Racing Mini
Aluminum/Acetal
3/16" - 1/4"
2-5/8" x 1-13/16" x 7/8"
#4
Clamcleat Cleats for Ropes to 5/16"
CL209
Part #
CL254
Description
Rope Size
Dimensions
Fastener
CLM CL209/R
Midi
Nylon
3/16" - 5/16"
2-7/8" x 2-1/8" x 3/4"
#5
CLM CL254/R
Racing Midi
Aluminum
3/16" - 5/16"
2-3/4" x 2-1/8" x 3/4"
#5
Racing Midi
Hard Anodized
3/16" - 5/16"
2-3/4" x 2-1/8" x 3/4"
#5
Tapered Pad (209 & 254)
Polypropylene
-
3-1/8" x 15/16"
#5
CLM CL254AN/R
CLM CL803/R
Clamcleat Cleats for Ropes to 3/8”
Sailing
Construction
CL803
Part #
Description
CL202
CL207
Construction
Rope Size
Dimensions
Fastener
CLM CL202/R
Horizontal
Nylon
1/4" - 3/8"
2-5/16” x 3-1/8”
#6
CLM CL206/R
Lateral (Starboard)
Nylon
1/4" - 3/8"
3" x 1-15/16"
#6
CLM CL207/R
Lateral (Port)
Nylon
1/4" - 3/8"
3" x 1-15/16"
#6
287
Clamcleat
Clamcleat Cleats for Ropes to 1/2"
Part #
CL201
CL804
CL219
Description
Construction
CLM CL201-O
Old Style Vertical
Nylon
1/4” - 1/2”
4-1/4” x 1-1/2” x 1”
#6
CLM CL201/R
Vertical
Nylon
1/4" - 1/2"
3-3/4" x 13/16" x 1-1/8"
#6
CLM CL219/R
Racing Vertical
Aluminum
1/4" - 1/2"
3-9/16" x 2-13/16" x 1-1/16"
#6
CLM CL219AN/R
Rope Size
Dimensions
Fastener
Racing Vertical
Hard Anodized
1/4" - 1/2"
3-9/16" x 2-13/16" x 1-1/16"
#6
CLM CL228/R
Vertical w/Fairlead
Nylon
1/4" - 1/2"
4-1/2" x 2-13/16" x 1-3/16"
#6
CLM CL804/R
Tapered Pad (201 & 219)
Polypropylene
-
4-1/16" x 1-3/8"
#6
Clamcleat Cleats for Ropes to 5/8"
CL205
Part #
CLM CL205/R
CL220
CL805
Description
Construction
Rope Size
Dimensions
Fastener
Major
Nylon
3/8" - 5/8"
4-13/16" x 3-3/4" x 1-7/16"
#8
CLM CL220/R
Racing Major
Aluminum
1/2" - 5/8"
4-5/8" x 3-3/4" x 1-7/16"
#8
CLM CL805/R
Tapered Pad (205 & 220)
Polypropylene
-
5-1/8" x 1-3/4"
#8
Clamcleat Cleats for Ropes to 5/16"
Part #
CL215
CL231
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL215/R
Side Fixing Midi
Nylon
5/32” - 5/16"
1-1/2” x 1-1/8” x 1-11/16”
#5
CLM CL231/R
Midi w/Integral Fairlead
Nylon
5/32” - 5/16"
3-7/16” x 2-1/8” x 7/8”
#5
Clamcleat Bollards
Part #
CLM CL208/R
Description
Construction
Rope Size
Dimensions
Fastener
Clam Bollard
Nylon
1/4" - 3/8”
3-3/8” x 2-1/2”
#6
Clamcleat Spring-Gate Cleats
CL237/R & 239/R
Sailing
Part #
CL238/R
Description
Construction
Rope Size
Dimensions
Fastener
CLM CL237/R
Vertical w/Spring Gate
Nylon
1/4" - 1/2"
3-3/4" x 13/16" x 1-5/8"
#6
CLM CL238/R
Racing Vertical w/Spring Gate
Aluminum
1/4” - 1/2”
3-9/16” x 13/16” x 1-5/8”
#6
CLM CL239/R
Major w/Spring Gate
Nylon
3/8” - 5/8”
4-5/8” x 3/4” x 1-5/8”
#8
288
Clamcleat
Clamcleat Mini Line-Lok Cleats
Part #
CLM CL266/R
CLM CL260G/R
Description
Construction
Rope Size
Dimensions
Qty
Mini Line Lok
Nylon
to 1/8"
55/64” x 17/64
12/pkg
Mini Line Lok (Glow-In-Dark)
Nylon
5/64” - 3/16”
1-1/4” x 3/8”
8/pkg
Mini Line Lok
Nylon
5/64” - 3/16”
1-1/4” x 3/8”
8/pkg
CLM CL260/R
Clamcleat Cleats for Rigging on a Rope
Ideal for hanging and adjusting fenders.
CL223W
Part #
CLM CL223/R
Description
Construction
Rope Size
Dimensions
Loop Cleat (Black)
Nylon
1/8” - 1/4”
2-1/16” x 11/16”
CLM CL234/R
Fender/Large Loop Cleat (Black)
Nylon
1/4" - 1/2"
3-1/16" x 15/16"
CLM CL234W/R
Fender/Large Loop Cleat (White)
Nylon
1/4" - 1/2"
3-1/16" x 15/16"
Clamcleat Power Grip Cleats
CL261/R
CL262/R
Description
Construction
Rope Size
Dimensions
CLM CL261/R
Part #
Power Grip 1
Aluminum
1/8" - 1/4"
3-3/4" x 11/16"
CLM CL262/R
Power Grip 2
Aluminum
1/8" - 1/4"
7-7/16" x 11/16"
Sailing
Clamcleat Tube Cleat
Part #
CLM CL244/R
Description
Construction
Rope Size
Dimensions
Fastener
Boom Cleat & Clamp
Aluminum/Nylon
1/8" - 1/4"
2-1/4"
#8
289
Clamcleat
Clamcleat Windsurfing Cleats
Part #
CL248/R
CL252/R
CL250/R
Description
Construction
Rope Size
Dimensions
Fastener
Downhaul W/Hook & 3 Sheaves
Aluminum
1/8" - 3/16"
2-3/4" x 1-9/16”
-
CLM CL250/R
Gap Closer
Aluminum
1/8” - 3/16”
3-1/4” x 1-1/2”
#10
CLM CL252/R
Outhaul w/Fairlead
Aluminum
1/8” - 1/4”
2-1/4” x 1-3/4”
#10
CLM CL248/R
Clamcleat Kitesurfing Cleats
CL265
CL264
Part #
Description
Construction
Rope Size
Dimensions
CLM CL264/R
Cobra Cleat
Aluminum
3/16” - 1/4”
4-23/32” x 29/32”
CLM CL265/R
Bar Cleat
Aluminum & S/S
5/32” - 5/16”
2-1/2” x 11/16”
Clamcleat Aero Cleats
CL826-11
CL827-11
▪▪Allows cleats to be rigged on a rope
Part #
Description
Construction
Rope Size
Dimensions
CLM CL826-11AN/R*
Base & CL211 MkAN
(fits the Mk2 junior cleats)
Aluminum
1/16” - 1/4”
2-3/4” x 5/8”
CLM CL827-11AN/R*
Base & CL211 Mk1 Racing Junior
(fits the Mk1 junior cleats)
Aluminum / Nylon
1/16” - 1/4”
4-3/8” x 3/4”
*Request Items
Sailing
290
Forespar
Forespar “Patented” Line Control Whisker Poles
Line Control is a proven concept in telescoping whisker pole design and available only on Forespar
Whisker Poles. Line Control poles are heavy duty two section aluminum spars which can be extended
up to 27’ by simply un-cleating the line at the inboard end, extending or retracting the pole to the
desired length and re-cleating the line. This adjustment process is quick and easy, even with the largest
pole, and is executed with the operator positioned safely at the mast.
End Fittings
Part #
Other Sizes & Lengths
Available on Request
Please call
Recommended Mast
Fittings
Collapsed Length/
Weight
Max. Working
Length
Tubing
Diameters
UXP
PE-3SC, RC-125,
FC-125
10’ 1-3/4” / 17 lbs
18’- 2”
2” & 2-1/2”
EL
UTR
PE-3SC, RC-125,
FC-125
10’ 1-3/4” / 17 lbs
18’ -2”
2” & 2-1/2”
UXP
UTR
RC-125, FC-125
12’ 4-1/2” / 27 lbs
22’ -1/4”
2-1/2” & 3”
Model #
Inboard
Outboard
FRS 401106
LC-18 EL-UXP
EL
FRS 401107
LC 10-18 EL-UTR
FRS 402200
LC 12-22 UXP-UTR
FRS 402201
LC 12-22 UTS-UTR
UTS
UTR
T-125, AT-125
12’ 4-1/2” / 28 lbs
22’ -1/4”
2-1/2” & 3”
FRS 403200
LC 13-24 UXP-UXP
UXP
UXP
RC-125, FC-125
13’ 6” / 38 lbs
22’- 8”
3” & 3-1/2”
FRS 403202
LC 13-24 UTS-UTR
UTS
UTR
T-125-S
13’ 6” / 39 lbs
22’ -8”
3” & 3-1/2”
Forespar Small Telescoping Whisker Poles
406100
Designed for boats up to 16 feet in length operating under
most sail and wind conditions or boats up to 22 feet only
under light wind conditions with a working jib. These telescoping models can be adjusted to any desired length within their range and
securely locked in position with an effortless twist of the inner tube. There are two choices of outboard fittings; the original spike style (SE1 on the 4-8 pole and SE-2 on the 6-12 pole) which is inserted thru the bowline knot at the jib clew or the latch style (EF-1 on the 4-8 pole
and EF-2 on the 6-12 pole) which attaches over the jib sheet outboard of the knot so that the sheet can run free if necessary. All small poles
include strong corrosion-free Lexan end fittings and a Mast Pad Eye with stainless steel screws.
Model
Ends
Telescopes
Diameter
Weight
FRS 404000
Part #
ADJ 4-8
Spike & Latch
53” to 93”
1”
3 lbs
FRS 404100
ADJ 4-8 DL
Latch & Latch
53” to 93”
1”
3 lbs
FRS 406000
ADJ 6-12
Spike & Latch
72” to 134”
1-1/4”
3 lbs
FRS 406100
ADJ 6-12-DL
Latch & Latch
72” to 134”
1-1/4”
3 lbs
Other Sizes & Lengths
Available on Request
Please call
Parts:
FRS 404011
PE-1 Pad eye
Sailing
Forespar
Heavy Duty Telescoping Whisker Poles (Twist Lock)
These telescoping whisker poles are heavy duty two section aluminum
spars which can be extended to lengths up to 15’ and securely locked
in position by an internal twist lock device. Poles feature self-latching
Ultra Series fittings on the inboard and outboard ends. Self-latching
fittings on both ends.
Part #
Model
Telescopes
Diameter
Weight
FRS 406300
HD 6-12-DL
79” to 138”
1-7/8”
8 lbs
FRS 407101
ADJ 7-15-DL
83” to 169”
2”
8 lbs
Parts:
FRS 304015
Special inboard (big) end only (HD 6-12 DL)
Other Sizes & Lengths
Available on Request
Please call
291
Forespar
Forespar Tri-Reacher Whisker Pole
The new Forespar Tri-Reacher Whisker Pole has been developed specifically
for use with asymmetrical nylon sails. Use of a whisker pole with these sails
will allow deeper sailing angles and eliminate the need for constant jibing
downwind.
On long downwind legs, the additional rigging of fore and after-guys (attached
to the outboard end) will further stabilize the pole. This will also allow
emergency furling of the headsail without the need to go forward and deal
with the pole first. This helps greatly when sailing at night or short-handed.
The inboard ends are Forespar’s time proven “UTS” style socket end or
“UXP” piston style. The outboard end is our “UXP” style. The “UTS” end
will only fit the Forespar toggle/knuckle pin assemblies (#333010) as used on
our fixed mast TS mounts (#333025) and our T-125-S mast cars (#333004).
The “UXP” style fits #331000 RC-125 Ring Car or FC-125 (#332002) mast
cars and #332025 fixed mast mounts.
The toggle/knuckle pin assemblies can be used on other brands of mast cars
such as Harken, Selden, Isomat and others. They require a1/2” hinge pin or
bolt and 1” space between flanges/tabs.
FRS 408200
FRS 408201
Tri reacher whisker pole UTS, 8’ to 20’ 10”
Tri reacher whisker pole UXP, 8’ to 20’ 10”
Forespar Spinnaker Pole End Fittings
Represents the cutting edge in spinnaker pole end fitting technology. Designed for high strength, very light weight and resistance
to wear and corrosion, the Ultra Series composite end fitting is perfect for aluminum or carbon fibre spinnaker poles and whisker
poles. The Ultra Series is the sailor’s choice for inshore and offshore racing and cruising. Available with or without triggers.
Maximum LOA Boat Outboard End - 43’. Maximum LOA Boat Inboard End - 36’. All larger boats use GP Series.
▪▪Trip line is Spectra with terminal eye strap included. Length is sufficient for standard pole lengths based on diameter
For Pole
Model No.
Fits
Diameter
FRS 304054
UXP-150-EF
1-1/2”
1.370”
2-3/4”
6.97 oz
FRS 304050
UXP-200-EF
2”
1.870”
2-3/4”
6.97 oz
FRS 304051
UXP-250-EF
2”-1/2”
2.334”
3-1/4”
9.25 oz
FRS 304052
UXP-300-EF
3”
2.835”
3”
11.92 oz
FRS 304053
UXP-350-EF
3.5”
3.26”
3.625”
15.72 oz
FRS 304060
UTR-200-EF
2”
1.87”
2.75”
9.97 oz
FRS 304061
UTR-250-EF
2-1/2”
2.334”
3-1/4”
9.25 oz
FRS 304062
UTR-300-EF
3”
2.835”
3”
11.92 oz
Part #
Tube
Inside Dimension
End Fitting
Length
End Fitting
Weight
304054
304060
Parts:
FRS 309049
FRS 309080
TR-200 thru TR-450 repair kit
XP-200 thru XP-450 repair kit
The UGPS end fitting comes with a stainless steel lined throat. As always, this deluxe
ocean racing end fitting features a wide flared throat. UGPS ends also feature our proven
spring loaded piston system with roller for positive lock and release.
All UGPS ends for outboard pole end use only. Will not work with mast cars. All
outboard ends are internal trip only.
Pole end model number: UGPS-300-EF-ULTRA
Part #
FRS 304021
► Also See
Tube Dia.
Tube ID
Weight
Fitting
Length
3”
2.835”
2 lb 6 oz
5”
Transat Spinnaker Poles pg 368
Sailing
Forespar Offshore Series Grand Prix End GP & Ultra Series-GPS
292
Forespar
Forespar Ring Style Mast Car
Forespar Mast Pad Eyes
To complement most medium sized
whisker poles. Two stainless steel
styles available, for a flat or curved
surface mount.
▪▪Measurements: 2-3/4" x 2", inside dia. 1-5/8"
FRS 400001
FRS 400002
FRS 400012
FRS 339008 Track 1-1/4" clear 10' section
FRS 339009 Track end stop MS-125
Forespar Heavy Duty Car
This heavy duty, versatile mast car was
developed to eliminate the possibility of
binding as well as allowing poles up to 4-1/2"
in diameter to hang vertically up the mast for
storage. It incorporates an articulating flange
that acts like a goose neck and reduces the
chance of end fitting binding. This fitting can
handle rough offshore work as well as spinnaker pole jibes under
racing conditions. The FC-125 accepts all end fittings: Easy Latch
(EL), Piston (XP), Trigger (TR), and the Ultra External Trip Piston
(UXP) except the socket style fittings (TS & UTS). The FC-125
car fits the standard 1-1/4" T-track and requires a “heel lift” or
uphaul/downhaul tackle system for vertical adjustment on the mast
track. Shackles are provided on the top and bottom of the hinge pin
for attaching blocks or dead-ending of control lines. Replaceable
UHMW (ultra high molecular weight) inserts keep the car from
galling on the track.
FRS 332002
Forespar Stainless Steel Toggle Car
Sailing
FRS 331000RC-125
PE-3SF Flat base
PE-3SF Curved base
PE-3SSF w/Struts, flat base
Forespar T-Track & Stops
The Toggle style sliding car, T-125-S is
designed for large poles and offshore sailing
conditions on boats 35 feet and over. This
ultimate in sliding car design allows the
pole to twist without binding as well as
providing for the necessary vertical and
horizontal movement. Allowing a whisker
pole to twist helps eliminate much of the
chafing which can occur on long downwind legs during trade-wind
sailing. This style of mast car also allows for vertical pole storage
(up to 4-1/2" dia.). Made to fit the standard 1-1/4" “T” track.
FRS 333004T-125-S
Parts:
FRS 331013
The ring and body of this unusually strong car is
investment cast 17-4 heat treated stainless steel to
provide great strength. Compatible with UXP and
UTR pole end fittings. Ring I.D. is 1-5/8"
Replacement runners
Forespar
Fixed Mast & FC Toggle Mounts
▪▪Add a spinnaker or wisker pole with out using
a full track system on your mast
▪▪For boats 30 to 50’
▪▪Fits mast thicknesses from 2-1/2” to 5-1/2” wide
▪▪7” length with 10 x 1/4” staggered mounting holes
FRS 332025
FRS 333025
TS toggle (UTS & TS)
FC toggle (Piston & Trigger style)
Forespar Deck Chock
These are used to stow spinnaker poles or whisker
poles on the deck. They have been designed to
withstand rugged use, while also offering an almost
“snag-proof” profile on the deck. The model DC-2
deck chock is the standard which accommodates
all end fittings except the socket style inboard end
fitting.
FRS 300002
DC-2 (UXP & URT end)
Forespar Stanchion Mount Chocks
Stanchion mounted pole chocks to help you
clear the decks. These chocks are molded
from durable, weather-resistant urethane
and mount easily onto 1" stanchions. No
drilling is necessary. Stanchion chocks are
designed to accommodate poles from 2" to
3-1/2" in diameter. Stanchion chocks are
sold individually. Two chocks are needed for each pole. Note the
position of the stanchions relative to the desired pole location and
select the chocks that match the pole O.D. at those two positions on
the pole.
FRS 300050
FRS 300042
FRS 300043
FSR 300044
SC-200 SC-250 SC-300 SC-350
2" dia. poles
2-1/2" dia. poles
3" dia. poles
3-1/2” dia. poles
293
Forespar
Forespar Mast Pole Chocks
Forespar Vertical Pole Storage Car
Molded from durable high tech urethane, these chocks allow for
storing the pole vertically against the face of the mast. Two MPC
chocks mounted 2'-3' apart will help stop the pole from rattling.
Caution: The outboard end of the pole should be protected or
contained to prevent the jib sheets or other lines from catching on
and pulling the pole out of its storage chocks.
This mast fitting can be rigged with the T-125 mast car.
This mast fitting is a simple solution to vertical pole
storage problems. The VPC-125 retains the upper end
of the stowed pole on the mast centre line. The chock
slides on the track and eliminates rattle, vibration and
binding of the pole end.
▪▪Fits 1-1/4" T-Track
FRS 300072
FRS 300073
FRS 300074
MPC 300 3"
MPC 350 3-1/2"
MPC 400 4”
FRS 335102
Forespar Yacht Rod & Fittings
Excellent vang/boom support for performance cruising and racing. Hard anodized aluminum
& polished stainless steel. Supplied with wire cable ready to add your tackle system. Your 4:1
equals 8:1 when installed on Yacht Rod. Can be led to small winch for additional power. Spring
return holds boom. Brackets for mast and boom sold separately.
▪▪Eliminates need for boom topping lift
▪▪Supports boom in light air and when reefing and lowering the mainsail
▪▪Faster than hydraulics - No messy hydraulics to leak
▪▪More efficient than conventional tackles
▪▪Tubing is white coated anodized 6061-T6 aluminum and electropolished 316 stainless steel
▪▪Precision machined 6061-T6 aluminum clevis ends, sheaves and Nylatron® bearings
▪▪Precipitation hardened stainless steel spring with fast-pin adjustment
▪▪No gas spring to lose its charge
Description
Stroke
Adjustable Length
Adjustable
Distance
Pin
Size
Jaw
Width
Weight
Max. Return
Force
Medium Yacht Rod YR-Medium
7”
58-1/2” to 70-1/2”
12”
1/2”
3/8”
9.8 lbs
600 lbs
Part #
FRS 352000
FRS 352003 Medium boom lug YR-M
FRS 352005 Medium mast bracket YR-M
FRS 352103* Boom Lug YR-L & XL
FRS 352104* Mast Bracket YR-L & XL
* Request Items
352003
352103
352005
352104
Forespar Sail Saver Jib Rollers
Forespar Jib Roller
Sold in pairs, these light weight, easily
installed rollers can be used on the spreader
tips or life lines to help skirt the foot of the jib.
Sail Savers can also be used on backstays of
catamarans or other boats with large roached
mainsails. Centre hole is 3/16” and can be drilled out to 3/8”
maximum. No tools required for installation or removal. The two
halves “mate” (slide them together and they lock) and two clips are
snapped on for added safety.
Jib rollers for wire sizes 3/16” to 3/8”. Extend
the life of your Genoa by reducing chafe on
the spread tips. Jib rollers can also be used on
lifelines to help skirt the foot of the jib over
stanchions. Sold in pairs.
FRS 210020SR-3
Made of high-strength polyethylene, these
tough polymer guards are UV inhibited for
long life. Shackle guards can also be used
on lifelines to skirt genoas.
FRS 210003
Forespar Lanocote pg 141
SG-1 SG-2 SG-3
SG-4 2-1/4" dia. x 3/8" ID
2-1/4" dia. x 1/2" ID
3" dia. x 1/2" ID
3" dia. x 5/8" ID
Sailing
Forespar Shackle Guards
FRS 300006
FRS 300007
FRS 300008
FRS 300009
► Also See
SR-2 Jib Roller Wire 3/16”-3/8”
294
Forespar
Forespar Exit Box
For use with the new high-tech fibres. Use this new exit on all trip
lines and topping lifts. It is suitable for aluminum and ideal for
carbon fibre poles as there is no metal to metal contact to promote
corrosion. The axles are stainless steel molded into a strong
Marelon® cheek with no moving parts.
▪▪Flange size: 3-1/4” L x 7/8” W
▪▪Cut-out size: 2” x 11/16”
▪▪Maximum line size: 1/4”
▪▪Uses two 3/16” flat head fasteners
FRS 030016
Forespar Tiller Extensions
An economical fixed length tiller extension features the
removable Speed Lock (SL) fully universal
composite end fitting mounted on rugged
5/8” diameter black anodized
aluminum tubing with a rubber
Ball End handle. It is designed
for smaller boats (up to 22’ maximum) and is available in three
lengths. The Speed Lock (SL) ends are fully universal and have
been proven very strong and reliable. The composite universal
swivel slides into a base that is permanently mounted to the tiller.
To remove, simply push down on the “Speed-Lock” button and
slide the extension off the base. The Speed Lock universal is
threaded into the end of the tiller extension handle allowing for easy
replacement should it be necessary.
FRS 102002
30” ball grip
► Larger sizes available on request
Forespar
“Big Sticks” Carbon Fiber Tiller Extensions
▪▪Light, stiff, rugged
▪▪Precise helm control
▪▪7/8” diameter shaft for a solid grip for either men or women
All straight tubes so that they can be modified by each sailor to
tailor fit his/her boat. Simply cut the tube to length on the outboard
end. All come with the proven “speed lock” design for quick
mount/dismount and easy replacement if necessary. The extensions
are shipped loose for custom lengths
to suit your class requirements.
Sailing
FRS 10221430”
FRS 10221748”
Forespar
“Giant Sticks” Carbon Fiber Tiller Extensions
▪▪Speed-lock end
▪▪Texture finished for positive grip
The Big Stick’s big brother, the Giant Stick offers all the features
of the Big Stick with a larger diameter tube for a more comfortable
and positive feel. 1-1/4” diameter shaft for a solid grip for either
men or women.
FRS 10222248”
► Also See
Tiller Extensions pg 340 & 368
Forespar
Twist Lock Tiller Extensions
The “TFP” style tiller extension is constructed of white powder
coated anodized aluminum with a rubber ball style comfortable
grip and stainless steel end fittings. Forespar “twist-lock” style tiller
extensions are designed to work in either direction, this design has
the advantage that if you forget which way you “locked” the unit,
you can “unlock” it without forcing it to jam. Racers and cruisers
use this rugged twist-lock telescoping detachable extension on
boats in the mid to high 30’s. Because they are detachable, they
need not be stored on the tiller. The all stainless steel “TFP” quick
release end allows for full horizontal and vertical movement of the
tiller extension and it can be removed with the simple push of a
button located on the top of the fitting.
FRS 104016
FRS 104017
TFP-S 19” to 32”
TFP-M 27” to 48”
FRS 104004
TFP assembly c/w socket
Parts:
Forespar
Fixed Twist Lock Tiller Extension
The “Sta-Fast” style patented end fitting has the unique ability to
hold the tiller extension up-just where you left it- without falling
down below the level of the tiller. No more falling down out of
reach! This “holding” feature is adjustable on the permanently
mounted “Sta-Fast” end. The “Sta-Fast” style end is very strong
and also features a double plate mount that keeps the thru-bolt
from turning inside your tiller. The plates mount top and bottom
on the tiller and also serve as a chafe-guard for the top of the tiller.
Permanent mount only. Incorporates a 5/16" thru bolt which will
accommodate tiller thickness up to 1-1/2".
FRS 108100
SF-S 19" to 32"
Forespar Marelon Cleats
Molded from high-strength Marelon for strength, light weight and
low cost. The use of Marelon allows these cleats to take up the
curve of a deck without breaking, while maintaining strength and
resisting abrasion - will not soften on hot days or freeze in winter.
Part #
Length
Hole Dia
FRS 941018
3"
5/32"
FRS 941016
4"
3/16"
FRS 941013
5"
3/16"
FRS 941014
6-1/2"
1/4"
FRS 941015
8"
1/4"
Forespar
295
Forespar Nash Labels
Forespar Spreader/Decklight
These popular label sets are great for any racer or cruiser. Add safety
and organization to your above and below deck systems. Remember,
not everyone on board knows your boat as well as you do. These high
quality labels are self-adhesive, vinyl plastic, waterproof and won’t
fade. Perfect for flat, round or irregular surfaces of metal, fibreglass
or paint.
The ML-1 deck light is designed primarily
for installation on the mast just below the
spreaders. Made from a noncorrosive, durable
molded polymer that saves weight and limits
corrosion on the mast. The light incorporates a
readily adaptable wraparound mounting apron
to accommodate virtually any mast surface curvature. All light
bodies are molded in black and are for 12 volt systems.
▪▪20W, 1.4 amps, replaceable halogen bulb
▪▪3-5/8” Vertical height
FRS 100013
FRS 100014
FRS 100016
FRS 100010
FRS 100011
FRS 100017
FRS 100015
FRS 100022
FRS 100023
FRS 100024
206 Spar
201 Cleat & winch
202 Control lines
203 Track numbers
204 Nash scale 0”-10”
207 Racing flags
208 Nash tank labels
212 Electrical wire
213 Instruments
214 Nash stopper labels
Forespar Railfast Antenna Mount
Nylon mounts attach quickly to 1” or 7/8”
railings, horizontally, vertically, or at any angle,
providing a professional and secure mounting for
standard VHF, CB, and Loran antennas up to 8’
in length. A special internal feed-through channel
accommodates Loran cable that is routed directly
out the bottom of the coupler. Secured to the rail using an allen key
which is provided.
FRS 156009311NLH
Forespar Marelon Winch
With exceptional strength, this lightweight winch will easily handle
up to 200 square feet of sail. This winch is ideal for use on the
modern trailer-sailor or the small racer. On larger boats, it is great for
out-hauls and other control lines with relatively low
loads. Uses four 1/4” fasteners (not included).
▪▪Accepts standard star drive winch handle
▪▪8:1 power ratio when used with a 10” handle
▪▪6:1 power ratio when used with an 8” handle
▪▪All Marelon construction
▪▪Height: 3-3/8”
▪▪Base: 3-5/8” x Top: 3-1/4” x drum diameter: 2-7/16”
▪▪Four fastener holes in 1-7/8” square pattern
▪▪Only weighs 0.86 lbs
FRS 960003
Forespar Deck/Bow Light
FRS 132000ML-2
Optional stainless steel chafe guard.
▪▪Height: 5-5/8”
FRS 132200
S/S Guard
FRS 132025
Replacement upper bulb (ML-2)
Parts:
Parts:
FRS 132035
Replacement lower bulb (ML-1 & 2)
Forespar Lightning Master
Static dissipaters lower the exposure to a
direct lightning strike by controlling the
conditions which trigger direct strikes (i.e.
they reduce the build-up of static ground
charge and retard the formation of the ion
“streamers” which complete the path for
a lightning strike). The dissipater employs the point-discharge
principal to continually leak off the lightning causing ground
potential in low amperage dissipation over a long period of time
instead of the short duration. Length: 21”
FRS 151100
Forespar
Sta-Plug Emergency Plug
▪▪Soft foam fits irregular shaped leaks and holes
▪▪Can easily be cut with a knife to fit smaller holes
▪▪Ridged edges help hold plug in place
▪▪Form-fitting foam fills gaps
▪▪Fits into hard to reach areas
▪▪4-3/4" x 8-3/4"
FRS 150110Each
Forespar Water Light
Built to meet US Code of Federal
Regulations sub part 161.010; this
rugged water light produces brilliant
strobe flashes automatically when thrown
overboard and is visible for miles at sea.
When used with a 6 volt alkaline lantern
battery (not included) it will flash at the
U.S.C.G. required rate for over 52 hours
and will still flash at least every 2 seconds
after 7 days of continuous operation.
▪▪Meets U.S.C.G. requirements – 46 CFR-161-010
▪▪Stainless steel molding bracket included
▪▪Dimensions: 11-1/2” long, and 4” maximum diameter
FRS 205102
Sailing
For use on power or sail driven vessels under
20 meters (65.6 ft.). 3 mile visibility - complete
with 10 watt/12 volt bulb. Features separate
switching, 6” triple lead wire and is made from a
noncorrosive, durable molded polymer that saves
weight and limits corrosion on the mast. Also
incorporated is a readily adaptable wraparound
mounting apron to accommodate virtually any
mast surface curvature. 6” triple lead wire.
FRS 131000
296
Gloma
Gloma
Captive Pin, ‘D’ Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Part #
Inside
Width
Inside
Length
Break Load
Gloma
‘D’ Shackles
GLO 101-I
5/32”
5/16”
11/16”
2,310 lbs
GLO 101-I-P
5/32”
5/16”
11/16”
2,310 lbs
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
GLO 102-I
3/16”
3/8”
3/4”
3,300 lbs
GLO 102-I-P
3/16”
3/8”
3/4”
3,300 lbs
GLO 103-I
1/4”
7/16”
13/16”
3,960 lbs
GLO 103-I-P
1/4”
7/16”
13/16”
3,960 lbs
GLO 104-I
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 104-I-P
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 105-I
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 105-I-P
3/8”
13/16”
1-3/8”
12,540 lbs
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 101
5/32”
5/16”
11/16”
2,310 lbs
GLO 101-P
5/32”
5/16”
11/16”
2,310 lbs
GLO 102
3/16”
3/8”
3/4”
3,300 lbs
GLO 102-P
3/16”
3/8”
3/4”
3,300 lbs
GLO 103
1/4”
7/16”
13/16”
3,960 lbs
GLO 103-P
1/4”
7/16”
13/16”
3,960 lbs
GLO 104
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 104-P
5/16”
11/16”
1-1/4”
9,460 lbs
GLO 105
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 105-P
3/8”
13/16”
1-3/8”
12,540 lbs
GLO 106
1/2”
1”
1-9/16”
17,600 lbs
GLO 106-P
1/2”
1”
1-9/16”
17,600 lbs
Part #
Gloma
Flush Pin ‘D’ Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 603
1/4”
7/16”
13/16”
5,060 lbs
GLO 603-P
1/4”
7/16”
13/16”
5,060 lbs
Gloma
High Resistance ‘D’ Shackles
GLO 604
5/16”
5/8”
1-1/4”
9,020 lbs
GLO 604-P
5/16”
5/8”
1-1/4”
9,020 lbs
▪▪Specially treated to obtain a higher work load. Made in 17-4 Ph
▪▪Sold by the each, bulk or packaged (P)
GLO 605
3/8”
3/4”
1-7/16”
14,520 lbs
GLO 605-P
3/8”
3/4”
1-7/16”
14,520 lbs
GLO 606
1/2”
1”
1-5/8”
20,020 lbs
GLO 606-P
1/2”
1”
1-5/8”
20,020 lbs
Part #
Part #
GLO 103-HR
Sailing
Pin Dia.
Pin Dia.
Inside
Width
Inside
Length
Break Load
1/4”
7/16”
13/16”
5,720 lbs
GLO 103-HR-P
1/4”
7/16”
13/16”
5,720 lbs
GLO 104-HR
5/16”
11/16”
1-1/4”
10,340 lbs
GLO 104-HR-P
5/16”
11/16”
1-1/4”
10,340 lbs
GLO 105-HR
3/8”
13/16”
1-3/8”
16,500 lbs
GLO 105-HR-P
3/8”
13/16”
1-3/8”
16,500 lbs
Gloma
Extra Wide ‘D’ Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 502
3/16”
13/16”
1-7/16”
2,200 lbs
GLO 502-P
3/16”
13/16”
1-7/16”
2,200 lbs
GLO 503
1/4”
1”
1-11/16”
3,080 lbs
GLO 503-P
1/4”
1”
1-11/16”
3,080 lbs
GLO 504
5/16”
1-1/4”
2-1/4”
7,700 lbs
GLO 504-P
5/16”
1-1/4”
2-1/4”
7,700 lbs
GLO 505
3/8”
1-11/16”
2-3/4”
11,440 lbs
GLO 505-P
3/8”
1-11/16”
2-3/4”
11,440 lbs
Part #
297
Gloma
Gloma
Captive Pin, Twisted Shackles
Gloma
Long ‘D’ Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 201
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 201-P
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 202
3/16”
7/16”
1-5/8”
2,860 lbs
GLO 202-P
3/16”
7/16”
1-5/8”
2,860 lbs
GLO 203
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 203-P
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 204
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 204-P
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 205
3/8”
7/8”
2-7/8”
14,740 lbs
GLO 205-P
3/8”
7/8”
2-7/8”
14,740 lbs
Part #
Inside
Width
Inside
Length
Break Load
GLO 401-I
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 401-I-P
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 402-I
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 402-I-P
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 403-I
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 403-I-P
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 404-I
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 404-I-P
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 405-I
3/8”
13/16”
2-3/4”
10,340 lbs
GLO 405-I-P
3/8”
13/16”
2-3/4”
10,340 lbs
Gloma
Twisted Shackles
Gloma
Captive Pin, Long ‘D’ Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 201-I
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 201-I-P
5/32”
5/16”
1-5/16”
2,420 lbs
GLO 202-I
3/16”
3/8”
1-5/8”
2,860 lbs
GLO 202-I-P
3/16”
3/8”
1-5/8”
2,860 lbs
GLO 203-I
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 203-I-P
1/4”
1/2”
1-7/8”
4,400 lbs
GLO 204-I
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 204-I-P
5/16”
11/16”
2-3/8”
9,460 lbs
GLO 205-I
3/8”
7/8”
2-7/8”
14,740 lbs
GLO 205-I-P
3/8”
7/8”
2-7/8”
14,740 lbs
Part #
Pin Dia.
Part #
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 401
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 401-P
5/32”
5/16”
1-1/4”
1,760 lbs
GLO 402
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 402-P
3/16”
3/8”
1-1/2”
2,860 lbs
GLO 403
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 403-P
1/4”
1/2”
1-3/4”
4,620 lbs
GLO 404
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 404-P
5/16”
5/8”
2-1/4”
8,140 lbs
GLO 405
3/8”
13/16”
2-3/4”
10,340 lbs
GLO 405-P
3/8”
13/16”
2-3/4”
10,340 lbs
Part #
Sailing
298
Gloma
Gloma
Bow Shackles
Gloma
Captive Pin, Bow Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Part #
Pin
Dia.
Inside
W
Inside
Bow
Inside
Length
Break Load
GLO 301
5/32”
5/16”
5/8”
7/8”
1,980 lbs
Inside
Width
Inside
Bow
Inside
Length
Break Load
GLO 301-I
5/32”
5/16”
5/8”
7/8”
1,980 lbs
5/16”
5/8”
7/8”
1,980 lbs
11/16”
1”
2,640 lbs
GLO 301-P
5/32”
5/16”
5/8”
7/8”
1,980 lbs
GLO 301-I-P
5/32”
GLO 302
3/16”
3/8”
11/16”
1”
2,640 lbs
GLO 302-I
3/16”
3/8”
GLO 302-P
3/16”
3/8”
11/16”
1”
2,640 lbs
GLO 302-I-P
3/16”
3/8”
11/16”
1”
2,640 lbs
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303-I
GLO 303-P
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
GLO 303-I-P
1/4”
1/2”
13/16”
1-1/4”
3,960 lbs
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304-I
GLO 304-P
5/16”
5/8”
1”
1-5/8”
9,460 lbs
GLO 304-I-P
5/16”
5/8”
1”
1-5/8”
9,460 lbs
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305-I
GLO 305-P
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
GLO 305-I-P
3/8”
13/16”
1-3/16”
1-15/16”
13,640 lbs
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306-I
GLO 306-P
1/2”
1”
1-1/2”
2-1/8”
18,480 lbs
GLO 306-I-P
Gloma
Halyard Key Pin Shackles
with Fixed Pin
Gloma
High Resistance Bow Shackles
▪▪Specially treated to obtain a higher work load. Made in 17-4 Ph
▪▪Sold by the each, bulk or packaged (P)
Pin
Dia.
Inside
Width
Inside
Bow
Inside
Length
Break Load
GLO 304-HR
5/16”
5/8”
1”
1-5/8”
10,340 lbs
GLO 304-HR-P
5/16”
5/8”
1”
1-5/8”
10,340 lbs
GLO 305-HR
3/8”
13/16”
1-3/16”
1-15/16”
16,500 lbs
GLO 305-HR-P
3/8”
13/16”
1-3/16”
1-15/16”
16,500 lbs
Part #
Sailing
Pin
Dia.
Part #
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin
Dia.
Inside
Width
Pin to
Pin
Eye
Break
Load
GLO 823-B1
3/16”
1/2”
13/16”
5/8”
1,980 lbs
GLO 823-B1-P
3/16”
1/2”
13/16”
5/8”
1,980 lbs
GLO 823-B2
1/4”
9/16”
7/8”
1-1/16”
2,860 lbs
GLO 823-B2-P
1/4”
9/16”
7/8”
1-1/16”
2,860 lbs
GLO 823-B3
5/16”
3/4”
1-3/16”
1”
5,500 lbs
GLO 823-B3-P
5/16”
3/4”
1-3/16”
1”
5,500 lbs
Part #
Gloma
Key Pin Shackles
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Pin Dia.
Inside
Width
Inside
Length
Break Load
GLO 823-1
3/16”
1/2”
1-1/2”
2,420 lbs
GLO 823-1-P
3/16”
1/2”
1-1/2”
2,420 lbs
GLO 823-2
1/4”
9/16”
1-9/16”
3,080 lbs
GLO 823-2-P
1/4”
9/16”
1-9/16”
3,080 lbs
GLO 823-3
5/16”
13/16”
2-3/8”
5,720 lbs
GLO 823-3-P
5/16”
13/16”
2-3/8”
5,720 lbs
Part #
Gloma
299
Gloma
Snap Shackles with Ring
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Length
Eye Dia.
Break Load
GLO 1101
Part #
2-5/8”
7/16”
2,200 lbs
GLO 1101-P
2-5/8”
7/16”
2,200 lbs
GLO 1102
3-5/8”
9/16”
3,300 lbs
GLO 1102-P
3-5/8”
9/16”
3,300 lbs
Gloma
Eye Straps
▪▪Forged 316 stainless steel
▪▪Sold by the each, bulk or packaged (P)
Part #
Inside Width
Inside Height
Hole Size
GLO 702
3/8”
1/2”
3/16”
GLO 702-P
3/8”
1/2”
3/16”
GLO 703
1/2”
9/16”
1/4”
GLO 703-P
1/2”
9/16”
1/4”
GLO 704
5/8”
3/4”
5/16”
GLO 704-P
5/8”
3/4”
5/16”
Gloma
Webbing Eye Straps
▪▪Forged 316 stainless steel
▪▪Sold by the each, packaged
Part #
Inside Width
Hole Size
GLO 901-P
30 mm
5,6
GLO 902-P
40 mm
5,6
► Also See
Gloma Anchor Swivel pg 195
Sailing
300
Harken
Harken forged stainless shackles. Now the high quality shackles which have been used on Harken blocks are
available separately, in a large range of configurations and sizes. These shackles are electric forged out of 316
stainless steel and polished to a high lustre. Safe working loads are no more than half the minimum breaking strength.
Harken D Shackles (316 Stainless)
Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2108
6mm
1/4”
3/4”
9/16”
1,650 lbs
3,300 lbs
HAR 2115
8mm
5/16”
1”
11/16”
3,040 lbs
6,080 lbs
HAR 2122
10mm
13/32”
1-1/4”
13/16”
4,870 lbs
9,740 lbs
HAR 2123
10mm
13/32”
1-1/4”
13/16”
8,210 lbs
16,420 lbs
HAR 2126
12mm
1/2”
1-1/2”
15/16”
7,120 lbs
14,240 lbs
Harken Bow Shackles (316 Stainless)
Part #
Size
Shackle Pin
HAR 2103
5mm
3/16”
HAR 2110
6mm
1/4”
A
B
C
SWL
Breaking Strength
1”
3/8”
11/16”
1,190 lbs
2,380 lbs
1-1/16”
9/16”
3/4”
1,650 lbs
3,300 lbs
HAR 2117
8mm
5/16”
1-1/2”
11/16”
1-1/8”
3,040 lbs
6,080 lbs
HAR 2124
10mm
13/32”
1-7/8”
7/8”
1-1/4”
4,870 lbs
9,740 lbs
Harken Shallow Bow Shackles (316 Stainless)
Size
Shackle Pin
A
B
C
SWL
Breaking Strength
HAR 2131
Part #
4mm
5/32”
5/8”
5/16”
7/16”
810 lbs
1,620 lbs
HAR 2132
5mm
3/16”
11/16”
7/16”
9/16”
1,190 lbs
2,380 lbs
Harken Long Shackles (316 Stainless)
Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2104
5mm
3/16"
1-1/2"
3/8"
1,190 lbs
2,380 lbs
HAR 2111
6mm
1/4”
1-3/4”
1/2”
1,650 lbs
3,300 lbs
HAR 2118
8mm
5/16”
2-1/4”
5/8”
3,040 lbs
6,080 lbs
Harken Large Opening Shackles (316 Stainless)
Part #
Sailing
HAR 2106
Size
Shackle Pin
A
B
SWL
Breaking Strength
5mm
3/16”
1-5/16”
13/16”
770 lbs
2,200 lbs
Harken Folding Pad Eyes
For applications serving as temporary or permanent attachment points for
blocks, lashings, and tie downs. These hinged fittings are ready when you
need to attach a snatch block or fender, but fold flat onto the deck, keeping it
clear and protecting your toes when you don’t. A vulcanized thermoplastic pad
prevents rattling and vibration.
▪▪ Investment-cast bolt-down bases and forged D-rings are 316 stainless steel
Part #
A
B
HAR 3206
1”
1-5/8"
HAR 3207
1-7/8"
1-5/8"
C
D
E
F
Max WL
Max Breaking
7/8"
-
19/32"
1-1/8"
1,760 lbs
3,250 lbs
1-1/8"
15/16"
19/32"
1-1/8"
3,080 lbs
2,800 lbs
3206
3207
301
Harken
Harken Twist Shackles (316 Stainless)
Part #
Size
Shackle Pin
A
B
SWL
Breaking Strength
HAR 2105
5mm
3/16”
1-7/16”
3/8”
1,190 lbs
2,380 lbs
HAR 2112
6mm
1/4”
1-1/8”
1/2”
1,650 lbs
3,300 lbs
HAR 2119
8mm
5/16”
1-5/8”
11/16”
3,040 lbs
6,080 lbs
HAR 2125
10mm
13/32”
1-7/8”
3/4”
4,870 lbs
9,740 lbs
Harken Captive Halyard Shackles (316 Stainless)
Part #
HAR 2107
Size
Shackle Pin
A
B
SWL
Breaking Strength
5mm
3/16"
1-3/8"
9/16"
1190 lbs
2,380 lbs
Harken Stainless Steel Shackles (316 Stainless)
Part #
Shackle Pin
A
B
SWL
Breaking Strength
HAR 072
3/16"
1/2"
7/16"
1,250 lbs
2,500 lbs
HAR 138
1/4"
11/16"
5/8"
1,500 lbs
3,000 lbs
HAR 246
5/32"
7/16"
3/8"
600 lbs
1,200 lbs
HAR 1584
5/16"
3-1/16"
1,800 lbs
3,600 lbs
HAR 093
3/16"
1/2"
1,250 lbs
2,500 lbs
Stamped Shackles
072/138/246
Snap Shackles
-
1584
U-Adapters
7/16"
093
Harken Eye Straps (316 Stainless)
Part #
HAR 2133
A
B
C
D
E
1-3/16”
3/4”
1-1/2”
3/8”
F
9/16”
Fastener
Breaking
Strength
#10
2,500 lbs
3/8”
Harken Eye Straps (316 Stainless)
073/201/445
Eyestraps are useful accessories. They form light-duty mounting bases for
blocks, serve as lash-down points and can be used for fairleads.
Part #
A
B
C
D
E
F
074
Fastener
Breaking
Strength
1-11/16”
1/2”
1-1/4”
7/16”
3/8”
7/16”
#10
1,600 lbs
HAR 074
3-1/4”
3/4”
1-1/2”
5/8”
5/8”
9/16”
1/4”
4,000 lbs
HAR 201
1-7/8"
3/8"
1-1/2"
9/16"
1/4"
7/16"
#10
1,600 lbs
HAR 445
1-1/2"
3/8"
1-1/16"
7/16"
3/8"
7/16"
#8
1,000 lbs
Sailing
HAR 073
Harken Pad Eyes (316 Stainless)
Pad eyes are great for mounting blocks and are also used as attachment points for staysails, reefing
blocks, and hundreds of other items. The diamond shaped padeyes are 316 stainless and are often
used at mast bases where the diamond shape allows them to be mounted very close together.
Part #
A
B
C
D
E
F
G
Max SWL
Max Breaking
HAR 688
3-1/8"
2"
2-3/8"
1-1/4"
1-3/16"
9/16"
7/8"
5,000 lbs
10,000 lbs
HAR 689
3-7/8"
2-5/16"
2-7/8"
1-3/8"
1-9/16"
7/8"
1-1/16"
8,000 lbs
17,200 lbs
302
Harken
Lead Rings
LEAD RINGS
Q&A
Harken Lead Rings are simple, weight-saving devices used to
route line for jib in-haulers, twings, barberhaulers, lazy jacks,
cascading backstays and other applications requiring minimal
fine-tune adjustments. Rings are Hard Lube-anodized 6061T6 aluminum for a smooth, slippery surface. With no moving
parts, wear is minimal.
I’M THINKING OF USING HARKEN
LEAD RINGS TO ADJUST MY VANG.
WHAT ARE YOUR THOUGHTS?
Lead Rings come in five sizes with 8, 10, 14, 20, and
28 mm holes.
Part
No.
3269
3270
3271
3272
3273
Center hole
Ø
in
mm
5
/16
8
7/16
10
9/16
14
7/8
20
11/8
28
Description
Lead ring
Lead ring
Lead ring
Lead ring
Lead ring
3270
3271
Sailing
3269
Outer groove
width
in
mm
3
/16
5
1/4
6
7/16
10
9/16
14
7/8
20
Bleizig 2, Pogo 30, Pogo Structures, Finot-Conq design, 9.14 m (30') — Pogo Structures photo
106
Weight
oz
.093
.155
.414
1.34
3.70
g
2.65
4.40
11.75
37.85
105
3272
Harken Lead Rings should only
be used for applications with
high static loads, where trimming
angles aren’t acute, or where only
minor adjustments are needed.
They will definitely save you
weight in your vang system,
but you’ll be adding friction to
the line compared to freerunning ball bearing blocks.
3273
303
Harken
NEW
Jib Leads & Fairleads
Bolt-Down Fairleads
Harken Bolt-Down Fairleads are used as shallow-angle line deflectors
on boats 6 to 15 m (20 to 50 ft). These weight-saving fairleads
are built of 6061-T6 Hard Lube-anodized aluminum for durability.
Smooth surfaces and radiused center holes minimize line wear.
A
Bolt-Down Fairleads are available in single, double, and triple
configurations with 12 or 16 mm hole sizes.
Grand Prix Jib Leads
TECH TIP
Fastener spacing
Hex-head bolts are ideal for oneperson through-deck fastening as
the hexagonal head is held securely
by the sides of the inset when being
tightened.
Strong aluminum jib leads deflect jib sheets to winches, preventing
overrides. These jib leads have two small drilled holes through
which a loop can be spliced to attach the hobble. This temporarily
secures the jib/genoa clew to free-up a winch for mark roundings.
3275
3274
3276
3277
3278
3279
Part
No.
Description
Length
in
mm
Width
in
mm
Height
in
mm
Max line Ø
in
mm
/
/
11/16
7/8
7
/8
7/8
11/8
11/8
11/8
11/4
11/4
11/4
/
/
3/8
9/16
9
/16
9/16
Weight
oz
g
Fasteners*
in
mm
A
mm
Maximum
working load
lb
kg
Breaking load
lb
kg
/
/
1/4
5/16
5
/16
5/16
32.0
57.4
82.8
37.0
67.5
98.0
2000
2000
2000
4000
4000
4000
4000
4000
4000
8000
8000
8000
Bolt-Down Fairlead
3274
3275
3276
3277
3278
3279
Single/12 mm hole
Double/12 mm hole
Triple/12 mm hole
Single/16 mm hole
Double/16 mm hole
Triple/16 mm hole
17/8
27/8
37/8
23/8
39/16
43/4
48
74
99
60
91
121
11 16
11 16
18
18
18
22
22
22
28.2
28.2
28.2
31.8
31.8
31.8
3 8
3 8
10
10
10
14
14
14
.99
1.73
2.43
1.66
2.82
3.95
28
49
69
47
80
112
1 4
1 4
6
6
6
8
8
8
908
908
908
1816
1816
1816
1816
1816
1816
3632
3632
3632
Jib lead
7/8
3280 Midrange
215/16
75
125
11/8
3281 Big Boat
415/16
*HH, SH, CH in 6 mm, 5/16" and 8 mm. Size 1/4" in SH only.
1/2
1/4
22
17/16
37
12
2.97
84
6
55.0
1500
680
3000 1360
7/8
7/16**
29
25/16
58
22
9.72
276
10*** 96.0
4250 1930 8500 3860
**7/16" in HH and SH. ***10 mm in HH, SH and CH. DO NOT use Harken equipment for human suspension.
107
Sailing
3280
3281
J/70 — J/Boats Inc. photo
304
Harken
Loading Formulas
Block Loading vs Angle of Deflection
Load on a block is a combination of the load on the line passing
through the block, plus a block-loading factor, which is determined
by the angle by which the block turns the sheet. For example, a footblock that turns a sheet 180-degrees will see a load equal to twice
the load on the sheet. A deck organizer, which turns a halyard only
30-degrees, will see just 52 percent of the load on the halyard.
Boat Type
Most load formulas assume a medium displacement monohull, but
you can easily correct for other boat types. Multihulls and boats with
canting keels or water ballast have great form stability and speed
and will often carry sails very high in the apparent wind speed, so
calculations must be done with this wind speed in mind. ULDBs are
typically tender and often change sails or reef quite early, so loading
may be done at relatively low wind speeds. For example, a modern
trimaran may carry its blade jib in 25 knots of wind at speeds over
15 knots for an apparent wind of nearly 40 knots, whereas a ULDB
will probably remove its #1 genoa at about 15 knots of apparent wind.
Angle of
deflection
30°
45°
60°
75°
Load
factor
52%
76%
100%
122%
Angle of
deflection
90°
105°
120°
135°
Load
factor
141%
159%
173%
185%
Angle of
deflection
150°
160°
180°
Load
factor
193%
197%
200%
Genoa System Loading
Because wind speed is squared, it is the most important variable and
can greatly influence loading. Wind speed (the apparent wind) should be
calculated for the specific sail being analyzed. For example, the #1 genoa
on a 25 ft (7 m) boat might only be carried in 15 knots of wind while the
#3 blade on a Maxi-boat could well be carried in 40 knots.
To calculate loading on a genoa lead car, multiply sheet load by the load
factor of the sheet. Most #1 genoas will deflect about 45-degrees, while
a #3 genoa may deflect 75-degrees or more.
Genoa Sheet Load
English
Metric
SL = SA x V2 x 0.00431
SL = SA x V2 x 0.02104
SL
Sheet load in pounds
SL
Sheet load in kilograms
SA
Sail area in square feet
SA
Sail area in square meters
V
Wind speed in knots
V
Wind speed in knots
Lead car adjuster tackle load is dependent on the angle of deflection
of the sheet in the lead car, but is generally assumed to be .3 of lead
car load when deflection is 45-degrees and .5 of lead car load when
deflection is 60-degrees.
Mainsheet System Loading
The formula for mainsheet loading is not as widely accepted as that
for genoa sheet loads and should only be used as a rough guide for
offshore boats from 30 ft to 60 ft (9 m to 18 m).
Traveler car adjuster load is generally considered to be .2 times
car load.
.2 x Car Load
.5 x Car Load
.3 x Car Load
Mainsheet Load
English
Metric
ML = E2 x P2 x 0.02104 x V2
ML = E2 x P2 x 0.00431 x V2
( P2 + E2) x (E - X)
( P2 + E2) x (E - X)
ML Mainsheet load in pounds
ML Mainsheet load in kilograms
E Foot length of main in feet
E Foot length of main in meters
P Luff length of main in feet
P Luff length of main in meters
V Wind speed in knots
V Wind speed in knots
Distance from aft end of boom to
Distance from aft end of boom to
X
X
mainsheet attachment point in feet
mainsheet attachment point in meters
Sailing
Rig Dimensions
The following abbreviations are often used to describe various measurements on a sailboat. Precise
technical definitions exist for each abbreviation, but the following is a list of simple descriptions:
LOA Length Overall - overall tip-to-tip length of the boat
I2
LWL Length Waterline - length of waterline of the boat
J
Design Waterline - theoretical waterline length of boat
as opposed to LWL, which is actual waterline length
BMX Beam Maximum - width of the boat at the widest point
BWL Beam Waterline - widest beam of boat at the waterline
I
Height of the foretriangle measured from the top of the
highest sheave to the sheerline
DWL
28
Height of staysail halyard above deck
Base of the foretriangle measured from the front of the
mast to the intersection of the forestay and deck
J2
Base of staysail triangle
P
E
Luff length of the mainsail
Foot length of the mainsail
LP
Shortest distance from headstay to the clew of the jib
P
I
E
J
2
J
I
2
Harken
U
Photo ©
m Sperr
g Tea
S Sailin
ide
y Top-S
k
ingpix.d
on / sail
Anders
r / Mick
www.harken.com/T2-Ratchamatic
MADE
IN USA
306
Harken
NEW
2161
T2
Soft-Attach Blocks
Harken offers these patent-pending, high-strength,
soft-attach blocks in 18 to 57 mm sizes. The 18 mm
block features stainless steel ball bearings and an
integrated stainless inner race and rivet for optimal
strength-to-weight. The 29, 40, and 57 mm blocks
feature composite sheaves that spin freely on Delrin®
ball bearings with curved bearing races. They have
no metal shackles or rivets, making them the lightest
soft-attach blocks Harken has ever designed.
2161
All T2 blocks are lashed or spliced through the loadbearing center of the block, decreasing the loads on
the sideplates and acting as a safety backup for the
system. Use for traveler controls, mainsheets and
vangs, cascades, bridles, and other systems where
small lightweight blocks are called for.
2698
T2 block with open center
Line ties, splices, or lashes to almost
anything: cascades, bridles, traveler
controls.
2146
2149
2152
T2 Loop block with anchor post
Loops deadend on anchor post
for easy installation. No knots
or splices needed.
2158
T2 Loop Blocks
The T2 Loop block's on/off loop system slides
through the block head and over the anchor post
for a secure connection. A SK75 Dyneema® loop
is included. Replacement loops available.
T2 Blocks
T2 blocks come in single and double configurations
and can be tied, spliced, or lashed to almost anything.
T2 doubles feature composite line guides that
are integrated into the block head. They keep the
block aligned correctly by pushing the lashing line
to the outer edges of the block's head.
2148
2151
2147
2150
2153
A length of Spectra® line with a polyester
cover is included.
Slide the loop through the head and
over the anchor post for a secure
connection.
Use the 2161 “tight cinching” 18 mm
in applications where the block
needs to be secured extremely
close to the deck.
Sailing
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates.
Dyneema is a registered trademark of DSM Dyneema.
Spectra is a registered trademark of Honeywell International, Inc.
Sheave
Ø
Part
No.
Description
2698
2146
2149
2152
2161
2158
2147
2150
2153
Length
Weight
Max line
Ø
in
mm
Maximum
working load
lb
kg
in
mm
in
mm
oz
g
Single
Single
23/32
11/8
18
29
11/8
111/16
28
.25
0.4
7.2
12
3 16
/
5/16
5
8
275
330
Single
Single
Single
Double
Double
Double
Double
19/16
21/4
23/32
23/32
11/8
19/16
21/4
40
57
18
18
29
40
57
21/4
31/16
11/8
11/8
111/16
21/4
31/16
57
79
0.9
2
.25
0.6
.83
1.7
3.8
25
57
7.2
17
23.5
48
107.5
/
/
3/16
3/16
5/16
3/8
7/16
10
11
5
5
8
10
11
26
59
7 16
/8
/
10
11
Breaking
load
lb
kg
125
150
992
1000
450
454
485
792
275
450
600
700
1080
220
359
125
204
272
317
490
1200
2380
992
1500
1900
2100
3200
544
1080
450
680
861
952
1451
485
792
220
359
1200
2380
544
1080
T2
43
28
28
43
57
79
3 8
7 16
T2 Loop
2148 Single*
2151 Single**
*Includes 2154 loop.
40
19/16
40
21/4
57
0.9
57
31/16
79
2
21/4
**Includes 2155 loop. Replacement loops see page 105.
3
307
Harken
NEW
Carbo T2
Soft-Attach Ratchamatic
The patent-pending T2 Ratchamatic is Harken’s newest block to feature
the T2 line’s styling and soft-attachment system.
The weight of this high-strength block is only a few ounces. This is thanks
to composite fiber-reinforced sideplates, hardcoat-anodized aluminum sheave,
a lightweight soft-attach, and a minimum of moving parts in the ratcheting
mechanism. All T2 blocks are lashed or spliced through the load-bearing center
of the block, decreasing the loads on the sideplates and acting as a safety backup
for the system. Lashing allows ratchet adjustment close to the deck. Splicing with a
large diameter line uses the tail to fasten the block at the height needed for a fair lead.
Pressure on the line engages the ratchet mechanism, which switches seamlessly
from free-running to ratchet mode. Unloaded main and jib sheets run out freely
during mark roundings, and asymmetrical spinnaker sheets free instantly during
jibes. T2 Ratchamatic blocks are clearly labeled with high-contrast directional
markers for correct reeving and trimming direction.
Pressure on the line reeved through the
center engages the ratchet mechanism.
Use for mainsheet and spinnaker systems on beachcats, dinghies, and sportboats.
A length of Spectra® line with a polyester cover is included.
Spectra is a registered trademark of Honeywell International, Inc.
2160
2159
Sailing
Lashing secures the block close to the
deck and keeps the block from capsizing.
Finn © US Sailing Team Sperry Top-Sider/Mick Anderson photo
Part
No. Description
Sheave
Ø
in
mm
Length
in
mm
Weight
oz
g
Max line
Ø
in
mm
Maximum
working load
lb
kg
Breaking
load
lb
kg
Holding power
w/180° wrap
50 lb (23 kg)
40 mm
2159 Single
19/16
40
21/4
57
.90
25
3 8
/
10
300
136
1000
454
10:1
21/4
57
31/16
79
2.5
71
3 8
/
10
500
227
2000
907
10:1
57 mm
2160 Single
41
308
Harken
29 mm Blocks
342
341
340
The compact 29 mm Carbo block is extremely strong.
Use as a mainsheet block on small dinghies such as the
Optimist, or for low-friction control blocks on any size boat.
Doubles and triples feature U-Locks to hold the swivel
in front/side position, or to let it spin freely. The triple’s
compact cam arm supports high-load purchases of 5:1
or 6:1. The line-shedding cheek block features a small
mounting footprint and drain holes.
343
High-strength pivoting lead blocks with cams are used
for halyard controls on larger keelboats and as “headknockers” on dinghies and beachcats for sheeting
directly from the boom. Hole spacing and rivet size
are the same as Classic models, making upgrades
easy. Cam reverses for either up or down cleating.
Use for:
Outhauls
Cunninghams
Vangs
Traveler controls
Barberhaulers
Flag halyards
345
344
347
346
353
349
30 mm
13/16"
352
350
The double and triple swivel blocks
can lock in two directions or swivel.
Use as becket block without the
additional height of a becket.
348
32 mm
11/4"
371
381
395
396
Sailing
Cam cleats reverse for up or down
engagement/disengagement.
42
Sheave
Weight
Shackle pin
Ø
Length
w/shackle
Ø
Part
No. Description
in
mm
in
mm
oz
g
in
mm
5
29
25/8
66
0.9
26
/32
4
340 Single/swivel
11/8
5/32
29
31/16
78
1.0
28
4
341 Single/swivel/becket
11/8
3/16
29
27/8
73
1.8
51
5
342 Double/swivel
11/8
3/16
29
33/8
85
1.9
54
5
343 Double/swivel/becket
11/8
3/16
344 Triple/swivel
11/8
29
27/8
73
2.6
74
5
3/16
29
33/8
85
2.7
77
5
345 Triple/swivel/becket
11/8
3/16
29
27/8
73
4.6
130
5
346 Triple/471 Carbo-Cam**
11/8
3/16
347 Triple/471 Carbo-Cam/becket**
11/8
29
33/8
85
4.7
133
5
29
115/16
49
0.8
23
—
—
348 Single/fixed*
11/8
29
23/16
56
1.1
31
—
—
349 Stand-up/fixed*
11/8
350 Cheek
11/8
29
21/8
53
0.6
17
—
—
29
21/16
52
0.9
26
—
—
352 90° fixed head*
11/8
29
35/8
92
1.2
34
—
—
353 Traveler
11/8
29
47/8
124
1.8
51
—
—
371 Clew block assembly
11/8
29
21/8
54
1.2
34
—
—
381 Double/fixed
11/8
29
315/16
100
3.2
90.7
—
—
395 Pivoting lead block/468 Cam-Matic**
11/8
29
315/16
100
2.96
83.7
—
—
396 Pivoting lead block/471 Carbo-Cam**
11/8
*Can be used as becket block. **Maximum working loads and breaking loads for blocks based on cam strengths.
Max line
Ø
in
mm
5
/16
8
5/16
8
5/16
8
5/16
8
5/16
8
5/16
8
1/4
6
1/4
6
5/16
8
5/16
8
5/16
8
5/16
8
5/16
8
5/16
8
5/16
8
1/4
6
1/4
6
Maximum
working load
lb
kg
330
150
330
150
660
299
660
299
990
449
990
449
750
340
900
408
330
150
330
150
330
150
330
150
330
150
330
150
660
299
200
91
150
68
Breaking
load
lb
kg
1000
454
1000
454
1625
737
1625
737
2000
907
2000
907
1500
680
1800
816
1000
454
1000
454
1000
454
1000
454
1000
454
1000
454
1625
737
650
295
650
295
309
Harken
40 mm Carbo®
Carbo® AirBlocks® are 60% stronger and 30% lighter than
our Classic blocks. Use the 40 mm Carbo for jib and mainsheet
systems on high-performance dinghies and for loaded control
lines on small keelboats.
The nylon-resin sideplates are densely packed with long-glass
fibers for a compact block with a high strength-to-weight ratio.
Sheaves spin on high-load ball bearings with fitted races for
low-friction operation. Ball bearings, sheave, and sideplates
are UV-stabilized for maximum protection.
Reversible cam arms
High-strength pivoting lead blocks with cams are used for
halyard controls on larger keelboats and as “head knockers”
on dinghies and beachcats for sheeting directly from the
boom. Hole spacing and rivet size are the same as Classic
models, making upgrades easy. Cam reverses for either
up or down cleating.
Use for:
Main/jib sheets
Mainsheet fine-tune
Control lines
Vangs
Cunninghams
Outhauls
11/2"
38 mm
2636
2637
Use as becket block without the
additional height of a becket.
2644
2649
2645
2646
2652
2650
2659
Part
No.
2636
2637
2644
2645
2646
2649
2650
2652
2659
Description
Single/swivel
Single/swivel/becket
Cheek
Single/swivel/471 Carbo®-Cam®**
Single/swivel/471 Carbo®-Cam®/becket**
Traveler
Single/fixed*
Stand-up/fixed*
90° Fixed head*
*Can be used as becket block
Sheave
Ø
in
mm
40
19/16
40
19/16
19/16
40
19/16
40
19/16
40
40
19/16
40
19/16
40
19/16
40
19/16
Length
in
mm
33/8
86
4
102
23/4
70
33/8
86
4
102
41/4
108
21/2
64
23/4
70
215/16
75
Weight
w/shackle
oz
g
1.6
44
1.7
48
1.2
34
4.2
119
4.3
122
1.8
52
1.4
40
1.7
48
1.6
44
Shackle pin
Ø
in
mm
5/32
4
5/32
4
—
—
5/32
4
5
/32
4
—
—
—
—
—
—
—
—
**Maximum working loads and breaking loads for blocks based on cam strengths
Max line
Ø
in
mm
3/8
10
3/8
10
3
/8
10
1/4
6
1
/4
6
5/16
8
3/8
10
3/8
10
3/8
10
Maximum
working load
lb
kg
485
220
485
220
485
220
150
68
300
136
330
150
485
220
485
220
485
220
Sailing
Actual Size
11/4"
32 mm
Breaking
load
lb
kg
1620
735
1620
735
1620
735
300
136
600
272
1000
454
1620
735
1620
735
1620
735
41
310
Harken
40 mm Blocks
2156
2640
2638
2157
2641
2642
2639
2643
2647
2648
2654
Sailing
Optimistic, X.O., 7.5 m, Chantier des Ileaux — Jérémie Govin photo
44
Sheave
Weight
Shackle pin
Ø
Length
w/shackle
Ø
Part
No. Description
in
mm
in
mm
oz
g
in
mm
40
41/2
112
6.6
186
—
—
2156 Pivoting lead block/150 Cam-Matic* **
19/16
40
41/2
112
5.5
157
—
—
2157 Pivoting lead block/365 Carbo-Cam* **
19/16
3
2638 Double/swivel
19/16
40
311/16
94
3.2
86
/16
5
3/16
2639 Double/swivel/becket
19/16
40
45/16
110
3.4
90
5
3/16
40
311/16
94
4.6
118
5
2640 Triple/swivel
19/16
3/16
40
45/16
110
4.7
122
5
2641 Triple/swivel/becket
19/16
3/16
40
31/2
89
2.8
80
5
2642 Double/fixed
19/16
3/16
40
43/16
106
2.9
84
5
2643 Double/fixed/becket
19/16
3/16
40
311/16
94
8.2
232
5
2647 Triple/swivel/471 Carbo-Cam**
19/16
3
40
45/16
110
8.3
235
/16
5
2648 Triple/swivel/471 Carbo-Cam/becket**
19/16
3/16
40
311/16
94
6
170
5
2654 Quad/swivel
19/16
*Can be used as becket block. **Maximum working loads and breaking loads for blocks based on cam strengths.
Max line
Ø
in
mm
3/8
10
3/8
10
3
/8
10
3/8
10
3/8
10
3/8
10
3/8
10
3/8
10
1/4
6
1
/4
6
3/8
10
Maximum
working load
lb
kg
300
136
200
91
970
440
970
440
1455
660
1455
660
970
440
970
440
750
340
900
408
1455
660
Breaking
load
lb
kg
950
430
950
430
2380 1080
2380 1080
3050 1383
3050 1383
2380 1080
2380 1080
1500
680
1800
816
3050 1383
311
Harken
Harken 57 mm & 75 mm Carbo Blocks
The nylon resin side plates are densely packed with long-glass fibres for a compact
block with a high strength-to-weight ratio. Ball bearings, sheave and side plates
UV stabilized with black additive for maximum protection.
Blocks feature Cam-Lock or U-Lock locking systems to lock the shackle in front
or side positions, or swivel to keep line from twisting.
The high-load 57mm Carbo has a broad working range. Use for main and jib
sheets on centreboard and keelboats like Lightnings, Dragons, Solings, J/24s and
for mainsheet systems on catamarans.
▪▪Use for:
▪▪Main/jib sheets
▪▪Mainsheet fine-tune
▪▪Control lines
▪▪Vangs
▪▪Cunninghams
▪▪Outhauls
2617
2616
2600
2602
2604
2606
2621
2601
Part #
2603
Description
2618
2615
2605
Length
2622
Max.
Line
Max
Working
Load lbs
Breaking
Load lbs
HAR 2600
57mm/Single/Swivel
4-5/16”
7/16”
792
2380
HAR 2601
57mm/Single/Swivel/Becket
5-3/16”
7/16”
792
2380
HAR 2606
57mm/Cheek
3-5/8”
7/16”
792
2380
HAR 2615
57mm/Single/Swivel/150 Carbo-Cam**
4-5/16”
7/16”
136
750
HAR 2616
57mm/Single/Swivel/Becket/150 Carbo-Cam**
5-3/16”
7/16”
600
1500
HAR 2602
57mm/Double/Swivel
4-3/4”
7/16”
1584
3300
HAR 2603
57mm/Double/Swivel/Becket
5-5/8”
7/16”
1584
3300
HAR 2604
57mm/Triple/Swivel
4-3/4”
7/16”
2380
5000
HAR 2605
57mm/Triple/Swivel/Becket
5-5/8”
7/16”
2380
5000
HAR 2617
57mm/Triple/Swivel/150 Carbo-Cam**
4-3/4”
7/16”
1500
3750
HAR 2618
57mm/Triple/Swivel/Becket/150 Carbo-Cam**
5-5/8”
7/16”
1800
4500
HAR 2621
57mm/Carbo Fiddle Block
6”
7/16”
792
2380
HAR 2622
57mm/Carbo Fiddle Block w/Becket
6-7/8”
7/16”
792
2380
57mm/Carbo Fiddle Block w/Cam
6”
7/16”
792
2380
HAR 2624
57mm/Carbo Fiddle Block w/Cam, Becket
6-7/8”
7/16”
792
2380
HAR 2673
75mm/Ratchet
4-5/8"
3/16"
793
2380
HAR 2674
75mm/Ratchet/Becket
5-5/8"
3/16"
793
2380
HAR 2675
75mm/Ratchet/150 Cam-Matic
4-5/8"
3/16"
793
2380
HAR 2676
75mm/Ratchet/150 Cam-Matic/Becket
5-5/8"
3/16"
793
2380
HAR 2690
75mm
6-3/16"
1/4"
550
3637
HAR 2691
75mm/Becket
7-7/16"
1/4"
550
3637
HAR 2692
75mm/150 Cam-Matic**
6-3/16"
1/4"
550
3637
HAR 2693
75mm/150 Cam-Matic/Becket**
7-7/16"
1/4"
550
3637
HAR 2697
75mm/Ratchet/150 Cam-Matic/Becket**
7-7/16"
1/4"
550
3637
2673
2624
2674
2675
2676/2697
Sailing
HAR 2623
2623
2690
2691
**Safe working loads and breaking strengths are based on cam strengths
2692
2693
312
Harken
Harken 75 mm Carbo Blocks
The nylon resin side plates are densely packed with long-glass
fibres for a compact block with a high strength-to-weight ratio. Ball
bearings, sheave and side plates UV stabilized with black additive
for maximum protection.
Blocks feature Cam-Lock or U-Lock locking systems to lock
the shackle in front or side positions, or swivel to keep line from
twisting.
Curved bearing race fit ball for more
ball-to-race contact. Disperses load
for higher strength, smaller block
Designed with high-tech, long
glass fibres and nylon material
for higher strength to weight
ratio. Eliminates heavy stainless
sideplates
The 75 mm Carbo has a safe working load of 1200 lbs (500 kg). It
releases easily under load and is perfect for mainsheet systems on
sport boats like the Melges 24, J/105 and Henderson 30.
▪▪Use for:
▪▪Main/jib sheets
▪▪Mainsheet fine-tune
▪▪Control lines
▪▪Vangs
▪▪Cunninghams
▪▪Outhauls
2661
2662
2663
Description
Length
Max.
Line
SWL
lbs
Breaking
Strength lbs
HAR 2660
Carbo Single
5-3/8”
9/16”
1213
3638
HAR 2661
Carbo Single w/Becket
6-1/2”
9/16”
1213
3638
Part #
HAR 2662
Carbo Double
6”
9/16”
2426
6000
HAR 2663
Carbo Double w/Becket
7”
9/16”
2426
6000
HAR 2664
Carbo Triple
6”
9/16”
3639
10000
HAR 2665
Carbo Triple/Becket
7”
9/16”
3639
10000
HAR 2668
Carbo Triple w/Cam**
6”
1/2”
1500
3750
HAR 2669
Carbo Triple w/Cam & Becket**
7”
1/2”
1800
4500
**Safe working loads and breaking strengths are based on cam strengths
Sailing
2660
2664
2665
2668
2669
313
Harken
Harken 40 mm Carbo Ratchets
▪▪Jib/spinnaker sheets Mainsheet 2:1 foreguy
Mainsheet fine-tune Traveler control Genoa lead
These small ratchets are ideal for jib sheets and spinnakers
on small dinghies where size and weight are critical. Eightfaceted machined aluminum sheave holds line securely.
Hardkote anodizing provides durability.
2608, 2609 and 2614 have on/off switch; others are in
constant ratchet mode.
2608
2609
Description
Length
Max.
Line
SWL
lbs
Breaking
Strength lbs
HAR 2608
Ratchet Block
3-3/8”
3/8””
300
1000
HAR 2609
Ratchet Block w/Becket
4”
3/8”
300
1000
HAR 2610
Ratchet Block w/Cam**
3-3/8”
1/4”
150
300
HAR 2611
Ratchet w/Cam & Becket**
4”
1/4”
300
600
HAR 2612
Triple Ratchet w/Cam**
3-11/16”
3/16”
750
1500
HAR 2614
Ratchet Cheek Block
2-3/4”
3/8”
300
1000
Part #
2610
2611
2612
2614
**Safe working loads and breaking strengths are based on cam strengths
Harken 57 mm & 75 mm Carbo Ratchets
▪▪Main/jib sheets
Spinnaker sheets
Traveler controls
Foreguys
Hand hold loaded lines and control release using 57 and 75 mm
Carbo Ratchets. Machined aluminum sheaves have eight facets to
hold line securely. The 75 mm provides up to 15:1 holding power
and the 57 mm 10:1.
2135
Choose switchable ratchets for on/off control. For the ultimate
system mount a switchable ratchet in the cockpit and a boommounted Ratchamatic directly above to allow double holding power
in heavy air and to ensure the mainsheet runs freely in light air.
2136
Description
Length
Max.
Line
SWL
lbs
Breaking
Strength lbs
HAR 2135
57mm Carbo Ratchet
4-1/16”
3/16”
500
2000
HAR 2136
57mm Carbo Ratchet w/Becket
4-15/16”
3/16”
500
2000
HAR 2140
57mm Carbo Triple Ratchet w/Cam
4-1/16”
3/8”
1500**
3750
HAR 2670
75mm Carbo Ratchet
5-3/8”
1/4”
750
3000
HAR 2671
75mm Carbo Ratchet
6-1/2”
1/4”
750
3000
HAR 2672
75mm Cheek
4-1/16”
-
750
3000
Part #
2140
2670
2671
2672
**Safe working loads and breaking strengths are based on cam strengths
Sailing
Ask for a Harken Catalogue
314
Harken
Harken Carbo Ratchamatic
The Carbo Ratchamatic is a load-sensing ratchet block that rolls freely
in both directions under low loads, and automatically engages the
ratchet as loads increase. Shifting between ratchet and light air modes
is seamless. Unloaded main and jib sheets run out freely during mark
rounding’s and asymmetrical spinnakers free instantly during jibes.
▪▪Main/Jib Sheets
▪▪Asymmetric spinnakers
Ratchet engagement may be adjusted to a higher or lower load
according to strength and sailing style. The Ratchamatic cheek block
mounts on either port or starboard. Holding power of 57 mm is as high
as 10:1. The 75 mm up to 15:1.
Part #
Description
2625/2680
2626
Length
Max.
Line
SWL
lbs
Breaking
strength lbs
3/8”
500
2000
2627
57mm Blocks
HAR 2625
Ratchamatic
4-1/16”
HAR 2626
Ratchamatic w/Becket
4-15/16”
3/8”
500
2000
HAR 2627
Ratchamatic w/Cam**
4-1/16”
3/8”
300
750
HAR 2629
Triple Ratchamatic w/Cam**
4-1/16”
3/8”
1500
3750
HAR 2630
Triple Ratchamatic w/Cam, Becket**
4-15/16”
3/8”
1800
4500
HAR 2633
Ratchamatic Cheek
3-1/4”
3/8”
500
2000
HAR 2634
Double Ratchamatic Block
4-9/16”
3/8”
750
1875
5-3/8”
7/16”
750
3000
2633
2629
75mm Blocks
HAR 2680
Ratchamatic
2630
**Safe working loads and breaking strengths are based on cam strengths
2634
Harken Cruising ESP Blocks
Cruising ESP blocks complement our existing blocks in looks and function, but are simpler in
design and construction. Sheaves feature sleeve bearings to handle high static loads and are ideal for
halyards or limited purchase systems on cruising boats.
Swivels and Fiddles
Use cruising ESP swivel and fiddle blocks in winch driven purchases of 4:1 or less. Perfect for vangs
or mainsheet systems on cruising boats from 35 ft to 45 ft (10 m to 14 m).
Part #
Description
Sheave
Single/swivel
2-1/4”
Length
Shackle
Pin
Max.
Line
SWL
lbs
Breaking
strength lbs
5/16”
5/8”
2,500
5,000
6058/6059
57mm Blocks
HAR 6059
5-1/2”
Sailing
75mm Blocks
HAR 6058
Single/swivel
3”
6-1/4”
5/16”
3/4”
3,500
7,000
HAR 6085
Fiddle
3/1-13/16
8-3/8”
5/16”
3/4”
3,500
7,000
6085
315
Harken
Harken Cruising ESP Deck Organizers
Deck organizers lead halyards and control lines aft, allowing crew to sail from the security of the
cockpit. They lead a large number of lines through a small space. Harken deck organizers feature
ball bearing sheaves and are available in double, triple, and stacked double and triple configurations.
The ESP Deck Organizer features aluminum Hardkote anodized side plates for strength and
corrosion resistance.
Mount organizers with large fasteners directly through the sheaves. If you need an additional sheave,
use the same holes and simply drill another hole to mount the longer organizer.
Match Cruising ESP mastbase blocks with organizers for a complete system.
6102 is pre-assembled as a double and shares a common center plate.
Part #
HAR 6052
Sheave
Length
Max.
Line
MWL
lbs
Breaking
Load lbs
2-1/4"
6-3/4"
5/8"
4,000
8,000
HAR 6053
2-1/4"
9-15/16"
5/8"
6,000
12,000
HAR 6054
1-9/16"
4-13/16"
1/2"
2,000
4,000
HAR 6055
1-9/16"
7-11/16"
1/2"
3,000
6,000
HAR 6066
1-9/16"
9-5/16"
1/2"
4,000
6,000
6052
6053
6054
6055
6066
Harken Stand Up Bases
Ball and Socket Swivel Bases: The ball and socket design allows blocks to swivel freely and pivot to a 45 degree
angle. Bases may be fitted with springs but block won’t hit the deck without them. Select blocks carefully as the
maximum working load of either base is often less than corresponding blocks.
Stanchion Mount Base: The 061 stanchion mount base attaches blocks to 7/8 in or 1 in (22 or 25 mm) stanchions or
pulpits and is often used to lead furling lines to the cockpit. Allows blocks to swivel and pivot for fairleads.
Springs: Springs are used to support blocks on padeyes, eyestraps, bases and traveler cars. Keeps blocks from hitting
the deck.
Stand-up Boots: Made of durable flexible PVC, stand-up boots hold blocks up without snagging lines. The 369 fits
40 mm and 57 mm Carbo and Black Magic blocks. The 370 fits 75 mm Carbo blocks.
Description
Height
Base
SWL
Breaking
Strength
HAR 010
2.00 Base For 3/8 Swivel
1-3/4”
2-1/8”
400
1300
HAR 061
Stanchion Mount Lead Base
1-1/4”
-
350
-
Part #
010
Description
Height
Dia
HAR 071
Part #
Block Stand Up Spring
2”
7/8”
HAR 097
Stand Up Spring For Bullet
1”
3/4”
HAR 369
Small Stand Up Boot
2”
1-9/16”
HAR 370
Large Stand Up Boot
2-5/8”
2-3/16”
071/097
061
369/370
Sailing
Ask for a Harken Catalogue
316
Harken
Cam Cleat Accessories
Micro
297
Standard
Offshore
424
425
145
283
Wedge kits and risers are
available to improve cam
angles. Underdeck shims
are included with angled
risers and wedges for
easy mounting.
294
293
Lightweight, fiber-reinforced Flairleads
feature stainless wearguards for long
life and are available in various colors
for color-coding cams.
296
295
438
475
Sailing
476
The 438 adapter plate is perfect for
use on masts and booms. It raises
the cleat off the mast to improve
the cleating angle and control.
298
375
495
494
424
425
137
281
201
282
Harken Cam Cleat Accessories
88
HAR 137
Large S/S eye strap
HAR 145
Cam-matic wedge kit
HAR 150KIT 150 rebuild kit
HAR 281
Eyestrap for micro cam
HAR 282
Eyestrap for 280 offshore cam
HAR 283
Offshore cam wedge kit
HAR 293
Flat micro cam riser
HAR 294
Angled micro cam riser
HAR 295
HAR 296
HAR 297
HAR 298
HAR 375
HAR 424B
HAR 424BL
HAR 424G
Flat cam matic riser
Angled cam matic riser
Micro cam wedge kit
Cam matic wire fairlead kit
Xtreme angle fairlead F/150 cam
Micro fairlead - Black
Micro fairlead - Blue
Micro fairlead - Green
HAR 424R
HAR 424Y
HAR 425B
HAR 425BL
HAR 425G
HAR 425R
HAR 425Y
HAR 438
Micro fairlead - Red
Micro fairlead - Yellow
Fairlead - Black
Fairlead - Blue
Fairlead - Green
Fairlead - Red
Fairlead - Yellow
Cam cleat adapter plate
317
Harken
Harken Ball Bearing Cam-Matic Cleats
Easy-Open Ball Bearing Cams Multiple rows of high-load ball bearings reduce
friction so cams open easily for snap-down, rather than draw-through cleating.
The cam horns and smooth V-shape guide line for easy entry. This allows precise
sail control without having to readjust the cleated line. The Teflon surface of the
aluminum Cam-Matic improves the cleat’s fast line engagement. The Cam-Matic
is the only cleat that will engage under maximum line tension.
150
412
365
Protective Tooth Design Rounded teeth hold securely by squeezing rather than
cutting into line to reduce wear.
High-Wear or Lightweight Models Aluminum Cam-Matics are Hardkoteanodized for high-load, high-wear, continuous adjustment applications. Available
in Micro, standard and Offshore sizes. Lightweight fibre-reinforced Carbo-Cams
for racing where weight is critical, or where adjustments are less frequent.
Available in Micro and standard sizes.
471
468
418
Long-Lasting Protection Ball Bearings and Carbo-Cams UV stabilized with
carbon-black additive for maximum protection.
Cam Kit 470
Part #
Description
Max. Min.
Line dia
Max Working Load lbs
Breaking Load
lbs
Pawls
HAR 150
Cam-Matic
1/2” 1/8”
300
750
Aluminum
HAR 280
Offshore Cam-Matic
5/8” 1/4”
500
1000
Aluminum
HAR 365
Carbo-Cam
3/8” 1/8”
200
500
Plastic carbon matrix
HAR 412
Double Cam-Matic
3/8” 5/16”
500
750
Aluminum
HAR 418
Trigger Cleat
3/16” 1/2”
500
1000
Stainless Steel
HAR 468
Micro Cam-Matic
3/32" 1/4"
200
400
Aluminum
HAR 471
Micro Carbo-Cam
1/8" 1/4"
150
300
Plastic/Carbon
Cam Kits
HAR 470
Cam-matic with X-Treme angle fairlead
468 cam, 476 fairlead
Harken Cam Bases
▪▪Mainsheets
▪▪Jib sheets
▪▪Control lines
Ball bearing swivel bases feature dual rows of Delrin ball bearings that
swivel freely even under high loads. Bases include stand-up springs and
a U-adaptor to accept a variety of appropriate blocks.
The 144 is the standard configuration with a tall arm. It is ideal for
mounting in the cockpit or for use on larger keel boats and small offshore
boats that use 3.00 in (76 mm) plastic blocks. The low-profile 205 is used
when installation is at deck level and when smaller blocks are used.
144/205
The 216 features a second cleat for lines led vertically through the base
of the swivel. It is frequently used to combine vang or backstay controls
in the same swivel base that handles the mainsheet.
The 240 is a simple swivel base for main and jib sheets on very small
boats or for control lines on boats of all sizes.
216
402/403
Description
SWL lbs
Use with
Swivel Base
-
57mm / 75mm / 2.25” / 3.00” / ratchets
HAR 205
Little Swivel Base
-
57mm / big bullet / dinghy / 2.25” / little ratchets
HAR 216
Duo Cam Swivel Base
-
57mm / 2.25” / 3.00” / ratchets
HAR 238
Cam Base w/150 Cam-Matic
-
-
HAR 239
Cam Base w/365 Cam-Cleat
-
-
HAR 240
Bullseye Swivel Base/150 Cam
300
-
HAR 241
Bullseye Swivel Base/365 Cam Cleat
150
-
HAR 402
Small Swivel Base/412 Cam-Matic
-
57mm / 2.25" double ratchets
HAR 403
Small Swivel Base/412 Cam-Matic
-
57mm / 2.25"/3.00" double ratchets
Sailing
Part #
HAR 144
238
240/241
318
Harken
Ordering Traveler Systems
1. Determine System Size
Determine size of traveler system (13, 22, 27, 32, 42, or 64 mm) based on
mainsail area, placement on the boom, and mono- or multihull. See Mainsail
Traveler System Size Selection chart. Typical boat lengths are listed as a
guideline only.
Typical Boat Lengths:
22 mm Small Boat: 6.7–8.5 m (20'–28')
27 mm Midrange: 7.9–10.7 m (26'–35')
32 mm Big Boat: 10.4–12.8 m (34'–46')
Mainsail Traveler System Size Selection
Maximum mainsail area
Monohulls
Multihulls
End-boom sheeting
Mid-boom sheeting
End-boom sheeting
Mid-boom sheeting
ft2
m2
ft2
m2
ft2
m2
ft2
m2
Cars
Dinghies/Light Daysailers
13 mm Micro CB
22 mm Small Boat CB: low-load
22 mm Small Boat CB: standard
22 mm Small Boat CB: high-load:1250 series
27 mm Midrange CB: standard
110
125
160
200
350
10.2
11.6
14.9
18.6
32.5
85
100
135
160
285
8
9.3
12.5
14.9
26.5
85
100
135
160
275
8
9.3
12.5
14.9
25.5
70
80
110
135
215
6.5
7.5
10.2
12.5
20
150
190
260
300
14
17.5
24
28
125
150
215
240
11.5
14
20
22
135
160
215
240
12.5
14.9
20
22
110
125
160
190
10.2
11.5
14.9
17.5
425
550
575
700
1100
1100
1400
39.5
51
53.4
65
102
102
130
350
450
500
525
900
900
1100
32.5
42
46.5
49
83.6
83.6
102
350
450
500
525
900
900
1100
32.5
42
46.5
49
83.6
83.6
102
300
350
425
450
750
750
900
28
32.5
39.5
42
69.7
69.7
83.6
Small Offshore Boats/Heavy Daysailers
22 mm Small Boat CB: standard
22 mm Small Boat CB: high-load:1250 series
27 mm Midrange CB: standard
27 mm Midrange CB: high-load
Large Offshore Boats
32 mm Big Boat CB: standard
32 mm Big Boat CB: high-load
32 mm Big Boat CB: 2 stand-up toggles/32 mm CRX Roller: 3074
32 mm Big Boat CB: 2 T3201Bs joined by 580
32 mm Big Boat CB: 2 high-load cars coupled
42 mm Mini-Maxi: 3068/32 mm CRX Roller: 3075
64 mm Maxi: 3070
2. Select Track
Select size and length of track (sizes listed by width measurement of top of track in millimeters). Choose low-beam
track if it will be supported the entire length. Choose high-beam track for spanning companionways, cockpits, etc.
13 MM MICRO
22 MM SMALL BOAT
/2"
13 mm
3
/8"
9 mm
27 MM MIDRANGE
/"
22 mm
1/2"
12 mm
9/16"
14 mm
/16" (17 mm)
11
2707
/2"
13 mm
1
Sailing
13
/16"
20 mm
2709
R27
1602
373
2720/2751
1"
25 mm
/"
22 mm
11/16"
27 mm
7 8
1"
25 mm
15/8"
42 mm
3/4"
19 mm
R32
3159
13/16"
30 mm
HIGH-BEAM
11/4"
32 mm
R27HB
21/4"
57 mm
R32HB
7/8"
22 mm
108
11/4"
32 mm
2721
11
/16"
17 mm
1"
25 mm
32 MM BIG BOAT
11/16"
27 mm
7 8
1
LOW-BEAM
374
2725
OR
17/32"
31 mm
15/8"
42 mm
319
Harken
Ordering Traveler Systems
3. Select Car & Purchase Requirements
+
Based on system size and purchase requirements, select a car and
accessories that match track and load requirements. Select control
blocks for the car.
+
A kit contains car-mounted components to make a 2:1, 3:1, or 4:1
system. 27 and 32 mm systems only.
OR
Cars come standard with shackles for attaching the mainsheet to the car.
Upgrade to a stand-up toggle with control tangs to attach high-performance
ball bearing control blocks. See Purchase Selection Guides for examples
and sizing.
+
4. Choose End Controls
Choose end controls that mate with the control blocks on the
traveler car for the correct purchase system, including a deadend,
allowing clean-running lines. Use Carbo® ball bearing end controls with
toggle-mounted, ball bearing control blocks, or use ESP sleeve bearing
end controls with ESP car-mounted, sleeve bearing control blocks.
Kit
Options include end controls with attached cams, or purchase cams
separately and mount remotely. See pages 16–17 for common systems.
5. Choose Endstops
Endstops are designed to absorb shock loads and should be installed
when end controls are not used. Trim caps finish off track ends cleanly.
Select high- or low-beam endstops/trim caps to match track. Low-beam,
line-shedding endstops prevent snags. Sold in pairs.
CARBO® BALL BEARING
END CONTROLS
6. More Information
Previous steps show the most common configurations. Other options
include windward sheeting cars, soft attachments, coupled cars, track
risers, and track splice links.
If you have questions, contact a professional rigger or Harken Technical
Service at [email protected]
ESP SLEEVE BEARING
END CONTROLS
WINDWARD SHEETING
SOFT-ATTACH
COUPLED CARS
TRACK RISERS
Sailing
Ordering Genoa Lead Systems
The chart below sizes lead cars for the #1, #2, and #3 genoas based on typical loads for
these sails. See Block Loading vs Angle of Deflection and Genoa System Loading on page
35 to size for different deflection angles and wind speeds. Visit www.harken.com or see
page 21 for common configurations.
Adjustable
Genoa Lead Cars
#1 & #2 Genoa
#3 Genoa
22 mm
Small Boat
m2
ft2
450
41
175
16
Maximum sail area
32 mm Big Boat
Standard
High-load
ft2
m2
ft2
m2
1500 139 2700 251
435
40
650
60
27 mm
Midrange
ft2
m2
750
70
330
31
MiniMaxi
ft2
m2
4400 409
1300 121
Assumes 155% Genoa/25 knots apparent wind/45° sheet lead angle
Assumes 100% Genoa/40 knots apparent wind/60° sheet lead angle
109
320
Harken
Harken 13 mm Micro CB Traveller Cars
Micro Captive Ball Traveler Cars are used on small dinghies and catamarans. The one-piece
solid aluminum construction is lightweight and strong. Machined aluminum Hardkoteanodized races permit Torlon balls to transition smoothly from the active-to-return race for
smooth trimming or easing. Stainless steel wire guides keep the balls captive when the car is
off the track. Pivoting shackle cars have low pivot points to handle non-vertical loads.
Description
SWL
lbs
Breaking
Strength lbs
HAR 2700
Micro Traveler CB Car w/Pivot Shackle
310
1500
HAR 2701
Micro CB Traveler Car w/Control Block
310
1500
HAR 2703
Micro Traveler CB Car for Ti-Lite
310
1500
Part #
▪▪Mainsheet cars
▪▪Jib sheet cars
▪▪Vangs on small dinghies
▪▪Control on small keelboats
2700
2701
2703
Harken 13 mm Micro CB Track & Accessories
HAR 2704
HAR 2705
HAR 2706
HAR 2707.1M
HAR 2707.2M
HAR 2707.600MM
Control block (pair)
Control tang (pair)
Micro endstop (pair)
Low-beam track 1-meter
Low-beam track 2-meter
Low-beam track .6-meter
2704
2705
2706
2707
Harken 22 mm Small Boat Traveller CB Cars
Used on large dinghies, keelboats, beach cats and offshore boats to 27 ft (8 m).
One-piece solid aluminum construction. Ball bearings run on machined aluminum Hardkoteanodized races for smooth trimming and easing. Stainless steel wire guides keep the balls
captive when the car is off the track.
Cars with a 500 lb (227 kg) safe working load use Delrin balls. Cars with higher safe
working load use high-strength Torlon balls.
Ti-lite cars matched with Ti-lite blocks provide the ultimate, lightweight, low-profile system.
High-tech line replaces shackles and spring.
Description
SWL
lbs
Breaking
Strength lbs
HAR 2726
Small Boat CD Car w/Shackle
500
2500
HAR 2727
HL Small Boat CB Car w/Shackle
850
2500
HAR 2730
Small Boat CB Car w/Toggle
500
2500
HAR 2731
HL Small Boat CB Car w/Toggle
850
2500
HAR 2732
Small Boat CB Car for T-Lite Block
500
2500
HAR 2734
HL Small Boat CB Car w/Fixed Sheaves & Cam
850
2500
HAR 2735
1250 Small Boat Car w/Toggle
1250
2500
HAR 2736
1250 Small Boat CB Car w/Fixed Sheaves
1250
2500
Sailing
Part #
Ask for a Harken Catalogue
▪▪Mainsheet Systems
▪▪Genoa Leads
2726/2727
2730/2731
2734
2732
2736
2735
321
Harken
Harken 22 mm Small Boat Accessories
HAR 173
HAR 174
HAR 264
HAR 2723
HAR 2749
End stop small boat low profile track
End stop small boat hi-beam track
HD end stop for 143/155 track
Pair trim caps (2721 only)
Swivel Ear Set
Harken 22 mm Small Boat Track
HAR 2720-1.2M
HAR 2720-1.8M
HAR 2720-1M
HAR 2721-1.2M
HAR 2721-1.5M
HAR 2725-1.5M
1.2m Low profile track
1.8m Low profile track
1.0m Low profile track
1.2m Hi-beam track
1.5m Hi-beam track
High beam track
2749
Harken 27 mm Endstops & Trim Caps
When end controls are not used, add 1522 or 1523 endstops
to absorb shock loads. Sold in pairs.
HAR 1621
HAR 1622
Mid range track tim cap
Mid range track trim cap
1622
1621
Harken CB Traveler Cars 27 mm Midrange & 32 mm Big Boat
Midrange CB traveler cars are built to handle high loads on boats from 27ft to 34ft. Big Boat CB traveler cars
handle high loads on boats from 32 to 50ft and up to 70ft with coupled cars. The one-piece solid aluminum
construction is lightweight and strong. Ball bearings run on machined aluminum Hardkoteanodized races for
smooth trimming and easing. Stainless steel wire guides keep balls captive when the car is off the track. Shackle/
toggle cars have low pivot points to handle nonvertical loads. Control blocks attach to toggle ears, reducing load
on the car. Lightweight soft attachment cars provide a variety of rigging solutions - athwartship jib or mainsheet
systems, for example. Lash Carbo Loop blocks to the car for traveler control. Car-mounted control blocks come
preassembled with all components. When ordering please specify control block purchase from 1:1 to 4:1.
Part#
Description
L
W
H
Max Work
Load
Breaking
Load
T2701B
27 mm Midrange
HAR T2701B
HAR T2701B.HL
HAR T2702B
HAR T2702B.HL
HAR T2703B
Car/shackle
4-1/4"
2-3/4"
2"
1800
5000
High-load car/shackle
5-3/16"
2-3/4"
2"
2300
5000
Car/stand-up toggle
4-1/4"
2-3/4"
3-1/8"
1800
5000
High-load car/stand-up toggle
5-3/16"
2-3/4"
3-1/8"
2300
5000
4-1/4"
2-3/4"
3-1/8"
1800
5000
High-load car/stand-up toggle/ears
5-3/16"
2-3/4"
3-1/8"
2300
5000
HAR T2731B.HL
High-load car/shackle/3:1 controls
5-3/16"
3-7/32"
2"
2300
5000
5-3/8"
3-11/32"
2-5/8"
3000
3175
32 mm Big Boat
HAR T3201B
HAR T3203B
Car/shackle
T2703B
Car/stand-up toggle/ears
5-3/8"
3-11/32"
3-1/2"
3000
7000
High-load car/stand-up toggle/ears
7-7/16"
3-11/32"
3-1/2"
4500
9000
HAR T3231B*
Car/shackle/3:1 controls
5-3/8"
4"
2-5/8"
3000
3175
HAR T3232B
Car/stand-up toggle/3:1 controls
5-3/8"
4"
3-1/2"
3000
3175
HAR T3242B
Car/stand-up toggle/4:1 controls
5-3/8"
4-3/8"
3-1/2"
3000
3175
HAR T3203B.HL
T3231B
Sailing
Car/stand-up toggle/ears
HAR T2703B.HL
T2702B
322
Harken
Harken End Controls 22 mm, 27 mm, & 32 mm
22 mm Small Boat end controls provide 2:1 to 4:1 purchases. Carbo AirBlock components combined with Micro Carbo-Cam cleats keep
traveler weight minimal. 27 mm Midrange and 32 mm Big Boat end controls allow the installation of 2:1 to 5:1 purchases. 40 mm Carbo
AirBlock sheaves with free-running Torlon® ball bearings let cars instantly adjust and release under load. Cam-Matic cleats provide
precise cleating. Use E2750.HB Midrange and E3250.HB Big Boat double-sheave end controls for cabintop travelers with cars using 3:1
or 4:1 purchases. Contact Harken to order special-length track with mounting holes for E2750.HB and E3250.HB end controls.
2740
Part #
2741
2742
2743
Description
Sheave
2755
L
E2750
W
Max
Line
MaxWork
Load lb
Breaking
Load lb
Purchase
5/16"
300
600
2:1
22 mm Small Boat
HAR 2740
Single sheave (pair)
1-1/8"
3-7/16"
1-3/8"
HAR 2741
Single sheave/423 Carbo-Cam (pair)
1-1/8"
3-7/16"
3-1/8"
1/4"
300
600
2:1
HAR 2742
Double sheave (pair)
1-1/8"
3-7/16"
1-3/8"
5/16"
600
1200
3:1/4:1
HAR 2743
Double sheave/423 Carbo-Cam (pair)
1-1/8"
3-7/16"
3-1/8"
1/4"
600
1200
3:1/4:1
HAR 2755
Pinstop (Use with 2751 track)
-
1-5/8"
1-3/8"
-
-
-
-
27 mm Midrange
HAR E2750
Double sheave/deadend (pair)
1-3/8"
3-3/4"
1-13/16"
2-5/8"
1800
3600
4:1
HAR E2756
Double sheave/deadend/Carbo-Cam cleat
(pair)
1-3/8"
3-3/4"
3-15/16"
3/8"
600
500
4:1
HAR E3250
Double sheave/deadend (pair)
1-3/8"
3-3/4"
1-13/16"
3/8"
1800
3600
4:1
HAR E3256
Double sheave/deadend/Cam-Matic cleat (pair)
1-3/8"
3-3/4"
4-1/8"
3/8"
900
2300
4:1
32 mm Big Boat
Sailing
Harken Genoa Lead Cars
22 mm Small Boat & 27 mm Midrange
G226S
CB adjustable genoa lead cars feature recirculating Torlon ball bearings for easy
adjustment under full sheet loads.
Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles.
Wide sheave holds two sheets during sail changes.
Cars feature car-mounted, axle-bearing control blocks for strength and durability. All
CB genoa lead cars are compatible with Harken end controls.
Performance CB Adjustable
Sheave carriers feature high-performance sheaves with roller bearings to handle radial
loads, while sideload balls handle thrust loads for easy trimming and fore and aft
adjustment.
ESP CB Adjustable & Pinstop
Sheave carriers feature ESP axle-bearing sheaves.
Use pinstop cars in applications where lead positions change infrequently.
Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you
to upgrade your system without changing track.
Part #
Description
Sheave
Max.
Line
G272B
G276S
SWL lbs
Breaking
Strength lbs
Track
2,300 lbs
5,000 lbs
R27
ESP CB Adjustable
HAR G272B
Midrange/Sheave
HAR G226S
Small Boat/Pinstop
1-1/2”
1/2”
1,250 lbs
2,500 lbs
2751
HAR G276S
Midrange Boat/Pinstop
2”
1/2”
3,000 lbs
6,000 lbs
R27
2-1/4”
-
ESP Pinstop
ol.
contr .
o
t
n
leg
dow
omes conds on a ke.
c
l
l
a
a
e
It
your w
ean s
NG.
n
m
i
I
n
n
N
a
io
W I N fect trim c e competit
r
h
t
e
p
e
leav
The
s that
d
n
o
c
Se
Harken
Achieve optimal sail shape and boat speed
in a heartbeat with Harken’s new highperformance genoa lead cars, designed
with roller bearing sheaves for lightningquick, smooth-rolling control.
High-performance genoa lead cars are
part of our new modular system with
customizable purchase for easy system
configuration. Upgrade today!
Captive ball bearings
Built-in bungee tang
TIP...
When coming out of a tack, pull the genoa
lead car forward to power up the boat, then
gradually ease it aft to the correct adjustment
for optimal sail shape and speed.
INNOVATIVE SAILING SOLUTIONS
Made in USA
Get your lead today at www.harken.com
NEW!
Carbo® OneTouch®
LOCKING WINCH HANDLE
LIGHTER, QUICKER, STRONGER
• Full-length grab bar simplifies crew work
• Carbo® technology: lighter weight
and just as strong
• SpeedGrip technology: single-handed
speed, double-handed power
Learn more: www.harken.com/Carbo-OneTouch
MADE
IN USA
325
Harken
N
Harken Carbo® OneTouch Winch Handle
SpeedGrip technology: The only handle with independent swivel
between ball bearing knob and hand grip for faster trimming and
powerful grinding.
Carbo technology: Lightweight, strong, reliable
fiber‐reinforced composite construction.
Manufactured
& assembled in
Harken USA
Easy one‐hand operation: Grab anywhere—
full length grab bar locks/unlocks handle.
Ergonomic shape is easy to activate
with either palm or thumb.
9-1/2“ (241 mm)
7-1/8” (181 mm)
Rise
1-5/16” (33 mm)
Weight 20.8 oz (590 g)
HAR B10HOT
W
E
Lightweight and fast-acting, the Carbo OneTouch locking winch handle
makes grinding winches easy. Racers will maneuver faster and cruisers
will have confidence in a reliable and easy to use winch handle.
▪▪Easy one-hand operation: Ergonomically-designed, full-length grab
bar locks/unlocks patented locking mechanism to remove the handle
from the winch
▪▪Carbo technology: Lightweight, strong and reliable fiber-reinforced
composite construction; UV-stabilized protection; marine-grade
stainless steel locking mechanism; hardcoat-anodized aluminum
drive socket
▪▪SpeedGrip technology: Independent swivel between knob and hand
grip keeps wrists and arms in best power position for fast trimming
with palm at low loads and powerful two-handed grinding when
Length
loads are high
Height
Locking Pins are
316 marine grade
stainless steel.
Stardrive is 6061 T6 highstrength
black anodized aluminum.
Harken Ball Bearing Handles
These robust low-friction ball bearing handles match a wide range of cranking needs for both racers and cruisers. Handles
feature a ball bearing grip that efficiently transmit power into the winch. All handles fit international standard winch sockets.
Locking vs Plain: Lock-in handles are easy to engage and release with a thumb switch. Racers prefer plain handles because they
are faster to insert.
Handle Length: 10” (254 mm) is the most comfortable handle length for most sailors. Published power ratios are based on this
length. 8 in (203 mm) handles grind faster because they swing through a smaller circle, but power is reduced by 20%. 8 in (203 mm) handles are ideal for smaller boats and light air where speed is more important than power.
SpeedGrip handles are designed for the serious racer and effective in both light and heavy air conditions. The unique grip
permits low-load fast cranking using the palm, and powerful two-handed grinding when loads are high. The low profile
B8ASGLP is made for fast, one-handed cranking where speed is the concern, not power.
Part #
Length
Description
Height
B8AL
B8AP
Standard
HAR B10ADL
10”
Locking Aluminum Double
11-1/2”
HAR B10AL
10”
Locking Aluminum
7”
HAR B10AP
10”
Plain Aluminum
7”
HAR B8AL
8”
Locking Aluminum
6-5/8”
HAR B8AP
8”
Plain Aluminum
6-5/8”
B10ADL
B8ASGLP
SpeedGrip
HAR B10ASG
10”
HAR B8ASG
8”
SpeedGrip Aluminum
7-3/16”
HAR B8ASGLP
8”
SpeedGrip Low Profile Aluminum
4-13/16”
HAR BK4512
HAR BK4513
SpeedGrip Aluminum
7-7/16”
B8ASG
Winch service kit (10 pawls/10 springs)
Tube winch grease, 100ml
Harken Aluminum Tiller Extensions
L
Tube
Weight oz
Fastener
HAR 7100.24
Part #
24
5/8"
4.1
3/16"
HAR 7100.30
30
5/8"
4.9
3/16"
HAR 7100.33
33
5/8"
5.2
3/16"
HAR 7100.36
36
5/8"
5.6
3/16"
HAR 7100.42
42
5/8"
6.3
3/16"
48
5/8"
7.1
3/16"
HAR 7100.48
HAR 7101
Tiller extension base
HAR 7102
Replacement universal joint
7101
7102
Sailing
The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel
of the helm. The simple and lightweight design has no unnecessary frills—every aspect contributes to its strength, stiffness, or
comfort. The universal joint and nonslip foam grip are UV-protected and perfect for full dagger-grip and fingertip steering.
326
Harken
Harken Aluminum Winches
Designed for sailors who want lightweight, extremely strong winches with plenty of power.
The drum’s gripping surface is shaped for each winch size and drum material and features
diagonal ribs (rather than textured abrasive materials) to maximize gripping power and
greatly reduce line wear. When easing, the angle of the ribs stops line from rising, preventing
overrides and providing a smooth controlled release as the line exits the winch. Aluminum
drums and high-strength composite self-tailing jaws and skirt save weight. Composite roller
bearings reduce friction under load and don’t require lubrication. Loadcarrying gears and
pins are 17-4PH stainless steel for strength and durability. Small boat winches are available
in single speed. Self-tailing models sizes 60 and up come in two or three speeds.
Part #
Drum
(D)
Base
(B)
Height
(H)
HAR B6A
2-3/8"
3-9/16"
3-1/4"
HAR B8A
2-11/16"
4-1/2"
3-9/16"
Line Entry
Height (LE)
B6A
Line Max
Gear Ratio
1 2 3
Power Ratio
1 2
1-5/16"
-
1 - -
8.4 -
1-1/2"
-
1 - -
7.5 -
1/4" - 3/8"
2.43 - -
16.9 -
Classic Plain-Top
Radial Self-Tailing
HAR 15STA
2-7/8"
4-3/4"
5-1/2"
2-1/8"
HAR 20STA
2-7/8"
5-3/8"
5-13/16"
2-3/8"
1/4" - 1/2"
2.76 - -
19.20 -
HAR 35.2STA
3-1/8"
5-7/8"
6-11/16"
3-1/8"
5/16" - 1/2"
2.13 5.65 -
13.50 35.90
HAR 40.2STA
3-1/8"
6-3/16"
6-7/8"
3-1/4"
5/16" - 1/2"
2.13 6.28 -
13.50 39.90
35.2STA
Harken Chrome Radial Winches
Designed for sailors that want the elegance of mirror-polished chrome to enhance their yacht’s
lines. They feature chrome drums, black composite bases and tops, and come in 1-, 2-, or
3-speed self-tailing styles. The drum’s gripping surface is shaped for each winch size and
drum material and features diagonal ribs (rather than textured abrasive materials) to maximize
gripping power and greatly reduce line wear. When easing, the angle of the ribs stops line
from rising, preventing overrides and providing a smooth controlled release as the line exits
the winch. High strength composite self-tailing jaws and skirt save weight. Composite roller
bearings reduce friction under load and don’t require lubrication. Load-carrying gears and
pins are 17-4PH stainless steel for strength and durability. Small Boat winches are available in
single speed. Self-tailing models sizes 60 and up come in two or three speeds.
Drum
(D)
Base
(B)
Height
(H)
Line Entry
Height (LE)
HAR 20STC
2-7/8"
5-3/8"
5-13/16"
2-3/8"
1/4" - 1/2"
2.76 - -
19.20 -
HAR 35.2STC
3-1/8"
5-7/8"
6-11/16"
3-1/8"
5/16" - 1/2"
2.13 5.65 -
13.50 35.90
HAR 40.2STC
3-1/8"
6-3/16"
6-7/8"
3-1/4"
5/16" - 1/2"
2.13 6.28 -
13.50 39.90
Part #
Line Max
Gear Ratio
1 2 3
Power Ratio
1 2
Sailing
Harken Performa Winches
Optimized For High-Tech Line
Harken Performa™ winches are for racers and racer/cruisers using high-tech line who don't wish to invest
in a carbon winch, or who need winches in smaller sizes. The Performa design combines the efficiency of
Harken Radial® winches with the sandblasted grip of its Carbon Fiber racing line for a powerful hybrid
that lets crew trim and ease sails quickly and repeatedly as wind strength and directions change.
Part #
Drum
Base
Height
HAR 20.2PTP
2-7/8”
5-3/8”
5-1/16”
Line Entry
Height (LE)
Line Max
Gear Ratio
1 2
Power Ratio
1 2
-
1 2.76
6.95 19.20
Plain-Top
2-3/8”
HAR 35.2PTP
3-1/8”
5-7/8”
5-13/16”
3-1/8”
-
2.13 5.65
13.50 35.90
HAR 40.2PTP
3-1/8"
6-3/16"
6"
3-1/4"
-
2.3 6.28
13.50 39.90
Self-Tailing
HAR 20STP
2-7/8”
5-3/8”
5-13/16”
2-3/8”
1/4”-3/8”
-
19.20
HAR 35.2STP
3-1/8”
5-7/8”
6-11/16”
3-1/8”
5/16”-1/2”
5.65
13.50 35.90
HAR 40.2STP
3-1/8"
6-3/16"
6-7/8"
3-1/4"
1/2"
2.13 6.28
13.50 39.90
HAR 46.2STP
3-15/16"
7-1/4"
7-15/16"
3-9/16"
9/16"
2.30 9.17
11.70 46.50
Sandblasted grip
Composite Bearing
Multiple styles
327
Harken
Mkiv Jib reefing & furling
1
for racing anD
PerforMance
cruising sailors
MKIV furling systems are strong, lightweight and
aerodynamic, with the performance and features
Harken® is known for. Longevity, ease of use and
simplicity of installation are crucial components of
the design. These free-rolling furlers make all the
difference in headsail control by allowing racers
and cruisers to quickly furl and reef from the safety
of the cockpit, while maintaining great sail shape
and optimal speed.
2
3
Details Make the Difference
easy reefing anD furling
Multiple rows of large-diameter Torlon® ball bearings used in
high-load areas to minimize friction for easy reefing and furling;
require no lubrication or isolating seals.
More furling Power
Large inner spool diameter increases mechanical advantage for
powerful reefing and furling. Smaller outside dimension allows
unit to fit narrow bows or below deck. Unit rotates around rod
or wire headstay so furling bearings do not carry the headstay
load for easy furling.
long-lasting Protective finish
Specially formulated low-stretch black line is abrasion
and UV resistant; standard on units 0, 1 and 2.
Strong, lightweight halyard swivel reduces
windage and weight aloft to minimize pitching
and heeling. Stacked bearing races evenly
distribute radial and thrust loads to ball
bearings; foils turn freely under halyard loads.
Independent halyard and tack swivels furl sail
center before head and tack for improved sail
shape and upwind pointing.
4
2. strong foil Joints
Tough triple-interlock foil joints withstand
years of torque loading. Connector’s geometric
shape interlocks to foil and secures with a
syringe-injected adhesive into an engineered
channel. Screws provide final lock.
5
3. easy to assemble foils
C-shaped open connectors with low-friction
plastic isolators slip onto the headstay wire
and into foil for easy installation.
4. Drum installs over
existing turnbuckle
Units are adaptable to a variety of rigging
options for easy installation. Harken toggle
assembly accepts standard turnbuckle using
swage, rod, Norseman® or Sta-Lok® terminals.
Toggle flips for fork or tang chainplate
installation. A single stainless steel clevis pin
provides access to the turnbuckle for
adjustment.
6
Sailing
Aluminum line guard, torque tube and swivels are deepsaturation Hardkote-anodized for no-fade UV-stabilization,
strength and durability. The Hardkote-anodized line guard
is urethane coated for additional corrosion protection.
1. halyard swivel turns freely
5. stainless steel feeder
Stainless steel feeder allows fast
singlehanded hoist and quick sail changes.
6. removable split Drum
Line guard and spool come off easily
for racing.
7. Double foil grooves for racing
Aerodynamic aluminum Air Foils® handle
extreme reefing loads. Double foil grooves
allow fast hoists, douses and sail changes.
7
DO NOT use Harken equipment for human suspension.
157
328
Harken
Ordering Furling
1. Choose furler type
The table below is based on sailing style and approximate boat size.
This table is only a guideline. Do not use it to determine unit size.
Size is based on the headstay and clevis pin diameters listed on unit pages.
Comparison Chart
MKIV
ESP
Racers/Performance Cruisers
Cruisers
Note: Typical boat lengths are listed as a guideline but are not the determining factor. Check with Harken® if your length varies.
Typical Boat Lengths
Unit 0: 22–30 ft (6.5–9.1 m)
Unit 1: 28–36 ft (8.5–11 m)
Unit 2: 35–46 ft (10–14.2 m)
Unit 3: 45–60 ft (13.7–18.3 m)
Unit 4: 65–80 ft (19.8–24.4 m)
Unit 0: 20–28 ft (6–8.5 m)
Unit 1: 26–35 ft (8–10.7 m)
Unit 2: 34–46 ft (10.4–14 m)
Unit 3: 45–61 ft (13.7–18.6 m)
Foils
Double groove Air® Foil
Stainless steel feeder
Single Groove Round Foil
Stainless steel feeder
Halyard and
Tack Swivel
Independent swivels
for improved sail shape
Fixed
Drum
Removable split drum
for racing
Fixed
Line
Included on Units 0, 1, 2
Not Included
2.2.Determine
unitsize
size
Determine unit
SizeSize
is based
on on
thethe
headstay
diameterslisted
listedononunit
unitpages.
pages.
is based
headstayand
andclevis
clevis pin
pin diameters
Choose between unit sizes when diameters are shared by considering stay length
3. Determine
if additional
foils needed,
topany
foil
and typical boat
size recommendations.
Contact ESP
Harken-®Order
if you have
questions.
Use the I and J measurements to determine the length of the headstay. If the
3. Determine if additional foils needed
existing headstay is longer than the standard length listed under Headstay
Use the I and J measurements to determine the length of the headstay. If the existing
Length
on unit
pages,
order
additional
foilslisted
and under
connectors.
AllLength
ESP furlers
headstay
is longer
than
the standard
length
Headstay
on unit
require
that
you
order
a
precut
top
foil.
See
unit
pages
pages, order additional foils and connectors. In some cases one or two extra foils
and connectors may be necessary.
Forestay
Measure
wire or rod
diameter
Measure
clevis pin
diameter
Bow
4. Determine Toggle, Link Plate or Leg Kit
4. Determine
Link Plate,
or Leg
Kit in the 2013 Harken catalogue to
See
the MKIV &Toggle,
ESP Toggle
& Rigging
Options
Use short
toggle
(MKIV)
or short
leg kits (ESP) for maximum luff length. For ESP,
determine
toggle
and
rigging
requirements.
use long or medium leg kits to accommodate a turnbuckle or to clear an anchor.
Choose lead
and
accessories,
ESP -ESP
Order- Order
line line
5.5.Choose
leadblock
blockkitkit
and
accessories,
®
Harken
recommends
equippingevery
every furling
furling system
ratchet
leadlead
block
kit. kit.
Harken
recommends
equipping
systemwith
witha a
ratchet
block
Other
on the
Furling Accessories page (186) include equipment for halyard
Order
lineparts
for ESP
furlers.
management and racing hardware for faster sail changes. Order line for ESP furlers.
I
Sailing
6.6.Prepare
andheadstay
headstay
Prepare sail
sail and
HaveHave
a luff
tape
added
Matchthe
the
luff to
length
of the
stay
length
a luff
tape
addedtotoyour
your genoa.
genoa. Match
sailsail
length
the stay
length
minus
minus
height
ofhalyard
the halyard
andunit.
lower
sizing information
thethe
height
of the
swivelswivel
and lower
Seeunit.
sizingSee
information
on page 169.in
the 2013 Harken catalogue
All MKIV and those ESP furlers with long or medium leg kits install over the existing
All MKIV
and those
ESP furlers
with longforleg
kits install
the
turnbuckle.
The turnbuckle
is accessible
adjustment
by over
raising
theexisting
drum. See the
turnbuckle.
MKIV & ESP Toggle & Rigging Options on page 180 to determine toggle and rigging
The requirements.
turnbuckle isSome
accessible
for will
adjustment
by raising
the drum.
headstays
require cutting
and shortening
to Some
fit Harken
headstays
will requireonly
cutting
and shortening
to fit Harken
toggles.
Sometimes
toggle. Sometimes
the lower
threaded turnbuckle
fitting needs
changing.
only Check
the lower
turnbuckle
needs changing.
Check
with athreaded
professional
rigger onfitting
stay condition
before reusing
stay.with a
professsional rigger on stay condition before reusing.
For all units, rod rigging requires a Harken rod adapter stud and it must be cut
For all
rod rigging
requires arod
Harken
adapter stud and it must be cut
andunits,
coldheaded
by an authorized
servicerod
center.
and coldheaded by an authorized rod service center.
7. Contact
If you have any questions, please contact your dealer or Harken Technical Service.
7. Contact
J
Headstay Length =
MKIV
Jaw/Jaw toggle
ESP Short
Leg Kit
If you have any questions, please contact your dealer or Harken Technical
Service
MKIV Long
Link Plate
168
I2 + J2
ESP Long
Leg Kit
329
Harken
Harken MKIV Unit 0
Boat Length 22' - 30' (6.5 - 9.1 m)
▪▪Wire Ø: 5/32”, 3/16", 7/32"
▪▪Rod Ø: -4, -6
▪▪Clevis Pin Ø: 5/16”, 3/8", 7/16"
▪▪Headstay: Standard 38'7" (11.77 m); max 45'7" (13.9 m)
Part No.
Bearing shields protect Air
Swivel® and tack bearings
from UV and dirt
Small Air Swivels® turn
freely on computer-designed
bearing races to reduce
windage and weight aloft
Description
HAR 7410.10
Large-diameter ball bearings
minimize friction, require no
lubrication or isolating seals
Furling system
Toggle Assembly Required - sold separately
HAR 7410.20 3/8
Eye/Jaw reversible toggle assembly with
3/8" (9.5 mm) clevis pin
HAR 7410.20
7/16
Eye/Jaw reversible toggle assembly with
7/16" (11.1 mm) clevis pin
Optional Parts
HAR 7410.30
Extra 7' (2.13 m) luff foil extrusion
HAR 7410.31
Extra 61/2" (165 mm) connector with
bushings
HAR 7420-4*
-4 rod adapter stud (thread Ø UNF 7/16")
Pressure-cast sculpted
aluminum line guard is
open for easy line access
Large inner spool diameter
increases mechanical
advantage for more
powerful reefing and furling
Harken MKIV Unit 2
Boat Length 35' - 46' (10.6 - 14.2 m)
▪▪Wire Ø: 5/16", 3/8"
▪▪Rod Ø: -12, -17, -22
▪▪Clevis Pin Ø: 5/8", 3/4"
▪▪Headstay: Standard 60'4" (18.38 m); max 67'4" (20.51 m)
Part No.
Description
Harken MKIV Unit 1
Boat Length 28' - 36' (8.3 - 11 m)
HAR 7412.10
▪▪Wire Ø: 1/4", 9/32", 5/16"
▪▪Rod Ø: -8, -10, -12
▪▪Clevis Pin Ø: 1/2", 5/8"
▪▪Headstay: Standard 45'11" (13.99 m); max 52'11" (16.12 m)
HAR 7412.20 5/8
Eye/Jaw reversible toggle assembly with
5/8" (15.9 mm) clevis pin
HAR 7312.20 5/8
Jaw/Jaw toggle assembly with
5/8" (15.9 mm) clevis pin
HAR 7312.20 3/4
Stud/Jaw toggle assembly with 3/4" (19.1
mm) clevis pin (thread Ø UNF 3/4" LH)
HAR 7312.21 5/8
Long link plate with toggle 5/8" (15.9 mm)
clevis pin
HAR 7312.21 3/4
Long link plate with toggle 3/4" (19.1 mm)
clevis pin
Part No.
Description
HAR 7411.10
Furling system
Toggle Assembly Required - sold separately
HAR 7411.20 1/2
Eye/Jaw reversible toggle assembly with
1/2" (12.7 mm) clevis pin
HAR 7311.20 1/2
Jaw/Jaw toggle assembly with
1/2" (12.7 mm) clevis pin
HAR 7311.20 5/8
Stud/Jaw toggle assembly with
5/8" (15.9 mm) clevis pin (thread Ø UNF 5/8"
LH)
HAR 7311.21 1/2
Long link plate with toggle assembly with
1/2" (12.7 mm) clevis pin
HAR 7311.21 5/8
Long link plate with toggle assembly with
5/8" (15.9 mm) clevis pin
Furling system
Toggle Assembly Required - sold separately
Optional Parts
HAR 7412.30
Extra 7' (2.13 m) luff foil extrusion
HAR 7412.31
Extra 9" (229 mm) connector with bushings
HAR 7425-17
-17 Rod adaptor stud (thread Ø UNF 5/8")*
HAR 7426-22
-22 Rod adaptor stud (thread Ø UNF 3/4")*
Optional Parts
Extra 7' (2.13 m) luff foil extrusion
HAR 7411.31
Extra 7" (178 mm) connector with bushings
HAR 7422-8
-8 Rod adaptor stud (thread Ø UNF 1/2")†
HAR 7423-10
-10 Rod adaptor stud (thread Ø UNF 1/2")†
884
061
†Use with conventional turnbuckle
Sailing
HAR 7411.30
909
944
7404
Harken Jib Reefing & Furling Parts
Part No.
Description
HAR 061
Stanchion mount base
HAR 884
Snap shackle for tack/head (each shackle)
HAR 909
Extra 6" (152 mm) connector
HAR 944
HAR 7404
Halyard restrainer (use only when required)
Lead block kit: 3 x 7403/1 x 7402/1 x 7401/1 cleat
330
Harken
ESP Jib Reefing
& Furling
1
FOR CRUISING SAILORS
The ESP Furler is designed for the
cruiser looking for an easy-to-assemble
furler with an elegant design. Install a
Harken® ESP Furler and trim safely from
the cockpit when it blows; unfurl instead
of motoring when it’s light, for a great day
of sailing.
DETAILS MAKE THE DIFFERENCE
2
3
EASY ASSEMBLY AND INSTALLATION
Foils slip over the standard marine eye and headstay wire for easy installation. The adjustable bottom foil fine-tunes the system length. Shackle at the tack and head attach the sail
to the furler, with sail shape controlled by halyard tension. There is no need to cut the wire
during installation.
STANDS UP TO ELEMENTS
Spool is made from Hard Lube-anodized aluminum. Cover, flange, and guard are molded
from glass reinforced polymers for high strength. Foils are clear-anodized for durability.
The stainless steel sail feeder is strong and durable.
Sailing
LONG, MEDIUM, OR SHORT LEG KITS TO ADJUST DRUM HEIGHT
Medium and long leg kits raise the drum to clear the anchor, reduce sail chafe, and increase
visibility. Removable clamp screws allow legs to pivot out of the way for easy access to the
turnbuckle. Choose the long leg kit when using a turnbuckle with swage, Norseman or StaLok® terminals.
Medium leg kits work with a variety of turnbuckles; refer to height chart on unit pages.
Choose the short leg kit when the furler attaches directly to a marine eye at the bottom
of the stay. Short legs allow the sail to be closer to the deck.
OPTIONS
An optional halyard deflector, installed above the foil, prevents the jib halyard and other halyards
(such as a spinnaker or additional jib halyards) from wrapping around the foil when furling.
Strong, lightweight stanchion-mounted blocks are offered to lead line aft for safe
furling from the cockpit.
1. Single-Groove Round Foil
Round foil profile withstands extreme
reefing loads for secure furling. Rolls
more easily than flat foil shapes.
2. Strong Foil Joints
Tough foil joints withstand years of
torque loading. Connector interlocks
with foil and secures with screws.
No extra adhesive needed for a
secure lock.
3. Long, Medium, or Short
Leg Kits
Choose long or medium leg kits
for furlers with turnbuckles. Check
turnbuckle length to determine
which leg kit length is required.
Choose short leg kits when furler
attaches directly to a marine eye
fitted to the end of the stay.
Line not included
DO NOT use Harken equipment for human suspension.
Sta-Lok® is a registered trademark of Sta-Lok Terminals, Ltd.
175
331
Harken
7420 -4
7421 -8
7422 -8
7423 -10
OPTIONAL PARTS
HFG594
HFG233
Optional
7320.30
7321.30
7320.31
7321.31
ESP
Unit 0
Typical Boat Length 6 - 8.5 m (20' - 28')
Wire Ø
Rod Ø
Clevis pin Ø
4, 5 mm (5/32", 3/16")
-4 (4.37 mm)
8 mm, 9.5 mm (5/16", 3/8")
Standard 10.92 m (35'10"); max 12.92 m (42'5")
Headstay Length*
Part No.
Description
7320.10
Furling system
Leg Kit Required - order separately See toggle and rigging options page 182
7320.20 5/16**
Short leg kit with toggle with 8 mm (5/16") clevis pin. Not for turnbuckle
7320.20 3/8**
Short leg kit with toggle with 9.5 mm (3/8") clevis pin. Not for turnbuckle
7320.21 5/16‡
Long leg kit with toggle with 8 mm (5/16") clevis pin
7320.21 3/8‡
Long leg kit with toggle with 9.5 mm (3/8") clevis pin
Optional Parts
7320.20 5/16
7320.20 3/8
7321.20 7/16
7321.20 1/2
Pin-to-pin
measurement points
7320.30
Extra 2 m (6.5') luff foil extrusion
7320.31
Extra 216 mm (8.5") standard connector with bushings
7420 -4
-4 rod adaptor stud (thread Ø UNF 7/16")
HFG594‡‡
7 mm x 16.8 m (55') polyester double braid line. Line not included
*When using long leg kits add .13 m (5"). **Use without turnbuckle. ‡Use with conventional turnbuckle.
‡‡To use own line, figure 2 X boat length.
7321.22 7/16
7321.22 1/2
7320.21 5/16
7320.21 3/8
7321.21 7/16
7321.21 1/2
ESP
Unit 1
Typical Boat Length 7.9 - 10.6 m (26' - 35')
Optional Parts
271 mm
105/8"
Medium Leg Kit
Max turnbuckle
length
Long
leg kit
Sailing
Wire Ø
Rod Ø
Clevis pin Ø
6, 7, 8 mm ( 7/32", 1/4", 9/32", 5/16")
-6, -8, -10 (5.03, 5.72, 6.35 mm)
11, 12.7 mm (7/16", 1/2")
Standard 13 m (42'7"); max 17 m (55'8")
Headstay Length*
Part No.
Description
7321.10
Furling system
Leg Kit Required - order separately See toggle and rigging options page 182
7321.20 7/16**
Short leg kit with toggle with 11 mm (7/16") clevis pin. Not for turnbuckle
7321.20 1/2**
Short leg kit with toggle with 12.7 mm (1/2") clevis pin. Not for turnbuckle
7321.22 7/16‡
Medium leg kit with toggle with 11 mm (7/16") clevis pin
7321.22 1/2‡
Medium leg kit with toggle with 12.7 mm (1/2") clevis pin
7321.21 7/16‡
Long leg kit with toggle with 11 mm (7/16") clevis pin
7321.21 1/2‡
Long leg kit with toggle with 12.7 mm ( 1/2") clevis pin
7321.30
Extra 2 m (6.5') luff foil extrusion.
Order 1 for stay lengths to 15.22 m (49'11")*
Order 2 for stay lengths to 17.22 m (56'6")*
7321.31
Extra 229 m (9") standard connector with bushings.
Order 1 for stay lengths to 15.22 m (49'11")*
Order 2 for stay lengths to 17.22 m (56'6")*
7421 -6
-6 rod adaptor stud (thread Ø UNF 7/16")
7422 -8
-8 rod adaptor stud (thread Ø UNF 1/2")
7423 -10
-10 rod adaptor stud (thread Ø UNF 1/2")
HFG233‡‡
7 mm x 21.3 m (70') polyester double braid line. Line not included
*Add for longer leg kits. Medium leg .095 m (33/4") Long leg .22 m (81/2"). **Use without turnbuckle.
‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit.
‡‡To use own line, figure 2 X boat length.
178
Medium
leg kit
Short
leg kit
332
Harken
Optional
HFG235
7424 -12
7425 -17
7426 -22
7427 -30
7428 -40
OPTIONAL PARTS
7322.30
7323.30
7322.31
7323.31
ESP
Unit 2
Typical Boat Length 10.4 - 14 m (34' - 46')
Wire Ø
Rod Ø
Clevis pin Ø
-12 -17, -22 (7.14, 8.38, 9.53 mm)
15.9, 19.1 mm (5/8", 3/4")
8, 10, 12 mm (5/16", 3/8", 7/16")
Standard 17.05 m (55'11"); max 21.05 m (69')
Headstay Length*
Part No.
Description
7322.10
Furling system
Leg Kit Required - order separately See toggle and rigging options page 182
7322.20 5/8**
Short leg kit with toggle with 15.9 mm (5/8") clevis pin. Not for turnbuckle
7322.20 3/4**
Short leg kit with toggle with 19.1 mm (3/4") clevis pin. Not for turnbuckle
7322.22 5/8‡
Medium leg kit with toggle with 15.9 mm (5/8") clevis pin.
7322.22 3/4‡
Medium leg kit with toggle with 19.1 mm (3/4") clevis pin.
7322.21 5/8‡
Long leg kit with toggle with 15.9 mm (5/8") clevis pin
7322.21 3/4‡
Long leg kit with toggle with 19.1 mm (3/4") clevis pin
Optional Parts
7322.30
Extra 2 m (6.5') luff foil extrusion.
Order 1 for stay lengths to 19.33 m (63'5")*
Order 2 for stay lengths to 21.33 m (70')*
7322.31
Extra 24 cm (9.5") standard connector with bushings.
Order 1 for stay lengths to 19.33 m (63'5")*
Order 2 for stay lengths to 21.33 m (70')*
7424 -12
-12 rod adaptor stud (thread Ø UNF 5/8")
7425 -17
-17 rod adaptor stud (thread Ø UNF 5/8")
7426 -22
-22 rod adaptor stud (thread Ø UNF 3/4")
HFG235‡‡
8 mm x 30.5 m (100') polyester double braid line. Line not included
*Add to length for longer leg kits. Medium Leg .175 m (7") Long Leg .305 m (12"). **Use without turnbuckle.
‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit.
‡‡To use own line figure 2 X boat length.
7322.20 5/8
7322.20 3/4
7323.20 7/8
7323.20 1
Pin-to-pin
measurement points
7322.22 5/8
7322.22 3/4
7323.22 7/8
7323.22 1
Sailing
ESP
Unit 3
Typical Boat Length 13.7 - 18.6 m (45' - 61')
Wire Ø
Rod Ø
Clevis pin Ø
12.7, 14, 16 mm (1/2", 9/16", 5/8")
-22, -30, -40 (9.53, 11.10, 12.7 mm)
22.2, 25.4 mm (7/8", 1")
Standard 21.15 m (69'5"); max 25.15 m (82'7")
Headstay Length*
Part No.
Description
7323.10
Furling system
Leg Kit Required - order separately See toggle and rigging options page 182
7323.20 7/8**
Short leg kit with toggle with 22.2 mm (7/8") clevis pin. Not for turnbuckle
7323.20 1**
Short leg kit with toggle with 25.4 mm (1") clevis pin. Not for turnbuckle
7323.22 7/8‡
Medium leg kit with toggle with 22.2 mm ( 7/8") clevis pin.
7323.22 1‡
Medium leg kit with toggle with 25.4 mm (1") clevis pin.
7323.21 7/8‡
Long leg kit with toggle with 22.2 mm (7/8") clevis pin
7323.21 1‡
Long leg kit with toggle with 25.4 mm (1") clevis pin
7322.21 5/8
7322.21 3/4
7323.21 7/8
7323.21 1
Unit 2
411 mm
161/8"
Unit 3
489 mm
191/4"
Medium Leg Kit
Max turnbuckle
length
Long
leg kit
Optional Parts
7323.30
Extra 2 m (6.5') luff foil extrusion.
Order 1 for stay lengths to 23.5 m (77'1")*
Order 2 for stay lengths to 25.5 m (83'8")*
7323.31
Extra 26.7 cm (10.5") standard connector.
Order 1 for stay lengths to 23.5 m (77'1")*
Order 2 for stay lengths to 25.5 m (83'8")*
7426 -22
-22 rod adaptor stud (thread Ø UNF 3/4")
7427 -30
-30 rod adaptor stud (thread Ø UNF 7/8")
7428 -40
-40 rod adaptor stud (thread Ø UNF 1")
*Use 7/16" (10, 12 mm) polyester double braid line not supplied by Harken. To figure line length use 2 X boat length
*Add to length for longer leg kits. Medium leg .215 m (81/2") Long leg .37 m (141/2"). **Use without turnbuckle.
‡Use with conventional turnbuckle. Check maximum turnbuckle length for medium leg kit.
Medium
leg kit
Short
leg kit
179
333
Harken
Integral Hydraulic
Backstay Adjusters
Harken’s integral hydraulic backstay adjuster provides the power
to optimize sail shape quickly. The cylinder features a built-in,
double-acting pump that delivers oil when the handle is both
pushed and pulled. This moves oil through the system twice
as fast as single-acting pumps on other integrals.
Assemblies include a hardcoat-anodized aluminum cylinder
and pump, valve, gauge, and stainless pump handle with three
attachment options: pin installs handle permanently; O-ring
secures handle in socket, but is not permanent; nonlocking
handle installs without O-ring and roll pin. All pins and plugs
are stainless steel. Cylinders include a clevis on both ends.
Standard eye-jaw toggles fit all Harken cylinders.
Easy-to-read, analog gauge located
at top of cylinder adjusts to four
positions for easy viewing; pressure
increments read 0-5 (0-5000 psi).
The pressure-release knob turns clockwise to close and pump,
counterclockwise to release. When closing the pump, the knob
cannot be over-tightened by hand, preventing damage to the
valve. Release speed depends on how far open the knob is turned.
Pressure relief is factory set to prevent crew from over-tensioning
the backstay.
An analog gauge with pressure increments reading 0-5 (0-5000 psi)
is prominently mounted at the top of the cylinder. The gauge
adjusts to four positions for easy viewing from the cockpit.
Harken integral backstay adjusters come in four sizes to fit
boats with 5 to 10 mm (7/32 to 3/8") wire—approximately
9 to 18 m (30 to 60 ft).
Harken recommends attaching a
toggle to the cylinder’s bottom clevis
to accommodate stay movement.
Standard eye-jaw toggles fit all
Harken cylinders.
Sailing
Blue Jacket 40, Tim Jackett, Bob Johnson, Island Packet Yachts — Blue Jacket Yachts photo
Max
wire Ø
in
mm
Stroke
in
mm
Pin center
length
(closed)*
in
mm
Weight**
lb
kg
Gap/pin
Ø
in
mm
@ 1000 psi
69 bar
lb
kg
Pull force***
@ 2000 psi @ 3000 psi
138 bar
207 bar
lb
kg
lb
kg
@ 4000 psi
276 bar
lb
kg
Breaking
load
lb
kg
Part
No.
- Size
HCI025110345BCC
-6
7 32
/
5.5
13.5
343
30
762
7.4
3.37
7 16
/
11.1
1243
564
2487 1128 3490 1692
HCI035130345BCC
-10
9 32
/
7
13.5
343
30
762
7.4
3.37
1 2
/
12.7
1243
564
2487 1128 3490 1692 4960 2250 12364 5608
HCI040160385BCC
-12
5 16
/
8
15.2
385
32.8
832
10.8
4.92
5 8
/
15.9
2098
952
4197 1904 6295 2855 8394 3807 20984 9518
5/8
10.8 4.92
15.9 2098 952
**Rod ends (forks) included in weights.
4197 1904 6295 2855 8394 3807 20984 9518
*** Max relief setting is 4500 psi/310 bar.
HCI045160385BCC
-17
/
9.5 15.2 385 32.8 832
*For pin center length open add stroke length to pin center length closed.
3 8
--
--
7000 3175
227
334
Harken
Carbo Racing Foil
The engineering resins in these strong, lightweight head
foils offer significant advancements over the weaker PVC
materials used by other manufacturers. The low-friction
twin headsail grooves are ultra-smooth, allowing hoists,
douses, and headsail changes to be easily and efficiently
executed. Impact resistance is unmatched, with far less foil
damage from loaded spinnaker poles, especially in cold
weather. Heat has little effect on stiffness.
Trim cap
Foils are UV protected and easy for the trimmer to see.
For mast-up installation, simply uncoil the foil and snap
onto the stay.
Aluminum Chafe Guard
An aluminum chafe guard keeps spinnaker sheets from
damaging the foil during high-speed jibes. Testing shows
this guard weighs the same as aramid fiber or composite,
and is impervious to wear, unlike UHMW plastic tape which
wears away quickly. A Harken chafe guard is included free
with the purchase of a 7000, 7001, or 7002 kit.
Feeder for smooth hoists:
Funnel-shaped stainless feeder
smoothly guides boltrope into
head foil for fast hoists.
Prefeeder: Hardcoat-anodized,
PTFE-coated aluminum rollers spin
freely on low-friction bushings.
Kit includes prefeeder.
Actual size
Unit 3
Unit 2
7006
7000
7001
7002
Unit 1
Unit 0
7000.30
7001.30
7002.30
7003
Sailing
Jeanneau Sun Fast 3600, 11.25 m (36'10") — Jeanneau photo
Max wire
Max rod
Extrusion
Max headstay
Ø
Ø
length
length
Part
No.
Description
in
mm
dash
mm
ft/in
m
ft/in
m
1/4
7000.9m Unit 0
6
-10
6.35
29'6"
9
33'6"
10.2
1/4
7000.12m Unit 0
6
-10
6.35
39'4"
12
43'4"
13.2
1/4
6
-10
6.35
49'2"
15
53'2"
16.2
7000.15m Unit 0
5/16
7001.12m Unit 1
8
-17
8.38
39'4"
12
43'4"
13.2
5/16
8
-17
8.38
52'6"
16
56'5"
17.2
7001.16m Unit 1
5/16
8
-17
8.38
65'7"
20
69'6"
21.2
7001.20m Unit 1
3/8
10
-25
10.31 52'6"
16
56'6"
17.2
7002.16m Unit 2
3/8
10
-25
10.31 65'7"
20
69'7"
21.2
7002.20m Unit 2
3
/8
10
-25
10.31 78'9"
24
82'9"
25.2
7002.24m Unit 2
7/16
11
-30
11.1 78'8.5"
24
82'9"
25.2
7003.24m Unit 3
7/16
11
-30
11.1 91'10"
28
95'9"
29.2
7003.28m Unit 3
7006
Replacement prefeeder —
—
—
—
—
—
—
—
7000.30 Unit 0 chafe guard
—
—
—
—
3'3"
1
—
—
7001.30 Unit 1 chafe guard
—
—
—
—
3'3"
1
—
—
7002.30 Unit 2 chafe guard
—
—
—
—
3'3"
1
—
—
*Weight without chafe guard. **Nominal dimensions only, actual luff tape dimensions are larger.
166
Spacer tube
length
ft/in
m
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
3'3"
1
—
—
—
—
—
—
—
—
Extrusion
weight
lb/ft
kg/m
.102
.152
.102
.152
.102
.152
.162
.241
.162
.241
.162
.241
.185
.275
.185
.275
.185
.275
.245
.365
.245
.365
—
—
2.5 oz 70 g
2.9 oz 82 g
3 oz
85 g
Full system
Luff tape
weight*
size**
lb
kg
in
mm
3.29
1.50
#5 (5/32)
4
4.29
1.95
#5 (5/32)
4
5.30
2.41
#5 (5/32)
4
6.99
3.18
#6 (6/32)
5
9.13
4.14
#6 (6/32)
5
11.25 5.10
#6 (6/32)
5
10.43 4.73
#6 (6/32)
5
12.90 5.83
#6 (6/32)
5
15.29 6.93
#6 (6/32)
5
20.08 9.10 #6 (6/32)/#7 (7/32) 5/6
23.31 10.57 #6 (6/32)/#7 (7/32) 5/6
3 oz
85 g
—
—
—
—
—
—
—
—
—
—
—
—
—
—
335
Harken
Ordering Battcar Systems
P
1. Determine system size
Components
The four sizes, Systems AA, A, B, and C,
are based on sail area (pages 136–143). If
you need to reduce car stack height on
mast, see Switch T-Track Battcar Systems
(pages 144-146).
Endstop, fixed
Track and Mounting Kit
System
size
AA
A
B
C
Maximum sail area
Monohull
Multihull
2
ft
m2
ft2
m2
350
32
275
25
600
56
500
46
900
83
700
65
1940 180 1510 140
E
Mainsail Area
P x E x .5
Typical boat length
Monohull
Multihull
ft
m
ft
m
to 37
to 11.3
to 30
to 9.1
37 - 50 11.3 - 15.2 30 - 40 9.1 - 12.2
50 - 60 15.2 - 18.3 40 - 50 12.2 - 15.2
60 - 90 18.3 - 27 50 - 70 15.2 - 21
2. Determine track quantity and type
Use Mainsail Luff Length chart on each system page to
determine number of track sections.
Headboard
Car Assembly
Slug-mount: Most common. Requires 1 slug-mount kit per
track section. Select slug that matches the mast’s bolt rope
groove shape.
Drill-tap: For masts without a bolt rope groove. Requires
1 splice link at each track joint.
Intermediate Car
3. Choose endstop kit
Quick-release: Includes screwpin or pinstop endstop for
bottom of mast and fixed endstop for the top.
Fixed: Includes two fixed endstops.
4. Choose cars
Batten Car
Options
(Mainsail Batten)
OR
Order 1 headboard, 1 Battcar for every full batten, and
use the Intermediate Car Chart to determine number of
intermediate cars.
Battcar/receptacle
Battcar/stud
Intermediate Car
CB system: All captive ball bearing components. Lowest
friction system for fast sail hoists, douses, and reefs.
Combination system: CB headboard and Battcars, Slider
intermediate cars. Reduces cost but uses CB in the most
critical load areas.
Slider system: All Slider components. Raise and lower sails
without battling a sail that gets jammed in the groove.
Intermediate Cars
Distance between battens*
m
Intermediate cars
between battens
8 or less
2.4 or less
1
9 - 13
14 - 16
2.7 - 4
4.3 - 4.9
2
3
*Boats without full battens should use 1 intermediate CB or Slider car per 1.2 m
(4 ft) and no Battcars.
5. Contact
If you have any questions, please contact your dealer or
Harken Technical Service.
134
Ask for a Harken Catalogue
Sailing
Endstop, fixed,
pinstop, or screwpin
ft
336
Harken Sport / Harken Hoisters
Harken Reflex Performance Sailing Gloves
A responsive performance sailing glove designed for active
line handling in all conditions. Black Magic palm material superior grip, lasting protection. Durable Black Magic finger
wraps - reduced seam bulk, increased dexterity.
▪▪Protective palm pad
▪▪Low-profile watch cut-out
▪▪Molded-rubber wrist closure
▪▪Pull-on tab for easy on/off
▪▪Mesh vents at base of fingers - a cool, custom fit
▪▪Reinforced fingertips
▪▪Molded-rubber guard strips on back
Harken Junior Spectrum 3/4 Finger Gloves
For active-line handling on dinghies where its low-profile, lightweight
and nimble design reduces bulk and fatigue on smaller hands.
▪▪Palm material and finger wraps provide the highest level of
abrasion resistance, protection, and durability
▪▪Finger wraps reduce seam bulk and increase dexterity
▪▪Mesh vents at base of fingers provide a cool, custom fit
▪▪Low-profile watch cutout
▪▪Pull-on tab for easy on and off
▪▪Reinforced fingertips
3/4 Finger
HGL 2083XS
Extra Small
HGL 2083SSmall
HGL 2083MMedium
HGL 2083LLarge
HGL 2083XL
Extra Large
HGL 2083XXL
Extra Extra Large
Junior 3/4
HGL 2086JM BLUE
HGL 2086JM PINK
Blue, Medium
Pink, Medium
HGL 2086JL BLUE
HGL 2086JL PINK
Blue, Large
Pink, Large
Adult 3/4
Harken Black Magic Sailing Gloves
Designed as an all-purpose, warm-weather sailing glove.
▪▪Durable double-thick Black Magic® palm material for
superior grip
▪▪Nylon Spandex mesh for super fit
▪▪Minimal stretch when wet
▪▪Dries soft
3/4 Finger
HGL 2086S BLUE
HGL 2086S PINK
Blue, Small
Pink, Small
HGL 2086M BLUE
HGL 2086M PINK
Blue, Medium
Pink, Medium
HGL 2517-C
HGL HAR 2339C
HGL HAR 2397C
HGL 2563JM
Junior Medium
HGL 2563XS
Extra Small
HGL 2563SSmall
HGL 2563MMedium
HGL 2563LLarge
HGL 2563XL
Extra Large
HGL 2563XXL
Extra Extra Large
Harken Hoisters
Sailing
Hoisters lift evenly from one, two or four points. Choose your system based on the shape
and weight of the items you want to store. All standard Harken Hoisters are fully rigged
and set up for maximum vertical lift (ceiling height) of 8’ 6”. Here are a few storage ideas
for different Hoister systems:
1-Point Bike/Utility Lift: bikes, garden equipment
2-Point Storage System: kayaks, ladders, tandem/recumbent bikes, removable seats
4-Point Storage Systems: canoes, dinghies, car top sports equipment carriers, Jeep tops,
truck caps, storage shelves
When selecting your Hoister consider the following:
1. The weight of the item to be stored
2. The desired vertical lift distance
Standard Hoister system specifications:
Lifting
Points
Working Load
Limit
Min. Lifting
Load
Max. Vertical
Lift
Mechanical
Advantage
HOI 7800
1
45 lbs
10 lbs
8 ft
2:1
HOI 7808B
2
45 lbs
10 lbs
10 ft
2:1
HOI 7807
2
60 lbs
15 lbs
8.5 ft
3:1
HOI 7801
4
60 lbs
15 lbs
8.5 ft
3:1
HOI 7802
4
90 lbs
25 lbs
8.5 ft
4:1
HOI 7803
4
145 lbs
45 lbs
8.5 ft
6:1
HOI 7806
4
200 lbs
75 lbs
8.5 ft
8:1
Part #
Kevlar wallet, carbon black
Croakies eyeglass straps
Cap holder
337
Harken Sport / IYE / Lev-O-Gage / Plastream
Harken Roll-Top Wet/Dry Bag
Harken Deluxe Bosun's Chair
▪▪Roll-top closure at top for a watertight seal
▪▪Two roll-top fastening points to accommodate large
or small loads
▪▪Exterior mesh compartment with bonded zipper
opening at bottomseparates/dries wet gear
▪▪Reinforced bottom panel
▪▪Welded seams and components
▪▪Air-purge valve
▪▪Adjustable/removable carry straps also
function as backpack straps
▪▪Lightweight material and compressible design
▪▪YKK zippers
▪▪31” x 15” x 7”
Ensures comfortable sitting and lets you work aloft
with confidence. The chair is made of heavy-duty
polyester canvas with a ply seat padded with 1” thick
foam. Includes an adjustable safety belt and two
roomy pockets for tools. A carrying case is included.
▪▪Maximum load: 220 lbs
HGL 2234
Lev-O-Gage
HGL 2019
IYE Bailer
IYE Bailer
Chute design which forms a sump for the collection of water. The
aft facing and the non-return flap control temporary back flow.
External flange mounting. Plastic construction. All boxed bailers
are supplied with stainless fixing nuts and bolts, hole templates,
backing washers, where applicable and instructions.
IYE 202901
IYE 253001
Super shute 90: 5-3/8” x 3”
Super shute 60: 4-3/8” x 2-1/2”
IYE 2519
IYE 2521
IYE 2524
IYE 2525
IYE 2891
IYE 2905
IYE 2934
60 Grill
60 Wedge
60 Latch
60 Non-return flap
90 Chute assembly
90 Locking lever
90 Handle pin
Parts:
307-M
Lev-O-Gage Sailing Clinometers
▪▪Flex-tube, engraved white numerals
3.5" 45° Clinometer
3.5" 10° Levo-Gage II
6.5" 50° Senior
Plastream
Plastream Sail Battens
Made of tough composite plastic,
these battens are unbreakable.
Made entirely in stainless steel. Design to
mount from inside the boat. Supplied complete
with template, packing seals where applicable,
fixing bolts and nuts.
Type
Size mm
Cutout
mm
Mounting
BAI 158401
Super Mini
105 x 60
85 x 40
Internal
BAI 158301
Super Medium
142 x 80
105 x 40
Internal
BAI 158201
Super Max
135 x 79
110 x 54
Internal
Flexible reading light with a 360° swivel head,
using a 5 watt 12 volt halogen bulb. Permanent
mount.
PSB 102
PSB 106
PSB 108
PSB 109
PSB 116
PSB 118
PSB 119
PSB 120
PSB 126
PSB 128
PSB 129
PSB 130
5/8" x 12"
5/8" x 24"
5/8" x 30"
5/8" x 36"
1" x 24"
1" x 30"
1" x 36"
1" x 40"
1-3/8" x 24"
1-3/8" x 30"
1-3/8" x 36"
1-3/8" x 40"
PSB 135
Batten display
Batten Size
5/8” x 12”
5/8” x 24”
5/8” x 30”
5/8” x 36”
1” x 24”
1” x 30”
1” x 36”
1” x 40”
1-3/8” x 24”
1-3/8” x 30”
1-3/8” x 36”
1-3/8” x 40”
Pieces
6
4
2
2
4
4
4
2
2
4
4
3
Display contains a wall mountable
rack and the battens listed below.
135
Sailing
IYE Co Pilot Light
IYE 305300
7301-C
LEV 7301-C
LEV 307-M
LEV 303-M
IYE Bailers
Part #
303-M
338
RWO
RWO Sheaves
R1537
R1550
R1530
R1560
RWO plain bearing sheaves all have molded
acetal resin central bearings. Acetal is a
particularly good material for wear resistance and
high strength and low friction as a bearing. The
aluminum sheaves are machined from solid and
anodized to protect from corrosion and abrasion
resistance.
Part #
Dia
mm (ins)
Width
mm (ins)
Bore
mm (ins)
Rope
mm (ins)
5 (3/16”)
Acetal
RWO Stainless Blocks Micro 17
RWO R0900
17 (11/16”)
6 (1/4”)
6 (1”)
For general purpose use. They are economical,
reliable and extremely versatile with a variety
of head fixings and mounts, making them ideal
for small rope applications. All models have
stainless steel bodies and hollow axles, and are
maintenance free. Standard sheave is ‘Acetal’
high load self lubricating for conventional ropes
up to 6mm.
RWO R0901
19 (3/4”)
9 (5/16”)
6 (1/4”)
6 (1/4”)
RWO R0921
25 (1”)
10 (3/8”)
6 (1/4”)
8 (5/16”)
RWO R0922
25 (1”)
10 (3/8”)
8 (5/16”)
8 (5/16”)
RWO R0923
25 (1”)
12 (1/2”)
6 (1/4”)
10 (3/8”)
RWO R0925
25 (1”)
13 (1/2”)
9 (5/16”)
10 (3/8”)
RWO R0924
28 (1-1/16”)
10 (3/8”)
7 (9/32”)
8 (5/16”)
RWO R0930
32 (1-1/4”)
8 (5/16”)
6 (1/4”)
4 (5/32”)
RWO R0940
38 (1-1/2”)
14 (9/16”)
9 (5/16”)
10 (3/8”)
RWO R0943
38 (1-1/2”)
15 (5/8”)
13 (1/2”)
10 (3/8”)
RWO R0960
44 (1-3/4”)
15 (5/8”)
10 (3/8”)
12 (7/16”)
RWO R0970
57 (2-1/4”)
16 (5/8”)
14 (9/16”)
12 (1/2”)
RWO R0990
88 (3-1/2”)
15 (5/8”)
10 (3/8”)
12 (1/2”)
R4959
Sheave Size�������������������������������������17mm
Max. line size�������������������������������������6mm
Shackle pin dia����������������������������������5mm
Breakload�����������������������������������������225kg
R4969
RWO R1530Single
RWO R1550
Single & clevis pin
RWO R1537
Micro single + brass
RWO R1560
Single micro
RWO R4959
“V” Jammer single & becket
RWO R4969
Double & becket V jammer
R1000
R1080
Aluminum
RWO R0927
25 (1”)
8 (5/16”)
9.5 (3/8”)
3 (1/8”)
RWO R0911
28 (1-1/16”)
12 (1/2”)
10 (3/8”)
3 (1/8”)
R1410/1420
RWO Stainless Aeroblocks 25 mm
R1610
Lightweight ‘Space frame’ electropolished stainless
steel body, a large pivoting hollow axle and light
grey acetal sheave.
R1620
Sheave Size..............................................25mm
Max. line size...........................................8 /10mm
Breakload..................................................600kg
R1690
RWO Stainless Blocks 25
RWO R1123
RWO R1132
RWO R1133
R4961
Sailing
Same features as the Micro 17 above for
ropes up to 10mm.
Sheave Size��������������������������������� 25mm
Max. line size��������������������������������� 8mm
Shackle pin dia������������������������������ 5mm
Breakload...................................... 650kg
RWO R1000
RWO R1080
RWO R1410
RWO R1420
RWO R1430
RWO R1610
RWO R1620
RWO R4960
RWO R4961
RWO R4970
25mm single
25mm double & shackle
25mm bullet budget
25mm bullet (8mm)
25mm bullet (10mm)
25mm mini
Micro single
Vang single 25mm
Vang fiddle 25mm
Vang double 25mm
R4960
R4970
Single open swivel, 8mm
Single & becket, 10mm
Single open swivel, 10mm
339
RWO
R3670
RWO Grippit
Popular economically priced camcleats.
Cams in anodized aluminum alloy with
Hi-tech ‘acetal’ axial bearing surfaces to
ensure minimum weight and good operational
resilience to corrosion and extreme usage.
Part #
RWO R3640
R3650
Line
Height
Hole Centres/Fix
Hold
5-12mm
21mm
38/5mm
160kg
RWO Jam Cleats
R3631
Self jamming cleats. Useful for control lines, downhauls and
halyards.
Part #
RWO R3631
R3591
RWO Lance Cleats
R3632
Construction
Rope
Length
Pack
Black Plastic
5mm
70mm
2
RWO R3632
Black Plastic
8mm
90mm
2
RWO R3650
Stainless Steel
6mm
64mm
1
RWO R3670
Blk Plastic Tubular
6mm
54mm
1
R3595
A unique design utilizing the cam cleat principle. Uses a single
rugged aluminum cam mounted vertically in a black moulded
reinforced stainless steel frame. Just slide the rope sideways and it
runs freely in the fairlead. Available in two sizes with three different
colour rollers to simplify line identification, or metal for heavier
loads, and available for either port or starboard applications.
Metal
Cam
Rope
mm
R3593
R3597
Port
3-6
R3595
R3596
R3598
Starboard
3-6
R3602
R3603
R3607
Port
5-10
R3605
-
-
Starboard
5-10
Part # Blue
Green
RWO R3591
R3592
RWO R3594
RWO R3601
RWO R3604
Red
R3952
R3940
R3920
R3932
R3912
RWO Horn Cleats
RWO Budget Cleat
In five sizes, suitable for halyard control lines or mooring cleats
for the range of ropes. Generous base area allows the cleat to be
secured firmly.
Direct replacement for original equipment
Laser cleats.
Part #
RWO R3570
Line
Height
Hole Centres/Fix
Hold
6-12mm
22mm
42/5mm
85kg
Part # Black
# White
Rope
Length
Pack
RWO R3912
RWO R3910
3mm
65mm
2
RWO R3922
RWO R3920
5mm
100mm
2
RWO R3932
RWO R3930
6mm
140mm
2
RWO R3942
RWO R3940
8mm
180mm
1
RWO R3952
RWO R3950
10mm
215mm
1
Sailing
340
RWO
RWO Telescopic eXtensions
Transat Marine Tiller Extensions
Hiking sticks will help to increase your sailing
performance by enabling you to change the extension
length ‘at will’, giving more comfort control
and freedom of movement. To get the optimum
performance from your boat, its balance on all points
of sailing is paramount. Adjustable extensions allow
the helm to move further forward or out to windward
to achieve this. Lightweight anodized aluminum tube
with a clearly indicated one way lock-unlock twist
mechanism allowing infinite adjustment over length
range. The nonslip foam supagrip and the contoured
fluted end, give the helm a positive response in the
wettest conditions.
Please call Transat Marine for details.
RWO R0512
RWO R0513
Omni 16 70-120mm
Omni 16 90-150mm
RWO Fixed Length eXtensions
These Fastac tiller eXtensions have been designed to increase
sailing performance and comfort, by providing the skipper of
any boat with a strong, reliable and easy-to-use piece of quality
equipment. Manufactured from hard drawn aluminum (tube) and
fitted with a foam handle.
20 mm tube
RWO R061436”
RWO R061542”
RWO R061648”
16 mm tube
RWO R083124”
RWO R083330”
RWO R083436”
RWO R083542”
RWO R083648”
Sailing
► Also See
Tiller Extensions pg 294 & 368
TSM HBO24
TSM HBO27
TSM HBO30
TSM HBO36
TSM HBO42
Button/Omni, 24”
Button/Omni, 27”
Button/Omni, 30”
Button/Omni, 36”
Button/Omni, 42”
TSM HBS24
TSM HBS27
TSM HBS30
TSM HBS36
Button/Swivel, 24”
Button/Swivel, 27”
Button/Swivel, 30”
Button/Swivel, 36”
TSM HGO24
TSM HGO27
TSM HGO30
TSM HGO36
TSM HGO42
TSM HGO48
Golf/Omni, 24”
Golf/Omni, 27”
Golf/Omni, 30”
Golf/Omni, 36”
Golf/Omni, 42”
Golf/Omni, 48”
TSM HGS24
TSM HGS27
TSM HGS30
TSM HGS36
TSM HGS42
Golf/Swivel, 24”
Golf/Swivel, 27”
Golf/Swivel, 30”
Golf/Swivel, 36”
Golf/Swivel, 42”
341
RWO
RWO Tiller Hardware
Three main types of swivels are offered including a stainless
steel swivel with a plastic connector to fit inside the tube (as
R0855). An all stainless steel version to fit the outside of the
tube (as R0851) for extra strength. An all-plastic polymer
Omniflex connector.
▪▪Elastomeric polymer of the highest quality, as used on
sailboard mast knuckles and industrial hinges
▪▪Completely omni-directional in operation and capable of
many millions of flexures without failure
▪▪Screw holes pitch is identical to our existing stainless steel
base so is interchangeable
▪▪For 16mm tubes
R0851
R0854
R0500
Swivel - Stainless Steel
RWO R0500
RWO R0851
RWO R0854
RWO R0855
Screw down 20mm
Screw down 16mm
Screw down square
Screw down 16mm
R0842
R0840
R0855
Swivel - Omniflex
RWO R0840
RWO R0842
RWO R0844
RWO R0858
Swivel 16mm
Core 16mm
Supple 16mm
Core 20mm
R0844
R0858
Tiller Tube Accessories
16mm
20mm
-
-
-
-
-
-
R0770
-
R0771
25mm
R0712
-
R0684
R0691
R0692
-
Pack
2
-
2
-
-
2
R0757
R0758
-
-
2
-
-
2
-
1
-
1
R0685
-
R0686**
-
R0719
50mm
R0715
R0716
-
-
38mm
R0711
R0756
R0683
32mm
R0713
R0687
-
** Limited Quantity
R0712
R0719
R0711
R0683
RWO Webbing Loops
M25 webbing, white plastic, (2/pkg)
M25 bridge, black plastic, (2/pkg)
M40 bridge, black plastic, (2/pkg)
M50 bridge, black plastic, (2/pkg)
RWO Oarlocks
Rowlocks for use in production boats to 3.5 meters.
RWO R5030
RWO R5032
RWO R5022
Body 50mm (each), White
Body 50mm (each), Black
Body & 5052 top mount (pair)
Please ask for a RWO Catalogue for a full listing of products
Sailing
RWO R3262
RWO R3263
RWO R3267
RWO R3269
342
RWO
RWO Rudder Hardware
Range of anodized aluminum fittings & reinforced nylon transom mounts offer excellent
strength, great rigidity, exceptional choice and are lightweight. Transom Mounts have 2
pintle diameters and two or four hole fixing. The transom/pivot distance is 15mm (9/16”)
which can be increased by the use of packing pieces.
▪▪Sold by the each.
R3763
Rudder Strap Fittings
Pintle Strap
Gudgeon Strap
Stock
Width
Short N
30mm
R3702
-
-
R3722
-
-
38mm
-
-
R3713
R3723
-
R3733*
30mm
R3752
-
-
R3712
-
-
38mm
-
R3753
-
-
R3773
R3783
3mm
R3743
R3793
R3793
R3743
R3793
R3793
4mm
R3744
R3794
-
R3744
-
-
6mm
R3746
-
-
R3746
-
-
Strap
Packers**
Short W
Long W
Short N
Short W
R3773
Long W
* Request Item
** All strap packers sold in packs of two
Rudderheads w/Hoods
W mm
A mm
B mm
C mm
D mm
X mm
Y
P mm
RWO R0781
Part #
21
100
197
266
166
203
0°
8
R0735
Gudgeon
R0745
Pintle
RWO R0783
21
100
213
330
129
223
4°
8
R0736
R0746
Transom Fittings
▪▪Aluminum and reinforced nylon construction
R0736
Pintle
Aluminum
2 Hole
4 Hole
8mm Pin
R0745
9.5mm Pin
-
5mm Packer**
-
Gudgeon
Nylon
2 Hole
4 Hole
Aluminum
2 Hole
4 Hole
Nylon
2 Hole
4 Hole
R0746
R3822
R3823
R0735
R0736
R3820
R3821
R0747
R3827
R3828
-
R0737
R3825
R3826
R0739*
R3828
-
Sailing
* Request Items
** All packers sold in packs of two
RF5 Pintle Sets 9.5 mm
▪▪Stainless steel construction
Part #
Description
P mm
W mm
L mm
F mm
RWO R0794
Gudgeon Rudder
9.5
37
115
6
RWO R0733
Gudgeon Transom
9.5
-
100
6
RF4 Pintle Sets 9.5 mm
R0732
R0794
▪▪Stainless steel construction
Part #
Description
P mm
L mm
F mm
RWO R0732
Gudgeon Transom
9.5
80
5
R0733
343
RWO
RWO Stainless Steel Rudder Hardware
Constructed to the highest standard and electro polished.
As a guide for usage 6mm. (1/4”) pins are suitable for boats up to 3m (10ft), 8mm pins (5/16) for up to 3.5m (12ft) dinghies
and 9.5mm 3/8 up to 6.6m (22ft) dayboats. Also to be taken into consideration are many other factors such as the boat’s
displacement, rudder size and transom, depth etc. Retaining clips spring rests on rudder or transom gudgeon to prevent
release of rudderhead.
▪▪Sold by the each
R0767
R0602
R0791
R0620
R0601
R0604
R0621
Part #
Description
Pin mm
W mm
L mm
F mm
Boat Max.
R0630
R0747
RF1 Pintle Sets 6mm
RWO R0621
Pintle Rudder
6
12
75
4
3m
RWO R0620
Gudgeon Transom
6
-
50
4
Pram
RF2 Pintle Sets 8mm
RWO R0601
Pintle Rudder
8
13
60
5
3.5m
RWO R0604
Pintle Rudder
8
19
60
5
12’
RWO R0602
Pintle Rudder
8
25
70
5
Light
RWO R0630
Gudgeon Transom
8
-
50
5
Dinghy
RWO R0765
Retaining Clip
-
-
75
5
n/a
RWO R0760
Retaining Clip
-
-
38
5
n/a
RWO R0767
Retaining Clip
-
-
80
5
n/a
80
5
5.8m
RF4 Pintle Sets 9.5mm
R0792
R3828
R03826
RWO R0791
Pintle Rudder
9.5
28
RWO R0792
Gudgeon Transom
9.5
28
80
5
19’
RWO R0742
Pintle Transom
9.5
-
80
5
Large
RWO R0747
Ali Transom Pintle
9.5
-
75
5
Dinghy
RWO R0737
Ali Gudgeon
9.5
-
36
5
Dayboat
RWO R0767
Retaining Clip
-
-
80
5
n/a
RWO R3828
Pintle Transom
9.5
-
75
5
n/a
RWO R3826
Gudgeon Transom
9.5
-
75
5
n/a
Sailing
344
RWO
RWO Bushes
Use bushes to protect lines from chafe and ensure easy running
through decks and spars. Available in pushfit and screw down
they are well-flared at both top and bottom and manufactured
from acetal resin. Also available with stainless steel ferrules for
leading wire or “Hi tech” lines. Bushes without fixing holes can
be pressed or glued into place.
R2060
R3034
R2220
RWO Bungs
All the choice you need for transom or buoyancy tank drains.
Three types available, push-fit rubber bung version, a half turn
bayonet and a screw thread + ‘O’ seal all with matching sockets.
Both bayonet and screw bungs are fitted with a retainer to
prevent loss.
Sold two per pack.
R2066
R3110
R2221
R3030
R3134
R2210
R2067
Black #
White #
R3032
R2062
Type
D mm
R2217
C mm
F mm
X mm
H mm
Spare Bungs
Drain Bung
-
RWO R2060
Bayonet
17
22
4
36
-
RWO R2064 + Seals RWO R2062
17
22
4
36
-
+ Seals RWO R2067
RWO R2066
-
Screw
RWO R2067
-
Screw
RWO R2210
-
Push
9
16
3
28
-
RWO R2217
RWO R2220
-
Push
16
22
4
35
-
-
RWO R2221
-
Push
19
25
4
42
-
-
Bushes Screw Down
RWO R3112
RWO R3110
Plain
9
16
3
28
9
RWO R3122
-
Plain
12
19
4
31
9
RWO R3132
-
Plain
16
22
4
35
9
Plain
19
25
4
42
12
RWO R3152
RWO R3114
-
Ferruled
8
16
3
28
9
RWO R3124
-
Ferruled
11
19
4
31
9
RWO R3134
-
Ferruled
14
22
4
35
9
RWO R3154
-
Ferruled
17
25
4
42
12
Sailing
Bushes Push Fit
RWO R3032
RWO R3030
Plain
6
9
-
-
9
RWO R3042
RWO R3040
Plain
9
13
-
-
13
RWO R3052
-
Plain
13
14
-
-
16
RWO R3034
-
Ferruled
5
9
-
-
9
RWO R3044
-
Ferruled
8
13
-
-
13
RWO R3054
-
Ferruled
11
14
-
-
16
Please ask for a RWO Catalogue for a full listing of products
345
RWO
RWO Bullseyes and Fairleads
Moulded from high load bearing acetal resin to provide maximum resistance to wear. Bullseyes
are available with stainless steel ferrules for leading wire or Hi-tech ropes.
Sold two per pack.
R3222
R2980
R2600
R2984
R2942
R2602
Black #
White #
Liner
D mm
F mm
X mm
L mm
H mm
W mm
Bullseyes
RWO R2932
RWO R2930
Plain
6
3
15
30
14
9
RWO R2942
RWO R2940
Plain
12
5
24
44
23
14
RWO R2982
RWO R2980
Plain
19
5
33
57
30
19
RWO R2934
-
S/S Ferrule
5
3
15
30
14
9
RWO R2944
-
S/S Ferrule
14
5
24
44
23
14
RWO R2984
-
S/S Ferrule
18
5
33
57
30
19
Bridges
RWO R3212
RWO R3222
RWO R3220
Plain
6
3
15
25
11
9
Plain
8
4
20
31
16
12
RWO R3232
-
Plain
10
5
23
36
18
14
RWO R3252
-
Plain
12
5
25
40
22
14
RWO R2600
-
Plain
12
5
-
70
-
-
RWO R2602
-
Plain
12
5
-
80
-
-
Fairleads
RWO Inspection Covers
Allow access to remote areas behind
bulkheads inside water tanks or under
decks. Two models are available. The
screw thread closure with an ‘O’ ring
seal in four sizes ensures watertight
security.
▪▪Available in black, white or clear
Part # White
Black
Clear
Nominal Dia
Cutout
Fasteners
RWO R4040
RWO R4042
RWO R4043
100mm
108mm
3mm x 6
RWO R4050
RWO R4052
RWO R4053
125mm
140mm
3mm x 6
RWO R4060
RWO R4062
RWO R4063
150mm
157mm
3mm x 8
RWO R4080
RWO R4082
RWO R4083
200mm
220mm
4mm x 8
RWO Cover Accessories
RWO R4045
RWO R4055
RWO R4065
RWO R4085
RWO R4047
RWO R4057
RWO R4067
‘O’ Ring seal 100mm (2 pack)
‘O’ Ring seal 125mm (2 pack)
‘O’ Ring seal 150mm (2 pack)
‘O’ Ring seal 200mm (2 pack)
Barnie bag 100mm (misc. colours) each
Barnie bag 125mm (misc. colours) each
Barnie bag 150mm (misc colours) each
R4047
Sailing
Made from random bright colours with top gusset and draw string
available for three smaller sizes of screw inspection covers, to
provide good dry secure storage for drinks, food, tools, valuables or
any other necessity! Light and flexible making them ideal for shallow
sided tanks - easily removable to carry away from the boat.
346
RWO
RWO Slides & Fairleads
S/Steel track features an underside curvature to allow for stable fixing to curved
surfaces, measures 16mm.(5/8”) internal width, counter punched 76mm (3”) pitch for
5mm (3/16”). Holes are also punched at 19mm (3/4”) pitch to allow for location of
plunger, end stops and fairlead sliders.
Sold by the each.
Part #
Description
Aperture
Length
Fastener
R2760
ID
RWO R2741
Take Off Loop
37
-
11mm
RWO R2751
ASR2741 & Eye Loop
65
-
11mm
RWO R2760
Thumbscrew Adjust Trackstop
26
-
-
RWO R2761
Trackstop Plunge Adjust
25
-
-
RWO R2770
End Stop, Plastic
15
5
RWO R2701
S/S Track
330
5
-
RWO R2702
S/S Track
610
5
-
R2751
R2741
R2770
R2761
RWO Deck Fittings
▪▪Strip anchorages in polished stainless steel to suit most types of
hull or gunwhale
▪▪Mast step in stainless steel to suit 20mm inch tenons
▪▪Stainless steel and plastic anchorage plates
Part #
Length
mm
Description
Width
mm
Thick
mm
Pin
mm
Fixings
R2010
Pack
Deck Fittings & Stem Heads
RWO R2010
Mast Step
138
-
-
5
3 x 5mm
1
RWO R2350
Channel Adjustor
100
-
-
5
3 x 5mm
1
Stem Head
84
-
-
5
6 x 5mm
1
RWO R2150
S/S Strip
25
12
1.6
-
2 x 5mm
2
RWO R2160
S/S Strip
40
12
1.6
-
2 x 5mm
2
RWO R2120
S/S Strip
54
16
1.6
-
2 x 5mm
2
RWO R2130
S/S Strip
76
16
1.6
-
2 x 5mm
2
RWO R2240
S/S Strip
100
19
1.6
-
3 x 5mm
1
RWO R2250
S/S Strip
127
19
1.6
-
4 x 5mm
1
RWO R2260
S/S Strip
150
19
1.6
-
4 x 5mm
1
RWO R2280
S/S Strip
203
19
1.6
-
5 x 5mm
1
RWO R2390
Shroud Plate
165
25
3.0
-
4 x 8mm
1
Sailing
RWO R2410**
RWO R2870
RWO R2880
RWO R2891
RWO R3284
** Limited Quantities
40mm anchorage plate, S/S
50mm anchorage plate, S/S
50mm anchorage plate, black plastic
50mm webbing buckle, S/S & plastic
RWO Stainless Steel Strip
RWO R2140
100mm x 19mm, 3 fittings
R2350
R2150
R2410
R2891
R2880
R3284
347
RWO
RWO Roller Traveller Systems
The XT1 Roller Traveller System suitable for dinghies and dayboats up to 6 metres (20ft).
Operates on a specially designed track section that allows the angled rollers to operate freely
under all conditions even when angular loads are applied.
The cars have rugged take off points, open-linked to reduce height and allow immediate
attachment of mainsheet systems and pivot to permit take-off angles of up to 40 . Add-ons
include control line blocks and beckets with or without cleat.
R3331
The car body is made from light weight stainless steel pressing and heavily ribbed for
strength.
R3367
The track is made from black anodised high grade corrosion resistant alloy, it is extremely
light, yet rigid enough to span limited distances unsupported.
XT1 - Cars & Accessories
Length
Break Load
R3290
Weight
Notes
RWO R3331
Car 4 Wheel
60
225
75 gms
RWO R3340
Car 4 Wheel & Control Sheaves
60
225
109 gms
RWO R3290
Track stop sliding
20
-
19 gms
Screw down type
RWO R3367
Replacement Wheels (4)
-
-
7 gms
Takes 8mm rope
RWO R3370
Trackend Stop
-
-
8 gms
5mm fixings x 4
RWO R3380
Trackend Stop + Sheave
-
-
40 gms
Takes 8mm rope
RWO R3303
XT1 track
910
-
380 gms
RWO R3305
XT1 track
1220
-
530 gms
#8 fasteners on
4” centres
R3370
XT1 Tracks
RWO Roller Traveller Systems
The XT2 Roller Traveller system suitable for sailboats up to 9 metres (30ft) using six wheel
cars and 7 metres (24ft) using the four wheel version. The traveller car is made from heavy
gauge stainless fitted with wide replaceable acetal rollers designed to run freely under load.
The strong closed link take off point allows immediate attachment of mainsheet systems and
permits take-off angles of up to 40°. Also suitable for boom vangs and outhauls on larger craft.
R3430
Add-ons include track mounting brackets, the cars can be converted to have up to 3:1 control
line purchase or a central line cleating cat adapter unit. XT2 Track can span a limited distance
unsupported.
XT2 - Cars & Accessories
Length
Break Load
Weight
RWO R3430
Traveller car 4 wheel
77
900
175 gms
RWO R3431
Traveller car 6 wheel
90
1200
200 gms
RWO R3467
Replacement wheels (4pk)
-
-
9 gms
R3431
RWO Genoa Cars
Description
Length
mm
Width
mm
Fast
mm
Hole
Ctr mm
RWO R2640
Fairlead Slide & Loop Plunger
85
35
-
-
RWO R2660
Genoa Sheet Block Car Plunger
120
35
-
-
RWO R2635
25mm Track
1220
25
6
100
RWO R2691
Trackend Stop (4 pack)
-
-
6
-
RWO R2750
Slotted 5mm Take Off & Loops
65
-
-
-
Part #
R2660
R2640
R2691
R2750
Sailing
Low profile sheet blocks have small diameter wide rollers keeping the sheeting
position close to the deck and coping with changes of direction. The robust spring
plungers locate positively in the track holes whilst the knob pull is profiled to
minimize rope snarl ups.
348
RWO
RWO Trapeze Gear
Hoist rings with a block and used in
conjunction with a trapeze jammer
give full height adjustment.
Part #
R4000
R4120
R4110
R4094
Description
Width mm
Height mm
RWO R4094
Nova Plain Bearing Block & S/S Loop
50
130
RWO R4000
S/S Hook for eyelets & 50mm webbing
90
95
RWO R4100
S/S Ring & Loop
52
190
RWO R4110
S/S Frame & Plastic Handle
115
130
RWO R4120
Plastic Handle
115
50
R4100
RWO QRH Quick Release Hooks
▪▪Stainless steel and glass filled nylon construction
▪▪Suitable for any trapezing boat
▪▪Push button release
▪▪Fits existing harnesses
▪▪Choice of frame mounts and hook attachments
▪▪Works facing up or down
▪▪Use 40mm webbing
R4028
R4020-29
RWO R4020
RWO R4029
RWO R4028
Spreader bar (std), W: 230 x H: 90mm
Spreader bar (small), W: 170 x H: 90mm
Small plate, W: 90 x H: 95mm
RWO R4023
Hook & retainer (spare)
R4023
RWO Spinnaker Handling
The pole end design is critical for function strength and weight, with a fast positive easy
catch operation. Fixed mast eyes, crane, guy catcher, uphaul eye and shroud rollers are all
manufactured in electropolished stainless steel.
Sailing
Part #
Description
Dia. mm
Length mm
RWO R4220
Pole End for Dinghies
25
35
RWO R4230
Pole End Dinghies/Dayboat
32
37
RWO R4240
Pole End for Dayboat/Small Yacht
38
45
RWO R4250
Mast Eye 5mm Ring
17
-
RWO R4252
Mast Eye 6mm Ring
32
-
RWO R4260
Spinnaker uphaul eye
-
-
R4250
R4230
R4252
RWO
349
RWO FG1 System Furling Gear
For dinghies and day boats up to Flying Dutchman
size 6 metres. Utilizing either the single or endless
line principle (10% reductions for multi-hulls). The
FG1 gear has stainless steel spindles and ball bearings
to enhance working loads. The drum on the bottom
swivels is of moulded acetal, secured to a high grade
anodized aluminum body. Both top and bottom swivels
have a plastic insert to prevent sail chafe. They have a
break strength of 900kgs, (2000lb) and a fork spindle
on the drum to fit most stemhead fittings. Endless line
furling gear operates by pulling the line to furl. To unfurl
uncleat and pull sheet.
Part #
R2081
R2070
R2080
R2090
R2082
Description
Length mm
Dia. mm
Pin mm
Break Load Kg
Forestay Guide
-
-
-
-
RWO R2080
Top Swivel
28
10
5
900
RWO R2081
Top Swivel & Guide
28
10
5
900
RWO R2082
Top Swivel
26
5
5
450
RWO R2090
Drum & Fork Endless Line
45
10
5
900
RWO R2200
Drum & Fork Single Line
45
10
5
900
RWO R2070
R4395
R4390
R2200
R4440
R4410
R4415
RWO Rigging Adjusters
Stay adjusters allow wire rigging systems to be altered by means of
a clevis pin. All models constructed from stainless steel strip with
different sizes and spacings.
Pin
mm
Length
mm
Range
mm
# of Adj x
Increments
RWO R4390
5
100
48
7 x 8mm
RWO R4395
5
750
806
16 x 5mm
RWO R4410
5
150
76
7 x 13mm
RWO R4415
6
100
80
16 x 5mm
RWO R4440
5
95
57
8 x 8mm
Part #
Sailing
350
RWO
RWO Spar Tangs
Stainless steel tangs for permanent anchorage of stays, shrouds, trapeze wire
attachments etc. All models are double straps welded together and formed to enclose
wire end.
RWO Spar Straps
Manufactured in polished stainless steel. The first 4 straps are universal and have a
multitude of uses. The legs can be reformed to fit most shapes of spars, whether if be
round or square. The R4750 is made of thicker and wider material.
R4620
R4650
RWO Spar Hardware
R4870 Vang fitting is robust, trouble free, and will take most standard keys.
R4863 Boom slide with generous, strong eye stainless steel to fit underside of most
popular booms for block or wire strap attachments. Complete with position fixing
screw.
RWO Goosenecks
R4653
R4340
For use on sailboats up to 6 metres (20ft). The compact, robust aluminum 12mm pin
and swivel are designed to keep the mast/boom distance to a minimum whilst allowing
200 degree rotation. The various strong stainless steel mounting brackets fit directly to
popular (50mm) mast sections but can be reformed to match others.
Part #
Description
Length
Aperture
Pin
Fastener
Spar Tangs
RWO R4620
For 5mm wire
25mm
7mm
5mm
6mm
RWO R4621
For 4mm wire
22mm
6mm
5mm
5mm
R4750
Spar Straps
RWO R4650
Boom Bail
75mm
75mm
-
5mm
RWO R4653
Mast/Boom
65mm
60mm
-
5mm
RWO R4654
Maststrap 45°
65mm
60mm
-
5mm
RWO R4750
H/D Boom Bail
78mm
40mm
-
5mm
RWO R4340
Mast Strap Tang
70mm
60mm
5mm
5mm
R4861
R4890
Hardware
RWO R4861
Vang Key Angled Pin
6mm
5mm
RWO R4890
Vang Key Angled Fabricated
5mm
-
RWO R4863
Slide For Boom Groove
5mm
-
RWO R5032
Gooseneck Body 57mm MAX (white)
-
-
Sailing
Boom End Gear
R4863
351
RWO
RWO Eyestraps
Electropolished pressed stainless steel for all standard eyestraps and forged rod for heavy duty.
NOTE: *Also available bulk, just add a T to the part # ie. R2820T.
Part #
Description
L mm
W mm
X mm
H (dia.) mm
D mm
Pack
RWO R2820
Deckclip
7
7
19
4
4
4
RWO R2830
Deckclip
10
11
25
5
8
4
RWO R2835
Deckclip
9
10
29
5
6
4
RWO R2841
Deckclip
19
16
38
5
11
2
RWO R2836
H.D. Deckclip
15
11
24
5
8
2
RWO R2828
Spar Clip
6
6
19
4
4
4
RWO R2838
Spar Clip
6
10
25-32
5
8
4
RWO R2848
Spar Clip
14
18
50-57
5
11
2
RWO R2811
Corner Clip
6
6
5
4
-
4
RWO R2812
Corner Clip
10
10
8
5
-
4
RWO R2813
Corner Clip
16
11
16
5
-
2
RWO R2851
Eyemount
9
-
19
4
5
4
RWO R2849
Eyemount
6
-
18
5
8
4
RWO R2850
Eyemount
11
-
28
5
8
4
RWO R2852
H.D. Eyemount
12
-
26
5
9
2
RWO R2861
Offset Clip
11
5
10
4
-
4
RWO R2862
Offset Clip
16
6
13
5
-
4
RWO R2863
Offset Clip
25
10
16
5
-
2
RWO Hooks
R2836
R2828
R2811
R2851
R2861
RWO Clip
Highly polished, stainless steel.
RWO R8430
RWO R8440
R2820
Electropolished stainless steel.
5mm opening
6mm opening
R2900
Part #
RWO R2452
Dia. mm
Length mm
Break Load Kg
5
33
350
R2907
R2903
RWO Hooks
Polished stainless steel or plastic construction.
S/S, 6mm opening (10 pkg)
Black nylon, 4 mm opening (4 pkg)
Unique nylon holders for stowing halyards & lines
RWO R2907
Rope Tidi, Black (2 pkg)
RWO R2908
Rope Tidi, White (2 pkg)
Sailing
RWO R2900
RWO R2903
352
RWO
RWO Rigging Links
RWO Clevis Pins
Electropolished stainless steel. Comes
complete with clevis pin & safety ring.
An economical solution for joining plates and assemblies together.
The length is from the underside of head to nearside of hole. All
manufactured from stainless steel. Sold in packs of 10.
*Also available bulk, just add a T to the part # ie. R6631T.
Pack
Pin
mm
Width
mm
Length
mm
Break Load
Kg
RWO R6230
4
5
10
13
770
RWO R6240
4
5
13
11
770
RWO R6330
2
5
10
25
907
RWO R6340
2
5
13
24
907
RWO R6350
2
5
16
22
907
RWO R6353
2
5
25
22
600
RWO R6380
Each
5
16
38
725
RWO R6390
Each
5
25
38
725
Part #
RWO Swivels
These plain bearing swivels are ideal for lighter
application and all are supplied complete with
clevis pin, rings and split pins.
Dia.
mm
Width
mm
Length
mm
Break Load Kg
RWO R6363
5
10
32
545
RWO R6364
5
6
28
800
Part #
RWO Safety Rings
Use when clevis pins are being constantly repositioned,
whereas a split pin should be used on more permanent
applications. Manufactured from stainless steel. Also
available bulk, just add a T to the part # ie. R6590T
Part #
Pack
Dia. mm
Clevis Dia.
RWO R6590
10
11
4+5
RWO R6600
10
14
5+6
RWO R6604
10
19
6+8
RWO R6607
10
23
8 + 12
Manufactured from stainless steel.
*Also available bulk, just add a T to the part # ie. R1811T
Sailing
Part #
Length
5
10
RWO R6631
5
13
RWO R6641
5
16
RWO R6651
5
19
RWO R6661
5
22
RWO R6731
5
30
RWO R6741
5
45
RWO R6671
6
12
RWO R6673
6
19
RWO R6681
6
27
RWO R6683
6
32
RWO R6709
8
32
RWO Rope Stoppers
A convenient way of tidying knots (which can be
hidden within the recess of the molding), also assist
in pulling the line, and the bright colours act as
identification. They can also be used as parrel beads
on standing wire rigging as sail protectors and port and starboard
identification.
*Two per package.
NOTE: Also available bulk, just add a T to the part # ie. R1901T.
Small 4mm
RWO Standup Springs
Part #
Dia. mm
RWO R6621
Pack
Description
Height
Dia.
RWO R1811
2
Blocks to 19mm
3/4”
23/32”
RWO R1812
2
Blocks to 25mm
1”
3/4”
RWO R1813
2
Blocks to 57mm
1-3/4”
1”
Medium 6mm
Large 8mm
Colour
RWO R1901
RWO R1991
RWO R1911
Black
RWO R1902
RWO R1992
RWO R1912
White
RWO R1903
RWO R1993
RWO R1913
Red
RWO R1904
RWO R1994
RWO R1914
Green
RWO R1905
RWO R1995
RWO R1915
Blue
RWO R1906
RWO R1996
RWO R1916
Orange
RWO R1907
RWO R1997
RWO R1917
Fl. Pink
RWO R1908
RWO R1998
RWO R1918
Yellow
RWO Nylon Hooks
Sold by the each.
RWO R8400T
RWO R8401T
4mm, White open
6mm, White open
RWO R8404T
RWO R8405T
RWO R8406T
RWO R8407
4mm, Black spring
6mm, Black spring
8mm, Black spring
10mm, Black spring, 2/pkg
RWO
353
RWO Burgees & Pennants
Lightweight burgees with nylon
bearing frame mounted on a fine
stainless pivot staff. Light, well
balanced and extremely sensitive with
pennants made in variety of bright
random colours from Rip-stop spinnaker nylon.
Height
mm
Arm
mm
Staff
mm
Mount
RWO R7494T
90
125
407
R7651
RWO R7495T
125
190
407
R7651
RWO R7496T
125
180
445
R7651
RWO R7630
165
210
-
-
RWO R7640
30
340
-
-
RWO R7641
5
125
-
-
Part #
Shape
Parts:
RWO R7651
RWO R7640
RWO R7641
RWO R7630
Pennant Mastclip
Shroud Tell-Tales Supplied in pairs red and green with velcro shroud fixing.
Sail-Tell-Tales Secured to the sail by self-
adhesive discs. These tell tales accurately indicate airflow over the sails and improves trim, pack of 6.
Protest Flag Code Flag B in bright red nylon with convenient velcro fastening.
RWO TYGA Ties
Versatile general purpose cleats designed
specifically for use with shockcord, giving
single handed adjustment. Manufactured from
lightweight red plastic, these fittings have
unlimited uses.
RWO R8030
10mm, 2/pkg
RWO Sail Stickers
Self adhesive and colourful PVC sticker cards
with waterproof self adhesive back.
International codes 170 x 100mm with I.D. &
meaning
RWO R7340
Adjuster strip, Small 130 x 8mm (10mm
calibrated scale)
RWO R7350
RWO R7351
Please ask for a RWO Catalogue for a full listing of products
Sailing
Adjuster strip, Large 270 x 20mm (25mm
calibrated scale)
354
Selden / Boomkicker / Spartite
Selden
Seldén carbon spars are manufactured
on a state-of-the-art CNC filament
winding machine offering the best low
weight, engineered carbon spars.
The Seldén spar range is internationally known as the leading
dinghy performance spar product, winning more World titles than
any other manufacturer over the last 30 years.
Working hand-in-hand with the worlds top sailors, carefully
analysing their input and feedback, enables Seldén to produce
the ultimate dinghy rig for every boat. Innovative design, attention
to detail, advanced testing and manufacturing, combined with an
open ear towards the dinghy sailing community, have won Seldén
the trust of all dinghy sailors the world over
Tapered spinnaker poles are offered in
both 38mm and 42mm centre diameter,
tapering down to 25mm at each end.
This gives maximum stiffness in the
area of maximum load, yet keeps the
pole down to minimum weight.
Custom Poles & Masts Available by Special Order
Boomkicker
Boomkicker Boom Supports
by Seoladair
Boomkickers are the simple, affordable solution to supporting the boom and eliminating the chafe,
hang-ups and adjustments of a topping lift. Boat performance is improved with less
weight and windage aloft. In light air, lifting the boom opens the leech for a faster sail
shape and more speed. Reefing is safer and easier with better boom control. The simple
design eliminates friction and sliding parts. Flexing spring provides fast response and a near
constant force for higher vang efficiency. Mast fitting slides in the luff groove to eliminate
drilling in the mast. Easy installation independent of the vang with no need to replace existing
hardware. Fittings, fasteners, drill and tap included for a complete package.
Suggested
Boat Size
Initial
Pin to Pin
Minimum
Pin to Pin
Maximum
Force 1
SEO K0750
19 - 25’
36”
26”
250 lbs
11” - 6”
SEO K0800
25 - 27’
45”
35”
300 lbs
15” - 6”
SEO K1000
25 - 30’
45”
35”
400 lbs
15” - 6”
SOE K1250
30 - 34’
53”
43”
500 lbs
16” - 9”
SEO K1500
30 - 38’
53”
43”
600 lbs
16” - 9”
Part #
Stroke
Initial 2 Min. 3
1. At Maximum pin to pin length
2. Maximum stroke at initial pin to pin
3. Maximum stroke at min. pin to pin. Stroke is travel when flexed. 1” of stroke
equates to approximately 7” at the aft end of the boom.
Spartite
Sailing
Kit Includes:
The solution to securing &
sealing masts at deck level
Spartite Mast Wedge Replacement System
Pre-measured Spartite cans
Modelling clay
Foam support strips
Pouring cup
Stirring sticks
Plastic gloves
Petroleum Jelly
The Spartite ring shrinks less than one thousandths of an inch, and when installed properly will radically
reduce or eliminate leaking at the partners. Spartite ensures secure and correct mast position in the
partners all season and makes correct placement of the mast in the partners automatic whenever the mast is re-stepped. This is an
exceptional feature for racers who trailer to regattas, sailors who remove their spars annually, and boats with unique rig placements.
Spartite is a pre-measured two part polymer poured into the cavity between the mast and the partners while the mast is in the boat. Each
kit comes with complete instructions and materials for the yard or yacht owner to build a simple mold out of even the most complex
partners or mast collar. Spartite makes a one piece perfect fitting mast chock that replaces archaic wedges.
SPA 2000-KIT1
SPA 2000-KIT2
51 cu. in.(836 cu cm)
102 cu. in (1672 cu cm)
Safety Lines
Knee Pads
Foil & Wing PFDs
Deckvest Lite
Deckvest 5D
Spinlock
it’s your life on the line
356
Spinlock Deckware
▪▪Designed to be fully integrated into the lifejacket system
▪▪The most compact AIS Unit on the market – upto 30% smaller
▪▪AIS unit deploys automatically on lifejacket inflation
▪▪Transmit an alert to all AIS receivers and AIS enabled plotters
in the vicinity.
▪▪An additional feature of the MOB1, is its ability to activate the
DSC alarm on your vessels VHF
▪▪Integrated strobe light for maximum visibility
▪▪7 year battery life
▪▪24+ hours operational life
▪▪134 x 38 mm
▪▪92 grams
▪▪5 year warranty
W
E
Spinlock RescueME MOB1 Features:
N
Communication and Safety at Sea
AIS
Integrated DSC transmitter
30% smaller (typically)
Automatic activation
Simple lifejacket integration
7 year battery life
24+ hours operational life
5 year warranty
66 channel GPS
Integrated strobe light
Life jacket mount
Once activated the MOB1 will transmit an alert to all
AIS receivers and AIS enabled plotters in the vicinity.
The integrated GPS ensures precise location is sent to
the vessel and any others that may be assisting.
AIS transmission Transmit Power (EIRP): 1Watt
Frequency: 161.975/162.025MHz
DSC Transmission Transmit Power (EIRP): 1Watt
Frequency: 156.025MHz
E
N
Spinlock Deckvest Lite
Sailing
Now Available
▪▪170N Buoyancy
▪▪Ultra light weight, low profile design
▪▪Straps with soft rear moulding reduce twisting and aid adjustment
▪▪Single crotch strap with recessed clip reduces risk of snagging
▪▪Clipping area for PLB/VHF
▪▪Attachment for kill cord or VHF leash
▪▪Recessed belt clip and webbing end tidy
▪▪One size fits all
▪▪Attachment for Pylon Lite
▪▪Water sensitive activation system
▪▪Uses a compressed paper capsule
▪▪5 year warranty including Through Life Support (TLS)
SPI DW-LTE/A
SPI DW-LTE/AGP
SPI DW-LTE/APB
SPI DW-LTE/ASY
SPI DW-LTE/ATW
Gun Metal
Grenadine Pink
Pacific Blue
Sumba Yellow
Tropic Water
SPI DW-LTE/A-PM
SPI DW-LTE/AGP-PM
SPI DW-LTE/APB-PM
SPI DW-LTE/ASY-PM
SPI DW-LTE/ATW-PM
RescueME, Gun Metal
RescueME, Grenadine Pink
RescueME, Pacific Blue
RescueME, Sumba Yellow
RescueME, Tropic Water
Parts:
SPI DW-RAK
SPI DW-CYD33
Re-arming kit
Cylinder only, 33g
with
RescueME
MOB1
Pacific Blue
Sumba Yellow
Tropic Water
Grenadine Pink
Approvals: ISO 12402-3
CE approved
USCG approved
Gun Metal
W
Ultra lightweight, low profile lifejacket for sail and power
357
Spinlock Deckware
N
W
E
5D 170N Series Inflatable/Harness Deckvests
Now Available
Common Features:
▪▪Unique ‘Shoulder Fit System’ flexes & locates ensuring correct fit on
shoulders every time
▪▪New back adjustment - hidden and non snag for easy simple adjustment
▪▪High Spec Auto Inflating 170N Lifejacket, fitted with sprayhood
▪▪Pylon Light - High intensity, water activated flashing LED Light
▪▪23cm flexible antenna wand gives improved visibilty above head & water
▪▪Soft loop safety line attachment
▪▪Mesh pocket for VHF/PLB Locator
▪▪Double Crotch Straps / Thigh straps with recessed clips
▪▪Quick Access Emergency safety line cutter
▪▪‘Manual Only’ firing head available (DW-MAK)
▪▪Warranty: 5 years from date of first registration
with
RescueME
MOB1
Black
Spinlock Deckvest 5D 170N Pro Sensor
▪▪Water sensitive activation system
▪▪Uses a compressed paper capsule that dissolves and releases a
spring to puncture the gas cylinder. (Pro Sensor has indictators to
show status of cap and cylinder)
▪▪The cap is designed so that only water flowing upwards through
the unit will cause it to activate. Water, spray and rain running
down jacket will not cause activation
SPI DW-LJH5D/A1
SPI DW-LJH5D/A2
SPI DW-LJH5D/A3
Chest: 23 - 35.5", Black
Chest: 29 - 48", Black
Chest: 38 - 59", Black
SPI DW-LJH5D/A1-PM
SPI DW-LJH5D/A2-PM
SPI DW-LJH5D/A3-PM
RescueME, Chest: 23 - 35.5”, Black
RescueME, Chest: 29 - 48”, Black
RescueME, Chest: 38 - 59”, Black
SPI DW-LJH5D/A1PB
SPI DW-LJH5D/A2PB
SPI DW-LJH5D/A3PB
Chest: 23 - 35.5", Pacific Blue
Chest: 29 - 48", Pacific Blue
Chest: 38 - 59", Pacific Blue
SPI DW-LJH5D/A1TW
SPI DW-LJH5D/A2TW
SPI DW-LJH5D/A3TW
Chest: 23 - 35.5", Tropic White
Chest: 29 - 48", Tropic White
Chest: 38 - 59", Tropic White
SPI DW-MAK
SPI DW-RAK
SPI DW-CYD33
Manual conversion kit
Re-arming kit
Cylinder only, 33g
Parts:
Pacific Blue
Tropic White
Crotch and thigh
straps included.
Spinlock Deckvest 5D 170N Hammar
SPI DW-LJH5D/H1
SPI DW-LJH5D/H2
SPI DW-LJH5D/H3
Sailing
▪▪Designed for the Performance/Pro sailor for use in very adverse
and extreme conditions; will not accidentally inflate
▪▪The Hammar system is activated by water pressure and will not
inflate until the cap is approximately 10cm underwater
▪▪Water, spray and rain running down the vest will not cause
activation
▪▪Visible indicators to show the armed status of the cylinder and
the firing cap
▪▪Single indicator clearly shows if unit is armed
Chest: 23 - 35.5", Black
Chest: 29 - 48", Black
Chest: 38 - 59”, Black
SPI DW-LJH5D/H1-PM
RescueME, Chest: 23 - 35.5”, Black
SPI DW-LJH5D/H2-PMRescueME, Chest: 29 - 48”, Black
SPI DW-LJH5D/H3-PMRescueME, Chest: 38 - 59”, Black
Parts:
SPI DW-MAK
SPI DW-CYD33
SPI DW-RAH/150
Manual conversion kit
Cylinder only, 33g
Re-arming kit
CE Approved ISO12402-3 Lifejacket
ISO12401 Deck Harness
358
Spinlock Deckware
N
Spinlock Cento
E
W
▪▪Junior 150N catagory Lifejacket Harness
(100N actual)
▪▪Compact and lightweight, with body form
fitting
▪▪20-50 kgs person weight (Recommended for
juniors from 8 to 16 years old)
▪▪Soft loop harness attachment point
▪▪Lightweight, easy adjust belt
▪▪Single crotch straps
▪▪Automatic inflation
▪▪Attachment for Pylon light and sprayhood
▪▪5 year warranty
Spinlock ZERO
High Agility Flotation Vests
▪▪Designed for the performance boater
▪▪Low bulk, supple construction
▪▪High stretch two-part dynamic
construction for fast, unrestricted
movement
▪▪Integrated venting assists the technical
breathable clothing systems
▪▪Fast body-fit waist adjusters
▪▪Slimmed foam panel profiling
▪▪Quick draining to reduce wet loading
▪▪Hand warmer pockets
▪▪Easy-access essentials pocket
SPI DW-CEN/APB Pacific Blue
SPI DW-CEN/AGP Grenadine Pink
SPI DW-BAM/F1
SPI DW-BAM/F2
SPI DW-BAM/F3
SPI DW-BAM/F4
Accessories:
SPI DW-RAK/100 Cylinder-auto head jr
SPI DW-SHD/100Sprayhood
Front
Chest: 30 - 35” (size 1)
Chest: 35 - 40” (size 2)
Chest: 40 - 44” (size 3)
Chest: 44 - 53” (size 4)
Back
Approvals: ISO 12402-3
ISO 12401 harness
CE approved
Spinlock Foil / Wing
Sailing
SPI DW-BA/S1CB
SPI DW-BA/S2CB
SPI DW-BA/S3CB
SPI DW-BA/S4CB
Size 1, Blue
Size 2, Blue
Size 3, Blue
Size 4, Blue
Spinlock Wing
SPI DW-BA/S1MR
SPI DW-BA/S2MR
SPI DW-BA/S3MR
SPI DW-BA/S4MR
Size 1, Red
Size 2, Red
Size 3, Red
Size 4, Red
ISO 12402-5
CE approved
Buoyancy Aid
W
Spinlock Wing
Pocket
E
Size 1, Black Graphite
Size 2, Black Graphite
Size 3, Black Graphite
Size 4, Black Graphite
Internal Belt
Zero Size Guide
APPROVALS
CE approved ISO 12402-5
1
2
3
4
80 cm
31.5”
Spinlock Foil
SPI DW-BA/F1BG
SPI DW-BA/F2BG
SPI DW-BA/F3BG
SPI DW-BA/F4BG
N
▪▪Ideal for dinghies, keelboards, RIB’s and watersports
▪▪Foil is a front zip and the wing a side zip style
▪▪Low profile with low snag body fit system
▪▪Tapered high cut for action and mobility
▪▪Internal “GRIP” print
▪▪Stretch outer pocket with internal security pocket
▪▪Dry coated elastic side panels
▪▪Pen pocket
▪▪Articulated back panelling (FOIL)
▪▪5 year warranty
Hand warmer
Pocket
90 cm
35.5”
100 cm
39.4”
110 cm
43.5”
120 cm
47.3”
130 cm
51.2”
Chest Measurement
Spinlock LED Pylon Light
Fits most brands of inflatable vests.
Emergency beacon for improved visability
in the water
▪▪23 cm flexible antenna raises LED light
above head and water
▪▪Removes 57° head shadow giving a 14%
increase in visible light
▪▪Fully sealed LED with a minimum 0.75
Candela for 8+ hours
▪▪Water activation, plus on/off switch
▪▪Can be retro fitted to any inflatable
lifejacket with adjusting strap
▪▪Battery life indicator confirms 8 hours or more
duration
▪▪Compact low profile sealed lithium battery
▪▪Fitted as standard on Deckvest 5D lifejackets
▪▪5 year self life
SPI DW-PY/L1
Approvals: SOLAS, USCG, MED,
CDN COASTGUARD AUTHORITY
140 cm
55.2”
359
Spinlock Deckware
Lifejacket Comparison Chart
FOIL & WING
ZERO
DECKVEST
LITE
DECKVEST 5D
DECKVEST 5D
DECKVEST 5D
PRO SENSOR
170N
HAMMAR
170N
PRO SENSOR
275N
CENTO
SOLAS
Junior Sailors
20-50 kgs
Superyachts,
commercial marine
& working near
water
Dinghies, keelboats,
rib’s & watersports
Performance
keelboat, sports
boat & class
racing sailors
Designed for fastcraft,
all sail & power boats.
Ideal for inshore &
coastal waters
For all sailors who
require a lifejacket with
deck harness
Sailors or those working
in very wet conditions
& extended offshore
sailing
Commercial & marine
professionals
50N Buoyancy


-
-
-
-
-
-
100N Buoyancy
-
-
-
-
-
-

-
170N Buoyancy
-
-



-
-
-
275N Buoyancy
-
-
-
-
-

-
 ( Twin)
UML Pro Sensor Inflator
-
-
-

-

-
-
Hammar Hydrostatic Inflator
-
-
-
-

-
-
-
UML Mk5 Inflator
-
-

-
-
-

-
Shoulder Fit System™
-
-
-



-
-
Back Adjustment
-
-





-
Simple Chest Adjustment
-
-






Recommended For:


-
-
-
-
-
-
S - XL
1-4
One size
1-3
1-3
1-3
One size
One size
Harness
-
-
-





Sprayhood
-
-
Optional accessory



Optional accessory
Optional accessory
Pylon™ Light
-
-
Optional accessory



Optional accessory
Optional accessory
Mesh Pocket for PRB/VHF
-
-
-



-
-
Clipping Area for Kill Cord/VHF
-
-

-
-
-

-
Crotch/ Thigh Straps
-
-






Safety Line Cutter
-
-
-



-
-
5 Year Warranty

2 year






Through Life Support

-






Body Fit System
Sizes
Deckvest Size Guide
Cento
Wing & Foil Size Guide
Lite
XS
S
1
L
2
3
XL
70 cm
27.5”
80 cm
31.5”
90 cm
35.5”
100 cm
39.4”
110 cm
43.5”
120 cm
47.3”
Chest Measurement
130 cm
51.2”
140 cm
55.2”
50 cm
20”
70 cm
27.5”
90 cm
35.5”
110 cm
43.5”
Chest Measurement
130 cm
51”
150 cm
59”
Sailing
Deckvest 5D
M
360
Spinlock Deckware
Spinlock Deck Pro Harness
Spinlock Performance Safety Lines
▪▪Super light, comfortable and easy to fit
▪▪Wearable with Mast Pro harness
▪▪Instantly fitted unique front opening belt
system fits fast and securely first time, using
‘2T’ fastener
▪▪Quick adjust ‘Doubleback’ buckles in
stainless steel
▪▪Shoulder straps are shaped towards the centre of the chest, for
exceptional comfort and freedom of movement
▪▪Lightweight tether attachment loop
▪▪Knife pouch accessory
▪▪Lighter more compact safety lines for
performance sailing
▪▪Ultra compact line version
▪▪Unique FEA-lightened clip; easy action, full
strength
▪▪Lightweight looped cow hitch attachment with clip(s) or
clip/clip(s) options
▪▪Full strength compact 16mm line 28% lighter than the
25mm standard
▪▪Dry-Coated to prevent water absorption and weight gain
▪▪Overload indicator displays when the load has exceeded
500kgs to show the line needs replacing
SPI DW-DPH Chest: 37.5" - 46.5"
Spinlock Mast Pro Harness
▪▪Secure alternative to a bosun’s chair
▪▪Quick adjust ‘doubleback’ buckles in marine
grade stainless steel
▪▪Extra tough IBQ Cordura leg strap covers
▪▪Ergonomic sculptured waist belt and wide leg
straps for added comfort & lumbar support
▪▪Neoprene buckle covers to prevent snagging
▪▪Replaceable elastic components
▪▪Tripping spike pocket
▪▪Tool attachment points
SPI DW-MPH
Waist: 24" - 40", Leg: 18" - 25"
Spinlock Wrist Support
A high strength elastic wrist wrap
designed to provide custom support and
aid central and lateral wrist stabilization
for long periods of time helming and
grinding.
SPI DW-WSP
Universal, pair
Spinlock Knee Pads
▪▪High density moulded foam provides patella
support and protection
▪▪Extra tough IBQ Cordura fabric protection
▪▪Breathable stretch panelling for added comfort
▪▪Ergonomically shaped to maintain position
and prevent slipping
▪▪Low volume back panelling prevents bulking
Sailing
SPI DW-KPD
SPI DW-KPD/L
Small/Medium, pair
Medium/Large, pair
▪▪Single clip, 2m, 208gr
SPI DW-STR/2L
▪▪Single clip, elasticated 2m, 210gr
SPI DW-STR/2LE
▪▪Double clip, 1 x elasticated 2m, 1
x non-stretch 1m, 370gr
SPI DW-STR/3L
▪▪Double clip, 2m
SPI DW-STR/02
▪▪Double clip, elasticated 2m
SPI DW-STR/02E
▪▪Triple clip, 1 x elasticated
2m, 2 x non-stretch 1m
SPI DW-STR/03
By wearing the easily stowed (optional) safety line ‘cutter’,
any safety line will satisfy ISAF and ORC recommendations
by providing a means of disconnection under load.
Spinlock Cutter & Pouch
▪▪'S-Cutter’ is made for severing safety lines
under load by providing a reliable ‘means of
disconnection’
▪▪Anyone wearing the Cutter satisfies ISAF
and ORC recommendations, whatever type
of safety line and whatever the type of clip used
With a guarded razor edge and stowed either in the special
pocket on the Deckvest or in a simple pouch worn on the life
jacket harness.
SPI DW-CTR
Spinlock Deckware
▪▪Smallest pack in the range, suitable
for personal essentials
▪▪Lightly padded with structured two
way zip for easy access
▪▪Self draining
▪▪Lanyard attachment and key clip for
security
▪▪Fits to any belt with secure double fold velcro attachment
▪▪Fits to 2014 Deckvest with toggle attachment point
▪▪H: 160 x D: 60 x W: 160mm
W
E
SPI DW-PCS
Spinlock Chest Pack
N
W
E
▪▪Lightly padded with structured
two way zip for easy access
▪▪Self draining
▪▪Secure water bottle holder and
380ml water bottle included
▪▪Lanyard attachment and key clip for security
▪▪Fits to any belt with secure double fold velcro attachment
▪▪Taped with a reflective strip
▪▪H: 180 x D: 80 x W: 220mm
N
Spinlock Side Pack
361
SPI DW-PCC
W
E
▪▪Lightly padded with structured two
way zip for easy access
▪▪Self draining
▪▪Clear panel window
▪▪Lanyard attachment and key clip for
security
▪▪Fits to any belt with secure double fold velcro attachment
▪▪H: 80 x D: 60 x W: 200mm
N
Spinlock Belt Pack
SPI DW-PCB
Sailing
XTR Powerclutch
9
363
Spinlock
Spinlock Powerclutch XCS & XTS
Use XTS on yachts that require a higher safe working load and a more advanced
release mechanism than the XAS.
XCS Aluminum sides for sustained high load operation. Comes in black or white.
▪▪Alloy handle lever with soft end grip
▪▪Secure handle lock in open or close position
Part #
Style
Line dia
XTS Series
Max SWL
Fasteners
XCS Series
XTS Series
SPI XTS0610/1
Single
610mm (1/4”-3/8”)
700kg (1,543 lbs)
2 x 5/16” MF
SPI XTS0610/2
Double
610mm (1/4”-3/8”)
700kg (1,543 lbs)
4 x 5/16” MF
SPI XTS0610/3
Triple
610mm (1/4”-3/8”)
700kg (1,543 lbs)
6 x 5/16” MF
SPI XTS0814/1
Single
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
2 x 5/16” MF
SPI XTS0814/2
Double
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
4 x 5/16” MF
SPI XTS0814/3
Triple
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
6 x 5/16” MF
SPI XTS0814/4
Quad
8-14mm (5/16”-9/16”)
1000kg (2,200 lbs)
8 x 5/16” MF
SPI XTS0814/HP
XTS0814 Horizontal clutch, port
SPI XTS0814/HS
XTS0814 Horizontal clutch, starboard
Part #
Style
Line dia
Max SWL
Fasteners
1200kg (2,640 lbs)
2 x 5/16” MF
XCS Series
SPI XCS0814/1B
Single
8-14mm (5/16”-5/8”)
Parts:
SPI CAM0610
SPI CAM0814
SPI X-HDL
6-10mm Cam module upgrade
8-14mm Cam module upgrade
Aluminum handle
Spinlock Powerclutch XX
▪▪Reactor Cam Module - linked base and cam
react together in one self contained module
▪▪With ‘reactie clutching’ the holding is
consistent across the full diameter range release is smooth and progressive
▪▪Offers signifiant rope holding improvement on
the latest small diameter rope types
▪▪Optimised or 10mm line
▪▪Ultra lightweight alloy/composite body
▪▪Handle moves freely to ergonomic position, eady for release
▪▪Reactor cam module is easily removed for on-deck cleaning and
servicing
▪▪Fastener locator allows one person installation
▪▪Idential foot print to XTS/XCS up to /3’s
▪▪L: 14.6 x H: 8.4 x W: 3.3 cm
XX holds loads 50% higher than any conventional clutch and yet it is
smooth and controlled to release. It is the only secure clutch solution
for genoa halyards on inshore racing yachts from 35-50 foot and
for secondary applications on larger yachts. XX has been optimized
especially for high performance 8-12mm (5/16 - 1/2”) diameters.
▪▪Special 3D wedge action helps contain full load with minimal
rope wear
▪▪Peek roller bearings give safe and controlled release
▪▪Monocoque alloy box section for absolute overload security
▪▪Heavy duty low level stainless steel fairleads
▪▪Easy access for removing complete internal assembly, even when
banked
▪▪High tensile fasteners supplied
▪▪L: 19.5 x H: 9.6 x W: 4.2 cm
▪▪Max SWL: 1800kg (3,900 lbs)
SPI XTR0812/BBlack
SPI XTR0812/WWhite
SPI XTR0812/SSilver
SPI XX0812Single
- Custom Colours Available -
Parts:
SPI XX-JAW
SPI XX-KIT
Jaw/roller set for XX0812
Upgrade kit
Spinlock Rope Clutch XA/1 Parts
SPI SA16Handle
SPI XA-SIDE
Side mount fairing kit
Sailing
Spinlock XTR Reactor Clutch 8-12mm Lines
364
Spinlock
Spinlock Mini Jammer SUA
Popular halyard jammer for use with small winches. More power than a cam
cleat but much smaller than a powerclutch.
▪▪Polished stainless steel reinforced body
▪▪Low, rounded profile
▪▪No accidental release
▪▪Manual lock down
▪▪Does not replace clutch
Part #
Style
Line dia
Max SWL
L x H x W mm
Fasteners
SPI SUA/1
Single
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 51
4 x #6
SPI SUA/2
Double
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 69
4 x #6
SPI SUA/3
Triple
6-10mm (1/4”-3/8”)
400kg (880 lbs)
57 x 46 x 86
4 x #6
Spinlock Powerclutch XAS
▪▪Toughened impact resistance
▪▪Modular build: easiest to upgrade & maintain
▪▪Extra clutching and holding power on small diameter lines
▪▪Alloy centre plates share high loads on multiple units
Style
Line dia
Max SWL
Fasteners
SPI XAS0408/1
Part #
Single
4-8mm (3/16”-5/16”)
450kg (990 lbs)
2 x #6
SPI XAS0408/2
Double
4-8mm (3/16”-5/16”)
450kg (990 lbs)
4 x #6
SPI XAS0408/3
Triple
4-8mm (3/16”-5/16”)
450kg (990 lbs)
6 x #6
SPI XAS0612/1
Single
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
2 x #6
SPI XAS0612/HP
Single
Pre-assembled with fairing kit for port side
SPI XAS0612/HS
Single
Pre-assembled with fairing kit for starboard side
SPI XAS0612/2
Double
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
4 x #6
SPI XAS0612/3
Triple
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
6 x #6
SPI XAS0612/4
Quad
6-12mm (1/4”-1/2”)
575kg (1,265 lbs)
8 x #6
Replacement Parts:
SPI CAMXASCam
SPI SA29
Spring arm
SPI XAS-BASE-0408
Base upgrade
SPI XAS-BASE-0612
Base upgrade
SPI XAS-HDLHandle
SPI X-SIDE
Side fairings (pair)
SPI XAS-SIDE
Side fairings (pair)
SPI XAS-SMNT
Side fairing kit
SPI XAS-TAG
Coloured handle inserts (4)
SPI XLBL
Handle label kit
Sailing
Spinlock Winch Release Jammer
A radical departure in design from the traditional clutch or jammer aimed squarely
at builders of production yachts in the fast growing 38’-50’ sailboat range. The ZR
Jammer promotes safer handling of highly loaded lines through a new and simple control
mechanism, virtually eliminating the risk of crew injury from accidental release. Instead of
a lifting lever its innovative GRIP Switch selects ‘ON’ mode (one-way jamming action) or
‘OFF’ mode (primed for winch release)
▪▪Hold loads up to 1500 kgs (50% more than an XTS)
▪▪Use on the latest high tech lines (10-14mm)
▪▪Weighs 25% less than a typical 800 kg SWL rope clutch
▪▪Controlled release action
▪▪Easy access fastener holes
SPI ZR1014
365
Spinlock
Spinlock PXR Cam Cleats
Wide operating arc
The three-stage release spring can be pre-set for the prevailing
conditions and application. Select lighter settings for continuously
trimmed sheets, traveller controls, vangs and similar controls.
Harder settings for halyards and occasionally adjusted lines. While
sailing, the roller action of the PXR keeps the release effort easy,
even as the wind strength increases. The low profile body of the
PXR contains hard anodized CAM and base surfaces for maximum
grip and durability, whilst stainless steel rope guides provide a wide
angle of control, with easy release from any angle.
SPI PXR0206
SPI PXR0810
Roller action maintains
easy release as wind
load increases
Three stage adjustment
2 - 6 mm
8 - 10 mm
PXR0206
T-series versions use the same (27 & 38 mm) hole
centres as traditional camcleats, allowing direct
retrofit anywhere without drilling. This makes the
PXR T-Series ideal for main sheet swivel systems on
yachts and keelboats, as well as downhaul, vang and
backstay applications.
SPI PXR0206/T
SPI PXR0810/T
2 - 6 mm
8 - 10 mm
SW-series 2-6 mm size is the preferred swivel
mount choice of dinghy manufacturers for single
line spinnaker hoists and single cleat control of jib
sheets and vangs, whilst the 8-10mm size improves
handling on big boat vang and downhaul controls.
SPI PXR0206/SW
SPI PXR0810/SW
2 - 6 mm
8 - 10 mm
VP-series allows single line control to either side of
the boat from its central mast or boom installation.
Ideal for mast base mount for catamaran downhauls.
SPI PXR0206/VP
T Series
SW Series
2 - 6 mm
0206 Series SWL: 140kg, Break Load: 280kg
0810 Series SWL: 200kg, Break Load: 400kg
Sailing
VP Series
366
Spinlock
Spinlock Spinnaker Blocks
This mobile jammer block is for situations where a fixed deck block can’t help: peeling
spinnakers, or changing a sheet on a winch. Because it has its own webbing strop, it takes up no
deck space and can be repositioned on the toe rail or onto a pad eye.
▪▪Complete with Spectra webbing strop to secure the block to toe-rail or pad-eye
▪▪Strop allows full rotation for spinnaker sheet use or allows it to lie flat on deck
▪▪Integral shock cord holds the block off the deck
▪▪Proven cam profile, holds loads up to 20% of the block’s SWL
▪▪Plain bearing sheave for smooth running at low loads, yet efficient performance at high loads
▪▪No holes in the deck
Part #
SWL
(Sheave)
Safe Cam
Load
50mm
800kg
160kg
63mm
1200kg
240kg
Max. Line
Sheave
SPI BRS/50
6-10mm
SPI BRS/63
8-12mm
The BRS cam action is preset with three useful features:
Lock-back, the cam stays clear of the sheet when it is not needed : no accidental jamming.
Auto release, the locked cam springs clear of the line for free runout after the sheet is re-tensioned.
Friction phase, even if the sheet goes slack or is out of use when the cam is engaged, the cam stays
engaged. No more sheets in the water!
Spinlock Sheave Deck Organizers
New slimline range for leading lines to the clutch. Good clutches work best with good
organizers. The T-Series organizers lead multiple lines back from the mast to XAS or XTS
powerclutches. By using efficient bearings and minimizing their overall length, unnecessary
friction has been designed out. This all helps reduce winch effort and increase halyard life. All
organizer models are designed to be double stacked with other sizes of the same hole centres.
Sheave dia.
Max SWL
Total SWL
Line Dia
L x W x H mm
Fasteners
SPI T38/2
Part #
38mm
660kg (1,452 lbs)
600kg (1,320 lbs)
12mm
148 x 38 x 26
#6
SPI T38/3
38mm
660kg (1,452 lbs)
900kg (1,980 lbs)
12mm
191 x 38 x 26
#6
SPI T38/4
38mm
660kg (1,452 lbs)
1200kg (2,640 lbs)
12mm
234 x 38 x 26
#6
SPI T38/5
38mm
660kg (1,452 lbs)
1600kg (3,520 lbs)
12mm
277 x 38 x 26
#6
SPI T50/2
50mm
1000kg (2,200 lbs)
1000kg (2,200 lbs)
14mm
196 x 50 x 29
#8
SPI T50/3
50mm
1000kg (2,200 lbs)
1500kg (3,300 lbs)
14mm
252 x 50 x 29
#8
SPI T50/4
50mm
1000kg (2,200 lbs)
2000kg (4,400 lbs)
14mm
308 x 50 x 29
#8
SPI T50/5
50mm
1000kg (2,200 lbs)
2500kg (5,500 lbs)
14mm
364 x 50 x 29
#8
Replacement Parts:
Alloy sheave, 38mm
Acetal composite sheave, 38mm
Alloy sheave, 50mm
Acetal composite sheave, 50mm
Sailing
SPI T38A
SPI T38C
SPI T50A
SPI T50C
Spinlock Micro Organizers
Spinlock Bullseyes
▪▪Versatile new solution for low loaded lines, either fitted alone or
double stacking onto new T25 organisers
▪▪Successful BE stainless eye construction
▪▪Grouped format minimises the deck space for multiple lines
▪▪Shape deflects easily to fit concave or convex surfaces
▪▪Base detailed for self-sealing gasket or wet silicone deck sealing
▪▪BE10/2’s and 3’s stack anywhere on the T25 organiser providing
a very neat new rope management solution
SPI BE10/2Double
SPI BE10/3Triple
▪▪Micro-sized for lightest weight and least deck footprint on small
boats up to 28’ using lines up to 10mm
▪▪Composite mouldings - halving the number of diferent parts
required to produce all multiple from 2 to 6 x 25mm sheaves
▪▪Stainless steel details add local
stiffnes and prevents line abrasion
▪▪Sheave Diameter: 25 mm
▪▪SWL per sheave 400kg
SPI T25/2
SPI T25/3
SPI T25/4
SPI T25/5
SPI T25/6
2 Sheave
3 Sheave
4 Sheave
5 Sheave
6 Sheave
Spinlock
367
Spinlock Flush Mount Throttle Control Adapter
The ATCU/1 Faceplate is designed to fit with Teleflex model B700,
CH2100P and CH2600P. Using ATCU under power is exactly like
using a normal throttle lever-except you can remove the handle
at any time. Run the engine in neutral
simply by pushing the handle inwardswhich disengages the clutch. Return the
handle to the minimum throttle position,
and it smoothly re-engages.
SPI ATCU/1
SPI ATCU/1+
SPI ATCU-LVR
Face plate
Face plate & lever
Lever only
Spinlock Furling Line Leads
Stanchion-mounted furling line fairlead.
▪▪Safe, low-profile design
▪▪Cuts furling line friction
▪▪Fairlead model WL/1 straight line guide for other stanchions
▪▪Sheave model WL/2 for line entry and exit
▪▪Unique tracker-ball angle adjuster for perfect sheave alignment
▪▪Complete with fasteners, easy to fit
▪▪Fits 1” stanchions only
SPI WL/1Bullseye
SPI WL/2Sheave
Parts:
SPI WL-SHEAVE
Replacement for WL/2
Max. Rope
Height
Width
SPI BE06
6mm (1/4”)
22.5
23.6
#8
SPI BE10
10mm (3/8”)
27.5
33.3
#10
SPI BE12**
SPI BE16**
Fasteners
Twin fixing
12mm (1/2”)
SPI BE12/TF
33.5
39.5
1 litre
250ml, brush & gloves
Spinlock Winchfeeder
Ideal for keeping long control lines tidy and clear of
possible snags. Strongly recommended for coach roof
or foredeck applications where line runs between two
fixed points with little deflection needed.
▪▪Self aligning until fastened, single or twin screw fixing
▪▪Stainless steel insert
SPI BE10/TF
RP25 is a new brush-on surface coating
that protects critical parts of any flexible
fibre material from abrasion and UV
damage. RP25 impregnates the cover and
core to give significant gains in working
life and grip, without reducing the
flexibility of the rope. Coating a line with
RP25 also increases grip and ultimate load
holding in any clutch or jammer, for any size of rope, and without
increasing its diameter.
SPI RP25/L
SPI RP25/R
Spinlock Bullseye Guides
Part #
Spinlock Rope Protection
If cross winching is a better option, a line from a clutch on one
side can be led quickly and efficiently to a winch on the opposite
side via the winchfeeder sheave. Their very low 25mm (1”) profile
keeps winchfeeders safely out of the traffic.
▪▪Divert a line to an alternative winch
▪▪Fit retaining clip TWF-RET to keep lines safely
in place
SPI TWF/50M
SPI TWF/63M
50mm, SWL 800 kg
63mm, SWL 1000 kg
1/4”
Twin fixing
16mm (3/4”)
SPI BE16/TF
43.4
50.9
5/16”
Twin fixing
**Limited Quantities
Headsail feeder guides any flaked genoa from the deck cleanly
up into the foil. Supplied with a length of line for attachment in a
correct, free pivoting position between luff entry and deck.
▪▪Headsail feeder RF/H guides any flaked genoa from
the deck cleanly up into the foil
▪▪Both headsail feeders are supplied with a length
of line for attachment in their correct free pivoting
position between luff entry and deck
▪▪Luff tape protection feature
▪▪Forged 316 stainless steel body
▪▪Graphite loaded, anodised alloy rollers
SPI RF/H Headsail
SPI RF/MA Mainsail
Sailing
Spinlock Sail Feeder
368
Spinlock / Transat
Spinlock
EJB Tiller Extensions
Spinlock Tiller Extensions
The asymmetric extension improves helming performance, with
more feedback for accurate and precise control, maintaining the
best helming position for optimum trim and visibility. The two
handed helming mode lets the arms relax into a more comfortable,
elbows down position, resulting in less fatigue and increased
concentration. The Parallel grip EJ has the same features of the
Asymmetric, but with a smaller grip. The compact solution for the
smaller cockpit and ideal for fast hiking and tacking.
▪▪Push-button adjustment
▪▪Torlon ball locking mechanism
▪▪Stainless steel swivel joint for precise universal movement
▪▪Fast pin for easy stowage
▪▪Integrated shock absorber
Asymmetrical
▪▪29-5/8” - 47-1/4”
SPI EA/1200AAmber
SPI EA/1200C Citrus
SPI EA/1200G Graphite
SPI EA/1200SSilver
▪▪23-5/8” - 35-7/16”
SPI EA/900AAmber
SPI EA/900CCitrus
SPI EA/900G Graphite
SPI EA/900SSilver
Parallel
▪▪23-5/8” - 35-7/16”
Sailing
SPI EJ900SSilver
SPI EJ900GGraphite
▪▪29-5/8” - 47-1/4”
SPI EJ1200SSilver
Replacement Parts:
SPI EJOINT
SPI EFASTPIN
SPI ECLIP
► Also See
Full swivel joint w/fastpin
Full swivel joint release pin
Tiller clip
Tiller Extensions pg 294 & 340
▪▪Strong, lightweight anodised aluminium tube
▪▪UV Resistant, extra tough
▪▪Swivels freely through the full 360 degrees
▪▪Spinflex holds tiller in helming position, 30 degrees above
horizontal for fast, reactive helming
▪▪Triple-wave handle gives a choice of secure grip positions
▪▪Responsive ‘feel’ and precise helm control
▪▪Less wrist and grip fatigue
SPI EJB/600B
SPI EJB/900B
600 mm Black
900 mm Black
Replacement Parts:
SPI EJB-CLIP
SPI EJB-JOINT
SPI EJB-KIT
Clip for extension
Spinflex joint
Extension service kit
Transat
Transat Anodized Aluminum Tubing
Sold per foot. (Some minimums apply)
TSM HT0010A
TSM HT0020A
TSM HT0030A
TSM HT0040A
TSM HT0050A
TSM HT0060A
TSM HT0070A
TSM HT0090A
5/8” x .0509”
1” x .065”
1-1/4” x .065”
1-1/2” x .065”
2” x .065”
2-1/2” x .083”
3” x .083”
4” x .125”
Transat Custom Spinnaker Poles
Made to order - Ends not included - comes with trip-line
TSM P0030A
TSM P0035A
TSM P0040A
TSM P0050A
TSM P0060A
TSM P0070A
► Also See
1" x 10’
1-1/4” x 10’
1-1/2” x 10’
2” x 10’
2-1/2” x 12’
3” x 14’
Forespar Pole Ends pg 291
369
Tylaska
Tylaska Halyard Shackles
Very high strength-to-weight ratio. A captive 17-4PH stainless pin makes for
trouble-free operation. The all-metal machined line thimble allows for use as
a 2-1 purchase without the wear or melting that occurs with plastic molded
thimbles. Lines can also be permanently spliced for a fixed halyard. Tylaska CNC machines the 3D shackles
from a solid block of aluminum. Type III hard coat anodizing protects against corrosion. Laser engraving
identifies the product without sacrifice to strength or risk of corrosion. A new generation design of the H8
further improves corrosion resistance and provides more thimble bearing area for 2-1 applications. The cross
pin is made from 17-4PH to resist wear and bending. The pin is made captive to prevent loss but still allows the full
throat width of the clevis. The size was made to fit standard sail headboards without adding any unnecessary weight.
Part #
A
mm
B
mm
C
mm
D
mm
E
mm
F
mm
G
mm
H
mm
I
mm
J
mm
Working
Load kg
Breaking
Strength kg
Line Size
(mm)
TYL H5
65.3
25.4
4.6
35.6
23.1
16.1
9.5
19.1
19.1
6.6
1,136
2,273
8
TYL H8
80.0
33.4
7.1
38.1
21.6
19.3
14.2
25.4
26.9
8.1
1,818
3,636
12
TYL H12
76.2
38.2
.313
50.8
30.5
22.4
14.3
30.1
28.6
9.5
2,727
5,455
12
Tylaska Trigger Release Shackles
T5 Snap Shackles are perfect for small boat applications, J-24s, Mumm 30s and
similar boats.
T8 Snap Shackles are ideal for the 24 to 36 foot sailboats.
T12 Snap Shackles are ideal for 30 to 45 foot boats.
Standard Bails provide ample room for attaching a line while keeping weight and
overall shackle length to a minimum. Ideal for halyards and sheets.
Large Bails provide room for up to three additional shackles or a combination of
shackles and lines. Ideal for spinnaker sheets, guys or other multi-line applications
A
mm
B
mm
C
mm
D
mm
E
mm
Thickness
mm
Working
Load kg
Breaking
Strength kg
TYL T5-STD BAIL
14.2
14.2
13.5
14.2
74.6
7.9
1,136
2,273
TYL T8-STD BAIL
17.5
16.7
15.1
16.7
87.3
9.9
4,000
3,636
TYL T8-LRG BAIL
17.5
16.7
24.6
25.4
92.1
9.9
1,818
3,636
TYL T12-STD BAIL
19.1
19.8
19.1
19.1
101.6
11.4
2,727
5,455
TYL T12-LRG BAIL
19.1
19.8
28.6
30.2
114.3
11.4
2,727
5,455
Part #
Tylaska J-Lock Shackle
Hi-tech fid is machined from solid
aircraft 6061-T6 aluminum and knurled for a more secure grip.
Front taper fits all Tylaska shackles and most other brands. Rear
thru hole allows easy attachment of a lanyard. An indispensable
tool for fast, safe release of lines under heavy load.
Easily spliced onto Genoa sheets,
outhauls and halyards, the new lowprofile Tylaska J-Locks fit through most
Genoa blocks for fast sheet changes.
Unique patented double-locking plunger locks in two
directions for the ultimate in flog-free operation.
▪▪Weight 1.9 Oz (54 gm)
▪▪Work load 4,000 lb (1,818 kg )
▪▪Breaking strength 8,000 lb (3,636kg)
▪▪Line size 8-10 mm
TYL T5-T12 FID
TYL J8
Sailing
Tylaska Aluminum Fid
370
Wichard
Wichard
Twisted Shackles
Drop forged 316L stainless steel.
Part #
Wichard
Self Locking Chain Shackles
WIC 1222
Extra strong, drop forged 316L stainless steel
shackles with self-locking feature offering the
assurance of no risk of unscrewing.
Dia.
I.D.
Breaking Load
WIC 1201
Part #
5/32"
17/32" x 11/32"
1,765 lbs
WIC 1202
3/16"
5/8" x 7/16"
2,645 lbs
WIC 1203
1/4"
25/32" x 1/2"
3,525 lbs
WIC 1204
5/16"
1-1/32" x 23/32"
6,615 lbs
WIC 1205
13/32"
1-5/16" x 7/8"
11,020 lbs
WIC 1206
15/32"
1-17/32" x 1"
13,225 lbs
Long Shackles
WIC 1211
5/32"
7/8" x 11/32"
1,765 lbs
WIC 1212
3/16"
1-5/32" x 7/16"
2,645 lbs
WIC 1213
1/4"
1-5/16" x 1/2"
3,525 lbs
WIC 1214
5/16"
1-25/32" x 23/32"
6,615 lbs
WIC 1215
13/32"
3-1/16" x 25/32"
11,020 lbs
Wichard
Wide Shackles
Sailing
Breaking Load
2,645 lbs
WIC 1223
1/4"
1-3/16" x 1/2"
3,530 lbs
WIC 1224
5/16"
1-9/16" x 23/32"
6,615 lbs
Wichard
Key Pin Shackles w/ Bar
Extra strong, drop forged 316L stainless steel
shackles, quick locking with half-turn.
Part #
Dia.
I.D.
Breaking Load
WIC 81432
3/16"
1-7/16" x 1/2"
2,645 lbs
WIC 81433
1/4"
1-3/4" x 5/8"
3,745 lbs
WIC 81434
5/16"
2-3/8" x 27/32"
5,510 lbs
Wichard
Key Pin Shackles
Part #
Dia.
I.D.
Breaking Load
WIC 1262
3/16"
1-13/32" x 25/32"
1,765 lbs
WIC 1263
1/4"
1-21/32" x 1"
3,300 lbs
WIC 1264
5/16"
2-1/4" x 1-1/4"
5,950 lbs
WIC 1265
13/32"
2-12/16" x 1-9/16"
8,900 lbs
Wichard
Bow Shackles
Drop forged 316L stainless steel.
Part #
I.D.
1-1/32" x 7/16"
Extra strong, drop forged 316L stainless steel
shackles, quick locking with half-turn.
Drop forged 316L stainless steel. The only choice
for the yachtsman who puts safety first. Features self
locking pin which will not loosen, even under the
most violent vibrations.
Part #
Dia.
3/16"
Dia.
I.D.
Breaking Load
WIC 1241
5/32"
25/32" x 11/32"
1,765 lbs
WIC 1242
3/16"
29/32" x 7/16"
2,645 lbs
WIC 1243
1/4"
1-1/16" x 1/2"
3,530 lbs
WIC 1244
5/16"
1-15/32" x 23/32"
6,615 lbs
WIC 1245
13/32"
1-13/16" x 25/32"
11,020 lbs
WIC 1246
15/32"
2-1/8" x 15/16"
16,535 lbs
Dia.
I.D.
Breaking Load
WIC 1432
3/16"
1-7/16” x 1/2”
2,645 lbs
WIC 1433
1/4"
1-3/4” x 5/8”
3,745 lbs
Stainless Steel
Wichard uses top-quality grades of stainless steel in its products. The first
type is a low carbon austenitic steel (316L), which offers good mechanical
characteristics. They are nonmagnetic steels and most of Wichard products
are manufactured in this grade. The second (17.4PH) is martensitic steel
(magnetic), which is referred to as high-resistance steel (HR).
Type
Austenitic
Martensitic
Common name
18.12 Mo
17.4 PH
European standard
X2CrNiMo17-12-2
X5CrNiCuNb 16-4
Us Aisi standard
316 L
630
Composition Carbon
< 0,03 %
< 0,07 %
Chromium
18 %
16,5 %
Nickel
12 %
4%
Molybdenum
3%
-
Copper
-
4%
371
Wichard
Wichard
Captive Pin Chain Shackles
Wichard Shackler
Drop forged 17-4 PH stainless steel with
bottle opener.
Extra strong, drop forged 316L stainless steel screw
pin shackles with a captive pin that cannot fall out
of the body when unscrewed. Self-locking.
Part #
WIC 10303
Dia.
I.D.
Breaking Load
WIC 1401
5/32"
1/2" x 5/16"
1,985 lbs
WIC 1402
3/16"
5/8" x 13/32"
3,310 lbs
Wichard Shackler / Spike
WIC 1403
1/4"
25/32" x 15/32"
4,630 lbs
Drop forged 17-4 PH stainless steel.
WIC 1404
5/16"
1-1/32" x 5/8"
8,160 lbs
WIC 10304
WIC 1405
13/32"
1-5/16" x 25/32"
11,465 lbs
Wichard
Stainless Steel Eye Straps
High strength forged 316L stainless steel.
Wichard
Captive Pin Long Shackles
Drop forged 316L stainless steel.
Length
Inside
Height
Max.
Load
Eye
WIC 9201
1-3/16"
5/16"
7/16"
880
1-3/16"
WIC 9202
1-7/8"
13/32"
1/2"
1,760
1-7/16"
2-1/8"
15/32"
5/8"
2,425
1-23/32"
2-3/8"
5/8"
13/16"
6,170
2-5/16"
Part #
Dia.
I.D.
Breaking Load
WIC 9203
WIC 1411
5/32"
1-7/32" x 5/16"
1,985 lbs
WIC 9204
WIC 1412
3/16"
1-17/32" x 13/32"
3,310 lbs
WIC 1413
1/4"
1-13/16" x 15/32"
4,630 lbs
WIC 1414
5/16"
2-7/16" x 5/8"
8,160 lbs
WIC 1415
13/32"
3-1/16" x 25/32"
11,465 lbs
Part #
Wichard
Stainless Steel Eye Bolts
Made of drop forged 316Lstainless steel. Metric thread.
Shank
Dia. x Length
Eye
Dia.
Breaking
Load
WIC 6490
1/4" x 1-9/16"
15/32"
2,200 lbs
WIC 6491
1/4" x 2-3/8"
15/32"
2,200 lbs
Part #
Wichard
Captive Pin Bow Shackles
Drop forged 316L stainless steel.
Part #
Dia.
I.D.
Breaking Load
WIC 1441
5/32"
11/16" x 5/16"
1,985 lbs
WIC 1442
3/16"
29/32" x 13/32"
3,310 lbs
WIC 1443
1/4"
1-1/16" x 15/32"
4,630 lbs
WIC 1444
5/16"
1-15/32" x 5/8"
8,160 lbs
WIC 1445
13/32"
1-13/16" x 25/32"
11,465 lbs
Extra strong, drop forged 316L stainless steel.
Part #
WIC 7304
Wire Dia.
E
P
1/8" - 3/16”
1/2”
1/16”-11/32”
Drop forged 316L stainless steel.
Dia.
I.D.
Breaking Load
WIC 1422
3/16"
1-15/32" x 13/32"
3,310 lbs
WIC 1423
1/4"
1-3/4" x 15/32"
4,630 lbs
WIC 1424
5/16"
2-5/16" x 5/8"
8,160 lbs
WIC 1425
13/32"
2-15/16" x 25/32"
11,465 lbs
Hot drop forged, extra strong 17-4 PH stainless steel.
Quick release mechanism can be opened manually or
using a fid.
Part #
WIC 2653
Length
A
B
Break Load
3-3/8"
11/16"
3/8"
2,880 lbs
Sailing
Wichard
Trigger Snap Shackles Swivel Eye “HR”
Wichard
Captive Pin Twisted Shackles
Part #
Wichard
Wire Grip
372
Wichard
2474
2476
Wichard
Quick Release Snap Shackle “HR”
Wichard
Clevis Pin Swivel Snap Shackles “HR”
Use these high quality quick release shackles for any application
where releasing under load is required. Ideal for spinnaker handling
and towing. Hot drop forged, extra strong 17-4 PH stainless steel.
Hot drop forged, extra strong 17-4 PH stainless steel snap shackles
with clevis pin.
Part #
L
A
B
Function
Break Load
WIC 2673
2-3/4"
9/16"
11/32"
2,425 lbs
3,750 lbs
WIC 2674
3-5/32”
5/8”
15/32”
3,525 lbs
5,100 lbs
WIC 2675
3-17/32"
25/32"
1/2"
4,400 lbs
6,600 lbs
Part #
L
Eye Dia.
Breaking Load
WIC 2474
2-3/4”
5/8”
3,750 lbs
WIC 2476
3-7/8”
13/16”
8,550 lbs
Wichard
Fixed Eye Snap Shackles
Wichard
Swivel Eye Snap Shackles “HR”
Hot drop forged, extra strong 316L stainless steel
fixed eye snap shackle.
Part #
Hot drop forged, extra strong 17-4 PH stainless
steel snap shackles with swivel eye.
Part #
WIC 2470
L
Eye Dia.
Breaking Load
WIC 2473
2-3/4"
7/16"
4,850 lbs
WIC 2475
3-1/2"
9/16"
8,490 lbs
Length
A
B
Break Load
1-3/8"
1-5/16"
1/4"
880 lbs
Wichard Fixed Eye Snap Shackles
A
Hot drop forged, extra strong 316L stainless steel
fixed eye snap shackle.
Sailing
Part #
Wichard
Carbine Hooks
B
Length
A
B
Break Load
WIC 2471
2"
5/8"
13/32"
4,450 lbs
WIC 2472
2-3/4”
53/64”
33/64”
6,600 lbs
Wichard
Large Bail Snap Shackles “HR”
Superior steel product, hot forged from high resistance stainless
steel. In the event of extreme stress, will deform long before
breaking. Will not burst or break suddenly. Hot drop forged, extra
strong 17-4 PH stainless steel.
Part #
L
A
B
Function
Break Load
WIC 2373
3-1/8"
5/8"
3/4"
2,645 lbs
4,850 lbs
WIC 2375
4-1/8"
13/16"
1-1/32"
3,525 lbs
8,490 lbs
Carbine hooks with torsion spring
closures formed 17-4 PH stainless steel.
Part #
Stock
Length
Eye Dia.
Break Load
Style
1/4"
2-3/8"
5/16"
1,320 lbs
1
WIC 2315
5/16"
3-5/32"
11/32"
3,550 lbs
1
WIC 2316
13/32"
4"
1/2"
5,500 lbs
1
WIC 2317
15/32”
4-5/8”
11/16”
8,400 lbs
1
WIC 2323
1/4"
2-3/8"
5/16"
1,765 lbs
2
WIC 2325
5/16"
3-5/32"
7/16"
3,750 lbs
2
WIC 2326
13/32"
4"
1/2"
5,730 lbs
2
WIC 2333
1/4"
2-3/8"
13/32"
1,320 lbs
3
WIC 2313
Wichard Opening Pre-Feeder
▪▪316 stainless steel
▪▪One hand open & close
▪▪Eliminates removing headsail from
luff groove
WIC 7485
373
Wichard
E
W
WIC 20705
WIC 21008
WIC 21510
WIC 22014
WIC 22517
N
Wichard
Friction Rings
6 ring (7MM ID)
10 ring (9MM ID)
15 ring (15MM ID)
20 ring (20MM ID)
25 ring (25MM ID)
E
N
Wichard Chain Gripper
W
▪▪Forged 316L stainless steel
▪▪Working load: 1590 lbs
▪▪Breaking load: 5290 lbs
▪▪Chain Grip: 5/16" (8mm)
▪▪Length: 103mm
Wichard Toe Rail Pad Eyes
Toe rail pad eyes are designed to protect toe rails
by spreading the load and reducing nicks and dents.
Can be fastened securely to the toe rail. Unscrewing
the unit part way allows it to slide, unscrew totally
to remove. Designed to fit standard toe rails.
Number
Rail Dia.
Min-Max
Rail Wall
Min-Max
Dia.
Work
lbs
Break
Load lbs
WIC 16613
3/8" - 1/2"
5/64" - 3/16"
9/16"
2650
6650
WIC 16615
15/16" - 19/32"
5/32" - 1/4"
23/32"
3300
8400
Wichard Folding Pad Eyes
WIC 2985
High strength forged 316L stainless steel. These
pad eyes fold down compactly when not in use.
Dimensions
Ring Stock
Dia.
Eye
Dia.
Breaking
Load
WIC 6504
1-3/4" x 1-3/4"
1/4"
9/16"
7,715 lbs
WIC 6505
2-5/16" x 2-5/16"
15/16"
3/4"
13,225 lbs
Part #
Wichard Snap Hooks
Hot drop forged standard snap hooks with torsion
spring closure. 316L stainless steel.
Part #
Length
Eye Dia.
Breaking Load
WIC 2480
2"
11/32"
660 lbs
WIC 2481
3"
15/32"
1,765 lbs
WIC 2482
4”
5/8”
3,300 lbs
Wichard Webbing Eye Strap
5/32" diameter 316L stainless steel with a perfect finish for low
wear on webs and ropes. Use #8 fasteners.
WIC 9211
Wichard Snap Hooks - “HR”
Wichard Water-Tight U-Bolts
Martenistic 17-4 PH steel stainless steel.
Part #
Length
Eye Dia.
Breaking Load
WIC 2381
3"
15/32"
1,440 lbs
WIC 2382
4"
11/16"
3,200 lbs
Part #
Wichard
Snatch Block
WIC 34500
Length
Break Load
15/32"
1040 kg
Stock
Length
I.D.
Colour
WIC 65331
1/4"
2-3/4"
15/16"
Black
WIC 65431
1/4"
2-3/4"
15/16"
White
Sailing
Single handed operation, snatch blocks are highly
useful for taking up a rope that is already reeved.
The elastomer moulded cheeks make them shock and
scratch-resistant. Each one is fitted with a snap shackle
which allows them to move freely in any position.
With its forged high-resistance stainless steel arm, the
closing system is very strong. It can be opened very
easily by pulling on the central plunger pin, as you
would do with a normal snap shackle.
Part #
High quality stainless steel U-bolt with water-tight
rubber collar means no leaks, no noise and no
vibration. Eliminates the need for messy silicone
sealers in most applications.
Wichard
Mooring Hooks
This hook and plate can be fitted to any pole.
Makes mooring buoy hook-up quick and easy.
Stock
Length
B
A
WIC 92327
Part #
15/32"
4-58"
5/8"
1"
WIC 92328
15/32”
6-11/16”
11/16”
1-1/8”
374
Wichard
Wichard Jacklines
Lyf’Safe by Wichard is a complete
jackline kit allowing safer operations and
offering added value to the crew.
Adaptable and universal
Wichard Boom Brake
▪▪Gybe operations are safer, potential accidents reduced and
without jerks with 3 friction positions
▪▪An easy installation on all kinds of boats
▪▪Can be used on main sail areas below 40 sq meters
▪▪Material: anodized aluminium
▪▪Supplied with line
WIC 7150
▪▪Lyf’Safe can tailored to the length of
the boat (using the adjuster) and can
be fitted on to most deck fastenings
(padeyes, pulpit/pushpit, cleats)
Ready-to-use
▪▪Easy to install, Lyf’Safe does
not require additional fastening
components such as shackles
Reflective
▪▪Thanks to its reflective stripe and photoluminescent
casing, Lyf’Safe can be easily identified when sailing
at night
Wichard Elastic Safety Tethers
Locking system of the webbing
▪▪The adjuster casing prevents any accidental
adjustment or release of the webbing
Elastic harness tether, conforms to B.S.1.
with 2 stainless steel carbine hooks.
Retracts from 2 to 1 meter - break load
4580 lbs.
Resistant and anti-chaffing
▪▪The anti-abrasion edges to the webbing prevent early
wear and fraying, the soft elastomer casing isolates
the deck, eliminating noise and vibrations
WIC 7001
WIC 7051
WIC 7052
WIC 7053
Retractable tether with 2 double action
hooks. Break load 4580 lbs.
Boats to 8.5m, 2/pkg
Boats to 11m, 2/pkg
Boats to 14m, 2/pkg
WIC 7005
Wichard Colour Glo Rigging Knives
Triple tether has 1- 3ft tether and
1 - 6ft. retractable tether. 3 double action
hooks - Break load 4580 lbs.
All these knives have been carefully designed for styling and
functionality. For improved usefulness Wichard blades are half
serrated. This unique feature permits cutting of heavy material and
modern composite rope without dulling the blade.
These high-quality stainless steel knives are available in assorted
colours. A tremendous value combining strength, corrosion
resistance, appealing colour and design.
Three styles available.
WIC 7006
▪▪Blade, shackle key w/bottle opener and spike
WIC 10062Fluorescent
WIC 10063*Black
▪▪Blade, shackle key w/bottle opener
Wichard
Double Action Safety Snaps
WIC 10053*Black
Sailing
The double action feature of this safety snap is easily operated with
one hand. Yet absolutely will not open unless this deliberate action
is taken. The eye will accommodate either rope or webbing.
Part #
L
SWL lbs
Break Load
Colour
WIC 2454
4-17/32"
3300
6,150 lbs
Yellow
WIC 2455
4-17/32"
3300
6,150 lbs
Blue
▪▪Single blade 2-3/4" long
WIC 10043*Black
WIC 10049*Orange
* Request Items
INDEX: Acc - Blu
REFERENCE:
Anchor Chart - Rocna............ 215
Anchor Chart - Transat.......... 221
Nova Kool Crossover............ 123
Select the Right Thruster....... 199
Select the Right Windlass..... 208
Wire Rigging Facts................ 280
BLUES SEA SYSTEMS:
Automatic Charging Relays..... 32
Battery Management............... 33
Battery Switches...................... 27
Correct Wire Size.................... 47
Fuse and Amperage................ 48
Fuse Holders........................... 49
HARKEN Reference Pages:
Block Loading Formulas........ 304
How to Order Battcars........... 335
How to Order Furling............. 328
How to Order Genoa Leads.. 319
How to Order Travelers......... 318
A
Access Hatches..................... 156
Adhesive Mounting Plates....... 55
Aerofast................................. 248
Air Conditioning.............. 109-110
Air Heaters............................ 136
Air Purifiers.............................111
Air Scoop Vent
Beckson............................. 155
AIS
AIS....................................... 64
Antennas.........................94-95
Almo
Battery Cable....................... 23
Boat Cable........................... 22
Primary Wire........................ 23
Aluminum Tubing................... 368
AM/FM Antennas..................... 96
Ammeters................................ 43
Anchor Buddy........................ 195
Anchor Marine
Step Fenders...................... 194
Stern Fenders.................... 194
Anchor Swivels...................... 195
Anchors
Rocna................................. 215
Transat Marine................... 221
Vulcan................................ 215
Antenna
Antennas.........................94-97
Connectors........................... 97
Extensions............................ 98
Antenna Mounts
Forespar............................. 295
Shakespeare...................97-98
Antifoul Alternative
Speed Polish...................... 144
Aqua Signal
Docking Lights........................ 4
Interior Lights......................... 5
Navigation Lights.................2-4
Plug Connectors..................... 2
Wireless Remote System....... 5
ARCO
Clevis Pins......................... 249
Eyes................................... 249
Forks.................................. 249
Swage Studs...................... 249
T-Terminals......................... 249
Autopilots
Furuno.................................. 66
AWAB Hose Clamps............. 138
B
Back Plates
Blue Wave.......................... 256
Backstay Accessories
Johnson.............................. 273
Bags, Harken......................... 337
Bailers................................... 337
Ball Stops, Loos.................... 275
Ball Valves............................. 166
Barometers............................ 232
Barrel Nuts, Beckson............. 156
Battcar Systems.................... 335
Battens, Sail.......................... 337
Batteries, Energy One............. 52
Battery Boxes.......................... 46
Battery Cable........................... 24
Battery Chargers
Blue Sea Systems................ 26
EFOY................................... 51
Professional Mariner............ 90
Battery Monitors
Magnum..........................78-79
Mastervolt............................. 87
Samllex...........................91-92
Battery Switches.................27-33
Battery Terminals..................... 53
BBQs
Dickinson............................ 108
Magma........................ 113-119
375
Beckson
Access Hatches................. 156
Barrel Nuts......................... 156
Clips................................... 154
Cup Holders....................... 156
Deck Plates........................ 154
Drain Plugs......................... 156
Drink/Horn Holder.............. 156
Eye Straps.......................... 156
Hand Pumps...................... 157
Log Books.......................... 157
Non-Slip............................. 157
Portlights.....................155-156
Vents.................................. 155
VHF Radio Holders............ 156
Winch Handle Holders....... 156
Beer Glasses......................... 160
Bells, Ship’s........................... 235
Bilge Pump Panel.................... 40
Bimini Supports..................... 174
Bird Repellers........................ 161
Blackout Curtains
Waterline Designs.............. 192
Blocks
Harken.........................304-315
RWO.................................. 338
Spinlock.............................. 366
Wichard.............................. 373
Blue Sea Systems
Add-A-Battery....................... 30
Ammeters............................. 43
Battery Boxes....................... 46
Battery Chargers.................. 26
Battery Switches.............27-33
Bilge Pump Panel................. 40
Breakers..........................38-41
Bus Bars..........................44-45
Cable Caps.......................... 45
Cable Clams......................... 45
Charging Relays..............30-32
Circuit Breakers...............38-41
Fuse Holders...................34-37
Fuses..............................34-37
Indicator Lights..................... 43
Labels................................... 42
Lock Slides........................... 43
Panels.............................40-43
Power Bars & Bars..........44-45
Solenoids............................. 31
Switches..........................38-43
Terminal Blocks...............44-45
Toggle Guards...................... 43
USB Chargers...................... 26
Vessel Systems Monitor....... 39
Voltmeters............................ 43
376
INDEX: Blu - Cus
Blue Wave
Architectural................263-265
Back Plates........................ 256
Clevis Pins......................... 259
Eye Bolts............................ 261
Eye Straps.......................... 261
Eyes............................255-258
Forks...................252-259, 265
Lubricant............................ 251
Nuts.................................... 259
Quick Rig Tune (QRT)........ 251
Rigging........................252-262
Shackles......................260-261
Smart Pins.......................... 251
Split Rings.......................... 259
Stemballs........................... 256
Stoppers............................. 263
Swage Eyes & Studs...254-255
Thimbles............................. 260
Toggles........................252-259
T-Rope Eyes...............255-256
T-Terminals......................... 256
Turnbuckles.................252-259
U-Bolts & V-Bolts................ 262
Boat Cable............................... 22
BoatLife
Git Rot................................ 140
Graphix Wax....................... 140
Putty................................... 139
Sealants............................. 139
Teak Cleaner & Oil......138-139
BoatMates
Cleats................................. 159
Organizers...................158-159
Boats
Odyssey............................. 228
Bollards, Clamcleat............... 287
Boom Brakes......................... 374
Boom Vangs, Forespar.......... 293
Boomkickers, Seoladair......... 354
Bosun’s Chair........................ 337
Bottle Openers...................... 239
Bow Thrusters................198-203
Bowl Cleaners, Heads........... 135
Braided Sleeving
Techflex.......................100-101
Bronze Wool
Shurhold............................. 146
Western Pacific Trading..... 151
Brooms
Camco................................ 160
Shurhold............................. 145
Brushes..........................145-146
Buckets, Collapsible
Camco................................ 160
Nauticalia........................... 231
Bullseyes
RWO.................................. 345
Spinlock.......................336-367
Bungs, RWO......................... 344
Burgees................................. 353
Bus Bars.............................44-45
Bushes, RWO........................ 344
Butyl Tape.............................. 141
C
Cable
Caps..................................... 46
Clamps................................. 55
Clams................................... 46
Cutters.................................. 57
Diameter Gauge................. 275
Ties....................................... 56
Cam Cleats
Harken.........................316-317
RWO.................................. 339
Spinlock.............................. 365
Camco
Broom................................. 160
Collapsible Buckets............ 160
Dish Rack........................... 160
Glassware.......................... 160
Plates................................. 160
Camera Mounts..................... 172
Canada Metal Chain.............. 194
Canoe Trolley
C-Tug................................. 227
Cap Holder, Harken............... 336
Capstan
Maxwell.......................205-208
Captain Tolly’s....................... 140
Captain’s Hats....................... 230
Carabiners
Transat Marine................... 178
Wichard.............................. 372
Carbo Racing Foils................ 334
Cards, Greeting..............244-245
Cars
Forespar............................. 292
Harken.........................318-322
RWO.................................. 347
Caulking
Teakdecking Systems........ 151
CB Radio............................... 105
CD Players.........................67-68
Chafe Protectors
Forespar............................. 293
Chain..................................... 194
Chain Gripper........................ 373
Chain/Rope, Maxwell............ 207
Chairs, Garelick..................... 161
Chart Light
Aqua Signal............................ 5
IYE..................................... 337
Lunasea............................... 11
Chartplotters.......................59-60
Chocks
Forespar......................292-293
Transat Marine................... 181
Circuit Breakers..................38-41
Clamcleats......................283-289
Cleats
BoatMates.......................... 159
Clamcleat....................283-289
Folding............................... 274
Forespar............................. 294
Johnson.......................273-274
Marelon.............................. 294
Rail..................................... 273
RWO.................................. 339
Transat Marine................... 181
Clevis Pins
ARCO................................. 249
Blue Wave.......................... 259
Johnson.............................. 270
RWO.................................. 352
Clevis Rings
Blue Wave.......................... 259
Johnson.............................. 270
RWO.................................. 352
Clinometers
Lev-O-Gage....................... 337
Nauticalia........................... 232
Clips
Beckson............................. 154
RWO...........................351-352
Wire Rope.................. 180, 371
Clocks.................................... 232
Coat Hooks............................ 243
Cold Cure.............................. 148
Compasses........................... 233
Cone Wedges, Sta-Lok......... 277
Connectors, Electrical........53-56
Cookware....................... 117-118
Cotter Pins............................. 248
Creeping Crack Cure............. 140
Crimpers, FTZ......................... 57
C-Tug..................................... 227
Cup Holders
Beckson............................. 156
Boatmates.......................... 158
Railblaza............................ 171
Cushions............................... 241
Custom Spinnaker Poles
Transat Marine................... 368
INDEX: Dav - For
D
Davit Kits............................... 227
DC Panels..........................40-41
Deck Chairs........................... 161
Deck Fills
Marelon.............................. 169
Deck Fittings, RWO............... 346
Deck Labels, RWO................ 353
Deck Lights
Forespar............................. 295
Rigid................................18-20
Deck Organizers
Harken................................ 315
Spinlock.......................336-367
Deck Plates
Beckson............................. 154
RWO.................................. 345
Deck-Guard Bird Repellers... 161
Deckware, Spinlock........356-361
Dehumidifiers
Eva-Dry...............................111
Depth Sounders.................59-60
Dickinson
BBQs.................................. 108
Heaters............................... 108
Dish Racks
Camco................................ 160
Nauticalia........................... 239
Dive Bottle Holders................ 175
Dometic
Air Conditioning........... 109-110
Air Purifiers..........................111
Sealand.......................126-134
Ice Makers...........................111
Drain Plugs
Beckson............................. 156
Marelon.............................. 169
RWO.................................. 344
Drains, Marelon..............166-169
Drink Holders
Beckson............................. 156
BoatMates.......................... 158
Railblaza............................ 171
Drink Protection
L’il Sucker Snap Capp........ 245
Dry Bags................................ 337
Duffel Bags............................ 337
Dyform Wire.......................... 278
E
EFOY....................................... 51
Electrical
AC Panels............................ 41
Battery Switches.............27-33
Bilge Pump Panel................. 40
Blue Sea Systems...........25-49
Breakers..........................38-41
Bus Bars..........................44-45
Circuit Breakers...............38-41
Connectors......................53-56
DC Panels.......................40-41
FTZ..................................53-56
Fuse Holders...................34-37
Fuse Panels....................35-36
Fuses..............................34-37
Panels.............................40-43
Shore Power Connectors..... 99
Solenoids............................. 31
Switches..........................40-43
Tape..................................... 56
Techflex.......................100-101
Wire.................................22-24
Electronics
Furuno.............................59-66
Fusion.............................67-73
Hatteland Displays............... 84
Jensen.................................. 73
Maretron..........................81-85
Shakespeare...................94-98
Uniden.........................102-105
Energy One Batteries.............. 52
Engine Room Light.................. 13
Engines, LEHR...............225-226
English Braid
Polyester Line.................... 195
Whipping Twine.................. 195
Epifanes................................ 140
Epoxy
System Three..............149-151
Teakdecking Systems........ 151
Eva-Dry..................................111
Exit Box, Forespar................. 294
Eye Bolts
Blue Wave.......................... 261
Wichard.............................. 371
Eye Straps
Beckson............................. 156
Blue Wave.......................... 261
Gloma................................. 299
Harken................................ 301
RWO.................................. 351
Transat............................... 182
Wichard...................... 371, 373
Eyeglass Straps, Harken....... 336
377
Eyes
ARCO................................. 249
Blue Wave...................255-258
Sta-Lok............................... 276
F
Fairleads
Harken.........................302-303
RWO...........................345-346
Spinlock.......................336-367
Fast Pins, Aerofast................ 248
Fender Hangers, Transat...... 221
Fids
Samson.............................. 219
Tylaska............................... 369
Fillet Tables........................... 173
Fish Finder Mounts................ 172
Fish Finders........................59-60
Flag Poles, Railblaza............. 175
Flags
Burgees & Pennants.......... 353
Pirate.................................. 240
Flashlights
Navisafe............................... 17
Rigid..................................... 20
Float Line............................... 212
Floodlights
Aqua Signal............................ 5
Lunasea............................... 13
Rigid................................18-19
Flotation Wear................356-361
Flourescent Lights................... 12
Folding Buckets
Camco................................ 160
Nauticalia........................... 231
Foot Switches........................ 207
Forespar
Antenna Rail Mount............ 294
Boom Vangs....................... 293
Cars.................................... 292
Chafe Protectors................ 293
Chocks........................292-293
Cleats................................. 294
Davit Kit.............................. 227
Deck Lights........................ 295
Exit Box.............................. 294
Jib Roller............................ 293
Lanocote............................ 141
Lightning Master................. 295
Marelon ......................166-169
Marelube............................ 141
Mast Pad Eyes................... 292
Mast Pole Chocks.............. 293
Nash Labels....................... 295
378
INDEX: For - Hul
Forespar cont.
Shackle Guards.................. 293
Spinnaker Poles Ends........ 291
Stanchion Mount Chocks... 292
Tea Tree Power.................. 141
Tiller Extensions................. 294
TruPlug............................... 295
Whisker Poles.............290-291
Winch................................. 295
Water Light......................... 295
Forks
Blue Wave...........252-259, 265
Sta-Lok............................... 276
Formers, Sta-Lok................... 277
Freezers/Fridges............120-123
Friction Rings........................ 373
FTZ
Adhesive Mounting Plates.... 55
Battery Terminals................. 53
Cable Clamps....................... 55
Cable Ties............................ 56
Electrical Connectors......53-56
Heat Shrink.......................... 53
Lugs..................................... 56
Spiral Wrap.......................... 55
Split Loam............................ 55
Tape..................................... 56
Tools................................56-57
Fuel Cell Battery Charger
EFOY................................... 51
Fuel Tank Vents..................... 168
Fuel Whistle, Green Marine... 161
Furling
Harken.........................327-332
RWO.................................. 349
Furuno
AIS....................................... 64
Auto Pilots............................ 66
Chart Plotters..................59-60
Fish Finders....................59-60
GPS.................................59-63
Instruments.....................63-66
Radars.............................59-62
Transducers......................... 65
Fuses
Blue Sea Systems...34-37, 203
Holders/Blocks................34-37
Magnum............................... 77
Max Power......................... 203
Panels.............................35-36
Samlex................................. 92
Fusion.................................67-73
G
Galileo Thermometers....232-233
Galley Cloths......................... 238
Garelick Deck Chairs............. 161
Gear Bags
BoatMates.......................... 159
Harken Sport...................... 337
Giftware, Nauticalia........230-245
Git Rot................................... 140
Glass Bottles & Floats........... 241
Glasses, Drinking
Camco................................ 160
Nauticalia....................236-237
Glasses, Reading.................. 231
Gloma
Anchor Swivels................... 195
Eye Straps.......................... 299
Shackles......................296-299
Gloves, Sailing...................... 336
GPS
Furuno.............................59-63
Maretron............................... 82
GPS Mounts
Railblaza............................ 171
Graphix Wax.......................... 140
Grappling Hook..................... 195
Green Marine Fuel Whistle.... 161
Greenfield
Anchor Buddy..................... 195
Grappling Hook.................. 195
Greeting Cards...............244-245
Grills
Dickinson............................ 108
Magma........................ 113-119
Gudgeons.......................342-343
H
Hailers..................................... 98
Halyard Stoppers, RWO........ 352
Handi-Lift............................... 177
Harken
Back Stay Adjusters........... 333
Battcar Systems................. 335
Blocks..........................304-315
Cam Cleats.................316-317
Carbo Racing Foils............. 334
Deck Organizers................ 315
Eye Straps.......................... 301
Fairleads.....................302-303
Furling.........................327-332
Hoisters.............................. 336
Pad Eyes.....................300-301
Shackles......................300-301
Stand Up Bases................. 315
Tiller Extensions................. 325
Track.................................. 318
Travelers.....................318-322
Winch Grease.................... 325
Winch Handles................... 325
Winches............................. 326
Harken Sport...................... 336
Harken Sport
Bosun’s Chair..................... 337
Cap Holder......................... 336
Eyeglass Straps................. 336
Roll-Top Bag....................... 337
Sailing Gloves.................... 336
Wallet................................. 336
Harnesses, Spinlock.............. 360
Hatch
Blackout Curtains............... 192
Lifts..................................... 165
Mosquito Nets.................... 192
Hats & Caps...................230-231
Hatteland Displays.................. 74
Headlamp................................ 17
Heads
Bowl Cleaner...................... 135
Sani Pottie.......................... 131
Sealand.......................126-131
Tank Deodorant.................. 135
Toilet Tissue....................... 135
Vacuflush.....................126-129
Heat Shrink.............................. 53
Heat Tools, FTZ....................... 56
Heaters
Dickinson............................ 108
Webasto............................. 136
Hoisters................................. 336
Holders
Beckson............................. 156
Railblaza.....................170-176
Winch Handle..................... 156
Holding Tanks
Indicator............................. 134
Tanks...........................127-133
Treatment........................... 135
Vents.................................. 134
Hooks
Mooring.............................. 373
RWO...........................351-352
S-Hooks............................. 180
Snap................................... 178
Hose Adaptors/Fittings
Marelon.............................. 167
Sealand.......................133-134
Hose Clamps......................... 138
Hose Nozzle.......................... 146
Hose, Sanitation.................... 134
Hullkote, McLube................... 144
INDEX: Ice - Lun
I
Ice Makers..............................111
Inclinometers......................... 232
Inflatable
Boats.................................. 228
Navisafe LED Lights........15-16
Railblaza Accessories.171-176
Railblaza Mounts................ 170
Walker Bay......................... 228
Inflatable Vests
Re-Arm Kits........................ 165
Spinlock.......................356-360
Inspection Covers, RWO....... 345
Instrument Cover................... 177
Instruments
Furuno.............................63-66
Maretron............................... 85
Intellisteer.............................. 163
Inverters
Magnum..........................75-79
Mastervolt............................. 88
Samlex............................91-92
iPad Holder............................ 171
iPod Dock Stereos..............67-71
IYE
Bailers................................ 337
Mast Rings......................... 337
Reading Lights................... 337
J
Jacklines, Wichard................ 374
Jam Cleats, RWO.................. 339
Jensen Sirius Receiver............ 73
Jib Rollers.............................. 293
J-Lock Shackle...................... 369
Johnson
Backstay Accessories........ 273
Circular Pins....................... 270
Cleats..........................273-274
Clevis Pins......................... 270
Conversion Sleeves........... 270
Hinged Pad Eye................. 274
Life Line Fittings..........267-272
Link Plates.......................... 272
Safety Pins......................... 270
Sealube.............................. 270
Shroud Cleats ................... 273
Snap Gate Repair Kit......... 267
Spliced Line Fittings........... 274
Stanchion Eye.................... 269
Stay Adjusters.................... 273
Studs.................................. 269
Toggles........................268-272
Turnbuckles.................267-272
Wrap Pins........................... 267
K
Kayak
Harken Hoisters................. 336
Navisafe LED Lights........15-16
Railblaza Accessories.171-176
Railblaza LED Lights.......... 175
Railblaza Mounts................ 170
Trolley, C-Tug..................... 227
Wall Slings.......................... 175
Key Chains.....................242-243
Knee Pads............................. 360
Knives, Rigging..................... 374
L
Labels
Blue Sea Systems................ 42
Forespar............................. 295
Lamps.................................... 241
Lanocote................................ 141
Lash-It................................... 218
LED Lights
Aqua Signal.........................2-6
Lunasea............................7-13
Navisafe..........................15-17
Plug Light............................. 20
Rigid................................18-20
LEHR
Propane Motors...........225-226
Propane Tanks................... 226
Leland
Re-Arm Kits........................ 165
Rust Prevention Bags........ 165
Strobe................................. 165
Lenco
Hatch Lifts.......................... 165
Trim Tabs.....................164-165
Lev-O-Gage........................... 337
Life Line Fittings.............267-272
Lifesafe
Bimini Bandage Tape......... 142
Boat Cover Tape................ 142
Butyl Tape.......................... 141
Hatch Tape......................... 142
Mast Boot Tape.................. 142
Non-Skid Tape.............141-142
Rigging Tape...................... 142
Sail Patch Tape.................. 142
379
Lifevest Pylon Light............... 358
Lightning Master
Forespar............................. 295
Lights
Aqua Signal.........................2-6
Blue Sea Systems................ 43
Docking............................ 4, 20
Flood.....................5, 13, 18-19
Flourescent.......................... 12
Forespar............................. 295
Forespar Decklight............. 295
Interior Lights..............5, 10-13
IYE..................................... 337
Light Bars............................. 11
Lunasea............................7-13
Navigation.........................2-15
Navisafe..........................15-17
Panel Indicator..................... 43
Plug Light............................. 20
Pylon.................................. 358
Railblaza............................ 175
Reading.......................5, 10-12
Rigid................................18-20
Spreader.............................. 13
Underwater........................... 20
L’il Sucker Snap Capp .......... 245
Link Plates, Johnson............. 272
Locking Wire.......................... 151
Log Books
Beckson............................. 156
Loos
Ball Stops........................... 275
Cable Diameter Gauge...... 275
Nicropress Sleeves............ 275
Tension Gauges................. 275
Lubricants
Blue Wave.......................... 251
Forespar............................. 141
Harken Winch Grease........ 325
Johnson ............................. 270
Lanocote............................ 141
Marelube............................ 141
McLube.............................. 144
Sealube.............................. 270
Shurhold............................. 146
Snap Stick.......................... 146
Lugs, FTZ................................ 56
Lunasea
Bulbs.................................7-10
Engine Room Light............... 13
Interior Lights..................10-13
Spot & Flood Lights.............. 13
Spreader Light...................... 13
380
INDEX: Maf - Out
M
Maffioli................................... 197
Magma
BBQs & Grills.............. 113-119
Cookware.................... 117-118
Umbrellas........................... 118
Magnifying Glasses............... 234
Magnum.............................76-79
Marelon
Ball Valves.......................... 166
Cleats................................. 294
Deck Fills............................ 169
Drain Plugs......................... 169
Drains..........................166-169
Hose Adaptors.................... 167
Hose Fittings...................... 167
Seacocks............................ 166
Sink Fittings........................ 168
Strainers............................. 166
Tank Vents.......................... 168
Thru-Hulls....................166-168
Valves......................... 166, 168
Vented Loops..................... 168
Well Drains......................... 169
Y-Connectors...................... 168
Y-Valves............................. 168
Marelube............................... 141
Maretron.............................81-85
Mast Boots, SSI..................... 177
Mast Compound
Spartite............................... 354
Mast Hardware
IYE..................................... 337
RWO.................................. 350
Mast Pad Eyes, Forespar...... 292
MasterFlush........................... 130
Mastervolt...........................87-89
Mats, Matworks..................... 169
Matworks............................... 169
Max Power Thrusters.....198-203
Maxwell
Breaker Panels................... 207
Foot Switches..................... 207
Pressure Arm Kits.............. 207
Remotes............................. 207
Rope/Chain........................ 207
Solenoids........................... 207
Windlasses..................205-208
McLube
Hullkote.............................. 144
One Drop............................ 144
Sailkote.............................. 144
Speed Polish...................... 144
Mildew Control....................... 141
Mobri Radar Reflectors......... 169
Mops...................................... 145
Mosquito Nets
Waterline Designs.............. 192
Motor Lift............................... 177
Mugs...............................239-237
N
Nash Labels.......................... 295
Nauticalia
Beanies.............................. 230
Bosun’s Call....................... 235
Bottle Openers................... 239
Canvas Prints..................... 236
Captain’s Hats.................... 230
Chairs................................. 161
Clocks & Barometers......... 232
Coasters..................... 237, 239
Coat Hooks........................ 243
Compasses........................ 233
Cushions............................ 241
Dash Board Pads............... 233
Dish Rack &Trivets............. 239
Drinking Glasses................ 237
Folding Buckets.................. 231
Galley Clothes.................... 238
Games................................ 234
Glass Floats & Bottles........ 241
Greeting Cards............244-245
Hats.............................230-231
Inclinometers...................... 232
Key Rings....................242-243
Lamps................................ 241
Lanyards............................ 235
Laundry Bag....................... 231
Lighter................................ 235
Magnets............................. 243
Magnifying Glasses............ 234
Mugs...........................236-237
Mutinometer....................... 232
Non-Skid............................ 238
Pencil Sharpeners.............. 234
Pirate Flags........................ 240
Place Mats..................237-238
Reading Glasses................ 231
Salt & Pepper Shakers....... 239
Sea-Searcher Magnet........ 231
Sextants............................. 233
Ship’s Bells......................... 235
Socks................................. 230
Telescope........................... 234
Thermometers.............232-233
Towel/Cloths....................... 238
Weather Stations................ 233
Wine Opener...................... 239
Wooden Boats.................... 240
Navigation Lights
Aqua Signal.........................2-4
Lunasea............................9-10
Navisafe..........................15-16
Navisafe.............................15-17
Nicropress Sleeves............... 275
Noise Barriers
Soundown.......................... 177
Non-Slip
Beckson............................. 157
Lifesafe........................141-142
Nauticalia........................... 238
Nova Kool.......................120-123
Novabraid
Dinghy Braid....................... 212
Nova Gold.......................... 213
Nova Lite............................ 212
Nova Lite HP...................... 211
Polyspec............................. 211
Shock Cord........................ 213
Spectec 12......................... 212
Sprint Cord......................... 211
XLE Performer................... 210
XLE-Z Feel......................... 212
Nozzles.................................. 146
Nuts
Blue Wave.......................... 259
Johnson.............................. 273
O
Oarlocks
Railblaza............................ 174
RWO.................................. 341
Odour Eliminator
Tea Tree Power.................. 141
Odyssey
Inflatables Boats................. 228
One Drop, McLube................ 144
Organizers
BoatMates...................158-159
Railblaza.....................170-176
Ormiston
Dyform Wire....................... 278
Osborn
Sail Palms.......................... 213
Sailing Needles.................. 213
Outboard Motors
LEHR...........................225-226
INDEX: Pad - Sam
P
Pad Eyes
Forespar............................. 292
Harken.........................300-301
Johnson.............................. 274
Transat Marine................... 182
Wichard.............................. 373
Panther Rope Cutting Gun.... 213
Pins
Circular............... 259, 270, 352
Clevis......... 249, 259, 270, 352
Cotter................................. 248
Fast.................................... 248
Safety................................. 270
Smart.................................. 251
Pintles.............................342-343
Placemats.......................237-238
Plastream Sail Battens.......... 337
Plates, Galley
Stack-A-Plate..................... 160
Plug Connectors........................ 5
Plug Light................................ 20
Polycarbonate Glasses......... 160
Portlights........................155-156
Pots & Pans.................... 117-118
Power Bars & Posts...........44-45
Pre-Feeder
Spinlock.............................. 367
Wichard.............................. 372
Proctor Spinnaker Poles........ 354
Professional Mariner
Battery Chargers.................. 90
Propane
Holders............................... 175
Lockers............................... 124
Motors, LEHR..............225-226
Propane Tanks
LEHR.................................. 226
Seaward............................. 124
Viking................................. 135
Propellers.......................184-188
Pumps
Discharge........................... 133
Hand, Beckson................... 157
Putty...................................... 139
Pylon Light............................. 358
Q
Quick Links............................ 179
Quick Pins, Aerofast.............. 248
Quick Release Hooks............ 348
Quick Rig Tune ..................... 251
R
Radar Reflectors................... 169
Radars................................59-62
Radex Heater........................ 108
Rail Fittings............................ 183
Railblaza.........................170-176
Reading Glasses................... 231
Re-Arm Kits........................... 165
Refrigerators...................120-123
Remote System, Aqua Signal.... 5
Rescue Tape......................... 144
Resins............................149-151
Rigid LED Lights.................18-20
Rings
D-Rings.............................. 181
Round................................. 180
Split.................... 259, 270, 352
Triangle.............................. 181
Rocna Anchors...................... 215
Rod Holders.......................... 171
Rope
English Braid...................... 195
Maffioli................................ 197
Nova Braid..................210-213
Sail Twine........................... 219
Samson.......................217-219
Rope & Chain, Spliced.......... 207
Rope Brush........................... 146
Rope Clutches................363-365
Rope Cutting Gun.................. 213
Rope Protection, Spinlock..... 367
Rope Stoppers, RWO............ 352
Rot Fix................................... 150
Rust Prevention Bags............ 165
RWO
Blocks................................. 338
Bungs................................. 344
Burgees.............................. 353
Bushes............................... 344
Cam Cleats........................ 339
Cars.................................... 347
Cleats................................. 339
Clevis Pins......................... 352
Clevis Rings....................... 352
Clips............................351-352
Deck Fittings...................... 346
Deck Labels....................... 353
Deck Plates........................ 345
Drain Plugs......................... 344
Eye Straps.......................... 351
Fairleads.....................345-346
Furling................................ 349
Gudgeons....................342-343
Halyard Stoppers............... 352
Hooks..........................351-352
Inspection Covers.............. 345
381
Jam Cleats......................... 339
Mast Hardware................... 350
Oarlocks............................. 341
Pintles.........................342-343
Quick Release Hooks......... 348
Rigging Links...................... 352
Rope Stoppers................... 352
Shackles............................. 352
Sheaves............................. 338
Sister Clips......................... 351
Slides................................. 347
Spinnaker Hardware.......... 348
Standup Springs................. 352
Stay Adjusters.................... 349
Swivels............................... 352
Tiller Hardware............341-343
Trapeze Gear..................... 348
Travelers............................ 347
Webbing Loops.................. 341
S
Safety
Forespar............................. 295
Mobri.................................. 169
Spinlock.......................356-361
Wichard.......................371-373
Safety Lines
Spinlock.............................. 360
Wichard.............................. 374
Sail Feeder
Spinlock.............................. 367
Sail Palms............................. 213
Sail Stickers, RWO................ 353
Sail Twine.............................. 219
Sailing Gloves....................... 336
Sailing Needles..................... 213
Sailkote.................................. 144
Salt & Pepper Shakers.......... 239
Samlex
Battery Monitors..............91-92
Fuse Kits.........................91-92
Inverters..........................91-92
Remote Panels................91-92
Samson
AmSteel Blue..................... 217
Fids.................................... 219
Lash-It................................ 218
MLX.................................... 218
Pro-Set............................... 218
Splicing Manual.................. 219
Starter Cord........................ 218
Ultra-Lite............................. 217
Warp Speed II.................... 217
XLS Extra........................... 218
382
INDEX: San - Sta
SaniPottieToilets.................... 131
Seacocks............................... 166
Sealand
Bowl Cleaner...................... 135
Dip Tube Kits...................... 133
Discharge Pumps............... 133
Holding Tanks..............127-133
Hose................................... 134
Hose Fittings...................... 134
MasterFlush....................... 130
Parts................................... 127
Pump Out Adapters............ 133
Relief Valves...................... 133
Sailvac................................ 128
SaniPottie........................... 131
Tank Treatments................. 135
Tank Watch......................... 134
Toilet Tissue....................... 135
Traveler.............................. 131
VacuFlush...................126-129
Vent Filters......................... 134
Sealants
BoatLife.............................. 139
Seaward
Propane Lockers................ 124
Propane Tanks................... 124
Stoves................................ 124
Water Heaters.................... 125
Selden Spars
Spinnaker Poles................. 354
Self-Fusing Tape............. 56, 144
Seoladair Boomkickers.......... 354
Sextants................................ 233
Shackle Guard
Forespar............................. 293
Shackle Keys
Wichard.............................. 371
Shackles
Blue Wave...................260-261
Gloma..........................296-299
Harken.........................300-301
RWO.................................. 352
Titan................................... 220
Tylaska............................... 369
Wichard.......................370-371
Shakespeare
AIS..................................94-95
AM/FM.................................. 96
Connectors........................... 97
Extensions............................ 98
Mounts............................97-98
Sirius.................................... 97
Speakers.............................. 98
TV......................................... 96
VHF.................................94-95
Wi-Fi..................................... 95
Sheaves
RWO.................................. 338
Sherman Johnson..........267-274
Ship’s Bells............................ 235
Shock Cord............................ 213
Shore Power
Smart Plug........................... 99
Shurhold
Bronze Wool....................... 146
Brooms & Mops.................. 145
Brushes & Handles.....145-146
Hose Nozzle....................... 146
Rope Brush........................ 146
Snap Stick.......................... 146
Towels................................ 146
Sink Fittings, Marelon............ 168
Sirius
Antennas.............................. 97
Receivers............................. 73
Sister Clips............................ 351
Ski Pylon............................... 177
Smart Pins
Blue Wave.......................... 251
Johnson ............................. 267
Smart Plug............................... 99
Smartphone Windmeters....... 190
Snap Capp............................ 245
Snap Shackles
Transat Marine................... 178
Wichard.......................371-373
Snap Stick............................. 146
Snaps
Transat Marine............178-179
Wichard.......................371-373
Snatch Block, Wichard.......... 373
Socks..................................... 230
Solenoids
Blue Sea Systems................ 31
Maxwell.............................. 207
Sound Barriers, Soundown... 177
Sounder Mounts, Railblaza... 172
Sounders............................59-60
Soundown Noise Barrier....... 177
Spartite
Mast Compound................. 354
Speakers
Fusion.............................71-72
Shakespeare........................ 98
Speed Polish, McLube.......... 144
Spinlock
Blocks................................. 366
Bullseyes.....................366-367
Cam Cleats........................ 365
Cutter................................. 360
Deck Organizers.........336-367
Deckware....................356-361
Fairleads.....................336-367
Harnesses.......................... 360
Inflatable Vests............356-360
Knee Pads.......................... 360
Pouches............................. 361
Pylon Light......................... 358
Rope Clutch................363-365
Rope Protection................. 367
Safety Lines....................... 360
Sail Feeder......................... 367
Spinnaker Block................. 366
Tiller Extensions................. 368
Winchfeeder....................... 367
Wrist Support..................... 360
Spinlock Deckware.........356-361
Spinnaker Hardware
Forespar......................291-293
IYE..................................... 337
RWO.................................. 348
Spinlock.............................. 366
Spinnaker Poles
Proctor................................ 354
Selden Spars...................... 354
Tubing................................ 368
Spiral Wrap
FTZ....................................... 55
Techflex.............................. 100
Spliced Line Fittings
Johnson.............................. 274
Splicing Kit & Manual............ 219
Split Loam
FTZ....................................... 55
Techflex.............................. 100
Split Rings
Blue Wave.......................... 259
Johnson.............................. 270
RWO.................................. 352
Spreader Light
Forespar............................. 295
Lunasea............................... 13
SSI
Instrument Cover................ 177
Mast Boots......................... 177
Stainless Outfitters
Handi-Lift............................ 177
Sta-Lok
Cone Wedges.................... 277
Eyes................................... 276
Forks.................................. 276
Formers.............................. 277
Studs.................................. 277
Stanchion Mount Chocks
Forespar............................. 292
Stanchions & Fittings
Johnson.............................. 269
Transat............................... 183
Stand Up Bases & Springs
Harken................................ 315
RWO.................................. 352
Sta-Plug
Forespar............................. 295
Starter Cord........................... 218
INDEX: Sta - Tyl
Stay Adjusters
Johnson.............................. 273
RWO.................................. 349
Stemballs
Blue Wave.......................... 256
Step Fenders......................... 194
Stereos...............................67-73
Stern Fenders........................ 194
Stern Thrusters...............198-203
Stoppers
Blue Wave.......................... 263
Johnson.............................. 270
Stoves
Seaward............................. 124
Strainers
Inlet.................................... 168
Scoop................................. 166
Strobes.................................. 165
Sub Woofers............................ 72
Swage Eyes
ARCO................................. 249
Blue Wave.......................... 255
Swage Studs
ARCO................................. 249
Blue Wave...................254-255
Johnson.............................. 269
Switches
Blue Sea Systems...........40-43
Foot.................................... 207
Toggle................................... 42
Swivels
RWO.................................. 352
Transat Marine............178-179
Swivl-Eze
Ski Pylon............................ 177
System Three.................149-151
T
Tank Deodorant..................... 135
Tape
Bimini Bandage.................. 142
Boat Cover......................... 142
Butyl Tape.......................... 141
FTZ....................................... 56
Hatch.................................. 142
Lifesafe........................141-142
Mast Boot........................... 142
Mylar.................................. 177
Non-Skid.............141-142, 157
Rescue Tape...................... 144
Rescue Tape...................... 144
Rigging............................... 142
Sail Patch........................... 142
Self-Fusing................... 56, 144
Tear-Aid.............................. 151
T-Ball Terminals
ARCO................................. 249
Tea Tree Power..................... 141
Teak Cleaner
BoatLife.............................. 139
Teakdecking Systems........ 151
Teak Oil, BoatLife.................. 139
Teakdecking Systems............ 151
Tear-Aid................................. 151
Techflex..........................100-101
Telescopes............................ 234
Tension Gauges, Loos........... 275
Terminal Blocks..................44-45
Tethers
Spinlock.............................. 360
Wichard.............................. 374
Thermometers
Magma............................... 118
Nauticalia....................232-233
Thimbles
Blue Wave.......................... 260
Transat Marine................... 181
Thru-Hull Plug....................... 295
Thru-Hulls.......................166-168
Thrusters
Max Power..................198-203
Tiller Extensions
Forespar............................. 294
Harken................................ 325
RWO.................................. 340
Spinlock.............................. 368
Transat Marine................... 340
Tiller Hardware, RWO........... 341
Titan Shackles....................... 220
Toggle Switches...................... 42
Toggles
Blue Wave...................252-259
Johnson.......................268-272
Toilets
Bowl Cleaner...................... 135
Sani Pottie.......................... 131
Sealand.......................126-131
Tank Deodorant.................. 135
Toilet Tissue....................... 135
VacuFlush...................126-129
Tools
FTZ..................................56-57
Techflex.............................. 100
Top Fittings
Transat Marine................... 183
Towel/Cloths.......................... 146
Track
Harken................................ 318
RWO.................................. 347
Transat Marine
Aluminum Tubing............... 368
Anchors.............................. 221
Carabiners.......................... 178
383
Chocks............................... 181
Cleats................................. 181
Custom Spinnaker Poles.... 368
Deck Hinges....................... 182
Fender Hangers................. 221
Motor Lifts.......................... 177
Pad Eyes............................ 182
Quick Links......................... 179
Rail Fittings........................ 183
Rings...........................180-181
Snap Shackles................... 178
Snaps..........................178-179
Stainless Wire.............278-279
Swivels........................178-179
Thimbles............................. 181
Tiller Extensions................. 340
Top Fittings......................... 183
Wire Rope Clips................. 180
Transat Stainless............178-183
Transducers
Furuno.................................. 65
Maretron............................... 82
Trapeze Gear, RWO.............. 348
Travelers
Harken.........................318-322
RWO.................................. 347
Trim Tabs........................164-165
T-Rope Eyes
ARCO................................. 249
Blue Wave...................255-256
T-Terminals
ARCO................................. 249
Blue Wave.......................... 256
Tube Clips
Beckson............................. 154
RWO.................................. 341
Tubing, Aluminum.................. 368
Turnbuckles
Blue Wave...................252-259
Johnson.......................267-272
Turning Point Props........184-188
TV Antennas............................ 96
Tylaska
Fids.................................... 369
Halyard Shackles............... 369
J-Lock Shackle................... 369
Release Shackles.............. 369
384
INDEX: Ubl - Yva
U
U-Bolts
Blue Wave.......................... 262
Wichard.............................. 373
Umbrellas, Magma................ 118
Underwater Lights
Plug Light............................. 20
Uniden
CB Radios.......................... 105
VHF Radios.................102-105
USB Chargers
Blue Sea Systems................ 26
V
Vaavud Windmeter................ 190
VacuFlush.......................126-129
Valves
Ball Valves.......................... 166
Marelon...................... 166, 168
Varnishes
Epifanes............................. 140
V-Bolts................................... 262
Vent Filters, Heads................ 134
Vented Loops........................ 168
Vents
Beckson............................. 155
Tank.................................... 168
Vessel Systems Monitor.......... 39
VHF
Antennas.........................94-95
Holders....................... 156, 171
Uniden.........................102-105
Viking Propane Tanks............ 135
Voltmeters............................... 43
Vulcan Anchors...................... 215
W
Walker Bay............................ 228
Wall Sling............................... 175
Wallet
Harken................................ 336
Water Heaters
Seaward............................. 125
Water Light
Forespar............................. 295
Waterline Designs
Blackout Curtains............... 192
Mosquito Nets.................... 192
Weather Station
Furuno.................................. 64
Maretron............................... 82
Nauticalia........................... 233
Weatherflow Windmeter........ 190
Webasto
Air Heaters......................... 136
Webbing Loops
RWO.................................. 341
Wichard.............................. 373
Well Drain.............................. 169
Western Pacific Trading
Bronze Wool....................... 151
Locking Wire...................... 151
Whipping Twine............. 195, 219
Whisker Poles................290-291
Whistles, Bosun’s.................. 235
Wichard
Boom Brake....................... 374
Carabiners.......................... 372
Chain Gripper..................... 373
Eye Bolts............................ 371
Eye Straps.................. 371, 373
Friction Rings..................... 373
Hooks..........................371-372
Jacklines............................ 374
Knives................................ 374
Mooring Hooks................... 373
Pad Eyes............................ 373
Pre-Feeder......................... 372
Safety Snap........................ 374
Shackle Keys..................... 371
Shackles......................370-371
Snap Hooks.................371-372
Snap Shackles............371-372
Snaps..........................371-373
Snatch Block...................... 373
Tethers............................... 374
U-Bolts............................... 373
Wire Rope Clip................... 371
Wi-Fi Antennas........................ 95
Winch Grease........................ 325
Winch Handles
Harken................................ 325
Holders............................... 156
Winches
Forespar/Marelon............... 295
Harken................................ 326
Winchfeeder.......................... 367
Wind Instrument
Furuno.................................. 66
Maretron............................... 82
Vaavud............................... 190
Weatherflow....................... 190
Weatherhawk..................... 191
Windlasses
Maxwell.......................205-208
Wine
Glasses.............................. 160
Opener............................... 239
Wire
Battery Cable....................... 24
Boat Cable........................... 22
Locking Wire...................... 151
Ormiston Dyform................ 278
Primary Wire........................ 24
Rope Clips.................. 180, 371
Stainless......................278-279
Transat Marine............278-279
Wire Chart.......................... 280
Wire Rope......................278-279
Wire Rope Clips
Transat............................... 180
Wichard.............................. 371
Wireless Remote System.......... 5
Wireless Steering
Intellisteer........................... 163
Wooden Boats....................... 240
Wrap Pins...................... 251, 267
Wrist Support......................... 360
Y
Y-Connectors
Marelon.............................. 168
SeaLand............................. 134
Y-Valves................................. 168
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement