Draper 121024 projector accessory

Draper 121024 projector accessory
Technical Data Sheet
VIC-12-220 Video Interface Control By Draper
USES:
The VIC-12-220 replaces the standard 220V AC single-station control switch for all
screens or shades where a 12 volt trigger circuit is turned on to lower the product,
and turned off to raise the product.
COMPATIBILITY:
The VIC-12-220 is intended as the sole control, and cannot be used with any other
control, except the optional override switch (VIC-OS).
Please Note: If VIC-12-220 is built-in, VIC-OS cannot be used.
CONTACTS:
Single-Pole, Double-Throw (Common, Normally Closed, Normally Open).
RATING:
Contacts: 240 Volts, 7 A; 30V DC, 7 A, UL recognized, CSA recognized.
Coil: 12 VDC.
Requires 100 MilliAmps input.
DESCRIPTION:
A relay with COM/NC/NO contacts, and a 12V coil, housed in a metal box.
Box measures 76 x 102 x 127 mm and has three pigtails leading from it:
a. A 229 cm black cord with white, black and white leads for attaching to a
3-pronged plug for constant 220V AC.
b. Two 56 cm wire leads (orange & brown) for switched 12V DC.
c. Four 152 mm wire leads for the motor: blue, red, white, green (up, down, neut.,
grnd).
PART NUMBER:
121055
ILLUSTRATION:
127
mm
102
mm
Brown
+
Orange
76
mm
To 12V DC
switched outlet
To 220V AC standard outlet
White—Neutral
To Motor's
white wire
Red—To
Motor's DOWN
lead (Black)
Green—Ground
Blue—To
Motor's UP
lead (Red)
®
Copyright ©2010 Draper Inc. Form VIC-12-220_TechDataSheet10 Printed in U.S.A.
Green
Black
White
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement