- No category
advertisement
PRODUCT OVERVIEW
The DPF3103 'digEQ' is a complete signal processing system available in a stand-alone 2U rack unit, or in 1U Slave units. The digEQ system may be configured as individual dual channel processors or as a multichannel network, controlled remotely. The intuitive user interface makes the digEQ system particularly appropriate to live sound use, where fast access is required, and where the system may be used by non familiar engineers. However, it is also appropriate for fixed installations, where a Slave unit can provide all the required processing in a tamper proof package, and in broadcast, recording, and post production applications.
The digEQ system combines simultaneous 24 bit equalisation and dynamics processing functions within a single product. Intuitive and easy to use, it offers dual 31 band 2/3rd Octave Graphic EQ, Parametric and Shelving EQ, with variable High and Low Pass Filters, Compressor/Limiter and Noise Gate. Optional processors include Time Delay and Real Time Analysis. The digEQ may be connected with an analogue source as standard, or fitted with a digital
I/O module for integration into digital systems. The digEQ will store complete system settings in up to 98 nameable memories. Settings may be recalled live, with no interruption of the signal, and a Compare function allows instant toggling between two settings.
The digEQ exists either as a Master unit, which can be operated as a stand-alone dual channel processor, or a Slave unit that requires external programming. Both Master and Slave units can be incorporated into a multichannel network under the control of a single Master unit, Remote Control unit, digEQ Windows software, or any external midi controller. In this way, up to 32 channels of audio processing may be controlled remotely and linked for fast program change.
MODES OF OPERATION
In Graphic mode, each of the 31 ISO centre frequencies may be accessed instantly via a dedicated frequency button, or by the data wheel. A and B channels may be varied separately or linked together for stereo operation with offsets, and pressing two frequency buttons simultaneously will allow cut and boost of a range of frequencies. A second press of the Graphic function button displays the resultant 'real curve'.
With the Parametric & Filters mode selected, highlighted buttons give direct access to the Parametric frequencies, gain and bandwidth, to the Shelving EQ frequency and gain and to the Hi-Lo filters frequency and slope.
The Dynamics button brings up the Compressor screen, and with a second push, the Noise Gate screen. The
Compressor may be configured as either Hard or Soft Knee and features variable Threshold, seven compression ratios plus LIMIT, variable Attack and Release and Make Up Gain. The Noise Gate is of the expander type and may be configured with Hard or Soft Knee with variable Threshold, six expansion ratios plus GATE, variable Attack and
Release.
The RTA button brings up the RTA menu (if the option is fitted). The RTA option is an internal plug-in module running from its own DSP and can therefore be operated without interfering with the processing of either audio channel.
Analysis is filter based to give greater accuracy at low frequencies. Analysis may be performed on internally generated Pink Noise or on Programme material, with selectable range and reference. The signal can be measured with a range of selectable time constants and may be displayed as an instantaneous or accumulated response.
The software also features compensation for different microphone responses with four storable configurations. A number of post processing functions are available including Invert, Normalise, Average and Sum.
The DELAY button brings up the Digital Delay menu (if the option is fitted). Time delay is displayed in samples, feet, metres, seconds and frames and provides up to 1.34 seconds of delay time.
A Utilities button gives access to the DigEQ's system set-up menu, allowing selection of Input or Output, Peak or VU metering, Analogue sample rate or Digital input mode, Slave address and MIDI IN and OUT channel selection.
British
Originals
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]
An SCV International Group Company
SPECIFICATIONS
SYSTEM PERFORMANCE
Frequency response: 10Hz to 20kHz
±
0.5dB
Input impedance: 10k (balanced)
Output impedance:
Max input level:
<10R (balanced)
+20dBu
Max output level:
Nominal level:
Signal to Noise ratio:
THD @ +4dBu:
+20dBu
0dBu
>95dB
<0.012%, 10Hz-15kHz
<0.04% at 20kHz
GRAPHIC EQUALISER
Centre frequencies: (Hz): 20, 25, 31.5, 40, 50, 63, 80,
100, 125, 160, 200, 250, 315, 400. 500, 630, 800, 1k,
1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k,
16k, 20k.
Bandwidth:
Gain:
2/3rd Octave
±
15dB, 0.5dB steps
PARAMETRIC EQUALISER
Number of bands: Up to 3 per channel
Frequency range:
Gain:
Bandwidth (Q):
20Hz to 20kHz with 1/18th
Octave resolution
-40dB to +15dB, 0.5dB steps
1/32 to 2 Octaves
HIGH & LOW PASS FILTERS
High Pass filter: 16Hz to 2kHz with 1/18th
Octave resolution
Low Pass filter:
Response:
160Hz to 20kHz with 1/18th
Octave resolution
2nd Order Bessel
2nd Order Butterworth
4th Order Linkwitz-Riley
SHELVING EQUALISER
LF frequency:
HF frequency:
Gain:
16Hz to 2kHz with 1/18th
Octave resolution
160Hz to 20kHz with 1/18th
Octave resolution
±
8dB, 0.5dB steps
COMPRESSOR/LIMITER
Knee type: Soft or hard knee
Threshold: 0dB to -40dB, 0.5dB steps
Ratio:
Attack time:
Release time:
1.4:1, 2:1, 3:1, 4:1, 6:1, 8:1,
16:1 and LIMIT
10
µ s to 100ms
20ms to 5s
EXPANDER/GATE
Knee type:
Threshold:
Ratio:
Attack time:
Release time:
Soft or hard knee
0dB to -80dB, 1.0dB steps
1:2, 1:3, 1:4, 1:6, 1:8, 1:16, and GATE
10
µ s to 100ms
20ms to 5s
INTERFACES
Midi:
Computer:
Digital:
POWER
Power requirement:
Voltage:
CONNECTORS
Analogue input:
Analogue output:
Digital I/O option:
Midi in/out/thru:
Computer Midi I/F in/out:
PHYSICAL
Dimensions:
Weight:
RTA option
Spectrum analysis:
Standard:
Units of display:
Display Scales:
Source:
Microphone input:
Sensitivity:
Phantom Power:
Calibration:
31 band 1/3rd octave,
EN-61260, Peak or Vu dB SPL or dBu
30dB, 60dB
External Microphone digEQ input digEQ output
Balanced female 3 pin XLR
Adjustable
+15V
4 Programmable response memories
Noise Generator:
EQ interaction:
RTA Curve memories:
Adjustable level Pink Noise
Semi automatic and automatic equalisation
50 memories
DIGITAL DELAY option
Units:
Resolution:
Range:
Seconds, Metres, Feet,
Samples, Frames (24fr/s,
25fr/s, 30fr/s, 30 Drop Frame)
0.1mS, 0.01m, 0.1ft, 1 sample
1.3ms to 1.36s
0.45m to 470m
1.5ft to 1,540ft
Temperature Compensation:
0.03 fr to 32fr.
0
∞
C - 40
∞
C (32F - 104F)
Program change & SysEx
MIDI
AES/EBU, S/P-DIF (option)
30VA
90-240VAC 50-60Hz auto switching
3 pin female XLR (pin 2 hot)
3 pin male XLR (pin 2 hot)
AES/EBU on XLR
S/PDIF on Phono (RCA)
Word Clock-in on BNC
5 pin DIN
5 pin DIN
483mm (19") W
230mm (9") D
89mm (3.5") H
4.3Kg (9.5lbs)
British
Originals
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]
An SCV International Group Company
DIMENSIONS
A U D I O
STORE
COMPARE
RECALL
ACCESS
UTILITY
GRAPHIC
PARAMETRIC
& FILTERS
DYNAMICS
RTA
GAIN
REF
FLAT
DELAY
RANGE
BYPASS
20 31.5
50 80 125 200 315 500 800 1k25 2k 3k15 5k 8k 12k5 20k
25 40 63 100 160 250 400 630 1k 1k6 2k5 4k 6k3 10k 16k
DATA
PARAMETER
PRESS TO SELECT
ENTER
PARAMETER
ESCAPE
DISPLAY
POWER
483.0
88.0
230.0
DPF 3103
No user servicable parts inside
Disconnect from mains before removing cover
WARNING: This equipment must be earthed
SERIAL NUMBER
230V 50Hz
T1A
Panel for Expansion options
Output Input
DIGITAL
S/P DIF
Out
Word Clk
In
Output
MIDI 1
Thru Input
Panel for RTA option
Output B Output A
ANALOGUE
Input B Input A
British
Originals
In keeping with our policy of continuous improvement LA Audio reserves the right to alter specifications without prior notice.
Manufactured in the UK by LA Audio, 6-24 Southgate Road, London, N1 3JJ.
Tel: +44 (0)207 923 7447, FAX: +44 (0)207 241 3644. Web: www.laaudio.co.uk. email: [email protected]
An SCV International Group Company
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement