Nemo-PREMIUM NANO-V16-QUICK GUIDE

Nemo-PREMIUM NANO-V16-QUICK GUIDE
Welcome to the world of Nemo
This is your essential guide to using your PREMIUM NANO
Main Features
Up to 1080p (Full HD)
Channels & Menu Switch Very Fast
Amazing Remote Control
Live Internet TV Service
Internal Wi-Fi Module
Very Fast Zapping
Media Player - Photos/Music/Video
1
A. What’s Included?
PREMIUM
NANO
Two Screw &
Anchor
Product
Card
HD Cable
Quick Guide
External
Sensor
Remote
Control
2
Ethernet
Cable
3x1 AV
Cable
Wi-Fi
Antenna
Power
Adapter
B. What you Need?
HD TV
PREMIUM NANO
Internet
3
C. What to Do?
Step 1. TV Connection
Connecting to TV-SET with HDTV Connector
Best Quality
Plug into power & TV
A
Plug power cable into PREMIUM NANO
B
Plug PREMIUM NANO into HDMI port of TV
Plug power adapter into wall socket*
C
Switch TV input
Select the HDMI input / source that
your PREMIUM NANO is plugged into.
AV
PC
4
HDMI
Cable
C. What to do?
Step 2. (AV) RCA Connection
(Optional)
Connecting to TV with AV Cable
(Audio / Video / Input) - Normal / Basic Quality
Video
HD
L Audio R
TV
AV
PC
1
Plug the AV cable into PREMIUM NANO
2
Plug the AV cable into TV
Select the AV iNPUT / Source in your TV Setting
that your PREMIUM NANO is plugged into
3
5
C. What to Do?
Step 3. Other Connection
Connect to External Sensor and Ethernet Cable or WiFi Antenna (optional)
Wi-Fi Antenna /
Optional
IR Digital Sensor / Optional
Set it up
Set up your PREMIUM NANO, using
your remote control.
6
Ethernet
Cable
Connect to the
Power Supply
C. What to Do?
Step 4. Connect to USB Device
Connect to USB device (optional)
USB Flash Disk or External H.D.D. or
other Media Player
7
C. What to Do?
All Rear Panel Port Connections
Wi-Fi Antenna
RJ45 Cable
External IR Digital Sensor
HD TV
AV TV
Digital Amplifier
8
Power Supply
D. Know your RCU(1)?
(RCU)
UM/AA 1.5V
UM/AA 1.5V
RCU
9
D. Know your RCU(2-1)?
Switched Between Operations and Standby Modes
Mute Audio to Zero with one button press
Home
Displays the HOME Menu
Exit
Exit All On-Screen Display (OSD) Screens
Apps
Goes to Built-In APPS Page
Settings
Control Device System Settings
Ch
Ch
Change the Channels or Pages
Vol
Change the Audio Volume
Vol
Select
To confirm the selection
IPTV
Internet TV (Live TV)
Music
Play Online Music
Vod
Radio
YouTube
To Display the Video on Demand
Internet Radio Station
To Enter to YouTube Video App
10
D. Know your RCU(2-2)?
Recall
Returns to The Previous Channel or The Previous Screen
Info
Displays the Channel Information and other Information’s
Fav
To show the favorite movies and channels list
Add Fav
To add and delete favorite elements from the Fav list
Option
To Select the preferred language on IPTV and Movies
Find
RW
Find the Movies and Channels by entering the name
FW
Fast Backward or Forward the Playing Movies
VOL
Change the Audio Volume
Page
Change the Channels or Pages
Play
VOL
Page
Play and pause the Music and Movies
0~9
REC
/ Stop
Enter number of the required menu or
select a channel number to watch
Record the IPTV Channels and Stop the Music and Movies
11
E. How to Connect
Internet Through RJ45?
• Connect the RJ45 Cable Socket into Ethernet Port in rear panel.
• Go to Menu – Settings – Network Setting – Device.
• Press left / right to change the setting into WIRED.
• Navigate to SAVE and Press OK to save the settings
• Wait few seconds to active the internet service on your device.
• You can check the internet activate through system O’clock will
Be updated once internet service valid on the device.
12
F. How to Connect
Internet Through Wi-Fi?
• Make sure you fixed the external antenna into
Wi-Fi Port.
• Go to Menu – Settings – Network Setting – Device.
• Press left / right to change the setting into Wi-Fi.
• Press GREEN button to show available networks
\in the range.
• Wait few seconds to finish scanning for Wi-Fi Network list.
• The device support 2.4 GHz Wi-Fi Networks.
• Press OK on your network and enter the password
of the network. Through the Keyboard will pop up on
screen, Press SAVE to connect.
• Wait Few Seconds till show the correct Sign near
Wi-Fi network name. Also (CONNECT OK!) will
show on top right side of network list page.
• You can check the internet activate through system
O’clock will be updated once internet service valid
on the device.
13
G. How to Update
Through (Internet)
Online Update?
• Make Sure your PREMIUM NANO connected to active internet service.
• Go to Menu – Settings – System Information.
• Press OK on Internet S/W Update.
• Wait few seconds to connect into FTP Update Server to check if there’s new
software version than current software version.
• Update information message will display Current Version / Latest Version
Press OK if you like to update into newer S/W version (IF Available).
• Very Important
The Electricity Power Must Not Power OFF During Update Process.
14
H. How to Update
by USB Disk?
3
1
2
• Add the software update file to (Foematted) USB Flash Disk
• Go to Menu – Settings – Software Upgrade
• Upgrade Type <USB Upgrade>, Section <All>, File Path <Select the
upgrade file from USB Disk>.
• Start <Press OK> to start Upgrade Process
• Very Important
The Electricity Power Must Not Power OFF During Update Process.
15
I. How to Active Your
PREMIUM NANO Service?
• Make sure you connected into active internet service.
• Go to Menu – Settings – Account Setting – Press OK.
• Select (Start Login) then press OK to start active the service and wait
few seconds to active and register your device on our server.
• The service will work for 90 days from first active of the account.
• After service activated the (Login Successful!) will show on the top.
• To renew the service after expired please contact us by email
support@x2sat.com
16
J. How to Renew the
Internet TV Service?
1. Press Menu Button on the Remote Control: Menu Settings Account
2. Send the USER ID content 7 Digits to us by email (support@nemoiptv.com)
3. Pay the Renewal Service Fee (After the Account Expired)
4. Enter you new service code content 10 Digits on USER CODE and navigate
to START LOGIN and press OK for start active the New Code
5. Once you enter correct USER ID, it will show the details, Validity Time and Period Time
Of the Service also LOGIN SUCCESSFUL! will show on the top of the account page
6. Make Sure your OTT is connected Online (By WiFi or LAN)
0000000000
2XXX/MM/DD--2XXX/MM/DD
17
K. Troubleshooting
Problem
Solution
poor picture quality
See “No Picture” below.
No Picture
See “Does not display any meessage on the front panel” below.
To match the OTT system with your TV system (PAL/NTSC),
Press TV Format "DISPLAY" Button until a picture is displayed.
Check the video output port is firmly connected to the TV or VCR.
Check that you have selected the video Input on your TV.
Check the brightness level of the TV.
Check the resolution that your TV supports, and set the proper
resolution with the remote Resolution button
to obtain a picture.
Does not display any
message on the front panel
Check the main power cable and check that it is plugged into a
suitable power outlet.
No Sound
See “No Picture” above.
Check the volume level of the TV and OTT.
Check the Mute status of the TV and OTT.
Remote control does
not operate
Point remote control directly towards the OTT.
Check that the OTT button lights up when you press any button.
Check and replace batteries.
18
L. Easy & Quick Installation
Now, your Premium Nano is ready for your use!
19
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising