Massive Audio E2 Massive Audio

Add to my manuals
20 Pages

advertisement

Massive Audio E2 Massive Audio | Manualzz

Nano Edge Amplifier

E 2 / 3 / 4

EX 2 / EX 5

EX 44 / EX 46 / EX 48

1

INTRODUCTION

Congratulations!

And thank you for purchasing a "Massive Audio" Nano Edge amplifier for your car audio system. You now own an amplifier of uncompromising design and engineering incorporating the latest advances in micro topology. This handcrafted amplifier is designed to deliver the demands of serious sound competitors. You will soon discover that "Nano Edge" amplifiers display a fine balance between high quality, performance and reliability; all proven qualities of

"Massive Audio" products.

"Massive Audio" amplifiers are the result of American Craftsmanship using only the highest quality components and quality control standards.

In order to provide you with many years of listening pleasure, we recommend you to have your new amplifier installed by an Authorized

"Massive Audio Dealer." This will ensure the proper installation of your product, and will also increase the length of your warranty to ONE

YEAR.

(Please see the warranty section of this manual for more details.)

Please take a moment to thoroughly read this manual to ensure that you get the maximum benefit from this new addition to your car audio system. When installed properly, this unit will provide years of troublefree performance.

Should your amplifier ever need service or replacement due to theft, please record the following information, which will help protect your investment.

Model #: _______________________________________

Dealer's Name: ___________________________________

Date of Purchase: ___________________________________

Installation Shop and Date:__________________________

Design Features

Extreme power in a small footprint

1 Ohm stable design (Mono Amps)

Mil Spec double sided PCB design with SMD parts

Built-in noise reduction circuitry

Full MOSFET with high grade switching devices

MCU Power Management (EX46/EX48)

Regulated power supply circuit and dual output voltage (EX46/EX48)

Built-in auto sensing Turn On function (Hi-Inputs)

12V Remote Output for external devices (Hi-Inputs)

0~12dB variable Bass boost (Except EX2)

Next generation advanced 5 way protection circuitry

World Wide standards compliant.

(RoHS,E-mark,CEA-2006,CE)

2

1

INTRODUCTION

Congratulations!

And thank you for purchasing a "Massive Audio" Nano Edge amplifier for your car audio system. You now own an amplifier of uncompromising design and engineering incorporating the latest advances in micro topology. This handcrafted amplifier is designed to deliver the demands of serious sound competitors. You will soon discover that "Nano Edge" amplifiers display a fine balance between high quality, performance and reliability; all proven qualities of

"Massive Audio" products.

"Massive Audio" amplifiers are the result of American Craftsmanship using only the highest quality components and quality control standards.

In order to provide you with many years of listening pleasure, we recommend you to have your new amplifier installed by an Authorized

"Massive Audio Dealer." This will ensure the proper installation of your product, and will also increase the length of your warranty to ONE

YEAR.

(Please see the warranty section of this manual for more details.)

Please take a moment to thoroughly read this manual to ensure that you get the maximum benefit from this new addition to your car audio system. When installed properly, this unit will provide years of troublefree performance.

Should your amplifier ever need service or replacement due to theft, please record the following information, which will help protect your investment.

Model #: _______________________________________

Dealer's Name: ___________________________________

Date of Purchase: ___________________________________

Installation Shop and Date:__________________________

Design Features

Extreme power in a small footprint

1 Ohm stable design (Mono Amps)

Mil Spec double sided PCB design with SMD parts

Built-in noise reduction circuitry

Full MOSFET with high grade switching devices

MCU Power Management (EX46/EX48)

Regulated power supply circuit and dual output voltage (EX46/EX48)

Built-in auto sensing Turn On function (Hi-Inputs)

12V Remote Output for external devices (Hi-Inputs)

0~12dB variable Bass boost (Except EX2)

Next generation advanced 5 way protection circuitry

World Wide standards compliant.

(RoHS,E-mark,CEA-2006,CE)

2

Amplifier Functions

1. Speakers

Connect speakers/subwoofers to these terminals. Be sure to check wire for proper polarity. never connect the speaker cables to chassis ground.

2. +12 Volt Power

Connect this terminal through a fuse or circuit breaker to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery.

3. Auto sensing Turn On Function / REM OUT(HI-INPUTS)

When use HI-INPUT, the amp can detect the DC OFFSET from the high level input signal to auto turn on/off. When the amp turns on, the REM terminal will output

+12V DC to control the other device turn on/off.

REM IN: When use Low level input, the Amp REM IN should be connected to the

REM OUT of the Source Unit. The head unit controls the amp turn on/off.

4. GND

Connect this cable directly to the frame of the vehicle. make sure the metal frame has been stripped of all paint down to the bare metal.

Use the shortest distance possible. It is always a good idea to replace the factory ground at this time with a larger cable equal to the new directly to the vehicle battery ground terminal or any other factory ground points.

5. RCA INPUT / AUTO HI-LOW LINE CONVERTOR

These RCA input jacks connect with your source unit RCA Low Level outputs or via optional adapter with your source unit speaker high level outputs. The use of High quality twisted pair car audio cables is recommended to mind possibility of disturbance the audio signal.

6. Remote(Mono Blocks)

Connect the remote controller to control the subwoofer amplifier volume from the driver seat location, For ease of adjustment during playing.

7. Gain Control

The Gain control will match the amplifiers sensitivity to the source units signal voltage. The Operating range is 10V to 400mV. This is NOT a volume control!

8.Low Pass Filter Control(Mono block)

This control is used to select the desired low pass x-over frequency. The frequency can be adjusted from 6OHz to 220Hz for all bass mono models.

9. Subsonic Filter Control(Mono block)

This control can filted out unwanted low frequency from OHz(off) to 60Hz.

This function will increase the power handling of your woofers.

10.Bass Boost Level knob(Mono block)

This control adjust the boost level of the bassboost center frequency. It can be adjusted from 0 to 12dB. Combining with bassbootst frequency, You can accurately match the amplifier performance to woofer response.

11.Bass Boost FREQ knob(Mono block)

This control the boosted center frequency. The frequency can be adjusted from 30Hz to 120Hz according to your car audio system performance. (Eg. When you adjust this knob to 50Hz, Amplifier will boost the frequency around 50Hz.)

This function should be adjusted combining with bassboost level tuning.

12. X-over mode (full range)

This switch works together with the FREQ to adjust the operating frequency range of the amp. When switch to LPF or HPF, The corresponding filter can adjust the operating frequency range between 10Hz to 300Hz ( or 100Hz to 3KHz) .When pushing the subwoofer, Please switch to LPF mode; When pushing small caliber full frequency speaker, Middle and high frequency loudspeaker, Please switch to HPF mode. When

3 pushing large caliber full frequency speaker, please switch to FULL mode. When switch to FULL mode, The filters will not function.

If EX44/EX46/EX48 rear sound field need to choose FULL mode, The X-over should switch to HPF status, FREQ should adjust reversely to 10Hz and the X1/X10 switch should be at X1.

WARNING: Use buttons and HPF knob correctly to prevent low frequency damage to tweeters.

13. Frequency Control (full range)

This switch works together with X-over X1 / X10 For High Pass Frequency

Crossover, When this button is set at the “X10” position the HPF range adjustments are 100Hz ~ 3KHz. When this button in set at the “X1” the HPF range is from 10Hz ~ 300Hz.

WARNING: Use buttons and HPF knob correctly to prevent low frequency damage to tweeters.

X1 / X10 Low Pass Frequency Crossover, When this button is set to the “X10” position the LPF range adjustments are 10Hz ~300Hz. When this button is set to

“X1” the LPF range is from 100Hz~3KHz.

14. 2/4 Ohm Switch (Ex46 / EX48)

This amp has regulated power supply circuit to offer dual output power. When use 2ohm/4ohm BTL speaker output, please choose 2ohm option. When use 4ohm speaker output, please choose 4ohm option.

PANEL LAYOUT

Fig 1. Mono amplifier panel l ayout

17 18

E2/E3/E4

E2

E3/E4

4

Amplifier Functions

1. Speakers

Connect speakers/subwoofers to these terminals. Be sure to check wire for proper polarity. never connect the speaker cables to chassis ground.

2. +12 Volt Power

Connect this terminal through a fuse or circuit breaker to the positive terminal of the vehicle battery or the positive terminal of an isolated audio system battery.

3. Auto sensing Turn On Function / REM OUT(HI-INPUTS)

When use HI-INPUT, the amp can detect the DC OFFSET from the high level input signal to auto turn on/off. When the amp turns on, the REM terminal will output

+12V DC to control the other device turn on/off.

REM IN: When use Low level input, the Amp REM IN should be connected to the

REM OUT of the Source Unit. The head unit controls the amp turn on/off.

4. GND

Connect this cable directly to the frame of the vehicle. make sure the metal frame has been stripped of all paint down to the bare metal.

Use the shortest distance possible. It is always a good idea to replace the factory ground at this time with a larger cable equal to the new directly to the vehicle battery ground terminal or any other factory ground points.

5. RCA INPUT / AUTO HI-LOW LINE CONVERTOR

These RCA input jacks connect with your source unit RCA Low Level outputs or via optional adapter with your source unit speaker high level outputs. The use of High quality twisted pair car audio cables is recommended to mind possibility of disturbance the audio signal.

6. Remote(Mono Blocks)

Connect the remote controller to control the subwoofer amplifier volume from the driver seat location, For ease of adjustment during playing.

7. Gain Control

The Gain control will match the amplifiers sensitivity to the source units signal voltage. The Operating range is 10V to 400mV. This is NOT a volume control!

8.Low Pass Filter Control(Mono block)

This control is used to select the desired low pass x-over frequency. The frequency can be adjusted from 6OHz to 220Hz for all bass mono models.

9. Subsonic Filter Control(Mono block)

This control can filted out unwanted low frequency from OHz(off) to 60Hz.

This function will increase the power handling of your woofers.

10.Bass Boost Level knob(Mono block)

This control adjust the boost level of the bassboost center frequency. It can be adjusted from 0 to 12dB. Combining with bassbootst frequency, You can accurately match the amplifier performance to woofer response.

11.Bass Boost FREQ knob(Mono block)

This control the boosted center frequency. The frequency can be adjusted from 30Hz to 120Hz according to your car audio system performance. (Eg. When you adjust this knob to 50Hz, Amplifier will boost the frequency around 50Hz.)

This function should be adjusted combining with bassboost level tuning.

12. X-over mode (full range)

This switch works together with the FREQ to adjust the operating frequency range of the amp. When switch to LPF or HPF, The corresponding filter can adjust the operating frequency range between 10Hz to 300Hz ( or 100Hz to 3KHz) .When pushing the subwoofer, Please switch to LPF mode; When pushing small caliber full frequency speaker, Middle and high frequency loudspeaker, Please switch to HPF mode. When

3 pushing large caliber full frequency speaker, please switch to FULL mode. When switch to FULL mode, The filters will not function.

If EX44/EX46/EX48 rear sound field need to choose FULL mode, The X-over should switch to HPF status, FREQ should adjust reversely to 10Hz and the X1/X10 switch should be at X1.

WARNING: Use buttons and HPF knob correctly to prevent low frequency damage to tweeters.

13. Frequency Control (full range)

This switch works together with X-over X1 / X10 For High Pass Frequency

Crossover, When this button is set at the “X10” position the HPF range adjustments are 100Hz ~ 3KHz. When this button in set at the “X1” the HPF range is from 10Hz ~ 300Hz.

WARNING: Use buttons and HPF knob correctly to prevent low frequency damage to tweeters.

X1 / X10 Low Pass Frequency Crossover, When this button is set to the “X10” position the LPF range adjustments are 10Hz ~300Hz. When this button is set to

“X1” the LPF range is from 100Hz~3KHz.

14. 2/4 Ohm Switch (Ex46 / EX48)

This amp has regulated power supply circuit to offer dual output power. When use 2ohm/4ohm BTL speaker output, please choose 2ohm option. When use 4ohm speaker output, please choose 4ohm option.

PANEL LAYOUT

Fig 1. Mono amplifier panel l ayout

17 18

E2/E3/E4

E2

E3/E4

4

5

15. EXTERNAL CAPACITOR INPUT

For connecting an optional (sold separately) external hi-voltage capacitor. This will help stabilizing the amplifiers needed voltage during operation while improving fidelity and maximizing head room.

16. Woofer channel signal selector(EX5)

The button select the signal source for subwoofer channel .When the button is up, Subwoofer signal switched to the subwoofer channel’s RCA input jack. When the button is down, It mix up 4x full freqencny channel’s bass signal and pass to subwoofer channel.

17. Power Indicator

This LED will light up when amplifier works properly.

18. Protection Indicator

This red LED will light up and will be flashing if there is a fault presented to the amplifier. Please disconnect the amplifier and resolve the fault before reconnecting the amplifier.

PANEL LAYOUT

Fig 2. 4-ch amplifier panel l ayout

17

18

PANEL LAYOUT

Fig 3. 2-ch amplifier panel l ayout

18 17

PANEL LAYOUT

Fig 4. 5-ch amplifier panel l ayout

18 17

EX44/EX46/EX48

Ex44

EX46/EX48

16

6

5

15. EXTERNAL CAPACITOR INPUT

For connecting an optional (sold separately) external hi-voltage capacitor. This will help stabilizing the amplifiers needed voltage during operation while improving fidelity and maximizing head room.

16. Woofer channel signal selector(EX5)

The button select the signal source for subwoofer channel .When the button is up, Subwoofer signal switched to the subwoofer channel’s RCA input jack. When the button is down, It mix up 4x full freqencny channel’s bass signal and pass to subwoofer channel.

17. Power Indicator

This LED will light up when amplifier works properly.

18. Protection Indicator

This red LED will light up and will be flashing if there is a fault presented to the amplifier. Please disconnect the amplifier and resolve the fault before reconnecting the amplifier.

PANEL LAYOUT

Fig 2. 4-ch amplifier panel l ayout

17

18

PANEL LAYOUT

Fig 3. 2-ch amplifier panel l ayout

18 17

PANEL LAYOUT

Fig 4. 5-ch amplifier panel l ayout

18 17

EX44/EX46/EX48

Ex44

EX46/EX48

16

6

7

Wiring Diagram

Fig 4. Mono amplifier wiring

(SINGLE WOOFER LOAD)

E3 / E4

Wiring Diagram

Fig 5. Mono amplifier wiring

(Multi-woofer load)

E2

Nano Edge

8

7

Wiring Diagram

Fig 4. Mono amplifier wiring

(SINGLE WOOFER LOAD)

E3 / E4

Wiring Diagram

Fig 5. Mono amplifier wiring

(Multi-woofer load)

E2

Nano Edge

8

9

Wiring Diagram

Fig 6. Ex2 AMPLIFIER WIRING

(1-CHANNEL MODE)

Wiring Diagram

Fig 7. Ex2 AMPLIFIER WIRING

(2-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

10

9

Wiring Diagram

Fig 6. Ex2 AMPLIFIER WIRING

(1-CHANNEL MODE)

Wiring Diagram

Fig 7. Ex2 AMPLIFIER WIRING

(2-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

10

Wiring Diagram

Fig 8. Ex44 / Ex46 / Ex48 AMPLIFIER WIRING

(3-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

EX46/EX48

In 2ohm state

Wiring Diagram

Fig 9. Ex44 / Ex46 / Ex48 AMPLIFIER WIRING

(4-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

2OHM-4OHM 2OHM-4OHM

SPEAKER Signals

SPEAKER Signals

Explain: EX46/ EX48 has regulated power supply circuit to offer dual output power. When use 2ohm/4ohm BTL speaker output, please choose 2ohm option.

When use 4ohm speaker output, please choose 4ohm option.

12 11

Wiring Diagram

Fig 8. Ex44 / Ex46 / Ex48 AMPLIFIER WIRING

(3-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

EX46/EX48

In 2ohm state

Wiring Diagram

Fig 9. Ex44 / Ex46 / Ex48 AMPLIFIER WIRING

(4-CHANNEL MODE)

2OHM-4OHM 2OHM-4OHM

2OHM-4OHM 2OHM-4OHM

SPEAKER Signals

SPEAKER Signals

Explain: EX46/ EX48 has regulated power supply circuit to offer dual output power. When use 2ohm/4ohm BTL speaker output, please choose 2ohm option.

When use 4ohm speaker output, please choose 4ohm option.

12 11

Wiring Diagram

Fig 10. EX5 AMPLIFIER WIRING

(5-CHANNEL MODE)

2OHM-8OHM 2OHM-8OHM 1OHM Minimum

2OHM-8OHM 2OHM-8OHM

Wiring Diagram

Fig 11. EX5 AMPLIFIER WIRING

(3-CHANNEL MODE)

4OHM-8OHM

1OHM Minimum

4OHM-8OHM

13 14

Wiring Diagram

Fig 10. EX5 AMPLIFIER WIRING

(5-CHANNEL MODE)

2OHM-8OHM 2OHM-8OHM 1OHM Minimum

2OHM-8OHM 2OHM-8OHM

Wiring Diagram

Fig 11. EX5 AMPLIFIER WIRING

(3-CHANNEL MODE)

4OHM-8OHM

1OHM Minimum

4OHM-8OHM

13 14

Trouble Shooting Specifications

1600W

MAX

Mono

2800W

MAX

Mono

4000W

MAX

Mono

1x480W

MAX

2x400W

MAX

2x600W

MAX

2x800W

MAX

EX5

2x480W

+ 1600W MAX

N/A N/A N/A

4x150W

4x150W

2x600W

N/A

4x200W

4x200W

2x800W

N/A+800W

4x240W+400W

4x120W+200W

2x480W+200W

N/A N/A N/A

THD at 4Ohm load

30% Rated Power

BassBoost LEVEL

BassBoost FREQ.

N/A

N/A

20Hz~25KHz

60Hz~220Hz

10Hz~60Hz

>89dB

0~12dB

(Woofer Channel)

>63% 4Ch / woofer channel >82%

N/A

ShortCircuit Test

@ max power

RECOMMENDED

EXTERNAL FUSE

Overheat protect temperature

Components

& PCB

60A 120A 200A 40A 40A 60A 80A 100A

15"

15 16

Trouble Shooting Specifications

1600W

MAX

Mono

2800W

MAX

Mono

4000W

MAX

Mono

1x480W

MAX

2x400W

MAX

2x600W

MAX

2x800W

MAX

EX5

2x480W

+ 1600W MAX

N/A N/A N/A

4x150W

4x150W

2x600W

N/A

4x200W

4x200W

2x800W

N/A+800W

4x240W+400W

4x120W+200W

2x480W+200W

N/A N/A N/A

THD at 4Ohm load

30% Rated Power

BassBoost LEVEL

BassBoost FREQ.

N/A

N/A

20Hz~25KHz

60Hz~220Hz

10Hz~60Hz

>89dB

0~12dB

(Woofer Channel)

>63% 4Ch / woofer channel >82%

N/A

ShortCircuit Test

@ max power

RECOMMENDED

EXTERNAL FUSE

Overheat protect temperature

Components

& PCB

60A 120A 200A 40A 40A 60A 80A 100A

15"

15 16

17

WARRANTY

 Massive Audio, Inc. warrants all manufactured amplifier products to be free from defect in material and workmanship for a period not to exceed ONE YEAR* from the date of original purchase when installed by an authorized “Massive

Audio” dealer. Units that are not installed by an authorized

“Massive Audio” dealer maintain a warranty not to exceed 90 days from the original purchase date by the original purchaser.

Pr

O ducts that display abuse such as power deficiency, over driving the amplifier or clipping the input require purchase of a new PCB for replacement.

“Massive Audio” obligations under this warranty are limited to repairing or replacing, at its own sole option, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in anyway.

This warranty applies only to the original purchaser who must have properly registered the product within 30 days of purchase.

Except as provided herein, Massive Audio, Inc. makes no warranties or representations, express or implied, including any warranty implied by law, whether for merchantability or fitness for a particular purpose and shall be effective only for the period that this express warranty is effective. SEE THE WARRANTY REGISTRATION CARD TO

ADDITIONAL INFORMATION.

18

17

WARRANTY

 Massive Audio, Inc. warrants all manufactured amplifier products to be free from defect in material and workmanship for a period not to exceed ONE YEAR* from the date of original purchase when installed by an authorized “Massive

Audio” dealer. Units that are not installed by an authorized

“Massive Audio” dealer maintain a warranty not to exceed 90 days from the original purchase date by the original purchaser.

Pr

O ducts that display abuse such as power deficiency, over driving the amplifier or clipping the input require purchase of a new PCB for replacement.

“Massive Audio” obligations under this warranty are limited to repairing or replacing, at its own sole option, any such defective products. This warranty does not apply to equipment that has been damaged by accident, negligence, or misapplication or has been altered or modified in anyway.

This warranty applies only to the original purchaser who must have properly registered the product within 30 days of purchase.

Except as provided herein, Massive Audio, Inc. makes no warranties or representations, express or implied, including any warranty implied by law, whether for merchantability or fitness for a particular purpose and shall be effective only for the period that this express warranty is effective. SEE THE WARRANTY REGISTRATION CARD TO

ADDITIONAL INFORMATION.

18

2016

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement