USPs • Designed for panel mounting • Choice of International AC

USPs • Designed for panel mounting • Choice of International AC
pip
PIP, as the name suggests has been designed
to provide convenient AC power and USB ‘fastcharging’ in its purest and simplest form.
PIP presents a single OE Electrics mains AC or
USB charging socket (TUF) in a wide choice of
decorative bezels, with style, colour and finish
option to perfectly complement your interior design
theme.
Designed specifically for panel mounting in furniture,
PIP fits into a standard 60mm cable grommet
opening and requires only 44mm depth. Integrated
fixings enable quick installation in most surfaces
from 0.9mm to 30mm thick, including panels with
limited rear access.
PIP is supplied as a prewired unit with hardwired
power cable to national mains plug or GST18
connector, ready for installation. Two or more PIP
units can be interlinked to provide combinations of
AC power and USB fast charging as is needed by
the user.
USPs
• Designed for panel mounting
• Choice of International AC
sockets types
• TUF5A and TUF-R5A USB
charger options*
• Wide range of colour and finish
options
• Integrated fixing clips/clamps
• Supplied pre-wired to mains
plug or GST18
*TUF-R is replaceable/upgradable
OE House, Thomas Maddison Lane
Calder Park, Wakefield, WF4 3GH
Tel: +44 (0) 1924 367255 Fax: +44 (0) 1924 290652
Email: sales@oeelectrics.co.uk www.oeelectrics.com
London
-
Dubai
-
Sydney
OE Electrics Pip MAY 2017 | 1
technical
Common Modular Components
Features
Configuration
Single OE 42mm type AC power socket, or
OE “TUF” USB charging socket
UK fused
UK unfused
Schuko
French/Belgian
Australian
Chinese
Danish
TUF-R
Swiss
Italian
Nema
Switch
Unit Dimensions
Integral Fixings
Panel mount clips for surfaces 0.9mm - 3mm thick
Screw clamps for surfaces 0.9mm - 30mm thick
Colours
Socket fascias - Black, Grey, or White (UK AC & TUF
only)
Body and back mouldings - Black
Bezel - Black, grey or white mouldings with optional
satin painted finishes and decorative inlays
44mm
5.6mm
ø74mm
Construction
Body and back - Nylon
Socket fascia - Polycarbonate
Bezel
- ABS with optional metal inlay
Earth Bonding
PIP units with AC power sockets can be ordered with an
optional external lead for earth bonding metal furniture.
ø74mm
ø60mm
Quality &Testing
All PIP units are manufactured using ISO9001 quality
controlled components and practices and are 100%
tested before dispatch.
Cutout dimensions
PIP can be installed into a preexisting industry standard ø60mm
cutout, or hole can be drilled into
surfaces using an appropriate hole
saw.
ø60mm-0
MAX 30mm
• Visual: Configuration and appearance.
• Power sockets: Continuity, polarity, insulation & earth
• USB charger: Output voltage and resistance
Power cord options
PIP may be ordered with
•
•
•
Maximum panel thickness
0.9mm - 3mm
Fusing
To enable compliance to BS6396 UK sockets are fitted
with 5 x 20mm anti-surge ceramic fuses, with colourcoded fuse clips to denote the rating (3.15A/5A)
15mm MAX DEPTH
CE marking
All units built with UK and European socket types are CE
marked by OE Electrics as complying with:
•
•
•
Snap-in fixing
Clamp fixing
Side exit cable fixing
Hardwired power cord to AC plug, or
Hardwired power cord to GST18-3, or
Hardwired power cord to OE J coupler
Electromagnetic Compatibility Directive 2014/30/EU
Low Voltage Equipment Directive 2014/35/EU
RoHS2 Directive 2011/65/EU
Certifications
PIP has been designed and is manufactured to comply
with applicable national/international safety and EMC
standards for the country of intended use, utilising fully
certified components.
OE House, Thomas Maddison Lane
Calder Park, Wakefield, WF4 3GH
Tel: +44 (0) 1924 367255 Fax: +44 (0) 1924 290652
Email: sales@oeelectrics.co.uk www.oeelectrics.com
London
-
Dubai
-
Sydney
OE Electrics Pip MAY 2017 | 2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising