Gamber-Johnson 7170-0138 mounting kit

Gamber-Johnson 7170-0138 mounting kit
Vehicle Solution Package:
Dodge Charger Police Package
(2011-2013)
Pedestal System
Rugged Docking Stations and Vehicle Mounts
Solution Components:
1. Vehicle Base
(Item No. 7160-0329)
Vehicle Base is a no-drill solution and
attaches to the passenger side seat
studs. Designed using heavy gauge
steel for long-term durability.
4
2. Lower Tube
(Item No. DS-LOWER-13)
The Lower Tube provides vertical
clearance over the center console or
the seat.
3
5
2
1
Item No. 7170-0138
Must order package as is. There are no substitutions.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
Website: www.gamberjohnson.com
3. Upper Pole
(Item No. 7160-0178)
Center Upper Pole allows for closer
mounting to the dash and less stress
on the vehicle mounting equipment
as gravity is centered on the pole.
Wrench is needed for loosening,
tightening or height adjustment.
4. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around
360° with locking points every 15°.
Slide Arm can extend out from 9”
to 13” from center pole and locks
automatically in the retracted 9”
position. Motion Attachment has tilt
capabilities up to 90° forward/30°
back and can be swiveled up to 360°.
5. Support Brace
(Item No. 7160-0230)
Support Brace provides additional
mount system support in rugged
driving conditions and increases
mounting system rigidity.
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2011 Gamber-Johnson, LLC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement