Gamber-Johnson 7170-0144 mounting kit

Gamber-Johnson 7170-0144 mounting kit
Vehicle Solution Package:
Chevrolet Impala (2006-2013)
Pedestal System
Rugged Docking Stations and Vehicle Mounts
Solution Components:
1. Vehicle Base
(Item No. 7160-0055)
Vehicle Base is a no-drill solution
and attaches to the passenger side
seat studs. Designed using heavy
gauge steel for long-term durability.
Vehicle Base works with both the
Police Package and the Street Model.
Item No. 7170-0144
Must order package as is. There are no substitutions.
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: [email protected]
2. Lower Tube
(Item No. DS-LOWER-7)
The Lower Tube provides vertical
clearance over the center console or
the seat.
3. Upper Pole
(Item No. 7160-0177)
Center Upper Pole allows for closer
mounting to the dash and less stress
on the vehicle mounting equipment
as weight is centered on the pole.
Wrench is needed for loosening,
tightening or height adjustment.
4. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around
360° with locking points every 15°.
Slide Arm can extend out from 9”
to 13” from center pole and locks
automatically in the retracted 9”
position. Motion Attachment has tilt
capabilities up to 90° forward/30°
back and can be swiveled up to 360°.
5. Support Brace
(Item No. 7160-0230)
Support Brace provides additional
mount system support in rugged
driving conditions and increases
mounting system rigidity.
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF