products - Pentair Aquatic Eco
WATER QUALITY
PRODUCTS
234 Dissolved Oxygen Meters
241 ORP Meters
242 Total Dissolved Gas Pressure (TPG) Meters/
CO2 Meter
246 pH Meters
248 Conductivity Meters
250 Salinity Refractometers & Meters
252 Multiparameter Meters
260 Photometers
261 Colorimeter
262 Analytical AquaLab
263 Analytical Mini-Analyzer
264 UVT Meter
265 Turbidity Meters
266 Calibration Solutions
268 Test Kits/Test Strips
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 233
Tech Talk
TECH TALK 47
Water Quality Guide
Percentage of Un-Ionized Ammonia at Different pH Values and Temperature
These are healthy growing tolerances, not limits for fatalities. Use this chart for guidelines only.
Tolerance levels can vary greatly depending on a variety of factors. Some species are also sensitive
to nitrite above 40 ppm. Fish will excrete about 14 grams of ammonia for each lb of food eaten
(@ 35% protein). Test kits read total ammonia; this guide gives un-ionized ammonia levels.
See chart for conversion.
Trout
Hybrid Striped Bass
Tilapia
Goldfish/Koi
Shrimp (Freshwater)
Shrimp (Saltwater)
Minnows Shiners
Tropical Fish (Freshwater)
PH
16ºC/61ºF
20ºC/68ºF
24ºC/75ºF
28ºC/82ºF
32ºC/90ºF
7.0
1%
1%
1%
1%
1%
7.4
1%
1%
1%
2%
2%
7.8
2%
2%
3%
4%
6%
8.2
5%
6%
8%
10%
13%
8.6
11%
14%
17%
22%
28%
9.0
23%
28%
34%
41%
49%
Equation: ppm un-ionized ammonia = ppm total ammonia (measured) x un-ionized ammonia (from
above). These figures are percentages, so remember to move the decimal point two spaces to the
left for the equation.
TEMP
D.O.
MG/L
PH
UNITS
ALKALINITY
MG/L
CO₂
MG/L
UN-IONIZED
AMMONIA
MG/L
NITRITE
MG/L
HARDNESS
MG/L
CHLORIDE
MG/L
SALINITY
PPT
45–68°F/7–20°C
70–85°F/21–29°C
75–90°F/24–32°C
65–75°F/18–24°C
68–80°F/20–27°C
60–75°F/16–24°C
60–75°F/16–24°C
72–84°F/22–29°C
5–12
4–10
3–10
4–10
4–10
4–10
4–10
4–10
5.5–8
6–8
6–8
6–8
6.5–9
6–8.5
6–8
6–8
50–250
50–250
50–250
50–250
60–100
50–250
50–250
50–250
0–20
0–25
0–30
0–25
0–20
0–15
0–25
0–20
0–0.02
0–0.03
0–0.04
0–0.08
0–0.05
0–0.01
0–0.03
0–0.03
0–0.2
0–0.8
0–0.8
0–0.6
0–0.9
0–0.1
0–0.6
0–0.9
50–350
50–350
50–350
50–350
60–250
50–350
50–350
50–350
0–1,500
0–1,500
0–5,000
0–2,000
0–1,500
13,000–18,000
0–2,500
0–2,500
0–3
0–3
0–15
0–4
0–3
2–35
0–5
0–5
Marine Reef Water Quality Guide
Freshwater Plant Water Quality Guide
Use these numbers for guidelines only, not for water quality limits. These are healthy growing
tolerances. Tolerance levels can vary greatly depending upon a variety of factors.
Temperature: 72–78°F
Nitrate: <1.0 ppm
Redox: 350–400mV
Phosphate: <0.1 ppm
Salinity: 22–35 ppt
Strontium: 8–10 pp
pH: 8.2
Alkalinity: 125–160 mg/L**
Redox Calcium: 350*–500 ppm
Iodine*: 0.06 ppm
Dissolved Oxygen: 5–7 ppm
Silicate*: <2.0 ppm
Boron*: 4.5–4.8 ppm
Ammonia: 0 ppm
Recommended light levels: 4–6 watts/gallon in a 1:1 ratio of actinic blue to daylight.
*Level found in natural seawater. **Calcium carbonate (CaCO₃).
Use these numbers for guidelines only, not for water quality limits. These are healthy growing
tolerances. Tolerance levels can vary greatly depending upon a variety of factors.
Temperature: 74–79°F
Iron: 0 to 1.0 mg/L
pH: 6.8
Phosphate: 0 to 5.0 mg/L
Dissolved Oxygen: 5–7 ppm
Trace Elements: 0 to .5 mg/L
Nitrate: <40 mg/L
Carbonate Hardness (KH): 3.5 to 5.0 dKH
Carbon Dioxide:
If dKH level is:
Then CO2 level should be:
5º
10º
15º
10–15 mg/L
15–30 mg/L
30–40 mg/L
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
234 WATER QUALITY
Dissolved Oxygen Meter
YSI® PRO20 DISSOLVED OXYGEN METER
Designed specifically for aquaculture, the YSI Pro20 dissolved oxygen meter is a
rugged, user-friendly instrument for dissolved oxygen measurement. IP-67
waterproof and rubber over molded case, and 1-meter drop tests ensure the
instrument remains in your hands to provide years of sampling even in the
harshest field conditions. Choose a D.O. sensor that best meets your needs.
Fast response times with the Polarographic or Galvanic dissolved oxygen
sensors allow you to complete your sampling routine quickly. The long life of
the Polarographic sensor saves time and money and reduces your overall cost.
The Galvanic sensor enables you to start sampling immediately without a
warm-up period. Meters measure 3.25” x 8.5” x 2.25” and weigh 1 lb. Use 2 C
batteries (included). Three-year warranty on meters, two years on cables and
one year on probes. Internal barometer for highest accuracy
• Large, easy-to-read, backlit display and keypad
Y60020
• Fast cal routine allows easy calibrations with the press of a button
• Stores 50 data sets
• Rugged, weighted probe assembly
Meter, probe and cable
sold separately, or order
a kit that includes all this
plus a carrying case.
• View display with polarized sunglasses on and all lighting conditions
• Fastest response in 8 seconds with standard membrane
• Multiple languages include English, Spanish, French and German
• Rubber over mold case for durability
• Automatic barometric pressure and temperature compensation
• User replaceable sensors and cables
• Direct replacement for YSI Model 85
3-YEAR METER
WARRANTY
MODEL
Kits
Y603170 NEW
Y603171 NEW
SYSTEM SPECS (METER, PROBE & CABLE)
DISSOLVED OXYGEN (% SATURATION)
Range: 0–500% air saturation
Accuracy: ±2% of the reading
or ±2% air saturation
Resolution: 1% or 1% air saturation
DISSOLVED OXYGEN (MG/L)
Range: 0–50 mg/L.
Accuracy: ±2% of the reading
or ± 0.2 mg/L
Resolution: 0.01 or 0.1 mg/L
TEMPERATURE
Range: -5–55º C
(D.O. compensation range -5–45º C)
Accuracy: ± 0.3º C
Resolution: 0.1° C.
BAROMETER
Range: 400 to 999.9 mmHg.
Accuracy: ±5 mmHg
(within ±5° C of calibration temp)
Resolution: 0.1 mmHg
YSI® Instrument Repair
Whether it is a yearly checkup or the complete replacement of a circuit
board, you can count on us to provide accurate, economical and timely
service. This applies to all YSI® meters that we carry, whether or not they
were purchased from us.
EACH
METER, GALVANIC D.O. PROBE, 4M CABLE, CARRY CASE
METER, POLAROGRAPHIC D.O. PROBE, 4M CABLE, CARRY CASE
$1,095.00
1,095.00
Meter only
Y60020
PRO20 D.O. METER
$560.00
Y6202
GALVANIC D.O.
$180.00
Y6203
POLAROGRAPHIC D.O.
Probes
180.00
Cables (Includes Temp Sensor & Weighted Removal Board)
Y624C
4 METER
Y6210C
10 METER
$260.00
315.00
Y6220C
20 METER
375.00
Y6230C
30 METER
475.00
Replacement Membrane Kits
Y5908
Y5913
D.O. CAP KIT W/KCL (FOR POLAROGRAPHIC D.O. PROBES ONLY)
D.O. CAP KIT W/NACL (FOR GALVANIC D.O. PROBES ONLY)
$60.00
60.00
We honor all factory warranties, we stock a full inventory of replacement
parts and our labor rates are significantly lower than the amount charged
by most other YSI® repair facilities.
Galvanic vs Polarographic Sensors
To obtain an estimate or to send a meter for repair, call us at 877-347-4788
for a Return Authorization Number (RA#). This number will allow us to
identify your package and follow your instructions. You’ll also need to fill out
and send in our Return Form and Cleaning Certificate.
Galvanic sensors do not require a warm-up period. They are ready for immediate
use after being powered on.
Polarographic sensors require warm up time before use. The shelf life for
Polarographic sensors is theoretically longer than Galvanic sensors.
Low Labor Rates
Our electronics technicians are the best and our turnaround time is
fast (1–2 weeks). If you wish to expedite turnaround, we can do that for
a small fee. There is no charge for warranty repairs.
Nonwarranty repair estimates typically require between 60 and 120
minutes before a repair cost quotation can be made. Therefore, we will
have to charge for nonwarranty repair quotes, one-hour minimum.
changes without notice.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
YSI® and ProODO® are registered trademark(s) of YSI, Inc.
WATER QUALITY 235
Dissolved Oxygen Meter
YSI® PROODO® OPTICAL DISSOLVED OXYGEN METER
The YSI ProODO® is rugged, easy to use handheld optical dissolved oxygen
meter designed for sampling applications. With many benefits over traditional
D.O. technologies, the ODO (Optical Dissolved Oxygen) luminescent sensor
has no flow dependence, making it the perfect choice for applications where
stirring is difficult or undesirable. This also reduces the possibility of operator
error, ensuring high quality data. Unit is resistant to probe fouling and
interferences from hydrogen sulfide and other gases. The smart digital ODO
probe stores calibration data so probes can be interchanged between
instruments without recalibration. Stores 5,000 data sets, and USB
connection allows interaction with Data Manager software (included).
Supports English, Spanish, German, Italian, Norwegian, Portuguese and
French. IP67-rated case. Military spec connectors and field tested cables, 100
folders and site lists for logging data with user defined fields, and a graphic
display with detailed Help visible with polarized sunglasses. Salinity input
rate 0–70 ppt. Runs on two C batteries. 8.5" L x 3.25" W x 2.25" H, weighs 1 lb.
Three-year warranty on instrument, two years on cable and probe.
MODEL
EACH
Kit
Y603192 NEW
METER, PROBE, 4M CABLE, CARRY CASE
$1,475.00
Meter only
Y6262
PROODO METER
$725.00
Cables with Probe
Y62504
4 METER CABLE WITH ODO PROBE
$675.00
Y625010
10 METER CABLE WITH ODO PROBE
750.00
Y625020
20 METER CABLE WITH ODO PROBE
810.00
Y6262
3-YEAR METER WARRANTY
Replacement Part
Y6263
Meter, probe & cable sold
separately, or order a kit
that includes all this plus
a carrying case.
REPLACEMENT SENSING ELEMENT
$100.00
Accessories
Y603069
BELT CLIP
$28.00
Y603075
SOFT SIDED CARRYING CASE
125.00
Y603074
HARD SIDED CARRYING CASE
285.00
YSI® and ProODO® are registered trademarks of YSI, Inc
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
236 WATER QUALITY
Dissolved Oxygen Meter
YSI® 550A DISSOLVED OXYGEN METER
The YSI 550A D.O. meter is field-rugged and sets the standard for
aquaculture D.O. measurement. It is completely waterproof to 1 m
(IP67-rated), impact-resistant and measures dissolved oxygen to 50
mg/L and 500% saturation.
It features a field-replaceable, polarographic D.O. probe that is
weighted for quick sinking; easy-to-replace cap membranes,
push-button calibration and temperature, salinity (to 70 ppt) and
altitude (to 10,000') compensation. The large backlit
display shows simultaneous readings of oxygen, temperature (ºC or
ºF), and a low battery indicator. Includes four C batteries.
Three-year warranty on meter, one-year on probe. Spanish manual
available.
Y550A12
SYSTEM SPECS
D.O. RANGES
RESOLUTION
ACCURACY
TEMPERATURE RANGE
• Waterproof to 1 meter even with the battery door open
0–50 MG/L
0–500% AIR SATURATION
0.01 MG/L
0.1% SATURATION
± 0.3 MG/L
±2% SATURATION
-5–45°C
• 2,000-hour battery life
• Rugged aquaculture-grade cable
• New PE membranes lessen stirring dependence
SHIP WT
(LBS)
MODEL
3-YEAR METER WARRANTY
EACH
Y550A12
YSI 550A D.O. METER W/12' CABLE
7
$875.00
Y550A25
YSI 550A D.O. METER W/25' CABLE
10
920.00
Y550A50
YSI 550A D.O. METER W/50' CABLE
10
975.00
Y550A100
YSI 550A D.O. METER W/100' CABLE
10
1030.00
Y5908
REPL. MEMBRANE KIT W/KCL, POLAROGRAPHIC 1
Y559
REPLACEMENT SENSOR FOR YSI 550 & 550A
1
195.00
Y5060
SOFT-SIDED CARRYING CASE
3
105.00
Y5085
HANDS-FREE HARNESS
1
35.00
60.00
TECH TALK 26
DISSOLVED OXYGEN METERS AND PROBES
MODEL
MANUFACTURER
PARAMETERS
D.O. RANGE
(PPM OR MG/L)
ACCURACY
RESOLUTION
(PPM OR MG/L)
WATERPROOF
BACKLIT
DISPLAY
CONNECTORIZED
CABLE/PROBE
WARRANTY
METER/PROBE
OXYGEN
MEMORY/RS232
PROBE TYPE
DO62
American
Marine
D.O. Only
0–20.0
±.2 ppm
0.1
No
No
Yes
2-yr/2-yr
No
Polarographic
YDO200A
YSI*
D.O., Temp
0–20.0
±2%
0.1
No
No
Yes
1-yr/6-mo
No
Polarographic
Y55D
YSI*
D.O., Temp
0–20.0
±.25
.01
No
Yes
Yes
2-yr/1-yr
No
Polarographic
Y52
YSI*
D.O., Temp
0–19.99
±.02
.01
No
No
Yes
2-yr/6-mo
Yes
Polarographic
Y58
YSI*
D.O., Temp
0–19.99
±.03
.01
No
No
Yes
2-yr/6-mo
No
Polarographic
Y550A
YSI*
D.O., Temp
0–50.00
±.03
.01
Yes
Yes
No
3-yr/6-mo
No
Polarographic
Y60020
YSI*
D.O., Temp,
mmH
0–50.00
±2%
.01 or 0.1
Yes
Yes
Yes
3-yr/2-yr
No
Polaro./Galv.
850041
Sper
D.O., Temp
0–19.99
±1.5
.01
No
Yes
Yes
5-yr/6-mo
Yes
Polarographic
1OXHM053
OxyGuard
D.O., Temp,
% Sat
0-60.0
±1%
0.1
Yes
Yes
No
1 yr
Yes, Data Log
3,000 Sets
Galvanic
Y605120
YSI
D.O., TEMP, PH,
ORP (REDOX)
0 TO 50
±2%
0.01 OR 0.1
Yes
Yes
Yes
3-YR/1-YR
50 DATA SETS
POLARO./GALV.
Y606329
EcoSense
Optical D.O.,
Temp.
0 to 20
±1.5%
0.01
Yes
Yes
Yes
1-yr
50 data set
OPTICAL
Y626
YSI
OPTICAL D.O.,
TEMP.
0 TO 50
± 1%
0.01 OR 0.1
Yes
Yes
Yes
3-YR/2-YR
5000 DATA SETS
OPTICAL
Y6052030
YSI
D.O., Temp,
Cond
0 to 50
±2%
0.01 or 0.1
Yes
Yes
Yes
3-yr/1-yr
50 data sets
Polaro./Galv.
*Pentair Aquatic Eco-Systems, Inc., is an authorized YSI Instruments Repair Center. Temp=Temperature. Sal=Salinity. ORP=Oxidation/Reduction Potential
YSI® and ProODO® are registered trademarks of YSI, Inc
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 237
Dissolved Oxygen Meters
ECOSENSE DO200A DISSOLVED OXYGEN METER
The EcoSense® D0200A is an economical version
of the quality and results expected from YSI®.
The rugged housing is IP67 splash resistant, and the large
LCD simultaneously displays ppm or percent saturation and
temperature (ºC only). Easy-to-replace, screw-on cap
membranes have a fast response time and are low-stirring
dependent. Nine-volt battery life is typically 500 hours;
indicator warns when battery level is low. Detachable probe
and cable assembly sold separately below. One-year
warranty on meter, six-month warranty on probe.
Cable & Probe
Sold Separately
MODEL
EACH
YDO200A
DO METER ONLY
$290.00
YDO200A-4
DO METER, PROBE, 4M CABLE & CASE
630.00
Y2004
4-METER CABLE W/PROBE ONLY
310.00
Y20010
10-METER CABLE W/PROBE ONLY
330.00
Y5908
REPL. MEMBRANES W/KCL, POLAROGRAPHIC
Y200-BOD
BIOCHEMICAL OXYGEN DEMAND PROBE
Y2004
SYSTEM SPECS
RANGES
O2
Sat.
Temp.
0–20 mg/L
0–200%
-6–46° C
RESOLUTION
O2
Sat.
Temp.
0.01 mg/L
0.10%
0.1° C
ACCURACY
O2
Sat.
Temp.
± 0.2%
±2%
± 0.3° C
YDO200A
60.00
685.00
ECOSENSE ODO200 OPTICAL DO & TEMPERATURE METER
The EcoSense® ODO200 handheld dissolved oxygen meter uses optical
technology and provides the most accurate data in the most affordable
format. Features an easy-to-use interface, one-hand operation, IP67
waterproof case, and low cost of ownership over the life of the product.
The ODO200 simultaneously measures dissolved oxygen % and mg/L and
(optical) temperature. One-year warranty on meter, cables and sensor cap.
Made in USA.
• Automatic temperature compensation
• Manual input for salinity and pressure compensation
Cable & Probe
Sold Separately
Y606329
• Low battery indicator with 100 hour battery life
• Auto shutoff function after 30 minutes of inactivity
• 50 data set reviewable memory
Optical benefits include
• No stirring requirement
• No warm-up time
• No electrolyte solutions
• No electrode maintenance
• No membranes
• No interferences from gases such as hydrogen sulfide
SYSTEM SPECS
RANGES
O2
Sat.
Temp.
0–20 mg/L
0–200%
0-50° C
RESOLUTION
O2
Sat.
Temp.
0.01 mg/L
0.10%
0.1° C
ACCURACY
O2
Sat.
Temp.
± 1.5%
±1.5%
± 0.3° C
MODEL
EACH
Y606329
OPTICAL DO/TEMP METER ONLY
$330.00
Y606327
1-METER CABLE WITH DO/TEMP PROBE ONLY
590.00
Y606328
4-METER CABLE WITH DO/TEMP PROBE ONLY
600.00
Y606304
10-METER CABLE WITH DO/TEMP PROBE ONLY
675.00
Y606326
SENSOR CAP KIT
102.00
Y606330
HARD PLASTIC CARRYING CASE WITH FOAM INSERT
40.00
YSI® and EcoSense® are registered trademarks of YSI, Inc
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
238 WATER QUALITY
Dissolved Oxygen Meter
OXYGUARD HANDY POLARIS 1 DISSOLVED OXYGEN METER
The OxyGuard Handy Polaris is a portable D.O. meter that also measures %
saturation, mg/L (ppm), temperature and has salinity compensation.
Measurements are compensated for temperature and barometric pressure.
The probe is galvanic type and fully field-serviceable. Has a large display with
backlight and offers automatic calibration and a choice of language and units
of measurement. Each unit is supplied with a detachable clip for easy attachment
to a belt or clipboard. Battery life allows up to 1,400 hours of use from a
single 9V battery.
• Automatic calibration with stability check.
• Compensates for changes in atmospheric pressure.
• Automatic shutdown for power saving.
MODEL
EACH
1OXHM053
HANDY POLARIS W/3-M (10') CABLE
$819.00
1OXHM058
HANDY POLARIS W/8-M (25') CABLE
859.00
1OXHA013
HANDY MEMBRANE KIT, 10 PCS
16.40
1OXPA014
STANDARD ELECTROLYTE, 1 L
22.80
1OXPA015
STANDARD ELECTROLYTE, 250 ML
10.30
1OXPA016
STANDARD ELECTROLYTE, 50 ML
3.61
1OXHA010
MEMBRANE INSTALLATION TOOL
14.90
1OXHA007
PROBE PROTECTION CAP
30.20
1OXHA006
HANDY MEMBRANE CAP WITH MEMBRANE
63.00
SYSTEM SPECS
PARAMETERS
ppm (mg/L), % saturation,
temperature (ºC or ºF), salinity
compensation.
SALINITY COMPENSATION
0–59 ppt salinity (manually set).
DISPLAY
Large, easy to read graphical LCD
display. Variable backlight.
ACCURACY, D.O.
Depends on calibration accuracy.
Typically better than +/- 1% of measured
value +/- 1 digit within the standard
measuring range.
PROBE TYPE
Galvanic cell, self-polarizing, selftemperature compensating.
ACCURACY, TEMPERATURE
+/- 0.2ºC
CABLE LENGTH
Standard 3 m.
REPEATABILITY
Typically better than +/- 0.5% of
measured range.
OPERATING CONDITIONS
Probe: -5 to +45ºC, Meter: -20 to
+60ºC
SELF-CHECK OF
Probe function, meter function, cable,
battery.
ENCAPSULATION (METER)
Short-term immersion proof to max.
5-m depth.
STANDARD ACCESSORIES
Membrane cap, membranes, electrolyte,
cathode cleaning pad, storage pouch.
MEASURING RANGE
0–60.0 ppm (mg/L) and 0–600%
saturation. Automatically
compensated for temperature and
barometric pressure. Manual salinity
compensation. Temperature: -5 to
+45ºC.
COMMITMENT TO CUSTOMER SATISFACTION
Our customers are our first priority.
We will provide extraordinary service to satisfy the needs of our customers.
We will deliver our products and services on time and error free, conforming to the requirements
of our customers.
We strive to do it right the first time and eliminate any problem that prevents us from achieving
complete customer satisfaction.
We thank you for your patronage.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 239
Dissolved Oxygen Meter
OXYGUARD HANDY POLARIS 2 DISSOLVED OXYGEN METER
The OxyGuard Handy Polaris 2 is a portable dissolved oxygen (D.O.) meter
that combines the features of the original Polaris with the convenience of
data logging and data transfer capability. It measures % saturation, mg/L (ppm)
and temperature and has salinity compensation. Measurements are compensated
for temperature and barometric pressure. The galvanic probe is fully fieldserviceable. Powered by a 9V battery. The Polaris 2 has a larger display with
backlight and offers automatic calibration, and a choice of language and units
of measurement. Includes a detachable clip for easy attachment to a belt
or clipboard.
MODEL
EACH
1OXHM073
HANDY POLARIS 2 W/3-M (10') CABLE
$889.00
1OXHM075
HANDY POLARIS 2 W/8-M (25') CABLE
939.00
254.00
1OXHM074
USB LINK W/SOFTWARE (ONLY 1 REQUIRED FOR MULTIPLE UNITS)
1OXHA013
HANDY MEMBRANE KIT, 10 PCS
16.40
1OXPA014
STANDARD ELECTROLYTE, 1 L
22.80
1OXPA015
STANDARD ELECTROLYTE, 250 ML
10.30
1OXPA016
STANDARD ELECTROLYTE, 50 ML
3.61
1OXHA010
MEMBRANE INSTALLATION TOOL
14.90
1OXHA007
PROBE PROTECTION CAP
30.20
1OXHA006
HANDY MEMBRANE CAP WITH MEMBRANE
63.00
TECHNICAL ADVANTAGES
METER
• Data logging and data transfer capability—over 3,000
sets of complete info (mg/L, % sat, temp, events, etc.).
Polaris 2 only.
• Automatic calibration with stability check.
• Automatic self-check of instrument.
• Automatic check of cable and probe.
• Compensates for changes in atmospheric pressure.
• User-selectable language and main display parameter.
• “On-screen” instructions.
• 1,400 hours use from one 9V alkaline battery.
• Illuminated display with variable intensity.
• Automatic shutdown for power saving.
PROBE
• Galvanic type.
• Self-polarizing.
• No warm-up time.
• Fully temperature compensated.
• Remarkably short response time.
• Stores dry.
• Excellent long-term stability.
• Tough membrane.
• No need for regular service or renovation.
• Probe renovation easy and fast when needed.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
240 WATER QUALITY
Dissolved Oxygen Meters
PINPOINT® DISSOLVED OXYGEN METER
Featuring a high-performance oxygen probe, this
oxygen meter is a very good value. Temperaturecompensated from 0–50°C (32–122ºF) with an
accuracy of ± .2 ppm. Measures 0–20 ppm or
percent saturation. Each meter comes with a
replaceable probe on a 5' cable (the 12' extension
cable cannot be submerged). Uses one 9V battery
(included). Meter measures only 3" x 5". Meter,
probe and cable are not waterproof nor waterresistant. The high performance DO62P probe is
compatible with the old DO6 meters. Two-year
warranty on the meter and probe (does not cover
mishandling or water damage to meter).
MODEL
DO62
DO62P
EACH
OXYGEN METER
DO62
$259.00
DO62P
REPLACEMENT PROBE
DO62M
MEMBRANE KIT*
139.00
24.99
DO6A
12' EXTENSION CABLE
29.99
PA12
AC ADAPTER
11.99
DO6A
DO62M
2-YEAR METER WARRANTY
*Electrolyte solution included.
Pinpoint® is a registered trademark of Dell Technology DBA American Marine, Inc.
DISSOLVED OXYGEN METER KIT
5-YEAR METER WARRANTY
850048
Use this D.O. kit in environmental testing,
labs, industrial and municipal waste water,
aquariums and fish hatcheries. Its programming
and functionality are easy to follow. It has
automatic temperature compensation as well as
compensation for salinity and altitude.
Simultaneously displays D.O. (in ppm or mg/L),
temperature readings (in ºC or ºF) and the date.
Review 99 data points with time stamps directly
on the large backlit LCD. Simple, one-button air
calibration and adjustable membrane temperature
coefficient. Transparent galvanic probe has built-in
temperature sensor and a 4-m cord. Also has
"min-max" and "average" functions. Comes in a
hard carrying case complete with built-in RS232
port, probe, spare membranes, electrolyte with
syringe and four AAA batteries. Weighs 14 oz (397
g). 63⁄4" L x 23⁄4" W x 11⁄4" H (170 x 70 x 33 mm).
Five-year warranty on meter, one year on probe.
SYSTEM SPECS
MODEL
EACH
850048
DISSOLVED OXYGEN METER KIT*
850048DO
REPLACEMENT DISSOLVED OXYGEN PROBE**
109.00
850048CS
OPTIONAL CONDUCTIVITY/SALINITY PROBE**
83.00
850048PH
OPTIONAL PH PROBE **
83.00
*Model 850048 replaces model 850041.
**Not compatible with the old D.O. Meter Kit, model 850041.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
$367.00
D.O.,
PPM AND MG/L
Range: 0–19.99
Resolution: 0.01
Accuracy: ±1.5%
TEMPERATURE ºF
Range: 32–122ºF
Resolution: 0.1ºF
Accuracy: ±2ºF
TEMPERATURE ºC
Range: 0–50ºC
Resolution: 0.1ºC
Accuracy: ±1ºC
WATER QUALITY 241
ORP Meters
ECOSENSE® ORP15A ORP/TEMPERATURE PEN
YORP15
The ECOSENSE® ORP15A takes absolute and relative ORP readings from -1,100
to +1,100 mV with this affordable instrument. Calibrate to an ORP standard! Use
the Zobell ORP calibration solution (sold separately) to recalibrate at any time.
It has replaceable electrodes, automatic temperature compensation and auto
shut-off. Use the 50-set memory (absolute/relative mV, temperature and a date
and time stamp) and “hold” feature that locks readings on-screen. Easy-tounderstand menus and IP67 housing. Measures -10ºC to 100ºC (14 to 212ºF).
Uses GAP-76 batteries (included). >200 hour battery life with low battery
indicator. Pen is not waterproof nor water-resistant. One-year instrument
warranty, six-month electrode warranty. Weighs 0.25 lb.
MODEL
PINPOINT® ORP METER
FW
EACH
YORP15
ORP/TEMP PEN
$167.00
Y3628
ZOBELL ORP TEST SOLUTION
33.00
Y605123
ORP REPLACEMENT ELECTRODE KIT
75.00
7021
ORP CALIBRATION SOLUTION, 240MV
25.00
7022
ORP CALIBRATION SOLUTION, 470MV
25.00
SW
This little meter offers ORP data at a very affordable price. Detachable probe
with 10' cable uses BNC connector and is accurate to ±1 mV. Epoxy-covered
electrode with a platinum band and silver/silver chloride (Ag/AgCl) tip. For
calibration, it has an easy-to-use offset screw. Liquid crystal display. Powered
by single 9V battery (included). Can be used in both fresh and salt water.
Measures 2" x 5.5". Six-month warranty. Probe included. Calibration solutions
sold separately. Meter is not waterproof nor water-resistant.
MODEL
EACH
ORP3
ORP/REDOX METER
ORP3R
ORP REPLACEMENT PROBE
ORP3CS
CALIBRATION FLUID, 350 ML
PA12
OPTIONAL AC ADAPTER
$135.00
75.00
ORP3
4.00
12.00
EcoSense® is a registered trademark of YSI, Inc. Pinpoint® is a registered trademark of Dell Technology DBA American Marine, Inc.
TECH TALK 67
Water Pollution
Any physical, biological or chemical change in water quality that adversely affects living organisms
or makes water unsuitable for desired uses can be considered pollution.
Common Impurities in Water
Dissolved: Cations, anions, organic compounds such as vegetative dyes and pesticides and gases
such as hydrogen sulfide and chlorine.
Suspended: Silt, clay, feces, organic and inorganic colloids and living organisms such as bacteria,
viruses, protozoa and algae.
mainly bacteria, in the oxidation of organic materials. The standard test is for 5 days at 20°C, and
the value it yields is referred to as the 5 day biochemical oxygen demand, commonly shown as BOD5
(see Index for BOD meters). Another measurement is chemical oxygen demand (COD), which is the
measurement of the organic materials in terms of the oxygen required to chemically oxidize them.
It is measured by boiling and refluxing the sample with a strong oxidizing agent (potassium
dichromate), then determining the amount of agent used.
Typical Treatment Processes for Organic Compounds
Anaerobic Digestion
Floating: Oils and grease, feces and debris.
Biological oxidation of degradable organics by microbes under conditions where there is no
molecular oxygen. These are mainly used for swine, poultry and beef industries.
Water Quality Characteristics
Digestion is done by anaerobic bacteria, organic-acid forming and methane-producing heterotrophs.
Physical: Total suspended and dissolved solids, turbidity, color, odors and temperature.
Advantages: Low operational costs, no need for aeration and self-sufficiency if managed properly.
Chemical: pH, alkalinity, hardness, conductivity, dissolved gases, etc.
Disadvantages: Odors, sludge must be removed periodically, land space needed (long treatment
time), and NIMBY (not in my back yard).
Biological: Algae and microbes (bacteria, protozoa, fungi, etc.).
Water Quality Indicator
The amount of oxygen dissolved (D.O.) in water is a good indicator of water quality commonly used
in aquaculture. Water with a D.O. of 8 ppm will support game fish and other desirable forms of life.
Water with less than 2 ppm oxygen will support only certain fish, worms, bacteria, fungi and other
decomposers. Certain organic materials increase oxygen consumption by decomposers. This is
measured by the biochemical oxygen demand (BOD). This is the amount of oxygen used by microbes,
Aerobic Digestion
Biological oxidation of organics under conditions where there is molecular oxygen. Digestion is done
by aerobic and facultative bacteria.
Advantages: Less odor, reduction in pollution characteristics of the effluent and low treatment time.
Disadvantages: Higher operational cost (equipment maintenance, electrical cost).
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
242 WATER QUALITY
Total Dissolved Gas Pressure (TGP) Meter
TOTAL DISSOLVED GAS PRESSURE (TGP) METER
The Pentair Aquatic Eco-Systems Point Four Tracker provides measurements
for TGP (mmHg or % saturation), ∆P, barometric pressure (mmHg) and
temperature (ºC).
Increasing water temperatures, injection of air in water, algal blooms or
pressurized pumping can result in gas supersaturation. This may lead to
bubble trauma or sub-lethal toxicological problems for aquatic species.
The TGP probe provides a rapid and accurate measurement of total dissolved
gas pressure.
The Tracker has simple calibration procedures and easy to understand menus.
The handheld meter features a tough membrane keypad and graphical display
with a user-selectable backlight. The Tracker has two pressure sensors, one
measures total dissolved gas pressure (TGP), and one measures barometric
pressure (BP). Also has datalogging capabilities. The batteries are
rechargeable and an AC adapter is included with each unit.
SYSTEM SPECS
RANGE
RESOLUTION
MEASUREMENTS:
PARAMETER
Total Gas Pressure (TGP)
Barometric Pressure (BP)
Temperature
RANGE
0–1,550 mmHg
0–1,550 mmHg
0.0–40.0ºC
1 mmHg
1 mmHg
0.1ºC
DERIVED:
Total Gas Pressure (TGP)
∆P (TGP-BP)
0–200%
-1,550–1,550 mmHg
1%
1 mmHg
MODEL
1SSM100
EACH
1SSM100
PT4 TRACKER HANDHELD METER
1SSP0031
TGP/TEMPERATURE SMART PROBE, 5-M CABLE
1SSP060
LUMI4 TGP OPTICAL O₂/TEMP PROBE, 5-M CABLE
1SSA025
REPL. TGP CARTRIDGE FOR 1SSP0031
170.00
1SSP070
LUMI4 REPL. D.O. PROBE CAP
315.00
1SSP080
LUMI4 REPL. TGP CARTRIDGE
189.00
1SSA015
PT4 TRACKER EXTEND. DEPLOYMENT PACKAGE
(CASE, BATTERIES, CHARGER)
538.00
9EPTPS003
GEL CELL BATTERY, 6V, 12AH
39.20
9EMSC033
NIMH RECHARGEABLE BATTERY PACK, 4 X AA
31.50
Meter & Probe
Sold Separately
$680.58
669.90
3,092.92
1SSA005
CHARGER CABLE W/AC ADAPTER
85.00
1SSA006
CHARGER CABLE W/CAR ADAPTER
85.00
1SSA007
DATA TRANSFER CABLE W/USB ADAPTER,
BULGIN CONNECTOR
85.00
IN-HOUSE REPAIR
AND SERVICE AVAILABLE
Contact Pentair Aquatic Eco-Systems
for more details.
TECH TALK 9
Supersaturation
The measurement of total dissolved gas pressure (TGP) can be required in aquaculture. When
the total pressure of all gases in the water exceeds the ambient atmospheric pressure at the
water’s surface, supersaturation exists. The effect of excessive supersaturation on fish has
been well documented and has caused massive fishkills. TGP as low as 103% can be lethal!
Supersaturation can be caused by numerous man-made and natural sources:
• Dam spillways can allow a high volume discharge to plunge air deep into the receiving water.
• Water pump inlets can suck air, putting that air under high pressure in the piping (this is all
too common, even in aquariums).
• Naturally high levels of nitrogen can be found in well water.
• Algae blooms can cause supersaturated levels of oxygen.
1SSP060 - Lumi4 Probe: Optical DO/Temp & TGP
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
• Temperature changes, which affect the saturation level. Simply heating the water can cause
lethal supersaturation.
WATER QUALITY 243
TGP and CO2 Meters
TOTAL DISSOLVED GAS PRESSURE (TGP) TRANSMITTER
The Pentair Point Four Systems TGP Transmitter is a stand-alone probe for the
measurement of total dissolved gas pressure. It provides measurement
for TGP (mmHg or % saturation), ∆P (TGP-BP), barometric pressure (BP)
(mmHg) and temperature (ºC).
Two analog outputs are available from each TGP probe. They are available in
0-20 mA, 4-20 mA or 0-5VDC and can be configured to any of the five
available measurement parameters. Measurements are also available via
RS-485 and can be viewed on a PC with the optional software package.
TGP probes are not loop-powered and can accept a 9-33VDC power supply.
115VAC to 12VDC power supply is optional.
MODEL
1SSM002
EACH
1SSM002
$915.00
TGP TRANSMITTER
1SSA025
REPL. TGP CARTRIDGE
1SSA029
PC SOFTWARE AND CABLE
170.00
75.00
1PTPS011
115VAC TO 12VDC POWER SUPPLY
48.54
SYSTEM SPECS
PARAMETER
RANGE
RANGE
RESOLUTION
MEASUREMENTS:
Total Gas Pressure (TGP)
Barometric Pressure (BP)
Temperature
0–1,550 mmHg
0–1,550 mmHg
0.0–40.0ºC
1 mmHg
1 mmHg
0.1ºC
DERIVED:
Total Gas Pressure (TGP)
∆P (TGP-BP)
0–200%
-1,550–1,550 mmHg
1%
1 mmHg
IN-HOUSE REPAIR
AND SERVICE AVAILABLE
Contact Pentair Aquatic Eco-Systems
for more details.
OXYGUARD PORTABLE CO2 METER
The OxyGuard portable CO2 meter is a reliable and easy-to-use instrument
that measures dissolved carbon dioxide in water. The meter consists of
a probe and a battery-powered transmitter. The meter displays CO2
concentration and an analog signal as output. The transmitter has an on/off
switch, "slope" and "zero" adjustments. Battery charger (230V), calibration
accessories and 3-m cable are included. A version with built-in data logger
is available.
Measures the CO2 gas pressure directly and is not affected by carbonates or
other dissolved substances. It is therefore possible to achieve simple,
continuous direct measurements of carbon dioxide in water that affects fish.
Methods such as test kits, laboratory analysis and the detection of pH
changes are subject to disturbance from the dissolved substances found in
aquaculture water. The OxyGuard CO2 measures only the CO2 that affects the fish,
which is the free dissolved CO2 gas. It is reliable and accurate. Calibration
accessories pack includes beaker with stirrer and magnet; 75 g of pH
conditioner with dosing spoon; 100 mL of calibration solution with dosing
syringe; and adjustment screwdriver.
MODEL
Cable & Probe
Sold Separately
EACH
1OXYCO485
OXYGUARD CO₂ PORTABLE
$2,592.00
1OXYCO495
OXYGUARD CO₂ PORTABLE W/DATA LOGGER,
230VAC CHARGER
1OXYCO477
PH CONDITIONER, 75 G
21.10
1OXYCO478
CALIBRATION SOLUTION, 100 ML
60.00
1OXYCO476
CALIBRATION BEAKER W/STIRRER
1OXYCO480
CALIBRATION ACCESSORIES PACK
367.00
1OXYCO496
OXYGUARD DISSOLVED CO₂ PROBE
754.00
3,290.00
405.00
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
244 WATER QUALITY
Total Dissolved Gas Pressure (TGP) Meter
POINT FOUR SMART PROBE
WIRELESS MONITORING DEVICE
DESIGNED HERE
NEW!
Point Four Smart Probe technology replaces traditional water quality
instruments with an innovative wireless enabled solution.
The SMART PROBE allow users to view and record data streaming directly
from sensors deployed in the water to their smart phone or tablet.
PROVIDING DATA WITHIN REACH!
A compatible phone or tablet acts as the core interface between the probe
and the user eliminating the need for proprietary hand-held devices.
The App based interface offers a seamless user experience. Smoothly switch
from taking a spot check reading at various locations to capturing long
term data logged values for up to 2 weeks based on a user selectable
logging frequency.
Point Four Smart Probe technology improves productivity and communication
while reducing the need for additional components or equipment.
HOW IT WORKS
Smart Probe Device & Probe Sold Seperatly
1. Download the App
2. Pair your phone or tablet to the Smart Probe device
3. Connect the Smart Probe device to your sensor
4. Place the sensor in the water
5. Start measuring
Compatible with iOS devices running
iOS 8 and above.
MODEL
1SSM102
EACH
PT4 SMART PROBE DEVICE
$375.00
1SSP0031
TGP/TEMPERATURE SMART PROBE, 5-M CABLE
669.90
1SSA025
REPL. TGP CARTRIDGE FOR 1SSP0031
170.00
App Store® and iOS® are registered trademarks of Apple, Inc. in the United States and/or other countries.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
FOR MORE INFORMATION VISIT PENTAIRAES.COM
WATER QUALITY 245
Total Dissolved Gas Pressure (TGP) Meter
LONG TERM DATA LOGGING
SPOT CHECKS
Mount the Smart Probe to a tank:
Datalog multiple locations and sync values directly to your iPhone.
Clip the Smart Probe to your waist:
Conduct spot check reading at various locations.
SMART PROBE APP FEATURES
Main Display:
Tap to toggle between senors values.
Use the Capture button to save spot check
reading to your iPhone.
Transmitter Screen:
Smart Probe Transmitter connection status and site
location assignments are displayed.
Data Download:
Datalogged values are sent from the Smart Probe
transmitter to your iPhone.
Site Details:
View logging frequency and datalogged values.
Stored data can be exported for additional reporting.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
246 WATER QUALITY
pH Meters
PINPOINT® PH METER
FW
SW
The Pinpoint® PH370 meter is a great little pH meter at a very affordable price.
The detachable probe with its 10' cable uses a BNC connector. It has built-in
slope and calibration adjustments but is not temperature compensated (if you
take measurements anywhere near room temperature, the temperature error
will be negligible). Two-point calibration.
The digital display is easy to read, even in full sun. Two-year warranty on the
meter only. Measures 5.5" L x 3" W, weighs just 0.3 lb.
2-YEAR
METER WARRANTY
• Includes pH probe, 10’ cable, calibration solutions #7 & #10, and 9V battery
• Not waterproof nor water-resistant
MODEL
PH370
ECOSENSE® PH100A PH/TEMP METER
FW
EACH
PH370
PH METER
$99.00
PH370R
PH REPLACEMENT PROBE
46.55
PA12
AC ADAPTER
12.00
SW
The YSI® EcoSense pH100A measures pH and temperature (ORP requires
separate probe) quickly and accurately. The electrode offset recognition
functiondisplays electrode efficiency and indicates when it is time to replace
the pH electrode. Features include internal buffer recognition, auto/manual
temperature compensation and a large LCD display that simultaneously
displays pH or mV and temperature (ºC only). Electrodes with 3' (1 m) cables
are available in pH or combination pH/mV. Two-point pH calibration. Cables are
waterproof over their whole length. 9V batteries included. Measures 7" x 3".
Order meter and probe separately. One-year warranty on meter, six months on
probes. Calibration solutions sold separately.
MODEL
Y1000A
Cable & Probe
Sold Separately
EACH
Y1000A
PH100A METER ONLY
$265.00
Y1001
PH/TEMP PROBE W/3' CABLE
99.00
Y1004
PH/TEMP PROBE W/12' CABLE
147.00
Y1101
PH ELECTRODE W/3' CABLE
60.00
Y1201
TEMP PROBE W/3' CABLE
55.00
Y1251
ORP ELECTRODE W/3' CABLE
Y1111
PIERCING PROBE DOUBLE JUNCTION
147.00
SYSTEM SPECS
Y1122
FLAT GLASS PROBE DOUBLE JUNCTION
147.00
PH
Range: -2–16
Resolution: 0.01
Accuracy: ± 0.1%
ORP
Range: -1,999–1,999 mV
Resolution: 1 mV
Accuracy: ± 0.1%
TEMPERATURE
Range: -10–120°C
Resolution: 0.1°C
Accuracy: ± 0.3°C
95.00
Pinpoint® is a registered trademark of Dell Technology DBA American Marine, Inc. YSI® and EcoSense® are registered trademarks of YSI, INc.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 247
pH Meters
PH/TEMP TESTERS
FW
SW
These floating testers have a large LCD, push-button calibration with buffer
recognition (can be calibrated to 3 points), auto shut-off after 8.5 minutes,
automatic temperature compensation and a user-replaceable double-junction
sensor. These testers will float if dropped in water. The pHTestr® meter 10
reads -1.0 to 15.0, the pHTestr® 20 and 30 read -1.00 to 15.00 and the pHTestr®
30 has simultaneous temperature display in ºC or ºF. All have self-diagnostic
messages such as battery power indicator and a hold function to freeze values
for future use. Measures 1.5" W x 6.5" long, weighs 0.3 lb. One-year instrument
warranty, six-month electrode warranty. Calibration solutions sold separately.
MODEL
WD-35634-30
EACH
WD-35634-10
PHTESTR 10
$96.00
WD-35634-20
PHTESTR 20
105.00
WD-35634-30
PHTESTR 30
116.00
35624-38
REPL. PH SENSOR
69.50
TRB
REPL. BATTERIES (6-PK)
16.25
ECOSENSE® PH10A PH/TEMP PEN
YPH10A
FW
SW
The EcoSense pH10A pH/Temperature pen features one-hand operation,
50-set memory and low cost. Measures 0 to 14 with an accuracy
of ± 0.02. The pen has IP67 waterproof grey housing; ATC; auto-buffer
recognition with 1-, 2- or 3-point calibration; and a replaceable electrode. Real
time clock provides data date and time stamp. "Hold" feature locks reading on
display, which has on-screen instructions. Has a belt clip and lanyard on the
back and floats if dropped in water. Measures 2" W x 7.5" L, weighs 0.3 lb.
One-year instrument warranty, six-month electrode warranty. Calibration
solutions sold separately.
MODEL
EACH
YPH10A
PH10A PEN
$116.00
606110
REPL. ELECTRODE FOR YPH10A PEN (GREY)
53.00
605113
REPL. ELECTRODE FOR YPH10 PEN(BLUE)
53.00
605118
LR44 REPL. BATTERIES (4)
Y580
CARRYING CASE
5.00
29.00
TECH TALK 30
pH Probe Care & Storage
Proper handling and storage of pH electrodes will not only help to prolong the electrode’s life, but
also will ensure fast, accurate readings. General guidelines include:
• Electrodes should be rinsed between samples with deionized or distilled water.
• Never wipe an electrode dry as this can cause erroneous readings due to static charges.
• Never store electrodes in water; doing so will cause a sluggish response.
• Always keep the tip of the pH electrode moist. Electrode storage solution is a solution of 4M
KCl. If unavailable, a pH 4 buffer solution will also work temporarily.
• In general, pH buffers only have a two-year shelf life unopened. Once opened, the shelf life
drops to 2–3 months. However, open pH 10 calibration solution only has a 30-day shelf life.
pHTestr® is a registered trademark of Cole-Parmer Instruments Co.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
248 WATER QUALITY
Conductivity Meters
ECOSENSE® EC300A CONDUCTIVITY/SALINITY/TDS/TEMP METER
The EcoSense EC300A offers convenient conductivity, specific conductance,
salinity, total dissolved solids and temperature for true field applications. Meter
has IP67 waterproof rating and automatic temperature compensation. Automatic
shutoff after 30 minutes of inactivity helps preserve 9V battery life, which can last
up to 500 hours. 50 data-set memory.
MODEL
EACH
KITS
YEC300A-1
$565.00
METER, PROBE, 1M CABLE, CARRYING CASE
YEC300A-4
METER, PROBE, 4M CABLE, CARRYING CASE
585.00
YEC300A-10
METER, PROBE, 10M CABLE, CARRYING CASE
600.00
METER ONLY
YEC300A
$300.00
EC300A METER
CABLES WITH PROBE
Y606044
1 METER CABLE WITH PROBE
$250.00
Y605395
4 METER CABLE WITH PROBE
265.00
CALIBRATION SOLUTIONS
Y3167-E
1,000 uS/CM PER PINT (FRESH WATER)
$20.00
Y3168-E
10,000 uS/CM PER PINT (BRACKISH WATER)
20.00
Y3169-E
1,000 uS/CM PER PINT (FRESH WATER)
20.00
YEC300A-4
ACCESSORIES
Y606043
$40.00
HARD SIDED CARRYING CASE
SYSTEM SPECS
RANGE
RESOLUTION
ACCURACY
0 to 499.9 µS/cm
0 to 4999 µS/cm
0 to 49.99 mS/cm
0 to 200.0 mS/cm
0.1 µS/cm
1 µS/cm
0.01 mS/cm
0.1 mS/cm
± (1% of reading + 2 µS/cm)
± (1% of reading + 5 µS/cm)
± (1% of reading + 0.05 mS/cm)
± (2.5% of reading + 0.5 mS/cm)
SALINITY
0.0 to 70.0 ppt, calculated
±0.2% FS
0.1 ppt
TEMPERATURE
-10 to +90°C (14 to 194°F)
0.1°C
±0.2°C or ±0.4%, whichever
is greater
CONDUCTIVITY
TDS
TDS in g/L calculated;
enter constant values from
0.30 to 1.00, default value 0.65
PINPOINT® CONDUCTIVITY METER
If you need to measure freshwater conductivity in µS, this economical,
two-range meter is an excellent choice. This scale is typically used for
fresh water and low concentrations of salt. The LED reads in two ranges
at the flip of a switch. Measures from 0–2,000 µS or 0–20,000 µS. Accurate
to ±4% of reading. 5.5" L x 3" W, weighs only 0.4 lb.
• Includes 3’ cable and 9v battery
• Not waterproof nor water-resistant
• Calibration solution sold separately
MODEL
CM6
EACH
CM6
CONDUCTIVITY METER
PA12
OPTIONAL AC ADAPTER
$125.00
12.00
2-YEAR WARRANTY
EcoSense® is a registered trademark of YSI, Inc. Pinpoint® is a registered trademark of Dell Technology DBA American Marine, Inc.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 249
Conductivity Meters
ECOSENSE® EC30A CONDUCTIVITY/TDS/TEMP PEN
The EcoSense® EC30A pen-style instrument provides an ultimate feature set over similar competitive
models. Features an easy-to-use interface,
simple one-hand operation and low cost of ownership over the life of the product. The easy, userreplaceable electrode ensures the instrument is always ready for use. Meter has IP67 waterproof
rating and automatic temperature compensation. 50 data-set memory and 200-hour battery life.
Measures conductivity, TDS and temperature with the following features:
• 1- or 2-point calibration
• Clear, easy-to-read display with on-screen instructions
• Selectable units of measure for conductivity, TDS and temp
• Selectable or auto-ranging for conductivity or TDS
MODEL
EACH
YEC30A
COND/TDS/TEMP PEN
Y3167-E
CALIBRATION SOLUTION, 1,000 uS/CM (FRESH WATER)
$147.00
20.00
Y3168-E
CALIBRATION SOLUTION, 10,000 uS/CM (BRACKISH WATER)
20.00
Y3169-E
CALIBRATION SOLUTION, 50,000 uS/CM (SALT WATER)
20.00
SYSTEM SPECS
RANGE
RESOLUTION
ACCURACY
CONDUCTIVITY
0 μS to 19.90 mS,
with manual or
auto ranging
0 to 1990 μS/cm
5 μS/cm
2.00 to 19.90 mS/cm
0.05 mS/cm
±1% FS
TEMPERATURE
0 to 99.5°C
(32.0 to 212 °F)
0.5 °C (1 °F)
±0.5°C (1°F)
EXSTIK II® PH/CONDUCTIVITY/TDS/SALINITY PEN
The Extech® EXSTIK II® waterproof meter has a rugged combination, flat-surface pH electrode
(withauto-ranging), high-accuracy conductivity cell. RENEW feature alerts users when the
electrode needs replacing. Adjustable conductivity to TDS ratio from .4 to 1.0 and .5 fixed
salinity ratio. Meter also has ATC, auto shut-off and low battery indication. The internal memory
stores up to 25 labeled readings for recall. Measures 1.5" W x 7" L. Due to its salinity range,
this meter is not compatible with salt water. One-year warranty on meter, six months on sensor.
MODEL
EACH
EC500
EXSTIK II® WATERPROOF METER
EC505
SPARE ELECTRODE
$159.99
EC500
64.99
EX006
WEIGHTED BASE W/5 SOLUTION CUPS
15.99
CA895
SMALL VINYL CARRYING CASE
10.99
SYSTEM SPECS
RANGE
RESOLUTION
ACCURACY
CONDUCTIVITY
0–199.9 µS/cm
200–1,999 µS/cm
2–19.99 mS/cm
.1 µS/cm
±2% FS
TDS/SALINITY
0–99.9 ppm (mg/L)
100–999 ppm (mg/L)
1–9.99 ppt (g/L)
.1 ppm (mg/L)
±2% FS
0 to 14.00
.01
± .01
PH
ExStik® is a registered trademark of Extech Instruments Corp.
“The ExStik II DO and Conductivity meters work perfectly for collecting data quickly and
accurately in the field, and save a tremendous amount of space aboard the small boat. They
worked so well we bought a second set!”
G. Jones
Lake Operations Manager
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
250 WATER QUALITY
Salinity Refractometers
SALINITY REFRACTOMETER
TECH FAV
• Largest and sharpest scale display available.
• Calibration ring for simplified calibration.
The VITAL SINE salinity refractometer features a
magnified scale for better visual accuracy. Other
features include solid aluminum construction, a
rubber-gripped body and temperature
compensation between 10 and 30°C (50–86°F). To
calibrate, simply loosen the handset screw, place a
few drops of salt-free water on the prism, turn the
calibration ring until the shadowline is at zero and
secure the set screw—that's it! It reads specific
gravity (1.000 to 1.070) and salinity in parts per
thousand (0–100 in 1 ppt divisions). Refractometer
includes a black vinyl zip case, transfer pipette and
cleaning cloth. Measures 11⁄2" D x 7" L (4 x 18 cm),
weighs 0.6 lb (285 g). One-year warranty.
Rubber Hood.
Houses the focusable lens and
prevents light from entering
through the eyepiece during use.
Daylight Plate.
Exceptionally durable with a
double-hinge design allowing
even thick samples to be
easily measured.
Rubber Grip.
MODEL
SR6
Calibration Ring.
For rapid calibrations.
Antiroll Stand.
Protects against rolling off
a table.
Scale view.
EACH
SALINITY REFRACTOMETER
Do not dip a refractometer in water, as this will
void the warranty.
Use a dropper and place a few drops on the prism.
The refractometer will provide many years of service
if used this way.
Dry after use otherwise will cause damage to the device.
SALINITY REFRACTOMETER
Here's an economical, automatic temperaturecompensated salinity refractometer, featuring an
automatic temperature correction from 50–86ºF
(10–30ºC) and a dual scale reading 0–100 ppt and
1.000–1.070 specific gravity. Each refractometer
is tested to ensure an accurate instrument.
Six-month warranty. Weighs 0.6 lb.
MODEL
SR5-AQ SALINITY REFRACTOMETER
EACH
$44.99
Dry after use otherwise will cause damage to the device.
Scale view.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
$135.53
WATER QUALITY 251
Salinity Meters
KOI
POCKET SALINITY TESTER
Great for measuring salt levels in koi ponds
SPECIFICATIONS
Range (Salinity)
0 to 10 ppt
This low-range tester is specifically designed for
measuring those difficult low-salt concentrations
in koi ponds. IP67 waterproof. Easy calibration
trimmer is isolated inside the battery
compartment to prevent accidental tampering.
Long-life sensor element is not replaceable.
Includes protective case. 61⁄4" L x 15⁄8" W x 11⁄8" D,
weighs 0.4 lb. Six-month warranty. Calibration
solutions sold separately.
Resolution (Temperature)
0.1
Resolution (Conductivity)
0.1 ppt, 0.01%
MODEL
SWT2-2
EACH
ECOTESTR SALT TESTER
$69.00
SALINITY METER
Resolution (Salinity)
0.1 ppt, 0.01%
Accuracy (Temperature)
±0.5° C
Accuracy (Salinity)
±1.0% full-scale
Temperature compensation
Automatic
Display
LCD
Calibration
1 point
Waterproof
Yes
Power
Four 1.5 V batteries (included)
Battery life
> 200 hours
CE Compliance
Yes
FW
SW
This Pinpoint® salinity meter measures conductivity, giving a digital readout
in mS (millisiemens). The table included will give the corresponding reading
in both specific gravity and salinity to 62 ppt. This meter is temperature
compensated for accuracy of ±4%. Uses one 9V battery (included). Weighs
only 0.6 lb and measures 5.5" L x 3" W.
• Includes probe, 3’ cable, calibrating solution and 9V battery
• Not waterproof, nor water-resistant
MODEL
EACH
SM6
SALINITY METER
PA12
AC ADAPTER
$135.00
12.00
2-YEAR WARRANTY
TECH TALK 28
Measuring Salinity
When culturing saltwater organisms, less than a 10% variation in salinity (±5% or ±2 ppt) is often
required. The measuring methods cover a wide range of cost, convenience and accuracy. Basically,
salinity is the sum of all dissolved ions in the water (not just sodium and chloride), expressed as
parts per thousand (grams per kilogram).
One measurement method is to titrate chlorinity (chloride) and calculate the salinity based on
the assumption that the composition is the same as seawater. Usually titrations are based on
volumes, which can introduce a 2.5% error if not done correctly. This is much more time
consuming than other methods and may be used as a means of checking other techniques.
Density is the basis of the hydrometer measuring method. Salinity can then be determined
from tables based on density (specific gravity) and temperature.
Refractometers are also density based. They provide fast, accurate (±1 ppt) salinity
measurements. Generally, we suggest temperature-compensated models. Cost and care are
the biggest drawbacks. Calibration using certified seawater is best; however, fresh water is
a reasonable alternative for general aquaculture uses.
Electrical conductivity is another method of determining salinity. Conductivity measurements
are best at 25°C and any difference from this requires compensation.
If there is a question about temperature compensation, simply take a reading, change the
temperature of the water by 5 or 10 degrees and measure again.
It should give the same salinity. Some units give readings in millisiemens (mS) and require a
salinity conversion table. Others read directly in salinity. Regular calibration with a standard
solution is recommended.
The information in this Tech Talk was provided by Thomas Frakes, Technical Consultant,
Aquarium Systems, Inc.
Pinpoint® is a registered trademark of Dell Technology DBA American Marine, Inc.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
252 WATER QUALITY
Conductivity/TDS/Salinity/Temp Meter
YSI® PRO30 CONDUCTIVITY/TDS/SALINITY/TEMP METER
The YSI Pro30 is ideal in any field application for the measurement of
conductivity, salinity, TDS (total dissolved solids), and temperature. The Pro30
features user-replaceable cables in lengths up to 30-meters, 50 data set
memory, and a simple calibration routine. True field performance is verified
with the IP-67 waterproof and impact resistant case - drop tested at 1-meter.
Additionally, the YSI super- stable 4-electrode conductivity cell is so reliable it
is built directly into the cable.
• 3-year meter, 2-year cable and sensor warranty
• User-replaceable cables. Conductivity sensor built into cable. Choose among
1-, 4-, 10-, 20-, or 30-meter cables
• Fast cal routine allows easy calibrations with the press of a button.
Remembers the previous calibration values and simply walks you through
the routine
• Stores 50 data sets; no need to write down data
• Graphic, backlit display and glow in the dark keypad
• Tough. IP-67, impact-resistant, waterproof case even without the battery
cover. Rubber over molded case provides extra durability
• Rugged, military spec connectors. Bayonet style with keyed
quarter-turn lock
Cable & Probe
Sold Separately
• Super-stable, weighted 4-electrode conductivity sensor is built in for true
field performance and designed for rugged conditions. Easily cleaned with
a conductivity cleaning brush
• The YSI Pro30 is a great replacement for the YSI 30
MODEL
3-YEAR METER WARRANTY
EACH
Y60530
PRO30 METER ONLY
Y60530-4
PRO30 4M CABLE WITH PROBE
$570.00
Y60530-10
PRO30 10M CABLE WITH PROBE
390.00
Y60530-20
PRO30 20M CABLE WITH PROBE
435.00
Y60530-30
PRO30 30M CABLE WITH PROBE
545.00
Y3167-E
CALIBRATION SOLUTION, 1,000 uS/CM PER PINT (FRESH WATER)
Y3168-E
CALIBRATION SOLUTION, 10,000 uS/CM PER PINT (BRACHISH WATER)
20.00
Y3169-E
CALIBRATION SOLUTION, 50,000 uS/CM PER PINT (SALT WATER)
20.00
330.00
PRO30 INSTRUMENT SPECIFICATIONS
CONDUCTIVITY
SIZE
WEIGHT WITH BATTERIES
POWER
CABLES
WARRANTY
TDS CONSTANT RANGE
CONDUCTIVITY REFERENCE TEMP
SPECIFIC CONDUCTANCE TEMP COMP
DATA MEMORY
LANGUAGES
CERTIFICATIONS
±0.5% OF READING OR 1.0 uS/cm, WHICHEVER GREATER
8.3 cm WIDTH X 21.6 cm LENGTH X 5.7 cm DEPTH (3.25 IN. X 8.5 IN. X 2.25 IN.)
475 GRAMS (1.05 LBS.)
2 ALKALINE C-CELLS PROVIDING 400 HOURS OF BATTERY LIFE; LOW BATTERY INDICATOR ON PRO30
1- 4- 10- 20- AND 30-m LENGTHS (3.28, 13.1, 32.8, 65.6 FT.)
3-YEAR INSTRUMENT; 2-YEAR CABLE AND SENSOR
ADJUSTABLE; 0.3-1.0
ADJUSTABLE; RANGE 15°C TO 25°C
ADJUSTABLE; 0 TO 4%
50 DATA SETS
ENGLISH, SPANISH, GERMAN, FRENCH
ROHS, CE, WEEE, IP-67, 1-METER DROP TEST
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
20.00
253 SECTION
WATER QUALITY 253
Products / Products / Products
pH/ORP/DO/Temperature Meter
YSI® PRO1020 PH/ORP/DO/TEMPERATURE METER
Rugged and reliable, the YSI® Pro1020 provides everything you need in a
handheld instrument for the measurement of either pH or ORP, along with
temperature and dissolved oxygen. The internal barometer, Quick Cal feature,
and simple interface make getting accurate data extremely simple.
• IP67 waterproof rating
• 3-year instrument warranty; 2-year cable
• Quick Cal allows calibrations within minutes
• 50 data-set memory ensures data integrity
• Graphic, backlit display and glow-in-the-dark keypad
• Languages - English, Spanish, French, Portuguese
• Choose either Galvanic or Polarographic DO probes
• Quickest response times, PE cap membranes
• Auto-buffer recognition
3-YEAR METER WARRANTY
MODEL
EACH
METER
Y605120
PRO1020 METER ONLY
$750.00
Y6202
GALVANIC D.O. (INCLUDES MEMBRANE KIT)
$180.00
Y6203
POLAROGRAPHIC D.O. (INCLUDES MEMBRANE KIT)
Y6101
PH ISE
175.00
Y6102
ORP ISE
205.00
Y6103
PH/ORP COMBO ISE (NOT FOR USE ON DUAL ISE CABLES)
295.00
PROBES
Meter, Cable &
Probe Sold
Separately
180.00
CABLES
CALIBRATION SOLUTIONS
CAL4
PH 4.01
$13.35
Y605120-4
4 METER CABLE KIT
CAL7
PH 7.00
13.35
Y605120-10
10 METER CABLE KIT
630.00
20 METER CABLE KIT
720.00
30 METER CABLE KIT
855.00
$60.00
CAL10
PH 10.00
13.35
Y605120-20
Y3167-E
1,000 uS/CM PER PINT (FRESH WATER)
20.00
Y605120-30
Y3168-E
10,000 uS/CM PER PINT (BRACKISH WATER)
20.00
Y3169-E
50,000 uS/CM PER PINT (SALT WATER)
20.00
Y5908
POLAROGRAPHIC
Y3628
ZOBELL ORP TEST
33.00
Y5913
GALVANIC
$580.00
MEMBRANE CAPS
60.00
PRO1020 INSTRUMENT SPECIFICATIONS
TEMPERATURE
PH
ORP
DISSOLVED OXYGEN
(% SATURATION)
RANGE
RESOLUTION
ACCURACY
RANGE
RESOLUTION
ACCURACY
RANGE
RESOLUTION
ACCURACY
RANGE
RESOLUTION
ACCURACY
DISSOLVED OXYGEN
(MG/L) RESOLUTION
RANGE
RESOLUTION
ACCURACY
BAROMETER
RANGE
RESOLUTION
ACCURACY
-5 TO 55°C (0 TO 45°C FOR DO COMPENSATION RANGE FOR MG/L )
0.1°C
0.2°C
0 TO 14 PH UNITS
0.01
±0.2
-1500 TO 1500 MV
1 MV
±20 MV
0 TO 500% AIR SATURATION
0.1% OR 1% AIR SATURATION (USER SELECTABLE)
0 TO 200% AIR SATURATION, ±2% OF THE READING OR ±2% AIR SATURATION,
WHICHEVER IS GREATER; 200 TO 500% AIR SATURATION, ±6% OF THE READING
0 TO 50 MG/L
0.01 OR 0.1 MG/L (USER SELECTABLE)
0 TO 20 MG/L, ±2% OF THE READING OR ±0.2 MG/L, WHICHEVER IS GREATER; 20 TO
50 MG/L, ±6% OF THE READING
500 TO 800 MMHG (MMHG, INHG, MBARS, PSI, KPA)
0.1 MMHG
±5 MM HG WITHIN ±15°C OF CALIBRATION TEMPERATURE
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
254 WATER QUALITY
pH/ORP/Cond/TDS/Salinity Meter
YSI® PRO1030 PH/ORP/CONDUCTIVITY/TDS/SALINITY METER
The YSI Pro1030 provides everything you need in a handheld meter for the
measurement of either pH or ORP along with temperature, conductivity,
specific conductance, salinity and total dissolved solids (TDS).
User-replaceable sensors (pH and ORP sensors) and cables and convenient
calibration routine feature makes it extremely user friendly. Mil-spec (military
spec) connectors, IP67 waterproof and rubber over molded case, and 1-meter
drop tests ensure the instrument remains in your hands to provide years of
sampling even in the harshest field conditions. The feature set of the Pro1030
results in a low total cost of ownership over the life of the product and proves
that it is smarter, tougher, and more versatile.
The super-stable 4-electrode conductivity cell is built into the cable and will
provide years of accurate data. The cells are designed for rugged field
performance and are easily cleaned and require minimal maintenance.
• Smart calibration routine allows easy calibrations with the press of a button,
remembers previous cal values and simply walks you through the calibration
Meter, Cable
& Probe
Sold Separately
• Stores 50 data sets
• Graphic, backlit display and glow in the dark keypad
• Available with 4, 10, 20, or 30-meter cables (cables include cable
management kit)
• View display with polarized sunglasses on
• Multiple languages include English, Spanish, French and Portuguese
• User replaceable pH or ORP sensors and cables
• Conductivity cell built-in
• 3-year instrument; 2-year cable warranty; 1-year pH and ORP sensor
warranty
3-YEAR METER WARRANTY
• YSI Pro1030 replaced YSI 63
• pH auto-buffer recognition
MODEL
EACH
MODEL
$750.00
CAL4
PH 4.01
$13.35
CAL7
PH 7.00
13.35
CAL10
PH 10.00
13.35
Y3167-E
1,000 uS/CM PER PINT (FRESH WATER)
20.00
Y3168-E
10,000 uS/CM PER PINT (BRACKISH WATER)
20.00
Y3169-E
50,000 uS/CM PER PINT (SALT WATER)
20.00
CALIBRATION SOLUTIONS
METERS
Y605130
EACH
PRO1030 METER ONLY
PROBES
Y6101
PH ISE
$175.00
Y6102
ORP ISE
205.00
Y6103
PH/ORP COMBO ISE (NOT FOR USE ON DUAL ISE CABLES)
295.00
CABLES
Y605130-4
4 METER
$480.00
Y605130-10
10 METER
525.00
Y605130-20
20 METER
580.00
Y605130-30
30 METER
700.00
When ordering the Pro1030 you must order the instrument, cable, and pH or ORP sensor separately, allowing
you to choose the system that best fits your application. Conductivity and temperature are part of the cable
you order and included in the cable purchase.
PRO1030 INSTRUMENT SPECIFICATIONS
CABLE LENGTHS
CERTIFICATIONS
CONNECTOR
DATA MEMORY
DIMENSIONS
LANGUAGES
POWER
WARRANTY
WATERPROOF
WEIGHT WITH BATTERIES
CONDUCTIVITY REFERENCE TEMP
SPECIFIC CONDUCTANCE TEMP COMP
1- 4- 10- 20- AND 30-m LENGTHS (3.28, 13.1, 32.8, 65.6, AND 98.4 FT.)
ROHS, CE, WEEE, IP-67, 1-METER DROP TEST
MS (MILITARY SPEC) WATERPROOF WITH BAYONET LOCK
50 DATA SETS
8.3 cm WIDTH X 21.6 cm LENGTH X 5.6 cm DEPTH (3.25 IN X 8.5 IN X 2.21 IN)
ENGLISH, SPANISH, PORTUGUESE, FRENCH
2 ALKALINE C-CELLS PROVIDING APPROXIMATELY 425 HOURS OF BATTERY LIFE DEPENDING WITHOUT
BACKLIGHT USAGE; LOW BATTERY INDICATOR WITH APPROXIMATELY 1 HOUR LEFT
3-YEAR INSTRUMENT; 2-YEAR CABLE; 1-YEAR PH AND ORP SENSORS
IP67 (EVEN WITH THE BATTERY COVER OFF)
475 GRAMS (1.05 LBS)
ADJUSTABLE; RANGE 15°C TO 25°C
0 TO 4%
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 255
DO/Cond/Salinity/TDS/Temp Meter
YSI® PRO2030 DISSOLVED OXYGEN/CONDUCTIVITY/SALINITY/
TDS/TEMP METER
The YSI Pro2030 provides everything you need in a handheld dissolved oxygen
instrument with conductivity. Automatically compensates D.O. readings for
changes in salinity. User-replaceable D.O. sensors and cables, 50 data set
memory and simple D.O. calibration make the Pro2030 user-friendly. Rugged
design and 1-meter drop tests ensure the instrument remains in your hands
to provide years of sampling even in the harshest field conditions. Fast
response times allow you to complete your sampling routine quickly, saving
time and money. Your perfect handheld for brackish water and/or applications
with varying salinity. Instrument has three-year warranty; two years for
cable.
• Choose either polarographic or galvanic D.O./Conductivity sensor built into cable
• Easy calibration within seconds with the press of a button. Automatic
internal barometric pressure compensation
Y6052030
• IP67, impact-resistant, waterproof case even without the battery cover.
Rubber case provides extra durability. Military spec connectors
• Quick response times; 95% D.O. response time in approximately
8 seconds with standard membrane
• Graphic, back-lit display & glow in the dark keypad
• Languages-English, Spanish, French & Portuguese
• Automatic salinity compensation for dissolved oxygen
• YSI Pro1020 is a great replacement for the YSI 85.
MODEL
EACH
Meter, Cable
& Probe
Sold Separately
METER
Y6052030
PRO2030 METER
$755.00
Y6234C
4M, D.O./CONDUCTIVITY/TEMPERATURE
$620.00
Y62310C
10M, D.O./CONDUCTIVITY/TEMPERATURE
680.00
Y62320C
20M, D.O./CONDUCTIVITY/TEMPERATURE
735.00
Y62330C
30M, D.O./CONDUCTIVITY/TEMPERATURE
835.00
CABLES
3-YEAR METER WARRANTY
PROBES
Y6202
GALVANIC D.O.
Y6203
POLAROGRAPHIC D.O.
$180.00
180.00
SYSTEM SPECS (INSTRUMENT, PROBE & CABLE)
D.O. (%)
Sensor Type: Polarographic or Galvanic
Range: 0 to 500% air saturation
Accuracy: 0 to 200% air saturation,
± 2% of the reading or ±2% air
saturation, whichever is greater;
200 to 500% air saturation,
± 6% of the reading
Resolution: 0.1% or 1% air saturation
(user selectable)
D.O. (MG/L)
Sensor Type: Polarographic or Galvanic
Range: 0 to 50 mg/L
Accuracy: 0 to 20 mg/L, ± 2% of the
reading or ±0.2 mg/L, whichever is greater;
20 to 50 mg/L, ± 6% of the reading
Resolution: 0.01 or 0.1 mg/L
(user selectable)
CONDUCTIVITY
(MS, US)
Sensor Type: Four-electrode cell
Range: 0 to 200 mS/cm (auto range)
Accuracy: 1- or 4-m cable, ±1.0% of the reading
or 1.0 uS/cm, whichever is greater 10- 20- or 30-m
cable, ±2.0% of the reading or 1.0 uS/cm,
whichever is greater
Resolution: 0.0001 to 0.1 mS/cm (range dependent)
SALINITY (PPT,
PSU)
Sensor Type: Calculated
Range: 0 to 70 ppt
Accuracy: ±1% of the reading
or 0.1 ppt, whichever is greater
Resolution: 0.01 ppt
TOTAL DISSOLVED SOLIDS
(TDS) (MG/L, G/L)
Sensor Type: Calculated
Range: 0 to 100 g/L TDS constant range
0.30 to 1.00 (0.65 default)
Accuracy: Dependent on temp and
conductivity; calculated from
those parameters
Resolution: 0.001, 0.01, 0.1 g/L
TEMPERATURE
Range: -5 to 55°C (0 to 45°C; DO compensation
range for mg/L)
Accuracy: ±0.2°C
Resolution: 0.1°C
BAROMETER
Range: 500 to 800 mmHg
Accuracy: ±5 mm Hg within
± 15°C temperature range
from calibration point
Resolution: 0.1 mmHg
YSI® is a registered trademark of YSI, Inc.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
256 WATER QUALITY
Multiparameter
YSI® PRO PLUS MULTIPARAMETER METER
Measure up to 11 different parameters with one meter and only a simple cable
change! Meter has a backlit display and keypad, graphic display with detailed
messages and instructions plus a gauge that continuously shows the battery
level. The rubber over-molded case has an IP67 waterproof rating and is
drop rated to 1 meter. Instrument can log data (5,000 data-set memory with
site identity and GLP event logging) and download it to a PC. Data Manager
desktop software, a communication dock and USB cable are included.
Meter measures 3.3" x 8.5" x 2.3", weighs 1 lb. Uses 2 C batteries (included).
Three year warranty on meters, two years on cables and one year on probes
(six-month warranty on ammonium, chloride and nitrate ISEs).
• Measure combinations of D.O., temperature, pH, conductivity, salinity, TDS,
ORP, ammonium, nitrate, chloride and barometric pressure
Meter, Cable
and Probe
Sold Separately
• Automatic temperature, salinity and barometric pressure compensation
PRO PLUS KITS
Choose the kit that best meets your needs. Kits include Pro Plus instrument, 4
meter cable, choice of pH or pH/ORP probe, and carrying case.
QUATRO CABLE KIT
The Quatro cable holds four user-replaceable Professional Series sensors
for temperature/conductivity, D.O. and your choice of any two ISEs (pH, ORP,
ammonium, nitrate, or chloride). Ammonia (NH3) can be measured if
ammonium (NH4) and pH sensor is installed. Kit does not include D.O. and ISE
probes.
Y60500
3-YEAR
METER WARRANTY
PRO PLUS KITS
MODEL
Y603190
METER, 4M CABLE, Ph PROBE & CARRYING CASE
Y603223
METER, 4M CABLE, PH/ORP PROBE & CARRYING CASE
EACH
Y6104
AMMONIUM ISE (FRESH WATER ONLY)
3,260.00
Y6105
CHLORIDE ISE (FRESH WATER ONLY)
360.00
Y6106
NITRATE ISE (FRESH WATER ONLY)
360.00
PH 4.01
$13.35
CAL7
PH 7.00
13.35
CAL10
PH 10.00
13.35
PRO PLUS METER ONLY
PRO PLUS MULTIPARAMETER METER
EACH
$3,060.00
MODEL
Y60500
PROBES (Continued)
MODEL
EACH
$1,220.00
SOLUTIONS
MODEL
CAL4
CABLES
MODEL
EACH
$360.00
EACH
Y614C
4 METER FOR ISE/TEMP
$260.00
Y624C
4 METER FOR DO/TEMP
265.00
Y3167-E
1,000 uS/CM PER PINT (FRESH WATER)
20.00
20.00
Y634C
4 METER FOR COND/TEMP
330.00
Y3168-E
10,000 uS/CM PER PINT (BRACKISH WATER)
Y6114C
4 METER FOR ISE/ISE/TEMP
580.00
Y3169-E
50,000 uS/CM PER PINT (SALT WATER)
20.00
Y6124C
4 METER FOR ISE/DO/TEMP
580.00
Y3628
ZOBELL ORP TEST
33.00
Y6134C
4 METER FOR ISE/COND/TEMP
480.00
Y3841
AMMONIUM STANDARD 1MG/L (500ML)
82.00
Y6234C
4 METER FOR DO/COND/TEMP
630.00
Y3842
AMMONIUM STANDARD 10MG/L (500ML)
82.00
Y57904
QUATRO CABLE KIT
82.00
1,325.00
PROBES
MODEL
EACH
AMMONIUM STANDARD 100MG/L (500ML)
NITRATE STANDARD 1MG/L (500ML)
82.00
Y3886
NITRATE STANDARD 10MG/L (500ML)
82.00
Y3887
NITRATE STANDARD 100MG/L (500ML)
82.00
Y6202
GALVANIC DO (INCLUDES MEMBRANE KIT)
Y6203
POLAROGRAPHIC DO (INCLUDES MEMBRANE KIT)
180.00
Y6101
PH ISE
175.00
MODEL
Y6102
ORP ISE
205.00
Y603075
Y6103
PH/ORP COMBO ISE (NOT FOR USE ON DUAL ISE CABLES)
295.00
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
$180.00
Y3843
Y3885
CARRYING CASE
SOFT SIDED CARRYING CASE
EACH
$125.00
WATER SECTION
QUALITY 257
Products / Products
Multiparameter
/ Products
YSI® PRO PLUS MULTIPARAMETER METER SPECIFICATIONS
Auto Stable
User defined auto-stable function holds stable readings on display when criteria is met
Barometer
Built-in barometer Buffer Recognition Auto buffer recognition for US and NIST buffers
Certifications
RoHS, CE, WEEE, C-Tick, VCCI, FCC, IP-67, 1-meter drop test, Assembled in USA
Connectivity
USB 2.0; ProComm II communications saddle and USB cable included; user-upgradeable software via USB
and website
Connector
MS (military spec) waterproof with bayonet lock
Data Management
Data Manager desktop software included; 100 user-defined folders and site names
Data Memory
5,000 data sets (data, date, time, user-defined info); 100 GLP files
Dimensions
8.3 cm width x 21.6 cm length x 5.6 cm depth (3.25 in x 8.5 in x 2.21 in)
Display
Graphic display with detailed Help; backlit display AND keypad
DO Membrane Response Times
1.25 mil PE = 8 seconds and 6 in/sec flow
(T95; 100%-0) and Flow
2.0 mil PE = 17 seconds and 3 in/sec flow
Dependence
1 mil Polytetrafluoroethylene (PTFE) = 18 seconds and 12 in/sec flow
DO Sensors
Polarographic or galvanic field sensors; self-stirring polarographic BOD sensor for the lab
Field Cables
Standard lengths of 1, 4, 10, 20, or 30 meters - up to 100 meters on DO only cables;
all 4-meter and longer cables include a cable management kit
Flow Cell
Single, dual and multiparameter Quatro cable all flow cell compatible
GLP Compliance
Yes; detailed GLP information is stored and is available to view, download or print
Lab Cables
BOD sensor includes 2-meter cable; 1 or 4 meters on lab pH, ORP and pH/ORP cables
Languages
English, Spanish, German, French, Italian, Norwegian, Portuguese, Japanese, Chinese
(Simplified & Traditional)
Logging Modes
Single or Continuous
Operating Temperature
-10 to 60 °C
Power
Storage Temperature
2 alkaline C-cells provide 80 continuous hours at ambient temperature without backlight;
ProComm II saddle provides USB power or optional wall power, cigarette lighter, and
universal cell phone charger options
-20 to 70 °C
User ID
Optional user ID for data security
Warranty
3-year instrument; 2-year field cables
Waterproof
IP-67 (even with the battery cover off); floats
Weight with Batteries
475 grams (1.05 lbs)
SYSTEM SPECS (INSTRUMENT, PROBE & CABLE)
DISSOLVED OXYGEN
(% SATURATION)
Range: 0–500% air saturation
Accuracy: ±2% of the reading or ±2%
air saturation
Resolution: 1% or 0.1% air saturation
DISSOLVED OXYGEN (MG/L)
Range: 0–50 mg/L
Accuracy: ±2% of the reading or ± 0.2 mg/L
Resolution: 0.1 or 0.01 mg/L
TEMPERATURE
Range: -5–100ºC (D.O. compensation range -5–45ºC)
Accuracy: ± 0.2ºC (-5–70ºC), ± 0.3ºC (70 to 100ºC)
Resolution: 0.1°C
CONDUCTIVITY
Range: 0–200 mS/cm
Accuracy: ± 0.5% of reading or ± 0.001
mS/cm (4-meter cable); ±1% of reading
or ± 0.001 mS/cm (20-meter cable)
Resolution: 0.001–0.1 mS/cm
(Range-dependent)
SALINITY
Range: 0–70 ppt
Accuracy: ±1% of reading or ± 0.1 ppt
Resolution: 0.01 ppt
PH
Range: 0–14 units
Accuracy: ± 0.2 units
Resolution: 0.01 units
ISE
Range: -1,999–1,999 mV
Accuracy: ±20 mV
Resolution: 0.1 mV
TOTAL DISSOLVED SOLIDS
Total Dissolved Solids
Calculated from conductivity (variable
constant, default .65)
Range: 0–100 g/L
Resolution: 4 digits
BAROMETER
Range: 375–825 mmHg
Accuracy: ±3 mmHg (within ±15°C of calibration temp)
Resolution: 0.1 mmHg
Units: mmHg, inHg, kPa
AMMONIUM
Range: 0 to 200 mg/L-N, 0 to 30°C
Accuracy: ±10% of reading or 2 mg/L-N,
whichever is greater
Resolution: 0.01 mg/L
NITRATE
Range: 0 to 200 mg/L-N, 0 to 30°C
Accuracy: ±10% of reading or 2 mg/L-N,
whichever is greater
Resolution: 0.01 mg/L
CHLORIDE
Range: 0 to 1000 mg/L,0 to 40 °C
Accuracy: ±15% of reading or 5 mg/L,
whichever is greater
Resolution: 0.01 mg/L
(ammonia with pH
sensor)
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
258 WATER QUALITY
Multiparameter
NEW!
YSI® ProDSS MULTIPARAMETER FIELD SAMPLING INSTRUMENT
The ProDSS Portable Digital Sampling System is designed for use in demanding field applications
such as surface water, groundwater, and aquaculture. The rugged and reliable ProDSS allows for
measurement of up to 17 parameters. The ProDSS features user-replaceable digital smart
sensors that are automatically recognized by the instrument when connected. A backlit color
display, large memory, convenient calibration procedures, rechargeable battery, and powerful PC
data management program (KorDSS) make the ProDSS user friendly. The optional GPS function,
wide range of sensors, and varying cable lengths allow for complete customization of the ProDSS.
Mil-spec (military spec) connectors and a waterproof (IP-67), rubber over-molded case ensures
durability to provide years of sampling even in the harshest field conditions. 3-year meter
warranty; 2 year cable warranty (sensor warranties vary).
Instrument
Includes a rechargeable lithium-ion battery (pre-installed), hand strap, USB cable for charging the
ProDSS battery and for connection to a PC, AC charger, cable for connection to a USB memory
stick, ProDSS quick start guide, USB software memory stick and digital manual.
Cables
Cables do not include an integrated temperature sensor. All cables include 4 universal sensor
ports and a maintenance kit (3 port plugs, tube of Krytox® lubricant, brush for conductivity probe,
syringe for depth sensor, and sensor installation/removal tool). A 1 lb. weight is included with all
cables 10 meters and longer while 10, 20, and 30 meter cables include a cable management kit.
Probes
Meter, Cable &
Probe Sold
Separately
A conductivity/temperature probe must be installed in a ProDSS cable for accurate
measurement of all parameters. All probes, including conductivity/temperature, must be
ordered separately.
Features:
• Measures pH, ORP, dissolved oxygen (optical-based sensor), conductivity, turbidity,
temperature, depth and more.
• Digital smart sensors are automatically recognized by the instrument and store calibration data
3 YEAR METER WARRANTY
• User-replaceable cables and sensors
• KorDSS desktop software (included) and USB on-the-go connector assist with data
management
• Rechargeable lithium-ion battery
• Color display and backlit keypad; menu-driven operation
• Long-life lithium-ion battery; ensures reliability and minimizes waste
• Optional GPS, used with KorDSS for Geolocation and visualization of data
• Optional depth sensor and up to 100-m cable lengths – great for profiling applications
• Large memory (>100,000 data sets) with extensive site list capabilities
• Multiple languages: English, Spanish, Portuguese, French, German, Italian, Japanese,
Norwegian, and Chinese
• Military spec connectors, waterproof IP67 rating and rubber over-molded case
MODEL
EACH
MODEL
EACH
Cables with Probe (Continued)
Meter only
Y626870-1
PRODSS METER WITHOUT GPS
Y626870-2
PRODSS METER WITH GPS
$1,600.00
2,100.00
Cables with Probe
Y626909-1
1M, 4 SENSOR PORTS - NO DEPTH SENSOR
Y626909-4
4M, 4 SENSOR PORTS - NO DEPTH SENSOR
Y626909-10 10M, 4 SENSOR PORTS - NO DEPTH SENSOR
$1,720.00
1,770.00
1,820.00
Y626909-20 20M, 4 SENSOR PORTS - NO DEPTH SENSOR
1,930.00
Y626909-30 30M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,030.00
Y626909-40 40M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,130.00
Y626909-50 50M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,230.00
Y626910-4
4M, 4 SENSOR PORTS - WITH DEPTH SENSOR
Y626910-10 10M, 4 SENSOR PORTS - WITH DEPTH SENSOR
2,570.00
Y626911-20 20M, 4 SENSOR PORTS - WITH DEPTH SENSOR
2,680.00
Y626911-30 30M, 4 SENSOR PORTS - WITH DEPTH SENSOR
2,780.00
Y626911-40 40M, 4 SENSOR PORTS - WITH DEPTH SENSOR
2,880.00
Y626911-50 50M, 4 SENSOR PORTS - WITH DEPTH SENSOR
2,980.00
Y626911-60 60M, 4 SENSOR PORTS - WITH DEPTH SENSOR
3,080.00
Y626911-70 70M, 4 SENSOR PORTS - WITH DEPTH SENSOR
3,180.00
Y626911-80 80M, 4 SENSOR PORTS - WITH DEPTH SENSOR
3,280.00
Y626911-90 90M, 4 SENSOR PORTS - WITH DEPTH SENSOR
3,380.00
Y626911-100 100M, 4 SENSOR PORTS - WITH DEPTH SENSOR
3,480.00
Y626909-60 60M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,330.00
Y626909-70 70M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,430.00
Probes
Y626909-80 80M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,530.00
Y626900
OPTICAL DISSOLVED OXYGEN (ODO)
Y626909-90 90M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,630.00
Y626901
TURBIDITY
Y626909-100 100M, 4 SENSOR PORTS - NO DEPTH SENSOR
2,730.00
Y626902
CONDUCTIVITY AND TEMPERATURE
Y626910-1
2,470.00
Y626903
PH WITH MODULE
1M, 4 SENSOR PORTS - WITH DEPTH SENSOR
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
$2,520.00
$1,000.00
700.00
1,100.00
450.00
WATER QUALITY 259
Multiparameter
MODEL
EACH
Probes (Continued)
MODEL
EACH
Solutions (Continued)
Y626904
PH/ORP WITH MODULE
575.00
CAL 4
PH 4.01
13.35
Y626905
NITRATE WITH MODULE
575.00
CAL 7
PH 7.00
13.35
Y626906
AMMONIUM WITH MODULE
575.00
CAL 10
PH 10.00
13.35
Y626907
CHLORIDE WITH MODULE
575.00
Accessories
Replacement Modules
Y603075
SOFT SIDED CARRYING CASE, LARGE
$170.00
Y626945
HARD SIDED CARRYING CASE, SMALL (1 & 4M)
270.00
PH/ORP
250.00
Y626946
HARD SIDED CARRYING CASE, LARGE
350.00
Y626965
NITRATE
270.00
Y603070
SHOULDER STRAP
31.00
Y626966
AMMONIUM
270.00
Y603069
BELT CLIP
28.00
Y626967
CHLORIDE
270.00
Y626943
EXTERNAL RECHARGE. LI-ION BATTERY PACK, SMALL
50.00
Y626944
EXTERNAL RECHARGE. LI-ION BATTERY PACK, LARGE
80.00
Y626942
USB CAR CHARGER, 12VDC
Y599080
FLOW CELL
Y603056
FLOW CELL MOUNTING SPIKE
30.00
Y626918
WEIGHT, 1 LB
75.00
Y605978
WEIGHT, 4.9 OZ.
27.00
Y626963
PH
Y626964
Solutions
Y3167-E
1,000 US/CM PER PINT (FRESH WATER)
$20.00
Y3168-E
10,000 US/CM PER PINT (BRACKISH WATER)
20.00
Y3169-E
50,000 US/CM PER PINT (SALT WATER)
20.00
Y3628
ZOBELL ORP TEST
33.00
$125.00
20.00
280.00
SYSTEM SPECS (INSTRUMENT, PROBE & CABLE)
TEMPERATURE
Range: -5 to 70 °C (temperature compensation range for DO mg/L
measurement: -5 to 50 °C )
Accuracy: ±0.2 °C
Resolution: 0.1 °C or 0.1 °F (user selectable)
Units: °C, °F, K
pH
Range: 0 to 14 pH units
Accuracy: ±0.2 pH units
Resolution: 0.01 pH units
Units: pH, pH mV
ORP
Range: -1999 to 1999 mV
Accuracy: ±20 mV
Resolution: 0.1 mV
Units: mV
DISSOLVED OXYGEN
Range: 0 to 500%, 0 to 50 mg/L
Accuracy: 0 to 200%: ±1% of reading or 1% saturation, whichever is greater
200 to 500%: ±8% of reading | 0 to 20 mg/L: ±0.1 mg/L or 1% of reading,
whichever is greater | 20 to 50 mg/L: ±8% of reading
Resolution: 0.01 mg/L and 0.1%, or 0.1 mg/L and 1% (user selectable)
Units: % saturation, % saturation local, mg/L, ppm
BAROMETER
Range: 375 to 825 mmHg
Accuracy: ±1.5 mmHg from 0 to 50 °C
Resolution: 0.1 mmHg
Units: mmHg, inHg, mbar, psi, kPa,
atm
CONDUCTIVITY**
Range: 0 to 200 mS/cm
Accuracy: 0 - 100 mS/cm:
±0.5% of reading or .001 mS/
cm, whichever is greater | 100 200 mS/cm: ±1.0% of reading
Resolution: 0.001, 0.01 or 0.1 μS/
cm (range dependent)
Units: μS/cm, mS/cm
SPECIFIC
CONDUCTANCE*
Range: 0 to 200 mS/cm
Accuracy: 0 - 100 mS/cm: ±0.5% of reading or .001 mS/cm, whichever is
greater | 100 - 200 mS/cm: ±1.0% of reading. User selectable reference
temperature (15 to 25 °C; default 25 °C) and compensation coefficient (0 to
4%/°C; default 1.91%)
Resolution: 0.001, 0.01, 0.1 mS/cm
Units: μS/cm or mS/cm
SALINITY*
Range: 0 to 70 ppt
Accuracy: ±1.0% of reading or ±0.1
ppt, whichever is greater
Resolution: 0.01 ppt
Units: ppt or PSU
TOTAL
DISSOLVED
SOLIDS*
Range: 0 to 100 g/L
Accuracy: Calculated from
specific conductance and a
user-selectable TDS multiplier
(0.30 to 1.00; default 0.65)
Resolution: 0.001, 0.01, 0.1 g/L
Units: mg/L, g/L, kg/L
SEAWATER DENSITY*
Range: 0.0 to 50.0 sigma, sigma T
Accuracy: —
Resolution: 0.1 sigma or sigma T
Units: Sigma, Sigma T
TURBIDITY
Range: 0 to 4000 FNU
Accuracy: 0 to 999 FNU: 0.3 FNU or
±2% of reading, whichever is greater
1000 to 4000 FNU: ±5% of reading
Resolution: 0.1 FNU
Units: FNU, NTU
TOTAL
SUSPENDED
SOLIDS*
Range: 0 to 30000 mg/L
Accuracy: User correlated from
turbidity field measurements
and labTSS measurements from
grab samples
Resolution: 0.01, 0.1 mg/L
Units: mg/L
AMMONIUM***/****
Range: 0 to 200 mg/L NH4-N
Accuracy: ±10% of reading or 2 mg/L, whichever is greater
Resolution: 0.01 mg/L
Units: NH4-N mg/L, NH4-N mV
CHLORIDE***
Range: 0 to 18000 mg/L Cl
Accuracy: ±15% of reading or 5 mg/L,
whichever is greater
Resolution: 0.01 mg/L
Units: Cl mg/L, Cl mV
NITRATE***
Range: 0 to 200 mg/L NO3-N
Accuracy: ±10% of reading or 2
mg/L, whichever is greater
Resolution: 0.01 mg/L
Units: NO3-N mg/L, NO3-N mV
SEAWATER DENSITY*
Range: 0 to 328 feet (0 to 100 m)
Accuracy: ±0.013 ft (±0.004 m) for 1, 4, and 10 m cables
±0.13 ft (±0.04 m) for cables 20 m and longer
Resolution: 0.001 m or 0.01 ft
Units: m, ft
*Derived/calculated parameter **Resistivity can be calculated with the conductivity sensor ***ISEs for freshwater only; 20 meter maximum depth
****Ammonia can be calculated and reported from ammonium, temperature, salinity, and pH.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
260 WATER QUALITY
Photometer
YSI® PHOTOMETERS
FW
SW
YSI photometers are sophisticated water quality analysis systems that measure a variety of parameters
and provide simple on-screen instructions. Results are available within seconds. IP67-rated waterproof
systems use easy-to-use reagent tablets for testing instead of liquids or powder packets. Reagent
tablets have an indefinite shelf life when stored in their foil pouches.
5.8" L x 10.8" W x 3" H, ship weight 7 lbs.
®
The Y9300 photometer includes carrying case, light cap, 8 test tubes, dilution tube, 10 crush rods,
cleaning brush and instruction manual. Also has backlit graphic display, self-adjusting sample tube
holder and on-screen instructions in multiple languages.
The Y9500 includes all the above plus a waterproof USB connection, internal memory that holds up to
500 sample sets and a number of user-selectable options such as test units, sample number and dilution
factors.
MODEL
EACH
Y9300
YSI PHOTOMETER
Y9500
PHOTOMETER W/USB CONNECTION
$1,070.00
1,380.00
Y9500
Can’t find what you’re looking for? See it all at PentairAES.com.
YSI® PHOTOMETER REAGENTS
TEST KITS
RANGE
MG/L
MODEL
ALKALINITY-M (ALKAPHOT M)
0-500
YPM250
STARTER KITS
# TESTS
EACH
MODEL
REPLACEMENT REAGENTS
# TESTS
50
$35.00
YAP250
250
EACH
$87.00
ALKALINITY-P (ALKAPHOT P)
0-500
YPM251
50
36.00
YAP251
250
87.00
ALKALINITY-TOTAL
0-500
YPM188
50
37.00
YAP188
250
79.00
103.00
ALUMINUM
0-0.5
YPM166*
50
39.00
YAP166*
250
AMMONIA
0-1.0
YPM152
50
52.00
YAP152
250
87.00
BROMINE
0-10.0
YPM060
50
34.00
YAP060
250
30.50
CALCIUM HARDNESS
0-500
YPM252*
50
37.00
YAP252*
250
90.00
CHLORIDE (CHLORIDOL)
0-50
YPM268
50
46.00
YAP268
250
110.00
CHLORINE HR
0-250
YPM162*
50
35.00
YAP162*
250
110.00
CHLORINE DPD 1 (FREE)
0-5.0
YPM011
50
12.00
YAP011
250
34.00
CHLORINE DPD 2 (MONO & DICHL.)**
0-5.0
YPM021
50
15.00
YAP021
250
38.00
CHLORINE DPD 1&3 (FREE, COMBINED & TOTAL)
0.5.0
YPM031
50
25.00
YAP031
250
56.00
CHROMIUM VI (HEXAVALENT)
0-1.0
YPM281
50
57.00
YAP281
250
141.00
COPPER (COPPERCOL) (FREE, COMBINED & TOTAL)
0-5.0
YPM186
50
60.00
YAP186
250
156.00
CYANURIC ACID
0-200
YPM087
50
29.00
YAP087
250
65.00
FLUORIDE
0-1.5
YPM179
50
49.00
YAP179
200
113.00
HARDNESS (HARDICOL)
0-500
YPM254
50
43.00
YAP254
250
103.00
HYDROGEN PEROXIDE LR
0-2.0
YPM104
50
24.50
YAP104
250
54.00
HYDROGEN PEROXIDE HR
0-100
YPM105
50
32.00
YAP105
250
98.00
IRON LR
0-1.0
YPM155
50
28.50
YAP155
250
120.00
IRON HR
0-10
YPM156*
50
28.50
YAP156*
250
57.00
MAGNESIUM (MAGNECOL)
0-100
YPM193*
50
43.00
YAP193*
250
77.00
103.00
MANGANESE
0-0.03
YPM173
50
44.00
YAP173
250
MOLYBDATE HR
0-100
YPM175
50
43.00
YAP175
250
110.00
NITRATE
0-20
YPM163
50
59.00
YAP163
200
152.00
NITRITE (N)
NITRITE (NANO₂)
0-0.5
YPM109
50
24.50
YAP109
250
61.00
0-1,500
YPM260
50
41.00
YAP260
250
92.00
221.00
ORGANOPHOSPHONATE (OP)
0-20
YPM262
50
93.00
YAP262
250
OZONE
0-2.0
YPM056
50
59.00
YAP056
250
52.00
6.8-8.4
YPM130
50
18.00
YAP130
250
32.00
107.00
PH (PHENOL RED)
PHOSPHATE LR
0-4.0
YPM177
50
32.00
YAP177
200
PHOSPHATE HR
0-100
YPM114
50
44.00
YAP114
250
97.00
POTASSIUM
0-12
YPM189
50
44.00
YAP189
250
97.00
SILICA
0-4.0
YPM181
50
55.00
YAP181
200
129.00
SULFATE
0-200
YPM154
50
21.50
YAP154
250
44.00
SULFITE
0-500
YPM266
50
39.00
YAP266
250
89.00
ZINC
0-4.0
YPM148*
50
56.00
YAP148*
250
148.00
*Not recommended for saltwater testing. **Requires YPM031
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
YSI® is a registered trademark of YSI, Inc.
WATER QUALITY 261
Colorimeter
SMART3 COLORIMETER
SYSTEM SPECS
RANGE
0–125% T
RESOLUTION
1% FS
ACCURACY
2% FS
2-YEAR WARRANTY
SMART3 COLORIMETER
2
SW
Ideal for water analysis in the field or in the lab. Easy to use software allows
the analyst to choose a test factor from over 80 preprogrammed calibrations
for LaMotte reagent systems. The reacted sample is always scanned at the
optimum wavelength which is automatically selected from the multiple LED
optical system and the test result is presented on the large, backlit display.
The test result is displayed directly in units of concentration, as well as
Absorbance and %T, in one of seven languages. The analyst also has the
option of entering up to 25 additional calibrations for analysis with custom
reagent systems. Test factors can be arranged in any of three sequences that
can be modifi ed at any time to meet changing testing needs. The data logger
holds up to 500 time and date stamped data points. A USB connection allows
an interface of the colorimeter with a computer for real-time data acquisition
and data transfer. 7.5” L x 3.5” W x 2.5” H. Visit PentairAES.com for more Reagents.
Features
SHIP WT
(LBS)
MODEL
LM1910
LM1910
FW
EACH
$999.00
ACCESSORIES/REPLACEMENT ITEMS
• Large graphical liquid crystal
display
• IP67 Waterproof
• Simple, menu-driven operation
• 25 User tests
• Over 80 pre-programmed tests
LM1910CD
SMARTLINK 3 PROGRAM CD
69.00
0290-6
TEST TUBES WITH CAPS (6)
27.85
• Data logger for 500 data points
• Lithium ion rechargeable battery
or computer/wall adapter
Can’t find what you’re looking for? See it all at PentairAES.com.
SMART3 REAGENT SYSTEMS
Reagents are designed to avoid test interferences, making results fast and dependable. Shipping weight is 1 lb for each reagent.
RANGE*
MODEL
TEST FACTOR
TEST METHOD (# OF REAGENTS)
(PPM)
LM3659SC
AMMONIA NITROGEN (FRESH WATER)
AMMONIA NITROGEN (SALT WATER)
SALICYLATE (3)
0.05 - 1.00
0.10 - 1.00
LM3642SC
AMMONIA NITROGEN HR
NESSLERIZATION (2)
LM3643SC
BROMINE LR
CHLORINE (FREE & TOTAL)
IODINE
DPD TABLETS (2)
DPD TABLETS (3)
DPD TABLETS (2)
LM3644SC
CHLORINE DIOXIDE
LM3640SC
COPPER BCA - LR
LM3646SC
COPPER DDC
LM3660SC
CYANIDE
LM3688SC
DISSOLVED OXYGEN (DO)
# OF TESTS
EACH
25
$50.60
0.05 - 4.00
100
43.25
0.10-9.00
0.03-4.00
0.20-14.00
100
57.75
DPD TABLET/GLYCINE (2)
0.06-8.00
100
36.10
BICINCHONINIC ACID (1)
0.04 - 3.50
50
28.85
DIETHYLDITHIOCARBAMATE (1)
0.10 - 6.00
100
17.90
PYRIDINE-BARBITURIC ACID (5)
0.03 - 0.35
50
104.10
WINKLER COLORIMETRIC (3)
0.60-11.00
200
42.35
LM3647SC
FLUORIDE
SPADNS (2)
0.10-2.00
50
51.40
LM3662SC
HYDROGEN PEROXIDE LR
DPD (2)
0.02-1.50
100
43.00
42.30
LM3648SC
IRON
BIPYRIDYL (2)
0.10-6.00
50
LM3668SC
IRON - PHENANTHROLINE
1,10 PHENANTHROLINE (2)
0.10-5.00
50
47.05
LM3658SC
MANGANESE LR
PAN (3)
0.01-0.70
50
63.50
60.05
LM369901SC
MOLYBDENUM HR
THIOGLYCOLATE (3)
0.60-50.00
50
LM3649SC
NITRATE NITROGEN LR
CADMIUM REDUCTION (2)
0.10-3.00
20
47.30
LM3650SC
NITRITE NITROGEN LR
DIAZOTIZATION (2)
0.02-0.80
20
47.30
LM3700SC
pH CPR
pH PR
pH TB
CHLOROPHENOL RED (1)
PHENOL RED (1)
THYMOL BLUE (1)
pH 5.00-6.80
pH 6.60-8.40
pH 8.00-9.50
100
53.30
LM3653SC
PHOSPHATE LR
ASCORBIC ACID REDUCTION (2)
0.05-3.00
50
40.00
LM3655SC
PHOSPHATE HR
VANADOMOLYBDOPHOSPHORIC ACID (1)
0.50-70.00
50
23.00
LM3639SC
POTASSIUM
TETRAPHENYLBORON (2)
0.80-10.00
100
62.00
LM3664SC
SILICA LR
HETEROPOLY BLUE (4)
0.05-4.00
100
58.70
LM3687SC
SILICA HR
SILICOMOLYBDATE (3)
1.00-75.00
50
44.05
LM3665SC
SULFATE HR
BARIUM CHLORIDE (1)
3.00-100.00
100
30.90
LM3654SC
SULFIDE LR
METHYLENE BLUE (3)
0.06-1.50
50
69.30
LM3666SC
TANNIN
TUNGSTO-MOLYBDOPHOSPHORIC ACID (2)
0.10-10.00
50
54.70
LM3667SC
ZINC LR
ZINCON (6)
0.05-3.00
50
117.05
*Range may be extended by dilution in most cases.
SMART Colorimeter® and LaMotte® are registered trademarks of LaMotte Chemical Products Co.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
262 WATER QUALITY
Analytical Aqualab
PENTAIR ANALYTICAL AQUALAB
Aqualab is the flagship of the Analyzer range. Configurable parameter analysis
and telemetry options provide Aqualab with the ability to solve various
monitoring questions. This analyzer offers a single system capable of providing
data for a wide range of monitoring needs.
The Analytical Aqualab is a configurable analyzer allowing you to select
the appropriate chemistry package for your application from wastewater
to environmental monitoring.
Aqualab can be configured to perform any selection of physical parameters
(pH, electrical conductivity, dissolved oxygen, turbidity, temperature and
ORP) and nutrient parameters (total reactive phosphorus, nitrate, ammonia
and ammonium).
The Aqualab analytical system is housed in a weatherproof IP54 cabinet.
The cabinet also houses the communication and control electronics along
with reagent and standard solution storage bottles.
CALL FOR MORE INFORMATION AND PRICING.
SPECIFICATIONS
ENCLOSURE
DIMENSIONS
CABINET WEIGHT
PROCESSOR
DATA STORAGE
DISPLAY
CALIBRATION
SAMPLE FLOW RATE
AMBIENT CONDITIONS
IP54
365 X 400 X 430 CM (W X H X D)
75 KG
80C188
1 MB TOTAL
491K FOR DATA STORAGE
OPTIONAL BACKLIT LCD
USER DEFINABLE
20-60 L/MIN
5-50°C
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
POWER AVERAGE
VOLTAGE
ALARMS
SAMPLER OUTPUT
OUTPUT
EXTERNAL INPUTS
SCHEDULING
COMMUNICATIONS
INTERROGATION
SOFTWARE
15.6VA
85-264 VAC
SYSTEM AND SAMPLE
OPTIONAL
4-20 MA OR SDI-12 OPTIONAL
UP TO 8 X 4–20 MA
25 USER DEFINED SCHEDULES
LANDLINE, GSM OR SATELLITE
RS232
ANALYZER 32/AQUAGRAPH
WATER SECTION
QUALITY 263
Products
Analytical
/ Products
Mini-Analyzer
/ Products
PENTAIR ANALYTICAL MINI-ANALYZER
The Mini-Analyzer, Pentair’s newest and smallest analyzer can provide
a tailored solution to your specific monitoring needs. Designed specifically
to suit certain monitoring situations such as environmental monitoring,
industrial discharge or single point of source monitoring, you’re sure to find
a configuration of the Mini-Analyzer that is ready to take on your specific
monitoring task.
Designed to be either wall, trailer or bench-top mounted, this compact
analyzer is the solution for continuous unattended analysis and is packed
with additional features.
Mini-Analyzer Configurations
The Mini-Analyzer can be configured one of three ways:
Physicals: Configured to perform pH, electrical conductivity, dissolved oxygen,
turbidity, temperature and ORP analysis.
Nutrients: Configured to perform total reactive phosphorus, nitrate, ammonia
or ammonium.
Single Channel: Can be configured to perform single analysis of any one of the
following: total reactive phosphorus, nitrate, ammonia or ammonium.
CALL FOR MORE INFORMATION AND PRICING.
SPECIFICATIONS
ENCLOSURE
DIMENSIONS
WEIGHT
PROCESSOR
DATA STORAGE
DISPLAY
CALIBRATION
SAMPLE FLOW RATE
AMBIENT CONDITIONS
POWER AVERAGE
IP54
365 X 400 X 430 CM (WXHXD)
25 KG
80C188
1 MB TOTAL, 491K FOR DATA STORAGE
OPTIONAL BACKLIT LCD
USER DEFINABLE
20–60 L/MIN
5–50°C
15.6VA
VOLTAGE
ALARMS
SAMPLER OUTPUT
OUTPUT
EXTERNAL INPUTS
SCHEDULING
COMMUNICATIONS
INTERROGATION
SOFTWARE
85-264 VAC
SYSTEM AND SAMPLE
OPTIONAL
4-20 MA OR SDI-12 OPTIONAL
UP TO 8 X 4–20 MA
25 USER DEFINED SCHEDULES
LANDLINE, GSM OR SATELLITE
RS232
ANALYZER 32/AQUAGRAPH
TECH TALK 131
Titration
Ammonia is the primary waste byproduct of protein consumption, and is excreted across fish gills as
Titration is a commonly placed wet laboratory chemical analysis method. This method uses a reagent
titrant to find a concentration of an unknown in a given volume of a sample. Most aquaculture test
kits that use titration as a method of testing show results by means of an endpoint. The endpoint is
measured by a change in color due to the use of an indicator. A sample solution with the indicator will
begin one color before the use of the titrator is added. With the addition of the titrator, neutralization
or EDTA-complexing occurs, while the sample solution gradually changes color until the color no
longer changes. When the color no longer changes, the endpoint is reached and the concentration can
be calculated. Common test kits in aquaculture that use titration as a method of testing are
alkalinity, pH, mineral hardness and dissolved oxygen.
Testing in this manner relies on sample volume and end point recognition. Titration can be a very
reliable way to test. This type of test can be verified with the use of a standard known solution.
The reagents can be susceptible to freezing, heating or evaporation. Since the test can be verified
with a standard, titration test kits are a great investment.
Alkalinity and pH test kits use acid-base titration with the use of indicators to reach an endpoint.
The indicators used in these test change color when the solution is neutralized by an acid at a
known concentration. Different indicators are used for various pH ranges due to the indicators
varying efficiency of color change in a given pH range. The use of different indicators means most
freshwater pH test kits will not provide proper results in marine water samples, and vice-versa.
Mineral hardness tests use indicators specific to the desired mineral being tested and EDTA to
form an EDTA-mineral complex. This test is volume-specific as well. The sample solution has the
required amount of indicator added. The EDTA titrator is slowly added until a distinct color change
is reached. At this point, with most aquaculture test kits, the volume of titrator used provides a
concentration of the mineral such as calcium or magnesium.
Titration of dissolved oxygen is the Winkler Test. The Winkler method uses a few more complex
steps when compared to the alkalinity, pH and mineral tests. Manganese (II) sulfate is mixed
with a hydroxide and iodide precipitate by the dissolved oxygen. The solution is acidified to
convert iodide to iodine. The iodine is titrated with thiosulfate. The amount titrated is read to
yield a concentration of dissolved oxygen because the dissolved oxygen is proportional to the
iodine concentration.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
264 WATER QUALITY
UVT Meter
UVT FIELD METER
With innovative Split-Sense technology
Key Features
• UV 254nm wavelength
• Memory calibration—no field zeroing needed
• Performs both UVT and UVA measurements
• Portable and easy to use
• Battery powered option
• 1 minute warm-up time
• Extreme accuracy
• 2-year warranty
The Real UVT field meter with exclusive Split-Sense technology is the world’s
most advanced and affordable portable UV254 testing meter, guaranteed.
The portable Real UVT meter can quickly and accurately test UV254 in the
field within minutes. The Real UVT meter utilizes Real Tech Inc.’s Split-Sense
technology to give it many advantages such as its fast 1 minute warm-up time
and extreme accuracy.
Split-Sense technology works by using a single beam of UV light to take
continuous readings before and after the insertion of the quartz cuvette
allowing for compensation of the effects of UV lamp drift and fluctuations.
The Real UVT meter’s new calibration memory feature allows testing to be
performed without the need to zero the meter with 100% DI water even if
the meter has been powered off.
Measuring Organics
UV254 provides an indication of the amount of natural organic matter (NOM)
in water and wastewater. More specifically, UV254 is the best detector of
aromatic organics or reactive NOM.
Aromatic organics are problematic, having several negative effects.
For example, when combined with chlorine, aromatic organics readily
form disinfection by-products (DBPs).
2-YEAR WARRANTY
The Real UVT field meter is the ideal solution for testing UV254 anywhere,
anytime. The Real UVT can also be used as a practical alternative or
supplement to measuring other more expensive and complicated organic
test parameters such as TOC, DOC, BOD and COD.
REAL UVT TECHNICAL SPECIFICATIONS
Beneficial Applications Include
UV WAVELENGTH
253.7 nm
SOURCE
Low pressure germicidal UV lamp
RANGE
5 - 100 % Transmittance, 0 – 1.3 Absorbance
• Coagulation optimization
• Filter performance
ACCURACY
0.5% UV Transmittance
• DBP formation potential
• UV disinfection
• Effluent monitoring
• Plant security/safety
RESOLUTION
0.1% Transmittance, 0.001 Absorbance
UNITS OF MEASUREMENT
UV Percent Transmittance (%), UV Absorbance per cm (cm-1)
BUILT-IN FAULT DETECTION SYSTEM
Notication of a system failure
DISPLAY
32 character back-lit LCD digital display provides easy on
screen instructions and system messages
CALIBRATION MEMORY
Calibration memory technology. Calibration with DI water
required only periodically.
RESPONSE TIME
Warm-up Time ~ 1 minute, Calibration ~ 2 seconds,
Computation ~ 2 seconds
OPERATING TEMPERATURES
0 – 45 °C (32 – 133 °F)
CASE
Rugged, Compact, Watertight, and Dustproof with
convenient carrying handle
SAMPLE CELL
10 mm x 10 mm quartz cuvette
PATH LENGTH
1 cm
POWER SUPPLY
• Wall Adapter – 110 VAC (UL approved) or 220 VAC,
Car Adapter – 12 VDC
• Battery power pack option
DIMENSIONS
8.7” L x 7.5” W x 3.9” H (254 cu in)
WEIGHT
4 lbs
• Process control
Calibration Memory
Split-Sense technology provides the unique advantage to remember the meters
calibration, so calibrating or zeroing the meter before each use is not required.
This elimates the need for carrying pure 100% DI water in the eld, furthering
the meters ease of use.
Fast Warm-Up Time
The Real UVT’s exclusive Split-Sense technology allows for a fast warm-up
time of only 1 minute.
Accuracy & Repeatability
Although the Real UVT meter has been designed to cope with the harsh
conditions encountered in the field, its extreme accuracy and repeatability
make it a valuable addition to any water analysis laboratory.
MODEL
EACH
P200UV254
REAL TECH P200 UV254 METER
1UVT060020
REPLACEMENT LAMP, P SERIES
1UVT045010
REPLACEMENT CUVETTE. QUARTZ, 10 MM
$1,695.00
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
99.00
115.00
WATER SECTION
QUALITY 265
Products / Products
Turbidity
/ Products
Meters
2020WE/WI PORTABLE TURBIDITY METERS
Industry-leading precision, sensitivity, and dependability in one of the most
innovative handheld meters available on the market — NOW WATERPROOF!
The multi-detector optical configuration assures long term stability and
minimizes stray light and color interferences. All readings are determined
by the process of signal averaging over a 5-second period. This minimizes
fluctuations in readings attributed to large particles and results in rapid,
highly repeatable measurements. Ideally suited for both low-level drinking
water applications, as well as monitoring high turbidity in the field.
Kits are supplied with 0, 1, and 10 NTU standards, sample bottle, six sample
tubes, USB cable, wall adapter and waterproof case.
• Seven user selected languages – English, Spanish, French, Japanese,
Chinese, Italian, and Portuguese
• Advanced calibration algorithms
• Easy menu driven operation and large LCD display
• 500 point data log; stored results can be viewed directly on instrument
or downloaded to a computer via USB cable and SmartLink 3 software
(available separately)
• Waterproof to IP67
• Lithium rechargeable batteries
LM1970
SHIP WT
(LBS)
MODEL
2-YEAR METER WARRANTY
EACH
LM1970
2020WE KIT (MEETS EPA 180.1)
6
$979.00
LM1970-ISO
2020WI KIT (MEETS ISO 7027)
6
979.00
ACCESSORIES/REPLACEMENT ITEMS
LM1910CD
SMARTLINK 3 PROGRAM CD
69.00
0290-6
TEST TUBES WITH CAPS (6)
27.85
0290-6
TURBIDITY SPECIFICATIONS
METER FEATURES
Unit of Measure 2020we
NTU, AU, ASBC, EBC
Signal Averaging
Disabled, 2, 5, 10
Units of Measure 2020wi
FNU, FAU, ASBC, EBC
Power
Range*
0-4000 NTU/FNU, 0-10,500 ASBC, 0-150 EBC
USB computer cable, wall adapter or Lithium ion rechargeable
battery, 3.7V, 2.5” x .75”, 1.7 oz
Resolution*
0.01 NTU/FNU 0.00-10.99 0.1 NTU/FNU 11.0-109.9 1
NTU/FNU 110-4000
AC Power
Optional
Data Logging
500 points
Accuracy*
From 0-2.5 NTU the accuracy is ±0.05 NTU
From 2.5-100 NTU the accuracy is ±2%
Above 100 NTU the accuracy is ±3%
Auto Shut-Off
Disabled, 5, 10, 30 seconds
Optional Software
SmartLink 3
Detection Limit
0.05 NTU/FNU
Languages
English, French, Spanish, Japanese, Italian, Portuguese,Chinese
Range Selection
Automatic
Response Time
<2 Seconds
Reproducibility*
.02 NTU/FNU or 1%
Size
7.5 x 3.5 x 2.5 inches; 19.05 x 8.84 x 6.35 cm
Light Source
Tungsten (EPA), complies with EPA 180.1, Rev. 2.0 (1993)
and Standard Methods 2130 B-2001; 860nm LED (ISO),
complies with ISO 7027
Weight
13 ounces
Display
6-line LCD with backlit display
SMART Colorimeter® and LaMotte® are registered trademarks of LaMotte Chemical Products Co.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
SECTIONQUALITY
266 WATER
266
Products
Calibration/ Products
Solutions/ Products
CALIBRATION SOLUTIONS
The easiest way to calibrate a pen or meter in the field
Milwaukee standard calibration solutions are available in 230-mL
bottles and 20-mL sachets.
Traditional buffer solutions are packed in 230-mL leak-proof bottles
and are recommended for lab application.
Sachets are sealed against light and air and are ideal for on-the-spot
calibration. Simply open, insert the tester or electrode into the sachet
and calibrate. Sachets are sold in boxes of 25 pieces.
pH
MODEL
EACH
MW4
PH 4.01
25 X 20 ML SACHETS
$24.55
MW7
PH 7.01
25 X 20 ML SACHETS
24.55
MW10
PH 10.01
25 X 20 ML SACHETS
24.55
MW5
(10) PH 7.01, (5) PH 4.01, 10.01 AND H₂O
25 X 20 ML SACHETS
24.55
MA9060
12.880 ΜS/CM EC SOL.
230 ML BOTTLE
$8.80
M10030B
12.880 ΜS/CM ECSOL.
25 X 20 ML SACHETS
15.25
MA9061
1.413 ΜS/CM EC SOL .
230 ML BOTTLE
8.80
MA9069
5000 ΜS/CM EC SOL.
230 ML BOTTLE
8.80
MA9020
200–275 MV ORP SOL.
230 ML BOTTLE
$15.00
MA9025
ORP PROBE CONDITIONING KIT
2 X 2 OZ BOTTLES
10.50
MA9062
1,382 PPM TDS SOL.
230 ML BOTTLE
$8.80
M10032B
1,382 PPM TDS SOL.
25 X 20 ML SACHETS
15.25
M10038B
6.44 PPT TDS SOL.
25 X 20 ML SACHETS
15.25
M10442B
1,500 PPM TDS SOL.
25 X 20 ML SACHETS
15.25
M10080B
800 PPM TDS SOL.
25 X 20 ML SACHETS
15.25
MA9070
ZERO O₂ SOL.
230 ML BOTTLE
$15.00
MA9071
O₂ ELECTROLYTE SOL.
230 ML BOTTLE
20.50
Conductivity
ORP
TDS
D.O.
Care and Storage
MA9015
PH/ORP STORAGE SOL.
230 ML BOTTLE
$8.80
MA9016
PH/ORP CLEANING SOL.
230 ML BOTTLE
8.80
MW0
DEIONIZED WATER
25 X 20 ML SACHETS
Can’t find what you’re looking for? See it all at PentairAES.com.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
24.55
WATER QUALITY 267
Calibration Solutions/Test Kits
PH CALIBRATION SOLUTIONS
500-mL bottles
MODEL
CAL4
CAL7
EACH
4+
CAL4
PH 4.01
$13.35
$12.02
CAL7
PH 7.00
13.35
12.02
CAL10
PH 10.00
13.35
12.02
CAL10
ELECTRODE CARE ACCESSORIES
Electrode cleaning solution will safely clean pH/
ORP electrodes. Use pH storage solution with the
electrode saver bottle. Fill saver bottle with storage
solution. Accepts probes up to 12 mm in diameter
and protects the electrode. Use rinse solution
between each reading for greater accuracy.
MODEL
CS
EACH
4+
PH/ORP CLEANING SOLUTION, 1 PINT
$12.35
$11.12
16.50
14.85
6.12
5.51
16.50
—
SS
PH/ORP STORAGE SOLUTION, 1 PINT
SBT
SAVER BOTTLE
VSDI
RINSE SOLUTION, 1 QUART
CS
CONDUCTIVITY CALIBRATION SOLUTIONS
NIST-traceable conductivity solutions to calibrate both field instruments
and lab instruments and cells together for maximum accuracy. 1 pint bottles.
MODEL
POND CARE® MASTER TEST KIT
EACH
Y3167-E
1,000 US/CM PER PINT (FRESH WATER)
Y3168-E
10,000 US/CM PER PINT (BRACKISH WATER)
$20.00
20.00
Y3169-E
50,000 US/CM PER PINT (SALT WATER)
20.00
FW
This is a complete kit for testing pond water.
Tests include pH, ammonia, nitrite and phosphate.
Kit contains instruction book, improved color cards
for easy reading, 4 test tubes, holding tray and
enough reagents for 50 tests each.
MODEL
EACH
164M
$19.52
Pond Care® is a registered trademark of Mars Fishcare North America, Inc.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
268 WATER QUALITY
Test Kits
TEST
FISH FARM 9 TEST KIT
RANGE
AMMONIA NITROGEN
0.05-2.0 ppm
NITRITE
0.05–0.8 mg/L
PH
0–200 mg/L
ALKALINITY
0 to 240 ppm
CARBON DIOXIDE
0–50 mg/L
CHLORIDE
0–200 mg/L
DISSOLVED OXYGEN
0–10 mg/L
HARDNESS
0–200 mg/L
TEMPERATURE
FW
TECH FAV
HAZMAT AG
Here are the most common water quality
parameters tested by freshwater fish farmers—
in one rugged carrying case. The kit features
deluxe octa-slide comparators by LaMotte®.
An armored thermometer (-5 to 45°C) is included.
Kit weighs 10 lbs, refill kit weighs 0.5 lb.
LMAQ2
FISH FARM 9 TEST KIT
LMAQ2RP
REAGENT REFILL KIT
$240.00
146.30
-5–45°C
LMAQ2
SALTWATER FISH FARM 9 TEST KIT
SW
TEST
HAZMAT A
This kit measures eight different parameters.
Salinity can read to 40 ppt by diluting half the
sample and doubling the final readings. Includes
armored thermometer. Kit and reagent refill
contains enough reagents for 50 tests each.
Kit weighs 10 lbs, refill 1 lb.
LMAQ4
SALTWATER TEST KIT
LMAQ4RP
REAGENT REFILL
RANGE
AMMONIA NITROGEN
0.05-2.0 ppm
NITRITE NITROGEN
0.25–10 ppm
PH
$299.00
158.70
5.0–10.0
NITRATE NITROGEN
0.05–10 ppm
ALKALINITY
0–200 ppm
CARBON DIOXIDE
0–50 ppm
DISSOLVED OXYGEN
0–10 ppm
SALINITY
0–20 ppt
LMAQ4
TEST
AMMONIA NITROGEN
NITRITE
FISH FARM 6 TEST KIT
RANGE
This is a good kit if you are using meters to measure
pH, dissolved oxygen and temperature. The kit is
the same as the LMAQ2 but without pH, dissolved
oxygen and thermometer. Kit weighs 10 lbs, refill kit
weighs 0.5 lb.
0.2–3 mg/L
0.05–0.8 mg/L
ALKALINITY
0–200 mg/L
CARBON DIOXIDE
0–50 mg/L
CHLORIDE
0–200 mg/L
HARDNESS
0–200 mg/L
FW HAZMAT A
LMAQ3
FISH FARM 6 TEST KIT
LMAQ3RP
REAGENT REFILL KIT
$197.00
117.50
LMAQ3
REAGENT REFILLS
For LMAQ2, LMAQ3 and LMAQ4.
LM1R ALKALINITY
$18.38
LM4R
CHLORIDE HAZMAT A
LM2R AMMONIA FOR LMAQ2 & LMAQ3 HAZMAT A 31.67
LM5R
DISSOLVED OXYGEN
LM3304RP AMMONIA FOR LMAQ4 HAZMAT A 34.95
LM6R
HARDNESS
LM3R CARBON DIOXIDE
LM7R
NITRITE
38.87
15.84
$32.63
LM3353RP PH
$6.70
45.23
LM9R
SALINITY HAZMAT A
39.03
25.86
LM10R
NITRATE
44.10
LaMotte® is a registered trademark of LaMotte Chemical Products Co. Hach® is a registered trademark of Hach Co.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 269
Test Kits
HACH AQUACULTURE TEST KIT FF1A
FW
TEST
HAZMAT A
This popular freshwater aquaculture test kit
includes all the necessary apparatuses and
reagents for 100 tests each of nine critical
parameters. The kit uses the drop- count method
for titration tests and Hach® color comparators
for colorimetric tests. Colorimetric tests provide
results directly in mg/L and drop-count tests
require, at most, a simple multiplication or division
step to determine concentration. Ship weight 10 lbs.
FF1A
$309.00
ALKALINITY
6.4–136 mg/L
AMMONIA*
0–3 mg/L
CARBON DIOXIDE
5–100 mg/L
CHLORIDE
5–400 ppt
DISSOLVED OXYGEN*
0.2–20 mg/L
HARDNESS
17–510 mg/L
NITRITE
0–0.5 mg/L
PH
TEMPERATURE
TEST
100–4,000 mg/L
ALKALINITY
100–4,000 mg/L
AMMONIA*
0–3 mg/L
CARBON DIOXIDE
10–100 mg/L
CHLORIDE
10–160 mg/L
DISSOLVED OXYGEN*
HARDNESS
NITRITE
PH
TEMPERATURE
-30–120°F
FW
HAZMAT A
Similar to the FF1A, the FF2A has an additional
test kit to measure for acidity. Designed for
freshwater applications only, the kit uses
convenient, concentrated titrant solutions in
disposable cartridges and has an easy-to-read
digital titrator that guarantees repeatability from
test to test. Ship weight 12 lbs.
0–10 mg/L
FF2A
100–4,000 mg/L
$526.00
0–0.5 mg/L
4–10
-30–120°F
HACH SALTWATER TEST KIT FF3A
SW
HAZMAT A
Hach® model FF3A test kit is designed specifically
for saltwater applications. The kit uses a digital
titrator and includes detailed instructions.
Enough reagents and apparatuses for 100 tests
each. Ship weight 10 lbs.
FF3A
4–10
HACH AQUACULTURE TEST KIT FF2A
RANGE
ACIDITY
RANGE
$622.00
TEST
RANGE
ACIDITY
100–4,000 mg/L
ALKALINITY
100–4,000 mg/L
AMMONIA*
0–3 mg/L
CARBON DIOXIDE
10–100 mg/L
CHLORIDE
2–100 mg/L
DISSOLVED OXYGEN*
HARDNESS
NITRITE
PH
TEMPERATURE
0–10 mg/L
100–4,000 mg/L
0–0.5 mg/L
4–10
-30–120°F
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
270 WATER QUALITY
Aquaculture Laboratories
AQUACULTURE ANALYSIS LABORATORY
HAZMAT A
Highly recommended for the serious field professional, this kit includes most
things a fish farmer needs to monitor water quality. The portable lab analyzes
the 8 critical factors most commonly required by a fish farmer: dissolved
oxygen, pH, temperature, salinity, nitrite, ammonia, hardness and alkalinity.
Excellent for both fresh and saltwater analyses. Designed with field analysis
as a priority, the outfit is packaged in a durable, waterproof Pelican™ case
that is foam-lined and holds the components in place. See part numbers for
individual reagents.
MODEL
EACH
AAL1*
$1,507.61
*Not for shipment into Canada.
TEST
DISSOLVED OXYGEN
TEMPERATURE
PH
Each kit includes:
• YSI 550A D.O. meter (Y550A12)
• Hach alkalinity test strips (H27448)
• Salinity refractometer (SR5-AQ)
• Hach hardness test strips (H27452)
• Pocket dial thermometer (TH4)
• LaMotte nitrite test kit (LM3352)
• LaMotte ammonia test kit (LM4795)
• pH/Temp Tester (WD-35634-20)
CEL COMPLETE AQUACULTURE LABORATORY
FW
RANGE
0 to 20 mg/L; 0 to 200% Sat
0 to 230°F, -18 to 110°C
0 to 14.00
ALKALINITY
0 to 240 ppm
HARDNESS
0 to 425 ppm
AMMONIA
1 to 8 mg/L
NITRITE
0.1 to 0.8 mg/L
SW HAZMAT A
This kit provides instruments and chemicals for 15 tests critical to effective
aquatic livestock management whether used in your mobile lab or at the field
site. Premeasured reagents are impervious to environmental contamination,
apparatus and labware. Instruments have battery power option so tests can
be run immediately without concern for sample preservation and handling.
With this kit, there is no waiting for hours or days for a lab result. Kit includes
DR 900 Colorimeter, HQd pH meter and probe, Digital Titrator, TDS Pocket
Tester, reagent sets, apparatus, illustrated instrument manual and procedure
manual CD in a sturdy field case. Ship weight 10 lbs.
MODEL
EACH
H251233
TEST
$2,468.00
RANGE
ACIDITY
10 - 160 mg/L
100 - 4,000 mg/L
ALKALINITY
10 - 4,000 mg/L
AMMONIA
0 - 0.50 mg/L
CARBON DIOXIDE
10 - 1,000 mg/L
CHLORIDE
10 - 10,000 mg/L
DISSOLVED OXYGEN
HARDNESS
IRON
0 - 15.0 mg/L
10 - 4,000 mg/L
0 - 3.00 mg/L
NITRATE
0 - 30.0 mg/L
NITRITE
0 - 0.350 mg/L
PHOSPHORUS
0 - 2.50 mg/L
TEMPERATURE
0 to 80 ° C
TECH TALK 132
Ammonia Testing
Ammonia is the primary waste byproduct of protein consumption, and is excreted across fish gills as a gas. It may exist in two forms: un-ionized
(NH3) and ionized (NH4+). Ionized ammonia is relatively harmless, but gill burn may occur when un-ionized ammonia is present in the water. The
amount of un-ionized ammonia relies heavily on pH and temperature. Un-ionized ammonia can be removed via a water change, detoxified with the use
of a water conditioner and/or consumed by an established biological filter. Since un-ionized ammonia is toxic to fish, ammonia detection is an
important of successful aquaculture. Three types of test are can be used in aquaculture to detect ammonia: Nessler-based, salicylate and
hydrophobic membranes.
Nessler-based test kits test total ammonia only. They are best used when no other substances are added to the water. Water conditioners, amines
and various types of medications can interfere with Nessler-based test readings, resulting in falsely high ammonia readings.
Salicylate-based test kits test for total ammonia. This is the most commonly used ammonia test in aquaculture, and will provide results in the
presence of water conditioners and various medications.
Hydrophobic membrane testing uses a chemically treated membrane to detect various gases. The membrane can be treated with reagents specific to
un-ionized ammonia. Hydrophobic membranes can detect free ammonia even in the presence of water conditioners, amines and salts because free
ammonia exists as a gas. This is not the most commonly used test, but it is very efficient in free ammonia detection.
The test kit instructions should indicate which testing method the kit purchased is using to detect ammonia levels. More and more aquarists choose
salicylate-based ammonia test kits due to accessibility, reliability and the ability to dose water conditioners without interference..
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
WATER QUALITY 271
Test Strips
TEST STRIPS
Individual pads on a polystyrene strip. These are
packaged in the pop top vial which is molded with a
desiccant liner for protection from moisture. The
vial has a molded desiccant liner that protects the
strips from moisture intrusion and eliminates loose
desiccant bags.
LM2999LR
MODEL
LM3031
LM3000LR
LM2951HR
TEST FACTOR
RANGE (PPM)
STRIPS/VIAL
CHLORINE DIOXIDE
0-10 (0, 0.25, 0.5, 1, 3, 5, 10)
50
CHLORINE DIOXIDE
0-500 ( 0, 10, 25, 50, 100, 250, 500)
50
9.95
CHLORINE, TOTAL, LOW RANGE
0-10 (0, 0.25, 0.5, 1, 3, 10)
25
5.90
LM2999LR
LM3002
LM2963LR-G
LM3002
LM4250BJ
EACH
$9.95
CHLORINE, TOTAL
10-200 (10, 50, 100, 200)
200
5.95
LM3031
CHLORINE, FREE, HIGH RANGE
0-800 (0, 50, 100, 250, 500, 800)
50
17.10
LM3000LR
PERACETIC ACID, LOW RANGE
0-50 (0, 5, 10, 20, 30, 50)
50
9.40
LM2984LR
HYDROGEN PEROXIDE
0-50 (0, 1, 3, 10, 30, 50)
25
9.95
LM2948BJ
IODINE
12-100 (12, 25, 50, 100)
200
5.95
QAC DUAL RANGE
LOW: 0, 10, 20, 40, 80
HIGH: 0, 100, 200, 400, 800
50
7.55
QAC
50-400 (50, 100, 200, 400)
100
5.75
QAC, HIGH RANGE
200-1500 (200, 400, 600, 1,000, 1,500)
50
7.55
LM2934
LM2951
LM2951HR
LaMotte is a registered trademark of LaMotte Chemical Products Co.
®
TEST STRIPS
FW
SW
These small test strips provide a rapid means of
checking water quality. Simply dip a strip into the
sample, wait for color to develop and compare color
on the reagent pad to the color chart on the bottle.
H27448
MODEL
TEST FACTOR
H27448
ALKALINITY
RANGE (PPM)
STRIPS/VIAL
0–240
50
$10.69
H27553
EACH
AMMONIA
0–6
25
22.95
H27450
FREE AND TOTAL CHLORINE*
0–10
50
17.09
H27451
COPPER
0–3
25
23.39
H27452
TOTAL HARDNESS*
0–425
50
12.15
H27453
TOTAL DISSOLVED IRON
0–5
25
23.39
H27454
NITRATE/NITRITE
0–50 / 0–3
25
18.35
H27456
PH*
PH 4–9
50
12.05
H27571
PHOSPHATE*
0–50
50
20.59
*Can be used with salt water.
TEST STRIPS
FW
SW
Each vial of test strips features a leakproof, hinged, pop-top lid and a
wrap-around desiccant liner to protect strips from moisture intrusion.
The multi-strips have 5 different tests (alkalinity, pH, nitrite, nitrate
and hardness) on one strip. Test strips are both fresh and salt water
compatible.
TEST FACTOR
RANGE
(PPM)
STRIPS/VIAL
R443
AMMONIA
0–6
25
$12.55
R442
MULTI-STRIP
25
10.75
MODEL
We offer many test kits designed for different markets.
All are accurate. The most important consideration
is their use for fresh FW or salt SW water.
Look for these symbols.
R442
EACH
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
272 WATER QUALITY
Test Kits
LAMOTTE® TEST KITS
LaMotte® brand water test kits have been in use for over 50 years. They are
accurate, inexpensive and suitable for both fresh and saltwater testing (except
when noted). Each kit (and replacement reagent) contains enough reagent to
run between 50 and 200 tests, depending upon the amount of reagent used to
reach the end point. All single kits are approximately 2 lbs. Made in USA.
ALKALINITY KIT
PH KIT (See Pg. 273)
ALKALINITY
CHLORIDE
Alkalinity refers to the quantity and type of compounds present in the water
that shift the pH above 7.0. Water with high alkalinity tends to be more strongly
buffered. Buffering will reduce the tendency of the pH to shift. Add sodium
bicarbonate to increase alkalinity (buffering capacity) and calcium chloride
for hardness. Testing takes 2 minutes. Range: 0 to 200 ppm.
Chloride is one of the major anions found in water. When using salt, be careful
where discharge occurs. Salt water is about 16,000 ppm chloride; it takes only
about 500 ppm chloride to kill some plants, shrubs and trees. For freshwater
use only. Takes two minutes. 0 to 200 ppm.
LM4491
$35.60
LM4491RP
$16.00
AMMONIA-NITROGEN
To know how toxic ammonia is to your fish, you must know the ammonia level,
the pH level and the temperature. A total ammonia level of 10 ppm may not be
harmful to trout at a pH of 6.0, but it would be deadly if the pH were 7.0. The test
kits measure total ammonia. Total ammonia consists of both nontoxic NH₄+
(ionized) and toxic NH₃ (un-ionized) forms. The proportion of one to the other is
variable. The toxic form increases in proportion as the pH and/or temperature
increases. Ammonia builds up in the water primarily by the metabolism of
protein (nitrogen). About 10% of the protein fed to fish will show up as ammonia
in the water. Testing takes 5 minutes. LM4795 range: 1 to 8 ppm. LM3351-01
range: 0.2 to 3 ppm. Note: Water containing Ammo Lock® and other ammoniaremoving chemicals should be tested using an ammonia kit (LM3304) that uses
the salicylate method (0 to 2.0 ppm).
LM3351-01*
$73.80 HAZMAT A
LM3351-01RP* $25.70 HAZMAT A
LM3304
78.95 HAZMAT A
LM3304RP
34.95 HAZMAT A
LM4795*
72.65 HAZMAT A
LM4795RP*
23.55 HAZMAT A
*Not for shipment into Canada.
CALCIUM HARDNESS
$46.80
LM3609RP
$19.95
CARBON DIOXIDE
Carbon dioxide (CO2) is present in water as a dissolved gas, like oxygen.
High CO2 can stress and even kill fish. It also forms carbonic acid,
which lowers the pH. Testing takes 2 minutes. 0 to 50 ppm.
LM7297
FW
$46.30 HAZMAT A
LM4503RP
$28.50 HAZMAT A
CHLORINE
Chlorine and chloramines (chlorine/ammonia complex) are toxic to fish,
and the presence of one or the other can be expected in your municipal water
supply. For aquaculture applications, chlorine should be removed chemically,
by aeration or by aging. Chloramines must be removed chemically. For testing
fresh water only. Testing takes 2 minutes. Range: 0.2 to 3.0 ppm.
LM3308
FW
$66.55
LM3308RP
$20.28
COPPER
Copper as copper sulfate is often used in fish culture as an algaecide, but it can
be lethal to fish at low levels, especially with low pH and alkalinity levels. It can
be very toxic to juvenile clams and other invertebrates, particularly saltwater
species. Testing takes one minute. Range: 0.05 to 0.5 ppm.
LM6616
$89.95
LM6616RP
$6.60
DISSOLVED OXYGEN
This kit provides an inexpensive alternative to a dissolved oxygen meter.
Testing takes 5 minutes. 0 to 10 ppm.
Because calcium and magnesium are both major components of the total
hardness of water, measuring hardness by itself may not reveal enough.
Recirculating aquaculture systems need calcium levels greater than 50 ppm
to maintain a fully functional biofilter. Testing takes 2 minutes. 0 to 200 ppm.
LM3609
LM4503
$39.35
LM7297RP
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
LM5860
LM5860RP
$31.55
HARDNESS
The total hardness of water generally represents the total concentration of
dissolved calcium and magnesium ions. Although closely related to alkalinity
and the buffering capacity of water, high alkalinity may not always indicate
high hardness. Hard waters (above 150 ppm) are generally more productive
for fish than soft waters. The typical range for aquaculture is 50 to 200 ppm.
Testing takes 2 minutes. 0 to 200 ppm.
LM4482
$13.40
$51.95
$44.55
LM4482RP
$18.70
273 SECTION
WATER SECTION
QUALITY 273
Products / Products / Products
Products / Products / Products
Test Kits
NITRATE, LOW LEVEL KIT
PHOSPHATE KIT
IRON
PHOSPHATE
Well water often contains high concentrations of ferrous iron (iron in solution).
Concentrations as low as 0.2 ppm can be harmful to certain species of fish.
To remove iron, aerate the water and then settle or filter out the resulting
orange iron oxide particles. Testing takes two minutes. Range: 0.05 to 1 ppm.
Phosphates enter water supplies from wastewater treatment, sewage,
soil runoff, fish foods, etc. Although necessary for biological processes,
too much phosphate may cause excessive growth of algae and plants.
Testing takes 5 minutes. For fresh and salt water. Range: 0 to 2.0 ppm.
LM7787
LM3121-02
$98.30
LM7787RP
$19.95
$89.00
LM3121-02RP
$23.95
NITRATE, LOW LEVEL
SALINITY TITRATION
This is the final nitrogen product formed by bacterial oxidation of ammonia.
Although it is not usually considered a threat to freshwater fish, it is a plant
nutrient and can harm marine invertebrates. Testing takes 12 minutes.
Range: 0.25 to 10 ppm.
For measuring both low and high salinity levels in ponds, recirculating systems,
brackish waters, etc. Testing takes 5 minutes. 0 to 20 ppt (parts per thousand)
in 0.4 increments.
LM3319
$74.55 HAZMAT A
LM3354
56.50
LM3319RP HAZMAT A
LM3354RP
$30.25
20.55
NITRITE
This is an intermediate compound formed in the oxidation (nitrification)
process of ammonia becoming nitrate. Nitrite can become toxic in recirculating
systems. Nitrites interfere with the ability of the fish's blood to take up oxygen
(levels as low as 0.2 ppm can cause "Brown Blood" problems with catfish).
Testing takes 5 minutes. Range: 0.05 to 0.8 ppm.
LM3352
$83.10
LM3352RP
PH
$48.85
FW
LM2159-01
SW
63.45
$62.30
LM7459RP
$37.70
SULFIDE
For measuring hydrogen sulfide (toxic to fish), the most common form of
sulfide. Testing takes 2 minutes. Range: 0.2 to 20 ppm.
LM3322
$58.50
LM3322RP
$23.55
$25.85
This is a measure of hydrogen ion concentration, or more simply, whether the
solution is acidic or basic. Units 0 to 6.9 are referred to as acid or acidic.
Units of 7.1 to 14 are considered basic and pH 7.0 is neutral. Takes 2 minutes.
Range: 5.0 to 10.0; LM2159-01 range: 7.7 to 8.4 (Cresol Red).
LM3353
LM7459
LM3353RP
$6.70
LM2159-01RP
14.75
TECHNICIAN PROFILE
Jen Holdsworth
Jen Holdsworth graduated from the State University of New
York, College of Environmental Science and Forestry
(SUNY-ESF), with a Bachelor’s degree in Biology. Jen has
extensive experience in aquaponics operations, along with
experience with marine ornamental fish and coral
aquaculture. Jen manages the new PAES WATER
demonstration and research RAS facility, in addition to
Pentair Aquatic Eco-Systems’ demonstration aquaponics
facilities. Jen also assists in the organization and
presentation of PAES workshops and teaching activities.
LaMotte® is a registered trademark of LaMotte Chemical Products, Co.
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
?? 511
???
Online Orders: PentairAES.com I Phone Orders and Tech Advice: 877.347.4788
IMMERSE YOURSELF AT PENTAIRAES.COM
PENTAIR AT A GLANCE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement