Bosch LTC 0630 Dinion2X Datasheet

Add to my manuals
5 Pages


Bosch LTC 0630 Dinion2X Datasheet | Manualzz

Video | LTC 0630 Series Dinion2X Day/Night Camera

LTC 0630 Series Dinion2X Day/Night



Advanced Image Processing Technology u

Improved XF-Dynamic engine with SmartBLC u

Detail enhancement u

True Day/Night performance with switchable filter u

1/2-inch CCD sensor

The LTC 0630 Dinion2X Day/Night camera is a highperformance, surveillance camera. It uses a 1/2-inch

CCD sensor and incorporates advanced digital signal processing for outstanding picture performance.

The advanced image processing enhances sensitivity; the improved XF-Dynamic engine extends the dynamic range. This unique combination provides a sharper, more detailed image with outstanding accuracy in color reproduction even under harsh lighting conditions.

The Dinion2X camera is easy to install and ready to use, and offers the best solution for demanding scene conditions. The day/night feature ensures the highest image quality possible at any time. Depending on the available light the camera will automatically switch from color to monochrome.

All Dinion cameras are supplied ready to operate.

Simply attach the lens, connect video and then power.

Six distinct pre-programmed operational modes are stored in the camera. Recall the mode that suits your application for optimized performance.

The camera automatically detects the lens type. The lens wizard ensures accurate back-focusing for perfectly sharp pictures at all times. For especially challenging situations where fine tuning or special settings are required, the camera parameters can be individually set using the control buttons on the side of the camera and an On-screen Display (OSD).


XF-Dynamic and Image Processing

Improved XF-Dynamic technology and highly accurate digital signal processing optimally captures the detail in both bright highlights and deep shadows simultaneously. The Dinion2X maximizes the information visible in the picture even with strong backlighting.


Turn on SmartBLC to automatically compensate the image without the need for complicated set-up.

Detail Enhancement

Features such as Autoblack and Sharpness further improve the details in a scene, pixel by pixel.

Day/Night Mode

The day/night mode provides enhanced night viewing by increasing the IR sensitivity. The IR filter can switch from color to monochrome automatically by either sensing the illumination level or via the alarm input.

The filter can be switched manually via the alarm

2 | LTC 0630 Series Dinion2X Day/Night Camera input, through the camera menu or via the Bilinx coaxial control interface. An internal through-the-lens

IR detector enhances the monochrome mode stability, as it prevents reverting to the color mode when IR illumination is dominant. IR contrast is also measured and used to handle reflected IR light in outdoor scenes.

Privacy masking

Four different privacy zones allow specific parts of a scene to be blocked. Pre-program any part of the scene to be masked.

Default Shutter

The default shutter speed captures fast moving objects when sufficient light is available. When light levels fall and other adjustments have been exhausted, the shutter speed reverts to a standard setting to maintain sensitivity.

Bilinx Technology

Bilinx is a bidirectional communication capability embedded in the video signal of all Bosch Dinion cameras. Technicians can check status, change camera settings and even update firmware from virtually anywhere along the video cable. Bilinx reduces service and installation time, provides for more accurate setup and adjustment, and improves overall performance.

In addition, Bilinx uses the standard video cable to transmit alarm and status messages, providing superior performance without additional installation steps.

Lens Wizard

The Lens Wizard automatically detects the lens type and helps focus the lens at the maximum opening to ensure proper focus is maintained throughout the 24hour cycle. No special tools or filters are required.

Ease of installation

Several features are available that make installation easy:

• Power and alarm connections have cable connectors which can be removed even when the camera is mounted.

• A built-in test pattern generator produces signals to test and fault-find cables.

• A multi-language On-Screen Display (OSD) increases user compatibility.

Programmable Modes

Six independent, pre-programmed operating modes support typical applications, but are fully programmable for individual situations. Switching between modes is easy via Bilinx or the external alarm input.

High efficiency

A high efficiency power supply improves maximum operating temperature.

Video Motion Detection

The built-in video motion detector allows you to select a programmable area with individual thresholds. The global scene change detector minimizes false alarms caused by sudden lighting condition changes, such as switching on or off the indoor or security lighting.

When motion is detected, alarms can be displayed in the video signal, the output relay can be closed or an alarm message can be transmitted via Bilinx.

SensUp Dynamic

By increasing the integration time up to 10 times on the CCD, the effective sensitivity is dramatically enhanced. This is especially useful when relying only on moonlight for illumination.

Typical applications:

• Outdoor perimeters

– low light

– IR light

• Traffic monitoring

– highway

– traffic intersections

– emergency response coordination

• Tunnels

• Car parks (outdoor)

• Restricted access locations such as:

– prisons

– ports / freight terminals

– military facilities

– border control and homeland security

• Casino and gambling centers.

Certifications and approvals

Electro Magnetic Compatibility

Emission EN55022 class B, FCC part 15 class B,

EN6100-3, EN50121-4



EN50130-4 (CE), EN50121-4 (CE)

Camera with 500 g (1.1 lbs) lens according to



LTC0630/11: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),

UL60950, CAN/CSA No. 60950

LTC0630/51: UL1950-1, CSA 22.2 No. 950-1, EN60950-1 (CE),

EN61000-3-2 2000 +A2:2005,

EN61000-3-3 1995 +A1:2001 +A2:2005

LTC0630/21 and LTC0630/61: UL1950-1, CSA 22.2 No. 950-1,

EN60950-1 (CE), UL60950, CAN/CSA No. 60950










Declaration of Conformity

Declaration of Conformity

3 | LTC 0630 Series Dinion2X Day/Night Camera

Installation/configuration notes


118 (4.646)

85 (3.346)

34 (1.339)

1/4"-20 UNC

Dinion2X D/N Camera

48 (1.889)

1/4"-20 UNC

122 (4.803)

67 (2.638) mm (in)

Parts included




Quantit y


LTC 0630 Series Dinion2X Day\Night Camera

C/CS – mount conversion ring

Spare male 4 – pin lens connector

Lens not included

Technical specifications


Model No.

LTC 0630/11

Rated Voltage

24 VAC ±10%

Rated Frequency

50 Hz

LTC 0630/21

LTC 0630/51

LTC 0630/61

Power Consumption

CCD Type

Active Pixels

PAL Model:

NTSC Model

12 VDC ±10%

24 VAC ±10%

12 VDC ±10%

230 VAC ±10%

120 VAC ±10%

350 mA (12 VDC)

250 mA (24 VAC)

70 mA (120-240 VAC)

1/2-inch interline

752 x 582

768 x 494

60 Hz

50 Hz

60 Hz

Sensitivity (3200 K, scene reflectivity 89%, F1.2)

Full video

(100 IRE)

Usable picture

(50 IRE)



+ SensUp 10x


1.40 lx

(0.13 fc)

0.14 lx

(0.013 fc)

0.31 lx

(0.029 fc)

0.031 lx

(0.0029 fc)


+ SensUp 10x

0.57 lx

(0.053 fc)

0.057 lx

(0.0053 f c)

0.121 lx

(0.0112 fc)

0.0121 lx

(0.00112 fc


Horizontal Resolution

Signal-to-Noise Ratio

Video Output



Sensitivity up


Auto Black

Dynamic engine

Dynamic range

Dynamic Noise



Usable picture

(30 IRE)

0.0991 lx

(0.0097 fc)

0.00991 lx

(0.0009 fc)

0.0391 lx

(0.0036 fc)

0.00391 lx

(0.00036 fc)

540 TVL

>50 dB

Composite video 1 Vpp, 75 ohm

Internal, Line Lock, HV-lock and Genlock

(Burst lock) selectable

Auto (1/50 [1/60] to 1/10000) selectable

Auto (1/50 [1/60] to 1/50000) automatic flickerless, fixed selectable

Adjustable from Off up to 10x

Color, Mono, Auto

Automatic continuous, Off

XF-Dynamic, SmartBLC

96 dB (16-bit image processing)

Auto, On/off selectable

Sharpness enhancement level selectable

4 | LTC 0630 Series Dinion2X Day/Night Camera



Peak White Invert

White Balance

Alarm Output

Alarm Input (TTL)

Alarm Output Relay

External Synchronization


Cable Compensation


AGC On or Off (0 – 30 dB) selectable


ATW, ATWhold and manual (2500 to


VMD or Bilinx

Profile switching, +3.3 V nominal,

+40 VDC max.

30 VAC or +40 VDC, Max 0.5 A continuous, 10 VA

75 ohm or high impedance selectable

Camera ID

Test Pattern Generator

Lens Types

Lens Mount


Remote Control

Video Motion Detection

Privacy Masking

Up to 1000 m (3000 ft) coax without external amplifiers (automatic set-up in combination with Bilinx coaxial communication)

17 character editable string, position selectable

Color bars 100%, Greyscale 11-step,

Sawtooth 2H, Checker board, Cross hatch, UV plane

Manual, DC- and Video-Iris auto-detect with override

DC-iris drive: max. 50 mA continuous

Video-iris: 11.5 VDC ±0.5, max. 50 mA continuous

CS (max lens protrusion 5 mm, 0.2 inch),

C-mount compatible with supplied adapter ring

6 preset programmable modes

Bilinx coaxial bi-directional communication

One area, fully programmable

Four independent areas, fully programmable

OSD with soft-key operation (multi-lingual) Controls


Dimensions (H x W x L)



Tripod Mount

58 x 66 x122 mm (2.28 x 2.6 x 4.8 inch) without lens

450 g (0.99 lbs) without lens

RAL 9007 Metallic Titanium

Bottom (isolated) and top 1/4-inch

20 UNC


Operating Temperature

Storage Temperature

-20°C to +55°C (-4°F to 131°F)

-40°C to +70°C (-40°F to +158°F)

Operating Humidity

Storage Humidity

20% to 93% RH up to 98% RH

Ordering information

LTC 0630/11 Dinion 2X Day/Night Camera

1/2—inch, 540 TVL, PAL, 2X DSP, 24 VAC/12 VDC,

50 Hz

Order number LTC 0630/11

LTC 0630/21 Dinion 2X Day/Night Camera

1/2—inch, 540 TVL, NTSC, 2X DSP, 24 VAC/12 VDC,

60 Hz

Order number LTC 0630/21

LTC 0630/51 Dinion 2X Day/Night Camera

1/2—inch, 540 TVL, PAL, 2X DSP, 230 VAC, 50 Hz

Order number LTC 0630/51

LTC 0630/61 Dinion 2X Day/Night Camera

1/2—inch, 540 TVL, NTSC, 2X DSP, 120 VAC, 60 Hz

Order number LTC 0630/61

EX12LED8M LED Infrared Illuminator

Infrared w/ 42 LEDs, 850 nm, Med Beam 30°, 12/24

VRB, 0.5 amp, Photocell

Order number EX12LED8M

EX12LED9M LED Infrared Illuminator

Infrared w/ 42 LEDs, 940 nm, Med Beam 30°, 12/24

VRB, 0.5 amp, Photocell

Order number EX12LED9M

EX12LED8W LED Infrared Illuminator

Infrared w/ 42 LEDs, 850 nm, Wide Beam 60°, 12/24

VRB, 0.5 amp, Photocell

Order number EX12LED8W

EX12LED9W LED Infrared Illuminator

Infrared w/ 42 LEDs, 940 nm, Wide Beam 60°, 12/24

VRB, 0.5 amp, Photocell

Order number EX12LED9W

EX12LED‑3BD‑8M Infrared Illuminator

EX12LED IR Illuminator, 850 nm, 30 deg beam

Order number EX12LED-3BD-8M

EX12LED‑3BD‑8W Infrared Illuminator

EX12LED, IR Illuminator, 850 nm, 60 deg beam

Order number EX12LED-3BD-8W

EX12LED‑3BD‑9M Infrared Illuminator

EX12LED IR Illuminator, 940 nm, 30 deg beam

Order number EX12LED-3BD-9M

EX12LED‑3BD‑9W Infrared Illuminator

EX12LED, IR Illuminator, 940 nm, 60 deg beam

Order number EX12LED-3BD-9W

LTC 3764/20 Varifocal Lens IR corrected

1/2-inch, 4 – 12 mm, DC-iris, C-mount F1.2-360, 4-pin

Order number LTC 3764/20

5 | LTC 0630 Series Dinion2X Day/Night Camera

LTC 3774/30 Varifocal Lens IR corrected

1/2-inch, 10 – 40 mm, DC-iris, C-mount F1.4-360, 4-pin

Order number LTC 3774/30

TC8235GIT Ground Loop Isolation Transformer

Order number TC8235GIT

UPA-2410-60 Power Supply

120 VAC, 60 Hz, 24 VAC, 10 VA Out

Order number UPA-2410-60

UPA-2430-60 Power Supply

120 VAC, 60 Hz, 24 VAC, 30 VA Out

Order number UPA-2430-60

UPA-2450-60 Power Supply, 120 V, 60 Hz

Indoor, 120 VAC, 60 Hz In; 24 VAC, 50 VA Out

Order number UPA-2450-60

UPA-2420-50 Power Supply

220 VAC, 50 Hz, 24 VAC, 20 VA Out

Order number UPA-2420-50

UPA-2450-50 Power Supply, 220 V, 50 Hz

Indoor, 220 VAC, 50 Hz In; 24 VAC, 50 VA Out

Order number UPA-2450-50


S1374 Adapter converts C mount lens to CS mount camera

Order number S1374

Software Options

VP‑CFGSFT Configuration Software for cameras using Bilinx, includes VP-USB Adaptor

Order number VP-CFGSFT

Represented by:


Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, New York, 14450, USA

Phone: +1 800 289 0096

Fax: +1 585 223 9180 [email protected]

Europe, Middle East, Africa:

Bosch Security Systems B.V.

P.O. Box 80002

5617 BA Eindhoven, The Netherlands

Phone: + 31 40 2577 284

Fax: +31 40 2577 330 [email protected]


Robert Bosch (SEA) Pte Ltd, Security


11 Bishan Street 21

Singapore 573943

Phone: +65 6571 2808

Fax: +65 6571 2699 [email protected]

© Bosch Security Systems 2013 | Data subject to change without notice

2011301259 | en, V1, 29. Mar 2013


Bosch (Shanghai) Security Systems Ltd.

201 Building, No. 333 Fuquan Road

North IBP

Changning District, Shanghai

200335 China

Phone +86 21 22181111

Fax: +86 21 22182398

America Latina:

Robert Bosch Ltda Security Systems Division

Via Anhanguera, Km 98

CEP 13065-900

Campinas, Sao Paulo, Brazil

Phone: +55 19 2103 2860

Fax: +55 19 2103 2862 [email protected]


Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Indoor & outdoor CCTV security camera
  • CCD 25.4 / 2 mm (1 / 2") 768 x 494 pixels
  • Wired
  • Night vision
  • Box
  • Titanium
  • 450 g

Related manuals

Download PDF