UNIT 1 - eGyanKosh

UNIT 1 - eGyanKosh
Input and Output
Devices
UNIT 4 INPUT OUTPUT DEVICES
Structure
Page No.
4.0
Introduction
76
4.1
Objectives
76
4.2
Input Output Devices
76
4.3
What is a Port ?
78
4.3.1
Parallel Port
78
4.3.2
Serial Port
79
4.3.3
Universal Serial Bus (USB)
79
4.3.4
Small Computer System Interface (SCSI) Port
79
4.4
4.5
4.6
4.7
Input Devices
80
4.4.1
Keyboard
80
4.4.2
Mouse
81
4.4.3
Digitizing (Graphic) Tablet
82
4.4.4
Trackball
82
4.4.5
Joystick
83
Pick Devices
84
4.5.1
Light Pens
84
4.5.2
Touch Screens
84
Source Data Entry Devices
85
4.6.1
Digital Camera
85
4.6.2
Scanner
86
4.6.3
Optical Mark Reader (OMR)
86
4.6.4
Magnetic Ink Character Reader (MICR)
87
4.6.5
Bar-Code Reader
87
4.6.6
Magnetic Stripe Reader
87
Output Devices
88
4.7.1
CRT Monitor
88
4.7.2
LCD Monitor
89
4.7.3
Thin Film Transistor Liquid Crystal Display (TFT LCD)
90
4.7.4
LED Monitor
90
4.7.5
Projection Displays
90
4.7.6
Printers
93
4.7.7
Plotters
97
4.7.8
Speaker and Microphones
97
4.8
Summary
99
4.9
Answers to Check Your Progress
100
4.10
Further Readings
103
75
Basics of Computer
Hardware
4.0
INTRODUCTION
In the previous unit, we have discussed the history of computer systems and methods to
store data in computers. In this unit we shall discuss something about input/output
devices and their functions. Input/output devices constitute a major part of a computer
system. These are also called peripheral devices. Without I/O devices, a user cannot
communicate with the computer. They are required to enter data and instructions in a
computer so that the computer can process that data and provide the result to the user
through output devices. In computer, inputs are the signals and data received by the
system and outputs are the signals and data which are generated from the system.
First we will discuss briefly about input/output devices and then move on to the function
and structure of input and output devices. And finally, we will discuss about recent trends
in input devices such as digital camera, barcode reader, magnetic ink character
recognition and magnetic stripe reader such as ATM machines and Electronic Point of
Sale (EPOS).
4.1
OBJECTIVES
After studying this unit you should be able to understand:

the basic concepts of input/output devices;

functions of input/output devices;

types of input/output devices;

types of Ports;

types of monitors, printers, scanners and graphics tablet; and

newer technologies in computer hardware.
4.2
Inputs are data
or
signals
received by the
computer
system. An Input
unit takes the
input
and
converts it into
binary form, so
that it can be
understood by
the computer
76
INPUT OUTPUT (I/O) DEVICES
The computer will be of no use if it is not communicating with the external world. Thus,
a computer must have a system to receive information from the outside world and must
be able to communicate results to the external world. Thus, a computer consists of
input/output devices. Input and output devices can also be written as I/O devices.
Input and output devices of a computer system are the devices that connect you to
computer. Input devices let you to transfer data and user command into the computer
system. I/O devices are used to interact with the computer system. For example, you can
type in data by using a keyboard, or you can input data in picture form by using a scanner
in computer system.
On the other hand, output devices display the result of input data or signals after
processing it. Examples of these could be your computer’s monitor, which displays all
the programs which are running on the computer, as well as the printer, which will print
out a hard copy of the information which is saved in your computer.
Input and Output
Devices
Input and output devices allow the computer system to interact with the outside world by
moving data into and out of the computer system.
Examples of some input devices are:









Keyboard
Mouse
Joystick
Microphone
Bar code reader
Graphics tablet
Pen drive
CD/DVD
Digital Camera
An output device is used to send data out of the system. The user sees the result after
processing of data by the computer through output devices. Examples of some output
devices are:




Monitor
Printer
Plotter
Speaker
Input and output devices are also called I/O devices. They are directly connected to an
electronic module called I/O module or device controller. For example, the speakers of a
multimedia computer system are directly connected to a device controller called an audio
card, which in turn is connected to the rest of the system.
Input and output devices are similar in operation but perform opposite functions. It is
through the use of these devices that the computer is able to communicate with the
outside world.
Input data for the computer system could be in any of the following forms :



Manual inputs from a keyboard or console.
Analog inputs from instruments or sensors.
Inputs from a storage device, such as pen-drive, CD’s and Floppy Drives.
The speed of a processor is far more than the input devices, such as the keyboard of
computer system. Computer systems can process hundreds or thousands of computer
words or characters per second. Thus, a study of the first method, i.e. manual input
77
Basics of Computer
Hardware
reflects the inability of human-operated keyboards or keypunches to supply data at a
speed that matches the speed of digital computers.
 Check Your Progress - 1
Part I: State True/False
1)
2)
3)
4)
5)
6)
7)
Keyboard is an input device.
Monitor is an input device.
Printer is an input device.
Graphic Tablet is an input device.
Joy-stick is an output device.
Speaker is an output device.
Microphone is an input device.
True / False
True / False
True / False
True / False
True / False
True / False
True / False
Part II: Short answer type questions
1) What do you mean by input devices?
………………………………………………………………………………………….
………………………………………………………………………………………….
………………………………………………………………………………………….
2) What do you mean by output devices?
………………………………………………………………………………………….
………………………………………………………………………………………….
………………………………………………………………………………………….
3) Name some input and output devices.
………………………………………………………………………………………….
………………………………………………………………………………………….
………………………………………………………………………………………….
4.3
I/O ports are the
interfaces through
which computers
communicate with
external devices such as
printers, modems,
joysticks and terminals
WHAT IS PORT ?
Port is a connecting socket, outside the system into which different types of cables are
plugged. It is a specific place from which other devices can be physically connected. I/O
ports are the interfaces through which computers communicate with external devices
such as printers, modems, joysticks and terminals. There are many types of ports used in
computer system. Some of them are given as follows.
4.3.1 Parallel Port
Various peripherals can be connected through parallel port, which is a parallel
communication physical interface. A parallel port transmits 8 bits of a byte of data in
parallel. It is used for transmitting fast data over short distances. It is used to connect a
printer to a computer. Since a parallel port transmits an entire byte at a time, it operates
78
I/O devices at a relatively high speed. A Parallel port is primarily used to connect printers
to a computer and hence it is often called a printer port.
Input and Output
Devices
Figure 4.1: Parallel Port
4.3.2 Serial Port
Serial port transmits one bit of a byte, one at a time as a single stream of bits. It is meant
for transmitting slow data over long distances. Communication over a phone is an
example of serial communication. It is a serial communication physical interface which
transmits one bit at a time. Dial-up modems and serial mice use serial ports.
Figure 4.2: Serial Port
4.3.3 Universal Serial Bus (USB)
A USB Port can connect up to 127 peripheral devices such as a digital camera, digital
speakers, scanners, speakers etc. It permits Plug and Play – configuring of expansion
cards and peripheral devices as and when they are installed.
Figure 4.3: USB
4.3.4 Small Computer System Interface (SCSI) Port
SCSI-Small Computer System Interface Port allows data to be transmitted in a daisy
chain to up to 7 devices at a speed higher (32 bits at a time) than those possible with
serial and parallel ports. It is a fast data transmitting device and is used to connect HDD,
CD ROM drives and scanners with the computer system.
79
Basics of Computer
Hardware
4.4
INPUT DEVICES
In this section we will discuss various types of input devices used for entering data into
the computer system. These are:
4.4.1 Keyboard
It is the most common input device used for entering data and information into the
computer system. This is the standard input device attached to all computers. The
keyboard is a primary device for inputting text by pressing a set of keys. All the keys are
neatly mounted in a keyboard connected to the computer system. Keyboard devices can
be classified into two types general purpose keyboards and special purpose
keyboards. General purpose keyboard are standard keyboards used with most computer
system. They are called general purpose because that have enough keys to make them
useful for any type of application. The layout of keyboard is just like the traditional
typewriter of the type QWERTY. It also contains some extra command keys and function
keys. It contains a total of 101 to 104 keys. You have to press a correct combination of
keys to input data. The computer can recognize the electrical signals corresponding to the
correct key combination and processing is done accordingly.
The User can enter data into the computer by pressing a set of keys on the keyboard. In a
keyboard letters are printed on the keys. The first keyboard was developed in the 18th
century and was named as a QWERTY keyboard. A Computer keyboard includes
control circuitry which converts the key pressed by the user into key codes so that the
computer can understand it. Now-a-days wireless keyboards are also being used which
increase user freedom. The wireless feature is achieved by infrared signals or by radio
frequency.
In general, a computer keyboard has following keys :
1. Alphanumeric Keys: It includes letters and numbers.
2. Punctuation Keys: These include comma, period, semicolon etc. and
3. Special Keys: These can be function keys, control keys, arrow keys and Caps
lock keys etc.
80
Figure 4.4 : Keyboard
All the modern keyboards of computer are classified as:
Input and Output
Devices
(a) Original PC keyboard having 84 keys;
(b) Advance Technology (AT) Keyboard having 101-104 keys; and
(c) Multimedia Keyboard having 120 – 140 keys.
4.4.2 Mouse
A Mouse is a handy device which can be moved on a smooth surface to cause the
movement of a cursor on the screen. It is a pointing device which is used to input data
and information into the computer system by pointing on it. Physically, a mouse contains
a small case, held under one of the user’s hands with one or more buttons. For GUI-based
systems a mouse is an essential pointing-device. The cursor of the mouse moves in the
same direction in which the mouse ball rolls.
Figure 4.5: Mouse
Its name is derived from its shape, which looks a bit like a mouse, with its connecting
wire that one can imagine to be the mouse’s tail. A Mouse rolls on a small ball and has
two or three buttons on the top. When you roll the mouse across a flat surface on the
screen, sensors sense the mouse in the direction of mouse movement. The cursor moves
very fast with a mouse giving you more freedom to work in any direction. It is easier and
faster to move through a mouse compared to movement using keys.
Types of Mouse
Mouse could be mechanical, optical or cordless types. Further information regarding
these types are as follows :
Mechanical Mouse : Mechanical Mouse uses ball for the movement of cursor on the
computer screen. When the ball is rolled in any direction, a sensor of the mouse detects it
and also moves the mouse pointer in the same direction.
Optical Mouse : Optical Mouse uses Laser rays for the movement of cursor on the
computer screen. It is an advanced pointing device. Movement is detected by sensing
changes in the reflected light rather than the motion of a rolling sphere.
81
Basics of Computer
Hardware
Cord-Less Mouse : Cord-Less Mouse is battery driven and does not need any wire for
the physical connection with the motherboard. It transmits data through infrared or radio
signal.
Computer mice are very useful in designing pictures and graphs and computer and video
games by multimedia designers. A Mouse pad is required to move the mouse because it
provides a smooth surface. However, an optical or laser mouse doesn’t require a mouse
pad.
4.4.3 Digitizing (Graphic) Tablet
These are used
by architects,
engineers and
designers in
Computer Aided
Design (CAD)
for designing
purposes, such
as buildings,
cars, mechanical
parts, robots etc.
Digitizing or Ggraphics’ tablet is a computer input device that allows one to hand-draw
images and graphics, similar to the way one draws images with a pencil and paper. These
tablets may also be used to capture data of handwritten signatures. Some tablets are
intended as a general replacement for a mouse as the primary pointing and navigation
device for desktop computers. These are used by architects, engineers and designers in
Computer Aided Design (CAD) for designing purposes, such as buildings, cars,
mechanical parts, robots etc. These are also used in Geographical Information System
(GPS) for digitizing of maps.
Figure 4.6: Graphics Tablet
Graphics tablet is most suited for artists and those who want the natural feel of a pen-like
object to manipulate the cursor on their screen. Wacom is the most well known
manufacturer of graphics tablets, and is incredibly well respected.
4.4.4 Trackball
Trackball is a moveable ball mounted on a stationary device, which can be rotated
manually by using fingers. It is also a pointing device. In a trackball, the ball is placed on
the top along with buttons which can be rolled with the fingers. These are used in playing
video games.
82
Figure 4.7: Trackball
Mouse and mobile phones are equipped with trackballs to navigate addresses as well as
play games.
Input and Output
Devices
4.4.5 Joystick
Joystick is a remote control device for a computer which is used for playing video games
to indicate the position. It has a stick that pivots on a base and is used for controlling the
action in video games. The User moves a spherical ball with the help of a stick in the
joystick as opposed to the trackball where fingers are used for moving the ball.
Joysticks are also used for controlling machines such as cranes, trucks, underwater
unmanned vehicles, flight simulators, industrial robots etc.
Figure 4.8: Joystick
The Joystick shown in Figure 4.8 has a base and a handle for controlling the movement
of the cursor on the screen.
 Check Your Progress 2
Part I: True / False
1)
Cordless mice are directly connected with computer.
True / False
2)
Mechanical mice use laser rays for movement.
True / False
3)
Mouse is not a pointing device.
True / False
4)
Floppies are used to store data.
True / False
5)
Scanner is used to print documents.
True / False
6)
Printer is used to display pictures.
True / False
7)
Monitor is used to scan pictures.
True / False
Part II: Short answer type questions
1) What do you mean by keyboard?
…………………………………………………………………………………
…………………………………………………………………………………
………..………………………………………………………..………………………
2) What do you mean by mouse and what are its types?
…………………………………………………………………………………
…………………………………………………………………………………
………..………………………………………………………..………………………
83
Basics of Computer
Hardware
3) What do you mean by scanners and what are their functions?
…………………………………………………………………………………
…………………………………………………………………………………
………..………………………………………………………..………………………
4) What do you mean by joystick and trackballs in a computer system?
…………………………………………………………………………………
…………………………………………………………………………………
………..………………………………………………………..………………………
4.5
PICK DEVICES
Pick devices are used to select an object on the screen. The selected object can be text or
graphics. Examples of pick devices are light pens and touch screens.
4.5.1 Light Pens
A Light pen is a pen like light-sensitive device. It is connected by a wire to the computer
terminal to detect the CRT beam when pointed towards the screen and generate a narrow
electrical pulse that can be fed to the computer as an input signal.
It is used to draw on the screen or to point to the displayed objects. It operates by
detecting the light emitted by the screen phosphors.
A light pen can
work with any CRT
monitor but not
with LCD monitors
A light pen can work with any CRT monitor but not with LCD monitors. It is used by
architects and engineers for CAD applications and editing.
Figure 4.9: Light Pen
4.5.2 Touch Screens
Touch screens are monitors / electronic visual display screens which detect where they
are being touched. The user makes selections by directly touching the screen, rather than
moving a cursor to the point on the screen with a mouse or joystick
Now days touch screens are being used in ATM machines for making it user friendly and
Kiosk machines are used for guiding the travelers about their travel plans. Touch screens
are also used in many of the modern cell phones.
84
Input and Output
Devices
Figure 4.10: Touch Screen
4.6
SOURCE DATA ENTRY DEVICES
Entry of data into a computer system directly from the source, without transcription is
called source data entry. Source data entry devices have a lower probability of error in
input data than standard keyboard entry.
Some of the common source data entry devices are discussed below:
4.6.1 Digital Camera
A Digital camera is an electronic device which takes video or still photographs or both,
digitally by recording images via an electronic image sensor. Digital cameras can do
things which film cameras can’t, for example displaying images on screen immediately
after they are recorded.
Images recorded on a digital camera can be cropped for editing, deleted and various types
of special effects can be created by using Photoshop software.
Digital cameras look like ordinary cameras but have sufficient memory in the form of
chips to store thousands of images, rather than using photographic films.
Figure 4.11: Digital Camera
Most digital cameras allow users to choose the resolution needed for a picture. Most of
those can connect directly to a computer to transfer data. A USB port is generally used
for this purpose. A Wireless connection can also be used for connecting to a computer via
Bluetooth.
85
Basics of Computer
Hardware
These cameras use memory cards with flash memory to store images. The joint
photographing expert’s group standard (JPEG) is the most common file format used for
storing data in a camera. Other formats include raw image format, DNG format etc.
4.6.2 Scanners
A Scanner is an input device and is used to input data into the computer system in the
form of pictures. It optically scans images, printed text, handwriting, or an object, and
converts it to a digital image. Examples of scanners are a desktop or flatbed scanner.
In scanners the document is placed on a glass window for scanning. Mechanically driven
scanners that move the document are typically used for large-formatted volume of
documents.
Figure 4.12: Optical Scanner
Another type of scanner is a planetary scanner. This scanner takes photographs of books
and documents. Three dimensional scanners are used for producing three-dimensional
models of objects.
4.6.3 Optical Mark Recognition (OMR)
Universities and
colleges often
use OMR for the
evaluation of
OMR sheets for
competitive
exams
OMR is the scanning of paper to detect the presence or absence of a mark in a
predetermined position. Now days, it is used as an input device for source data entry
purposes. Universities and colleges often use OMR for the evaluation of OMR sheets
for competitive exams. OMR sheets consist of multiple choice question papers and
students are required to make a mark to indicate their answers. OMR is used in the
evaluation of questionnaires, surveys and university exam OMR sheets.
Figure 4.13: Optical Mark Recognition
86
4.6.4 Magnetic Ink Character Recognition (MICR)
Input and Output
Devices
Magnetic Ink Character Recognition is a character recognition system that uses special
ink and characters. When a document that contains this ink needs to be read, it passes
through a machine, which magnetizes the ink and then translates the magnetic
information into characters.
MICR technology is used by banks for faster processing of large volumes of cheques.
Numbers and characters found on the bottom of checks (usually containing the check
number, sort number, and account number) are printed using Magnetic Ink. To print
Magnetic Ink codes, we need a laser printer that accepts MICR toner.
MICR provides a secure, high-speed method of scanning and processing information.
This technology is used for processing large volume of data. It speeds up data input for
the bank because cheques can be directly fed into the input device as it also ensures
accuracy of data entry. The most commonly used character set by MICR devices are
known as E13B font which consists of the numerals 0 to 9, and four special characters.
MICR
technology is
used by banks
for faster
processing of
large volumes of
cheques
4.6.5 Bar Code Reader
A barcode reader is an electronic device which is used to read printed barcodes. Barcodes
represent alphanumeric data which is a combination of vertical lines (bars) that vary in
width and length. It is a fast and effective way to input data. A Barcode reader uses a
laser beam to read the series of thick and thin lines which represent the bar code number.
Figure 4.14: Bar Codes
Figure 4.15: Bar Code Reader
The bar code is 13 digits long and it has four main divisions. The First two digits of a bar
code represent the country, the second part represents the manufacturer’s code (five
digits) the third part represents the product code (five digits) and the last digit is a check
digit.
4.6.6 Magnetic Stripe Reader
A magnetic reader is a hardware device which is used to read the information encoded in
the magnetic stripe located at the back of a credit/debit card. A bank card holds data
about the owner of the card, bank account number and code of the bank branch, where
the account is held.
87
Basics of Computer
Hardware
Figure 16: ATM Machine with Card
Figure 17: Magnetic Stripe Reader
Magnetic stripe readers are often used at supermarkets and in many different types of
shops. In these machines data is read electronically and the point of sale is called
Electronic Point of Sale (EPOS).
There are several other pick devices such as microphones and speakers. These have been
discussed in length under the section Out Put Devices section of this unit.
4.7
OUTPUT DEVICES
One of the most important output devices in computer system is its screen commonly
called monitor. It is an output device and displays all the programs and applications
which are running on the computer system. A Monitor is the visual display unit of the
computer system. It displays images generated from the video output. It displays images
without keeping a permanent record.
A Graphic display
is made up of a
series of dots called
‘pixels’ (picture
elements) whose
pattern produces
images in computer
system
A Graphic display is made up of a series of dots called ‘pixels’ (picture elements) whose
pattern produces images in computer system. Each dot on the screen is defined as a
separate unit which can be addressed separately. Since each dot on the screen can be
controlled separately it gives greater flexibility in drawing pictures. The Number of dots
per inch (dpi) is called the resolution of the screen and represents the quality of the
computer system.
4.7.1 Cathode Ray Tube Monitors (CRT)
Monitors display what is going on in your computer. They can run at various resolutions.
It is the part of computer which looks like a TV set. After typing the characters from the
keyboard, we can see them on the monitor.
The main components of a CRT monitors are the electron gun, the electron beam
controlled by an electromagnetic field and phosphor coated display screen. These older
monitors are bulky and require a lot of space for installation.
88
Input and Output
Devices
Figure 4.18: Normal CRT monitor and its internal working diagram
In CRT monitors, the image is projected on the screen by directing the electron beam
onto the computer screen. To precisely direct the electron beams, copper steering coils
are used to create a magnetic field inside the tube. By applying varying voltages to the
copper coils a beam can be positioned at any point on the screen.
4.7.2 Liquid Crystal Displays (LCD)
First introduced in watches and clocks in the1970’s, LCDs are now used to display
images in monitors. A newer technology in computer screens is TFT LCD monitors.
These are light weight monitors and are used in laptop computers. Active matrix structure
is used by most of the modern LCD monitors and television sets. In this technology, a
matrix of thin-film transistors (TFT) is added to the polarizing and color filters. It
enhances the display to make it look brighter and sharper. It can also produce much better
images and have quicker response times.
Figure 4.19: LCD monitor
89
Basics of Computer
Hardware
These monitors are portable, reliable and consume less electricity. Images produced by
these monitors are of better quality than that of old CRT monitors. The LCD monitors
have very high resolution and emit less radiation than CRT monitors. The screen is also
flicker free.
4.7.3 Thin Film Transistor Liquid Crystal Display (TFT LCD)
It is type of monitor which used thin film transistor technology to enhance the
image quality of LCD Monitors. These are used as monitor in television set,
desktop computer, laptop computer and mobile phones etc.
4.7.4 Light Emitting Diodes Monitors (LED)
Light Emitting Diodes (LED) is the latest technology which is being used now a days for
making high definition TV screens and monitors. It is a semi-conductor light source. In
this technology diodes are used to light up the screen instead of liquid crystal Diodes.
LED is known as light emitting diode. It is an electronic device that lights up when
electricity is passed through it. LEDs are usually red. They are good for displaying
images because they can be relatively small, and they do not burn out. However, they
require more power than LCD monitors. LED is light weight monitors and is used in
laptop computers and in TV.
The Life of LED monitors is three times than that of LCD monitors and they have less
warm up time than that of CRT or LCD monitors. These monitors require less space on
the desk, less power consumption and have flicker free screen.
4.7.5 Projection Displays
These are normally used for large group presentations. These systems can be connected
to a computer and whatever appears on the computer terminal gets enlarged and projected
on a large screen. Video projector receives video signals and projects the corresponding
image on a projection screen. It uses a lens system for this projection.
Figure 4.20 : LCD Overhead Projector
These are popularly used for seminars, class room lectures, marketing presentations and
conference room presentations etc.
90
Classification of monitors on the basis of color
Input and Output
Devices
In terms of color capabilities, monitors can be divided into the following groups:
1. Monochrome : These monitors display the result in two colors, i.e., black/white,
green/black, amber/black. One color is for the background of the screen and other for
the foreground.
2. Gray Scale: It is a monochrome type of monitor. But it displays the output by using
different shades of gray, made by a combination of black and white.
3. Color Monitor: It can display the output in many colors, ranging from 16 to over 1
million different colors. These are also called as RGB monitors, because they accept
three separate signals, which are red, green, and blue.
Classification of monitors on the basis of size
After color classification, the most important aspect of a monitor is its screen size. The
Size of computer screen is measured in diagonal inches and is given by measuring the
distance from one corner to the opposite corner (diagonally). The smallest size for VGA
monitors is 14 inches, which is also the entry level monitor for most computer systems.
The Larger size landscape monitors can display two full pages side by side at a time.
Other typical monitor sizes are 17 inches, 20 inches, 23 inches etc.
Classification of monitors on the basis of Resolution
The resolution of a monitor means the number of pixels per inch appearing on its surface.
In general the greater the number of pixels the sharper is the images. Most modern
monitors can display 1024 by 768 pixels. Some high-end models of computer monitors
can display 1280 by 1024, or even 1600 by 1200 pixels. Even 3280 by 2048 resolution
monitors are available for special purposes. While CRTs provide variability in resolution
LCDs monitor have a fixed resolution.
The
greater the
number of
pixels the
sharper is
the images
Classification of monitors on the basis of signal
Computer monitor can be divided into two categories on the basis of the type of signal
which they accept. These are:
1. Analog Monitor
2. Digital Monitor
Analog Monitor
The Electronic signal that is sent by signals of varying frequency, amplitude or phase
instead of being sent as an ON or OFF data transmission is called an analog signal.
Analog signals allow equipment to handle information that continuously changes such as
voltage, current, etc.
91
Basics of Computer
Hardware
Analog signals can be represented by a wave sign and watches which changes their
position continuously as shown in Figure 4.21
Figure 4.21: Examples of Analog Signal
These are the traditional type of color monitors and are based on CRT technology. These
work like the television screen and accept analog signals.
Digital Monitor:
An electronic signal that is sent as binary digits of either ON or OFF is called a Digital
signal. As shown in Figure 4.22 examples of digital signals and how they look like. In the
first diagram signals are either 0 or 1 i.e. up or down for ON and OFF mode. In the right
digital pictures are shown where a pixel is either ON or OFF helping to create an image
on the display screen.
Figure 4.22: Examples of Digital Signal
The digital monitor receives digital signals and can use CRT technology. The data in
these monitors is received from the video adapter. These are of different types such as
CGA (Color Graphics Adapter), EGA (Enhanced Graphics Adapter), VGA (Video
Graphics Array), and SVGA (Super Video Graphics Array). These are fast and produce
clear images.
 Check Your Progress 3
Part I: True / False
1)
2)
3)
4)
5)
6)
Pick devices are used to pick objects on the monitor
CRT monitors consume more electricity than LCD monitors
Light Emitting Display is the full form of LED monitors
Bar Code Reader is an OUT PUT Device
A Graphics tablet can be used as a mouse.
Graphic tablets are used for designing purposes.
True / False
True / False
True / False
True / False
True / False
True / False
Part II: Short answer type questions
92
1) What is the function of Graphic Tablet?
…………………………………………………………………………………………
………………………………………………………………………………………….
………..……………………..…………………………………………………………
2) What do you mean by multimedia graphics tablet?
…………………………………………………………………………………………
………………………………………………………………………………………….
………..……………………..…………………………………………………………
3) What do you meany by Computers Microphones ?
…………………………………………………………………………………………
………………………………………………………………………………………….
………..……………………..…………………………………………………………
4) What do you mean by barcode reader?
…………………………………………………………………………………………
………………………………………………………………………………………….
………..……………………..…………………………………………………………
5) What do you mean by digital camera? Explain its various characteristics.
…………………………………………………………………………………………
………………………………………………………………………………………….
………..……………………..…………………………………………………………
Input and Output
Devices
4.7.6 Printers
Printers are used for producing output on paper. There are a large variety of printers and
printing devices which can be classified according to the print quality and printing speed.
These varieties of printers are:
Printing Technology – impact printers vs. non impact printers
Impact printers use variations of the standard typewriter printing mechanism where a
hammer strikes paper through an inked ribbon.
A non Impact printer uses chemical, heat or electrical signals to produce symbols on
paper. Some of these require special coated or treated paper to print characters on them.
Classification of printers on the basis of speed :
On the basis of speed printers are of following types
1. Character Printer : These printers can print only one character at a time. They work
similar to a typewriter. The examples are Daisy Wheel Printer, Dot Matrix Printer and
Inkjet Printer.
(a) Daisy-Wheel Printer : This printer is similar to a ball-head typewriter. This type
of printer has a plastic or metal wheel on which the shape of each character is
embossed.
93
Basics of Computer
Hardware
Figure 4.23: Daisy-Wheel Printer
A hammer presses the wheel against a ribbon, which in turn makes an ink stain in
the shape of the character on the paper. Daisy-wheel printers produce letterquality print but cannot print graphics. The print quality of this impact printer is
very low as is the speed. These are practically obsolete now.
(b)
Dot-Matrix Printer : This is one of the most popular printers used for
personal computing systems. These printers are relatively cheaper
compared to other technologies and use impact technology.
In the 1970s and 1980s, dot matrix impact printers were generally considered the best
tradeoff between expense and versatility, and until the 1990s they were by far the
most common form of printers used with personal computers. Characters in this
printer are formed by the combination of dots.
Figure 4.24: Dot Matrix Printer
A Dot-Matrix printer creates characters by striking pins against an ink soaked ribbon.
Each pin makes a dot and combinations of dots form characters and illustrations. The
moving portion of the printer is called the print head.
Figure 4.25: Characters as a pattern of dots
94
Advantages



Input and Output
Devices
Dot matrix printers, like any impact printer, can print on multi-part stationery or
make carbon copies.
Impact printers have one of the lowest printing costs per page. As the ink is running
out, the printout gradually fades rather than suddenly stopping part of the way
through a job.
They are able to use continuous paper rather than requiring individual sheets, making
them useful for data logging. They are good, reliable and ideal for use in situations
where printed content is more important than print quality.
Disadvantages



Impact printers are usually noisy.
They can only print low resolution graphics, with limited color performance, and
limited quality.
These printers are slow. Speed can be 225 cps to 250 cps. Speed may vary from one
printer to another.
2. Line Printer: As the name suggests a line printer is a high speed printer which is used
to print one entire line of text at a time. Line printers are used to print large amount of
data, printing labels, accounting work and other large business printing applications in
data centers. These are fast printers ranging in speed from 300 to 2500 lines per
minute. Examples are Drum Printers and Chain Printers.
3. Page Printer: These are very high speed printers which produce high quality output.
Their speed ranges from10-25 pages per minute. These printers are commonly used
today. They use modern Laser Printer technology and print a whole page at one go.
There are many varieties of laser page printers and so their prices range from base
level upwards.
Classification of printers on the basis of quality
The various types of printers based on print quality are as follows
1. Ink-jet Printer: The Inkjet printer works on inkjet technology and produces
better quality printouts than dot matrix printers. These print by spraying a
controlled stream of tiny ink droplets accurately on the paper forming either dot
matrix or solid characters.
The printing quality of these printers is very good with a speed of 700 or more
characters per second. These are non-impact and hence are relatively silent during the
printing process. These printers are easy to use and can be used to print color pages.
Advantages
Compared to other printers, inkjet printers have a number of advantages. These are
95
Basics of Computer
Hardware



They are quieter in operation than impact printers.
They can print finer, smoother details through higher print head resolution
They can produce photographic-quality text and images.
Figure 4.26: Ink-Jet Printer
Disadvantages
The disadvantages of Inkjet printers are :


The ink is often very expensive.
Many intelligent ink cartridges contain a microchip that communicates the estimated
ink level to the printer; this may cause the printer to display an error message, or
incorrectly inform the user that the ink cartridge is empty.
 The very narrow inkjet nozzles are prone to clogging with dried ink.
2. Laser Printer : This is a high quality, high speed and high volume technology
printer. In laser printers, a laser beam is used to produce an image on a drum. The
light of the laser alters the electrical charge on the drum wherever it hits it. The drum
is then rolled through a reservoir of toner, which is picked up by the charged portions
of the drum. Finally, the toner is transferred to the paper through a combination of
heat and pressure. Laser printers produce very high quality text and graphics but are
expensive. The technology used by them is the same as that of photocopying
machines. The speed of laser printers varies from 10 pages per minute to 200 pages
per minute. Laser printers are also called page printers; because they print a whole
page at one go.
Standard laser printers can be classified into two categories in terms of color:

Monochrome laser printer, and

Color laser printer

96
Figure 4.27: Laser Printer
Monochrome laser printers use a single toner. Color laser printers use four toners to print
in full color. These printers are about five to ten times as expensive as their monochrome
siblings. Color laser printers are popular and are being widely used, in spite of their cost.
To print documents with graphics and photographs a color laser printer is a good option.
Print speed, quality, printer resolution, reliability and the costs of toner are the major
deciding factors for choosing a printer.
4.7.7
Input and Output
Devices
Plotters
A Plotter is a device that draws pictures on a page as output, after receiving a print
command from the computer. It is also called a graph plotter. In plotters pens are used to
draw lines on the paper, which is placed in the plotter.
Figure4. 28: Plotter
Plotters produce high quality diagrams on the paper and their output quality is good.
Engineers, architects and planners use plotters to generate high quality, high-precision
graphic output of different sizes. For several design applications such as design of layout
of an aircraft, car, and architectural design of a building and in other computer-aided
design applications plotter are very useful.
Plotter is of two types:

Drum Plotter

Flat-Bed Plotter
Engineers,
architects and
planners use
plotters to
generate high
quality, highprecision
graphic output
of different
sizes
The drum plotters are generally smaller than flatbed plotters and they have lower
resolutions than flatbed plotters. HP, Canon and Epson are the popular companies which
manufacture good quality of platters.
4.7.8 Speakers and Microphones
Speaker
Computer speakers, or multimedia speakers, are external speakers, commonly equipped
with a low-power internal amplifier which produces sound as output. External speakers
are connected with a computer by using a plug and socket.
97
Basics of Computer
Hardware
Speaker
Stand
Volume
Control
Figure 4.29: Multimedia Speakers
Computer speakers range widely in quality and in price. Laptop computers have inbuilt
speakers.
Microphone
A Microphone is an acoustic-to-electric transducer or sensor and is used to convert sound
signals into electrical signals. It was originally invented by Emile Berliner in 1877, and
allows you to record voices or sounds and place them onto computers, generally as a
wave file.
Figure 4.30: Voice Recording Microphone
To connect a microphone we insert the plug of it into the back of the computer system.
Integrated microphones can be found on laptops and some desktop monitors. These
microphones are usually a small hole in front of the computer which when spoken into,
will record your voice.
98
 Check Your Progress 4
Input and Output
Devices
Part I: State true or false.
1) Daisy-wheel printers prints high quality printing.
True/False
2) A Dot-Matrix printer is a character printer.
True/False
3) A Monochrome laser printer uses four toners.
True/False
4) Color laser printers use a single toner to print.
True/False
5) Laser printers are very cheap.
True/False
Part II: Short answer type questions
1) What do you mean by speakers?
………………………………………………………………………………………….
………………………………………………………………………………………….
………..……………………..………………………………………………………….
2) What do you mean by printers? What are the various types of printers ?
………………………………………………………………………………………….
………………………………………………………………………………………….
………..……………………..………………………………………………………….
3) What do you mean by plotters? Explain their characteristics.
………………………………………………………………………………………….
………………………………………………………………………………………….
………..……………………..………………………………………………………….
4) What do you mean by a dot-matrix printer?
………………………………………………………………………………………….
………………………………………………………………………………………….
………..……………………..………………………………………………………….
5) What do you mean by Laser Printers?
………………………………………………………………………………………….
………………………………………………………………………………………….
………..……………………..………………………………………………………….
4.8
SUMMARY
Input/output devices are the devices that connect you to your computer. Input devices let
you input data and other information into your computer and they also let you give your
computer special instructions so that it will know what to do. For example, you can type
in data by using a keyboard, or you can input data in picture form by using a scanner.
On the other hand, output devices display the results of your computer’s computations.
Examples of these would be your computer’s monitor, which displays all of the programs
you’re running, as well as the printer, which will print out a hard copy of the information.
Source data entry devices are those devices which automatically capture data and images
at its source, record it in small chips and produces images immediately.
99
Basics of Computer
Hardware
4.9
ANSWERS TO CHECK YOUR PROGRESS
Check Your Progress 1
Part I:
(1) True
(6) True
(2)
(7)
False
True
(3)
False
(4)
True
(5) False
Part II: Short answer type questions
1.
Input devices let you input data and other information into the computer. They
are used to give special instructions to the computer so that it will know what to
do. Input devices transfer data and user commands into the computer system.
Input devices are used to interact with the computer system. Inputs are data or
signals received by the computer system.
For example, you can type in data by using a keyboard, or you can input data in
picture form by using a scanner.
2.
Output devices display the result of your computer’s computations. Examples of
these are your computer’s monitor. Output devices are those devices which
display the result of input data or signals after processing it. When data is given
to the computer to process then the processed data, in form of the desired result,
comes out of the system through output devices.
3.
Examples of Input devices are:
Keyboard, Mouse, Joystick, Microphone, Bar code reader and Graphics tablet.
Examples of output devices are:
Monitor, Printer, Plotter and Speaker
Check Your Progress 2
Part I:
(1) False
(7) False
(2) False
(3) False
(4) True
(5) False
(6) False
Part II: Short answer type questions
100
1.
A Keyboard is one of the most important input devices and is used to input data into
the computer system. Keyboards contain letters, numbers, function keys, arrow keys
and some special keys on it. A User enters data into the computer by pressing a set of
keys on the keyboard.
2.
A Computer mouse is an input device. It is used to point on the instructions and
commands are input by clicking on them by it. A mouse has two or three buttons
on it and is moved on a mouse pad which gives a smooth surface for its movement.
A Mouse is a very useful input pointing device in a GUI environment.
Input and Output
Devices
Different types of mice are: Optical mouse, mechanical mouse, wireless mouse
3.
4.
A Scanner is an input device which is used to input data in the form of pictures. It
optically scans images, printed text, handwriting, or an object, and converts it to a
digital image.
A Joystick is a remote control device for a computer which is used for playing
video games to indicate position. It has a stick that pivots on a base and is used for
controlling the action in video games. A Joystick is an input device of a computer.
Joysticks are also used for controlling machines such as cranes, trucks, underwater
unmanned vehicles, flight simulators, industrial robots etc.
A Trackball is a moveable ball mounted on a stationary device. It can be rotated
manually by using the fingers. It is also used in playing video games. In Modern
computers, a Mouse and in mobile phones trackballs are used to navigate addresses
as well as play games. These are also used in playing video games.
Check Your Progress 3
Part I:
(1) True
(2) True
(3) True
(4) False
(5) True (6)
True
Part II: Short answer type questions
1.
Digitizing or Ggraphics’ tablet is a computer input device that allows one to handdraw images and graphics, similar to the way one draws images with a pencil and
paper. These tablets may also be used to capture data of handwritten signatures.
2.
A graphics tablet is a computer input device that allows one to hand-draw images
and graphics, similar to the way one draws images with a pencil and paper with the
natural feel of a pen-like object to manipulate the cursor on their screen. These
tablets are used to capture data of handwritten signatures. Architects, engineers and
designers use it in Computer Aided Design (CAD) for designing purposes.
3.
A microphone is an acoustic-to-electric transducer or sensor that converts sound
signals into electrical signals. A microphone is an input device which converts the
sound and voice into digital signal and then gives it to the computer for further
processing.
4.
A barcode reader is an electronic device which is used to read printed barcodes. It
is a fast and effective way to input data. A Barcode reader uses a laser beam to read
the series of thick and thin lines which represent the bar code number.
101
Basics of Computer
Hardware
5.
A Digital camera is an electronic device which takes video or still photographs or
both, digitally by recording images via an electronic image sensor. Digital cameras
have sufficient memory in form of chips. Most digital cameras allow users to
choose the resolution. The digital cameras can connect directly to a computer to
transfer data. A Wireless connection can also be used for connecting to a computer
via Bluetooth. These cameras use memory cards with flash memory to store
images.
Check Your Progress 4
Part I:
(1) False
(2) True
(3) False
(4) False
(5) False
Part II: Short answer type questions
1.
2.
Computer speakers are output devices which produces sound as output. Computer
speakers, or multimedia speakers, are external speakers, commonly equipped with
a low-power internal amplifier. These are used to hear audio signals in a computer
system.
A Printer is an output device and lets you take printouts of documents, pictures,
and other files. It creates a hard copy of computer documents or files on a piece of
paper. Whatever we see on the computer screen can be printed on a paper using a
printer.
There are many different types of printers available in the market. Printers are
mainly categorized into the following types:
Impact Printers
a) Line Printers
1. Drum Printers,
2. Chain Printers
b) Character Printers 1. Dot Matrix Printer
2. Daisy Wheel Printer
c) Non impact Printer
1. Thermal Printers
2. Inkjet Printers
3. Laser Printers
102
3.
A Plotter is an output device which is used to produce high quality graphics on
paper. Engineers, architects and planners use plotters to generate high quality,
high-precision graphics output of different sizes. For several design applications
such as design of layout of aircraft, car and architectural design of a building and in
other computer-aided design applications plotters are very useful.
4.
A Dot matrix printer or impact matrix printer refers to a type of printer with a print
head that runs back and forth on the page and prints characters by impact, striking
an ink-soaked cloth ribbon against the paper, much like a typewriter. Its speed is
5.
50 cps (character per second) to 400 cps. It has one of the lowest printing costs
per page.
Laser printers are one of the best printers available due to their high quality, high
speed and high volume technology of printing. These printers produce very high
quality text and graphics. Speeds of laser printers can range from 10 pages per
minute to 200 pages per minute.
Input and Output
Devices
4.10 FURTHER READINGS
V. Rajaraman, Fundamentals of Computers, PHI Publication.
Alexix Leon, Mathews Leon, Introduction to Computers, Leon Press.
E Balagurusamy, Fundamentals of Computers, Tata Mcgraw Hill Publication.
Rohit Khuran, Introduction to Computer Science, ITL Education Solution and
Pearson Education Press.
Deborah Morley, Charles S. Parker, Fundamentals of Computers, Taj Press.
Dr. Aditi Markale, Dr, Onkar Nath, Introduction to Computers, Macmillan Press.
V. C. Jain, Computer Fundamentals and Personal Computer Software BPB
Publication.
Pradeep K Sinha, Priti Sinha, Computer Fundamentals, BPB Publication.
Web Links:
 www.sciencedirect.com,
 www.ieee.org,
 www.webpedia.com,
 www.microsoft.com,
 www.freetechbooks.com,
 www.computer basics.com,
 www.youtube.com.
103
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement