Tycon Data Sheet

Tycon Data Sheet
TP-DCDC - HP
DATA SHEET
High Power DC to DC Converter
Features









Input Voltage 24VDC or 48VDC
Passive POE Output voltage 24VDC or 56VDC
IEEE802.3at Model Available
High Power up to 35W
Dual DC Inputs for connecting 2 power sources
Integrated POE Inserter
Low self consumption power
Short Circuit, Over Current and Reverse/Over Voltage Protection
High Temperature Operation
TP-DCDC-HP
Applications
 24V and 48V Battery Systems
 Wireless Access Points and Client Devices
 IP Phone and Security Camera Systems
Description
The TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability
solution for those requiring 56VDC Power Over Ethernet voltage from a 24V or 48V battery system. They have an
integrated POE injector to apply the 24VDC or 56VDC to the CAT5 Ethernet cable. Passive POE and 802.3at models
are available. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack.
They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for
surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the
units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are
negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT) are available to split the data and DC
voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER cable can be used.
Device Pinouts
RJ-45 Input (Data Only)
RJ-45 Output (Data & Power)
Pin
Symbol
Description
Symbol
Description
1
2
3
4
5
6
7
RX+
RXTX+
NC
NC
TXNC
Data Receive(+)
Data Receive(-)
Data Transmit(+)
No Connection
No Connection
Data Transmit(-)
No Connection
RX+
RXTX+
+Vdc
+Vdc
TX-Vdc
Data Receive(+)
Data Receive(-)
Data Transmit(+)
DC power(+)
DC power(+)
Data Transmit(-)
DC power(-)
TP-DCDC - HP
Page 2
8
NC
No Connection
-Vdc
DC power(-)
Specifications
Input Voltage
TP-DCDC-2448-HP
TP-DCDC-4824-HP
TP-DCDC-4848-HP
TP-DCDC-4848D-HP
+/- 18VDC to 36VDC
+/- 36VDC to 72VDC
+/- 36VDC to 72VDC
+/- 36VDC to 72VDC
DC Input Connector
Removeable Screw Type Compression Wire Terminal (12 AWG Max)
POE Specification
Passive
Output Voltage (+/-2.5%)
Data in & Data/POE
Output Connector
Output Current (max)
56VDC
IEEE 802.3at
24VDC
56VDC
56VDC
0.5A
0.625A
RJ45 (Shielded)
0.5A
1.25A
Output Power (max)
30W
35W
Self Consumption Power
2W
Efficiency (min)
75%
Line Regulation
1%
Load Regulation
5%
Ripple
1%
Noise
1%
EMC Standards
FCC Class B NE55022 Class B
Safety Standards
UL1950, CSA 22.2 &TUV EN60950
Operating Temperature
-30 to +60°C (-22 to +140°F)
Operating Humidity (RH)
5% - 90%
Storage Temperature
-40 to +80°C (-40 to +176°F)
125 x 75 x 38mm (4.9 x 3 x 1.5”)
Dimensions (LxWxH)
Weight
Notes:


300g (10.6oz)
All shipments F.O.B. Draper, UT 84020
Tycon Power Systems Power Sources carry a 1 year warranty
DC Input Connector
System Ordering:
TP-DCDC-2448-HP +/- 18-36VDC IN 56VDC OUT, 30W DC to DC Converter with POE Inserter
TP-DCDC-4824-HP +/- 36-72VDC IN 24VDC OUT, 30W DC to DC Converter with POE Inserter
TP-DCDC-4848-HP +/- 36-72VDC IN 56VDC OUT, 30W DC to DC Converter with POE Inserter
TP-DCDC-4848D-HP +/- 36-72VDC IN 56VDC OUT, 35W DC to DC Converter with 802.3at POE Inserter
For further information contact:
Tyconpower.com
693 Draper Heights Way Ste 102
Draper, UT 84020
PH: 801-432-0003
FAX: 801-618-4220
TP-DCDC-HP Spec Rev 4
3-May-12
Specifications Subject to Change Without Notice
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement