AGRICULTURAL PRODUCTS JOHN DEERE COMBINES S650

AGRICULTURAL PRODUCTS JOHN DEERE COMBINES S650
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Equipment for Base Machine
PREMIUM OPERATOR'S CAB:
Pressurized Cab with HVAC ClimaTrak
Premium Storage Package
Premium operator's seat
Actively Cooled Refrigeration Unit
Windshield Wiper (2 Blades) with Washer Dual
Tilt-Telescoping Steering Column
Seat with Air Suspension
Training Seat
Driver and Training Seat Belts
Beacon lights
Pull-down front sunshade 3-Position Pivoting
Operator's Ladder
Two adjustable heated cab mounted mirrors
Large Cup Holders
Auxiliary Power Outlet Strip
Business Band Radio Pre-wire
Basic Radio Package AM/FM Stereo Radio and
CD-Player
Antenna and two speakers
Auxiliary input jack located on front of radio
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Electro-Hydraulic Controlled header and separator
controls
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
CommandCenter color display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold (if
equipped)
Chopper position Video Camera Application (if
equipped)
TouchSet (Automatic Combine Adjustment)
Harvest Monitor AutoTrac Ready Wiring Harness and
Steering Components with Harvest Monitor System
LESS
GreenStar Display JDLink capable
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and Unloading
Auger Engage Controls
Quick-Stop Header/Unloading Auger
Disengage Switch
Draper Variable Belt Speed In-Cab Control
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine RPM
Fuel level and temperature gauge
Deck plate and Dial-A-Speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active Header float system
Header Height Sensing System
LIGHTING:
Standard lighting package
Overhead work lights (four)
High beam driving lights (two)
Low beam driving lights (two)
Transport and Field Lamps (six)
Grain Tank and Unloading Auger Lamps (two)
Warning and Tail Lamps with Integral Turn Signals
(four)
Rotating beacon lights (three)
SideFinder Lights (two)
Cleaning Shoe Lights
Exit Lighting Rear Residue Discharge Lights (two)
Stubble Lights (two)
Deceleration Warning Light
FEEDERHOUSE:
Heavy-Duty Feederhouse
Lateral Tilt Feederhouse with Reverser and
heavy-duty variable speed drive system - 70 mm
(2.75 in.) lift cylinders
17 Degree Fore/Aft Adjustable front tilt frame
Heavy-Duty Reverser with Push Button
Electro-Hydraulic Shift Engagement
Single-Point Electric Hydraulic Hookup and
Latching System
2-Speed Feeder Chain
Stone Trap with Manual Dump
THRESHING AND SEPARATING:
TriStream Rotor Threshing Technology
762 mm Diameter (30 in.) Feeding and threshing
section
838 mm Diameter (33 in.) Separating Section
Total Rotor Length of 3168 mm (124.7 in.)
15 Grain Threshing Elements
Standard Feed Accelerator 10-Wing 420 mm (17 in.)
Diameter with 30 serrated wear strips
Two speed drive: 440/800 rpm
Cast Separator Grates with 19 open rows 1.54 sq m
total area 20
Separator Grate Blanks
Separator Drive
210-1000 rpm Dual-Range Posi-Torq
Discharge Beater and Grate
5-wing discharge beater with 10 wear strips
Cast Finger
Discharge Beater Grate 0.36 sq m total area
Discharge Beater Grate 0.36 sq m total area
Radial Pin Clutch
Three Concave Sections 1.1 sq m total area Round
Bar Concave
CLEANING:
2-Stage S-Series Cleaning System has:
12 Blades 500 mm Diameter (20 in.)
Dual Discharge Cleaning Fan
Deep Tooth Remote Adjustable Chaffer and Sieve
(Corn)
General Purpose Remote Adjustable Chaffer and
Sieve (small grain)
Separator Air Discharge Chute Agitators
GRAIN HANDLING:
250 bu (8,900L) Grain Tank
2.2 (77L) bu per sec (average)
Unloading System with 21.5 ft Unloading Auger
Manual Folding Grain Tank Loading Auger/Extensions
RESIDUE MANAGEMENT:
Wing Blade Wide-Spread, Fine Cut, 2-Speed
Chopper with Integrated Chaff Spreader and
single-point adjustable knife bank
ENGINE:
John Deere 6 Cylinder 6090H (9.0L)
Rated Speed at 2200 rpm
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
Rated Power "ECE R120"(kw/hp) 220/295
Power [email protected] Speed(kw/hp) 25/34
Rate [email protected](kw/hp) 236/316
Peak [email protected](kw/hp) 251/336
PowerTech Plus Diesel Engine Technology with
turbocharger and air-air aftercooler
Electronically Controlled Fuel Injection and fuel
shutoff
20 amp Alternator
950 L (250 gal.) Fuel Tank
Rotary Screen Air Intake with Vacuum Pickup
Automatically Tensioned Poly-V Accessory Drive
Belts
Standard Capacity Engine Pre-Cleaner and air
cleaner filter system
High Capacity Wide Spaced Tube Radiator
Air Scoop Cooling Technology
WHEELS AND DRIVES:
Drive Wheels and Tires
Steering Wheels and Tires
Speed Hydrostatic Ground Drive System
3-speed Transmission(High Torque) Electric Shift &
Brake
Heavy-Duty Final Drive
Adjustable Rear Axle with Heavy-Duty Spindles
HYDRAULICS:
Open Center Hydraulic System
Proportional Header Height, Reel and spreader
speed control
High Capacity (15 gpm) System and Single Piece
Integral Valve
Assembly
Header Suspension System
CODE
Active Float Mode and .7 Liter Accumulator
Reel Fore/Aft Hydraulics
92kW Heavy-Duty Variable Speed Drive System 70 mm (2.75 in.) Lift Cylinders
SERVICEABILITY:
Full Composite Flip-Open Side Shields
Central Lube Charts
Easy Access Lube Banks
Hydraulic Diagnostic Receptacles
Steel Tool Box with Tray
Battery Storage Container to Ground Level Extend Battery Posts and Cut-Off Switch
MISCELLANEOUS:
One 10-lb Type ABC Fire Extinguisher (front
mounted)
One 2.5 gal. Water Fire Extinguisher. Shipped
empty, requires filling at pre-delivery. (rear
mounted)
Independent Hydraulic Brakes Park Brake
Back Up Alarm
Composite Styling with Air Scoop
Advanced Air Intake
CAN-BUS Electronic On-Board Communication
System with Solid State Power Distribution Centers
LESS HEADER EQUIPMENT
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
08REH
S650 Combine - HX (Model Year 2017)
373,849.00
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
DESTINATION
If additional languages for Operator's Manuals are required, order online from
http://techpubs.deere.com/.
North America
0202
USA
1,309.00
Include Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined
in the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0184
Canada
1,309.00
Includes Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
OPERATOR'S MANUAL
0409
English
In Base Price
0413
French
Same Price
0437
Spanish
Same Price
0430
Portuguese
Same Price
0426
Chinese (sourced from NA)
Same Price
0504
General Purpose Regular Wear Package
VALUE PACKAGES
In Base Price
Includes: Separator Grate Covers. Requires: 4880 TriStream Rotor Regular Wear, 4832
Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0505
General Purpose Extended Wear Package
In Configuration
Includes: Separator Grate Covers. Requires: 4883 TriStream Rotor Configuration Extended
Wear Densepack,4832 Dyna-Flo PlusCleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0506
Coarse Grain Package
In Configuration
Requires: 4880 TriStream Rotor Regular Wear, 4834 Dyna-Flo PlusCleaning Shoe Deep
Tooth Adjustable Chaffer and Bottom Sieve with TouchSet. Includes additional components to
optimize grain quality in high moisture corn.
0598
Custom Configuration
In Configuration
7015
Final Tier 4 Certified Engine
1101
Deluxe Cab
ENGINE EMISSION LEVEL SELECTION
In Base Price
OPERATOR'S STATION
-1,416.00
Includes Standard Storage Package, Single Tilt Steering Column, Manual Adjust Mirror.
1121
Premium Cab
In Base Price
Includes Premium Storage Package, Actively Cooled Refrigeration Unit, Dual Tilt Steering
Column with Foot Rests, Electric Adjust Heated mirrors, Enhanced Cab Styling.
RADIO
1411
Radio Ready
-686.00
Radio ready with two pre-wired speakers and antenna. Only available with Deluxe Cab 1101.
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
RADIO ...Continued...
in right hand storage console, two speakers and external antenna. Only available with
Premium Cab 1121.
1413
Premium Radio Package with XM Radio
352.00
For U.S. and Canada Markets only. AM/FM Stereo, Weatherband, Compact Disc Player,
with MP3 file support, Remote Controls, USB port in right hand storage console, Auxiliary
Input Jack located in right hand storage console, Bluetooth capable including microphone,
Integrated Bluetooth Phone Book connection through CommandCenter, Audio-streaming with
compatible Bluetooth devices, XM Satellite capable including Satellite Antenna (Subscription
Required), Two Speakers, Subwoofer, and External Antenna. Volume, Speed Compensation,
bass, and treble radio functions can be viewed and configured on the CommandCenter
Display. Only available with Premium Cab 1121.
SEAT
1220
Basic Air Suspension Seat
-980.00
Cloth operator and instructor seats . Only available with Deluxe Cab 1101.
1221
Enhanced Air Suspension Seat
In Base Price
Cloth operator and instructor seats. Only available with Premium Cab 1121.
1222
Leather Seat Package
2,100.00
Includes all features of the enhanced air suspension seat. In addition, includes leather covered
operator and instructor seat, heated and ventilated operator seat and leather wrapped steering
wheel.
Only available with Premium Cab 1121.
LIGHTING
1360
Standard Lighting
In Base Price
Includes eight cab roof mounted halogen lamps: Four overhead work lights, two high beam
driving lights, and two low beam driving lights.
1370
Standard Lighting and Header Extremity Lights
152.00
Includes standard lights plus two halogen lamps mounted on the lower cab fascia.
1375
LED Lighting Package
3,410.00
Eight cab roof mounted lights: Four overhead LED work lights, two halogen high beam
driving lights, and two halogen low beam driving lights. Only available in Australia and New
Zealand.
1379
Premium LED Lighting Package & Header Extremity Lights
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities. CommandCenter are capable
of running AutoTrac and AutoTrac RowSense only (with appropriate activations purchased
and StarFire Receiver installed). GS3 2630 Displays are capable of all AMS functionality.
Includes Access Manager user lockout software, video capability and armrest bracket. One
video camera input pre-wired in the cab. Connector located on the outside rear of the cab. See
Parts for available cameras.
The GreenStar 3 2630 Display is required for advanced AMS
applications.
When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
27 February 2017 US & Canada
3-COMBINE- 4
3,562.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DISPLAY ...Continued...
additional GreenStar display.
1821
GS3 CommandCenter 7 in. (17.8 cm) Color Display
-1,260.00
Only available with Deluxe Cab Code 1101.
1823
Touchscreen GS3 CommandCenter 7 in. (17.8 cm) Color Display
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
4,635.00
AG MANAGEMENT SOLUTIONS
Accuracy is dependent on the receiver signal level
1803
AutoTrac Ready with Harvest Monitor
For Australia/NewZealand/China: AutoTrac Ready.
moisture and mass flow sensors).
180A
In Base Price
Harvest Monitor Complete (Includes
AutoTrac Complete with Harvest Monitor (SF3) [StarFire 6000 Receiver]
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription [StarFire 6000
Receiver]
12,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and 1 Year
SF3 Subscription
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription [StarFire 6000
Receiver]
14,895.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and RTK
Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
180D
AutoTrac Complete with Harvest Monitor (SF1) [StarFire 6000 Receiver]
7,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation.
Harvest Monitor Complete (Includes moisture and mass flow sensors).
180E
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF3) [StarFire 6000
Receiver]
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
AutoTrac RowSense requires a properly equipped head.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription and AutoTrac
27 February 2017 US & Canada
3-COMBINE- 5
15,445.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
RowSense [StarFire 6000 Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, 1 Year SF3
Subscription and AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Subscription. Harvest Monitor Complete (includes
moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
AutoTrac RowSense requires a properly equipped head.
180H
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF1) [StarFire 6000
Receiver]
10,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
A subscription is required for SF3 accuracy. AutoTrac RowSense requires a properly equipped
head.
CONNECTIVITY
Machine connectivity functions require cellular coverage. Usage of the JDLink System
requires customer's acceptance of the terms of the John Deere Telematics Subscription
Agreement, which describes John Deere's access and use of the data collected by the system.
JDLink customer account must be created to access JDLink Connect data.
Options with
JDLink Connect include: -1 Ethernet harness connecting the MTG to the primary
display/integrated processor, -1 Ethernet harness routed from the MTG to the optional
display port, -Antenna wiring harness for the Machine Communication Radio (MCR), and
the JDLink hardware: integrated cab wiring harness, antenna, Modular Telematics Gateway
(MTG) with Service ADVISOR Remote capability, and JDLink Ultimate Activation.
Subscription length of contract varies; Annual subscription renewal required after term of
service for continued functionality. Option availability limited by specific geographical
regions. Please refer to region specific price pages for appropriate ordering codes.
Use
of this service, and all rights and obligations of John Deere and the Customer (as identified in
the applicable agreement), are governed by the terms and conditions outlined in the
applicable Services and Software agreements available at www.JohnDeere.com/Agreements.
If these terms and conditions are not agreeable do not proceed and do not use the service.
188U
JDLink Hardware only - Subscription Not Included
In Base Price
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
27 February 2017 US & Canada
3-COMBINE- 6
No Charge
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
189A
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
188S
JDLink Connect 5 Year subscription
1,600.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States, Canada, and Australia through
dealers that meet New Model Qualification requirements.
189B
JDLink Connect 5 Year subscription and Machine Communication Radio
5,299.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
MOBILE APPLICATIONS
1950
Less Harvest Mobile
-500.00
Not available in United States, Canada, Australia, and New Zealand.
27 February 2017 US & Canada
3-COMBINE- 7
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MOBILE APPLICATIONS ...Continued...
1951
Harvest Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
separately from StellarSupport/JD Marketplace. Only available in United States, Canada,
Australia, and New Zealand.
1953
Wireless Data Server (WDS) with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality. Only available in United States, Canada, Australia, and New Zealand.
MACHINE AUTOMATION
1959
In Base Features: Interactive Combine Adjustment, Touch Set, VisionTrak, Harvest Smart,
and Engine Speed Management
In Base Price
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
1961
In Base Features PLUS Active Terrain Adjustment
3,020.00
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
FEEDERHOUSE TILT SELECTION
Level Land Feederhouse - Variable Speed with Reverser
3025
92kW Heavy Duty Variable Speed Drive System - 2.75 In. (70 mm) Lift Cylinders
-6,854.00
For use with Non-StalkMaster Corn Heads 8-rows and less. 6-row StalkMaster Corn heads.
Rigid Auger 30 Ft. and less. Rigid Draper Platforms 30 Ft. and less. Belt Pickup
Platforms.
Lateral Tilt Feederhouse - Variable Speed with Reverser
3052
92 kW Heavy-duty Variable Speed Drive System - 2.75 In. (70 mm) Lift Cylinders
In Base Price
For use with Non-StalkMaster Corn Heads 8-rows and less. StalkMaster Corn Heads 6-rows.
Rigid and Flex Auger Platforms 30 ft and less. Rigid Draper Platforms 30 ft and less. Belt
Pickup Platforms.
ROTOR TYPE
Wear type will include separator and concaves.
4880
TriStream Rotor Configuration Regular Wear
In Base Price
Recommended for Corn, Soybeans, and General Purpose Grains.
4883
TriStream Rotor Configuration Extended Wear (Densepack Ready)
1,954.00
Recommended for Corn, Soybeans, and General Purpose Grains.
CHAFFER AND SIEVE
4832
Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with
TouchSet (Electric Shoe Adjust)
In Base Price
Includes 9486: Separator Grate Covers (set of 20)
4834
Dyna-Flo Plus Cleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with
TouchSet (Electric Shoe Adjust)
Not recommended for use in food corn, popcorn or small grains. Includes additional
27 February 2017 US & Canada
3-COMBINE- 8
Same Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
components to optimize grain quality in high moisture corn.
CONCAVES AND THRESHING
Wear type of factory installed concaves is determined by wear type of rotor selection. For
specific recommended crop applications for each of the three type Concaves offered, refer to
Agricultural Sales Manual.
4340
Round Bar Concave
In Base Price
4300
Small Wire Concave
448.00
4302
Large Wire Concave
323.00
GRAIN HANDLING WEAR PACKAGE
5232
Regular Wear Grain Handling System
5234
Extended Wear Grain Handling System
In Base Price
4,206.00
Includes: Extended Wear, Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank
Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy Duty Grain Tank
Cross Auger, and Vertical Unloading Auger.
GRAIN TANK EXTENSIONS AND COVERS
5371
Manual Grain Tank Extensions, LESS Covers
5423
21.5 Ft. (6.6M) 1-Piece Unloading Auger
In Base Price
UNLOADING AUGER
In Base Price
Not available for Export.
RUST PROTECTION
5600
Rust Protection for Transit
298.00
Required for protection of combine from road salt during transportation from factory during
winter months and for Export. Required for Export.
5601
LESS Rust Protection for Transit
In Base Price
Not available for Export.
RESIDUE DISPOSAL
Deluxe Residue
Includes: Fine Cut Chopper - 2-Speed Chopper drive with Neutral, Integrated Chaff Spreader.
5752
Deluxe Residue - Manual Adjust Vane Tailboard
In Base Price
Recommended for Platforms 30 ft and less.
Straw Spreaders
5722
Twin Disc Straw Spreader with Integrated Chaff Spreader and Variable Speed Control
27 February 2017 US & Canada
3-COMBINE- 9
-6,557.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TRANSMISSION
2010
3-Speed Transmission Mechanical Shift and Mechanical Brake
-738.00
Not available with Premium Cabs.
2012
3-Speed Transmission Electric Shift and Electric Brake
In Base Price
Requires Premium Cab (code 1122).
DRIVE WHEELS, TIRES, AND TRACKS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6714
800/65R32 R1W 172A8 (Firestone)
In Base Price
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 606C, 606C StalkMaster, and 608C.
Available with steering tire options 6638.
6716
800/70R38 R1W 173A8 (Firestone)
3,172.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 606C, 606C StalkMaster.
Available with steering tire options 6638.
6788
LSW 800/55R46 R1W 190D (Goodyear)
6,084.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 606C, 606C StalkMaster.
Available with steering tire options 6638.
6706
LESS Drive Wheels and Tires
-3,684.00
Includes 1047 mm extension, ladder pivot module, and ISO 1352 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6707
LESS Drive Wheels and Tires
-5,546.00
Includes 1047 mm extension, ladder pivot module, and ISO 1455 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
STEERING WHEELS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6638
600/70R28 R1W (Firestone or Goodyear)
Goodyear is a 600/70R28 R1W 161A8 and Firestone is a 600/70R28 R1W 164A8.
27 February 2017 US & Canada
3-COMBINE- 10
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
STEERING WHEELS ...Continued...
6602
LESS Steering Wheels and Tires
-4,407.00
Not available for Export. For use with all Steering Tires EXCEPT 28L-26 in.
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
2220
2-Wheel Drive
In Base Price
2240
Powered Rear Axle, 2-Speed 4-Wheel Drive
8700
Engine Coolant Heater - 110 Volt (Not available for Export)
8701
Engine Coolant Heater - 220 Volt (Export Only)
106.00
8709
Fuel Pre-Filter/Water Separator
589.00
23,824.00
ENGINE
68.00
In place of Base Equipment Filter/Water Separator.
Recommended where fuel quality is a concern.
8649
Factory Installed Air Compressor
3,065.00
Includes two hoses and two air wands that can be stored on the machine. Includes two
connection points on the combine: one located at ground level above the left rear tire and one
located on the engine deck. Not available in China.
OPERATOR'S STATION
8141
Advanced Hydrohandle
158.00
Included with 3055, 3061, 3062, 3064 and 3063 (Hydraulic Feederhouse Platform Tilt (Fore
Aft)). Also required with 18BJ and 18CJ (JDLink Connect/Machine Communication Radio).
Enables 600D Header Platform Tilt Operation, integrated in the hydrohandle functions.
LIGHTING
8139
Service Light Package
664.00
Includes light on engine deck, light for access to engine deck as well as 3 lights on side panel.
Only available with Deluxe Cab code 1101. Always included with Premium Cab.
FEEDERHOUSE TYPE
8315
Feed Accelerator Slow Speed Drive
475.00
320-770 RPM. Recommended only for use in edible beans, food corn, or popcorn when
optimum grain quality is desired in these crops. Not recommended for Rice. Not available with
4885 or 4886. Not available with code 9315.
FAST (FEED ACCELERATOR AND STONE TRAP)
9315
Feed Accelerator Slow Speed Drive
320-770 RPM. Recommended for use in edible beans, food corn, and popcorn. Certain
conditions may see a straw quality improvement with slower accelerator speeds, but material
handling may be sacrificed when in tougher conditions. Not recommended for use in
Rice. Available on both the TriStream and Variable Stream Rotor. For Zweibrucken-built
machines, only available for Australia and New Zealand. Not available with Feed Accelerator
Slow Speed Drive (code 8315).
27 February 2017 US & Canada
3-COMBINE- 11
1,752.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FAST (FEED ACCELERATOR AND STONE TRAP) ...Continued...
9317
Feed Accelerator Smooth Wear Strips (Set of 30)
348.00
Recommended for improved grain quality in crops such as food corn and seed crops.
The smooth wear strips on the feed accelerator are only compatible with the TriStream rotor
FAST system.
FEEDERHOUSE TYPE
9300
Feederhouse Drive Oil Cooler
459.00
Recommended for use with chopping Corn Heads. For combines (PIN 700801 and Up). Comes
in base machine when a Multi-Speed or Heavy Duty High Torque Variable Speed Drive
Feederhouse are ordered.
9311
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900 Series Platforms with Single Point Latching System.
Please refer to Ag Sales Manual for other compatibility information.
9312
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
9314
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
CHAFFER AND SIEVE
8221
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and related parts. Reference DTAC Solution
61907 for information needed for proper wheel and tire equipment in a SideHill application.
Not for export.
8481
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
CONCAVES AND THRESHING
9433
Sectionalized Concave Cover Plates for Large Wire and Small Wire Concaves only
1,132.00
For additional threshing in hard to thresh crops.
9437
Additional Threshing Concave Insert Bars for Round
Bar Concaves (set of two)
One set required per concave section. Use if harvesting small grains with Round Bar
Concaves.
27 February 2017 US & Canada
3-COMBINE- 12
869.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
9425
Extended Wear (Heat-Treated) Round Bar Concaves (set of three)
3,472.00
Best for corn and soybeans.
Not recommended for rice, canola, grass seed.
Use in high yielding or abrasive conditions.
9426
Small Wire Concaves (set of three)
3,703.00
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, rice, sunflowers.
9427
Large Wire Concaves (set of three)
3,564.00
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
9435
Sectionalized Concave Cover Plates (set of three) Round Bar Concaves only
223.00
This cover assembly is used for additional threshing in hard to thresh crops and to even out
the distribution of crop to the cleaning shoe.
9428
Extended Wear Small Wire Concaves (set of three)
5,288.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, sunflowers.
9429
Extended Wear Large Wire Concaves (set of three)
4,927.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
SEPARATION
9486
Separator Grate Covers (set of 20)
1,174.00
Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In base
equipment for Small Grain combines. Includes five sets of four covers (20 total).
CHAFFER AND SIEVE
9482
SideHill Performance Package
829.00
Recommended for sidehill conditions to reduce grain loss. Includes full-length tall chaffer
dividers, grain return pan partitions and grain agitator paddles.
9497
Adjustable Front Chaffer Louvers (Set of 4)
765.00
Recommended for crops with dense green stalks.
GRAIN HANDLING
8525
Clean Grain Auger and Fan Bottom Protection Shielding
295.00
9510
Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough
337.00
9522
Additional "Full" Grain Tank Sensor
208.00
GRAIN HANDLING
For sidehill applications. Already in base equipment on HillMaster machines.
TIRE BRAND PREFERENCE
Tire brand preference choice is for both front and rear tires.
Rear tire brand is determined
27 February 2017 US & Canada
3-COMBINE- 13
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TIRE BRAND PREFERENCE ...Continued...
by front drive tire preference choice.
9660
No Brand Preference
No Charge
Required if only one brand of drive tire is listed. Not available in China.
9661
Firestone Brand Preferred
800.00
This Code is not required if Firestone is the only brand listed for drive tire. Use Code 9660.
9662
Goodyear Brand Preferred
800.00
This Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9660.
Not available in China.
DRIVE WHEELS, TIRES, AND TRACKS
All spacers, except Code 9669, include required Ladder Extension. Please refer to the S-Series
tire spacing chart on Ag Sales Manual.
9668
2 In. (50mm) Wheel Spacer
406.00
Not available with Codes 9669, 9220, 9221, 9222, 9223, and 9224.
9669
4 In. (96 mm) Wheel Spacer (no Ladder Extension)
749.00
Not available with Codes 9668, 9220, 9221, 9222, 9223, and 9224.
9220
4 In. (105 mm) Axle Spacer
2,419.00
For increased mud clearance. Not available with dual tire codes 6734, 6746, 6751, 6756.
9221
6.5 In. (165mm) Axle Spacer
3,699.00
Not available with dual tire codes 6734, 6746,6751, 6756. May only choose one of: 9220,
9221, 9222, or 9224.
9222
12 In. (300 mm) Axle Spacer
3,788.00
Not available with dual tire codes 6734, 6746,6751, 6756.
9223
16 In. (400 mm) Axle Spacer
3,852.00
9224
18 In. (454 mm) Axle Spacer
4,133.00
Not available with dual tire codes 6734, 6746,6751, 6756.
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BXE10786
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S650, S660, and S670 combines not equipped with ProDrive.
BXE10716
4WD Conversion Bundle - S650, S660, S670
For S650, S660, S660 ProDrive, S670 and S670 ProDrive: Model Year 2014-Model Year 2015
machines. Due to the larger wheel bolt pattern diameter, new rims (tires optional per rim size)
are required with kits BXE10712, BXE10713, and BXE10716. Please note: the wheel bolts
themselves are also larger; 2WD wheel bolts are M16 and 4WD wheels bolts are M22.
27 February 2017 US & Canada
3-COMBINE- 14
32,694.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Cab and Controls:
BXE10669
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900D and 900 Series Platfroms with Single Point
Latching System.
Please refer to Ag Sales Manual for other compatibility information.
BXE10670
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
BXE10697
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
BL15013
Smoker Option
60.45
For S550, S650, S660, S670, S680, S690 Combines. Replaces accessory power connector with
an ashtray and lighter.
KXE10433
Three Camera Bundle
1,403.77
Includes three Motec cameras (AXE41697) to be used in conjunction with factory installed
Camera Ready bundle code 8145. Cameras can be mounted to show views from the rear of the
machine, from the unloading auger, and the grain tank area of the combine. For use with
Model Year 2017 and newer machines.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
Cleaning:
AXE47285
10 mm Fixed Round Hole Sieve
2,202.18
S-series cleaning shoe: S660-S690. Available on MY16 and newer (PIN 785000 -).
AXE47286
3 mm Fixed Round Hole Sieve
S-series cleaning shoe: S650-S690. Available on MY16 and newer (PIN 785000 -).
27 February 2017 US & Canada
3-COMBINE- 15
2,097.31
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10729
Active Terrain Adjustment Conversion Bundle
3,654.20
Available on MY16 machines and newer (PIN 785000 -) ordered without the factory installed
Active Terrain Adjustment option.
BXE10692
Adjustable Front Chaffer Louvers
946.84
Recommended for crops with dense green stalks. Available for S650, S660, S670, S680, and
S690 MY16 and newer (PIN 785000 -).
BXE10475
Class 6/7 Side Hill Bundle
1,060.94
S650, S660, and S670. Also needed on S680 and S690 combines that are not equipped with an
extended front chaffer. Available on MY16 and newer (PIN 785000 -).
AXE47216
General Purpose Chaffer
1,569.90
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Sieve for MY16 and newer (PIN 785000 -).
AXE47218
General Purpose Sieve
1,356.84
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Chaffer for MY16 and newer (PIN 785000 -).
Engine:
SWDEF110VKIT 110V Pump Kit
858.57
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF12VKIT
12V Pump Kit
852.86
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF025
2.5 gal jug of John Deere Diesel Exhaust Fluid
0.00
11.75 x 9.5 x 7.6"; 25lbs. Full.
SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lid
1,680.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 36"W x 18"D x 22"H.
SWDEF275
275gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 45.75"; 2750lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF330
330gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 53.15"; 3141lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF055
55gal drum of John Deere Diesel Exhaust Fluid
0.00
Does not include drop tube/valve; 23.5 x 35"; 550lbs. Full.
SWDEFPDU60T 60gal Portable Dispensing Unit with lockable, hinged lid
1,864.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 45"W x 24"D x 30"H.
BXE10698
Air Compressor Conversion Kit
For S650, S660, S670 Combines equipped with Final Tier 4 Engines.
27 February 2017 US & Canada
3-COMBINE- 16
3,708.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10699
Air Compressor Conversion Kit
3,708.10
For S650, S660, S670 Combines equipped with Tier 2 Engines.
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
FAST (Feed Accelerator and Stone Trap):
BH84027
Contoured Serrated Feed Accelerator Wings
1,123.10
Provides fast yet gentler handling than the standard serrated wear strips. Recommended when
harvesting viney crops such as edible beans. Not for use in Rice. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84496
Expanded Stone Trap Door - Wide Body
1,573.00
Two-piece feed floor for improved rock protection. May reduce capacity in tough green
stemmed crops. (9660, 9760, 9860 PIN 720101 and Above.) (9670, 9770, 9870, S650, S660,
S670, S680, S690).
BXE10741
Feed Accelerator Slow Speed Drive
1,952.99
Available for S650, S660, S670, S680 and S690 MY16 and newer (PIN 785000-). 320-770
RPM. Recommended for use in edible beans, food corn or popcorn when optimum grain
quality is desired in these crops. Not recommended for use in Rice. Not recommended with the
Variable Stream rotor.
BH81489
Feed Accelerator Smooth Wear Strips (Set of 30)
372.90
For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops such
as popcorn, food corn, etc. Not for use in Rice. Conversion to standard corn/grain FAST
required if machine equipped with tough crop or tine fast (9660, 9760, 9860, 9670, 9770,
9870, S650,S660, S670, S680, S690).
Grain Handling:
BXE10270
Additional "Full" Grain Tank Sensor
228.80
For S550, S650, S660, S670, S680, S690 Combines.
BXE10094
BH81519
Door, Regular Duty, Perforated - S660, S670, S680
256.30
Perforated Clean Grain Elevator Boot, Door-S550, S660, S670
209.00
Used in conjunction with BXE10094 (S660/S670) or BXE10095 (S550).
BH84034
Slow Speed Clean Grain Elevator Drive (Machines without Active Tailings: S550, S650,
S660, S670)
575.30
Only available for MY15 and older machines.
H86760
Steel Paddle Tailing Elevator for all 50 Series, 60 Series and 70 Series Combines, and
S550-S670 (Parts)
23.36
Residue Disposal:
BXE10369
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10367
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10176
Standard Vane Manual Tailboard
27 February 2017 US & Canada
3-COMBINE- 17
3,774.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84523
Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread
with Integrated Chaff Spreader
1,942.60
For 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS and
S650, S660, S670, S680, S690. For spread width up to 40 Ft.
Separating:
BXE10645
Separator Grate Covers (Set of 4)
133.10
Covers included in small grain combines and custom cutter corn machines. Used to reduce
chaff load and/or alter distribution of material to cleaning shoe. Covers should not be installed
during corn harvest. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
Spacers:
BH92265
4 In. (105 mm) Axle Spacer
2,171.40
For S550, S650, S660, and S670.
For 30 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. 800 mm wide tires
require 330 mm Ladder Extension. 900 mm wide tires require 1047 mm Ladder Extension. Not
recommended with the 76X50-32.
BH81747
Parts Assembly - Box of Final Drive Axle Extensions
150.70
For S550, S660, S670, S680, S690 Combines. Includes all attaching hardware for axle
spacers.
Threshing:
BH84308
Concave Insert Bars for Round Bar Concaves (Set of 2)
955.90
Provides additional threshing in round bar concaves. One set required per concave section.
Use if harvesting small grains with round bar concaves. (9660, 9760, 9860, 9670, 9770, 9870,
S650, S660, S670, S680, S690).
BH84581
Discharge Flights for TriStream Rotors
294.80
For use with TriStream Rotors ONLY (option codes: 4880/4881/4882/4883/4884). Flights for
rear or rotor to aid in material conveyance to discharge beater. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84286
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For 9660 STS, 9760 STS, 9860 STS and MY14 and earlier S650, S660. S670, S680 and S690
combines.
BXE10391
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For MY15 and later S650, S660. S670, S680 and S690 combines.
BH84226
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (9660,
9760, 9860, 9670, 9770, 9870 and MY14 or earlier S660, S650, S670, S680, S690 combines).
BXE10387
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (For MY15
and later S660, S650, S670, S680, S690).
BH84285
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (9660, 9760, 9860, 9670,
9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10389
Extended Wear Small Wire Concaves (Set of 3)
Recommended for high yielding crops or abrasive crop conditions. (For MY15 and later S650,
S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 18
2,642.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84227
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (9660, 9760, 9860, 9670, 9770, 9870 and
MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10390
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (For MY15 and later S650, S660, S670, S680,
S690 combines).
BH84534
Sectionalized Flat Bar Concave Cover Plates (Set of 3)
577.50
For use in Large Wire and Small Wire Concaves Only. Set of 3 covers with 4 pieces to make
one complete cover. For additional threshing in hard to thresh crops. Can also be used to
change crop distribution to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660,
S670, S680, S690).
BH84535
Sectionalized Round Bar Concave Cover Plates (Set of 3)
108.90
For use with round bar concaves only. Covers used to even distribution of material to cleaning
shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
BH84229
Small Wire Concaves (Set of 3) - Wide Body
2,390.30
Not recommended for corn. Recommended for small grain and very brittle straw. (9660, 9760,
9860, 9670, 9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10388
Small Wire Concaves (Set of 3) - Wide Body
Not recommended for corn. Recommended for small grain and very brittle straw. (For MY15
and later S650, S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 19
2,390.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S650 Combine - HX (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Equipment for Base Machine
PREMIUM OPERATOR'S CAB:
Pressurized Cab with HVAC ClimaTrak
Premium Storage Package
Premium operators seat
Actively Cooled Refrigeration Unit
Windshield Wiper (2-Blades) with Washer Dual
Tilt-Telescoping Steering Column
Seat with Air Suspension
Training Seat
Driver and Training Seat Belts
Beacon lights
Pull-down front sunshade 3-Position Pivoting
Operator's Ladder
Two adjustable heated cab mounted mirrors
Large Cup Holders
Auxiliary Power Outlet Strip
Business Band Radio Pre-wire
Basic Radio Package AM/FM Stereo Radio and
CD-Player
Antenna and two speakers
Auxiliary input jack located on front of radio
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Electro-Hydraulic Controlled header and separator
controls
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
CommandCenter color display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold (if
equipped)
Chopper position Video Camera Application (if
equipped)
TouchSet (Automatic Combine Adjustment)
Harvest Monitor AutoTrac Ready Wiring Harness and
Steering Components with Harvest Monitor System
LESS
GreenStar Display JDLink capable
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and Unloading
Auger Engage Controls
Quick-Stop Header/Unloading Auger
Disengage Switch
Draper Variable Belt Speed In-Cab Control
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine RPM
Fuel level and temperature gauge
Deck plate and dial-a-speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active Header float system
Header Height Sensing System
LIGHTING:
Standard lighting package
Overhead work lights(four)
High beam driving lights(two)
Low beam driving lights(two)
Transport and Field Lamps (six)
Grain Tank and Unloading Auger Lamps (two)
Warning and Tail Lamps with Integral Turn Signals
(four)
Rotating beacon lights (three)
SideFinder Lights (two)
Cleaning Shoe Lights
Exit Lighting Rear Residue Discharge Lights (two)
Stubble Lights (two)
Deceleration Warning Light
Service Lights for Premium Cab
FEEDERHOUSE:
Heavy-Duty Feederhouse
Lateral Tilt Feederhouse with Reverser and
heavy-duty variable speed drive system - 70mm (2.75
in.) lift cylinders
17 Degree Fore/Aft Adjustable front tilt frame
Heavy-Duty Reverser with Push Button
Electro-Hydraulic Shift Engagement
Single-Point Electric Hydraulic Hookup and
Latching System
2-Speed Feeder Chain
Stone Trap with Manual Dump
THRESHING AND SEPARATING:
TriStream Rotor Threshing Technology
762 mm Diameter (30 in.) Feeding and threshing
section
838 mm Diameter (33 in.) Separating Section
Total Rotor Length of 3168 mm (124.7 in.)
15 Grain Threshing Elements
Standard Feed Accelerator 10-Wing 420 mm (17 in.)
Diameter with 30 serrated wear strips
Two speed drive: 440/800 rpm
(Corn/Grain) Cast Separator Grates with 19 open
rows. 1.54 sq m total area
Separator Drive
210-1000 RPM Dual-Range Posi-Torq
Discharge Beater and Grate
Five wing discharge beater with 10 wear strips
(Tri-Stream)
Cast Finger
Discharge Beater Grate 0.36 sq m total area
Radial Pin Clutch Three Concave Sections 1.1 sq m
total area
Round Bar Concave (Corn)
CLEANING:
2-Stage S-Series Cleaning System has:
12 Blades 500 mm Diameter (20 in.)
Dual Discharge Cleaning Fan
General Purpose Remote Adjustable Chaffer and
Sieve (small grain/rice)
Separator Air Discharge Chute Agitators
GRAIN HANDLING:
300 bu (10,600L) Grain Tank
3.3 (120L) bu per sec (average)
Unloading System with 22.5 ft Unloading Auger
Manual Folding Grain Tank Loading Auger/Extensions
RESIDUE MANAGEMENT:
Wing Blade Wide-Spread, Fine Cut, 2-Speed
Chopper with Integrated Chaff Spreader and
single-point adjustable knife bank
ENGINE:
John Deere 6 Cylinder 6090H (9.0L)
Rated Speed at 2200 rpm
Rated Power "ECE R120"(kw/hp) 249/333
Power [email protected] Speed(kw/hp) 25/34
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
Rate [email protected](kw/hp) 255/342
Peak [email protected](kw/hp) 272/364
PowerTech Plus Diesel Engine Technology with
turbocharger and air-air aftercooler
Electronically Controlled Fuel Injection and fuel
shutoff
200 amp Alternator
950L (250 gal. ) Fuel Tank
Rotary Screen Air Intake with Vacuum Pickup
Automatically Tensioned Poly-V Accessory Drive
Belts
Standard Capacity Engine Pre-Cleaner and air
cleaner filter system
High Capacity Wide Spaced Tube Radiator
Air Scoop Cooling Technology
WHEELS AND DRIVES:
Drive Wheels and Tires
Steering Wheels and Tires
Speed Hydrostatic Ground Drive System
3-speed Transmission(High Torque) Electric Shift &
Brake
Heavy-Duty Final Drive
Adjustable Rear Axle with Heavy-Duty Spindles
HYDRAULICS:
Open Center Hydraulic System
Proportional Header Height, Reel and spreader
speed control
High Capacity (15 gpm) System and Single Piece
Integral Valve
Assembly
Header Suspension System
Active Float Mode and .7 Liter Accumulator
Reel Fore/Aft Hydraulics
CODE
92 kW Heavy Duty Variable Speed Drive System 70 mm (2.75 in.) Lift Cylinders
SERVICEABILITY:
Full Composite Flip-Open Side Shields
Central Lube Charts
Easy Access Lube Banks
Hydraulic Diagnostic Receptacles
Steel Tool Box with Tray
Battery Storage Container to Ground Level Extend Battery Posts and Cut-Off Switch
MISCELLANEOUS:
One 10-lb Type ABC Fire Extinguisher (front
mounted) not included for Russia
One 2.5 gal. Water Fire Extinguisher. Shipped
empty, requires filling at pre-delivery. (rear
mounted) not included for Russia
Independent Hydraulic Brakes Park Brake
Back Up Alarm
Composite Styling with Air Scoop
Advanced Air Intake
CAN-BUS Electronic On-Board Communication
System with Solid State Power Distribution Centers
Temporary Surface Rust/Corrosion Protection
(Export Only)
LESS HEADER EQUIPMENT
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
00CEH
S660 Combine - HX (Model Year 2017)
398,122.00
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
DESTINATION
If additional languages for Operator's Manuals are required, order online from
http://techpubs.deere.com/.
North America
0202
USA
1,309.00
Include Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined
in the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0184
Canada
1,309.00
Includes Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
OPERATOR'S MANUAL
0409
English
In Base Price
0413
French
Same Price
0437
Spanish
Same Price
0430
Portuguese
Same Price
0426
Chinese (sourced from NA)
Same Price
0504
General Purpose Regular Wear Package
VALUE PACKAGES
In Base Price
Includes: Separator Grate Covers. Requires: 4880 TriStream Rotor Regular Wear, 4832
Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0505
General Purpose Extended Wear Package
In Configuration
Includes: Separator Grate Covers. Requires: 4883 TriStream Rotor Configuration Extended
Wear Densepack,4832 Dyna-Flo PlusCleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0506
Coarse Grain Package
In Configuration
Requires: 4880 TriStream Rotor Regular Wear, 4834 Dyna-Flo PlusCleaning Shoe Deep
Tooth Adjustable Chaffer and Bottom Sieve with TouchSet. Includes additional components to
optimize grain quality in high moisture corn.
0507
Small Grains Package
In Configuration
Includes: Separator Grate Covers. Requires: 4885 Variable Stream Rotor Configuration
Regular Wear, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0510
Rice Package
3,735.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines. Requires: 4886 Rice Extended Wear Variable Stream
Rotor Configuration, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve
with TouchSet, Extended Wear Grain Handling code 5234.
0598
Custom Configuration
In Configuration
7015
Final Tier 4 Certified Engine
1101
Deluxe Cab
ENGINE EMISSION LEVEL SELECTION
In Base Price
OPERATOR'S STATION
-1,416.00
Export Only - Includes Standard Storage Package, Single Tilt Steering Column, Manual
Adjust Mirror.
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S STATION ...Continued...
1121
Premium Cab
In Base Price
Includes Premium Storage Package, Actively Cooled Refrigeration Unit, Dual Tilt Steering
Column with Foot Rests, Electric Adjust Heated mirrors, Enhanced Cab Styling.
RADIO
1411
Radio Ready
-686.00
Radio ready with two pre-wired speakers and antenna. Only available with Deluxe Cab 1101.
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
in right hand storage console, two speakers and external antenna. Only available with
Premium Cab 1121.
1413
Premium Radio Package with XM Radio
352.00
For U.S. and Canada Markets only. AM/FM Stereo, Weatherband, Compact Disc Player,
with MP3 file support, Remote Controls, USB port in right hand storage console, Auxiliary
Input Jack located in right hand storage console, Bluetooth capable including microphone,
Integrated Bluetooth Phone Book connection through CommandCenter, Audio-streaming with
compatible Bluetooth devices, XM Satellite capable including Satellite Antenna (Subscription
Required), Two Speakers, Subwoofer, and External Antenna. Volume, Speed Compensation,
bass, and treble radio functions can be viewed and configured on the CommandCenter
Display. Only available with Premium Cab 1121.
SEAT
1220
Basic Air Suspension Seat
-980.00
Cloth operator and instructor seats . Only available with Deluxe Cab 1101.
1221
Enhanced Air Suspension Seat
In Base Price
Cloth operator and instructor seats. Only available with Premium Cab 1121.
1222
Leather Seat Package
2,100.00
Includes all features of the enhanced air suspension seat. In addition, includes leather covered
operator and instructor seat, heated and ventilated operator seat and leather wrapped steering
wheel.
Only available with Premium Cab 1121.
LIGHTING
1360
Standard Lighting
In Base Price
Includes eight cab roof mounted halogen lamps: Four overhead work lights, two high beam
driving lights, and two low beam driving lights.
1370
Standard Lighting and Header Extremity Lights
152.00
Includes standard lights plus two halogen lamps mounted on the lower cab fascia.
1375
LED Lighting Package
3,410.00
Eight cab roof mounted lights: Four overhead LED work lights, two halogen high beam
driving lights, and two halogen low beam driving lights. Only available in Australia and New
Zealand.
1379
Premium LED Lighting Package & Header Extremity Lights
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
27 February 2017 US & Canada
3-COMBINE- 4
3,562.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities. CommandCenter are capable
of running AutoTrac and AutoTrac RowSense only (with appropriate activations purchased
and StarFire Receiver installed). GS3 2630 Displays are capable of all AMS functionality.
Includes Access Manager user lockout software, video capability and armrest bracket. One
video camera input pre-wired in the cab. Connector located on the outside rear of the cab. See
Parts for available cameras.
The GreenStar 3 2630 Display is required for advanced AMS
applications.
When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
additional GreenStar display.
1823
Touchscreen GS3 CommandCenter 7 in. (17.8 cm) Color Display
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
4,635.00
AG MANAGEMENT SOLUTIONS
Accuracy is dependent on the receiver signal level
1800
LESS AutoTrac Ready Wiring Harness and GreenStar Harvest Monitor
Only Available in South Africa. Only available with Cab Code 1101.
Ready (less yield and moisture sensors).
1803
AutoTrac Ready with Harvest Monitor
For Australia/NewZealand/China: AutoTrac Ready.
moisture and mass flow sensors).
180A
-5,250.00
Harvest Monitor
In Base Price
Harvest Monitor Complete (Includes
AutoTrac Complete with Harvest Monitor (SF3) [StarFire 6000 Receiver]
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription [StarFire 6000
Receiver]
12,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and 1 Year
SF3 Subscription
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription [StarFire 6000
Receiver]
14,895.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and RTK
Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
180D
AutoTrac Complete with Harvest Monitor (SF1) [StarFire 6000 Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation.
Harvest Monitor Complete (Includes moisture and mass flow sensors).
27 February 2017 US & Canada
3-COMBINE- 5
7,395.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
180E
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF3) [StarFire 6000
Receiver]
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
AutoTrac RowSense requires a properly equipped head.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
15,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, 1 Year SF3
Subscription and AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Subscription. Harvest Monitor Complete (includes
moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
AutoTrac RowSense requires a properly equipped head.
180H
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF1) [StarFire 6000
Receiver]
10,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
A subscription is required for SF3 accuracy. AutoTrac RowSense requires a properly equipped
head.
CONNECTIVITY
Machine connectivity functions require cellular coverage. Usage of the JDLink System
requires customer's acceptance of the terms of the John Deere Telematics Subscription
Agreement, which describes John Deere's access and use of the data collected by the system.
JDLink customer account must be created to access JDLink Connect data.
Options with
JDLink Connect include: -1 Ethernet harness connecting the MTG to the primary
display/integrated processor, -1 Ethernet harness routed from the MTG to the optional
display port, -Antenna wiring harness for the Machine Communication Radio (MCR), and
the JDLink hardware: integrated cab wiring harness, antenna, Modular Telematics Gateway
(MTG) with Service ADVISOR Remote capability, and JDLink Ultimate Activation.
Subscription length of contract varies; Annual subscription renewal required after term of
service for continued functionality. Option availability limited by specific geographical
regions. Please refer to region specific price pages for appropriate ordering codes.
Use
of this service, and all rights and obligations of John Deere and the Customer (as identified in
the applicable agreement), are governed by the terms and conditions outlined in the
applicable Services and Software agreements available at www.JohnDeere.com/Agreements.
If these terms and conditions are not agreeable do not proceed and do not use the service.
188U
JDLink Hardware only - Subscription Not Included
27 February 2017 US & Canada
3-COMBINE- 6
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
189A
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
188S
JDLink Connect 5 Year subscription
1,600.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States, Canada, and Australia through
dealers that meet New Model Qualification requirements.
189B
JDLink Connect 5 Year subscription and Machine Communication Radio
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
27 February 2017 US & Canada
3-COMBINE- 7
5,299.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
MOBILE APPLICATIONS
1950
Less Harvest Mobile
-500.00
Not available in United States, Canada, Australia, and New Zealand.
1951
Harvest Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
separately from StellarSupport/JD Marketplace. Only available in United States, Canada,
Australia, and New Zealand.
1953
Wireless Data Server (WDS) with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality. Only available in United States, Canada, Australia, and New Zealand.
MACHINE AUTOMATION
1959
In Base Features: Interactive Combine Adjustment, Touch Set, VisionTrak, Harvest Smart,
and Engine Speed Management
In Base Price
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
1961
In Base Features PLUS Active Terrain Adjustment
3,020.00
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
FEEDERHOUSE TILT SELECTION
Level Land Feederhouse - Fixed Speed with Reverser
3031
110kW High Torque Fixed Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
-12,901.00
For use with Rigid Auger Platforms 30 Ft. and less.
Rigid Draper Platforms 35 Ft. and less
Belt Pickup Platforms.
Level Land Feederhouse - Variable Speed with Reverser
3025
92kW Heavy Duty Variable Speed Drive System - 2.75 In. (70 mm) Lift Cylinders
-9,466.00
For use with Non-StalkMaster Corn Heads 8-rows and less. 6-row StalkMaster Corn heads.
Rigid Auger 30 Ft. and less. Rigid Draper Platforms 30 Ft. and less. Belt Pickup
Platforms.
3027
110kW High Torque Variable Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
For use with StalkMaster Corn Heads 8-rows and less. Non-StalkMaster Corn Heads
12-rows and less. Rigid Auger Platforms 30 Ft. and less. Rigid Draper Platforms 35 Ft.
and less. Belt Pickup Platforms.
27 February 2017 US & Canada
3-COMBINE- 8
-6,854.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TILT SELECTION ...Continued...
Lateral Tilt Feederhouse - Fixed Speed with Reverser
3056
110kW Heavy Duty Tilt Cylinder, High Torque Fixed Speed Drive System - 3.15 In. (80 mm)
Lift Cylinders
-6,047.00
For use with Rigid and Flex Auger Platforms 35 Ft. and less.
Rigid and Flex Draper Platforms 40 Ft. and less.
Belt Pickup Platforms.
3055
110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders
w/ Fore Aft Tilt
-3,202.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 40 ft or less, Rigid and Flex Auger Platforms 35 ft less,
Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro handle).
Lateral Tilt Feederhouse - Variable Speed with Reverser
3052
92 kW Heavy-duty Variable Speed Drive System - 2.75 In. (70 mm) Lift Cylinders
-2,611.00
For use with Non-StalkMaster Corn Heads 8-rows and less. StalkMaster Corn Heads 6-rows.
Rigid and Flex Auger Platforms 30 ft and less. Rigid Draper Platforms 30 ft and less. Belt
Pickup Platforms.
3054
110 kW Heavy-duty Tilt Cylinder, High-torque, Variable Speed Drive System - 3.15 In. (80
mm) Lift Cylinders
In Base Price
For use with StalkMaster Corn Heads 8-rows and less. Non-StalkMaster Corn Heads
12-rows and less. Rigid and Flex Auger Platforms 35 ft and less. Rigid and Flex Draper
Platforms 40 ft and less. Belt Pickup Platforms.
3061
110kw Heavy-duty Dual Tilt Cylinders, Variable Speed Drive System - 3.15 In. (80 mm) Lift
Cylinders w/ Fore Aft Tilt
2,845.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with StalkMaster Corn Heads 8-rows or less, Non-StalkMaster Corn Heads
12-rows or less, Rigid and Flex Draper Platforms 40 ft or less, Rigid and Flex Auger
Platforms 35 ft or less, Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro
handle).
ROTOR TYPE
Wear type will include separator and concaves.
4880
TriStream Rotor Configuration Regular Wear
In Base Price
Recommended for Corn, Soybeans, and General Purpose Grains.
4883
TriStream Rotor Configuration Extended Wear (Densepack Ready)
1,954.00
Recommended for Corn, Soybeans, and General Purpose Grains.
4884
Custom Cutter's Extended Wear Separation and Concave Package
7,604.00
Includes: Extended Wear (Thick Skin) Tri- Stream Rotor, Extended Wear Threshing Elements,
Separator Tines and Rotor Top Covers. Also includes: 20 Separator Grate Covers and
Extended Wear Round Bar Concaves for field installation. Requires Code 4832 (Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet) and Code 4300
(Factory Installed Small Wire Concave).
4885
Variable Stream Rotor Configuration Regular Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
4886
1,887.00
Includes:
Variable Stream Rotor Configuration Extended Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
27 February 2017 US & Canada
3-COMBINE- 9
3,522.00
Includes:
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE
4832
Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with
TouchSet (Electric Shoe Adjust)
In Base Price
Includes 9486: Separator Grate Covers (set of 20)
4834
Dyna-Flo Plus Cleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with
TouchSet (Electric Shoe Adjust)
Same Price
Not recommended for use in food corn, popcorn or small grains. Includes additional
components to optimize grain quality in high moisture corn.
CONCAVES AND THRESHING
Wear type of factory installed concaves is determined by wear type of rotor selection. For
specific recommended crop applications for each of the three type Concaves offered, refer to
Agricultural Sales Manual.
4340
Round Bar Concave
In Base Price
4300
Small Wire Concave
448.00
4390
Extended Wear Small Grain Combination Concave
1,888.00
Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and
25-wire mid and rear Concaves). Only available in Australia and New Zealand.
4302
Large Wire Concave
323.00
5232
Regular Wear Grain Handling System
5234
Extended Wear Grain Handling System
GRAIN HANDLING WEAR PACKAGE
In Base Price
4,206.00
Includes: Extended Wear, Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank
Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy Duty Grain Tank
Cross Auger, and Vertical Unloading Auger.
GRAIN TANK EXTENSIONS AND COVERS
5371
Manual Grain Tank Extensions, LESS Covers
5373
Power Folding Grain Tank Covers
5424
22.5 Ft. (6.9M) 1-Piece Unloading Auger
In Base Price
5,273.00
UNLOADING AUGER
In Base Price
Not available for Export.
5425
22.5 Ft. (6.9M) Power Folding Unloading Auger
5,875.00
5426
22.5 Ft. (6.9M) 2-Piece Unloading Auger
1,196.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5427
22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger
515.00
Not available for export.
5428
26 Ft. (7.9M) Unloading Auger
Not available for export. Recommended for Platforms up to 40 Ft. and Corn Heads up to
16-rows 30 In.
27 February 2017 US & Canada
3-COMBINE- 10
2,394.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
UNLOADING AUGER ...Continued...
5429
26 Ft. (7.9M) Unloading Auger
3,589.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5431
26 Ft. (7.9M) Power Folding Unloading Auger
8,269.00
5432
28.5 Ft. (8.7M) Unloading Auger
4,103.00
Not available for Export.
5433
28.5 Ft. (8.7M) Unloading Auger
5,300.00
Export Only. No homologation, auger comes uninstalled and requires dealer installation.
RUST PROTECTION
5600
Rust Protection for Transit
298.00
Required for protection of combine from road salt during transportation from factory during
winter months and for Export. Required for Export.
5601
LESS Rust Protection for Transit
In Base Price
Not available for Export.
RESIDUE DISPOSAL
Deluxe Residue
Includes: Fine Cut Chopper - 2-Speed Chopper drive with Neutral, Integrated Chaff Spreader.
5752
Deluxe Residue - Manual Adjust Vane Tailboard
In Base Price
Recommended for Platforms 30 ft and less.
5756
Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind
compensation
7,008.00
Recommended for platforms 30 ft to 50 ft
Straw Spreaders
5722
Twin Disc Straw Spreader with Integrated Chaff Spreader and Variable Speed Control
-6,557.00
5724
Wide Spread Twin Disc Straw Spreader with Integrated Chaff Spreader, Barrier Hoops,
In-cab Independent Disk Speed
-4,791.00
Recommended for Platforms 30 ft to 40 ft.
TRANSMISSION
2010
3-Speed Transmission Mechanical Shift and Mechanical Brake
-738.00
Export Only. Not available with Premium Cabs.
2012
3-Speed Transmission Electric Shift and Electric Brake
In Base Price
Requires Premium Cab (code 1122).
2020
ProDrive Transmission with Harvest Smart Feedrate Control
Requires Premium Cab (code 1122). Only available in United States and Canada.
DRIVE WHEELS, TIRES, AND TRACKS
27 February 2017 US & Canada
3-COMBINE- 11
12,936.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6714
800/65R32 R1W 172A8 (Firestone)
In Base Price
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 630D, 630FD, 606C, 606C StalkMaster, 608C, and
608C StalkMaster.
Available with steering tire options 6638.
6716
800/70R38 R1W 173A8 (Firestone)
3,172.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 630D, 630FD, 606C, 606C StalkMaster, 608C, 608C
StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6664, or 6676.
6753
IF800/70R38 R1W 187A8 CFO
6,370.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 635D, 630FD, 635FD, 606C, 606C StalkMaster,
608C, 608C StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6674,6664, or 6640.
Available in Michelin (for all markets) or Firestone (not available in China).
6734
650/85R38 R1W Duals 173A8
17,784.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 618F, 622F, 625F, 630F, 635F, 625D, 635D, 630D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6640, 6664, or 6676.
Available in Firestone, Goodyear, or Michelin.
6746
520/85R42 R1 Duals 157A8 (Firestone or Goodyear)
9,298.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6638, or 6664.
6751
520/85R42 R2 Duals (Firestone or Goodyear)
12,117.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Firestone brand is 165A8 and Goodyear brand is 162A8. Available with steering tire options
6620, 6634, 6664, or 6638.
6747
IF1250/50R32 CFO R1W 201B (Firestone Only)
20,356.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6638, 6664, or 6676. This tire is allowed with
300 mm, 400 mm, 454 mm axle spacers only.
6756
580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6638, 6664, or 6676.
27 February 2017 US & Canada
3-COMBINE- 12
14,432.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
6759
IF900/60R32 CFO R1 182A8 (Firestone only)
5,986.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6664, or 6638.
6762
IF520/85R42 CFO R1W 169B Duals (Goodyear or Firestone)
18,940.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6638, 6664, or 6676.
6764
VF520/85R42 CFO R1W 177A8 Duals (Michelin)
24,850.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire option 6640.
6766
IF900/65R32 CFO R2 191A8 (Goodyear)
8,706.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Available with steering tire options 6620, 6634, 6638, or 6676.
6769
LSW1250/35R46 195D R2 (Goodyear)
29,156.00
For use with the following front end equipment only: 618R, 620R, 622R, 625R, 630R, 618F,
620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C StalkMaster,
608C, 608C StalkMaster, and 612C.
Requires 2020 ProDrive. Available with steering tire options 6634, 6676, and 6643.
6780
LSW1100/45R46 195D R1W (Goodyear)
16,120.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 606C, 606C
StalkMaster, 608C, 608C StalkMaster, and 612C.
Requires 2020 ProDrive. Available with steering tire options 6620, 6634, 6638, 6676, and
6643.
6788
LSW 800/55R46 R1W 190D (Goodyear)
6,084.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 630D, 630FD, 606C, 606C StalkMaster, 608C, 608C
StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6643, or 6676.
6700
LESS Drive Wheels and Tires
-4,184.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6702
LESS Drive Wheels and Tires
-3,994.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6703
LESS Drive Wheels and Tires
-4,164.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6704
LESS Drive Wheels and Tires
-4,074.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1455 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6705
LESS Drive Wheels and Tires
27 February 2017 US & Canada
3-COMBINE- 13
-3,974.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6706
LESS Drive Wheels and Tires
-3,684.00
Includes 1047 mm extension, ladder pivot module, and ISO 1352 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6707
LESS Drive Wheels and Tires
-5,546.00
Includes 1047 mm extension, ladder pivot module, and ISO 1455 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6708
LESS Drive Wheels and Tires
-3,684.00
Includes 1047 mm extension, ladder pivot module, and ISO 1554 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
STEERING WHEELS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6620
620/75R26 R1W 166A8 (Goodyear Only) or 23.1R26 166A8 R1 (Firestone Only)
548.00
Only available in Firestone.
6634
750/65R26 (Goodyear or Firestone)
2,378.00
Goodyear is a 750/65R26 R1W 166A8 and Firestone is 750/65R26 R1W 169A8.
6638
600/70R28 R1W (Firestone or Goodyear)
In Base Price
Goodyear is a 600/70R28 R1W 161A8 and Firestone is a 600/70R28 R1W 164A8.
6640
VF620/70R26 CFO 173A8 TL CEREXBIB (Michelin Only) - 3.49m width
2,446.00
6643
LSW IF710/60R30 CFO R1W 177D (Goodyear only)
2,784.00
6646
VF750/65R26 R1W 177B (Firestone Only)
3,746.00
6674
VF750/65R26 CFO R1W 177A8 (MICHELIN)
5,146.00
6676
VF710/65R26 R2 177D (Goodyear)
5,346.00
6600
LESS Steering Wheels and Tires
-4,387.00
Not available for Export. For use with 28L-26 In. only. Includes Axle Stops. Not available
with LSW tires 6769 and 6780.
6602
LESS Steering Wheels and Tires
-4,407.00
Not available for Export. For use with all Steering Tires EXCEPT 28L-26 in.
6664
VF620/75R26 R1W 172B (Firestone)
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
27 February 2017 US & Canada
3-COMBINE- 14
3,548.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
...Continued...
2220
2-Wheel Drive
In Base Price
2240
Powered Rear Axle, 2-Speed 4-Wheel Drive
8700
Engine Coolant Heater - 110 Volt (Not available for Export)
8701
Engine Coolant Heater - 220 Volt (Export Only)
106.00
8709
Fuel Pre-Filter/Water Separator
589.00
23,824.00
ENGINE
68.00
In place of Base Equipment Filter/Water Separator.
Recommended where fuel quality is a concern.
8649
Factory Installed Air Compressor
3,065.00
Includes two hoses and two air wands that can be stored on the machine. Includes two
connection points on the combine: one located at ground level above the left rear tire and one
located on the engine deck. Not available in China.
OPERATOR'S STATION
8141
Advanced Hydrohandle
158.00
Included with 3055, 3061, 3062, 3064 and 3063 (Hydraulic Feederhouse Platform Tilt (Fore
Aft)). Also required with 18BJ and 18CJ (JDLink Connect/Machine Communication Radio).
Enables 600D Header Platform Tilt Operation, integrated in the hydrohandle functions.
LIGHTING
8139
Service Light Package
664.00
Includes light on engine deck, light for access to engine deck as well as 3 lights on side panel.
Only available with Deluxe Cab code 1101. Always included with Premium Cab.
CAMERA OBSERVATION SYSTEM
8145
Camera Ready
338.00
Cameras are not included. Includes harnesses and brackets factory installed at the unloading
auger to enable view of auger boot location over the grain cart when unloading auger is
swung out, at grain tank covers to enable grain tank visibility and beneath the rear beacon
light to enable rear view.
Requires 2630 Display on corner post or CommandArm for use.
FEEDERHOUSE TYPE
8315
Feed Accelerator Slow Speed Drive
475.00
320-770 RPM. Recommended only for use in edible beans, food corn, or popcorn when
optimum grain quality is desired in these crops. Not recommended for Rice. Not available with
4885 or 4886. Not available with code 9315.
FAST (FEED ACCELERATOR AND STONE TRAP)
9315
Feed Accelerator Slow Speed Drive
320-770 RPM. Recommended for use in edible beans, food corn, and popcorn. Certain
conditions may see a straw quality improvement with slower accelerator speeds, but material
27 February 2017 US & Canada
3-COMBINE- 15
1,752.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FAST (FEED ACCELERATOR AND STONE TRAP) ...Continued...
handling may be sacrificed when in tougher conditions. Not recommended for use in
Rice. Available on both the TriStream and Variable Stream Rotor. For Zweibrucken-built
machines, only available for Australia and New Zealand. Not available with Feed Accelerator
Slow Speed Drive (code 8315).
9317
Feed Accelerator Smooth Wear Strips (Set of 30)
348.00
Recommended for improved grain quality in crops such as food corn and seed crops.
The smooth wear strips on the feed accelerator are only compatible with the TriStream rotor
FAST system.
FEEDERHOUSE TYPE
9300
Feederhouse Drive Oil Cooler
459.00
Recommended for use with chopping Corn Heads. For combines (PIN 700801 and Up). Comes
in base machine when a Multi-Speed or Heavy Duty High Torque Variable Speed Drive
Feederhouse are ordered.
9311
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900 Series Platforms with Single Point Latching System.
Please refer to Ag Sales Manual for other compatibility information.
9312
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
9314
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
SEPARATION
8499
Heavy Duty Separator Grates
3,735.00
Available only with Variable Stream Rotor. Includes Interruptor Bars.
Included with 0511, 0510, 0508, 0518.
CHAFFER AND SIEVE
8220
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
-1,565.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and Dual Landing Extension and related
parts.Reference DTAC Solution 61907 for information needed for proper wheel and tire
equipment in a SideHill application. Not for export.
8221
SideHill Ready Configuration for combines ordered with Single Drive Tires
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and related parts. Reference DTAC Solution
61907 for information needed for proper wheel and tire equipment in a SideHill application.
Not for export.
27 February 2017 US & Canada
3-COMBINE- 16
978.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
8480
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
-1,565.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
8481
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
CONCAVES AND THRESHING
9404
Densepack Threshing Tines for Variable Stream Rotor
826.00
Only available with Rotor Option Codes 4885 and 4886. Additional threshing tine base
weldments for installation into the densepack locations of a Variable Stream Rotor only. Can
be used to improve material handling in some tougher conditions such as rice and grass seed
harvest. May decrease machine performance if used in dry brittle crop conditions.
Wear plate kits KXE10049 (rice wear plates), KXE10048 (grain wear plates) must be ordered
separately.
Rice machines from factory already come with these tines installed.
9433
Sectionalized Concave Cover Plates for Large Wire and Small Wire Concaves only
1,132.00
For additional threshing in hard to thresh crops.
9437
Additional Threshing Concave Insert Bars for Round
Bar Concaves (set of two)
869.00
One set required per concave section. Use if harvesting small grains with Round Bar
Concaves.
9425
Extended Wear (Heat-Treated) Round Bar Concaves (set of three)
3,472.00
Best for corn and soybeans.
Not recommended for rice, canola, grass seed.
Use in high yielding or abrasive conditions.
9426
Small Wire Concaves (set of three)
3,703.00
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, rice, sunflowers.
9427
Large Wire Concaves (set of three)
3,564.00
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
9435
Sectionalized Concave Cover Plates (set of three) Round Bar Concaves only
223.00
This cover assembly is used for additional threshing in hard to thresh crops and to even out
the distribution of crop to the cleaning shoe.
9428
Extended Wear Small Wire Concaves (set of three)
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, sunflowers.
27 February 2017 US & Canada
3-COMBINE- 17
5,288.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
9429
Extended Wear Large Wire Concaves (set of three)
4,927.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
SEPARATION
9486
Separator Grate Covers (set of 20)
1,174.00
Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In base
equipment for Small Grain combines. Includes five sets of four covers (20 total).
9403
Rice Performance Enhancement Package
2,495.00
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components that when used in certain configurations (dependent on crop/conditions) may
enhance the separation performance of the combine. Includes instructions on how/when to
use bundle components. Only available with 0510 and 0511
CHAFFER AND SIEVE
9482
SideHill Performance Package
829.00
Recommended for sidehill conditions to reduce grain loss. Includes full-length tall chaffer
dividers, grain return pan partitions and grain agitator paddles.
9497
Adjustable Front Chaffer Louvers (Set of 4)
765.00
Recommended for crops with dense green stalks.
GRAIN HANDLING
8525
Clean Grain Auger and Fan Bottom Protection Shielding
295.00
9510
Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough
337.00
9522
Additional "Full" Grain Tank Sensor
208.00
GRAIN HANDLING
For sidehill applications. Already in base equipment on HillMaster machines.
TIRE BRAND PREFERENCE
Tire brand preference choice is for both front and rear tires.
by front drive tire preference choice.
9660
Rear tire brand is determined
No Brand Preference
No Charge
Required if only one brand of drive tire is listed. Not available in China.
9661
Firestone Brand Preferred
800.00
This Code is not required if Firestone is the only brand listed for drive tire. Use Code 9660.
9662
Goodyear Brand Preferred
800.00
This Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9660.
Not available in China.
9663
Michelin Brand Preferred
DRIVE WHEELS, TIRES, AND TRACKS
27 February 2017 US & Canada
3-COMBINE- 18
1,200.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
All spacers, except Code 9669, include required Ladder Extension. Please refer to the S-Series
tire spacing chart on Ag Sales Manual.
9668
2 In. (50mm) Wheel Spacer
406.00
Not available with Codes 9669, 9220, 9221, 9222, 9223, and 9224.
9669
4 In. (96 mm) Wheel Spacer (no Ladder Extension)
749.00
Not available with Codes 9668, 9220, 9221, 9222, 9223, and 9224.
9220
4 In. (105 mm) Axle Spacer
2,419.00
For increased mud clearance. Not available with dual tire codes 6734, 6746, 6751, 6756.
9221
6.5 In. (165mm) Axle Spacer
3,699.00
Not available with dual tire codes 6734, 6746,6751, 6756. May only choose one of: 9220,
9221, 9222, or 9224.
9222
12 In. (300 mm) Axle Spacer
3,788.00
Not available with dual tire codes 6734, 6746,6751, 6756.
9223
16 In. (400 mm) Axle Spacer
3,852.00
9224
18 In. (454 mm) Axle Spacer
4,133.00
Not available with dual tire codes 6734, 6746,6751, 6756.
HITCHES
8640
Semi-Automatic Rear Hitch with Wiring Harness, allows a single operator to connect trailer
to combine
1,022.00
Export Only. Rated 4500 kg.
8641
Manual Rear Hitch with Wiring Harness for Towing Header Trailer
757.00
Export Only. Rated 4500 kg.
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BXE10751
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S660 and S670 combines equipped with ProDrive.
BXE10786
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S650, S660, and S670 combines not equipped with ProDrive.
BXE10713
4WD Conversion Bundle
25,034.90
For S660, S670 and S670 ProDrive: Model Year 2012-Model Year 2013 machines. Due to the
larger wheel bolt pattern diameter, new rims (tires optional per rim size) are required with kits
BXE10712, BXE10713, and BXE10716. Please note: the wheel bolts themselves are also
larger; 2WD wheel bolts are M16 and 4WD wheels bolts are M22.
BXE10716
4WD Conversion Bundle - S650, S660, S670
For S650, S660, S660 ProDrive, S670 and S670 ProDrive: Model Year 2014-Model Year 2015
machines. Due to the larger wheel bolt pattern diameter, new rims (tires optional per rim size)
are required with kits BXE10712, BXE10713, and BXE10716. Please note: the wheel bolts
themselves are also larger; 2WD wheel bolts are M16 and 4WD wheels bolts are M22.
27 February 2017 US & Canada
3-COMBINE- 19
32,694.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Cab and Controls:
BXE10669
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900D and 900 Series Platfroms with Single Point
Latching System.
Please refer to Ag Sales Manual for other compatibility information.
BXE10670
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
BXE10697
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
BL15013
Smoker Option
60.45
For S550, S650, S660, S670, S680, S690 Combines. Replaces accessory power connector with
an ashtray and lighter.
KXE10433
Three Camera Bundle
1,403.77
Includes three Motec cameras (AXE41697) to be used in conjunction with factory installed
Camera Ready bundle code 8145. Cameras can be mounted to show views from the rear of the
machine, from the unloading auger, and the grain tank area of the combine. For use with
Model Year 2017 and newer machines.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
Cleaning:
AXE47285
10 mm Fixed Round Hole Sieve
2,202.18
S-series cleaning shoe: S660-S690. Available on MY16 and newer (PIN 785000 -).
AXE47286
3 mm Fixed Round Hole Sieve
S-series cleaning shoe: S650-S690. Available on MY16 and newer (PIN 785000 -).
27 February 2017 US & Canada
3-COMBINE- 20
2,097.31
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10729
Active Terrain Adjustment Conversion Bundle
3,654.20
Available on MY16 machines and newer (PIN 785000 -) ordered without the factory installed
Active Terrain Adjustment option.
BXE10692
Adjustable Front Chaffer Louvers
946.84
Recommended for crops with dense green stalks. Available for S650, S660, S670, S680, and
S690 MY16 and newer (PIN 785000 -).
BXE10475
Class 6/7 Side Hill Bundle
1,060.94
S650, S660, and S670. Also needed on S680 and S690 combines that are not equipped with an
extended front chaffer. Available on MY16 and newer (PIN 785000 -).
AXE47216
General Purpose Chaffer
1,569.90
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Sieve for MY16 and newer (PIN 785000 -).
AXE47218
General Purpose Sieve
1,356.84
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Chaffer for MY16 and newer (PIN 785000 -).
Engine:
SWDEF110VKIT 110V Pump Kit
858.57
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF12VKIT
12V Pump Kit
852.86
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF025
2.5 gal jug of John Deere Diesel Exhaust Fluid
0.00
11.75 x 9.5 x 7.6"; 25lbs. Full.
SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lid
1,680.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 36"W x 18"D x 22"H.
SWDEF275
275gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 45.75"; 2750lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF330
330gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 53.15"; 3141lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF055
55gal drum of John Deere Diesel Exhaust Fluid
0.00
Does not include drop tube/valve; 23.5 x 35"; 550lbs. Full.
SWDEFPDU60T 60gal Portable Dispensing Unit with lockable, hinged lid
1,864.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 45"W x 24"D x 30"H.
BXE10698
Air Compressor Conversion Kit
For S650, S660, S670 Combines equipped with Final Tier 4 Engines.
27 February 2017 US & Canada
3-COMBINE- 21
3,708.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10699
Air Compressor Conversion Kit
3,708.10
For S650, S660, S670 Combines equipped with Tier 2 Engines.
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
FAST (Feed Accelerator and Stone Trap):
BH84027
Contoured Serrated Feed Accelerator Wings
1,123.10
Provides fast yet gentler handling than the standard serrated wear strips. Recommended when
harvesting viney crops such as edible beans. Not for use in Rice. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84496
Expanded Stone Trap Door - Wide Body
1,573.00
Two-piece feed floor for improved rock protection. May reduce capacity in tough green
stemmed crops. (9660, 9760, 9860 PIN 720101 and Above.) (9670, 9770, 9870, S650, S660,
S670, S680, S690).
BXE10741
Feed Accelerator Slow Speed Drive
1,952.99
Available for S650, S660, S670, S680 and S690 MY16 and newer (PIN 785000-). 320-770
RPM. Recommended for use in edible beans, food corn or popcorn when optimum grain
quality is desired in these crops. Not recommended for use in Rice. Not recommended with the
Variable Stream rotor.
BH81489
Feed Accelerator Smooth Wear Strips (Set of 30)
372.90
For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops such
as popcorn, food corn, etc. Not for use in Rice. Conversion to standard corn/grain FAST
required if machine equipped with tough crop or tine fast (9660, 9760, 9860, 9670, 9770,
9870, S650,S660, S670, S680, S690).
BH84447
High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversion for combines
equipped with the Heavy Duty Posi-Torq Variable Speed Drive System
7,641.70
Recommended for use with chopping corn heads 8 Rows and larger, or high yielding green
stem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS, 9670
STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS, S660, S670, S680, S690 combines.
BH84582
Spike Feed Accelerator
4,699.20
For use in tough material handling rice conditions where rice is down and tangled. Not for use
with stripper headers. Not for use in corn/grain harvest. (9660, 9760, 9860, 9670, 9770, 9870,
S660, S670, S680, S690).
BH84416
Tine Feed Accelerator
4,453.90
For use in tough material handling rice conditions where slug. Note: Rice machines from
factory come with tine ffed accelerator installed. (9660, 9760, 9860, 9670, 9770, 9870, S660,
S670, S680, S690).
Grain Handling:
BXE10270
Additional "Full" Grain Tank Sensor
228.80
For S550, S650, S660, S670, S680, S690 Combines.
BXE10094
BH81519
Door, Regular Duty, Perforated - S660, S670, S680
256.30
Perforated Clean Grain Elevator Boot, Door-S550, S660, S670
209.00
Used in conjunction with BXE10094 (S660/S670) or BXE10095 (S550).
BH84034
Slow Speed Clean Grain Elevator Drive (Machines without Active Tailings: S550, S650,
S660, S670)
Only available for MY15 and older machines.
27 February 2017 US & Canada
3-COMBINE- 22
575.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
H86760
Steel Paddle Tailing Elevator for all 50 Series, 60 Series and 70 Series Combines, and
S550-S670 (Parts)
23.36
Ladder Extensions:
BXE10121
230 mm Bolt-on Single Tire Platform
512.60
For S550, S660, S670, S680, S690 Combines. Includes 230 mm bolt-on platform and rail post.
BXE10122
330 mm Bolt-on Single Tire Platform
537.90
For S550, S660, S670, S680, S690 Combines. Includes 330 mm bolt-on platform and rail post.
BXE10120
Dual Tire Extension
1,590.60
For S550, S660, S670, S680, S690 Combines. Includes: Dual extension and applicable
mounting, hardware, extension handrails, and chains. (Serial Number 764999).
BXE10124
Long Length Ladder
1,940.40
For S550, S660, S670, S680, S690 Combines. Includes: 1554 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10420
Long Length Ladder
1,940.40
(Serial Number 765000-).
BXE10123
Medium Length Ladder
1,812.80
For S550, S660, S670, S680, S690 Combines. Includes: 1455 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10421
Medium Length Ladder
1,812.80
(Serial Number 765000-).
BXE10156
Short Length Ladder
1,688.50
For S550, S660, S670, S680, S690 Combines. Includes: 1352 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10422
Short Length Ladder
1,285.90
(Serial Number 765000-).
Residue Disposal:
BXE10178
Chopper Drive Shielding
497.20
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10357
Chopper Drive Shielding
497.20
For MY15 and Newer S660, S670, S680, S690 Combines.
KXE10121
Deflector - PowerCast Tailboard
143.61
KXE10148
Distribution Kit - Standard Flex Residue
277.85
BXE10184
Fine Cut Chopper Drive Bundle
2,603.70
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10361
Fine Cut Chopper Drive Bundle
2,603.70
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10172
Fine Cut Chopper with Standard VTB Outlet
For MY14 and Older S660, S670, S680, S690 Combines.
27 February 2017 US & Canada
3-COMBINE- 23
11,180.40
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10355
Fine Cut Chopper with Standard VTB Outlet
11,180.40
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10181
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10358
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10198
Hydraulic + Electric for PowerCast
2,115.30
Open Center Hydraulics (For MY14 and older S660, S670).
BXE10365
Hydraulic + Electric for PowerCast
2,115.30
Open Center Hydraulics (For MY15 and newer S660, S670).
BXE10211
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Open Center Hydraulics (For MY14 and Older S660, S670).
BXE10193
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Open Center Hydraulics (For MY14 and Older S660, S670).
BXE10369
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10367
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10174
PowerCast Tailboard
5,625.40
BXE10179
Standard Deflectors
1,128.60
BXE10177
Standard Vane Electrical Tailboard
1,771.00
BXE10176
Standard Vane Manual Tailboard
3,774.10
BH84523
Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread
with Integrated Chaff Spreader
1,942.60
For 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS and
S650, S660, S670, S680, S690. For spread width up to 40 Ft.
Separating:
BXE10195
HD Grate-Separator Covers (Set of 20)
1,523.50
Only use with HD welded frame separator grates. Used to reduce chaff load and/or alter
distribution of material to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S660, S670,
S680, S690).
BXE10645
Separator Grate Covers (Set of 4)
Covers included in small grain combines and custom cutter corn machines. Used to reduce
chaff load and/or alter distribution of material to cleaning shoe. Covers should not be installed
during corn harvest. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
27 February 2017 US & Canada
3-COMBINE- 24
133.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Spacers:
BH92258
12 In. (300 mm) Axle Spacer
2,689.50
For S550, S660, and S670.
Requires 1047 mm Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires
require 1352 Length Ladder.
BH92260
16 In. (400 mm) Axle Spacer
2,751.10
For S550, S660, and S670.
For 36 In. and 38 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. For 30 In.
rows with 76X50-32 tire. Requires 1047 mm Ladder Extension. 76X50-32 Requires 1455
Length Ladder, all other tires require 1352 Length Ladder.
BH92262
18 In. (454 mm) Axle Spacer
3,140.50
For S550, S660, and S670.
For 40 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. Requires 1047 mm
Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires require 1352 Length
Ladder.
BH92131
2 In. (50 mm) Wheel Spacer
504.90
For S550, S660, S670, S680, S690 Combines. Requires 330 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92265
4 In. (105 mm) Axle Spacer
2,171.40
For S550, S650, S660, and S670.
For 30 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. 800 mm wide tires
require 330 mm Ladder Extension. 900 mm wide tires require 1047 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92134
4 In. (96 mm) Wheel Spacer
673.20
For S550, S660, S670, S680, S690 Combines. For 30 In. rows with 30.5 In. wide, 800 mm wide
and 900mm wide tires. Requires 330 mm Ladder Extension. Not recommended with 76X50-32.
BXE10141
50 mm Wheel Spacer Assembly - Single Wheel Only
673.20
For S550, S660, S670, S680, S690 Combines.
BH92267
6.5 In. (165 mm) Axle Spacer
2,524.50
For S550, S660, and S670.
Requires 1047 mm Ladder Extension and 1352 mm Length Ladder. Not recommended with the
76X50-32.
BH81747
Parts Assembly - Box of Final Drive Axle Extensions
150.70
For S550, S660, S670, S680, S690 Combines. Includes all attaching hardware for axle
spacers.
Threshing:
BH84308
Concave Insert Bars for Round Bar Concaves (Set of 2)
955.90
Provides additional threshing in round bar concaves. One set required per concave section.
Use if harvesting small grains with round bar concaves. (9660, 9760, 9860, 9670, 9770, 9870,
S650, S660, S670, S680, S690).
BXE10020
Densepack Threshing Tines for Variable Stream Rotor
For use with Variable Stream Rotors ONLY (option codes: 4885 and 4886). Additional
threshing tine base weldments for installation into the densepack locations of a variable stream
rotor only. Can be used to improve material handling in some tougher conditions such as rice
and grass seed harvest. Note: May decrease machine performance if used in dry brittle crop
conditions. Note: Wear plate kits (grain vs. rice) must be ordered separately through service
parts. Note: Rice machines from factory already come with these tines installed.
27 February 2017 US & Canada
3-COMBINE- 25
908.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S660 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84581
Discharge Flights for TriStream Rotors
294.80
For use with TriStream Rotors ONLY (option codes: 4880/4881/4882/4883/4884). Flights for
rear or rotor to aid in material conveyance to discharge beater. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84286
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For 9660 STS, 9760 STS, 9860 STS and MY14 and earlier S650, S660. S670, S680 and S690
combines.
BXE10391
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For MY15 and later S650, S660. S670, S680 and S690 combines.
BH84226
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (9660,
9760, 9860, 9670, 9770, 9870 and MY14 or earlier S660, S650, S670, S680, S690 combines).
BXE10387
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (For MY15
and later S660, S650, S670, S680, S690).
BH84285
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (9660, 9760, 9860, 9670,
9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10389
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (For MY15 and later S650,
S660, S670, S680, S690 combines).
BH84227
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (9660, 9760, 9860, 9670, 9770, 9870 and
MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10390
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (For MY15 and later S650, S660, S670, S680,
S690 combines).
BXE10491
Rice Performance Enhancement Package
3,348.40
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components when used in certain configurations (dependent on crop/conditions) may enhance
separation performance in the combine. Includes instructions on how/when to use bundle
components. (S660, S670, S680, S690) (PIN 775000 -).
BH84534
Sectionalized Flat Bar Concave Cover Plates (Set of 3)
577.50
For use in Large Wire and Small Wire Concaves Only. Set of 3 covers with 4 pieces to make
one complete cover. For additional threshing in hard to thresh crops. Can also be used to
change crop distribution to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660,
S670, S680, S690).
BH84535
Sectionalized Round Bar Concave Cover Plates (Set of 3)
108.90
For use with round bar concaves only. Covers used to even distribution of material to cleaning
shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
BH84229
Small Wire Concaves (Set of 3) - Wide Body
2,390.30
Not recommended for corn. Recommended for small grain and very brittle straw. (9660, 9760,
9860, 9670, 9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10388
Small Wire Concaves (Set of 3) - Wide Body
Not recommended for corn. Recommended for small grain and very brittle straw. (For MY15
and later S650, S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 26
2,390.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Equipment for Base Machine
PREMIUM OPERATOR'S CAB:
Pressurized Cab with HVAC ClimaTrak
Premium Storage Package
Premium operators seat
Actively Cooled Refrigeration Unit
Windshield Wiper (2-Blades) with Washer Dual
Tilt-Telescoping Steering Column
Seat with Air Suspension
Training Seat
Driver and Training Seat Belts
Beacon lights
Pull-down front sunshade 3-Position Pivoting
Operator's Ladder
Two adjustable heated cab mounted mirrors
Large Cup Holders
Auxiliary Power Outlet Strip
Business Band Radio Pre-wire
Basic Radio Package AM/FM Stereo Radio and
CD-Player
Antenna and two speakers
Auxiliary input jack located on front of radio
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Electro-Hydraulic Controlled header and separator
controls
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
CommandCenter color display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold
Chopper position Video Camera Application (if
equipped)
TouchSet (Automatic Combine Adjustment)
Harvest Monitor AutoTrac Ready Wiring Harness and
Steering Components with Harvest Monitor System
LESS
GreenStar Display JDLink capable
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and Unloading
Auger Engage Controls
Quick-Stop Header/Unloading Auger
Disengage Switch
Draper Variable Belt Speed In-Cab Control
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine rpm
Fuel level and temperature gauge
Deck plate and dial-a-speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active Header float system
Header Height Sensing System
LIGHTING:
Standard lighting package
Overhead work lights(four)
High beam driving lights(two)
Low beam driving lights(two)
Transport and Field Lamps (six)
Grain Tank and Unloading Auger Lamps (two)
Warning and Tail Lamps with Integral Turn Signals
(four)
Rotating beacon lights (three)
SideFinder Lights (two)
Cleaning Shoe Lights
Exit Lighting Rear Residue Discharge Lights (two)
Stubble Lights (two)
Deceleration Warning Light
Service Lights for Premium Cab
FEEDERHOUSE:
Heavy-Duty Feederhouse
17 Degree Fore/Aft Adjustable front tilt frame
Heavy-Duty Reverser with Push Button
Electro-Hydraulic Shift Engagement
Single-Point Electric Hydraulic Hookup and
Latching System
2-Speed Feeder Chain
Stone Trap with Manual Dump
THRESHING AND SEPARATING:
TriStream Rotor Threshing Technology
762 mm Diameter (30 in.) Feeding and threshing
section
838 mm Diameter (33 in.) Separating Section
Total Rotor Length of 3168 mm (124.7 in.)
15 Grain Threshing Elements
Standard Feed Accelerator 10-Wing 420 mm (17 in.)
Diameter with 30 serrated wear strips
Two speed drive: 440/800 rpm
(corn/grain) Cast Separator Grates with 19 open
rows. 1.54 sq m total area 20
Separator Grate Blanks
Separator Drive
210-1000 rpm Dual-Range Posi-Torq
Discharge Beater and Grate
Five wing discharge beater with 10 wear strips
(Tri-Stream)
Cast Finger
Discharge Beater Grate 0.36 sq m total area
Discharge Beater Grate 0.36 sq m total area
Radial Pin Clutch
Three Concave Sections 1.1 sq m total area Round
Bar Concave (Corn)
CLEANING:
2-Stage S-Series Cleaning System has:
12 Blades 500 mm Diameter (20 in.)
Dual Discharge Cleaning Fan
Deep Tooth Remote Adjustable Chaffer and Sieve
(corn)
Separator Air Discharge Chute Agitators
GRAIN HANDLING:
300 bu (10,600L) Grain Tank
3.3 (120L) bu per sec (average)
Unloading System with Unloading Auger
Manual Folding Grain Tank Loading Auger/Extensions
RESIDUE MANAGEMENT:
Wing Blade Wide-Spread, Fine Cut, 2-Speed
Chopper with Integrated Chaff Spreader and
single-point adjustable knife bank
ENGINE:
John Deere 6 Cylinder 6090H (9.0L)
Rated Speed at 2200 RPM
Rated Power "ECE R120"(kw/hp) 292/391
Power [email protected] Speed(kw/hp) 25/34
Rate [email protected](kw/hp) 313/419
Peak [email protected](kw/hp) 335/449
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
PowerTech Plus Diesel Engine Technology with
turbocharger and air-air aftercooler
Electronically Controlled Fuel Injection and fuel
shutoff
200 amp Alternator
950 L (250 gal. ) Fuel Tank
Rotary Screen Air Intake with Vacuum Pickup
Automatically Tensioned Poly-V Accessory Drive
Belts
Standard Capacity Engine Pre-Cleaner and air
cleaner filter system
High Capacity Wide Spaced Tube Radiator
Air Scoop Cooling Technology
WHEELS AND DRIVES:
Drive Wheels and Tires
Steering Wheels and Tires
Speed Hydrostatic Ground Drive System ProDrive
Transmission with Harvest Smart Feedrate Control
Heavy-Duty Final Drive Adjustable Rear Axle with
Heavy-Duty Spindles
HYDRAULICS:
Open Center Hydraulic System
Proportional Header Height, Reel and spreader
speed control
High Capacity (15 gpm) System and Single Piece
Integral Valve
Assembly
Header Suspension System
Active Float Mode and .7 Liter Accumulator
Reel Fore/Aft Hydraulics
110 kW Heavy-Duty Tilt Cylinder, High Torque,
Variable Speed Drive System -
CODE
80 mm (3.15 in.) Lift Cylinders
SERVICEABILITY:
Full Composite Flip-Open Side Shields
Central Lube Charts
Easy Access Lube Banks
Hydraulic Diagnostic Receptacles
Steel Tool Box with Tray
Battery Storage Container to Ground Level Extend Battery Posts and Cut-Off Switch
MISCELLANEOUS:
One 10-lb Type ABC Fire Extinguisher (front
mounted) not included for Russia
One 2.5 gal. Water Fire Extinguisher. Shipped
empty, requires filling at pre-delivery.
(rear-mounted) not included for Russia
Independent Hydraulic Brakes Park Brake
Back Up Alarm
Composite Styling with Air Scoop
Advanced Air Intake
CAN-BUS Electronic On-Board Communication
System with Solid State Power Distribution Centers
Temporary Surface Rust/Corrosion Protection
(Export Only)
LESS HEADER EQUIPMENT
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois.
01JEH
S670 Combine - HX (Model Year 2017)
440,453.00
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
DESTINATION
If additional languages for Operator's Manuals are required, order online from
http://techpubs.deere.com/.
North America
0202
USA
1,309.00
Include Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined
in the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0184
Canada
1,309.00
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
Includes Final Tier 4 Certified Engine
OPERATOR'S MANUAL
0409
English
In Base Price
0413
French
Same Price
0437
Spanish
Same Price
0430
Portuguese
Same Price
0426
Chinese (sourced from NA)
Same Price
0504
General Purpose Regular Wear Package
VALUE PACKAGES
In Base Price
Includes: Separator Grate Covers. Requires: 4880 TriStream Rotor Regular Wear, 4832
Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0505
General Purpose Extended Wear Package
In Configuration
Includes: Separator Grate Covers. Requires: 4883 TriStream Rotor Configuration Extended
Wear Densepack,4832 Dyna-Flo PlusCleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0506
Coarse Grain Package
In Configuration
Requires: 4880 TriStream Rotor Regular Wear, 4834 Dyna-Flo PlusCleaning Shoe Deep
Tooth Adjustable Chaffer and Bottom Sieve with TouchSet. Includes additional components to
optimize grain quality in high moisture corn.
0507
Small Grains Package
In Configuration
Includes: Separator Grate Covers. Requires: 4885 Variable Stream Rotor Configuration
Regular Wear, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0510
Rice Package
3,735.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines. Requires: 4886 Rice Extended Wear Variable Stream
Rotor Configuration, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve
with TouchSet, Extended Wear Grain Handling code 5234.
0598
Custom Configuration
In Configuration
7015
Final Tier 4 Certified Engine
1121
Premium Cab
ENGINE EMISSION LEVEL SELECTION
In Base Price
OPERATOR'S STATION
In Base Price
Includes Premium Storage Package, Actively Cooled Refrigeration Unit, Dual Tilt Steering
Column with Foot Rests, Electric Adjust Heated mirrors, Enhanced Cab Styling.
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
RADIO
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
in right hand storage console, two speakers and external antenna. Only available with
Premium Cab 1121.
1413
Premium Radio Package with XM Radio
352.00
For U.S. and Canada Markets only. AM/FM Stereo, Weatherband, Compact Disc Player,
with MP3 file support, Remote Controls, USB port in right hand storage console, Auxiliary
Input Jack located in right hand storage console, Bluetooth capable including microphone,
Integrated Bluetooth Phone Book connection through CommandCenter, Audio-streaming with
compatible Bluetooth devices, XM Satellite capable including Satellite Antenna (Subscription
Required), Two Speakers, Subwoofer, and External Antenna. Volume, Speed Compensation,
bass, and treble radio functions can be viewed and configured on the CommandCenter
Display. Only available with Premium Cab 1121.
SEAT
1221
Enhanced Air Suspension Seat
In Base Price
Cloth operator and instructor seats. Only available with Premium Cab 1121.
1222
Leather Seat Package
2,100.00
Includes all features of the enhanced air suspension seat. In addition, includes leather covered
operator and instructor seat, heated and ventilated operator seat and leather wrapped steering
wheel.
Only available with Premium Cab 1121.
LIGHTING
1360
Standard Lighting
In Base Price
Includes eight cab roof mounted halogen lamps: Four overhead work lights, two high beam
driving lights, and two low beam driving lights.
1370
Standard Lighting and Header Extremity Lights
152.00
Includes standard lights plus two halogen lamps mounted on the lower cab fascia.
1375
LED Lighting Package
3,410.00
Eight cab roof mounted lights: Four overhead LED work lights, two halogen high beam
driving lights, and two halogen low beam driving lights. Only available in Australia and New
Zealand.
1379
Premium LED Lighting Package & Header Extremity Lights
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities. CommandCenter are capable
of running AutoTrac and AutoTrac RowSense only (with appropriate activations purchased
and StarFire Receiver installed). GS3 2630 Displays are capable of all AMS functionality.
Includes Access Manager user lockout software, video capability and armrest bracket. One
video camera input pre-wired in the cab. Connector located on the outside rear of the cab. See
Parts for available cameras.
The GreenStar 3 2630 Display is required for advanced AMS
applications.
When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
additional GreenStar display.
27 February 2017 US & Canada
3-COMBINE- 4
3,562.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DISPLAY ...Continued...
1823
Touchscreen GS3 CommandCenter 7 in. (17.8 cm) Color Display
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
4,635.00
AG MANAGEMENT SOLUTIONS
Accuracy is dependent on the receiver signal level
1803
AutoTrac Ready with Harvest Monitor
For Australia/NewZealand/China: AutoTrac Ready.
moisture and mass flow sensors).
180A
In Base Price
Harvest Monitor Complete (Includes
AutoTrac Complete with Harvest Monitor (SF3) [StarFire 6000 Receiver]
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription [StarFire 6000
Receiver]
12,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and 1 Year
SF3 Subscription
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription [StarFire 6000
Receiver]
14,895.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and RTK
Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
180D
AutoTrac Complete with Harvest Monitor (SF1) [StarFire 6000 Receiver]
7,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation.
Harvest Monitor Complete (Includes moisture and mass flow sensors).
180E
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF3) [StarFire 6000
Receiver]
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
AutoTrac RowSense requires a properly equipped head.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, 1 Year SF3
Subscription and AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
27 February 2017 US & Canada
3-COMBINE- 5
15,445.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Subscription. Harvest Monitor Complete (includes
moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
AutoTrac RowSense requires a properly equipped head.
180H
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF1) [StarFire 6000
Receiver]
10,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
A subscription is required for SF3 accuracy. AutoTrac RowSense requires a properly equipped
head.
CONNECTIVITY
Machine connectivity functions require cellular coverage. Usage of the JDLink System
requires customer's acceptance of the terms of the John Deere Telematics Subscription
Agreement, which describes John Deere's access and use of the data collected by the system.
JDLink customer account must be created to access JDLink Connect data.
Options with
JDLink Connect include: -1 Ethernet harness connecting the MTG to the primary
display/integrated processor, -1 Ethernet harness routed from the MTG to the optional
display port, -Antenna wiring harness for the Machine Communication Radio (MCR), and
the JDLink hardware: integrated cab wiring harness, antenna, Modular Telematics Gateway
(MTG) with Service ADVISOR Remote capability, and JDLink Ultimate Activation.
Subscription length of contract varies; Annual subscription renewal required after term of
service for continued functionality. Option availability limited by specific geographical
regions. Please refer to region specific price pages for appropriate ordering codes.
Use
of this service, and all rights and obligations of John Deere and the Customer (as identified in
the applicable agreement), are governed by the terms and conditions outlined in the
applicable Services and Software agreements available at www.JohnDeere.com/Agreements.
If these terms and conditions are not agreeable do not proceed and do not use the service.
188U
JDLink Hardware only - Subscription Not Included
In Base Price
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
27 February 2017 US & Canada
3-COMBINE- 6
No Charge
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
189A
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
188S
JDLink Connect 5 Year subscription
1,600.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States, Canada, and Australia through
dealers that meet New Model Qualification requirements.
189B
JDLink Connect 5 Year subscription and Machine Communication Radio
5,299.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
MOBILE APPLICATIONS
1950
Less Harvest Mobile
-500.00
Not available in United States, Canada, Australia, and New Zealand.
1951
Harvest Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
27 February 2017 US & Canada
3-COMBINE- 7
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MOBILE APPLICATIONS ...Continued...
separately from StellarSupport/JD Marketplace. Only available in United States, Canada,
Australia, and New Zealand.
1953
Wireless Data Server (WDS) with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality. Only available in United States, Canada, Australia, and New Zealand.
MACHINE AUTOMATION
1959
In Base Features: Interactive Combine Adjustment, Touch Set, VisionTrak, Harvest Smart,
and Engine Speed Management
In Base Price
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
1961
In Base Features PLUS Active Terrain Adjustment
3,020.00
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
FEEDERHOUSE TILT SELECTION
Level Land Feederhouse - Fixed Speed with Reverser
3031
110kW High Torque Fixed Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
-15,746.00
For use with Rigid Auger Platforms 30 Ft. and less.
Rigid Draper Platforms 35 Ft. and less
Belt Pickup Platforms.
Level Land Feederhouse - Variable Speed with Reverser
3027
110kW High Torque Variable Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
-9,699.00
For use with StalkMaster Corn Heads 8-rows and less. Non-StalkMaster Corn Heads
12-rows and less. Rigid Auger Platforms 30 Ft. and less. Rigid Draper Platforms 35 Ft.
and less. Belt Pickup Platforms.
Lateral Tilt Feederhouse - Fixed Speed with Reverser
3056
110kW Heavy Duty Tilt Cylinder, High Torque Fixed Speed Drive System - 3.15 In. (80 mm)
Lift Cylinders
-8,891.00
For use with Rigid and Flex Auger Platforms 35 Ft. and less.
Rigid and Flex Draper Platforms 40 Ft. and less.
Belt Pickup Platforms.
3055
110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders
w/ Fore Aft Tilt
-6,047.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 40 ft or less, Rigid and Flex Auger Platforms 35 ft less,
Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro handle).
Lateral Tilt Feederhouse - Variable Speed with Reverser
3054
110 kW Heavy-duty Tilt Cylinder, High-torque, Variable Speed Drive System - 3.15 In. (80
mm) Lift Cylinders
For use with StalkMaster Corn Heads 8-rows and less. Non-StalkMaster Corn Heads
12-rows and less. Rigid and Flex Auger Platforms 35 ft and less. Rigid and Flex Draper
Platforms 40 ft and less. Belt Pickup Platforms.
27 February 2017 US & Canada
3-COMBINE- 8
-2,845.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TILT SELECTION ...Continued...
3061
110kw Heavy-duty Dual Tilt Cylinders, Variable Speed Drive System - 3.15 In. (80 mm) Lift
Cylinders w/ Fore Aft Tilt
In Base Price
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with StalkMaster Corn Heads 8-rows or less, Non-StalkMaster Corn Heads
12-rows or less, Rigid and Flex Draper Platforms 40 ft or less, Rigid and Flex Auger
Platforms 35 ft or less, Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro
handle).
3059
202 kW CommandTouch Multi-Speed Drive System - Heavy-duty Tilt Cylinder - 3.15 In. (80
mm) Lift Cylinders
5,195.00
For use with StalkMaster Corn Heads 12-rows and less. Non-StalkMaster Corn Heads
12-rows and less. Rigid and Flex Auger Platforms 35 Ft. and less. Rigid and Flex Draper
Platforms 40 Ft. and less. Belt Pickup Platforms. Requires ProDrive.
3062
202kw CommandTouch Multi-Speed Drive System, Dual-tilt Cylinders - 3.15 In. (80 mm)
Lift Cylinders w/ Fore Aft Tilt
8,040.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft).
For use with StalkMaster Corn Heads 12-rows or less, Rigid and Flex Auger Platforms 35 ft
or less, Rigid and Flex Draper Platforms 40 ft or less, Belt Pickup Platforms. Requires
ProDrive.
Includes Code 8141 (Advanced Hydro handle).
ROTOR TYPE
Wear type will include separator and concaves.
4880
TriStream Rotor Configuration Regular Wear
In Base Price
Recommended for Corn, Soybeans, and General Purpose Grains.
4883
TriStream Rotor Configuration Extended Wear (Densepack Ready)
1,954.00
Recommended for Corn, Soybeans, and General Purpose Grains.
4884
Custom Cutter's Extended Wear Separation and Concave Package
7,604.00
Includes: Extended Wear (Thick Skin) Tri- Stream Rotor, Extended Wear Threshing Elements,
Separator Tines and Rotor Top Covers. Also includes: 20 Separator Grate Covers and
Extended Wear Round Bar Concaves for field installation. Requires Code 4832 (Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet) and Code 4300
(Factory Installed Small Wire Concave).
4885
Variable Stream Rotor Configuration Regular Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
4886
1,887.00
Includes:
Variable Stream Rotor Configuration Extended Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
3,522.00
Includes:
CHAFFER AND SIEVE
4832
Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with
TouchSet (Electric Shoe Adjust)
In Base Price
Includes 9486: Separator Grate Covers (set of 20)
4834
Dyna-Flo Plus Cleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with
TouchSet (Electric Shoe Adjust)
Not recommended for use in food corn, popcorn or small grains. Includes additional
components to optimize grain quality in high moisture corn.
27 February 2017 US & Canada
3-COMBINE- 9
Same Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING
Wear type of factory installed concaves is determined by wear type of rotor selection. For
specific recommended crop applications for each of the three type Concaves offered, refer to
Agricultural Sales Manual.
4340
Round Bar Concave
In Base Price
4300
Small Wire Concave
448.00
4390
Extended Wear Small Grain Combination Concave
1,888.00
Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and
25-wire mid and rear Concaves). Only available in Australia and New Zealand.
4302
Large Wire Concave
323.00
5232
Regular Wear Grain Handling System
5234
Extended Wear Grain Handling System
GRAIN HANDLING WEAR PACKAGE
In Base Price
4,206.00
Includes: Extended Wear, Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank
Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy Duty Grain Tank
Cross Auger, and Vertical Unloading Auger.
GRAIN TANK EXTENSIONS AND COVERS
5371
Manual Grain Tank Extensions, LESS Covers
5373
Power Folding Grain Tank Covers
5424
22.5 Ft. (6.9M) 1-Piece Unloading Auger
In Base Price
5,273.00
UNLOADING AUGER
In Base Price
Not available for Export.
5425
22.5 Ft. (6.9M) Power Folding Unloading Auger
5,875.00
5426
22.5 Ft. (6.9M) 2-Piece Unloading Auger
1,196.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5427
22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger
515.00
Not available for export.
5428
26 Ft. (7.9M) Unloading Auger
2,394.00
Not available for export. Recommended for Platforms up to 40 Ft. and Corn Heads up to
16-rows 30 In.
5429
26 Ft. (7.9M) Unloading Auger
3,589.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5431
26 Ft. (7.9M) Power Folding Unloading Auger
8,269.00
5432
28.5 Ft. (8.7M) Unloading Auger
4,103.00
Not available for Export.
5433
28.5 Ft. (8.7M) Unloading Auger
Export Only. No homologation, auger comes uninstalled and requires dealer installation.
27 February 2017 US & Canada
3-COMBINE- 10
5,300.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
RUST PROTECTION
5600
Rust Protection for Transit
298.00
Required for protection of combine from road salt during transportation from factory during
winter months and for Export. Required for Export.
5601
LESS Rust Protection for Transit
In Base Price
Not available for Export.
RESIDUE DISPOSAL
Deluxe Residue
Includes: Fine Cut Chopper - 2-Speed Chopper drive with Neutral, Integrated Chaff Spreader.
5752
Deluxe Residue - Manual Adjust Vane Tailboard
In Base Price
Recommended for Platforms 30 ft and less.
5756
Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind
compensation
7,008.00
Recommended for platforms 30 ft to 50 ft
Premium Residue
Includes: 2-Speed Chopper with Neutral - Drop straw/spread chaff, Chop/spread straw and
chaff, Integrated Chaff Spreader.
5758
Premium Residue - In-cab operator controlled Advanced PowerCast powered tailboard with
wind compensation
8,999.00
Recommended for Platforms 30 Ft. and greater. Not recommended if a majority of your
harvested crop is corn. If used in corn, it is recommended to install KXE10135 and
KXE10147.
With Fine Cut Chopper
Straw Spreaders
5722
Twin Disc Straw Spreader with Integrated Chaff Spreader and Variable Speed Control
-6,557.00
Recommended for Platforms 30 ft or greater.
5724
Wide Spread Twin Disc Straw Spreader with Integrated Chaff Spreader, Barrier Hoops,
In-cab Independent Disk Speed
-4,791.00
Recommended for Platforms 30 ft to 40 ft.
TRANSMISSION
2012
3-Speed Transmission Electric Shift and Electric Brake
-12,936.00
Requires Premium Cab (code 1122).
2020
ProDrive Transmission with Harvest Smart Feedrate Control
Requires Premium Cab (code 1122).
DRIVE WHEELS, TIRES, AND TRACKS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
27 February 2017 US & Canada
3-COMBINE- 11
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6716
800/70R38 R1W 173A8 (Firestone)
-2,814.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 608C, 608C StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6646, 6664, or 6676.
6753
IF800/70R38 R1W 187A8 CFO
384.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 635D, 640D, 630FD, 635FD, 640FD, 608C,
608C StalkMaster ,612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, and 618C.
Available with steering tire options 6620, 6634, 6638, 6640, 6646, 6664, or 6674.
Available in Michelin (for all markets) or Firestone (not available in China).
6734
650/85R38 R1W Duals 173A8
11,798.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 618F, 622F, 625F, 630F, 635F, 625D, 635D, 630D, 640D, 630FD, 635FD,
640FD, 608C, 608C StalkMaster, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C,
and 618C.
Available with steering tire option 6620, 6634, 6638, 6640, 6646, 6674, 6664, or 6676.
Available in Firestone, Goodyear, or Michelin.
6746
520/85R42 R1 Duals 157A8 (Firestone or Goodyear)
3,312.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 630FD, 635FD, 608C, 608C
StalkMaster, 612C, 612C StalkMaster, 616C and 618C.
Available with steering tire options 6620, 6634, 6638, 6646, 6664, or 6676.
6751
520/85R42 R2 Duals (Firestone or Goodyear)
6,131.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
608C, 608C StalkMaster, 612C, 612C StalkMaster, 616C, and 618C.
Firestone brand is 165A8 and Goodyear brand is 162A8. Available with steering tire options
6620, 6634, 6638, 6646, 6664, or 6676.
6747
IF1250/50R32 CFO R1W 201B (Firestone Only)
14,370.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD,
640FD,608C, 608C StalkMaster, 612C, 612FC. 612FC StalkMaster, 616C, and 618C.
Available with steering tire options 6620, 6634, 6638, 6646, 6674, 6664, or 6676. This tire is
allowed with 300 mm, 400 mm, 454 mm axle spacers only.
6756
580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
8,446.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
608C, 608C StalkMaster, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, and
618C.
Available with steering tire options 6620, 6634, 6638, 6646, 6664, or 6676.
6759
IF900/60R32 CFO R1 182A8 (Firestone only)
In Base Price
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
608C, 608C StalkMaster, 612C, 616C, and 618C.
Available with steering tire options 6620, 6634, 6646, 6664, or 6638.
6762
IF520/85R42 CFO R1W 169B Duals (Goodyear or Firestone)
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
27 February 2017 US & Canada
3-COMBINE- 12
12,954.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
608C, 608C StalkMaster, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, and
618C.
Available with steering tire options 6620, 6634, 6638, 6646, 6664, or 6676.
6764
VF520/85R42 CFO R1W 177A8 Duals (Michelin)
18,864.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
608C, 608C StalkMaster, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, and
618C.
Available with steering tire options 6640 or 6674.
6766
IF900/65R32 CFO R2 191A8 (Goodyear)
2,720.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
608C, 608C StalkMaster, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C and
618C.
Available with steering tire options 6620, 6634, 6638, or 6676.
6769
LSW1250/35R46 195D R2 (Goodyear)
23,170.00
For use with the following front end equipment only: 618R, 620R, 622R, 625R, 630R, 618F,
620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,608C,
608C StalkMaster, 612C, 612FC. 612FC StalkMaster, 616C, and 618C.
Requires 2020 ProDrive. Available with steering tire options 6634, 6676, and 6643.
6780
LSW1100/45R46 195D R1W (Goodyear)
10,134.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD,
640FD,608C, 608C StalkMaster, 612C, 612FC. 612FC StalkMaster, 616C, and 618C.
Requires 2020 ProDrive. Available with steering tire options 6620, 6634, 6638, 6676, and
6643.
6788
LSW 800/55R46 R1W 190D (Goodyear)
98.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 625D, 608C, 608C StalkMaster and 612C.
Available with steering tire options 6620, 6634, 6638, 6643, or 6676.
6755
Tracks Complete Combine with 36 in. Ag. Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive, 12 In.
(300mm) axle extensions, dual (1047mm) ladder landing extension, and short (1352mm)
ladder. Available with steering tire options 6620, 6634, 6638, 6640, 6646, 6664, 6674, and
6676. Available in the United States and Canada.
6760
Tracks Complete Combine with 36 in. Rice Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive, 12 In.
(300mm) axle extensions, dual (1047mm) ladder landing extension, and short (1352mm)
ladder. Available with steering tire options 6620, 6634, 6638, 6640, 6646, 6664, 6674, and
6676. Available in the United States and Canada.
6700
LESS Drive Wheels and Tires
-6,136.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6702
LESS Drive Wheels and Tires
-5,946.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6703
LESS Drive Wheels and Tires
-6,116.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6704
LESS Drive Wheels and Tires
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1455 mm length ladder.
27 February 2017 US & Canada
3-COMBINE- 13
-6,026.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
Refer to Tire Compatibility Charts for tire selection.
6705
LESS Drive Wheels and Tires
-5,926.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6706
LESS Drive Wheels and Tires
-5,636.00
Includes 1047 mm extension, ladder pivot module, and ISO 1352 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6707
LESS Drive Wheels and Tires
-3,594.00
Includes 1047 mm extension, ladder pivot module, and ISO 1455 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6708
LESS Drive Wheels and Tires
-5,446.00
Includes 1047 mm extension, ladder pivot module, and ISO 1554 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
STEERING WHEELS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6620
620/75R26 R1W 166A8 (Goodyear Only) or 23.1R26 166A8 R1 (Firestone Only)
548.00
Only available in Firestone.
6634
750/65R26 (Goodyear or Firestone)
2,378.00
Goodyear is a 750/65R26 R1W 166A8 and Firestone is 750/65R26 R1W 169A8.
6638
600/70R28 R1W (Firestone or Goodyear)
In Base Price
Goodyear is a 600/70R28 R1W 161A8 and Firestone is a 600/70R28 R1W 164A8.
6640
VF620/70R26 CFO 173A8 TL CEREXBIB (Michelin Only) - 3.49m width
2,446.00
6643
LSW IF710/60R30 CFO R1W 177D (Goodyear only)
2,784.00
6646
VF750/65R26 R1W 177B (Firestone Only)
3,746.00
6674
VF750/65R26 CFO R1W 177A8 (MICHELIN)
5,146.00
6676
VF710/65R26 R2 177D (Goodyear)
5,346.00
6600
LESS Steering Wheels and Tires
-4,387.00
Not available for Export. For use with 28L-26 In. only. Includes Axle Stops. Not available
with LSW tires 6769 and 6780.
6602
LESS Steering Wheels and Tires
-4,407.00
Not available for Export. For use with all Steering Tires EXCEPT 28L-26 in.
6664
VF620/75R26 R1W 172B (Firestone)
27 February 2017 US & Canada
3-COMBINE- 14
3,548.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
STEERING WHEELS ...Continued...
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
2220
2-Wheel Drive
In Base Price
2240
Powered Rear Axle, 2-Speed 4-Wheel Drive
8700
Engine Coolant Heater - 110 Volt (Not available for Export)
8701
Engine Coolant Heater - 220 Volt (Export Only)
106.00
8709
Fuel Pre-Filter/Water Separator
589.00
23,824.00
ENGINE
68.00
In place of Base Equipment Filter/Water Separator.
Recommended where fuel quality is a concern.
8649
Factory Installed Air Compressor
3,065.00
Includes two hoses and two air wands that can be stored on the machine. Includes two
connection points on the combine: one located at ground level above the left rear tire and one
located on the engine deck. Not available in China.
OPERATOR'S STATION
8141
Advanced Hydrohandle
158.00
Included with 3055, 3061, 3062, 3064 and 3063 (Hydraulic Feederhouse Platform Tilt (Fore
Aft)). Also required with 18BJ and 18CJ (JDLink Connect/Machine Communication Radio).
Enables 600D Header Platform Tilt Operation, integrated in the hydrohandle functions.
CAMERA OBSERVATION SYSTEM
8145
Camera Ready
338.00
Cameras are not included. Includes harnesses and brackets factory installed at the unloading
auger to enable view of auger boot location over the grain cart when unloading auger is
swung out, at grain tank covers to enable grain tank visibility and beneath the rear beacon
light to enable rear view.
Requires 2630 Display on corner post or CommandArm for use.
FEEDERHOUSE TYPE
8315
Feed Accelerator Slow Speed Drive
475.00
320-770 RPM. Recommended only for use in edible beans, food corn, or popcorn when
optimum grain quality is desired in these crops. Not recommended for Rice. Not available with
4885 or 4886. Not available with code 9315.
FAST (FEED ACCELERATOR AND STONE TRAP)
9315
Feed Accelerator Slow Speed Drive
320-770 RPM. Recommended for use in edible beans, food corn, and popcorn. Certain
conditions may see a straw quality improvement with slower accelerator speeds, but material
handling may be sacrificed when in tougher conditions. Not recommended for use in
Rice. Available on both the TriStream and Variable Stream Rotor. For Zweibrucken-built
machines, only available for Australia and New Zealand. Not available with Feed Accelerator
Slow Speed Drive (code 8315).
27 February 2017 US & Canada
3-COMBINE- 15
1,752.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FAST (FEED ACCELERATOR AND STONE TRAP) ...Continued...
9317
Feed Accelerator Smooth Wear Strips (Set of 30)
348.00
Recommended for improved grain quality in crops such as food corn and seed crops.
The smooth wear strips on the feed accelerator are only compatible with the TriStream rotor
FAST system.
FEEDERHOUSE TYPE
9300
Feederhouse Drive Oil Cooler
459.00
Recommended for use with chopping Corn Heads. For combines (PIN 700801 and Up). Comes
in base machine when a Multi-Speed or Heavy Duty High Torque Variable Speed Drive
Feederhouse are ordered.
9311
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900 Series Platforms with Single Point Latching System.
Please refer to Ag Sales Manual for other compatibility information.
9312
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
9314
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
SEPARATION
8499
Heavy Duty Separator Grates
3,735.00
Available only with Variable Stream Rotor. Includes Interruptor Bars.
Included with 0511, 0510, 0508, 0518.
CHAFFER AND SIEVE
8220
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
-1,565.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and Dual Landing Extension and related
parts.Reference DTAC Solution 61907 for information needed for proper wheel and tire
equipment in a SideHill application. Not for export.
8221
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and related parts. Reference DTAC Solution
61907 for information needed for proper wheel and tire equipment in a SideHill application.
Not for export.
8480
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
27 February 2017 US & Canada
3-COMBINE- 16
-1,565.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
8481
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
CONCAVES AND THRESHING
9404
Densepack Threshing Tines for Variable Stream Rotor
826.00
Only available with Rotor Option Codes 4885 and 4886. Additional threshing tine base
weldments for installation into the densepack locations of a Variable Stream Rotor only. Can
be used to improve material handling in some tougher conditions such as rice and grass seed
harvest. May decrease machine performance if used in dry brittle crop conditions.
Wear plate kits KXE10049 (rice wear plates), KXE10048 (grain wear plates) must be ordered
separately.
Rice machines from factory already come with these tines installed.
9433
Sectionalized Concave Cover Plates for Large Wire and Small Wire Concaves only
1,132.00
For additional threshing in hard to thresh crops.
9437
Additional Threshing Concave Insert Bars for Round
Bar Concaves (set of two)
869.00
One set required per concave section. Use if harvesting small grains with Round Bar
Concaves.
9425
Extended Wear (Heat-Treated) Round Bar Concaves (set of three)
3,472.00
Best for corn and soybeans.
Not recommended for rice, canola, grass seed.
Use in high yielding or abrasive conditions.
9426
Small Wire Concaves (set of three)
3,703.00
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, rice, sunflowers.
9427
Large Wire Concaves (set of three)
3,564.00
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
9435
Sectionalized Concave Cover Plates (set of three) Round Bar Concaves only
223.00
This cover assembly is used for additional threshing in hard to thresh crops and to even out
the distribution of crop to the cleaning shoe.
9428
Extended Wear Small Wire Concaves (set of three)
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, sunflowers.
27 February 2017 US & Canada
3-COMBINE- 17
5,288.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
9429
Extended Wear Large Wire Concaves (set of three)
4,927.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
SEPARATION
9486
Separator Grate Covers (set of 20)
1,174.00
Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In base
equipment for Small Grain combines. Includes five sets of four covers (20 total).
9403
Rice Performance Enhancement Package
2,495.00
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components that when used in certain configurations (dependent on crop/conditions) may
enhance the separation performance of the combine. Includes instructions on how/when to
use bundle components. Only available with 0510 and 0511
CHAFFER AND SIEVE
9482
SideHill Performance Package
829.00
Recommended for sidehill conditions to reduce grain loss. Includes full-length tall chaffer
dividers, grain return pan partitions and grain agitator paddles.
9497
Adjustable Front Chaffer Louvers (Set of 4)
765.00
Recommended for crops with dense green stalks.
GRAIN HANDLING
8525
Clean Grain Auger and Fan Bottom Protection Shielding
295.00
9510
Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough
337.00
9522
Additional "Full" Grain Tank Sensor
208.00
GRAIN HANDLING
For sidehill applications. Already in base equipment on HillMaster machines.
TIRE BRAND PREFERENCE
Tire brand preference choice is for both front and rear tires.
by front drive tire preference choice.
9660
Rear tire brand is determined
No Brand Preference
No Charge
Required if only one brand of drive tire is listed. Not available in China.
9661
Firestone Brand Preferred
800.00
This Code is not required if Firestone is the only brand listed for drive tire. Use Code 9660.
9662
Goodyear Brand Preferred
800.00
This Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9660.
Not available in China.
9663
Michelin Brand Preferred
This Code is not required if Michelin is the only brand listed for drive tire. Use Code 9660.
27 February 2017 US & Canada
3-COMBINE- 18
1,200.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS
All spacers, except Code 9669, include required Ladder Extension. Please refer to the S-Series
tire spacing chart on Ag Sales Manual.
9668
2 In. (50mm) Wheel Spacer
406.00
Not available with Codes 9669, 9220, 9221, 9222, 9223, and 9224.
9669
4 In. (96 mm) Wheel Spacer (no Ladder Extension)
749.00
Not available with Codes 9668, 9220, 9221, 9222, 9223, and 9224.
9220
4 In. (105 mm) Axle Spacer
2,419.00
For increased mud clearance. Not available with dual tire codes 6734, 6746, 6751, 6756.
9221
6.5 In. (165mm) Axle Spacer
3,699.00
Not available with dual tire codes 6734, 6746,6751, 6756. May only choose one of: 9220,
9221, 9222, or 9224.
9222
12 In. (300 mm) Axle Spacer
3,788.00
Not available with dual tire codes 6734, 6746,6751, 6756.
9223
16 In. (400 mm) Axle Spacer
3,852.00
9224
18 In. (454 mm) Axle Spacer
4,133.00
Not available with dual tire codes 6734, 6746,6751, 6756.
HITCHES
8640
Semi-Automatic Rear Hitch with Wiring Harness, allows a single operator to connect trailer
to combine
1,022.00
Export Only. Rated 4500 kg.
8641
Manual Rear Hitch with Wiring Harness for Towing Header Trailer
757.00
Export Only. Rated 4500 kg.
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BXE10751
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S660 and S670 combines equipped with ProDrive.
BXE10786
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S650, S660, and S670 combines not equipped with ProDrive.
BXE10713
4WD Conversion Bundle
25,034.90
For S660, S670 and S670 ProDrive: Model Year 2012-Model Year 2013 machines. Due to the
larger wheel bolt pattern diameter, new rims (tires optional per rim size) are required with kits
BXE10712, BXE10713, and BXE10716. Please note: the wheel bolts themselves are also
larger; 2WD wheel bolts are M16 and 4WD wheels bolts are M22.
BXE10716
4WD Conversion Bundle - S650, S660, S670
For S650, S660, S660 ProDrive, S670 and S670 ProDrive: Model Year 2014-Model Year 2015
machines. Due to the larger wheel bolt pattern diameter, new rims (tires optional per rim size)
are required with kits BXE10712, BXE10713, and BXE10716. Please note: the wheel bolts
themselves are also larger; 2WD wheel bolts are M16 and 4WD wheels bolts are M22.
27 February 2017 US & Canada
3-COMBINE- 19
32,694.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Cab and Controls:
BXE10669
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900D and 900 Series Platfroms with Single Point
Latching System.
Please refer to Ag Sales Manual for other compatibility information.
BXE10670
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
BXE10697
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
BL15013
Smoker Option
60.45
For S550, S650, S660, S670, S680, S690 Combines. Replaces accessory power connector with
an ashtray and lighter.
KXE10433
Three Camera Bundle
1,403.77
Includes three Motec cameras (AXE41697) to be used in conjunction with factory installed
Camera Ready bundle code 8145. Cameras can be mounted to show views from the rear of the
machine, from the unloading auger, and the grain tank area of the combine. For use with
Model Year 2017 and newer machines.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
Cleaning:
AXE47285
10 mm Fixed Round Hole Sieve
2,202.18
S-series cleaning shoe: S660-S690. Available on MY16 and newer (PIN 785000 -).
AXE47286
3 mm Fixed Round Hole Sieve
S-series cleaning shoe: S650-S690. Available on MY16 and newer (PIN 785000 -).
27 February 2017 US & Canada
3-COMBINE- 20
2,097.31
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10729
Active Terrain Adjustment Conversion Bundle
3,654.20
Available on MY16 machines and newer (PIN 785000 -) ordered without the factory installed
Active Terrain Adjustment option.
BXE10692
Adjustable Front Chaffer Louvers
946.84
Recommended for crops with dense green stalks. Available for S650, S660, S670, S680, and
S690 MY16 and newer (PIN 785000 -).
BXE10475
Class 6/7 Side Hill Bundle
1,060.94
S650, S660, and S670. Also needed on S680 and S690 combines that are not equipped with an
extended front chaffer. Available on MY16 and newer (PIN 785000 -).
AXE47216
General Purpose Chaffer
1,569.90
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Sieve for MY16 and newer (PIN 785000 -).
AXE47218
General Purpose Sieve
1,356.84
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Chaffer for MY16 and newer (PIN 785000 -).
Engine:
SWDEF110VKIT 110V Pump Kit
858.57
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF12VKIT
12V Pump Kit
852.86
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF025
2.5 gal jug of John Deere Diesel Exhaust Fluid
0.00
11.75 x 9.5 x 7.6"; 25lbs. Full.
SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lid
1,680.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 36"W x 18"D x 22"H.
SWDEF275
275gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 45.75"; 2750lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF330
330gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 53.15"; 3141lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF055
55gal drum of John Deere Diesel Exhaust Fluid
0.00
Does not include drop tube/valve; 23.5 x 35"; 550lbs. Full.
SWDEFPDU60T 60gal Portable Dispensing Unit with lockable, hinged lid
1,864.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 45"W x 24"D x 30"H.
BXE10698
Air Compressor Conversion Kit
For S650, S660, S670 Combines equipped with Final Tier 4 Engines.
27 February 2017 US & Canada
3-COMBINE- 21
3,708.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10699
Air Compressor Conversion Kit
3,708.10
For S650, S660, S670 Combines equipped with Tier 2 Engines.
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
FAST (Feed Accelerator and Stone Trap):
BH84027
Contoured Serrated Feed Accelerator Wings
1,123.10
Provides fast yet gentler handling than the standard serrated wear strips. Recommended when
harvesting viney crops such as edible beans. Not for use in Rice. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84496
Expanded Stone Trap Door - Wide Body
1,573.00
Two-piece feed floor for improved rock protection. May reduce capacity in tough green
stemmed crops. (9660, 9760, 9860 PIN 720101 and Above.) (9670, 9770, 9870, S650, S660,
S670, S680, S690).
BXE10741
Feed Accelerator Slow Speed Drive
1,952.99
Available for S650, S660, S670, S680 and S690 MY16 and newer (PIN 785000-). 320-770
RPM. Recommended for use in edible beans, food corn or popcorn when optimum grain
quality is desired in these crops. Not recommended for use in Rice. Not recommended with the
Variable Stream rotor.
BH81489
Feed Accelerator Smooth Wear Strips (Set of 30)
372.90
For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops such
as popcorn, food corn, etc. Not for use in Rice. Conversion to standard corn/grain FAST
required if machine equipped with tough crop or tine fast (9660, 9760, 9860, 9670, 9770,
9870, S650,S660, S670, S680, S690).
BH84447
High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversion for combines
equipped with the Heavy Duty Posi-Torq Variable Speed Drive System
7,641.70
Recommended for use with chopping corn heads 8 Rows and larger, or high yielding green
stem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS, 9670
STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS, S660, S670, S680, S690 combines.
BH84582
Spike Feed Accelerator
4,699.20
For use in tough material handling rice conditions where rice is down and tangled. Not for use
with stripper headers. Not for use in corn/grain harvest. (9660, 9760, 9860, 9670, 9770, 9870,
S660, S670, S680, S690).
BH84416
Tine Feed Accelerator
4,453.90
For use in tough material handling rice conditions where slug. Note: Rice machines from
factory come with tine ffed accelerator installed. (9660, 9760, 9860, 9670, 9770, 9870, S660,
S670, S680, S690).
Grain Handling:
BXE10270
Additional "Full" Grain Tank Sensor
228.80
For S550, S650, S660, S670, S680, S690 Combines.
BXE10094
BH81519
Door, Regular Duty, Perforated - S660, S670, S680
256.30
Perforated Clean Grain Elevator Boot, Door-S550, S660, S670
209.00
Used in conjunction with BXE10094 (S660/S670) or BXE10095 (S550).
BH84034
Slow Speed Clean Grain Elevator Drive (Machines without Active Tailings: S550, S650,
S660, S670)
Only available for MY15 and older machines.
27 February 2017 US & Canada
3-COMBINE- 22
575.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
H86760
H229907
Steel Paddle Tailing Elevator for all 50 Series, 60 Series and 70 Series Combines, and
S550-S670 (Parts)
23.36
Steel Paddle Tailing Elevator for all 9770 STS, 9870 STS, S670, S680 and S690 Combines
20.19
Does not apply to S690 HillMaster.
Ladder Extensions:
BXE10121
230 mm Bolt-on Single Tire Platform
512.60
For S550, S660, S670, S680, S690 Combines. Includes 230 mm bolt-on platform and rail post.
BXE10122
330 mm Bolt-on Single Tire Platform
537.90
For S550, S660, S670, S680, S690 Combines. Includes 330 mm bolt-on platform and rail post.
BXE10120
Dual Tire Extension
1,590.60
For S550, S660, S670, S680, S690 Combines. Includes: Dual extension and applicable
mounting, hardware, extension handrails, and chains. (Serial Number 764999).
BXE10124
Long Length Ladder
1,940.40
For S550, S660, S670, S680, S690 Combines. Includes: 1554 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10420
Long Length Ladder
1,940.40
(Serial Number 765000-).
BXE10123
Medium Length Ladder
1,812.80
For S550, S660, S670, S680, S690 Combines. Includes: 1455 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10421
Medium Length Ladder
1,812.80
(Serial Number 765000-).
BXE10156
Short Length Ladder
1,688.50
For S550, S660, S670, S680, S690 Combines. Includes: 1352 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10422
Short Length Ladder
1,285.90
(Serial Number 765000-).
Residue Disposal:
KXE10135
BXE10158
APC Corn Kit
490.78
Advanced PowerCast Tailboard
7,227.00
For MY14 and Older S670, S680, S690 Combines.
BXE10354
Advanced PowerCast Tailboard
7,227.00
For MY15 and Newer S670, S680, S690 Combines.
BXE10178
Chopper Drive Shielding
497.20
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10357
Chopper Drive Shielding
497.20
For MY15 and Newer S660, S670, S680, S690 Combines.
KXE10147
Corn Kit OSB Cover
519.32
KXE10121
Deflector - PowerCast Tailboard
143.61
27 February 2017 US & Canada
3-COMBINE- 23
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
KXE10148
BXE10184
Distribution Kit - Standard Flex Residue
Fine Cut Chopper Drive Bundle
277.85
2,603.70
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10361
Fine Cut Chopper Drive Bundle
2,603.70
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10172
Fine Cut Chopper with Standard VTB Outlet
11,180.40
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10355
Fine Cut Chopper with Standard VTB Outlet
11,180.40
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10181
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10358
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10363
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Open Center Hydraulics (For MY15 and newer S660, S670).
BXE10498
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Open Center Hydraulics (For MY14 and older S670).
BXE10198
Hydraulic + Electric for PowerCast
2,115.30
Open Center Hydraulics (For MY14 and older S660, S670).
BXE10365
Hydraulic + Electric for PowerCast
2,115.30
Open Center Hydraulics (For MY15 and newer S660, S670).
BXE10211
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Open Center Hydraulics (For MY14 and Older S660, S670).
BXE10193
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Open Center Hydraulics (For MY14 and Older S660, S670).
BXE10369
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10367
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Open Center Hydraulics (For MY15 S650, S660, S670).
BXE10174
PowerCast Tailboard
5,625.40
BXE10179
Standard Deflectors
1,128.60
BXE10176
Standard Vane Manual Tailboard
3,774.10
BH84523
Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread
with Integrated Chaff Spreader
1,942.60
For 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS and
S650, S660, S670, S680, S690. For spread width up to 40 Ft.
27 February 2017 US & Canada
3-COMBINE- 24
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Separating:
BXE10195
HD Grate-Separator Covers (Set of 20)
1,523.50
Only use with HD welded frame separator grates. Used to reduce chaff load and/or alter
distribution of material to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S660, S670,
S680, S690).
BXE10645
Separator Grate Covers (Set of 4)
133.10
Covers included in small grain combines and custom cutter corn machines. Used to reduce
chaff load and/or alter distribution of material to cleaning shoe. Covers should not be installed
during corn harvest. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
Spacers:
BH92258
12 In. (300 mm) Axle Spacer
2,689.50
For S550, S660, and S670.
Requires 1047 mm Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires
require 1352 Length Ladder.
BH92260
16 In. (400 mm) Axle Spacer
2,751.10
For S550, S660, and S670.
For 36 In. and 38 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. For 30 In.
rows with 76X50-32 tire. Requires 1047 mm Ladder Extension. 76X50-32 Requires 1455
Length Ladder, all other tires require 1352 Length Ladder.
BH92262
18 In. (454 mm) Axle Spacer
3,140.50
For S550, S660, and S670.
For 40 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. Requires 1047 mm
Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires require 1352 Length
Ladder.
BH92131
2 In. (50 mm) Wheel Spacer
504.90
For S550, S660, S670, S680, S690 Combines. Requires 330 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92265
4 In. (105 mm) Axle Spacer
2,171.40
For S550, S650, S660, and S670.
For 30 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. 800 mm wide tires
require 330 mm Ladder Extension. 900 mm wide tires require 1047 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92134
4 In. (96 mm) Wheel Spacer
673.20
For S550, S660, S670, S680, S690 Combines. For 30 In. rows with 30.5 In. wide, 800 mm wide
and 900mm wide tires. Requires 330 mm Ladder Extension. Not recommended with 76X50-32.
BXE10141
50 mm Wheel Spacer Assembly - Single Wheel Only
673.20
For S550, S660, S670, S680, S690 Combines.
BH92267
6.5 In. (165 mm) Axle Spacer
2,524.50
For S550, S660, and S670.
Requires 1047 mm Ladder Extension and 1352 mm Length Ladder. Not recommended with the
76X50-32.
BH81747
Parts Assembly - Box of Final Drive Axle Extensions
For S550, S660, S670, S680, S690 Combines. Includes all attaching hardware for axle
spacers.
27 February 2017 US & Canada
3-COMBINE- 25
150.70
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Threshing:
BH84308
Concave Insert Bars for Round Bar Concaves (Set of 2)
955.90
Provides additional threshing in round bar concaves. One set required per concave section.
Use if harvesting small grains with round bar concaves. (9660, 9760, 9860, 9670, 9770, 9870,
S650, S660, S670, S680, S690).
BXE10020
Densepack Threshing Tines for Variable Stream Rotor
908.60
For use with Variable Stream Rotors ONLY (option codes: 4885 and 4886). Additional
threshing tine base weldments for installation into the densepack locations of a variable stream
rotor only. Can be used to improve material handling in some tougher conditions such as rice
and grass seed harvest. Note: May decrease machine performance if used in dry brittle crop
conditions. Note: Wear plate kits (grain vs. rice) must be ordered separately through service
parts. Note: Rice machines from factory already come with these tines installed.
BH84581
Discharge Flights for TriStream Rotors
294.80
For use with TriStream Rotors ONLY (option codes: 4880/4881/4882/4883/4884). Flights for
rear or rotor to aid in material conveyance to discharge beater. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84286
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For 9660 STS, 9760 STS, 9860 STS and MY14 and earlier S650, S660. S670, S680 and S690
combines.
BXE10391
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For MY15 and later S650, S660. S670, S680 and S690 combines.
BH84226
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (9660,
9760, 9860, 9670, 9770, 9870 and MY14 or earlier S660, S650, S670, S680, S690 combines).
BXE10387
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (For MY15
and later S660, S650, S670, S680, S690).
BH84285
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (9660, 9760, 9860, 9670,
9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10389
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (For MY15 and later S650,
S660, S670, S680, S690 combines).
BH84227
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (9660, 9760, 9860, 9670, 9770, 9870 and
MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10390
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (For MY15 and later S650, S660, S670, S680,
S690 combines).
BXE10491
Rice Performance Enhancement Package
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components when used in certain configurations (dependent on crop/conditions) may enhance
separation performance in the combine. Includes instructions on how/when to use bundle
components. (S660, S670, S680, S690) (PIN 775000 -).
27 February 2017 US & Canada
3-COMBINE- 26
3,348.40
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84534
Sectionalized Flat Bar Concave Cover Plates (Set of 3)
577.50
For use in Large Wire and Small Wire Concaves Only. Set of 3 covers with 4 pieces to make
one complete cover. For additional threshing in hard to thresh crops. Can also be used to
change crop distribution to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660,
S670, S680, S690).
BH84535
Sectionalized Round Bar Concave Cover Plates (Set of 3)
108.90
For use with round bar concaves only. Covers used to even distribution of material to cleaning
shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
BH84229
Small Wire Concaves (Set of 3) - Wide Body
2,390.30
Not recommended for corn. Recommended for small grain and very brittle straw. (9660, 9760,
9860, 9670, 9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10388
Small Wire Concaves (Set of 3) - Wide Body
Not recommended for corn. Recommended for small grain and very brittle straw. (For MY15
and later S650, S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 27
2,390.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S670 Combine - HX (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 28
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Equipment for Base Machine
PREMIUM OPERATOR'S CAB:
Pressurized Cab with HVAC ClimaTrak
Premium Storage Package
Premium operators seat
Actively Cooled Refrigeration Unit
Windshield Wiper (2-Blades) with Washer Dual
Tilt-Telescoping Steering Column
Seat with Air Suspension
Training Seat
Driver and Training Seat Belts
Service Lights Beacon lights
Pull-down front sunshade 3-Position Pivoting
Operator's Ladder
Two adjustable heated cab mounted mirrors
Large Cup Holders
Auxiliary Power Outlet Strip
Business Band Radio Pre-wire Basic Radio Package
AM/FM Stereo Radio and CD-Player
Antenna and two speakers
Auxiliary input jack located on front of radio
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Electro-Hydraulic Controlled header and separator
controls
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
CommandCenter color display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold (if
equipped)
Chopper position Video Camera Application (if
equipped)
TouchSet (Automatic Combine Adjustment)
Harvest Monitor AutoTrac Ready Wiring Harness and
Steering Components with Harvest Monitor System
LESS
GreenStar Display JDLink capable
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and Unloading
Auger Engage Controls
Quick-Stop Header/Unloading Auger
Disengage Switch
Draper Variable Belt Speed In-Cab Control
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine RPM
Fuel level and temperature gauge
Deck plate and dial-a-speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active Header float system
Header Height Sensing System
LIGHTING:
Standard lighting package
Overhead work lights (four)
High beam driving lights (two)
Low beam driving lights (two)
Transport and Field Lamps (six)
Grain Tank and Unloading Auger Lamps (two)
Warning and Tail Lamps with Integral Turn Signals
(four)
Rotating beacon lights (three)
SideFinder Lights (two)
Cleaning Shoe Lights
Exit Lighting Rear Residue Discharge Lights (two)
Stubble Lights (two)
Deceleration Warning Light
FEEDERHOUSE:
Heavy-Duty Feederhouse (3060)
17 Degree Fore/Aft Adjustable front tilt frame
Heavy-Duty Reverser with Push Button
Electro-Hydraulic Shift Engagement
Single-Point Electric Hydraulic Hookup and
Latching System
2-Speed Feeder Chain
Stone Trap with Manual Dump
THRESHING AND SEPARATING:
TriStream Rotor Threshing Technology
762 mm Diameter (30 in.) Feeding and threshing
section
838 mm Diameter (33 in.) Separating Section
Total Rotor Length of 3168 mm (124.7 in.)
15 Grain Threshing Elements
Standard Feed Accelerator 10-Wing 420 mm (17 in.)
Diameter with 30 serrated wear strips
Two speed drive: 440/800 rpm (corn/grain)
Separator Drive
210-1000 RPM Dual-Range Posi-Torq
Discharge Beater and Grate
Five wing discharge beater with 10 wear strips
(Tri-Stream)
Cast Finger
Discharge Beater Grate 0.36 sq m total area
Discharge Beater Grate 0.36 sq m total area
Discharge Beater Grate 0.45 sq m total area (rice
package)
Radial Pin Clutch
Three Concave Sections 1.1 sq m total area Round
Bar Concave (corn)
CLEANING:
2-Stage S-Series Cleaning System has:
12 Blades 500 mm Diameter (20 in.)
Dual Discharge Cleaning Fan
Deep Tooth Remote Adjustable Chaffer and Sieve
(corn)
General Purpose Remote Adjustable Chaffer and
Sieve (small grain/rice)
Separator Air Discharge Chute Agitators
GRAIN HANDLING:
400 bu (14,100L) Grain Tank
3.8 (135L) bu per sec (average),
Unloading System with 22.5 ft Unloading Auger
Manual Folding Grain Tank Loading Auger/Extensions
Extended wear grain handling system (rice)
RESIDUE MANAGEMENT:
Wing Blade Wide-Spread, Fine Cut, 2-Speed
Chopper with Integrated Chaff Spreader and
single-point adjustable knife bank
ENGINE:
John Deere 6 Cylinder 6135H (13.5L)
Rated Speed at 2100 rpm
Rated Power "ECE R120"(kw/hp) 353/473
Power [email protected] Speed(kw/hp) 37/50
Rate [email protected](kw/hp) 378/507
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
Peak [email protected](kw/hp) 402/540
PowerTech Plus Diesel Engine Technology with
turbocharger and air-air aftercooler
Electronically Controlled Fuel Injection and fuel
shutoff
200 amp Alternator
330g (1250L)Fuel Tank
Rotary Screen Air Intake with Vacuum Pickup
Automatically Tensioned Poly-V Accessory Drive
Belts
Standard Capacity Engine Pre-Cleaner and air
cleaner filter system
High Capacity Wide Spaced Tube Radiator
Air Scoop Cooling Technology
Export Compliant Power unit. (Export only except
Australia and Mexico)
WHEELS AND DRIVES:
Drive Wheels and Tires
Steering Wheels and Tires
Speed Hydrostatic Ground Drive System
ProDrive Transmission with Harvest Smart Feedrate
Control
Heavy-Duty Final Drive
Adjustable Rear Axle with Heavy-Duty Spindles
HYDRAULICS:
Closed Center Hydraulic System
Proportional Header Height, Reel and spreader
speed control
High Capacity (45 gpm) System and Single Piece
Integral Valve
Assembly
Header Suspension System
Reel Fore/Aft Hydraulics
CODE
202 kW CommandTouch Multi-Speed Drive System Heavy-Duty Tilt Cylinder - 90 mm (3.50 in.) Lift
Cylinders
SERVICEABILITY:
Full Composite Flip-Open Side Shields
Central Lube Charts
Easy Access Lube Banks
Hydraulic Diagnostic Receptacles
Steel Tool Box with Tray
Battery Storage Container to Ground Level Extend Battery Posts and Cut-Off Switch
MISCELLANEOUS:
One 10-lb Type ABC Fire Extinguisher (front
mounted) not included for Russia
One 2.5 gal. Water Fire Extinguisher. Shipped
empty, requires filling at pre-delivery. (rear
mounted) not included for Russia
Independent Hydraulic Brakes Park Brake
Back Up Alarm
Composite Styling with Air Scoop
Advanced Air Intake
CAN-BUS Electronic On-Board Communication
System with Solid State Power Distribution Centers
Temporary Surface Rust/Corrosion Protection
(Export Only)
LESS HEADER EQUIPMENT
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
01LEH
S680 Combine - HX (Model Year 2017)
477,874.00
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
DESTINATION
If additional languages for Operator's Manuals are required, order online from
http://techpubs.deere.com/.
North America
0202
USA
1,309.00
Include Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined
in the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0184
Canada
1,309.00
Includes Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
OPERATOR'S MANUAL
0409
English
In Base Price
0413
French
Same Price
0437
Spanish
Same Price
0430
Portuguese
Same Price
0426
Chinese (sourced from NA)
Same Price
0504
General Purpose Regular Wear Package
VALUE PACKAGES
In Base Price
Includes: Separator Grate Covers. Requires:4882 TriStream Rotor Regular Wear Densepack
Ready, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0505
General Purpose Extended Wear Package
In Configuration
Includes: Separator Grate Covers. Requires: 4883 TriStream Rotor Configuration Extended
Wear Densepack,4832 Dyna-Flo PlusCleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0506
Coarse Grain Package
In Configuration
Requires: 4882 TriStream Rotor Regular Wear Densepack Ready, 4834 Dyna-Flo
PlusCleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with TouchSet. Includes
additional components to optimize grain quality in high moisture corn.
0507
Small Grains Package
In Configuration
Includes: Separator Grate Covers, 848A Small Grain/Rice Cleaning Shoe. Requires: 4885
Variable Stream Rotor Configuration Regular Wear, 4832 Dyna-Flo Plus Cleaning Shoe
General Purpose Chaffer and Sieve with TouchSet.
0518
Small Tough Grains Regular Wear Package
6,692.00
Includes: Active Concave Isolation, Heavy Duty Separator Grates with Interrupter Bars,
Full-Travel Feederhouse Drum, Separator Grate Covers, 848A Small Grain/Rice Cleaning
Shoe. Requires: 4885 Variable Stream Rotor Configuration Regular Wear, 4832 Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0508
Small Tough Grains Extended Wear Package
6,692.00
Includes: Active Concave Isolation, Full-Travel Feederhouse Drum, Heavy Duty Separator
Grates with Interruptor Bars, Separator Grate Covers, 848A Small Grain/Rice Cleaning Shoe.
Requires: 4886 Variable Stream Rotor Configuration Extended Wear, 4832 Dyna-Flo Plus
Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0510
Rice Package
3,735.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines, 848A Small Grains/Rice Cleaning Shoe. Requires:
4886 Rice Extended Wear Variable Stream Rotor Configuration, 4832 Dyna-Flo Plus
Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet, Extended Wear Grain
Handling code 5234.
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
VALUE PACKAGES ...Continued...
0511
Tough Rice Package
6,466.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines, Active Concave Isolation, 848A Small Grains/Rice
Cleaning Shoe. Requires: 4886 Rice Extended WearVariable Stream Rotor Configuration,
4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet,
Extended Wear Grain Handling code 5234. Wear plates must be ordered separately.
0598
Custom Configuration
In Configuration
7015
Final Tier 4 Certified Engine
1121
Premium Cab
ENGINE EMISSION LEVEL SELECTION
In Base Price
OPERATOR'S STATION
In Base Price
Includes Premium Storage Package, Actively Cooled Refrigeration Unit, Dual Tilt Steering
Column with Foot Rests, Electric Adjust Heated mirrors, Enhanced Cab Styling.
RADIO
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
in right hand storage console, two speakers and external antenna. Only available with
Premium Cab 1121.
1413
Premium Radio Package with XM Radio
352.00
For U.S. and Canada Markets only. AM/FM Stereo, Weatherband, Compact Disc Player,
with MP3 file support, Remote Controls, USB port in right hand storage console, Auxiliary
Input Jack located in right hand storage console, Bluetooth capable including microphone,
Integrated Bluetooth Phone Book connection through CommandCenter, Audio-streaming with
compatible Bluetooth devices, XM Satellite capable including Satellite Antenna (Subscription
Required), Two Speakers, Subwoofer, and External Antenna. Volume, Speed Compensation,
bass, and treble radio functions can be viewed and configured on the CommandCenter
Display. Only available with Premium Cab 1121.
SEAT
1221
Enhanced Air Suspension Seat
In Base Price
Cloth operator and instructor seats. Only available with Premium Cab 1121.
1222
Leather Seat Package
2,100.00
Includes all features of the enhanced air suspension seat. In addition, includes leather covered
operator and instructor seat, heated and ventilated operator seat and leather wrapped steering
wheel.
Only available with Premium Cab 1121.
LIGHTING
1360
Standard Lighting
In Base Price
Includes eight cab roof mounted halogen lamps: Four overhead work lights, two high beam
driving lights, and two low beam driving lights.
1370
Standard Lighting and Header Extremity Lights
152.00
Includes standard lights plus two halogen lamps mounted on the lower cab fascia.
1375
LED Lighting Package
3,410.00
Eight cab roof mounted lights: Four overhead LED work lights, two halogen high beam
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
LIGHTING ...Continued...
driving lights, and two halogen low beam driving lights. Only available in Australia and New
Zealand.
1379
Premium LED Lighting Package & Header Extremity Lights
3,562.00
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities. CommandCenter are capable
of running AutoTrac and AutoTrac RowSense only (with appropriate activations purchased
and StarFire Receiver installed). GS3 2630 Displays are capable of all AMS functionality.
Includes Access Manager user lockout software, video capability and armrest bracket. One
video camera input pre-wired in the cab. Connector located on the outside rear of the cab. See
Parts for available cameras.
The GreenStar 3 2630 Display is required for advanced AMS
applications.
When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
additional GreenStar display.
1823
Touchscreen GS3 CommandCenter 7 in. (17.8 cm) Color Display
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
4,635.00
AG MANAGEMENT SOLUTIONS
Accuracy is dependent on the receiver signal level
1803
AutoTrac Ready with Harvest Monitor
For Australia/NewZealand/China: AutoTrac Ready.
moisture and mass flow sensors).
180A
In Base Price
Harvest Monitor Complete (Includes
AutoTrac Complete with Harvest Monitor (SF3) [StarFire 6000 Receiver]
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription [StarFire 6000
Receiver]
12,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and 1 Year
SF3 Subscription
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription [StarFire 6000
Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and RTK
Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
27 February 2017 US & Canada
3-COMBINE- 5
14,895.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
180D
AutoTrac Complete with Harvest Monitor (SF1) [StarFire 6000 Receiver]
7,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation.
Harvest Monitor Complete (Includes moisture and mass flow sensors).
180E
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF3) [StarFire 6000
Receiver]
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
AutoTrac RowSense requires a properly equipped head.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
15,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, 1 Year SF3
Subscription and AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Subscription. Harvest Monitor Complete (includes
moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
AutoTrac RowSense requires a properly equipped head.
180H
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF1) [StarFire 6000
Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
A subscription is required for SF3 accuracy. AutoTrac RowSense requires a properly equipped
head.
CONNECTIVITY
Machine connectivity functions require cellular coverage. Usage of the JDLink System
requires customer's acceptance of the terms of the John Deere Telematics Subscription
Agreement, which describes John Deere's access and use of the data collected by the system.
JDLink customer account must be created to access JDLink Connect data.
Options with
JDLink Connect include: -1 Ethernet harness connecting the MTG to the primary
display/integrated processor, -1 Ethernet harness routed from the MTG to the optional
display port, -Antenna wiring harness for the Machine Communication Radio (MCR), and
the JDLink hardware: integrated cab wiring harness, antenna, Modular Telematics Gateway
(MTG) with Service ADVISOR Remote capability, and JDLink Ultimate Activation.
Subscription length of contract varies; Annual subscription renewal required after term of
27 February 2017 US & Canada
3-COMBINE- 6
10,395.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
service for continued functionality. Option availability limited by specific geographical
regions. Please refer to region specific price pages for appropriate ordering codes.
Use
of this service, and all rights and obligations of John Deere and the Customer (as identified in
the applicable agreement), are governed by the terms and conditions outlined in the
applicable Services and Software agreements available at www.JohnDeere.com/Agreements.
If these terms and conditions are not agreeable do not proceed and do not use the service.
188U
JDLink Hardware only - Subscription Not Included
In Base Price
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
189A
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
188S
JDLink Connect 5 Year subscription
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States, Canada, and Australia through
dealers that meet New Model Qualification requirements.
27 February 2017 US & Canada
3-COMBINE- 7
1,600.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
189B
JDLink Connect 5 Year subscription and Machine Communication Radio
5,299.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
MOBILE APPLICATIONS
1950
Less Harvest Mobile
-500.00
Not available in United States, Canada, Australia, and New Zealand.
1951
Harvest Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
separately from StellarSupport/JD Marketplace. Only available in United States, Canada,
Australia, and New Zealand.
1953
Wireless Data Server (WDS) with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality. Only available in United States, Canada, Australia, and New Zealand.
MACHINE AUTOMATION
1959
In Base Features: Interactive Combine Adjustment, Touch Set, VisionTrak, Harvest Smart,
and Engine Speed Management
In Base Price
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
1961
In Base Features PLUS Active Terrain Adjustment
3,020.00
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
FEEDERHOUSE TILT SELECTION
Level Land Feederhouse - Fixed Speed with Reverser
3031
110kW High Torque Fixed Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
-24,854.00
For use with Rigid Auger Platforms 30 Ft. and less.
Rigid Draper Platforms 35 Ft. and less
Belt Pickup Platforms.
Lateral Tilt Feederhouse - Fixed Speed with Reverser
3056
110kW Heavy Duty Tilt Cylinder, High Torque Fixed Speed Drive System - 3.15 In. (80 mm)
Lift Cylinders
For use with Rigid and Flex Auger Platforms 35 Ft. and less.
Rigid and Flex Draper Platforms 40 Ft. and less.
Belt Pickup Platforms.
27 February 2017 US & Canada
3-COMBINE- 8
-18,000.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TILT SELECTION ...Continued...
3055
110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders
w/ Fore Aft Tilt
-15,155.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 40 ft or less, Rigid and Flex Auger Platforms 35 ft less,
Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro handle).
3064
110kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.50 In. (90 mm) Lift Cylinders
w/ Fore Aft Tilt
-14,039.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 45 Ft. or less. Rigid and Flex Auger Platforms 35 Ft. or
less. Belt Pickup Platforms. Includes Code 8141 (Advanced Hydro handle).
Lateral Tilt Feederhouse - Variable Speed with Reverser
3060
202 kW CommandTouch Multi-Speed Drive System - Heavy-duty Tilt Cylinder - 3.50 In.
(90 mm) Lift Cylinders
-2,845.00
For use with StalkMaster Corn Heads 18-rows and less. Rigid and Flex Auger Platforms 35
ft and less. Rigid and Flex Draper Platforms 40 ft and less. Belt Pickup Platforms.
Requires ProDrive.
3063
202kw CommandTouch Multi-Speed Drive System, Dual-tilt Cylinders - 3.50 In. (90 mm) Lift
Cylinders w/ Fore Aft Tilt
In Base Price
With Hydraulic Feederhouse Platform Tilt (Fore Aft).
For use with StalkMaster Corn Heads 18-rows or less, Rigid and Flex Auger Platforms 35 ft
or less, Rigid and Flex Draper Platforms 45 ft or less, Belt Pickup Platforms.
Includes
Code 8141 (Advanced Hydro handle).
ROTOR TYPE
Wear type will include separator and concaves.
4882
TriStream Rotor Configuration Regular Wear (Densepack Ready)
In Base Price
Recommended for Corn, Soybeans, and General Purpose Grains.
4883
TriStream Rotor Configuration Extended Wear (Densepack Ready)
1,954.00
Recommended for Corn, Soybeans, and General Purpose Grains.
4884
Custom Cutter's Extended Wear Separation and Concave Package
7,604.00
Includes: Extended Wear (Thick Skin) Tri- Stream Rotor, Extended Wear Threshing Elements,
Separator Tines and Rotor Top Covers. Also includes: 20 Separator Grate Covers and
Extended Wear Round Bar Concaves for field installation. Requires Code 4832 (Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet) and Code 4300
(Factory Installed Small Wire Concave).
4885
Variable Stream Rotor Configuration Regular Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
4886
1,887.00
Includes:
Variable Stream Rotor Configuration Extended Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
3,522.00
Includes:
CHAFFER AND SIEVE
4832
Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with
TouchSet (Electric Shoe Adjust)
In Base Price
Includes 9486: Separator Grate Covers (set of 20)
4834
Dyna-Flo Plus Cleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with
27 February 2017 US & Canada
3-COMBINE- 9
Same Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
TouchSet (Electric Shoe Adjust)
Not recommended for use in food corn, popcorn or small grains. Includes additional
components to optimize grain quality in high moisture corn.
CONCAVES AND THRESHING
Wear type of factory installed concaves is determined by wear type of rotor selection. For
specific recommended crop applications for each of the three type Concaves offered, refer to
Agricultural Sales Manual.
4340
Round Bar Concave
In Base Price
4300
Small Wire Concave
448.00
4390
Extended Wear Small Grain Combination Concave
1,888.00
Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and
25-wire mid and rear Concaves). Only available in Australia and New Zealand.
4302
Large Wire Concave
323.00
5232
Regular Wear Grain Handling System
5234
Extended Wear Grain Handling System
GRAIN HANDLING WEAR PACKAGE
In Base Price
4,206.00
Includes: Extended Wear, Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank
Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy Duty Grain Tank
Cross Auger, and Vertical Unloading Auger.
GRAIN TANK EXTENSIONS AND COVERS
5371
Manual Grain Tank Extensions, LESS Covers
5373
Power Folding Grain Tank Covers
5424
22.5 Ft. (6.9M) 1-Piece Unloading Auger
In Base Price
5,273.00
UNLOADING AUGER
In Base Price
Not available for Export.
5425
22.5 Ft. (6.9M) Power Folding Unloading Auger
5,875.00
5426
22.5 Ft. (6.9M) 2-Piece Unloading Auger
1,196.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5427
22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger
515.00
Not available for export.
5428
26 Ft. (7.9M) Unloading Auger
2,394.00
Not available for export. Recommended for Platforms up to 40 Ft. and Corn Heads up to
16-rows 30 In.
5429
26 Ft. (7.9M) Unloading Auger
3,589.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5431
26 Ft. (7.9M) Power Folding Unloading Auger
27 February 2017 US & Canada
3-COMBINE- 10
8,269.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
UNLOADING AUGER ...Continued...
5432
28.5 Ft. (8.7M) Unloading Auger
4,103.00
Not available for Export.
5433
28.5 Ft. (8.7M) Unloading Auger
5,300.00
Export Only. No homologation, auger comes uninstalled and requires dealer installation.
RUST PROTECTION
5600
Rust Protection for Transit
298.00
Required for protection of combine from road salt during transportation from factory during
winter months and for Export. Required for Export.
5601
LESS Rust Protection for Transit
In Base Price
Not available for Export.
RESIDUE DISPOSAL
Deluxe Residue
Includes: Fine Cut Chopper - 2-Speed Chopper drive with Neutral, Integrated Chaff Spreader.
5752
Deluxe Residue - Manual Adjust Vane Tailboard
In Base Price
Recommended for Platforms 30 ft and less.
5756
Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind
compensation
7,008.00
Recommended for platforms 30 ft to 50 ft
Premium Residue
Includes: 2-Speed Chopper with Neutral - Drop straw/spread chaff, Chop/spread straw and
chaff, Integrated Chaff Spreader.
5758
Premium Residue - In-cab operator controlled Advanced PowerCast powered tailboard with
wind compensation
8,999.00
Recommended for Platforms 30 Ft. and greater. Not recommended if a majority of your
harvested crop is corn. If used in corn, it is recommended to install KXE10135 and
KXE10147.
With Fine Cut Chopper
Straw Spreaders
5722
Twin Disc Straw Spreader with Integrated Chaff Spreader and Variable Speed Control
-6,557.00
Recommended for Platforms 30 ft or greater.
5724
Wide Spread Twin Disc Straw Spreader with Integrated Chaff Spreader, Barrier Hoops,
In-cab Independent Disk Speed
-4,791.00
Recommended for Platforms 30 ft to 40 ft.
TRANSMISSION
2020
ProDrive Transmission with Harvest Smart Feedrate Control
Requires Premium Cab (code 1122).
27 February 2017 US & Canada
3-COMBINE- 11
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6753
IF800/70R38 R1W 187A8 CFO
384.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC, 612FC
StalkMaster, 616C,616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire option 6634, 6640, 6646, 6678, 6664, or 6674.
Available in Michelin (for all markets) or Firestone (not available in China).
6734
650/85R38 R1W Duals 173A8
11,798.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 618F, 622F, 625F, 630F, 635F, 625D, 635D, 630D, 640D, 630FD, 635FD,
640FD, 645FD, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, 616C
StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6640, 6646, 6674, 6678, 6664, or 6676.
Available in Firestone, Goodyear, or Michelin.
6751
520/85R42 R2 Duals (Firestone or Goodyear)
6,131.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, and 618C.
Firestone brand is 165A8 and Goodyear brand is 162A8. Available with steering tire options
6634, 6646, 6678, 6664 or 6676.
6747
IF1250/50R32 CFO R1W 201B (Firestone Only)
14,370.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612FC. 612FC
StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6674, 6678, 6664, or 6676. This tire is allowed
with 300mm, 400mm, 454mm axle spacers only.
6756
580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
8,446.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6678, 6664, or 6676.
6759
IF900/60R32 CFO R1 182A8 (Firestone only)
In Base Price
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 630FD, 635FD, 612C, 616C, and 618C.
Available with steering tire options 6634, 6678, 6664, or 6646.
6762
IF520/85R42 CFO R1W 169B Duals (Goodyear or Firestone)
12,954.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
645FD, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, 616C StalkMaster, 618C,
and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6678, 6664, or 6676.
6764
VF520/85R42 CFO R1W 177A8 Duals (Michelin)
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
27 February 2017 US & Canada
3-COMBINE- 12
18,864.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
612FC StalkMaster, 616C, 616C StalkMaster, 618C and 618C StalkMaster.
Available with steering tire options 6640 or 6674.
6766
IF900/65R32 CFO R2 191A8 (Goodyear)
2,720.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634 or 6676.
6769
LSW1250/35R46 195D R2 (Goodyear)
23,170.00
Available with steering tire options 6634, 6676, and 6643. For use with the following front end
equipment only: 625R, 630R, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD,
640FD, 645FD, 612C, 612FC. 612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C
StalkMaster.
6780
LSW1100/45R46 195D R1W (Goodyear)
10,134.00
Available with steering tire options 6634, 6676, and 6643. For use with the following front end
equipment only: 615P, 625R, 630R, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD,
635FD, 640FD, 645FD, 612C, 612FC. 612FC StalkMaster, 616C, 616C StalkMaster, 618C,
and 618C StalkMaster.
6755
Tracks Complete Combine with 36 in. Ag. Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive (in base
equipment), 12 In. (300mm) axle extensions, dual (1047mm) ladder landing extension, and
short (1352mm) ladder. Available with steering tire options 6620, 6634, 6640, 6646, 6664,
6674, 6678, 6676. Available in the United States and Canada.
6760
Tracks Complete Combine with 36 in. Rice Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive (in
base equipment), 12 In. (300mm) axle extensions, dual (1047mm) ladder landing extension,
and short (1352mm) ladder. Available with steering tire options 6620, 6634, 6640, 6646, 6664,
6674, 6678, 6676. Available in the United States and Canada.
6700
LESS Drive Wheels and Tires
-6,136.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6702
LESS Drive Wheels and Tires
-5,946.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6703
LESS Drive Wheels and Tires
-6,116.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6704
LESS Drive Wheels and Tires
-6,026.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1455 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6705
LESS Drive Wheels and Tires
-5,926.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6706
LESS Drive Wheels and Tires
-5,636.00
Includes 1047 mm extension, ladder pivot module, and ISO 1352 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6707
LESS Drive Wheels and Tires
Includes 1047 mm extension, ladder pivot module, and ISO 1455 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
27 February 2017 US & Canada
3-COMBINE- 13
-3,594.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
6708
LESS Drive Wheels and Tires
-5,446.00
Includes 1047 mm extension, ladder pivot module, and ISO 1554 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
STEERING WHEELS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6634
750/65R26 (Goodyear or Firestone)
1,829.00
Goodyear is a 750/65R26 R1W 166A8 and Firestone is 750/65R26 R1W 169A8.
6640
VF620/70R26 CFO 173A8 TL CEREXBIB (Michelin Only) - 3.49m width
1,898.00
6643
LSW IF710/60R30 CFO R1W 177D (Goodyear only)
2,236.00
6646
VF750/65R26 R1W 177B (Firestone Only)
3,198.00
6664
VF620/75R26 R1W 172B (Firestone)
3,000.00
6674
VF750/65R26 CFO R1W 177A8 (MICHELIN)
4,598.00
6676
VF710/65R26 R2 177D (Goodyear)
4,798.00
6678
620/75R26 R1W 166A8 (Goodyear)
In Base Price
6600
LESS Steering Wheels and Tires
-4,688.00
Not available for Export. For use with 28L-26 In. only. Includes Axle Stops. Not available
with LSW tires 6769 and 6780.
6602
LESS Steering Wheels and Tires
-4,708.00
Not available for Export. For use with all Steering Tires EXCEPT 28L-26 in.
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
2220
2-Wheel Drive
In Base Price
2240
Powered Rear Axle, 2-Speed 4-Wheel Drive
8700
Engine Coolant Heater - 110 Volt (Not available for Export)
8701
Engine Coolant Heater - 220 Volt (Export Only)
106.00
8709
Fuel Pre-Filter/Water Separator
589.00
23,824.00
ENGINE
In place of Base Equipment Filter/Water Separator.
Recommended where fuel quality is a concern.
27 February 2017 US & Canada
3-COMBINE- 14
68.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ENGINE ...Continued...
8649
Factory Installed Air Compressor
3,065.00
Includes two hoses and two air wands that can be stored on the machine. Includes two
connection points on the combine: one located at ground level above the left rear tire and one
located on the engine deck. Not available in China.
OPERATOR'S STATION
8141
Advanced Hydrohandle
158.00
Included with 3055, 3061, 3062, 3064 and 3063 (Hydraulic Feederhouse Platform Tilt (Fore
Aft)). Also required with 18BJ and 18CJ (JDLink Connect/Machine Communication Radio).
Enables 600D Header Platform Tilt Operation, integrated in the hydrohandle functions.
CAMERA OBSERVATION SYSTEM
8145
Camera Ready
338.00
Cameras are not included. Includes harnesses and brackets factory installed at the unloading
auger to enable view of auger boot location over the grain cart when unloading auger is
swung out, at grain tank covers to enable grain tank visibility and beneath the rear beacon
light to enable rear view.
Requires 2630 Display on corner post or CommandArm for use.
FEEDERHOUSE TYPE
8315
Feed Accelerator Slow Speed Drive
475.00
320-770 RPM. Recommended only for use in edible beans, food corn, or popcorn when
optimum grain quality is desired in these crops. Not recommended for Rice. Not available with
4885 or 4886. Not available with code 9315.
FAST (FEED ACCELERATOR AND STONE TRAP)
9315
Feed Accelerator Slow Speed Drive
1,752.00
320-770 RPM. Recommended for use in edible beans, food corn, and popcorn. Certain
conditions may see a straw quality improvement with slower accelerator speeds, but material
handling may be sacrificed when in tougher conditions. Not recommended for use in
Rice. Available on both the TriStream and Variable Stream Rotor. For Zweibrucken-built
machines, only available for Australia and New Zealand. Not available with Feed Accelerator
Slow Speed Drive (code 8315).
9317
Feed Accelerator Smooth Wear Strips (Set of 30)
348.00
Recommended for improved grain quality in crops such as food corn and seed crops.
The smooth wear strips on the feed accelerator are only compatible with the TriStream rotor
FAST system.
FEEDERHOUSE TYPE
9300
Feederhouse Drive Oil Cooler
459.00
Recommended for use with chopping Corn Heads. For combines (PIN 700801 and Up). Comes
in base machine when a Multi-Speed or Heavy Duty High Torque Variable Speed Drive
Feederhouse are ordered.
9311
Enhanced Front End Equipment Single Point Latching
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900 Series Platforms with Single Point Latching System.
Please refer to Ag Sales Manual for other compatibility information.
27 February 2017 US & Canada
3-COMBINE- 15
122.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TYPE ...Continued...
9312
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
9314
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
SEPARATION
8499
Heavy Duty Separator Grates
3,735.00
Available only with Variable Stream Rotor. Includes Interruptor Bars.
Included with 0511, 0510, 0508, 0518.
CONCAVES
8497
Active Concave Isolation
2,731.00
Available with TriStream Rotor Configuration Regular Wear (code 4880), TriStream Rotor
Configuration Regular Wear (Densepack Ready) (code 4882), TriStream Rotor Configuration
Extended Wear (Densepack Ready) (code 4883), or Custom Cutter's Extended Wear
Separation and Concave Package (code 4884). Not available with Small Tough Grains
Extended Wear Package (code 0508), Rice Package (code 0511), or Small Tough Grains
Regular Wear Package (code 0518). Includes Heavy Duty Feederhouse Slip Clutch
(1300/1500 N-m).
CHAFFER AND SIEVE
8220
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
-1,565.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and Dual Landing Extension and related
parts.Reference DTAC Solution 61907 for information needed for proper wheel and tire
equipment in a SideHill application. Not for export.
8221
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and related parts. Reference DTAC Solution
61907 for information needed for proper wheel and tire equipment in a SideHill application.
Not for export.
8480
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
27 February 2017 US & Canada
3-COMBINE- 16
-1,565.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
8481
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
848A
Small Grain/Rice Cleaning Shoe
Same Price
Recommended only on machines that will be used almost exclusively in small grains. Should
not be used if machine spends time in coarse grain. Shoe is optimized for small grain
performance; front chaffer extension is removed; small grain windboard included. Not
compatible with 0506 Coarse Grain Package. Included with respective crop packages (code
0507, 0508, 0510, 0511, 0518). Only available on S680 and S690 models.
CONCAVES AND THRESHING
9404
Densepack Threshing Tines for Variable Stream Rotor
826.00
Only available with Rotor Option Codes 4885 and 4886. Additional threshing tine base
weldments for installation into the densepack locations of a Variable Stream Rotor only. Can
be used to improve material handling in some tougher conditions such as rice and grass seed
harvest. May decrease machine performance if used in dry brittle crop conditions.
Wear plate kits KXE10049 (rice wear plates), KXE10048 (grain wear plates) must be ordered
separately.
Rice machines from factory already come with these tines installed.
9433
Sectionalized Concave Cover Plates for Large Wire and Small Wire Concaves only
1,132.00
For additional threshing in hard to thresh crops.
9437
Additional Threshing Concave Insert Bars for Round
Bar Concaves (set of two)
869.00
One set required per concave section. Use if harvesting small grains with Round Bar
Concaves.
9425
Extended Wear (Heat-Treated) Round Bar Concaves (set of three)
3,472.00
Best for corn and soybeans.
Not recommended for rice, canola, grass seed.
Use in high yielding or abrasive conditions.
9426
Small Wire Concaves (set of three)
3,703.00
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, rice, sunflowers.
9427
Large Wire Concaves (set of three)
3,564.00
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
9435
Sectionalized Concave Cover Plates (set of three) Round Bar Concaves only
223.00
This cover assembly is used for additional threshing in hard to thresh crops and to even out
the distribution of crop to the cleaning shoe.
9428
Extended Wear Small Wire Concaves (set of three)
5,288.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, sunflowers.
9429
Extended Wear Large Wire Concaves (set of three)
Recommended for high yielding crops or abrasive crop conditions (such as rice).
27 February 2017 US & Canada
3-COMBINE- 17
4,927.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
SEPARATION
9486
Separator Grate Covers (set of 20)
1,174.00
Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In base
equipment for Small Grain combines. Includes five sets of four covers (20 total).
9403
Rice Performance Enhancement Package
2,495.00
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components that when used in certain configurations (dependent on crop/conditions) may
enhance the separation performance of the combine. Includes instructions on how/when to
use bundle components. Only available with 0510 and 0511
CHAFFER AND SIEVE
9482
SideHill Performance Package
829.00
Recommended for sidehill conditions to reduce grain loss. Includes full-length tall chaffer
dividers, grain return pan partitions and grain agitator paddles.
9497
Adjustable Front Chaffer Louvers (Set of 4)
765.00
Recommended for crops with dense green stalks.
GRAIN HANDLING
8525
Clean Grain Auger and Fan Bottom Protection Shielding
295.00
9510
Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough
337.00
9522
Additional "Full" Grain Tank Sensor
208.00
GRAIN HANDLING
For sidehill applications. Already in base equipment on HillMaster machines.
TIRE BRAND PREFERENCE
Tire brand preference choice is for both front and rear tires.
by front drive tire preference choice.
9660
Rear tire brand is determined
No Brand Preference
No Charge
Required if only one brand of drive tire is listed. Not available in China.
9661
Firestone Brand Preferred
800.00
This Code is not required if Firestone is the only brand listed for drive tire. Use Code 9660.
9662
Goodyear Brand Preferred
800.00
This Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9660.
Not available in China.
9663
Michelin Brand Preferred
This Code is not required if Michelin is the only brand listed for drive tire. Use Code 9660.
27 February 2017 US & Canada
3-COMBINE- 18
1,200.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS
All spacers, except Code 9669, include required Ladder Extension. Please refer to the S-Series
tire spacing chart on Ag Sales Manual.
9668
2 In. (50mm) Wheel Spacer
406.00
Not available with Codes 9669, 9220, 9221, 9222, 9223, and 9224.
9669
4 In. (96 mm) Wheel Spacer (no Ladder Extension)
749.00
Not available with Codes 9668, 9220, 9221, 9222, 9223, and 9224.
9220
4 In. (105 mm) Axle Spacer
2,419.00
For increased mud clearance. Not available with dual tire codes 6734, 6746, 6751, 6756.
9221
6.5 In. (165mm) Axle Spacer
3,699.00
Not available with dual tire codes 6734, 6746,6751, 6756. May only choose one of: 9220,
9221, 9222, or 9224.
9222
12 In. (300 mm) Axle Spacer
3,788.00
Not available with dual tire codes 6734, 6746,6751, 6756.
9223
16 In. (400 mm) Axle Spacer
3,852.00
9224
18 In. (454 mm) Axle Spacer
4,133.00
Not available with dual tire codes 6734, 6746,6751, 6756.
HITCHES
8640
Semi-Automatic Rear Hitch with Wiring Harness, allows a single operator to connect trailer
to combine
1,022.00
Export Only. Rated 4500 kg.
8641
Manual Rear Hitch with Wiring Harness for Towing Header Trailer
757.00
Export Only. Rated 4500 kg.
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BXE10752
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S680 and S690 combines.
BXE10717
4WD Conversion Bundle - S680, S690
28,262.30
For S680 and S690: Model Year 2012-Model Year 2015 machines.
Cab and Controls:
BXE10669
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900D and 900 Series Platfroms with Single Point
Latching System.
Please refer to Ag Sales Manual for other compatibility information.
BXE10670
Enhanced Front End Equipment Single Point Latching
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
27 February 2017 US & Canada
3-COMBINE- 19
134.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10697
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
BL15013
Smoker Option
60.45
For S550, S650, S660, S670, S680, S690 Combines. Replaces accessory power connector with
an ashtray and lighter.
KXE10433
Three Camera Bundle
1,403.77
Includes three Motec cameras (AXE41697) to be used in conjunction with factory installed
Camera Ready bundle code 8145. Cameras can be mounted to show views from the rear of the
machine, from the unloading auger, and the grain tank area of the combine. For use with
Model Year 2017 and newer machines.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
Cleaning:
AXE47285
10 mm Fixed Round Hole Sieve
2,202.18
S-series cleaning shoe: S660-S690. Available on MY16 and newer (PIN 785000 -).
AXE47286
3 mm Fixed Round Hole Sieve
2,097.31
S-series cleaning shoe: S650-S690. Available on MY16 and newer (PIN 785000 -).
BXE10729
Active Terrain Adjustment Conversion Bundle
3,654.20
Available on MY16 machines and newer (PIN 785000 -) ordered without the factory installed
Active Terrain Adjustment option.
BXE10692
Adjustable Front Chaffer Louvers
946.84
Recommended for crops with dense green stalks. Available for S650, S660, S670, S680, and
S690 MY16 and newer (PIN 785000 -).
BXE10475
Class 6/7 Side Hill Bundle
1,060.94
S650, S660, and S670. Also needed on S680 and S690 combines that are not equipped with an
extended front chaffer. Available on MY16 and newer (PIN 785000 -).
BXE10476
Class 8/9 Side Hill Bundle
S680 and S690. Available on MY16 and newer (PIN 785000 -).
27 February 2017 US & Canada
3-COMBINE- 20
576.18
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
AXE47216
General Purpose Chaffer
1,569.90
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Sieve for MY16 and newer (PIN 785000 -).
AXE47218
General Purpose Sieve
1,356.84
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Chaffer for MY16 and newer (PIN 785000 -).
Engine:
SWDEF110VKIT 110V Pump Kit
858.57
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF12VKIT
12V Pump Kit
852.86
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF025
2.5 gal jug of John Deere Diesel Exhaust Fluid
0.00
11.75 x 9.5 x 7.6"; 25lbs. Full.
SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lid
1,680.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 36"W x 18"D x 22"H.
SWDEF275
275gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 45.75"; 2750lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF330
330gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 53.15"; 3141lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF055
55gal drum of John Deere Diesel Exhaust Fluid
0.00
Does not include drop tube/valve; 23.5 x 35"; 550lbs. Full.
SWDEFPDU60T 60gal Portable Dispensing Unit with lockable, hinged lid
1,864.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 45"W x 24"D x 30"H.
BXE10700
Air Compressor Conversion Kit
3,708.10
For S680, S690 Combines equipped with Final Tier 4 Engines.
BXE10701
Air Compressor Conversion Kit
3,708.10
For S680, S690 Combines equipped with Tier 2 Engines.
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
FAST (Feed Accelerator and Stone Trap):
BH84027
Contoured Serrated Feed Accelerator Wings
Provides fast yet gentler handling than the standard serrated wear strips. Recommended when
harvesting viney crops such as edible beans. Not for use in Rice. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
27 February 2017 US & Canada
3-COMBINE- 21
1,123.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84496
Expanded Stone Trap Door - Wide Body
1,573.00
Two-piece feed floor for improved rock protection. May reduce capacity in tough green
stemmed crops. (9660, 9760, 9860 PIN 720101 and Above.) (9670, 9770, 9870, S650, S660,
S670, S680, S690).
BXE10741
Feed Accelerator Slow Speed Drive
1,952.99
Available for S650, S660, S670, S680 and S690 MY16 and newer (PIN 785000-). 320-770
RPM. Recommended for use in edible beans, food corn or popcorn when optimum grain
quality is desired in these crops. Not recommended for use in Rice. Not recommended with the
Variable Stream rotor.
BH81489
Feed Accelerator Smooth Wear Strips (Set of 30)
372.90
For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops such
as popcorn, food corn, etc. Not for use in Rice. Conversion to standard corn/grain FAST
required if machine equipped with tough crop or tine fast (9660, 9760, 9860, 9670, 9770,
9870, S650,S660, S670, S680, S690).
BH84447
High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversion for combines
equipped with the Heavy Duty Posi-Torq Variable Speed Drive System
7,641.70
Recommended for use with chopping corn heads 8 Rows and larger, or high yielding green
stem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS, 9670
STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS, S660, S670, S680, S690 combines.
BH84582
Spike Feed Accelerator
4,699.20
For use in tough material handling rice conditions where rice is down and tangled. Not for use
with stripper headers. Not for use in corn/grain harvest. (9660, 9760, 9860, 9670, 9770, 9870,
S660, S670, S680, S690).
BH84416
Tine Feed Accelerator
4,453.90
For use in tough material handling rice conditions where slug. Note: Rice machines from
factory come with tine ffed accelerator installed. (9660, 9760, 9860, 9670, 9770, 9870, S660,
S670, S680, S690).
Grain Handling:
BH92171
BXE10151
400 Bushel Manual Grain Tank Extensions
Active Tailings Perforated Boot Door
1,494.90
218.90
Used on S680 or S690 only. Use in conjunction with either BXE10094 (S680) or BXE10096
(S690).
BXE10270
Additional "Full" Grain Tank Sensor
228.80
For S550, S650, S660, S670, S680, S690 Combines.
BXE10094
BXE10143
Door, Regular Duty, Perforated - S660, S670, S680
256.30
Slow Speed Clean Grain Elevator Drive (Machines with Active Tailings: S680/S690)
575.30
Only available for MY2012 through MY2015 machines.
Reduces speed of Clean Grain Elevator from 400 RPM to 250 RPM. Recommended for edible
beans or soybeans only. Not recommended for crops in excess of 50 bushel/acre yield. Refer to
the Agricultural Sales Manual for additional ordering information and GreenStar limitations.
H229907
Steel Paddle Tailing Elevator for all 9770 STS, 9870 STS, S670, S680 and S690 Combines
20.19
Does not apply to S690 HillMaster.
Ladder Extensions:
BXE10121
230 mm Bolt-on Single Tire Platform
For S550, S660, S670, S680, S690 Combines. Includes 230 mm bolt-on platform and rail post.
27 February 2017 US & Canada
3-COMBINE- 22
512.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10122
330 mm Bolt-on Single Tire Platform
537.90
For S550, S660, S670, S680, S690 Combines. Includes 330 mm bolt-on platform and rail post.
BXE10120
Dual Tire Extension
1,590.60
For S550, S660, S670, S680, S690 Combines. Includes: Dual extension and applicable
mounting, hardware, extension handrails, and chains. (Serial Number 764999).
BXE10124
Long Length Ladder
1,940.40
For S550, S660, S670, S680, S690 Combines. Includes: 1554 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10420
Long Length Ladder
1,940.40
(Serial Number 765000-).
BXE10123
Medium Length Ladder
1,812.80
For S550, S660, S670, S680, S690 Combines. Includes: 1455 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10421
Medium Length Ladder
1,812.80
(Serial Number 765000-).
BXE10156
Short Length Ladder
1,688.50
For S550, S660, S670, S680, S690 Combines. Includes: 1352 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10422
Short Length Ladder
1,285.90
(Serial Number 765000-).
Residue Disposal:
KXE10135
BXE10158
APC Corn Kit
490.78
Advanced PowerCast Tailboard
7,227.00
For MY14 and Older S670, S680, S690 Combines.
BXE10354
Advanced PowerCast Tailboard
7,227.00
For MY15 and Newer S670, S680, S690 Combines.
BXE10178
Chopper Drive Shielding
497.20
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10357
Chopper Drive Shielding
497.20
For MY15 and Newer S660, S670, S680, S690 Combines.
KXE10147
Corn Kit OSB Cover
519.32
KXE10121
Deflector - PowerCast Tailboard
143.61
KXE10148
Distribution Kit - Standard Flex Residue
277.85
BXE10184
Fine Cut Chopper Drive Bundle
2,603.70
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10361
Fine Cut Chopper Drive Bundle
2,603.70
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10172
Fine Cut Chopper with Standard VTB Outlet
For MY14 and Older S660, S670, S680, S690 Combines.
27 February 2017 US & Canada
3-COMBINE- 23
11,180.40
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10355
Fine Cut Chopper with Standard VTB Outlet
11,180.40
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10181
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10358
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10362
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10497
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Closed Center Hydraulics (For MY14 and Older S680, S690).
BXE10191
Hydraulic + Electric for PowerCast
2,115.30
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10364
Hydraulic + Electric for PowerCast
2,115.30
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10210
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10212
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10368
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10366
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10174
PowerCast Tailboard
5,625.40
BXE10179
Standard Deflectors
1,128.60
BXE10176
Standard Vane Manual Tailboard
3,774.10
BH84523
Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread
with Integrated Chaff Spreader
1,942.60
For 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS and
S650, S660, S670, S680, S690. For spread width up to 40 Ft.
Separating:
BXE10195
HD Grate-Separator Covers (Set of 20)
1,523.50
Only use with HD welded frame separator grates. Used to reduce chaff load and/or alter
distribution of material to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S660, S670,
S680, S690).
BXE10645
Separator Grate Covers (Set of 4)
Covers included in small grain combines and custom cutter corn machines. Used to reduce
chaff load and/or alter distribution of material to cleaning shoe. Covers should not be installed
during corn harvest. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
27 February 2017 US & Canada
3-COMBINE- 24
133.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Spacers:
BH92259
12 In. (300 mm) Axle Spacer
2,743.40
For S680 and S690.
Requires 1047 mm Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires
require 1352 Length Ladder.
BH92261
16 In. (400 mm) Axle Spacer
2,844.60
For S680 and S690.
For 36 In. and 38 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. For 30 In.
rows with 76X50-32 tire. Requires 1047 mm Ladder Extension. 76X50-32 Requires 1455
Length Ladder, all other tires require 1352 Length Ladder.
BH92263
18 In. (454 mm) Axle Spacer
3,179.00
For S680 and S690.
For 40 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. Requires 1047 mm
Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires require 1352 Length
Ladder.
BH92131
2 In. (50 mm) Wheel Spacer
504.90
For S550, S660, S670, S680, S690 Combines. Requires 330 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92266
4 In. (105 mm) Axle Spacer
2,228.60
For S680 and S690.
For 30 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. 800 mm wide tires
require 330 mm Ladder Extension. 900 mm wide tires require 1047 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92134
4 In. (96 mm) Wheel Spacer
673.20
For S550, S660, S670, S680, S690 Combines. For 30 In. rows with 30.5 In. wide, 800 mm wide
and 900mm wide tires. Requires 330 mm Ladder Extension. Not recommended with 76X50-32.
BXE10141
50 mm Wheel Spacer Assembly - Single Wheel Only
673.20
For S550, S660, S670, S680, S690 Combines.
BH92268
6.5 In. (165 mm) Axle Spacer
2,565.20
For S680 and S690.
Requires 1047 mm Ladder Extension and 1352 mm Length Ladder. Not recommended with the
76X50-32.
BH81747
Parts Assembly - Box of Final Drive Axle Extensions
150.70
For S550, S660, S670, S680, S690 Combines. Includes all attaching hardware for axle
spacers.
Threshing:
BH84308
Concave Insert Bars for Round Bar Concaves (Set of 2)
955.90
Provides additional threshing in round bar concaves. One set required per concave section.
Use if harvesting small grains with round bar concaves. (9660, 9760, 9860, 9670, 9770, 9870,
S650, S660, S670, S680, S690).
BXE10020
Densepack Threshing Tines for Variable Stream Rotor
For use with Variable Stream Rotors ONLY (option codes: 4885 and 4886). Additional
threshing tine base weldments for installation into the densepack locations of a variable stream
rotor only. Can be used to improve material handling in some tougher conditions such as rice
and grass seed harvest. Note: May decrease machine performance if used in dry brittle crop
conditions. Note: Wear plate kits (grain vs. rice) must be ordered separately through service
parts. Note: Rice machines from factory already come with these tines installed.
27 February 2017 US & Canada
3-COMBINE- 25
908.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S680 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84581
Discharge Flights for TriStream Rotors
294.80
For use with TriStream Rotors ONLY (option codes: 4880/4881/4882/4883/4884). Flights for
rear or rotor to aid in material conveyance to discharge beater. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84286
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For 9660 STS, 9760 STS, 9860 STS and MY14 and earlier S650, S660. S670, S680 and S690
combines.
BXE10391
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For MY15 and later S650, S660. S670, S680 and S690 combines.
BH84226
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (9660,
9760, 9860, 9670, 9770, 9870 and MY14 or earlier S660, S650, S670, S680, S690 combines).
BXE10387
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (For MY15
and later S660, S650, S670, S680, S690).
BH84285
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (9660, 9760, 9860, 9670,
9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10389
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (For MY15 and later S650,
S660, S670, S680, S690 combines).
BH84227
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (9660, 9760, 9860, 9670, 9770, 9870 and
MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10390
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (For MY15 and later S650, S660, S670, S680,
S690 combines).
BXE10491
Rice Performance Enhancement Package
3,348.40
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components when used in certain configurations (dependent on crop/conditions) may enhance
separation performance in the combine. Includes instructions on how/when to use bundle
components. (S660, S670, S680, S690) (PIN 775000 -).
BH84534
Sectionalized Flat Bar Concave Cover Plates (Set of 3)
577.50
For use in Large Wire and Small Wire Concaves Only. Set of 3 covers with 4 pieces to make
one complete cover. For additional threshing in hard to thresh crops. Can also be used to
change crop distribution to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660,
S670, S680, S690).
BH84535
Sectionalized Round Bar Concave Cover Plates (Set of 3)
108.90
For use with round bar concaves only. Covers used to even distribution of material to cleaning
shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
BH84229
Small Wire Concaves (Set of 3) - Wide Body
2,390.30
Not recommended for corn. Recommended for small grain and very brittle straw. (9660, 9760,
9860, 9670, 9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10388
Small Wire Concaves (Set of 3) - Wide Body
Not recommended for corn. Recommended for small grain and very brittle straw. (For MY15
and later S650, S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 26
2,390.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Equipment for Base Machine
PREMIUM OPERATOR'S CAB:
Pressurized Cab with HVAC ClimaTrak
Premium Storage Package
Premium operators seat
Actively Cooled Refrigeration Unit
Windshield Wiper (2-Blades) with Washer Dual
Tilt-Telescoping Steering Column
Seat with Air Suspension
Training Seat
Driver and Training Seat Belts
Service Lights
Beacon lights
Pull-down front sunshade 3-Position Pivoting
Operator's Ladder
Two adjustable heated cab mounted mirrors
Large Cup Holders
Auxiliary Power Outlet Strip
Business Band Radio Pre-wire
Basic Radio Package AM/FM Stereo Radio and
CD-Player
Antenna and two speakers
Auxiliary input jack located on front of radio
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Electro-Hydraulic Controlled header and separator
controls
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
CommandCenter color display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold (if
equipped)
Chopper position Video Camera Application (if
equipped)
TouchSet (Automatic Combine Adjustment)
Harvest Monitor AutoTrac Ready Wiring Harness and
Steering Components with Harvest Monitor System
LESS
GreenStar Display JDLink capable
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and Unloading
Auger Engage Controls
Quick-Stop Header/Unloading Auger
Disengage Switch
Draper Variable Belt Speed In-Cab Control
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine rpm
Fuel level and temperature gauge
Deck plate and dial-a-speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active
Header float system
Header Height Sensing System
LIGHTING:
Standard lighting package
Overhead work lights (four)
High beam driving lights (two)
Low beam driving lights (two)
Transport and Field Lamps (six)
Grain Tank and Unloading Auger Lamps (two)
Warning and Tail Lamps with Integral Turn Signals
(four)
Rotating beacon lights (three)
SideFinder Lights (two)
Cleaning Shoe Lights
Exit Lighting Rear Residue Discharge Lights (two)
Stubble Lights (two)
Deceleration Warning Light
FEEDERHOUSE:
Heavy-Duty Feederhouse (3060)
17 Degree Fore/Aft Adjustable front tilt frame
Heavy-Duty Reverser with Push Button
Electro-Hydraulic Shift Engagement
Single-Point Electric Hydraulic Hookup and
Latching System
2-Speed Feeder Chain
Stone Trap with Manual Dump
THRESHING AND SEPARATING:
TriStream Rotor Threshing Technology
762 mm Diameter (30 in.) Feeding and threshing
section
838 mm Diameter (33 in.) Separating Section
Total Rotor Length of 3168 mm (124.7 in.)
15 Grain Threshing Elements
Standard Feed Accelerator 10-Wing 420 mm (17 in.)
Diameter with 30 serrated wear strips
Two speed drive: 440/800 rpm (corn/grain)
Separator Drive
210-1000 RPM Dual-Range Posi-Torq
Discharge Beater and Grate
Five wing discharge beater with 10 wear strips
(Tri-Stream)
Cast Finger
Discharge Beater Grate 0.36 sq m total area
Discharge Beater Grate 0.36 sq m total area
Radial Pin Clutch
Three Concave Sections 1.1 sq m total area Round
Bar Concave (corn)
CLEANING:
2-Stage S-Series Cleaning System has:
12 Blades 500 mm Diameter (20 in.)
Dual Discharge Cleaning Fan
Deep Tooth Remote Adjustable Chaffer and Sieve
(corn)
Separator Air Discharge Chute Agitators
GRAIN HANDLING:
400 bu (14,100L) Grain Tank
3.8 (135L) bu per sec (average),
Unloading System with Unloading Auger
Manual Folding Grain Tank Loading Auger/Extensions
Extended wear grain handling system (rice)
RESIDUE MANAGEMENT:
Wing Blade Wide-Spread, Fine Cut, 2-Speed
Chopper with Integrated Chaff Spreader and
single-point adjustable knife bank
ENGINE:
John Deere 6 Cylinder 6135H (13.5L)
Rated Speed at 2100 rpm
Rated Power "ECE R120"(kw/hp) 405/543
Power [email protected] Speed(kw/hp) 37/50
Rate [email protected](kw/hp) 433/580
Peak [email protected](kw/hp) 460/617
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
PowerTech Plus Diesel Engine Technology with
turbocharger and air-air aftercooler
Electronically Controlled Fuel Injection and fuel
shutoff
200 ampAlternator
330 g (1250L) Fuel Tank
Rotary Screen Air Intake with Vacuum Pickup
Automatically Tensioned Poly-V Accessory Drive
Belts
Standard Capacity Engine Pre-Cleaner and air
cleaner filter system
High Capacity Wide Spaced Tube Radiator
Air Scoop Cooling Technology
Export Compliant Power unit. (Export only except
Australia and Mexico)
WHEELS AND DRIVES:
Drive Wheels and Tires
Steering Wheels and Tires
Speed Hydrostatic Ground Drive System
ProDrive Transmission with Harvest Smart Feedrate
Control
Heavy-Duty Final Drive
Adjustable Rear Axle with Heavy-Duty Spindles
HYDRAULICS:
Closed Center Hydraulic System
Proportional Header Height, Reel and spreader
speed control
High Capacity (45 gpm) System and Single Piece
Integral Valve
Assembly
Header Suspension System
Reel Fore/Aft Hydraulics
202 kW CommandTouch Multi-Speed Drive System -
CODE
Heavy-Duty Tilt Cylinder - 90 mm (3.50 in.) Lift
Cylinders
SERVICEABILITY:
Full Composite Flip-Open Side Shields
Central Lube Charts
Easy Access Lube Banks
Hydraulic Diagnostic Receptacles
Steel Tool Box with Tray
Battery Storage Container to Ground Level Extend Battery Posts and Cut-Off Switch
MISCELLANEOUS:
One 10-lbType ABC Fire Extinguisher (front
mounted) not included for Russia
One 2.5 gal. Water Fire Extinguisher. Shipped
empty, requires filling at pre-delivery. (rear
mounted) not included for Russia
Independent Hydraulic Brakes Park Brake
Back Up Alarm
Composite Styling with Air Scoop
Advanced Air Intake
CAN-BUS Electronic On-Board Communication
System with Solid State Power Distribution Centers
Temporary Surface Rust/Corrosion Protection
(Export Only)
LESS HEADER EQUIPMENT
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
01PEH
S690 Combine - HX (Model Year 2017)
500,459.00
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
DESTINATION
If additional languages for Operator's Manuals are required, order online from
http://techpubs.deere.com/.
North America
0202
USA
1,309.00
Include Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined
in the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0184
Canada
1,309.00
Includes Final Tier 4 Certified Engine
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable, do not
proceed and do not use the service.
OPERATOR'S MANUAL
0409
English
In Base Price
0413
French
Same Price
0437
Spanish
Same Price
0430
Portuguese
Same Price
0426
Chinese (sourced from NA)
Same Price
0504
General Purpose Regular Wear Package
VALUE PACKAGES
In Base Price
Includes: Separator Grate Covers. Requires:4882 TriStream Rotor Regular Wear Densepack
Ready, 4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0505
General Purpose Extended Wear Package
In Configuration
Includes: Separator Grate Covers. Requires: 4883 TriStream Rotor Configuration Extended
Wear Densepack,4832 Dyna-Flo PlusCleaning Shoe General Purpose Chaffer and Sieve with
TouchSet.
0506
Coarse Grain Package
In Configuration
Requires: 4882 TriStream Rotor Regular Wear Densepack Ready, 4834 Dyna-Flo
PlusCleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with TouchSet. Includes
additional components to optimize grain quality in high moisture corn.
0507
Small Grains Package
In Configuration
Includes: Separator Grate Covers, 848A Small Grain/Rice Cleaning Shoe. Requires: 4885
Variable Stream Rotor Configuration Regular Wear, 4832 Dyna-Flo Plus Cleaning Shoe
General Purpose Chaffer and Sieve with TouchSet.
0518
Small Tough Grains Regular Wear Package
6,692.00
Includes: Active Concave Isolation, Heavy Duty Separator Grates with Interrupter Bars,
Full-Travel Feederhouse Drum, Separator Grate Covers, 848A Small Grain/Rice Cleaning
Shoe. Requires: 4885 Variable Stream Rotor Configuration Regular Wear, 4832 Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0508
Small Tough Grains Extended Wear Package
6,692.00
Includes: Active Concave Isolation, Full-Travel Feederhouse Drum, Heavy Duty Separator
Grates with Interruptor Bars, Separator Grate Covers, 848A Small Grain/Rice Cleaning Shoe.
Requires: 4886 Variable Stream Rotor Configuration Extended Wear, 4832 Dyna-Flo Plus
Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet.
0510
Rice Package
3,735.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines, 848A Small Grains/Rice Cleaning Shoe. Requires:
4886 Rice Extended Wear Variable Stream Rotor Configuration, 4832 Dyna-Flo Plus
Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet, Extended Wear Grain
Handling code 5234.
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
VALUE PACKAGES ...Continued...
0511
Tough Rice Package
6,466.00
Includes: Tine Fast Feed Accelerator, Comb Floor, Heavy Duty Separator Grates with
Interrupter Bars, Rice Densepack Tines, Active Concave Isolation, 848A Small Grains/Rice
Cleaning Shoe. Requires: 4886 Rice Extended WearVariable Stream Rotor Configuration,
4832 Dyna-Flo Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet,
Extended Wear Grain Handling code 5234. Wear plates must be ordered separately.
0598
Custom Configuration
In Configuration
7015
Final Tier 4 Certified Engine
1121
Premium Cab
ENGINE EMISSION LEVEL SELECTION
In Base Price
OPERATOR'S STATION
In Base Price
Includes Premium Storage Package, Actively Cooled Refrigeration Unit, Dual Tilt Steering
Column with Foot Rests, Electric Adjust Heated mirrors, Enhanced Cab Styling.
RADIO
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
in right hand storage console, two speakers and external antenna. Only available with
Premium Cab 1121.
1413
Premium Radio Package with XM Radio
352.00
For U.S. and Canada Markets only. AM/FM Stereo, Weatherband, Compact Disc Player,
with MP3 file support, Remote Controls, USB port in right hand storage console, Auxiliary
Input Jack located in right hand storage console, Bluetooth capable including microphone,
Integrated Bluetooth Phone Book connection through CommandCenter, Audio-streaming with
compatible Bluetooth devices, XM Satellite capable including Satellite Antenna (Subscription
Required), Two Speakers, Subwoofer, and External Antenna. Volume, Speed Compensation,
bass, and treble radio functions can be viewed and configured on the CommandCenter
Display. Only available with Premium Cab 1121.
SEAT
1221
Enhanced Air Suspension Seat
In Base Price
Cloth operator and instructor seats. Only available with Premium Cab 1121.
1222
Leather Seat Package
2,100.00
Includes all features of the enhanced air suspension seat. In addition, includes leather covered
operator and instructor seat, heated and ventilated operator seat and leather wrapped steering
wheel.
Only available with Premium Cab 1121.
LIGHTING
1360
Standard Lighting
In Base Price
Includes eight cab roof mounted halogen lamps: Four overhead work lights, two high beam
driving lights, and two low beam driving lights.
1370
Standard Lighting and Header Extremity Lights
152.00
Includes standard lights plus two halogen lamps mounted on the lower cab fascia.
1375
LED Lighting Package
3,410.00
Eight cab roof mounted lights: Four overhead LED work lights, two halogen high beam
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
LIGHTING ...Continued...
driving lights, and two halogen low beam driving lights. Only available in Australia and New
Zealand.
1379
Premium LED Lighting Package & Header Extremity Lights
3,562.00
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities. CommandCenter are capable
of running AutoTrac and AutoTrac RowSense only (with appropriate activations purchased
and StarFire Receiver installed). GS3 2630 Displays are capable of all AMS functionality.
Includes Access Manager user lockout software, video capability and armrest bracket. One
video camera input pre-wired in the cab. Connector located on the outside rear of the cab. See
Parts for available cameras.
The GreenStar 3 2630 Display is required for advanced AMS
applications.
When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
additional GreenStar display.
1823
Touchscreen GS3 CommandCenter 7 in. (17.8 cm) Color Display
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
4,635.00
AG MANAGEMENT SOLUTIONS
Accuracy is dependent on the receiver signal level
1803
AutoTrac Ready with Harvest Monitor
For Australia/NewZealand/China: AutoTrac Ready.
moisture and mass flow sensors).
180A
In Base Price
Harvest Monitor Complete (Includes
AutoTrac Complete with Harvest Monitor (SF3) [StarFire 6000 Receiver]
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription [StarFire 6000
Receiver]
12,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and 1 Year
SF3 Subscription
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription [StarFire 6000
Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and RTK
Ready Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
27 February 2017 US & Canada
3-COMBINE- 5
14,895.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
180D
AutoTrac Complete with Harvest Monitor (SF1) [StarFire 6000 Receiver]
7,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation.
Harvest Monitor Complete (Includes moisture and mass flow sensors).
180E
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF3) [StarFire 6000
Receiver]
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
A subscription is required for SF3 accuracy. Subscription sold separately.
AutoTrac RowSense requires a properly equipped head.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
15,445.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, 1 Year SF3
Subscription and AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable). See Ag Sales Manual for additional information.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK Ready Subscription and AutoTrac
RowSense [StarFire 6000 Receiver]
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Subscription. Harvest Monitor Complete (includes
moisture and mass flow sensors).
RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability.
RTK functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
AutoTrac RowSense requires a properly equipped head.
180H
AutoTrac Complete with Harvest Monitor and AutoTrac RowSense (SF1) [StarFire 6000
Receiver]
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors).
A subscription is required for SF3 accuracy. AutoTrac RowSense requires a properly equipped
head.
CONNECTIVITY
Machine connectivity functions require cellular coverage. Usage of the JDLink System
requires customer's acceptance of the terms of the John Deere Telematics Subscription
Agreement, which describes John Deere's access and use of the data collected by the system.
JDLink customer account must be created to access JDLink Connect data.
Options with
JDLink Connect include: -1 Ethernet harness connecting the MTG to the primary
display/integrated processor, -1 Ethernet harness routed from the MTG to the optional
display port, -Antenna wiring harness for the Machine Communication Radio (MCR), and
the JDLink hardware: integrated cab wiring harness, antenna, Modular Telematics Gateway
(MTG) with Service ADVISOR Remote capability, and JDLink Ultimate Activation.
Subscription length of contract varies; Annual subscription renewal required after term of
27 February 2017 US & Canada
3-COMBINE- 6
10,395.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
service for continued functionality. Option availability limited by specific geographical
regions. Please refer to region specific price pages for appropriate ordering codes.
Use
of this service, and all rights and obligations of John Deere and the Customer (as identified in
the applicable agreement), are governed by the terms and conditions outlined in the
applicable Services and Software agreements available at www.JohnDeere.com/Agreements.
If these terms and conditions are not agreeable do not proceed and do not use the service.
188U
JDLink Hardware only - Subscription Not Included
In Base Price
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
189A
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
188S
JDLink Connect 5 Year subscription
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States, Canada, and Australia through
dealers that meet New Model Qualification requirements.
27 February 2017 US & Canada
3-COMBINE- 7
1,600.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
189B
JDLink Connect 5 Year subscription and Machine Communication Radio
5,299.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
MOBILE APPLICATIONS
1950
Less Harvest Mobile
-500.00
Not available in United States, Canada, Australia, and New Zealand.
1951
Harvest Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
separately from StellarSupport/JD Marketplace. Only available in United States, Canada,
Australia, and New Zealand.
1953
Wireless Data Server (WDS) with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality. Only available in United States, Canada, Australia, and New Zealand.
MACHINE AUTOMATION
1959
In Base Features: Interactive Combine Adjustment, Touch Set, VisionTrak, Harvest Smart,
and Engine Speed Management
In Base Price
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
1961
In Base Features PLUS Active Terrain Adjustment
3,020.00
Harvest Smart and Engine Speed Management only included with code 2020 (ProDrive).
FEEDERHOUSE TILT SELECTION
Level Land Feederhouse - Fixed Speed with Reverser
3031
110kW High Torque Fixed Speed Drive System - 3.15 In. (80 mm) Lift Cylinders
-24,854.00
For use with Rigid Auger Platforms 30 Ft. and less.
Rigid Draper Platforms 35 Ft. and less
Belt Pickup Platforms.
Lateral Tilt Feederhouse - Fixed Speed with Reverser
3056
110kW Heavy Duty Tilt Cylinder, High Torque Fixed Speed Drive System - 3.15 In. (80 mm)
Lift Cylinders
For use with Rigid and Flex Auger Platforms 35 Ft. and less.
Rigid and Flex Draper Platforms 40 Ft. and less.
Belt Pickup Platforms.
27 February 2017 US & Canada
3-COMBINE- 8
-18,000.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TILT SELECTION ...Continued...
3055
110 kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.15 In. (80 mm) Lift Cylinders
w/ Fore Aft Tilt
-15,155.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 40 ft or less, Rigid and Flex Auger Platforms 35 ft less,
Belt Pickup Platforms.
Includes Code 8141 (Advanced Hydro handle).
3064
110kw Heavy Duty Dual Tilt Cylinders, Fixed Speed Drive - 3.50 In. (90 mm) Lift Cylinders
w/ Fore Aft Tilt
-14,039.00
With Hydraulic Feederhouse Platform Tilt (Fore Aft)
For use with Rigid and Flex Draper 45 Ft. or less. Rigid and Flex Auger Platforms 35 Ft. or
less. Belt Pickup Platforms. Includes Code 8141 (Advanced Hydro handle).
Lateral Tilt Feederhouse - Variable Speed with Reverser
3060
202 kW CommandTouch Multi-Speed Drive System - Heavy-duty Tilt Cylinder - 3.50 In.
(90 mm) Lift Cylinders
-2,845.00
For use with StalkMaster Corn Heads 18-rows and less. Rigid and Flex Auger Platforms 35
ft and less. Rigid and Flex Draper Platforms 40 ft and less. Belt Pickup Platforms.
Requires ProDrive.
3063
202kw CommandTouch Multi-Speed Drive System, Dual-tilt Cylinders - 3.50 In. (90 mm) Lift
Cylinders w/ Fore Aft Tilt
In Base Price
With Hydraulic Feederhouse Platform Tilt (Fore Aft).
For use with StalkMaster Corn Heads 18-rows or less, Rigid and Flex Auger Platforms 35 ft
or less, Rigid and Flex Draper Platforms 45 ft or less, Belt Pickup Platforms.
Includes
Code 8141 (Advanced Hydro handle).
ROTOR TYPE
Wear type will include separator and concaves.
4882
TriStream Rotor Configuration Regular Wear (Densepack Ready)
In Base Price
Recommended for Corn, Soybeans, and General Purpose Grains.
4883
TriStream Rotor Configuration Extended Wear (Densepack Ready)
1,954.00
Recommended for Corn, Soybeans, and General Purpose Grains.
4884
Custom Cutter's Extended Wear Separation and Concave Package
7,604.00
Includes: Extended Wear (Thick Skin) Tri- Stream Rotor, Extended Wear Threshing Elements,
Separator Tines and Rotor Top Covers. Also includes: 20 Separator Grate Covers and
Extended Wear Round Bar Concaves for field installation. Requires Code 4832 (Dyna-Flo
Plus Cleaning Shoe General Purpose Chaffer and Sieve with TouchSet) and Code 4300
(Factory Installed Small Wire Concave).
4885
Variable Stream Rotor Configuration Regular Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
4886
1,887.00
Includes:
Variable Stream Rotor Configuration Extended Wear
Recommended for Straw Quality, Rice, and High Capacity Small Grain Handling.
Conical Top Covers, Adjustable Separator Vanes, Rear Flighting Discharge.
3,522.00
Includes:
CHAFFER AND SIEVE
4832
Dyna-Flo Plus Cleaning Shoe General Purpose Dual Adjust Chaffer and Sieve with
TouchSet (Electric Shoe Adjust)
In Base Price
Includes 9486: Separator Grate Covers (set of 20)
4834
Dyna-Flo Plus Cleaning Shoe Deep Tooth Adjustable Chaffer and Bottom Sieve with
27 February 2017 US & Canada
3-COMBINE- 9
Same Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
TouchSet (Electric Shoe Adjust)
Not recommended for use in food corn, popcorn or small grains. Includes additional
components to optimize grain quality in high moisture corn.
CONCAVES AND THRESHING
Wear type of factory installed concaves is determined by wear type of rotor selection. For
specific recommended crop applications for each of the three type Concaves offered, refer to
Agricultural Sales Manual.
4340
Round Bar Concave
In Base Price
4300
Small Wire Concave
448.00
4390
Extended Wear Small Grain Combination Concave
1,888.00
Includes: Extended Wear (boronized) Combination Small Wire Concaves (31-wire front and
25-wire mid and rear Concaves). Only available in Australia and New Zealand.
4302
Large Wire Concave
323.00
5232
Regular Wear Grain Handling System
5234
Extended Wear Grain Handling System
GRAIN HANDLING WEAR PACKAGE
In Base Price
4,206.00
Includes: Extended Wear, Stainless Steel Clean Grain Elevator, Stainless Steel Grain Tank
Charge Housing, Stainless Steel Grain Tank Loading Auger Housing, Heavy Duty Grain Tank
Cross Auger, and Vertical Unloading Auger.
GRAIN TANK EXTENSIONS AND COVERS
5371
Manual Grain Tank Extensions, LESS Covers
5373
Power Folding Grain Tank Covers
5424
22.5 Ft. (6.9M) 1-Piece Unloading Auger
In Base Price
5,273.00
UNLOADING AUGER
In Base Price
Not available for Export.
5425
22.5 Ft. (6.9M) Power Folding Unloading Auger
5,875.00
5426
22.5 Ft. (6.9M) 2-Piece Unloading Auger
1,196.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5427
22.5 Ft. (6.9M) 1-Piece Perforated Unloading Auger
515.00
Not available for export.
5428
26 Ft. (7.9M) Unloading Auger
2,394.00
Not available for export. Recommended for Platforms up to 40 Ft. and Corn Heads up to
16-rows 30 In.
5429
26 Ft. (7.9M) Unloading Auger
3,589.00
Export Only. Unloading Auger Unassembled and Crated - Requires Dealer Installation.
5431
26 Ft. (7.9M) Power Folding Unloading Auger
27 February 2017 US & Canada
3-COMBINE- 10
8,269.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
UNLOADING AUGER ...Continued...
5432
28.5 Ft. (8.7M) Unloading Auger
4,103.00
Not available for Export.
5433
28.5 Ft. (8.7M) Unloading Auger
5,300.00
Export Only. No homologation, auger comes uninstalled and requires dealer installation.
RUST PROTECTION
5600
Rust Protection for Transit
298.00
Required for protection of combine from road salt during transportation from factory during
winter months and for Export. Required for Export.
5601
LESS Rust Protection for Transit
In Base Price
Not available for Export.
RESIDUE DISPOSAL
Deluxe Residue
Includes: Fine Cut Chopper - 2-Speed Chopper drive with Neutral, Integrated Chaff Spreader.
5752
Deluxe Residue - Manual Adjust Vane Tailboard
In Base Price
Recommended for Platforms 30 ft and less.
5756
Deluxe Residue - In-cab operator controlled PowerCast Powered Tailboard with wind
compensation
7,008.00
Recommended for platforms 30 ft to 50 ft
Premium Residue
Includes: 2-Speed Chopper with Neutral - Drop straw/spread chaff, Chop/spread straw and
chaff, Integrated Chaff Spreader.
5758
Premium Residue - In-cab operator controlled Advanced PowerCast powered tailboard with
wind compensation
8,999.00
Recommended for Platforms 30 Ft. and greater. Not recommended if a majority of your
harvested crop is corn. If used in corn, it is recommended to install KXE10135 and
KXE10147.
With Fine Cut Chopper
Straw Spreaders
5722
Twin Disc Straw Spreader with Integrated Chaff Spreader and Variable Speed Control
-6,557.00
Recommended for Platforms 30 ft or greater.
5724
Wide Spread Twin Disc Straw Spreader with Integrated Chaff Spreader, Barrier Hoops,
In-cab Independent Disk Speed
-4,791.00
Recommended for Platforms 30 ft to 40 ft.
TRANSMISSION
2020
ProDrive Transmission with Harvest Smart Feedrate Control
Requires Premium Cab (code 1122).
27 February 2017 US & Canada
3-COMBINE- 11
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6753
IF800/70R38 R1W 187A8 CFO
384.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC, 612FC
StalkMaster, 616C,616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire option 6634, 6640, 6646, 6678, 6664, or 6674.
Available in Michelin (for all markets) or Firestone (not available in China).
6734
650/85R38 R1W Duals 173A8
11,798.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 618F, 622F, 625F, 630F, 635F, 625D, 635D, 630D, 640D, 630FD, 635FD,
640FD, 645FD, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, 616C
StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6640, 6646, 6674, 6678, 6664, or 6676.
Available in Firestone, Goodyear, or Michelin.
6751
520/85R42 R2 Duals (Firestone or Goodyear)
6,131.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, and 618C.
Firestone brand is 165A8 and Goodyear brand is 162A8. Available with steering tire options
6634, 6646, 6678, 6664 or 6676.
6747
IF1250/50R32 CFO R1W 201B (Firestone Only)
14,370.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612FC. 612FC
StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6674, 6678, 6664, or 6676. This tire is allowed
with 300mm, 400mm, 454mm axle spacers only.
6756
580/85R42 R1W Duals 166A8 (Goodyear or Firestone)
8,446.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6678, 6664, or 6676.
6759
IF900/60R32 CFO R1 182A8 (Firestone only)
In Base Price
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 630FD, 635FD, 612C, 616C, and 618C.
Available with steering tire options 6634, 6678, 6664, or 6646.
6762
IF520/85R42 CFO R1W 169B Duals (Goodyear or Firestone)
12,954.00
For use with the following front end equipment only: 615P, 618R, 620R, 622R, 625R, 630R,
618F, 620F, 622F, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD, 640FD,
645FD, 612C, 612C StalkMaster, 612FC, 612FC StalkMaster, 616C, 616C StalkMaster, 618C,
and 618C StalkMaster.
Available with steering tire options 6634, 6646, 6678, 6664, or 6676.
6764
VF520/85R42 CFO R1W 177A8 Duals (Michelin)
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
27 February 2017 US & Canada
3-COMBINE- 12
18,864.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
612FC StalkMaster, 616C, 616C StalkMaster, 618C and 618C StalkMaster.
Available with steering tire options 6640 or 6674.
6766
IF900/65R32 CFO R2 191A8 (Goodyear)
2,720.00
For use with the following front end equipment only: 615P, 625R, 630R, 625F, 630F, 635F,
625D, 630D, 635D, 640D, 630FD, 635FD, 640FD, 645FD, 612C, 612C StalkMaster, 612FC,
612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C StalkMaster.
Available with steering tire options 6634 or 6676.
6769
LSW1250/35R46 195D R2 (Goodyear)
23,170.00
Available with steering tire options 6634, 6676, and 6643. For use with the following front end
equipment only: 625R, 630R, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD, 635FD,
640FD, 645FD, 612C, 612FC. 612FC StalkMaster, 616C, 616C StalkMaster, 618C, and 618C
StalkMaster.
6780
LSW1100/45R46 195D R1W (Goodyear)
10,134.00
Available with steering tire options 6634, 6676, and 6643. For use with the following front end
equipment only: 615P, 625R, 630R, 625F, 630F, 635F, 625D, 630D, 635D, 640D, 630FD,
635FD, 640FD, 645FD, 612C, 612FC. 612FC StalkMaster, 616C, 616C StalkMaster, 618C,
and 618C StalkMaster.
6755
Tracks Complete Combine with 36 in. Ag. Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive (in base
equipment), 12 In. (300mm) axle extensions, dual (1047mm) ladder landing extension, and
short (1352mm) ladder. Available with steering tire options 6620, 6634, 6640, 6646, 6664,
6674, 6678, 6676. Available in the United States and Canada.
6760
Tracks Complete Combine with 36 in. Rice Track Belt without Unloading Tires
83,300.00
Requires Code 2020 - ProDrive Transmission. Includes Extra Heavy Duty Final Drive (in
base equipment), 12 In. (300mm) axle extensions, dual (1047mm) ladder landing extension,
and short (1352mm) ladder. Available with steering tire options 6620, 6634, 6640, 6646, 6664,
6674, 6678, 6676. Available in the United States and Canada.
6700
LESS Drive Wheels and Tires
-6,136.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6702
LESS Drive Wheels and Tires
-5,946.00
Includes 230 mm bolt-on extension, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6703
LESS Drive Wheels and Tires
-6,116.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1352 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6704
LESS Drive Wheels and Tires
-6,026.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1455 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6705
LESS Drive Wheels and Tires
-5,926.00
Includes 330 mm bolt-on extensions, ladder pivot module, and ISO 1554 mm length ladder.
Refer to Tire Compatibility Charts for tire selection.
6706
LESS Drive Wheels and Tires
-5,636.00
Includes 1047 mm extension, ladder pivot module, and ISO 1352 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
6707
LESS Drive Wheels and Tires
Includes 1047 mm extension, ladder pivot module, and ISO 1455 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
27 February 2017 US & Canada
3-COMBINE- 13
-3,594.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
6708
LESS Drive Wheels and Tires
-5,446.00
Includes 1047 mm extension, ladder pivot module, and ISO 1554 mm length ladder. Refer to
Tire Compatibility Charts for tire selection.
STEERING WHEELS
Refer to Agricultural Sales Manual Tire Compatibility Charts for Wheel Track Dimensions,
Ballast Recommendations and Detailed Header Compatibility information.
For tire preference choice see "Attachments - Order as Desired", "Tire Brand Preference"
listing.
-If only one tire brand is listed then code 9660 (No Brand Preference) is required.
-If a tire preference code is NOT chosen, then code 9660 (No Brand Preference) is assumed
and the brand is determined by the factory.
-Steering tires brand preference is determined by drive tire and brand preference choice.
-For road homologation please check your local road homologation and contact your
responsible authorities.
6634
750/65R26 (Goodyear or Firestone)
1,829.00
Goodyear is a 750/65R26 R1W 166A8 and Firestone is 750/65R26 R1W 169A8.
6640
VF620/70R26 CFO 173A8 TL CEREXBIB (Michelin Only) - 3.49m width
1,898.00
6643
LSW IF710/60R30 CFO R1W 177D (Goodyear only)
2,236.00
6646
VF750/65R26 R1W 177B (Firestone Only)
3,198.00
6664
VF620/75R26 R1W 172B (Firestone)
3,000.00
6674
VF750/65R26 CFO R1W 177A8 (MICHELIN)
4,598.00
6676
VF710/65R26 R2 177D (Goodyear)
4,798.00
6678
620/75R26 R1W 166A8 (Goodyear)
In Base Price
6600
LESS Steering Wheels and Tires
-4,688.00
Not available for Export. For use with 28L-26 In. only. Includes Axle Stops. Not available
with LSW tires 6769 and 6780.
6602
LESS Steering Wheels and Tires
-4,708.00
Not available for Export. For use with all Steering Tires EXCEPT 28L-26 in.
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
2220
2-Wheel Drive
In Base Price
2240
Powered Rear Axle, 2-Speed 4-Wheel Drive
8700
Engine Coolant Heater - 110 Volt (Not available for Export)
8701
Engine Coolant Heater - 220 Volt (Export Only)
106.00
8709
Fuel Pre-Filter/Water Separator
589.00
23,824.00
ENGINE
In place of Base Equipment Filter/Water Separator.
Recommended where fuel quality is a concern.
27 February 2017 US & Canada
3-COMBINE- 14
68.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ENGINE ...Continued...
8649
Factory Installed Air Compressor
3,065.00
Includes two hoses and two air wands that can be stored on the machine. Includes two
connection points on the combine: one located at ground level above the left rear tire and one
located on the engine deck. Not available in China.
OPERATOR'S STATION
8141
Advanced Hydrohandle
158.00
Included with 3055, 3061, 3062, 3064 and 3063 (Hydraulic Feederhouse Platform Tilt (Fore
Aft)). Also required with 18BJ and 18CJ (JDLink Connect/Machine Communication Radio).
Enables 600D Header Platform Tilt Operation, integrated in the hydrohandle functions.
CAMERA OBSERVATION SYSTEM
8145
Camera Ready
338.00
Cameras are not included. Includes harnesses and brackets factory installed at the unloading
auger to enable view of auger boot location over the grain cart when unloading auger is
swung out, at grain tank covers to enable grain tank visibility and beneath the rear beacon
light to enable rear view.
Requires 2630 Display on corner post or CommandArm for use.
FEEDERHOUSE TYPE
8315
Feed Accelerator Slow Speed Drive
475.00
320-770 RPM. Recommended only for use in edible beans, food corn, or popcorn when
optimum grain quality is desired in these crops. Not recommended for Rice. Not available with
4885 or 4886. Not available with code 9315.
FAST (FEED ACCELERATOR AND STONE TRAP)
9315
Feed Accelerator Slow Speed Drive
1,752.00
320-770 RPM. Recommended for use in edible beans, food corn, and popcorn. Certain
conditions may see a straw quality improvement with slower accelerator speeds, but material
handling may be sacrificed when in tougher conditions. Not recommended for use in
Rice. Available on both the TriStream and Variable Stream Rotor. For Zweibrucken-built
machines, only available for Australia and New Zealand. Not available with Feed Accelerator
Slow Speed Drive (code 8315).
9317
Feed Accelerator Smooth Wear Strips (Set of 30)
348.00
Recommended for improved grain quality in crops such as food corn and seed crops.
The smooth wear strips on the feed accelerator are only compatible with the TriStream rotor
FAST system.
FEEDERHOUSE TYPE
9300
Feederhouse Drive Oil Cooler
459.00
Recommended for use with chopping Corn Heads. For combines (PIN 700801 and Up). Comes
in base machine when a Multi-Speed or Heavy Duty High Torque Variable Speed Drive
Feederhouse are ordered.
9311
Enhanced Front End Equipment Single Point Latching
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900 Series Platforms with Single Point Latching System.
Please refer to Ag Sales Manual for other compatibility information.
27 February 2017 US & Canada
3-COMBINE- 15
122.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDERHOUSE TYPE ...Continued...
9312
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
9314
Enhanced Front End Equipment Single Point Latching
122.00
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
SEPARATION
8499
Heavy Duty Separator Grates
3,735.00
Available only with Variable Stream Rotor. Includes Interruptor Bars.
Included with 0511, 0510, 0508, 0518.
CONCAVES
8497
Active Concave Isolation
2,731.00
Available with TriStream Rotor Configuration Regular Wear (code 4880), TriStream Rotor
Configuration Regular Wear (Densepack Ready) (code 4882), TriStream Rotor Configuration
Extended Wear (Densepack Ready) (code 4883), or Custom Cutter's Extended Wear
Separation and Concave Package (code 4884). Not available with Small Tough Grains
Extended Wear Package (code 0508), Rice Package (code 0511), or Small Tough Grains
Regular Wear Package (code 0518). Includes Heavy Duty Feederhouse Slip Clutch
(1300/1500 N-m).
CHAFFER AND SIEVE
8220
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
-1,565.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and Dual Landing Extension and related
parts.Reference DTAC Solution 61907 for information needed for proper wheel and tire
equipment in a SideHill application. Not for export.
8221
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes less Axle
Spacer and Truss Rod, includes Short Ladder and related parts. Reference DTAC Solution
61907 for information needed for proper wheel and tire equipment in a SideHill application.
Not for export.
8480
SideHill Ready Configuration for combines ordered with Dual Wheel Drive Tires
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
27 February 2017 US & Canada
3-COMBINE- 16
-1,565.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHAFFER AND SIEVE ...Continued...
8481
SideHill Ready Configuration for combines ordered with Single Drive Tires
978.00
SideHill combines utilizing the Hillco leveling system do not need Lateral Tilt Feederhouse
functionality as it is provided through the Hillco kit, so it is recommended to order a Level
Land Feederhouse. SideHill combines utilizing the RAHCO SideHill solution and wanting
Lateral Tilt Feederhouse functionality will need to configure their combine with a Lateral Tilt
Feederhouse option. This SideHill Ready Configuration includes BH92257, comes with Axle
Spacer and Truss Rod, includes Short Ladder, and Dual Landing Extension and related parts.
Reference DTAC Solution 61907 for information needed for proper wheel and tire equipment
in a SideHill application.
848A
Small Grain/Rice Cleaning Shoe
Same Price
Recommended only on machines that will be used almost exclusively in small grains. Should
not be used if machine spends time in coarse grain. Shoe is optimized for small grain
performance; front chaffer extension is removed; small grain windboard included. Not
compatible with 0506 Coarse Grain Package. Included with respective crop packages (code
0507, 0508, 0510, 0511, 0518). Only available on S680 and S690 models.
CONCAVES AND THRESHING
9404
Densepack Threshing Tines for Variable Stream Rotor
826.00
Only available with Rotor Option Codes 4885 and 4886. Additional threshing tine base
weldments for installation into the densepack locations of a Variable Stream Rotor only. Can
be used to improve material handling in some tougher conditions such as rice and grass seed
harvest. May decrease machine performance if used in dry brittle crop conditions.
Wear plate kits KXE10049 (rice wear plates), KXE10048 (grain wear plates) must be ordered
separately.
Rice machines from factory already come with these tines installed.
9433
Sectionalized Concave Cover Plates for Large Wire and Small Wire Concaves only
1,132.00
For additional threshing in hard to thresh crops.
9437
Additional Threshing Concave Insert Bars for Round
Bar Concaves (set of two)
869.00
One set required per concave section. Use if harvesting small grains with Round Bar
Concaves.
9425
Extended Wear (Heat-Treated) Round Bar Concaves (set of three)
3,472.00
Best for corn and soybeans.
Not recommended for rice, canola, grass seed.
Use in high yielding or abrasive conditions.
9426
Small Wire Concaves (set of three)
3,703.00
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, rice, sunflowers.
9427
Large Wire Concaves (set of three)
3,564.00
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
9435
Sectionalized Concave Cover Plates (set of three) Round Bar Concaves only
223.00
This cover assembly is used for additional threshing in hard to thresh crops and to even out
the distribution of crop to the cleaning shoe.
9428
Extended Wear Small Wire Concaves (set of three)
5,288.00
Recommended for high yielding crops or abrasive crop conditions (such as rice).
Best for Canola and Grass seed, good for small grains with very brittle straw.
Not recommended for corn, soybeans, sunflowers.
9429
Extended Wear Large Wire Concaves (set of three)
Recommended for high yielding crops or abrasive crop conditions (such as rice).
27 February 2017 US & Canada
3-COMBINE- 17
4,927.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
Best for sunflowers and sorghum, good for corn, soybeans and small grains.
Not recommended for canola.
SEPARATION
9486
Separator Grate Covers (set of 20)
1,174.00
Used when harvesting very dry small grain. Reduces chaff load to the cleaning shoe. In base
equipment for Small Grain combines. Includes five sets of four covers (20 total).
9403
Rice Performance Enhancement Package
2,495.00
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components that when used in certain configurations (dependent on crop/conditions) may
enhance the separation performance of the combine. Includes instructions on how/when to
use bundle components. Only available with 0510 and 0511
CHAFFER AND SIEVE
9482
SideHill Performance Package
829.00
Recommended for sidehill conditions to reduce grain loss. Includes full-length tall chaffer
dividers, grain return pan partitions and grain agitator paddles.
9497
Adjustable Front Chaffer Louvers (Set of 4)
765.00
Recommended for crops with dense green stalks.
GRAIN HANDLING
8525
Clean Grain Auger and Fan Bottom Protection Shielding
295.00
9510
Perforated Elevator Boots, Doors, and Clean Grain Cross Auger Trough
337.00
9522
Additional "Full" Grain Tank Sensor
208.00
GRAIN HANDLING
For sidehill applications. Already in base equipment on HillMaster machines.
TIRE BRAND PREFERENCE
Tire brand preference choice is for both front and rear tires.
by front drive tire preference choice.
9660
Rear tire brand is determined
No Brand Preference
No Charge
Required if only one brand of drive tire is listed. Not available in China.
9661
Firestone Brand Preferred
800.00
This Code is not required if Firestone is the only brand listed for drive tire. Use Code 9660.
9662
Goodyear Brand Preferred
800.00
This Code is not required if Goodyear is the only brand listed for drive tire. Use Code 9660.
Not available in China.
9663
Michelin Brand Preferred
This Code is not required if Michelin is the only brand listed for drive tire. Use Code 9660.
27 February 2017 US & Canada
3-COMBINE- 18
1,200.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS
All spacers, except Code 9669, include required Ladder Extension. Please refer to the S-Series
tire spacing chart on Ag Sales Manual.
9668
2 In. (50mm) Wheel Spacer
406.00
Not available with Codes 9669, 9220, 9221, 9222, 9223, and 9224.
9669
4 In. (96 mm) Wheel Spacer (no Ladder Extension)
749.00
Not available with Codes 9668, 9220, 9221, 9222, 9223, and 9224.
9220
4 In. (105 mm) Axle Spacer
2,419.00
For increased mud clearance. Not available with dual tire codes 6734, 6746, 6751, 6756.
9221
6.5 In. (165mm) Axle Spacer
3,699.00
Not available with dual tire codes 6734, 6746,6751, 6756. May only choose one of: 9220,
9221, 9222, or 9224.
9222
12 In. (300 mm) Axle Spacer
3,788.00
Not available with dual tire codes 6734, 6746,6751, 6756.
9223
16 In. (400 mm) Axle Spacer
3,852.00
9224
18 In. (454 mm) Axle Spacer
4,133.00
Not available with dual tire codes 6734, 6746,6751, 6756.
HITCHES
8640
Semi-Automatic Rear Hitch with Wiring Harness, allows a single operator to connect trailer
to combine
1,022.00
Export Only. Rated 4500 kg.
8641
Manual Rear Hitch with Wiring Harness for Towing Header Trailer
757.00
Export Only. Rated 4500 kg.
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BXE10752
2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 785001 - )
28,262.30
For S680 and S690 combines.
BXE10717
4WD Conversion Bundle - S680, S690
28,262.30
For S680 and S690: Model Year 2012-Model Year 2015 machines.
Cab and Controls:
BXE10669
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600F, 600R, 600D and 615P Platforms prior to Model Year 2016 (Up to
PIN 785000 Harvester/US built) and 900D and 900 Series Platfroms with Single Point
Latching System.
Please refer to Ag Sales Manual for other compatibility information.
BXE10670
Enhanced Front End Equipment Single Point Latching
Required for use with 600C Corn Heads prior to Model Year 2016 (Up to PIN 785000
Harvester/US built) and 90 Series corn heads with single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
27 February 2017 US & Canada
3-COMBINE- 19
134.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10697
Enhanced Front End Equipment Single Point Latching
134.20
Required for use with 600FD Draper Platforms prior to Model Year 2016 (Up to PIN 785000
Harvester/US built).
Please refer to Ag Sales Manual for other compatibility information.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
BL15013
Smoker Option
60.45
For S550, S650, S660, S670, S680, S690 Combines. Replaces accessory power connector with
an ashtray and lighter.
KXE10433
Three Camera Bundle
1,403.77
Includes three Motec cameras (AXE41697) to be used in conjunction with factory installed
Camera Ready bundle code 8145. Cameras can be mounted to show views from the rear of the
machine, from the unloading auger, and the grain tank area of the combine. For use with
Model Year 2017 and newer machines.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
Cleaning:
AXE47285
10 mm Fixed Round Hole Sieve
2,202.18
S-series cleaning shoe: S660-S690. Available on MY16 and newer (PIN 785000 -).
AXE47286
3 mm Fixed Round Hole Sieve
2,097.31
S-series cleaning shoe: S650-S690. Available on MY16 and newer (PIN 785000 -).
BXE10729
Active Terrain Adjustment Conversion Bundle
3,654.20
Available on MY16 machines and newer (PIN 785000 -) ordered without the factory installed
Active Terrain Adjustment option.
BXE10692
Adjustable Front Chaffer Louvers
946.84
Recommended for crops with dense green stalks. Available for S650, S660, S670, S680, and
S690 MY16 and newer (PIN 785000 -).
BXE10475
Class 6/7 Side Hill Bundle
1,060.94
S650, S660, and S670. Also needed on S680 and S690 combines that are not equipped with an
extended front chaffer. Available on MY16 and newer (PIN 785000 -).
BXE10476
Class 8/9 Side Hill Bundle
S680 and S690. Available on MY16 and newer (PIN 785000 -).
27 February 2017 US & Canada
3-COMBINE- 20
576.18
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
AXE47216
General Purpose Chaffer
1,569.90
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Sieve for MY16 and newer (PIN 785000 -).
AXE47218
General Purpose Sieve
1,356.84
For use in food corn, popcorn or small grains. Recommended to be used in conjunction with
General Purpose Chaffer for MY16 and newer (PIN 785000 -).
Engine:
SWDEF110VKIT 110V Pump Kit
858.57
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF12VKIT
12V Pump Kit
852.86
4' suction hose with closed system dry-break coupler; 20' discharge hose with stainless steel
automatic shutoff nozzle; pump delivers 7-10GPM; 5-year pump warranty; kit includes a
closed system valve and dip tube for a 55-gal drum.
SWDEF025
2.5 gal jug of John Deere Diesel Exhaust Fluid
0.00
11.75 x 9.5 x 7.6"; 25lbs. Full.
SWDEFPDU20T 20gal Portable Dispensing Unit with lockable, hinged lid
1,680.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 36"W x 18"D x 22"H.
SWDEF275
275gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 45.75"; 2750lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF330
330gal tote of John Deere Diesel Exhaust Fluid
0.00
39.4 x 47.2 x 53.15"; 3141lbs. Full; Micromatic EPV and Butterfly valve.
SWDEF055
55gal drum of John Deere Diesel Exhaust Fluid
0.00
Does not include drop tube/valve; 23.5 x 35"; 550lbs. Full.
SWDEFPDU60T 60gal Portable Dispensing Unit with lockable, hinged lid
1,864.00
Forklift/strap guide accessible feet; 12V self-priming diaphragm pump; 20' dispensing hose
with stainless steel, auto shutoff nozzle; pump delivers 7-10GPM; pump is easily removed for
use with totes and drums; rust resistant powder coat finish (gray); view strip to monitor DEF
levels; outside dimensions: 45"W x 24"D x 30"H.
BXE10700
Air Compressor Conversion Kit
3,708.10
For S680, S690 Combines equipped with Final Tier 4 Engines.
BXE10701
Air Compressor Conversion Kit
3,708.10
For S680, S690 Combines equipped with Tier 2 Engines.
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
FAST (Feed Accelerator and Stone Trap):
BH84027
Contoured Serrated Feed Accelerator Wings
Provides fast yet gentler handling than the standard serrated wear strips. Recommended when
harvesting viney crops such as edible beans. Not for use in Rice. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
27 February 2017 US & Canada
3-COMBINE- 21
1,123.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84496
Expanded Stone Trap Door - Wide Body
1,573.00
Two-piece feed floor for improved rock protection. May reduce capacity in tough green
stemmed crops. (9660, 9760, 9860 PIN 720101 and Above.) (9670, 9770, 9870, S650, S660,
S670, S680, S690).
BXE10741
Feed Accelerator Slow Speed Drive
1,952.99
Available for S650, S660, S670, S680 and S690 MY16 and newer (PIN 785000-). 320-770
RPM. Recommended for use in edible beans, food corn or popcorn when optimum grain
quality is desired in these crops. Not recommended for use in Rice. Not recommended with the
Variable Stream rotor.
BH81489
Feed Accelerator Smooth Wear Strips (Set of 30)
372.90
For Front Feed Accelerator. Recommended for optimum grain quality in specialty crops such
as popcorn, food corn, etc. Not for use in Rice. Conversion to standard corn/grain FAST
required if machine equipped with tough crop or tine fast (9660, 9760, 9860, 9670, 9770,
9870, S650,S660, S670, S680, S690).
BH84447
High Torque, Posi-Torq Variable Speed Feederhouse Drive Conversion for combines
equipped with the Heavy Duty Posi-Torq Variable Speed Drive System
7,641.70
Recommended for use with chopping corn heads 8 Rows and larger, or high yielding green
stem corn conditions with non-chopping corn heads 12 Rows and larger. For 9660 STS, 9670
STS, 9760 STS, 9770 STS, 9860 STS and 9870 STS, S660, S670, S680, S690 combines.
BH84582
Spike Feed Accelerator
4,699.20
For use in tough material handling rice conditions where rice is down and tangled. Not for use
with stripper headers. Not for use in corn/grain harvest. (9660, 9760, 9860, 9670, 9770, 9870,
S660, S670, S680, S690).
BH84416
Tine Feed Accelerator
4,453.90
For use in tough material handling rice conditions where slug. Note: Rice machines from
factory come with tine ffed accelerator installed. (9660, 9760, 9860, 9670, 9770, 9870, S660,
S670, S680, S690).
Grain Handling:
BH92171
BXE10151
400 Bushel Manual Grain Tank Extensions
Active Tailings Perforated Boot Door
1,494.90
218.90
Used on S680 or S690 only. Use in conjunction with either BXE10094 (S680) or BXE10096
(S690).
BXE10270
Additional "Full" Grain Tank Sensor
228.80
For S550, S650, S660, S670, S680, S690 Combines.
BXE10096
BXE10143
Door, Extra High Capacity, Clean Grain - S690
469.70
Slow Speed Clean Grain Elevator Drive (Machines with Active Tailings: S680/S690)
575.30
Only available for MY2012 through MY2015 machines.
Reduces speed of Clean Grain Elevator from 400 RPM to 250 RPM. Recommended for edible
beans or soybeans only. Not recommended for crops in excess of 50 bushel/acre yield. Refer to
the Agricultural Sales Manual for additional ordering information and GreenStar limitations.
H229907
Steel Paddle Tailing Elevator for all 9770 STS, 9870 STS, S670, S680 and S690 Combines
20.19
Does not apply to S690 HillMaster.
Ladder Extensions:
BXE10121
230 mm Bolt-on Single Tire Platform
For S550, S660, S670, S680, S690 Combines. Includes 230 mm bolt-on platform and rail post.
27 February 2017 US & Canada
3-COMBINE- 22
512.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10122
330 mm Bolt-on Single Tire Platform
537.90
For S550, S660, S670, S680, S690 Combines. Includes 330 mm bolt-on platform and rail post.
BXE10120
Dual Tire Extension
1,590.60
For S550, S660, S670, S680, S690 Combines. Includes: Dual extension and applicable
mounting, hardware, extension handrails, and chains. (Serial Number 764999).
BXE10124
Long Length Ladder
1,940.40
For S550, S660, S670, S680, S690 Combines. Includes: 1554 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10420
Long Length Ladder
1,940.40
(Serial Number 765000-).
BXE10123
Medium Length Ladder
1,812.80
For S550, S660, S670, S680, S690 Combines. Includes: 1455 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10421
Medium Length Ladder
1,812.80
(Serial Number 765000-).
BXE10156
Short Length Ladder
1,688.50
For S550, S660, S670, S680, S690 Combines. Includes: 1352 mm length ladder components,
hangers, and hanging step. (Serial Number 764999).
BXE10422
Short Length Ladder
1,285.90
(Serial Number 765000-).
Residue Disposal:
KXE10135
BXE10158
APC Corn Kit
490.78
Advanced PowerCast Tailboard
7,227.00
For MY14 and Older S670, S680, S690 Combines.
BXE10354
Advanced PowerCast Tailboard
7,227.00
For MY15 and Newer S670, S680, S690 Combines.
BXE10178
Chopper Drive Shielding
497.20
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10357
Chopper Drive Shielding
497.20
For MY15 and Newer S660, S670, S680, S690 Combines.
KXE10147
Corn Kit OSB Cover
519.32
KXE10121
Deflector - PowerCast Tailboard
143.61
KXE10148
Distribution Kit - Standard Flex Residue
277.85
BXE10184
Fine Cut Chopper Drive Bundle
2,603.70
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10361
Fine Cut Chopper Drive Bundle
2,603.70
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10172
Fine Cut Chopper with Standard VTB Outlet
For MY14 and Older S660, S670, S680, S690 Combines.
27 February 2017 US & Canada
3-COMBINE- 23
11,180.40
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10355
Fine Cut Chopper with Standard VTB Outlet
11,180.40
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10181
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY14 and Older S660, S670, S680, S690 Combines.
BXE10358
Flex Residue Straw Spreader with Integrated Chaff Spreading, In-Cab Variable, Single
Speed Control
6,790.30
For MY15 and Newer S660, S670, S680, S690 Combines.
BXE10362
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10497
Hydraulic + Electric for Advanced PowerCast (FC and XFC)
2,703.80
Closed Center Hydraulics (For MY14 and Older S680, S690).
BXE10191
Hydraulic + Electric for PowerCast
2,115.30
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10364
Hydraulic + Electric for PowerCast
2,115.30
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10210
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10212
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Closed Center Hydraulics (For MY14 and older S680, S690).
BXE10368
Hydraulic + Electric for Straw Spreaders: Dual Speed
3,298.90
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10366
Hydraulic + Electric for Straw Spreaders: Single Speed
1,476.20
Closed Center Hydraulics (For MY15 and newer S680, S690).
BXE10174
PowerCast Tailboard
5,625.40
BXE10179
Standard Deflectors
1,128.60
BXE10176
Standard Vane Manual Tailboard
3,774.10
BH84523
Straw Spreader Parts, Extra Wide, for use on Twin Disk, Wide Spread
with Integrated Chaff Spreader
1,942.60
For 9650 STS, 9660 STS, 9670 STS, 9750 STS, 9760 STS, 9770 STS, 9860 STS, 9870 STS and
S650, S660, S670, S680, S690. For spread width up to 40 Ft.
Separating:
BXE10195
HD Grate-Separator Covers (Set of 20)
1,523.50
Only use with HD welded frame separator grates. Used to reduce chaff load and/or alter
distribution of material to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S660, S670,
S680, S690).
BXE10645
Separator Grate Covers (Set of 4)
Covers included in small grain combines and custom cutter corn machines. Used to reduce
chaff load and/or alter distribution of material to cleaning shoe. Covers should not be installed
during corn harvest. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
27 February 2017 US & Canada
3-COMBINE- 24
133.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Spacers:
BH92259
12 In. (300 mm) Axle Spacer
2,743.40
For S680 and S690.
Requires 1047 mm Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires
require 1352 Length Ladder.
BH92261
16 In. (400 mm) Axle Spacer
2,844.60
For S680 and S690.
For 36 In. and 38 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. For 30 In.
rows with 76X50-32 tire. Requires 1047 mm Ladder Extension. 76X50-32 Requires 1455
Length Ladder, all other tires require 1352 Length Ladder.
BH92263
18 In. (454 mm) Axle Spacer
3,179.00
For S680 and S690.
For 40 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. Requires 1047 mm
Ladder Extension. 76X50-32 requires 1455 Length Ladder, all other tires require 1352 Length
Ladder.
BH92131
2 In. (50 mm) Wheel Spacer
504.90
For S550, S660, S670, S680, S690 Combines. Requires 330 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92266
4 In. (105 mm) Axle Spacer
2,228.60
For S680 and S690.
For 30 In. rows with 30.5 In. wide, 800 mm wide and 900 mm wide tires. 800 mm wide tires
require 330 mm Ladder Extension. 900 mm wide tires require 1047 mm Ladder Extension. Not
recommended with the 76X50-32.
BH92134
4 In. (96 mm) Wheel Spacer
673.20
For S550, S660, S670, S680, S690 Combines. For 30 In. rows with 30.5 In. wide, 800 mm wide
and 900mm wide tires. Requires 330 mm Ladder Extension. Not recommended with 76X50-32.
BXE10141
50 mm Wheel Spacer Assembly - Single Wheel Only
673.20
For S550, S660, S670, S680, S690 Combines.
BH92268
6.5 In. (165 mm) Axle Spacer
2,565.20
For S680 and S690.
Requires 1047 mm Ladder Extension and 1352 mm Length Ladder. Not recommended with the
76X50-32.
BH81747
Parts Assembly - Box of Final Drive Axle Extensions
150.70
For S550, S660, S670, S680, S690 Combines. Includes all attaching hardware for axle
spacers.
Threshing:
BH84308
Concave Insert Bars for Round Bar Concaves (Set of 2)
955.90
Provides additional threshing in round bar concaves. One set required per concave section.
Use if harvesting small grains with round bar concaves. (9660, 9760, 9860, 9670, 9770, 9870,
S650, S660, S670, S680, S690).
BXE10020
Densepack Threshing Tines for Variable Stream Rotor
For use with Variable Stream Rotors ONLY (option codes: 4885 and 4886). Additional
threshing tine base weldments for installation into the densepack locations of a variable stream
rotor only. Can be used to improve material handling in some tougher conditions such as rice
and grass seed harvest. Note: May decrease machine performance if used in dry brittle crop
conditions. Note: Wear plate kits (grain vs. rice) must be ordered separately through service
parts. Note: Rice machines from factory already come with these tines installed.
27 February 2017 US & Canada
3-COMBINE- 25
908.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
S690 Combine - HX (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84581
Discharge Flights for TriStream Rotors
294.80
For use with TriStream Rotors ONLY (option codes: 4880/4881/4882/4883/4884). Flights for
rear or rotor to aid in material conveyance to discharge beater. (9660, 9760, 9860, 9670,
9770, 9870, S650,S660, S670, S680, S690).
BH84286
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For 9660 STS, 9760 STS, 9860 STS and MY14 and earlier S650, S660. S670, S680 and S690
combines.
BXE10391
Extended Wear Large Wire Concaves (Set of 3)
2,524.50
For MY15 and later S650, S660. S670, S680 and S690 combines.
BH84226
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (9660,
9760, 9860, 9670, 9770, 9870 and MY14 or earlier S660, S650, S670, S680, S690 combines).
BXE10387
Extended Wear Round Bar Concaves (Set of 3)
1,885.40
Recommended for corn and soybeans. Use in high yielding or abrasive conditions. (For MY15
and later S660, S650, S670, S680, S690).
BH84285
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (9660, 9760, 9860, 9670,
9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10389
Extended Wear Small Wire Concaves (Set of 3)
2,642.20
Recommended for high yielding crops or abrasive crop conditions. (For MY15 and later S650,
S660, S670, S680, S690 combines).
BH84227
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (9660, 9760, 9860, 9670, 9770, 9870 and
MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10390
Large Wire Concaves (Set of 3)
2,272.60
Recommended for use in sorghum and soybeans. (For MY15 and later S650, S660, S670, S680,
S690 combines).
BXE10491
Rice Performance Enhancement Package
3,348.40
Bundle for use in rice configuration machines only. Contains separator cage and rotor
components when used in certain configurations (dependent on crop/conditions) may enhance
separation performance in the combine. Includes instructions on how/when to use bundle
components. (S660, S670, S680, S690) (PIN 775000 -).
BH84534
Sectionalized Flat Bar Concave Cover Plates (Set of 3)
577.50
For use in Large Wire and Small Wire Concaves Only. Set of 3 covers with 4 pieces to make
one complete cover. For additional threshing in hard to thresh crops. Can also be used to
change crop distribution to cleaning shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660,
S670, S680, S690).
BH84535
Sectionalized Round Bar Concave Cover Plates (Set of 3)
108.90
For use with round bar concaves only. Covers used to even distribution of material to cleaning
shoe. (9660, 9760, 9860, 9670, 9770, 9870, S650, S660, S670, S680, S690).
BH84229
Small Wire Concaves (Set of 3) - Wide Body
2,390.30
Not recommended for corn. Recommended for small grain and very brittle straw. (9660, 9760,
9860, 9670, 9770, 9870 and MY14 and earlier S650, S660, S670, S680, S690 combines).
BXE10388
Small Wire Concaves (Set of 3) - Wide Body
Not recommended for corn. Recommended for small grain and very brittle straw. (For MY15
and later S650, S660, S670, S680, S690 combines).
27 February 2017 US & Canada
3-COMBINE- 26
2,390.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Equipment for Base Machine
Electronically controlled high pressure common rail
fuel injection pump (HPCR) with 2500 bar injection
pressure Rotary screen cooling air intake with
brush and chaff suction fan Turbo-charged,
Air-to-air charge cooler 200 Ah alternator Extra
heavy duty single reduction final drives Height
adjustable rear axle HVAC - Heating, Ventilation &
Air Conditioning System - Display & Armrest
controlled GreenStar 3 CommandCenter display
Enhanced automatic combine adjustment (ACA)
settings Infotainment Interactive Combine
Adjustment 1 single cab corner post display state-of-the-art color electronic instrumentation 3
way adjustable steering column Starter and starting
aid push button switch Two-speed and intermittent
2-Blade Windshield wiper and windshield washer
Breakaway, foldable cab mounted mirrors with beacon
lights Centered operator seat with air suspension,
fore-aft and lateral attenuation plus height
adjustable foldable armrest Integrated operator
training seat Footrest bar installed on the
steering column. Enables a more convenient and
relaxed driving operation. Storage compartments
Right hand window large compartment with lid Left
hand door netted area 27 Liter Active Refrigerator
(base on Premium Cab) 8135 2x 12V power outlets
Convenience outlets for power JDLink Telematics
ready GreenStar-ready wiring system Tailing laser
monitoring Electrically Adjustable Heated Cab
Mounted Mirrors Antirotational alarm when switching
of the threshing components Xtra capacity
feederhouse Single point multi-coupler and header
connection Header fore/aft tilt angle integrated in
feederhouse Hydraulic actuated mechnical reverser
transmission provides maximum reversing power
Dump-type stone trap 6 Walker combine with 1670mm
channel width 660 mm diameter high inertia
CODE
threshing cylinder with electric actuated concave
500 mm overshot beater ( 600 rpm ) 800 mm diameter
Xtra large Separator (760 or 380 rpm) 2 position
lever-adjusted High Performance Separator (HPS)
grate 400 mm diameter Rear Beater (900 or 450 rpm)
2 position lever-adjusted Rear Beater-grate 7 step
straw walker design Quick engage Boosterbar
Dyna-Flo Plus cleaning system with auger type
preparation system pre-chaffer, chaffer and sieve
elements split chaffer and sieve elements ensure
easy and convenient servicing High Performance
chaffer elements Xtra Fast unloading sytem Full
cover hinged grain tank lids, electrically
operated, single touch operation Advanced grain
loss monitoring system with digital signal
processing auto grain size detection Grain sample
inspection chute Grain tank quick adjustable auger
covers Dual-speed chopper drive (if machine is
equipped with a straw chopper) 4 On-highway
headlights Halogen working lights (4 in the cab ,2
on the rear hood) 2 Stubble lights (mounted at cab
platform) 1 Grain tank and 1 unloading auger lights
3 rotating beacon lights (1 on left cab mirror
bracket, 1 on right hand mirror bracket and 1 on
rear hood) Service light package Includes 5 service
lights (1 located at the engine deck, 1 at the
radiator compartment, 2 underneath left and 1
underneath right hand side panels) and 2 cleaning
shoe lights 800 L diesel tank Loading hooks for
crane
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
248EZ
T670 Level land Combine NA
FT4:
John Deere 9,0 L Dual Turbo PowerTech PSS engine with variable speed fan drive, DOC/DPF
combined with SCR/AOC catalyst technology:
Rated Power "ECE R120" @ 2200RPM (kW/ hp/ PS) 292 / 392 / 397
Peak Power "ECE R120" @ 2000RPM (kW/ hp/ PS) 335 / 449 / 455
Power Boost (kW/ hp/ PS) 25 / 34 / 34
Cooled exhaust gas recirculation (EGR)
Pressurized aftertreatment enclosure with DOC/DPF element and SCR/AOC catalyst
high capacity oil cooler
33 L DEF tank
DESTINATION
27 February 2017 US & Canada
3-COMBINE- 1
402,759.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
North America
0184
Canada
1,309.00
EUstage IV engine
(FT4) max.40km/h travel speed allowed
BH92411 (includes unloading auger flange piece unassembled and crated - Requires Dealer
Installation.) which is included in the base price and will be shipped to you from John Deere
Harvester Works.
0202
United States
1,309.00
EUstage IV engine
(FT4) max.40km/h travel speed allowed
BH92411 (includes unloading auger flange piece unassembled and crated - Requires Dealer
Installation.) which is included in the base price and will be shipped to you from John Deere
Harvester Works.
OPERATOR'S MANUAL AND DECALS
0409
English
In Base Price
1606
2.5 gal water fire extinguisher
FIRE EXTINGUISHER
In Base Price
Amerex Mod 240.
Mandatory for NA.
OPERATOR'S STATION
1121
Premium Cab
In Base Price
Includes premium storage package
Premium cabin isolation kit
Automatic Temperature Control (ClimaTrak)
Actively cooled refrigeration unit
Dual tilt steering column,
Two heated cab mounted mirrors, electrically adjustable
Two-speed and intermittent 2-Blade Windshield wiper and windshield washer
Enhanced cab styling
2x 12V power outlet
RADIO
1412
Basic Radio Package
In Base Price
AM/FM Stereo , Weatherband , Compact Disc Player, Remote Controls, Auxiliary Input Jack
in right hand storage console, two speakers and external antenna.
Includes CD and AUX port and antenna
1413
Premium Radio Package with XM Radio
AM/FM Stereo, Weatherband, Compact Disc Player, with MP3 file support, Remote Controls,
USB port in right hand storage console, Auxiliary Input Jack located in right hand storage
console, Bluetooth capable including microphone, Integrated Bluetooth Phone Book
connection through CommandCenter, Audio-streaming with compatible Bluetooth devices,
XM Satellite capable including Satellite Antenna (Subscription Required), Two Speakers,
Subwoofer, and External Antenna. Volume, Speed Compensation, bass, and treble radio
functions can be viewed and configured on the CommandCenter Display.
SEAT
27 February 2017 US & Canada
3-COMBINE- 2
352.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SEAT ...Continued...
1221
Premium Air Suspension Seat
In Base Price
Operator and instructor seats with cloth cover; Operator seat includes air suspension; fore aft
and lateral attenuation; height adjustment; backrest plus armrest adjustment.
1222
Premium Air Suspension Seat with leather package
2,100.00
Fore aft and lateral attenuation; height adjustment; backrest plus armrest adjustment. In
addition leather covered operator and instructor seat, heated and ventilated operator seat and
leather wrapped steering wheel.
LIGHTING
1360
Standard Lighting
In Base Price
Includes Eight cab roof mounted halogen lamps: Four overhead worklights, two high beam
driving lights, and two low beam driving lights.
1370
Standard lighting and Header Extremity Lights.
152.00
Includes Standard Lights plus two halogen lamps mounted on the lower cab fascia.
1379
LED Lighting Package and Header Extremity Lights
3,562.00
Eight cab roof mounted lights: Four overhead LED worklights, two halogen high beam driving
lights, and two halogen low beam driving lights. Plus two halogen lamps mounted on the lower
cab fascia.
CROP TYPE PACKAGES
4201
Without Crop Option Package (Small Grain Only)
4211
Corn Package
In Base Price
In Configuration
Includes: Feederhouse speed reduction sprocket 15/33 (by-packed)
Requires code 4420 2-speed cylinder drive (Factory installed)
Requires code 8526 Clean grain elevator slip clutch including clean grain elevator steel
paddles (Factory installed)
In corn moistures > 32% we recommend to order the clean grain elevator slid clutch including
the clean grain elevator steel paddles (code 8526)
Stone trap cover plate (by packed) , Cylinder filling plates (by-packed), cleaning shoe fan
brush kit (by packed)
AutoTrac Rowsense activation available by ordering 180E, 180F, 180G or 180H
LOCAL COUNTRY CONFIGURATION
0600
No Edition
In Base Price
DISPLAY
The GreenStar 3 CommandCenter and GreenStar 3 2630 Display provide a central
information system for machine functions and AMS capabilities (See Online Configurator and
Ag Sales Manual for more information). CommandCenter are capable of running AutoTrac
and AutoTrac RowSense only (with appropriate activations purchased and StarFire Receiver
installed). GS3 2630 Displays are capable of all AMS functionality. Includes Access Manager
user lockout software, video capability and armrest bracket. One video camera input
pre-wired in the cab. Connector located on the outside rear of the cab. See Parts for available
cameras or order the respective option code. The GreenStar 3 2630 Display is required for
advanced AMS applications. When utilizing an additional standalone GreenStar Display, ALL
applications must be run on the additional GreenStar Display. See Online Configurator and
Ag Sales Manual for more information. Does not include cornerpost bracket for mounting an
additional GreenStar display.
1823
GreenStar 3 Command Center (Touch 7'' / 18 cm Display)
27 February 2017 US & Canada
3-COMBINE- 3
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DISPLAY ...Continued...
Not compatible with Harvest Doc.
1825
GreenStar 3 2630 Display Mounted on Armrest (10'' / 26 cm Display)
4,635.00
For Harvest Doc the mass flow and moisture sensor is required (not available with code 1800
(Without AutoTrac Ready Wiring Harness) or 1802 (AutoTrac Ready without GreenStar
Harvest monitor))
Enables Remote Display Access, ConnectedCombine, up to 3 Cameras. For HarvestDoc the
mass flow and moisture sensor is required.
AG MANAGEMENT SOLUTIONS
1803
AutoTrac Ready + GreenStar Harvest Monitor
In Base Price
Includes moisture and mass flow sensors
Machine delivered as I combine version if ordered with 0202 or 0184
180A
AutoTrac Complete with Harvest Monitor (SF3 Ready)
11,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation. Harvest
Monitor Complete (includes moisture and mass flow sensors). SF3 provides +/- 3 cm (1.2 in)
horizontal pass-to-pass accuracy with in-season repeatability (where applicable).
A subscription is required for SF3 accuracy. Subscription sold separately via AMS PricePage.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180B
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 License
12,445.00
All regions
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation and 1 Year
SF3 License. Harvest Monitor Complete (includes moisture and mass flow sensors). SF3
provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with in-season repeatability
(where applicable).
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180C
AutoTrac Complete with Harvest Monitor (SF3) and RTK Ready (Modem/Radio not
included)
14,895.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation and RTK
Ready Activation. Harvest Monitor Complete (includes moisture and mass flow sensors). RTK
provides +/- 2.5 cm (1 in) horizontal pass-to-pass accuracy with long-term repeatability. RTK
functionality requires access to differential corrections from an RTK base station and
additional hardware or subscriptions may be required.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180D
AutoTrac Complete with Harvest Monitor (SF1)
all regions
"Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation. Harvest
Monitor Complete (includes moisture and mass flow sensors). Provides access to the
no-charge SF1 differential correction signal. SF1 provides +/- 15 cm (+/- 6 in) horizontal
pass-to-pass accuracy.
An SF3 Ready Activation and License is required for SF3 accuracy. Licenses sold separately
via AMS PricePage.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
27 February 2017 US & Canada
3-COMBINE- 4
7,395.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AG MANAGEMENT SOLUTIONS ...Continued...
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180E
AutoTrac Complete with Harvest Monitor (SF3 Ready) and AutoTrac RowSense
14,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF3 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors). SF3 provides +/- 3 cm
(1.2 in) horizontal pass-to-pass accuracy with in-season repeatability (where applicable).
A subscription is required for SF3 accuracy. Subscription sold separately via AMS PricePage.
AutoTrac RowSense requires a properly equipped head.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
180F
AutoTrac Complete with Harvest Monitor (SF3) plus 1 Year SF3 License and AutoTrac
RowSense
15,445.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and 1 Year SF3 License. Harvest Monitor Complete (includes moisture
and mass flow sensors). SF3 provides +/- 3 cm (1.2 in) horizontal pass-to-pass accuracy with
in-season repeatability (where applicable). AutoTrac RowSense requires a properly equipped
head.
Not compatible with Universal RowSense sensor. Use of this service, and all rights and
obligations of John Deere and the Customer (as identified in the applicable agreement), are
governed by the terms and conditions outlined in the applicable Services and Software
agreements available at www.JohnDeere.com/Agreements. If these terms and conditions are
not agreeable do not proceed and do not use the service.
180G
AutoTrac Complete with Harvest Monitor (SF3) plus RTK ready Activation and AutoTrac
Rowsense
17,895.00
Includes AutoTrac Activation, AutoTrac RowSense Activation, StarFire 6000 Receiver with
SF3 Ready Activation and RTK ready Activation. Harvest Monitor Complete (includes
moisture and mass flow sensors). RTK provides +/- 2.5 cm (1 in) horizontal pass-to-pass
accuracy with long-term repeatability. RTK functionality requires access to differential
corrections from an RTK base station and additional hardware or subscriptions may be
required. AutoTrac RowSense requires a properly equipped head.
Not compatible with Universal RowSense sensor. Use of this service, and all rights and
obligations of John Deere and the Customer (as identified in the applicable agreement), are
governed by the terms and conditions outlined in the applicable Services and Software
agreements available at www.JohnDeere.com/Agreements. If these terms and conditions are
not agreeable do not proceed and do not use the service.
180H
AutoTrac Complete with Harvest Monitor (SF1) and AutoTrac RowSense
10,395.00
Includes AutoTrac Activation, StarFire 6000 Receiver with SF1 Ready Activation, and
AutoTrac RowSense Activation.
Harvest Monitor Complete (includes moisture and mass flow sensors). Provides access to the
no-charge SF1 differential correction signal. SF1 provides +/- 15 cm (+/- 6 in) horizontal
pass-to-pass accuracy.
A separate license is required for SF3 accuracy. License sold separately via AMS PricePage.
AutoTrac RowSense requires a properly equipped head.
Not compatible with Universal RowSense sensor. Use of this service, and all rights and
obligations of John Deere and the Customer (as identified in the applicable agreement), are
governed by the terms and conditions outlined in the applicable Services and Software
agreements available at www.JohnDeere.com/Agreements. If these terms and conditions are
not agreeable do not proceed and do not use the service.
CONNECTIVITY
188U
JDLink Hardware only - Subscription Not Included
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
27 February 2017 US & Canada
3-COMBINE- 5
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
Does not include a JDLink Subscription, Machine Communication Radio and antenna.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Available for customers who do not choose to use the JDLink service and dealers that do not
meet New Model Qualification requirements.
Available to Region 4 dealers who are Phase 0,1,2
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
Available to Region 4 dealers who are Phase 3 and above
1890
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription and
Machine Communication Radio
3,699.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), Ethernet harnesses, and Machine Communication Radio antenna harness,
Machine Communication Radio and antenna.
Note: When Greenstar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
Available to Region 4 dealers who are Phase 3 and above
188S
JDLink Connect 5 Year Subscription
1,600.00
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription,
5 year JDLink Connect subscription, Ethernet harnesses, and Machine
Communication Radio antenna harness.
Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Note: Only available in the United States, Canada through dealers that meet New Model
Qualification requirements.
Available to Region 4 dealers who are Phase 3 and above
1891
JDLink Connect 5 Year subscription and Machine Communication Radio
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 5 year
JDLink Connect subscription, Ethernet harnesses, and Machine Communication Radio
antenna harness, Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable
(order from Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
27 February 2017 US & Canada
3-COMBINE- 6
5,299.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
Available to Region 4 dealers who are Phase 3 and above
MOBILE APPLICATIONS
1951
(SeedStar/Harvest/Apply) Mobile Ready
In Base Price
Includes the wireless data server hardware required for Harvest Mobile functionality. An
Annual subscription is required to enable the use of Harvest Mobile and can be purchased
separately from StellarSupport/JD Marketplace.
1953
WDS with Harvest Mobile 1st Year Subscription
Same Price
Includes the wireless data server hardware and 1st year subscription required for Harvest
Mobile functionality.
TRANSMISSION
2057
Push button shift transmission (PBST) with 30 km/h speed version
In Base Price
Electric shift and electric brake.
2063
ProDrive Transmission 40 km/h speed version
2221
X-steer axle (non powered, 2WD)
12,936.00
REAR AXLE, WHEEL SPINDLES AND 4-WHEEL DRIVE
In Base Price
With Heavy Duty Steering
40mm height adjustability (Levelland only), 85x45mm Steering Cylinder and Heavy Duty
knuckles Recommended for machines equipped with Chaff Spreader
2230
4 WD ready axle
3,188.00
Includes X traction rear axle and the heavy duty steering cylinder. Enables easy and simple
retrofitting of 4WD components by ordered retrofit attachment via parts (only hydraulic motor,
hydraulic plumping, electrical components and mounting parts are required)
2240
X-Traction Axle (Powered, 4WD)
27,012.00
With Heavy Duty Steering.
40mm height adjustability (Levelland only), 85x45mm Steering Cylinder and Heavy Duty
knuckles.
FEEDERHOUSE TYPE
3070
Xtra Capacity Feederhouse - Lateral Tilt frame
In Base Price
With high capacity drive and heavy duty (HD) chain (3HB)
FEEDERHOUSE LIFT CYLINDERS
6070
Feederhouse lift cylinders 70mm + heavy duty tilt cylinder
In Base Price
Required for 630PF; 635PF, 635X and 635R with rape and sunflower attachment.
CONCAVES
4305
Small Grain, Full Wire
988.00
27 February 2017 US & Canada
3-COMBINE- 7
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES ...Continued...
With quick adjustable deawning plates.
Not orderable with 4211 Corn package
4310
Universal Full Wire Concave
In Base Price
With quick adjustable deawning plates.
CYLINDER DRIVES
4420
Dual Range Drive (250-465 rpm and 470-950 rpm)
4813
Standard Cleaning Shoe Sieves, Electric Adjusted
In Base Price
CHAFFER AND SIEVE
In Base Price
STRAW WALKER TYPE
Available Walker Grids:
U = Universal Walker Grid
CCM = CCM Walker Grid
4871
Straw Walker with Welded Grids (1-6) and Bolted Grids (7)
In Base Price
Walker grid configuration: U-U-U-U-U-U-CCM.
GRAIN HANDLING AND UNLOADING
5305
11000L Grain tank 7.20 m (23,5ft) unloading auger
In Base Price
Export/flange version.
STRAW CHOPPERS
5764
Extra Fine Cut Chopper with Serrated Knives
In Base Price
With electrical adjustable deflector, factory installed windpaddels
Does not include the hydraulic chaff spreader.
Hydraulic chaff spreader can be ordered with code 8579
Recommended when operated with 35ft (11,5m) headers and above in side wind conditions
Requires Tailboard code 8582
96 knives for 6 walkers
HITCHES
6400
Without clevis hitch
In Base Price
6777
IF 800/65 R32 CFO 178A8 Michelin CerexBib, Trelleborg TM3000
DRIVE WHEELS, TIRES, AND TRACKS
In Base Price
Maximum machine width W/T6x0: 3.79m
Requires Michelin Brand - Front Tires (code 9663) , Trelleborg Brand - Front Tires (code
9670) or No Brand Preferred - Front Tires (code 9660)
available with 6648, 6644,6628, 6640 Rear tires
6738
IF 800/70 R32 182A8 CFO Michelin CerexBib
500.00
Maximum machine width W/T6x0: 3.79m
Requires Michelin Brand - Front Tires (code 9663)
Available with 6648, 6644, 6628, 6640 Rear Tires
6795
800/70 R32 175A8 CHO Mitas SFT
27 February 2017 US & Canada
3-COMBINE- 8
-1,400.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DRIVE WHEELS, TIRES, AND TRACKS ...Continued...
Maximum machine width W/T6x0: 3.79m
Requires Mitas Brand - Front Tires (code 9679)
available with 6648, 6644, 6628, 6640 Rear Tires
6773
800/65 R32 178A8 Mitas AC70N or Michelin MegaXBib
-3,800.00
Maximum machine width W/T6x0: 3.79m
Mitas Brand - Front Tires (code 9679) or Michelin Brand - Front Tires (code 9663), or no
Brand -Front Tires (9660)
Available with 6619, 6648, 6644, 6628, 6640 Rear Tires
Requires No Brand Preferred - Front Tires (code 9660)
6732
900/60 R32 176A8 Mitas SFT, Michelin MEGAXBIB
700.00
Maximum machine width W/T6x0: 3,99m
Requires Mitas Brand - Front Tires (code 9679), Michelin Brand - Front Tires (code 9663) or
No Brand Preferred - Front Tires (code 9660)
Available with 6648, 6644, 6628, 6629, 6640 Rear Tires
6749
520/85 R42 162A8 Michelin Megaxbib - Duals
-986.00
All parts delivered ex factory including factory bundles (ladder extension, drive shaft
extension, axle extension, lighting extension).
inner tires installed, outer tires factory bundle.
Includes track ready axle.
tires are mounted at 120"(3,04m) and 180"(4,57m) tire spacing.
overall transportation width with dual installed is 5,2m
Only available with 6640, 6628, 6629 Rear tires.
With FT4 engine, requires ProDrive transmission
Requires Michelin Brand - Front Tires (code 9663)
6762
IF520/85R42 CFO R1W 169B Duals
11,684.00
Only available with 6640, 6628, 6629 Rear tires
With FT4 engine, Requires ProDrive transmission
Requires Firestone Brand - Front tires (code 9661)
Only available with beacon lights 8784
6756
580/85R42 R1W Duals 166A8
7,176.00
Only available with 6640, 6628, 6629 Rear tires
With FT4 engine, Requires ProDrive transmission
Only available with beacon lights 8784
Requires Firestone Brand - Front tires (code 9661)
STEERING WHEELS
6648
500/80 R28 176A8 Mitas IMP SFT
-1,664.00
machine rear tire width :
3,49m for W/T6x0 if ordered with 650/75 R32 or 680/85 R32 front tire size
3,79m for W/T6x0 if ordered with 710/75 R34, 800/65 R32 or 800/70 R32 front tire size
3,79m for W/T6x0 if ordered with 900/60R32 front tire size - attention front tire width is larger
(3,99m for W/T6x0) than rear tire width!
Not available with duals
Requires Mitas Brand - Steer Tires (code 9665)
6644
VF 520/80 R26 168A8 Michelin Cerexbib
In Base Price
machine rear tire width :
3,49m for W/T6x0 if ordered with 650/75 R32 or 680/85 R32 front tire size
3,79m for W/T6x0 if ordered with 710/75 R34, 800/65 R32 or 800/70 R32 front tire size
3,79m for W/T6x0 if ordered with 900/60R32 front tire size - attention front tire width is larger
(3,99m for W/T6x0) than rear tire width!
Not available with duals
Requires Michelin Brand - Steer Tires (code 9667)
6628
540/65 R30 168A8 Mitas AC65 IMP
27 February 2017 US & Canada
3-COMBINE- 9
-724.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
STEERING WHEELS ...Continued...
machine rear tire width :
3,79m for W/T6x0 if ordered with 710/75 R34, 800/65 R32 or 800/70 R32 front tire size
3,79m for W/T6x0 if ordered with 900/60R32 front tire size - attention front tire width is larger
(3,99m for W/T6x0) than rear tire width!
if ordered with duals, the rear tires will be mounted at 120'' (3,04m) tire spacing
Requires Mitas Brand - Steer Tires (code 9665)
6629
600/65 R28 168A8 AC65 IMP Mitas
138.00
Machine rear tire width:
3.99m for W/T6x0 if ordered with 710/75 R34, 800/65 R32, 800/70 R32 or 900/60R32 front tire
size
if ordered with duals the rear tires will be mounted at 120'' (3,04m) tire spacing
Requires Mitas Brand - Steer Tires (code 9665)
6640
VF620/70 R26 173A8 Michelin Cerexbib
3,460.00
Machine rear tire width :
3.79m for W/T6x0 if ordered with 710/75 R34, 800/65 R32 or 800/70 R32 front tire size.
3.99m for W/T6x0 if ordered with 900/60R32 front tire size.
if ordered with duals the rear tires will be mounted at 120'' (3,04m) tire spacing
SHIPPING PREPARATION
7710
25 L additional fuel for roll on - roll off shipping
No Charge
OPERATOR'S MANUAL AND DECALS
9013
French OM as additional language
Same Price
Translation of NA version
9049
Parts catalog
Same Price
8133
Curb Mirror Right Hand Side
8143
Profi Light Package
OPERATOR'S STATION
142.00
LIGHTING
304.00
Includes 2 side finder lights and 2 chaff spreader lights (does not include service light
package).
8784
LED Beacon Lights (set of three)
885.00
Standard beacon lights will be replaced by LED type.
CAMERA OBSERVATION SYSTEM
GS3 7' CommandCenter display (code 1821 or 1823) is able to show the input of one camera
only, you can choose 1 camera from the list below 8129-8123-8121 or 8131
If the GS3 2630 display is selected (code 1825) you can select one of the GS3 2630 display
camera packages 8101-8102 or 8109 and optionally also a third camera out of codes
8129-8123-8121 or 8131
8109
2630 Display camera package with unloading auger & rear view system plus grain tank view
system
Includes 1 Camera factory installed at the unloading auger to enable rear view when auger is
swung in and view on the trailer when auger is swung out and 1 Camera factory installed at
grain tank covers to enable grain tank visibility - Camera signal is integrated into the GS3
2630 display; each camera signal can be triggered individually
27 February 2017 US & Canada
3-COMBINE- 10
1,692.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CAMERA OBSERVATION SYSTEM ...Continued...
8123
Rear view System
564.00
1 Camera factory installed at the straw hood to enable rear view visibility; Camera signal is
integrated into Combine Display (integrated into GS3 2630 and GS3)
8129
Unload & Rear view System
564.00
1 Camera factory installed at the unloading auger to enable rear view when auger is swung in
and view on the trailer when auger is swung out; Camera signal is integrated into Combine
Display (integrated into GS3 2630 and GS3)
8131
Grain Tank view System
564.00
1 Camera factory installed at grain tank covers to enable grain tank visibility; Camera signal
is integrated into Combine Display (integrated into GS3 2630 and GS3)
OPERATOR'S STATION
9134
Curb mirror left hand side, bypacked
8531
Heavy duty wear resistance package
143.00
GRAIN HANDLING WEAR PACKAGE
4,206.00
Includes stainless steel components for the following components:
- Cleaning shoe conveyor augers
- Cleaning shoe augers (clean grain cross auger; grain tank filling auger)
- Grain tank cross augers
- Vertical unloading auger
- Unloading auger
- Grain elevator housing
- Grain tank cross auger troughs
- Grain tank discharge housing
- Clean grain elevator auger trough
The heavy duty wear resistance package is recommended if the machine is harvesting in
abrasive conditions. The lifetime is extended by approximately 2.5 times vs. the regular steel
parts.
Recommend to order with Clean Grain Elevator Slip Clutch (code 8526)
TECHNOLOGY
8186
Interactive Combine Adjust (ICA)
8141
Advanced Hydrohandle
No Charge
CONNECTIVITY
158.00
Required in order to operate the 600D header tilt with the joystick
CHAFFER AND SIEVE
8405
Dual Range Fan Drive
428.00
300 - 600 1 per min and 550 - 1350 1 per min.
CONCAVES AND THRESHING
8448
Cylinder slug wrench
380.00
9444
Cylinder filler plates for corn (by-packed)
CONCAVES AND THRESHING
Includes Feederhouse double drive sprocket 15/33 teeth and stone trap cover
27 February 2017 US & Canada
3-COMBINE- 11
340.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONCAVES AND THRESHING ...Continued...
Not with code 4201 without crop type package and code 4211 Corn Package, and not with
4281 Sun flowers package
GRAIN HANDLING
8522
Additional "Full" Grain Tank Sensor
208.00
additional grain tank sensor is mounted on the front side of the grain tank in addition to the
standard sensor mounted on the rear wall of the grain tank. Avoid grain spillage in hilly
conditions
8526
Clean Grain Elevator Slip Clutch
482.00
Including clean grain elevator steel paddles.
Required with code 4271 (Grass Package) or code 4221 (Peas and Soybeans)
Highly recommended in corn conditions with 32% moisture and above in combination with
code 4111 (Corn package)
RESIDUE DISPOSAL
8579
Hydraulic chaff spreader
8480
Sheet located in the rear hood
4,445.00
295.00
To separate chaff from straw flow.
Not available with Chaff Spreader 8579 (Automatically included)
8574
Adjustable windrow deflector rake
295.00
Factory installed.
8582
Tailboard with wide spread vanes
495.00
Recommended when operated with cutting platforms from 30ft. (9m) and above
TIRE BRAND PREFERENCE
Front Tire Brand
9663
Michelin Brand - Front Tires
No Charge
Not orderable with 6752 Tracks ready and not with 9679, 9661, 9670 or 9660
9679
Mitas Brand - Front Tires
No Charge
Not orderable with 6752 Tracks ready and not with 9663, 9661, 9670 or 9660
9661
Firestone Brand - Front tires
No Charge
Only orderable with 6756 or 6762, not with 9663, 9679, 9670 or 9660.
Rear Tire Brand
9665
Mitas Brand - Steer Tires
No Charge
Not orderable with 6600 - without steering wheels and not with 9667 or 9680
9667
Michelin Brand - Steer Tires
No Charge
Not orderable with 6600 - without steering wheels and not with 9665 or 9680
ENGINE
8700
110 Volt engine block heater
27 February 2017 US & Canada
3-COMBINE- 12
68.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ENGINE ...Continued...
8649
Air Compressor
3,065.00
Factory installed.
Includes 60 L air reservoir tank, 3 air take off couplers (1 located on the engine deck; 1
located on the left side near the tool box compartment and 1 located on the right side below the
fuel tank); 10 m hose and 1 air pistol with 125 cm lance; shut off pressure 8 bar; Max. air flow
- 450L /min @ high idle / 250 L/min @ low idle.
8901
Hand wash tank 10 L with soap dispenser
25.00
Removable clear water tank mounted at the cab ladder
ATTACHMENTS FOR FIELD CONVERSION
2-Speed, 4-Wheel Drive Conversions:
BH84076
1886cc 2-Speed, 4-Wheel Drive for Adjustable Rear Axle (PIN 695101 - 730100)
29,978.30
For 9450, 9550, 9550 SideHill, 9650, 9650 CTS, 9560, 9560 SideHill, 9660, 9660 CTS, 9660
WTS, and T670 Combines. 2WD axles have a different wheel bolt pattern than the two-speed,
4WD system. Therefore, 4WD wheel rims from Service Parts are required when converting to
the two-speed, 4WD system. Order two-speed, 4WD rims through Service Parts. Order
AH218390, hydraulic motor, PRW, two-speed, left-hand and AH218391, hydraulic motor,
PRW, two-speed, right-hand through Service Parts. Requires 4WD rims if combine is
equipped with regular-duty spindles.
Cab and Controls:
BXE10283
Electrical adjustable mirrors for MY12 and later T670 Combines
721.60
For superior visibility with electrical adjustable rear view mirrors. Frost and ice free for long
harvesting hours during corn harvest. Installation time: approx. 2.0h.
BH84498
HarvestSmart FEEDRATE CONTROL
10,958.20
For 9660 WTS/T670 Combines. Requires factory software updates installed through dealer
Service advisor.
AXE44569
Horizontal Mobile Mounting Bar (Service)
149.11
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10477
Mobile Mounting Bar
193.60
Any vehicle with MY14 or newer Worldwide Harvesting Cab. For use with BXE10480 and
BXE10479.
BXE10481
Mobile Mounting Bar
216.70
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
AL212605
Mobile Mounting Bar (Service)
133.54
Any vehicle with MY14 or MY15 Worldwide Harvesting Cab.
BXE10479
RAM X-Grip Tablet Mount
116.60
For use on BXE10477.
BXE10480
Slider Clamp
66.00
Slider Clamp that allows for mounting tablets and phones. For use on BXE10477.
AXE44570
Vertical Mobile Mounting Bar (Service)
84.43
Any vehicle with the MY12 or MY13 WorldWide Harvesting Cab.
BXE10281
Xenon lights for MY12 and later T670 Combines
For retrofitting high intensity distance lights to provide up to 200 percent better illumination
during light operation. Installation Time: 2 Hrs.
27 February 2017 US & Canada
3-COMBINE- 13
1,442.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Cleaning:
AH131218
10mm round holes sieve element for lower sieve
674.72
Recommended for small seed or speciality crop harvest when precise sizing of crop material is
required. Installation time: approx. 3h.
AH131216
3mm round holes sieve element for lower sieve
619.63
Recommended for small seed or specialty crop harvest when precise sizing of crop material is
required. Installation time: approx. 3h.
AH131214
3mm round holes sieve for precleaner
421.90
Recommended for small seed or specialty crop harvest when precise sizing of crop material is
required. Installation time: approx. 3h.
BXE10385
CCM Chaffer T670 combine
2,811.60
This bundle includes 2 CCM chaffer elements which replace the standard chaffer elements,
plus tailings auger cover sheets and mounting parts.
In order to get a higher amount of spindles in the grain tank John Deere offers special
CCMchaffers with large 80 mm openings.
CCM chaffers enable bigger cob parts going through the chaffer.
When CCM chaffer is installed at the machine, tailings system must be covered
with tailings auger cover and lower sieve must be removed out of the machine.
The CCM chaffers do not provide remote shoe function.
Due to cleaning shoe air flow reasons do not install CCM elements on precleaner.
Install deep tooth elements on precleaner instead.
BXE10381
Electrical adjustable deep tooth chaffer and precleaner
2,085.60
Includes 2 sieves for pre-cleaner, 2 sieves for chaffer.
High cleaning shoe performance in all conditions
Only for T670 Combines MY14+. Installation time: approx. 1.5h.
AXE29304
High performance chaffer left side
1,217.58
High performance chaff elements provide even and constant air flow and are cable to handle
even heaviest shoe loads in dry or high yielding conditions.
Only for T670 Combines from MY'14+. Installation time: approx. 1.5h.
Note: Please order together with HP precleaner AXE20293.
Note: only available as remote adjustable version.
AXE29303
High performance chaffer right side
1,217.58
High performance chaff elements provide even and constant air flow and are cable to handle
even heaviest shoe loads in dry or high yielding conditions.
Only for T670 Combines MY'14+.Installation time: approx. 1.5h.
Note: Please order together with HP precleaner AXE20293.
Note: only available as remote adjustable version.
AXE20293
High performance precleaner element
High performance precleaner elements provide even and constant air flow and are capable to
handle even heaviest shoe loads in dry or high yielding conditions. The first part of the
precleaner element is fixed mounted at 5 mm clearance - rear part is adjustable from cab. Only
for T670 Combines. Installation time: approx. 3h.
Note: Please order together with HP chaffer AXE20344/AXE20345.
Note: Always order 2 units together to replace standard precleaner elements.
Note: only available as remote adjustable version.
27 February 2017 US & Canada
3-COMBINE- 14
976.33
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10383
Manual adjustable deep tooth chaffer and precleaner
2,085.60
Includes 2 sieves for pre-cleaner, 2 sieves for chaffer.
High cleaning shoe performance in all conditions.
Only for T670 Combines MY14+. Installation time: approx. 1.5h.
BXE10359
Remote cleaning Shoe adjust T670 combine
4,579.30
Precleaner, chaffer and sieve elements are controlled by separate actuator. The adjustment
can be done either from inside the cab or from outside on LH side of the machine.
Upgrade a machine with manual cleaning shoe adjustment to electric adjustment.
Adjust cleaning shoe from inside the cab and react to changing crop conditions to increase
overall machine performance.
BZ13666
Slow cleaning shoe fan speed bundle
1,118.70
The kit is useful when harvesting grass or other light seeds.
Fan speed is reduced from 750 - 1600 RPM to 450 to 1050 RPM.
Note: For T670 combines from SN083845 (MY´09) only:
Change minimum fan speed set point CAB136 to 510 and maximum fan speed set point
CAB137 to 960 in CommandCenter. Installation time: approx. 3h.
Engine:
AH228523
BRUSH KIT, ROTARY SCREEN
256.30
For S550, S650, S660, S670, S680, S690 Combines.
BZ13663
Rotary screen brush kit for Tier III / iT 4 engines
256.30
Provides a clean rotary screen in dry-dusty conditions. Can be used in damp or sticky
conditions. The brush kit (contains 5 brush sections) can be used with either the orifice plate or
the rake bar. Installation time: approx. 2h.
FeederHouse
AXE13446
70mm diameter feeder house lift cylinder
1,043.66
Replace standard 63mm feederhouse lift cylinder with 70mm cylinder to increased lift capacity
for proper lifting of heavy headers. Only for T670 combines.
Note: 70mm lift cylinder is required for 630PF, 635PF or 635R with rape or sunflower
attachment.
AH232851
Drive sprocket 22/26 teeth
237.21
Allows fast and easy adoption of feederhouse speed according to crop.
AXE10874
Feeder house drive sprocket 15/22 teeth
216.40
Use for corn or grass seeds.
Best feeding without risk to damage the conveyor chains.
AZ102572
Heavy duty feeder house chain
1,769.91
Recommended in tough harvesting conditions for all crops.
Longer life time and reduced risk chain breakage.
Only for T670 combines.
BZ13639
Perforated feeder house bottom plate
Recommended when harvesting peas especially in down crop conditions when using
600R/VS/PF header
Dirt will be removed before even entering threshing system which maximizes lifetime of all
chains, augers and elevators.
Only for T670 combines.
27 February 2017 US & Canada
3-COMBINE- 15
1,738.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Grain Handling:
AZ100984
Clean Grain Elevator Cleaning Paddles
297.95
Set contains 3 steel paddles, hardware and instruction to improve cleaning and reduce wear.
BZ13814
Field installation kit for moisture- and mass flow sensor
3,331.90
Includes all parts that are needed to retrofit the mass and moisture sensors.
BXE10398
Grain elevator slip clutch
763.40
Recommended for small grain in high moisture conditions. Reduces risk of belt slippage or
breakage. Only for T670 combines.
BZ100040
Grain tank adoption kit for grass seed harvest
643.50
Includes deflector sheets installed in grain elevator top housing to smoothen transition
between elevator top housing and grain tank filling auger. Prevents plugging and grain
accumulation in the transition area. Recommended for grass harvest. Only for T670 combines.
Note: BZ100040 includes universal U-joint AZ64244 for grain tank filling auger. When
deflector plates are installed yield and moisture sensor are no longer working. It is
recommended to order adjustable grain tank cover´s in addition (BXE10303 - 5 walker;
BXE10304 - 6 walker).
Operator's Station
RE566705
Dual USB Charger
25.96
Allows charging and operating for two devices via USB ports.
Residue Disposal:
BXE10394
Chaff Spreader 6 walker combine
5,485.70
Includes chaff spreader units, hydraulic parts and chaff pan extension for 6 walker combines.
Chaff spreader ensures equal distribution of chaff to both sides, which is highly recommende
for minimum tillage practice. Prevents thick layers of chaff material that can cause uneven
germination during upcoming seeding season.
BXE10331
Drive belt cover for straw chopper drive
900.90
Compatible with T670 combines. Drive belt protection for straw chopper drive. Note: Required
when retrofitting a straw chopper on machines ordered less straw chopper.
BXE10379
Extra-Fine Cut chopper T670 combine
9,749.30
This attachment includes all parts that are needed to retrofit a premium / extra fine cut
chopper on a T670 combine. Wind paddles (BZ100192) can be ordered in addition to provice
more airflow and improve the distribution also in side wind conditions. Note: Please order gas
cylinder in addition, as well as tailboard and the straw door.
BXE10377
Fine Cut chopper T670 combine
Bundle includes fine cut straw chopper with serrated knives and drive parts for straw chopper.
Safety Guards for straw chopper drive belt is not included - must be ordered in addition.
Tailboard must also be ordered in addition. Note: Please order gas cylinder in addition, as
well as tailboard (BXE10375) and safty guaerd for straw chopper drive belt ( BZ13644).
27 February 2017 US & Canada
3-COMBINE- 16
7,066.40
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10113
Residue corn kit for combines (dual speed and premium chopper)
592.90
Kit includes straw hood corn deflector which prevent major damage on straw hood due to corn
cobs being hidden by the knife rotor. It is highly recommended to install the deflector for corn
and sunflower harvest; do not install them for small grain or canola harvest.
In addition chopper housing gets covers with false floor deflector to prevent damage in straw
chopper housing and premature breakage of counter knives.
Note: does not include straw chopper speed reduction for corn or sunflower harvest
Note: to increase lifetime of chopper knives please install corn knives - Z105500 (serrated) /
Z105550 (smooth) with bushing for corn knife - Z105551 (without installed wind paddles) /
Z105552 (with installed wind paddles) - corn knives prevent also premature knife brakeage
due to impacts of corn cobs.
Note: kit can not be installed in machines equipped with standard / fine cut straw chopper
Note: Compatible with T670 Combines only.
BXE10111
Residue corn kit for combines (dual speed and standard chopper)
284.90
Kit includes straw hood corn deflector which prevent major damage on straw hood due to corn
cobs being hidden by the knife rotor. It is highly recommended to install the deflector for corn
and sunflower harvest; do not install them for small grain or canola harvest. Note: Does not
include straw chopper speed reduction for corn or sunflower harvest Note: To increase
lifetime of chopper knives please install corn knives - Z42176 with bushing for corn knife Z42175 - corn knives prevent also premature knife brakeage due to impacts of corn cobs. Note:
kit can not be installed in machines equipped with premium /xtra fine cut straw chopper Note:
Compatible with T670 combines only.
KXE10145
Retrofit dual speed straw chopper drive
2,082.54
Provides chopper speed adjustment from 1800 to 3600RPM and vice versa. Use 1800RPM for
canola, corn or sunflowers and 3600RPM for small grain and other crops.
Note: Compatible with T670 combines from SN0086716 (MY11+).
KXE10083
Speed reduction kit Extra-Fine Cut chopper
1,851.30
Attachment includes pulley and drive belt to reduce straw chopper speed from 3600RPM down
to 1800RPM. Straw walker deflector prevents corn cobs being kicked back against straw
walker or rear hood plus counterknifebank cover is also included to prevent machine damage.
Provides conversion for corn or sunflower harvest.
Note: Only for T670 combines with extra- fine cut chopper.
KXE10086
Speed reduction kit Fine Cut chopper
1,809.50
Attachment includes pulley and drive belt to reduce straw chopper speed from 3600RPM down
to 1800RPM. Straw walker deflector prevents corn cobs being kicked back against straw
walker or rear hood plus counterknifebank cover is also included to prevent machine damage.
Provides conversion for corn or sunflower harvest.
Note: Only for T670 combines with fine cut chopper.
BXE10375
Standard tailboard(man.adjust.) with fine cut straw chopper
1,422.30
Standard tailboard with manual adjustment for T670 machines with fine cut straw chopper.
Bundle includes a complete tailboard assembly ready to upgrade machines without straw
chopper. Note: Order gas cylinder in addition.
BZ100192
BXE10395
Wide Spread Wing Blade Chopper Blades
Windrow Rake Deflector
Includes 2 rake deflectors get installed at rear hood to narrow the windrow width for narrow
size balers. Recommended for narrow size balers (e.g. small square ballers or round balers).
27 February 2017 US & Canada
3-COMBINE- 17
1,020.80
331.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Separating:
AZ63897
Booster bar for T670 combines
707.02
Compatible with T670 combines. Booster bar increases separation capacity at the concave.
Concave nose with integrated rasp bar design provides prethreshing of crop wit minimum
negative impact in grain and straw quality. Recommended in high yielding or green straw
conditions. Note: mounting parts must be ordered separately (order 4x 14M7396, 2x 14M7401,
4x 19M7866, 1x AZ100534.
BZ13631
Cylinder slug wrench
468.60
Compatible with T670 combines only. Cylinder clearing tool to turn threshing cylinder
backwards.
BZ13350
Dual speed cylinder drive
2,326.50
Compatible with T670 combines only. Ensures good grain quality in dry conditions and is
recommended for corn, beans ,peas and rape harvest. Provides cylinder speed from 240-1030
rpm.
BZ100134
Filler plates and stone trap plus feederhouse sprocket
1,327.70
Compatible with T670 combines. Prevents corn cobs or sunflower heads leaving the threshing
compartment unthreshed causing high separator losses. Use the dual teeth feederhouse drive
sprocket (15/22 teeth) to reduce conveyor chain speed to prevent grain damage caused by
feederhouse slats. Stone trap cover plate closes stone trap as it is not required for corn
harvest. Recommended for corn and sunflower harvest.
AH205124
Left Hand Chromed Rasp Bar (set of 5)
756.76
Compatible with T670 combines. Recommended in tough high yielding harvesting conditions
to minimize maintenance time. They are not recommended in dry conditions and low yields as
they can increase kernel breakage during the first 100h - 200h of operation.
BZ100226
Rice concave and rice cylinder for T670 combines
9,736.10
Compatible with T670 combines. Bundle include spike tooth concave and spike tooth threshing
cylinder to harvest rice. Front of concave is equipped with 3 rows of teeth which is used as a
cam to separate the grain. Several units of cover plates are include to open or close concave
rear section to increase separation capacity according on demand or prevent overload of
cleaning shoe.
AH205125
Right Hand Chromed Rasp Bar (set of 5)
756.76
Compatible with T670 combines. Recommended in tough high yielding harvesting conditions
to minimize maintenance time. They are not recommended in dry conditions and low yields as
they can increase kernel breakage during the first 100h - 200h of operation.
BXE10084
Tine Separator Speed Reduction Kit - 300RPM
655.60
Reduces Tine Separator speed from 350 RPM to 300 RPM in lower speed range. Only for
T670 combines from SN088361 (MY'12+)
Ensures more gentle crop handling and less kernel breakage. Highly recommended for corn
and sunflower harvest in dry conditions to ensure excellent grain quality. Note: Requires
installation of BXE10083.
BXE10083
Tine Separator Speed Reduction Kit - 350 RPM
Reduces Tine Separator speed from 450 RPM to 350 RPM in lower speed range. Compatible
with T670 combines from SN088361 (MY'12+). Ensures more gentle crop handling and less
kernel breakage.
Highly recommended for corn and sunflower harvest in dry conditions to ensure excellent
grain quality.
27 February 2017 US & Canada
3-COMBINE- 18
419.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Spacers:
BH92256
Dual Tire Option bundle for T670
Includes axle spacers, ladder extensions, extended marker lights and hardware. If ordering for
dual tire option, rims must be sourced through parts and tires through a tire dealer.
27 February 2017 US & Canada
3-COMBINE- 19
4,757.50
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
T670 Level land Combine NA
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
John Deere 36 In. Combine Tracks with Ag. Belt (Model Year 2017)
Equipment for Base Machine
Only available on S670, S680, and S690 with
ProDrive.
Requires extra heavy duty final drive (base
equipment on S680/S690), 12 In. (300mm) or 16 In.
(400mm) axle extensions, dual (1047mm) ladder
landing extension, and short (1352mm) ladder. All
required parts available through the parts system.
Available in United States, Canada, Australia,
CODE
China and New Zealand.
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
022DH
John Deere 36 In. Combine Tracks with Ag. Belt (Model Year 2017)
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
27 February 2017 US & Canada
3-COMBINE- 1
99,948.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
John Deere 36 In. Combine Tracks with Ag. Belt (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
John Deere 36 In. Combine Tracks with Rice Belt (Model Year 2017)
Equipment for Base Machine
Only available on S670, S680, and S690 with
ProDrive.
Requires extra heavy duty final drive (base
equipment on S680/S690), 12 In. (300mm) or 16 In.
(400mm) axle extensions, dual (1047mm) ladder
landing extension, and short (1352mm) ladder. All
required parts available through the parts system.
Available in United States, Canada, Australia,
CODE
China and New Zealand.
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
023DH
John Deere 36 In. Combine Tracks with Rice Belt (Model Year 2017)
For Combine and Header Compatibility, please utilize the Compatibility Tool available in the
Ag Sales Manual.
27 February 2017 US & Canada
3-COMBINE- 1
99,948.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
John Deere 36 In. Combine Tracks with Rice Belt (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
620F HydraFlex - 20 Ft. (6.10 m) Flex Cutting Platform (Model Year 2017)
Equipment for Base Machine
AUGER:
26 In. Diameter Cross Auger with
Full Width Composite Auger Fingers
Auger Floor Strippers: 625, 630, and 635 Flex
Models
are equipped with two floor strippers
Adjustable Rear Stripper
Auger Flight Extensions (1 Set)
Heavy Duty 26 In. Pitch Auger Flighting
CUTTERBAR:
Bolt-On Coarse Tooth Knife Sections
Heat-Treated and Extended Wear Knife Guards
4 In. Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
True Width Cutterbar
6 In. HydraFlex Float System
HEADER HEIGHT SENSING:
Header Height Sensing in Flex Mode
with Lateral Tilt Sensors
for combine with or without
tilting feederhouse
(Models 630F and 635F)
Hydraulic Fore/Aft Reel Position
Quick-adjust Reel Finger Pitch Adjustment
Reel Reverse feature with 70 Series and S-Series
Combines
Reel Position (Fore/Aft and Height) Resume
Dial-A-Speed Reel Control
DRIVES:
Single In-line Knife Gear Drive System
Single Left Hand Telescoping Header
Connecting Driveshaft
Hydrostatic Reel Drive Motor
Single-Point (Hydraulic and
Electrical) Hookup
MISCELLANEOUS:
Perma-Glide Drive Shield
Perma-Glide Platform Divider Points
Stainless Steel Feed Plates with
Short (23mm) Stone Dams
Platform Mounted Stubble Lights
Road Transport Warning Lights
Poly Skid Shoes
REEL:
Hydraulic Reel Lift with Extended
Height Cylinders
Poly Tine Pickup Reel with
8 In. Center Tube Diameter
(Models 620F, 622F and 625F)
10 In. Center Tube Diameter
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any 600 Series Platform that will be used on combines
prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Refer to the Agricultural Sales Manual for specific ballast information.
942UH
620F HydraFlex - 20 Ft. (6.10 m) Flex Cutting Platform (Model Year 2017)
35,685.00
For S650 and S660.
Requires Code 9979 if Platform is to be used on 9560 STS, 9570 STS, or S550.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
620F HydraFlex - 20 Ft. (6.10 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1310
Auger with Full Width Steel Fingers
1315
Auger with Full Width Composite Fingers
AUGER VERSION
In Base Price
74.00
Not recommended for Rice Harvesting.
Composite Fingers are a wear item. Wear life usually will range from one to two seasons. In
some crop conditions, wear life may be less and depends on crop type conditions and amount
of acres harvested. Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
8540
Spare Knife, One-Piece Coarse Tooth
475.00
8543
Spare Knife, One-Piece Fine Tooth
475.00
8655
Raised Cut Height Skid Shoes
CUTTERBAR
1,648.00
Includes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer or
factory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skid
shoe increases the cutterbar cutting height from 38mm (1.5 In.) to 63mm (2.5 In.). Provides
added protection in field conditions where excessive rocks and other field debris are present or
tall, damp, high residue from double crop operations exists within the low height cutting range
of the 600 Series Flexible cutterbar.
8654
High (57mm) Stone Dam
235.00
Recommended in crop conditions where rocks and other field debris are present in the cutting
area. May affect material flow into cutterbar in very heavy residue or extreme no-till
conditions.
REEL
8262
Less Reel, Mounting, and Drive Parts
-4,065.00
Includes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts not included
HEADER HEIGHT SENSING
9982
Header Height Sensing in Rigid Mode
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 2
2,880.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
620F HydraFlex - 20 Ft. (6.10 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS
9979
Auger Flight and Rear Stripper Extensions Required if Platform is to be Used with a 9560
STS, 9570 STS or S550 Combine
9100
Enhanced Combine Single Point Latching
165.00
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84425
BH84329
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Auger Flight and Rear Stripper Extensions
183.70
For 618R, 620R, 622R, 625R, 630R, 618F, 620F, 622F, 625F, 630F Platforms. Required if
Platform is to be used with a 9560 STS, 9570 STS or S550 Combine.
AH205018
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84622
Header Height Sensing in Rigid Mode
3,199.90
For use on MY10 and prior 600 Series Flex Platforms. Includes sensors and harness.
BXE10119
Header Height Sensing in Rigid Mode
3,199.90
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
BH84278
Lateral Tilt Feederhouse Sensors
376.20
For use on MY10 and prior 600 Series Flex Platforms.
BXE10104
Lateral Tilt Feederhouse Sensors
376.20
For use on MY11 and newer 600 Series Flex Platforms.
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
27 February 2017 US & Canada
3-COMBINE- 3
482.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
620F HydraFlex - 20 Ft. (6.10 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84403
Stone Dams Short (23 mm) for 615F, 618F and 620F
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 4
330.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
622F HydraFlex - 22 Ft. (6.70 m) Flex Cutting Platform (Model Year 2017)
Equipment for Base Machine
AUGER:
26 In. Diameter Cross Auger with
Full Width Composite Auger Fingers
Auger Floor Strippers: 625, 630, and 635 Flex
Models
are equipped with two floor strippers
Adjustable Rear Stripper
Auger Flight Extensions (1 Set)
Heavy Duty 26 In. Pitch Auger Flighting
CUTTERBAR:
Bolt-On Coarse Tooth Knife Sections
Heat-Treated and Extended Wear Knife Guards
4 In. Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
True Width Cutterbar
6 In. HydraFlex Float System
HEADER HEIGHT SENSING:
Header Height Sensing in Flex Mode
with Lateral Tilt Sensors
for combine with or without
tilting feederhouse
(Models 630F and 635F)
Hydraulic Fore/Aft Reel Position
Quick-adjust Reel Finger Pitch Adjustment
Reel Reverse feature with 70 Series and S-Series
Combines
Reel Position (Fore/Aft and Height) Resume
Dial-A-Speed Reel Control
DRIVES:
Single In-line Knife Gear Drive System
Single Left Hand Telescoping Header
Connecting Driveshaft
Hydrostatic Reel Drive Motor
Single-Point (Hydraulic and
Electrical) Hookup
MISCELLANEOUS:
Perma-Glide Drive Shield
Perma-Glide Platform Divider Points
Stainless Steel Feed Plates with
Short (23mm) Stone Dams
Platform Mounted Stubble Lights
Road Transport Warning Lights
Poly Skid Shoes
REEL:
Hydraulic Reel Lift with Extended
Height Cylinders
Poly Tine Pickup Reel with
8 In. Center Tube Diameter
(Models 620F, 622F and 625F)
10 In. Center Tube Diameter
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any 600 Series Platform that will be used on combines
prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Refer to the Agricultural Sales Manual for specific ballast information.
944UH
622F HydraFlex - 22 Ft. (6.70 m) Flex Cutting Platform (Model Year 2017)
37,524.00
For T670, S550, S650, and S660.
Requires Code 9979 if Platform is to be used on 9560 STS, 9570 STS, or S550.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
622F HydraFlex - 22 Ft. (6.70 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1310
Auger with Full Width Steel Fingers
1315
Auger with Full Width Composite Fingers
AUGER VERSION
In Base Price
80.00
Not recommended for Rice Harvesting.
Composite Fingers are a wear item. Wear life usually will range from one to two seasons. In
some crop conditions, wear life may be less and depends on crop type conditions and amount
of acres harvested. Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
8540
Spare Knife, One-Piece Coarse Tooth
518.00
8543
Spare Knife, One-Piece Fine Tooth
518.00
8655
Raised Cut Height Skid Shoes
CUTTERBAR
1,807.00
Includes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer or
factory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skid
shoe increases the cutterbar cutting height from 38mm (1.5 In.) to 63mm (2.5 In.). Provides
added protection in field conditions where excessive rocks and other field debris are present or
tall, damp, high residue from double crop operations exists within the low height cutting range
of the 600 Series Flexible cutterbar.
8654
High (57mm) Stone Dam
235.00
Recommended in crop conditions where rocks and other field debris are present in the cutting
area. May affect material flow into cutterbar in very heavy residue or extreme no-till
conditions.
REEL
8262
Less Reel, Mounting, and Drive Parts
-4,510.00
Includes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts not included
HEADER HEIGHT SENSING
9982
Header Height Sensing in Rigid Mode
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 2
2,880.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
622F HydraFlex - 22 Ft. (6.70 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS
9979
Auger Flight and Rear Stripper Extensions Required if Platform is to be Used with a 9560
STS, 9570 STS or S550 Combine
9100
Enhanced Combine Single Point Latching
165.00
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84425
BH84329
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Auger Flight and Rear Stripper Extensions
183.70
For 618R, 620R, 622R, 625R, 630R, 618F, 620F, 622F, 625F, 630F Platforms. Required if
Platform is to be used with a 9560 STS, 9570 STS or S550 Combine.
AH205018
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84622
Header Height Sensing in Rigid Mode
3,199.90
For use on MY10 and prior 600 Series Flex Platforms. Includes sensors and harness.
BXE10119
Header Height Sensing in Rigid Mode
3,199.90
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
BH84278
Lateral Tilt Feederhouse Sensors
376.20
For use on MY10 and prior 600 Series Flex Platforms.
BXE10104
Lateral Tilt Feederhouse Sensors
376.20
For use on MY11 and newer 600 Series Flex Platforms.
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
622F HydraFlex - 22 Ft. (6.70 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84326
Raised Cut Height Skid Shoes, Flex Platforms 22 Ft., 25 Ft.
3,227.40
Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: Skid
Shoes and End Flex Seals. Recommended for rocky or adverse fields or when high field residue
exits in double crop conditions.
BH84265
BH84404
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 622F and 625F
398.20
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625F HydraFlex - 25 Ft. (7.62 m) Flex Cutting Platform (Model Year 2017)
Equipment for Base Machine
AUGER:
26 In. Diameter Cross Auger with
Full Width Composite Auger Fingers
Auger Floor Strippers: 625, 630, and 635 Flex
Models
are equipped with two floor strippers
Adjustable Rear Stripper
Auger Flight Extensions (1 Set)
Heavy Duty 26 In. Pitch Auger Flighting
CUTTERBAR:
Bolt-On Coarse Tooth Knife Sections
Heat-Treated and Extended Wear Knife Guards
4 In. Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
True Width Cutterbar
6 In. HydraFlex Float System
HEADER HEIGHT SENSING:
Header Height Sensing in Flex Mode
with Lateral Tilt Sensors
for combine with or without
tilting feederhouse
(Models 630F and 635F)
Hydraulic Fore/Aft Reel Position
Quick-adjust Reel Finger Pitch Adjustment
Reel Reverse feature with 70 Series and S-Series
Combines
Reel Position (Fore/Aft and Height) Resume
Dial-A-Speed Reel Control
DRIVES:
Single In-line Knife Gear Drive System
Single Left Hand Telescoping Header
Connecting Driveshaft
Hydrostatic Reel Drive Motor
Single-Point (Hydraulic and
Electrical) Hookup
MISCELLANEOUS:
Perma-Glide Drive Shield
Perma-Glide Platform Divider Points
Stainless Steel Feed Plates with
Short (23mm) Stone Dams
Platform Mounted Stubble Lights
Road Transport Warning Lights
Poly Skid Shoes
REEL:
Hydraulic Reel Lift with Extended
Height Cylinders
Poly Tine Pickup Reel with
8 In. Center Tube Diameter
(Models 620F, 622F and 625F)
10 In. Center Tube Diameter
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any 600 Series Platform that will be used on combines
prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Refer to the Agricultural Sales Manual for specific ballast information.
946UH
625F HydraFlex - 25 Ft. (7.62 m) Flex Cutting Platform (Model Year 2017)
38,738.00
For T670, S550, S650, S660, S670, S680, and S690.
Requires Code 9979 if Platform is to be used on 9560 STS, 9570 STS, or S550.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625F HydraFlex - 25 Ft. (7.62 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1310
Auger with Full Width Steel Fingers
1315
Auger with Full Width Composite Fingers
AUGER VERSION
In Base Price
85.00
Not recommended for Rice Harvesting.
Composite Fingers are a wear item. Wear life usually will range from one to two seasons. In
some crop conditions, wear life may be less and depends on crop type conditions and amount
of acres harvested. Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
8540
Spare Knife, One-Piece Coarse Tooth
574.00
8543
Spare Knife, One-Piece Fine Tooth
574.00
8544
Spare Knife, One-Piece with Long/Short Coarse Tooth Knife Sections
574.00
8546
Fine Tooth Knife
CUTTERBAR
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8545
Long/Short Coarse Sections
No Charge
Available on 625F, 630F and 635F only. Recommended for tough no-till conditions where
large standing cornstalks are present in the cutting area. This code replaces installed knife
with knife equipped with long/short sections.
8655
Raised Cut Height Skid Shoes
2,028.00
Includes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer or
factory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skid
shoe increases the cutterbar cutting height from 38mm (1.5 In.) to 63mm (2.5 In.). Provides
added protection in field conditions where excessive rocks and other field debris are present or
tall, damp, high residue from double crop operations exists within the low height cutting range
of the 600 Series Flexible cutterbar.
8654
High (57mm) Stone Dam
235.00
Recommended in crop conditions where rocks and other field debris are present in the cutting
area. May affect material flow into cutterbar in very heavy residue or extreme no-till
conditions.
REEL
8262
Less Reel, Mounting, and Drive Parts
27 February 2017 US & Canada
3-COMBINE- 2
-4,697.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625F HydraFlex - 25 Ft. (7.62 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
REEL ...Continued...
Includes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts not included
HEADER HEIGHT SENSING
9982
Header Height Sensing in Rigid Mode
2,880.00
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
MISCELLANEOUS
9979
Auger Flight and Rear Stripper Extensions Required if Platform is to be Used with a 9560
STS, 9570 STS or S550 Combine
9100
Enhanced Combine Single Point Latching
165.00
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84425
BH84329
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Auger Flight and Rear Stripper Extensions
183.70
For 618R, 620R, 622R, 625R, 630R, 618F, 620F, 622F, 625F, 630F Platforms. Required if
Platform is to be used with a 9560 STS, 9570 STS or S550 Combine.
AH205018
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84622
Header Height Sensing in Rigid Mode
3,199.90
For use on MY10 and prior 600 Series Flex Platforms. Includes sensors and harness.
BXE10119
Header Height Sensing in Rigid Mode
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 3
3,199.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625F HydraFlex - 25 Ft. (7.62 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH79562
BH84278
Hydraulic Fore/Aft Lines 625F
497.20
Lateral Tilt Feederhouse Sensors
376.20
For use on MY10 and prior 600 Series Flex Platforms.
BXE10104
Lateral Tilt Feederhouse Sensors
376.20
For use on MY11 and newer 600 Series Flex Platforms.
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84326
Raised Cut Height Skid Shoes, Flex Platforms 22 Ft., 25 Ft.
3,227.40
Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: Skid
Shoes and End Flex Seals. Recommended for rocky or adverse fields or when high field residue
exits in double crop conditions.
BH84265
BH84404
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 622F and 625F
398.20
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630F HydraFlex - 30 Ft. (9.14 m) Flex Cutting Platform (Model Year 2017)
Equipment for Base Machine
AUGER:
26 In. Diameter Cross Auger with
Full Width Composite Auger Fingers
Auger Floor Strippers: 625, 630, and 635 Flex
Models
are equipped with two floor strippers
Adjustable Rear Stripper
Auger Flight Extensions (1 Set)
Heavy Duty 26 In. Pitch Auger Flighting
CUTTERBAR:
Bolt-On Coarse Tooth Knife Sections
Heat-Treated and Extended Wear Knife Guards
4 In. Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
True Width Cutterbar
6 In. HydraFlex Float System
HEADER HEIGHT SENSING:
Header Height Sensing in Flex Mode
with Lateral Tilt Sensors
for combine with or without
tilting feederhouse
(Models 630F and 635F)
Hydraulic Fore/Aft Reel Position
Quick-adjust Reel Finger Pitch Adjustment
Reel Reverse feature with 70 Series and S-Series
Combines
Reel Position (Fore/Aft and Height) Resume
Dial-A-Speed Reel Control
DRIVES:
Single In-line Knife Gear Drive System
Single Left Hand Telescoping Header
Connecting Driveshaft
Hydrostatic Reel Drive Motor
Single-Point (Hydraulic and
Electrical) Hookup
MISCELLANEOUS:
Perma-Glide Drive Shield
Perma-Glide Platform Divider Points
Stainless Steel Feed Plates with
Short (23mm) Stone Dams
Platform Mounted Stubble Lights
Road Transport Warning Lights
Poly Skid Shoes
REEL:
Hydraulic Reel Lift with Extended
Height Cylinders
Poly Tine Pickup Reel with
8 In. Center Tube Diameter
(Models 620F, 622F and 625F)
10 In. Center Tube Diameter
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any 600 Series Platform that will be used on combines
prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Refer to the Agricultural Sales Manual for specific ballast information.
948UH
630F HydraFlex - 30 Ft. (9.14 m) Flex Cutting Platform (Model Year 2017)
45,410.00
For T670, S550, S650, S660, S670, S680, and S690.
Requires Code 9979 if Platform is to be used on 9560 STS, 9570 STS, or S550.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630F HydraFlex - 30 Ft. (9.14 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1310
Auger with Full Width Steel Fingers
1315
Auger with Full Width Composite Fingers
AUGER VERSION
In Base Price
96.00
Not recommended for Rice Harvesting.
Composite Fingers are a wear item. Wear life usually will range from one to two seasons. In
some crop conditions, wear life may be less and depends on crop type conditions and amount
of acres harvested. Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
8540
Spare Knife, One-Piece Coarse Tooth
692.00
8543
Spare Knife, One-Piece Fine Tooth
692.00
8544
Spare Knife, One-Piece with Long/Short Coarse Tooth Knife Sections
692.00
8546
Fine Tooth Knife
CUTTERBAR
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8545
Long/Short Coarse Sections
No Charge
Available on 625F, 630F and 635F only. Recommended for tough no-till conditions where
large standing cornstalks are present in the cutting area. This code replaces installed knife
with knife equipped with long/short sections.
8655
Raised Cut Height Skid Shoes
2,411.00
Includes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer or
factory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skid
shoe increases the cutterbar cutting height from 38mm (1.5 In.) to 63mm (2.5 In.). Provides
added protection in field conditions where excessive rocks and other field debris are present or
tall, damp, high residue from double crop operations exists within the low height cutting range
of the 600 Series Flexible cutterbar.
8654
High (57mm) Stone Dam
235.00
Recommended in crop conditions where rocks and other field debris are present in the cutting
area. May affect material flow into cutterbar in very heavy residue or extreme no-till
conditions.
REEL
8262
Less Reel, Mounting, and Drive Parts
27 February 2017 US & Canada
3-COMBINE- 2
-5,578.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630F HydraFlex - 30 Ft. (9.14 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
REEL ...Continued...
Includes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts not included
HEADER HEIGHT SENSING
9982
Header Height Sensing in Rigid Mode
2,880.00
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
MISCELLANEOUS
9979
Auger Flight and Rear Stripper Extensions Required if Platform is to be Used with a 9560
STS, 9570 STS or S550 Combine
9100
Enhanced Combine Single Point Latching
165.00
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84470
3rd Floor Stripper for 630R, 630F and 635F
177.10
For enhanced feeding in small grain crops. Standard equipment on 625R
Platforms S/N 710801 and Up, and 630R Platforms S/N 711046 and Up.
BH84425
BH84329
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Auger Flight and Rear Stripper Extensions
183.70
For 618R, 620R, 622R, 625R, 630R, 618F, 620F, 622F, 625F, 630F Platforms. Required if
Platform is to be used with a 9560 STS, 9570 STS or S550 Combine.
AH205018
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84622
Header Height Sensing in Rigid Mode
For use on MY10 and prior 600 Series Flex Platforms. Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 3
3,199.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630F HydraFlex - 30 Ft. (9.14 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10119
Header Height Sensing in Rigid Mode
3,199.90
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
BH79563
BH84278
Hydraulic Fore/Aft Lines 630F
544.50
Lateral Tilt Feederhouse Sensors
376.20
For use on MY10 and prior 600 Series Flex Platforms.
BXE10104
Lateral Tilt Feederhouse Sensors
376.20
For use on MY11 and newer 600 Series Flex Platforms.
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84327
Raised Cut Height Skid Shoes, Flex Platforms 30 Ft.
3,757.60
Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: Skid
Shoes and End Flex Seals. Recommended for rocky or adverse fields or when high field
residue exits in double crop conditions.
BH84265
BH84405
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 630F
467.50
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635F HydraFlex - 35 Ft. (10.66 m) Flex Cutting Platform (Model Year 2017)
Equipment for Base Machine
AUGER:
26 In. Diameter Cross Auger with
Full Width Composite Auger Fingers
Auger Floor Strippers: 625, 630, and 635 Flex
Models
are equipped with two floor strippers
Adjustable Rear Stripper
Auger Flight Extensions (1 Set)
Heavy Duty 26 In. Pitch Auger Flighting
CUTTERBAR:
Bolt-On Coarse Tooth Knife Sections
Heat-Treated and Extended Wear Knife Guards
4 In. Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
True Width Cutterbar
6 In. HydraFlex Float System
HEADER HEIGHT SENSING:
Header Height Sensing in Flex Mode
with Lateral Tilt Sensors
for combine with or without
tilting feederhouse
(Models 630F and 635F)
Hydraulic Fore/Aft Reel Position
Quick-adjust Reel Finger Pitch Adjustment
Reel Reverse feature with 70 Series and S-Series
Combines
Reel Position (Fore/Aft and Height) Resume
Dial-A-Speed Reel Control
DRIVES:
Single In-line Knife Gear Drive System
Single Left Hand Telescoping Header
Connecting Driveshaft
Hydrostatic Reel Drive Motor
Single-Point (Hydraulic and
Electrical) Hookup
MISCELLANEOUS:
Perma-Glide Drive Shield
Perma-Glide Platform Divider Points
Stainless Steel Feed Plates with
Short (23mm) Stone Dams
Platform Mounted Stubble Lights
Road Transport Warning Lights
Poly Skid Shoes
REEL:
Hydraulic Reel Lift with Extended
Height Cylinders
Poly Tine Pickup Reel with
8 In. Center Tube Diameter
(Models 620F, 622F and 625F)
10 In. Center Tube Diameter
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any 600 Series Platform that will be used on combines
prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Refer to the Agricultural Sales Manual for specific ballast information.
950UH
635F HydraFlex - 35 Ft. (10.66 m) Flex Cutting Platform (Model Year 2017)
51,712.00
For S660, S670, S680, and S690.
Requires 6.85 m (22.5 Ft.) Unloading Auger on combine.
Recommended for use on combines equipped with Lateral Tilt Feederhouse.
For use with the following S-Series Drive Tire options only: 6714, 6753, 6759, 6766, 6780,
6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635F HydraFlex - 35 Ft. (10.66 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1310
Auger with Full Width Steel Fingers
1315
Auger with Full Width Composite Fingers
AUGER VERSION
In Base Price
110.00
Not recommended for Rice Harvesting.
Composite Fingers are a wear item. Wear life usually will range from one to two seasons. In
some crop conditions, wear life may be less and depends on crop type conditions and amount
of acres harvested. Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
8540
Spare Knife, One-Piece Coarse Tooth
806.00
8543
Spare Knife, One-Piece Fine Tooth
806.00
8544
Spare Knife, One-Piece with Long/Short Coarse Tooth Knife Sections
806.00
8546
Fine Tooth Knife
CUTTERBAR
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8545
Long/Short Coarse Sections
No Charge
Available on 625F, 630F and 635F only. Recommended for tough no-till conditions where
large standing cornstalks are present in the cutting area. This code replaces installed knife
with knife equipped with long/short sections.
8655
Raised Cut Height Skid Shoes
2,795.00
Includes skid shoes and end flex seals. Raised Cut Height Skid Shoe is available as a dealer or
factory-installed option on the 600 Series HydraFlex. The 'raised cut height' design of this skid
shoe increases the cutterbar cutting height from 38mm (1.5 In.) to 63mm (2.5 In.). Provides
added protection in field conditions where excessive rocks and other field debris are present or
tall, damp, high residue from double crop operations exists within the low height cutting range
of the 600 Series Flexible cutterbar.
8654
High (57mm) Stone Dam
235.00
Recommended in crop conditions where rocks and other field debris are present in the cutting
area. May affect material flow into cutterbar in very heavy residue or extreme no-till
conditions.
REEL
8262
Less Reel, Mounting, and Drive Parts
27 February 2017 US & Canada
3-COMBINE- 2
-6,555.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635F HydraFlex - 35 Ft. (10.66 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
REEL ...Continued...
Includes Dial-A-Speed sensors and fore/aft hydraulic cylinders. Reel resume parts not included
HEADER HEIGHT SENSING
9982
Header Height Sensing in Rigid Mode
2,880.00
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84470
3rd Floor Stripper for 630R, 630F and 635F
177.10
For enhanced feeding in small grain crops. Standard equipment on 625R
Platforms S/N 710801 and Up, and 630R Platforms S/N 711046 and Up.
BH84425
AH205018
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84622
Header Height Sensing in Rigid Mode
3,199.90
For use on MY10 and prior 600 Series Flex Platforms. Includes sensors and harness.
BXE10119
Header Height Sensing in Rigid Mode
3,199.90
For use on MY11 and newer 600 Series Flex Platforms. Ground contacting height sensors for
automatic height sensing when cutterbar is locked in rigid mode. Includes sensors and harness.
BH84278
Lateral Tilt Feederhouse Sensors
For use on MY10 and prior 600 Series Flex Platforms.
27 February 2017 US & Canada
3-COMBINE- 3
376.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635F HydraFlex - 35 Ft. (10.66 m) Flex Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10104
Lateral Tilt Feederhouse Sensors
376.20
For use on MY11 and newer 600 Series Flex Platforms.
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
BH84406
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 635F
535.70
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
606C 6-Row Corn Head (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
Refer to the Agricultural Sales Manual for specific ballast information.
635PH
606C 6-Row Corn Head (Model Year 2017)
56,433.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
606C 6-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
ROW SPACING
1030
30 In. (76.2 cm) Row Spacing
In Base Price
1036
36 In. (91.44 cm) Row Spacing
Same Price
1038
38 In. (96.52 cm) Row Spacing
Same Price
1027
70 cm (27.5 In.) Row Spacing
Same Price
1029
75 cm (29.5 In.) Row Spacing
Same Price
1515
Non-StalkMaster
CHOPPING
In Base Price
606C for use on S650, S660 and S670 equipped with the Heavy-Duty Variable Speed,
CommandTouch Multi-Speed Drive or High-Torque Fixed Speed Feederhouse Drive. For use
with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766, 6780, 6747,
6769, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
22,702.00
606C StalkMaster for use on S650, S660 and S670 equipped with the Heavy-Duty Variable
Speed, CommandTouch Multi-Speed Drive or High-Torque Fixed Speed Feederhouse Drive.
Not available with Codes 1036 or 1038. Includes Shipping Stand.
606C StalkMaster for use on S650, S660 and S670 equipped with the Heavy-Duty Variable
Speed, CommandTouch Multi-Speed Drive or High-Torque Fixed Speed Feederhouse Drive.
Not available with Codes 1036 or 1038. Includes Shipping Stand. For use with the following
S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766, 6780, 6747, 6769, 6730, 6746,
6751, 6762, 6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
In Base Price
6001
Intermeshing Knife Stalk Rolls, One-piece
Same Price
6002
Opposed Fluted Stalk Rolls, One-piece
Same Price
Not available with Stalkmaster Code 1535.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
MISCELLANEOUS
27 February 2017 US & Canada
3-COMBINE- 2
1,060.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
606C 6-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
9979
Corn Head Stripper Extension - For use on 9560 STS, 9570 STS and S550 Combines Only
174.00
The Stripper Extension is required for use on 9560 STS, 9570 STS and S550 Combines.
Provides additional length to the 600C Series Corn Head Back Stripper Bar, to allow the
Stripper Bar to effectively feed ears of corn to the Feederhouse opening and help eliminate ear
tossing by the Corn Head Cross Auger. Not available on 608C StalkMaster Corn Heads.
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10329
AutoTrac Row Sense Feeler Rods
553.30
70 cm row Spacing
BXE10330
AutoTrac Row Sense Feeler Rods
281.60
75cm row Spacing
BH84542
Corn Head Stripper Extension
193.60
For use on 9560 STS and 9570 STS Combines Only. The Stripper Extension is required for use
on 9560 STS and 9570 STS Combines. Provides additional length to the 600C Series Corn
Head Back Stripper Bar, to allow the Stripper Bar to effectively feed ears of corn to the
Feederhouse opening and help eliminate ear tossing by the Corn Head Cross Auger.
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
606C 6-Row Corn Head (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row Corn Head (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
Refer to the Agricultural Sales Manual for specific ballast information.
636PH
608C 8-Row Corn Head (Model Year 2017)
73,356.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
ROW SPACING
1030
30 In. (76.2 cm) Row Spacing
In Base Price
1036
36 In. (91.44 cm) Row Spacing
Same Price
1038
38 In. (96.52 cm) Row Spacing
Same Price
1027
70 cm (27.5 In.) Row Spacing
Same Price
1029
75 cm (29.5 In.) Row Spacing
Same Price
1515
Non-StalkMaster
CHOPPING
In Base Price
608C for use on S650, S660, S670 and S680 equipped with the Heavy-Duty Variable Speed,
CommandTouch Multi-Speed Drive or High-Torque Fixed Speed Feederhouse Drive. For use
with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766, 6780, 6747,
6769, 6755, 6760 6730, 6746, 6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
26,123.00
608C StalkMaster for use on S660, S670 and S680 equipped with the CommandTouch
Multi-Speed Drive or High-Torque Fixed Speed Feederhouse Drive. Not available with Codes
1036 or 1038. Includes Shipping Stand. For use with the following S-Series Drive Tire options
only: 6714, 6716, 6753, 6759, 6766, 6780, 6747, 6769, 6755, 6760 6730, 6746, 6751, 6762,
6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
In Base Price
6001
Intermeshing Knife Stalk Rolls, One-piece
Same Price
6002
Opposed Fluted Stalk Rolls, One-piece
Same Price
Not available with Stalkmaster Code 1535.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
MISCELLANEOUS
9979
Corn Head Stripper Extension - For use on 9560 STS, 9570 STS and S550 Combines Only
The Stripper Extension is required for use on 9560 STS, 9570 STS and S550 Combines.
Provides additional length to the 600C Series Corn Head Back Stripper Bar, to allow the
27 February 2017 US & Canada
3-COMBINE- 2
174.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
Stripper Bar to effectively feed ears of corn to the Feederhouse opening and help eliminate ear
tossing by the Corn Head Cross Auger. Not available on 608C StalkMaster Corn Heads.
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10329
AutoTrac Row Sense Feeler Rods
553.30
70 cm row Spacing
BXE10330
AutoTrac Row Sense Feeler Rods
281.60
75cm row Spacing
BH84542
Corn Head Stripper Extension
193.60
For use on 9560 STS and 9570 STS Combines Only. The Stripper Extension is required for use
on 9560 STS and 9570 STS Combines. Provides additional length to the 600C Series Corn
Head Back Stripper Bar, to allow the Stripper Bar to effectively feed ears of corn to the
Feederhouse opening and help eliminate ear tossing by the Corn Head Cross Auger.
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row Corn Head (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm) (Model
Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
FOB - Clear Lake, Wisconsin
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
636PXF
608C 8-Row StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm) (Model
Year 2017)
99,480.00
See chopping section for tire compatibility information.
DESTINATION
0202
United States
In Base Price
0409
English
1036
36 In. (91.44 cm) Row Spacing
OPERATOR'S MANUAL
In Base Price
ROW SPACING
27 February 2017 US & Canada
3-COMBINE- 1
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608C 8-Row StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm) (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ROW SPACING ...Continued...
1038
38 In. (96.52 cm) Row Spacing
1535
StalkMaster
Same Price
CHOPPING
In Base Price
608C 36 In. (91.44 cm) and 38 In. (96.52 cm) StalkMaster only for use on S670 and S680
equipped with the CommandTouch Multi-Speed Drive. 80 MM or larger Feederhouse Lift
Cylinders required for 8-Row StalkMaster 36 In. (91.44 cm) and 38 In. (96.52 cm) row
spacing. Includes Shipping Stand. For use with the following S-Series Drive Tire options only:
6714, 6716, 6753, 6759, 6766, 6780, 6747, 6769, 6755, 6760 6730, 6746, 6751, 6762, 6764,
6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
5600
Temporary Surface Rust/Corrosion Protection
In Base Price
TEMPORARY SURFACE RUST PROTECTION
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10329
AutoTrac Row Sense Feeler Rods
553.30
70 cm row Spacing
BXE10330
AutoTrac Row Sense Feeler Rods
281.60
75cm row Spacing
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608FC 8-Row Folding Corn Head - 30 In. (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
CODE
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster and
Non-stalkmaster
Double Telescoping Header Driveshaft
Two automatic couplers for the drive line
MISCELLANEOUS:
Road Transport Warning Lights
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
Jack Stand/Stalk Stompers (one row each side)
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
FOB - Kemper Manufacturing, Germany
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
0340KM
608FC 8-Row Folding Corn Head - 30 In. (Model Year 2017)
92,918.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
0455
English North American
Same Price
0413
French
Same Price
1030
30 In. (76.2 cm) Row Spacing
1515
Non-StalkMaster
ROW SPACING
In Base Price
CHOPPING
In Base Price
608FC for use on S660, S670, S680 and S690; Heavy Duty Variable Speed Drive System, 70
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
608FC 8-Row Folding Corn Head - 30 In. (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CHOPPING ...Continued...
MM Feederhouse Lift Cylinders. Refer to Ag Sales Manual for proper tire and ballast
requirements. For use with the following S-Series Drive Tire options only: 6753, 6766, 6780,
6747, 6769, 6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
26,123.00
608FC for use on S660, S670, S680 and S690; Heavy Duty Variable Speed Drive System, 70
MM Feederhouse Lift Cylinders. Refer to Ag Sales Manual for proper tire and ballast
requirements. For use with the following S-Series Drive Tire options only: 6753, 6766, 6780,
6747, 6769, 6751, 6762, 6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
6001
Intermeshing Knife Stalk Rolls, One-piece
8180
AutoTrac RowSense Sensors
In Base Price
Same Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
OPERATOR'S MANUAL
9013
French - North American Operator's Manual
No Charge
9037
Spanish - North American Operator's Manual
No Charge
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Corn Head (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
Refer to the Agricultural Sales Manual for specific ballast information.
637PH
612C 12-Row Corn Head (Model Year 2017)
112,423.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
ROW SPACING
1030
30 In. (76.2 cm) Row Spacing
In Base Price
1027
70 cm (27.5 In.) Row Spacing
Same Price
1029
75 cm (29.5 In.) Row Spacing
Same Price
1020
20 In. (50.8 cm) Row Spacing
Same Price
1022
22 In. (55.88 cm) Row Spacing
Same Price
1515
Non-StalkMaster
CHOPPING
In Base Price
612C for use on S660, S670, S680 and S690 equipped with the High-Torque Variable Speed,
CommandTouch Multi-Speed or the High-Torque Fixed Speed Feederhouse Drive. 80 MM or
larger Feederhouse Lift Cylinders required 12-Row 30 In. (76.2 cm) row spacing. Not
available with Codes 1027 or 1029. For use with the following S-Series Drive Tire options
only: 6716, 6753, 6759, 6766, 6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764,
6756, 6734.
1535
StalkMaster
37,628.00
612C StalkMaster for use on S670, S680 and S690 equipped with the CommandTouch
Multi-Speed Drive and 80 MM or larger Feederhouse Lift Cylinders are required. For use with
the following S-Series Drive Tire options only: 6753, 6759, 6766, 6780, 6747, 6769, 6755,
6760, 6746, 6751, 6762, 6764, 6756, 6780.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
In Base Price
6001
Intermeshing Knife Stalk Rolls, One-piece
Same Price
6002
Opposed Fluted Stalk Rolls, One-piece
Same Price
Not available with Stalkmaster Code 1535.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
27 February 2017 US & Canada
3-COMBINE- 2
56.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10326
AutoTrac Row Sense Feeler Rods
471.90
20 Inch row Spacing
BXE10327
AutoTrac Row Sense Feeler Rods
573.10
22 Inch row Spacing
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10329
AutoTrac Row Sense Feeler Rods
553.30
70 cm row Spacing
BXE10330
AutoTrac Row Sense Feeler Rods
281.60
75cm row Spacing
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Corn Head (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Non-StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm)
(Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
FOB - Clear Lake, Wisconsin
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
637PXF
612C 12-Row Non-StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm)
(Model Year 2017)
112,423.00
See chopping section for tire compatibility information.
DESTINATION
0202
United States
In Base Price
0409
English
1036
36 In. (91.44 cm) Row Spacing
OPERATOR'S MANUAL
In Base Price
ROW SPACING
27 February 2017 US & Canada
3-COMBINE- 1
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612C 12-Row Non-StalkMaster Corn Head - 36 In. and 38 In. (91.44 cm and 96.52 cm)
(Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ROW SPACING ...Continued...
1038
38 In. (96.52 cm) Row Spacing
1515
Non-StalkMaster
Same Price
CHOPPING
In Base Price
612C 36 In. (91.44 cm) and 38 In. (96.52 cm) Non-StalkMaster for use on S670, S680 and
S690 equipped with the CommandTouch Multi-Speed Drive, the High-Torque Posi-Torque, or
the High-Torque Fixed Speed Feederhouse Drive. 80 MM or larger Feederhouse Lift
Cylinders required for 12-Row Non-StalkMaster 36 In. (91.44 cm) and 38 In. (96.52 cm) row
spacing. For use with the following S-Series Drive Tire options only: 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
5600
Temporary Surface Rust/Corrosion Protection
In Base Price
TEMPORARY SURFACE RUST PROTECTION
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
In Base Price
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10326
AutoTrac Row Sense Feeler Rods
471.90
20 Inch row Spacing
BXE10327
AutoTrac Row Sense Feeler Rods
573.10
22 Inch row Spacing
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10329
AutoTrac Row Sense Feeler Rods
553.30
70 cm row Spacing
BXE10330
AutoTrac Row Sense Feeler Rods
281.60
75cm row Spacing
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612FC 12-Row Folding Corn Head - 30 In. (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
FOB - Clear Lake, Wisconsin
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
638PXF
612FC 12-Row Folding Corn Head - 30 In. (Model Year 2017)
136,305.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
612FC 12-Row Folding Corn Head - 30 In. (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ROW SPACING
1030
30 In. (76.2 cm) Row Spacing
1515
Non-StalkMaster
In Base Price
CHOPPING
In Base Price
612FC for use on S670, S680 and S690; 110kw Heavy Duty Dual Tilt Cylinders, High Torque Variable Speed Drive System, 80 MM or larger Feederhouse Lift Cylinders and Hydraulic
Feederhouse Platform Tilt. Refer to Ag Sales Manual for proper tire and ballast requirements.
For use with the following S-Series Drive Tire options only: 6753, 6766, 6780, 6747, 6769,
6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
37,628.00
612FC StalkMaster for use on S680 and S690 equipped with the ProDrive, CommandTouch
Multi-Speed Drive, 90 MM Feederhouse Lift Cylinders, and Hydraulic Feederhouse Platform
Tilt. Refer to Ag Sales Manual for proper tire and ballast requirements. For use with the
following S-Series Drive Tire options only: 6753, 6766, 6780, 6747, 6769, 6751, 6762, 6764,
6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
6001
Intermeshing Knife Stalk Rolls, One-piece
5600
Temporary Surface Rust/Corrosion Protection
In Base Price
Same Price
TEMPORARY SURFACE RUST PROTECTION
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
616C 16-Row Corn Head (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
Refer to the Agricultural Sales Manual for specific ballast information.
639PH
616C 16-Row Corn Head (Model Year 2017)
148,172.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
616C 16-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
ROW SPACING
1030
30 In. (76.2 cm) Row Spacing
1515
Non-StalkMaster
In Base Price
CHOPPING
In Base Price
616C for use on S670, S680 and S690 equipped with the CommandTouch Multi-Speed
Feederhouse Drive and 80 MM or larger Feederhouse Lift Cylinders are required. For use
with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6780, 6747, 6769, 6755,
6760, 6746, 6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
49,278.00
616C StalkMaster for use on S680 and S690 equipped with the CommandTouch Multi-Speed
Drive and 90 MM Feederhouse Lift Cylinders are required. Includes Shipping Stand. For use
with the following S-Series Drive Tire options only: 6753, 6766, 6780, 6747, 6769, 6755, 6760,
6751, 6762, 6764, 6756, 6734, 6747, 6769, 6755, 6760, 6751, 6762, 6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
In Base Price
6001
Intermeshing Knife Stalk Rolls, One-piece
Same Price
6002
Opposed Fluted Stalk Rolls, One-piece
Same Price
Not available with Stalkmaster Code 1535.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
27 February 2017 US & Canada
3-COMBINE- 2
5.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
616C 16-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10328
AutoTrac Row Sense Feeler Rods
281.60
30 Inch row Spacing
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
616C 16-Row Corn Head (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
618C 18-Row Corn Head (Model Year 2017)
Equipment for Base Machine
AUGER:
18 In. (457 mm) Diameter Auger
26 In. (660 mm) Auger Flighting Pitch with Reverse
Center Flighting
Dual Auger Strippers
(1 adjustable and 1 fixed)
Auger speed 127 RPM
Oil Bath Row Unit Drive with 100 HD Drive Chain
and 1-1/2 In. Driveshaft for all StalkMaster
and 608C, 616C, 618C Non-StalkMaster Corn Heads
Single LH Telescoping Header Driveshaft
(606C and 608C Non-StalkMaster)
Double Telescoping Header Driveshaft
(608C StalkMaster, 612C, 616C, and 618C)
ROW UNITS:
One-Piece Straight Knife Stalk Rolls
Large Profile, Heavy-Duty Gathering Chains
Trash Knives
Full Profile Hard-faced Deck Plates
with Hydraulic Adjustment
Easy-Adjust (no tools) and Easy-Fold
Perma-Glide Deck Covers and End Fenders
Replaceable Wear Strips on Front
Gathering Points
Header Height Sensing/Lateral Tilt
Integral Adjustable (no tools) End
Fender Extensions
MISCELLANEOUS:
Road Transport Warning Lights
Adjustable Mounted Stubble Lights
Easy Cleanout - Auger Floor Cleanout Doors,
Scalloped Self-Cleaning Row Unit Legs
Low Maintenance - Yearly or 200 Hour Service
Interval
The Above Specifications are Indicative of the Base
Feature Machine only and may Differ if Alternative
Options/Attachments are Ordered. Pricing and
Specifications are Recommended only and are Subject
to Change without Notice.
DRIVES:
Gearcase Driven Row Units with Slip Clutch
Oil Bath Row Unit Drive with 80 HD Drive Chain
and 1-1/4 In. Driveshaft for Non-StalkMaster Corn
Heads
606C and 612C Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
Field Conversions may be required on any Model 600C Corn Head that will be used on
combines prior to S Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
A Variable Speed Feederhouse Drive is recommended for Corn Heads.
Combines should be equipped with tires which straddle the corn rows to avoid tire damage.
Refer to the Agricultural Sales Manual for specific ballast information.
646PH
618C 18-Row Corn Head (Model Year 2017)
166,862.00
See chopping section for tire compatibility information.
DESTINATION
0184
Canada
Same Price
0202
United States
0409
English
0437
Spanish
Same Price
0413
French
Same Price
In Base Price
OPERATOR'S MANUAL
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
618C 18-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
ROW SPACING
1020
20 In. (50.8 cm) Row Spacing
1022
22 In. (55.88 cm) Row Spacing
1515
Non-StalkMaster
In Base Price
Same Price
CHOPPING
In Base Price
618C for use on S670, S680 and S690 equipped with CommandTouch Multi-Speed
Feederhouse Drive and 80 MM or larger Feederhouse Lift Cylinders are required. For use
with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6780, 6747, 6769, 6755,
6760, 6746, 6751, 6762, 6764, 6756, 6734.
1535
StalkMaster
55,808.00
618C StalkMaster for use on S680 and S690 equipped with the CommandTouch Multi-Speed
Drive and 90 MM Feederhouse Lift Cylinders are required. Includes Shipping Stand. For use
with the following S-Series Drive Tire options only: 6753, 6766, 6780, 6747, 6769, 6755, 6760,
6751, 6762, 6764, 6756, 6734, 6747, 6769, 6755, 6760, 6751, 6762, 6764, 6756, 6734.
STALK ROLLS
6000
Opposed Knife Stalk Rolls, One-piece
In Base Price
6001
Intermeshing Knife Stalk Rolls, One-piece
Same Price
6002
Opposed Fluted Stalk Rolls, One-piece
Same Price
Not available with Stalkmaster Code 1535.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
183.00
Required for protection of platform from road salt corrosion during transport from Factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8180
AutoTrac RowSense Sensors
In Base Price
MECHANICAL ROWSENSE
1,060.00
Due to potential damage during shipping, Sensors will be shipped with the machine for field
installation. All other components will be installed at the factory. Not available with Code
1036 (36" [91.44 cm] Row Spacing) or 1038 (38" [96.52 cm] Row Spacing) .
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
27 February 2017 US & Canada
3-COMBINE- 2
61.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
618C 18-Row Corn Head (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BXE10326
AutoTrac Row Sense Feeler Rods
471.90
20 Inch row Spacing
BXE10327
AutoTrac Row Sense Feeler Rods
573.10
22 Inch row Spacing
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
BXE10423
Storage Stand
237.60
27 February 2017 US & Canada
3-COMBINE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
618C 18-Row Corn Head (Model Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630FD - HydraFlex 30 Ft. (9.14 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
Equipment for Base Machine
CUTTERBAR:
True Width Cutterbar
7.5 In. HydraFlex Float System
Coarse Tooth 4 In. Double Cut Knife System with
Screw Adjustable Knife Hold-downs
Heat-Treated and High Wear Extended Wear Knife
Guards
HEIGHT CONTROL AND FEEDING:
Header Height Sensing in Flex Mode
Wider center section (7.9 inches wider)
16 In. Feed Drum with Triple Chevron finger pattern
Stainless Steel Feed Floor
REEL:
Two-Piece, Poly Tine Pickup Reel with
6 In. Tube (Model 640FD)
8 in. Tube (Model 645FD)
One-Piece, Poly Tine Pickup Reel with
10 In. Tube (Model 630FD, 635FD)
Dial-A-Speed Reel Control
Hydraulic Fore/Aft Reel Control
Hydraulic Reel Lift with Extended Height Cylinders
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Belt Reverse feature when used with
70 Series and S-Series Combines
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
Telescoping Header Connecting Driveshaft
Straight-Line Dual Knife Drive Shaft Driven System
(630FD-645FD)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. Wide Side Draper Belts with Speed Sensor and
Integrated Belt Protection System
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and Electrical Hookup)
MISCELLANEOUS:
Perma-Glide Platform Divider Point
Full Width Poly Skid Shoes
Centered Frame
Quick-Latch Center Belt Bottom Cleanout Door
Stubble Lights
Road Transport Warning Lights (for Harvester Works
- East Moline manufactured units)
DRIVES:
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
600FD Series Draper Cutting Platforms for Combines
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Lateral Tilt Feederhouse required for 630FD, 635FD and 640FD Draper Platforms.
Integrated Transport System not an Option. Recommend purchase of Frontier Header Trailer
for transport.
Refer to the Agricultural Sales Manual for specific ballast information.
166GH
630FD - HydraFlex 30 Ft. (9.14 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
97,307.00
Recommended for use on the S660, S670, S680, and S690 Combines.
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6769, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630FD - HydraFlex 30 Ft. (9.14 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL
0409
English Operator's Manual
In Base Price
0437
Spanish Operator's Manual
Same Price
0413
French Operator's Manual
Same Price
0900
Less Dual Knife Drive
KNIFE DRIVE
-5,721.00
Avaliable on the 630FD.
0905
Dual Knife Drive
In Base Price
Avaliable on the 630FD for rice and tough cutting conditions. Required on the 635FD, 640FD,
and 645FD.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Recommended for protection of platform from road salt corrosion during transport from
factory in winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
1005
Poly Tine Pickup Reel
In Base Price
REEL
In Base Price
One piece Center Reel Arm - 10 In. (25.4 cm) Center Tube Diameter.
1006
Steel Tine 42 In. (106.68 cm) Diameter Pickup Reel
1,615.00
For tough feeding crops.
CUTTERBAR
8540
Coarse Tooth Knife with Short - Long Sections
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8546
Fine Tooth Knife
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8541
LH and RH Coarse Tooth Section Spare Knives
1,142.00
8542
LH and RH Fine Tooth Section Spare Knives
1,142.00
8543
LH and RH Coarse Tooth Knife with Short - Long Section Spare Knives
1,142.00
8452
Reel Flip-Over System
REEL
2,681.00
Recommended to reduce reel wrapping for tall crops that are tough to convey.
HEADER HEIGHT SENSING
8658
Increased Cut Height Skid Shoes
27 February 2017 US & Canada
3-COMBINE- 2
2,511.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630FD - HydraFlex 30 Ft. (9.14 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
HEADER HEIGHT SENSING ...Continued...
8451
Header Height Sensing in Rigid Mode
2,901.00
Ground contacting height sensing when cutterbar is locked in rigid mode.
Includes sensors and harness.
AUGER VERSION
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
9690
Top Crop Conveying Auger
6,055.00
Recommended for operation in bushy or high-volume harvesting conditions.
9978
Feed Drum Deflectors
267.00
For use with 9570 STS and S550 Combine.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017.
Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10320
Narrow Body Deflectors
For 630FD Platforms.
27 February 2017 US & Canada
3-COMBINE- 3
293.70
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630FD - HydraFlex 30 Ft. (9.14 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600FD Series HydraFlex Draper Platforms:
Field Conversions required on any Model 600FD Series HydraFlex Draper Platform that will
be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10408
Feed Drum Anti-Wrap Bundle
523.60
Recommended for tall, damp crop conditions to reduce drum wrapping. (Serial Number
765000-)
BXE10738
Header Height Sensing in Rigid Mode (Model Year 2015 and older 630FD, 635FD, and
640FD)
1,780.90
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10781
Header Height Sensing in Rigid Mode (Model Year 2016 630FD, 635FD, 640FD and Model
Year 2015 645FD)
2,373.80
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10319
Top Crop Conveying Auger
6,658.30
For 630FD Platforms.
BXE10762
Top Crop Conveying Auger
For use on Model Year 2016 and newer 630FD and 635FD.
27 February 2017 US & Canada
3-COMBINE- 4
6,658.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635FD - HydraFlex 35 Ft. (10.66 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Equipment for Base Machine
CUTTERBAR:
True Width Cutterbar
7.5 In. HydraFlex Float System
Coarse Tooth 4 In. Double Cut Knife System with
Screw Adjustable Knife Hold-downs
Heat-Treated and High Wear Extended Wear Knife
Guards
HEIGHT CONTROL AND FEEDING:
Header Height Sensing in Flex Mode
Wider center section (7.9 inches wider)
16 In. Feed Drum with Triple Chevron finger pattern
Stainless Steel Feed Floor
REEL:
Two-Piece, Poly Tine Pickup Reel with
6 In. Tube (Model 640FD)
8 in. Tube (Model 645FD)
One-Piece, Poly Tine Pickup Reel with
10 In. Tube (Model 630FD, 635FD)
Dial-A-Speed Reel Control
Hydraulic Fore/Aft Reel Control
Hydraulic Reel Lift with Extended Height Cylinders
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Belt Reverse feature when used with
70 Series and S-Series Combines
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
Telescoping Header Connecting Driveshaft
Straight-Line Dual Knife Drive Shaft Driven System
(630FD-645FD)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. Wide Side Draper Belts with Speed Sensor and
Integrated Belt Protection System
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and Electrical Hookup)
MISCELLANEOUS:
Perma-Glide Platform Divider Point
Full Width Poly Skid Shoes
Centered Frame
Quick-Latch Center Belt Bottom Cleanout Door
Stubble Lights
Road Transport Warning Lights (for Harvester Works
- East Moline manufactured units)
DRIVES:
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
600FD Series Draper Cutting Platforms for Combines
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Lateral Tilt Feederhouse required for 630FD, 635FD and 640FD Draper Platforms.
Integrated Transport System not an Option. Recommend purchase of Frontier Header Trailer
for transport.
Refer to the Agricultural Sales Manual for specific ballast information.
644GH
635FD - HydraFlex 35 Ft. (10.66 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
101,548.00
Recommended for use on S660, S670, S680, and S690 Combines.
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
For use with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6780, 6747,
6769, 6755, 6760, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635FD - HydraFlex 35 Ft. (10.66 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL
0409
English Operator's Manual
In Base Price
0437
Spanish Operator's Manual
Same Price
0413
French Operator's Manual
Same Price
0905
Dual Knife Drive
KNIFE DRIVE
In Base Price
Avaliable on the 630FD for rice and tough cutting conditions. Required on the 635FD, 640FD,
and 645FD.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Recommended for protection of platform from road salt corrosion during transport from
factory in winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
1005
Poly Tine Pickup Reel
In Base Price
REEL
In Base Price
One piece Center Reel Arm - 10 In. (25.4 cm) Center Tube Diameter.
CUTTERBAR
8540
Coarse Tooth Knife with Short - Long Sections
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8546
Fine Tooth Knife
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8541
LH and RH Coarse Tooth Section Spare Knives
1,254.00
8542
LH and RH Fine Tooth Section Spare Knives
1,254.00
8543
LH and RH Coarse Tooth Knife with Short - Long Section Spare Knives
1,254.00
8452
Reel Flip-Over System
REEL
2,681.00
Recommended to reduce reel wrapping for tall crops that are tough to convey.
HEADER HEIGHT SENSING
8658
Increased Cut Height Skid Shoes
2,790.00
8451
Header Height Sensing in Rigid Mode
2,901.00
Ground contacting height sensing when cutterbar is locked in rigid mode.
Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635FD - HydraFlex 35 Ft. (10.66 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AUGER VERSION
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
9690
Top Crop Conveying Auger
6,514.00
Recommended for operation in bushy or high-volume harvesting conditions.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017.
Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10262
Reel Flip-Over Bundle for 625, 630, 635D (Model Year 2008 or Newer) and 630FD, 635FD
(Model Year 2012#2015)
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
27 February 2017 US & Canada
3-COMBINE- 3
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635FD - HydraFlex 35 Ft. (10.66 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600FD Series HydraFlex Draper Platforms:
Field Conversions required on any Model 600FD Series HydraFlex Draper Platform that will
be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10039
Feed Drum Anti-Wrap Bundle
523.60
Recommended for tall, damp crop conditions to reduce drum wrapping.
BXE10408
Feed Drum Anti-Wrap Bundle
523.60
Recommended for tall, damp crop conditions to reduce drum wrapping. (Serial Number
765000-)
BXE10738
Header Height Sensing in Rigid Mode (Model Year 2015 and older 630FD, 635FD, and
640FD)
1,780.90
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10781
Header Height Sensing in Rigid Mode (Model Year 2016 630FD, 635FD, 640FD and Model
Year 2015 645FD)
2,373.80
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10034
Top Crop Conveying Auger
7,360.10
For use on 635FD and 640FD. Recommended for operation in bushy or high-volume
harvesting conditions.
BXE10762
Top Crop Conveying Auger
For use on Model Year 2016 and newer 630FD and 635FD.
27 February 2017 US & Canada
3-COMBINE- 4
6,658.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640FD - HydraFlex 40 Ft. (12.19 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Equipment for Base Machine
CUTTERBAR:
True Width Cutterbar
7.5 In. HydraFlex Float System
Coarse Tooth 4 In. Double Cut Knife System with
Screw Adjustable Knife Hold-downs
Heat-Treated and High Wear Extended Wear Knife
Guards
HEIGHT CONTROL AND FEEDING:
Header Height Sensing in Flex Mode
Wider center section (7.9 inches wider)
16 In. Feed Drum with Triple Chevron finger pattern
Stainless Steel Feed Floor
REEL:
Two-Piece, Poly Tine Pickup Reel with
6 In. Tube (Model 640FD)
8 in. Tube (Model 645FD)
One-Piece, Poly Tine Pickup Reel with
10 In. Tube (Model 630FD, 635FD)
Dial-A-Speed Reel Control
Hydraulic Fore/Aft Reel Control
Hydraulic Reel Lift with Extended Height Cylinders
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Belt Reverse feature when used with
70 Series and S-Series Combines
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
Telescoping Header Connecting Driveshaft
Straight-Line Dual Knife Drive Shaft Driven System
(630FD-645FD)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. Wide Side Draper Belts with Speed Sensor and
Integrated Belt Protection System
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and Electrical Hookup)
MISCELLANEOUS:
Perma-Glide Platform Divider Point
Full Width Poly Skid Shoes
Centered Frame
Quick-Latch Center Belt Bottom Cleanout Door
Stubble Lights
Road Transport Warning Lights (for Harvester Works
- East Moline manufactured units)
DRIVES:
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
600FD Series Draper Cutting Platforms for Combines
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Lateral Tilt Feederhouse required for 630FD, 635FD and 640FD Draper Platforms.
Integrated Transport System not an Option. Recommend purchase of Frontier Header Trailer
for transport.
Refer to the Agricultural Sales Manual for specific ballast information.
645GH
640FD - HydraFlex 40 Ft. (12.19 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
108,254.00
Recommended for use on S670, S680, and S690 Combines, with 26 Ft. (7.92 m) unloading
auger length.
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
For use with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6780, 6747,
6769, 6755, 6760, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
Same Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640FD - HydraFlex 40 Ft. (12.19 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0202
United States
In Base Price
0409
English Operator's Manual
0437
Spanish Operator's Manual
0905
Dual Knife Drive
OPERATOR'S MANUAL
In Base Price
Same Price
KNIFE DRIVE
In Base Price
Avaliable on the 630FD for rice and tough cutting conditions. Required on the 635FD, 640FD,
and 645FD.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Recommended for protection of platform from road salt corrosion during transport from
factory in winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
1005
Poly Tine Pickup Reel
In Base Price
REEL
In Base Price
Two piece Center Reel Arm - 6 In. (15.24 cm) Center Tube Diameter.
CUTTERBAR
8540
Coarse Tooth Knife with Short - Long Sections
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8546
Fine Tooth Knife
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8541
LH and RH Coarse Tooth Section Spare Knives
1,366.00
8542
LH and RH Fine Tooth Section Spare Knives
1,366.00
8543
LH and RH Coarse Tooth Knife with Short - Long Section Spare Knives
1,366.00
8452
Reel Flip-Over System
REEL
2,681.00
Recommended to reduce reel wrapping for tall crops that are tough to convey.
HEADER HEIGHT SENSING
8658
Increased Cut Height Skid Shoes
3,068.00
8451
Header Height Sensing in Rigid Mode
2,901.00
Ground contacting height sensing when cutterbar is locked in rigid mode.
Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640FD - HydraFlex 40 Ft. (12.19 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AUGER VERSION
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
9690
Top Crop Conveying Auger
6,514.00
Recommended for operation in bushy or high-volume harvesting conditions.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017.
Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10263
Reel Flip-Over Bundle for 640D (Model Year 2008 or Newer) and 640FD (Model Year 2012
# 2015)
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
27 February 2017 US & Canada
3-COMBINE- 3
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640FD - HydraFlex 40 Ft. (12.19 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600FD Series HydraFlex Draper Platforms:
Field Conversions required on any Model 600FD Series HydraFlex Draper Platform that will
be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10039
Feed Drum Anti-Wrap Bundle
523.60
Recommended for tall, damp crop conditions to reduce drum wrapping.
BXE10408
Feed Drum Anti-Wrap Bundle
523.60
Recommended for tall, damp crop conditions to reduce drum wrapping. (Serial Number
765000-)
BXE10738
Header Height Sensing in Rigid Mode (Model Year 2015 and older 630FD, 635FD, and
640FD)
1,780.90
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10781
Header Height Sensing in Rigid Mode (Model Year 2016 630FD, 635FD, 640FD and Model
Year 2015 645FD)
2,373.80
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10034
Top Crop Conveying Auger
7,360.10
For use on 635FD and 640FD. Recommended for operation in bushy or high-volume
harvesting conditions.
BXE10763
Top Crop Conveying Auger
For use on Model Year 2016 and newer 640FD and Model Year 2015 and newer 645FD.
27 February 2017 US & Canada
3-COMBINE- 4
7,360.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
645FD - HydraFlex 45 Ft. (13.71 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Equipment for Base Machine
CUTTERBAR:
True Width Cutterbar
7.5 In. HydraFlex Float System
Coarse Tooth 4 In. Double Cut Knife System with
Screw Adjustable Knife Hold-downs
Heat-Treated and High Wear Extended Wear Knife
Guards
HEIGHT CONTROL AND FEEDING:
Header Height Sensing in Flex Mode
Wider center section (7.9 inches wider)
16 In. Feed Drum with Triple Chevron finger pattern
Stainless Steel Feed Floor
REEL:
Two-Piece, Poly Tine Pickup Reel with
6 In. Tube (Model 640FD)
8 in. Tube (Model 645FD)
One-Piece, Poly Tine Pickup Reel with
10 In. Tube (Model 630FD, 635FD)
Dial-A-Speed Reel Control
Hydraulic Fore/Aft Reel Control
Hydraulic Reel Lift with Extended Height Cylinders
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Belt Reverse feature when used with
70 Series and S-Series Combines
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
Telescoping Header Connecting Driveshaft
Straight-Line Dual Knife Drive Shaft Driven System
(630FD-645FD)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. Wide Side Draper Belts with Speed Sensor and
Integrated Belt Protection System
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and Electrical Hookup)
MISCELLANEOUS:
Perma-Glide Platform Divider Point
Full Width Poly Skid Shoes
Centered Frame
Quick-Latch Center Belt Bottom Cleanout Door
Stubble Lights
Road Transport Warning Lights (for Harvester Works
- East Moline manufactured units)
DRIVES:
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois
600FD Series Draper Cutting Platforms for Combines
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
Lateral Tilt Feederhouse required for 630FD, 635FD and 640FD Draper Platforms.
Integrated Transport System not an Option. Recommend purchase of Frontier Header Trailer
for transport.
Refer to the Agricultural Sales Manual for specific ballast information.
08SGH
645FD - HydraFlex 45 Ft. (13.71 m) Centered Flexible Draper Cutting Platform (Model Year
2017)
114,749.00
Recommended for use on S680 and S690 Combines, with 28.5 Ft. (8.68 m) unloading auger
length. Requires Heavy Duty Fore Aft Feederhouse.
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
For use with the following S-Series Drive Tire options only: 6753, 6766, 6780, 6747, 6769,
6755, 6760, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
Same Price
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
645FD - HydraFlex 45 Ft. (13.71 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0202
United States
In Base Price
0409
English Operator's Manual
0437
Spanish Operator's Manual
0905
Dual Knife Drive
OPERATOR'S MANUAL
In Base Price
Same Price
KNIFE DRIVE
In Base Price
Avaliable on the 630FD for rice and tough cutting conditions. Required on the 635FD, 640FD,
and 645FD.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Recommended for protection of platform from road salt corrosion during transport from
factory in winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
1005
Poly Tine Pickup Reel
In Base Price
REEL
In Base Price
Two piece Center Reel Arm - 8 In. (20.32 cm) Center Tube Diameter.
CUTTERBAR
8540
Coarse Tooth Knife with Short - Long Sections
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8546
Fine Tooth Knife
No Charge
Factory installed option replacing Coarse Knife in base equipment.
8541
LH and RH Coarse Tooth Section Spare Knives
1,478.00
8542
LH and RH Fine Tooth Section Spare Knives
1,478.00
8543
LH and RH Coarse Tooth Knife with Short - Long Section Spare Knives
1,478.00
8452
Reel Flip-Over System
REEL
2,681.00
Recommended to reduce reel wrapping for tall crops that are tough to convey.
HEADER HEIGHT SENSING
8658
Increased Cut Height Skid Shoes
3,348.00
8451
Header Height Sensing in Rigid Mode
2,901.00
Ground contacting height sensing when cutterbar is locked in rigid mode.
Includes sensors and harness.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
645FD - HydraFlex 45 Ft. (13.71 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AUGER VERSION
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
9690
Top Crop Conveying Auger
6,514.00
Recommended for operation in bushy or high-volume harvesting conditions.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017.
Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
ATTACHMENTS FOR FIELD CONVERSION
600FD Series HydraFlex Draper Platforms:
Field Conversions required on any Model 600FD Series HydraFlex Draper Platform that will
be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10781
Header Height Sensing in Rigid Mode (Model Year 2016 630FD, 635FD, 640FD and Model
Year 2015 645FD)
2,373.80
Ground contacting height sensing when cutterbar is locked in rigid mode. Includes sensors and
harness.
BXE10763
Top Crop Conveying Auger
For use on Model Year 2016 and newer 640FD and Model Year 2015 and newer 645FD.
27 February 2017 US & Canada
3-COMBINE- 3
7,360.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
645FD - HydraFlex 45 Ft. (13.71 m) Centered Flexible Draper Cutting Platform (Model
Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
615P - 15 Ft. (4.57 m) Belt Pickup Platform with 179 In. (454.66 cm) Belt Pickup (Model
Year 2017)
Equipment for Base Machine
PICKUP:
15 Ft. Pickup Platform
600 Series rigid platform frame
Dual Belt Pickup Unit
Fixed Position Pickup Unit
Fixed Gauge Wheels
26 In. Diameter Floating Cross Auger
with 20 In. Pitch Flight
Steel Auger Fingers
FieldGlide Active Pickup Suspension System
Plastic Pickup Fingers
44 In. Pickup Belts
Hydraulic Adjustable Windscreen
Optimum BPU to Feederhouse Floor Geometry
Floor Strippers
Adjustable Rear Strippers
Rear Stripper Extensions
Integral Slip Clutch
Left Hand Telescoping Header Connecting
Shaft (for use with narrow and wide-body
combines, including Sidehill combines)
Single-Point (Electrical and
Hydraulic Hookup)
Left Hand Hydraulic Pickup Belt Drive
MISCELLANEOUS:
20-10.00 6PR Gauge Wheels & Tires
Perma-Glide Platform End Shields
Road Transport Warning Lights
Dial-A-Speed (automatic belt speed adjust)
Standard Header Height Sensing
DRIVES:
Left Hand Mechanical Auger Drive with
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois Field Conversions may be required on any Model 615 Series
Belt Pickup Platform that will be used on combines prior to 70 Series. Refer to the Product
Compatibility Tool and/or Agricultural Sales Manual for specific information and
compatibility requirements.
951CH
615P - 15 Ft. (4.57 m) Belt Pickup Platform with 179 In. (454.66 cm) Belt Pickup (Model
Year 2017)
30,230.00
For T670, S550, S650, S660, S670, S680, and S690.
This price does NOT include the Mandatory and Recommended Optional Ordering codes.
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6780, 6747, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0202
United States
In Base Price
0184
Canada
0409
English Operator's Manual
No Charge
0413
French Operator's Manual
No Charge
1300
Auger with Steel Fingers
1305
Auger with Composite Fingers
Same Price
OPERATOR'S MANUAL
AUGER VERSION
Composite Fingers are a wear item. Wear life will usually range from one to two seasons.
27 February 2017 US & Canada
3-COMBINE- 1
In Base Price
77.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
615P - 15 Ft. (4.57 m) Belt Pickup Platform with 179 In. (454.66 cm) Belt Pickup (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
AUGER VERSION ...Continued...
However, in some situations, wear life may be less and will depend on crop type conditions
and amount of acreage harvested. The Composite Fingers are not a warranty item.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection. (Not available for Export)
In Base Price
DRIVE SHAFT
Field Conversions may be required on any Model 615 Series Belt Pickup Platform that will be
used on combines prior to 70 Series. Refer to the Product Compatibility Tool and/or
Agricultural Sales Manual for specific information and compatibility requirements.
8258
Telescoping Drive Shaft (for Export only)
70.00
Required for use on HillMaster Combines.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017.
Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
BH84403
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 615F, 618F and 620F
330.00
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
615P - 15 Ft. (4.57 m) Belt Pickup Platform with 179 In. (454.66 cm) Belt Pickup (Model
Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600D Series and 600FD HydraFlex Series Draper Platforms:
BXE10761
Reel Flip-Over Bundle for 640FD (Model Year 2016 or newer) and 645FD (Model Year 2015
or newer)
Recommended to reduce reel wrapping. Not available in Spain and Italy.
27 February 2017 US & Canada
3-COMBINE- 3
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
615P - 15 Ft. (4.57 m) Belt Pickup Platform with 179 In. (454.66 cm) Belt Pickup (Model
Year 2017)
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625D - 25 Ft. (7.62 m) Centered Draper Cutting Platform (Model Year 2017)
Equipment for Base Machine
CUTTERBAR:
Fine Tooth Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
Regular Long Point Knife Guards
HEIGHT CONTROL AND FEEDING:
Hydrafloat Automatic Suspension and Position
Control System - Combine
Single Gauge Wheels 630D, 635D and 640D
16 In. Feed Drum with
Pattern Steel Auger Fingers
Hydraulic Top Link Tilt Adjustment
Stainless Steel Feed Floor - Combine
REEL:
One-Piece, Poly Tine Pickup Reel with
8 In. (20cm) Tube (Model 625D)
One-Piece, Poly Tine Pickup Reel with
10 In. (25cm) Tube (Models 630D and 635D)
Two-Piece, Poly Tine Pickup Reel with
6 In. (15cm) Tube (Model 640D)
Hydraulic Fore/Aft Reel Control
Dial-A-Speed Reel Control
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Drum Reverse when used with 70
Series STS Combines,
W540-W660 & T-Series Levelland Combines, and
S-Series Combines
Telescoping Header Connecting Driveshaft
Straight-Line Single Knife Drive Shaft Driven
System (Model 625D)
Combine only application with order Code 0700
Straight-Line Dual Knife Drive Shaft Driven System
(Models 630D, 635D and 640D)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. (102cm) Wide Side Draper Belts with Speed
Sensor
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and
Electrical Hookup)
MISCELLANEOUS:
Heavy Duty Centered Main Frame
Center Belt Bottom Cleanout Door for Combine
Center Feed Applications
Manual Deck Shift
Perma-Glide Platform End Shields
Perma-Glide Platform End Dividers with
Vertical Crop Divider Rods
Road Transport Warning Lights
Stubble Lights
DRIVES:
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois 600D Series Draper Cutting Platforms for Combines and
Windrowers Field Conversions required on any Model 600 Series Draper Platform that will
be used on combines prior to 70 STS Series. Refer to the Product Compatibility Tool and/or
Agricultural Sales Manual for specific information and compatibility requirements. Lateral
Tilt Feederhouse recommended to maximize performance of 625D, 630D, 635D and 640D
Draper Platforms when operating in rolling terrain. Not compatible with W300, W400 and all
W/T-Series HillMaster.
640KH
625D - 25 Ft. (7.62 m) Centered Draper Cutting Platform (Model Year 2017)
63,019.00
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6743, 6747, 6748, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625D - 25 Ft. (7.62 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
0900
Less Dual Knife Drive
KNIFE DRIVE
In Base Price
Single Knife Drive on the 630D may cause excessive vibration of the draper.
0905
Dual Knife Drive
5,721.00
Recommended for rice and tough cutting conditions.
REEL
1005
Poly Tine Pickup Reel
In Base Price
8 In. (20cm) Center Tube Diameter Poly Tine Pickup Reel on 25 Ft.(7.6 m) Platform. Poly
tines not recommended for harvesting rice.
1006
Steel Tine
1,466.00
Extra Large 54 In. (137cm) Diameter Pickup Reel (8 In. (20cm) Center Tube Diameter) 625D
Only.
For tough feeding crops such as rice.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8540
Spare Knife, One-Piece with Knife Head Fine Cut
In Base Price
CUTTERBAR
901.00
Available for 625D and 630D when ordered with Single Knife Drive (option code 0900).
8544
LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut
1,062.00
Available with 625D and 630D with Knife Head for Dual Knife Drive (option code 0905).
Only Spare Knife option available for 635D and 640D.
8656
Cutterbar Full Width Poly Skid Shoes
8452
Reel Flip-Over System
1,652.00
REEL
2,681.00
Recommended to reduce reel wrapping and for tall crops that are tough to convey.
AUGER VERSION
9690
Top Crop Conveying Auger
Recommended for operation in bushy or high volume harvesting conditions.
27 February 2017 US & Canada
3-COMBINE- 2
6,055.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625D - 25 Ft. (7.62 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDING
9978
Feed Drum Deflectors
267.00
For use with 9560 STS and 9570 STS, S650 and S550 S-Series Combines.
9670
Feed Drum Anti-Wrap Bundle
152.00
Recommended for tall, damp crop conditions to reduce wrapping at ends of Feed Drum.
9675
Canola Center Section Seal Kit
199.00
Recommended for Canola. Required to be removed when harvesting other small grains such as
wheat, barley, and oats.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series Draper Platforms:
Field Conversions required on any Model 600D Series Draper Platform that will be used on
combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10132
BXE10325
Dual Float Zone Attachment
Feed Drum Anti-Wrap Bundle
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial Number
-764999)
27 February 2017 US & Canada
3-COMBINE- 3
2,501.40
168.30
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
625D - 25 Ft. (7.62 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXE10412
Feed Drum Anti-Wrap Bundle
243.10
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial number
765000-)
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10262
Reel Flip-Over Bundle for 625, 630, 635D (Model Year 2008 or Newer) and 630FD, 635FD
(Model Year 2012#2015)
3,273.60
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
BXE10873
Reel Flip-Over Bundle for 625D, 630D, 635D (Model Year 2017 or Newer)
Recommended to reduce reel wrapping.
27 February 2017 US & Canada
3-COMBINE- 4
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630D - 30 Ft. (9.14 m) Centered Draper Cutting Platform (Model Year 2017)
Equipment for Base Machine
CUTTERBAR:
Fine Tooth Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
Regular Long Point Knife Guards
HEIGHT CONTROL AND FEEDING:
Hydrafloat Automatic Suspension and Position
Control System - Combine
Single Gauge Wheels 630D, 635D and 640D
16 In. Feed Drum with
Pattern Steel Auger Fingers
Hydraulic Top Link Tilt Adjustment
Stainless Steel Feed Floor - Combine
REEL:
One-Piece, Poly Tine Pickup Reel with
8 In. (20cm) Tube (Model 625D)
One-Piece, Poly Tine Pickup Reel with
10 In. (25cm) Tube (Models 630D and 635D)
Two-Piece, Poly Tine Pickup Reel with
6 In. (15cm) Tube (Model 640D)
Hydraulic Fore/Aft Reel Control
Dial-A-Speed Reel Control
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Drum Reverse when used with 70
Series STS Combines,
W540-W660 & T-Series Levelland Combines, and
S-Series Combines
Telescoping Header Connecting Driveshaft
Straight-Line Single Knife Drive Shaft Driven
System (Model 625D)
Combine only application with order Code 0700
Straight-Line Dual Knife Drive Shaft Driven System
(Models 630D, 635D and 640D)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. (102cm) Wide Side Draper Belts with Speed
Sensor
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and
Electrical Hookup)
MISCELLANEOUS:
Heavy Duty Centered Main Frame
Center Belt Bottom Cleanout Door for Combine
Center Feed Applications
Manual Deck Shift
Perma-Glide Platform End Shields
Perma-Glide Platform End Dividers with
Vertical Crop Divider Rods
Road Transport Warning Lights
Stubble Lights
DRIVES:
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois 600D Series Draper Cutting Platforms for Combines and
Windrowers Field Conversions required on any Model 600 Series Draper Platform that will
be used on combines prior to 70 STS Series. Refer to the Product Compatibility Tool and/or
Agricultural Sales Manual for specific information and compatibility requirements. Lateral
Tilt Feederhouse recommended to maximize performance of 625D, 630D, 635D and 640D
Draper Platforms when operating in rolling terrain. Not compatible with W300, W400 and all
W/T-Series HillMaster.
641KH
630D - 30 Ft. (9.14 m) Centered Draper Cutting Platform (Model Year 2017)
72,458.00
For use with the following S-Series Drive Tire options only: 6714, 6716, 6753, 6759, 6766,
6743, 6747, 6748, 6755, 6760, 6730, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630D - 30 Ft. (9.14 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
0900
Less Dual Knife Drive
KNIFE DRIVE
-5,721.00
Single Knife Drive on the 630D may cause excessive vibration of the draper.
0905
Dual Knife Drive
In Base Price
Recommended for rice and tough cutting conditions.
REEL
1005
Poly Tine Pickup Reel
In Base Price
10 In. (25cm) Center Tube Diameter Poly Tine Pickup Reel on 30 Ft.(9.15 m) and a 35
Ft.(10.7 m) Platform. Poly tines not recommended for harvesting rice.
1006
Steel Tine
1,615.00
For tough feeding crops such as rice.
42 In. (107cm) Diameter Pickup Reel (10 In. (25cm) Center Tube Diameter) 630D Only.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8540
Spare Knife, One-Piece with Knife Head Fine Cut
In Base Price
CUTTERBAR
901.00
Available for 625D and 630D when ordered with Single Knife Drive (option code 0900).
8544
LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut
1,163.00
Available with 625D and 630D with Knife Head for Dual Knife Drive (option code 0905).
Only Spare Knife option available for 635D and 640D.
8656
Cutterbar Full Width Poly Skid Shoes
1,882.00
REEL
8452
Reel Flip-Over System
2,681.00
Recommended to reduce reel wrapping and for tall crops that are tough to convey.
TRANSPORT
8458
Non-Transport Dual Gauge Wheel Bundle
1,866.00
Recommended for 630D, 635D and 640D. Not compatible with Code 8780.
8780
Slow Speed Road Transport System with Warning Lights
This option includes Dual Gauge Wheels. Not homologated for most countries in EU28+ and
27 February 2017 US & Canada
3-COMBINE- 2
5,658.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630D - 30 Ft. (9.14 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TRANSPORT ...Continued...
CIS. Please check your local authority for clarification.
AUGER VERSION
9690
Top Crop Conveying Auger
6,055.00
Recommended for operation in bushy or high volume harvesting conditions.
FEEDING
9978
Feed Drum Deflectors
267.00
For use with 9560 STS and 9570 STS, S650 and S550 S-Series Combines.
9670
Feed Drum Anti-Wrap Bundle
152.00
Recommended for tall, damp crop conditions to reduce wrapping at ends of Feed Drum.
9675
Canola Center Section Seal Kit
199.00
Recommended for Canola. Required to be removed when harvesting other small grains such as
wheat, barley, and oats.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
27 February 2017 US & Canada
3-COMBINE- 3
482.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
630D - 30 Ft. (9.14 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600D Series Draper Platforms:
Field Conversions required on any Model 600D Series Draper Platform that will be used on
combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BH84649
DRAPER HITCH EXTENSION
786.50
For 630D, 635D and 640D Platforms.
BXE10132
BXE10325
Dual Float Zone Attachment
Feed Drum Anti-Wrap Bundle
2,501.40
168.30
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial Number
-764999)
BXE10412
Feed Drum Anti-Wrap Bundle
243.10
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial number
765000-)
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10262
Reel Flip-Over Bundle for 625, 630, 635D (Model Year 2008 or Newer) and 630FD, 635FD
(Model Year 2012#2015)
3,273.60
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
BXE10873
Reel Flip-Over Bundle for 625D, 630D, 635D (Model Year 2017 or Newer)
3,273.60
Recommended to reduce reel wrapping.
BXE10760
Reel Flip-Over Bundle for 630FD and 635FD (Model Year 2016 or newer)
Recommended to reduce reel wrapping.
27 February 2017 US & Canada
3-COMBINE- 4
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635D - 35 Ft. (10.66 m) Centered Draper Cutting Platform (Model Year 2017)
Equipment for Base Machine
CUTTERBAR:
Fine Tooth Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
Regular Long Point Knife Guards
HEIGHT CONTROL AND FEEDING:
Hydrafloat Automatic Suspension and Position
Control System - Combine
Single Gauge Wheels 630D, 635D and 640D
16 In. Feed Drum with
Pattern Steel Auger Fingers
Hydraulic Top Link Tilt Adjustment
Stainless Steel Feed Floor - Combine
REEL:
One-Piece, Poly Tine Pickup Reel with
8 In. (20cm) Tube (Model 625D)
One-Piece, Poly Tine Pickup Reel with
10 In. (25cm) Tube (Models 630D and 635D)
Two-Piece, Poly Tine Pickup Reel with
6 In. (15cm) Tube (Model 640D)
Hydraulic Fore/Aft Reel Control
Dial-A-Speed Reel Control
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Drum Reverse when used with 70
Series STS Combines,
W540-W660 & T-Series Levelland Combines, and
S-Series Combines
Telescoping Header Connecting Driveshaft
Straight-Line Single Knife Drive Shaft Driven
System (Model 625D)
Combine only application with order Code 0700
Straight-Line Dual Knife Drive Shaft Driven System
(Models 630D, 635D and 640D)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. (102cm) Wide Side Draper Belts with Speed
Sensor
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and
Electrical Hookup)
MISCELLANEOUS:
Heavy Duty Centered Main Frame
Center Belt Bottom Cleanout Door for Combine
Center Feed Applications
Manual Deck Shift
Perma-Glide Platform End Shields
Perma-Glide Platform End Dividers with
Vertical Crop Divider Rods
Road Transport Warning Lights
Stubble Lights
DRIVES:
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois 600D Series Draper Cutting Platforms for Combines and
Windrowers Field Conversions required on any Model 600 Series Draper Platform that will
be used on combines prior to 70 STS Series. Refer to the Product Compatibility Tool and/or
Agricultural Sales Manual for specific information and compatibility requirements. Lateral
Tilt Feederhouse recommended to maximize performance of 625D, 630D, 635D and 640D
Draper Platforms when operating in rolling terrain. Not compatible with W300, W400 and all
W/T-Series HillMaster.
642KH
635D - 35 Ft. (10.66 m) Centered Draper Cutting Platform (Model Year 2017)
79,542.00
For use with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6743, 6747,
6748, 6755, 6760, 6746, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635D - 35 Ft. (10.66 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1005
Poly Tine Pickup Reel
REEL
In Base Price
10 In. (25cm) Center Tube Diameter Poly Tine Pickup Reel on 30 Ft.(9.15 m) and a 35
Ft.(10.7 m) Platform. Poly tines not recommended for harvesting rice.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8544
LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut
In Base Price
CUTTERBAR
1,266.00
Available with 625D and 630D with Knife Head for Dual Knife Drive (option code 0905).
Only Spare Knife option available for 635D and 640D.
8656
Cutterbar Full Width Poly Skid Shoes
8452
Reel Flip-Over System
2,182.00
REEL
2,681.00
Recommended to reduce reel wrapping and for tall crops that are tough to convey.
TRANSPORT
8458
Non-Transport Dual Gauge Wheel Bundle
1,866.00
Recommended for 630D, 635D and 640D. Not compatible with Code 8780.
8780
Slow Speed Road Transport System with Warning Lights
5,658.00
This option includes Dual Gauge Wheels. Not homologated for most countries in EU28+ and
CIS. Please check your local authority for clarification.
AUGER VERSION
9690
Top Crop Conveying Auger
6,514.00
Recommended for operation in bushy or high volume harvesting conditions.
FEEDING
9670
Feed Drum Anti-Wrap Bundle
152.00
Recommended for tall, damp crop conditions to reduce wrapping at ends of Feed Drum.
9675
Canola Center Section Seal Kit
Recommended for Canola. Required to be removed when harvesting other small grains such as
27 February 2017 US & Canada
3-COMBINE- 2
199.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635D - 35 Ft. (10.66 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDING ...Continued...
wheat, barley, and oats.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series Draper Platforms:
Field Conversions required on any Model 600D Series Draper Platform that will be used on
combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BH84649
DRAPER HITCH EXTENSION
786.50
For 630D, 635D and 640D Platforms.
BXE10132
BXE10325
Dual Float Zone Attachment
Feed Drum Anti-Wrap Bundle
2,501.40
168.30
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial Number
-764999)
BXE10412
Feed Drum Anti-Wrap Bundle
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial number
765000-)
27 February 2017 US & Canada
3-COMBINE- 3
243.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
635D - 35 Ft. (10.66 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600D Series and 600FD HydraFlex Series Draper Platforms:
Field Conversions required on any Model 600D Series or 600FD HydraFlex Series Draper
Platforms that will be used on combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BXE10262
Reel Flip-Over Bundle for 625, 630, 635D (Model Year 2008 or Newer) and 630FD, 635FD
(Model Year 2012#2015)
3,273.60
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
BXE10873
Reel Flip-Over Bundle for 625D, 630D, 635D (Model Year 2017 or Newer)
3,273.60
Recommended to reduce reel wrapping.
BXE10760
Reel Flip-Over Bundle for 630FD and 635FD (Model Year 2016 or newer)
Recommended to reduce reel wrapping.
27 February 2017 US & Canada
3-COMBINE- 4
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640D - 40 Ft. (12.19 m) Centered Draper Cutting Platform (Model Year 2017)
Equipment for Base Machine
CUTTERBAR:
Fine Tooth Double-Cut Knife System with
Screw Adjustable Knife Hold-downs
Regular Long Point Knife Guards
HEIGHT CONTROL AND FEEDING:
Hydrafloat Automatic Suspension and Position
Control System - Combine
Single Gauge Wheels 630D, 635D and 640D
16 In. Feed Drum with
Pattern Steel Auger Fingers
Hydraulic Top Link Tilt Adjustment
Stainless Steel Feed Floor - Combine
REEL:
One-Piece, Poly Tine Pickup Reel with
8 In. (20cm) Tube (Model 625D)
One-Piece, Poly Tine Pickup Reel with
10 In. (25cm) Tube (Models 630D and 635D)
Two-Piece, Poly Tine Pickup Reel with
6 In. (15cm) Tube (Model 640D)
Hydraulic Fore/Aft Reel Control
Dial-A-Speed Reel Control
Reel Position (Fore/Aft and Height) Resume
Quick Adjust Reel Finger Pitch
Reel and Center Drum Reverse when used with 70
Series STS Combines,
W540-W660 & T-Series Levelland Combines, and
S-Series Combines
Telescoping Header Connecting Driveshaft
Straight-Line Single Knife Drive Shaft Driven
System (Model 625D)
Combine only application with order Code 0700
Straight-Line Dual Knife Drive Shaft Driven System
(Models 630D, 635D and 640D)
Hydraulic Reel Drive Motor
Heavy Duty Feed Drum Drive and
Slip Clutch with Drum and Center Draper Reverse
with Combine Feederhouse
40 In. (102cm) Wide Side Draper Belts with Speed
Sensor
Rubberized Side Belt Drive Rollers
Single-Point (Hydraulic and
Electrical Hookup)
MISCELLANEOUS:
Heavy Duty Centered Main Frame
Center Belt Bottom Cleanout Door for Combine
Center Feed Applications
Manual Deck Shift
Perma-Glide Platform End Shields
Perma-Glide Platform End Dividers with
Vertical Crop Divider Rods
Road Transport Warning Lights
Stubble Lights
DRIVES:
Integrated (On-board) Platform Hydraulic
System for Reel and Draper Belt Drive
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS East Moline, Illinois 600D Series Draper Cutting Platforms for Combines and
Windrowers Field Conversions required on any Model 600 Series Draper Platform that will
be used on combines prior to 70 STS Series. Refer to the Product Compatibility Tool and/or
Agricultural Sales Manual for specific information and compatibility requirements. Lateral
Tilt Feederhouse recommended to maximize performance of 625D, 630D, 635D and 640D
Draper Platforms when operating in rolling terrain. Not compatible with W300, W400 and all
W/T-Series HillMaster.
643KH
640D - 40 Ft. (12.19 m) Centered Draper Cutting Platform (Model Year 2017)
86,550.00
For use with the following S-Series Drive Tire options only: 6753, 6759, 6766, 6743, 6747,
6748, 6755, 6760, 6751, 6762, 6764, 6756, 6734.
DESTINATION
0184
Canada
0202
United States
Same Price
In Base Price
OPERATOR'S MANUAL
27 February 2017 US & Canada
3-COMBINE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640D - 40 Ft. (12.19 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR'S MANUAL ...Continued...
0409
English Operator's Manual
In Base Price
0413
French Operator's Manual
No Charge
0437
Spanish Operator's Manual
No Charge
1005
Poly Tine Pickup Reel
REEL
In Base Price
Poly Tine Pickup Reel - 2-Piece with Center Reel Arm (6 In. (15cm) center tube diameter).
Poly tines not recommended for harvesting rice.
TEMPORARY SURFACE RUST PROTECTION
5600
Temporary Surface Rust/Corrosion Protection
217.00
Required for protection of platform from road salt corrosion during transport from factory in
winter months or export shipment overseas. Required for Export.
5601
Less Temporary Surface Rust/Corrosion Protection
8544
LH and RH One-Piece Spare Knife with Knife Head for Dual Knife Drive Fine Cut
In Base Price
CUTTERBAR
1,379.00
Available with 625D and 630D with Knife Head for Dual Knife Drive (option code 0905).
Only Spare Knife option available for 635D and 640D.
8656
Cutterbar Full Width Poly Skid Shoes
8452
Reel Flip-Over System
2,561.00
REEL
2,681.00
Recommended to reduce reel wrapping and for tall crops that are tough to convey.
TRANSPORT
8458
Non-Transport Dual Gauge Wheel Bundle
1,866.00
Recommended for 630D, 635D and 640D. Not compatible with Code 8780.
8780
Slow Speed Road Transport System with Warning Lights
5,658.00
This option includes Dual Gauge Wheels. Not homologated for most countries in EU28+ and
CIS. Please check your local authority for clarification.
AUGER VERSION
9690
Top Crop Conveying Auger
6,514.00
Recommended for operation in bushy or high volume harvesting conditions.
FEEDING
9670
Feed Drum Anti-Wrap Bundle
152.00
Recommended for tall, damp crop conditions to reduce wrapping at ends of Feed Drum.
9675
Canola Center Section Seal Kit
Recommended for Canola. Required to be removed when harvesting other small grains such as
27 February 2017 US & Canada
3-COMBINE- 2
199.00
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640D - 40 Ft. (12.19 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
FEEDING ...Continued...
wheat, barley, and oats.
MISCELLANEOUS
9100
Enhanced Combine Single Point Latching
56.00
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced (S680 - S690) Combines prior to Model
Year 2017. Please refer to Ag Sales Manual for other compatibility information.
9101
Enhanced Combine Single Point Latching
61.00
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced S660 and S670
Combines prior to Model Year 2017. All T Series Combines prior to May 2016 production.
Please refer to Ag Sales Manual for other compatibility information.
9102
Enhanced Combine Single Point Latching
5.00
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system. Please refer to Ag Sales Manual for other compatibility
information.
ATTACHMENTS FOR FIELD CONVERSION
600 Series HydraFlex Platforms:
BH84398
Platform wedge kit
1,512.50
For all 600 series platforms used on 9000, 10 and 50 series combines.
BH84265
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
600D Series Draper Platforms:
Field Conversions required on any Model 600D Series Draper Platform that will be used on
combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BH84649
DRAPER HITCH EXTENSION
786.50
For 630D, 635D and 640D Platforms.
BXE10132
BXE10325
Dual Float Zone Attachment
Feed Drum Anti-Wrap Bundle
2,501.40
168.30
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial Number
-764999)
BXE10412
Feed Drum Anti-Wrap Bundle
Recommended for tall, damp crop conditions to reduce wrapping at ends of feed drum. Only
compatible with Codes 0700 and 0705. Required in Spain and Italy for rice. (Serial number
765000-)
27 February 2017 US & Canada
3-COMBINE- 3
243.10
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
640D - 40 Ft. (12.19 m) Centered Draper Cutting Platform (Model Year 2017)
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
600D Series and 600FD HydraFlex Series Draper Platforms:
BXE10263
Reel Flip-Over Bundle for 640D (Model Year 2008 or Newer) and 640FD (Model Year 2012
# 2015)
3,273.60
Recommended to reduce reel wrapping. Not compatible 600D Draper Code 1006. Not
available in Spain and Italy.
BXE10874
Reel Flip-Over Bundle for 640D (Model Year 2017 or Newer)
3,273.60
Recommended to reduce reel wrapping.
BXE10761
Reel Flip-Over Bundle for 640FD (Model Year 2016 or newer) and 645FD (Model Year 2015
or newer)
Recommended to reduce reel wrapping. Not available in Spain and Italy.
27 February 2017 US & Canada
3-COMBINE- 4
3,273.60
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 50A, 615, 618R, 618F, 620R, 622R, 625R, 630R 913, 914, 915, 918, 920,
922, 925, 930, 936 Platforms
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION
600 Series Corn Heads:
BH84583
Row Unit for 600 Series Corn Heads
4,889.50
Does not include Stalk Rolls.
For use on Model Year 2011 and prior 600C Corn Heads.
600 Series HydraFlex Platforms:
BH84470
3rd Floor Stripper for 630R, 630F and 635F
177.10
For enhanced feeding in small grain crops. Standard equipment on 625R
Platforms S/N 710801 and Up, and 630R Platforms S/N 711046 and Up.
BH84425
BH84329
Adjustable Reel Drive Relief Valve for 600 Series Rigid and Flex
Cutting Platforms
447.70
Auger Flight and Rear Stripper Extensions
183.70
For 618R, 620R, 622R, 625R, 630R, 618F, 620F, 622F, 625F, 630F Platforms. Required if
Platform is to be used with a 9560 STS, 9570 STS or S550 Combine.
AH205018
Center Feed Auger Flighting
836.74
For 600R and 600F Platforms. Recommended for viney crop conditions.
BH84201
Driveshaft Conversion
1,283.70
For 600 Series Platform used on 9000 and 10 Series Level Land Combines. Includes
Telescoping Driveshaft and Spline-to-Sprocket Adapter and Shields.
BH84327
Raised Cut Height Skid Shoes, Flex Platforms 30 Ft.
3,757.60
Raises Platform cutting height from 1.5 inches (38 mm) to 2.5 inches (63 mm). Includes: Skid
Shoes and End Flex Seals. Recommended for rocky or adverse fields or when high field
residue exits in double crop conditions.
BH84265
BH84403
Reel Position (Fore/Aft and Height) Resume for use on all 600 Series
Platforms
482.90
Stone Dams Short (23 mm) for 615F, 618F and 620F
330.00
Recommended for use in all crop conditions where rocks or other field debris are not present
in cutting area.
600D Series Draper Platforms:
Field Conversions required on any Model 600D Series Draper Platform that will be used on
combines prior to 70 Series.
Refer to the Product Compatibility Tool and/or Agricultural Sales Manual for specific
information and compatibility requirements.
BH84589
Feed Drum Deflectors
295.90
For use with 9560 STS and 9570 STS Combines.
BXE10221
Non-Transport Dual Gauge Wheel Bundle
Recommended for 630D, 635D and 640D. Not compatible on drapers configured with slow
speed transport system.
27 February 2017 US & Canada
3-COMBINE- 1
2,279.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 50A, 615, 618R, 618F, 620R, 622R, 625R, 630R 913, 914, 915, 918, 920,
922, 925, 930, 936 Platforms
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
90 Series Corn Heads:
BH84313
Gathering Chain Paddles (for 2 Rows) for use on all 90 Series Corn Heads
111.10
Order (2) bundles for 1293 Corn Head.
BH81647
Hydraulic Deck Plate Indicator Conversion
255.20
For Corn heads prior to 1998 (up to PIN 675051).
Contains indicator, indicator housing and cable.
BH84476
Row Units Less PERMA-GLIDE Shield and Points
8,511.80
For 90 Series Corn Heads. Includes 2 Row Units less Stalk Rolls.
Belt Pickup:
BH80957
BH84111
154" BPU AHC & SHAFT CONV
Conversion to Single-Point (Hydraulic/Electric) Coupler
761.20
1,035.10
For use on all 900 Series Belt Pickups PIN 685151 to PIN 704000.
BH80958
Header Height Sensing Conversion
314.60
For 110 In., 132 In. and 154 In. Belt Pickup. Provides Header Height Sensing Sensors for Belt
Pickup (up to PIN 685000) equipped with Dial-A-Matic Height Sensing. For use on 50 Series
Combines equipped with Header Height Sensing. NOTE: Requires AH161718 Main Wiring
Harness. Replaces Dial-A-Matic Sensing Box with Header Height Sensing Sensors.
BH84121
Single-Point Coupler Connection Conversion to Multi-Connection Point (Hydraulic/Electric)
Hookup
581.90
For use on all 900 Series Belt Pickups PIN 705101 and Up. Converts all 900 Series Belt
Pickups with Single-Point (Hydraulic/Electrical) Hookup to Multi-Connection Point
(Hydraulic/Electric) Hookup for use with 50 Series Combines.
Combine Attachments:
BXE10666
Enhanced Combine Single Point Latching
61.60
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced Model Year 2016 S680 and S690
Combines.
Please refer to Ag Sales Manual for other compatibility information.
BXE10667
Enhanced Combine Single Point Latching
67.10
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced Model Year 2016
S660 and S670 Combines. All Model Year 2014 and 2015 T Series Combines.
Please refer to Ag Sales Manual for other compatibility information.
BXE10668
Enhanced Combine Single Point Latching
5.50
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
Miscellaneous Attachments:
BH84041
6 Steel Auxiliary Fingers (and attaching hardware) for 25 Ft., 30 Ft. and 36 Ft.
900 Series Draper and 600 Series Platforms. 3 Steel Auxiliary Fingers
used on 15 Ft. through 22 Ft.
Helps Reduce Material Build-up Between Reel and Crop Divider.
27 February 2017 US & Canada
3-COMBINE- 2
200.20
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 50A, 615, 618R, 618F, 620R, 622R, 625R, 630R 913, 914, 915, 918, 920,
922, 925, 930, 936 Platforms
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH81642
Dial-A-Matic Wiring Harness Adapter
222.20
For 50A Row Crop Heads and 900 Series Platforms.
BH81374
Marker Lights
327.80
For 50A row Crop Heads and 918 and 920D Platforms.
BH81264
Stubble Light Conversion
130.90
For use on 90 Series Corn Heads, 900 Series Drapers and 600 Rigid and Flex Platforms.
BH81695
Universal Driveshaft
1,767.70
For 50A row Crop Heads.
Non Current Draper Platforms:
BH90130
BH78459
925 DRAPER EXTREME RICE
Auto Reel Speed
1,735.80
122.10
For use on 900 Series Draper Platforms.
AH211747
Combine Adapter Harness, 31-Pin to 16-Pin
161.75
Required to use 900D Series Platform on 10 Series or 9000 Series Combines.
BH81731
In-Cab Draper Speed Control Retrofit Package
972.40
Includes Draper Speed Switch for Armrest Control Panel, Switch Decal, Combine Adapter
Harness and Electrical Relay. Required for In-Cab Draper Speed Control on any 9510, 9500,
9610, 9600, CTS II, and CTS Combines.
BH84112
Multi-Connection (Hydraulic/Electric) Conversion to Single-Point (Hydraulic/Electric)
Coupler.
1,721.50
For use on all 900 Series Draper Platforms Up to PIN 685151 - PIN 704000. Converts 900
Series Draper Platforms with Multi-Connection Point Hookup to a Single-Point
(Electric/Hydraulic) Hookup for use with 60 and 70 Series Combines and converted 50 Series.
Non-Current HydraFlex and Rigid Platforms:
BH79986
915 SIDEHILL Auger Drive SHAFTS & SHIELDS with Contour Master
1,270.50
BH79721
920' SIDEHILL Auger Drive SHAFTS & SHIELDS with Contour Master
779.90
BH79723
925' SIDEHILL Auger Drive SHAFTS & SHIELDS with Contour Master
634.70
BH79991
930' SIDEHILL Auger Drive SHAFTS AND SHIELDS for Contour Master
974.60
BH84566
CROP PICKUP, LIFTER, 625 RIGID 4 INCH
995.50
BH84567
CROP PICKUP, LIFTER, 630 RIGID 4 INCH
1,181.40
BH80950
Contour Master Tilt Sensors for 900 Series Flexible Platforms (up to PIN 684999)
443.30
NOTE: Requires AH164788 Wiring Harness for 915F, 918F,
and 920F, or AH164881 Wiring Harness for 922F, 925F,
and 930F. For use with 50 Series Combines only.
BH84098
Dial-A-Matic Electrical Conversion
Includes Dial-A-Matic Sensor and Harness to allow compatibility with a Combine equipped
with Dial-A-Matic. Also requires BH84096. See Attachment for Field Conversion for
Non-Current 9000 Series Combines, Cab Accessories.
27 February 2017 US & Canada
3-COMBINE- 3
390.50
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 50A, 615, 618R, 618F, 620R, 622R, 625R, 630R 913, 914, 915, 918, 920,
922, 925, 930, 936 Platforms
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH84095
Electrical Harness Adapter
502.70
Converts 600 Series Rigid and Flex Platforms' electrical system for use on 9000 and 10 Series
Combines. Includes harness and attaching parts.
BH80948
Header Height Sensing System and Contour Master Sensors for all 900 Series Flexible
Platforms (PIN 685000 and up)
666.60
NOTE: When ordered without factory-installed Sensors, AH164788
Electrical Harness is required for 915F, 918F, and 920F.
AH164881 Electrical Harness is required for 922F, 925F, and 930F.
For use with 50 Series Combines equipped with Header Height
Sensing and Contour Master Tilt System.
BH80949
Header Height Sensing System for all 900 Series Flexible Platforms (up to PIN 684999)
337.70
NOTE: Replaces Dial-A-Matic Sensing System. Requires AH164786
Electrical Harness for 915F, 918F, and 920F, or AH164787
Electrical Harness for 922F, 925F, and 930F. For use with 50 Series Combines equipped with
Header Height Sensing.
BH80951
BH84277
Header Height Sensing and Contour Master Tilt Sensors for all 900 Series Flexible
Platforms (up to PIN 684999)
Header Height Sensing and Lateral Tilt Feederhouse Sensors
723.80
3,170.20
For use with 600 Series Rigid Platforms on all 50 Series and 60 Series Combines. Provides
Lateral Tilt Feederhouse Sensing only on 9000 Series and
10 Series Combines.
BH79835
Platform Auger Flight Extensions
196.90
For 900 Platforms (SN 655301-)
BH78197
Platform Auger Flight Extensions
295.90
For 900 Platforms (SN -655300)
BH81313
Reel Drive Relief Valve and Hoses
459.80
For use with 200 and 900 Series Platforms.
BH75090
Reel End Shields
905.30
For use on 900 Series Platforms.
BH81256
Reel Fore and Aft Hydraulic Lines
1,185.80
For use on 900 Series Platforms.
BH80439
Short, Perma-Glide Divider Point
1,551.00
Includes Loop Divider. For Use on All 200 Series and 900 Series Platforms ( - SN667900).
BH80364
Standard, Perma-Glide Divider Point
Includes Short Divider. For Use on All 200 Series and 900 Series Platforms. AH147232 Loop
Divider For Use When Converting to Short Version.
27 February 2017 US & Canada
3-COMBINE- 4
2,128.50
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 494, 594, 692, 693, 694, 892, 893, 894, 1290, 1291, 1293 Corn Heads
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION
90 Series Corn Heads:
BH79944
Center Auger Cover
828.30
For 90 Series Corn Heads.
BH81641
Combine Adapter Harness, 16-Pin to 31-Pin
200.20
Required for use of 90 Series Corn Head (up to PIN 685000) on 50 Series Combines.
BH81651
Combine Adapter Harness, 31-Pin to 16-Pin
180.40
Required for use of 90 Series Corn Head (PIN 685000-704999) on 10 Series or 9000 Series
Combines.
BH81856
Contour Master Shaft
1,079.10
For 914 Platform and 494 Corn Head used with 9000, 9010 and CTSII combines.
BH84109
Conversion to Single-Point Multi-Coupler
766.70
For use on all 90 Series Corn Heads Up to PIN 704000 without Hydraulic Adjustable Deck
Plates. Provides Single-Point Multi-Coupler (Electrical only) for Hookup to a 60 or 70 Series
Combine. For Corn Heads prior to PIN 685201 and not converted for use on 50 Series
Combines, additional conversion is required. See Agricultural Sales Manual for conversion to
use on 50 Series.
BH80778
Deck Plates (Remote Hydraulic Adjustment) for 1293 Corn Head
5,306.40
Requires Code AH161692 if Header is not equipped with Header Height Sensing.
BH80772
Deck Plates (Remote Hydraulic Adjustment) for 893 Corn Head
4,632.10
Requires Code AH161691 if Header is not equipped with Header Height Sensing.
BH80937
Header Height Sensing/Contour Master Tilt Sensors for 1290 Corn Head
2,024.00
For Corn Heads NOT equipped with Hydraulic Adjustable Deck Plates with Electronic Deck
Plate Position Indicator. Includes Header Height Sensing/Contour Master Tilt Sensors.
Requires a new Main Wiring Harness, order through service parts. Refer to the Agricultural
Sales Manual for more specific ordering information.
BH80938
Header Height Sensing/Contour Master Tilt Sensors for 1291 and 1293 Corn Head
2,182.40
For Corn Heads NOT equipped with Hydraulic Adjustable Deck Plates with Electronic Deck
Plate Position Indicator. Includes Header Height Sensing/Contour Master Tilt Sensors.
Requires a new Main Wiring Harness, order through service parts. Refer to the Agricultural
Sales Manual for more specific ordering information.
BH80934
Header Height Sensing/Contour Master Tilt Sensors for 693 Corn Head
1,422.30
For Corn Heads NOT equipped with Hydraulic Adjustable Deck Plates with Electronic Deck
Plate Position Indicator. Includes Header Height Sensing/Contour Master Tilt Sensors.
Requires a new Main Wiring Harness, order through service parts. Refer to the Agricultural
Sales Manual for more specific ordering information.
BH80936
Header Height Sensing/Contour Master Tilt Sensors for 893 Corn Head
For Corn Heads NOT equipped with Hydraulic Adjustable Deck Plates with Electronic Deck
Plate Position Indicator. Includes Header Height Sensing/Contour Master Tilt Sensors.
Requires a new Main Wiring Harness, order through service parts. Refer to the Agricultural
Sales Manual for more specific ordering information.
27 February 2017 US & Canada
3-COMBINE- 1
1,945.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
Attachments for 494, 594, 692, 693, 694, 892, 893, 894, 1290, 1291, 1293 Corn Heads
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BH80939
Header Height Sensing/Contour Master Tilt Sensors for 894 Corn Head
2,069.10
For Corn Heads NOT equipped with Hydraulic Adjustable Deck Plates with Electronic Deck
Plate Position Indicator. Includes Header Height Sensing/Contour Master Tilt Sensors.
Requires a new Main Wiring Harness, order through service parts. Refer to the Agricultural
Sales Manual for more specific ordering information.
BH81858
Hydraulic Deck Plates Electronic Position
460.90
For 90 Series Corn Heads used with 50 and 60 Series Combines.
BH84119
Single-Point Coupler Connection Conversion (Electric only) to Single Electrical Recepticle
Hookup
357.50
For use on 90 Series Corn Head (PIN 705101 and Up) without Hydraulic Deck Plates
Converts to 90 Series Corn Head with Single-Point Coupler to a Single Electrical Socket to
Socket Receptable Hookup for use on 50 Series Combines.
BH84118
Single-Point Coupler Connection Conversion to Multi-Connection Point (Hydraulic/Electrical)
Hookup
728.20
For use on 90 Series Corn Heads equipped with hydraulic deck plates (PIN 705101 and Up)
Converts 90 Series Corn Head equipped with Single-Point Coupler to Multi-Connection Point
hookup for use on 50 Series Combines.
Combine Attachments:
BXE10666
Enhanced Combine Single Point Latching
61.60
Required for use on Harvester Works sourced S680 and S690 Combines prior to Model Year
2016 (Up to PIN 785000) and Zweibrucken sourced Model Year 2016 S680 and S690
Combines.
Please refer to Ag Sales Manual for other compatibility information.
BXE10667
Enhanced Combine Single Point Latching
67.10
Required for use on Harvester Works sourced Model Year 2014 and 2015 S650, S660 and
S670 Combines (Up to PIN 765000 - 775999) and Zweibrucken sourced Model Year 2016
S660 and S670 Combines. All Model Year 2014 and 2015 T Series Combines.
Please refer to Ag Sales Manual for other compatibility information.
BXE10668
Enhanced Combine Single Point Latching
5.50
Required for use on Model Year 2012 and 2013 (PIN 745100 - 755999) S550, S650, S660,
S670 and T Series Combines and all Combines prior to Model Year 2012 (PIN - 740999) with
Single Point Latching system.
Please refer to Ag Sales Manual for other compatibility information.
Miscellaneous Attachments:
BH81264
Stubble Light Conversion
For use on 90 Series Corn Heads, 900 Series Drapers and 600 Rigid and Flex Platforms.
27 February 2017 US & Canada
3-COMBINE- 2
130.90
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
GoHarvest Premium Combine Simulator
Equipment for Base Machine
The John Deere GoHarvest Premium Combine Simulator
is a fully functioning simulator. The simulator
will provide a series of training modules for all
experience levels to complete.
Basic Cloth Operator's Seat
Tilt - Telescoping Steering Column
Driver Seat Belts
CONTROLS AND INSTRUMENTATION:
Interactive Combine Adjustment
CommandTouch Operator Control Console
Dial-A-Speed (Automatic Reel Speed Control)
Header Reverser with Reel Reverse Feature
GreenStar 3 2630 Display for:
Combine/header/engine information
Diagnostic and calibrations
Folding grain tank extensions fold/unfold (if
equipped)
Chopper position
TouchSet (Automatic Combine Adjustment)
Harvest Monitor
Hydrostatic Ground Speed Control Handle with
Integral Buttons for:
AutoTrac Resume button
Reel Height and Fore/Aft Remote
Reel Control or Feederhouse
Backshaft Speed
2-Speed Header Raise and Lower
Lateral Tilt Feederhouse Control
3-Position Header Height and reel resume
5-Position Unloading Auger Swing and
Unloading Auger Engage Controls
Quick-Stop Header/Unloading Auger
CODE
Disengage Switch
TouchSet (Automatic Combine Adjustment) includes:
Full Automatic Adjustment or Individual
Remote Adjustment for Rotor Speed,
Concave Spacing, Cleaning Fan RPM, Chaffer/Sieve
element opening
GreenStar Harvest Monitoring (Yield and Moisture)
Multi-Function CommandTouch Cornerpost Display
with:
Engine Power Meter
Engine RPM
Fuel level and temperature gauge
Deck plate and dial-a-speed display
Transmission gear or range indicator
Lateral Tilt Feederhouse indicator
VisionTrak Grain Loss and tailings monitor
Active Header Control and Header Float Display
Exhaust filter cleaning indicator
Header Control Package Includes:
3-Position Header Height Resume, Reel Resume,
Active Header float system
Header Height Sensing System
Support frame for four 55 inch screens
Portable base with the seat, steering column, and
corner post display attached
Computer Tower
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
9SM3H
GoHarvest Premium Combine Simulator
26,674.00
The GoHarvest Premium Combine Simulator requires four TV screens to be purchased by the
user. See the Ag Sales manual for TV screen specification details.
DESTINATION
0184
Canada
Same Price
0202
United States
1825
GreenStar 3 2630 Display (mounted on armrest)
In Base Price
DISPLAY
Includes five year AutoTrac activation.
27 February 2017 US & Canada
3-COMBINE- 1
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE COMBINES
GoHarvest Premium Combine Simulator
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
3-COMBINE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Equipment for Base Machine
CH570 TRACK CANE HARVESTER
ENGINE:
John Deere 9.0 L PowerTech with turbo-charger and
air-to-air aftercooler
Electronically controlled fuel injection
Fuel cooler
605-L fuel tank capacity
High capacity air pre-cleaner and filter
Fuel water separator
TRANSMISSION AND CONTROLS:
Two hydrostatic pumps providing variable speed
0 to 9.0 km/h (5.6 mph)
Two fixed displacement motors
Electronic ground drive control
TRACKS:
Sealed chain
Eight bottom rollers and one carrier roller
Single piece bolt on sprocket thru bolts mounting
bottom rollers to track frame
BRAKES AND STEERING:
Steering control is obtained by varying the
propulsion pumps displacement with a steering wheel
Oil bath brake system spring applied with
hydraulic release
ELECTRIC SYSTEM:
200 amp alternator
12-V
TOPPER:
Cuts whole tops
Accumulator cushioned
BASECUTTER:
Hydraulic piston motor drive
Bolt-on wear plates for Basecutter legs
Two circular discs
Five blades each
CROP DIVIDERS AND FEEDROLLERS:
Manual crop divider and knockdown roller tilt
Reversible hydraulic driven crop divider and
feedroller system
Outer scrolls
Hydraulically driven front and lower knockdown
rollers with manual tilt adjustment
Ten 25.4 cm (10 in.) diameter feedrollers,
including the buttlifter
Factory hard surfaced feedrollers with teeth
External floating feedroller stop beneath each
feedroller cradle
Three paddle closed buttlifter
Billet control valve
CHOPPER:
Hydraulic piston motor drive
38 cm (15 in.) chopper
95 mm blades
Sill roller
PRIMARY EXTRACTOR:
Plastic 152 cm (5 ft) primary extractor hood
Hydrostatically variable speed
Vertical mount, direct drive fan
Four blade extractor fan
Requires no balancing with blade change
Hydraulically controlled hood
Steel wear ring
Plastic hood wearliner
ELEVATOR:
Reinforced structural tube frame loading to either
CODE
side
Grease cylinder elevator chain adjustment
Motor driven directional discharge
Hydraulic lift cylinders
Slew wiper
SECONDARY EXTRACTOR:
Plastic hood
Hydraulically controlled hood rotation
Hydraulically driven flap
OPERATORS STATION:
Forward tilting cab for added serviceability
Pressurized cab with heater and air conditioner
Operator air suspension swivel seat and instructor
training seat
Dual tilt telescopic steering column
Full length curved safety windshield
Front windshield washer and wiper
Side glass wipers and washers
Folding arm left and right adjustable rear view
mirrors
In cab convex mirror for elevator
Two fire extinguishers; One dry chemical and one
water
CommandARM armrest with CommandCenter touch
display for monitoring and adjusting harvester and
engine parameters
Warning alarms and diagnostic information center
Multifunction control lever, floats with seat for
propulsion
Elevator on and off
Basecutter, topper, and crop dividers height,
elevator swing and secondary extractor hood
rotation
Bin flap position and horn
Digital cornerpost display for engine coolant
temperature, engine rpm
Engine horsepower percent load, fuel level
Basecutter pressure, basecutter height
Basecutter target height
Primary extractor fan speed, hydraulic oil
temperature
Parking brake indicator, ground speed
Master warning lights (MWL)
Turn signals and hazards
Signal and warning lights
Integrated AutoTrac components, AutoTrac ready
JDLink Capable
OTHERS:
Compliant with all applicable standards
Anti-slip platforms in service areas
Hand rails and non-skid surfacing footing on all
service areas
Reverse Alarm
Automatic self-cleaning reversing fan for
hydraulic oil and engine cooling systems
Engine compartment work light
Twelve operating lights (including headlights)
Battery remote jump start terminals
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BASE MACHINE
062AT8
CH570 Track Cane Harvester
0202
United States
471,582.00
DESTINATION
No Charge
Requires code 7020 or 7030 (Tier 3 Engine) and 6700 (English text decals).
0230
Australia
No Charge
Fire Extinguishers are not included.
0002
Angola
No Charge
0003
Benin
No Charge
0005
Burkina Faso
No Charge
0006
Burundi
No Charge
0007
Cameroon
No Charge
0009
Central African Republic
No Charge
0011
Chad
No Charge
0013
Congo, Republic of
No Charge
0014
Congo, Democratic Republic of
No Charge
0016
Egypt
No Charge
0017
Equatorial Guinea
No Charge
0019
Ethiopia
No Charge
0020
Gabon
No Charge
0021
Gambia
No Charge
0022
Ghana
No Charge
0023
Guinea
No Charge
0024
Guinea-Bissau
No Charge
0025
Ivory Coast
No Charge
0026
Kenya
No Charge
0028
Liberia
No Charge
0030
Madagascar
No Charge
0031
Malawi
No Charge
0034
Mauritius
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0035
Morocco
No Charge
0036
Mozambique
No Charge
0037
Namibia
No Charge
0039
Nigeria
No Charge
0042
Reunion (French Owned)
2,734.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0040
Rwanda
No Charge
0043
Senegal
No Charge
0045
Sierra Leone
No Charge
0047
South Africa
No Charge
0057
South Sudan
No Charge
0048
Sudan
No Charge
0049
Swaziland
No Charge
0050
Tanzania
No Charge
0051
Togo
No Charge
0053
Uganda
No Charge
0054
Zambia
No Charge
0055
Zimbabwe
No Charge
0070
Burma (Myanmar)
No Charge
0071
Cambodia
No Charge
0072
China
2,734.00
Requires code 7020 or 7030 (Tier 3 Engine).
Includes China Homologation and Certification. Fire Extinguishers are not included.
0231
Fiji
No Charge
0075
Indonesia
No Charge
0079
Japan
No Charge
0086
Laos
No Charge
0088
Malaysia
No Charge
0093
Pakistan
No Charge
0239
Papua New Guinea
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0094
Philippines
No Charge
0100
Sri Lanka
No Charge
0102
Taiwan
No Charge
Requires code 7020 or 7030 (Tier 3 Engine).
0104
Thailand
No Charge
Requires code 0439.
0109
Vietnam
No Charge
0182
Barbados
No Charge
0183
Belize
No Charge
0185
Costa Rica
No Charge
0188
Dominican Republic
No Charge
0189
El Salvador
No Charge
020G
Guadeloupe
2,734.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0191
Guatemala
No Charge
0192
Haiti
No Charge
0193
Honduras
No Charge
0194
Jamaica
No Charge
0195
Mexico
No Charge
0196
Nicaragua
No Charge
0197
Panama
No Charge
0201
Trinidad and Tobago
No Charge
0204
Martinique
2,734.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0210
Argentina
No Charge
Fire Extinguishers are not included.
0211
Bolivia
No Charge
0212
Brazil
No Charge
0214
Colombia
No Charge
0215
Ecuador
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0216
Guyana
No Charge
0217
Paraguay
No Charge
0218
Peru
No Charge
0219
Suriname
No Charge
0220
Uruguay
No Charge
0221
Venezuela
No Charge
OPERATOR'S MANUAL, DECALS, AND MONITORS
Operator's Manual
0409
English
No Charge
Includes operator manual and decals in English required for USA.
0448
English - Export
No Charge
Includes operator manual in English and non-text decals.
0437
Spanish
No Charge
Includes operator manual in Spanish and text-free decals.
0413
French
No Charge
Includes operator manual in French and text-free decals.
0430
Portuguese
No Charge
Includes operator manual in Portuguese and text-free decals.
0439
Thai
No Charge
Includes operator manual in Thai and text-free decals.
0426
Simplified Chinese
No Charge
Includes operator manual in Chinese and text-free decals.
0401
Arabic
No Charge
Includes operator manual in Arabic and text-free decals.
SHIPPING PREPARATION
7710
Domestic shipping
In Base Price
Unit fully assembled with all blades installed.
7711
Mexico shipping preparation
1,198.00
Unit assembled prepared for truck transport including a support stand for the elevator.
7712
Export preparation - Wood with 6 m (20 ft) container shipment
1,957.00
Not available with Codes 6510, 6520, and 6530.
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 6.096 m (20 ft )container. The main unit is ready for
shipment as Ro-Ro or on a flat rack.
7713
Export preparation - Metal with Ro-Ro Unit
Elevator, topper, and other components are removed and packed on a metal pallet to be
shipped separately. The main unit is ready for shipment as Ro-Ro or on a flat rack.
27 February 2017 US & Canada
11-SUGARCANE- 5
2,477.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SHIPPING PREPARATION ...Continued...
7715
Export preparation - Wood with 12 m (40 ft) container shipment
1,957.00
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 12 m (40 ft) container. The main unit is ready for shipment
as Ro-Ro or on a flat rack.
FRAME
0901
Standard frame
In Base Price
0911
Track frame with 254 mm (10 in). lift (Louisiana)
5,817.00
Recommended for row profile higher than 164 m (6.45 in.). Basecutter disc clearance at its
lowest position is 164 mm (6.45 in.) and 638 mm (25.1 in.) at its highest position.
0921
Standard frame wide track frame - 508 mm (20 in.) shoe
2,095.00
This option is necessary to install 508 mm (20 in.) wide shoes (Code 2030).
ENGINE
7000
John Deere 9.0 L PowerTech 251 kW (337 hp) at 2100 rpm - Tier 2
In Base Price
Option not available for USA, India, China, Taiwan or European Community (CE). It includes
the standard hydraulic system for the Basecutter and chopper circuits.
7010
John Deere 9.0 L PowerTech 280 kW (375 hp) at 2100 rpm - Tier 2 and high efficiency
hydraulics
24,050.00
Option not available for USA, India, China, Taiwan or European Community (CE). It includes
the high efficiency hydraulics for the Basecutter and chopper circuits. It is recommended for
harvesting heavy green cane or operations that require high ground speed.
7020
John Deere 9.0 L PowerTech 3 251 kW (337 hp) at 2100 rpm - Tier 3
12,409.00
Option only available for China, Taiwan and India. Option not available for USA and
European Community (CE). It includes the standard hydraulic system for the Basecutter and
chopper circuits.
7030
John Deere 9.0 L PowerTech 280 kW (375 hp) at 2100 rpm - Tier 3 and high efficiency
hydraulics
33,617.00
Option only available for China and Taiwan. Option not available for USA, European
Community (CE) or India. It includes the high efficiency hydraulics for the Basecutter and
chopper circuits. It is recommended for harvesting heavy green cane or operations that require
high ground speed.
7040
John Deere 9.0 L PowerTech 251 Kw (337 HP) at 2100 RPM - Tier 4
22,211.00
Option only available for US, Japan and CE countries. It includes the standard hydraulic
system for the Basecutter and Chopper circuits.
7050
John Deere 9.0 L PowerTech 280 Kw (375 HP) at 2100 RPM - Tier 4 and High Efficiency
Hydraulics
Option only available for USA, Japan and CE countries. It includes the high efficiency
hydraulics for the Basecutter and Chopper circuits. It is recommended for harvesting heavy
green cane or operations that require high ground speed.
CONNECTIVITY
Machine connectivity functions require cellular coverage.
Options with JDLink include the following hardware (unless otherwise noted):
- JDLink hardware: integrated cab wiring harness, antenna, and Modular Telematics Gateway
(MTG).
- 1 Ethernet harness connecting the MTG to the primary display/integrated processor.
27 February 2017 US & Canada
11-SUGARCANE- 6
39,331.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
- 1 Ethernet harness routed from the MTG to the optional display port.
Features will vary depending on the option selected. See sales manual for more information.
Subscription length of contract varies; Subscription renewal required after term of service for
continued functionality.
Option availability limited by specific geographical regions. Please refer to region and country
specific price page section for appropriate order codes.
1885
JDLink Capable
In Base Price
Includes cab wiring harness Ethernet harnesses and integrated cab wiring harness. Requires
field kit installation, antenna, activation, and subscription for JDLink functionality
Not available in United States or Australia.
188I
JDLink Connect - Subscription not included
No Charge
Includes JDLink hardware, ethernet harness.
Does not include a JDLink Connect subscription.
Only available in the United States and Australia, through dealers that do not meet New Model
Qualification (NMQ) requirements.
188J
JDLink Connect - 1 Year subscription included
No Charge
Includes JDLink hardware, a 50 hour JDLink Ultimate remote display access (RDA),
temporary subscription, 1 year JDLink Connect subscription, ethernet harness when
GreenStar 3 (GS3) 2630 Display is mounted on cornerpost, ethernet cable (order from service
parts) is required to connect display to Modular Telematics Gateway (MTG).
Use of this service, and all rights and obligations of John Deere and the customers (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable services and software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States and Australia through dealers that meet New Model
Qualification (NMQ) requirements.
188U
JDLink Hardware only - Subscription Not Included
No Charge
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Only available in the United States and Australia, for customers who do not choose to use the
JDLink service and dealers that do not meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), and Ethernet harnesses. and Machine Communication Radio antenna
harness. Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable (order from
Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
Only available in United States and Australia.
TRACKS
6800
Standard chain with 457.2 mm (18 in.) straight shoes
27 February 2017 US & Canada
11-SUGARCANE- 7
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TRACKS ...Continued...
6810
Standard chain with 406.4 mm (16 in.) bent shoes
1,462.00
6820
Standard chain with 457.2 mm (18 in.) bent shoes
1,693.00
6830
Standard chain with 508 mm (20 in.) bent shoes
2,579.00
Requires Code 0921.
6840
Sealed and lubricated chain with 406.4 mm (16 in.) bent shoes
5,174.00
6850
Sealed and lubricated chain with 457.2 mm (18 in.) bent shoes
4,449.00
BASECUTTER HEIGHT CONTROL AND CROP DIVIDERS FLOAT
CONTROL
3200
Standard Basecutter height control (manual) and crop dividers without floating control
3220
Standard Basecutter height control (manual) and floating crop dividers
In Base Price
9,104.00
The floating control system allows the crop dividers to float following the interrow ground
profile. Good field preparation is needed for optimum performance.
3230
Contour Basecutter height control and floating crop dividers
13,388.00
The floating control system allows the crop dividers to float following the inter-row ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses basecutter pressure and the crop dividers
position as a reference of the ground height. Good field preparation is needed for optimum
performance.
CANE TOPPER
5000
Whole topper
5010
Shredder topper
In Base Price
6,869.00
Recommended for green cane harvesting. Shredded tops are spread out better in the field, are
easier to incorporate in the soil when cultivating, and decompose faster.
5030
Extended width whole topper (same as 3522)
4,714.00
Wider dimensions improve leaves and tops gathering.
CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT
5200
Manual crop divider and knockdown roller tilt
5210
Hydraulic crop divider and knockdown rollers tilt
In Base Price
4,567.00
With this option, the crop dividers and the front and lower knock down rollers angle can be
adjusted quickly from the cab to adapt to different cane conditions in the field.
CROP DIVIDERS SIDE KNIVES
5350
Less Side Knives
In Base Price
Recommended for light and straight cane.
5355
With Side Knives
4,607.00
Recommended for lodged and tangled cane. Stalks not separated upon reaching the side knives
are cut before the harvester pulls them from the ground. Includes hydraulic position
adjustment. Requires option 5210 (Hydraulic Tilt).
27 February 2017 US & Canada
11-SUGARCANE- 8
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BASE CUTTER DISC
5600
61 cm (24 in.) circular
In Base Price
For dry harvesting conditions. Provides a cleaner cut on stubble.
5610
55.9 cm (22 in.) steel circular
Same Price
Aides in the removal of rocks, soil and other extraneous material.
BASE CUTTER LEGS
5650
Standard legs
In Base Price
5660
Breakaway Basecutter legs
2,441.00
Fuse will break to prevent major Basecutter damage.
BUTTLIFTER
5700
Three Paddle Closed Buttlifter
5720
Three Paddle Open Buttlifter
In Base Price
468.00
Minimizes soil intake and mud buildup.
5730
Four Bar Open Buttlifter
551.00
Minimizes soil intake and mud buildup.
DIFFERENTIAL CHOPPER
5900
38 cm (15 in.) 95 mm eight blade chopper system
In Base Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 in.).
5910
38 cm (15 in.) 95 mm six blade chopper system
Same Price
Average billet lengths of approximately 230 to 250 mm (9 to 10 in.).
5920
38 cm (15 in.) 95 mm eight blade overlap chopper
Same Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 in.). Improves feeding, increases
the life of the blades, and facilitates trash removal in the primary extractor.
5930
38 cm (15 in.) 95 mm ten blade overlap chopper
Same Price
Average billet lengths of approximately 150 to 180 mm (6 to 7 in.). Shorter billets will increase
cane density in wagon. Overlap chopper improves feeding, increases the life of the blades, and
facilitates trash removal in the primary extractor.
SILL ROLLER
6010
Sill roller
In Base Price
Facilitates billet movement, increases cleaning, and avoids back feeding.
PRIMARY EXTRACTOR
6100
Abrasive resistant steel wear ring
6110
Duraliner (Vidaplate) steel wear ring
Highly abrasive resistant material prolongs the life of the wear ring.
27 February 2017 US & Canada
11-SUGARCANE- 9
In Base Price
3,412.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SECONDARY EXTRACTOR
6400
Secondary extractor with motor driven directional discharge (1650 rpm)
In Base Price
Requires Code 7000, 7020 or 7040.
6420
Secondary extractor with motor driven directional discharge - High performance (1900 rpm)
600.00
Requires Code 7010, 7030 or 7050.
6430
Less secondary extractor
-2,147.00
Includes a metal hood that replaces the plastic hood.
ELEVATOR EXTENSION
6500
No elevator extension
In Base Price
Recommended for row spacing between 1.4 and 1.6 meters.
6510
30 cm (12 in.) elevator extension installed
2,767.00
Requires Code 7713 or 7715 for ocean shipment.
Recommended for row spacing between 1.6 and 1.7 m.
6520
61 cm (24 in.) elevator extension installed
3,932.00
Requires Code 7713 or 7715 for ocean shipment.
Recommended for row spacing between 1.7 and 1.8 m.
6530
86 cm (34 in.) elevator extension installed
4,509.00
Requires Code 7713 or 7715 for ocean shipment.
Recommended for row spacing between 1.8 and 1.9 m.
HYDRAULICS
3100
Standard - 10W30 motor oil
3110
RYKON 68 hydraulic fluid
8610
Whole Topper Collector Extension
In Base Price
808.00
WHOLE TOPPER COLLECTOR EXTENSION
613.00
Requires Code 5000.
Improves standard topper performance in heavy cane. It also helps handling cane flowers.
CROP DIVIDER VINE CUTTER KNIVES
8030
Crop divider vine cutter knives
482.00
Prevent vines from wrapping around crop dividers.
MUD FLAP AGITATOR
8170
Mud flap agitator
1,194.00
Prevents mud buildup on flap located behind feed rollers and underneath chopper drum
assembly.
ELEVATOR SPEED CONTROL
8640
Elevator Speed Control
Allows the operator to reduce the speed of the elevator in light crops thus reducing chain,
floor, wearstrip, sprocket, and bearing wear.
27 February 2017 US & Canada
11-SUGARCANE- 10
1,342.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ELEVATOR SPEED CONTROL ...Continued...
MISCELLANEOUS
8246
LED lighting - Auxiliary for loading wagon
1,266.00
Replaces the four base halogen lights located on cooling package and elevator with four LED
lights. It also includes a topper boom light to service basecutter and front end components.
95BI
Two speed track motors
4,913.00
This option replaces the standard fixed displacement ground drive motors with variable
displacement motors. Maximum speed increases from 9 kph (5.6 mph) to approximately 11
kph (6.9 mph). Top speed is dependent on hydraulic system option.
8813
Premium Radio w/ Bluetooth
9420
Rotary hand pump for hydraulic oil
290.00
MISCELLANEOUS
205.00
Recommended to fill up hydraulic tank when needed.
9400
Daily service tool kit
570.00
Includes basic tools.
9410
Deluxe tool kit (includes 9400 daily service tool kit)
1,138.00
Includes Daily Service Tool Kit (code 9400) and Supplemental Tools.
9430
Spanish language for USA
No Charge
Includes operator manual in Spanish and Spanish text decals to be installed by dealer or
customer in addition to operator manual and decals in English factory installed as per Code
6700.
9450
Beacon lights
213.00
Includes two beacon lights.
9475
Elevator swing foot pedal control kit
517.00
Includes pedals assembly, electrical harness, and necessary hardware to be installed by dealer
or customer. Kit will allow operator to control elevator swing using the pedals in addition to
the controls on the multi-function lever.
95BW
Extended engine warranty 5 Year or 5,000 hours whichever occurs first
3,506.00
For USA market only.
9500
Startup Parts Package
10,000.00
Includes blades, filters and other wear items required during the harvesting season:
200 Basecutter Blades, 100 Chopper Blades, 20 Topper and Side Knife Blades, 2 Primary
Extractor Fan Blade Sets, 1 Secondary Extractor Blade Set, 1 Primary Extractor Fan Hub, 2
Engine Air Primary Filters, 1 Engine Air Secondary Filter, 3 Engine Fuel Pre-Filters, 6
Engine Oil Filters, 3 Primary and Final Fuel Filter Kits, 3 Hydraulic Oil Filters, 2 Air
Conditioning Fresh Air Filters, 2 Air Conditioning Recirculating Filters,1 Feed Roller Spline
Hub Adapter, 1 Crop Divider Spline Hub, 2 Chopper Flywheel Friction Lining Discs, 16 Feed
Roller Stop Bumpers, 2 Primary Extractor Blade Wear Gauges. Requires Code 7715 for
ocean shipment.
ATTACHMENTS FOR FIELD CONVERSION
27 February 2017 US & Canada
11-SUGARCANE- 11
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Track Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Controls:
BXT10062
Elevator Swing Foot Pedal Control Kit
609.40
Includes pedals assembly, electrical harness, and necessary hardware to be installed by dealer
or customer. Kit will allow operator to control elevator swing using the pedals in addition to
the controls on the multi-function lever.
Miscellaneous:
BXT10096
Startup Parts Package
10,450.00
Includes blades, filters and other wear items required during the harvesting season:
200 Basecutter Blades, 100 Chopper Blades, 20 Topper and Side Knife Blades, 2 Primary
Extractor Fan Blade Sets, 1 Secondary Extractor Blade Set, 1 Primary Extractor Fan Hub, 2
Engine Air Primary Filters, 1 Engine Air Secondary Filter, 3 Engine Fuel Pre-Filters, 6
Engine Oil Filters, 3 Primary and Final Fuel Filter Kits, 3 Hydraulic Oil Filters, 2 Air
Conditioning Fresh Air Filters, 2 Air Conditioning Recirculating Filters,1 Feed Roller Spline
Hub Adapter, 1 Crop Divider Spline Hub, 2 Chopper Flywheel Friction Lining Discs, 16 Feed
Roller Stop Bumpers, 2 Primary Extractor Blade Wear Gauges.
27 February 2017 US & Canada
11-SUGARCANE- 12
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Equipment for Base Machine
CH570 WHEEL CANE HARVESTER
ENGINE:
John Deere 9.0 L PowerTech with turbo-charger and
air-to-air aftercooler
Electronically controlled fuel injection
Fuel cooler
605-L fuel tank capacity
High capacity air pre-cleaner and filter
Fuel water separator
TRANSMISSION AND CONTROLS:
Two hydrostatic pumps providing variable speed 0
to 24.6 km/h (15.3 mph)
Two variable displacement motors
Electronic ground drive control
TIRES:
Front: 14 by 17.5
Rear: 23.5 by 25
BRAKES AND STEERING:
Hydrostatic steering
Oil bath brake system spring
Applied with hydraulic release
ELECTRIC SYSTEM:
200-amp alternator
12-V
TOPPER:
Cuts whole tops
Accumulator cushioned
BASECUTTER:
Hydraulic piston motor drive
Bolt-on wear plates for Basecutter legs
Two Circular discs
Five blades each
CROP DIVIDERS AND FEEDROLLERS:
Manual crop divider and knockdown roller tilt
Reversible hydraulic driven crop dividers and
feedroller system
Outer scrolls
Hydraulically driven front and lower knockdown
Rollers with manual tilt adjustment
Ten 25.4 cm (10 in.) diameter deedrollers
including the buttlifter
Factory hard surfaced feedrollers with teeth
External floating feedroller stop beneath each
feedroller cradle
Three paddle closed buttlifter
Billet control valve
CHOPPER:
Hydraulic piston motor drive,
38 cm (15 in.) chopper
95 mm blades
Sill roller
PRIMARY EXTRACTOR:
Plastic 152 cm (5 ft) primary extractor hood
Hydrostatically variable speed
Vertical mount, direct drive fan
Four blade extractor fan requires no balancing
with blade change
Hydraulically controlled hood
Abrasive resistant steel wear ring
Plastic hood wearliner
ELEVATOR:
Reinforced structural tube frame
CODE
Loading to either side
Grease cylinder elevator chain adjustment
Motor driven directional discharge
Hydraulic lift cylinders
Slew wiper
SECONDARY EXTRACTOR:
Plastic hood
Hydraulically controlled hood rotation
Hydraulically driven flap
OPERATORS STATION:
Forward tilting cab for added serviceability
pressurized cab with heater and air conditioner
Operator air suspension swivel seat and instructor
training seat
Dual tilt telescopic steering column
Full length curved safety windshield
Front windshield washer and wiper
Side glass wipers and washers
Folding arm left and right adjustable rear view
mirrors
In cab convex mirror for elevator
Two fire extinguishers; one dry chemical
One water CommandARM armrest with CommandCenter
touch display for monitoring and adjusting
harvester
Warning alarms and diagnostic information center
Multifunction control lever, floats with seat for
propulsion, elevator on and off
Basecutter, topper and crop dividers height
Elevator swing and secondary extractor hood
rotation
Bin flap position and horn
Digital cornerpost display for:
Engine coolant temperature, engine rpm
Engine horsepower percent load, fuel level
Basecutter pressure, basecutter height
Basecutter target height
Primary extractor fan speed, hydraulic oil
temperature
Parking brake indicator, ground speed
Master warning lights (MWL)
Turn signals and hazards
Signal and warning lights
Integrated AutoTrac components, AutoTrac ready
JDLink capable
OTHERS:
Compliant with all applicable standards
Anti-slip platforms in service areas
Hand rails and non-skid surfacing footing on all
service areas
Reverse alarm
Automatic self-cleaning reversing fan for
hydraulic oil and engine cooling systems
Engine compartment work light
Twelve operating lights (including headlights)
Battery remote jump start terminals
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BASE MACHINE
061AT8
CH570 Wheel Cane Harvester
0202
United States
406,412.00
DESTINATION
No Charge
Requires code 7020 or 7030 (Tier 3 Engine) and 6700 (English text decals).
0230
Australia
No Charge
Fire Extinguishers are not included.
0002
Angola
No Charge
0003
Benin
No Charge
0005
Burkina Faso
No Charge
0006
Burundi
No Charge
0007
Cameroon
No Charge
0009
Central African Republic
No Charge
0011
Chad
No Charge
0013
Congo, Republic of
No Charge
0014
Congo, Democratic Republic of
No Charge
0016
Egypt
No Charge
0017
Equatorial Guinea
No Charge
0019
Ethiopia
No Charge
0020
Gabon
No Charge
0021
Gambia
No Charge
0022
Ghana
No Charge
0023
Guinea
No Charge
0024
Guinea-Bissau
No Charge
0025
Ivory Coast
No Charge
0026
Kenya
No Charge
0028
Liberia
No Charge
0030
Madagascar
No Charge
0031
Malawi
No Charge
0034
Mauritius
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0035
Morocco
No Charge
0036
Mozambique
No Charge
0037
Namibia
No Charge
0039
Nigeria
No Charge
0042
Reunion (French Owned)
10,075.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0040
Rwanda
No Charge
0043
Senegal
No Charge
0045
Sierra Leone
No Charge
0047
South Africa
No Charge
0057
South Sudan
No Charge
0048
Sudan
No Charge
0049
Swaziland
No Charge
0050
Tanzania
No Charge
0051
Togo
No Charge
0053
Uganda
No Charge
0054
Zambia
No Charge
0055
Zimbabwe
No Charge
0070
Burma (Myanmar)
No Charge
0071
Cambodia
No Charge
0072
China
10,075.00
Requires code 7020 or 7030 (Tier 3 Engine).
Includes China Homologation and Certification. Fire Extinguishers are not included.
0231
Fiji
No Charge
0075
Indonesia
No Charge
0079
Japan
No Charge
0086
Laos
No Charge
0088
Malaysia
No Charge
0093
Pakistan
No Charge
0239
Papua New Guinea
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0094
Philippines
No Charge
0100
Sri Lanka
No Charge
0102
Taiwan
No Charge
Requires code 7020 or 7030 (Tier 3 Engine).
0104
Thailand
No Charge
Requires code 0439.
0109
Vietnam
No Charge
0182
Barbados
No Charge
0183
Belize
No Charge
0185
Costa Rica
No Charge
0188
Dominican Republic
No Charge
0189
El Salvador
No Charge
020G
Guadeloupe
10,075.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0191
Guatemala
No Charge
0192
Haiti
No Charge
0193
Honduras
No Charge
0194
Jamaica
No Charge
0195
Mexico
No Charge
0196
Nicaragua
No Charge
0197
Panama
No Charge
0201
Trinidad and Tobago
No Charge
0204
Martinique
10,075.00
Requires code 7040 or 7050 (Tier 4 Engine).
Includes CE Homologation and Certification.
0210
Argentina
No Charge
Fire Extinguishers are not included.
0211
Bolivia
No Charge
0212
Brazil
No Charge
0214
Colombia
No Charge
0215
Ecuador
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0216
Guyana
No Charge
0217
Paraguay
No Charge
0218
Peru
No Charge
0219
Suriname
No Charge
0220
Uruguay
No Charge
0221
Venezuela
No Charge
OPERATOR'S MANUAL, DECALS, AND MONITORS
Operator's Manual
0409
English
No Charge
Includes operator manual and decals in English required for USA.
0448
English - Export
No Charge
Includes operator manual in English and non-text decals.
0437
Spanish
No Charge
Includes operator manual in Spanish and text-free decals.
0413
French
No Charge
Includes operator manual in French and text-free decals.
0430
Portuguese
No Charge
Includes operator manual in Portuguese and text-free decals.
0439
Thai
No Charge
Includes operator manual in Thai and text-free decals.
0426
Simplified Chinese
No Charge
Includes operator manual in Chinese and text-free decals.
0401
Arabic
No Charge
Includes operator manual in Arabic and text-free decals.
SHIPPING PREPARATION
7710
Domestic shipping
In Base Price
Unit fully assembled with all blades installed.
7711
Mexico shipping preparation
1,198.00
Unit assembled prepared for truck transport including a support stand for the elevator.
7712
Export preparation - Wood with 6 m (20 ft) container shipment
1,957.00
Not available with Codes 6510, 6520, and 6530.
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 6.096 m (20 ft )container. The main unit is ready for
shipment as Ro-Ro or on a flat rack.
7713
Export preparation - Metal with Ro-Ro Unit
Elevator, topper, and other components are removed and packed on a metal pallet to be
shipped separately. The main unit is ready for shipment as Ro-Ro or on a flat rack.
27 February 2017 US & Canada
11-SUGARCANE- 5
2,477.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SHIPPING PREPARATION ...Continued...
7715
Export preparation - Wood with 12 m (40 ft) container shipment
1,957.00
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 12 m (40 ft) container. The main unit is ready for shipment
as Ro-Ro or on a flat rack.
FRAME
0901
Standard frame
In Base Price
0912
Standard frame - Half track mount
2,801.00
This option is required to install half track assemblies typically supplied by third party
companies in Australia. Half track assemblies are not offered by John Deere. John Deere does
not guarantee that mount will fit all half track assemblies properly. Dealer and or customer
must confirm with supplier to make sure that it will fit. Installing a half track assembly will
void the Final Drive warranty.
ENGINE
7000
John Deere 9.0 L PowerTech 251 kW (337 hp) at 2100 rpm - Tier 2
In Base Price
Option not available for USA, India, China, Taiwan or European Community (CE). It includes
the standard hydraulic system for the Basecutter and chopper circuits.
7010
John Deere 9.0 L PowerTech 280 kW (375 hp) at 2100 rpm - Tier 2 and high efficiency
hydraulics
24,050.00
Option not available for USA, India, China, Taiwan or European Community (CE). It includes
the high efficiency hydraulics for the Basecutter and chopper circuits. It is recommended for
harvesting heavy green cane or operations that require high ground speed.
7020
John Deere 9.0 L PowerTech 3 251 kW (337 hp) at 2100 rpm - Tier 3
12,409.00
Option only available for China, Taiwan and India. Option not available for USA and
European Community (CE). It includes the standard hydraulic system for the Basecutter and
chopper circuits.
7030
John Deere 9.0 L PowerTech 280 kW (375 hp) at 2100 rpm - Tier 3 and high efficiency
hydraulics
33,617.00
Option only available for China and Taiwan. Option not available for USA, European
Community (CE) or India. It includes the high efficiency hydraulics for the Basecutter and
chopper circuits. It is recommended for harvesting heavy green cane or operations that require
high ground speed.
7040
John Deere 9.0 L PowerTech 251 Kw (337 HP) at 2100 RPM - Tier 4
22,211.00
Option only available for US, Japan and CE countries. It includes the standard hydraulic
system for the Basecutter and Chopper circuits.
7050
John Deere 9.0 L PowerTech 280 Kw (375 HP) at 2100 RPM - Tier 4 and High Efficiency
Hydraulics
Option only available for USA, Japan and CE countries. It includes the high efficiency
hydraulics for the Basecutter and Chopper circuits. It is recommended for harvesting heavy
green cane or operations that require high ground speed.
CONNECTIVITY
Machine connectivity functions require cellular coverage.
Options with JDLink include the following hardware (unless otherwise noted):
- JDLink hardware: integrated cab wiring harness, antenna, and Modular Telematics Gateway
(MTG).
- 1 Ethernet harness connecting the MTG to the primary display/integrated processor.
27 February 2017 US & Canada
11-SUGARCANE- 6
39,331.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CONNECTIVITY ...Continued...
- 1 Ethernet harness routed from the MTG to the optional display port.
Features will vary depending on the option selected. See sales manual for more information.
Subscription length of contract varies; Subscription renewal required after term of service for
continued functionality.
Option availability limited by specific geographical regions. Please refer to region and country
specific price page section for appropriate order codes.
1885
JDLink Capable
In Base Price
Includes cab wiring harness Ethernet harnesses and integrated cab wiring harness. Requires
field kit installation, antenna, activation, and subscription for JDLink functionality
Not available in United States or Australia.
188I
JDLink Connect - Subscription not included
No Charge
Includes JDLink hardware, ethernet harness.
Does not include a JDLink Connect subscription.
Only available in the United States and Australia, through dealers that do not meet New Model
Qualification (NMQ) requirements.
188J
JDLink Connect - 1 Year subscription included
No Charge
Includes JDLink hardware, a 50 hour JDLink Ultimate remote display access (RDA),
temporary subscription, 1 year JDLink Connect subscription, ethernet harness when
GreenStar 3 (GS3) 2630 Display is mounted on cornerpost, ethernet cable (order from service
parts) is required to connect display to Modular Telematics Gateway (MTG).
Use of this service, and all rights and obligations of John Deere and the customers (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable services and software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available in the United States and Australia through dealers that meet New Model
Qualification (NMQ) requirements.
188U
JDLink Hardware only - Subscription Not Included
No Charge
Includes JDLink hardware: integrated cab wiring harness, antenna, modular telematics
gateway (MTG), Ethernet harnesses, and Machine Communication Radio antenna harness.
Ethernet harnesses may vary per configuration.
Does not include a JDLink Subscription.
Requires subscription for JDLink functionality. Subscription availability through dealers that
meet New Model Qualification requirements. Subscription sales process may vary by country.
Only available in the United States and Australia, for customers who do not choose to use the
JDLink service and dealers that do not meet New Model Qualification requirements.
188N
JDLink Connect Upgrade 1 Year plus JDLink Access + RDA 5 Year subscription
No Charge
Includes JDLink hardware, a 50 hour JDLink Access + RDA temporary subscription, 1 year
JDLink Connect Upgrade subscription, 5 years JDLink Access + RDA subscription (5 total
years subscription), and Ethernet harnesses. and Machine Communication Radio antenna
harness. Does not include the Machine Communication Radio and antenna.
Note: When GreenStar 3 2630 Display is mounted on cornerpost, Ethernet cable (order from
Service parts) is required to connect Display to MTG.
Use of this service, and all rights and obligations of John Deere and the Customer (as
identified in the applicable agreement), are governed by the terms and conditions outlined in
the applicable Services and Software agreements available at
www.JohnDeere.com/Agreements. If these terms and conditions are not agreeable do not
proceed and do not use the service.
Only available through dealers that meet New Model Qualification requirements.
Only available in United States and Australia.
WHEELS AND TIRES
6600
Michelin front tires and Galaxy (GPX) rear tires
Front: Michelin 360/70R17.5 AT (Radial).
27 February 2017 US & Canada
11-SUGARCANE- 7
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
WHEELS AND TIRES ...Continued...
Rear: GPX 23.5 by 25 (20-ply) industrial tire with agricultural lug.
6610
Michelin front tires and Michelin rear tires
3,637.00
Front: Michelin 360/70R17.5 AT (Radial).
Rear: Michelin 23.5R25 XTLA (Radial).
BASECUTTER HEIGHT CONTROL AND CROP DIVIDERS FLOAT
CONTROL
3200
Standard Basecutter height control (manual) and crop dividers without floating control
3220
Standard Basecutter height control (manual) and floating crop dividers
In Base Price
9,104.00
The floating control system allows the crop dividers to float following the interrow ground
profile. Good field preparation is needed for optimum performance.
3230
Contour Basecutter height control and floating crop dividers
13,388.00
The floating control system allows the crop dividers to float following the inter-row ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses basecutter pressure and the crop dividers
position as a reference of the ground height. Good field preparation is needed for optimum
performance.
CANE TOPPER
5000
Whole topper
5010
Shredder topper
In Base Price
6,869.00
Recommended for green cane harvesting. Shredded tops are spread out better in the field, are
easier to incorporate in the soil when cultivating, and decompose faster.
5030
Extended width whole topper (same as 3522)
4,714.00
Wider dimensions improve leaves and tops gathering.
CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT
5200
Manual crop divider and knockdown roller tilt
5210
Hydraulic crop divider and knockdown rollers tilt
In Base Price
4,567.00
With this option, the crop dividers and the front and lower knock down rollers angle can be
adjusted quickly from the cab to adapt to different cane conditions in the field.
CROP DIVIDERS SIDE KNIVES
5350
Less Side Knives
In Base Price
Recommended for light and straight cane.
5355
With Side Knives
4,607.00
Recommended for lodged and tangled cane. Stalks not separated upon reaching the side knives
are cut before the harvester pulls them from the ground. Includes hydraulic position
adjustment. Requires option 5210 (Hydraulic Tilt).
BASE CUTTER DISC
5600
61 cm (24 in.) circular
In Base Price
27 February 2017 US & Canada
11-SUGARCANE- 8
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BASE CUTTER DISC ...Continued...
For dry harvesting conditions. Provides a cleaner cut on stubble.
5610
55.9 cm (22 in.) steel circular
Same Price
Aides in the removal of rocks, soil and other extraneous material.
BASE CUTTER LEGS
5650
Standard legs
In Base Price
5660
Breakaway Basecutter legs
2,441.00
Fuse will break to prevent major Basecutter damage.
BUTTLIFTER
5700
Three Paddle Closed Buttlifter
5720
Three Paddle Open Buttlifter
In Base Price
468.00
Minimizes soil intake and mud buildup.
5730
Four Bar Open Buttlifter
551.00
Minimizes soil intake and mud buildup.
DIFFERENTIAL CHOPPER
5900
38 cm (15 in.) 95 mm eight blade chopper system
In Base Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 in.).
5910
38 cm (15 in.) 95 mm six blade chopper system
Same Price
Average billet lengths of approximately 230 to 250 mm (9 to 10 in.).
5920
38 cm (15 in.) 95 mm eight blade overlap chopper
Same Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 in.). Improves feeding, increases
the life of the blades, and facilitates trash removal in the primary extractor.
5930
38 cm (15 in.) 95 mm ten blade overlap chopper
Same Price
Average billet lengths of approximately 150 to 180 mm (6 to 7 in.). Shorter billets will increase
cane density in wagon. Overlap chopper improves feeding, increases the life of the blades, and
facilitates trash removal in the primary extractor.
SILL ROLLER
6010
Sill roller
In Base Price
Facilitates billet movement, increases cleaning, and avoids back feeding.
PRIMARY EXTRACTOR
6100
Abrasive resistant steel wear ring
6110
Duraliner (Vidaplate) steel wear ring
Highly abrasive resistant material prolongs the life of the wear ring.
SECONDARY EXTRACTOR
27 February 2017 US & Canada
11-SUGARCANE- 9
In Base Price
3,412.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SECONDARY EXTRACTOR ...Continued...
6400
Secondary extractor with motor driven directional discharge (1650 rpm)
In Base Price
Requires Code 7000, 7020 or 7040.
6420
Secondary extractor with motor driven directional discharge - High performance (1900 rpm)
600.00
Requires Code 7010, 7030 or 7050.
6430
Less secondary extractor
-2,147.00
Includes a metal hood that replaces the plastic hood.
ELEVATOR EXTENSION
6500
No elevator extension
In Base Price
Recommended for row spacing between 1.4 and 1.6 meters.
6510
30 cm (12 in.) elevator extension installed
2,767.00
Requires Code 7713 or 7715 for ocean shipment.
Recommended for row spacing between 1.6 and 1.7 m.
6520
61 cm (24 in.) elevator extension installed
3,932.00
Requires Code 6430. Requires Code 7713 or 7715 for ocean shipment.
Recommended for row spacing between 1.7 and 1.8 m.
HYDRAULICS
3100
Standard - 10W30 motor oil
3110
RYKON 68 hydraulic fluid
8610
Whole Topper Collector Extension
In Base Price
808.00
WHOLE TOPPER COLLECTOR EXTENSION
613.00
Requires Code 5000.
Improves standard topper performance in heavy cane. It also helps handling cane flowers.
CROP DIVIDER VINE CUTTER KNIVES
8030
Crop divider vine cutter knives
482.00
Prevent vines from wrapping around crop dividers.
ELEVATOR SPEED CONTROL
8640
Elevator Speed Control
1,342.00
Allows the operator to reduce the speed of the elevator in light crops thus reducing chain,
floor, wearstrip, sprocket, and bearing wear.
MISCELLANEOUS
8246
LED lighting - Auxiliary for loading wagon
1,266.00
Replaces the four base halogen lights located on cooling package and elevator with four LED
lights. It also includes a topper boom light to service basecutter and front end components.
8813
Premium Radio w/ Bluetooth
MISCELLANEOUS
27 February 2017 US & Canada
11-SUGARCANE- 10
290.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
MISCELLANEOUS ...Continued...
9420
Rotary hand pump for hydraulic oil
205.00
Recommended to fill up hydraulic tank when needed.
9400
Daily service tool kit
570.00
Includes basic tools.
9410
Deluxe tool kit (includes 9400 daily service tool kit)
1,138.00
Includes Daily Service Tool Kit (code 9400) and Supplemental Tools.
9430
Spanish language for USA
No Charge
Includes operator manual in Spanish and Spanish text decals to be installed by dealer or
customer in addition to operator manual and decals in English factory installed as per Code
6700.
9450
Beacon lights
213.00
Includes two beacon lights.
9475
Elevator swing foot pedal control kit
517.00
Includes pedals assembly, electrical harness, and necessary hardware to be installed by dealer
or customer. Kit will allow operator to control elevator swing using the pedals in addition to
the controls on the multi-function lever.
95BW
Extended engine warranty 5 Year or 5,000 hours whichever occurs first
3,506.00
For USA market only.
9500
Startup Parts Package
10,000.00
Includes blades, filters and other wear items required during the harvesting season:
200 Basecutter Blades, 100 Chopper Blades, 20 Topper and Side Knife Blades, 2 Primary
Extractor Fan Blade Sets, 1 Secondary Extractor Blade Set, 1 Primary Extractor Fan Hub, 2
Engine Air Primary Filters, 1 Engine Air Secondary Filter, 3 Engine Fuel Pre-Filters, 6
Engine Oil Filters, 3 Primary and Final Fuel Filter Kits, 3 Hydraulic Oil Filters, 2 Air
Conditioning Fresh Air Filters, 2 Air Conditioning Recirculating Filters,1 Feed Roller Spline
Hub Adapter, 1 Crop Divider Spline Hub, 2 Chopper Flywheel Friction Lining Discs, 16 Feed
Roller Stop Bumpers, 2 Primary Extractor Blade Wear Gauges. Requires Code 7715 for
ocean shipment.
ATTACHMENTS FOR FIELD CONVERSION
Controls:
BXT10062
Elevator Swing Foot Pedal Control Kit
609.40
Includes pedals assembly, electrical harness, and necessary hardware to be installed by dealer
or customer. Kit will allow operator to control elevator swing using the pedals in addition to
the controls on the multi-function lever.
Miscellaneous:
BXT10096
Startup Parts Package
10,450.00
Includes blades, filters and other wear items required during the harvesting season:
200 Basecutter Blades, 100 Chopper Blades, 20 Topper and Side Knife Blades, 2 Primary
Extractor Fan Blade Sets, 1 Secondary Extractor Blade Set, 1 Primary Extractor Fan Hub, 2
Engine Air Primary Filters, 1 Engine Air Secondary Filter, 3 Engine Fuel Pre-Filters, 6
Engine Oil Filters, 3 Primary and Final Fuel Filter Kits, 3 Hydraulic Oil Filters, 2 Air
Conditioning Fresh Air Filters, 2 Air Conditioning Recirculating Filters,1 Feed Roller Spline
Hub Adapter, 1 Crop Divider Spline Hub, 2 Chopper Flywheel Friction Lining Discs, 16 Feed
Roller Stop Bumpers, 2 Primary Extractor Blade Wear Gauges.
27 February 2017 US & Canada
11-SUGARCANE- 11
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH570 Wheel Cane Harvester
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
11-SUGARCANE- 12
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Equipment for Base Machine
CH530 Cane Harvester
ENGINE:
John Deere# 6068H, PowerTech# E, Tier 3 with
turbo-charger and air-to-air aftercooler 152 Kw
(204 hp)
Electronically controlled fuel injection
Fuel cooler 284 L Fuel tank capacity
High capacity air pre-cleaner and filter
30 micron primary fuel filter with water separator
Two micron secondary fuel filter
TRANSMISSION AND CONTROLS:
Permanent four-wheel drive
Two hydrostatic pumps propel four-wheel motors and
provides variable speed
Three speed ranges with shift on the go
Traction slip prevention control system
Electronic ground drive control
Maximum traveling speed of 18 km/h (11.2 mph)
TIRES:
Front: 340/80 R20
Rear: 600/70 R28
BRAKES AND STEERING:
Hydrostatic steering on front frame articulation
with synchronized steering linkage
Dynamic hydrostatic braking system with foot pedal
Oil bath park brake systems Spring Applied with
hydraulic release
ELECTRIC SYSTEM:
200 amp alternator 12 V
TOPPER:
Cuts whole tops Accumulator cushioned
Collector drums
BASECUTTER:
Double hydraulic piston motor drive
Bolt-on wear plates for basecutter legs
Two 61 cm (24 in.) circular discs, five blades each
CROP DIVIDERS AND FEEDROLLERS:
Lower knockdown roller
Reversible hydraulic driven crop dividers and
feedroller system
Crop divider knockdown rollers Nine 25.4 cm (10
in.) diameter feedrollers,
Including the buttlifter
Factory hard surfaced feedrollers with teeth
External floating feedroller stop beneath
Each feedroller cradle
Closed buttlifter
CHOPPER:
Double hydraulic motor drive 30 cm (12 in.) overlap
chopper system
Six 95 mm blades
EXTRACTOR:
Plastic 120 cm (4 ft) primary extractor hood
Hydrostatic drive with variable speed
CODE
Vertical mount, direct drive fan
Four blade extractor fan
Requires no balancing with blade change
Hydraulically controlled hood
Abrasive resistant steel wear ring
ELEVATOR:
Adjustable folding elevator with a hydraulically
variable range of discharge positions
Heavy duty aluminum construction
Loading to either side Grease cylinder elevator
chain adjustment
In cab controlled variable speed elevator
Hydraulic driven elevator discharge flap
Perforated steel floor
OPERATORS STATION:
Forward tilting cab for added serviceability
Pressurized cab with heater and air conditioner
Operator air suspension seat with instructor and
training seat
Full length curved laminated safety windshield
Front windshield washer and wiper
Adjustable left and right rear view mirrors
In cab convex mirror for elevator
One fire extinguisher
CommandARM# armrest with CommandCenter# touch
display for Monitoring and adjusting harvester and
engine parameters.
Warning alarms and diagnostic information center
Multifunction hydro handle, floats with seat, for
Propulsion,
Basecutter, topper and crop dividers height,
elevator flap position and horn Digital cornerpost
display for: Engine coolant temperature, engine
rpm, Engine horsepower percent load, fuel level,
Basecutter pressure, basecutter height, basecutter
target height Primary extractor fan speed,
Hydraulic oil temperature Parking brake indicator,
ground speed Master warning lights (MWL), turn
signals and hazards Signal and warning lights
OTHERS:
Anti-slip platforms in service areas
Compliant with all applicable standards
Hand rails and non skid surfaces on all service
areas
Reverse alarm Variable speed cooling fan
Automatic self-cleaning reversing fan for Hydraulic
oil and engine cooling systems
Engine compartment work light 12 operating lights
(including headlights)
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
064AT8
CH530 Sugar Cane Harvester
27 February 2017 US & Canada
11-SUGARCANE- 1
367,695.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION
0002
Angola
No Charge
0003
Benin
No Charge
0005
Burkina Faso
No Charge
0006
Burundi
No Charge
0007
Cameroon
No Charge
0009
Central African Republic
No Charge
0011
Chad
No Charge
0013
Congo, Republic of
No Charge
0014
Congo, Democratic Republic of
No Charge
0016
Egypt
No Charge
0017
Equatorial Guinea
No Charge
0019
Ethiopia
No Charge
0020
Gabon
No Charge
0021
Gambia
No Charge
0022
Ghana
No Charge
0023
Guinea
No Charge
0024
Guinea-Bissau
No Charge
0025
Ivory Coast
No Charge
0026
Kenya
No Charge
0028
Liberia
No Charge
0030
Madagascar
No Charge
0031
Malawi
No Charge
0034
Mauritius
No Charge
0035
Morocco
No Charge
0036
Mozambique
No Charge
0037
Namibia
No Charge
0039
Nigeria
No Charge
0040
Rwanda
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0043
Senegal
No Charge
0045
Sierra Leone
No Charge
0047
South Africa
No Charge
0048
Sudan
No Charge
0049
Swaziland
No Charge
0050
Tanzania
No Charge
0051
Togo
No Charge
0053
Uganda
No Charge
0054
Zambia
No Charge
0055
Zimbabwe
No Charge
0057
South Sudan
No Charge
0071
Cambodia
No Charge
0074
India
No Charge
Requires Code 0448 and 9145
0075
Indonesia
No Charge
0086
Laos
No Charge
0088
Malaysia
No Charge
0093
Pakistan
No Charge
0094
Philippines
No Charge
0100
Sri Lanka
No Charge
0102
Taiwan
No Charge
0104
Thailand
No Charge
Requires Code 0439
0109
Vietnam
No Charge
0182
Barbados
No Charge
0183
Belize
No Charge
0185
Costa Rica
No Charge
0188
Dominican Republic
No Charge
0189
El Salvador
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0191
Guatemala
No Charge
0192
Haiti
No Charge
0193
Honduras
No Charge
0194
Jamaica
No Charge
0195
Mexico
No Charge
0196
Nicaragua
No Charge
0197
Panama
No Charge
0201
Trinidad & Tobago
No Charge
0210
Argentina
No Charge
0211
Bolivia
No Charge
0214
Colombia
No Charge
0215
Ecuador
No Charge
0216
Guyana
No Charge
0217
Paraguay
No Charge
0218
Peru
No Charge
0219
Suriname
No Charge
0220
Uruguay
No Charge
0221
Venezuela
No Charge
0230
Australia
No Charge
0231
Fiji
No Charge
0239
Papua New Guinea
No Charge
0448
English
OPERATOR'S MANUAL, DECALS, AND MONITORS
No Charge
Includes non-text decals and English Operator Manual
0437
Spanish
No Charge
Includes non-text decals and Spanish Operator Manual
0413
French
No Charge
Includes non-text decals and French Operator Manual
0439
Thai
No Charge
Includes non-text decals and Thai Operator Manual
27 February 2017 US & Canada
11-SUGARCANE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SHIPPING PREPARATION
7710
Domestic shipping
In Base Price
Unit fully assembled with all blades installed.
7711
Export prep - Mexico shipping
1,198.00
Unit assembled prepared for truck transport.
7712
Export Prep - Wood w 20 ft container shipment
1,958.00
Elevator, crop dividers, topper, hand rails and other components are removed and packed on a
wooden pallet to be shipped in a 508 m (20 in.) container. The main unit is ready for shipment
as ro-ro or on a flat rack.
7713
Export prep - Metal with ro-ro unit
2,478.00
Elevator, topper and other components are removed and packed on a metal pallet to be
shipped separately. The main unit is ready for shipment as ro-ro or on a flat rack.
7715
Export prep - Containerized shipment
5,787.00
Core machine, cab, cooling package, elevator, primary extractor, crop dividers, topper, hand
rails and other components are packed unassembled on metal skid to be shipped in a 1016 m
(40 in.) container. Dealer certification specific to this option is required to order 7715. Dealer
is also required to previously purchase the following lifting devices that can only be ordered
using the manual stock order process (MSO) from the Thibodaux factory: cooling package
lifting device (part number IMD139418), cab lifting device (part number IMD167750), and
elevator lifting device (part number IMD168292).
MISCELLANEOUS
9110
Daily service tool kit
548.00
Includes basic tools.
9105
Rotary Hand Pump For Hydraulic Oil
205.00
Recommended to fill up hydraulic tank when needed.
9145
Universal Homologation Kit
1,019.00
Includes India and China homologation components
9155
Rear Axle Extension
3,000.00
With this option the rear tread is 1.80 m. Includes extensions for axle, brushrails and hydraulic
tubes plus all necessary hardware
CROP DIVIDER, KNOCKDOWN ROLLERS
9130
Front knockdown roller - Hydraulically adjustable
3,965.00
Recommended for heavy, lodged and tangled cane.
9120
Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife
8,679.00
Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction of
the inside scrolls to push the cane of the adjacent row away from the machine. Stalks not
separated upon reaching the side knives are cut before the harvester pulls them from the
ground.
9125
Right Hand and Left Hand Outer Scrolls and Less Side Knives
5,680.00
Recommended for light and lodged cane. The outside scrolls rotate in opposite direction of the
inside scrolls to push the cane of the adjacent row away from the machine.
CROP DIVIDER VINE CUTTER KNIVES
9135
Crop divider vine cutter knives
27 February 2017 US & Canada
11-SUGARCANE- 5
409.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH530 Sugar Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CROP DIVIDER VINE CUTTER KNIVES ...Continued...
Prevent vines from wrapping around crop dividers.
27 February 2017 US & Canada
11-SUGARCANE- 6
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
Attachments for 3510, 3520 Track and Wheel Cane Harvesters
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION
Engine:
CB11497417
8.1L to 9L Conversion Kit - Non EGR
48,155.80
Not available in countries requiring Tier III Emission Standards. The United States and
European countries do not allow these engines to be installed in off-road equipment. Please
check your local regulations before placing an order.
CB21500447
Field Cruise - 9.0L (3520)
213.40
Field Cruise maintains a constant engine speed and thus constant ground speed
as the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to
15% when working in light cane. Enables the operator to set the RPM to 2200 while cutting
heavy cane or while working in unfavorable field conditions.
CB11494506
Reversible Fan Software Change Kit (3510 with ABC)
1,157.20
This kit includes the connecting cable and the necessary software to reprogram the ABC when
installing Kit CB21486716. It can be used repeatedly to reprogram multiple units.
CB21486716
Reversing Fan Kit (3510 with ABC)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity. (Kit CB11494506 is required)
CB21486717
Reversing Fan Kit (3510 without ABC)
6,589.00
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
CB21491891
Reversing Fan Kit (3520)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
Extractors:
BXT10073
CH570 Primary Extractor Fan Kit
2,239.60
The kit has all the necessary parts to modify a 3520 primary extractor fan to a CH570 design.
It includes a conical hub cover that reduces air voids and recirculation and wide-design blades
that produce more airflow at lower RPM requiring less horsepower. The hard-surfaced blades
combined with operating at lower speed results in longer blade life. Cleaning is also improved
in most cane and field conditions.
Feed:
BXT10022
Contour Basecutter Height Control and Floating Crop Dividers Kit
The floating control system allows the crop dividers to "float" following the interrow ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses the crop dividers position as a reference
of the ground height. Good field preparation is needed for optimum performance.
Kit includes all necessary software, mountings, hoses, fittings and hardware to be installed on
3520 units starting S/N 1T83520TCCT120704.
Dealer needs to communicate with factory for software installation.
Supplementary kit BXT10023 will be needed for units outside Louisiana, USA before S/N
1T83520WCDW121023.
A Supplementary kit (BXT10024 or BXT10025) will be needed for all units in Louisiana,
before S/N 1T83520WCDW121023.
27 February 2017 US & Canada
11-SUGARCANE- 1
14,726.80
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
Attachments for 3510, 3520 Track and Wheel Cane Harvesters
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXT10023
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
2,911.70
Kit includes all necessary components to complement Kit BXT10022 when installing on 3520
units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023 (not for Louisiana
harvesters - see BXT10024 and BXT10025).
BXT10024
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
3,107.50
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023.
BXT10025
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
150.70
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units starting S/N 1T83520TCDT121201.
Miscellaneous:
BXT10096
Startup Parts Package
10,450.00
Includes blades, filters and other wear items required during the harvesting season:
200 Basecutter Blades, 100 Chopper Blades, 20 Topper and Side Knife Blades, 2 Primary
Extractor Fan Blade Sets, 1 Secondary Extractor Blade Set, 1 Primary Extractor Fan Hub, 2
Engine Air Primary Filters, 1 Engine Air Secondary Filter, 3 Engine Fuel Pre-Filters, 6
Engine Oil Filters, 3 Primary and Final Fuel Filter Kits, 3 Hydraulic Oil Filters, 2 Air
Conditioning Fresh Air Filters, 2 Air Conditioning Recirculating Filters,1 Feed Roller Spline
Hub Adapter, 1 Crop Divider Spline Hub, 2 Chopper Flywheel Friction Lining Discs, 16 Feed
Roller Stop Bumpers, 2 Primary Extractor Blade Wear Gauges.
Topper:
BXT10012
Extended Width Whole Topper
Same Topper than the one used on the 3522 harvester. Extra width allows better tops
gathering for improved cleaning. Overall width is 2.4 m (93.1#) compared to 1.8 m (71.5#) on
the Standard whole topper. Kit includes the complete topper assembly to be mounted on a
3520 harvester existing boom in lieu of the factory installed topper.
27 February 2017 US & Canada
11-SUGARCANE- 2
7,187.40
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Equipment for Base Machine
3520 TRACK SUGARCANE BILLET HARVESTER
ENGINE:
John Deere 9.0 L PowerTech
with Turbo-Charger and Air-to-Air Aftercooler
251 Kw (337 hp) at 2100 RPM
Electronically Controlled Fuel Injection
Fuel Cooler
605 Liter Fuel Tank Capacity
High Capacity Air Pre-Cleaner and Filter
Fuel Water Separator
TRANSMISSION AND CONTROLS:
Two Hydrostatic Pumps Providing
Variable Speed
0 to 9.0 km/h (5.6 mph)
Two Fixed Displacement Motors
Electronic Ground Drive Control
Requires No Balancing with Blade Change
Hydraulically Controlled Hood
Abrasive Resistant Steel Wear Ring
Plastic Hood Wearliner
ELEVATOR:
Reinforced Structural Tube Frame
Loading to Either Side
Grease Cylinder Elevator Chain Adjustment
Motor Driven Directional Discharge
Hydraulic Lift Cylinders
Slew Wiper
SECONDARY EXTRACTOR:
Plastic Hood
Hydraulically Controlled Hood Rotation
Hydraulically Driven Flap
TRACKS:
Standard Sealed Chain
18 In. Straight Shoes
Eight Bottom Rollers and
One Carrier Roller
Single Piece Bolt on Sprocket
Thru Bolts Mounting Bottom Rollers
to Track Frame
BRAKES AND STEERING:
Steering Control is Obtained by Varying
the Propulsion Pumps Displacement
with a Steering Wheel
Oil Bath Brake System Spring
Applied with Hydraulic Release
ELECTRIC SYSTEM:
200 Amp Alternator
12 Volt
TOPPER:
Cuts Whole Tops
Accumulator Cushioned
BASECUTTER:
Hydraulic Piston Motor Drive
Bolt-On Wear Plates for Basecutter Legs
Two 61 cm (24 In.) Circular Discs,
Five Blades Each
CROP DIVIDERS AND FEEDROLLERS:
Manual Crop Divider and Knockdown Roller Tilt
Reversible Hydraulic Driven Crop Dividers
and Feedroller System
Ten 25.4 cm (10 In.) Diameter Feedrollers,
Including the Buttlifter
Factory Hard Surfaced Feedrollers with Teeth
External Floating Feedroller Stop Beneath
Each Feedroller Cradle
Three Paddle Closed Buttlifter
Billet Control Valve
CHOPPER:
Hydraulic Radial Piston Drive
38 cm (15 In.) Differential Chopper
Eight 95 mm Blades
Sill Roller
PRIMARY EXTRACTOR:
Plastic 152 cm (5 Ft.) Primary Extractor Hood
Hydrostatically Variable Speed
Vertical Mount, Direct Drive Fan
Four Blade Extractor Fan -
OPERATORS STATION:
Forward Tilting Cab for Added Serviceability
Pressurized Cab with Heater
and Air Conditioner
Operator Air Suspension Seat and
Instructor/Training Seat
Full Length Curved Safety Windshield
Front Windshield Washer and Wiper
Left and Right Adjustable Rear View Mirrors Adjustable Width
One Fire Extinguisher
CommandARM armrest with:
CommandCenter Touch Display for:
Monitoring and Adjusting Harvester
and Engine Parameters
Warning Alarms and Diagnostic
Information Center
Multifunction Hydro Handle, Floats
with Seat, for:
Propulsion
Basecutter, Topper and Crop Dividers Height,
Bin Flap Position and Horn
Digital Cornerpost Display for:
Engine Coolant Temperature, Engine RPM
Engine Horsepower Percent Load, Fuel Level,
Basecutter Pressure, Basecutter Height,
Basecutter Target Height
Primary Extractor Fan Speed, Hydraulic
Oil Temperature
Parking Brake Indicator, Ground Speed
Master Warning Lights (MWL),
Turn Signals/Hazards
Signal and Warning Lights
Integrated AutoTrac Components, AutoTrac Ready
OTHERS:
Anti-Slip Platforms in Service Areas
Compliant with All Applicable ASAE Standards
Hand Rails and High Grip Eruption Plate Footing
on All Service Areas
Reverse Alarm
Automatic Self-Cleaning Reversing Fan for
Hydraulic Oil and Engine Cooling Systems
Engine Compartment Work Light
10 Operating Lights (including Headlights)
Battery Remote Jump Start Terminals
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
0583T8
3520 Track Sugarcane Billet Harvester
441,952.00
MAIN FRAME
0901
Standard Frame
In Base Price
0911
Track Frame with 10 Inch Lift (Louisiana)
5,540.00
Recommended for row profile higher than 164 m (6.45 In.). Base Cutter Disc clearance at its
lowest position is 164 mm (6.45 In.) and 638 mm (25.1 In.) at its highest position.
0921
Standard Frame/Wide Track Frame - 508 mm (20 In.) Shoe
1,995.00
This option is necessary to install 508 mm (20 In.) wide shoes (Code 2030).
ENGINE
1000
John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 2
In Base Price
Option not available for USA, India, or CE. It includes the standard hydraulic system for the
Base Cutter and Chopper circuits.
1010
John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 2 and High Efficiency
Hydraulics
22,905.00
Option not available for USA, India, or CE. It includes the high efficiency hydraulics for the
Base Cutter and Chopper circuits. It is recommended for harvesting heavy green cane or
operations that require high ground speed.
1020
John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 3
9,500.00
Option only available for USA, India, and CE. It includes the standard hydraulic system for the
Base Cutter and Chopper circuits. Option not available for CE countries for arrival at
destination port after December 31st 2013.
1030
John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 3 and High Efficiency
Hydraulics
31,321.00
Option only available for USA. It includes the high efficiency hydraulics for the Base Cutter
and Chopper circuits. It is recommended for harvesting heavy green cane or operations that
require high ground speed.
TRACK CHAIN AND SHOES
2000
Standard Chain with 18 In. Straight Shoes
In Base Price
2010
Standard Chain with 16 In. Bent Shoes
1,391.00
2020
Standard Chain with 18 In. Bent Shoes
1,612.00
2030
Standard Chain with 20 In. Bent Shoes
2,456.00
Requires Code 0921.
2040
Sealed and Lubricated Chain with 16 In. Bent Shoes
27 February 2017 US & Canada
11-SUGARCANE- 2
4,927.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TRACK CHAIN AND SHOES ...Continued...
2050
Sealed and Lubricated Chain with 18 In. Bent Shoes
3000
Standard Homologation
4,237.00
HOMOLOGATION AND CE CERTIFICATION
In Base Price
Not available for CE.
3010
CE Certification
1,929.00
Requires Code 1020.
HYDRAULIC OIL
3100
Standard - 10W30 Motor Oil
3110
RYKON 68 Hydraulic Fluid
In Base Price
769.00
BASECUTTER HEIGHT CONTROL AND CROP DIVIDERS FLOAT
CONTROL
3200
Standard Basecutter Height Control (Manual) and Crop Dividers without Floating Control
3220
Standard Basecutter Height Control (Manual) and Floating Crop Dividers
In Base Price
8,670.00
The floating control system allows the crop dividers to "float" following the interrow ground
profile. Good field preparation is needed for optimum performance.
3230
Contour Basecutter Height Control and Floating Crop Dividers
12,750.00
The floating control system allows the crop dividers to "float" following the interrow ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses the crop dividers position as a reference
of the ground height. Good field preparation is needed for optimum performance.
CANE TOPPER
5000
Whole Topper
5010
Shredder Topper
In Base Price
6,541.00
Recommended for green cane harvesting. Shredded tops are spread out better in the field, are
easier to incorporate in the soil when cultivating, and decompose faster.
5020
Shredder Topper with Piston Motor
8,555.00
Requires Code 1010 or 1030.
Recommended for heavy green cane harvesting. Shredded tops are spread out better in the
field, are easier to incorporate in the soil when cultivating and decompose faster. The
Hydraulic Piston Motor replaces the Standard Shredder Topper (Code 5020) gear motor to
give the topper additional power to cut the tops.
5030
Extended Width Whole Topper (Same as 3522)
4,488.00
Wider dimensions improve leaves and tops gathering.
CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT
5200
Manual Crop Divider and Knockdown Roller Tilt
27 February 2017 US & Canada
11-SUGARCANE- 3
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT
...Continued...
5210
Hydraulic Crop Divider and Knockdown Roller Tilt
3,802.00
With this option, the Crop Dividers and the Front Knock Down Roller angle can be adjusted
quickly from the cab to adapt to different cane conditions in the field.
OUTER SCROLLS AND KNIVES
5300
Less Outer Scrolls and Less Side Knives
In Base Price
Recommended for light and straight cane.
5310
Right Hand Outer Scrolls and Right Hand Side Knife
5,880.00
Recommended for lodged and tangled cane and when the elevator is always positioned to load
the wagon to the left hand side of the harvester. The outside scroll rotates in opposite
direction of the right hand inside scroll to push the cane of the adjacent row away from the
machine. Stalks not separated upon reaching the side knives are cut before the harvester pulls
them from the ground.
5330
Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife
10,505.00
Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction of
the inside scrolls to push the cane of the adjacent row away from the machine. Stalks not
separated upon reaching the side knives are cut before the harvester pulls them from the
ground.
5340
Right Hand and Left Hand Outer Scrolls and Less Side Knives
6,899.00
Recommended for light and lodged cane. The outside scrolls rotate in opposite direction of the
inside scrolls to push the cane of the adjacent row away from the machine.
CROP DIVIDER/KNOCK DOWN ROLLERS
5500
Less Crop Divider Knock Down Rollers
In Base Price
Recommended for light and straight cane.
5510
With Crop Divider Knock Down Rollers
3,753.00
Recommended for tall and/or lodged cane. These rollers help gently guide long, wrapping
cane to the center of the harvester's throat, which minimizes cane buildup at the top of the crop
divider.
BASE CUTTER DISC
5600
61 cm (24 In.) Circular
In Base Price
For dry harvesting conditions and provides a cleaner cut on stubble.
5610
55.9 cm (22 In.) Steel Circular
Same Price
Aids in the removal of rocks, soil, and other extraneous material.
5620
55.9 cm (22 In.) Scalloped
1,241.00
Aids in the removal of rocks, soil and other extraneous material.
BASE CUTTER LEGS
5650
Standard Legs
In Base Price
5660
Breakaway Basecutter Legs
Fuse will break to prevent major basecutter damage.
27 February 2017 US & Canada
11-SUGARCANE- 4
2,324.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BUTTLIFTER
5700
3 Paddle Closed Buttlifter
5720
3 Paddle Open Buttlifter
In Base Price
445.00
Minimizes soil intake and mud buildup.
5730
4 Bar Open Buttlifter
524.00
Minimizes soil intake and mud buildup.
DIFFERENTIAL CHOPPER
5900
38 cm (15 In.) 95 mm Eight Blade Chopper System
In Base Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 In.).
5910
38 cm (15 In.) 95 mm Six Blade Chopper System
Same Price
Average billet lengths of approximately 230 to 250 mm (9 to 10 In.).
5920
38 cm (15 In.) 95 mm Eight Blade Overlap Chopper
Same Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 In.). Improves feeding,
increases the life of the blades, and facilitates trash removal in the primary extractor.
5930
38 cm (15 In.) 95 mm Ten Blade Overlap Chopper
2,397.00
Average billet lengths of approximately 150 to 180 mm (6 to 7 In.). Shorter billets will increase
cane density in wagon. Overlap chopper improves feeding, increases the life of the blades, and
facilitates trash removal in the primary extractor.
SILL ROLLER
6010
Sill Roller
In Base Price
Facilitates billet movement, increases cleaning, and avoids "back feeding".
PRIMARY EXTRACTOR WEAR RING
6100
Abrasive Resistant Steel Wear Ring
6110
Duraliner (Vidaplate) Steel Wear Ring
In Base Price
3,248.00
Highly abrasive resistant material prolongs the life of the wear ring.
SECONDARY EXTRACTOR
6400
Secondary Extractor with Motor Driven Directional Discharge (1650 RPM)
In Base Price
Requires Code 1000 or 1020.
6420
Secondary Extractor with Motor Driven Directional Discharge - High Performance (1900
RPM)
570.00
Requires Code 1010 or 1030.
6430
Less Secondary Extractor
-2,257.00
Includes a metal hood that replaces the plastic hood.
ELEVATOR EXTENSION
6500
No Elevator Extension
In Base Price
Recommended for row spacing between 1.4 and 1.6 meters.
27 February 2017 US & Canada
11-SUGARCANE- 5
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ELEVATOR EXTENSION ...Continued...
6510
30cm (12 In.) Elevator Extension Installed
2,634.00
Requires Code 6930 or 6940 for ocean shipment.
Recommended for row spacing between 1.6 and 1.7 meters.
6520
61cm (24 In.) Elevator Extension Installed
3,744.00
Requires Code 6930 or 6940 for ocean shipment.
Recommended for row spacing between 1.7 and 1.8 meters.
6530
86cm (34 In.) Elevator Extension Installed
4,294.00
Requires Code 6930 or 6940 for ocean shipment.
Recommended for row spacing between 1.8 and 1.9 meters.
OPERATOR MANUALS/DECALS
6700
English
No Charge
Includes operator manual and decals in English.
Required for USA.
6710
Spanish
No Charge
Includes operator manual in Spanish and text-free decals.
6720
French
No Charge
Includes operator manual in French and text-free decals.
6730
Portuguese
No Charge
Includes operator manual in Portuguese and text-free decals.
6740
Arabic
No Charge
Includes operator manual in Arabic and text-free decals.
6760
Vietnamese
No Charge
Includes operator manual in Vietnamese and text-free decals.
6770
English - Export
No Charge
Includes operator manual in English and non-text decals.
TRANSPORT PREP
6900
Domestic Shipping
In Base Price
Unit fully assembled with all blades installed.
6910
Mexico Shipping Prep
1,140.00
Unit assembled prepared for truck transport including a support stand for the elevator.
6920
Export Prep - Wood with 20 Ft. Container Shipment
1,863.00
Not available with Codes 6510, 6520 and 6530.
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 20 Ft. container. The main unit is ready for shipment as
Ro-Ro or on a flat rack.
6930
Export Prep - Metal with R/O R/O Unit
2,358.00
Elevator, topper, and other components are removed and packed on a metal pallet to be
shipped separately. The main unit is ready for shipment as Ro-Ro or on a flat rack.
6940
Export Prep - Wood with 40 Ft. Container Shipment
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 40 Ft. container. The main unit is ready for shipment as
Ro-Ro or on a flat rack.
27 February 2017 US & Canada
11-SUGARCANE- 6
1,863.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
TRANSPORT PREP ...Continued...
SPECIAL EQUIPMENT - FACTORY INSTALLED
7030
Crop Divider Vine Cutter Knives
459.00
Prevent vines from wrapping around crop dividers.
7090
Radio - AM/FM with Digital Tuner/Antenna/Speakers
657.00
7120
Side Windshield Wipers and Washers on Cab
1,286.00
7170
Mud Flap Agitator
1,136.00
Prevents mud buildup on flap located behind feed rollers and underneath chopper drum
assembly.
7230
In Cab Convex Mirror for Elevator
290.00
Increases visibility towards the elevator.
7240
HID Lighting - Cab (Two Lights)
1,163.00
Replaces two of the six cab base halogen lights with two HID lights.
7245
HID Lighting - Auxiliary (Two Lights)
978.00
Replaces the two base halogen lights (located on the cooling package side wall pointed
towards the elevator and wagon) and replaces with two HID lights.
7290
Secondary Floor Mat
744.00
For added comfort in cab. Reduces heat from engine compartment.
7610
Whole Top Collector Extension
583.00
Requires Code 5000.
Improves standard topper performance in heavy cane. It also helps handling cane flowers.
7640
Elevator Speed Control
1,277.00
Allows the operator to reduce the speed of the elevator in light crops thus reducing chain,
floor, wearstrip, sprocket, and bearing wear.
ATTACHMENTS - ORDER AS DESIRED
Accessories:
9420
Rotary Hand Pump For Hydraulic Oil
194.00
Recommended to fill up hydraulic tank when needed.
9400
Daily Service Tool Kit
541.00
Includes basic tools.
9410
Deluxe Tool Kit
1,082.00
Includes Code 9400 (Daily Service Tool Kit) and supplemental tools.
9430
Spanish Language for USA
Includes operator manual in Spanish and Spanish text decals to be installed by dealer or
customer in addition to operator manual and decals in English factory installed as per Code
6700.
ATTACHMENTS FOR FIELD CONVERSION
27 February 2017 US & Canada
11-SUGARCANE- 7
No Charge
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Engine:
CB11497417
8.1L to 9L Conversion Kit - Non EGR
48,155.80
Not available in countries requiring Tier III Emission Standards. The United States and
European countries do not allow these engines to be installed in off-road equipment. Please
check your local regulations before placing an order.
CB21500447
Field Cruise - 9.0L (3520)
213.40
Field Cruise maintains a constant engine speed and thus constant ground speed
as the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to
15% when working in light cane. Enables the operator to set the RPM to 2200 while cutting
heavy cane or while working in unfavorable field conditions.
CB11494506
Reversible Fan Software Change Kit (3510 with ABC)
1,157.20
This kit includes the connecting cable and the necessary software to reprogram the ABC when
installing Kit CB21486716. It can be used repeatedly to reprogram multiple units.
CB21486716
Reversing Fan Kit (3510 with ABC)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity. (Kit CB11494506 is required)
CB21486717
Reversing Fan Kit (3510 without ABC)
6,589.00
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
CB21491891
Reversing Fan Kit (3520)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
Feed:
BXT10022
Contour Basecutter Height Control and Floating Crop Dividers Kit
14,726.80
The floating control system allows the crop dividers to "float" following the interrow ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses the crop dividers position as a reference
of the ground height. Good field preparation is needed for optimum performance.
Kit includes all necessary software, mountings, hoses, fittings and hardware to be installed on
3520 units starting S/N 1T83520TCCT120704.
Dealer needs to communicate with factory for software installation.
Supplementary kit BXT10023 will be needed for units outside Louisiana, USA before S/N
1T83520WCDW121023.
A Supplementary kit (BXT10024 or BXT10025) will be needed for all units in Louisiana,
before S/N 1T83520WCDW121023.
BXT10023
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
2,911.70
Kit includes all necessary components to complement Kit BXT10022 when installing on 3520
units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023 (not for Louisiana
harvesters - see BXT10024 and BXT10025).
BXT10024
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023.
27 February 2017 US & Canada
11-SUGARCANE- 8
3,107.50
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
BXT10025
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
150.70
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units starting S/N 1T83520TCDT121201.
Topper:
BXT10012
Extended Width Whole Topper
Same Topper than the one used on the 3522 harvester. Extra width allows better tops
gathering for improved cleaning. Overall width is 2.4 m (93.1#) compared to 1.8 m (71.5#) on
the Standard whole topper. Kit includes the complete topper assembly to be mounted on a
3520 harvester existing boom in lieu of the factory installed topper.
27 February 2017 US & Canada
11-SUGARCANE- 9
7,187.40
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Track Sugarcane Billet Harvester
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
11-SUGARCANE- 10
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Equipment for Base Machine
3520 WHEEL SUGARCANE BILLET HARVESTER
Plastic Hood Wearliner
ENGINE:
John Deere 9.0 L PowerTech
with Turbo-Charger and Air-to-Air Aftercooler
251 Kw (337 hp) at 2100 RPM
Electronically Controlled Fuel Injection
Fuel Cooler
605 Liter Fuel Tank Capacity
High Capacity Air Pre-Cleaner and Filter
Fuel Water Separator
ELEVATOR:
Reinforced Structural Tube Frame
Loading to Either Side
Grease Cylinder Elevator Chain Adjustment
Motor Driven Directional Discharge
Hydraulic Lift Cylinders
Slew Wiper
TRANSMISSION AND CONTROLS:
Two Hydrostatic Pumps Providing
Variable Speed
0 to 24.6 km/h (15.3 mph)
Two Variable Displacement Motors
Electronic Ground Drive Control
TIRES:
Front: 14 x 17.5 - 14 PLY Skidder Tire
Rear: 23.5 x 25 - 20 PLY Industrial Tire
with Agriculture Lug
BRAKES AND STEERING:
Hydrostatic Steering
Oil Bath Brake System Spring
Applied with Hydraulic Release
ELECTRIC SYSTEM:
200 Amp Alternator
12 Volt
TOPPER:
Cuts Whole Tops
Accumulator Cushioned
BASECUTTER:
Hydraulic Piston Motor Drive
Bolt-On Wear Plates for Basecutter Legs
Two 61 cm (24 In.) Circular Discs,
Five Blades Each
CROP DIVIDERS TILT AND FEEDROLLERS TILT:
Manual Crop Divider and Knockdown Roller Tilt
Reversible Hydraulic Driven Crop Dividers
and Feedroller System
Ten 25.4 cm (10 In.) Diameter Feedrollers,
Including the Buttlifter
Factory Hard Surfaced Feedrollers with Teeth
External Floating Feedroller Stop Beneath
Each Feedroller Cradle
Three Paddle Closed Buttlifter
Billet Control Valve
CHOPPER:
Hydraulic Radial Piston Drive
38 cm (15 In.) Differential Chopper
Eight 95 mm Blades
Sill Roller
PRIMARY EXTRACTOR:
Plastic 152 cm (5 Ft.) Primary Extractor Hood
Hydrostatically Variable Speed
Vertical Mount, Direct Drive Fan
Four Blade Extractor Fan Requires No Balancing with Blade Change
Hydraulically Controlled Hood
Abrasive Resistant Steel Wear Ring
SECONDARY EXTRACTOR:
Plastic Hood
Hydraulically Controlled Hood Rotation
Hydraulically Driven Flap
OPERATORS STATION:
Forward Tilting Cab for Added Serviceability
Pressurized Cab with Heater
and Air Conditioner
Operator Air Suspension Seat and
Instructor/Training Seat
Full Length Curved Safety Windshield
Front Windshield Washer and Wiper
Left and Right Adjustable Rear View Mirrors Adjustable Width
One Fire Extinguisher
CommandARM armrest with:
CommandCenter Touch Display for:
Monitoring and Adjusting Harvester
and Engine Parameters
Warning Alarms and Diagnostic
Information Center
Multifunction Hydro Handle, Floats
with Seat, for:
Propulsion
Basecutter, Topper and Crop Dividers Height,
Bin Flap Position and Horn
Digital Cornerpost Display for:
Engine Coolant Temperature, Engine RPM,
Engine Horsepower Percent Load, Fuel Level,
Basecutter Pressure, Basecutter Height,
Basecutter Target Height
Primary Extractor Fan Speed, Hydraulic
Oil Temperature
Parking Brake Indicator
Master Warning Lights (MWL),
Turn Signals/Hazards
Signal and Warning Lights
GreenStar Ready
OTHERS:
Anti-Slip Platforms in Service Areas
Compliant with All Applicable
ASAE Standards
Hand Rails and High Grip Eruption Plate Footing
on All Service Areas
Reverse Alarm
Automatic Self-Cleaning Reversing Fan for
Hydraulic Oil and Engine Cooling Systems
Engine Compartment Work Light
10 Operating Lights (including Headlights)
Battery Remote Jump Start Terminals
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
0573T8
3520 Wheel Sugarcane Billet Harvester
379,383.00
MAIN FRAME
0901
Standard Frame
In Base Price
0911
Standard Frame - Half Track Mount
2,667.00
This option is required to install Half Track assemblies typically supplied by third party
companies in Australia. Half Track assemblies are not offered by John Deere. John Deere
does not guarantee that mount will fit all Half Track assemblies properly. Dealer and/or
customer must confirm with supplier to make sure that it will fit. Installing a Half Track
assembly will void the Final Drives warranty.
ENGINE
1000
John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 2
In Base Price
Option not available for USA, India, or CE. It includes the standard hydraulic system for the
Base Cutter and Chopper circuits.
1010
John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 2 and High Efficiency
Hydraulics
22,905.00
Option not available for USA, India, or CE. It includes the high efficiency hydraulics for the
Base Cutter and Chopper circuits. It is recommended for harvesting heavy green cane or
operations that require high ground speed.
1020
John Deere 9.0 L PowerTech 251 Kw (337 HP) @ 2100 RPM - Tier 3
9,500.00
Option only available for USA, India, and CE. It includes the standard hydraulic system for the
Base Cutter and Chopper circuits. Option not available for CE countries for arrival at
destination port after December 31st 2013.
1030
John Deere 9.0 L PowerTech 280 Kw (375 HP) @ 2100 RPM - Tier 3 and High Efficiency
Hydraulics
31,321.00
Option only available for USA. It includes the high efficiency hydraulics for the Base Cutter
and Chopper circuits. It is recommended for harvesting heavy green cane or operations that
require high ground speed.
HOMOLOGATION AND CE CERTIFICATION
3000
Standard Homologation
In Base Price
Not available for CE.
3010
CE Certification
9,735.00
Requires Code 1020.
3020
Homologation and Certification for India
Requires Code 1020.
HYDRAULIC OIL
27 February 2017 US & Canada
11-SUGARCANE- 2
9,735.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
HYDRAULIC OIL ...Continued...
3100
Standard - 10W30 Motor Oil
3110
RYKON 68 Hydraulic Fluid
In Base Price
769.00
BASECUTTER HEIGHT CONTROL AND CROP DIVIDERS FLOAT
CONTROL
3200
Standard Basecutter Height Control (Manual) and Crop Dividers without Floating Control
3220
Standard Basecutter Height Control (Manual) and Floating Crop Dividers
In Base Price
8,670.00
The floating control system allows the crop dividers to "float" following the interrow ground
profile. Good field preparation is needed for optimum performance.
3230
Contour Basecutter Height Control and Floating Crop Dividers
12,750.00
The floating control system allows the crop dividers to "float" following the interrow ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses the crop dividers position as a reference
of the ground height. Good field preparation is needed for optimum performance.
CANE TOPPER
5000
Whole Topper
5010
Shredder Topper
In Base Price
6,541.00
Recommended for green cane harvesting. Shredded tops are spread out better in the field, are
easier to incorporate in the soil when cultivating, and decompose faster.
5020
Shredder Topper with Piston Motor
8,555.00
Requires Code 1010 or 1030.
Recommended for heavy green cane harvesting. Shredded tops are spread out better in the
field, are easier to incorporate in the soil when cultivating and decompose faster. The
Hydraulic Piston Motor replaces the Standard Shredder Topper (Code 5020) gear motor to
give the topper additional power to cut the tops.
5030
Extended Width Whole Topper (Same as 3522)
4,488.00
Wider dimensions improve leaves and tops gathering.
CROP DIVIDER TILT AND KNOCKDOWN ROLLER TILT
5200
Manual Crop Divider and Knockdown Roller Tilt
5210
Hydraulic Crop Divider and Knockdown Roller Tilt
In Base Price
3,802.00
With this option, the Crop Dividers and the Front Knock Down Roller angle can be adjusted
quickly from the cab to adapt to different cane conditions in the field.
OUTER SCROLLS AND KNIVES
5300
Less Outer Scrolls and Less Side Knives
In Base Price
Recommended for light and straight cane.
5310
Right Hand Outer Scrolls and Right Hand Side Knife
Recommended for lodged and tangled cane and when the elevator is always positioned to load
the wagon to the left hand side of the harvester. The outside scroll rotates in opposite
direction of the right hand inside scroll to push the cane of the adjacent row away from the
machine. Stalks not separated upon reaching the side knives are cut before the harvester pulls
them from the ground.
27 February 2017 US & Canada
11-SUGARCANE- 3
5,880.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OUTER SCROLLS AND KNIVES ...Continued...
5330
Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife
10,505.00
Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction of
the inside scrolls to push the cane of the adjacent row away from the machine. Stalks not
separated upon reaching the side knives are cut before the harvester pulls them from the
ground.
5340
Right Hand and Left Hand Outer Scrolls and Less Side Knives
6,899.00
Recommended for light and lodged cane. The outside scrolls rotate in opposite direction of the
inside scrolls to push the cane of the adjacent row away from the machine.
CROP DIVIDER/KNOCK DOWN ROLLERS
5500
Less Crop Divider Knock Down Rollers
In Base Price
Recommended for light and straight cane.
5510
With Crop Divider Knock Down Rollers
3,753.00
Recommended for tall and/or lodged cane. These rollers help gently guide long, wrapping
cane to the center of the harvester's throat, which minimizes cane buildup at the top of the crop
divider.
BASE CUTTER DISC
5600
61 cm (24 In.) Circular
In Base Price
For dry harvesting conditions and provides a cleaner cut on stubble.
5610
55.9 cm (22 In.) Steel Circular
Same Price
Aids in the removal of rocks, soil, and other extraneous material.
5620
55.9 cm (22 In.) Scalloped
1,241.00
Aids in the removal of rocks, soil and other extraneous material.
BASE CUTTER LEGS
5650
Standard Legs
In Base Price
5660
Breakaway Basecutter Legs
2,324.00
Fuse will break to prevent major basecutter damage.
BUTTLIFTER
5700
3 Paddle Closed Buttlifter
5720
3 Paddle Open Buttlifter
In Base Price
445.00
Minimizes soil intake and mud buildup.
5730
4 Bar Open Buttlifter
524.00
Minimizes soil intake and mud buildup.
DIFFERENTIAL CHOPPER
5900
38 cm (15 In.) 95 mm Eight Blade Chopper System
In Base Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 In.).
5910
38 cm (15 In.) 95 mm Six Blade Chopper System
27 February 2017 US & Canada
11-SUGARCANE- 4
Same Price
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DIFFERENTIAL CHOPPER ...Continued...
Average billet lengths of approximately 230 to 250 mm (9 to 10 In.).
5920
38 cm (15 In.) 95 mm Eight Blade Overlap Chopper
Same Price
Average billet lengths of approximately 180 to 200 mm (7 to 8 In.). Improves feeding,
increases the life of the blades, and facilitates trash removal in the primary extractor.
5930
38 cm (15 In.) 95 mm Ten Blade Overlap Chopper
2,397.00
Average billet lengths of approximately 150 to 180 mm (6 to 7 In.). Shorter billets will increase
cane density in wagon. Overlap chopper improves feeding, increases the life of the blades, and
facilitates trash removal in the primary extractor.
SILL ROLLER
6010
Sill Roller
In Base Price
Facilitates billet movement, increases cleaning, and avoids "back feeding".
PRIMARY EXTRACTOR WEAR RING
6100
Abrasive Resistant Steel Wear Ring
6110
Duraliner (Vidaplate) Steel Wear Ring
In Base Price
3,248.00
Highly abrasive resistant material prolongs the life of the wear ring.
SECONDARY EXTRACTOR
6400
Secondary Extractor with Motor Driven Directional Discharge (1650 RPM)
In Base Price
Requires Code 1000 or 1020.
6420
Secondary Extractor with Motor Driven Directional Discharge - High Performance (1900
RPM)
570.00
Requires Code 1010 or 1030.
6430
Less Secondary Extractor
-2,257.00
Includes a metal hood that replaces the plastic hood.
ELEVATOR EXTENSION
6500
No Elevator Extension
In Base Price
Recommended for row spacing between 1.4 and 1.6 meters.
6510
30cm (12 In.) Elevator Extension Installed
2,634.00
Requires Code 6930 or 6940 for ocean shipment.
Recommended for row spacing between 1.6 and 1.7 meters.
6520
61cm (24 In.) Elevator Extension Installed
3,744.00
Requires Code 6430. Requires Code 6930 or 6940 for ocean shipment.
Recommended for row spacing between 1.7 and 1.8 meters.
OPERATOR MANUALS/DECALS
6700
English
No Charge
Includes operator manual and decals in English.
Required for USA.
27 February 2017 US & Canada
11-SUGARCANE- 5
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR MANUALS/DECALS ...Continued...
6710
Spanish
No Charge
Includes operator manual in Spanish and text-free decals.
6720
French
No Charge
Includes operator manual in French and text-free decals.
6730
Portuguese
No Charge
Includes operator manual in Portuguese and text-free decals.
6740
Arabic
No Charge
Includes operator manual in Arabic and text-free decals.
6750
Thai
No Charge
Includes operator manual in Thai and text-free decals.
6760
Vietnamese
No Charge
Includes operator manual in Vietnamese and text-free decals.
6770
English - Export
No Charge
Includes operator manual in English and non-text decals.
TRANSPORT PREP
6900
Domestic Shipping
In Base Price
Unit fully assembled with all blades installed.
6910
Mexico Shipping Prep
1,140.00
Unit assembled prepared for truck transport including a support stand for the elevator.
6920
Export Prep - Wood with 20 Ft. Container Shipment
1,863.00
Not available with Codes 6510, 6520 and 6530.
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 20 Ft. container. The main unit is ready for shipment as
Ro-Ro or on a flat rack.
6930
Export Prep - Metal with R/O R/O Unit
2,358.00
Elevator, topper, and other components are removed and packed on a metal pallet to be
shipped separately. The main unit is ready for shipment as Ro-Ro or on a flat rack.
6940
Export Prep - Wood with 40 Ft. Container Shipment
1,863.00
Elevator, crop dividers, topper, hand rails, and other components are removed and packed on
a wooden pallet to be shipped in a 40 Ft. container. The main unit is ready for shipment as
Ro-Ro or on a flat rack.
WHEELS AND TIRES
2000
Firestone Front Tires and GPX Rear Tires
In Base Price
Front: Firestone Super Traction 14-17.5 (10-Ply).
Rear: GPX (Galaxy) 23.5 x 25 (20-Ply) Industrial Tire with Ag Lug.
2010
Firestone Front Tires and Michelin Rear Tires
3,463.00
Front: Firestone Duraforce ND 14-17.5 (14-Ply).
Rear: Michelin 23.5 x 25 XHA Industrial Tire.
SPECIAL EQUIPMENT - FACTORY INSTALLED
7030
Crop Divider Vine Cutter Knives
27 February 2017 US & Canada
11-SUGARCANE- 6
459.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SPECIAL EQUIPMENT - FACTORY INSTALLED ...Continued...
Prevent vines from wrapping around crop dividers.
7090
Radio - AM/FM with Digital Tuner/Antenna/Speakers
657.00
7100
Speedometer
692.00
7120
Side Windshield Wipers and Washers on Cab
7230
In Cab Convex Mirror for Elevator
1,286.00
290.00
Increases visibility towards the elevator.
7240
HID Lighting - Cab (Two Lights)
1,163.00
Replaces two of the six cab base halogen lights with two HID lights.
7245
HID Lighting - Auxiliary (Two Lights)
978.00
Replaces the two base halogen lights (located on the cooling package side wall pointed
towards the elevator and wagon) and replaces with two HID lights.
7290
Secondary Floor Mat
744.00
For added comfort in cab. Reduces heat from engine compartment.
7610
Whole Top Collector Extension
583.00
Requires Code 5000.
Improves standard topper performance in heavy cane. It also helps handling cane flowers.
7640
Elevator Speed Control
1,277.00
Allows the operator to reduce the speed of the elevator in light crops thus reducing chain,
floor, wearstrip, sprocket, and bearing wear.
ATTACHMENTS - ORDER AS DESIRED
Accessories:
9420
Rotary Hand Pump For Hydraulic Oil
194.00
Recommended to fill up hydraulic tank when needed.
9400
Daily Service Tool Kit
541.00
Includes basic tools.
9410
Deluxe Tool Kit
1,082.00
Includes Code 9400 (Daily Service Tool Kit) and supplemental tools.
9430
Spanish Language for USA
No Charge
Includes operator manual in Spanish and Spanish text decals to be installed by dealer or
customer in addition to operator manual and decals in English factory installed as per Code
6700.
ATTACHMENTS FOR FIELD CONVERSION
Engine:
CB11497417
8.1L to 9L Conversion Kit - Non EGR
Not available in countries requiring Tier III Emission Standards. The United States and
European countries do not allow these engines to be installed in off-road equipment. Please
check your local regulations before placing an order.
27 February 2017 US & Canada
11-SUGARCANE- 7
48,155.80
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
CB21500447
Field Cruise - 9.0L (3520)
213.40
Field Cruise maintains a constant engine speed and thus constant ground speed
as the load on the harvester varies. Reducing to 2000 RPM will reduce fuel consumption up to
15% when working in light cane. Enables the operator to set the RPM to 2200 while cutting
heavy cane or while working in unfavorable field conditions.
CB11494506
Reversible Fan Software Change Kit (3510 with ABC)
1,157.20
This kit includes the connecting cable and the necessary software to reprogram the ABC when
installing Kit CB21486716. It can be used repeatedly to reprogram multiple units.
CB21486716
Reversing Fan Kit (3510 with ABC)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity. (Kit CB11494506 is required)
CB21486717
Reversing Fan Kit (3510 without ABC)
6,589.00
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
CB21491891
Reversing Fan Kit (3520)
5,386.70
Reversible cooling system fan with automatic cleaning cycle operates without a rotary screen.
This keeps the cooling system cool and clean while allowing the operator to focus on
productivity.
Feed:
BXT10022
Contour Basecutter Height Control and Floating Crop Dividers Kit
14,726.80
The floating control system allows the crop dividers to "float" following the interrow ground
profile. The contour basecutter height control system will adjust the basecutter position to
maintain a preset cane stool height. The control uses the crop dividers position as a reference
of the ground height. Good field preparation is needed for optimum performance.
Kit includes all necessary software, mountings, hoses, fittings and hardware to be installed on
3520 units starting S/N 1T83520TCCT120704.
Dealer needs to communicate with factory for software installation.
Supplementary kit BXT10023 will be needed for units outside Louisiana, USA before S/N
1T83520WCDW121023.
A Supplementary kit (BXT10024 or BXT10025) will be needed for all units in Louisiana,
before S/N 1T83520WCDW121023.
BXT10023
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
2,911.70
Kit includes all necessary components to complement Kit BXT10022 when installing on 3520
units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023 (not for Louisiana
harvesters - see BXT10024 and BXT10025).
BXT10024
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
3,107.50
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units from S/N 1T83520TCCT120704 to S/N 1T83520WCDW121023.
BXT10025
Supplementary kit for Contour Basecutter Height Control and Floating Crop Dividers Kit
(BXT10022)
Kit includes all necessary components to complement Kit BXT10022 when installing on
Louisiana 3520 units starting S/N 1T83520TCDT121201.
27 February 2017 US & Canada
11-SUGARCANE- 8
150.70
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
Topper:
BXT10012
Extended Width Whole Topper
Same Topper than the one used on the 3522 harvester. Extra width allows better tops
gathering for improved cleaning. Overall width is 2.4 m (93.1#) compared to 1.8 m (71.5#) on
the Standard whole topper. Kit includes the complete topper assembly to be mounted on a
3520 harvester existing boom in lieu of the factory installed topper.
27 February 2017 US & Canada
11-SUGARCANE- 9
7,187.40
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
3520 Wheel Sugarcane Billet Harvester
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
11-SUGARCANE- 10
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Equipment for Base Machine
CH330 Cane Harvester
ENGINE:
John Deere 6068H, PowerTech E, Tier 3
with Turbo-Charger and Air-to-Air
Aftercooler
148 Kw (198 HP) @ 2400 RPM with 6% Power Bulge
Electronically Controlled Fuel Injection
Fuel Cooler
284 Liter Fuel Tank Capacity
High Capacity Air Pre-Cleaner and Filter
30 Micron Primary Fuel Filter with Water Separator
2 Micron Secondary Fuel Filter
TRANSMISSION AND CONTROLS:
Permanent Four Wheel Drive
Two Hydrostatic Pumps propel 4 Wheel Motors
and provides Variable Speed
Three Speed Ranges with Shift on the Go
Traction slip prevention control system
Electronic Ground Drive Control
Maximum traveling speed of 18 km/h (11.2 mph)
TIRES:
Front: 11 x 20 - 12 Ply Rating
Rear: 20.5 X 25 - 16 Ply rating
Wheel weights for increased stability
BRAKES AND STEERING:
Hydrostatic Steering on front Frame Articulation
with Synchronized Steering Linkage
Dynamic Hydrostatic Braking System with Foot Pedal
Oil Bath Park Brake Systems - Spring
Applied with Hydraulic Release
ELECTRIC SYSTEM:
200 Amp Alternator
12 Volt
TOPPER:
Cuts Whole Tops
Accumulator Cushioned
Collector Drums
BASECUTTER:
Double Hydraulic Piston Motor Drive
Bolt-On Wear Plates for Basecutter Legs
Two 61 cm (24 In.) Circular Discs, Five Blades Each
CROP DIVIDERS AND FEEDROLLERS
Lower Knockdown Roller
Reversible Hydraulic Driven Crop Dividers
and Feedroller System
Crop Divider Knockdown Rollers
Nine 25.4 cm (10 In.) Diameter Feedrollers,
Including the Buttlifter
Factory Hard Surfaced Feedrollers with Teeth
External Floating Feedroller Stop Beneath
Each Feedroller Cradle
Closed Buttlifter
CHOPPER:
Double Hydraulic Motor Drive
30 cm (12") Overlap Chopper System
Six 95 mm Blades
Hydrostatic Drive with Variable Speed
Vertical Mount, Direct Drive Fan
Four Blade Extractor Fan Requires No Balancing with Blade Change
Hydraulically Controlled Hood
Abrasive Resistant Steel Wear Ring
ELEVATOR:
Adjustable Folding Elevator with
a hydraulically variable range of discharge
positions
Heavy Duty Aluminum Construction
Loading to Either Side
Grease Cylinder Elevator Chain Adjustment
In-Cab Controlled Variable Speed Elevator
Hydraulic Driven Elevator Discharge Flap
Perforated Steel Floor
OPERATORS STATION:
Forward Tilting Cab for Added Serviceability
Pressurized Cab with Heater and Air Conditioner
Operator Air Suspension Seat with
Instructor/Training Seat
Full Length Curved Laminated Safety Windshield
Front Windshield Washer and Wiper
Adjustable Left and Right Rear View Mirrors
In Cab Convex Mirror for Elevator
One Fire Extinguisher
CommandARM armrest with:
CommandCenter Touch Display for:
Monitoring and adjusting harvester and engine
parameters.
Warning Alarms and Diagnostic Information
Center
Multifunction Hydro Handle, floats with seat,
for:
Propulsion,
Basecutter, Topper and Crop Dividers Height,
Elevator Flap Position and Horn
Digital cornerpost display for:
Engine coolant temperature, Engine RPM,
Engine Horsepower % load, Fuel level,
Basecutter pressure, Basecutter height,
Basecutter target height
Primary extractor fan speed, Hydraulic oil
temperature
Parking brake indicator, Ground speed
Master Warning Lights (MWL), Turn signals/hazards
Signal and Warning Lights
OTHERS:
Anti-Slip Platforms in Service Areas
Compliant with all applicable standards
Hand Rails and Non Skid Surfaces
on All Service Areas
Reverse Alarm
Variable speed cooling fan
Automatic Self-Cleaning Reversing Fan for
Hydraulic Oil and Engine Cooling Systems
Engine Compartment Work Light
12 Operating Lights (including Headlights)
EXTRACTOR:
Plastic 120 cm (4 Ft.) Primary Extractor Hood
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
0596T8
CH330 Cane Harvester
346,882.00
0002
Angola
No Charge
0003
Benin
No Charge
0005
Burkina Faso
No Charge
0006
Burundi
No Charge
0007
Cameroon
No Charge
0009
Central African Republic
No Charge
0011
Chad
No Charge
0013
Congo, Republic of
No Charge
0014
Congo, Democratic Republic of
No Charge
0016
Egypt
No Charge
0017
Equatorial Guinea
No Charge
0019
Ethiopia
No Charge
0020
Gabon
No Charge
0021
Gambia
No Charge
0022
Ghana
No Charge
0023
Guinea
No Charge
0024
Guinea-Bissau
No Charge
0025
Ivory Coast
No Charge
0026
Kenya
No Charge
0028
Liberia
No Charge
0030
Madagascar
No Charge
0031
Malawi
No Charge
0034
Mauritius
No Charge
0035
Morocco
No Charge
0036
Mozambique
No Charge
DESTINATION
27 February 2017 US & Canada
11-SUGARCANE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0037
Namibia
No Charge
0039
Nigeria
No Charge
0040
Rwanda
No Charge
0043
Senegal
No Charge
0045
Sierra Leone
No Charge
0047
South Africa
No Charge
0048
Sudan
No Charge
0049
Swaziland
No Charge
0050
Tanzania
No Charge
0051
Togo
No Charge
0053
Uganda
No Charge
0054
Zambia
No Charge
0055
Zimbabwe
No Charge
0057
South Sudan
No Charge
0071
Cambodia
No Charge
0074
India
No Charge
Requires code 0409 and 9145
0075
Indonesia
No Charge
0086
Laos
No Charge
0088
Malaysia
No Charge
0093
Pakistan
No Charge
0094
Philippines
No Charge
0100
Sri Lanka
No Charge
0102
Taiwan
No Charge
0104
Thailand
No Charge
Requires code 0439
0109
Vietnam
No Charge
0182
Barbados
No Charge
0183
Belize
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 3
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
DESTINATION ...Continued...
0185
Costa Rica
No Charge
0188
Dominican Republic
No Charge
0189
El Salvador
No Charge
0191
Guatemala
No Charge
0192
Haiti
No Charge
0193
Honduras
No Charge
0194
Jamaica
No Charge
0195
Mexico
No Charge
0196
Nicaragua
No Charge
0197
Panama
No Charge
0201
Trinidad & Tobago
No Charge
0210
Argentina
No Charge
0211
Bolivia
No Charge
0214
Colombia
No Charge
0215
Ecuador
No Charge
0216
Guyana
No Charge
0217
Paraguay
No Charge
0218
Peru
No Charge
0219
Suriname
No Charge
0220
Uruguay
No Charge
0221
Venezuela
No Charge
0230
Australia
No Charge
0231
Fiji
No Charge
0239
Papua New Guinea
No Charge
0409
English
OPERATOR MANUALS/DECALS
No Charge
Includes non-text decals and English operator manual
0437
Spanish
No Charge
Includes non-text decals and Spanish operator manual
0413
French
No Charge
27 February 2017 US & Canada
11-SUGARCANE- 4
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
OPERATOR MANUALS/DECALS ...Continued...
Includes non-text decals and French operator manual
0439
Thai
No Charge
Includes non-text decals and Thai operator manual
REAR WHEEL DRIVE SYTEM, WHEELS AND TIRES
6721
Standard Rear Wheel Drive System. Tires: Front: 11 x 20 - 12 Ply Rating Rear: 20.5 X 25 16 Ply rating
In Base Price
1.43 m tread spacing.
6722
High Torque Rear Wheel Drive System. Tires: Front: 11 x 20 - 12 Ply Rating Rear: 600/70
R28 (23.5 X 28) R-1W
14,200.00
1.50 m tread spacing.
TRANSPORT PREP
7710
Domestic Shipping
In Base Price
Unit fully assembled with all blades installed.
7711
Export Prep - Mexico Shipping
1,186.00
Unit assembled prepared for truck transport.
7712
Export Prep - Wood w/20 Ft. Container Shipment
1,938.00
Elevator, crop dividers, topper, hand rails and other components
are removed and packed on a wooden pallet to be shipped in a 20'
container. The main unit is ready for shipment as Ro-Ro or on a flat rack.
7713
Export Prep - Metal with R/O R/O Unit
2,453.00
Elevator, topper and other components are removed and packed on a
metal pallet to be shipped separately. The main unit is ready for
shipment as Ro-Ro or on a flat rack.
7715
Export Prep - Containerized Shipment
5,729.00
Core machine, cab, cooling package, elevator, primary extractor, crop dividers, topper, hand
rails and other components are packed unassembled on metal skid to be shipped in a 40'
container. Dealer certification specific to this option is required to order 7715. Dealer is also
required to previously purchase the following Lifting Devices that can only be ordered using
the Manual Stock Order process (MSO) from the Thibodaux factory: Cooling Package Lifting
Device (Part Number IMD139418), Cab Lifting Device (Part Number IMD167750), and
Elevator Lifting Device (Part Number IMD168292).
ATTACHMENTS - ORDER AS DESIRED- FIELD INSTALLED
OPTIONS
Accessories:
9105
Rotary Hand Pump For Hydraulic Oil
202.00
Recommended to fill up hydraulic tank when needed.
9110
Daily Service Tool Kit
542.00
Includes basic tools.
27 February 2017 US & Canada
11-SUGARCANE- 5
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CH330 Cane Harvester
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
ATTACHMENTS - ORDER AS DESIRED- FIELD INSTALLED
OPTIONS ...Continued...
9120
Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife
8,593.00
Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction of
the inside scrolls to push the cane of the adjacent row away from the machine. Stalks not
separated upon reaching the side knives are cut before the harvester pulls them from the
ground.
9125
Right Hand and Left Hand Outer Scrolls and Less Side Knives
5,623.00
Recommended for light and lodged cane. The outside scrolls rotate in opposite direction of the
inside scrolls to push the cane of the adjacent row away from the machine.
9130
Front Knockdown Roller - Hydraulically Adjustable
3,925.00
Recommended for heavy, lodged and tangled cane.
9135
Crop Divider Vine Cutter Knives
404.00
Prevent vines from wrapping around crop dividers.
9145
Universal Homologatiion Kit
1,008.00
Includes India and China homologation components
6720
Standard Rear Wheel Drive System with Narrow Rear Tires. Front: 11 x 20 - 12 Ply Rating,
Rear: 17.5 X 25 - 16 Ply rating
Same Price
1.35 m tread spacing. Replaces code 6721.
ATTACHMENTS FOR FIELD CONVERSION
Feed:
BXT10005
Front Knockdown Roller - Hydraulically Adjustable
4,626.60
Recommended for heavy, lodged and tangled cane.
BXT10065
Right Hand and Left Hand Outer Scrolls and Less Side Knives
See Parts
Recommended for light and lodged cane. The outside scrolls rotate in opposite direction of the
inside scrolls to push the cane of the adjacent row away from the machine.
BXT10066
Right Hand and Left Hand Outer Scrolls and Right Hand and Left Hand Side Knife
See Parts
Recommended for lodged and tangled cane. The outside scrolls rotate in opposite direction of
the inside scrolls to push the cane of the adjacent row away from the machine. Stalks not
separated upon reaching the side knives are cut before the harvester pulls them from the
ground.
Service and Homologation
BXT10001
Rotary Hand Pump For Hydraulic Oil
238.70
Recommended to fill up hydraulic tank when needed.
BXT10009
Universal Homologatiion Kit
Includes India and China homologation components.
27 February 2017 US & Canada
11-SUGARCANE- 6
1,188.00
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CHSM Sugar Cane Harvester Simulator
Equipment for Base Machine
SUGAR CANE HARVESTER SIMULATOR
COMPUTER
The simulator runs on desktop PCs which meets or
exceeds
the following basic specifications:
Processor: 2.4 GHz Core2 CPU
Memory: 4 GB RAM
Connections: Four USB ports
Graphics Card: NVIDIA GeForce 460 GTX series
Audio: Creative Labs Sound Blaster Pro or better
2-Channel audio
Operating System: Windows 7 Professional 64-bit
SOFTWARE
Simulator uses the lattest version of software
available.
The simulation software process control inputs
and generates visual and audio cues to model the
harvester and field environment to support the
training lessons.
The LICENSE MANAGEMENT uses a hardware dongle which
plug into the Simulator#s PC via a USB port. The
use of a
dongle eliminates the need for John Deere to
generate a
license key after a customer has received the
simulator.
High performance, high durability Aluminum Frame
Adjustable operator#s seat
Steering wheel assembly
CommandARM# armrest mounted to seat
Digital cornerpost display
CommandCenter# Touch Display
Multifunction Hydro Handle
Overhead panel
Harvester foot pedals
TrackIR HEAD TRACKING SYSTEM
Allows the operator to change the view on the
simulator
display by moving his/her head.
MOTION PLATFORM
Motion platform simulates motion and vibration
cues based on
the simulated equipment performance and operator
actions
ENERGY REQUIREMENTS:
System: either 110/120 V or 240 V at 50-60 Hz.
Motion platform: 120V / 60 Hz power,
maximum of 5 amps (power converter capable of at
least
600 watts may be needed)
OPERATOR'S CONTROLS
Mounted to a simulator stand in the appropriate
location/orientation
as in the actual John Deere 3520 Sugar Cane
Harvester. It includes:
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
9SM1T8
CHSM Sugar Cane Harvester Simulator
1502
Simulator With Motion Platform
46,706.00
MOTION PLATFORM
Motion platform simulates motion and vibration cues based on the simulated equipment
performance and operator actions.
27 February 2017 US & Canada
11-SUGARCANE- 1
In Base Price
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
CHSM Sugar Cane Harvester Simulator
Continued
THIS PAGE IS INTENTIONALLY LEFT BLANK
27 February 2017 US & Canada
11-SUGARCANE- 2
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
1850 Self Propelled Cane Loader
Equipment for Base Machine
1850 SELF PROPELLED CANE LOADER
Four Wheel Drive
Boom Swings 90 Degrees to load wagons
positioned on the right hand side
ENGINE:
John Deere 4045T 105 HP (78 KW)
at 2300 RPM
Turbo Precleaner, Primary Filter and
Safety Element
TRANSMISSION:
Hydrostatic Ground Drive System with
2-Speed Transaxle and 2-Speed Motor
giving Infinitely Variable Speed in all of
Hydrostatic Drive
Max Speed - 18 MPH (29 KPH) in High Gear
AXLES:
Outboard Planetary Final Drives
Rear Axle - Oscillating and Steering
HYDRAULIC SYSTEM:
Machine Travel:
Variable Displacement Pump
0-44 GPM at 2300 RPM
2-Speed Motor
Max. 5500 PSI
Loading Function:
Double Pump
35 and 25 GPM at 2200 RPM
Max. 2500 PSI
Double Valve - Swing, Flex and Pile
Independent From Grab and Tilt
Priority Steering Valve on 25 GPM Pump
ELECTRIC SYSTEM:
CODE
12 Volt
120 Amp Alternator
1 Maintenance Free Battery
925 Amp Cold Cranking Power
STEERING AND BRAKES:
Rear Wheel Hydrostatic
Power Steering
Priority Oil Supply
Mechanical Spring Applied
Hydraulic Release Wet Disk Brake
Mounted in Axle Parking Brake
Hydrostatic Braking for Service Brakes
BOOM:
Dual Articulated Boom
MISCELLANEOUS:
23.1 x 26 Size Tires 12PR
Push Piler, Canopy, Muffler
Horn, Backup Alarm and Work Lights
Signal and Flasher Safety Lights with Slow Moving
Vehicle Symbol
Engine Warning System (Coolant Temperature and Oil
Pressure)
Air Cleaner Service Indicator
Counterweights - Three 500 Lbs.
Cab with Air Conditioner
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
0372T8
1850 Self Propelled Cane Loader
138,411.00
8000
English
No Charge
8010
Spanish
No Charge
8020
French
No Charge
8500
No Export Prep (US Market Only)
In Base Price
8501
Export Prep (Mexico Market Only)
964.00
OPERATOR'S MANUAL
SHIPPING PREPARATION
Unit with cab installed but piler not installed.
8502
Export Prep
1,884.00
Unit mounted on steel wheels for shipping in HC 40' container . Piler and cab (or canopy) not
installed.
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
1850 Self Propelled Cane Loader
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
WHEELS AND TIRES
2000
Wheels and Tires
In Base Price
23.1 X 26 12PR R1 - All Four Tires.
PILER
2100
Piler
In Base Price
Push type piler.
COUNTERWEIGHT
3010
Counterweight Package
In Base Price
Provides three 227 kg. (500 Lb.) counterweights installed on left hand side, opposite the boom.
Improves machine stability.
CAB OPERATOR'S STATION
2210
Cab with Air Conditioner
In Base Price
ATTACHMENTS FOR FIELD CONVERSION
Miscellaneous:
CB21471219
SP-1800 Engine Conversion Kit # CAT 3304 to JD4045T
Kit consists of a new John Deere 105HP (78KW) with its mounting skid, mounts,
mounting hardware, radiator, muffler, air cleaner assy, hoses and fittings.
It also includes pump drive, propulsion pump and motor, interconnect hoses/fittings
and controls. Also includes required hydraulic system hoses/fittings and filters
for the relocation of the existing functions vane pump. Kit also contains the
complete 12 Volt electrical system including new dash with gauges and switches,
wiring harness, lights, new battery box with battery, cables and disconnect switch.
NOTE # This kit is not designed for older SP1800 Loaders that had a taper shaft instead of a
spline shaft vane pump.
27 February 2017 US & Canada
11-SUGARCANE- 2
34,994.30
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
2254 Self Propelled Cane Loader
Equipment for Base Machine
2254 SELF PROPELLED CANE LOADER
Four Wheel Drive Loader with
Assisted Rear Wheel Drive
Boom Swings 180 Degrees to load wagons
positioned on the right or left hand sides
ENGINE:
John Deere Powered 6068T 200 HP
at 2400 RPM
3 Stage Air Cleaning System
BOOM:
6.1 Meter High Reach
180 Degree Right and Left Swing
Swing Cushioned at Both Extremes
GRAB:
1500 Kg. Capacity
ELECTRIC SYSTEM:
12 Volt
90 Amp Alternator
Two Sealed, 925 Amp Cold Cranking
Batteries
TRANSMISSION:
3 Speed
Hydrostatically Driven in Forward
or Reverse by an Infinitely Variable
56 GPM Max Pump
Hydrostatic Dynamic Braking
Front Axle Mechanical Parking Brake
HYDRAULIC SYSTEM:
Double Vane Pump
36 and 21 GPM at 2200 RPM
Driving All Functions Including Steering
High Capacity Oil Cooler
AXLE, WHEEL AND TIRE ASSEMBLIES:
Rigid Front Axle with Transmission
and Outboard Gear Final Drives
Rear Oscillating Steering with
Hydraulic Rear Final Planetary Drives
(2) 24.5 X 32 12PR R1
Front Wheel/Tire
(2) 18.4 X 26 6PR R1
Rear Wheel/Tire
OPERATOR'S STATION
Pressurized A/C Cab with
Improved Visibility
Joystick Controls
Oil Pressure/Water Temperature/
Voltmeter, Tachometer
MISCELLANEOUS:
Tropical Radiator and Oil Cooler
Working Lamps
Horn
303 Liter Fuel Tank
320 Liter Hydraulic System Oil Tank
Remote Engine Oil Drain
Oil Pressure/Water Temperature
Warning System
PILER:
Push Piler
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
Select One Code From Each Required Category
BASE MACHINE
EX-WORKS Thibodaux, Louisiana.
0031T8
2254 Self Propelled Cane Loader
242,044.00
8000
English
No Charge
8010
Spanish
No Charge
8020
French
No Charge
8500
No Export Prep (US Market Only)
In Base Price
8501
Export Prep (Mexico Market Only)
964.00
8503
Export Prep
OPERATOR'S MANUAL
SHIPPING PREPARATION
1,026.00
27 February 2017 US & Canada
11-SUGARCANE- 1
AGRICULTURAL PRODUCTS
JOHN DEERE SUGARCANE EQUIPMENT
2254 Self Propelled Cane Loader
Continued
CODE
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENT
IDENTIFIER
DESCRIPTION
SHIPPING PREPARATION ...Continued...
Unit fully assembled with piler and cab installed.
8510
Export Prep
1,828.00
Wheels, final drives, rear axle, piler and other components removed to ship in container. Main
unit with cab installed and prepared for Lift On - Lift Off Shipping.
WHEELS AND TIRES
2005
Front Tires 24.5 X 32 12PR R1Rear Tires 18.4 X 26 6PR R1
In Base Price
Requires Code 2500 or 2505.
2010
Front Tires 30.5 X 32 14PR R2Rear Tires 23.1 X 26 10PR R2
3,227.00
Requires Code 2510.
PILER
2100
Piler
In Base Price
Push type piler.
2130
10 Chain Piler
31,520.00
Optional Piler has two cleaning sections, each equipped with five chains that agitate the cane
while piling it to release soil and debris.
DRIVE SYSTEM
2500
Hydraulic Power Assist for 1.5M Row Spacing
In Base Price
Requires Code 2005. Loader is front wheel drive with selectable assisted rear wheel drive for
field conditions demanding more traction. Maximum Loader travelling speed is 29 KPH. With
this option the loader thread is 3.0 meters.
2505
Hydraulic Power Assist For 1.8M Row Spacing
4,544.00
Requires Code 2005. Loader is front wheel drive with selectable assisted rear wheel drive for
field conditions demanding more traction. Maximum Loader travelling speed is 29 KPH. The
front axle has extensions that bolt to the standard axle (option 2500) and extend the final
drives outwards. The front drive lines are longer. On the rear, a longer axle is used with a
longer tie rod. The hydraulic hoses going to the rear motors and the steering cylinders are also
longer. With this option the loader thread is 3.6 meters.
2510
High Traction Hydraulic Power Assist
The Loader is full time four wheel drive with this option. Recommended for muddy fields or
any other difficult ground condition where more traction is required. Maximum Loader
travelling speed is 16 KPH. With this option the loader thread is 3.0 meters.
27 February 2017 US & Canada
11-SUGARCANE- 2
15,761.00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement